Amd/Ati radeon hd 6320 Ekran Kartı Yükleme Sorunu

[hazar27]

Arkadaşlar iyi günler benim sorunum debian jessie 8.2 dağıtımına amd/ati ekran kartınını kuramam 4 gündür araştırmadığım site bakmadığım konu kalmadı son çarem olarak burada sorunlarımı paylaşıyorum arkadaşlar eyer yanlış bişey yapıyorsam lütfen kusurumu bağışlayın en son çare olarak tek umudum sizler kaldınız.
Gerekli Çıktıları verip daha önceden nasıl yol izlediğimi anlatıcam lütfen sizden ricam bana yardımcı olmanız..

Kod Seç Genişlet

sudo apt-get install mesa-utils
Çıktısı :

Kod Seç Genişlet

Paket listeleri okunuyor... Bitti
Bağımlılık ağacı oluşturuluyor       
Durum bilgisi okunuyor... Bitti     
mesa-utils zaten en yeni sürümde.
mesa-utils elle kurulmuş olarak ayarlandı.
Bunları düzeltmek için 'apt-get -f install' komutunu çalıştırmanız gerekebilir:
Aşağıdaki paketler karşılanmamış bağımlılıklara sahip:
fglrx-driver : Bağımlılıklar: libfglrx (= 1:14.9+ga14.201-2) ama kurulabilir değil
                Tavsiye ettikleri: fglrx-modules-dkms (= 1:14.9+ga14.201-2) ama kurulabilir değil ya da
                                   fglrx-kernel-14.9+ga14.201 ama kurulabilir değil
                Tavsiye ettikleri: libgl1-fglrx-glx-i386 ama kurulabilir değil
                Tavsiye ettikleri: fglrx-atieventsd ama kurulabilir değil
libgl1-fglrx-glx : Bağımlılıklar: libfglrx (= 1:14.9+ga14.201-2) ama kurulabilir değil
E: Karşılanmamış bağımlılıklar. 'apt-get -f install' komutunu paket seçeneği vermeden deneyin (ya da bir çözüm belirtin).


Kod Seç Genişlet

lspci | egrep "VGA|3D|Display"
Çıktısı :

Kod Seç Genişlet

00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6320]


Kod Seç Genişlet

glxinfo | grep render
Çıktısı :

Kod Seç Genişlet

glxinfo: error while loading shared libraries: libatiuki.so.1: cannot open shared object file: No such file or directory


Kod Seç Genişlet

glxinfo | grep render
Çıktısı :

Kod Seç Genişlet

glxinfo: error while loading shared libraries: libatiuki.so.1: cannot open shared object file: No such file or directory


Kod Seç Genişlet

xrandr
Çıktısı :

Kod Seç Genişlet

xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1366 x 768, current 1368 x 768, maximum 1368 x 768
default connected 1368x768+0+0 0mm x 0mm
   1366x768       0.00 
   1368x768       0.00*


Kod Seç Genişlet

dpkg -l | egrep "nvidia|bumblebee|nvidia-prime|fglrx"
Çıktısı :

Kod Seç Genişlet

iU  fglrx-driver                          1:14.9+ga14.201-2                    amd64        non-free ATI/AMD RadeonHD display driver
ii  glx-alternative-fglrx                 0.5.1                                amd64        allows the selection of FGLRX as GLX provider
iU  libfglrx-amdxvba1:amd64               1:14.9+ga14.201-2                    amd64        AMD XvBA (X-Video Bitstream Acceleration) runtime libraries
iU  libgl1-fglrx-glx:amd64                1:14.9+ga14.201-2                    amd64        proprietary libGL for the non-free ATI/AMD RadeonHD display driver
ii  nvidia-installer-cleanup              20141201+1                           amd64        cleanup after driver installation with the nvidia-installer



Arkadaşlar kendi denediğim yollar ise debianın deposunda amd/ati ekran kartı .deb uzantılı dosyayı indirdim ama kuramadım bağımlılık sorunu çıkardı depolarındada aratığımda paket bulunamadı diyor. Bu yüzden kurulmuyor


Diğer seçenek http://support.amd.com/en-us/download/desktop?os=Linux+x86  buradan amd/ati  driverin dosyalarını indirdim .run uzantılı dosyayı uç birimden kurdum kurulum sırasında amd/ati yükleyici paneli açıldı contine diyip devam ettiğimde ise Message[/size] diye bi hata ile karşılaştım.

[if]

Bu kart Northen Islands serisinden Wrestler kod adlı bir kartmış.[1] Gnome masaüstüyle fglrx sürücüsü şu an kullanılamıyormuş[2].

Önbilgilerden sonra, @hazar27 önce kurduğunuz fglrx paketlerini ve AMD'nin sitesinden indirdiğiniz sürücüyü kaldırın. Ardından bu[3] sayfadaki yönergeleri kullanarak kuruluma geçebilirsiniz.

[1] https://en.wikipedia.org/wiki/Radeon_HD_6000_Series
[2] https://www.debian.org/releases/jessie/amd64/release-notes/ch-information#gnome-fglrx
[3] https://wiki.debian.org/ATIProprietary

[hazar27]

Hocam ekran kartını tanıttım yardımlarınızdan dolayı çok teşşekkür ederim allah razı olsun hocam yalnız farklı sorunlar ortaya çıktı bilgisayar fanı hızlı çalışıyor ve baya gürültü yapıyo buna ne sebep olabilir hocam bide bilgisayar açılırken FAILED diye bi hatası var bu hatanın sebebi nedir hocam araştırdım ama bulamadım hatanın fotosunu veriyorum buyrun hocam




Hocam sizlere gerçekten çok teşşekkür ederim sizler olmazsanız linux ile barışık kalmamız çok zor *olacak ve belkide linux kullanmıyacaz sizden ve sizin gibilerinden allah razı olsun.

[if]

Hocam ekran kartını tanıttım yardımlarınızdan dolayı çok teşşekkür ederim Allah razı olsun hocam
Hocam sizlere gerçekten çok teşşekkür ederim sizler olmazsanız linux ile barışık kalmamız çok zor *olacak ve belkide linux kullanmıyacaz sizden ve sizin gibilerinden Allah razı olsun.

Amin! Yaptığım önemli bir şey değildi. Ben sadece sizi yönlendirdim, gerisini siz hallettiniz. Hocam demenize gerek yok, ben de sizin gibi sadece bir son kullanıcıyım.

Kod Seç Genişlet

Failed to start Load/Save Screen Backlight Brightness of acpi_video0.
hatasına eğilirsek önce, acpi_backlight=vendor çekirdek önyükleme parametesini[1] kullandığınızda sorunla karşılaşıyor musunuz?

Fan sorununuz için yeni bir konu açmanız daha uygun olur. Açacağınız konuda bilgisayarınızın marka ve modelini,

Kod Seç Genişlet

lspci komutunun çıktısını gerçerseniz konuya yardımcı olacak şahsa yardımcı olmuş olursunuz.

[1] http://wiki.ubuntu-tr.net/index.php?title=%C3%87ekirdek_%C3%B6ny%C3%BCkleme_se%C3%A7enekleri

[hazar27]

Hocam şuanlık çekirdek kullanımından kaynaklanan bi hata varmı bilmiyorum şuana kadarda sorun çıkarmadı ama bilgisayar biraz donuyor

Kod Seç Genişlet

lspci
Çıktısı Buyrun Hocam :

Kod Seç Genişlet

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6320]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Port
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Port
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
01:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
01:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth
02:00.0 Ethernet controller: Qualcomm Atheros AR8161 Gigabit Ethernet (rev 10)




Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 28 Aralık 2015 - 23:16:28
Hocam bide sıcaklık değerlerine bakarmısınız 68 derece gösteriyo normalmı bu

Kod Seç Genişlet

acpi -t
Çıktısı :

Kod Seç Genişlet

Thermal 0: ok, 68.0 degrees C


Kod Seç Genişlet

acpi
Çıktısı :

Kod Seç Genişlet

Thermal 0: ok, 68.0 degrees C
root@debian:/home/hazar# acpi
Battery 0: Full, 100%


Kod Seç Genişlet

acpi-c
Çıktısı :

Kod Seç Genişlet

Cooling 0: Processor 0 of 10
Cooling 1: Processor 0 of 10


Kod Seç Genişlet

sensors
Çıktısı :

Kod Seç Genişlet

acpitz-virtual-0
Adapter: Virtual device
temp1:        +68.0°C  (crit = +103.0°C)

k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +68.0°C  (high = +70.0°C)
                       (crit = +100.0°C, hyst = +97.0°C)

asus-isa-0000
Adapter: ISA adapter
temp1:        +68.0°C 

radeon-pci-0008
Adapter: PCI adapter
temp1:        +67.0°C  (crit = +120.0°C, hyst = +90.0°C)


[if]

@hazar27, önce fglrx sürücüsünün sorunsuz kurulup kurulmadığını öğrenelim.

Kod Seç Genişlet


dpkg -l | grep fglrx
glxinfo | grep render


Bilgisayarın marka ve modeli nedir?

Kod Seç Genişlet

dmesg çıktısına bakayım.

O sıcaklık değerleri yüksek. Sebebini öğrenmeye çalışalım.

[hazar27]

Hocam bilgisayar asus x55u amd64 bit işlemcili hocam ben ekran kartını  açık kaynak kodlu olanı tanıttım https://wiki.debian.org/AtiHowTo burdan tanıttım hocam

Kod Seç Genişlet

dpkg -l | grep fglrx Hoca bu kod da hiç birşey çıkmıyor..

Kod Seç Genişlet

glxinfo | grep render
Çıktısı :

Kod Seç Genişlet

direct rendering: Yes
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
OpenGL renderer string: Gallium 0.4 on AMD PALM
    GL_MESA_texture_signed_rgba, GL_NV_conditional_render, GL_NV_depth_clamp,
    GL_NV_blend_square, GL_NV_conditional_render, GL_NV_depth_clamp,
    GL_OES_fbo_render_mipmap, GL_OES_get_program_binary, GL_OES_mapbuffer,


Kod Seç Genişlet

dmesg
Çıktısı :

Kod Seç Genişlet

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt20-1+deb8u1 (2015-12-14)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=3b812a4f-bad8-4fd4-be1e-fff2f8aef369 ro quiet splash radeon.dpm=1
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b6563fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b6564000-0x00000000b66e7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b66e8000-0x00000000b67c6fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b67c7000-0x00000000b6cd8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b6cd9000-0x00000000b6cd9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b6cda000-0x00000000b6ce0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b6ce1000-0x00000000b70f1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b70f2000-0x00000000b73f2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b73f3000-0x00000000b73fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000012effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. X55U/X55U, BIOS X55U.423 08/06/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x12f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-CEFFF write-protect
[    0.000000]   CF000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0B7400000 mask FFFC00000 uncachable
[    0.000000]   3 base 0B7800000 mask FFF800000 uncachable
[    0.000000]   4 base 0B8000000 mask FF8000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000012f000000 aka 4848M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xb7400000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xb7400 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd6e0-0x000fd6ef] mapped at [ffff8800000fd6e0]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x12ee00000-0x12effffff]
[    0.000000]  [mem 0x12ee00000-0x12effffff] page 2M
[    0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x12c000000-0x12edfffff]
[    0.000000]  [mem 0x12c000000-0x12edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100001000-0x12bffffff]
[    0.000000]  [mem 0x100001000-0x1001fffff] page 4k
[    0.000000]  [mem 0x100200000-0x12bffffff] page 2M
[    0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0xb6563fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xb63fffff] page 2M
[    0.000000]  [mem 0xb6400000-0xb6563fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xb6cd9000-0xb6cd9fff]
[    0.000000]  [mem 0xb6cd9000-0xb6cd9fff] page 4k
[    0.000000] BRK [0x01af9000, 0x01af9fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xb6ce1000-0xb70f1fff]
[    0.000000]  [mem 0xb6ce1000-0xb6dfffff] page 4k
[    0.000000]  [mem 0xb6e00000-0xb6ffffff] page 2M
[    0.000000]  [mem 0xb7000000-0xb70f1fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xb73f3000-0xb73fffff]
[    0.000000]  [mem 0xb73f3000-0xb73fffff] page 4k
[    0.000000] RAMDISK: [mem 0x3620a000-0x370fcfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0x00000000B67A3070 000064 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000B67B1260 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140424/tbfadt-654)
[    0.000000] ACPI: DSDT 0x00000000B67A3170 00E0E9 (v02 _ASUS_ Notebook 00000000 INTL 20091112)
[    0.000000] ACPI: FACS 0x00000000B67BC080 000040
[    0.000000] ACPI: APIC 0x00000000B67B1370 000062 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000B67B13D8 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: ECDT 0x00000000B67B1420 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: MCFG 0x00000000B67B14E8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000B67B1528 000038 (v01 _ASUS_ Notebook 01072009 AMI  00000005)
[    0.000000] ACPI: SSDT 0x00000000B67B1560 0003DE (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000B67B1940 0016E4 (v02 AMD    ALIB     00000001 MSFT 04000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012effffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x12effffff]
[    0.000000]   NODE_DATA [mem 0x12eff7000-0x12effbfff]
[    0.000000]  [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012ac00000-ffff88012e1fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x12effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0xb6563fff]
[    0.000000]   node   0: [mem 0xb6cd9000-0xb6cd9fff]
[    0.000000]   node   0: [mem 0xb6ce1000-0xb70f1fff]
[    0.000000]   node   0: [mem 0xb73f3000-0xb73fffff]
[    0.000000]   node   0: [mem 0x100001000-0x12effffff]
[    0.000000] On node 0 totalpages: 940319
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10170 pages used for memmap
[    0.000000]   DMA32 zone: 743811 pages, LIFO batch:31
[    0.000000]   Normal zone: 2632 pages used for memmap
[    0.000000]   Normal zone: 192511 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb6564000-0xb66e7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb66e8000-0xb67c6fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb67c7000-0xb6cd8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb6cda000-0xb6ce0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb70f2000-0xb73f2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7400000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[    0.000000] e820: [mem 0xb7400000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88012ec00000 s80896 r8192 d21504 u1048576
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 927440
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=3b812a4f-bad8-4fd4-be1e-fff2f8aef369 ro quiet splash radeon.dpm=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3612792K/3761276K available (5219K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss, 148484K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1646.934 MHz processor
[    0.000067] Calibrating delay loop (skipped), value calculated using timer frequency.. 3293.86 BogoMIPS (lpj=6587736)
[    0.000075] pid_max: default: 32768 minimum: 301
[    0.000101] ACPI: Core revision 20140424
[    0.033015] ACPI: All ACPI Tables successfully acquired
[    0.033116] Security Framework initialized
[    0.033136] AppArmor: AppArmor disabled by boot time parameter
[    0.033140] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.033718] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.036214] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.037428] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.037445] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.037982] Initializing cgroup subsys memory
[    0.038002] Initializing cgroup subsys devices
[    0.038022] Initializing cgroup subsys freezer
[    0.038029] Initializing cgroup subsys net_cls
[    0.038042] Initializing cgroup subsys blkio
[    0.038052] Initializing cgroup subsys perf_event
[    0.038058] Initializing cgroup subsys net_prio
[    0.038116] tseg: 00b7400000
[    0.038122] CPU: Physical Processor ID: 0
[    0.038125] CPU: Processor Core ID: 0
[    0.038129] mce: CPU supports 6 MCE banks
[    0.038148] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
tlb_flushall_shift: 6
[    0.038338] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[    0.042567] ftrace: allocating 21679 entries in 85 pages
[    0.062910] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.102624] smpboot: CPU0: AMD E-450 APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
[    0.209011] Performance Events: AMD PMU driver.
[    0.209021] ... version:                0
[    0.209024] ... bit width:              48
[    0.209026] ... generic registers:      4
[    0.209029] ... value mask:             0000ffffffffffff
[    0.209031] ... max period:             00007fffffffffff
[    0.209034] ... fixed-purpose events:   0
[    0.209036] ... event mask:             000000000000000f
[    0.212270] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.212581] x86: Booting SMP configuration:
[    0.212587] .... node  #0, CPUs:      #1
[    0.225737] x86: Booted up 1 node, 2 CPUs
[    0.225743] smpboot: Total of 2 processors activated (6587.73 BogoMIPS)
[    0.226642] devtmpfs: initialized
[    0.234103] PM: Registering ACPI NVS region [mem 0xb66e8000-0xb67c6fff] (913408 bytes)
[    0.234157] PM: Registering ACPI NVS region [mem 0xb6cda000-0xb6ce0fff] (28672 bytes)
[    0.236734] pinctrl core: initialized pinctrl subsystem
[    0.236966] NET: Registered protocol family 16
[    0.237310] cpuidle: using governor ladder
[    0.237317] cpuidle: using governor menu
[    0.237514] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.237519] ACPI: bus type PCI registered
[    0.237524] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.237758] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.237765] PCI: not using MMCONFIG
[    0.237768] PCI: Using configuration type 1 for base access
[    0.237770] PCI: Using configuration type 1 for extended access
[    0.238135] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.238138] mtrr: probably your BIOS does not setup all CPUs.
[    0.238140] mtrr: corrected configuration.
[    0.251254] ACPI: Added _OSI(Module Device)
[    0.251262] ACPI: Added _OSI(Processor Device)
[    0.251265] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.251268] ACPI: Added _OSI(Processor Aggregator Device)
[    0.254100] ACPI : EC: EC description table is found, configuring boot EC
[    0.257109] ACPI: Executed 1 blocks of module-level executable AML code
[    0.261888] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.274184] ACPI: Interpreter enabled
[    0.274204] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.274217] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.274250] ACPI: (supports S0 S3 S4 S5)
[    0.274254] ACPI: Using IOAPIC for interrupt routing
[    0.274566] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.274676] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.275528] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.394799] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.409681] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.409698] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.410321] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.411315] PCI host bridge to bus 0000:00
[    0.411323] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.411328] pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
[    0.411333] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
[    0.411337] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
[    0.411343] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.411347] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.411352] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.411356] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
[    0.411372] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[    0.411579] pci 0000:00:01.0: [1002:9806] type 00 class 0x030000
[    0.411598] pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[    0.411610] pci 0000:00:01.0: reg 0x14: [io  0xf000-0xf0ff]
[    0.411621] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
[    0.411687] pci 0000:00:01.0: supports D1 D2
[    0.411849] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[    0.411866] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
[    0.411943] pci 0000:00:01.1: supports D1 D2
[    0.412152] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
[    0.412238] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.412417] pci 0000:00:05.0: [1022:1513] type 01 class 0x060400
[    0.412502] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.412728] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
[    0.412762] pci 0000:00:10.0: reg 0x10: [mem 0xfeb48000-0xfeb49fff 64bit]
[    0.412903] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.413007] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.413136] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[    0.413165] pci 0000:00:11.0: reg 0x10: [io  0xf140-0xf147]
[    0.413180] pci 0000:00:11.0: reg 0x14: [io  0xf130-0xf133]
[    0.413194] pci 0000:00:11.0: reg 0x18: [io  0xf120-0xf127]
[    0.413209] pci 0000:00:11.0: reg 0x1c: [io  0xf110-0xf113]
[    0.413224] pci 0000:00:11.0: reg 0x20: [io  0xf100-0xf10f]
[    0.413239] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4d000-0xfeb4d7ff]
[    0.413454] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[    0.413476] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4c000-0xfeb4cfff]
[    0.413633] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.413769] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[    0.413798] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4b000-0xfeb4b0ff]
[    0.413910] pci 0000:00:12.2: supports D1 D2
[    0.413914] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.414007] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.414125] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.414362] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.414394] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
[    0.414485] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.414575] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.414667] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.414927] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[    0.415141] pci 0000:00:14.7: [1022:7806] type 00 class 0x080501
[    0.415169] pci 0000:00:14.7: reg 0x10: [mem 0xfeb4a000-0xfeb4a0ff 64bit]
[    0.415387] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[    0.415568] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[    0.415743] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[    0.415926] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[    0.416117] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[    0.416293] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[    0.416469] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[    0.416644] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[    0.418664] pci 0000:01:00.0: [1814:3290] type 00 class 0x028000
[    0.420334] pci 0000:01:00.0: reg 0x10: [mem 0xfea10000-0xfea1ffff]
[    0.422145] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.423949] pci 0000:01:00.1: [1814:3298] type 00 class 0x0d1100
[    0.424001] pci 0000:01:00.1: reg 0x10: [mem 0xfea00000-0xfea0ffff]
[    0.425812] pci 0000:01:00.1: supports D1
[    0.425817] pci 0000:01:00.1: PME# supported from D0 D1 D3hot D3cold
[    0.435631] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.435650] pci 0000:00:04.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.435933] pci 0000:02:00.0: [1969:1091] type 00 class 0x020000
[    0.435969] pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe93ffff 64bit]
[    0.435986] pci 0000:02:00.0: reg 0x18: [io  0xe000-0xe07f]
[    0.436110] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.436175] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.442033] pci 0000:00:05.0: PCI bridge to [bus 02]
[    0.442050] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.442057] pci 0000:00:05.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.442264] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[    0.442281] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af] (subtractive decode)
[    0.442286] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
[    0.442290] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df] (subtractive decode)
[    0.442295] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.442300] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.442304] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.442309] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[    0.442388] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.443665] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[    0.443826] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[    0.443988] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[    0.444150] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[    0.444286] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[    0.444399] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[    0.444513] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[    0.444625] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[    0.445187] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.445349] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    0.445829] vgaarb: setting as boot device: PCI:0000:00:01.0
[    0.445838] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.445853] vgaarb: loaded
[    0.445856] vgaarb: bridge control possible 0000:00:01.0
[    0.446028] PCI: Using ACPI for IRQ routing
[    0.456997] PCI: pci_cache_line_size set to 64 bytes
[    0.457084] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.457088] e820: reserve RAM buffer [mem 0xb6564000-0xb7ffffff]
[    0.457092] e820: reserve RAM buffer [mem 0xb6cda000-0xb7ffffff]
[    0.457095] e820: reserve RAM buffer [mem 0xb70f2000-0xb7ffffff]
[    0.457098] e820: reserve RAM buffer [mem 0xb7400000-0xb7ffffff]
[    0.457102] e820: reserve RAM buffer [mem 0x12f000000-0x12fffffff]
[    0.457412] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.457422] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.459520] Switched to clocksource hpet
[    0.472330] pnp: PnP ACPI init
[    0.472363] ACPI: bus type PNP registered
[    0.472661] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.472671] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.473286] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.473293] system 00:01: [io  0x040b] has been reserved
[    0.473298] system 00:01: [io  0x04d6] has been reserved
[    0.473303] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.473308] system 00:01: [io  0x0c14] has been reserved
[    0.473313] system 00:01: [io  0x0c50-0x0c51] has been reserved
[    0.473318] system 00:01: [io  0x0c52] has been reserved
[    0.473323] system 00:01: [io  0x0c6c] has been reserved
[    0.473327] system 00:01: [io  0x0c6f] has been reserved
[    0.473332] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.473337] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.473342] system 00:01: [io  0x0cd4-0x0cd5] has been reserved
[    0.473347] system 00:01: [io  0x0cd6-0x0cd7] has been reserved
[    0.473352] system 00:01: [io  0x0cd8-0x0cdf] has been reserved
[    0.473357] system 00:01: [io  0x0800-0x089f] could not be reserved
[    0.473362] system 00:01: [io  0x0900-0x090f] has been reserved
[    0.473367] system 00:01: [io  0x0910-0x091f] has been reserved
[    0.473372] system 00:01: [io  0xfe00-0xfefe] has been reserved
[    0.473379] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.473384] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.473390] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.473395] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.473400] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.473406] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[    0.473412] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[    0.473418] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.473514] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.473674] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.473682] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.473797] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.473907] system 00:05: [io  0x0240-0x0259] has been reserved
[    0.473915] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.474104] pnp 00:06: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.474223] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    0.474566] system 00:08: [mem 0xb8000000-0xcfffffff] has been reserved
[    0.474574] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.475135] pnp: PnP ACPI: found 9 devices
[    0.475139] ACPI: bus type PNP unregistered
[    0.488022] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.488037] pci 0000:00:04.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.488048] pci 0000:00:05.0: PCI bridge to [bus 02]
[    0.488054] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.488062] pci 0000:00:05.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.488072] pci 0000:00:14.4: PCI bridge to [bus 03]
[    0.488092] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
[    0.488097] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
[    0.488101] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
[    0.488106] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
[    0.488110] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[    0.488114] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[    0.488119] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
[    0.488124] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.488128] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.488133] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.488138] pci_bus 0000:03: resource 4 [io  0x0000-0x03af]
[    0.488142] pci_bus 0000:03: resource 5 [io  0x03e0-0x0cf7]
[    0.488146] pci_bus 0000:03: resource 6 [io  0x03b0-0x03df]
[    0.488150] pci_bus 0000:03: resource 7 [io  0x0d00-0xffff]
[    0.488155] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
[    0.488159] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
[    0.488163] pci_bus 0000:03: resource 10 [mem 0xd0000000-0xffffffff]
[    0.488280] NET: Registered protocol family 2
[    0.488840] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.489040] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.489295] TCP: Hash tables configured (established 32768 bind 32768)
[    0.489393] TCP: reno registered
[    0.489416] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.489471] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.489708] NET: Registered protocol family 1
[    0.489752] pci 0000:00:01.0: Video device with shadowed ROM
[    0.588357] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[    0.588371] PCI: CLS 64 bytes, default 64
[    0.588513] Unpacking initramfs...
[    1.164184] Freeing initrd memory: 15308K (ffff88003620a000 - ffff8800370fd000)
[    1.164240] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.164247] software IO TLB [mem 0xb2564000-0xb6564000] (64MB) mapped at [ffff8800b2564000-ffff8800b6563fff]
[    1.164692] microcode: CPU0: patch_level=0x0500010d
[    1.164762] microcode: CPU1: patch_level=0x0500010d
[    1.165043] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.165063] LVT offset 0 assigned for vector 0x400
[    1.165136] perf: AMD IBS detected (0x000000ff)
[    1.165951] futex hash table entries: 512 (order: 3, 32768 bytes)
[    1.166041] audit: initializing netlink subsys (disabled)
[    1.166088] audit: type=2000 audit(1451343283.052:1): initialized
[    1.166974] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.167030] zbud: loaded
[    1.167506] VFS: Disk quotas dquot_6.5.2
[    1.167591] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.167737] msgmni has been set to 7086
[    1.168684] alg: No test for stdrng (krng)
[    1.168768] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.168879] io scheduler noop registered
[    1.168887] io scheduler deadline registered
[    1.168980] io scheduler cfq registered (default)
[    1.169385] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[    1.169656] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[    1.169837] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[    1.169843] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.169847] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[    1.169854] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[    1.169889] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[    1.169894] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.169900] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[    1.169941] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.169984] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.170106] GHES: HEST is not enabled!
[    1.170423] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.171602] Linux agpgart interface v0.103
[    1.171959] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.173997] i8042: Detected active multiplexing controller, rev 1.1
[    1.175047] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.175062] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.175131] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.175193] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.175254] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.175786] mousedev: PS/2 mouse device common for all mice
[    1.175996] rtc_cmos 00:02: RTC can wake from S4
[    1.176239] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.176285] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.176324] ledtrig-cpu: registered to indicate activity on CPUs
[    1.176870] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    1.176873] AMD IOMMUv2 functionality not available on this system
[    1.177060] TCP: cubic registered
[    1.177181] NET: Registered protocol family 10
[    1.177658] mip6: Mobile IPv6
[    1.177690] NET: Registered protocol family 17
[    1.177705] mpls_gso: MPLS GSO support
[    1.178456] registered taskstats version 1
[    1.179322] rtc_cmos 00:02: setting system clock to 2015-12-28 22:54:43 UTC (1451343283)
[    1.179505] PM: Hibernation image not present or could not be loaded.
[    1.181778] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[    1.181786] Write protecting the kernel read-only data: 8192k
[    1.182708] Freeing unused kernel memory: 912K (ffff88000151c000 - ffff880001600000)
[    1.183953] Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
[    1.213955] systemd-udevd[60]: starting version 215
[    1.214567] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.214808] random: systemd-udevd urandom read with 3 bits of entropy available
[    1.278536] ACPI: bus type USB registered
[    1.278608] usbcore: registered new interface driver usbfs
[    1.278639] usbcore: registered new interface driver hub
[    1.280270] thermal LNXTHERM:00: registered as thermal_zone0
[    1.280277] ACPI: Thermal Zone [THRM] (74 C)
[    1.280648] usbcore: registered new device driver usb
[    1.285401] SCSI subsystem initialized
[    1.289908] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.290601] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.291020] ehci-pci: EHCI PCI platform driver
[    1.291305] QUIRK: Enable AMD PLL fix
[    1.291351] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.291367] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.291380] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.291397] ehci-pci 0000:00:12.2: debug port 1
[    1.291476] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4b000
[    1.296224] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [10:bf:48:66:fe:95]
[    1.296672] libata version 3.00 loaded.
[    1.298309] sdhci: Secure Digital Host Controller Interface driver
[    1.298316] sdhci: Copyright(c) Pierre Ossman
[    1.300330] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.301127] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.301134] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.301139] usb usb1: Product: EHCI Host Controller
[    1.301143] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    1.301147] usb usb1: SerialNumber: 0000:00:12.2
[    1.302381] hub 1-0:1.0: USB hub found
[    1.302929] hub 1-0:1.0: 5 ports detected
[    1.307826] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.307847] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    1.308196] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
[    1.308207] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[    1.308216] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[    1.309800] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.309807] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.309811] usb usb2: Product: xHCI Host Controller
[    1.309815] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    1.309819] usb usb2: SerialNumber: 0000:00:10.0
[    1.310816] hub 2-0:1.0: USB hub found
[    1.311396] hub 2-0:1.0: 2 ports detected
[    1.312992] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.313011] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[    1.314225] ohci-pci: OHCI PCI platform driver
[    1.314558] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.315100] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    1.315106] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.315110] usb usb3: Product: xHCI Host Controller
[    1.315113] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    1.315117] usb usb3: SerialNumber: 0000:00:10.0
[    1.316807] hub 3-0:1.0: USB hub found
[    1.317279] hub 3-0:1.0: 2 ports detected
[    1.325003] ahci 0000:00:11.0: version 3.0
[    1.325287] ahci 0000:00:11.0: irq 45 for MSI/MSI-X
[    1.325374] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.325381] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    1.344409] scsi0 : ahci
[    1.347861] scsi1 : ahci
[    1.348085] ata1: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d100 irq 45
[    1.348093] ata2: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d180 irq 45
[    1.348231] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7806] (rev 0)
[    1.348476] mmc0: no vqmmc regulator found
[    1.348480] mmc0: no vmmc regulator found
[    1.349113] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
[    1.349414] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.349438] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[    1.349517] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4c000
[    1.408332] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.408341] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.408345] usb usb4: Product: OHCI PCI host controller
[    1.408349] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    1.408353] usb usb4: SerialNumber: 0000:00:12.0
[    1.408898] hub 4-0:1.0: USB hub found
[    1.408926] hub 4-0:1.0: 5 ports detected
[    1.840383] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.840434] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.846851] ata1.00: ATA-8: ST320LM001 HN-M320MBB, 2AR10001, max UDMA/133
[    1.846860] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.853360] ata1.00: configured for UDMA/133
[    1.853904] scsi 0:0:0:0: Direct-Access     ATA      ST320LM001 HN-M3 0001 PQ: 0 ANSI: 5
[    1.855737] ata2.00: ATAPI: PIONEER DVD-RW DVRTD11RS, 1.05, max UDMA/100
[    1.868960] ata2.00: configured for UDMA/100
[    1.876382] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.886537] scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW DVRTD11RS 1.05 PQ: 0 ANSI: 5
[    1.918951] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.918961] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.919106] sd 0:0:0:0: [sda] Write Protect is off
[    1.919113] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.919178] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.928845] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.928860] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.929202] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.930937] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.931257] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.973668]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    1.975350] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.116063] usb 1-2: New USB device found, idVendor=1bcf, idProduct=2883
[    2.116078] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.116087] usb 1-2: Product: ASUS USB2.0 Webcam
[    2.116095] usb 1-2: Manufacturer: 04G626000611BQ2BB000LFR
[    2.164304] tsc: Refined TSC clocksource calibration: 1647.004 MHz
[    2.552464] usb 4-1: new full-speed USB device number 2 using ohci-pci
[    2.667842] PM: Starting manual resume from disk
[    2.667855] PM: Hibernation image partition 8:5 present
[    2.667858] PM: Looking for hibernation image.
[    2.668253] PM: Image not found (code -22)
[    2.668261] PM: Hibernation image not present or could not be loaded.
[    2.719903] usb 4-1: New USB device found, idVendor=248a, idProduct=8366
[    2.719919] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.719928] usb 4-1: Product: Wireless Receiver
[    2.719934] usb 4-1: Manufacturer: Telink
[    2.724659] hidraw: raw HID events driver (C) Jiri Kosina
[    2.731546] usbcore: registered new interface driver usbhid
[    2.731553] usbhid: USB HID core driver
[    2.734113] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/0003:248A:8366.0001/input/input5
[    2.734368] hid-generic 0003:248A:8366.0001: input,hidraw0: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-0000:00:12.0-1/input0
[    2.840798] usb 2-2: new low-speed USB device number 2 using xhci_hcd
[    2.858379] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    3.006011] usb 2-2: New USB device found, idVendor=1c4f, idProduct=0002
[    3.006027] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.006037] usb 2-2: Product: USB Keykoard
[    3.006044] usb 2-2: Manufacturer: SIGMACH1P
[    3.006411] usb 2-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    3.006429] usb 2-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[    3.020774] input: SIGMACH1P USB Keykoard as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/0003:1C4F:0002.0002/input/input6
[    3.020919] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACH1P USB Keykoard] on usb-0000:00:10.0-2/input0
[    3.035009] input: SIGMACH1P USB Keykoard as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/0003:1C4F:0002.0003/input/input7
[    3.035293] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACH1P USB Keykoard] on usb-0000:00:10.0-2/input1
[    3.165238] Switched to clocksource tsc
[    3.244941] random: nonblocking pool is initialized
[    3.561398] systemd[1]: Configuration file /etc/systemd/system.conf is marked executable. Please remove executable permission bits. Proceeding anyway.
[    3.561417] systemd[1]: Configuration file /etc/systemd/system.conf is marked world-writable. Please remove world writability permission bits. Proceeding anyway.
[    5.128630] systemd-sysv-generator[136]: Overwriting existing symlink /run/systemd/generator.late/skeleton.service with real service
[    6.416260] systemd-journald[153]: Configuration file /etc/systemd/journald.conf is marked executable. Please remove executable permission bits. Proceeding anyway.
[    6.416278] systemd-journald[153]: Configuration file /etc/systemd/journald.conf is marked world-writable. Please remove world writability permission bits. Proceeding anyway.
[    6.625105] lp: driver loaded but no devices found
[    6.731724] ppdev: user-space parallel port driver
[    6.799652] fuse init (API version 7.23)
[    6.963753] systemd-udevd[167]: starting version 215
[    8.540833] ACPI: acpi_idle registered with cpuidle
[    8.553309] acpi-cpufreq: overriding BIOS provided _PSD data
[    8.558401] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8
[    8.558414] ACPI: Power Button [PWRB]
[    8.558570] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9
[    8.579431] ACPI: Lid Switch [LID]
[    8.580169] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10
[    8.580187] ACPI: Sleep Button [SLPB]
[    8.582700] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
[    8.582719] ACPI: Power Button [PWRF]
[    8.663563] ACPI: AC Adapter [AC0] (on-line)
[    8.779572] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[    8.873816] wmi: Mapper loaded
[    8.876803] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.921902] ACPI: Battery Slot [BAT0] (battery present)
[    9.006751] systemd-journald[153]: Received request to flush runtime journal from PID 1
[    9.042213] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    9.054154] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    9.055936] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SBSM) (20140424/utaddress-254)
[    9.055954] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.061775] acpi device:4f: registered as cooling_device2
[    9.061953] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[    9.217342] [drm] Initialized drm 1.1.0 20060810
[    9.318442] snd_hda_intel 0000:00:01.1: irq 46 for MSI/MSI-X
[    9.521242] input: PC Speaker as /devices/platform/pcspkr/input/input13
[    9.658349] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input14
[   10.117584] sound hdaudioC1D0: autoconfig: line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:speaker
[   10.117602] sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.117612] sound hdaudioC1D0:    hp_outs=1 (0x25/0x0/0x0/0x0/0x0)
[   10.117620] sound hdaudioC1D0:    mono: mono_out=0x0
[   10.117627] sound hdaudioC1D0:    inputs:
[   10.117636] sound hdaudioC1D0:      Mic=0x2b
[   10.117644] sound hdaudioC1D0:      Internal Mic=0x29
[   10.125295] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input19
[   10.125460] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input20
[   10.223454] psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[   10.713795] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[   10.726337] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[   10.746252] [drm] radeon kernel modesetting enabled.
[   10.796547] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input18
[   10.963699] [drm] initializing kernel modesetting (PALM 0x1002:0x9806 0x1043:0x14E7).
[   10.963753] [drm] register mmio base: 0xFEB00000
[   10.963759] [drm] register mmio size: 262144
[   10.963933] ATOM BIOS: AMD
[   10.964136] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[   10.964149] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[   10.964156] [drm] Detected VRAM RAM=384M, BAR=256M
[   10.964161] [drm] RAM width 32bits DDR
[   10.964389] [TTM] Zone  kernel: Available graphics memory: 1815224 kiB
[   10.964396] [TTM] Initializing pool allocator
[   10.964415] [TTM] Initializing DMA pool allocator
[   10.964498] [drm] radeon: 384M of VRAM memory ready
[   10.964505] [drm] radeon: 1024M of GTT memory ready.
[   10.964561] [drm] Loading PALM Microcode
[   11.342995] cfg80211: Calling CRDA to update world regulatory domain
[   11.450482] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin
[   11.462326] asus_wmi: ASUS WMI generic driver loaded
[   11.481965] asus_wmi: Initialization: 0x1
[   11.482115] asus_wmi: BIOS WMI version: 0.0
[   11.482293] asus_wmi: SFUN value: 0x4a0077
[   11.486616] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input21
[   11.547680] asus_wmi: Disabling ACPI video driver
[   11.561522] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin
[   11.650701] kvm: Nested Virtualization enabled
[   11.650718] kvm: Nested Paging enabled
[   11.689540] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin
[   11.689573] [drm] Internal thermal controller without fan control
[   11.689774] == power state 0 ==
[   11.689781] ui class: none
[   11.689788] internal class: uvd_hd
[   11.689794] caps:
[   11.689801] uvd    vclk: 38824 dclk: 30000
[   11.689808] power level 0    sclk: 27500 vddc: 863
[   11.689811] status:
[   11.689816] == power state 1 ==
[   11.689820] ui class: none
[   11.689824] internal class: uvd
[   11.689829] caps:
[   11.689835] uvd    vclk: 55000 dclk: 41250
[   11.689840] power level 0    sclk: 50770 vddc: 913
[   11.689843] status:
[   11.689848] == power state 2 ==
[   11.689851] ui class: battery
[   11.689855] internal class: none
[   11.689860] caps:
[   11.689865] uvd    vclk: 0 dclk: 0
[   11.689870] power level 0    sclk: 27500 vddc: 863
[   11.689874] status:
[   11.689878] == power state 3 ==
[   11.689881] ui class: performance
[   11.689885] internal class: none
[   11.689891] caps:
[   11.689896] uvd    vclk: 0 dclk: 0
[   11.689901] power level 0    sclk: 27500 vddc: 863
[   11.689906] power level 1    sclk: 50770 vddc: 913
[   11.689909] status:
[   11.689913] == power state 4 ==
[   11.689917] ui class: none
[   11.689921] internal class: boot
[   11.689926] caps:
[   11.689931] uvd    vclk: 0 dclk: 0
[   11.689936] power level 0    sclk: 20000 vddc: 938
[   11.689939] status: c r b
[   11.689947] == power state 5 ==
[   11.689950] ui class: none
[   11.689954] internal class: thermal
[   11.689960] caps:
[   11.689965] uvd    vclk: 0 dclk: 0
[   11.689970] power level 0    sclk: 17369 vddc: 863
[   11.689973] status:
[   11.689981] [drm] Found smc ucode version: 0x00010601
[   11.690125] [drm] radeon: dpm initialized
[   11.807322] media: Linux media interface: v0.10
[   11.842735] Linux video capture interface: v2.00
[   11.888689] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
[   11.888781] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   11.900665] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[   11.900906] radeon 0000:00:01.0: WB enabled
[   11.900915] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff8800b13ecc00
[   11.900920] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff8800b13ecc0c
[   11.901701] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900108b2118
[   11.901707] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   11.901709] [drm] Driver supports precise vblank timestamp query.
[   11.901713] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[   11.901748] radeon 0000:00:01.0: irq 47 for MSI/MSI-X
[   11.901773] radeon 0000:00:01.0: radeon: using MSI.
[   11.901815] [drm] radeon: irq initialized.
[   11.919082] [drm] ring test on 0 succeeded in 1 usecs
[   11.919098] [drm] ring test on 3 succeeded in 3 usecs
[   11.974880] [drm] ring test on 5 succeeded in 1 usecs
[   11.994840] [drm] UVD initialized successfully.
[   11.995659] [drm] ib test on ring 0 succeeded in 0 usecs
[   11.995705] [drm] ib test on ring 3 succeeded in 0 usecs
[   12.016536] [drm] ib test on ring 5 succeeded
[   12.096742] [drm] radeon atom DIG backlight initialized
[   12.096765] [drm] Radeon Display Connectors
[   12.096772] [drm] Connector 0:
[   12.096778] [drm]   LVDS-1
[   12.096783] [drm]   HPD1
[   12.096792] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   12.096795] [drm]   Encoders:
[   12.096800] [drm]     LCD1: INTERNAL_UNIPHY
[   12.096805] [drm] Connector 1:
[   12.096809] [drm]   HDMI-A-1
[   12.096813] [drm]   HPD2
[   12.096820] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   12.096824] [drm]   Encoders:
[   12.096828] [drm]     DFP1: INTERNAL_UNIPHY
[   12.096832] [drm] Connector 2:
[   12.096836] [drm]   VGA-1
[   12.096843] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[   12.096847] [drm]   Encoders:
[   12.096851] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   12.385559] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0013 detected
[   12.393558] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[   12.409656] switching from power state:
[   12.409673] ui class: none
[   12.409680] internal class: boot
[   12.409686] caps:
[   12.409693] uvd    vclk: 0 dclk: 0
[   12.409701] power level 0    sclk: 20000 vddc: 938
[   12.409705] status: c b
[   12.409712] switching to power state:
[   12.409716] ui class: none
[   12.409720] internal class: thermal
[   12.409725] caps:
[   12.409731] uvd    vclk: 0 dclk: 0
[   12.409737] power level 0    sclk: 17369 vddc: 863
[   12.409740] status: r
[   12.517890] uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (1bcf:2883)
[   12.527034] [drm] fb mappable at 0xD0477000
[   12.527047] [drm] vram apper at 0xD0000000
[   12.527052] [drm] size 4325376
[   12.527057] [drm] fb depth is 24
[   12.527062] [drm]    pitch is 5632
[   12.527511] fbcon: radeondrmfb (fb0) is primary device
[   12.536173] input: ASUS USB2.0 Webcam as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/input/input22
[   12.536919] usbcore: registered new interface driver uvcvideo
[   12.536921] USB Video Class driver (1.1.1)
[   12.725611] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.106414] Console: switching to colour frame buffer device 170x48
[   13.119310] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[   13.119316] radeon 0000:00:01.0: registered panic notifier
[   13.127002] [drm] Initialized radeon 2.39.0 20080528 for 0000:00:01.0 on minor 0
[   13.577606] Adding 4295676k swap on /dev/sda5.  Priority:-1 extents:1 across:4295676k FS
[   13.809856] cfg80211: World regulatory domain updated:
[   13.809873] cfg80211:  DFS Master region: unset
[   13.809879] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   13.809890] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   13.809898] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   13.809905] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   13.809914] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   13.809923] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   13.809931] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   13.809938] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   13.809945] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   15.271233] RPC: Registered named UNIX socket transport module.
[   15.271247] RPC: Registered udp transport module.
[   15.271253] RPC: Registered tcp transport module.
[   15.271258] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   15.304118] FS-Cache: Loaded
[   15.393224] FS-Cache: Netfs 'nfs' registered for caching
[   15.455654] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   23.432541] alx 0000:02:00.0: irq 48 for MSI/MSI-X
[   23.432871] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.433665] alx 0000:02:00.0 eth0: NIC Up: 100 Mbps Full
[   23.433895] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   23.440558] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[   23.501506] rt2800pci 0000:01:00.0: firmware: direct-loading firmware rt3290.bin
[   23.501539] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[   23.625881] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   84.680552] wlan0: authenticate with 90:67:1c:25:24:cb
[   84.695837] wlan0: send auth to 90:67:1c:25:24:cb (try 1/3)
[   84.697354] wlan0: authenticated
[   84.699936] wlan0: associate with 90:67:1c:25:24:cb (try 1/3)
[   84.703963] wlan0: RX AssocResp from 90:67:1c:25:24:cb (capab=0x411 status=0 aid=2)
[   84.704074] wlan0: associated
[   84.704147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   84.711043] wlan0: disassociated from 90:67:1c:25:24:cb (Reason: 14)
[   84.727912] cfg80211: Calling CRDA to update world regulatory domain
[   84.748331] cfg80211: World regulatory domain updated:
[   84.748343] cfg80211:  DFS Master region: unset
[   84.748347] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   84.748352] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   84.748356] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   84.748360] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   84.748365] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   84.748370] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   84.748374] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   84.748378] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   84.748381] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   94.157336] wlan0: authenticate with 90:67:1c:25:24:cb
[   94.171748] wlan0: send auth to 90:67:1c:25:24:cb (try 1/3)
[   94.174661] wlan0: authenticated
[   94.175667] wlan0: associate with 90:67:1c:25:24:cb (try 1/3)
[   94.179788] wlan0: RX AssocResp from 90:67:1c:25:24:cb (capab=0x411 status=0 aid=2)
[   94.179909] wlan0: associated
[  758.913514] i2c /dev entries driver



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 29 Aralık 2015 - 00:05:42
hocam şuan sıcaklık 74 derece çok fazla

Kod Seç Genişlet

Thermal 0: ok, 74.0 degrees C


[if]

@hazar27, şu an için bir şey bulamadım. fglrx sürücüsünü kurup duruma bakmakta fayda var yalnız.

[hazar27]

Tmm hocam ben şimdiki paketi kaldirim flgrx kururyorum


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 29 Aralık 2015 - 00:41:51
Hocam o flgrx paketini tanıtınca daha çok sorun çıktı  hocam ubuntudada böyle sorunlar yaşatıyomu bu ekran kartı

[heartsmagic]

Ubuntu'da işler bir nebze daha kolaydır. Kart sorunlu mudur değil midir doğrudan bir şey söylemek biraz güç. Eğer vaktin varsa USB üzerinden çalıştırarak görmen mümkün.

[hazar27]

Hocam şuan ubuntu kurulu kartın sorunlu okup olmadına bakabilirmisiniz çünkü halen fan hızlı dönüyo ve 74 derece gösteriyo sıcaklığı

[heartsmagic]

Şu an bir şey kurmadıysan açık kaynak sürücüler kuruludur zaten.
Yazılım ve Güncelleştirmeler uygulamasını açıp Ek Sürücüler sekmesinden sahipli sürücüyü kurup sistemi yeniden başlat. Sorun düzelmezse yine bakmaya çalışırız, fakat ben forumda olmayacağım şu saatten sonra. Sen işlemleri yaptıktan sonra ilk iletilerdeki gibi ilgili çıktıları buraya geçersin.

[hazar27]

Şu an bir şey kurmadıysan açık kaynak sürücüler kuruludur zaten.
Yazılım ve Güncelleştirmeler uygulamasını açıp Ek Sürücüler sekmesinden sahipli sürücüyü kurup sistemi yeniden başlat. Sorun düzelmezse yine bakmaya çalışırız, fakat ben forumda olmayacağım şu saatten sonra. Sen işlemleri yaptıktan sonra ilk iletilerdeki gibi ilgili çıktıları buraya geçersin.

Tmm Hocam Saollun


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 30 Aralık 2015 - 22:16:36
Hocam sahipli olan ekran kartı driveri yükledim

Kod Seç Genişlet

lspci | egrep "VGA|3D|Display"
Çıktısı :

Kod Seç Genişlet

00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6320]


Kod Seç Genişlet

glxinfo | grep render
Çıktısı :

Kod Seç Genişlet

direct rendering: Yes
OpenGL renderer string: AMD Radeon HD 6320 Graphics
    GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
    GL_KTX_buffer_region, GL_NV_blend_square, GL_NV_conditional_render,
    GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
    GL_KTX_buffer_region, GL_NV_blend_square, GL_NV_conditional_render,


Kod Seç Genişlet

xrandr
Çıktısı :

Kod Seç Genişlet

Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
LVDS connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
   1366x768      60.00*+
   1360x768      60.00 
   1280x768      60.00 
   1280x720      60.00 
   1024x768      60.00 
   1024x600      60.00 
   800x600       60.00 
   800x480       60.00 
   640x480       60.00 
DFP1 disconnected (normal left inverted right x axis y axis)
CRT1 disconnected (normal left inverted right x axis y axis)


Kod Seç Genişlet

dpkg -l | egrep "nvidia|bumblebee|nvidia-prime|fglrx"
Çıktısı :

Kod Seç Genişlet

ii  fglrx-amdcccle-updates                        2:15.201-0ubuntu2~15.10.2                  amd64        Catalyst Control Center for the AMD graphics accelerators
ii  fglrx-updates                                 2:15.201-0ubuntu2~15.10.2                  amd64        Video driver for the AMD graphics accelerators
ii  fglrx-updates-core                            2:15.201-0ubuntu2~15.10.2                  amd64        Minimal video driver for the AMD graphics accelerators

Kod Seç Genişlet

lspci
Çıktısı :

Kod Seç Genişlet

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6320]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Port
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Port
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
01:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
01:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth
02:00.0 Ethernet controller: Qualcomm Atheros AR8161 Gigabit Ethernet (rev 10)


Kod Seç Genişlet

sensors
Çıktısı :

Kod Seç Genişlet

acpitz-virtual-0
Adapter: Virtual device
temp1:        +61.0°C  (crit = +103.0°C)

k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +61.4°C  (high = +70.0°C)
                       (crit = +100.0°C, hyst = +97.0°C)

asus-isa-0000
Adapter: ISA adapter
cpu_fan:     3500 RPM
temp1:        +61.0°C 

Kod Seç Genişlet

acpi -t
Çıktısı :

Kod Seç Genişlet

Thermal 0: ok, 63.0 degrees C


Kod Seç Genişlet

dmesg
Çıktısı :

Kod Seç Genişlet

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.0-16-generic (buildd@lcy01-07) (gcc version 5.2.1 20151003 (Ubuntu 5.2.1-21ubuntu2) ) #19-Ubuntu SMP Thu Oct 8 15:35:06 UTC 2015 (Ubuntu 4.2.0-16.19-generic 4.2.3)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.2.0-16-generic root=UUID=f4c16b5a-e315-4771-a235-f579d77de4ff ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] tseg: 00b7400000
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b6563fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b6564000-0x00000000b66e7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b66e8000-0x00000000b67c6fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b67c7000-0x00000000b6cd8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b6cd9000-0x00000000b6cd9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b6cda000-0x00000000b6ce0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b6ce1000-0x00000000b70f1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b70f2000-0x00000000b73f2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b73f3000-0x00000000b73fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000012effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. X55U/X55U, BIOS X55U.423 08/06/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x12f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-CEFFF write-protect
[    0.000000]   CF000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0B7400000 mask FFFC00000 uncachable
[    0.000000]   3 base 0B7800000 mask FFF800000 uncachable
[    0.000000]   4 base 0B8000000 mask FF8000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000012f000000 aka 4848M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 2932MB, range: 4MB, type UC
[    0.000000] reg 3, base: 2936MB, range: 8MB, type UC
[    0.000000] reg 4, base: 2944MB, range: 128MB, type UC
[    0.000000] total RAM covered: 2932M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 256M num_reg: 5  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 2932MB, range: 4MB, type UC
[    0.000000] reg 3, base: 2936MB, range: 8MB, type UC
[    0.000000] reg 4, base: 2944MB, range: 128MB, type UC
[    0.000000] e820: update [mem 0xb7400000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xb7400 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd6e0-0x000fd6ef] mapped at [ffff8800000fd6e0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01ff0000, 0x01ff0fff] PGTABLE
[    0.000000] BRK [0x01ff1000, 0x01ff1fff] PGTABLE
[    0.000000] BRK [0x01ff2000, 0x01ff2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x12ee00000-0x12effffff]
[    0.000000]  [mem 0x12ee00000-0x12effffff] page 2M
[    0.000000] BRK [0x01ff3000, 0x01ff3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x120000000-0x12edfffff]
[    0.000000]  [mem 0x120000000-0x12edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100001000-0x11fffffff]
[    0.000000]  [mem 0x100001000-0x1001fffff] page 4k
[    0.000000]  [mem 0x100200000-0x11fffffff] page 2M
[    0.000000] BRK [0x01ff4000, 0x01ff4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0xb6563fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xb63fffff] page 2M
[    0.000000]  [mem 0xb6400000-0xb6563fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xb6cd9000-0xb6cd9fff]
[    0.000000]  [mem 0xb6cd9000-0xb6cd9fff] page 4k
[    0.000000] BRK [0x01ff5000, 0x01ff5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xb6ce1000-0xb70f1fff]
[    0.000000]  [mem 0xb6ce1000-0xb6dfffff] page 4k
[    0.000000]  [mem 0xb6e00000-0xb6ffffff] page 2M
[    0.000000]  [mem 0xb7000000-0xb70f1fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xb73f3000-0xb73fffff]
[    0.000000]  [mem 0xb73f3000-0xb73fffff] page 4k
[    0.000000] RAMDISK: [mem 0x347a2000-0x363c8fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0x00000000B67A3070 000064 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000B67B1260 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150619/tbfadt-654)
[    0.000000] ACPI: DSDT 0x00000000B67A3170 00E0E9 (v02 _ASUS_ Notebook 00000000 INTL 20091112)
[    0.000000] ACPI: FACS 0x00000000B67BC080 000040
[    0.000000] ACPI: APIC 0x00000000B67B1370 000062 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000B67B13D8 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: ECDT 0x00000000B67B1420 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: MCFG 0x00000000B67B14E8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000B67B1528 000038 (v01 _ASUS_ Notebook 01072009 AMI  00000005)
[    0.000000] ACPI: SSDT 0x00000000B67B1560 0003DE (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000B67B1940 0016E4 (v02 AMD    ALIB     00000001 MSFT 04000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x12eff7000-0x12effbfff]
[    0.000000]  [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012ac00000-ffff88012e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000012effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000b6563fff]
[    0.000000]   node   0: [mem 0x00000000b6cd9000-0x00000000b6cd9fff]
[    0.000000]   node   0: [mem 0x00000000b6ce1000-0x00000000b70f1fff]
[    0.000000]   node   0: [mem 0x00000000b73f3000-0x00000000b73fffff]
[    0.000000]   node   0: [mem 0x0000000100001000-0x000000012effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012effffff]
[    0.000000] On node 0 totalpages: 940319
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11623 pages used for memmap
[    0.000000]   DMA32 zone: 743811 pages, LIFO batch:31
[    0.000000]   Normal zone: 3008 pages used for memmap
[    0.000000]   Normal zone: 192511 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb6564000-0xb66e7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb66e8000-0xb67c6fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb67c7000-0xb6cd8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb6cda000-0xb6ce0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb70f2000-0xb73f2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7400000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[    0.000000] e820: [mem 0xb7400000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88012ec00000 s96728 r8192 d30248 u1048576
[    0.000000] pcpu-alloc: s96728 r8192 d30248 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 925603
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0-16-generic root=UUID=f4c16b5a-e315-4771-a235-f579d77de4ff ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3590024K/3761276K available (8146K kernel code, 1237K rwdata, 3800K rodata, 1460K init, 1292K bss, 171252K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] Build-time adjustment of leaf fanout to 64.
[    0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:16640 nr_irqs:440 16
[    0.000000] Offload RCU callbacks from all CPUs
[    0.000000] Offload RCU callbacks from CPUs: 0-1.
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1646.922 MHz processor
[    0.000070] Calibrating delay loop (skipped), value calculated using timer frequency.. 3293.84 BogoMIPS (lpj=6587688)
[    0.000079] pid_max: default: 32768 minimum: 301
[    0.000099] ACPI: Core revision 20150619
[    0.030705] ACPI: All ACPI Tables successfully acquired
[    0.030772] Security Framework initialized
[    0.030797] AppArmor: AppArmor initialized
[    0.030800] Yama: becoming mindful.
[    0.031601] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.034204] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.035386] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.035405] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.035944] Initializing cgroup subsys blkio
[    0.035958] Initializing cgroup subsys memory
[    0.035981] Initializing cgroup subsys devices
[    0.035988] Initializing cgroup subsys freezer
[    0.035996] Initializing cgroup subsys net_cls
[    0.036003] Initializing cgroup subsys perf_event
[    0.036009] Initializing cgroup subsys net_prio
[    0.036016] Initializing cgroup subsys hugetlb
[    0.036067] CPU: Physical Processor ID: 0
[    0.036071] CPU: Processor Core ID: 0
[    0.036074] mce: CPU supports 6 MCE banks
[    0.036093] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.036096] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.036372] Freeing SMP alternatives memory: 28K (ffffffff81ea4000 - ffffffff81eab000)
[    0.042268] ftrace: allocating 30905 entries in 121 pages
[    0.079605] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.223672] smpboot: CPU0: AMD E-450 APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
[    0.223724] Performance Events: AMD PMU driver.
[    0.223734] ... version:                0
[    0.223737] ... bit width:              48
[    0.223740] ... generic registers:      4
[    0.223742] ... value mask:             0000ffffffffffff
[    0.223745] ... max period:             00007fffffffffff
[    0.223747] ... fixed-purpose events:   0
[    0.223749] ... event mask:             000000000000000f
[    0.225355] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.225675] x86: Booting SMP configuration:
[    0.225681] .... node  #0, CPUs:      #1
[    0.228877] x86: Booted up 1 node, 2 CPUs
[    0.228883] smpboot: Total of 2 processors activated (6587.68 BogoMIPS)
[    0.229757] devtmpfs: initialized
[    0.237476] evm: security.selinux
[    0.237480] evm: security.SMACK64
[    0.237483] evm: security.SMACK64EXEC
[    0.237485] evm: security.SMACK64TRANSMUTE
[    0.237488] evm: security.SMACK64MMAP
[    0.237490] evm: security.ima
[    0.237492] evm: security.capability
[    0.237738] PM: Registering ACPI NVS region [mem 0xb66e8000-0xb67c6fff] (913408 bytes)
[    0.237785] PM: Registering ACPI NVS region [mem 0xb6cda000-0xb6ce0fff] (28672 bytes)
[    0.237986] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.238224] pinctrl core: initialized pinctrl subsystem
[    0.238542] RTC time: 20:05:21, date: 12/30/15
[    0.238849] NET: Registered protocol family 16
[    0.243862] cpuidle: using governor ladder
[    0.252044] cpuidle: using governor menu
[    0.252372] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.252378] ACPI: bus type PCI registered
[    0.252383] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.252579] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.252586] PCI: not using MMCONFIG
[    0.252589] PCI: Using configuration type 1 for base access
[    0.252591] PCI: Using configuration type 1 for extended access
[    0.261650] ACPI: Added _OSI(Module Device)
[    0.261658] ACPI: Added _OSI(Processor Device)
[    0.261662] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.261665] ACPI: Added _OSI(Processor Aggregator Device)
[    0.264435] ACPI : EC: EC description table is found, configuring boot EC
[    0.264457] ACPI : EC: EC started
[    0.267310] ACPI: Executed 1 blocks of module-level executable AML code
[    0.271830] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.284800] ACPI: Interpreter enabled
[    0.284824] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[    0.284837] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[    0.284875] ACPI: (supports S0 S3 S4 S5)
[    0.284880] ACPI: Using IOAPIC for interrupt routing
[    0.285231] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.285347] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.285421] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.299943] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.304402] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.304421] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.305076] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.305082] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.305847] PCI host bridge to bus 0000:00
[    0.305856] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.305862] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.305867] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.305872] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.305876] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.305882] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.305886] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.305891] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window]
[    0.305907] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[    0.306152] pci 0000:00:01.0: [1002:9806] type 00 class 0x030000
[    0.306184] pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[    0.306195] pci 0000:00:01.0: reg 0x14: [io  0xf000-0xf0ff]
[    0.306207] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
[    0.306265] pci 0000:00:01.0: supports D1 D2
[    0.306450] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[    0.306479] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
[    0.306549] pci 0000:00:01.1: supports D1 D2
[    0.306726] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
[    0.306806] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.307009] pci 0000:00:05.0: [1022:1513] type 01 class 0x060400
[    0.307090] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.307359] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
[    0.307417] pci 0000:00:10.0: reg 0x10: [mem 0xfeb48000-0xfeb49fff 64bit]
[    0.307528] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.307641] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.307783] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[    0.307824] pci 0000:00:11.0: reg 0x10: [io  0xf140-0xf147]
[    0.307839] pci 0000:00:11.0: reg 0x14: [io  0xf130-0xf133]
[    0.307854] pci 0000:00:11.0: reg 0x18: [io  0xf120-0xf127]
[    0.307869] pci 0000:00:11.0: reg 0x1c: [io  0xf110-0xf113]
[    0.307884] pci 0000:00:11.0: reg 0x20: [io  0xf100-0xf10f]
[    0.307900] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4d000-0xfeb4d7ff]
[    0.308136] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[    0.308162] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4c000-0xfeb4cfff]
[    0.308342] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.308461] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[    0.308500] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4b000-0xfeb4b0ff]
[    0.308598] pci 0000:00:12.2: supports D1 D2
[    0.308602] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.308705] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.308813] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.309090] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.309131] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
[    0.309216] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.309321] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.309434] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.309702] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[    0.309921] pci 0000:00:14.7: [1022:7806] type 00 class 0x080501
[    0.309953] pci 0000:00:14.7: reg 0x10: [mem 0xfeb4a000-0xfeb4a0ff 64bit]
[    0.310199] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[    0.310404] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[    0.310606] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[    0.310805] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[    0.311014] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[    0.311213] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[    0.311411] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[    0.311610] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[    0.313588] pci 0000:01:00.0: [1814:3290] type 00 class 0x028000
[    0.313659] pci 0000:01:00.0: reg 0x10: [mem 0xfea10000-0xfea1ffff]
[    0.313826] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.315626] pci 0000:01:00.1: [1814:3298] type 00 class 0x0d1100
[    0.315696] pci 0000:01:00.1: reg 0x10: [mem 0xfea00000-0xfea0ffff]
[    0.317489] pci 0000:01:00.1: supports D1
[    0.317495] pci 0000:01:00.1: PME# supported from D0 D1 D3hot D3cold
[    0.329614] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.329634] pci 0000:00:04.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.329900] pci 0000:02:00.0: [1969:1091] type 00 class 0x020000
[    0.329960] pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe93ffff 64bit]
[    0.329977] pci 0000:02:00.0: reg 0x18: [io  0xe000-0xe07f]
[    0.330153] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.330213] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.336013] pci 0000:00:05.0: PCI bridge to [bus 02]
[    0.336029] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.336036] pci 0000:00:05.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.336248] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[    0.336266] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.336271] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.336276] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.336280] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.336285] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.336290] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.336294] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode)
[    0.337709] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[    0.337882] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[    0.338058] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[    0.338231] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[    0.338382] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[    0.338501] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[    0.338619] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[    0.338736] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[    0.339384] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.339545] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    0.340040] vgaarb: setting as boot device: PCI:0000:00:01.0
[    0.340048] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.340063] vgaarb: loaded
[    0.340066] vgaarb: bridge control possible 0000:00:01.0
[    0.340794] SCSI subsystem initialized
[    0.340951] libata version 3.00 loaded.
[    0.341026] ACPI: bus type USB registered
[    0.341076] usbcore: registered new interface driver usbfs
[    0.341102] usbcore: registered new interface driver hub
[    0.341140] usbcore: registered new device driver usb
[    0.341695] PCI: Using ACPI for IRQ routing
[    0.352640] PCI: pci_cache_line_size set to 64 bytes
[    0.352835] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.352840] e820: reserve RAM buffer [mem 0xb6564000-0xb7ffffff]
[    0.352844] e820: reserve RAM buffer [mem 0xb6cda000-0xb7ffffff]
[    0.352847] e820: reserve RAM buffer [mem 0xb70f2000-0xb7ffffff]
[    0.352850] e820: reserve RAM buffer [mem 0xb7400000-0xb7ffffff]
[    0.352854] e820: reserve RAM buffer [mem 0x12f000000-0x12fffffff]
[    0.353165] NetLabel: Initializing
[    0.353169] NetLabel:  domain hash size = 128
[    0.353171] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.353201] NetLabel:  unlabeled traffic allowed by default
[    0.353575] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.353588] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.355696] clocksource: Switched to clocksource hpet
[    0.372537] AppArmor: AppArmor Filesystem Enabled
[    0.372711] pnp: PnP ACPI init
[    0.373042] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.373056] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.373729] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.373736] system 00:01: [io  0x040b] has been reserved
[    0.373741] system 00:01: [io  0x04d6] has been reserved
[    0.373746] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.373751] system 00:01: [io  0x0c14] has been reserved
[    0.373757] system 00:01: [io  0x0c50-0x0c51] has been reserved
[    0.373761] system 00:01: [io  0x0c52] has been reserved
[    0.373766] system 00:01: [io  0x0c6c] has been reserved
[    0.373771] system 00:01: [io  0x0c6f] has been reserved
[    0.373776] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.373781] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.373786] system 00:01: [io  0x0cd4-0x0cd5] has been reserved
[    0.373791] system 00:01: [io  0x0cd6-0x0cd7] has been reserved
[    0.373795] system 00:01: [io  0x0cd8-0x0cdf] has been reserved
[    0.373801] system 00:01: [io  0x0800-0x089f] could not be reserved
[    0.373806] system 00:01: [io  0x0900-0x090f] has been reserved
[    0.373810] system 00:01: [io  0x0910-0x091f] has been reserved
[    0.373816] system 00:01: [io  0xfe00-0xfefe] has been reserved
[    0.373822] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.373828] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.373833] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.373839] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.373844] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.373849] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[    0.373855] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[    0.373864] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.373954] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.374107] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.374116] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.374232] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.374342] system 00:05: [io  0x0240-0x0259] has been reserved
[    0.374351] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.374533] pnp 00:06: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.374649] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    0.374994] system 00:08: [mem 0xb8000000-0xcfffffff] has been reserved
[    0.375003] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.375565] pnp: PnP ACPI: found 9 devices
[    0.388376] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.388440] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.388451] pci 0000:00:04.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.388462] pci 0000:00:05.0: PCI bridge to [bus 02]
[    0.388468] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.388475] pci 0000:00:05.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.388484] pci 0000:00:14.4: PCI bridge to [bus 03]
[    0.388505] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.388510] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.388515] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.388520] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.388524] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.388529] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.388533] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff window]
[    0.388538] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.388543] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.388547] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.388552] pci_bus 0000:03: resource 4 [io  0x0000-0x03af window]
[    0.388557] pci_bus 0000:03: resource 5 [io  0x03e0-0x0cf7 window]
[    0.388561] pci_bus 0000:03: resource 6 [io  0x03b0-0x03df window]
[    0.388566] pci_bus 0000:03: resource 7 [io  0x0d00-0xffff window]
[    0.388570] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.388574] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.388579] pci_bus 0000:03: resource 10 [mem 0xd0000000-0xffffffff window]
[    0.388651] NET: Registered protocol family 2
[    0.389016] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.389226] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.389485] TCP: Hash tables configured (established 32768 bind 32768)
[    0.389604] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.389660] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.389849] NET: Registered protocol family 1
[    0.389892] pci 0000:00:01.0: Video device with shadowed ROM
[    0.476600] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[    0.476661] PCI: CLS 64 bytes, default 64
[    0.476819] Trying to unpack rootfs image as initramfs...
[    1.450942] Freeing initrd memory: 28828K (ffff8800347a2000 - ffff8800363c9000)
[    1.450998] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.451004] software IO TLB [mem 0xb2564000-0xb6564000] (64MB) mapped at [ffff8800b2564000-ffff8800b6563fff]
[    1.451353] microcode: CPU0: patch_level=0x0500010d
[    1.451371] microcode: CPU1: patch_level=0x0500010d
[    1.451687] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.451707] LVT offset 0 assigned for vector 0x400
[    1.451784] perf: AMD IBS detected (0x000000ff)
[    1.452358] Scanning for low memory corruption every 60 seconds
[    1.453263] futex hash table entries: 512 (order: 3, 32768 bytes)
[    1.453295] Initialise system trusted keyring
[    1.453349] audit: initializing netlink subsys (disabled)
[    1.453393] audit: type=2000 audit(1451505922.332:1): initialized
[    1.454385] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    1.454393] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.459013] zpool: loaded
[    1.459021] zbud: loaded
[    1.459722] VFS: Disk quotas dquot_6.6.0
[    1.459845] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.461765] fuse init (API version 7.23)
[    1.462255] Key type big_key registered
[    1.463292] Key type asymmetric registered
[    1.463305] Asymmetric key parser 'x509' registered
[    1.463365] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.463478] io scheduler noop registered
[    1.463487] io scheduler deadline registered (default)
[    1.463595] io scheduler cfq registered
[    1.464601] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[    1.464608] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.464613] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[    1.464621] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[    1.464660] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[    1.464666] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.464673] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[    1.464691] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.464717] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.464806] vesafb: mode is 1366x768x32, linelength=5632, pages=0
[    1.464809] vesafb: scrolling: redraw
[    1.464813] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.464844] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000800000, using 4224k, total 4224k
[    1.465167] Console: switching to colour frame buffer device 170x48
[    1.465216] fb0: VESA VGA frame buffer device
[    1.465568] ACPI: AC Adapter [AC0] (on-line)
[    1.465740] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.465750] ACPI: Power Button [PWRB]
[    1.465862] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.488689] ACPI: Lid Switch [LID]
[    1.488858] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.488867] ACPI: Sleep Button [SLPB]
[    1.488976] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.488983] ACPI: Power Button [PWRF]
[    1.489262] ACPI: acpi_idle registered with cpuidle
[    1.491557] thermal LNXTHERM:00: registered as thermal_zone0
[    1.491565] ACPI: Thermal Zone [THRM] (74 C)
[    1.491670] GHES: HEST is not enabled!
[    1.491964] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.500463] Linux agpgart interface v0.103
[    1.509611] brd: module loaded
[    1.512903] loop: module loaded
[    1.513502] libphy: Fixed MDIO Bus: probed
[    1.513510] tun: Universal TUN/TAP device driver, 1.6
[    1.513513] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.513688] PPP generic driver version 2.4.2
[    1.514147] QUIRK: Enable AMD PLL fix
[    1.514184] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.514200] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[    1.514424] xhci_hcd 0000:00:10.0: hcc params 0x014042c3 hci version 0x96 quirks 0x00000608
[    1.514699] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.514705] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.514709] usb usb1: Product: xHCI Host Controller
[    1.514713] usb usb1: Manufacturer: Linux 4.2.0-16-generic xhci-hcd
[    1.514717] usb usb1: SerialNumber: 0000:00:10.0
[    1.515197] hub 1-0:1.0: USB hub found
[    1.515242] hub 1-0:1.0: 2 ports detected
[    1.515575] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.515590] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    1.517840] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.517907] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.517913] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.517917] usb usb2: Product: xHCI Host Controller
[    1.517921] usb usb2: Manufacturer: Linux 4.2.0-16-generic xhci-hcd
[    1.517925] usb usb2: SerialNumber: 0000:00:10.0
[    1.518456] hub 2-0:1.0: USB hub found
[    1.518500] hub 2-0:1.0: 2 ports detected
[    1.518871] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.518892] ehci-pci: EHCI PCI platform driver
[    1.519170] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.519186] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
[    1.519196] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.519211] ehci-pci 0000:00:12.2: debug port 1
[    1.519284] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4b000
[    1.528459] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.528634] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.528640] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.528645] usb usb3: Product: EHCI Host Controller
[    1.528649] usb usb3: Manufacturer: Linux 4.2.0-16-generic ehci_hcd
[    1.528653] usb usb3: SerialNumber: 0000:00:12.2
[    1.529498] hub 3-0:1.0: USB hub found
[    1.529525] hub 3-0:1.0: 5 ports detected
[    1.531501] ehci-platform: EHCI generic platform driver
[    1.531544] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.531564] ohci-pci: OHCI PCI platform driver
[    1.531809] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.531825] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[    1.531892] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4c000
[    1.588617] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.588626] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.588631] usb usb4: Product: OHCI PCI host controller
[    1.588635] usb usb4: Manufacturer: Linux 4.2.0-16-generic ohci_hcd
[    1.588639] usb usb4: SerialNumber: 0000:00:12.0
[    1.589185] hub 4-0:1.0: USB hub found
[    1.589229] hub 4-0:1.0: 5 ports detected
[    1.591157] ohci-platform: OHCI generic platform driver
[    1.591194] uhci_hcd: USB Universal Host Controller Interface driver
[    1.591366] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.593306] i8042: Detected active multiplexing controller, rev 1.1
[    1.594292] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.594305] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.594399] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.594485] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.594570] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.595324] mousedev: PS/2 mouse device common for all mice
[    1.596631] rtc_cmos 00:02: RTC can wake from S4
[    1.596853] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.596898] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.596924] i2c /dev entries driver
[    1.597155] device-mapper: uevent: version 1.0.3
[    1.597424] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[    1.597472] ledtrig-cpu: registered to indicate activity on CPUs
[    1.597818] PCCT header not found.
[    1.598385] NET: Registered protocol family 10
[    1.598833] NET: Registered protocol family 17
[    1.598861] Key type dns_resolver registered
[    1.599982] Loading compiled-in X.509 certificates
[    1.602866] Loaded X.509 cert 'Build time autogenerated kernel key: 6a1c9c21f04ab86fd1d7ced6ca113540fc8e35b6'
[    1.602904] registered taskstats version 1
[    1.602941] zswap: loading zswap
[    1.602947] zswap: using zbud pool
[    1.602963] zswap: using lzo compressor
[    1.609742] Key type trusted registered
[    1.622160] Key type encrypted registered
[    1.622198] AppArmor: AppArmor sha1 policy hashing enabled
[    1.622208] ima: No TPM chip found, activating TPM-bypass!
[    1.622277] evm: HMAC attrs: 0x1
[    1.622929]   Magic number: 11:926:94
[    1.623124] rtc_cmos 00:02: setting system clock to 2015-12-30 20:05:22 UTC (1451505922)
[    1.623380] acpi-cpufreq: overriding BIOS provided _PSD data
[    1.623549] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.623553] EDD information not available.
[    1.623751] PM: Hibernation image not present or could not be loaded.
[    1.633690] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.637702] ACPI: Battery Slot [BAT0] (battery present)
[    1.638796] Freeing unused kernel memory: 1460K (ffffffff81d37000 - ffffffff81ea4000)
[    1.638805] Write protecting the kernel read-only data: 12288k
[    1.639275] Freeing unused kernel memory: 36K (ffff8800017f7000 - ffff880001800000)
[    1.639536] Freeing unused kernel memory: 296K (ffff880001bb6000 - ffff880001c00000)
[    1.678322] random: systemd-udevd urandom read with 6 bits of entropy available
[    1.813485] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.825099] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.839417] acpi device:4f: registered as cooling_device2
[    1.839631] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    1.850630] wmi: Mapper loaded
[    1.870684] ahci 0000:00:11.0: version 3.0
[    1.871242] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.871251] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    1.882107] scsi host0: ahci
[    1.885040] sdhci: Secure Digital Host Controller Interface driver
[    1.885047] sdhci: Copyright(c) Pierre Ossman
[    1.888543] scsi host1: ahci
[    1.888757] ata1: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d100 irq 29
[    1.888764] ata2: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d180 irq 29
[    1.889643] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7806] (rev 0)
[    1.889935] sdhci-pci 0000:00:14.7: No vmmc regulator found
[    1.889941] sdhci-pci 0000:00:14.7: No vqmmc regulator found
[    1.890510] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [10:bf:48:66:fe:95]
[    1.892021] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit
[    2.005301] alx 0000:02:00.0 enp2s0: renamed from eth0
[    2.104703] usb 3-2: new high-speed USB device number 3 using ehci-pci
[    2.108695] usb 4-1: new full-speed USB device number 2 using ohci-pci
[    2.275766] usb 4-1: New USB device found, idVendor=248a, idProduct=8366
[    2.275782] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.275791] usb 4-1: Product: Wireless Receiver
[    2.275800] usb 4-1: Manufacturer: Telink
[    2.287910] hidraw: raw HID events driver (C) Jiri Kosina
[    2.298539] usbcore: registered new interface driver usbhid
[    2.298547] usbhid: USB HID core driver
[    2.303599] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/0003:248A:8366.0001/input/input14
[    2.344441] usb 3-2: New USB device found, idVendor=1bcf, idProduct=2883
[    2.344457] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.344466] usb 3-2: Product: ASUS USB2.0 Webcam
[    2.344475] usb 3-2: Manufacturer: 04G626000611BQ2BB000LFR
[    2.357413] hid-generic 0003:248A:8366.0001: input,hidraw0: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-0000:00:12.0-1/input0
[    2.380824] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.380876] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.387207] ata1.00: ATA-8: ST320LM001 HN-M320MBB, 2AR10001, max UDMA/133
[    2.387217] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.393597] ata1.00: configured for UDMA/133
[    2.394131] scsi 0:0:0:0: Direct-Access     ATA      ST320LM001 HN-M3 0001 PQ: 0 ANSI: 5
[    2.395018] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.395025] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.395183] sd 0:0:0:0: [sda] Write Protect is off
[    2.395190] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.395259] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.395755] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.396021] ata2.00: ATAPI: PIONEER DVD-RW DVRTD11RS, 1.05, max UDMA/100
[    2.409390] ata2.00: configured for UDMA/100
[    2.427037] scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW DVRTD11RS 1.05 PQ: 0 ANSI: 5
[    2.448841] tsc: Refined TSC clocksource calibration: 1647.004 MHz
[    2.448860] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17bd97ec267, max_idle_ns: 440795259945 ns
[    2.468262] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.468273] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.468818] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.469028] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.501837]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[    2.504268] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.805185] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[    2.817867] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[    2.830477] psmouse serio4: elantech: Elan sample query result 05, 24, 64
[    2.893239] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input13
[    3.449603] clocksource: Switched to clocksource tsc
[    3.786070] random: nonblocking pool is initialized
[    4.285720] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    4.985652] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    5.272045] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[    5.443546] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    5.444012] systemd[1]: Detected architecture x86-64.
[    5.454037] systemd[1]: Set hostname to <hazar>.
[    6.249059] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.249246] systemd[1]: Created slice Root Slice.
[    6.249386] systemd[1]: Listening on udev Control Socket.
[    6.249461] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.249612] systemd[1]: Listening on Journal Socket.
[    6.249735] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.249772] systemd[1]: Reached target Remote File Systems (Pre).
[    6.249808] systemd[1]: Reached target User and Group Name Lookups.
[    6.250085] systemd[1]: Created slice System Slice.
[    6.252257] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.254869] systemd[1]: Starting Setup Virtual Console...
[    6.257082] systemd[1]: Starting Uncomplicated firewall...
[    6.261381] systemd[1]: Starting Increase datagram queue length...
[    6.480635] systemd[1]: Starting Load Kernel Modules...
[    6.481211] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    6.484259] systemd[1]: Started Braille Device Support.
[    6.485379] systemd[1]: Created slice system-getty.slice.
[    6.485623] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.489184] systemd[1]: Mounting Huge Pages File System...
[    6.489631] systemd[1]: Listening on Journal Audit Socket.
[    6.492252] systemd[1]: Mounting POSIX Message Queue File System...
[    6.492341] systemd[1]: Reached target Encrypted Volumes.
[    6.495236] systemd[1]: Mounting Debug File System...
[    6.495505] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.495986] systemd[1]: Created slice User and Session Slice.
[    6.498608] systemd[1]: Started Read required files in advance.
[    6.498983] systemd[1]: Reached target Slices.
[    6.499215] systemd[1]: Listening on udev Kernel Socket.
[    6.501821] systemd[1]: Starting udev Coldplug all Devices...
[    6.506054] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.506936] systemd[1]: Started Setup Virtual Console.
[    6.513841] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.650911] systemd[1]: Started Uncomplicated firewall.
[    6.681043] systemd[1]: Started Increase datagram queue length.
[    6.681432] systemd[1]: Listening on Syslog Socket.
[    6.683635] systemd[1]: Starting Journal Service...
[    6.901708] systemd[1]: Mounted Huge Pages File System.
[    6.901820] systemd[1]: Mounted Debug File System.
[    6.901894] systemd[1]: Mounted POSIX Message Queue File System.
[    7.113831] lp: driver loaded but no devices found
[    7.178321] ppdev: user-space parallel port driver
[    7.308317] systemd[1]: Started Load Kernel Modules.
[    7.310904] systemd[1]: Starting Apply Kernel Variables...
[    7.313892] systemd[1]: Mounting FUSE Control File System...
[    7.344287] systemd[1]: Mounted FUSE Control File System.
[    7.411835] systemd[1]: Started udev Coldplug all Devices.
[    7.419746] systemd[1]: Started Journal Service.
[    8.256074] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[    8.563250] usb 1-2: new low-speed USB device number 2 using xhci_hcd
[    8.607930] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SBSM) (20150619/utaddress-254)
[    8.607948] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.654433] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    8.654440] AMD IOMMUv2 functionality not available on this system
[    8.683947] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.728004] usb 1-2: New USB device found, idVendor=1c4f, idProduct=0002
[    8.728013] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.728018] usb 1-2: Product: USB Keykoard
[    8.728023] usb 1-2: Manufacturer: SIGMACH1P
[    8.728300] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    8.728315] usb 1-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[    8.733090] systemd-journald[202]: Received request to flush runtime journal from PID 1
[    8.742798] input: SIGMACH1P USB Keykoard as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/0003:1C4F:0002.0002/input/input15
[    8.795690] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACH1P USB Keykoard] on usb-0000:00:10.0-2/input0
[    8.806892] input: SIGMACH1P USB Keykoard as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.1/0003:1C4F:0002.0003/input/input16
[    8.859681] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACH1P USB Keykoard] on usb-0000:00:10.0-2/input1
[    9.832133] media: Linux media interface: v0.10
[    9.854859] kvm: Nested Virtualization enabled
[    9.854872] kvm: Nested Paging enabled
[    9.958873] Linux video capture interface: v2.00
[   10.127748] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input17
[   10.153738] snd_hda_codec_via hdaudioC1D0: autoconfig for VT1802: line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:speaker
[   10.153749] snd_hda_codec_via hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.153754] snd_hda_codec_via hdaudioC1D0:    hp_outs=1 (0x25/0x0/0x0/0x0/0x0)
[   10.153759] snd_hda_codec_via hdaudioC1D0:    mono: mono_out=0x0
[   10.153762] snd_hda_codec_via hdaudioC1D0:    inputs:
[   10.153768] snd_hda_codec_via hdaudioC1D0:      Mic=0x2b
[   10.153772] snd_hda_codec_via hdaudioC1D0:      Internal Mic=0x29
[   10.166367] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input18
[   10.166566] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input19
[   10.516722] asus_wmi: ASUS WMI generic driver loaded
[   10.869043] asus_wmi: Initialization: 0x1
[   10.869130] asus_wmi: BIOS WMI version: 0.0
[   10.869235] asus_wmi: SFUN value: 0x4a0077
[   10.871569] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input20
[   10.885794] asus_wmi: Number of fans: 1
[   10.952069] uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (1bcf:2883)
[   10.970421] input: ASUS USB2.0 Webcam as /devices/pci0000:00/0000:00:12.2/usb3/3-2/3-2:1.0/input/input21
[   10.970615] usbcore: registered new interface driver uvcvideo
[   10.970620] USB Video Class driver (1.1.1)
[   11.047045] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0013 detected
[   11.054991] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[   11.147773] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.266114] rt2800pci 0000:01:00.0 wlp1s0f0: renamed from wlan0
[   12.445297] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   12.445307] Disabling lock debugging due to kernel taint
[   12.464774] fglrx: module verification failed: signature and/or required key missing - tainting kernel
[   12.493347] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3380 MBytes.
[   12.493551] <6>[fglrx]   vendor: 1002 device: 9806 revision: 0 count: 1
[   12.494169] <6>[fglrx] ioport: bar 1, base 0xf000, size: 0x100
[   12.494791] <6>[fglrx] Kernel PAT support is enabled
[   12.494829] <6>[fglrx] module loaded - fglrx 15.20.3 [Sep  8 2015] with 1 minors
[   12.627541] cfg80211: World regulatory domain updated:
[   12.627553] cfg80211:  DFS Master region: unset
[   12.627557] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   12.627562] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   12.627567] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   12.627571] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   12.627575] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   12.627580] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   12.627584] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   12.627588] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   12.627591] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   13.685044] Adding 3998716k swap on /dev/sda6.  Priority:-1 extents:1 across:3998716k FS
[   20.612401] EXT4-fs (sda5): mounting ext2 file system using the ext4 subsystem
[   20.659234] EXT4-fs (sda5): mounted filesystem without journal. Opts: (null)
[   20.994796] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[   22.855635] audit: type=1400 audit(1451505906.253:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=467 comm="apparmor_parser"
[   22.855659] audit: type=1400 audit(1451505906.253:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=467 comm="apparmor_parser"
[   22.872977] audit: type=1400 audit(1451505906.269:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=467 comm="apparmor_parser"
[   22.873003] audit: type=1400 audit(1451505906.269:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=467 comm="apparmor_parser"
[   22.873019] audit: type=1400 audit(1451505906.269:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=467 comm="apparmor_parser"
[   22.873034] audit: type=1400 audit(1451505906.269:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=467 comm="apparmor_parser"
[   22.923508] audit: type=1400 audit(1451505906.321:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=467 comm="apparmor_parser"
[   22.923537] audit: type=1400 audit(1451505906.321:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=467 comm="apparmor_parser"
[   22.923554] audit: type=1400 audit(1451505906.321:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=467 comm="apparmor_parser"
[   22.923570] audit: type=1400 audit(1451505906.321:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=467 comm="apparmor_parser"
[   25.461596] cgroup: new mount options do not match the existing superblock, will be ignored
[   29.011618] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   29.013055] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   29.013880] alx 0000:02:00.0 enp2s0: NIC Up: 100 Mbps Full
[   29.014096] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   29.057317] IPv6: ADDRCONF(NETDEV_UP): wlp1s0f0: link is not ready
[   29.057511] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[   29.095564] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[   29.220556] IPv6: ADDRCONF(NETDEV_UP): wlp1s0f0: link is not ready
[   29.988377] IPv6: ADDRCONF(NETDEV_UP): wlp1s0f0: link is not ready
[   35.021445] <6>[fglrx] Firegl kernel thread PID: 896
[   35.021897] <6>[fglrx] Firegl kernel thread PID: 897
[   35.022346] <6>[fglrx] Firegl kernel thread PID: 898
[   35.022678] <6>[fglrx] IRQ 32 Enabled
[   35.031388] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[   35.031395] <6>[fglrx] Reserved FB block: Unshared offset:fb64000, size:4000
[   35.031398] <6>[fglrx] Reserved FB block: Unshared offset:fb68000, size:498000
[   35.031402] <6>[fglrx] Reserved FB block: Unshared offset:17fed000, size:13000
[   35.088931] <6>[fglrx] ATIF platform detected with notification ID: 0x81


Kod Seç Genişlet

dpkg -l | grep fglrx
Çıktısı :

Kod Seç Genişlet

ii  fglrx-amdcccle-updates                        2:15.201-0ubuntu2~15.10.2                  amd64        Catalyst Control Center for the AMD graphics accelerators
ii  fglrx-updates                                 2:15.201-0ubuntu2~15.10.2                  amd64        Video driver for the AMD graphics accelerators
ii  fglrx-updates-core                            2:15.201-0ubuntu2~15.10.2                  amd64        Minimal video driver for the AMD graphics accelerators

Kod Seç Genişlet

glxinfo | grep render
Çıktısı :

Kod Seç Genişlet

direct rendering: Yes
OpenGL renderer string: AMD Radeon HD 6320 Graphics
    GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
    GL_KTX_buffer_region, GL_NV_blend_square, GL_NV_conditional_render,
    GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
    GL_KTX_buffer_region, GL_NV_blend_square, GL_NV_conditional_render,

[heartsmagic]

Makinenin marka ve modeli nedir?

[hazar27]

Asus x55u hocam yetkili servise ısınmasından dolayı sorsum ama 74 75 derece ısınması normal bi durum diyo

[heartsmagic]

Açar açmaz mı bu sıcaklığa geliyor yoksa internetten film izlerken, oyun oynarken falan mı? Normal değil o sıcaklıklar, zorlanması lazım makinenin biraz.

[hazar27]

Hocam google chrome tarayıcısını kullanıyom ordanda youtubeden video  filan açıyom bide başka bi sekmede internette dolaşıyom o kadar firefoxtada aynı sonuçları veriyo

[heartsmagic]

Yani, normal değil o sıcaklıklar. Sırasıyla şunları denetelim sana:

- indicator-cpufreq
- tlp
- thermald

İlkinden başlayalım. Ubuntu'nun hangi sürümünü kurmuştun?

[hazar27]

Hocam ilk başta debian kullanıyodum sıcaklık sorunu oldu sonra ubuntu kurdum sonuç yine aynı olunca debianı yeniden kurdum şuanda sıcaklık 60 65 gösteriyo o yukarıdaki dedikleriniz denian içinde geçerlimidir

[heartsmagic]

Sistem açılır açılmaz 60-65 olması yine normal değil. Dağıtım değiştirerek sorunları çözemezsin, en azından değiştireceksen köken olarak başka bir dağıtım dene. Ubuntu zaten Debian tarafından alıyor temelini, başka bir dağıtım dene.

Debian için geçerli midir? Bilemiyorum, doğrudan olmayabilir. Örneğin indicator-cpufreq haliyle Debian tarafında yok, elle bizim taraftan kurulabiliyor ancak ne kadar sağlıklı çalışır bilemem. Neticede bize özel bir araç. İlki için aşağıdaki anlatımı uygulamaya çalış Debian üzerinde.

https://wiki.debian.org/HowTo/CpuFrequencyScaling

[hazar27]

Hocam konuyu en iyisi kapatalım çünkü sorun ne ise bulamadım ve çözülmüyoda windowsdada ısı derecesi aynı şekilde galiba benim sorunum donanımsal bi sorun yardımlarından dolayı bütün arkadaşlara teşekkür ederim Allah razı olsun

[if]

@hazar27, bilgisayarın içini temizlemeyi düşünebilirsiniz. Duana icabet edeyim: amni!