Ubuntu üzerine Kubuntu

[Aequitas]

Terminal aracılığı ile

Kod Seç Genişlet

sudo apt-get install kubuntu-desktop komutunu kullanarak KDE kurdum. Kurulum sırasında lightdm/kdm arasında bir seçim yapmam gerektiğini sordu, lightdm'yi seçtim. Kurulum bittikten sonra yeniden başlattım ve KDE'yi açtım. Fakat şöyle bir sorunum var.

Başlangıçta açılan uygulamaları ikişer ya da üçer tane açıyor.
Acaba lightdm ile ilgili bir uyuşmazlık mı var ki? Acaba kdm'yi mi varsayılan olarak mı ayarlamalıydım? Bu sonradan yapılabiliyor mu?
Ubuntu'daki başlangıç uygulamalarının yerine "autostart" isimli bir uygulama var, acaba her ikisi de çalışıyor da her ikisi de mi başlangıçta açılmasını istediğim uygulamaları fazla fazla açıyor? Kafam çok karıştı.

[if]

Hangi uygulamalar @Aequitas?

[burk]

Kod Seç Genişlet

dmesg çıktısı nedir?
Aslında bunun bir de .txt dosyaya yazdırılma olayı vardı ancak şu an ne yazık ki Ubuntu üzerinde değilim, notlarıma ulaşamıyorum.

[if]

Kod Seç Genişlet

dmesg çıktısı nedir?
Aslında bunun bir de .txt dosyaya yazdırılma olayı vardı ancak şu an ne yazıkki Ubuntu üzerinde değilim, notlarıma ulaşamıyorum.

Kod Seç Genişlet

dmesg 1> dmesg.txt

[burk]

@if, teşekkür ederim hatırlatma için, tam olarak bu kod bir fikir verebilir.

[if]

Rica ederim @burk.

[Aequitas]

Kod Seç Genişlet

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.0-14-generic (buildd@palmer) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #23-Ubuntu SMP Mon Nov 21 20:34:47 UTC 2011 (Ubuntu 3.0.0-14.23-generic 3.0.9)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f680000 (usable)
[    0.000000]  BIOS-e820: 000000007f680000 - 000000007f68e000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007f68e000 - 000000007f6d0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f6d0000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
[    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[    0.000000] DMI present.
[    0.000000] DMI: ASUSTeK Computer INC. 1015PEM/1015PE, BIOS 0903    11/08/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7f680 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 080000000 write-back
[    0.000000]   1 base 07F700000 mask 0FFF00000 uncachable
[    0.000000]   2 base 07F800000 mask 0FF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[    0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[    0.000000] total RAM covered: 2039M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 16M num_reg: 3  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[    0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[    0.000000] RAMDISK: 36ce5000 - 37ff0000
[    0.000000] Allocated new RAMDISK: 359da000 - 36ce46b8
[    0.000000] Move RAMDISK from 0000000036ce5000 - 0000000037fef6b7 to 359da000 - 36ce46b7
[    0.000000] ACPI: RSDP 000fbe90 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 7f680100 0006C (v01 _ASUS_ Notebook 11001008 MSFT 00000097)
[    0.000000] ACPI: FACP 7f680290 000F4 (v04 A_M_I_ OEMFACP  11001008 MSFT 00000097)
[    0.000000] ACPI: DSDT 7f6804a0 08450 (v02  A1563 A1563000 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 7f68e000 00040
[    0.000000] ACPI: APIC 7f680390 0006C (v02 A_M_I_ OEMAPIC  11001008 MSFT 00000097)
[    0.000000] ACPI: MCFG 7f680400 0003C (v01 A_M_I_ OEMMCFG  11001008 MSFT 00000097)
[    0.000000] ACPI: ECDT 7f680440 00055 (v01 A_M_I_ OEMECDT  11001008 MSFT 00000097)
[    0.000000] ACPI: OEMB 7f68e040 00061 (v01 A_M_I_ AMI_OEM  11001008 MSFT 00000097)
[    0.000000] ACPI: HPET 7f6888f0 00038 (v01 A_M_I_ OEMHPET  11001008 MSFT 00000097)
[    0.000000] ACPI: GSCI 7f68e0b0 02024 (v01 A_M_I_ GMCHSCI  11001008 MSFT 00000097)
[    0.000000] ACPI: SSDT 7f691320 00999 (v01  PmRef   CpuPm4 00003000 INTL 20051117)
[    0.000000] ACPI: SLIC 7f688930 00176 (v01 _ASUS_ Notebook 11001008 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1150MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007f680
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007f680
[    0.000000] On node 0 totalpages: 521743
[    0.000000] free_area_init_node: node 0, pgdat c17b3400, node_mem_map f49ea200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2302 pages used for memmap
[    0.000000]   HighMem zone: 292228 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages/cpu @f7000000 s26240 r0 d22912 u1048576
[    0.000000] pcpu-alloc: s26240 r0 d22912 u1048576 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517665
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-14-generic root=UUID=9234af3f-0c75-4bf2-a982-558909b53fc8 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 8349440 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0007f680)
[    0.000000] Memory: 2032408k/2087424k available (5335k kernel code, 54564k reserved, 2592k data, 696k init, 1178120k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc17bf000 - 0xc186d000   ( 696 kB)
[    0.000000]       .data : 0xc1535d84 - 0xc17be080   (2592 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1535d84   (5335 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:712 16
[    0.000000] CPU 0 irqstacks, hard=f3c0a000 soft=f3c0c000
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1499.808 MHz processor.
[    0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 2999.61 BogoMIPS (lpj=5999232)
[    0.004019] pid_max: default: 32768 minimum: 301
[    0.004075] Security Framework initialized
[    0.004112] AppArmor: AppArmor initialized
[    0.004118] Yama: becoming mindful.
[    0.004246] Mount-cache hash table entries: 512
[    0.004542] Initializing cgroup subsys cpuacct
[    0.004559] Initializing cgroup subsys memory
[    0.004579] Initializing cgroup subsys devices
[    0.004585] Initializing cgroup subsys freezer
[    0.004592] Initializing cgroup subsys net_cls
[    0.004598] Initializing cgroup subsys blkio
[    0.004615] Initializing cgroup subsys perf_event
[    0.004677] CPU: Physical Processor ID: 0
[    0.004683] CPU: Processor Core ID: 0
[    0.004690] mce: CPU supports 5 MCE banks
[    0.004708] CPU0: Thermal monitoring enabled (TM2)
[    0.004716] using mwait in idle threads.
[    0.011257] ACPI: Core revision 20110413
[    0.024030] ftrace: allocating 24878 entries in 49 pages
[    0.028110] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.028523] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068570] CPU0: Intel(R) Atom(TM) CPU N550   @ 1.50GHz stepping 0a
[    0.072003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[    0.072003] ... version:                3
[    0.072003] ... bit width:              40
[    0.072003] ... generic registers:      2
[    0.072003] ... value mask:             000000ffffffffff
[    0.072003] ... max period:             000000007fffffff
[    0.072003] ... fixed-purpose events:   3
[    0.072003] ... event mask:             0000000700000003
[    0.072003] CPU 1 irqstacks, hard=f3cd2000 soft=f3cd4000
[    0.072003] Booting Node   0, Processors  #1
[    0.072003] smpboot cpu 1: start_ip = 9b000
[    0.008000] Initializing CPU#1
[    0.164214] CPU 2 irqstacks, hard=f3cde000 soft=f3ce0000
[    0.164221]  #2
[    0.164225] smpboot cpu 2: start_ip = 9b000
[    0.008000] Initializing CPU#2
[    0.256273] CPU 3 irqstacks, hard=f3cea000 soft=f3cec000
[    0.256280]  #3 Ok.
[    0.256285] smpboot cpu 3: start_ip = 9b000
[    0.008000] Initializing CPU#3
[    0.348021] TSC synchronization [CPU#0 -> CPU#3]:
[    0.348021] Measured 81 cycles TSC warp between CPUs, turning off TSC clock.
[    0.348021] Marking TSC unstable due to check_tsc_sync_source failed
[    0.348043] Brought up 4 CPUs
[    0.348049] Total of 4 processors activated (11998.60 BogoMIPS).
[    0.350424] devtmpfs: initialized
[    0.350424] PM: Registering ACPI NVS region at 7f68e000 (270336 bytes)
[    0.357229] print_constraints: dummy:
[    0.357270] Time: 22:11:39  Date: 12/17/11
[    0.357365] NET: Registered protocol family 16
[    0.357392] Trying to unpack rootfs image as initramfs...
[    0.357752] EISA bus registered
[    0.357781] ACPI: bus type pci registered
[    0.357977] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.357989] PCI: not using MMCONFIG
[    0.358281] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[    0.358289] PCI: Using configuration type 1 for base access
[    0.361918] bio: create slab <bio-0> at 0
[    0.367490] ACPI: EC: EC description table is found, configuring boot EC
[    0.373316] ACPI: Executed 1 blocks of module-level executable AML code
[    0.385233] ACPI: SSDT 7f690740 002F8 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.389158] ACPI: Dynamic OEM Table Load:
[    0.389172] ACPI: SSDT   (null) 002F8 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.389769] ACPI: SSDT 7f690bf0 00724 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.391066] ACPI: Dynamic OEM Table Load:
[    0.391079] ACPI: SSDT   (null) 00724 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.392055] ACPI: SSDT 7f690520 00217 (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.393502] ACPI: Dynamic OEM Table Load:
[    0.393516] ACPI: SSDT   (null) 00217 (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.393895] ACPI: SSDT 7f690b60 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    0.395203] ACPI: Dynamic OEM Table Load:
[    0.395216] ACPI: SSDT   (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    0.396203] ACPI: SSDT 7f690300 00217 (v01  PmRef  Cpu2Ist 00003000 INTL 20051117)
[    0.397653] ACPI: Dynamic OEM Table Load:
[    0.397667] ACPI: SSDT   (null) 00217 (v01  PmRef  Cpu2Ist 00003000 INTL 20051117)
[    0.398038] ACPI: SSDT 7f690ad0 00085 (v01  PmRef  Cpu2Cst 00003000 INTL 20051117)
[    0.399357] ACPI: Dynamic OEM Table Load:
[    0.399370] ACPI: SSDT   (null) 00085 (v01  PmRef  Cpu2Cst 00003000 INTL 20051117)
[    0.400383] ACPI: SSDT 7f6900e0 00217 (v01  PmRef  Cpu3Ist 00003000 INTL 20051117)
[    0.401858] ACPI: Dynamic OEM Table Load:
[    0.401872] ACPI: SSDT   (null) 00217 (v01  PmRef  Cpu3Ist 00003000 INTL 20051117)
[    0.402231] ACPI: SSDT 7f690a40 00085 (v01  PmRef  Cpu3Cst 00003000 INTL 20051117)
[    0.403590] ACPI: Dynamic OEM Table Load:
[    0.403604] ACPI: SSDT   (null) 00085 (v01  PmRef  Cpu3Cst 00003000 INTL 20051117)
[    0.404333] ACPI: Interpreter enabled
[    0.404352] ACPI: (supports S0 S3 S4 S5)
[    0.404421] ACPI: Using IOAPIC for interrupt routing
[    0.404524] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.406341] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.406352] PCI: Using MMCONFIG for extended config space
[    0.422134] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.426192] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.426815] ACPI: No dock devices found.
[    0.426825] HEST: Table not found.
[    0.426838] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.427131] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.427717] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.427729] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.427740] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.427750] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.427760] pci_root PNP0A08:00: host bridge window [mem 0x7f700000-0xfed8ffff]
[    0.427797] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600
[    0.427878] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300
[    0.427902] pci 0000:00:02.0: reg 10: [mem 0xf7e00000-0xf7e7ffff]
[    0.427918] pci 0000:00:02.0: reg 14: [io  0xdc00-0xdc07]
[    0.427933] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[    0.427949] pci 0000:00:02.0: reg 1c: [mem 0xf7d00000-0xf7dfffff]
[    0.428046] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380
[    0.428068] pci 0000:00:02.1: reg 10: [mem 0xf7e80000-0xf7efffff]
[    0.428218] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[    0.428257] pci 0000:00:1b.0: reg 10: [mem 0xf7cf8000-0xf7cfbfff 64bit]
[    0.428371] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.428384] pci 0000:00:1b.0: PME# disabled
[    0.428431] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[    0.428558] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.428572] pci 0000:00:1c.0: PME# disabled
[    0.428624] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[    0.428744] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.428756] pci 0000:00:1c.1: PME# disabled
[    0.428809] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
[    0.428927] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.428939] pci 0000:00:1c.3: PME# disabled
[    0.428993] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[    0.429071] pci 0000:00:1d.0: reg 20: [io  0xd400-0xd41f]
[    0.429135] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[    0.429213] pci 0000:00:1d.1: reg 20: [io  0xd480-0xd49f]
[    0.429276] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[    0.429355] pci 0000:00:1d.2: reg 20: [io  0xd800-0xd81f]
[    0.429419] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[    0.429499] pci 0000:00:1d.3: reg 20: [io  0xd880-0xd89f]
[    0.429592] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[    0.429631] pci 0000:00:1d.7: reg 10: [mem 0xf7cf7c00-0xf7cf7fff]
[    0.429751] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.429764] pci 0000:00:1d.7: PME# disabled
[    0.429804] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.429923] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[    0.430104] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
[    0.430146] pci 0000:00:1f.2: reg 10: [io  0xd080-0xd087]
[    0.430168] pci 0000:00:1f.2: reg 14: [io  0xd000-0xd003]
[    0.430190] pci 0000:00:1f.2: reg 18: [io  0xcc00-0xcc07]
[    0.430212] pci 0000:00:1f.2: reg 1c: [io  0xc880-0xc883]
[    0.430233] pci 0000:00:1f.2: reg 20: [io  0xc800-0xc81f]
[    0.430256] pci 0000:00:1f.2: reg 24: [mem 0xf7cf7800-0xf7cf7bff]
[    0.430325] pci 0000:00:1f.2: PME# supported from D3hot
[    0.430338] pci 0000:00:1f.2: PME# disabled
[    0.430459] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[    0.430473] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.430487] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.430504] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.430660] pci 0000:02:00.0: [14e4:4727] type 0 class 0x000280
[    0.430708] pci 0000:02:00.0: reg 10: [mem 0xfbffc000-0xfbffffff 64bit]
[    0.430871] pci 0000:02:00.0: supports D1 D2
[    0.430880] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.430893] pci 0000:02:00.0: PME# disabled
[    0.436120] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[    0.436137] pci 0000:00:1c.1:   bridge window [io  0xf000-0x0000] (disabled)
[    0.436152] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.436171] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[    0.436301] pci 0000:01:00.0: [1969:1062] type 0 class 0x000200
[    0.436352] pci 0000:01:00.0: reg 10: [mem 0xf7fc0000-0xf7ffffff 64bit]
[    0.436382] pci 0000:01:00.0: reg 18: [io  0xec00-0xec7f]
[    0.436529] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.436545] pci 0000:01:00.0: PME# disabled
[    0.444092] pci 0000:00:1c.3: PCI bridge to [bus 01-01]
[    0.444109] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.444123] pci 0000:00:1c.3:   bridge window [mem 0xf7f00000-0xf7ffffff]
[    0.444140] pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.444267] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[    0.444282] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.444295] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.444313] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.444325] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.444335] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.444346] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.444357] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.444368] pci 0000:00:1e.0:   bridge window [mem 0x7f700000-0xfed8ffff] (subtractive decode)
[    0.444412] pci_bus 0000:00: on NUMA node 0
[    0.444430] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.444869] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.445006] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    0.445099] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.445192]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.445206]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.445214] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.466069] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.466261] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.466468] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.466655] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.466840] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.467028] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.467212] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.467414] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.467749] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.467781] vgaarb: loaded
[    0.467787] vgaarb: bridge control possible 0000:00:02.0
[    0.468599] SCSI subsystem initialized
[    0.468769] libata version 3.00 loaded.
[    0.468932] usbcore: registered new interface driver usbfs
[    0.468975] usbcore: registered new interface driver hub
[    0.469040] usbcore: registered new device driver usb
[    0.469040] PCI: Using ACPI for IRQ routing
[    0.469040] PCI: pci_cache_line_size set to 64 bytes
[    0.469040] Expanded resource reserved due to conflict with PCI Bus 0000:00
[    0.469040] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[    0.469040] reserve RAM buffer: 000000007f680000 - 000000007fffffff
[    0.469040] NetLabel: Initializing
[    0.469040] NetLabel:  domain hash size = 128
[    0.469040] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.469078] NetLabel:  unlabeled traffic allowed by default
[    0.469245] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.469260] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.469277] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.484108] Switching to clocksource hpet
[    0.487381] Switched to NOHz mode on CPU #0
[    0.487506] Switched to NOHz mode on CPU #3
[    0.487515] Switched to NOHz mode on CPU #2
[    0.487532] Switched to NOHz mode on CPU #1
[    0.507351] AppArmor: AppArmor Filesystem Enabled
[    0.507436] pnp: PnP ACPI init
[    0.507487] ACPI: bus type pnp registered
[    0.507791] pnp 00:00: [bus 00-ff]
[    0.507802] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.507811] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.507820] pnp 00:00: [io  0x0d00-0xffff window]
[    0.507837] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.507846] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.507856] pnp 00:00: [mem 0x7f700000-0xfed8ffff window]
[    0.508086] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.508130] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[    0.508140] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[    0.508284] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.508298] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.508312] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.508439] pnp 00:02: [dma 4]
[    0.508448] pnp 00:02: [io  0x0000-0x000f]
[    0.508457] pnp 00:02: [io  0x0081-0x0083]
[    0.508465] pnp 00:02: [io  0x0087]
[    0.508472] pnp 00:02: [io  0x0089-0x008b]
[    0.508480] pnp 00:02: [io  0x008f]
[    0.508488] pnp 00:02: [io  0x00c0-0x00df]
[    0.508578] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.508623] pnp 00:03: [io  0x0070-0x0071]
[    0.508647] pnp 00:03: [irq 8]
[    0.508731] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.508843] pnp 00:04: [io  0x0060]
[    0.508852] pnp 00:04: [io  0x0064]
[    0.508868] pnp 00:04: [irq 1]
[    0.508957] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.509079] pnp 00:05: [irq 12]
[    0.509173] pnp 00:05: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f13 (active)
[    0.509211] pnp 00:06: [io  0x0061]
[    0.509311] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.509350] pnp 00:07: [io  0x00f0-0x00ff]
[    0.509368] pnp 00:07: [irq 13]
[    0.509466] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.509918] pnp 00:08: [io  0x0010-0x001f]
[    0.509928] pnp 00:08: [io  0x0022-0x003f]
[    0.509936] pnp 00:08: [io  0x0044-0x004d]
[    0.509944] pnp 00:08: [io  0x0050-0x005e]
[    0.509952] pnp 00:08: [io  0x0063]
[    0.509960] pnp 00:08: [io  0x0065]
[    0.509968] pnp 00:08: [io  0x0067-0x006f]
[    0.509976] pnp 00:08: [io  0x0072-0x007f]
[    0.509983] pnp 00:08: [io  0x0080]
[    0.509991] pnp 00:08: [io  0x0084-0x0086]
[    0.509999] pnp 00:08: [io  0x0088]
[    0.510007] pnp 00:08: [io  0x008c-0x008e]
[    0.510015] pnp 00:08: [io  0x0090-0x009f]
[    0.510023] pnp 00:08: [io  0x00a2-0x00bf]
[    0.510031] pnp 00:08: [io  0x00e0-0x00ef]
[    0.510039] pnp 00:08: [io  0x025c-0x025f]
[    0.510047] pnp 00:08: [io  0x0380-0x0383]
[    0.510055] pnp 00:08: [io  0x0400-0x041f]
[    0.510063] pnp 00:08: [io  0x04d0-0x04d1]
[    0.510071] pnp 00:08: [io  0x0800-0x087f]
[    0.510080] pnp 00:08: [io  0x0400-0x03ff disabled]
[    0.510088] pnp 00:08: [io  0x0480-0x04bf]
[    0.510097] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[    0.510106] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[    0.510115] pnp 00:08: [mem 0xfed50000-0xfed8ffff]
[    0.510124] pnp 00:08: [mem 0xffb00000-0xffbfffff]
[    0.510132] pnp 00:08: [mem 0xfff00000-0xffffffff]
[    0.510334] system 00:08: [io  0x025c-0x025f] has been reserved
[    0.510346] system 00:08: [io  0x0380-0x0383] has been reserved
[    0.510356] system 00:08: [io  0x0400-0x041f] has been reserved
[    0.510367] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.510378] system 00:08: [io  0x0800-0x087f] has been reserved
[    0.510390] system 00:08: [io  0x0480-0x04bf] has been reserved
[    0.510402] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.510414] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.510426] system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.510439] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.510451] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[    0.510466] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.510706] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[    0.510813] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.511001] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[    0.511012] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[    0.511153] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.511165] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.511178] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.511311] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[    0.511459] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.511474] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.512330] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[    0.512343] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[    0.512353] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[    0.512363] pnp 00:0c: [mem 0x00100000-0x7f6fffff]
[    0.512372] pnp 00:0c: [mem 0xfed90000-0xffffffff]
[    0.512598] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.512611] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.512623] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.512634] system 00:0c: [mem 0x00100000-0x7f6fffff] could not be reserved
[    0.512646] system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.512659] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.513320] pnp: PnP ACPI: found 13 devices
[    0.513329] ACPI: ACPI bus type pnp unregistered
[    0.513339] PnPBIOS: Disabled by ACPI PNP
[    0.554226] PCI: max bus depth: 1 pci_try_num: 2
[    0.554314] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[    0.554329] pci 0000:00:1c.1: BAR 13: assigned [io  0x1000-0x1fff]
[    0.554342] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80200000-0x803fffff]
[    0.554356] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.554369] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.554380] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[    0.554391] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.554406] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff]
[    0.554419] pci 0000:00:1c.0:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.554437] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[    0.554447] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    0.554462] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.554476] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[    0.554493] pci 0000:00:1c.3: PCI bridge to [bus 01-01]
[    0.554504] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.554518] pci 0000:00:1c.3:   bridge window [mem 0xf7f00000-0xf7ffffff]
[    0.554532] pci 0000:00:1c.3:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
[    0.554549] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    0.554557] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.554569] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.554581] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.554609] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[    0.554651] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.554666] pci 0000:00:1c.0: setting latency timer to 64
[    0.554684] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[    0.554710] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.554723] pci 0000:00:1c.1: setting latency timer to 64
[    0.554755] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.554768] pci 0000:00:1c.3: setting latency timer to 64
[    0.554787] pci 0000:00:1e.0: setting latency timer to 64
[    0.554799] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.554809] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.554818] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.554828] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.554838] pci_bus 0000:00: resource 8 [mem 0x7f700000-0xfed8ffff]
[    0.554848] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.554857] pci_bus 0000:04: resource 1 [mem 0x80200000-0x803fffff]
[    0.554868] pci_bus 0000:04: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.554878] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.554887] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[    0.554897] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
[    0.554908] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.554917] pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff]
[    0.554927] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[    0.554938] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.554947] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.554956] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.554966] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[    0.554976] pci_bus 0000:05: resource 8 [mem 0x7f700000-0xfed8ffff]
[    0.555087] NET: Registered protocol family 2
[    0.555322] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.556072] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.557295] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.557916] TCP: Hash tables configured (established 131072 bind 65536)
[    0.557929] TCP reno registered
[    0.557946] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.557977] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.558342] NET: Registered protocol family 1
[    0.558393] pci 0000:00:02.0: Boot video device
[    0.558609] PCI: CLS 32 bytes, default 64
[    0.559938] audit: initializing netlink socket (disabled)
[    0.559969] type=2000 audit(1324159899.552:1): initialized
[    0.625723] highmem bounce pool size: 64 pages
[    0.625744] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.643182] VFS: Disk quotas dquot_6.5.2
[    0.643420] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.646094] fuse init (API version 7.16)
[    0.646450] msgmni has been set to 1668
[    0.647817] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.647941] io scheduler noop registered
[    0.647950] io scheduler deadline registered
[    0.648053] io scheduler cfq registered (default)
[    0.648383] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.648485] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.648648] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.648737] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.648892] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.648980] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    0.649212] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.649296] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.649488] intel_idle: MWAIT substates: 0x20220
[    0.649513] intel_idle: v0.4 model 0x1C
[    0.649519] intel_idle: lapic_timer_reliable_states 0x2
[    0.649737] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.649897] ACPI: AC Adapter [AC0] (on-line)
[    0.650278] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.655033] ACPI: Lid Switch [LID]
[    0.655233] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.655250] ACPI: Sleep Button [SLPB]
[    0.655398] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    0.655411] ACPI: Power Button [PWRB]
[    0.655587] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.655600] ACPI: Power Button [PWRF]
[    0.655706] ACPI: acpi_idle yielding to intel_idle
[    0.678203] thermal LNXTHERM:00: registered as thermal_zone0
[    0.678212] ACPI: Thermal Zone [TZ00] (65 C)
[    0.678270] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.678336] ERST: Table is not found!
[    0.678577] ACPI: Battery Slot [BAT0] (battery absent)
[    0.678583] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.678635] isapnp: Scanning for PnP cards...
[    1.032667] isapnp: No Plug & Play device found
[    1.392220] Freeing initrd memory: 19500k freed
[    1.459484] Linux agpgart interface v0.103
[    1.459654] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[    1.459842] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    1.460289] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.460550] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.463795] brd: module loaded
[    1.465463] loop: module loaded
[    1.466638] Fixed MDIO Bus: probed
[    1.466705] PPP generic driver version 2.4.2
[    1.466823] tun: Universal TUN/TAP device driver, 1.6
[    1.466829] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.467034] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.467107] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.467143] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.467152] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.467255] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.467294] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.467313] ehci_hcd 0000:00:1d.7: debug port 1
[    1.471208] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.471250] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7cf7c00
[    1.484034] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.484328] hub 1-0:1.0: USB hub found
[    1.484341] hub 1-0:1.0: 8 ports detected
[    1.484516] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.484552] uhci_hcd: USB Universal Host Controller Interface driver
[    1.484629] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.484644] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.484652] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.484762] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.484806] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[    1.485129] hub 2-0:1.0: USB hub found
[    1.485141] hub 2-0:1.0: 2 ports detected
[    1.485284] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.485299] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.485308] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.485402] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.485467] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[    1.485791] hub 3-0:1.0: USB hub found
[    1.485803] hub 3-0:1.0: 2 ports detected
[    1.485956] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.485971] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.485979] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.486083] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.486142] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[    1.486455] hub 4-0:1.0: USB hub found
[    1.486466] hub 4-0:1.0: 2 ports detected
[    1.486600] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    1.486614] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.486622] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.486716] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.486775] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[    1.487097] hub 5-0:1.0: USB hub found
[    1.487108] hub 5-0:1.0: 2 ports detected
[    1.487373] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.505374] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.505397] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.505713] mousedev: PS/2 mouse device common for all mice
[    1.506894] rtc_cmos 00:03: RTC can wake from S4
[    1.507080] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.507125] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.507392] device-mapper: uevent: version 1.0.3
[    1.507619] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    1.507700] EISA: Probing bus 0 at eisa.0
[    1.507706] EISA: Cannot allocate resource for mainboard
[    1.507712] Cannot allocate resource for EISA slot 1
[    1.507717] Cannot allocate resource for EISA slot 2
[    1.507722] Cannot allocate resource for EISA slot 3
[    1.507727] Cannot allocate resource for EISA slot 4
[    1.507732] Cannot allocate resource for EISA slot 5
[    1.507737] Cannot allocate resource for EISA slot 6
[    1.507742] Cannot allocate resource for EISA slot 7
[    1.507747] Cannot allocate resource for EISA slot 8
[    1.507752] EISA: Detected 0 cards.
[    1.507771] cpufreq-nforce2: No nForce2 chipset.
[    1.508087] cpuidle: using governor ladder
[    1.508529] cpuidle: using governor menu
[    1.508535] EFI Variables Facility v0.08 2004-May-17
[    1.509253] TCP cubic registered
[    1.509630] NET: Registered protocol family 10
[    1.511154] NET: Registered protocol family 17
[    1.511210] Registering the dns_resolver key type
[    1.511277] Using IPI No-Shortcut mode
[    1.511569] PM: Hibernation image not present or could not be loaded.
[    1.511594] registered taskstats version 1
[    1.525896] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.540239]   Magic number: 7:266:199
[    1.540411] rtc_cmos 00:03: setting system clock to 2011-12-17 22:11:40 UTC (1324159900)
[    1.601040] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.601047] EDD information not available.
[    1.601371] Freeing unused kernel memory: 696k freed
[    1.601846] Write protecting the kernel text: 5336k
[    1.601958] Write protecting the kernel read-only data: 2192k
[    1.650974] udevd[91]: starting version 173
[    1.733753] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.733786] atl1c 0000:01:00.0: setting latency timer to 64
[    1.741378] wmi: Mapper loaded
[    1.755052] [drm] Initialized drm 1.1.0 20060810
[    1.796101] usb 1-1: new high speed USB device number 2 using ehci_hcd
[    1.814989] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.815009] i915 0000:00:02.0: setting latency timer to 64
[    1.830225] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
[    1.866151] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    1.866171] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    1.866179] [drm] Driver supports precise vblank timestamp query.
[    1.866307] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.948290] usbcore: registered new interface driver uas
[    1.950622] Initializing USB Mass Storage driver...
[    1.951446] scsi0 : usb-storage 1-1:1.0
[    1.951832] usbcore: registered new interface driver usb-storage
[    1.951839] USB Mass Storage support registered.
[    2.164151] usb 1-6: new high speed USB device number 4 using ehci_hcd
[    2.199239] [drm] initialized overlay support
[    2.218542] fbcon: inteldrmfb (fb0) is primary device
[    2.268660] Console: switching to colour frame buffer device 128x37
[    2.276620] fb0: inteldrmfb frame buffer device
[    2.276625] drm: registered panic notifier
[    2.287001] acpi device:2c: registered as cooling_device4
[    2.287225] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    2.287442] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    2.287527] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.287631] ahci 0000:00:1f.2: version 3.0
[    2.287693] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    2.287806] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    2.287956] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[    2.287970] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[    2.287985] ahci 0000:00:1f.2: setting latency timer to 64
[    2.292148] scsi1 : ahci
[    2.293408] scsi2 : ahci
[    2.293866] scsi3 : ahci
[    2.294699] scsi4 : ahci
[    2.295578] ata1: SATA max UDMA/133 abar m1024@0xf7cf7800 port 0xf7cf7900 irq 44
[    2.295590] ata2: DUMMY
[    2.295596] ata3: DUMMY
[    2.295601] ata4: DUMMY
[    2.612108] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.614050] ata1.00: unexpected _GTF length (8)
[    2.614449] ata1.00: ATA-8: ST9320325AS, 0003SDM1, max UDMA/133
[    2.614462] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.616710] ata1.00: unexpected _GTF length (8)
[    2.617087] ata1.00: configured for UDMA/133
[    2.617415] scsi 1:0:0:0: Direct-Access     ATA      ST9320325AS      0003 PQ: 0 ANSI: 5
[    2.617968] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    2.618036] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.618363] sd 1:0:0:0: [sda] Write Protect is off
[    2.618373] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.618491] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.709050]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sda4
[    2.710466] sd 1:0:0:0: [sda] Attached SCSI disk
[    3.012580] scsi: killing requests for dead queue
[    3.020320] scsi: killing requests for dead queue
[    3.020532] scsi: killing requests for dead queue
[    3.028279] scsi: killing requests for dead queue
[    3.028483] scsi: killing requests for dead queue
[    3.028688] scsi: killing requests for dead queue
[    3.028900] scsi: killing requests for dead queue
[    3.029101] scsi: killing requests for dead queue
[    3.464127] usb 3-1: new full speed USB device number 2 using uhci_hcd
[    3.646839] usb 1-1: USB disconnect, device number 2
[    3.657665] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input6
[    3.657991] generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
[    3.663740] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input7
[    3.664178] generic-usb 0003:046D:C526.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
[    3.664224] usbcore: registered new interface driver usbhid
[    3.664230] usbhid: USB HID core driver
[    4.880314] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    7.648124] usb 1-1: new high speed USB device number 5 using ehci_hcd
[    8.280506] scsi8 : usb-storage 1-1:1.3
[    8.281483] scsi9 : usb-storage 1-1:1.4
[    9.283415] scsi 8:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[    9.283596] scsi: killing requests for dead queue
[    9.285404] scsi 9:0:0:0: Direct-Access     HUAWEI   MMC Storage      2.31 PQ: 0 ANSI: 2
[    9.285553] scsi: killing requests for dead queue
[    9.344333] scsi: killing requests for dead queue
[    9.348279] scsi: killing requests for dead queue
[    9.408332] scsi: killing requests for dead queue
[    9.408340] scsi: killing requests for dead queue
[    9.472252] scsi: killing requests for dead queue
[    9.472259] scsi: killing requests for dead queue
[    9.536271] scsi: killing requests for dead queue
[    9.540254] scsi: killing requests for dead queue
[    9.600285] scsi: killing requests for dead queue
[    9.600291] scsi: killing requests for dead queue
[    9.664239] scsi: killing requests for dead queue
[    9.664246] scsi: killing requests for dead queue
[    9.728286] scsi: killing requests for dead queue
[    9.732188] scsi: killing requests for dead queue
[    9.801604] sr0: scsi-1 drive
[    9.801618] cdrom: Uniform CD-ROM driver Revision: 3.20
[    9.801912] sr 8:0:0:0: Attached scsi CD-ROM sr0
[    9.802091] sr 8:0:0:0: Attached scsi generic sg1 type 5
[    9.802644] sd 9:0:0:0: Attached scsi generic sg2 type 0
[    9.806632] sd 9:0:0:0: [sdb] 15572992 512-byte logical blocks: (7.97 GB/7.42 GiB)
[    9.809619] sd 9:0:0:0: [sdb] Write Protect is off
[    9.809628] sd 9:0:0:0: [sdb] Mode Sense: 0f 0e 00 00
[    9.812616] sd 9:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    9.830371]  sdb:
[    9.845099] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[   17.028505] udevd[368]: starting version 173
[   17.063149] lp: driver loaded but no devices found
[   17.069183] coretemp coretemp.0: Unable to read TjMax from CPU.
[   17.069200] coretemp coretemp.0: Using relative temperature scale!
[   17.069232] coretemp coretemp.0: Unable to read TjMax from CPU.
[   17.069243] coretemp coretemp.0: Using relative temperature scale!
[   17.074284] Adding 4193276k swap on /dev/sda8.  Priority:-1 extents:1 across:4193276k
[   17.424184] cfg80211: Calling CRDA to update world regulatory domain
[   17.477818] brcmutil: module is from the staging directory, the quality is unknown, you have been warned.
[   17.487452] brcmsmac: module is from the staging directory, the quality is unknown, you have been warned.
[   17.524784] brcmsmac 0000:02:00.0: bus 2 slot 0 func 0 irq 10
[   17.524848] brcmsmac 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   17.524866] brcmsmac 0000:02:00.0: setting latency timer to 64
[   17.537458] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   17.617094] type=1400 audit(1324152716.574:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=625 comm="apparmor_parser"
[   17.618735] type=1400 audit(1324152716.574:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=625 comm="apparmor_parser"
[   17.619798] type=1400 audit(1324152716.574:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=625 comm="apparmor_parser"
[   17.688352] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   17.688489] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   17.688564] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   17.740457] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   17.758756] hda_codec: ALC269VB: BIOS auto-probing.
[   17.778139] psmouse serio1: ID: 10 00 64
[   17.811689] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   17.826376] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   17.925106] usbcore: registered new interface driver usbserial
[   17.925249] USB Serial support registered for generic
[   17.925475] usbcore: registered new interface driver usbserial_generic
[   17.925484] usbserial: USB Serial Driver core
[   17.930478] Linux video capture interface: v2.00
[   17.931246] USB Serial support registered for GSM modem (1-port)
[   17.931745] option 1-1:1.0: GSM modem (1-port) converter detected
[   17.932521] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[   17.932585] option 1-1:1.1: GSM modem (1-port) converter detected
[   17.933119] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[   17.933168] option 1-1:1.2: GSM modem (1-port) converter detected
[   17.933759] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[   17.933999] usbcore: registered new interface driver option
[   17.934009] option: v0.7.2:USB Driver for GSM modems
[   17.934362] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5702)
[   17.938390] elantech: assuming hardware version 2, firmware version 20.1.0
[   17.965979] input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input10
[   17.966306] usbcore: registered new interface driver uvcvideo
[   17.966316] USB Video Class driver (v1.1.0)
[   17.998159] elantech: Synaptics capabilities query result 0x68, 0x15, 0x0a.
[   18.176535] asus_wmi: ASUS WMI generic driver loaded
[   18.180394] asus_wmi: Initialization: 0x0
[   18.180532] asus_wmi: BIOS WMI version: 0.8
[   18.180812] asus_wmi: SFUN value: 0x0
[   18.183642] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input11
[   18.210098] cfg80211: World regulatory domain updated:
[   18.210111] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.210124] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.210134] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.210145] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.210155] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.210174] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.291427] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   18.291443] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.291453] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   18.291464] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.291474] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   18.291486] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.291494] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   18.291505] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.291514] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   18.291525] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.291533] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   18.291544] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.291553] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   18.291564] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.291573] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   18.291584] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.291594] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   18.291606] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.291615] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   18.291626] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.291636] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   18.291647] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.291656] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   18.291667] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.291676] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   18.291687] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.291697] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   18.291708] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.316105] elantech: retrying ps2 command 0xe6 (2).
[   18.509350] asus_wmi: Backlight controlled by ACPI video driver
[   18.523311] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   18.525680] cfg80211: Calling CRDA for country: US
[   18.532168] lib80211: common routines for IEEE802.11 drivers
[   18.532180] lib80211_crypt: registered algorithm 'NULL'
[   18.543834] type=1400 audit(1324152717.498:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1004 comm="apparmor_parser"
[   18.549657] type=1400 audit(1324152717.506:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1007 comm="apparmor_parser"
[   18.555259] wl: module license 'MIXED/Proprietary' taints kernel.
[   18.555275] Disabling lock debugging due to kernel taint
[   18.565074] type=1400 audit(1324152717.522:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1005 comm="apparmor_parser"
[   18.565793] type=1400 audit(1324152717.522:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1007 comm="apparmor_parser"
[   18.566790] type=1400 audit(1324152717.522:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1005 comm="apparmor_parser"
[   18.569122] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   18.569138] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[   18.569149] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   18.569161] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[   18.569189] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   18.569262] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[   18.569286] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   18.569316] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[   18.569340] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   18.569370] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[   18.569392] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   18.569421] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[   18.569444] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   18.569471] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[   18.569494] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   18.569522] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[   18.569545] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   18.569574] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[   18.569598] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   18.569627] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[   18.569649] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   18.569678] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2700 mBm)
[   18.569701] cfg80211: Disabling freq 2467 MHz
[   18.569718] cfg80211: Disabling freq 2472 MHz
[   18.569734] cfg80211: Disabling freq 2484 MHz
[   18.569753] cfg80211: Regulatory domain changed to country: US
[   18.569772] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.569798] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   18.569830] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   18.569859] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.569884] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.569909] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.569935] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   18.569979] type=1400 audit(1324152717.526:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1005 comm="apparmor_parser"
[   18.580336] type=1400 audit(1324152717.538:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1018 comm="apparmor_parser"
[   18.830374] elantech: retrying ps2 command 0xf8 (2).
[   18.939768] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[   19.001251] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.252447] init: failsafe main process (959) killed by TERM signal
[   19.257562] init: apport pre-start process (1137) terminated with status 1
[   19.318676] init: apport post-stop process (1173) terminated with status 1
[   19.333719] init: lightdm main process (1170) killed by TERM signal
[   19.532082] elantech: retrying ps2 command 0xf8 (1).
[   20.097015] input: ETPS/2 Elantech imleçsürer ( * touchpad) as /devices/platform/i8042/serio1/input/input12
[   22.210689] Bluetooth: Core ver 2.16
[   22.210766] NET: Registered protocol family 31
[   22.210771] Bluetooth: HCI device and connection manager initialized
[   22.210778] Bluetooth: HCI socket layer initialized
[   22.210783] Bluetooth: L2CAP socket layer initialized
[   22.210924] Bluetooth: SCO socket layer initialized
[   22.220170] Bluetooth: RFCOMM TTY layer initialized
[   22.220194] Bluetooth: RFCOMM socket layer initialized
[   22.220201] Bluetooth: RFCOMM ver 1.11
[   22.227703] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.227713] Bluetooth: BNEP filters: protocol multicast
[   22.337345] ppdev: user-space parallel port driver
[   23.363732] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[   23.371538] EXT4-fs (sda7): re-mounted. Opts: commit=0
[   23.806546] init: plymouth-stop pre-start process (1445) terminated with status 1
[   45.062171] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[   45.285578] EXT4-fs (sda7): re-mounted. Opts: commit=0
[  514.410302] PPP BSD Compression module registered
[  514.432538] PPP Deflate Compression module registered
[ 2842.992106] CE: hpet increased min_delta_ns to 20113 nsec
[ 4176.214778] show_signal_msg: 27 callbacks suppressed
[ 4176.214791] indicator-weath[1888]: segfault at a ip 003f790e sp bfcafcac error 4 in libc-2.13.so[385000+176000]


conky ve Felah uygulamaları çoklu açılıyor. Mesela conky 3 tane, Felah 2 tane açılıyor. Conky'nin başlangıç şeklini değiştirmiştim, basit bir betik ile 10 saniye gecikmeli başlatacak şekilde eklemiştim başlangıca.

O değil de, şu koca çıktıdan anladıklarınızı keşke ben de anlayabilsem

[if]

@Aequitas, bu uygulamaları başlangıçta başlatmak için hangi yöntemi deniyosun? .xinitrc mi?

[Aequitas]

@if, xinitrc'nin ne olduğunu bilmiyorum. Conky için dediğim gibi bir betik yaptım sleep komutu içeren. Başlangıç uygulamaları kısmına bu betiği ekledim. Felah programının da başlangıç uygulamalarında girdisi var.

[bytan]

@Aequitas,

Gnome'daki başlangıç uygulama listesindeki çift açılan uygulamaları temizlediğinde kdm'yi açtığında durum ne oluyor?

[İskender]

ben ubuntunun üzerine kubuntu yükledim yeniden başlatım ama yinede ubuntu olarak açıldı...

[bytan]

Oturum açma ekranında seçim yaptın mı?

[İskender]

@ bytan oturum açma ekranı normal olarak geliyor yani ek bir iletişim kutusu oluşmuyor

[cagriemer]

Orada bir disli isareti yok mu?

[heartsmagic]

Ben de sorayım Ubuntu üzerine KDE mi yüklendi yoksa Ubuntu'un üzerine, yani aynı bölüme Kubuntu mu yüklendi?

[İskender]

benim sorunum çözüldü bilginize..

[bytan]

benim sorunum çözüldü bilginize..

Nasıl?

[İskender]

@cagriemer'ın dediği üzere ubuntu üzerine tıkladım orada Kubuntu simgesi ve seçmesi vardı onu seçip tamam dedim böylece Kubuntu'ya geçmiş oldum..