[Çözüldü] Casper laptop atheros ar9285 ag sorunu

[AscorbaT]

Ubuntu da yeniyim.
Sistem kablosuz kartımı kapalı gösteriyor

Kod Seç Genişlet

wirelles is disabled by hardware switch yazıyor ve hiç bir türlü etkinleştiremedim.

Gerekli kodlar:

Kod Seç Genişlet

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=11.10
DISTRIB_CODENAME=oneiric
DISTRIB_DESCRIPTION="Ubuntu 11.10"

Kod Seç Genişlet

Linux AscorbaT 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux


Kod Seç Genişlet

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06)
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06)
01:00.0 VGA compatible controller: ATI Technologies Inc Madison [AMD Radeon HD 5000M Series]
01:00.1 Audio device: ATI Technologies Inc Redwood HDMI Audio [Radeon HD 5600 Series]
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
06:00.0 Ethernet controller: Atheros Communications AR8131 Gigabit Ethernet (rev c0)
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)

Kod Seç Genişlet

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 13d3:3286 IMC Networks
Bus 001 Device 004: ID 05c8:030d Cheng Uei Precision Industry Co., Ltd (Foxlink)

Kod Seç Genişlet

0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
1: hci0: Bluetooth
Soft blocked: no
Hard blocked: no


Kod Seç Genişlet

*-network DISABLED     
       description: Wireless interface
       product: AR9285 Wireless Network Adapter (PCI-Express)
       vendor: Atheros Communications Inc.
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: wlan0
       version: 01
       serial: 48:5d:60:c4:81:37
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=ath9k driverversion=3.0.0-12-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn
       resources: irq:17 memory:f1d00000-f1d0ffff
  *-network
       description: Ethernet interface
       product: AR8131 Gigabit Ethernet
       vendor: Atheros Communications
       physical id: 0
       bus info: pci@0000:06:00.0
       logical name: eth0
       version: c0
       serial: e0:69:95:1f:9a:df
       size: 100Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.2.5 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
       resources: irq:48 memory:f1c00000-f1c3ffff ioport:b000(size=128)

Kod Seç Genişlet

eth0      Link encap:Ethernet  HWaddr e0:69:95:1f:9a:df 
          inet addr:192.168.2.5  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::e269:95ff:fe1f:9adf/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:250958 errors:0 dropped:0 overruns:0 frame:0
          TX packets:129662 errors:0 dropped:0 overruns:0 carrier:1
          collisions:0 txqueuelen:1000
          RX bytes:374754209 (374.7 MB)  TX bytes:9199240 (9.1 MB)
          Interrupt:48

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:192 errors:0 dropped:0 overruns:0 frame:0
          TX packets:192 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:15168 (15.1 KB)  TX bytes:15168 (15.1 KB)


Kod Seç Genişlet

lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off

Kod Seç Genişlet

lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

wlan0     Failed to read scan data : Network is down


Kod Seç Genişlet

Module                  Size  Used by
zd1211rw               59482  0
bnep                   18436  0
rfcomm                 47946  0
parport_pc             36962  0
ppdev                  17113  0
snd_hda_codec_hdmi     32040  1
binfmt_misc            17540  1
snd_hda_codec_realtek   330769  1
joydev                 17693  0
usbhid                 47198  0
hid                    95463  1 usbhid
snd_seq_midi           13324  0
arc4                   12529  2
btusb                  18600  0
snd_rawmidi            30547  1 snd_seq_midi
uvcvideo               72711  0
videodev               93004  1 uvcvideo
v4l2_compat_ioctl32    17083  1 videodev
bluetooth             166112  5 bnep,rfcomm,btusb
ath9k                 127538  0
mac80211              310872  2 zd1211rw,ath9k
snd_seq_midi_event     14899  1 snd_seq_midi
snd_hda_intel          33390  3
snd_hda_codec         104802  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13668  1 snd_hda_codec
snd_seq                61896  2 snd_seq_midi,snd_seq_midi_event
ath9k_common           13839  1 ath9k
ath9k_hw              312866  2 ath9k,ath9k_common
ath                    24067  2 ath9k,ath9k_hw
snd_pcm                96755  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq_device         14540  3 snd_seq_midi,snd_rawmidi,snd_seq
cfg80211              199587  4 zd1211rw,ath9k,mac80211,ath
snd_timer              29991  2 snd_seq,snd_pcm
snd                    68266  16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_pcm,snd_seq_device,snd_timer
radeon               1015995  0
intel_ips              18089  0
psmouse                73882  0
serio_raw              13166  0
ttm                    76805  1 radeon
wmi                    19256  0
i915                  566711  8
drm_kms_helper         42558  2 radeon,i915
drm                   236330  6 radeon,ttm,i915,drm_kms_helper
i2c_algo_bit           13423  2 radeon,i915
soundcore              12680  1 snd
mei                    41480  0
video                  19412  1 i915
snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
lp                     17799  0
parport                46562  3 parport_pc,ppdev,lp
atl1c                  41643  0
ahci                   26002  2
libahci                26861  1 ahci

Kod Seç Genişlet

put/input0
[    1.076616] ACPI: Lid Switch [LID]
[    1.076653] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    1.076657] ACPI: Sleep Button [SLPB]
[    1.076684] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.076687] ACPI: Power Button [PWRF]
[    1.076712] ACPI: acpi_idle yielding to intel_idle
[    1.086387] thermal LNXTHERM:00: registered as thermal_zone0
[    1.086389] ACPI: Thermal Zone [THRM] (50 C)
[    1.086412] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.086427] ERST: Table is not found!
[    1.086500] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.118205] ACPI: Battery Slot [BAT0] (battery present)
[    1.239794] Linux agpgart interface v0.103
[    1.239857] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    1.239971] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.240817] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    1.240959] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.241705] brd: module loaded
[    1.242037] loop: module loaded
[    1.242351] Fixed MDIO Bus: probed
[    1.242367] PPP generic driver version 2.4.2
[    1.242392] tun: Universal TUN/TAP device driver, 1.6
[    1.242393] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.242446] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.242467] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.242487] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.242491] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.242514] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.242544] ehci_hcd 0000:00:1a.0: debug port 2
[    1.246447] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.246467] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1e08000
[    1.259496] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.259639] hub 1-0:1.0: USB hub found
[    1.259643] hub 1-0:1.0: 2 ports detected
[    1.259702] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.259713] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.259717] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.259746] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.259771] ehci_hcd 0000:00:1d.0: debug port 2
[    1.263682] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.263694] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1e07000
[    1.279499] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.279634] hub 2-0:1.0: USB hub found
[    1.279636] hub 2-0:1.0: 2 ports detected
[    1.279677] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.279685] uhci_hcd: USB Universal Host Controller Interface driver
[    1.279734] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.282846] i8042: Detected active multiplexing controller, rev 1.1
[    1.285789] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.285795] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.285804] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.285806] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.285807] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.285914] mousedev: PS/2 mouse device common for all mice
[    1.286023] rtc_cmos 00:06: RTC can wake from S4
[    1.286112] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.286141] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.286213] device-mapper: uevent: version 1.0.3
[    1.286264] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    1.286336] cpuidle: using governor ladder
[    1.286440] cpuidle: using governor menu
[    1.286442] EFI Variables Facility v0.08 2004-May-17
[    1.286617] TCP cubic registered
[    1.286701] NET: Registered protocol family 10
[    1.287045] NET: Registered protocol family 17
[    1.287056] Registering the dns_resolver key type
[    1.287122] PM: Hibernation image not present or could not be loaded.
[    1.287132] registered taskstats version 1
[    1.315097]   Magic number: 8:963:898
[    1.315162] pci 0000:3f:02.0: hash matches
[    1.315271] rtc_cmos 00:06: setting system clock to 2012-04-23 18:51:21 UTC (1335207081)
[    1.316654] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.316655] EDD information not available.
[    1.318093] Freeing unused kernel memory: 984k freed
[    1.318252] Write protecting the kernel read-only data: 10240k
[    1.318476] Freeing unused kernel memory: 20k freed
[    1.320963] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.321967] Freeing unused kernel memory: 1400k freed
[    1.336924] udevd[88]: starting version 173
[    1.378277] ahci 0000:00:1f.2: version 3.0
[    1.378309] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.378373] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    1.378470] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    1.378478] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
[    1.378485] ahci 0000:00:1f.2: setting latency timer to 64
[    1.378881] atl1c 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.378892] atl1c 0000:06:00.0: setting latency timer to 64
[    1.399963] scsi0 : ahci
[    1.400081] scsi1 : ahci
[    1.400144] scsi2 : ahci
[    1.400384] scsi3 : ahci
[    1.400460] scsi4 : ahci
[    1.400594] scsi5 : ahci
[    1.400913] ata1: SATA max UDMA/133 abar m2048@0xf1e06000 port 0xf1e06100 irq 45
[    1.400916] ata2: SATA max UDMA/133 abar m2048@0xf1e06000 port 0xf1e06180 irq 45
[    1.400918] ata3: DUMMY
[    1.400919] ata4: DUMMY
[    1.400921] ata5: SATA max UDMA/133 abar m2048@0xf1e06000 port 0xf1e06300 irq 45
[    1.400924] ata6: SATA max UDMA/133 abar m2048@0xf1e06000 port 0xf1e06380 irq 45
[    1.472159] atl1c 0000:06:00.0: version 1.0.1.0-NAPI
[    1.571600] usb 1-1: new high speed USB device number 2 using ehci_hcd
[    1.704300] hub 1-1:1.0: USB hub found
[    1.704464] hub 1-1:1.0: 6 ports detected
[    1.719643] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.719680] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.719712] ata6: SATA link down (SStatus 0 SControl 300)
[    1.719743] ata5: SATA link down (SStatus 0 SControl 300)
[    1.723072] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.723294] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.723301] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.724454] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.724459] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.726903] ata1.00: ATA-8: WDC WD5000BPVT-00HXZT1, 01.01A01, max UDMA/133
[    1.726909] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.726928] ata2.00: ACPI cmd ef/90:05:00:00:00:a0 (SET FEATURES) succeeded
[    1.729809] ata2.00: ATAPI: TSSTcorp CDDVDW SN-S083F, SB01, max UDMA/100
[    1.731240] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.731463] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.731470] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.735508] ata1.00: configured for UDMA/133
[    1.735572] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.735582] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.735746] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BPVT-0 01.0 PQ: 0 ANSI: 5
[    1.735875] ata2.00: ACPI cmd ef/90:05:00:00:00:a0 (SET FEATURES) succeeded
[    1.735943] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.735981] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.736024] sd 0:0:0:0: [sda] Write Protect is off
[    1.736027] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.736040] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.736521] ata2.00: configured for UDMA/100
[    1.737818] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-S083F  SB01 PQ: 0 ANSI: 5
[    1.746816] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.746821] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.746954] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.747004] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.772547]  sda: sda1 sda2 sda3
[    1.772821] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.815618] usb 2-1: new high speed USB device number 2 using ehci_hcd
[    1.952284] hub 2-1:1.0: USB hub found
[    1.952362] hub 2-1:1.0: 8 ports detected
[    2.011659] Refined TSC clocksource calibration: 2659.981 MHz.
[    2.011666] Switching to clocksource tsc
[    2.023773] usb 1-1.5: new full speed USB device number 3 using ehci_hcd
[    2.191786] usb 1-1.6: new high speed USB device number 4 using ehci_hcd
[    2.280537] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.715876] usb 2-1.3: new full speed USB device number 3 using ehci_hcd
[    9.384909] udevd[377]: starting version 173
[    9.417764] mei: module is from the staging directory, the quality is unknown, you have been warned.
[    9.418136] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.418146] mei 0000:00:16.0: setting latency timer to 64
[    9.421670] acpi device:45: registered as cooling_device4
[    9.421754] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:42/LNXVIDEO:00/input/input4
[    9.421820] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    9.425522] acpi device:48: registered as cooling_device5
[    9.425604] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5
[    9.425667] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[    9.428711] [drm] Initialized drm 1.1.0 20060810
[    9.429463] lp: driver loaded but no devices found
[    9.433579] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.433585] i915 0000:00:02.0: setting latency timer to 64
[    9.438512] wmi: Mapper loaded
[    9.450600] [drm] radeon defaulting to kernel modesetting.
[    9.450603] [drm] radeon kernel modesetting enabled.
[    9.450627] VGA switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
[    9.450687] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[    9.450696] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.450702] radeon 0000:01:00.0: setting latency timer to 64
[    9.476709] cfg80211: Calling CRDA to update world regulatory domain
[    9.508561] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[    9.508566] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    9.512075] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[    9.512082] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    9.512084] [drm] Driver supports precise vblank timestamp query.
[    9.512305] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    9.512308] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[    9.518051] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    9.518062] ath9k 0000:03:00.0: setting latency timer to 64
[    9.518792] Bluetooth: Core ver 2.16
[    9.518816] NET: Registered protocol family 31
[    9.518818] Bluetooth: HCI device and connection manager initialized
[    9.518821] Bluetooth: HCI socket layer initialized
[    9.518822] Bluetooth: L2CAP socket layer initialized
[    9.548619] Linux video capture interface: v2.00
[    9.549226] uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M Webcam (05c8:030d)
[    9.567229] input: USB2.0 UVC 1.3M Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input6
[    9.567310] usbcore: registered new interface driver uvcvideo
[    9.567313] USB Video Class driver (v1.1.0)
[    9.568606] ath: EEPROM regdomain: 0x60
[    9.568608] ath: EEPROM indicates we should expect a direct regpair map
[    9.568611] ath: Country alpha2 being used: 00
[    9.568613] ath: Regpair used: 0x60
[    9.568616] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    9.568618] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    9.568620] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    9.568623] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    9.568625] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    9.568627] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    9.568628] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    9.568631] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    9.568633] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    9.568635] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    9.568637] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    9.568639] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    9.568640] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    9.568643] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    9.568645] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    9.568647] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    9.568649] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    9.568651] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    9.568653] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    9.568654] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    9.568656] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    9.568659] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    9.568660] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[    9.568663] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    9.568665] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[    9.568667] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    9.568669] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[    9.568672] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    9.570247] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[    9.572073] Bluetooth: SCO socket layer initialized
[    9.572757] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    9.576200] usbcore: registered new interface driver btusb
[    9.580492] fixme: max PWM is zero.
[    9.582354] type=1400 audit(1335196289.760:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=527 comm="apparmor_parser"
[    9.582716] type=1400 audit(1335196289.760:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=527 comm="apparmor_parser"
[    9.582940] type=1400 audit(1335196289.760:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=527 comm="apparmor_parser"
[    9.584571] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[    9.585183] Registered led device: ath9k-phy0
[    9.585195] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900058a0000, irq=17
[    9.605538] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    9.609247] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input7
[    9.609496] generic-usb 0003:09DA:9090.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1d.0-1.3/input0
[    9.614585] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input8
[    9.614726] generic-usb 0003:09DA:9090.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1d.0-1.3/input1
[    9.614750] usbcore: registered new interface driver usbhid
[    9.614752] usbhid: USB HID core driver
[    9.760888] fbcon: inteldrmfb (fb0) is primary device
[    9.760978] Console: switching to colour frame buffer device 170x48
[    9.761004] fb0: inteldrmfb frame buffer device
[    9.761005] drm: registered panic notifier
[    9.761050] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    9.761081] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[    9.761095] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    9.761446] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[    9.761509] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    9.761578] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[    9.761605] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    9.761645] [drm] initializing kernel modesetting (REDWOOD 0x1002:0x68C1 0x1B0A:0x2046).
[    9.761714] [drm] register mmio base: 0xF0020000
[    9.761716] [drm] register mmio size: 131072
[    9.761719] vga_switcheroo: enabled
[    9.761790] radeon atpx: version is 1
[    9.764634] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[    9.764639] cfg80211: World regulatory domain updated:
[    9.764640] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    9.764643] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.764645] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.764647] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.764649] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.764651] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.807588] hda_codec: ALC269VB: BIOS auto-probing.
[    9.813234] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    9.813302] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    9.980742] atl1c 0000:06:00.0: irq 48 for MSI/MSI-X
[   10.041296] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.295485] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[   10.338676] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[   10.891200] ATOM BIOS: ASID:
[   10.891231] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   10.891234] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[   10.891240] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[   10.891242] [drm] Detected VRAM RAM=1024M, BAR=256M
[   10.891243] [drm] RAM width 128bits DDR
[   10.891326] [TTM] Zone  kernel: Available graphics memory: 3992940 kiB.
[   10.891330] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
[   10.891333] [TTM] Initializing pool allocator.
[   10.891368] [drm] radeon: 1024M of VRAM memory ready
[   10.891371] [drm] radeon: 512M of GTT memory ready.
[   10.891395] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   10.891398] [drm] Driver supports precise vblank timestamp query.
[   10.891448] radeon 0000:01:00.0: irq 49 for MSI/MSI-X
[   10.891452] radeon 0000:01:00.0: radeon: using MSI.
[   10.891488] [drm] radeon: irq initialized.
[   10.891492] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   10.892035] [drm] Loading REDWOOD Microcode
[   10.922873] radeon 0000:01:00.0: WB enabled
[   10.939330] [drm] ring test succeeded in 1 usecs
[   10.939417] [drm] radeon: ib pool ready.
[   10.939505] [drm] ib test succeeded in 0 usecs
[   10.939994] [drm] Radeon Display Connectors
[   10.939996] [drm] Connector 0:
[   10.939997] [drm]   LVDS
[   10.939999] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[   10.940001] [drm]   Encoders:
[   10.940003] [drm]     LCD1: INTERNAL_UNIPHY
[   10.940004] [drm] Connector 1:
[   10.940005] [drm]   HDMI-A
[   10.940007] [drm]   HPD1
[   10.940009] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   10.940010] [drm]   Encoders:
[   10.940012] [drm]     DFP1: INTERNAL_UNIPHY1
[   10.940013] [drm] Connector 2:
[   10.940015] [drm]   VGA
[   10.940017] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[   10.940018] [drm]   Encoders:
[   10.940020] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   11.416427] [drm] Radeon display connector LVDS-2: No monitor connected or invalid EDID
[   11.426243] [drm] Radeon display connector HDMI-A-1: No monitor connected or invalid EDID
[   11.904469] [drm] Radeon display connector VGA-2: No monitor connected or invalid EDID
[   11.904498] [drm] Internal thermal controller with fan control
[   11.904538] [drm] radeon: power management initialized
[   12.975263] [drm] fb mappable at 0xE0141000
[   12.975265] [drm] vram apper at 0xE0000000
[   12.975266] [drm] size 4325376
[   12.975267] [drm] fb depth is 24
[   12.975268] [drm]    pitch is 5632
[   12.975331] fb1: radeondrmfb frame buffer device
[   12.975336] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:00.0 on minor 1
[   12.975511] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   12.975577] HDA Intel 0000:01:00.1: irq 50 for MSI/MSI-X
[   12.975605] HDA Intel 0000:01:00.1: setting latency timer to 64
[   12.991726] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[   12.991887] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   13.230926] ppdev: user-space parallel port driver
[   13.237343] type=1400 audit(1335196293.416:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=906 comm="apparmor_parser"
[   13.237709] type=1400 audit(1335196293.416:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=906 comm="apparmor_parser"
[   13.315223] type=1400 audit(1335196293.492:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=917 comm="apparmor_parser"
[   13.315475] type=1400 audit(1335196293.492:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=918 comm="apparmor_parser"
[   13.315873] type=1400 audit(1335196293.492:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=918 comm="apparmor_parser"
[   13.316106] type=1400 audit(1335196293.492:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=918 comm="apparmor_parser"
[   13.316772] type=1400 audit(1335196293.496:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=921 comm="apparmor_parser"
[   13.384742] init: failsafe main process (792) killed by TERM signal
[   13.385643] init: apport pre-start process (954) terminated with status 1
[   13.397027] init: apport post-stop process (982) terminated with status 1
[   13.561405] Bluetooth: RFCOMM TTY layer initialized
[   13.561411] Bluetooth: RFCOMM socket layer initialized
[   13.561413] Bluetooth: RFCOMM ver 1.11
[   13.563079] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.563082] Bluetooth: BNEP filters: protocol multicast
[   14.481019] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[   14.834357] init: plymouth-stop pre-start process (1269) terminated with status 1
[   15.913919] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[  173.783914] atl1c 0000:06:00.0: irq 48 for MSI/MSI-X
[  173.844616] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  190.668967] usb 2-1.2: new high speed USB device number 4 using ehci_hcd
[  190.989002] usb 2-1.2: reset high speed USB device number 4 using ehci_hcd
[  191.081803] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[  191.081809] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[  191.081813] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[  191.081818] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[  191.081821] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[  191.081825] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[  191.081829] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[  191.081833] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[  191.081836] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[  191.081840] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[  191.081843] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[  191.081848] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[  191.081851] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[  191.081855] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[  191.081858] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[  191.081862] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[  191.081866] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[  191.081870] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[  191.081873] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[  191.081877] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[  191.081880] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[  191.081885] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[  191.081888] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[  191.081892] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[  191.081895] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[  191.081900] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[  191.081903] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[  191.081907] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm)
[  191.082055] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[  191.082920] zd1211rw 2-1.2:1.0: phy1
[  191.082949] usbcore: registered new interface driver zd1211rw
[  208.648844] usb 2-1.2: USB disconnect, device number 4
[  209.928954] usb 2-1.3: USB disconnect, device number 3
[  213.146995] init: anacron main process (975) killed by TERM signal
[  213.399750] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=600
[  213.759273] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[  237.029425] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[  237.030442] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  247.957861] eth0: no IPv6 routers present
[  379.997791] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 37598, limit 35000
[  384.998263] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 36519, limit 35000
[  530.011396] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 36182, limit 35000


Kod Seç Genişlet

[  237.029425] atl1c 0000:06:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[  237.030442] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  247.957861] eth0: no IPv6 routers present
[  379.997791] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 37598, limit 35000
[  384.998263] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 36519, limit 35000
[  530.011396] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 36182, limit 35000
[ 1767.146067] audit_printk_skb: 21 callbacks suppressed
[ 1767.146070] type=1400 audit(1335187247.591:19): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=11373 comm="apparmor_parser"
[ 1767.146172] type=1400 audit(1335187247.591:20): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=11373 comm="apparmor_parser"
[ 1767.146237] type=1400 audit(1335187247.591:21): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=11373 comm="apparmor_parser"


Şimdiden teşekkürler...

[if]

@AscorbaT, hoşgeldiniz.

Kod Seç Genişlet

Hard blocked: yes çıktısına göre kablosuz kartı donanımsal olarak kapatılmış. Kablosuz aygıtı açıp kapatmak için bir düğme olması gerek, onunla açınız. Eğer o düğme açmanıza rağmen kablosuz aygıt kapalı gösteriliyorsa

Kod Seç Genişlet

sudo rfkill unblock all komutunu uygulayın. Yine kapalı gösteriliyorsa ve windows yüklü ise bilgisayarda windowsa girip kablosuzu etkinleştirin ve ardından Ubuntu'ya dönün. Ayrıca BIOS'tan da bakılabilir kablosuzu açıp kapatmayla ilgili bir girdi varsa.

Kod Seç Genişlet

modinfo zd1211rw ne diyor?

[AscorbaT]

modinfo zd1211rw yazınca cıkanlar :

Kod Seç Genişlet

filename:       /lib/modules/3.0.0-17-generic/kernel/drivers/net/wireless/zd1211rw/zd1211rw.ko
firmware:       zd1211/zd1211_uphr
firmware:       zd1211/zd1211b_uphr
firmware:       zd1211/zd1211_ub
firmware:       zd1211/zd1211b_ub
firmware:       zd1211/zd1211_ur
firmware:       zd1211/zd1211b_ur
version:        1.0
author:         Daniel Drake
author:         Ulrich Kunitz
description:    USB driver for devices with the ZD1211 chip.
license:        GPL
srcversion:     767ED313977C634DCEF8B5A
alias:          usb:v0ACEp20FFd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0ACEp2011d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2019pED01d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v2019p5303d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1582p6003d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v157Ep300Dd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v13B1p0024d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v129Bp1667d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0DF6p0036d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0CDEp001Ad*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0BAFp0121d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0B05p171Bd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0ACEpB215d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0ACEp1215d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v083ApE506d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v083ApE503d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v083ApE501d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v083Ap4505d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v07FAp1196d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v07B8p6001d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v079Bp0062d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0586p3413d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0586p3412d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0586p3410d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0586p340Fd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0586p340Ad*dc*dsc*dp*ic*isc*ip*
alias:          usb:v054Cp0257d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v050Dp705Cd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0471p1237d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0471p1236d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0411p00DAd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0409p0248d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0053p5301d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v6891pA727d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1740p2000d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v157Ep3207d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v157Ep3204d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v157Ep300Bd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v157Ep300Ad*dc*dsc*dp*ic*isc*ip*
alias:          usb:v14EApAB13d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v14EApAB10d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v1435p0711d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v13B1p001Ed*dc*dsc*dp*ic*isc*ip*
alias:          usb:v129Bp1666d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v126FpA006d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0DF6p9075d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0DF6p9071d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0B3Bp5630d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0B3Bp1630d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0B05p170Cd*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0ACEpA211d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0ACEp1211d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v07B8p6001d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v079Bp004Ad*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0586p3409d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0586p3407d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0586p3402d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0586p3401d*dc*dsc*dp*ic*isc*ip*
alias:          usb:v0105p145Fd*dc*dsc*dp*ic*isc*ip*
depends:        mac80211,cfg80211
vermagic:       3.0.0-17-generic SMP mod_unload modversions
windows da wirelles acıkken ubuntuya geçiyorum ama fn tusuna baglı olarak calışan wirelles tusu ubuntuda işlemiyor

[if]

Ya

Kod Seç Genişlet

sudo rfkill unblock all komutunu uygulayınca ne oluyor?

[AscorbaT]

Değişen bir şey yok

[if]

@AscorbaT, FN tuşlarıyla açma kapamayı kastetmedim. Bilgisayarın sağında/solunda düğme olması gerek kablosuzu açıp kapatmaya yarayan. Açık mı o?

[AscorbaT]

tamam ben de ondan bahsediyorum bu casper wifi tusunu fn tusuna baglamış wifi tusuna bastıgında fn ile yaptıgın kombinasyonu yapıyor sadece onu tus haline getirmişler :/

[if]

Bilgisayarın marka ve modeli nedir?

Kod Seç Genişlet

sudo modprobe -r zd1211rw
sudo rfkill unblock all komutlarından sonra ne oluyor?

Kod Seç Genişlet

modinfo wmi ne diyor?

[AscorbaT]

Kod Seç Genişlet

sudo modprobe -r zd1211rw yazdıgımda her hangi bir şey cıkmadı şfremi yazdım (dogru olduguna eminim).

Kod Seç Genişlet

sudo rfkill unblock all yaptıgımda ustteki ile aynı sonuc.
Bilgisayarımın modeli : Casper nirvana cn.dxl480A

modinfo wmi :

Kod Seç Genişlet

filename:       /lib/modules/3.0.0-17-generic/kernel/drivers/platform/x86/wmi.ko
license:        GPL
description:    ACPI-WMI Mapping Driver
author:         Carlos Corbacho
srcversion:     30490921AAF540173D49C87
alias:          acpi*:pnp0c14:*
alias:          acpi*:PNP0C14:*
depends:       
vermagic:       3.0.0-17-generic SMP mod_unload modversions
parm:           debug_event:Log WMI Events [0/1] (bool)
parm:           debug_dump_wdg:Dump available WMI interfaces [0/1] (bool)
şeklinde oldu


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 23 Nisan 2012 - 19:43:06
Neden dolayı kaynaklındıgını bilmiyorum ama windows da wifi işareti wifi e baglıyken bile cıkmıyor lan simgesi olarak gösteriyor bunun ile ilgili olabilir mi ?


[eklenti yönetici tarafından silindi]

[AscorbaT]

Tamamdır sorunu cözdüm
1. olarak fn tusunun çalıştıgını fark ettim ses kısma acma parlaklık felan calısıyordu .
2. Bu modelde anladıgım kadarıyla ubuntu driveri kendisi kurmuyor ben de ndiswrapper ile windows 7 64 bit driverini kurdum sonra reboot attım wifi tusuna bastım acıldı + olarak airties de calıştı aynı şekilde.
Her şey için sagolun.

[if]

Rica ederim @AscorbaT. Geri dönüş için ben teşekkür ederim. Ben konuyu unutmuştum:) Arada kimi konular kaynayıp gidiyor işte.

Sürücüyü yükleme işlemlerini daha açık olarak anlatmanız mümkün mü?

[AscorbaT]

Tabiki anlatırım.
Resimli anlatım hazırlıyıp foruma ekleyecegim.

[if]

@AcorbaT, o kadar zahmet etmenize gerek yoktu ama olursa iyi olur. O zaman bu konuyu kilitleyeyim.

Çözüm yolu için: http://forum.ubuntu-tr.net/index.php?topic=33259.0