[Çözüldü] emerald kurulum sorunu

[kaosfeyk]

Merhaba arkadaşlar emerald ı kuramıyorum tam olarak nerede sorun var anlayamadım kodlar doğru

Kod Seç Genişlet

kaos@kaos-Aspire-5755G:~$ wget cgit.compiz.org/fusion/decorators/emerald/snapshot/emerald-0.9.5.tar.gz
--2013-01-07 18:46:35--  http://cgit.compiz.org/fusion/decorators/emerald/snapshot/emerald-0.9.5.tar.gz
cgit.compiz.org (cgit.compiz.org) çözümleniyor... 195.114.19.35
cgit.compiz.org (cgit.compiz.org)[195.114.19.35]:80 bağlanılıyor... bağlantı kuruldu.
HTTP isteği gönderildi, cevap bekleniyor... 200 OK
Uzunluk: belirtilmeyen [application/x-gzip]
Kayıt yeri: `emerald-0.9.5.tar.gz'

    [                                 <=>   ] 312.547     31,7K/s   in 10s     

2013-01-07 18:46:47 (29,8 KB/s) - `emerald-0.9.5.tar.gz' kaydedildi [312547]

kaos@kaos-Aspire-5755G:~$ tar -zxvf emerald-0.9.5.tar.gz
emerald-0.9.5/
emerald-0.9.5/AUTHORS
emerald-0.9.5/COPYING
emerald-0.9.5/ChangeLog
emerald-0.9.5/INSTALL
emerald-0.9.5/Makefile.am
emerald-0.9.5/NEWS
emerald-0.9.5/README
emerald-0.9.5/TODO
emerald-0.9.5/VERSION
emerald-0.9.5/autogen.sh
emerald-0.9.5/configure.ac
emerald-0.9.5/defaults/
emerald-0.9.5/defaults/Makefile.am
emerald-0.9.5/defaults/settings.ini
emerald-0.9.5/defaults/theme/
emerald-0.9.5/defaults/theme/Makefile.am
emerald-0.9.5/defaults/theme/buttons.above.png
emerald-0.9.5/defaults/theme/buttons.close.png
emerald-0.9.5/defaults/theme/buttons.glow.png
emerald-0.9.5/defaults/theme/buttons.help.png
emerald-0.9.5/defaults/theme/buttons.inactive_glow.png
emerald-0.9.5/defaults/theme/buttons.max.png
emerald-0.9.5/defaults/theme/buttons.menu.png
emerald-0.9.5/defaults/theme/buttons.min.png
emerald-0.9.5/defaults/theme/buttons.restore.png
emerald-0.9.5/defaults/theme/buttons.shade.png
emerald-0.9.5/defaults/theme/buttons.sticky.png
emerald-0.9.5/defaults/theme/buttons.unabove.png
emerald-0.9.5/defaults/theme/buttons.unshade.png
emerald-0.9.5/defaults/theme/buttons.unsticky.png
emerald-0.9.5/defaults/theme/theme.ini
emerald-0.9.5/defaults/theme/theme.screenshot.png
emerald-0.9.5/doc/
emerald-0.9.5/doc/Makefile.am
emerald-0.9.5/doc/emerald-theme-manager.1
emerald-0.9.5/doc/emerald.1
emerald-0.9.5/emerald.po
emerald-0.9.5/engines/
emerald-0.9.5/engines/Makefile.am
emerald-0.9.5/engines/legacy.c
emerald-0.9.5/engines/legacy_icon.h
emerald-0.9.5/engines/line.c
emerald-0.9.5/engines/oxygen.c
emerald-0.9.5/engines/oxygen_icon.h
emerald-0.9.5/engines/pixmap.c
emerald-0.9.5/engines/pixmap_icon.h
emerald-0.9.5/engines/truglass.c
emerald-0.9.5/engines/truglass_icon.h
emerald-0.9.5/engines/vrunner.c
emerald-0.9.5/engines/vrunner_icon.h
emerald-0.9.5/engines/zootreeves.c
emerald-0.9.5/engines/zootreeves_icon.h
emerald-0.9.5/include/
emerald-0.9.5/include/Makefile.am
emerald-0.9.5/include/emerald.h
emerald-0.9.5/include/engine.h
emerald-0.9.5/include/libengine.h
emerald-0.9.5/include/titlebar.h
emerald-0.9.5/libengine/
emerald-0.9.5/libengine/Makefile.am
emerald-0.9.5/libengine/emerald.c
emerald-0.9.5/libengine/emeraldengine.pc.in
emerald-0.9.5/libengine/themer.c
emerald-0.9.5/misc/
emerald-0.9.5/misc/Makefile.am
emerald-0.9.5/misc/application-x-emerald-theme.png
emerald-0.9.5/misc/emerald-theme-manager.desktop
emerald-0.9.5/misc/emerald.mime
emerald-0.9.5/misc/emerald.xml
emerald-0.9.5/pixmaps/
emerald-0.9.5/pixmaps/Makefile.am
emerald-0.9.5/pixmaps/emerald-theme-manager-icon.png
emerald-0.9.5/po/
emerald-0.9.5/po/ChangeLog
emerald-0.9.5/po/LINGUAS
emerald-0.9.5/po/Makevars
emerald-0.9.5/po/POTFILES.in
emerald-0.9.5/po/ar.po
emerald-0.9.5/po/as.po
emerald-0.9.5/po/be.po
emerald-0.9.5/po/bn.po
emerald-0.9.5/po/bn_IN.po
emerald-0.9.5/po/ca.po
emerald-0.9.5/po/cs.po
emerald-0.9.5/po/da.po
emerald-0.9.5/po/de.po
emerald-0.9.5/po/el.po
emerald-0.9.5/po/en_GB.po
emerald-0.9.5/po/es.po
emerald-0.9.5/po/es_AR.po
emerald-0.9.5/po/eu.po
emerald-0.9.5/po/fa.po
emerald-0.9.5/po/fi.po
emerald-0.9.5/po/fr.po
emerald-0.9.5/po/gl.po
emerald-0.9.5/po/gu.po
emerald-0.9.5/po/he.po
emerald-0.9.5/po/hi.po
emerald-0.9.5/po/hr.po
emerald-0.9.5/po/hu.po
emerald-0.9.5/po/it.po
emerald-0.9.5/po/ja.po
emerald-0.9.5/po/ko.po
emerald-0.9.5/po/ml_IN.po
emerald-0.9.5/po/nb.po
emerald-0.9.5/po/nl.po
emerald-0.9.5/po/or.po
emerald-0.9.5/po/pa.po
emerald-0.9.5/po/pl.po
emerald-0.9.5/po/pt.po
emerald-0.9.5/po/pt_BR.po
emerald-0.9.5/po/ru.po
emerald-0.9.5/po/sk.po
emerald-0.9.5/po/sv.po
emerald-0.9.5/po/tr.po
emerald-0.9.5/po/zh_CN.po
emerald-0.9.5/po/zh_HK.po
emerald-0.9.5/po/zh_TW.po
emerald-0.9.5/src/
emerald-0.9.5/src/Makefile.am
emerald-0.9.5/src/engine_loader.c
emerald-0.9.5/src/main.c
emerald-0.9.5/themer/
emerald-0.9.5/themer/Makefile.am
emerald-0.9.5/themer/main.c
kaos@kaos-Aspire-5755G:~$ cd emerald-0.9.5
kaos@kaos-Aspire-5755G:~/emerald-0.9.5$ ./autogen.sh
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal
configure.ac:16: warning: macro `AM_GLIB_GNU_GETTEXT' not found in library
autoreconf: configure.ac: tracing
autoreconf: running: libtoolize --install --copy
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./config.guess'
libtoolize: copying file `./config.sub'
libtoolize: copying file `./install-sh'
libtoolize: copying file `./ltmain.sh'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
configure.ac:16: warning: macro `AM_GLIB_GNU_GETTEXT' not found in library
autoreconf: running: /usr/bin/autoconf
configure.ac:16: error: possibly undefined macro: AM_GLIB_GNU_GETTEXT
      If this token and others are legitimate, please use m4_pattern_allow.
      See the Autoconf documentation.
autoreconf: /usr/bin/autoconf failed with exit status: 1
kaos@kaos-Aspire-5755G:~/emerald-0.9.5$ make clean
make: *** Hedef `clean' i derlemek için  hiçbir kural yok. Durdu.
kaos@kaos-Aspire-5755G:~/emerald-0.9.5$


[alquirel]

Kod Seç Genişlet


kaos@kaos-Aspire-5755G:~/emerald-0.9.5$ make clean
make: *** Hedef `clean' i derlemek için  hiçbir kural yok. Durdu.
kaos@kaos-Aspire-5755G:~/emerald-0.9.5$


make clean değil de sadece make komutunu kullansan?

[kaosfeyk]

Kod Seç Genişlet

kaos@kaos-Aspire-5755G:~/emerald-0.9.5$ make
make: *** Hedefler belirtilmediğinden make dosyası yok. Durdu.
kaos@kaos-Aspire-5755G:~/emerald-0.9.5$



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 07 Ocak 2013 - 22:59:45

Kod Seç Genişlet

Installation Instructions
*************************

Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
Software Foundation, Inc.

This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.

Basic Installation
==================

These are generic installation instructions.

   The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation.  It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions.  Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, and a
file `config.log' containing compiler output (useful mainly for
debugging `configure').

   It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
the results of its tests to speed up reconfiguring.  (Caching is
disabled by default to prevent problems with accidental use of stale
cache files.)

   If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release.  If you are using the cache, and at
some point `config.cache' contains results you don't want to keep, you
may remove or edit it.

   The file `configure.ac' (or `configure.in') is used to create
`configure' by a program called `autoconf'.  You only need
`configure.ac' if you want to change it or regenerate `configure' using
a newer version of `autoconf'.

The simplest way to compile this package is:

  1. `cd' to the directory containing the package's source code and type
     `./configure' to configure the package for your system.  If you're
     using `csh' on an old version of System V, you might need to type
     `sh ./configure' instead to prevent `csh' from trying to execute
     `configure' itself.

     Running `configure' takes awhile.  While running, it prints some
     messages telling which features it is checking for.

  2. Type `make' to compile the package.

  3. Optionally, type `make check' to run any self-tests that come with
     the package.

  4. Type `make install' to install the programs and any data files and
     documentation.

  5. You can remove the program binaries and object files from the
     source code directory by typing `make clean'.  To also remove the
     files that `configure' created (so you can compile the package for
     a different kind of computer), type `make distclean'.  There is
     also a `make maintainer-clean' target, but that is intended mainly
     for the package's developers.  If you use it, you may have to get
     all sorts of other programs in order to regenerate files that came
     with the distribution.

Compilers and Options
=====================

Some systems require unusual options for compilation or linking that the
`configure' script does not know about.  Run `./configure --help' for
details on some of the pertinent environment variables.

   You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment.  Here
is an example:

     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix

   *Note Defining Variables::, for more details.

Compiling For Multiple Architectures
====================================

You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory.  To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'.  `cd' to the
directory where you want the object files and executables to go and run
the `configure' script.  `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.

   If you have to use a `make' that does not support the `VPATH'
variable, you have to compile the package for one architecture at a
time in the source code directory.  After you have installed the
package for one architecture, use `make distclean' before reconfiguring
for another architecture.

Installation Names
==================

By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc.  You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX'.

   You can specify separate installation prefixes for
architecture-specific files and architecture-independent files.  If you
pass the option `--exec-prefix=PREFIX' to `configure', the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.

   In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files.  Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.

   If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.

Optional Features
=================

Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System).  The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.

   For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.

Specifying the System Type
==========================

There may be some features `configure' cannot figure out automatically,
but needs to determine by the type of machine the package will run on.
Usually, assuming the package is built to be run on the _same_
architectures, `configure' can figure that out, but if it prints a
message saying it cannot guess the machine type, give it the
`--build=TYPE' option.  TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:

     CPU-COMPANY-SYSTEM

where SYSTEM can have one of these forms:

     OS KERNEL-OS

   See the file `config.sub' for the possible values of each field.  If
`config.sub' isn't included in this package, then this package doesn't
need to know the machine type.

   If you are _building_ compiler tools for cross-compiling, you should
use the option `--target=TYPE' to select the type of system they will
produce code for.

   If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with `--host=TYPE'.

Sharing Defaults
================

If you want to set default values for `configure' scripts to share, you
can create a site shell script called `config.site' that gives default
values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists.  Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.

Defining Variables
==================

Variables not defined in a site shell script can be set in the
environment passed to `configure'.  However, some packages may run
configure again during the build, and the customized values of these
variables may be lost.  In order to avoid this problem, you should set
them in the `configure' command line, using `VAR=value'.  For example:

     ./configure CC=/usr/local2/bin/gcc

causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script).  Here is a another example:

     /bin/bash ./configure CONFIG_SHELL=/bin/bash

Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
configuration-related scripts to be executed by `/bin/bash'.

`configure' Invocation
======================

`configure' recognizes the following options to control how it operates.

`--help'
`-h'
     Print a summary of the options to `configure', and exit.

`--version'
`-V'
     Print the version of Autoconf used to generate the `configure'
     script, and exit.

`--cache-file=FILE'
     Enable the cache: use and save the results of the tests in FILE,
     traditionally `config.cache'.  FILE defaults to `/dev/null' to
     disable caching.

`--config-cache'
`-C'
     Alias for `--cache-file=config.cache'.

`--quiet'
`--silent'
`-q'
     Do not print messages saying which checks are being made.  To
     suppress all normal output, redirect it to `/dev/null' (any error
     messages will still be shown).

`--srcdir=DIR'
     Look for the package's source code in directory DIR.  Usually
     `configure' can determine that directory automatically.

`configure' also accepts some other, not widely useful, options.  Run
`configure --help' for more details.

Install dosyası

[heartsmagic]

http://forum.ubuntu-tr.net/index.php?topic=179.0

Genelde: Önce configure, sonra make, ardından sudo make install'dur. Fakat Emerald için PPA'dan falan kurulum yok muydu? Sanki @decent paylaşmıştı bir ara?

PPA değilmiş, o da derlemeymiş: http://forum.ubuntu-tr.net/index.php?topic=34338.0

[kaosfeyk]

Kod Seç Genişlet

kaos@kaos-Aspire-5755G:~/emerald-0.9.5$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
/bin/bash: /home/kaos/emerald-0.9.5/missing: No such file or directory
configure: WARNING: `missing' script is too old or missing
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... none
checking for library containing strerror... none required
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) none
checking how to run the C preprocessor... gcc -E
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu format... func_convert_file_noop
checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... mt
checking if mt is a manifest tool... no
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for ANSI C header files... (cached) yes
./configure: line 12129: syntax error near unexpected token `0.35.0'
./configure: line 12129: `IT_PROG_INTLTOOL(0.35.0)'
kaos@kaos-Aspire-5755G:~/emerald-0.9.5$ make
make: *** Hedefler belirtilmediğinden make dosyası yok. Durdu.
kaos@kaos-Aspire-5755G:~/emerald-0.9.5$

önce configure sonra make denedim olmadı verdiğin linki inceliyorum.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 08 Ocak 2013 - 04:23:25
adımları uygulayınca çözüldü ikinci linkten takip edebilir arkadaşlar teşekkürler heartsmagic.