Pavilion g6 ~ Ubuntu 12.04 Çözünürlük Sorunu

[SKYLAB]

Merhabalar.

Ubuntu 10.04 'den 12.04 'e güncelleme yaptım ve sistem başlarken low graphic gibi bir şey diyor sonra sistem açılınca ekranın hepsi gözükmüyor vs.vs

Güncellemeden sonra oldu bu olay. Muhtemelen küçük bir update ile sorun halledilebilir ama bilmiyorum.

Ne yapmam gerekiyor ?


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 15 Ocak 2012 - 21:21:08
Gerçekten kusura bakmayın . Nvdia bölümüne açmışım , ATI ye taşınabilir mi ?

[if]

@SKYLAB, önemli değil, konuyu taşıdım:)

12.04'e mi yükselttiniz?

Kod Seç Genişlet

sudo apt-get install -f
lspci
cat /var/log/Xorg.0.log
cat /var/log/lightdm/x-0-greeter.log
cat /var/log/lightdm/x-0.log çıktılarına bakabilir miyim?

[SKYLAB]

Off gerçekten şuan sinirlerim çok çok bozuk..

12.04 olarak güncelleme yaptı ilk 2-3 açılışta 12.04 şeklinde gösteriyordu şimdi birden 11.10 demeye başladı.

Güncellemeyi yapmadan önce her şey çok iyiydi.

Şuanda ki sorunlarım ;

- ATI Ekran Kartını tanımıyor.
- Sistemin açılışı yaklaşık 1 dakika sürüyor. ( normalde 10 saniye falan sürerdi.)
- Ses kartı çalışmıyor.

sudo apt-get install -f :

Kod Seç Genişlet

Paket listeleri okunuyor... Bitti
Bağımlılık ağacı inşa ediliyor.       
Durum bilgisi okunuyor... Bitti       
Sıralanan paketler otomatik olarak kurulmuştu artık gerekli değiller:
  firefox-branding libgnome-desktop-2-17
Kaldırmak için 'apt-get autoremove' komutunu kullanın
Yükseltilen: 0, Yeni Kurulan: 0, Kaldırılacak: 0 ve Yükseltilmeyecek: 0.
N: Ignoring file 'opera.list.distUpgrade' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'google-chrome.list.distUpgrade' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'opera.list.save' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'prerequists-sources.list.distUpgrade' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'nikount-orta-desktop-lucid.list.save' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'nikount-orta-desktop-lucid.list.distUpgrade' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'google-chrome.list.save' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'opera.list.distUpgrade' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'google-chrome.list.distUpgrade' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'opera.list.save' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'prerequists-sources.list.distUpgrade' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'nikount-orta-desktop-lucid.list.save' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'nikount-orta-desktop-lucid.list.distUpgrade' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'google-chrome.list.save' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension


---
lspci :

Kod Seç Genişlet

00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx)
00:03.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 1)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 5)
00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
00:12.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:16.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS880M [Mobility Radeon HD 4200 Series]
01:05.1 Audio device: ATI Technologies Inc RS880 HDMI Audio [Radeon HD 4200 Series]
02:00.0 VGA compatible controller: ATI Technologies Inc Seymour [Radeon HD 6400M Series]
04:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
06:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01)


---
cat /var/log/Xorg.0.log :

Kod Seç Genişlet

[    32.108] (II) fglrx(0): First detailed timing is preferred mode
[    32.108] (II) fglrx(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[    32.108] (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    32.108] (II) fglrx(0): Manufacturer's mask: 0
[    32.108] (II) fglrx(0): Supported detailed timing:
[    32.108] (II) fglrx(0): clock: 69.3 MHz   Image Size:  344 x 193 mm
[    32.108] (II) fglrx(0): h_active: 1366  h_sync: 1398  h_sync_end 1422 h_blank_end 1432 h_border: 0
[    32.108] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 806 v_border: 0
[    32.108] (II) fglrx(0): Unknown vendor-specific block f
[    32.108] (II) fglrx(0):  AUO
[    32.108] (II) fglrx(0):  B156XW02 V2
[    32.108] (II) fglrx(0): EDID (in hex):
[    32.108] (II) fglrx(0): 00ffffffffffff0006afec2200000000
[    32.108] (II) fglrx(0): 01130103802213780ac8959e57549226
[    32.108] (II) fglrx(0): 0f505400000001010101010101010101
[    32.108] (II) fglrx(0): 010101010101121b5642500026302018
[    32.108] (II) fglrx(0): 340058c1100000180000000f00000000
[    32.108] (II) fglrx(0): 00000000000000000020000000fe0041
[    32.108] (II) fglrx(0): 554f0a202020202020202020000000fe
[    32.108] (II) fglrx(0): 004231353658573032205632200a00c0
[    32.108] (II) fglrx(0): EDID vendor "AUO", prod id 8940
[    32.108] (II) fglrx(0): Printing DDC gathered Modelines:
[    32.108] (II) fglrx(0): Modeline "1366x768"x0.0   69.30  1366 1398 1422 1432  768 771 775 806 -hsync -vsync (48.4 kHz)
[    32.109] (II) fglrx(0): Printing probed modes for output LVDS
[    32.109] (II) fglrx(0): Modeline "1366x768"x60.0   69.30  1366 1398 1422 1432  768 771 775 806 +hsync +vsync (48.4 kHz)
[    32.109] (II) fglrx(0): Modeline "1280x768"x60.0   69.30  1280 1398 1422 1432  768 771 775 806 +hsync +vsync (48.4 kHz)
[    32.109] (II) fglrx(0): Modeline "1280x720"x60.0   69.30  1280 1398 1422 1432  720 771 775 806 +hsync +vsync (48.4 kHz)
[    32.109] (II) fglrx(0): Modeline "1024x768"x60.0   69.30  1024 1398 1422 1432  768 771 775 806 +hsync +vsync (48.4 kHz)
[    32.109] (II) fglrx(0): Modeline "1280x600"x60.0   69.30  1280 1398 1422 1432  600 771 775 806 +hsync +vsync (48.4 kHz)
[    32.109] (II) fglrx(0): Modeline "1024x600"x60.0   69.30  1024 1398 1422 1432  600 771 775 806 +hsync +vsync (48.4 kHz)
[    32.109] (II) fglrx(0): Modeline "800x600"x60.0   69.30  800 1398 1422 1432  600 771 775 806 +hsync +vsync (48.4 kHz)
[    32.109] (II) fglrx(0): Modeline "800x480"x60.0   69.30  800 1398 1422 1432  480 771 775 806 +hsync +vsync (48.4 kHz)
[    32.109] (II) fglrx(0): Modeline "720x480"x60.0   69.30  720 1398 1422 1432  480 771 775 806 +hsync +vsync (48.4 kHz)
[    32.109] (II) fglrx(0): Modeline "640x480"x60.0   69.30  640 1398 1422 1432  480 771 775 806 +hsync +vsync (48.4 kHz)
[    32.109] (II) fglrx(0): EDID for output DFP1
[    32.109] (II) fglrx(0): EDID for output CRT1
[    32.109] (II) fglrx(0): Output LVDS connected
[    32.109] (II) fglrx(0): Output DFP1 disconnected
[    32.109] (II) fglrx(0): Output CRT1 disconnected
[    32.109] (II) fglrx(0): Using exact sizes for initial modes
[    32.109] (II) fglrx(0): Output LVDS using initial mode 1366x768
[    32.109] (II) fglrx(0): Display dimensions: (340, 190) mm
[    32.109] (II) fglrx(0): DPI set to (102, 102)
[    32.109] (II) fglrx(0): Adapter ATI Mobility Radeon HD 4200 Series has 2 configurable heads and 1 displays connected.
[    32.109] (==) fglrx(0):  PseudoColor visuals disabled
[    32.109] (II) Loading sub module "ramdac"
[    32.109] (II) LoadModule: "ramdac"
[    32.109] (II) Module "ramdac" already built-in
[    32.109] (==) fglrx(0): NoDRI = NO
[    32.109] (==) fglrx(0): Capabilities: 0x00000000
[    32.109] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    32.109] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    32.109] (==) fglrx(0): UseFastTLS=0
[    32.109] (==) fglrx(0): BlockSignalsOnLock=1
[    32.109] (--) Depth 24 pixmap format is 32 bpp
[    32.110] (II) Loading extension ATIFGLRXDRI
[    32.110] (II) fglrx(0): doing swlDriScreenInit
[    32.110] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    32.110] ukiDynamicMajor: found major device number 250
[    32.110] ukiDynamicMajor: found major device number 250
[    32.110] ukiDynamicMajor: found major device number 250
[    32.110] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[    32.110] ukiOpenDevice: node name is /dev/ati/card0
[    32.110] ukiOpenDevice: open result is 17, (OK)
[    32.110] ukiOpenByBusid: ukiOpenMinor returns 17
[    32.110] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[    32.110] ukiOpenDevice: node name is /dev/ati/card1
[    32.110] ukiOpenDevice: open result is 17, (OK)
[    32.110] ukiOpenByBusid: ukiOpenMinor returns 17
[    32.110] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    32.110] (II) fglrx(0): [uki] DRM interface version 1.0
[    32.110] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[    32.110] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    32.110] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb613f000
[    32.110] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    32.110] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    32.110] (II) fglrx(0): swlDriScreenInit done
[    32.110] (II) fglrx(0): Kernel Module Version Information:
[    32.110] (II) fglrx(0):     Name: fglrx
[    32.111] (II) fglrx(0):     Version: 8.91.4
[    32.111] (II) fglrx(0):     Date: Oct 25 2011
[    32.111] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[    32.111] (II) fglrx(0): Kernel Module version matches driver.
[    32.111] (II) fglrx(0): Kernel Module Build Time Information:
[    32.111] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.2.0-8-generic-pae
[    32.111] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    32.111] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[    32.111] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    32.111] (II) fglrx(0): [uki] register handle = 0x00004000
[    32.144] (II) fglrx(0): Static shadow buffer initialized.
[    32.146] (II) fglrx(0): DRI initialization successfull
[    32.146] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x009c4000
[    32.182] (==) fglrx(0): Backing store disabled
[    32.182] (II) Loading extension FGLRXEXTENSION
[    32.182] (==) fglrx(0): DPMS enabled
[    32.182] (II) fglrx(0): Initialized in-driver Xinerama extension
[    32.182] (**) fglrx(0): Textured Video is enabled.
[    32.182] (II) LoadModule: "glesx"
[    32.183] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/glesx.so
[    32.383] (II) Module glesx: vendor="X.Org Foundation"
[    32.383] compiled for 1.4.99.906, module version = 1.0.0
[    32.383] (II) Loading extension GLESX
[    32.383] (II) fglrx(0): GLESX enableFlags = 784
[    32.383] (II) fglrx(0): GLESX is enabled
[    32.383] (II) LoadModule: "amdxmm"
[    32.383] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/amdxmm.so
[    32.389] (II) Module amdxmm: vendor="X.Org Foundation"
[    32.389] compiled for 1.4.99.906, module version = 2.0.0
[    32.389] (II) Loading extension AMDXVOPL
[    32.389] (II) Loading extension AMDXVBA
[    32.389] [-     XMM_GLX] [I ]glesxXvInit Configureable RGBOutputColorRange
[    32.401] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[    32.404] (II) fglrx(0): Enable composite support successfully
[    32.404] (II) fglrx(0): X context handle = 0x1
[    32.404] (II) fglrx(0): [DRI] installation complete
[    32.404] (==) fglrx(0): Silken mouse enabled
[    32.405] (==) fglrx(0): Using HW cursor of display infrastructure!
[    32.405] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    32.406] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[    32.406] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[    32.408] (WW) fglrx(0): Unknown ConnectorType: 0!
[    33.011] (--) RandR disabled
[    33.011] (II) Initializing built-in extension Generic Event Extension
[    33.011] (II) Initializing built-in extension SHAPE
[    33.011] (II) Initializing built-in extension MIT-SHM
[    33.011] (II) Initializing built-in extension XInputExtension
[    33.011] (II) Initializing built-in extension XTEST
[    33.011] (II) Initializing built-in extension BIG-REQUESTS
[    33.011] (II) Initializing built-in extension SYNC
[    33.011] (II) Initializing built-in extension XKEYBOARD
[    33.011] (II) Initializing built-in extension XC-MISC
[    33.011] (II) Initializing built-in extension SECURITY
[    33.011] (II) Initializing built-in extension XINERAMA
[    33.011] (II) Initializing built-in extension XFIXES
[    33.011] (II) Initializing built-in extension RENDER
[    33.011] (II) Initializing built-in extension RANDR
[    33.011] (II) Initializing built-in extension COMPOSITE
[    33.011] (II) Initializing built-in extension DAMAGE
[    33.011] (II) Initializing built-in extension GESTURE
[    33.125] ukiDynamicMajor: found major device number 250
[    33.125] ukiDynamicMajor: found major device number 250
[    33.125] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[    33.125] ukiOpenDevice: node name is /dev/ati/card0
[    33.125] ukiOpenDevice: open result is 19, (OK)
[    33.125] ukiOpenByBusid: ukiOpenMinor returns 19
[    33.125] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[    33.125] ukiOpenDevice: node name is /dev/ati/card1
[    33.125] ukiOpenDevice: open result is 19, (OK)
[    33.126] ukiOpenByBusid: ukiOpenMinor returns 19
[    33.126] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    34.044] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    34.045] (II) fglrx(0): Enable the clock gating!
[    34.045] (II) fglrx(0): Setting screen physical size to 361 x 203
[    34.312] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    34.329] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    34.329] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    34.329] (II) LoadModule: "evdev"
[    34.358] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.441] (II) Module evdev: vendor="X.Org Foundation"
[    34.441] compiled for 1.10.2, module version = 2.6.0
[    34.441] Module class: X.Org XInput Driver
[    34.441] ABI class: X.Org XInput driver, version 12.3
[    34.441] (II) Using input driver 'evdev' for 'Power Button'
[    34.441] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.441] (**) Power Button: always reports core events
[    34.441] (**) Power Button: Device: "/dev/input/event2"
[    34.441] (--) Power Button: Found keys
[    34.441] (II) Power Button: Configuring as keyboard
[    34.441] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    34.441] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    34.441] (**) Option "xkb_rules" "evdev"
[    34.441] (**) Option "xkb_model" "pc105"
[    34.441] (**) Option "xkb_layout" "tr"
[    34.444] (II) XKB: reuse xkmfile /var/lib/xkb/server-609880D4F1521A95A29BCD7AB1227A69EC9A1B72.xkm
[    34.509] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    34.509] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    34.509] (II) Using input driver 'evdev' for 'Video Bus'
[    34.509] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.509] (**) Video Bus: always reports core events
[    34.509] (**) Video Bus: Device: "/dev/input/event4"
[    34.509] (--) Video Bus: Found keys
[    34.509] (II) Video Bus: Configuring as keyboard
[    34.509] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4/event4"
[    34.509] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    34.509] (**) Option "xkb_rules" "evdev"
[    34.509] (**) Option "xkb_model" "pc105"
[    34.509] (**) Option "xkb_layout" "tr"
[    34.510] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    34.510] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    34.510] (II) Using input driver 'evdev' for 'Video Bus'
[    34.510] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.510] (**) Video Bus: always reports core events
[    34.510] (**) Video Bus: Device: "/dev/input/event5"
[    34.510] (--) Video Bus: Found keys
[    34.510] (II) Video Bus: Configuring as keyboard
[    34.510] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/LNXVIDEO:02/input/input5/event5"
[    34.510] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    34.510] (**) Option "xkb_rules" "evdev"
[    34.510] (**) Option "xkb_model" "pc105"
[    34.510] (**) Option "xkb_layout" "tr"
[    34.515] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    34.515] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    34.515] (II) Using input driver 'evdev' for 'Power Button'
[    34.515] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.515] (**) Power Button: always reports core events
[    34.515] (**) Power Button: Device: "/dev/input/event0"
[    34.515] (--) Power Button: Found keys
[    34.515] (II) Power Button: Configuring as keyboard
[    34.515] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    34.515] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    34.515] (**) Option "xkb_rules" "evdev"
[    34.515] (**) Option "xkb_model" "pc105"
[    34.515] (**) Option "xkb_layout" "tr"
[    34.516] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    34.516] (II) No input driver/identifier specified (ignoring)
[    34.521] (II) config/udev: Adding input device HP Webcam-101 (/dev/input/event11)
[    34.521] (**) HP Webcam-101: Applying InputClass "evdev keyboard catchall"
[    34.521] (II) Using input driver 'evdev' for 'HP Webcam-101'
[    34.521] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.521] (**) HP Webcam-101: always reports core events
[    34.521] (**) HP Webcam-101: Device: "/dev/input/event11"
[    34.521] (--) HP Webcam-101: Found keys
[    34.521] (II) HP Webcam-101: Configuring as keyboard
[    34.521] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input11/event11"
[    34.521] (II) XINPUT: Adding extended input device "HP Webcam-101" (type: KEYBOARD)
[    34.521] (**) Option "xkb_rules" "evdev"
[    34.521] (**) Option "xkb_model" "pc105"
[    34.521] (**) Option "xkb_layout" "tr"
[    34.522] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event6)
[    34.522] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[    34.522] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[    34.522] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.522] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[    34.522] (**) Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event6"
[    34.522] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[    34.522] (II) Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[    34.522] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input6/event6"
[    34.522] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD)
[    34.522] (**) Option "xkb_rules" "evdev"
[    34.522] (**) Option "xkb_model" "pc105"
[    34.522] (**) Option "xkb_layout" "tr"
[    34.523] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event7)
[    34.523] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev pointer catchall"
[    34.523] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[    34.523] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[    34.523] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.523] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[    34.523] (**) Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event7"
[    34.523] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found 9 mouse buttons
[    34.523] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found scroll wheel(s)
[    34.524] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found relative axes
[    34.524] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found x and y relative axes
[    34.524] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found absolute axes
[    34.524] (II) evdev-grail: failed to open grail, no gesture support
[    34.524] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[    34.524] (II) Microsoft Microsoft® Nano Transceiver v2.0: Configuring as mouse
[    34.524] (II) Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[    34.524] (II) Microsoft Microsoft® Nano Transceiver v2.0: Adding scrollwheel support
[    34.524] (**) Microsoft Microsoft® Nano Transceiver v2.0: YAxisMapping: buttons 4 and 5
[    34.524] (**) Microsoft Microsoft® Nano Transceiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    34.524] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/input/input7/event7"
[    34.524] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD)
[    34.524] (**) Option "xkb_rules" "evdev"
[    34.524] (**) Option "xkb_model" "pc105"
[    34.524] (**) Option "xkb_layout" "tr"
[    34.524] (II) Microsoft Microsoft® Nano Transceiver v2.0: initialized for relative axes.
[    34.524] (WW) Microsoft Microsoft® Nano Transceiver v2.0: ignoring absolute axes.
[    34.524] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) keeping acceleration scheme 1
[    34.524] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration profile 0
[    34.524] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration factor: 2.000
[    34.524] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration threshold: 4
[    34.525] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/mouse0)
[    34.525] (II) No input driver/identifier specified (ignoring)
[    34.525] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event8)
[    34.525] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[    34.525] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[    34.525] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.525] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[    34.526] (**) Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event8"
[    34.526] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found 1 mouse buttons
[    34.526] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found scroll wheel(s)
[    34.526] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found relative axes
[    34.526] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found absolute axes
[    34.526] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found x and y absolute axes
[    34.526] (--) Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[    34.526] (II) Microsoft Microsoft® Nano Transceiver v2.0: Configuring as mouse
[    34.526] (II) Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[    34.526] (II) Microsoft Microsoft® Nano Transceiver v2.0: Adding scrollwheel support
[    34.526] (**) Microsoft Microsoft® Nano Transceiver v2.0: YAxisMapping: buttons 4 and 5
[    34.527] (**) Microsoft Microsoft® Nano Transceiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    34.527] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.2/input/input8/event8"
[    34.527] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD)
[    34.527] (**) Option "xkb_rules" "evdev"
[    34.527] (**) Option "xkb_model" "pc105"
[    34.527] (**) Option "xkb_layout" "tr"
[    34.527] (EE) Microsoft Microsoft® Nano Transceiver v2.0: failed to initialize for relative axes.
[    34.530] (WW) Touch X valuator does not match pointer X valuator, pointer emulation may be incorrect
[    34.530] (WW) Touch Y valuator does not match pointer Y valuator, pointer emulation may be incorrect
[    34.530] (II) Microsoft Microsoft® Nano Transceiver v2.0: initialized for absolute axes.
[    34.530] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) keeping acceleration scheme 1
[    34.530] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration profile 0
[    34.530] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration factor: 2.000
[    34.530] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration threshold: 4
[    34.530] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/js0)
[    34.530] (II) No input driver/identifier specified (ignoring)
[    34.531] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event12)
[    34.531] (II) No input driver/identifier specified (ignoring)
[    34.532] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event13)
[    34.532] (II) No input driver/identifier specified (ignoring)
[    34.534] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    34.534] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    34.534] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    34.534] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.534] (**) AT Translated Set 2 keyboard: always reports core events
[    34.534] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    34.534] (--) AT Translated Set 2 keyboard: Found keys
[    34.534] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    34.534] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    34.534] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    34.534] (**) Option "xkb_rules" "evdev"
[    34.534] (**) Option "xkb_model" "pc105"
[    34.534] (**) Option "xkb_layout" "tr"
[    34.535] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[    34.535] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    34.535] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    34.535] (II) LoadModule: "synaptics"
[    34.535] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    34.553] (II) Module synaptics: vendor="X.Org Foundation"
[    34.553] compiled for 1.10.4, module version = 1.4.1
[    34.553] Module class: X.Org XInput Driver
[    34.553] ABI class: X.Org XInput driver, version 12.3
[    34.553] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    34.553] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    34.553] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    34.553] (**) Option "Device" "/dev/input/event10"
[    34.553] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5634
[    34.553] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4598
[    34.553] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    34.553] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    34.553] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    34.564] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    34.564] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    34.564] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[    34.564] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[    34.564] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    34.564] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    34.564] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[    34.564] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    34.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    34.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    34.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    34.565] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    34.566] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    34.566] (II) No input driver/identifier specified (ignoring)
[    34.571] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
[    34.571] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    34.571] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    34.571] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.571] (**) HP WMI hotkeys: always reports core events
[    34.571] (**) HP WMI hotkeys: Device: "/dev/input/event9"
[    34.571] (--) HP WMI hotkeys: Found keys
[    34.571] (II) HP WMI hotkeys: Configuring as keyboard
[    34.571] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[    34.571] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
[    34.571] (**) Option "xkb_rules" "evdev"
[    34.571] (**) Option "xkb_model" "pc105"
[    34.571] (**) Option "xkb_layout" "tr"
[    34.615] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    62.568] (II) fglrx(0): EDID vendor "AUO", prod id 8940
[    62.568] (II) fglrx(0): Printing DDC gathered Modelines:
[    62.568] (II) fglrx(0): Modeline "1366x768"x0.0   69.30  1366 1398 1422 1432  768 771 775 806 -hsync -vsync (48.4 kHz)
[    73.414] (II) fglrx(0): EDID vendor "AUO", prod id 8940
[    73.414] (II) fglrx(0): Printing DDC gathered Modelines:
[    73.414] (II) fglrx(0): Modeline "1366x768"x0.0   69.30  1366 1398 1422 1432  768 771 775 806 -hsync -vsync (48.4 kHz)
[    89.458] (II) fglrx(0): EDID vendor "AUO", prod id 8940
[    89.458] (II) fglrx(0): Printing DDC gathered Modelines:
[    89.458] (II) fglrx(0): Modeline "1366x768"x0.0   69.30  1366 1398 1422 1432  768 771 775 806 -hsync -vsync (48.4 kHz)
[    91.897] (II) fglrx(0): EDID vendor "AUO", prod id 8940
[    91.897] (II) fglrx(0): Printing DDC gathered Modelines:
[    91.897] (II) fglrx(0): Modeline "1366x768"x0.0   69.30  1366 1398 1422 1432  768 771 775 806 -hsync -vsync (48.4 kHz)
[   121.980] (II) fglrx(0): EDID vendor "AUO", prod id 8940
[   121.980] (II) fglrx(0): Printing DDC gathered Modelines:
[   121.980] (II) fglrx(0): Modeline "1366x768"x0.0   69.30  1366 1398 1422 1432  768 771 775 806 -hsync -vsync (48.4 kHz)
[   127.814] (II) XKB: reuse xkmfile /var/lib/xkb/server-485FE24AF2C5E992DA3ED39FEDE14CFD833D2CD9.xkm
[   141.080] (II) fglrx(0): EDID vendor "AUO", prod id 8940
[   141.080] (II) fglrx(0): Printing DDC gathered Modelines:
[   141.080] (II) fglrx(0): Modeline "1366x768"x0.0   69.30  1366 1398 1422 1432  768 771 775 806 -hsync -vsync (48.4 kHz)
[   183.912] (II) XKB: reuse xkmfile /var/lib/xkb/server-485FE24AF2C5E992DA3ED39FEDE14CFD833D2CD9.xkm


---
cat /var/log/lightdm/x-0-greeter.log :

Kod Seç Genişlet

[+0,00s] DEBUG: unity-greeter.vala:583: Starting unity-greeter 0.1.1 UID=115 LANG=tr_TR.utf8
[+0,00s] DEBUG: unity-greeter.vala:586: Setting cursor
[+0,07s] DEBUG: unity-greeter.vala:590: Creating background surface
[+0,11s] DEBUG: unity-greeter.vala:593: Loading command line options
[+0,11s] DEBUG: unity-greeter.vala:620: Loading configuration from /etc/lightdm/unity-greeter.conf
[+0,14s] DEBUG: unity-greeter.vala:633: Setting GTK+ settings
[+1,31s] DEBUG: unity-greeter.vala:657: Creating Unity Greeter
[+1,31s] DEBUG: Connecting to display manager...
[+1,31s] DEBUG: Wrote 17 bytes to daemon
[+1,31s] DEBUG: Read 8 bytes from daemon
[+1,32s] DEBUG: Read 90 bytes from daemon
[+1,32s] DEBUG: Connected version=1.0.6 default-session=ubuntu hide-users=false has-guest-account=true
[+1,59s] DEBUG: unity-greeter.vala:187: Monitor is 1366x768 pixels at 0,0
[+6,16s] DEBUG: user-list.vala:529: LANG=tr_TR.utf8 LANGUAGE=(null)
[+6,73s] CRITICAL: g_error_free: assertion `error != NULL' failed
[+6,80s] DEBUG: get entries
[+6,80s] DEBUG: user-list.vala:718: Adding indicator object 0x86bc988 at position 0
[+6,94s] DEBUG: Evaluating bitmask for '%H:%M'
[+6,94s] DEBUG: Checking against 1 possible times
[+6,94s] DEBUG: Guessing max time width: 36
[+7,00s] DEBUG: get entries
[+7,00s] DEBUG: user-list.vala:718: Adding indicator object 0x85dd364 at position 1
[+7,02s] WARNING: IndicatorObject class does not have an accessible description.
[+7,02s] DEBUG: get entries
[+7,02s] DEBUG: get entries
[+7,02s] DEBUG: user-list.vala:718: Adding indicator object 0x8649e0c at position 2
[+7,34s] WARNING: IndicatorObject class does not have an accessible description.
[+7,34s] DEBUG: get entries
[+7,34s] DEBUG: get entries
[+7,34s] DEBUG: get entries
[+7,34s] DEBUG: user-list.vala:718: Adding indicator object 0x86a9d04 at position 3
[+7,34s] DEBUG: user-list.vala:543: LANG=tr_TR.utf8 LANGUAGE=(null)
[+7,34s] DEBUG: user-list.vala:439: Using logo /usr/share/unity-greeter/logo.png
[+7,38s] DEBUG: Loaded session /usr/share/xsessions/xterm.desktop (Recovery Console, Failsafe session with only xterm)
[+7,40s] DEBUG: Ignoring session /usr/share/xsessions/gnome.desktop
[+7,54s] DEBUG: Loaded session /usr/share/xsessions/ubuntu-2d.desktop (Ubuntu 2D, This session logs you into Ubuntu 2D Mode)
[+7,62s] DEBUG: Loaded session /usr/share/xsessions/ubuntu.desktop (Ubuntu, Bu oturum, Ubuntu'ya bağlar)
[+7,64s] DEBUG: Loaded session /usr/share/xsessions/xsession.desktop (User Defined Session, Custom ~/.xsession script)
[+7,75s] DEBUG: Ignoring session /usr/share/xsessions/gnome-shell.desktop
[+7,75s] DEBUG: unity-greeter.vala:130: Adding session xterm (Recovery Console)
[+7,83s] DEBUG: unity-greeter.vala:130: Adding session ubuntu (Ubuntu)
[+7,83s] DEBUG: unity-greeter.vala:130: Adding session ubuntu-2d (Ubuntu 2D)
[+7,83s] DEBUG: unity-greeter.vala:130: Adding session xsession (User Defined Session)
[+7,84s] DEBUG: Loading users from org.freedesktop.Accounts
[+7,84s] DEBUG: Loading user /org/freedesktop/Accounts/User1000
[+7,86s] DEBUG: Loading sessions from org.freedesktop.DisplayManager
[+7,86s] DEBUG: unity-greeter.vala:195: Adding/updating user cagatay (Çağatay )
[+7,86s] DEBUG: unity-greeter.vala:163: Adding guest account entry
[+7,86s] DEBUG: unity-greeter.vala:167: Adding other entry
[+8,06s] DEBUG: unity-greeter.vala:359: Start authentication cagatay
[+8,06s] DEBUG: Starting authentication for user cagatay...
[+8,06s] DEBUG: Wrote 23 bytes to daemon
[+8,17s] DEBUG: unity-greeter.vala:660: Showing greeter
[+8,17s] DEBUG: unity-greeter.vala:211: Showing main window
[+8,17s] DEBUG: user-list.vala:926: Change background
[+8,17s] DEBUG: New style for time label
[+8,17s] DEBUG: Evaluating bitmask for '%H:%M'
[+8,17s] DEBUG: Checking against 1 possible times
[+8,17s] DEBUG: Guessing max time width: 36
[+8,17s] DEBUG: New style for time label
[+8,17s] DEBUG: Evaluating bitmask for '%H:%M'
[+8,17s] DEBUG: Checking against 1 possible times
[+8,17s] DEBUG: Guessing max time width: 36
[+8,44s] DEBUG: unity-greeter.vala:673: Starting main loop
[+8,44s] DEBUG: Read 8 bytes from daemon
[+8,44s] DEBUG: Read 37 bytes from daemon
[+8,44s] DEBUG: Prompt user with 1 message(s)
[+8,63s] DEBUG: user-list.vala:1216: Rendered first frame
[+8,63s] DEBUG: user-list.vala:158: Making background /usr/share/backgrounds/warty-final-ubuntu.png at 1366x768
[+8,67s] DEBUG: Num devices: '2'

[+8,67s] DEBUG: get_primary_device: got data from object /org/freedesktop/UPower/devices/line_power_ACAD
[+8,67s] DEBUG: get_primary_device: got data from object /org/freedesktop/UPower/devices/battery_BAT0
[+8,67s] DEBUG: put_primary_device: got data from object /org/freedesktop/UPower/devices/battery_BAT0
[+8,93s] DEBUG: Num devices: '2'

[+8,93s] DEBUG: menu_add_device: got data from object /org/freedesktop/UPower/devices/line_power_ACAD
[+8,93s] DEBUG: menu_add_device: got data from object /org/freedesktop/UPower/devices/battery_BAT0
[+8,93s] DEBUG: user-list.vala:1204: Drew 2 frames in 2,8 seconds (0,703328 fps)
[+9,05s] DEBUG: user-list.vala:174: Render of background /usr/share/backgrounds/warty-final-ubuntu.png at 1366x768 complete
[+9,05s] DEBUG: user-list.vala:1179: Start background animation
[+9,06s] DEBUG: user-list.vala:910: Stop background animation
[+9,06s] WARNING: Getting layout failed: GDBus.Error:org.freedesktop.DBus.Error.UnknownMethod: /com/canonical/indicator/users/menu yolundaki nesnede `com.canonical.dbusmenu' gibi bir arabirim yok
[+9,16s] DEBUG: user-list.vala:1204: Drew 2 frames in 0,1 seconds (17,031133 fps)
[+9,53s] DEBUG: user-list.vala:1204: Drew 1 frames in 0,1 seconds (9,966910 fps)
[+9,84s] DEBUG: notify visible signal received
[+9,84s] CRITICAL: ido_calendar_menu_item_set_date: assertion `IDO_IS_CALENDAR_MENU_ITEM(menuitem)' failed
[+9,85s] DEBUG: New calendar item
[+9,93s] DEBUG: user-list.vala:1204: Drew 1 frames in 0,1 seconds (9,910803 fps)
[+9,98s] DEBUG: indicator-sound: new_volume_slider_widget
[+9,98s] DEBUG: indicator-sound: new_voip_slider_widget
[+10,73s] DEBUG: user-list.vala:1204: Drew 1 frames in 0,1 seconds (9,899814 fps)
[+11,13s] DEBUG: user-list.vala:1204: Drew 1 frames in 0,1 seconds (9,902559 fps)
[+12,04s] DEBUG: user-list.vala:1204: Drew 4 frames in 0,2 seconds (19,248074 fps)
[+13,01s] DEBUG: user-list.vala:1204: Drew 25 frames in 0,8 seconds (31,702192 fps)
[+16,40s] DEBUG: user-list.vala:1204: Drew 2 frames in 0,1 seconds (19,533158 fps)
[+16,66s] DEBUG: user-list.vala:963: Select *other
[+16,74s] DEBUG: unity-greeter.vala:359: Start authentication *other
[+16,74s] DEBUG: Starting authentication for user (null)...
[+16,74s] DEBUG: Wrote 16 bytes to daemon
[+16,74s] DEBUG: user-list.vala:977: Start scroll animation
[+16,75s] DEBUG: Read 8 bytes from daemon
[+16,75s] DEBUG: Read 26 bytes from daemon
[+16,75s] DEBUG: Prompt user with 1 message(s)
[+16,95s] DEBUG: user-list.vala:892: Stop scroll animation
[+16,99s] DEBUG: user-list.vala:963: Select *guest
[+17,10s] DEBUG: unity-greeter.vala:359: Start authentication *guest
[+17,10s] DEBUG: Starting authentication for guest account...
[+17,10s] DEBUG: Wrote 12 bytes to daemon
[+17,10s] DEBUG: user-list.vala:977: Start scroll animation
[+17,10s] DEBUG: user-list.vala:1204: Drew 10 frames in 0,4 seconds (28,121801 fps)
[+17,11s] DEBUG: Read 8 bytes from daemon
[+17,11s] DEBUG: Read 12 bytes from daemon
[+17,11s] DEBUG: Authentication complete for user  with return code 0
[+17,32s] DEBUG: user-list.vala:892: Stop scroll animation
[+17,42s] DEBUG: user-list.vala:1204: Drew 10 frames in 0,3 seconds (30,696409 fps)
[+17,95s] DEBUG: user-list.vala:963: Select cagatay
[+18,04s] DEBUG: unity-greeter.vala:359: Start authentication cagatay
[+18,04s] DEBUG: Starting authentication for user cagatay...
[+18,04s] DEBUG: Wrote 23 bytes to daemon
[+18,04s] DEBUG: user-list.vala:977: Start scroll animation
[+18,05s] DEBUG: Read 8 bytes from daemon
[+18,05s] DEBUG: Read 37 bytes from daemon
[+18,05s] DEBUG: Prompt user with 1 message(s)
[+18,25s] DEBUG: user-list.vala:892: Stop scroll animation
[+18,35s] DEBUG: user-list.vala:1204: Drew 10 frames in 0,3 seconds (32,280244 fps)
[+18,96s] DEBUG: user-list.vala:1204: Drew 1 frames in 0,1 seconds (9,900402 fps)
[+19,36s] DEBUG: user-list.vala:1204: Drew 1 frames in 0,1 seconds (9,917191 fps)
[+19,75s] DEBUG: user-list.vala:1204: Drew 3 frames in 0,1 seconds (22,275188 fps)
[+20,16s] DEBUG: user-list.vala:1204: Drew 1 frames in 0,1 seconds (9,901088 fps)
[+20,70s] DEBUG: user-list.vala:1204: Drew 3 frames in 0,2 seconds (12,371593 fps)
[+20,83s] DEBUG: user-list.vala:1204: Drew 1 frames in 0,1 seconds (9,898050 fps)
[+20,99s] DEBUG: user-list.vala:1204: Drew 1 frames in 0,1 seconds (9,898344 fps)
[+21,11s] DEBUG: user-list.vala:1204: Drew 1 frames in 0,1 seconds (9,889436 fps)
[+21,23s] DEBUG: user-list.vala:1204: Drew 1 frames in 0,1 seconds (9,897952 fps)
[+21,34s] DEBUG: user-list.vala:1204: Drew 1 frames in 0,1 seconds (9,895993 fps)
[+21,56s] DEBUG: user-list.vala:1204: Drew 2 frames in 0,2 seconds (10,035626 fps)
[+21,71s] DEBUG: user-list.vala:1204: Drew 1 frames in 0,1 seconds (9,896385 fps)
[+21,90s] DEBUG: user-list.vala:1204: Drew 1 frames in 0,1 seconds (9,896679 fps)
[+22,10s] DEBUG: user-list.vala:1204: Drew 2 frames in 0,2 seconds (11,290823 fps)
[+22,31s] DEBUG: user-list.vala:1204: Drew 1 frames in 0,1 seconds (9,893154 fps)
[+22,65s] DEBUG: user-list.vala:1204: Drew 1 frames in 0,1 seconds (9,894133 fps)
[+23,85s] DEBUG: user-list.vala:1204: Drew 1 frames in 0,1 seconds (9,898050 fps)
[+24,25s] DEBUG: user-list.vala:1204: Drew 1 frames in 0,1 seconds (9,894035 fps)
[+25,05s] DEBUG: user-list.vala:1204: Drew 1 frames in 0,1 seconds (9,898638 fps)
[+25,13s] DEBUG: Providing response to display manager
[+25,13s] DEBUG: Wrote 31 bytes to daemon
[+25,19s] DEBUG: Read 8 bytes from daemon
[+25,19s] DEBUG: Read 19 bytes from daemon
[+25,19s] DEBUG: Authentication complete for user cagatay with return code 0
[+25,21s] DEBUG: Starting session ubuntu
[+25,21s] DEBUG: Wrote 18 bytes to daemon


---
cat /var/log/lightdm/x-0.log

Kod Seç Genişlet

X.Org X Server 1.10.4
Release Date: 2011-08-19
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
Current Operating System: Linux zkylab 3.2.0-8-generic-pae #15-Ubuntu SMP Wed Jan 11 15:34:57 UTC 2012 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-8-generic-pae root=UUID=aa19a95b-c09f-40a2-a2e5-52cb8db36685 ro quiet splash vt.handoff=7
Build Date: 09 December 2011  11:38:39AM
xorg-server 2:1.10.4-1ubuntu6 (For technical support please see http://www.ubuntu.com/support)
Current version of pixman: 0.24.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 15 22:09:19 2012
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:1) found
[-     XMM_GLX] [I ]glesxXvInit Configureable RGBOutputColorRange
(EE) Microsoft Microsoft® Nano Transceiver v2.0: failed to initialize for relative axes.


---

of gerçekten yardımcı olursanız çok mutlu olurum keşke güncelleme yapmasaydım of

[if]

@SKYLAB, 12.04 henüz alfa 1 aşamasında, işe bir de eklediğiniz ek yazılım kaynaklarını ekleyince bir şeylerin ters gitmesine pek şaşmamak gerek. İnşallah çözeriz. Önce ek yazılım kaynaklarını kapatın, "Ignoring..." hatısı için forumda anlatım var, oradan çözebilirsiniz.

Ek Donanımlar kısmından ATI'yi etkinleştirdiniz mi?

Kod Seç Genişlet

sudo do-release-upgrade
dpkg -l | grep fglrx
sudo find / -name fglrx-uninstall.sh  çıktılarına bakabilir miyim?

[SKYLAB]

ek sürücüleri etkinleştirmeye çalıştırırken jockey ile ilgili hata alıyorum.

sudo do-release-upgrade

Kod Seç Genişlet

Yeni sürüm bulunamadı

dpkg -l | grep fglrx

Kod Seç Genişlet

pc  fglrx                                         2:8.911-0ubuntu1                                Video driver for the AMD graphics accelerators


sudo find / -name fglrx-uninstall.sh

Kod Seç Genişlet


/usr/share/ati/fglrx-uninstall.sh

[if]

@SKYLAB, http://forum.ubuntu-tr.net/index.php?topic=30785.0 bağlantısından 3.2.0 başlığında anlatılanları uyguladıktan sonra ekran düzeliyor mu? O komutlara ek olarak

Kod Seç Genişlet

sudo apt-get autoremove komutunu yürütün önce. fglrx paketi silinmiş ama ayar dosyaları kalmış görünüşe göre.

[heartsmagic]

@SKYLAB, biliyorum pişmansın ancak alfa sürüme geçişten sonra pişmanlık fayda etmiyor ne yazık ki. İki seçeneğin var şu an:

1. Sıfırdan 11.10 kuracaksın.
2. Alfa üzerinden böyle devam edeceksin. Bizim çözebileceğimiz şeyler olacağı gibi çözemeyeceklerimiz de çıkacaktır. Çünkü çözüm bizlerde olmuyor her zaman, alfa/beta sürümlerde mesele geliştiricilere, depolara, uygulamalara kadar gidiyor. Alfa/beta kullanıcısı bunları göze alarak kullanır sistemi ve genelde de sorunları kendi çözebilecek durumdadır.

Kod Seç Genişlet

sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade komutlarını yürüt. Ayrıca sources.list üzerinde sürüm denetimi yap, oneiric geçmiyor olması lazım orada.

Not: Konumuzu da Alfa/Beta/RC bölümüne taşıyalım, daha uygun bu tür sorular için.