[Çözüldü] Açılışta ve kapanışta hata problemi

[gokhanyildiz]

daha öncede bu konuyu açmıştım ama konuya cevap yazıldıktan sonra silinmiş.kapanırken network manager hatası alıyorum ve açılırken de bazı testler yapıyor [ok] şeklinde onaylıyor.bir sürü test yapıyor.Açılırken ve kapanırken bootsplash görünmüyordu fakat forumda arama yaptım ve bulduğum konulardan yararlanarak kapanırken çıkan bootsplash ekranını getirdim.Fakat şöyle bir sorun var ki bootsplash bir müddet donuyor ondan sonra network manager hatası veren yazılar ekranı dolduruyor tekrar bootsplash ekranı çıkıyor ve yükleme çubuğu dolup bilgisayar kapanıyor.Bu sorunu nasıl çözebilirim.

[erginemr]

Bu, Hardy Heron'dan kalma, önemsiz bir hata. Sanırım Hardy kullanıyorsunuz:
http://forum.ubuntu-tr.net/index.php/topic,1043.msg10510.html#msg10510
http://forum.ubuntu-tr.net/index.php/topic,1027.msg28531.html#msg28531

[gokhanyildiz]

aynı işlemleri 50 defa yaptım sorun düzelmedi...

[ebubekirs]

Bu bir sorun değil, bende ilk yüklediğim günden beri hep o şekilde kapanıyor. Çözümler, sadece orada çıkan yazıların gözükmemesi yönünde, hata çözülmüş olmuyor.

[gokhanyildiz]

fakat ilk kurduğuma göre açılış biraz daha uzun sürüyor.

[gokhanyildiz]

cevap yok mu?

[heartsmagic]

Sistemin güncel mi? Güncellemeleri takip ediyor musun?

[gokhanyildiz]

evet sürekli güncelliyorum. 8.04 hardy kullanıyorum. kapanırken mn_signal veya signup tarzı bir hata veriyor.açılırken testler yapıyor [ok] şeklinde onay veriyor.bazen pc kapanmıyor $gokhan-pc login: şeklinde yazıda kalıyor.Açılış ve kapanış baya uzamaya başladı.

[heartsmagic]

Son hata iletilerini buraya geçmen mümkün mü?

[gokhanyildiz]

konsoldan herhangi bir komutla alabiliyormuyuz bu çıktıyı yoksa fotograf mı cekeyim?

[heartsmagic]

dmesg beki fayda verir ancak arada kaçanların olma ihtimali var.

Kod Seç Genişlet

dmesg > dmesg_çıktısı komutu ile çıktıyı aktar ve dmesg_çıktısı dosyasının içeriğini buraya geç, arada süreyi uzatan hataları da göstermeye çalış.

Eğer resim imkânın varsa o da güzel olabilir.

[gokhanyildiz]

Kod Seç Genişlet

[   12.988516] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[   12.988521] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   12.988538] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[   12.988543] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   12.988559] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[   12.988564] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   12.988580] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[   12.988584] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   12.988601] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
[   12.988605] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[   12.988615] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   12.988624] NET: Registered protocol family 2
[   13.025954] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   13.026145] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   13.026525] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   13.026725] TCP: Hash tables configured (established 131072 bind 65536)
[   13.026727] TCP reno registered
[   13.038010] checking if image is initramfs... it is
[   13.931959] Freeing initrd memory: 15241k freed
[   13.932106] Simple Boot Flag at 0x52 set to 0x1
[   13.932645] audit: initializing netlink socket (disabled)
[   13.932658] audit(1236285122.776:1): initialized
[   13.932810] highmem bounce pool size: 64 pages
[   13.934425] VFS: Disk quotas dquot_6.5.1
[   13.934488] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   13.934603] io scheduler noop registered
[   13.934605] io scheduler anticipatory registered
[   13.934607] io scheduler deadline registered
[   13.934616] io scheduler cfq registered (default)
[   14.125714] Boot video device is 0000:01:00.0
[   14.125814] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   14.125849] assign_interrupt_mode Found MSI capability
[   14.125878] Allocate Port Service[0000:00:01.0:pcie00]
[   14.125904] Allocate Port Service[0000:00:01.0:pcie02]
[   14.125970] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   14.126008] assign_interrupt_mode Found MSI capability
[   14.126040] Allocate Port Service[0000:00:1c.0:pcie00]
[   14.126115] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   14.126154] assign_interrupt_mode Found MSI capability
[   14.126185] Allocate Port Service[0000:00:1c.1:pcie00]
[   14.126257] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   14.126296] assign_interrupt_mode Found MSI capability
[   14.126327] Allocate Port Service[0000:00:1c.2:pcie00]
[   14.126402] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   14.126440] assign_interrupt_mode Found MSI capability
[   14.126471] Allocate Port Service[0000:00:1c.3:pcie00]
[   14.126542] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   14.126582] assign_interrupt_mode Found MSI capability
[   14.126613] Allocate Port Service[0000:00:1c.4:pcie00]
[   14.126637] Allocate Port Service[0000:00:1c.4:pcie02]
[   14.126708] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[   14.126748] assign_interrupt_mode Found MSI capability
[   14.126779] Allocate Port Service[0000:00:1c.5:pcie00]
[   14.126804] Allocate Port Service[0000:00:1c.5:pcie02]
[   14.127004] isapnp: Scanning for PnP cards...
[   14.480098] isapnp: No Plug & Play device found
[   14.500074] Real Time Clock Driver v1.12ac
[   14.500329] hpet_resources: 0xfed00000 is busy
[   14.500374] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   14.501392] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   14.501446] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   14.501527] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   14.503454] i8042.c: Detected active multiplexing controller, rev 1.1.
[   14.504241] serio: i8042 KBD port at 0x60,0x64 irq 1
[   14.504244] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   14.504247] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   14.504249] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   14.504251] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   14.528169] mice: PS/2 mouse device common for all mice
[   14.528260] EISA: Probing bus 0 at eisa.0
[   14.528284] Cannot allocate resource for EISA slot 8
[   14.528286] EISA: Detected 0 cards.
[   14.528288] cpuidle: using governor ladder
[   14.528289] cpuidle: using governor menu
[   14.528360] NET: Registered protocol family 1
[   14.528386] Using IPI No-Shortcut mode
[   14.528413] registered taskstats version 1
[   14.528526]   Magic number: 1:954:547
[   14.528592] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   14.528593] EDD information not available.
[   14.528773] Freeing unused kernel memory: 368k freed
[   14.528793] Write protecting the kernel read-only data: 806k
[   14.560343] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   15.702497] fuse init (API version 7.9)
[   15.718404] ACPI: SSDT 3FFB63A0, 0286 (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
[   15.718668] ACPI: SSDT 3FFB66C0, 0712 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
[   15.719627] Monitor-Mwait will be used to enter C-1 state
[   15.719630] Monitor-Mwait will be used to enter C-2 state
[   15.719711] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   15.719714] ACPI: Processor [P001] (supports 8 throttling states)
[   15.719923] ACPI: SSDT 3FFB62D0, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20051117)
[   15.720170] ACPI: SSDT 3FFB6630, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20051117)
[   15.721277] ACPI: CPU1 (power states: C1[C1] C2[C2])
[   15.721282] ACPI: Processor [P002] (supports 8 throttling states)
[   15.722372] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   15.724415] ACPI: Thermal Zone [THRM] (42 C)
[   15.968165] usbcore: registered new interface driver usbfs
[   15.968186] usbcore: registered new interface driver hub
[   15.975430] usbcore: registered new device driver usb
[   15.976100] SCSI subsystem initialized
[   15.983190] USB Universal Host Controller Interface driver v3.0
[   15.983238] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[   15.983249] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[   15.983253] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   15.983568] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[   15.983602] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e080
[   15.983728] usb usb1: configuration #1 chosen from 1 choice
[   15.983750] hub 1-0:1.0: USB hub found
[   15.983754] hub 1-0:1.0: 2 ports detected
[   15.991147] libata version 3.00 loaded.
[   16.088376] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20
[   16.088388] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[   16.088392] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   16.088414] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[   16.088440] uhci_hcd 0000:00:1a.1: irq 20, io base 0x0000e000
[   16.088536] usb usb2: configuration #1 chosen from 1 choice
[   16.088556] hub 2-0:1.0: USB hub found
[   16.088560] hub 2-0:1.0: 2 ports detected
[   16.192363] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
[   16.192375] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   16.192379] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   16.192399] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[   16.192426] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000dc00
[   16.192523] usb usb3: configuration #1 chosen from 1 choice
[   16.192543] hub 3-0:1.0: USB hub found
[   16.192547] hub 3-0:1.0: 2 ports detected
[   16.295251] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[   16.295260] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   16.295264] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   16.295284] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[   16.295310] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
[   16.295405] usb usb4: configuration #1 chosen from 1 choice
[   16.295426] hub 4-0:1.0: USB hub found
[   16.295430] hub 4-0:1.0: 2 ports detected
[   16.327159] usb 1-2: new full speed USB device using uhci_hcd and address 2
[   16.399174] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   16.399183] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   16.399187] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   16.399207] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[   16.399233] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[   16.399334] usb usb5: configuration #1 chosen from 1 choice
[   16.399354] hub 5-0:1.0: USB hub found
[   16.399358] hub 5-0:1.0: 2 ports detected
[   16.460495] usb 1-2: configuration #1 chosen from 1 choice
[   16.503139] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[   16.503152] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[   16.503155] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   16.503178] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[   16.507072] ehci_hcd 0000:00:1a.7: debug port 1
[   16.507077] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[   16.507082] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400
[   16.520026] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   16.520155] usb usb6: configuration #1 chosen from 1 choice
[   16.520174] hub 6-0:1.0: USB hub found
[   16.520179] hub 6-0:1.0: 4 ports detected
[   16.624061] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
[   16.624070] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   16.624074] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   16.624092] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[   16.628009] ehci_hcd 0000:00:1d.7: debug port 1
[   16.628014] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   16.628019] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfebff000
[   16.654949] Clocksource tsc unstable (delta = -10504254851 ns)
[   16.659147] Time: hpet clocksource has been installed.
[   16.659446] usb 3-2: new low speed USB device using uhci_hcd and address 2
[   16.660317] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   16.660441] usb usb7: configuration #1 chosen from 1 choice
[   16.660473] hub 7-0:1.0: USB hub found
[   16.660477] hub 7-0:1.0: 6 ports detected
[   16.663344] ACPI: PCI Interrupt 0000:09:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   16.716059] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[feaff800-feafffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[   16.720128] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[   16.720158] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   16.720169] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[   16.720202] ahci 0000:00:1f.2: version 3.0
[   16.720225] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 22
[   16.725254] usb 1-2: USB disconnect, address 2
[   16.734566] usb 6-2: new high speed USB device using ehci_hcd and address 2
[   16.880107] usb 6-2: configuration #1 chosen from 1 choice
[   17.034783] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[   17.034789] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part
[   17.034796] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   17.035026] scsi0 : ahci
[   17.035247] scsi1 : ahci
[   17.035423] scsi2 : ahci
[   17.035528] ata1: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff900 irq 216
[   17.035531] ata2: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff980 irq 216
[   17.035533] ata3: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa00 irq 216
[   17.039636] usb 3-2: new low speed USB device using uhci_hcd and address 3
[   17.041862] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e0180003b73a1e]
[   17.047582] usb 3-2: configuration #1 chosen from 1 choice
[   17.071114] usb 5-1: new full speed USB device using uhci_hcd and address 2
[   17.071327] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   17.072648] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[   17.072740] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[   17.073113] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
[   17.073926] ata1.00: ATA-7: ST9120822AS, 3.ALC, max UDMA/133
[   17.073929] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   17.075392] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[   17.075490] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[   17.075884] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
[   17.076762] ata1.00: configured for UDMA/133
[   17.081682] usb 5-1: configuration #1 chosen from 1 choice
[   17.085899] ata2: SATA link down (SStatus 0 SControl 300)
[   17.091780] ata3: SATA link down (SStatus 0 SControl 300)
[   17.091960] scsi 0:0:0:0: Direct-Access     ATA      ST9120822AS      3.AL PQ: 0 ANSI: 5
[   17.092040] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[   17.108466] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[   17.108472] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[   17.108480] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   17.108604] scsi3 : ahci
[   17.108641] ata4: SATA max UDMA/133 abar m8192@0xfe1fe000 port 0xfe1fe100 irq 18
[   17.114345] ata4: SATA link down (SStatus 0 SControl 300)
[   17.123529] ata_piix 0000:00:1f.1: version 2.12
[   17.123546] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[   17.123580] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   17.128784] scsi4 : ata_piix
[   17.129224] scsi5 : ata_piix
[   17.129759] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[   17.129762] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[   17.153528] Driver 'sd' needs updating - please use bus_type methods
[   17.153602] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[   17.153612] sd 0:0:0:0: [sda] Write Protect is off
[   17.153614] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   17.153629] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   17.153669] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[   17.153677] sd 0:0:0:0: [sda] Write Protect is off
[   17.153679] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   17.153693] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   17.153696]  sda:<6>usbcore: registered new interface driver hiddev
[   17.170167]  sda1 sda2 <<6>input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/input/input2
[   17.187246] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-2
[   17.187266] usbcore: registered new interface driver usbhid
[   17.187269] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   17.193117]  sda5 >
[   17.193209] sd 0:0:0:0: [sda] Attached SCSI disk
[   17.196575] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   17.338571] ata5.00: ATAPI: MATSHITADVD-RAM UJ-860S, 1.00, max UDMA/33
[   17.340441] ata5.00: configured for UDMA/33
[   17.340505] ata6: port disabled. ignoring.
[   17.341884] scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-860S  1.00 PQ: 0 ANSI: 5
[   17.341953] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[   17.347434] Driver 'sr' needs updating - please use bus_type methods
[   17.351650] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   17.351653] Uniform CD-ROM driver Revision: 3.20
[   17.351694] sr 4:0:0:0: Attached scsi CD-ROM sr0
[   17.473254] Attempting manual resume
[   17.473257] swsusp: Resume From Partition 8:5
[   17.473258] PM: Checking swsusp image.
[   17.473403] PM: Resume from disk failed.
[   17.518116] kjournald starting.  Commit interval 5 seconds
[   17.518134] EXT3-fs: mounted filesystem with ordered data mode.
[   23.812822] Linux agpgart interface v0.102
[   23.866822] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   23.892765] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   23.931202] input: Power Button (FF) as /devices/virtual/input/input3
[   23.951643] ACPI: Power Button (FF) [PWRF]
[   23.951751] input: Sleep Button (CM) as /devices/virtual/input/input4
[   23.983623] ACPI: Sleep Button (CM) [SLPB]
[   23.983694] input: Lid Switch as /devices/virtual/input/input5
[   23.985376] ACPI: Lid Switch [LID]
[   24.115358] ACPI: AC Adapter [AC0] (on-line)
[   24.215856] ACPI: Battery Slot [BAT0] (battery present)
[   24.249887] asus-laptop: Asus Laptop Support version 0.42
[   24.250132] asus-laptop:   F3Sr model detected
[   24.253156] Registered led device: asus:mail
[   24.375528] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1b/LNXVIDEO:00/input/input6
[   24.396372] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   24.472645] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   24.500389] [fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes.
[   24.500419] [fglrx] ASYNCIO init succeed!
[   24.501300] [fglrx] PAT is enabled successfully!
[   24.502274] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[   24.594466] iTCO_vendor_support: vendor-support=0
[   24.608447] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   24.608533] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0860)
[   24.608566] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   24.668066] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   24.668079] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   24.668095] atl1 0000:02:00.0: version 2.0.7
[   24.759995] Linux video capture interface: v2.00
[   24.961592] Bluetooth: Core ver 2.11
[   24.975812] NET: Registered protocol family 31
[   24.975815] Bluetooth: HCI device and connection manager initialized
[   24.975820] Bluetooth: HCI socket layer initialized
[   25.001290] uvcvideo: Found UVC 1.00 device USB2.0 1.3M UVC WebCam  (04f2:b012)
[   25.008665] usbcore: registered new interface driver uvcvideo
[   25.008669] USB Video Class driver (v0.1.0)
[   25.048045] ricoh-mmc: Ricoh MMC Controller disabling driver
[   25.048048] ricoh-mmc: Copyright(c) Philip Langdale
[   25.048085] ricoh-mmc: Ricoh MMC controller found at 0000:09:01.2 [1180:0843] (rev 12)
[   25.048096] ricoh-mmc: Controller is now disabled.
[   25.053710] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   25.055906] sdhci: Secure Digital Host Controller Interface driver
[   25.055908] sdhci: Copyright(c) Pierre Ossman
[   25.055965] sdhci: SDHCI controller found at 0000:09:01.1 [1180:0822] (rev 22)
[   25.055983] ACPI: PCI Interrupt 0000:09:01.1[B] -> GSI 17 (level, low) -> IRQ 17
[   25.056992] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[   25.059021] mmc0: SDHCI at 0xfeaff400 irq 17 DMA
[   25.094537] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.0
[   25.094540] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[   25.094622] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   25.094631] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   25.094651] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[   25.112981] Bluetooth: HCI USB driver ver 2.9
[   25.116174] usbcore: registered new interface driver hci_usb
[   25.310929] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
[   25.310953] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   25.418277] mmc0: new SD card at address 0001
[   25.656026] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[   25.695583] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[   25.829797] mmcblk0: mmc0:0001 SD 967680KiB (ro)
[   25.829824]  mmcblk0: p1
[   26.065881] lp: driver loaded but no devices found
[   26.094963] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
[   26.096128] wmaster0: Selected rate control algorithm 'iwl-4965-rs'
[   26.174569] Adding 3028212k swap on /dev/sda5.  Priority:-1 extents:1 across:3028212k
[   26.180183] EXT3 FS on sda1, internal journal
[   26.312112] device-mapper: uevent: version 1.0.3
[   26.312139] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[   27.059488] ip_tables: (C) 2000-2006 Netfilter Core Team
[   27.483698] No dock devices found.
[   28.324454] apm: BIOS not found.
[   28.525524] ppdev: user-space parallel port driver
[   28.680286] audit(1236285152.794:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5517 profile="/usr/sbin/cupsd" namespace="default"
[   29.897508] Bluetooth: L2CAP ver 2.9
[   29.897518] Bluetooth: L2CAP socket layer initialized
[   30.126021] Bluetooth: RFCOMM socket layer initialized
[   30.126043] Bluetooth: RFCOMM TTY layer initialized
[   30.126047] Bluetooth: RFCOMM ver 1.8
[   31.961380] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   34.057738] [fglrx] Reserve Block - 0 offset =  0X7ffb000 length = 0X5000
[   34.057745] [fglrx] Reserve Block - 1 offset =  0X0 length = 0X1000000
[   34.057748] [fglrx] Reserve Block - 2 offset =  0X7f7a000 length = 0X80000
[   34.486622] [fglrx] interrupt source 10000000 successfully enabled
[   34.486634] [fglrx] enable ID = 0x00000006
[   34.486648] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[   34.507003] [fglrx] interrupt source 60000001 successfully enabled
[   34.507013] [fglrx] enable ID = 0x00000007
[   34.507023] [fglrx] Receive enable interrupt message with irqEnableMask: 60000001
[   34.507113] [fglrx] interrupt source 00000040 successfully enabled
[   34.507118] [fglrx] enable ID = 0x00000008
[   34.507127] [fglrx] Receive enable interrupt message with irqEnableMask: 00000040
[   34.522801] [fglrx] interrupt source ff00002c successfully enabled
[   34.522809] [fglrx] enable ID = 0x00000009
[   34.522818] [fglrx] Receive enable interrupt message with irqEnableMask: ff00002c
[   34.522898] [fglrx] interrupt source ff00002d successfully enabled
[   34.522904] [fglrx] enable ID = 0x0000000A
[   34.522912] [fglrx] Receive enable interrupt message with irqEnableMask: ff00002d
[   34.522985] [fglrx] interrupt source 20000400 successfully enabled
[   34.522990] [fglrx] enable ID = 0x0000000B
[   34.522998] [fglrx] Receive enable interrupt message with irqEnableMask: 20000400
[   49.043040] NET: Registered protocol family 10
[   49.043775] lo: Disabled Privacy Extensions
[   49.044909] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   49.046302] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   66.296878] NET: Registered protocol family 17
[   68.370225] CPU0 attaching NULL sched-domain.
[   68.370237] CPU1 attaching NULL sched-domain.
[   68.379275] CPU0 attaching sched-domain:
[   68.379283]  domain 0: span 03
[   68.379288]   groups: 01 02
[   68.379295] CPU1 attaching sched-domain:
[   68.379298]  domain 0: span 03
[   68.379303]   groups: 02 01
[   68.639805] wlan0: Initial auth_alg=0
[   68.639817] wlan0: authenticate with AP 00:1e:40:65:2a:4d
[   68.641792] wlan0: RX authentication from 00:1e:40:65:2a:4d (alg=0 transaction=2 status=0)
[   68.641801] wlan0: authenticated
[   68.641805] wlan0: associate with AP 00:1e:40:65:2a:4d
[   68.644487] wlan0: RX AssocResp from 00:1e:40:65:2a:4d (capab=0x411 status=0 aid=1)
[   68.644494] wlan0: associated
[   68.644502] wlan0: CTS protection enabled (BSSID=00:1e:40:65:2a:4d)
[   68.649098] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   80.373845] wlan0: no IPv6 routers present
[ 5408.558878] CPU0 attaching NULL sched-domain.
[ 5408.558883] CPU1 attaching NULL sched-domain.
[ 5408.581600] CPU0 attaching sched-domain:
[ 5408.581605]  domain 0: span 03
[ 5408.581606]   groups: 01 02
[ 5408.581609]   domain 1: span 03
[ 5408.581611]    groups: 03
[ 5408.581613] CPU1 attaching sched-domain:
[ 5408.581614]  domain 0: span 03
[ 5408.581616]   groups: 02 01
[ 5408.581619]   domain 1: span 03
[ 5408.581620]    groups: 03
[ 5409.645742] Monitor-Mwait will be used to enter C-2 state
[ 5409.645753] Monitor-Mwait will be used to enter C-3 state
[ 5426.226145] CPU0 attaching NULL sched-domain.
[ 5426.226157] CPU1 attaching NULL sched-domain.
[ 5426.229617] CPU0 attaching sched-domain:
[ 5426.229630]  domain 0: span 03
[ 5426.229634]   groups: 01 02
[ 5426.229641] CPU1 attaching sched-domain:
[ 5426.229644]  domain 0: span 03
[ 5426.229648]   groups: 02 01
[ 6886.426989] CPU0 attaching NULL sched-domain.
[ 6886.426996] CPU1 attaching NULL sched-domain.
[ 6886.449499] CPU0 attaching sched-domain:
[ 6886.449505]  domain 0: span 03
[ 6886.449507]   groups: 01 02
[ 6886.449509]   domain 1: span 03
[ 6886.449511]    groups: 03
[ 6886.449513] CPU1 attaching sched-domain:
[ 6886.449514]  domain 0: span 03
[ 6886.449516]   groups: 02 01
[ 6886.449518]   domain 1: span 03
[ 6886.449519]    groups: 03
[ 6917.327469] CPU0 attaching NULL sched-domain.
[ 6917.327480] CPU1 attaching NULL sched-domain.
[ 6917.355118] CPU0 attaching sched-domain:
[ 6917.355128]  domain 0: span 03
[ 6917.355133]   groups: 01 02
[ 6917.355140] CPU1 attaching sched-domain:
[ 6917.355144]  domain 0: span 03
[ 6917.355147]   groups: 02 01
gokhanyildiz@gokhan-pc:~$



[heartsmagic]

Ne yazık ki dmesg pek fikir vermedi. Hataların -özellikle beklediği bölümdeki- resmini görmemiz daha güzel olacaktır.

[Malik]

bir ara elektrik kesilince bilgisayar kendiliğinden kapandı ve bende de aynı sorun olmuştu. güncellemeyi yaptım fakat değişmedi. Birkaç gün sonra kendiliğinden kayboldu.

[gokhanyildiz]

http://www.gokhan-yildiz.com/hata-1.jpg
http://www.gokhan-yildiz.com/hata-2.jpg

[zeitgeist]

İlk resimde verilen hata ekranını hatırlıyorum; Nvidia ekran kartımı arıza nedeniyle Ati ile değiştirmek zorunda kaldığım zaman tam olarak aynı görüntüyle karşılaşmıştım ve yaptığım tek şey ekran kartımı değiştirmek olduğu halde bilgisayarı kapatırken ikinci resimde verilen nework hatasını da alıyordum. Forumda yazılanlarla Driver kurulumu ve Xorg düzenlemesiyle düzeltmiştim. Gerçi sen sorunun çıkma nedeni olarak herhangi bir donanım değişikliğinden bahsetmemişsin ama yine de bir olasılık olarak belirtmek istedim.

[heartsmagic]

İkinci resimdeki hata ve uyarıların sistemi ne kadar geciktireceğini bilemiyorum. Ancak @erginemr'in verdiği başlığı denedin mi?
http://forum.ubuntu-tr.net/index.php/topic,1027.msg28531.html#msg28531

Ancak eğer sorun olmayacaksa networkmanager'ı kaldırıp, wicd kurmayı deneyebilirsin. Forumda wicd tanımı mevcut.

İlk resimdeki hata ise bana biraz uuid meselelerini çağrıştırdı. Belki yanlış algılamış da olabilirim ancak

Kod Seç Genişlet

sudo fdisk -l
sudo blkid
cat /etc/fstab


komutlarının çıktılarını görebilir miyiz?

[gokhanyildiz]

Kod Seç Genişlet

Disk /dev/sda: 120.0 GB, 120034123776 bayt
255 heads, 63 sectors/track, 14593 cylinders
Units = silindir of 16065 * 512 = 8225280 bytes
Disk identifier: 0xbbc58b91

   Aygıt Açılış    Başlangıç     Bitiş  BlokSayısı Kml Sistem
/dev/sda1   *           1       14216   114189988+  83  Linux
/dev/sda2           14217       14593     3028252+   5  Ek
/dev/sda5           14217       14593     3028221   82  Linux takas / Solaris

Disk /dev/mmcblk0: 990 MB 990904320 bayt
32 heads, 63 sectors/track, 960 cylinders
Units = silindir of 2016 * 512 = 1032192 bytes
Disk identifier: 0x00000000

        Aygıt Açılış    Başlangıç     Bitiş  BlokSayısı Kml Sistem
/dev/mmcblk0p1               1         960      967613+   6  FAT16


Kod Seç Genişlet

/dev/sda1: UUID="d2ae107a-8661-4bde-8db0-c0a9c4394199" TYPE="ext3"
/dev/sda5: TYPE="swap" UUID="363dd1ae-0e2a-4ac0-9074-416d8b9dc5cf"
/dev/mmcblk0p1: SEC_TYPE="msdos" UUID="0403-0201" TYPE="vfat"

Kod Seç Genişlet

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# /dev/sda1
UUID=d2ae107a-8661-4bde-8db0-c0a9c4394199 /               ext3    relatime,errors=remount-ro 0       0
# /dev/sda5
UUID=363dd1ae-0e2a-4ac0-9074-416d8b9dc5cf none            swap    sw              0       0
/dev/scd0       /media/cdrom0   udf,iso9660 user,noauto,exec,utf8 0       0


[gokhanyildiz]

verdiğiniz kodların çıktıları sırasıyla bunlar.verdiğiniz linkteki uygulamaları tek tek yaptım.

[heartsmagic]

Kod Seç Genişlet

cat /etc/initramfs-tools/conf.d/resume ne diyor?

[gokhanyildiz]

RESUME=UUID=363dd1ae-0e2a-4ac0-9074-416d8b9dc5cf

[gokhanyildiz]

bir çözüm yok mu?

[heartsmagic]

Ne yazık ki benim sorabileceğim başka bir şey kalmadı. Takas alanı durumu da normal görünüyor.

Sistemi güncel tutmaya çalış demekten başka bir şey gelmiyor elimden.

[gokhanyildiz]

güncelleme uyarısı alıyorum.bazı paket güncellemelerini yapıyorum.ama bazı güncelleme uyarılarında uyarı iconuna tıkladıktan sonra listede herhangi bir güncelleme görünmüyor.denetle dediğim zaman 47 paket indiriliyor diyor ondan sonra hata alıyorum.sebebi ne olabilir?bundan kaynaklanabilir mi?

[heartsmagic]

Kod Seç Genişlet

sudo aptitude update
sudo aptitude safe-upgrade

komutları ve çıktıları işimize yarayacaktır.