[Çözüldü] /D üzerinde hiçbirşey silemiyorum kopyalayamıyorum ?

[A.t.a.2344]

windows 10 yanına ubuntu 18.04 kurulu. Normal işlemlerinde herhangi bir sorun  yok. Yerel disk d üzerinde dosya silme veya kopyalama işlemi yapamıyorum. Geri dönüşüm kutusunun içindekileri silemiyorum. Daha önce böyle bir problem yoktu yardımcı olur musunuz ?

[gecegezen]

Bir tahmin sadece ama windowsu kapatıyorsunuz degilmi ubuntuyu açmadan Windows varsayılan olarak kapat deginizde kapanmaz da Hızlı başlat Kapatın.

[A.t.a.2344]

Bir tahmin sadece ama windowsu kapatıyorsunuz degilmi ubuntuyu açmadan Windows varsayılan olarak kapat deginizde kapanmaz da Hızlı başlat Kapatın.
[/quot

Bilgisayarı açarken seçimlerde ubuntu seçili geliyor zaten. açıldıktan sonra /d sürücüsüne erişimim yok kopyalama işlemi yapamıyorum. bu gün oldu. bu güne kadar böyle bir problemim hiç olmadı. Windows tarafında böyle bir sorun yok . virtual box la kurmadım ubuntuyu windows un yanına kuruldu .

[cosmicowl]

Öncelikle yerel disk d'nin tam olarak ne olduğunu bilmemiz gerekir. Ntfs dosya sistemli windows işletim sisteminin kurulu olduğu disk bölümümü, yoksa ntfs biçimli başka bir bölüm mü? Ayrıca erişimim yok derken kopyalama vs yaparken aldığınız bir hatadan bahsediyorsanız hatayıda belirtin.

[gecegezen]

Bir tahmin sadece ama windowsu kapatıyorsunuz degilmi ubuntuyu açmadan Windows varsayılan olarak kapat deginizde kapanmaz da Hızlı başlat Kapatın.

Bilgisayarı açarken seçimlerde ubuntu seçili geliyor zaten. açıldıktan sonra /d sürücüsüne erişimim yok kopyalama işlemi yapamıyorum. bu gün oldu. bu güne kadar böyle bir problemim hiç olmadı. Windows tarafında böyle bir sorun yok . virtual box la kurmadım ubuntuyu windows un yanına kuruldu .

Yine benimkisi bir tahmin sadece, windows' tarafında hızlı başlat kapalı değil mi? Windows bilgisayarı hızlı açılıyormuş gibi göstermek için kapat dediğinizde kapatmıyor uykuya alıyor böyle bir durumda da siz ubuntu'yu açarsanız eğer ubuntu'da ya saft okunur olarak bağlanır dosyalama sistemine yada hiç bağlanmaz windows hata vermesin diye.
dosyalama sistemini tıkladıktan sonra aşağıdaki komutun yazıp çıktıları buraya geçer misin?

Kod Seç Genişlet

dmesg

[A.t.a.2344]

[mention=648329]@gecegezen[/mention]

Kod Seç Genişlet


zoppo@zoppo:/media/zoppo/767A73167A72D27B$ dmesg
[    0.000000] microcode: microcode updated early to revision 0xcc, date = 2019-04-01
[    0.000000] Linux version 5.0.0-23-generic (buildd@lgw01-amd64-030) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #24~18.04.1-Ubuntu SMP Mon Jul 29 16:12:28 UTC 2019 (Ubuntu 5.0.0-23.24~18.04.1-generic 5.0.15)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-23-generic root=UUID=0a818a37-8525-4303-8d34-8d9bbdbed6e9 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006a000fff] usable
[    0.000000] BIOS-e820: [mem 0x000000006a001000-0x000000006a001fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006a002000-0x000000006a02bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006a02c000-0x000000006e838fff] usable
[    0.000000] BIOS-e820: [mem 0x000000006e839000-0x000000006f220fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006f221000-0x000000006f266fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000006f267000-0x000000006fb8dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006fb8e000-0x000000006ff9dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006ff9e000-0x000000006fffdfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000006fffe000-0x000000006fffefff] usable
[    0.000000] BIOS-e820: [mem 0x0000000070000000-0x0000000077ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004843fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi:  ESRT=0x6ff9a018  ACPI=0x6f22f000  ACPI 2.0=0x6f22f000  SMBIOS=0x6fed2000  SMBIOS 3.0=0x6fed1000
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: CASPER BILGISAYAR SISTEMLERI.A.S. CASPER NIRVANA NOTEBOOK/CASPER NIRVANA NOTEBOOK, BIOS 223 04/18/2016
[    0.000000] tsc: Detected 2600.000 MHz processor
[    0.001896] tsc: Detected 2592.000 MHz TSC
[    0.001896] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001898] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001906] last_pfn = 0x484400 max_arch_pfn = 0x400000000
[    0.001920] MTRR default type: write-back
[    0.001921] MTRR fixed ranges enabled:
[    0.001922]   00000-9FFFF write-back
[    0.001923]   A0000-BFFFF uncachable
[    0.001924]   C0000-FFFFF write-protect
[    0.001924] MTRR variable ranges enabled:
[    0.001926]   0 base 0080000000 mask 7F80000000 uncachable
[    0.001927]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.001927]   2 base 007A000000 mask 7FFE000000 uncachable
[    0.001928]   3 base 0079000000 mask 7FFF000000 uncachable
[    0.001929]   4 base 0078800000 mask 7FFF800000 uncachable
[    0.001929]   5 base 0078400000 mask 7FFFC00000 uncachable
[    0.001930]   6 disabled
[    0.001930]   7 disabled
[    0.001931]   8 disabled
[    0.001931]   9 disabled
[    0.003025] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.003179] last_pfn = 0x6ffff max_arch_pfn = 0x400000000
[    0.019442] esrt: Reserving ESRT space from 0x000000006ff9a018 to 0x000000006ff9a050.
[    0.019448] check: Scanning 1 areas for low memory corruption
[    0.019452] Using GB pages for direct mapping
[    0.019454] BRK [0x2c9001000, 0x2c9001fff] PGTABLE
[    0.019456] BRK [0x2c9002000, 0x2c9002fff] PGTABLE
[    0.019457] BRK [0x2c9003000, 0x2c9003fff] PGTABLE
[    0.019493] BRK [0x2c9004000, 0x2c9004fff] PGTABLE
[    0.019495] BRK [0x2c9005000, 0x2c9005fff] PGTABLE
[    0.019633] BRK [0x2c9006000, 0x2c9006fff] PGTABLE
[    0.019664] BRK [0x2c9007000, 0x2c9007fff] PGTABLE
[    0.019750] BRK [0x2c9008000, 0x2c9008fff] PGTABLE
[    0.019800] BRK [0x2c9009000, 0x2c9009fff] PGTABLE
[    0.019846] RAMDISK: [mem 0x3333f000-0x35996fff]
[    0.019856] ACPI: Early table checksum verification disabled
[    0.019859] ACPI: RSDP 0x000000006F22F000 000024 (v02 ALASKA)
[    0.019862] ACPI: XSDT 0x000000006F22F0B0 0000E4 (v01 CASPER ERA      01072009 AMI  00010013)
[    0.019867] ACPI: FACP 0x000000006F25A088 00010C (v05 CASPER ERA      01072009 AMI  00010013)
[    0.019872] ACPI: DSDT 0x000000006F22F228 02AE5D (v02 CASPER ERA      01072009 INTL 20120913)
[    0.019875] ACPI: FACS 0x000000006FB83F80 000040
[    0.019877] ACPI: APIC 0x000000006F25A198 000084 (v03 CASPER ERA      01072009 AMI  00010013)
[    0.019879] ACPI: FPDT 0x000000006F25A220 000044 (v01 CASPER ERA      01072009 AMI  00010013)
[    0.019882] ACPI: FIDT 0x000000006F25A268 00009C (v01 CASPER ERA      01072009 AMI  00010013)
[    0.019884] ACPI: ECDT 0x000000006F25A308 0000C1 (v01 CASPER ERA      00000001 OEM. 00000003)
[    0.019887] ACPI: MCFG 0x000000006F25A3D0 00003C (v01 CASPER ERA      01072009 MSFT 00000097)
[    0.019889] ACPI: HPET 0x000000006F25A410 000038 (v01 CASPER ERA      01072009 AMI. 0005000B)
[    0.019891] ACPI: SSDT 0x000000006F25A448 00036D (v01 CASPER ERA      00001000 INTL 20120913)
[    0.019894] ACPI: LPIT 0x000000006F25A7B8 000094 (v01 CASPER ERA      00000000 MSFT 0000005F)
[    0.019896] ACPI: SSDT 0x000000006F25A850 000248 (v02 CASPER ERA      00000000 INTL 20120913)
[    0.019899] ACPI: SSDT 0x000000006F25AA98 002BAE (v02 CASPER ERA      00001000 INTL 20120913)
[    0.019901] ACPI: DBGP 0x000000006F25D648 000034 (v01 CASPER ERA      00000000 MSFT 0000005F)
[    0.019903] ACPI: DBG2 0x000000006F25D680 000054 (v00 CASPER ERA      00000000 MSFT 0000005F)
[    0.019906] ACPI: SSDT 0x000000006F25D6D8 0004E6 (v02 CASPER ERA      00000000 INTL 20120913)
[    0.019908] ACPI: MSDM 0x000000006F25DBC0 000055 (v03 CASPER ERA      00000000 TEST 00000000)
[    0.019911] ACPI: SSDT 0x000000006F25DC18 005587 (v02 CASPER ERA      00003000 INTL 20120913)
[    0.019913] ACPI: UEFI 0x000000006F2631A0 000042 (v01 CASPER ERA      00000000      00000000)
[    0.019916] ACPI: SSDT 0x000000006F2631E8 000E73 (v02 CASPER ERA      00003000 INTL 20120913)
[    0.019918] ACPI: BGRT 0x000000006F264060 000038 (v01 CASPER ERA      01072009 AMI  00010013)
[    0.019920] ACPI: SSDT 0x000000006F264098 00078A (v02 CASPER ERA      00001000 INTL 20120913)
[    0.019923] ACPI: DMAR 0x000000006F264828 0000A8 (v01 CASPER ERA      00000001 INTL 00000001)
[    0.019925] ACPI: TPM2 0x000000006F2648D0 000034 (v03 CASPER ERA      00000001 AMI  00000000)
[    0.019927] ACPI: SSDT 0x000000006F264908 0019DC (v01 CASPER ERA      00001000 INTL 20120913)
[    0.019930] ACPI: ASF! 0x000000006F2662E8 0000A5 (v32 CASPER ERA      00000001 TFSM 000F4240)
[    0.019940] ACPI: Local APIC address 0xfee00000
[    0.020120] No NUMA configuration found
[    0.020121] Faking a node at [mem 0x0000000000000000-0x00000004843fffff]
[    0.020131] NODE_DATA(0) allocated [mem 0x4843d5000-0x4843fffff]
[    0.020320] Zone ranges:
[    0.020321]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.020322]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.020323]   Normal   [mem 0x0000000100000000-0x00000004843fffff]
[    0.020324]   Device   empty
[    0.020325] Movable zone start for each node
[    0.020328] Early memory node ranges
[    0.020329]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.020329]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.020330]   node   0: [mem 0x0000000000100000-0x000000006a000fff]
[    0.020331]   node   0: [mem 0x000000006a02c000-0x000000006e838fff]
[    0.020331]   node   0: [mem 0x000000006fffe000-0x000000006fffefff]
[    0.020332]   node   0: [mem 0x0000000100000000-0x00000004843fffff]
[    0.020437] Zeroed struct page in unavailable ranges: 6229 pages
[    0.020438] Initmem setup node 0 [mem 0x0000000000001000-0x00000004843fffff]
[    0.020439] On node 0 totalpages: 4139947
[    0.020440]   DMA zone: 64 pages used for memmap
[    0.020441]   DMA zone: 22 pages reserved
[    0.020441]   DMA zone: 3996 pages, LIFO batch:0
[    0.020540]   DMA32 zone: 7009 pages used for memmap
[    0.020540]   DMA32 zone: 448527 pages, LIFO batch:63
[    0.033119]   Normal zone: 57616 pages used for memmap
[    0.033119]   Normal zone: 3687424 pages, LIFO batch:63
[    0.119931] Reserving Intel graphics memory at [mem 0x78c00000-0x7abfffff]
[    0.120074] ACPI: PM-Timer IO Port: 0x1808
[    0.120076] ACPI: Local APIC address 0xfee00000
[    0.120082] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.120082] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.120083] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.120083] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.120110] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.120112] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.120114] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.120115] ACPI: IRQ0 used by override.
[    0.120116] ACPI: IRQ9 used by override.
[    0.120118] Using ACPI (MADT) for SMP configuration information
[    0.120119] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.120127] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.120144] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.120145] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.120147] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.120147] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.120149] PM: Registered nosave memory: [mem 0x6a001000-0x6a001fff]
[    0.120149] PM: Registered nosave memory: [mem 0x6a002000-0x6a02bfff]
[    0.120150] PM: Registered nosave memory: [mem 0x6e839000-0x6f220fff]
[    0.120151] PM: Registered nosave memory: [mem 0x6f221000-0x6f266fff]
[    0.120152] PM: Registered nosave memory: [mem 0x6f267000-0x6fb8dfff]
[    0.120152] PM: Registered nosave memory: [mem 0x6fb8e000-0x6ff9dfff]
[    0.120153] PM: Registered nosave memory: [mem 0x6ff9e000-0x6fffdfff]
[    0.120154] PM: Registered nosave memory: [mem 0x6ffff000-0x6fffffff]
[    0.120154] PM: Registered nosave memory: [mem 0x70000000-0x77ffffff]
[    0.120155] PM: Registered nosave memory: [mem 0x78000000-0x78bfffff]
[    0.120155] PM: Registered nosave memory: [mem 0x78c00000-0x7abfffff]
[    0.120156] PM: Registered nosave memory: [mem 0x7ac00000-0xdfffffff]
[    0.120156] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.120157] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.120157] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.120158] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.120158] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.120159] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.120159] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.120160] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.120160] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.120162] [mem 0x7ac00000-0xdfffffff] available for PCI devices
[    0.120163] Booting paravirtualized kernel on bare hardware
[    0.120166] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.120175] random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0
[    0.120181] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.120307] percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u524288
[    0.120312] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.120313] pcpu-alloc: [0] 0 1 2 3
[    0.120335] Built 1 zonelists, mobility grouping on.  Total pages: 4075236
[    0.120336] Policy zone: Normal
[    0.120337] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-23-generic root=UUID=0a818a37-8525-4303-8d34-8d9bbdbed6e9 ro quiet splash vt.handoff=1
[    0.123446] Calgary: detecting Calgary via BIOS EBDA area
[    0.123447] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.158227] Memory: 16073428K/16559788K available (14339K kernel code, 2335K rwdata, 4312K rodata, 2584K init, 5196K bss, 486360K reserved, 0K cma-reserved)
[    0.158337] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.158342] Kernel/User page tables isolation: enabled
[    0.158355] ftrace: allocating 41572 entries in 163 pages
[    0.176033] rcu: Hierarchical RCU implementation.
[    0.176035] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.176036] Tasks RCU enabled.
[    0.176036] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.176037] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.178626] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.178941] spurious 8259A interrupt: IRQ7.
[    0.178960] vt handoff: transparent VT on vt#1
[    0.178964] Console: colour dummy device 80x25
[    0.178967] printk: console [tty0] enabled
[    0.178981] ACPI: Core revision 20181213
[    0.179344] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.179374] hpet clockevent registered
[    0.179446] APIC: Switch to symmetric I/O mode setup
[    0.179447] DMAR: Host address width 39
[    0.179449] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.179453] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[    0.179454] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.179458] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.179458] DMAR: RMRR base: 0x0000006efc3000 end: 0x0000006efe2fff
[    0.179459] DMAR: RMRR base: 0x00000078400000 end: 0x0000007abfffff
[    0.179461] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.179462] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.179462] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.179463] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.180967] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.180968] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.185179] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.203384] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns
[    0.203396] Calibrating delay loop (skipped), value calculated using timer frequency.. 5184.00 BogoMIPS (lpj=10368000)
[    0.203398] pid_max: default: 32768 minimum: 301
[    0.206463] LSM: Security Framework initializing
[    0.206474] Yama: becoming mindful.
[    0.206490] AppArmor: AppArmor initialized
[    0.208307] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.209209] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.209245] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.209274] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.209465] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.209465] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.209470] mce: CPU supports 8 MCE banks
[    0.209479] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.209493] process: using mwait in idle threads
[    0.209496] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.209496] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.209498] Spectre V2 : Mitigation: Full generic retpoline
[    0.209499] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.209499] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.209505] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.209505] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.209506] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.209534] MDS: Mitigation: Clear CPU buffers
[    0.209776] Freeing SMP alternatives memory: 36K
[    0.213125] TSC deadline timer enabled
[    0.213130] smpboot: CPU0: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[    0.213213] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.213244] ... version:                4
[    0.213245] ... bit width:              48
[    0.213245] ... generic registers:      4
[    0.213246] ... value mask:             0000ffffffffffff
[    0.213246] ... max period:             00007fffffffffff
[    0.213247] ... fixed-purpose events:   3
[    0.213247] ... event mask:             000000070000000f
[    0.213283] rcu: Hierarchical SRCU implementation.
[    0.213972] random: crng done (trusting CPU's manufacturer)
[    0.214254] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.214292] smp: Bringing up secondary CPUs ...
[    0.214364] x86: Booting SMP configuration:
[    0.214365] .... node  #0, CPUs:      #1 #2
[    0.215212] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.215212]  #3
[    0.215765] smp: Brought up 1 node, 4 CPUs
[    0.215765] smpboot: Max logical packages: 1
[    0.215765] smpboot: Total of 4 processors activated (20736.00 BogoMIPS)
[    0.219741] devtmpfs: initialized
[    0.219741] x86/mm: Memory block size: 128MB
[    0.220473] PM: Registering ACPI NVS region [mem 0x6a001000-0x6a001fff] (4096 bytes)
[    0.220473] PM: Registering ACPI NVS region [mem 0x6f267000-0x6fb8dfff] (9596928 bytes)
[    0.220473] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.220473] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.220473] pinctrl core: initialized pinctrl subsystem
[    0.220473] RTC time: 16:12:13, date: 2019-08-07
[    0.220473] NET: Registered protocol family 16
[    0.220473] audit: initializing netlink subsys (disabled)
[    0.220473] audit: type=2000 audit(1565194333.044:1): state=initialized audit_enabled=0 res=1
[    0.220473] EISA bus registered
[    0.220473] cpuidle: using governor ladder
[    0.220473] cpuidle: using governor menu
[    0.220473] KVM setup pv remote TLB flush
[    0.220473] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.220473] ACPI: bus type PCI registered
[    0.220473] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.220473] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.220473] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.220473] PCI: Using configuration type 1 for base access
[    0.220645] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.220645] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.220645] ACPI: Added _OSI(Module Device)
[    0.220645] ACPI: Added _OSI(Processor Device)
[    0.220645] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.220645] ACPI: Added _OSI(Processor Aggregator Device)
[    0.220645] ACPI: Added _OSI(Linux-Dell-Video)
[    0.220645] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.220645] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.270291] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.272238] ACPI: EC: EC started
[    0.272239] ACPI: EC: interrupt blocked
[    0.274524] ACPI: \: Used as first EC
[    0.274526] ACPI: \: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.274527] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.277366] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.315147] ACPI: Dynamic OEM Table Load:
[    0.315154] ACPI: SSDT 0xFFFF99BE31AEB800 000660 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.315840] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.317739] ACPI: Dynamic OEM Table Load:
[    0.317744] ACPI: SSDT 0xFFFF99BE3198F800 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.318294] ACPI: Dynamic OEM Table Load:
[    0.318298] ACPI: SSDT 0xFFFF99BE318FFD80 00008E (v02 PmRef  Cpu0Hwp  00003000 INTL 20120913)
[    0.318713] ACPI: Dynamic OEM Table Load:
[    0.318717] ACPI: SSDT 0xFFFF99BE319E1000 000130 (v02 PmRef  HwpLvt   00003000 INTL 20120913)
[    0.319717] ACPI: Dynamic OEM Table Load:
[    0.319723] ACPI: SSDT 0xFFFF99BE31AED000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.320610] ACPI: Dynamic OEM Table Load:
[    0.320614] ACPI: SSDT 0xFFFF99BE31ADF400 000119 (v02 PmRef  ApHwp    00003000 INTL 20120913)
[    0.321122] ACPI: Dynamic OEM Table Load:
[    0.321126] ACPI: SSDT 0xFFFF99BE31ADF000 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.324024] ACPI: Interpreter enabled
[    0.324065] ACPI: (supports S0 S3 S4 S5)
[    0.324066] ACPI: Using IOAPIC for interrupt routing
[    0.324106] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.325289] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.328130] ACPI: Power Resource [PG00] (on)
[    0.328566] ACPI: Power Resource [PG01] (on)
[    0.328980] ACPI: Power Resource [PG02] (on)
[    0.330725] ACPI: Power Resource [WRST] (off)
[    0.331142] ACPI: Power Resource [WRST] (off)
[    0.331569] ACPI: Power Resource [WRST] (off)
[    0.331987] ACPI: Power Resource [WRST] (off)
[    0.332403] ACPI: Power Resource [WRST] (off)
[    0.332465] ACPI: Power Resource [PC09] (on)
[    0.333819] ACPI: Power Resource [WRST] (off)
[    0.334242] ACPI: Power Resource [WRST] (off)
[    0.334660] ACPI: Power Resource [WRST] (off)
[    0.335082] ACPI: Power Resource [WRST] (off)
[    0.335510] ACPI: Power Resource [WRST] (off)
[    0.335926] ACPI: Power Resource [WRST] (off)
[    0.336345] ACPI: Power Resource [WRST] (off)
[    0.336761] ACPI: Power Resource [WRST] (off)
[    0.337177] ACPI: Power Resource [WRST] (off)
[    0.337595] ACPI: Power Resource [WRST] (off)
[    0.338012] ACPI: Power Resource [WRST] (off)
[    0.338431] ACPI: Power Resource [WRST] (off)
[    0.338857] ACPI: Power Resource [WRST] (off)
[    0.339273] ACPI: Power Resource [WRST] (off)
[    0.354197] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.354204] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.356008] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.356009] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.356762] PCI host bridge to bus 0000:00
[    0.356764] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.356765] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.356766] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.356767] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.356768] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.356768] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.356769] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.356770] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.356771] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.356772] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.356773] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.356774] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.356774] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.356775] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.356776] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.356777] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.356778] pci_bus 0000:00: root bus resource [mem 0x7ac00000-0xdfffffff window]
[    0.356779] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.356780] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.356787] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[    0.357191] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[    0.357202] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
[    0.357208] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.357212] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.357228] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.357446] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.357468] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
[    0.357535] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.357715] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.357736] pci 0000:00:14.2: reg 0x10: [mem 0xdf32e000-0xdf32efff 64bit]
[    0.357943] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.357969] pci 0000:00:16.0: reg 0x10: [mem 0xdf32d000-0xdf32dfff 64bit]
[    0.358043] pci 0000:00:16.0: PME# supported from D3hot
[    0.358232] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.358250] pci 0000:00:17.0: reg 0x10: [mem 0xdf328000-0xdf329fff]
[    0.358257] pci 0000:00:17.0: reg 0x14: [mem 0xdf32c000-0xdf32c0ff]
[    0.358265] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.358272] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.358279] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.358286] pci 0000:00:17.0: reg 0x24: [mem 0xdf32b000-0xdf32b7ff]
[    0.358328] pci 0000:00:17.0: PME# supported from D3hot
[    0.358517] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.358591] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.358822] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[    0.358895] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.359108] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[    0.359180] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.359408] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[    0.359686] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.359700] pci 0000:00:1f.2: reg 0x10: [mem 0xdf324000-0xdf327fff]
[    0.359906] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
[    0.359932] pci 0000:00:1f.3: reg 0x10: [mem 0xdf320000-0xdf323fff 64bit]
[    0.359957] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
[    0.360005] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.360255] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.360316] pci 0000:00:1f.4: reg 0x10: [mem 0xdf32a000-0xdf32a0ff 64bit]
[    0.360387] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.360681] pci 0000:01:00.0: [10de:139a] type 00 class 0x030200
[    0.360704] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[    0.360716] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.360728] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.360735] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.360743] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[    0.360840] pci 0000:01:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8 GT/s x4 link at 0000:00:1c.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[    0.360965] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.360967] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.360970] pci 0000:00:1c.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.360973] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.361051] pci 0000:02:00.0: [10ec:b723] type 00 class 0x028000
[    0.361097] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.361134] pci 0000:02:00.0: reg 0x18: [mem 0xdf200000-0xdf203fff 64bit]
[    0.361312] pci 0000:02:00.0: supports D1 D2
[    0.361313] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.361565] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.361568] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.361570] pci 0000:00:1c.4:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.361638] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.361666] pci 0000:03:00.0: reg 0x10: [io  0xc000-0xc0ff]
[    0.361692] pci 0000:03:00.0: reg 0x18: [mem 0xdf100000-0xdf100fff 64bit]
[    0.361709] pci 0000:03:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
[    0.361812] pci 0000:03:00.0: supports D1 D2
[    0.361813] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.361991] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.361993] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.361995] pci 0000:00:1c.5:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.361999] pci 0000:00:1c.5:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.364573] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.364641] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.364707] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.364776] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.364842] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.364909] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.364974] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.365038] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.365665] ACPI: EC: interrupt unblocked
[    0.365681] ACPI: EC: event unblocked
[    0.365694] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.365695] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.365769] SCSI subsystem initialized
[    0.365769] libata version 3.00 loaded.
[    0.365769] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.365769] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.365769] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.365769] vgaarb: loaded
[    0.365769] ACPI: bus type USB registered
[    0.365769] usbcore: registered new interface driver usbfs
[    0.365769] usbcore: registered new interface driver hub
[    0.365769] usbcore: registered new device driver usb
[    0.365769] pps_core: LinuxPPS API ver. 1 registered
[    0.365769] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.365769] PTP clock support registered
[    0.365769] EDAC MC: Ver: 3.0.0
[    0.365769] Registered efivars operations
[    0.371459] PCI: Using ACPI for IRQ routing
[    0.396470] PCI: pci_cache_line_size set to 64 bytes
[    0.396525] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.396526] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.396526] e820: reserve RAM buffer [mem 0x6a001000-0x6bffffff]
[    0.396527] e820: reserve RAM buffer [mem 0x6e839000-0x6fffffff]
[    0.396529] e820: reserve RAM buffer [mem 0x6ffff000-0x6fffffff]
[    0.396529] e820: reserve RAM buffer [mem 0x484400000-0x487ffffff]
[    0.399387] NetLabel: Initializing
[    0.399387] NetLabel:  domain hash size = 128
[    0.399387] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.399387] NetLabel:  unlabeled traffic allowed by default
[    0.399869] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.399873] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.401916] clocksource: Switched to clocksource tsc-early
[    0.409830] VFS: Disk quotas dquot_6.6.0
[    0.409843] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.409939] AppArmor: AppArmor Filesystem Enabled
[    0.409963] pnp: PnP ACPI init
[    0.410138] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.410163] pnp 00:01: Plug and Play ACPI device, IDs ETD2101 ETD0000 PNP0f13 (active)
[    0.410323] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.410325] system 00:02: [io  0xffff] has been reserved
[    0.410326] system 00:02: [io  0xffff] has been reserved
[    0.410327] system 00:02: [io  0xffff] has been reserved
[    0.410328] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.410329] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.410333] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.410434] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.410475] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.410478] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.410800] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.410801] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.410804] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.410805] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.410806] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.410808] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.410809] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.410810] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.410811] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.410812] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.410815] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.410860] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.410861] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.410862] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.410863] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.410864] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.410865] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.410866] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.410869] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.411208] system 00:07: [io  0xff00-0xfffe] has been reserved
[    0.411211] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.412507] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[    0.412508] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[    0.412511] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.413674] pnp: PnP ACPI: found 9 devices
[    0.419270] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.419291] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.419294] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.419297] pci 0000:00:1c.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.419299] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.419303] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.419305] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.419308] pci 0000:00:1c.4:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.419313] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.419315] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.419318] pci 0000:00:1c.5:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.419320] pci 0000:00:1c.5:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.419325] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.419326] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.419327] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.419328] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.419329] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.419330] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.419331] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.419332] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.419333] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.419334] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.419335] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.419336] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.419336] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.419337] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.419338] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.419339] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.419340] pci_bus 0000:00: resource 20 [mem 0x7ac00000-0xdfffffff window]
[    0.419341] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
[    0.419342] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.419343] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[    0.419344] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.419345] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.419346] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf2fffff]
[    0.419347] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.419348] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
[    0.419349] pci_bus 0000:03: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.419528] NET: Registered protocol family 2
[    0.419646] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.419694] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.419855] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.419948] TCP: Hash tables configured (established 131072 bind 65536)
[    0.419975] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.420011] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.420083] NET: Registered protocol family 1
[    0.420087] NET: Registered protocol family 44
[    0.420095] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.421191] PCI: CLS 0 bytes, default 64
[    0.421220] Unpacking initramfs...
[    0.961652] Freeing initrd memory: 39264K
[    0.983442] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.983444] software IO TLB: mapped [mem 0x6505a000-0x6905a000] (64MB)
[    0.983566] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns
[    0.983576] clocksource: Switched to clocksource tsc
[    0.983631] check: Scanning for low memory corruption every 60 seconds
[    0.985111] Initialise system trusted keyrings
[    0.985117] Key type blacklist registered
[    0.985139] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.986317] zbud: loaded
[    0.986705] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.986871] fuse init (API version 7.28)
[    1.019152] Key type asymmetric registered
[    1.019153] Asymmetric key parser 'x509' registered
[    1.019164] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    1.019192] io scheduler mq-deadline registered
[    1.019544] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[    1.019595] aer 0000:00:1c.0:pcie002: AER enabled with IRQ 122
[    1.019820] pcieport 0000:00:1c.4: Signaling PME with IRQ 123
[    1.020005] pcieport 0000:00:1c.5: Signaling PME with IRQ 124
[    1.020058] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.020119] efifb: probing for efifb
[    1.020132] efifb: framebuffer at 0xb0000000, using 1920k, total 1920k
[    1.020132] efifb: mode is 800x600x32, linelength=3200, pages=1
[    1.020133] efifb: scrolling: redraw
[    1.020134] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.020208] Console: switching to colour frame buffer device 100x37
[    1.020218] fb0: EFI VGA frame buffer device
[    1.020225] intel_idle: MWAIT substates: 0x11142120
[    1.020226] intel_idle: v0.4.1 model 0x4E
[    1.020422] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.020642] ACPI: AC Adapter [AC0] (on-line)
[    1.020708] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    1.020715] ACPI: Sleep Button [SLPB]
[    1.020742] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.020746] ACPI: Lid Switch [LID]
[    1.020768] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    1.020772] ACPI: Power Button [PWRB]
[    1.020794] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.020803] ACPI: Power Button [PWRF]
[    1.022562] thermal LNXTHERM:00: registered as thermal_zone0
[    1.022563] ACPI: Thermal Zone [THRM] (68 C)
[    1.022695] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.024193] Linux agpgart interface v0.103
[    1.024451] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[    1.024458] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[    1.033054] battery: ACPI: Battery Slot [BAT0] (battery present)
[    1.040862] loop: module loaded
[    1.041027] libphy: Fixed MDIO Bus: probed
[    1.041028] tun: Universal TUN/TAP device driver, 1.6
[    1.041053] PPP generic driver version 2.4.2
[    1.041085] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.041087] ehci-pci: EHCI PCI platform driver
[    1.041095] ehci-platform: EHCI generic platform driver
[    1.041103] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.041104] ohci-pci: OHCI PCI platform driver
[    1.041110] ohci-platform: OHCI generic platform driver
[    1.041116] uhci_hcd: USB Universal Host Controller Interface driver
[    1.041285] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.041290] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.042358] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[    1.042362] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.042523] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    1.042524] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.042525] usb usb1: Product: xHCI Host Controller
[    1.042526] usb usb1: Manufacturer: Linux 5.0.0-23-generic xhci-hcd
[    1.042527] usb usb1: SerialNumber: 0000:00:14.0
[    1.042607] hub 1-0:1.0: USB hub found
[    1.042621] hub 1-0:1.0: 12 ports detected
[    1.044027] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.044030] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.044033] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    1.044061] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[    1.044062] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.044063] usb usb2: Product: xHCI Host Controller
[    1.044064] usb usb2: Manufacturer: Linux 5.0.0-23-generic xhci-hcd
[    1.044065] usb usb2: SerialNumber: 0000:00:14.0
[    1.044140] hub 2-0:1.0: USB hub found
[    1.044149] hub 2-0:1.0: 6 ports detected
[    1.044674] usb: port power management may be unreliable
[    1.044837] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.050216] i8042: Detected active multiplexing controller, rev 1.1
[    1.052065] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.052069] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.052091] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.052106] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.052121] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.052196] mousedev: PS/2 mouse device common for all mice
[    1.052332] rtc_cmos 00:03: RTC can wake from S4
[    1.052795] rtc_cmos 00:03: registered as rtc0
[    1.052806] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.052811] i2c /dev entries driver
[    1.052883] device-mapper: uevent: version 1.0.3
[    1.052932] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    1.052949] platform eisa.0: Probing EISA bus 0
[    1.052950] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.052951] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.052952] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.052953] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.052953] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.052954] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.052955] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.052956] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.052957] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.052957] platform eisa.0: EISA: Detected 0 cards
[    1.052960] intel_pstate: Intel P-state driver initializing
[    1.053206] intel_pstate: HWP enabled
[    1.053276] ledtrig-cpu: registered to indicate activity on CPUs
[    1.053280] EFI Variables Facility v0.08 2004-May-17
[    1.059583] intel_pmc_core:  initialized
[    1.059732] NET: Registered protocol family 10
[    1.060787] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.063730] Segment Routing with IPv6
[    1.063746] NET: Registered protocol family 17
[    1.063769] Key type dns_resolver registered
[    1.064053] RAS: Correctable Errors collector initialized.
[    1.064078] microcode: sig=0x406e3, pf=0x80, revision=0xcc
[    1.064248] microcode: Microcode Update Driver: v2.2.
[    1.064272] sched_clock: Marking stable (1067769975, -3523842)->(1070675829, -6429696)
[    1.064432] registered taskstats version 1
[    1.064438] Loading compiled-in X.509 certificates
[    1.065647] Loaded X.509 cert 'Build time autogenerated kernel key: caf27ed67be6a8d4c681ef3325a4613a9f2d2943'
[    1.066043] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[    1.066057] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[    1.066232] Couldn't get size: 0x800000000000000e
[    1.066234] MODSIGN: Couldn't get UEFI MokListRT
[    1.066643] zswap: loaded using pool lzo/zbud
[    1.071367] Key type big_key registered
[    1.071370] Key type trusted registered
[    1.073324] Key type encrypted registered
[    1.073342] AppArmor: AppArmor sha1 policy hashing enabled
[    1.074308] ima: Allocated hash algorithm: sha1
[    1.088331] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    1.088332] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    1.098769] No architecture policies found
[    1.098775] evm: Initialising EVM extended attributes:
[    1.098776] evm: security.selinux
[    1.098776] evm: security.SMACK64
[    1.098777] evm: security.SMACK64EXEC
[    1.098777] evm: security.SMACK64TRANSMUTE
[    1.098777] evm: security.SMACK64MMAP
[    1.098777] evm: security.apparmor
[    1.098778] evm: security.ima
[    1.098778] evm: security.capability
[    1.098779] evm: HMAC attrs: 0x1
[    1.099717]   Magic number: 15:402:236
[    1.099770] memory memory114: hash matches
[    1.099914] rtc_cmos 00:03: setting system clock to 2019-08-07T16:12:14 UTC (1565194334)
[    1.100918] Freeing unused decrypted memory: 2040K
[    1.101293] Freeing unused kernel image memory: 2584K
[    1.119495] Write protecting the kernel read-only data: 22528k
[    1.120017] Freeing unused kernel image memory: 2016K
[    1.120316] Freeing unused kernel image memory: 1832K
[    1.127813] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.127814] x86/mm: Checking user space page tables
[    1.134991] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.134993] Run /init as init process
[    1.224530] ahci 0000:00:17.0: version 3.0
[    1.228764] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.234937] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
[    1.234940] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[    1.235909] scsi host0: ahci
[    1.236181] scsi host1: ahci
[    1.241294] scsi host2: ahci
[    1.241352] libphy: r8169: probed
[    1.241371] ata1: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b100 irq 126
[    1.241372] ata2: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b180 irq 126
[    1.241374] ata3: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b200 irq 126
[    1.241655] r8169 0000:03:00.0 eth0: RTL8168g/8111g, ec:aa:a0:2a:ce:3d, XID 4c0, IRQ 127
[    1.241656] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.254341] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    1.288922] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    1.288924] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    1.379491] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    1.492953] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    1.492954] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    1.530375] usb 1-1: New USB device found, idVendor=046d, idProduct=c246, bcdDevice=70.03
[    1.530377] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.530377] usb 1-1: Product: G300s Optical Gaming Mouse
[    1.530378] usb 1-1: Manufacturer: Logitech
[    1.555224] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.556782] ata2.00: ATA-9: SAMSUNG MZNLF128HCHP-00000, FXT2101Q, max UDMA/133
[    1.556784] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.557893] ata2.00: configured for UDMA/133
[    1.559427] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.559441] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.562137] ata3.00: ATAPI: HL-DT-ST DVDRAM GUD0N, 1.00, max UDMA/133
[    1.566949] ata3.00: configured for UDMA/133
[    1.568034] ahci 0000:00:17.0: port does not support device sleep
[    1.606808] ata1.00: ATA-8: TOSHIBA MQ01ABD100M, AX1P1A, max UDMA/100
[    1.606809] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.608836] ata1.00: configured for UDMA/100
[    1.609495] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABD1 1A   PQ: 0 ANSI: 5
[    1.609912] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.609914] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.609925] sd 0:0:0:0: [sda] Write Protect is off
[    1.609926] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.609938] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.609940] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.610122] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG MZNLF128 101Q PQ: 0 ANSI: 5
[    1.610311] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.610313] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.610321] sd 1:0:0:0: [sdb] Write Protect is off
[    1.610322] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.610334] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.611443] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GUD0N     1.00 PQ: 0 ANSI: 5
[    1.612713]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6
[    1.613509] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.659510] usb 1-3: new full-speed USB device number 3 using xhci_hcd
[    1.677140] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.677142] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.677388] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.677519] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    1.696931] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    1.696933] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    1.732766]  sda: sda1 sda2
[    1.733353] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.808523] usb 1-3: New USB device found, idVendor=0d8c, idProduct=000c, bcdDevice= 1.00
[    1.808540] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.808541] usb 1-3: Product: C-Media USB Headphone Set 
[    1.910893] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    1.910894] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    1.935405] usb 1-4: new low-speed USB device number 4 using xhci_hcd
[    2.089158] usb 1-4: New USB device found, idVendor=1a2c, idProduct=2124, bcdDevice= 1.10
[    2.089160] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.089161] usb 1-4: Product: USB Keyboard
[    2.089176] usb 1-4: Manufacturer: SEM
[    2.112936] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    2.112938] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    2.215492] usb 1-5: new high-speed USB device number 5 using xhci_hcd
[    2.364152] usb 1-5: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[    2.364153] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.364154] usb 1-5: Product: USB2.0-CRW
[    2.364155] usb 1-5: Manufacturer: Generic
[    2.364156] usb 1-5: SerialNumber: 20100201396000000
[    2.491489] usb 1-6: new high-speed USB device number 6 using xhci_hcd
[    2.684391] usb 1-6: New USB device found, idVendor=0bda, idProduct=57da, bcdDevice= 0.06
[    2.684392] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.684393] usb 1-6: Product: Integrated Webcam
[    2.684394] usb 1-6: Manufacturer: 0420-00YR10066K0507
[    2.684395] usb 1-6: SerialNumber: 200901010001
[    2.815491] usb 1-8: new full-speed USB device number 7 using xhci_hcd
[    2.893454] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x461f01)
[    2.909387] psmouse serio4: elantech: Synaptics capabilities query result 0x00, 0x16, 0x0d.
[    2.923845] psmouse serio4: elantech: Elan sample query result 01, 7b, 75
[    2.965042] usb 1-8: New USB device found, idVendor=13d3, idProduct=3416, bcdDevice= 2.00
[    2.965044] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.965045] usb 1-8: Product: Bluetooth Radio
[    2.965046] usb 1-8: Manufacturer: Realtek
[    2.965046] usb 1-8: SerialNumber: 00e04c000001
[    2.970392] hidraw: raw HID events driver (C) Jiri Kosina
[    2.975185] usbcore: registered new interface driver rtsx_usb
[    2.977700] usbcore: registered new interface driver usbhid
[    2.977701] usbhid: USB HID core driver
[    2.979373] input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C246.0001/input/input13
[    2.979449] hid-generic 0003:046D:C246.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-1/input0
[    2.979540] input: Logitech G300s Optical Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C246.0002/input/input14
[    3.002106] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input12
[    3.039594] input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C246.0002/input/input15
[    3.039748] hid-generic 0003:046D:C246.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-1/input1
[    3.039888] input: C-Media USB Headphone Set   as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.3/0003:0D8C:000C.0003/input/input16
[    3.099771] hid-generic 0003:0D8C:000C.0003: input,hidraw2: USB HID v1.00 Device [C-Media USB Headphone Set  ] on usb-0000:00:14.0-3/input3
[    3.099909] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:1A2C:2124.0004/input/input17
[    3.159772] hid-generic 0003:1A2C:2124.0004: input,hidraw3: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:14.0-4/input0
[    3.159934] input: SEM USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:1A2C:2124.0005/input/input18
[    3.219710] input: SEM USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:1A2C:2124.0005/input/input19
[    3.219887] hid-generic 0003:1A2C:2124.0005: input,hidraw4: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:14.0-4/input1
[    3.281568] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[    3.413988] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    3.431674] systemd[1]: Detected architecture x86-64.
[    3.434473] systemd[1]: Set hostname to <zoppo>.
[    3.547599] systemd[1]: Created slice System Slice.
[    3.547800] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.547868] systemd[1]: Listening on Journal Socket.
[    3.548369] systemd[1]: Starting Set the console keyboard layout...
[    3.548917] systemd[1]: Mounting POSIX Message Queue File System...
[    3.550355] systemd[1]: Starting Load Kernel Modules...
[    3.551044] systemd[1]: Mounting Huge Pages File System...
[    3.570216] lp: driver loaded but no devices found
[    3.573147] ppdev: user-space parallel port driver
[    3.581941] EXT4-fs (sdb6): re-mounted. Opts: errors=remount-ro
[    3.646740] systemd-journald[324]: Received request to flush runtime journal from PID 1
[    3.670357] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
[    4.324998] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    4.618549] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.641299] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.644220] Bluetooth: Core ver 2.22
[    4.644234] NET: Registered protocol family 31
[    4.644235] Bluetooth: HCI device and connection manager initialized
[    4.644239] Bluetooth: HCI socket layer initialized
[    4.644241] Bluetooth: L2CAP socket layer initialized
[    4.644244] Bluetooth: SCO socket layer initialized
[    4.677173] usbcore: registered new interface driver btusb
[    4.685353] Bluetooth: hci0: RTL: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723

[    4.686348] Bluetooth: hci0: RTL: rom_version status=0 version=1

[    4.686350] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723b_fw.bin

[    4.688869] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723b_config.bin

[    4.688883] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[    4.688887] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496

[    4.692134] usbcore: registered new interface driver snd-usb-audio
[    4.696840] VFIO - User Level meta-driver version: 0.3
[    4.709084] MXM: GUID detected in BIOS
[    4.709146] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20181213/nsarguments-66)
[    4.709264] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20181213/nsarguments-66)
[    4.716171] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[    4.716177] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.RP01.PEGP handle
[    4.716178] nouveau: detected PR support, will not use DSM
[    4.716204] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[    4.716348] checking generic (b0000000 1e0000) vs hw (c0000000 10000000)
[    4.716350] checking generic (b0000000 1e0000) vs hw (d0000000 2000000)
[    4.716437] nouveau 0000:01:00.0: NVIDIA GM107 (1171a0a2)
[    4.721043] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    4.726166] media: Linux media interface: v0.10
[    4.727486] rtl8723be 0000:02:00.0: enabling device (0000 -> 0003)
[    4.747074] videodev: Linux video capture interface: v2.00
[    4.747211] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin
[    4.772359] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    4.772731] rtlwifi: rtlwifi: wireless switch is on
[    4.792694] checking generic (b0000000 1e0000) vs hw (b0000000 10000000)
[    4.792695] fb0: switching to inteldrmfb from EFI VGA
[    4.792721] Console: switching to colour dummy device 80x25
[    4.792860] uvcvideo: Found UVC 1.00 device Integrated Webcam (0bda:57da)
[    4.793589] [drm] Replacing VGA console driver
[    4.824521] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
[    4.824523] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
[    4.824525] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[    4.825501] input: Integrated Webcam: Integrated W as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input20
[    4.826880] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.826881] [drm] Driver supports precise vblank timestamp query.
[    4.827614] usbcore: registered new interface driver uvcvideo
[    4.827615] USB Video Class driver (1.1.1)
[    4.843834] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    4.843835] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    4.843836] RAPL PMU: hw unit of domain package 2^-14 Joules
[    4.843837] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    4.843838] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    4.843838] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    4.850932] cryptd: max_cpu_qlen set to 1000
[    4.851568] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.852361] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[    4.867167] AVX2 version of gcm_enc/dec engaged.
[    4.867168] AES CTR mode by8 optimization enabled
[    4.901460] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0
[    5.033967] intel_rapl: Found RAPL domain package
[    5.033969] intel_rapl: Found RAPL domain core
[    5.033970] intel_rapl: Found RAPL domain uncore
[    5.033971] intel_rapl: Found RAPL domain dram
[    5.112496] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.112997] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21
[    5.150503] rtl8723be 0000:02:00.0 wlp2s0: renamed from wlan0
[    5.245439] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    5.245490] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:23/LNXVIDEO:01/input/input22
[    5.245608] snd_hda_intel 0000:00:1f.3: Linked as a consumer to 0000:00:02.0
[    5.245664] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.245666] nouveau 0000:01:00.0: bios: version 82.07.7d.00.26
[    5.251723] fbcon: inteldrmfb (fb0) is primary device
[    5.251796] Console: switching to colour frame buffer device 240x67
[    5.251832] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.330885] nouveau 0000:01:00.0: fb: 4096 MiB DDR3
[    5.330903] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 022554 [ IBUS ]
[    5.345570] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 10ac08 [ IBUS ]
[    5.394904] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    5.394908] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.394909] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    5.394911] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    5.394912] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.394913] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[    5.394915] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    5.412880] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    5.412932] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[    5.412982] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[    5.413028] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[    5.413085] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[    5.413140] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[    5.413189] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[    6.645711] vga_switcheroo: enabled
[    6.645773] [TTM] Zone  kernel: Available graphics memory: 8103918 kiB
[    6.645774] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    6.645774] [TTM] Initializing pool allocator
[    6.645777] [TTM] Initializing DMA pool allocator
[    6.645788] nouveau 0000:01:00.0: DRM: VRAM: 4096 MiB
[    6.645789] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    6.645791] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
[    6.645792] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    6.646584] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[    6.646764] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[    6.720576] audit: type=1400 audit(1565194340.116:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=970 comm="apparmor_parser"
[    6.720840] audit: type=1400 audit(1565194340.116:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=969 comm="apparmor_parser"
[    6.720843] audit: type=1400 audit(1565194340.116:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=969 comm="apparmor_parser"
[    6.720844] audit: type=1400 audit(1565194340.116:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=969 comm="apparmor_parser"
[    6.722347] audit: type=1400 audit(1565194340.116:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=971 comm="apparmor_parser"
[    6.724147] audit: type=1400 audit(1565194340.120:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=973 comm="apparmor_parser"
[    6.724301] audit: type=1400 audit(1565194340.120:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=967 comm="apparmor_parser"
[    6.724304] audit: type=1400 audit(1565194340.120:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=967 comm="apparmor_parser"
[    6.724306] audit: type=1400 audit(1565194340.120:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=967 comm="apparmor_parser"
[    6.724308] audit: type=1400 audit(1565194340.120:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=967 comm="apparmor_parser"
[    6.938165] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.938170] Bluetooth: BNEP filters: protocol multicast
[    6.938174] Bluetooth: BNEP socket layer initialized
[    7.119904] Generic PHY r8169-300:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[    7.254047] r8169 0000:03:00.0 enp3s0: Link is Down
[    9.077823] wlp2s0: authenticate with 64:20:9f:0d:9d:34
[    9.088002] wlp2s0: send auth to 64:20:9f:0d:9d:34 (try 1/3)
[    9.089533] wlp2s0: authenticated
[    9.091423] wlp2s0: associate with 64:20:9f:0d:9d:34 (try 1/3)
[    9.094735] wlp2s0: RX AssocResp from 64:20:9f:0d:9d:34 (capab=0x431 status=0 aid=64)
[    9.095019] wlp2s0: associated
[    9.119154] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[    9.134982] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx
[    9.135012] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[  699.726494] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 619444 [ IBUS ]
[  700.950779] Bluetooth: RFCOMM TTY layer initialized
[  700.950785] Bluetooth: RFCOMM socket layer initialized
[  700.950791] Bluetooth: RFCOMM ver 1.11
[  702.032676] rfkill: input handler disabled
zoppo@zoppo:/media/zoppo/767A73167A72D27B$



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 07 Ağustos 2019 - 19:33:13
[mention=648323]@cosmicowl[/mention]

Error while deleting.
You do not have sufficident permissions to delete the file "output.avi".

Show more details.
Failed to delete the item from the trash.

bu geri dönüşüm kutusundakini silerken karşıma çıkıyor.


windows ve ubuntu c üzerine kurulu ssd üzerinde .
d/ sürücüsü ntfs formatlı depolama alanım sadece .

kopyalama işleminde hata vermiyor. şöyle söyleyeyim sağ tık yaptığımda "new folder"  "paste" " delete "  "cut" "move to.."  "rename"  butonları aktif değil









Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 07 Ağustos 2019 - 20:21:09
mkdir: cannot create directory 'yeni': Read-only file system

terminal üzerinden dosya eklememe izin yok sadece okuma olarak açılmış görünüyor.

[gecegezen]

Acaba size bahsetdiğim windows altından hızlı baslat olayını kontrol ettiniz mi? Birde bu dmesg çıktısı silmeyi denedikten sonra mı kopyaladınız.

Birde ufak bir rica komut çıktılarını code etiketi ile kullanırsanız okması sayfa acısından daha kolay olur.

Hızlı başlat kısmının nasıl yapıldığı
https://www.technopat.net/2014/11/06/windows-8-1-hizli-baslat-secenegi-nasil-devre-disi-birakilir/

[A.t.a.2344]

Acaba size bahsetdiğim windows altından hızlı baslat olayını kontrol ettiniz mi? Birde bu dmesg çıktısı silmeyi denedikten sonra mı kopyaladınız.

Birde ufak bir rica komut çıktılarını code etiketi ile kullanırsanız okması sayfa acısından daha kolay olur.

Hızlı başlat kısmının nasıl yapıldığı
https://www.technopat.net/2014/11/06/windows-8-1-hizli-baslat-secenegi-nasil-devre-disi-birakilir/

hızlı başlatı kaldırıp girdim ubuntuya sorun çözülmüş teşekkür ederim