Kablolu Ağ Kaybi

[hadjieff]

Selamlar. eskiden kurulu olan ubuntuda sorun yoktu, bazi degisikliklerden dolayi baska pc-nin ubuntusunun imagesini kendi pc-me kurdum. ondan sonra kablolu baglantida gun icinde 3-5 kere kaybolmalar basladi. pcdebaska ethernet card yok. sadece ana kartinki. isiklari calistigi halde bile baska pcden ping attigimda agda gozukmuyor. Sorun surucudemi bilemedim. imagesini aldigim pc-nin anakarti baska bu baska. wi-fi yok. static ip kullaniyorum. 1.91
forumdaki diger konulara da baktim. belki farkli biseydir diye hic bi sey yapmadim.

Kod Seç Genişlet

cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.04
DISTRIB_CODENAME=precise
DISTRIB_DESCRIPTION="Ubuntu 12.04.5 LTS"

Kod Seç Genişlet

uname -a
Linux atrium-System-Product-Name 3.2.0-126-generic-pae #169-Ubuntu SMP Fri Mar 31 14:43:09 UTC 2017 i686 athlon i386 GNU/Linux

Kod Seç Genişlet

lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7480D]
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0)
00:15.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 2)
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)

Kod Seç Genişlet

sudo lshw -C network
  *-network
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: eth0
       version: 0c
       serial: e0:3f:49:6d:06:b4
       size: 100Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=192.168.1.91 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
       resources: irq:41 ioport:e000(size=256) memory:fea00000-fea00fff memory:f0000000-f0003fff

Kod Seç Genişlet

ifconfig
eth0      Link encap:Ethernet  HWaddr e0:3f:49:6d:06:b4
          inet addr:192.168.1.91  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::e23f:49ff:fe6d:6b4/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:118751 errors:0 dropped:8479 overruns:0 frame:0
          TX packets:15916 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:9183131 (9.1 MB)  TX bytes:1613139 (1.6 MB)
          Interrupt:41 Base address:0xa000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:56884 errors:0 dropped:0 overruns:0 frame:0
          TX packets:56884 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:11982373 (11.9 MB)  TX bytes:11982373 (11.9 MB)

Kod Seç Genişlet

lsmod
Module                  Size  Used by
vesafb                 13516  1
ipheth                 13278  0
eeepc_wmi              12949  0
usblp                  17885  0
asus_wmi               19624  1 eeepc_wmi
sparse_keymap          13658  1 asus_wmi
snd_hda_codec_realtek   174385  1
snd_usb_audio         102445  0
uvcvideo               67203  1
snd_hda_intel          32719  0
snd_hda_codec         109562  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13276  2 snd_usb_audio,snd_hda_codec
videodev               86588  2 uvcvideo
snd_usbmidi_lib        24647  1 snd_usb_audio
snd_pcm                80916  3 snd_usb_audio,snd_hda_intel,snd_hda_codec
snd_seq_midi           13132  0
psmouse                87142  0
serio_raw              13027  0
snd_rawmidi            25832  2 snd_usbmidi_lib,snd_seq_midi
snd_seq_midi_event     14475  1 snd_seq_midi
k10temp                12990  0
snd_seq                51677  2 snd_seq_midi,snd_seq_midi_event
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq
snd_timer              28983  2 snd_pcm,snd_seq
video                  19115  0
wmi                    18744  1 asus_wmi
mac_hid                13077  0
snd                    62250  11 snd_hda_codec_realtek,snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_usbmidi_lib,snd_pcm,snd_rawmidi,snd_seq,snd_seq_device,snd_timer
bnep                   17830  2
rfcomm                 38139  0
bluetooth             158410  10 bnep,rfcomm
parport_pc             32114  1
ppdev                  12849  0
binfmt_misc            17292  1
shpchp                 32265  0
i2c_piix4              13093  0
soundcore              14635  1 snd
snd_page_alloc         14108  2 snd_hda_intel,snd_pcm
lp                     17455  0
parport                40930  3 parport_pc,ppdev,lp
usbhid                 41937  0
hid                    81731  1 usbhid
r8169                  56396  0

Kod Seç Genişlet

dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-126-generic-pae (buildd@lgw01-15) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #169-Ubuntu SMP Fri Mar 31 14:43:09 UTC 2017 (Ubuntu 3.2.0-126.169-generic-pae 3.2.79)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000005c382000 (usable)
[    0.000000]  BIOS-e820: 000000005c382000 - 000000005c3b2000 (reserved)
[    0.000000]  BIOS-e820: 000000005c3b2000 - 000000005c3c2000 (ACPI data)
[    0.000000]  BIOS-e820: 000000005c3c2000 - 000000005c721000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000005c721000 - 000000005d589000 (reserved)
[    0.000000]  BIOS-e820: 000000005d589000 - 000000005d58a000 (usable)
[    0.000000]  BIOS-e820: 000000005d58a000 - 000000005d790000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000005d790000 - 000000005dbc6000 (usable)
[    0.000000]  BIOS-e820: 000000005dbc6000 - 000000005dff4000 (reserved)
[    0.000000]  BIOS-e820: 000000005dff4000 - 000000005e000000 (usable)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: System manufacturer System Product Name/A55BM-E, BIOS 0902 11/14/2013
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x5e000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 00005E000000 mask FFFFFE000000 uncachable
[    0.000000]   2 base 000060000000 mask FFFFE0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 1504MB, range: 32MB, type UC
[    0.000000] reg 2, base: 1536MB, range: 512MB, type UC
[    0.000000] total RAM covered: 1504M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 64M         num_reg: 3      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 1GB, type WB
[    0.000000] reg 1, base: 1GB, range: 512MB, type WB
[    0.000000] reg 2, base: 1504MB, range: 32MB, type UC
[    0.000000] found SMP MP-table at [c00fd7b0] fd7b0
[    0.000000] initial memory mapped : 0 - 02000000
[    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037a00000 page 2M
[    0.000000]  0037a00000 - 0037bfe000 page 4k
[    0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffa000-2000000
[    0.000000] RAMDISK: 364d4000 - 37262000
[    0.000000] ACPI: RSDP 0x00000000000F0490 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x000000005C3BA078 00064 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000005C3C0C68 0010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110623/tbfadt-288)
[    0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
[    0.000000] ACPI: DSDT 0x000000005C3BA170 06AF8 (v02 ALASKA A M I    00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x000000005C716080 00040
[    0.000000] ACPI: APIC 0x000000005C3C0D78 00072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000005C3C0DF0 00044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000005C3C0E38 0003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x000000005C3C0E78 00038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: BGRT 0x000000005C3C1A78 00038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000005C3C0F08 006B2 (v01 AMD    BANTRY   00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x000000005C3C15C0 004B7 (v02 AMD    BANTRY   00000001 MSFT 04000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 612MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00037bfe
[    0.000000]   HighMem  0x00037bfe -> 0x0005e000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x0005c382
[    0.000000]     0: 0x0005d589 -> 0x0005d58a
[    0.000000]     0: 0x0005d790 -> 0x0005dbc6
[    0.000000]     0: 0x0005dff4 -> 0x0005e000
[    0.000000] On node 0 totalpages: 378707
[    0.000000] free_area_init_node: node 0, pgdat c1881e80, node_mem_map f5914200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3950 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1225 pages used for memmap
[    0.000000]   HighMem zone: 149246 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x15] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 5e000000 (gap: 5e000000:a0c00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f7bbc000 s34304 r0 d23040 u57344
[    0.000000] pcpu-alloc: s34304 r0 d23040 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 375698
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-126-generic-pae root=UUID=b3369f17-9ff5-4df6-ad5a-d4c333f3cf79 ro
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] allocated 6160128 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0005e000)
[    0.000000] Memory: 1471356k/1540096k available (5890k kernel code, 43472k reserved, 2874k data, 752k init, 601884k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc1890000 - 0xc194c000   ( 752 kB)
[    0.000000]       .data : 0xc15c0b88 - 0xc188f740   (2874 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15c0b88   (5890 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:712 16
[    0.000000] CPU 0 irqstacks, hard=f540a000 soft=f540c000
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2992.437 MHz processor.
[    0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.87 BogoMIPS (lpj=11969748)
[    0.004009] pid_max: default: 32768 minimum: 301
[    0.004029] Security Framework initialized
[    0.004043] AppArmor: AppArmor initialized
[    0.004046] Yama: becoming mindful.
[    0.004088] Mount-cache hash table entries: 512
[    0.004185] Initializing cgroup subsys cpuacct
[    0.004192] Initializing cgroup subsys memory
[    0.004200] Initializing cgroup subsys devices
[    0.004203] Initializing cgroup subsys freezer
[    0.004206] Initializing cgroup subsys blkio
[    0.004212] Initializing cgroup subsys perf_event
[    0.004234] CPU: Physical Processor ID: 0
[    0.004237] CPU: Processor Core ID: 0
[    0.004241] mce: CPU supports 7 MCE banks
[    0.009084] ACPI: Core revision 20110623
[    0.012008] ftrace: allocating 26261 entries in 52 pages
[    0.016052] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.016367] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.056394] CPU0: AMD A4-4000 APU with Radeon(tm) HD Graphics     stepping 01
[    0.060003] Performance Events: AMD Family 15h PMU driver.
[    0.060003] ... version:                0
[    0.060003] ... bit width:              48
[    0.060003] ... generic registers:      6
[    0.060003] ... value mask:             0000ffffffffffff
[    0.060003] ... max period:             00007fffffffffff
[    0.060003] ... fixed-purpose events:   0
[    0.060003] ... event mask:             000000000000003f
[    0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.060003] CPU 1 irqstacks, hard=f54d2000 soft=f54d4000
[    0.060003] Booting Node   0, Processors  #1
[    0.060003] smpboot cpu 1: start_ip = 9a000
[    0.008000] Initializing CPU#1
[    0.008000] calibrate_delay_direct() ignoring timer_rate as we had a TSC wrap around start=4287059253 >=post_end=16030541
[    0.148028] NMI watchdog enabled, takes one hw-pmu counter.
[    0.148065] Brought up 2 CPUs
[    0.148069] Total of 2 processors activated (11969.56 BogoMIPS).
[    0.148459] devtmpfs: initialized
[    0.148459] EVM: security.selinux
[    0.148459] EVM: security.SMACK64
[    0.148459] EVM: security.capability
[    0.148459] PM: Registering ACPI NVS region at 5c3c2000 (3534848 bytes)
[    0.148459] PM: Registering ACPI NVS region at 5d58a000 (2121728 bytes)
[    0.149020] print_constraints: dummy:
[    0.149046] RTC time:  9:11:10, date: 03/14/19
[    0.149076] NET: Registered protocol family 16
[    0.149101] Trying to unpack rootfs image as initramfs...
[    0.149196] EISA bus registered
[    0.149284] Extended Config Space enabled on 0 nodes
[    0.149300] ACPI: bus type pci registered
[    0.149374] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.149382] PCI: not using MMCONFIG
[    0.158290] PCI: Using configuration type 1 for base access
[    0.158296] PCI: Using configuration type 1 for extended access
[    0.164082] bio: create slab <bio-0> at 0
[    0.164188] ACPI: Added _OSI(Module Device)
[    0.164192] ACPI: Added _OSI(Processor Device)
[    0.164196] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.164201] ACPI: Added _OSI(Processor Aggregator Device)
[    0.165327] ACPI: EC: Look up EC in DSDT
[    0.166713] ACPI: Executed 1 blocks of module-level executable AML code
[    0.169680] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.170231] ACPI: Interpreter enabled
[    0.170241] ACPI: (supports S0 S3 S4 S5)
[    0.170264] ACPI: Using IOAPIC for interrupt routing
[    0.170414] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.170461] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.170467] PCI: Using MMCONFIG for extended config space
[    0.204716] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.206614] ACPI: No dock devices found.
[    0.206619] HEST: Table not found.
[    0.206625] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.206903] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.207180] pci_root PNP0A03:00: host bridge window [io  0x0000-0x03af]
[    0.207186] pci_root PNP0A03:00: host bridge window [io  0x03e0-0x0cf7]
[    0.207191] pci_root PNP0A03:00: host bridge window [io  0x03b0-0x03df]
[    0.207196] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.207201] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.207207] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[    0.207213] pci_root PNP0A03:00: host bridge window [mem 0x7f000000-0xffffffff]
[    0.207231] pci 0000:00:00.0: [1022:1410] type 0 class 0x000600
[    0.207294] pci 0000:00:01.0: [1002:9993] type 0 class 0x000300
[    0.207305] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[    0.207313] pci 0000:00:01.0: reg 14: [io  0xf000-0xf0ff]
[    0.207321] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
[    0.207374] pci 0000:00:01.0: supports D1 D2
[    0.207415] pci 0000:00:11.0: [1022:7801] type 0 class 0x000106
[    0.207436] pci 0000:00:11.0: reg 10: [io  0xf140-0xf147]
[    0.207447] pci 0000:00:11.0: reg 14: [io  0xf130-0xf133]
[    0.207457] pci 0000:00:11.0: reg 18: [io  0xf120-0xf127]
[    0.207468] pci 0000:00:11.0: reg 1c: [io  0xf110-0xf113]
[    0.207478] pci 0000:00:11.0: reg 20: [io  0xf100-0xf10f]
[    0.207492] pci 0000:00:11.0: reg 24: [mem 0xfeb4a000-0xfeb4a7ff]
[    0.207562] pci 0000:00:12.0: [1022:7807] type 0 class 0x000c03
[    0.207577] pci 0000:00:12.0: reg 10: [mem 0xfeb49000-0xfeb49fff]
[    0.207656] pci 0000:00:12.2: [1022:7808] type 0 class 0x000c03
[    0.207678] pci 0000:00:12.2: reg 10: [mem 0xfeb48000-0xfeb480ff]
[    0.207768] pci 0000:00:12.2: supports D1 D2
[    0.207770] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.207775] pci 0000:00:12.2: PME# disabled
[    0.207798] pci 0000:00:13.0: [1022:7807] type 0 class 0x000c03
[    0.207813] pci 0000:00:13.0: reg 10: [mem 0xfeb47000-0xfeb47fff]
[    0.207893] pci 0000:00:13.2: [1022:7808] type 0 class 0x000c03
[    0.207918] pci 0000:00:13.2: reg 10: [mem 0xfeb46000-0xfeb460ff]
[    0.208018] pci 0000:00:13.2: supports D1 D2
[    0.208021] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.208025] pci 0000:00:13.2: PME# disabled
[    0.208049] pci 0000:00:14.0: [1022:780b] type 0 class 0x000c05
[    0.208133] pci 0000:00:14.2: [1022:780d] type 0 class 0x000403
[    0.208157] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
[    0.208229] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.208233] pci 0000:00:14.2: PME# disabled
[    0.208247] pci 0000:00:14.3: [1022:780e] type 0 class 0x000601
[    0.208334] pci 0000:00:14.4: [1022:780f] type 1 class 0x000604
[    0.208394] pci 0000:00:15.0: [1022:43a0] type 1 class 0x000604
[    0.208479] pci 0000:00:15.0: supports D1 D2
[    0.208481] pci 0000:00:15.0: PME# supported from D0 D3hot D3cold
[    0.208485] pci 0000:00:15.0: PME# disabled
[    0.208514] pci 0000:00:15.2: [1022:43a2] type 1 class 0x000604
[    0.208606] pci 0000:00:15.2: supports D1 D2
[    0.208609] pci 0000:00:15.2: PME# supported from D0 D3hot D3cold
[    0.208614] pci 0000:00:15.2: PME# disabled
[    0.208644] pci 0000:00:16.0: [1022:7807] type 0 class 0x000c03
[    0.208659] pci 0000:00:16.0: reg 10: [mem 0xfeb45000-0xfeb45fff]
[    0.208739] pci 0000:00:16.2: [1022:7808] type 0 class 0x000c03
[    0.208760] pci 0000:00:16.2: reg 10: [mem 0xfeb44000-0xfeb440ff]
[    0.208854] pci 0000:00:16.2: supports D1 D2
[    0.208857] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.208863] pci 0000:00:16.2: PME# disabled
[    0.208887] pci 0000:00:18.0: [1022:1400] type 0 class 0x000600
[    0.208921] pci 0000:00:18.1: [1022:1401] type 0 class 0x000600
[    0.208949] pci 0000:00:18.2: [1022:1402] type 0 class 0x000600
[    0.208979] pci 0000:00:18.3: [1022:1403] type 0 class 0x000600
[    0.209017] pci 0000:00:18.4: [1022:1404] type 0 class 0x000600
[    0.209045] pci 0000:00:18.5: [1022:1405] type 0 class 0x000600
[    0.209142] pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
[    0.209155] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af] (subtractive decode)
[    0.209158] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
[    0.209160] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df] (subtractive decode)
[    0.209163] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.209166] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.209168] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.209171] pci 0000:00:14.4:   bridge window [mem 0x7f000000-0xffffffff] (subtractive decode)
[    0.209229] pci 0000:00:15.0: PCI bridge to [bus 02-02]
[    0.209319] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[    0.209341] pci 0000:03:00.0: reg 10: [io  0xe000-0xe0ff]
[    0.209379] pci 0000:03:00.0: reg 18: [mem 0xfea00000-0xfea00fff 64bit]
[    0.209401] pci 0000:03:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.209489] pci 0000:03:00.0: supports D1 D2
[    0.209491] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.209497] pci 0000:03:00.0: PME# disabled
[    0.216041] pci 0000:00:15.2: PCI bridge to [bus 03-03]
[    0.216054] pci 0000:00:15.2:   bridge window [io  0xe000-0xefff]
[    0.216059] pci 0000:00:15.2:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.216066] pci 0000:00:15.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.216086] pci_bus 0000:00: on NUMA node 0
[    0.216093] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.216364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT]
[    0.216421] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[    0.216457] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[    0.216583]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.216847]  pci0000:00: ACPI _OSC control (0x18) granted
[    0.222426] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 6 7 10 11 14 15) *0
[    0.222498] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 6 7 10 11 14 15) *0
[    0.222567] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 6 7 10 11 14 15) *0
[    0.222634] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0
[    0.222699] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 6 7 10 11 14 15) *0
[    0.222742] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0
[    0.222785] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 6 7 10 11 14 15) *0
[    0.222827] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0
[    0.222945] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.222963] vgaarb: loaded
[    0.222968] vgaarb: bridge control possible 0000:00:01.0
[    0.223094] i2c-core: driver [aat2870] using legacy suspend method
[    0.223098] i2c-core: driver [aat2870] using legacy resume method
[    0.223173] SCSI subsystem initialized
[    0.223227] libata version 3.00 loaded.
[    0.223274] usbcore: registered new interface driver usbfs
[    0.223290] usbcore: registered new interface driver hub
[    0.223324] usbcore: registered new device driver usb
[    0.223411] PCI: Using ACPI for IRQ routing
[    0.225694] PCI: pci_cache_line_size set to 64 bytes
[    0.225773] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[    0.225775] reserve RAM buffer: 000000005c382000 - 000000005fffffff
[    0.225778] reserve RAM buffer: 000000005d58a000 - 000000005fffffff
[    0.225781] reserve RAM buffer: 000000005dbc6000 - 000000005fffffff
[    0.225783] reserve RAM buffer: 000000005e000000 - 000000005fffffff
[    0.225900] NetLabel: Initializing
[    0.225904] NetLabel:  domain hash size = 128
[    0.225907] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.225919] NetLabel:  unlabeled traffic allowed by default
[    0.225981] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.225988] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.228019] Switching to clocksource hpet
[    0.235390] AppArmor: AppArmor Filesystem Enabled
[    0.235425] pnp: PnP ACPI init
[    0.235443] ACPI: bus type pnp registered
[    0.235628] pnp 00:00: [bus 00-ff]
[    0.235632] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.235634] pnp 00:00: [io  0x0000-0x03af window]
[    0.235637] pnp 00:00: [io  0x03e0-0x0cf7 window]
[    0.235639] pnp 00:00: [io  0x03b0-0x03df window]
[    0.235642] pnp 00:00: [io  0x0d00-0xffff window]
[    0.235644] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.235647] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.235649] pnp 00:00: [mem 0x7f000000-0xffffffff window]
[    0.235652] pnp 00:00: [mem 0x00000000 window]
[    0.235706] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.235741] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[    0.235788] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.235794] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.235923] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    0.235925] pnp 00:02: [io  0x0300-0x031f]
[    0.235927] pnp 00:02: [io  0x0290-0x029f]
[    0.235929] pnp 00:02: [io  0x0230-0x023f]
[    0.235974] system 00:02: [io  0x0300-0x031f] has been reserved
[    0.235981] system 00:02: [io  0x0290-0x029f] has been reserved
[    0.235986] system 00:02: [io  0x0230-0x023f] has been reserved
[    0.235992] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.236389] pnp 00:03: [io  0x0378-0x037f]
[    0.236399] pnp 00:03: [irq 5]
[    0.236401] pnp 00:03: [dma 0 disabled]
[    0.236541] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.236553] pnp 00:04: [dma 4]
[    0.236555] pnp 00:04: [io  0x0000-0x000f]
[    0.236557] pnp 00:04: [io  0x0081-0x0083]
[    0.236559] pnp 00:04: [io  0x0087]
[    0.236561] pnp 00:04: [io  0x0089-0x008b]
[    0.236563] pnp 00:04: [io  0x008f]
[    0.236566] pnp 00:04: [io  0x00c0-0x00df]
[    0.236597] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.236611] pnp 00:05: [io  0x0070-0x0071]
[    0.236616] pnp 00:05: [irq 8]
[    0.236645] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.236653] pnp 00:06: [io  0x0061]
[    0.236678] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.236760] pnp 00:07: [io  0x0010-0x001f]
[    0.236763] pnp 00:07: [io  0x0022-0x003f]
[    0.236765] pnp 00:07: [io  0x0044-0x005f]
[    0.236767] pnp 00:07: [io  0x0072-0x007f]
[    0.236768] pnp 00:07: [io  0x0080]
[    0.236770] pnp 00:07: [io  0x0084-0x0086]
[    0.236772] pnp 00:07: [io  0x0088]
[    0.236774] pnp 00:07: [io  0x008c-0x008e]
[    0.236776] pnp 00:07: [io  0x0090-0x009f]
[    0.236777] pnp 00:07: [io  0x00a2-0x00bf]
[    0.236779] pnp 00:07: [io  0x00e0-0x00ef]
[    0.236781] pnp 00:07: [io  0x04d0-0x04d1]
[    0.236828] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.236834] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.236843] pnp 00:08: [io  0x00f0-0x00ff]
[    0.236848] pnp 00:08: [irq 13]
[    0.236884] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.236939] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.237226] pnp 00:0a: [io  0x03f8-0x03ff]
[    0.237231] pnp 00:0a: [irq 4]
[    0.237233] pnp 00:0a: [dma 0 disabled]
[    0.237294] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.237507] pnp 00:0b: [io  0x0010-0x001f]
[    0.237509] pnp 00:0b: [io  0x0022-0x003f]
[    0.237511] pnp 00:0b: [io  0x0063]
[    0.237513] pnp 00:0b: [io  0x0065]
[    0.237515] pnp 00:0b: [io  0x0067-0x006f]
[    0.237517] pnp 00:0b: [io  0x0072-0x007f]
[    0.237519] pnp 00:0b: [io  0x0080]
[    0.237521] pnp 00:0b: [io  0x0084-0x0086]
[    0.237523] pnp 00:0b: [io  0x0088]
[    0.237525] pnp 00:0b: [io  0x008c-0x008e]
[    0.237527] pnp 00:0b: [io  0x0090-0x009f]
[    0.237528] pnp 00:0b: [io  0x00a2-0x00bf]
[    0.237530] pnp 00:0b: [io  0x00b1]
[    0.237532] pnp 00:0b: [io  0x00e0-0x00ef]
[    0.237534] pnp 00:0b: [io  0x04d0-0x04d1]
[    0.237536] pnp 00:0b: [io  0x040b]
[    0.237538] pnp 00:0b: [io  0x04d6]
[    0.237540] pnp 00:0b: [io  0x0c00-0x0c01]
[    0.237542] pnp 00:0b: [io  0x0c14]
[    0.237543] pnp 00:0b: [io  0x0c50-0x0c51]
[    0.237545] pnp 00:0b: [io  0x0c52]
[    0.237547] pnp 00:0b: [io  0x0c6c]
[    0.237549] pnp 00:0b: [io  0x0c6f]
[    0.237550] pnp 00:0b: [io  0x0cd0-0x0cd1]
[    0.237552] pnp 00:0b: [io  0x0cd2-0x0cd3]
[    0.237554] pnp 00:0b: [io  0x0cd4-0x0cd5]
[    0.237556] pnp 00:0b: [io  0x0cd6-0x0cd7]
[    0.237559] pnp 00:0b: [io  0x0cd8-0x0cdf]
[    0.237561] pnp 00:0b: [io  0x0800-0x089f]
[    0.237564] pnp 00:0b: [io  0x0000-0xffffffffffffffff disabled]
[    0.237566] pnp 00:0b: [io  0x0000-0x000f]
[    0.237568] pnp 00:0b: [io  0x0b20-0x0b3f]
[    0.237570] pnp 00:0b: [io  0x0900-0x090f]
[    0.237572] pnp 00:0b: [io  0x0910-0x091f]
[    0.237573] pnp 00:0b: [io  0xfe00-0xfefe]
[    0.237576] pnp 00:0b: [io  0x0060-0x005f disabled]
[    0.237578] pnp 00:0b: [io  0x0064-0x0063 disabled]
[    0.237580] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[    0.237582] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[    0.237584] pnp 00:0b: [mem 0xfed80000-0xfed8ffff]
[    0.237586] pnp 00:0b: [mem 0xfed61000-0xfed70fff]
[    0.237588] pnp 00:0b: [mem 0xfec10000-0xfec10fff]
[    0.237590] pnp 00:0b: [mem 0xfed00000-0xfed00fff]
[    0.237592] pnp 00:0b: [mem 0xff000000-0xffffffff]
[    0.237667] system 00:0b: [io  0x04d0-0x04d1] has been reserved
[    0.237672] system 00:0b: [io  0x040b] has been reserved
[    0.237677] system 00:0b: [io  0x04d6] has been reserved
[    0.237681] system 00:0b: [io  0x0c00-0x0c01] has been reserved
[    0.237686] system 00:0b: [io  0x0c14] has been reserved
[    0.237690] system 00:0b: [io  0x0c50-0x0c51] has been reserved
[    0.237695] system 00:0b: [io  0x0c52] has been reserved
[    0.237699] system 00:0b: [io  0x0c6c] has been reserved
[    0.237704] system 00:0b: [io  0x0c6f] has been reserved
[    0.237708] system 00:0b: [io  0x0cd0-0x0cd1] has been reserved
[    0.237713] system 00:0b: [io  0x0cd2-0x0cd3] has been reserved
[    0.237719] system 00:0b: [io  0x0cd4-0x0cd5] has been reserved
[    0.237724] system 00:0b: [io  0x0cd6-0x0cd7] has been reserved
[    0.237728] system 00:0b: [io  0x0cd8-0x0cdf] has been reserved
[    0.237733] system 00:0b: [io  0x0800-0x089f] could not be reserved
[    0.237739] system 00:0b: [io  0x0b20-0x0b3f] has been reserved
[    0.237745] system 00:0b: [io  0x0900-0x090f] has been reserved
[    0.237750] system 00:0b: [io  0x0910-0x091f] has been reserved
[    0.237755] system 00:0b: [io  0xfe00-0xfefe] has been reserved
[    0.237763] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.237768] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.237774] system 00:0b: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.237779] system 00:0b: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.237785] system 00:0b: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.237791] system 00:0b: [mem 0xfed00000-0xfed00fff] has been reserved
[    0.237796] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[    0.237803] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.237906] pnp 00:0c: [mem 0x5f000000-0x7effffff]
[    0.237954] system 00:0c: [mem 0x5f000000-0x7effffff] could not be reserved
[    0.237960] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.238006] pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.238065] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.238220] pnp 00:0e: [mem 0xfed00000-0xfed003ff]
[    0.238259] pnp 00:0e: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.238265] pnp: PnP ACPI: found 15 devices
[    0.238269] ACPI: ACPI bus type pnp unregistered
[    0.238274] PnPBIOS: Disabled by ACPI PNP
[    0.274510] PCI: max bus depth: 1 pci_try_num: 2
[    0.274537] pci 0000:00:14.4: PCI bridge to [bus 01-01]
[    0.274556] pci 0000:00:15.0: PCI bridge to [bus 02-02]
[    0.274570] pci 0000:00:15.2: PCI bridge to [bus 03-03]
[    0.274576] pci 0000:00:15.2:   bridge window [io  0xe000-0xefff]
[    0.274584] pci 0000:00:15.2:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.274591] pci 0000:00:15.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.274625] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.274634] pci 0000:00:15.0: setting latency timer to 64
[    0.274641] pci 0000:00:15.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.274650] pci 0000:00:15.2: setting latency timer to 64
[    0.274654] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
[    0.274657] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
[    0.274659] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
[    0.274661] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
[    0.274664] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[    0.274666] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[    0.274669] pci_bus 0000:00: resource 10 [mem 0x7f000000-0xffffffff]
[    0.274672] pci_bus 0000:01: resource 4 [io  0x0000-0x03af]
[    0.274674] pci_bus 0000:01: resource 5 [io  0x03e0-0x0cf7]
[    0.274676] pci_bus 0000:01: resource 6 [io  0x03b0-0x03df]
[    0.274678] pci_bus 0000:01: resource 7 [io  0x0d00-0xffff]
[    0.274681] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff]
[    0.274683] pci_bus 0000:01: resource 9 [mem 0x000c0000-0x000dffff]
[    0.274685] pci_bus 0000:01: resource 10 [mem 0x7f000000-0xffffffff]
[    0.274688] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.274690] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.274693] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.274732] NET: Registered protocol family 2
[    0.276882] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.277106] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.277415] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.277600] TCP: Hash tables configured (established 131072 bind 65536)
[    0.277606] TCP reno registered
[    0.277612] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.277625] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.277718] NET: Registered protocol family 1
[    0.277737] pci 0000:00:01.0: Boot video device
[    0.277757] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.364043] pci 0000:00:12.0: PCI INT A disabled
[    0.364064] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.364089] pci 0000:00:12.2: PCI INT B disabled
[    0.364099] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.444044] pci 0000:00:13.0: PCI INT A disabled
[    0.444069] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.444093] pci 0000:00:13.2: PCI INT B disabled
[    0.444115] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.462570] Freeing initrd memory: 13880k freed
[    0.524105] pci 0000:00:16.0: PCI INT A disabled
[    0.524124] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.524147] pci 0000:00:16.2: PCI INT B disabled
[    0.524163] PCI: CLS 64 bytes, default 64
[    0.524448] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu
[    0.524455] [Firmware Bug]: cpu 1, IBS interrupt offset 0 not available (MSRC001103A=0x0000000000000100)
[    0.524460] Failed to setup IBS, -22
[    0.524640] audit: initializing netlink socket (disabled)
[    0.524654] type=2000 audit(1552554669.524:1): initialized
[    0.542737] highmem bounce pool size: 64 pages
[    0.542744] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.544362] VFS: Disk quotas dquot_6.5.2
[    0.544414] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.544879] fuse init (API version 7.17)
[    0.544965] msgmni has been set to 1725
[    0.545306] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.545337] io scheduler noop registered
[    0.545341] io scheduler deadline registered
[    0.545349] io scheduler cfq registered (default)
[    0.545553] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.545573] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.545576] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.545905] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.545913] ACPI: Power Button [PWRB]
[    0.545950] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.545955] ACPI: Power Button [PWRF]
[    0.546018] ACPI: acpi_idle registered with cpuidle
[    0.608581] ERST: Table is not found!
[    0.608587] GHES: HEST is not enabled!
[    0.608620] isapnp: Scanning for PnP cards...
[    0.608684] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.629083] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.962546] isapnp: No Plug & Play device found
[    1.008666] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.008967] Linux agpgart interface v0.103
[    1.010363] brd: module loaded
[    1.011068] loop: module loaded
[    1.011180] ahci 0000:00:11.0: version 3.0
[    1.011198] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.011243] ahci 0000:00:11.0: irq 40 for MSI/MSI-X
[    1.011332] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.011338] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
[    1.012119] scsi0 : ahci
[    1.012221] scsi1 : ahci
[    1.012300] scsi2 : ahci
[    1.012378] scsi3 : ahci
[    1.012454] scsi4 : ahci
[    1.012531] scsi5 : ahci
[    1.012821] ata1: SATA max UDMA/133 abar m2048@0xfeb4a000 port 0xfeb4a100 irq 40
[    1.012828] ata2: SATA max UDMA/133 abar m2048@0xfeb4a000 port 0xfeb4a180 irq 40
[    1.012833] ata3: SATA max UDMA/133 abar m2048@0xfeb4a000 port 0xfeb4a200 irq 40
[    1.012838] ata4: SATA max UDMA/133 abar m2048@0xfeb4a000 port 0xfeb4a280 irq 40
[    1.012843] ata5: SATA max UDMA/133 abar m2048@0xfeb4a000 port 0xfeb4a300 irq 40
[    1.012848] ata6: SATA max UDMA/133 abar m2048@0xfeb4a000 port 0xfeb4a380 irq 40
[    1.013261] Fixed MDIO Bus: probed
[    1.013281] tun: Universal TUN/TAP device driver, 1.6
[    1.013285] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.013359] PPP generic driver version 2.4.2
[    1.013474] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.013492] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.013515] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    1.013567] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.013576] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.013599] QUIRK: Enable AMD PLL fix
[    1.013609] ehci_hcd 0000:00:12.2: debug port 1
[    1.013633] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb48000
[    1.024091] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.024254] hub 1-0:1.0: USB hub found
[    1.024263] hub 1-0:1.0: 5 ports detected
[    1.024334] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.024357] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.024407] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.024416] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.024436] ehci_hcd 0000:00:13.2: debug port 1
[    1.024451] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb46000
[    1.036094] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.036248] hub 2-0:1.0: USB hub found
[    1.036253] hub 2-0:1.0: 5 ports detected
[    1.036328] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.036350] ehci_hcd 0000:00:16.2: EHCI Host Controller
[    1.036400] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[    1.036409] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.036433] ehci_hcd 0000:00:16.2: debug port 1
[    1.036448] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb44000
[    1.048095] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.048263] hub 3-0:1.0: USB hub found
[    1.048269] hub 3-0:1.0: 4 ports detected
[    1.048339] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.048357] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.048380] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.048435] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[    1.048459] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb49000
[    1.108218] hub 4-0:1.0: USB hub found
[    1.108228] hub 4-0:1.0: 5 ports detected
[    1.108291] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.108314] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.108362] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.108379] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb47000
[    1.168247] hub 5-0:1.0: USB hub found
[    1.168257] hub 5-0:1.0: 5 ports detected
[    1.168322] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.168345] ohci_hcd 0000:00:16.0: OHCI Host Controller
[    1.168395] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 6
[    1.168411] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb45000
[    1.228278] hub 6-0:1.0: USB hub found
[    1.228288] hub 6-0:1.0: 4 ports detected
[    1.228351] uhci_hcd: USB Universal Host Controller Interface driver
[    1.228418] usbcore: registered new interface driver libusual
[    1.228463] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.228857] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.228863] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.228979] mousedev: PS/2 mouse device common for all mice
[    1.229105] rtc_cmos 00:05: RTC can wake from S4
[    1.229195] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.229219] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.229268] device-mapper: uevent: version 1.0.3
[    1.229331] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.229351] EISA: Probing bus 0 at eisa.0
[    1.229356] EISA: Cannot allocate resource for mainboard
[    1.229359] Cannot allocate resource for EISA slot 1
[    1.229362] Cannot allocate resource for EISA slot 2
[    1.229365] Cannot allocate resource for EISA slot 3
[    1.229368] Cannot allocate resource for EISA slot 4
[    1.229371] Cannot allocate resource for EISA slot 5
[    1.229374] Cannot allocate resource for EISA slot 6
[    1.229376] Cannot allocate resource for EISA slot 7
[    1.229379] Cannot allocate resource for EISA slot 8
[    1.229382] EISA: Detected 0 cards.
[    1.229391] cpufreq-nforce2: No nForce2 chipset.
[    1.229431] cpuidle: using governor ladder
[    1.229497] cpuidle: using governor menu
[    1.229500] EFI Variables Facility v0.08 2004-May-17
[    1.229697] TCP cubic registered
[    1.229796] NET: Registered protocol family 10
[    1.230231] NET: Registered protocol family 17
[    1.230237] Registering the dns_resolver key type
[    1.230254] Using IPI No-Shortcut mode
[    1.230363] PM: Hibernation image not present or could not be loaded.
[    1.230371] registered taskstats version 1
[    1.236280]   Magic number: 11:601:171
[    1.236360] rtc_cmos 00:05: setting system clock to 2019-03-14 09:11:11 UTC (1552554671)
[    1.236375] powernow-k8: Found 1 AMD A4-4000 APU with Radeon(tm) HD Graphics     (2 cpu cores) (version 2.20.00)
[    1.236393] powernow-k8: Core Performance Boosting: on.
[    1.236449] powernow-k8:    0 : pstate 0 (3000 MHz)
[    1.236452] powernow-k8:    1 : pstate 1 (2800 MHz)
[    1.236455] powernow-k8:    2 : pstate 2 (2500 MHz)
[    1.236458] powernow-k8:    3 : pstate 3 (2200 MHz)
[    1.236461] powernow-k8:    4 : pstate 4 (1800 MHz)
[    1.236464] powernow-k8:    5 : pstate 5 (1400 MHz)
[    1.236648] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.236652] EDD information not available.
[    1.332116] ata5: SATA link down (SStatus 0 SControl 300)
[    1.332145] ata4: SATA link down (SStatus 0 SControl 300)
[    1.332169] ata6: SATA link down (SStatus 0 SControl 300)
[    1.332194] ata3: SATA link down (SStatus 0 SControl 300)
[    1.332219] ata2: SATA link down (SStatus 0 SControl 300)
[    1.448098] usb 1-3: new high-speed USB device number 4 using ehci_hcd
[    1.504117] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.504446] ata1.00: ATA-11: KINGSTON SUV400S37120G, 0C3J96R9, max UDMA/133
[    1.504451] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.504899] ata1.00: configured for UDMA/133
[    1.505028] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SUV400S 0C3J PQ: 0 ANSI: 5
[    1.505149] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.505156] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.505191] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.505216] sd 0:0:0:0: [sda] Write Protect is off
[    1.505221] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.505240] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.506011]  sda: sda1 sda2 < sda5 >
[    1.506368] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.506451] Freeing unused kernel memory: 752k freed
[    1.506718] Write protecting the kernel text: 5892k
[    1.506742] Write protecting the kernel read-only data: 2404k
[    1.506746] NX-protecting the kernel data: 4348k
[    1.522513] udevd[98]: starting version 175
[    1.524061] Refined TSC clocksource calibration: 2992.505 MHz.
[    1.524070] Switching to clocksource tsc
[    1.662540] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.662571] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.662607] r8169 0000:03:00.0: (unregistered net_device): unknown MAC, using family default
[    1.662627] r8169 0000:03:00.0: setting latency timer to 64
[    1.662718] r8169 0000:03:00.0: irq 41 for MSI/MSI-X
[    1.664150] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xf841a000, e0:3f:49:6d:06:b4, XID 0c000800 IRQ 41
[    1.664162] r8169 0000:03:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[    1.844099] usb 4-1: new low-speed USB device number 2 using ohci_hcd
[    2.023383] input: Microsoft Wired Keyboard 400 as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input2
[    2.023493] generic-usb 0003:045E:0752.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 400] on usb-0000:00:12.0-1/input0
[    2.023515] usbcore: registered new interface driver usbhid
[    2.023520] usbhid: USB HID core driver
[    2.280089] usb 4-2: new low-speed USB device number 3 using ohci_hcd
[    2.455340] input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input3
[    2.455483] generic-usb 0003:045E:00CB.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:12.0-2/input0
[    2.676092] usb 3-2: new high-speed USB device number 3 using ehci_hcd
[    2.809774] hub 3-2:1.0: USB hub found
[    2.809859] hub 3-2:1.0: 4 ports detected
[    3.072093] usb 6-1: new full-speed USB device number 2 using ohci_hcd
[    3.316094] usb 3-2.1: new high-speed USB device number 4 using ehci_hcd
[    3.504094] usb 3-2.2: new low-speed USB device number 5 using ehci_hcd
[    3.602361] generic-usb 0003:040B:6543.0003: hiddev0,hidraw2: USB HID v1.10 Device [HID 040b:6543] on usb-0000:00:16.2-2.2/input0
[    3.624204] input: HID 040b:6543 as /devices/pci0000:00/0000:00:16.2/usb3/3-2/3-2.2/3-2.2:1.1/input/input4
[    3.624387] generic-usb 0003:040B:6543.0004: input,hidraw3: USB HID v1.10 Keyboard [HID 040b:6543] on usb-0000:00:16.2-2.2/input1
[    6.656117] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.038622] udevd[415]: starting version 175
[    7.061429] lp: driver loaded but no devices found
[    7.104961] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    7.178837] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    7.204061] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.303376] ppdev: user-space parallel port driver
[    7.305810] parport_pc 00:03: reported by Plug and Play ACPI
[    7.305860] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[    7.315482] Bluetooth: Core ver 2.16
[    7.315524] NET: Registered protocol family 31
[    7.315527] Bluetooth: HCI device and connection manager initialized
[    7.315530] Bluetooth: HCI socket layer initialized
[    7.315533] Bluetooth: L2CAP socket layer initialized
[    7.315538] Bluetooth: SCO socket layer initialized
[    7.328216] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.328220] Bluetooth: BNEP filters: protocol multicast
[    7.332069] Bluetooth: RFCOMM TTY layer initialized
[    7.332077] Bluetooth: RFCOMM socket layer initialized
[    7.332079] Bluetooth: RFCOMM ver 1.11
[    7.385948] wmi: Mapper loaded
[    7.400281] lp0: using parport0 (interrupt-driven).
[    7.414765] type=1400 audit(1552554677.673:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=692 comm="apparmor_parser"
[    7.415297] type=1400 audit(1552554677.673:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=692 comm="apparmor_parser"
[    7.423558] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    7.423650] ACPI Error: [AFN7] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    7.423656] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCD_._BCM] (Node f5426de0), AE_NOT_FOUND (20110623/psparse-536)
[    7.423667] ACPI Error: Evaluating _BCM failed (20110623/video-372)
[    7.427547] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5
[    7.428242] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    7.556240] type=1400 audit(1552554677.817:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=768 comm="apparmor_parser"
[    7.556656] type=1400 audit(1552554677.817:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=768 comm="apparmor_parser"
[    7.556900] type=1400 audit(1552554677.817:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=768 comm="apparmor_parser"
[    7.616706] r8169 0000:03:00.0: eth0: link down
[    7.616712] r8169 0000:03:00.0: eth0: link down
[    7.616896] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.881932] Linux video capture interface: v2.00
[    7.890758] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.897412] uvcvideo: Found UVC 1.00 device A4TECH USB2.0 PC Camera (0ac8:3420)
[    7.900612] input: A4TECH USB2.0 PC Camera as /devices/pci0000:00/0000:00:16.2/usb3/3-2/3-2.1/3-2.1:1.0/input/input6
[    7.900737] usbcore: registered new interface driver uvcvideo
[    7.900740] USB Video Class driver (1.1.1)
[    7.949064] hda_codec: ALC887-VD: BIOS auto-probing.
[    7.957365] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[    7.959672] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[    7.959759] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    7.959829] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    7.959897] input: HD-Audio Generic Line-Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[    7.992636] asus_wmi: ASUS WMI generic driver loaded
[    7.994703] asus_wmi: Initialization: 0x0
[    7.994730] asus_wmi: BIOS WMI version: 0.9
[    7.994784] asus_wmi: SFUN value: 0x0
[    7.995187] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input12
[    7.996357] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x0F49 pid 0x0A00
[    7.996405] usbcore: registered new interface driver usblp
[    7.999662] asus_wmi: Backlight controlled by ACPI video driver
[    8.045974] ipheth 1-3:4.2: Apple iPhone USB Ethernet device attached
[    8.046098] usbcore: registered new interface driver ipheth
[   10.148938] r8169 0000:03:00.0: eth0: link up
[   10.149068] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   10.606546] init: failsafe main process (926) killed by TERM signal
[   10.672966] type=1400 audit(1552554680.933:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1161 comm="apparmor_parser"
[   10.673438] type=1400 audit(1552554680.933:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1161 comm="apparmor_parser"
[   10.673722] type=1400 audit(1552554680.933:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1161 comm="apparmor_parser"
[   10.675301] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   10.684084] type=1400 audit(1552554680.945:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1160 comm="apparmor_parser"
[   10.686733] type=1400 audit(1552554680.945:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1162 comm="apparmor_parser"
[   17.910269] usbcore: registered new interface driver snd-usb-audio
[   17.983768] vesafb: mode is 1366x768x32, linelength=5632, pages=0
[   17.983771] vesafb: scrolling: redraw
[   17.983774] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[   17.984411] vesafb: framebuffer at 0xe0000000, mapped to 0xf8a00000, using 4224k, total 4224k
[   17.984793] Console: switching to colour frame buffer device 170x48
[   17.988163] fb0: VESA VGA frame buffer device
[   18.075739] init: gdm main process (1565) killed by TERM signal
[   20.304247] mtrr: no MTRR for e0000000,1000000 found
[   21.096015] eth0: no IPv6 routers present
[   22.694613] init: plymouth-stop pre-start process (1892) terminated with status 1
[ 2391.397540] usb 6-1: USB disconnect, device number 2
[ 2391.397755] usblp0: removed
[ 3823.358189] usb 1-3: USB disconnect, device number 4
[ 3823.376145] ipheth 1-3:4.2: Apple iPhone USB Ethernet now disconnected
[ 3852.408109] usb 1-3: new high-speed USB device number 5 using ehci_hcd
[ 3852.567361] ipheth 1-3:4.2: Apple iPhone USB Ethernet device attached
[ 3852.612559] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 4195.593266] usb 1-3: USB disconnect, device number 5
[ 4195.612129] ipheth 1-3:4.2: Apple iPhone USB Ethernet now disconnected
[ 7685.248108] usb 1-3: new high-speed USB device number 6 using ehci_hcd
[ 7685.408707] ipheth 1-3:4.2: Apple iPhone USB Ethernet device attached
[ 7685.453548] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 8748.424108] usb 6-1: new full-speed USB device number 3 using ohci_hcd
[ 8748.602928] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x0F49 pid 0x0A00
[ 8749.100591] usblp0: removed
[ 8779.671110] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x0F49 pid 0x0A00
[ 8780.781490] usblp0: removed
[11253.187329] usb 6-1: USB disconnect, device number 3
[11253.816102] usb 6-1: new full-speed USB device number 4 using ohci_hcd
[11253.994627] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x0F49 pid 0x0A00
[11254.699988] usb 6-1: USB disconnect, device number 4
[11254.700251] usblp0: removed
[12406.681488] usb 1-3: USB disconnect, device number 6
[12406.700103] ipheth 1-3:4.2: Apple iPhone USB Ethernet now disconnected
[12601.488106] usb 1-3: new high-speed USB device number 7 using ehci_hcd
[12601.832109] usb 4-3: new full-speed USB device number 4 using ohci_hcd
[12601.972105] usb 4-3: device descriptor read/64, error -62
[12602.216108] usb 4-3: device descriptor read/64, error -62
[12602.456132] usb 4-3: new full-speed USB device number 5 using ohci_hcd
[12602.596107] usb 4-3: device descriptor read/64, error -62
[12602.840066] usb 4-3: device descriptor read/64, error -62
[12603.080111] usb 4-3: new full-speed USB device number 6 using ohci_hcd
[12603.488037] usb 4-3: device not accepting address 6, error -62
[12603.544056] hub 4-0:1.0: unable to enumerate USB device on port 3
[12603.912052] usb 1-3: new high-speed USB device number 8 using ehci_hcd
[12604.068760] ipheth 1-3:4.2: Apple iPhone USB Ethernet device attached
[12604.117609] ADDRCONF(NETDEV_UP): eth1: link is not ready
[12604.122614] usb 1-3: USB disconnect, device number 8
[12604.136146] ipheth 1-3:4.2: Apple iPhone USB Ethernet now disconnected
[12656.668036] usb 1-3: new high-speed USB device number 9 using ehci_hcd
[12656.827986] ipheth 1-3:4.2: Apple iPhone USB Ethernet device attached
[12656.873416] ADDRCONF(NETDEV_UP): eth1: link is not ready
[14051.869504] usb 1-3: USB disconnect, device number 9
[14051.888094] ipheth 1-3:4.2: Apple iPhone USB Ethernet now disconnected
[16445.456110] usb 6-1: new full-speed USB device number 5 using ohci_hcd
[16445.635049] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0F49 pid 0x0A00
[16446.000424] usblp0: removed
[16474.683115] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0F49 pid 0x0A00
[16475.812707] usblp0: removed
[16477.717861] parport0: ppdev0 forgot to release port

Kod Seç Genişlet

dmesg | tail
[12656.827986] ipheth 1-3:4.2: Apple iPhone USB Ethernet device attached
[12656.873416] ADDRCONF(NETDEV_UP): eth1: link is not ready
[14051.869504] usb 1-3: USB disconnect, device number 9
[14051.888094] ipheth 1-3:4.2: Apple iPhone USB Ethernet now disconnected
[16445.456110] usb 6-1: new full-speed USB device number 5 using ohci_hcd
[16445.635049] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0F49 pid 0x0A00
[16446.000424] usblp0: removed
[16474.683115] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0F49 pid 0x0A00
[16475.812707] usblp0: removed
[16477.717861] parport0: ppdev0 forgot to release port

Kod Seç Genişlet

sudo nano /etc/network/interfaces
  GNU nano 2.2.6         File: /etc/network/interfaces

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.1.91
netmask 255.255.255.0
gateway 192.168.1.1
dns-search 192.168.1.1
dns-nameservers 192.168.1.1