Kablosuz Ağ Kartı Kayboluyor

[berke4646]

Merhabalar Wifi adaptörümü pcye bağladığımda ağlar gözüküyor ama 2 saniye sonra kayboluyor tekrar geliyor bu döngü hep devam ediyor problem nedir ? Sistemim Kali Linux ve usb boot değil normal olarak kurdum.

Kod Seç Genişlet

cat /etc/lsb-release
DISTRIB_ID=Kali
DISTRIB_RELEASE=kali-rolling
DISTRIB_CODENAME=kali-rolling
DISTRIB_DESCRIPTION="Kali GNU/Linux Rolling"


Kod Seç Genişlet

root@kali:~# cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.19.0-kali1-amd64 root=/dev/sda6 ro quiet

Kod Seç Genişlet

root@kali:~# uname -a
Linux kali 4.19.0-kali1-amd64 #1 SMP Debian 4.19.13-1kali1 (2019-01-03) x86_64 GNU/Linux


Kod Seç Genişlet

root@kali:~# lspci
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
00:1c.4 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 5 (rev e4)
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411B PCI Express Card Reader (rev 01)
01:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 12)
02:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
03:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M] (rev a1)

Kod Seç Genişlet

root@kali:~# lsusb
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 004: ID 1bcf:2c6e Sunplus Innovation Technology Inc.
Bus 002 Device 005: ID 04ca:300b Lite-On Technology Corp. Atheros AR3012 Bluetooth
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


Kod Seç Genişlet

root@kali:~# rfkill list
0: acer-wireless: Wireless LAN
Soft blocked: no
Hard blocked: no
1: acer-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
4: hci0: Bluetooth
Soft blocked: no
Hard blocked: no


Kod Seç Genişlet

root@kali:~# sudo lshw -C network
sudo: lshw: komut bulunamadı


Kod Seç Genişlet

root@kali:~# ifconfig
eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether f8:a9:63:6d:04:56  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 96  bytes 7440 (7.2 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 96  bytes 7440 (7.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.0.100  netmask 255.255.255.0  broadcast 192.168.0.255
        inet6 fe80::baee:65ff:fe65:1c0b  prefixlen 64  scopeid 0x20<link>
        ether b8:ee:65:65:1c:0b  txqueuelen 1000  (Ethernet)
        RX packets 14656  bytes 15719742 (14.9 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 12789  bytes 1896841 (1.8 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 5e:2c:fd:1f:43:95  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


Kod Seç Genişlet

root@kali:~# iwconfig
eth0      no wireless extensions.

wlan1     IEEE 802.11  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm   
          Retry short  long limit:2   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
         
wlan0     IEEE 802.11  ESSID:"VodafoneMobileWiFi-947E58" 
          Mode:Managed  Frequency:2.417 GHz  Access Point: 80:13:82:63:94:7E   
          Bit Rate=72.2 Mb/s   Tx-Power=16 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=53/70  Signal level=-57 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:4  Invalid misc:2027   Missed beacon:0

lo        no wireless extensions.



Kod Seç Genişlet

root@kali:~# iwlist scanning
eth0      Interface doesn't support scanning.

wlan1     Failed to read scan data : No such device

wlan0     Scan completed :
          Cell 01 - Address: 80:13:82:63:94:7E
                    Channel:2
                    Frequency:2.417 GHz (Channel 2)
                    Quality=58/70  Signal level=-52 dBm 
                    Encryption key:on
                    ESSID:"VodafoneMobileWiFi-947E58"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=000000003bde9e14
                    Extra: Last beacon: 140ms ago
                    IE: Unknown: 0019566F6461666F6E654D6F62696C65576946692D393437453538
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 030102
                    IE: Unknown: 200100
                    IE: Unknown: 23021100
                    IE: Unknown: 2A0100
                    IE: Unknown: 2F0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32040C121860
                    IE: Unknown: 2D1ABC011BFFFF000000000000000000000000000000000000000000
                    IE: Unknown: 3D1602080400000000000000000000000000000000000000
                    IE: Unknown: 4A0E14000A002C01C800140005001900
                    IE: Unknown: 7F0101
                    IE: Unknown: DD090010180201000C0000
                    IE: WPA Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD180050F202010187000132000027A4000042435E0062322F00
          Cell 02 - Address: 24:D3:F2:A3:65:7F
                    Channel:4
                    Frequency:2.427 GHz (Channel 4)
                    Quality=35/70  Signal level=-75 dBm 
                    Encryption key:on
                    ESSID:"DE1072"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
                              18 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=000001bb90d18c98
                    Extra: Last beacon: 140ms ago
                    IE: Unknown: 0006444531303732
                    IE: Unknown: 010882848B961224486C
                    IE: Unknown: 030104
                    IE: Unknown: 2A0100
                    IE: Unknown: 32040C183060
                    IE: Unknown: 2D1A2C0017FFFF000000000000000000000000000000000000000000
                    IE: Unknown: 3D1604000400000000000000000000000000000000000000
                    IE: WPA Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 7F080000000000000000
                    IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
                    IE: Unknown: 0706545220010D10
                    IE: Unknown: DD07000C4300000000
          Cell 03 - Address: 24:D3:F2:A3:4F:6D
                    Channel:5
                    Frequency:2.432 GHz (Channel 5)
                    Quality=32/70  Signal level=-78 dBm 
                    Encryption key:on
                    ESSID:"FiberHGW_ZT7N9G_2.4GHz"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
                              18 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=000001bb9115118e
                    Extra: Last beacon: 2120ms ago
                    IE: Unknown: 001646696265724847575F5A54374E39475F322E3447487A
                    IE: Unknown: 010882848B961224486C
                    IE: Unknown: 030105
                    IE: Unknown: 32040C183060
                    IE: Unknown: 0706545220010D14
                    IE: Unknown: 33082001020304050607
                    IE: Unknown: 33082105060708090A0B
                    IE: Unknown: 050400010000
                    IE: WPA Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 2A0100
                    IE: Unknown: 2D1A2C0017FFFF000000000000000000000000000000000000000000
                    IE: Unknown: 3D1605000000000000000000000000000000000000000000
                    IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
                    IE: Unknown: DD07000C4300000000
          Cell 04 - Address: 24:D3:F2:A3:53:69
                    Channel:8
                    Frequency:2.447 GHz (Channel 8)
                    Quality=31/70  Signal level=-79 dBm 
                    Encryption key:on
                    ESSID:"FiberHGW_ZTEN95_2.4GHz"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
                              18 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=000000009126e1bf
                    Extra: Last beacon: 140ms ago
                    IE: Unknown: 001646696265724847575F5A54454E39355F322E3447487A
                    IE: Unknown: 010882848B961224486C
                    IE: Unknown: 030108
                    IE: Unknown: 2A0100
                    IE: Unknown: 32040C183060
                    IE: Unknown: 2D1A2C0017FFFF000000000000000000000000000000000000000000
                    IE: Unknown: 3D1608000700000000000000000000000000000000000000
                    IE: WPA Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 7F080000000000000000
                    IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
                    IE: Unknown: 0706545220010D10
                    IE: Unknown: DD7D0050F204104A0001101044000102103B00010310470010BC329E001DD811B2860124D3F2A35369102100035A54451023000C5A58484E20476174655761791024000456312E301042000831323334353637381054000800060050F2040001101100065A5445204150100800020380103C0001011049000600372A000120
                    IE: Unknown: DD07000C4300000000
          Cell 05 - Address: C4:71:54:66:BA:E2
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=30/70  Signal level=-80 dBm 
                    Encryption key:on
                    ESSID:"FiberHGW_TPBAE4_2.4GHz"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
                              18 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=0000002763563b69
                    Extra: Last beacon: 140ms ago
                    IE: Unknown: 001646696265724847575F5450424145345F322E3447487A
                    IE: Unknown: 010882848B961224486C
                    IE: Unknown: 03010B
                    IE: Unknown: 2A0104
                    IE: Unknown: 32040C183060
                    IE: Unknown: 2D1AEC1117FFFF000001000000000000000000000000000000000000
                    IE: Unknown: 3D160B000700000000000000000000000000000000000000
                    IE: WPA Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 7F080000000100000000
                    IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
                    IE: Unknown: 4A0E14000A002C01C800140005001900
                    IE: Unknown: 7F080000000100000000
                    IE: Unknown: DD980050F204104A00011010440001021057000101103B0001031047001038833092309218839C77C4715466BAE41021000754502D4C494E4B1023000A4172636865722043357610240003312E3010420003312E301054000800060050F20400011011002041433132303020576972656C657373204475616C2042616E6420476967616269100800020000103C0001011049000600372A000120
                    IE: Unknown: DD07000C4303000000

lo        Interface doesn't support scanning.

Kod Seç Genişlet

root@kali:~# lsmod
Module                  Size  Used by
fuse                  122880  5
ctr                    16384  4
ccm                    20480  6
binfmt_misc            20480  1
nls_ascii              16384  1
nls_cp437              20480  1
vfat                   20480  1
fat                    86016  1 vfat
nouveau              2187264  2
snd_hda_codec_realtek   118784  1
snd_hda_codec_generic    86016  1 snd_hda_codec_realtek
snd_hda_codec_hdmi     57344  1
uvcvideo              118784  0
snd_hda_intel          45056  8
snd_hda_codec         151552  4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
mxm_wmi                16384  1 nouveau
ath3k                  20480  0
rt2800usb              32768  0
arc4                   16384  2
btusb                  53248  0
videobuf2_vmalloc      16384  1 uvcvideo
ath9k                 118784  0
btrtl                  16384  1 btusb
btbcm                  16384  1 btusb
videobuf2_memops       16384  1 videobuf2_vmalloc
btintel                24576  1 btusb
ttm                   126976  1 nouveau
rt2x00usb              24576  1 rt2800usb
bluetooth             643072  6 btrtl,btintel,btbcm,ath3k,btusb
videobuf2_v4l2         28672  1 uvcvideo
snd_hda_core           94208  5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
drbg                   28672  1
ansi_cprng             16384  0
ath9k_common           20480  1 ath9k
rt2800lib             118784  1 rt2800usb
ecdh_generic           24576  1 bluetooth
videobuf2_common       53248  2 videobuf2_v4l2,uvcvideo
rt2x00lib              57344  3 rt2800usb,rt2x00usb,rt2800lib
crc_ccitt              16384  1 rt2800lib
videodev              212992  3 videobuf2_v4l2,uvcvideo,videobuf2_common
intel_rapl             24576  0
media                  45056  2 videodev,uvcvideo
snd_hwdep              16384  1 snd_hda_codec
ath9k_hw              487424  2 ath9k_common,ath9k
ath                    36864  3 ath9k_common,ath9k,ath9k_hw
snd_pcm               114688  4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core
mac80211              819200  4 ath9k,rt2x00lib,rt2x00usb,rt2800lib
rtsx_pci_ms            20480  0
x86_pkg_temp_thermal    16384  0
intel_powerclamp       16384  0
cfg80211              765952  5 ath9k_common,ath9k,rt2x00lib,ath,mac80211
coretemp               16384  0
snd_timer              36864  1 snd_pcm
snd                    94208  24 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm
memstick               16384  1 rtsx_pci_ms
soundcore              16384  1 snd
kvm_intel             241664  0
acer_wmi               24576  0
mei_me                 45056  0
sg                     36864  0
kvm                   729088  1 kvm_intel
mei                   118784  1 mei_me
sparse_keymap          16384  1 acer_wmi
i915                 1728512  17
joydev                 24576  0
iTCO_wdt               16384  0
iTCO_vendor_support    16384  1 iTCO_wdt
drm_kms_helper        204800  2 i915,nouveau
drm                   483328  11 drm_kms_helper,i915,ttm,nouveau
i2c_algo_bit           16384  2 i915,nouveau
rfkill                 28672  7 acer_wmi,bluetooth,cfg80211
irqbypass              16384  1 kvm
evdev                  28672  25
serio_raw              16384  0
pcspkr                 16384  0
wmi_bmof               16384  0
ac                     16384  0
efi_pstore             16384  0
intel_cstate           16384  0
intel_uncore          135168  0
pcc_cpufreq            16384  0
intel_rapl_perf        16384  0
efivars                20480  1 efi_pstore
hid_multitouch         28672  0
wmi                    28672  4 acer_wmi,wmi_bmof,mxm_wmi,nouveau
button                 16384  1 nouveau
battery                24576  0
video                  45056  3 acer_wmi,i915,nouveau
efivarfs               16384  1
ip_tables              28672  0
x_tables               45056  1 ip_tables
autofs4                49152  2
ext4                  733184  1
crc16                  16384  2 bluetooth,ext4
mbcache                16384  1 ext4
jbd2                  122880  1 ext4
crc32c_generic         16384  0
fscrypto               32768  1 ext4
ecb                    16384  0
sr_mod                 28672  0
cdrom                  69632  1 sr_mod
sd_mod                 53248  4
crct10dif_pclmul       16384  0
crc32_pclmul           16384  0
crc32c_intel           24576  2
ghash_clmulni_intel    16384  0
pcbc                   16384  0
rtsx_pci_sdmmc         28672  0
hid_generic            16384  0
mmc_core              172032  1 rtsx_pci_sdmmc
aesni_intel           200704  4
ahci                   40960  3
i2c_i801               28672  0
libahci                40960  1 ahci
aes_x86_64             20480  1 aesni_intel
crypto_simd            16384  1 aesni_intel
cryptd                 28672  3 crypto_simd,ghash_clmulni_intel,aesni_intel
glue_helper            16384  1 aesni_intel
xhci_pci               16384  0
ehci_pci               16384  0
libata                278528  2 libahci,ahci
rtsx_pci               73728  2 rtsx_pci_sdmmc,rtsx_pci_ms
xhci_hcd              266240  1 xhci_pci
ehci_hcd               94208  1 ehci_pci
r8169                  90112  0
lpc_ich                28672  0
scsi_mod              249856  4 sd_mod,libata,sg,sr_mod
libphy                 77824  2 r8169
usbcore               290816  9 xhci_hcd,rt2800usb,ehci_pci,uvcvideo,ehci_hcd,ath3k,btusb,xhci_pci,rt2x00usb
usb_common             16384  1 usbcore
i2c_hid                24576  0
hid                   139264  3 i2c_hid,hid_multitouch,hid_generic


Kod Seç Genişlet

root@kali:~# dmesg
[  848.302392] usb 2-1: SerialNumber: 1.0
[  848.431705] usb 2-1: reset high-speed USB device number 52 using xhci_hcd
[  848.591271] ieee80211 phy420: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  848.601743] ieee80211 phy420: rt2x00_set_rf: Info - RF chipset 0005 detected
[  848.602112] ieee80211 phy420: Selected rate control algorithm 'minstrel_ht'
[  848.646331] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  848.646397] ieee80211 phy420: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  848.646428] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  848.646433] ieee80211 phy420: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  848.867854] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  849.145258] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  849.200288] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  849.244011] usb 2-1: USB disconnect, device number 52
[  850.227598] usb 2-1: new high-speed USB device number 53 using xhci_hcd
[  850.396778] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  850.396784] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  850.396788] usb 2-1: Product: 802.11 n WLAN
[  850.396792] usb 2-1: Manufacturer: Ralink
[  850.396794] usb 2-1: SerialNumber: 1.0
[  850.527846] usb 2-1: reset high-speed USB device number 53 using xhci_hcd
[  850.687443] ieee80211 phy421: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  850.697450] ieee80211 phy421: rt2x00_set_rf: Info - RF chipset 0005 detected
[  850.697832] ieee80211 phy421: Selected rate control algorithm 'minstrel_ht'
[  850.732880] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  850.732943] ieee80211 phy421: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  850.732975] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  850.732979] ieee80211 phy421: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  850.952104] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  851.174267] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  851.239147] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  851.284015] usb 2-1: USB disconnect, device number 53
[  852.275749] usb 2-1: new high-speed USB device number 54 using xhci_hcd
[  852.440817] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  852.440822] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  852.440826] usb 2-1: Product: 802.11 n WLAN
[  852.440829] usb 2-1: Manufacturer: Ralink
[  852.440832] usb 2-1: SerialNumber: 1.0
[  852.572220] usb 2-1: reset high-speed USB device number 54 using xhci_hcd
[  852.732493] ieee80211 phy422: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  852.743018] ieee80211 phy422: rt2x00_set_rf: Info - RF chipset 0005 detected
[  852.743492] ieee80211 phy422: Selected rate control algorithm 'minstrel_ht'
[  852.782159] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  852.782227] ieee80211 phy422: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  852.782273] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  852.782277] ieee80211 phy422: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  852.994319] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  853.272055] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  853.325313] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  853.372267] usb 2-1: USB disconnect, device number 54
[  854.351930] usb 2-1: new high-speed USB device number 55 using xhci_hcd
[  854.517052] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  854.517060] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  854.517064] usb 2-1: Product: 802.11 n WLAN
[  854.517068] usb 2-1: Manufacturer: Ralink
[  854.517071] usb 2-1: SerialNumber: 1.0
[  854.652139] usb 2-1: reset high-speed USB device number 55 using xhci_hcd
[  854.815866] ieee80211 phy423: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  854.826372] ieee80211 phy423: rt2x00_set_rf: Info - RF chipset 0005 detected
[  854.827671] ieee80211 phy423: Selected rate control algorithm 'minstrel_ht'
[  854.859861] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  854.859968] ieee80211 phy423: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  854.860021] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  854.860025] ieee80211 phy423: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  855.085197] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  855.304916] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  855.372404] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  855.416599] usb 2-1: USB disconnect, device number 55
[  856.392091] usb 2-1: new high-speed USB device number 56 using xhci_hcd
[  856.557076] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  856.557083] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  856.557087] usb 2-1: Product: 802.11 n WLAN
[  856.557091] usb 2-1: Manufacturer: Ralink
[  856.557094] usb 2-1: SerialNumber: 1.0
[  856.692407] usb 2-1: reset high-speed USB device number 56 using xhci_hcd
[  856.853154] ieee80211 phy424: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  856.863492] ieee80211 phy424: rt2x00_set_rf: Info - RF chipset 0005 detected
[  856.864405] ieee80211 phy424: Selected rate control algorithm 'minstrel_ht'
[  856.904490] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  856.904550] ieee80211 phy424: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  856.904596] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  856.904600] ieee80211 phy424: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  857.114416] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  857.338175] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  857.393888] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  857.440761] usb 2-1: USB disconnect, device number 56
[  858.408249] usb 2-1: new high-speed USB device number 57 using xhci_hcd
[  858.577497] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  858.577504] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  858.577508] usb 2-1: Product: 802.11 n WLAN
[  858.577513] usb 2-1: Manufacturer: Ralink
[  858.577516] usb 2-1: SerialNumber: 1.0
[  858.708511] usb 2-1: reset high-speed USB device number 57 using xhci_hcd
[  858.868150] ieee80211 phy425: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  858.878629] ieee80211 phy425: rt2x00_set_rf: Info - RF chipset 0005 detected
[  858.879121] ieee80211 phy425: Selected rate control algorithm 'minstrel_ht'
[  858.918319] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  858.918389] ieee80211 phy425: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  858.918436] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  858.918441] ieee80211 phy425: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  859.142202] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  859.422642] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  859.473907] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  859.520728] usb 2-1: USB disconnect, device number 57
[  860.492492] usb 2-1: new high-speed USB device number 58 using xhci_hcd
[  860.657660] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  860.657674] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  860.657679] usb 2-1: Product: 802.11 n WLAN
[  860.657685] usb 2-1: Manufacturer: Ralink
[  860.657692] usb 2-1: SerialNumber: 1.0
[  860.788755] usb 2-1: reset high-speed USB device number 58 using xhci_hcd
[  860.948890] ieee80211 phy426: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  860.959342] ieee80211 phy426: rt2x00_set_rf: Info - RF chipset 0005 detected
[  860.959750] ieee80211 phy426: Selected rate control algorithm 'minstrel_ht'
[  860.996129] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  860.996192] ieee80211 phy426: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  860.996223] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  860.996227] ieee80211 phy426: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  861.204193] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  861.423644] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  861.489176] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  861.537018] usb 2-1: USB disconnect, device number 58
[  862.516574] usb 2-1: new high-speed USB device number 59 using xhci_hcd
[  862.681726] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  862.681737] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  862.681743] usb 2-1: Product: 802.11 n WLAN
[  862.681749] usb 2-1: Manufacturer: Ralink
[  862.681757] usb 2-1: SerialNumber: 1.0
[  862.812816] usb 2-1: reset high-speed USB device number 59 using xhci_hcd
[  862.973605] ieee80211 phy427: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  862.983566] ieee80211 phy427: rt2x00_set_rf: Info - RF chipset 0005 detected
[  862.983933] ieee80211 phy427: Selected rate control algorithm 'minstrel_ht'
[  863.025377] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  863.025439] ieee80211 phy427: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  863.025483] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  863.025486] ieee80211 phy427: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  863.237316] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  863.452752] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  863.511331] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  863.559271] usb 2-1: USB disconnect, device number 59
[  863.996696] usb 2-1: new high-speed USB device number 60 using xhci_hcd
[  864.161846] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  864.161852] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  864.161856] usb 2-1: Product: 802.11 n WLAN
[  864.161860] usb 2-1: Manufacturer: Ralink
[  864.161864] usb 2-1: SerialNumber: 1.0
[  864.292881] usb 2-1: reset high-speed USB device number 60 using xhci_hcd
[  864.452814] ieee80211 phy428: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  864.463400] ieee80211 phy428: rt2x00_set_rf: Info - RF chipset 0005 detected
[  864.463698] ieee80211 phy428: Selected rate control algorithm 'minstrel_ht'
[  864.498770] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  864.498836] ieee80211 phy428: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  864.498879] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  864.498882] ieee80211 phy428: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  864.714300] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  864.930659] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  864.977064] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  865.021276] usb 2-1: USB disconnect, device number 60
[  865.980864] usb 2-1: new high-speed USB device number 61 using xhci_hcd
[  866.145908] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  866.145913] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  866.145917] usb 2-1: Product: 802.11 n WLAN
[  866.145919] usb 2-1: Manufacturer: Ralink
[  866.145922] usb 2-1: SerialNumber: 1.0
[  866.277159] usb 2-1: reset high-speed USB device number 61 using xhci_hcd
[  866.440775] ieee80211 phy429: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  866.451043] ieee80211 phy429: rt2x00_set_rf: Info - RF chipset 0005 detected
[  866.451376] ieee80211 phy429: Selected rate control algorithm 'minstrel_ht'
[  866.482351] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  866.482416] ieee80211 phy429: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  866.482460] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  866.482464] ieee80211 phy429: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  866.698693] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  866.915907] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  866.965870] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  867.013559] usb 2-1: USB disconnect, device number 61
[  867.985020] usb 2-1: new high-speed USB device number 62 using xhci_hcd
[  868.154574] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  868.154580] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  868.154583] usb 2-1: Product: 802.11 n WLAN
[  868.154585] usb 2-1: Manufacturer: Ralink
[  868.154588] usb 2-1: SerialNumber: 1.0
[  868.285464] usb 2-1: reset high-speed USB device number 62 using xhci_hcd
[  868.446084] ieee80211 phy430: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  868.456501] ieee80211 phy430: rt2x00_set_rf: Info - RF chipset 0005 detected
[  868.456875] ieee80211 phy430: Selected rate control algorithm 'minstrel_ht'
[  868.498645] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  868.498710] ieee80211 phy430: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  868.498758] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  868.498762] ieee80211 phy430: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  868.723901] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  868.955647] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  869.005930] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  869.049665] usb 2-1: USB disconnect, device number 62
[  870.005183] usb 2-1: new high-speed USB device number 63 using xhci_hcd
[  870.170280] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  870.170283] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  870.170284] usb 2-1: Product: 802.11 n WLAN
[  870.170285] usb 2-1: Manufacturer: Ralink
[  870.170287] usb 2-1: SerialNumber: 1.0
[  870.301454] usb 2-1: reset high-speed USB device number 63 using xhci_hcd
[  870.462311] ieee80211 phy431: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  870.473013] ieee80211 phy431: rt2x00_set_rf: Info - RF chipset 0005 detected
[  870.473481] ieee80211 phy431: Selected rate control algorithm 'minstrel_ht'
[  870.510607] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  870.510674] ieee80211 phy431: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  870.510732] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  870.510737] ieee80211 phy431: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  870.735924] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  871.018848] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  871.070207] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  871.113653] usb 2-1: USB disconnect, device number 63
[  872.101378] usb 2-1: new high-speed USB device number 64 using xhci_hcd
[  872.266389] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  872.266396] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  872.266400] usb 2-1: Product: 802.11 n WLAN
[  872.266403] usb 2-1: Manufacturer: Ralink
[  872.266407] usb 2-1: SerialNumber: 1.0
[  872.397640] usb 2-1: reset high-speed USB device number 64 using xhci_hcd
[  872.561335] ieee80211 phy432: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  872.571837] ieee80211 phy432: rt2x00_set_rf: Info - RF chipset 0005 detected
[  872.572263] ieee80211 phy432: Selected rate control algorithm 'minstrel_ht'
[  872.609846] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  872.609912] ieee80211 phy432: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  872.609938] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  872.609942] ieee80211 phy432: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  872.818489] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  873.102231] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  873.161190] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  873.205779] usb 2-1: USB disconnect, device number 64
[  874.169545] usb 2-1: new high-speed USB device number 65 using xhci_hcd
[  874.334885] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  874.334891] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  874.334895] usb 2-1: Product: 802.11 n WLAN
[  874.334899] usb 2-1: Manufacturer: Ralink
[  874.334902] usb 2-1: SerialNumber: 1.0
[  874.469742] usb 2-1: reset high-speed USB device number 65 using xhci_hcd
[  874.633527] ieee80211 phy433: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  874.645755] ieee80211 phy433: rt2x00_set_rf: Info - RF chipset 0005 detected
[  874.646142] ieee80211 phy433: Selected rate control algorithm 'minstrel_ht'
[  874.689233] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  874.689295] ieee80211 phy433: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  874.689340] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  874.689344] ieee80211 phy433: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  874.903165] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  875.128163] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  875.191391] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  875.234045] usb 2-1: USB disconnect, device number 65
[  876.217805] usb 2-1: new high-speed USB device number 66 using xhci_hcd
[  876.383010] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  876.383023] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  876.383030] usb 2-1: Product: 802.11 n WLAN
[  876.383036] usb 2-1: Manufacturer: Ralink
[  876.383039] usb 2-1: SerialNumber: 1.0
[  876.517997] usb 2-1: reset high-speed USB device number 66 using xhci_hcd
[  876.677928] ieee80211 phy434: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  876.688861] ieee80211 phy434: rt2x00_set_rf: Info - RF chipset 0005 detected
[  876.689263] ieee80211 phy434: Selected rate control algorithm 'minstrel_ht'
[  876.721782] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  876.721848] ieee80211 phy434: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  876.721874] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  876.721878] ieee80211 phy434: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  876.936109] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  877.220285] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  877.270549] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  877.318147] usb 2-1: USB disconnect, device number 66
[  878.277904] usb 2-1: new high-speed USB device number 67 using xhci_hcd
[  878.442968] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  878.442975] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  878.442979] usb 2-1: Product: 802.11 n WLAN
[  878.442983] usb 2-1: Manufacturer: Ralink
[  878.442986] usb 2-1: SerialNumber: 1.0
[  878.574182] usb 2-1: reset high-speed USB device number 67 using xhci_hcd
[  878.734030] ieee80211 phy435: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  878.744460] ieee80211 phy435: rt2x00_set_rf: Info - RF chipset 0005 detected
[  878.744784] ieee80211 phy435: Selected rate control algorithm 'minstrel_ht'
[  878.790697] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  878.790764] ieee80211 phy435: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  878.790807] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  878.790811] ieee80211 phy435: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  879.016472] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  879.300847] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  879.350287] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  879.398404] usb 2-1: USB disconnect, device number 67
[  880.366078] usb 2-1: new high-speed USB device number 68 using xhci_hcd
[  880.531072] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  880.531078] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  880.531082] usb 2-1: Product: 802.11 n WLAN
[  880.531086] usb 2-1: Manufacturer: Ralink
[  880.531090] usb 2-1: SerialNumber: 1.0
[  880.662353] usb 2-1: reset high-speed USB device number 68 using xhci_hcd
[  880.821978] ieee80211 phy436: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  880.832352] ieee80211 phy436: rt2x00_set_rf: Info - RF chipset 0005 detected
[  880.832870] ieee80211 phy436: Selected rate control algorithm 'minstrel_ht'
[  880.866568] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  880.866630] ieee80211 phy436: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  880.866674] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  880.866677] ieee80211 phy436: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  881.082395] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  881.372298] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  881.423976] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  881.470733] usb 2-1: USB disconnect, device number 68
[  882.446336] usb 2-1: new high-speed USB device number 69 using xhci_hcd
[  882.615746] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  882.615753] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  882.615757] usb 2-1: Product: 802.11 n WLAN
[  882.615760] usb 2-1: Manufacturer: Ralink
[  882.615764] usb 2-1: SerialNumber: 1.0
[  882.746533] usb 2-1: reset high-speed USB device number 69 using xhci_hcd
[  882.906307] ieee80211 phy437: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  882.916450] ieee80211 phy437: rt2x00_set_rf: Info - RF chipset 0005 detected
[  882.916823] ieee80211 phy437: Selected rate control algorithm 'minstrel_ht'
[  882.953360] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  882.953426] ieee80211 phy437: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  882.953478] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  882.953481] ieee80211 phy437: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  883.160222] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  883.372396] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  883.437929] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  883.482649] usb 2-1: USB disconnect, device number 69
[  884.474419] usb 2-1: new high-speed USB device number 70 using xhci_hcd
[  884.639457] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  884.639462] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  884.639466] usb 2-1: Product: 802.11 n WLAN
[  884.639469] usb 2-1: Manufacturer: Ralink
[  884.639472] usb 2-1: SerialNumber: 1.0
[  884.774638] usb 2-1: reset high-speed USB device number 70 using xhci_hcd
[  884.934574] ieee80211 phy438: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  884.944846] ieee80211 phy438: rt2x00_set_rf: Info - RF chipset 0005 detected
[  884.945255] ieee80211 phy438: Selected rate control algorithm 'minstrel_ht'
[  884.979055] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  884.979118] ieee80211 phy438: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  884.979164] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  884.979168] ieee80211 phy438: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  885.199839] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  885.479482] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  885.544148] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  885.587030] usb 2-1: USB disconnect, device number 70
[  886.594606] usb 2-1: new high-speed USB device number 71 using xhci_hcd
[  886.767635] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  886.767642] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  886.767646] usb 2-1: Product: 802.11 n WLAN
[  886.767649] usb 2-1: Manufacturer: Ralink
[  886.767653] usb 2-1: SerialNumber: 1.0
[  886.902896] usb 2-1: reset high-speed USB device number 71 using xhci_hcd
[  887.063152] ieee80211 phy439: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  887.073266] ieee80211 phy439: rt2x00_set_rf: Info - RF chipset 0005 detected
[  887.073582] ieee80211 phy439: Selected rate control algorithm 'minstrel_ht'
[  887.108965] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  887.109029] ieee80211 phy439: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  887.109074] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  887.109078] ieee80211 phy439: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  887.331853] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  887.556900] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  887.607977] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  887.651027] usb 2-1: USB disconnect, device number 71
[  888.634790] usb 2-1: new high-speed USB device number 72 using xhci_hcd
[  888.804038] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  888.804046] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  888.804050] usb 2-1: Product: 802.11 n WLAN
[  888.804054] usb 2-1: Manufacturer: Ralink
[  888.804057] usb 2-1: SerialNumber: 1.0
[  888.935077] usb 2-1: reset high-speed USB device number 72 using xhci_hcd
[  889.094601] ieee80211 phy440: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  889.104723] ieee80211 phy440: rt2x00_set_rf: Info - RF chipset 0005 detected
[  889.105092] ieee80211 phy440: Selected rate control algorithm 'minstrel_ht'
[  889.157415] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  889.157478] ieee80211 phy440: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  889.157506] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  889.157510] ieee80211 phy440: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  889.363709] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  889.584346] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  889.635678] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  889.679451] usb 2-1: USB disconnect, device number 72
[  890.631066] usb 2-1: new high-speed USB device number 73 using xhci_hcd
[  890.800629] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  890.800638] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  890.800645] usb 2-1: Product: 802.11 n WLAN
[  890.800650] usb 2-1: Manufacturer: Ralink
[  890.800656] usb 2-1: SerialNumber: 1.0
[  890.931445] usb 2-1: reset high-speed USB device number 73 using xhci_hcd
[  891.094969] ieee80211 phy441: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  891.105880] ieee80211 phy441: rt2x00_set_rf: Info - RF chipset 0005 detected
[  891.106122] ieee80211 phy441: Selected rate control algorithm 'minstrel_ht'
[  891.136442] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  891.136510] ieee80211 phy441: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  891.136549] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  891.136553] ieee80211 phy441: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  891.371410] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  891.597533] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  891.652851] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  891.699455] usb 2-1: USB disconnect, device number 73
[  892.683166] usb 2-1: new high-speed USB device number 74 using xhci_hcd
[  892.848595] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  892.848606] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  892.848614] usb 2-1: Product: 802.11 n WLAN
[  892.848618] usb 2-1: Manufacturer: Ralink
[  892.848621] usb 2-1: SerialNumber: 1.0
[  892.983409] usb 2-1: reset high-speed USB device number 74 using xhci_hcd
[  893.143110] ieee80211 phy442: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  893.157502] ieee80211 phy442: rt2x00_set_rf: Info - RF chipset 0005 detected
[  893.157734] ieee80211 phy442: Selected rate control algorithm 'minstrel_ht'
[  893.184128] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  893.184193] ieee80211 phy442: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  893.184240] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  893.184244] ieee80211 phy442: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  893.395893] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  893.685623] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  893.732261] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  893.775654] usb 2-1: USB disconnect, device number 74
[  894.731347] usb 2-1: new high-speed USB device number 75 using xhci_hcd
[  894.896419] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  894.896426] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  894.896430] usb 2-1: Product: 802.11 n WLAN
[  894.896434] usb 2-1: Manufacturer: Ralink
[  894.896437] usb 2-1: SerialNumber: 1.0
[  895.027717] usb 2-1: reset high-speed USB device number 75 using xhci_hcd
[  895.191248] ieee80211 phy443: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  895.201850] ieee80211 phy443: rt2x00_set_rf: Info - RF chipset 0005 detected
[  895.202203] ieee80211 phy443: Selected rate control algorithm 'minstrel_ht'
[  895.245936] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  895.246513] ieee80211 phy443: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  895.246564] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  895.246569] ieee80211 phy443: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  895.460911] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  895.680367] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  895.732658] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  895.775808] usb 2-1: USB disconnect, device number 75
[  896.771548] usb 2-1: new high-speed USB device number 76 using xhci_hcd
[  896.936597] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  896.936603] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  896.936608] usb 2-1: Product: 802.11 n WLAN
[  896.936611] usb 2-1: Manufacturer: Ralink
[  896.936615] usb 2-1: SerialNumber: 1.0
[  897.067802] usb 2-1: reset high-speed USB device number 76 using xhci_hcd
[  897.227464] ieee80211 phy444: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  897.237691] ieee80211 phy444: rt2x00_set_rf: Info - RF chipset 0005 detected
[  897.238087] ieee80211 phy444: Selected rate control algorithm 'minstrel_ht'
[  897.280661] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  897.280727] ieee80211 phy444: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  897.280774] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  897.280778] ieee80211 phy444: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  897.506200] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  897.782364] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  897.833621] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  897.883918] usb 2-1: USB disconnect, device number 76
[  898.859702] usb 2-1: new high-speed USB device number 77 using xhci_hcd
[  899.024706] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  899.024710] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  899.024713] usb 2-1: Product: 802.11 n WLAN
[  899.024716] usb 2-1: Manufacturer: Ralink
[  899.024718] usb 2-1: SerialNumber: 1.0
[  899.159898] usb 2-1: reset high-speed USB device number 77 using xhci_hcd
[  899.323745] ieee80211 phy445: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  899.333688] ieee80211 phy445: rt2x00_set_rf: Info - RF chipset 0005 detected
[  899.333984] ieee80211 phy445: Selected rate control algorithm 'minstrel_ht'
[  899.397324] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  899.397394] ieee80211 phy445: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  899.397425] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  899.397430] ieee80211 phy445: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  899.623870] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  899.843647] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  899.896610] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  899.940165] usb 2-1: USB disconnect, device number 77
[  900.915916] usb 2-1: new high-speed USB device number 78 using xhci_hcd
[  901.081120] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  901.081126] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  901.081129] usb 2-1: Product: 802.11 n WLAN
[  901.081132] usb 2-1: Manufacturer: Ralink
[  901.081135] usb 2-1: SerialNumber: 1.0
[  901.212319] usb 2-1: reset high-speed USB device number 78 using xhci_hcd
[  901.371817] ieee80211 phy446: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  901.382272] ieee80211 phy446: rt2x00_set_rf: Info - RF chipset 0005 detected
[  901.382674] ieee80211 phy446: Selected rate control algorithm 'minstrel_ht'
[  901.415858] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  901.415937] ieee80211 phy446: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  901.415984] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  901.415989] ieee80211 phy446: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  901.634614] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  901.914277] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  901.975904] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  902.020580] usb 2-1: USB disconnect, device number 78
[  903.008099] usb 2-1: new high-speed USB device number 79 using xhci_hcd
[  903.173919] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  903.173926] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  903.173930] usb 2-1: Product: 802.11 n WLAN
[  903.173933] usb 2-1: Manufacturer: Ralink
[  903.173937] usb 2-1: SerialNumber: 1.0
[  903.304375] usb 2-1: reset high-speed USB device number 79 using xhci_hcd
[  903.467980] ieee80211 phy447: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  903.478419] ieee80211 phy447: rt2x00_set_rf: Info - RF chipset 0005 detected
[  903.479352] ieee80211 phy447: Selected rate control algorithm 'minstrel_ht'
[  903.511836] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  903.511900] ieee80211 phy447: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  903.511946] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  903.511950] ieee80211 phy447: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  903.730723] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  903.958530] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  904.008647] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  904.052539] usb 2-1: USB disconnect, device number 79
[  905.024372] usb 2-1: new high-speed USB device number 80 using xhci_hcd
[  905.189554] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  905.189565] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  905.189570] usb 2-1: Product: 802.11 n WLAN
[  905.189575] usb 2-1: Manufacturer: Ralink
[  905.189580] usb 2-1: SerialNumber: 1.0
[  905.320573] usb 2-1: reset high-speed USB device number 80 using xhci_hcd
[  905.480273] ieee80211 phy448: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  905.490899] ieee80211 phy448: rt2x00_set_rf: Info - RF chipset 0005 detected
[  905.491311] ieee80211 phy448: Selected rate control algorithm 'minstrel_ht'
[  905.531299] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  905.531374] ieee80211 phy448: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  905.531420] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  905.531424] ieee80211 phy448: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  905.742497] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  905.958181] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  906.020588] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  906.064794] usb 2-1: USB disconnect, device number 80
[  907.056489] usb 2-1: new high-speed USB device number 81 using xhci_hcd
[  907.221766] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  907.221773] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  907.221777] usb 2-1: Product: 802.11 n WLAN
[  907.221781] usb 2-1: Manufacturer: Ralink
[  907.221784] usb 2-1: SerialNumber: 1.0
[  907.352839] usb 2-1: reset high-speed USB device number 81 using xhci_hcd
[  907.516357] ieee80211 phy449: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  907.526760] ieee80211 phy449: rt2x00_set_rf: Info - RF chipset 0005 detected
[  907.527084] ieee80211 phy449: Selected rate control algorithm 'minstrel_ht'
[  907.569873] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  907.569937] ieee80211 phy449: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  907.569962] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  907.569966] ieee80211 phy449: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  907.787007] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  908.004418] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  908.053904] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  908.101050] usb 2-1: USB disconnect, device number 81
[  909.052736] usb 2-1: new high-speed USB device number 82 using xhci_hcd
[  909.217844] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  909.217852] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  909.217858] usb 2-1: Product: 802.11 n WLAN
[  909.217864] usb 2-1: Manufacturer: Ralink
[  909.217868] usb 2-1: SerialNumber: 1.0
[  909.348947] usb 2-1: reset high-speed USB device number 82 using xhci_hcd
[  909.509589] ieee80211 phy450: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  909.519940] ieee80211 phy450: rt2x00_set_rf: Info - RF chipset 0005 detected
[  909.520356] ieee80211 phy450: Selected rate control algorithm 'minstrel_ht'
[  909.562000] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  909.562060] ieee80211 phy450: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  909.562097] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  909.562101] ieee80211 phy450: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  909.776864] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  910.053797] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  910.109518] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  910.157054] usb 2-1: USB disconnect, device number 82
[  911.124857] usb 2-1: new high-speed USB device number 83 using xhci_hcd
[  911.290605] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  911.290612] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  911.290616] usb 2-1: Product: 802.11 n WLAN
[  911.290620] usb 2-1: Manufacturer: Ralink
[  911.290624] usb 2-1: SerialNumber: 1.0
[  911.425137] usb 2-1: reset high-speed USB device number 83 using xhci_hcd
[  911.588887] ieee80211 phy451: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  911.600365] ieee80211 phy451: rt2x00_set_rf: Info - RF chipset 0005 detected
[  911.600655] ieee80211 phy451: Selected rate control algorithm 'minstrel_ht'
[  911.638067] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  911.638131] ieee80211 phy451: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  911.638166] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  911.638170] ieee80211 phy451: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  911.850814] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  912.082995] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  912.129274] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  912.177308] usb 2-1: USB disconnect, device number 83
[  913.141065] usb 2-1: new high-speed USB device number 84 using xhci_hcd
[  913.305990] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  913.305995] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  913.305997] usb 2-1: Product: 802.11 n WLAN
[  913.305999] usb 2-1: Manufacturer: Ralink
[  913.306002] usb 2-1: SerialNumber: 1.0
[  913.433247] usb 2-1: reset high-speed USB device number 84 using xhci_hcd
[  913.592910] ieee80211 phy452: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  913.603213] ieee80211 phy452: rt2x00_set_rf: Info - RF chipset 0005 detected
[  913.603585] ieee80211 phy452: Selected rate control algorithm 'minstrel_ht'
[  913.642178] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  913.642243] ieee80211 phy452: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  913.642278] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  913.642282] ieee80211 phy452: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  913.854380] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  914.075214] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  914.138018] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  914.181433] usb 2-1: USB disconnect, device number 84
[  915.157229] usb 2-1: new high-speed USB device number 85 using xhci_hcd
[  915.326310] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  915.326317] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  915.326321] usb 2-1: Product: 802.11 n WLAN
[  915.326325] usb 2-1: Manufacturer: Ralink
[  915.326328] usb 2-1: SerialNumber: 1.0
[  915.457606] usb 2-1: reset high-speed USB device number 85 using xhci_hcd
[  915.622045] ieee80211 phy453: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  915.632335] ieee80211 phy453: rt2x00_set_rf: Info - RF chipset 0005 detected
[  915.632648] ieee80211 phy453: Selected rate control algorithm 'minstrel_ht'
[  915.665523] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  915.665586] ieee80211 phy453: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  915.665631] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  915.665635] ieee80211 phy453: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  915.891206] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  916.109654] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  916.186142] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  916.233886] usb 2-1: USB disconnect, device number 85
[  917.213490] usb 2-1: new high-speed USB device number 86 using xhci_hcd
[  917.391060] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  917.391068] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  917.391073] usb 2-1: Product: 802.11 n WLAN
[  917.391077] usb 2-1: Manufacturer: Ralink
[  917.391082] usb 2-1: SerialNumber: 1.0
[  917.525735] usb 2-1: reset high-speed USB device number 86 using xhci_hcd
[  917.686116] ieee80211 phy454: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  917.696690] ieee80211 phy454: rt2x00_set_rf: Info - RF chipset 0005 detected
[  917.697038] ieee80211 phy454: Selected rate control algorithm 'minstrel_ht'
[  917.734302] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  917.734367] ieee80211 phy454: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  917.734406] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  917.734410] ieee80211 phy454: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  917.943745] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  918.171004] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  918.237747] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  918.281941] usb 2-1: USB disconnect, device number 86
[  919.245621] usb 2-1: new high-speed USB device number 87 using xhci_hcd
[  919.410642] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  919.410647] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  919.410649] usb 2-1: Product: 802.11 n WLAN
[  919.410652] usb 2-1: Manufacturer: Ralink
[  919.410654] usb 2-1: SerialNumber: 1.0
[  919.545922] usb 2-1: reset high-speed USB device number 87 using xhci_hcd
[  919.705497] ieee80211 phy455: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  919.715827] ieee80211 phy455: rt2x00_set_rf: Info - RF chipset 0005 detected
[  919.716218] ieee80211 phy455: Selected rate control algorithm 'minstrel_ht'
[  919.753928] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  919.753992] ieee80211 phy455: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  919.754036] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  919.754040] ieee80211 phy455: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  919.970155] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  920.247285] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  920.307513] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  920.350046] usb 2-1: USB disconnect, device number 87
[  921.333826] usb 2-1: new high-speed USB device number 88 using xhci_hcd
[  921.499048] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  921.499055] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  921.499059] usb 2-1: Product: 802.11 n WLAN
[  921.499062] usb 2-1: Manufacturer: Ralink
[  921.499066] usb 2-1: SerialNumber: 1.0
[  921.630067] usb 2-1: reset high-speed USB device number 88 using xhci_hcd
[  921.790079] ieee80211 phy456: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  921.800446] ieee80211 phy456: rt2x00_set_rf: Info - RF chipset 0005 detected
[  921.800810] ieee80211 phy456: Selected rate control algorithm 'minstrel_ht'
[  921.839441] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  921.839513] ieee80211 phy456: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  921.839565] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  921.839570] ieee80211 phy456: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  922.045811] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  922.329689] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  922.374972] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  922.418296] usb 2-1: USB disconnect, device number 88
[  923.394093] usb 2-1: new high-speed USB device number 89 using xhci_hcd
[  923.559468] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  923.559477] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  923.559484] usb 2-1: Product: 802.11 n WLAN
[  923.559488] usb 2-1: Manufacturer: Ralink
[  923.559491] usb 2-1: SerialNumber: 1.0
[  923.690336] usb 2-1: reset high-speed USB device number 89 using xhci_hcd
[  923.854570] ieee80211 phy457: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  923.864348] ieee80211 phy457: rt2x00_set_rf: Info - RF chipset 0005 detected
[  923.864601] ieee80211 phy457: Selected rate control algorithm 'minstrel_ht'
[  923.894898] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  923.894958] ieee80211 phy457: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  923.894996] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  923.895000] ieee80211 phy457: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  924.108595] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  924.328692] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  924.382718] usb 2-1: USB disconnect, device number 89
[  924.395436] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  925.350209] usb 2-1: new high-speed USB device number 90 using xhci_hcd
[  925.516072] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  925.516078] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  925.516082] usb 2-1: Product: 802.11 n WLAN
[  925.516085] usb 2-1: Manufacturer: Ralink
[  925.516088] usb 2-1: SerialNumber: 1.0
[  925.650418] usb 2-1: reset high-speed USB device number 90 using xhci_hcd
[  925.814086] ieee80211 phy458: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  925.824448] ieee80211 phy458: rt2x00_set_rf: Info - RF chipset 0005 detected
[  925.824798] ieee80211 phy458: Selected rate control algorithm 'minstrel_ht'
[  925.861417] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  925.861485] ieee80211 phy458: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  925.861532] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  925.861537] ieee80211 phy458: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  926.072735] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  926.292672] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  926.359952] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  926.406816] usb 2-1: USB disconnect, device number 90
[  927.398409] usb 2-1: new high-speed USB device number 91 using xhci_hcd
[  927.563422] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  927.563426] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  927.563429] usb 2-1: Product: 802.11 n WLAN
[  927.563430] usb 2-1: Manufacturer: Ralink
[  927.563432] usb 2-1: SerialNumber: 1.0
[  927.694660] usb 2-1: reset high-speed USB device number 91 using xhci_hcd
[  927.854315] ieee80211 phy459: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  927.864721] ieee80211 phy459: rt2x00_set_rf: Info - RF chipset 0005 detected
[  927.865786] ieee80211 phy459: Selected rate control algorithm 'minstrel_ht'
[  927.904986] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  927.905055] ieee80211 phy459: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  927.905085] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  927.905089] ieee80211 phy459: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  928.111584] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  928.328295] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  928.391363] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  928.434926] usb 2-1: USB disconnect, device number 91
[  929.402681] usb 2-1: new high-speed USB device number 92 using xhci_hcd
[  929.571594] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  929.571600] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  929.571604] usb 2-1: Product: 802.11 n WLAN
[  929.571607] usb 2-1: Manufacturer: Ralink
[  929.571610] usb 2-1: SerialNumber: 1.0
[  929.703043] usb 2-1: reset high-speed USB device number 92 using xhci_hcd
[  929.862560] ieee80211 phy460: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  929.873078] ieee80211 phy460: rt2x00_set_rf: Info - RF chipset 0005 detected
[  929.873545] ieee80211 phy460: Selected rate control algorithm 'minstrel_ht'
[  929.919425] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  929.919489] ieee80211 phy460: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  929.919514] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  929.919518] ieee80211 phy460: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  930.135675] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  930.416372] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  930.467054] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  930.512427] usb 2-1: USB disconnect, device number 92
[  931.470808] usb 2-1: new high-speed USB device number 93 using xhci_hcd
[  931.635810] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  931.635817] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  931.635822] usb 2-1: Product: 802.11 n WLAN
[  931.635826] usb 2-1: Manufacturer: Ralink
[  931.635829] usb 2-1: SerialNumber: 1.0
[  931.767069] usb 2-1: reset high-speed USB device number 93 using xhci_hcd
[  931.926953] ieee80211 phy461: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  931.937291] ieee80211 phy461: rt2x00_set_rf: Info - RF chipset 0005 detected
[  931.937598] ieee80211 phy461: Selected rate control algorithm 'minstrel_ht'
[  931.971752] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  931.971817] ieee80211 phy461: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  931.971852] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  931.971856] ieee80211 phy461: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  932.184561] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  932.400992] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  932.471799] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  932.520301] usb 2-1: USB disconnect, device number 93
[  933.495000] usb 2-1: new high-speed USB device number 94 using xhci_hcd
[  933.660124] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  933.660131] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  933.660135] usb 2-1: Product: 802.11 n WLAN
[  933.660139] usb 2-1: Manufacturer: Ralink
[  933.660142] usb 2-1: SerialNumber: 1.0
[  933.791293] usb 2-1: reset high-speed USB device number 94 using xhci_hcd
[  933.950879] ieee80211 phy462: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  933.961097] ieee80211 phy462: rt2x00_set_rf: Info - RF chipset 0005 detected
[  933.961437] ieee80211 phy462: Selected rate control algorithm 'minstrel_ht'
[  933.996494] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  933.996560] ieee80211 phy462: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  933.996605] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  933.996610] ieee80211 phy462: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  934.213418] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  934.428926] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  934.476513] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  934.522053] usb 2-1: USB disconnect, device number 94
[  934.943150] usb 2-1: new high-speed USB device number 95 using xhci_hcd
[  935.108323] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  935.108330] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  935.108334] usb 2-1: Product: 802.11 n WLAN
[  935.108338] usb 2-1: Manufacturer: Ralink
[  935.108341] usb 2-1: SerialNumber: 1.0
[  935.243352] usb 2-1: reset high-speed USB device number 95 using xhci_hcd
[  935.403035] ieee80211 phy463: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  935.413391] ieee80211 phy463: rt2x00_set_rf: Info - RF chipset 0005 detected
[  935.413804] ieee80211 phy463: Selected rate control algorithm 'minstrel_ht'
[  935.457841] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  935.457908] ieee80211 phy463: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  935.457964] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  935.457968] ieee80211 phy463: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  935.686907] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  935.909201] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  935.974171] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  936.019772] usb 2-1: USB disconnect, device number 95
[  937.007341] usb 2-1: new high-speed USB device number 96 using xhci_hcd
[  937.172461] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  937.172471] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  937.172477] usb 2-1: Product: 802.11 n WLAN
[  937.172482] usb 2-1: Manufacturer: Ralink
[  937.172487] usb 2-1: SerialNumber: 1.0
[  937.303611] usb 2-1: reset high-speed USB device number 96 using xhci_hcd
[  937.463211] ieee80211 phy464: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  937.473204] ieee80211 phy464: rt2x00_set_rf: Info - RF chipset 0005 detected
[  937.473570] ieee80211 phy464: Selected rate control algorithm 'minstrel_ht'
[  937.512265] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  937.512324] ieee80211 phy464: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  937.512351] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  937.512355] ieee80211 phy464: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  937.725031] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  938.001931] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  938.065288] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  938.111927] usb 2-1: USB disconnect, device number 96
[  939.083538] usb 2-1: new high-speed USB device number 97 using xhci_hcd
[  939.252557] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  939.252564] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  939.252568] usb 2-1: Product: 802.11 n WLAN
[  939.252571] usb 2-1: Manufacturer: Ralink
[  939.252575] usb 2-1: SerialNumber: 1.0
[  939.383829] usb 2-1: reset high-speed USB device number 97 using xhci_hcd
[  939.543495] ieee80211 phy465: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  939.553691] ieee80211 phy465: rt2x00_set_rf: Info - RF chipset 0005 detected
[  939.554096] ieee80211 phy465: Selected rate control algorithm 'minstrel_ht'
[  939.600428] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  939.600488] ieee80211 phy465: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  939.600513] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  939.600517] ieee80211 phy465: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  939.808830] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  940.029064] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  940.101196] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  940.147929] usb 2-1: USB disconnect, device number 97
[  941.111744] usb 2-1: new high-speed USB device number 98 using xhci_hcd
[  941.280781] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  941.280787] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  941.280791] usb 2-1: Product: 802.11 n WLAN
[  941.280795] usb 2-1: Manufacturer: Ralink
[  941.280798] usb 2-1: SerialNumber: 1.0
[  941.412209] usb 2-1: reset high-speed USB device number 98 using xhci_hcd
[  941.572793] ieee80211 phy466: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  941.582952] ieee80211 phy466: rt2x00_set_rf: Info - RF chipset 0005 detected
[  941.584035] ieee80211 phy466: Selected rate control algorithm 'minstrel_ht'
[  941.616569] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  941.616634] ieee80211 phy466: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  941.616680] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  941.616684] ieee80211 phy466: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  941.838354] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  942.058383] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  942.111929] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  942.156306] usb 2-1: USB disconnect, device number 98
[  943.123945] usb 2-1: new high-speed USB device number 99 using xhci_hcd
[  943.293059] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  943.293065] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  943.293069] usb 2-1: Product: 802.11 n WLAN
[  943.293073] usb 2-1: Manufacturer: Ralink
[  943.293077] usb 2-1: SerialNumber: 1.0
[  943.424233] usb 2-1: reset high-speed USB device number 99 using xhci_hcd
[  943.583945] ieee80211 phy467: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  943.594252] ieee80211 phy467: rt2x00_set_rf: Info - RF chipset 0005 detected
[  943.594577] ieee80211 phy467: Selected rate control algorithm 'minstrel_ht'
[  943.628290] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  943.628353] ieee80211 phy467: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  943.628384] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  943.628387] ieee80211 phy467: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  943.834747] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  944.106428] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  944.170307] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  944.216436] usb 2-1: USB disconnect, device number 99
[  945.184139] usb 2-1: new high-speed USB device number 100 using xhci_hcd
[  945.353302] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  945.353308] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  945.353311] usb 2-1: Product: 802.11 n WLAN
[  945.353314] usb 2-1: Manufacturer: Ralink
[  945.353317] usb 2-1: SerialNumber: 1.0
[  945.484372] usb 2-1: reset high-speed USB device number 100 using xhci_hcd
[  945.644615] ieee80211 phy468: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  945.654972] ieee80211 phy468: rt2x00_set_rf: Info - RF chipset 0005 detected
[  945.655401] ieee80211 phy468: Selected rate control algorithm 'minstrel_ht'
[  945.686112] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  945.686177] ieee80211 phy468: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  945.686229] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  945.686233] ieee80211 phy468: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  945.909691] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  946.145847] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  946.226101] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  946.268955] usb 2-1: USB disconnect, device number 100
[  947.244354] usb 2-1: new high-speed USB device number 101 using xhci_hcd
[  947.409446] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  947.409451] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  947.409454] usb 2-1: Product: 802.11 n WLAN
[  947.409457] usb 2-1: Manufacturer: Ralink
[  947.409459] usb 2-1: SerialNumber: 1.0
[  947.544574] usb 2-1: reset high-speed USB device number 101 using xhci_hcd
[  947.704169] ieee80211 phy469: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  947.714146] ieee80211 phy469: rt2x00_set_rf: Info - RF chipset 0005 detected
[  947.714529] ieee80211 phy469: Selected rate control algorithm 'minstrel_ht'
[  947.748899] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  947.748961] ieee80211 phy469: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  947.748985] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  947.748989] ieee80211 phy469: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  947.977936] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  948.193346] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  948.257671] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  948.300935] usb 2-1: USB disconnect, device number 101
[  949.272569] usb 2-1: new high-speed USB device number 102 using xhci_hcd
[  949.438422] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  949.438430] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  949.438434] usb 2-1: Product: 802.11 n WLAN
[  949.438438] usb 2-1: Manufacturer: Ralink
[  949.438441] usb 2-1: SerialNumber: 1.0
[  949.572854] usb 2-1: reset high-speed USB device number 102 using xhci_hcd
[  949.736601] ieee80211 phy470: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  949.746950] ieee80211 phy470: rt2x00_set_rf: Info - RF chipset 0005 detected
[  949.747227] ieee80211 phy470: Selected rate control algorithm 'minstrel_ht'
[  949.792725] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  949.792787] ieee80211 phy470: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  949.792833] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  949.792837] ieee80211 phy470: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  950.001856] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  950.226292] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  950.281494] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  950.327561] usb 2-1: USB disconnect, device number 102
[  950.744724] usb 2-1: new high-speed USB device number 103 using xhci_hcd
[  950.910502] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  950.910509] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  950.910513] usb 2-1: Product: 802.11 n WLAN
[  950.910517] usb 2-1: Manufacturer: Ralink
[  950.910521] usb 2-1: SerialNumber: 1.0
[  951.041113] usb 2-1: reset high-speed USB device number 103 using xhci_hcd
[  951.205640] ieee80211 phy471: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  951.215837] ieee80211 phy471: rt2x00_set_rf: Info - RF chipset 0005 detected
[  951.216268] ieee80211 phy471: Selected rate control algorithm 'minstrel_ht'
[  951.251341] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  951.251408] ieee80211 phy471: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  951.251446] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  951.251451] ieee80211 phy471: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  951.468779] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  951.752722] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  951.810541] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  951.853317] usb 2-1: USB disconnect, device number 103
[  952.804925] usb 2-1: new high-speed USB device number 104 using xhci_hcd
[  952.974151] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  952.974156] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  952.974158] usb 2-1: Product: 802.11 n WLAN
[  952.974161] usb 2-1: Manufacturer: Ralink
[  952.974163] usb 2-1: SerialNumber: 1.0
[  953.109200] usb 2-1: reset high-speed USB device number 104 using xhci_hcd
[  953.269142] ieee80211 phy472: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  953.279318] ieee80211 phy472: rt2x00_set_rf: Info - RF chipset 0005 detected
[  953.279673] ieee80211 phy472: Selected rate control algorithm 'minstrel_ht'
[  953.317404] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  953.317470] ieee80211 phy472: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  953.317518] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  953.317522] ieee80211 phy472: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  953.531006] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  953.743033] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  953.797979] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  953.841441] usb 2-1: USB disconnect, device number 104
[  954.801128] usb 2-1: new high-speed USB device number 105 using xhci_hcd
[  954.970231] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  954.970237] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  954.970240] usb 2-1: Product: 802.11 n WLAN
[  954.970243] usb 2-1: Manufacturer: Ralink
[  954.970246] usb 2-1: SerialNumber: 1.0
[  955.105342] usb 2-1: reset high-speed USB device number 105 using xhci_hcd
[  955.265135] ieee80211 phy473: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  955.275690] ieee80211 phy473: rt2x00_set_rf: Info - RF chipset 0005 detected
[  955.275972] ieee80211 phy473: Selected rate control algorithm 'minstrel_ht'
[  955.311477] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  955.311542] ieee80211 phy473: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  955.311590] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  955.311595] ieee80211 phy473: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  955.531239] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  955.814272] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  955.881165] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  955.933572] usb 2-1: USB disconnect, device number 105
[  956.897332] usb 2-1: new high-speed USB device number 106 using xhci_hcd
[  957.062406] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  957.062413] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  957.062417] usb 2-1: Product: 802.11 n WLAN
[  957.062420] usb 2-1: Manufacturer: Ralink
[  957.062424] usb 2-1: SerialNumber: 1.0
[  957.193664] usb 2-1: reset high-speed USB device number 106 using xhci_hcd
[  957.357555] ieee80211 phy474: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  957.367923] ieee80211 phy474: rt2x00_set_rf: Info - RF chipset 0005 detected
[  957.368282] ieee80211 phy474: Selected rate control algorithm 'minstrel_ht'
[  957.398320] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  957.398383] ieee80211 phy474: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  957.398431] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  957.398434] ieee80211 phy474: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  957.610988] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  957.827929] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  957.886385] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  957.929945] usb 2-1: USB disconnect, device number 106
[  958.913539] usb 2-1: new high-speed USB device number 107 using xhci_hcd
[  959.078612] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  959.078619] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  959.078623] usb 2-1: Product: 802.11 n WLAN
[  959.078627] usb 2-1: Manufacturer: Ralink
[  959.078631] usb 2-1: SerialNumber: 1.0
[  959.209818] usb 2-1: reset high-speed USB device number 107 using xhci_hcd
[  959.373454] ieee80211 phy475: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  959.383867] ieee80211 phy475: rt2x00_set_rf: Info - RF chipset 0005 detected
[  959.384266] ieee80211 phy475: Selected rate control algorithm 'minstrel_ht'
[  959.427819] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  959.427886] ieee80211 phy475: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  959.427912] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  959.427916] ieee80211 phy475: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  959.643857] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  959.927928] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  959.987695] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  960.030104] usb 2-1: USB disconnect, device number 107
[  961.009837] usb 2-1: new high-speed USB device number 108 using xhci_hcd
[  961.175596] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  961.175603] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  961.175607] usb 2-1: Product: 802.11 n WLAN
[  961.175611] usb 2-1: Manufacturer: Ralink
[  961.175614] usb 2-1: SerialNumber: 1.0
[  961.306027] usb 2-1: reset high-speed USB device number 108 using xhci_hcd
[  961.465683] ieee80211 phy476: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  961.476132] ieee80211 phy476: rt2x00_set_rf: Info - RF chipset 0005 detected
[  961.476494] ieee80211 phy476: Selected rate control algorithm 'minstrel_ht'
[  961.509325] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  961.509387] ieee80211 phy476: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  961.509432] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  961.509436] ieee80211 phy476: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  961.722230] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  961.944177] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  962.014492] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  962.058439] usb 2-1: USB disconnect, device number 108
[  963.033987] usb 2-1: new high-speed USB device number 109 using xhci_hcd
[  963.198983] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  963.198990] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  963.198994] usb 2-1: Product: 802.11 n WLAN
[  963.198998] usb 2-1: Manufacturer: Ralink
[  963.199001] usb 2-1: SerialNumber: 1.0
[  963.330296] usb 2-1: reset high-speed USB device number 109 using xhci_hcd
[  963.494247] ieee80211 phy477: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  963.504696] ieee80211 phy477: rt2x00_set_rf: Info - RF chipset 0005 detected
[  963.505028] ieee80211 phy477: Selected rate control algorithm 'minstrel_ht'
[  963.538052] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  963.544271] ieee80211 phy477: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  963.544314] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  963.544319] ieee80211 phy477: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  963.756327] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  964.034379] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  964.093290] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  964.142578] usb 2-1: USB disconnect, device number 109
[  965.142173] usb 2-1: new high-speed USB device number 110 using xhci_hcd
[  965.307227] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  965.307233] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  965.307238] usb 2-1: Product: 802.11 n WLAN
[  965.307241] usb 2-1: Manufacturer: Ralink
[  965.307245] usb 2-1: SerialNumber: 1.0
[  965.438392] usb 2-1: reset high-speed USB device number 110 using xhci_hcd
[  965.602613] ieee80211 phy478: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  965.613031] ieee80211 phy478: rt2x00_set_rf: Info - RF chipset 0005 detected
[  965.613406] ieee80211 phy478: Selected rate control algorithm 'minstrel_ht'
[  965.653281] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  965.653350] ieee80211 phy478: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  965.653396] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  965.653400] ieee80211 phy478: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  965.864793] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  966.091827] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  966.150880] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  966.194703] usb 2-1: USB disconnect, device number 110
[  967.154392] usb 2-1: new high-speed USB device number 111 using xhci_hcd
[  967.319399] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  967.319406] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  967.319410] usb 2-1: Product: 802.11 n WLAN
[  967.319413] usb 2-1: Manufacturer: Ralink
[  967.319417] usb 2-1: SerialNumber: 1.0
[  967.450832] usb 2-1: reset high-speed USB device number 111 using xhci_hcd
[  967.610515] ieee80211 phy479: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  967.620741] ieee80211 phy479: rt2x00_set_rf: Info - RF chipset 0005 detected
[  967.621092] ieee80211 phy479: Selected rate control algorithm 'minstrel_ht'
[  967.654003] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  967.654067] ieee80211 phy479: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  967.654092] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  967.654095] ieee80211 phy479: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  967.876430] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  968.104976] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  968.163397] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  968.211331] usb 2-1: USB disconnect, device number 111
[  969.190595] usb 2-1: new high-speed USB device number 112 using xhci_hcd
[  969.355617] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  969.355623] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  969.355626] usb 2-1: Product: 802.11 n WLAN
[  969.355629] usb 2-1: Manufacturer: Ralink
[  969.355632] usb 2-1: SerialNumber: 1.0
[  969.487046] usb 2-1: reset high-speed USB device number 112 using xhci_hcd
[  969.646543] ieee80211 phy480: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  969.656790] ieee80211 phy480: rt2x00_set_rf: Info - RF chipset 0005 detected
[  969.657158] ieee80211 phy480: Selected rate control algorithm 'minstrel_ht'
[  969.698530] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  969.698590] ieee80211 phy480: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  969.698658] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  969.698663] ieee80211 phy480: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  969.920872] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  970.135762] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  970.191517] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  970.234946] usb 2-1: USB disconnect, device number 112
[  971.230819] usb 2-1: new high-speed USB device number 113 using xhci_hcd
[  971.395918] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  971.395924] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  971.395928] usb 2-1: Product: 802.11 n WLAN
[  971.395932] usb 2-1: Manufacturer: Ralink
[  971.395935] usb 2-1: SerialNumber: 1.0
[  971.527139] usb 2-1: reset high-speed USB device number 113 using xhci_hcd
[  971.690836] ieee80211 phy481: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  971.700739] ieee80211 phy481: rt2x00_set_rf: Info - RF chipset 0005 detected
[  971.701006] ieee80211 phy481: Selected rate control algorithm 'minstrel_ht'
[  971.727582] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  971.727645] ieee80211 phy481: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  971.727677] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  971.727680] ieee80211 phy481: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  971.941252] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  972.221192] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  972.286823] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  972.331324] usb 2-1: USB disconnect, device number 113
[  973.311133] usb 2-1: new high-speed USB device number 114 using xhci_hcd
[  973.476518] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  973.476525] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  973.476529] usb 2-1: Product: 802.11 n WLAN
[  973.476532] usb 2-1: Manufacturer: Ralink
[  973.476536] usb 2-1: SerialNumber: 1.0
[  973.611278] usb 2-1: reset high-speed USB device number 114 using xhci_hcd
[  973.770999] ieee80211 phy482: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  973.781098] ieee80211 phy482: rt2x00_set_rf: Info - RF chipset 0005 detected
[  973.781446] ieee80211 phy482: Selected rate control algorithm 'minstrel_ht'
[  973.822880] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  973.823363] ieee80211 phy482: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  973.823403] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  973.823407] ieee80211 phy482: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  974.047485] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  974.267113] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  974.329050] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  974.375577] usb 2-1: USB disconnect, device number 114
[  975.323244] usb 2-1: new high-speed USB device number 115 using xhci_hcd
[  975.488406] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  975.488415] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  975.488421] usb 2-1: Product: 802.11 n WLAN
[  975.488426] usb 2-1: Manufacturer: Ralink
[  975.488430] usb 2-1: SerialNumber: 1.0
[  975.623442] usb 2-1: reset high-speed USB device number 115 using xhci_hcd
[  975.791124] ieee80211 phy483: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  975.801412] ieee80211 phy483: rt2x00_set_rf: Info - RF chipset 0005 detected
[  975.801813] ieee80211 phy483: Selected rate control algorithm 'minstrel_ht'
[  975.838113] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  975.838178] ieee80211 phy483: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  975.838204] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  975.838208] ieee80211 phy483: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  976.053654] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  976.267207] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  976.333405] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  976.375708] usb 2-1: USB disconnect, device number 115
[  977.343458] usb 2-1: new high-speed USB device number 116 using xhci_hcd
[  977.516531] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  977.516536] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  977.516540] usb 2-1: Product: 802.11 n WLAN
[  977.516543] usb 2-1: Manufacturer: Ralink
[  977.516546] usb 2-1: SerialNumber: 1.0
[  977.647719] usb 2-1: reset high-speed USB device number 116 using xhci_hcd
[  977.808655] ieee80211 phy484: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  977.819137] ieee80211 phy484: rt2x00_set_rf: Info - RF chipset 0005 detected
[  977.819516] ieee80211 phy484: Selected rate control algorithm 'minstrel_ht'
[  977.852377] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  977.852440] ieee80211 phy484: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  977.852484] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  977.852488] ieee80211 phy484: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  978.078143] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  978.310123] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  978.368461] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  978.412012] usb 2-1: USB disconnect, device number 116
[  979.371649] usb 2-1: new high-speed USB device number 117 using xhci_hcd
[  979.543090] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  979.543095] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  979.543097] usb 2-1: Product: 802.11 n WLAN
[  979.543099] usb 2-1: Manufacturer: Ralink
[  979.543102] usb 2-1: SerialNumber: 1.0
[  979.676078] usb 2-1: reset high-speed USB device number 117 using xhci_hcd
[  979.839666] ieee80211 phy485: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  979.851919] ieee80211 phy485: rt2x00_set_rf: Info - RF chipset 0005 detected
[  979.852219] ieee80211 phy485: Selected rate control algorithm 'minstrel_ht'
[  979.892508] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  979.892573] ieee80211 phy485: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  979.892626] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  979.892631] ieee80211 phy485: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  980.101898] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  980.333404] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  980.388463] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  980.433098] usb 2-1: USB disconnect, device number 117
[  981.391857] usb 2-1: new high-speed USB device number 118 using xhci_hcd
[  981.560839] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  981.560841] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  981.560843] usb 2-1: Product: 802.11 n WLAN
[  981.560844] usb 2-1: Manufacturer: Ralink
[  981.560845] usb 2-1: SerialNumber: 1.0
[  981.692075] usb 2-1: reset high-speed USB device number 118 using xhci_hcd
[  981.851527] ieee80211 phy486: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  981.861203] ieee80211 phy486: rt2x00_set_rf: Info - RF chipset 0005 detected
[  981.861460] ieee80211 phy486: Selected rate control algorithm 'minstrel_ht'
[  981.903213] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  981.903276] ieee80211 phy486: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  981.903302] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  981.903305] ieee80211 phy486: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  982.120222] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  982.399802] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  982.454412] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  982.500345] usb 2-1: USB disconnect, device number 118
[  983.480066] usb 2-1: new high-speed USB device number 119 using xhci_hcd
[  983.645169] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  983.645179] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  983.645185] usb 2-1: Product: 802.11 n WLAN
[  983.645190] usb 2-1: Manufacturer: Ralink
[  983.645195] usb 2-1: SerialNumber: 1.0
[  983.780360] usb 2-1: reset high-speed USB device number 119 using xhci_hcd
[  983.944027] ieee80211 phy487: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  983.954927] ieee80211 phy487: rt2x00_set_rf: Info - RF chipset 0005 detected
[  983.955307] ieee80211 phy487: Selected rate control algorithm 'minstrel_ht'
[  983.988756] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  983.995180] ieee80211 phy487: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  983.995222] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  983.995226] ieee80211 phy487: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  984.216600] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  984.500674] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  984.568831] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  984.612709] usb 2-1: USB disconnect, device number 119
[  985.576392] usb 2-1: new high-speed USB device number 120 using xhci_hcd
[  985.742151] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  985.742159] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  985.742164] usb 2-1: Product: 802.11 n WLAN
[  985.742168] usb 2-1: Manufacturer: Ralink
[  985.742171] usb 2-1: SerialNumber: 1.0
[  985.872694] usb 2-1: reset high-speed USB device number 120 using xhci_hcd
[  986.033619] ieee80211 phy488: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  986.044034] ieee80211 phy488: rt2x00_set_rf: Info - RF chipset 0005 detected
[  986.044416] ieee80211 phy488: Selected rate control algorithm 'minstrel_ht'
[  986.079452] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  986.079519] ieee80211 phy488: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  986.079566] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  986.079571] ieee80211 phy488: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  986.288854] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  986.514325] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  986.564969] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  986.608708] usb 2-1: USB disconnect, device number 120
[  987.576512] usb 2-1: new high-speed USB device number 121 using xhci_hcd
[  987.745639] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  987.745646] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  987.745650] usb 2-1: Product: 802.11 n WLAN
[  987.745653] usb 2-1: Manufacturer: Ralink
[  987.745657] usb 2-1: SerialNumber: 1.0
[  987.880749] usb 2-1: reset high-speed USB device number 121 using xhci_hcd
[  988.041502] ieee80211 phy489: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  988.051859] ieee80211 phy489: rt2x00_set_rf: Info - RF chipset 0005 detected
[  988.052185] ieee80211 phy489: Selected rate control algorithm 'minstrel_ht'
[  988.088419] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  988.088477] ieee80211 phy489: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  988.088520] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  988.088524] ieee80211 phy489: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  988.299400] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  988.518824] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  988.573683] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  988.620833] usb 2-1: USB disconnect, device number 121
[  989.600732] usb 2-1: new high-speed USB device number 122 using xhci_hcd
[  989.765773] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  989.765780] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  989.765785] usb 2-1: Product: 802.11 n WLAN
[  989.765788] usb 2-1: Manufacturer: Ralink
[  989.765792] usb 2-1: SerialNumber: 1.0
[  989.896986] usb 2-1: reset high-speed USB device number 122 using xhci_hcd
[  990.056724] ieee80211 phy490: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  990.066924] ieee80211 phy490: rt2x00_set_rf: Info - RF chipset 0005 detected
[  990.067781] ieee80211 phy490: Selected rate control algorithm 'minstrel_ht'
[  990.101079] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  990.101136] ieee80211 phy490: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  990.101182] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  990.101186] ieee80211 phy490: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  990.307271] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  990.583208] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  990.638222] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  990.685082] usb 2-1: USB disconnect, device number 122
[  991.648962] usb 2-1: new high-speed USB device number 123 using xhci_hcd
[  991.818653] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  991.818660] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  991.818665] usb 2-1: Product: 802.11 n WLAN
[  991.818668] usb 2-1: Manufacturer: Ralink
[  991.818672] usb 2-1: SerialNumber: 1.0
[  991.953235] usb 2-1: reset high-speed USB device number 123 using xhci_hcd
[  992.120857] ieee80211 phy491: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  992.131693] ieee80211 phy491: rt2x00_set_rf: Info - RF chipset 0005 detected
[  992.132042] ieee80211 phy491: Selected rate control algorithm 'minstrel_ht'
[  992.163251] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  992.163324] ieee80211 phy491: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  992.163373] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  992.163378] ieee80211 phy491: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  992.381594] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  992.618834] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  992.678190] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  992.721349] usb 2-1: USB disconnect, device number 123


Kod Seç Genişlet

root@kali:~# dmesg | tail
[ 1076.555797] usb 2-1: Manufacturer: Ralink
[ 1076.555799] usb 2-1: SerialNumber: 1.0
[ 1076.686691] usb 2-1: reset high-speed USB device number 42 using xhci_hcd
[ 1076.847072] ieee80211 phy534: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 1076.857236] ieee80211 phy534: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 1076.857570] ieee80211 phy534: Selected rate control algorithm 'minstrel_ht'
[ 1076.898098] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1076.898163] ieee80211 phy534: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 1076.898212] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[ 1076.898217] ieee80211 phy534: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36


Eğer konuda hata varsa üzgünüm henüz yeniyim sitede ve Linuxu yeni yeni öğreniyorum,forumda "Konu Açarken Aktarılması Gerekenler" adlı konu gördüm oradaki tüm kodları paylaştım.

[unixmania]

sonucta esas noktayi dememissin. baglanabiliyonmu?, hemen kopuyomu?

aglari_goster.sh

Kod Seç Genişlet


#!/usr/bin/sh

wpa_supplicant -C/run/wpa_supplicant -iwlan0 -B;
wpa_cli scan;
sleep 3;
wpa_cli scan_results;


baglan.sh

Kod Seç Genişlet


#!/usr/bin/sh

wpa_supplicant -cwpa.conf -iwlan0 -B;
sleep 2;
ip link set wlan0 up;
ip addr add 192.168.1.79/24 dev wlan0
ip route add default via 192.168.1.1



wpa.conf

Kod Seç Genişlet


ctrl_interface=DIR=/run/wpa_supplicant GROUP=wheel
eapol_version=1
ap_scan=1
fast_reauth=1


network={
ssid="agin_adi"
scan_ssid=1
proto=WPA RSN
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP WEP104 WEP40
psk="gizlisifre"
}


Yukarda sadece sifre ve agin adini degistirsen yeter. Bide daha yukardaki komutlarda wlan0 yazan yerleri, statik ip adreslerini ve modemin ipsini  (192.168.1.1) kendi sistemine gore degistirmen gerekebilir.

[berke4646]

Cevabın için teşekkürler bilgisayarın kendi WiFi aygıtında problem yok USB girişinden taktığım cihazda sıkıntı var bağlanmayı geçin ağları bile göremiyorum.

Atheros bilgisayarın kendi WiFi aygıtı o problemsiz.

[unixmania]

aglari_goster diye komut vermisim; deneyip denemedigini soylemedin. Biri forumda sana cevap verirken komutta ilistirmisse onu deneyip sonucunu(varsa komutun ciktisini) soylemen icindir. Dahili-harici farketmez. harici olan wlan1 se oralari wlan1 yapcan o kadar.  /sys/class/net/wlan1  sabit duruyo dimi? o da bi kaybolup bi geliyomu?

Kod Seç Genişlet


IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready


deyip duruyor.

Kod Seç Genişlet


ip link set wlan1 up;
  yapip sonra aglari tarat bakam.

NOT: komutlarimin duzgun yurumesi icin senden ROOT hakki ister/isteyebilir.

[berke4646]

Geç cevap verdim kusura bakmayın böyle bir hata alıyorum.

Kod Seç Genişlet

root@kali:~# ip link set wlan1 up;
Cannot find device "wlan1"


Kod Seç Genişlet

root@kali:~# airmon-ng

PHY Interface Driver Chipset

phy0 wlan0 ath9k Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
phy5 wlan1 ?????? non-mac80211 device? (report this!)