TBS 6903 TV CART İÇİN IRQ hatasını düzeltebilirim

Başlatan ptergrand, 20 Aralık 2018 - 18:29:24

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

Yazdır
Aşağı git Sayfa1
Kullanıcı Eylemleri

ptergrand

20 Aralık 2018 - 18:29:24 Son düzenlenme: 20 Aralık 2018 - 18:38:33 ptergrand
burda açıklaması var yaba bilmem için yardımcı olurmusunuz



Problemin çevrenizle ilgili olduğundan emin olabiliriz, yani anakartınız olabilir veya 6280 kartınızın IRQ'ları paylaştığını vb., çünkü biz IPTV sağlayıcıları olan müşterilerimiz var ve bu yüzden 7 gün 24 saat TBS kartları kullanıyoruz. Linux'taki temel ve böyle bir sorun yoktur. Yani, bu genel bir sorun değildir ve IRQ ile ilgili olduğundan, IRQ kullanımda olduğu sürece sürücülerde yapabileceğimiz bir şey olma ihtimalinin daha düşük olması (bu e-postanın daha sonra ne demek istediğimi daha net hale getirecektir).

anakartınızın doğru bir şekilde işleyememesi kadar basit olabilir (IRS kesintileri Linux ile uğraşır), fakat MSI kesintileri ile işe yarıyor. PCI-Express). Böylece, modern Linux sürücüsü ile modern bir donanım olan 6280, hem eski IRQ kesintilerini hem de Message Signal Interrupts'u (MSI) destekliyor ve böylece IRQ yerine MSI ile çalışmayı deneyebilir ve problemi ortadan kaldıracak iyi bir şans vardır. Yani , MSI

, sürücüde IRQ yerine şu şekilde etkinleştirilebilir :

- "/etc/modprobe.d" içindeki "tbs.conf" adlı dosyayı aşağıdaki gibi bir içerikle oluşturabilirsiniz:


# cat /etc/modprobe.d/ tbs.conf
burda açıklaması var yaba bilmem için yardımcı olurmusunuz



Problemin çevrenizle ilgili olduğundan emin olabiliriz, yani anakartınız olabilir veya 6280 kartınızın IRQ'ları paylaştığını vb., çünkü biz IPTV sağlayıcıları olan müşterilerimiz var ve bu yüzden 7 gün 24 saat TBS kartları kullanıyoruz. Linux'taki temel ve böyle bir sorun yoktur. Yani, bu genel bir sorun değildir ve IRQ ile ilgili olduğundan, IRQ kullanımda olduğu sürece sürücülerde yapabileceğimiz bir şey olma ihtimalinin daha düşük olması (bu e-postanın daha sonra ne demek istediğimi daha net hale getirecektir).

anakartınızın doğru bir şekilde işleyememesi kadar basit olabilir (IRS kesintileri Linux ile uğraşır), fakat MSI kesintileri ile işe yarıyor. PCI-Express). Böylece, modern Linux sürücüsü ile modern bir donanım olan 6280, hem eski IRQ kesintilerini hem de Message Signal Interrupts'u (MSI) destekliyor ve böylece IRQ yerine MSI ile çalışmayı deneyebilir ve problemi ortadan kaldıracak iyi bir şans vardır. Yani , MSI

, sürücüde IRQ yerine şu şekilde etkinleştirilebilir :

- "/etc/modprobe.d" içindeki "tbs.conf" adlı dosyayı aşağıdaki gibi bir içerikle oluşturabilirsiniz:


# cat /etc/modprobe.d/ tbs.conf

seçenekleri saa716x_tbs-dvb int_type = 1

ve daha sonra MSI kesme desteğiyle sürücüyü yüklemek için yeniden

başlat , bu seçenekle ilgili daha fazla bilgiyi şu adreste bulabilirsiniz: linux-tbs-drivers / linux / drivers / media / common / saa716x / saa716x_tbs.c:

seçenekleri saa716x_tbs-dvb int_type = 1

ve daha sonra MSI kesme desteğiyle sürücüyü yüklemek için yeniden

başlat , bu seçenekle ilgili daha fazla bilgiyi şu adreste bulabilirsiniz: linux-tbs-drivers / linux / drivers / media / common / saa716x / saa716x_tbs.c:



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 20 Aralık 2018 - 18:36:37

[https://i.hizliresim.com/zjYAYg.png][/img]
[https://i.hizliresim.com/al050d.png][/img]


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 20 Aralık 2018 - 18:37:45

https://i.hizliresim.com/al050d.png


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 20 Aralık 2018 - 18:38:33

https://i.hizliresim.com/9aE4EO.png

if

#1
21 Aralık 2018 - 08:46:39
Kod Seç

modinfo saa716x_tbs-dvb


çıktısına bakayım.

ptergrand

#2
24 Aralık 2018 - 20:12:10 Son düzenlenme: 24 Aralık 2018 - 22:05:06 ptergrand
Alıntı yapılan: if - 21 Aralık 2018 - 08:46:39
Kod Seç

modinfo saa716x_tbs-dvb


çıktısına bakayım.

merhaba kernel güncellemesinden sonra tekrar yüklesim son hali

r
Kod Seç
oot@star:/home/star# dmesg
[    0.000000] Linux version 4.20.0-sparky-686-pae (pavroo@debian32) (gcc version 8.2.0 (Debian 8.2.0-12)) #1 SMP Mon Dec 24 11:39:28 CET 2018
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdd2ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bdd30000-0x00000000bdd3dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bdd3e000-0x00000000bdd87fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bdd88000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Dell Inc. Vostro 230                   /07N90W, BIOS 1.4.0 12/09/2010
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2792.860 MHz processor
[    0.002946] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002948] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002953] last_pfn = 0x1c0000 max_arch_pfn = 0x1000000
[    0.002959] MTRR default type: uncachable
[    0.002960] MTRR fixed ranges enabled:
[    0.002961]   00000-9FFFF write-back
[    0.002962]   A0000-BFFFF uncachable
[    0.002963]   C0000-CFFFF write-protect
[    0.002964]   D0000-DFFFF uncachable
[    0.002965]   E0000-EFFFF write-through
[    0.002966]   F0000-FFFFF write-protect
[    0.002967] MTRR variable ranges enabled:
[    0.002968]   0 base 1C0000000 mask FC0000000 uncachable
[    0.002969]   1 base 000000000 mask E00000000 write-back
[    0.002970]   2 base 0C0000000 mask FC0000000 uncachable
[    0.002971]   3 base 0BDE00000 mask FFFE00000 uncachable
[    0.002972]   4 base 0BE000000 mask FFE000000 uncachable
[    0.002973]   5 disabled
[    0.002974]   6 disabled
[    0.002974]   7 disabled
[    0.003665] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.003799] e820: update [mem 0xbde00000-0xffffffff] usable ==> reserved
[    0.011748] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [(ptrval)]
[    0.017796] initial memory mapped: [mem 0x00000000-0x10ffffff]
[    0.017799] Base memory trampoline at [(ptrval)] 9b000 size 16384
[    0.017853] BRK [0x10b0a000, 0x10b0afff] PGTABLE
[    0.017868] BRK [0x10b0b000, 0x10b0cfff] PGTABLE
[    0.017870] BRK [0x10b0d000, 0x10b0dfff] PGTABLE
[    0.017871] BRK [0x10b0e000, 0x10b0efff] PGTABLE
[    0.017879] RAMDISK: [mem 0x33197000-0x358c2fff]
[    0.017887] ACPI: Early table checksum verification disabled
[    0.017975] ACPI: RSDP 0x00000000000F96F0 000024 (v02 ACPIAM)
[    0.017978] ACPI: XSDT 0x00000000BDD30100 00005C (v01 DELL   WN09     20101209 MSFT 00000097)
[    0.017985] ACPI: FACP 0x00000000BDD30290 0000F4 (v04 DELL   FACP2154 20101209 MSFT 00000097)
[    0.017991] ACPI: DSDT 0x00000000BDD305C0 0058F2 (v02 1AAAA  1AAAA000 00000000 INTL 20051117)
[    0.017995] ACPI: FACS 0x00000000BDD3E000 000040
[    0.017997] ACPI: FACS 0x00000000BDD3E000 000040
[    0.018000] ACPI: APIC 0x00000000BDD30390 00006C (v02 DELL   APIC2154 20101209 MSFT 00000097)
[    0.018003] ACPI: MCFG 0x00000000BDD30400 00003C (v01 DELL   OEMMCFG  20101209 MSFT 00000097)
[    0.018007] ACPI: X**X 0x00000000BDD30440 000176 (v01 DELL   WN09     20101209 MSFT 00000097)
[    0.018010] ACPI: OEMB 0x00000000BDD3E040 000072 (v01 DELL   OEMB2154 20101209 MSFT 00000097)
[    0.018014] ACPI: HPET 0x00000000BDD3A5C0 000038 (v01 DELL   OEMHPET  20101209 MSFT 00000097)
[    0.018017] ACPI: GSCI 0x00000000BDD3E0C0 002024 (v01 DELL   GMCHSCI  20101209 MSFT 00000097)
[    0.018036] ACPI: Local APIC address 0xfee00000
[    0.018040] 6288MB HIGHMEM available.
[    0.018041] 879MB LOWMEM available.
[    0.018042]   mapped low ram: 0 - 36ffe000
[    0.018042]   low ram: 0 - 36ffe000
[    0.018049] BRK [0x10b0f000, 0x10b0ffff] PGTABLE
[    0.018052] Zone ranges:
[    0.018052]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.018054]   Normal   [mem 0x0000000001000000-0x0000000036ffdfff]
[    0.018055]   HighMem  [mem 0x0000000036ffe000-0x00000001bfffffff]
[    0.018056] Movable zone start for each node
[    0.018057] Early memory node ranges
[    0.018058]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.018059]   node   0: [mem 0x0000000000100000-0x00000000bdd2ffff]
[    0.018060]   node   0: [mem 0x0000000100000000-0x00000001bfffffff]
[    0.018061] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bfffffff]
[    0.018063] On node 0 totalpages: 1563854
[    0.042568]   DMA zone: 36 pages used for memmap
[    0.042569]   DMA zone: 0 pages reserved
[    0.042570]   DMA zone: 3998 pages, LIFO batch:0
[    0.042656]   Normal zone: 1944 pages used for memmap
[    0.042657]   Normal zone: 221182 pages, LIFO batch:63
[    0.047044]   HighMem zone: 1338674 pages, LIFO batch:63
[    0.078859] Using APIC driver default
[    0.078870] Reserving Intel graphics memory at [mem 0xbe000000-0xbfffffff]
[    0.079032] ACPI: PM-Timer IO Port: 0x808
[    0.079035] ACPI: Local APIC address 0xfee00000
[    0.079052] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.079054] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.079056] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.079058] ACPI: IRQ0 used by override.
[    0.079059] ACPI: IRQ9 used by override.
[    0.079061] Using ACPI (MADT) for SMP configuration information
[    0.079063] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.079072] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.079089] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.079091] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.079092] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.079092] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.079094] PM: Registered nosave memory: [mem 0xbdd30000-0xbdd3dfff]
[    0.079095] PM: Registered nosave memory: [mem 0xbdd3e000-0xbdd87fff]
[    0.079095] PM: Registered nosave memory: [mem 0xbdd88000-0xbfffffff]
[    0.079096] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[    0.079097] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.079098] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[    0.079098] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.079101] [mem 0xc0000000-0xfedfffff] available for PCI devices
[    0.079103] Booting paravirtualized kernel on bare hardware
[    0.079108] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.079121] random: get_random_bytes called from start_kernel+0x79/0x410 with crng_init=0
[    0.079128] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[    0.079401] percpu: Embedded 29 pages/cpu @(ptrval) s89356 r0 d29428 u118784
[    0.079407] pcpu-alloc: s89356 r0 d29428 u118784 alloc=29*4096
[    0.079408] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.079428] Built 1 zonelists, mobility grouping on.  Total pages: 1561874
[    0.079431] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.20.0-sparky-686-pae root=UUID=afa0e19a-aea4-46d9-8683-3d6c9e613f79 ro quiet
[    0.079712] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.079813] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.079848] Initializing CPU#0
[    0.105371] Initializing HighMem for node 0 (00036ffe:001c0000)
[    0.360269] Initializing Movable for node 0 (00000000:00000000)
[    0.365923] Memory: 6072220K/6255416K available (6628K kernel code, 623K rwdata, 2064K rodata, 872K init, 452K bss, 183196K reserved, 0K cma-reserved, 5354696K highmem)
[    0.365928] virtual kernel memory layout:
                   fixmap  : 0xffd35000 - 0xfffff000   (2856 kB)
                 cpu_entry : 0xff400000 - 0xff8c1000   (4868 kB)
                   pkmap   : 0xff000000 - 0xff200000   (2048 kB)
                   vmalloc : 0xf77fe000 - 0xfeffe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf6ffe000   ( 879 MB)
                     .init : 0xd092f000 - 0xd0a09000   ( 872 kB)
                     .data : 0xd0679230 - 0xd091fc40   (2714 kB)
                     .text : 0xd0000000 - 0xd0679230   (6628 kB)
[    0.365929] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.366062] Kernel/User page tables isolation: enabled
[    0.366077] ftrace: allocating 29173 entries in 57 pages
[    0.381158] rcu: Hierarchical RCU implementation.
[    0.381160] rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[    0.381161] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.381162] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.383993] NR_IRQS: 2304, nr_irqs: 456, preallocated irqs: 16
[    0.384161] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.386424] Console: colour VGA+ 80x25
[    0.386429] printk: console [tty0] enabled
[    0.386437] ACPI: Core revision 20181003
[    0.386598] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.386606] hpet clockevent registered
[    0.386612] APIC: Switch to symmetric I/O mode setup
[    0.386614] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.386981] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.406611] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2841e81ddc5, max_idle_ns: 440795337310 ns
[    0.406624] Calibrating delay loop (skipped), value calculated using timer frequency.. 5585.72 BogoMIPS (lpj=11171440)
[    0.406626] pid_max: default: 32768 minimum: 301
[    0.406675] LSM: Security Framework initializing
[    0.406677] Yama: becoming mindful.
[    0.406683] AppArmor: AppArmor disabled by boot time parameter
[    0.406703] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.406707] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.406946] mce: CPU supports 6 MCE banks
[    0.406952] CPU0: Thermal monitoring enabled (TM2)
[    0.406956] process: using mwait in idle threads
[    0.406961] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.406962] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.406964] Spectre V2 : Mitigation: Full generic retpoline
[    0.406964] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.406965] Speculative Store Bypass: Vulnerable
[    0.407098] Freeing SMP alternatives memory: 28K
[    0.414613] smpboot: CPU0: Intel Pentium(R) Dual-Core  CPU      E5500  @ 2.80GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.414613] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.414613] ... version:                2
[    0.414613] ... bit width:              40
[    0.414613] ... generic registers:      2
[    0.414613] ... value mask:             000000ffffffffff
[    0.414613] ... max period:             000000007fffffff
[    0.414613] ... fixed-purpose events:   3
[    0.414613] ... event mask:             0000000700000003
[    0.414613] rcu: Hierarchical SRCU implementation.
[    0.414613] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.414613] smp: Bringing up secondary CPUs ...
[    0.414613] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.414613] x86: Booting SMP configuration:
[    0.414613] .... node  #0, CPUs:      #1
[    0.006432] Initializing CPU#1
[    0.414613] smp: Brought up 1 node, 2 CPUs
[    0.414613] smpboot: Max logical packages: 2
[    0.414613] smpboot: Total of 2 processors activated (11171.44 BogoMIPS)
[    0.414919] devtmpfs: initialized
[    0.414919] PM: Registering ACPI NVS region [mem 0xbdd3e000-0xbdd87fff] (303104 bytes)
[    0.414919] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.414919] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.414919] pinctrl core: initialized pinctrl subsystem
[    0.414925] NET: Registered protocol family 16
[    0.415047] audit: initializing netlink subsys (disabled)
[    0.415056] audit: type=2000 audit(1545670917.028:1): state=initialized audit_enabled=0 res=1
[    0.415056] cpuidle: using governor ladder
[    0.415056] cpuidle: using governor menu
[    0.415056] ACPI: bus type PCI registered
[    0.415056] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.415056] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.415056] PCI: not using MMCONFIG
[    0.415770] PCI: Using configuration type 1 for base access
[    0.418930] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.418930] ACPI: Added _OSI(Module Device)
[    0.418930] ACPI: Added _OSI(Processor Device)
[    0.418930] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.418930] ACPI: Added _OSI(Processor Aggregator Device)
[    0.418930] ACPI: Added _OSI(Linux-Dell-Video)
[    0.418930] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.423485] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.424684] ACPI: Interpreter enabled
[    0.424706] ACPI: (supports S0 S3 S4 S5)
[    0.424707] ACPI: Using IOAPIC for interrupt routing
[    0.424741] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.425841] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.425842] PCI: Using MMCONFIG for extended config space
[    0.425848] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.426048] ACPI: Enabled 12 GPEs in block 00 to 1F
[    0.433093] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.433098] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.433275] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.433442] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.433708] PCI host bridge to bus 0000:00
[    0.433710] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.433712] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.433714] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.433715] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.433717] pci_bus 0000:00: root bus resource [mem 0xbde00000-0xdfffffff window]
[    0.433718] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff window]
[    0.433720] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.433729] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
[    0.433841] pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000
[    0.433853] pci 0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit]
[    0.433859] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.433864] pci 0000:00:02.0: reg 0x20: [io  0xec00-0xec07]
[    0.433991] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.434011] pci 0000:00:1b.0: reg 0x10: [mem 0xfe9f8000-0xfe9fbfff 64bit]
[    0.434079] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.434175] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.434277] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.434379] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.434485] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.434586] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.434695] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.434797] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.434837] pci 0000:00:1d.0: reg 0x20: [io  0xe880-0xe89f]
[    0.434941] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.434981] pci 0000:00:1d.1: reg 0x20: [io  0xe800-0xe81f]
[    0.435083] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.435122] pci 0000:00:1d.2: reg 0x20: [io  0xe480-0xe49f]
[    0.435224] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.435263] pci 0000:00:1d.3: reg 0x20: [io  0xe400-0xe41f]
[    0.435371] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.435390] pci 0000:00:1d.7: reg 0x10: [mem 0xfe9f7c00-0xfe9f7fff]
[    0.435463] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.435553] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.435681] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.435759] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[    0.435763] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.435766] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[    0.435875] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[    0.435890] pci 0000:00:1f.2: reg 0x10: [io  0xe080-0xe087]
[    0.435897] pci 0000:00:1f.2: reg 0x14: [io  0xe000-0xe003]
[    0.435903] pci 0000:00:1f.2: reg 0x18: [io  0xdc00-0xdc07]
[    0.435910] pci 0000:00:1f.2: reg 0x1c: [io  0xd880-0xd883]
[    0.435917] pci 0000:00:1f.2: reg 0x20: [io  0xd800-0xd80f]
[    0.435950] pci 0000:00:1f.2: PME# supported from D3hot
[    0.436036] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.436088] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.436223] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.436287] pci 0000:02:00.0: [544d:6178] type 00 class 0x048000
[    0.436317] pci 0000:02:00.0: reg 0x10: [mem 0xfeac0000-0xfeafffff]
[    0.436543] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.436548] pci 0000:00:1c.1:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.436609] pci 0000:03:00.0: [14e4:1691] type 00 class 0x020000
[    0.436644] pci 0000:03:00.0: reg 0x10: [mem 0xfebf0000-0xfebfffff 64bit]
[    0.436704] pci 0000:03:00.0: enabling Extended Tags
[    0.436783] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.436911] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.436916] pci 0000:00:1c.2:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.436935] pci_bus 0000:04: extended config space not accessible
[    0.436990] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.436998] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.437000] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.437001] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.437003] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.437004] pci 0000:00:1e.0:   bridge window [mem 0xbde00000-0xdfffffff window] (subtractive decode)
[    0.437006] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xffffffff window] (subtractive decode)
[    0.437024] pci_bus 0000:00: on NUMA node 0
[    0.437709] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.437769] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.437828] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.437887] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.437945] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.438004] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.438062] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.438123] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.438263] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.438263] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.438263] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.438263] vgaarb: loaded
[    0.438263] EDAC MC: Ver: 3.0.0
[    0.438263] PCI: Using ACPI for IRQ routing
[    0.444034] PCI: pci_cache_line_size set to 64 bytes
[    0.444073] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.444074] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.444076] e820: reserve RAM buffer [mem 0xbdd30000-0xbfffffff]
[    0.444199] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.444199] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.444199] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.446640] clocksource: Switched to clocksource tsc-early
[    0.460409] VFS: Disk quotas dquot_6.6.0
[    0.460434] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.460508] pnp: PnP ACPI init
[    0.460621] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.460623] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.460630] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.460708] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.461203] pnp 00:02: [dma 0 disabled]
[    0.461262] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.461452] system 00:03: [io  0x0a00-0x0a0f] has been reserved
[    0.461454] system 00:03: [io  0x0a10-0x0a1f] has been reserved
[    0.461455] system 00:03: [io  0x0a20-0x0a2f] has been reserved
[    0.461460] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.461581] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.461583] system 00:04: [io  0x0800-0x087f] has been reserved
[    0.461585] system 00:04: [io  0x0480-0x04bf] has been reserved
[    0.461587] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.461589] system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.461594] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.461701] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved
[    0.461706] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.461825] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.461828] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.461832] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.461911] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.461915] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.462124] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.462126] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.462128] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.462130] system 00:08: [mem 0x00100000-0xbddfffff] could not be reserved
[    0.462134] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.462278] pnp: PnP ACPI: found 9 devices
[    0.462281] PnPBIOS: Disabled by ACPI PNP
[    0.498533] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.498549] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.498553] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.498555] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.498562] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.498564] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.498571] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.498573] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.498589] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[    0.498595] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.498600] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.498605] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.498608] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.498610] pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
[    0.498613] pci 0000:00:1c.2: BAR 13: assigned [io  0x3000-0x3fff]
[    0.498616] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.498618] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.498622] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.498625] pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.498630] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.498632] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.498636] pci 0000:00:1c.1:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.498639] pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.498644] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.498646] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.498650] pci 0000:00:1c.2:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.498653] pci 0000:00:1c.2:   bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.498658] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.498668] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.498669] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.498671] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.498672] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.498674] pci_bus 0000:00: resource 8 [mem 0xbde00000-0xdfffffff window]
[    0.498675] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff window]
[    0.498677] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.498679] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.498680] pci_bus 0000:01: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.498682] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.498683] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.498685] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.498686] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.498688] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.498689] pci_bus 0000:03: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.498691] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.498692] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.498694] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.498695] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.498697] pci_bus 0000:04: resource 8 [mem 0xbde00000-0xdfffffff window]
[    0.498698] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xffffffff window]
[    0.498791] NET: Registered protocol family 2
[    0.498977] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    0.498982] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.498998] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.499025] TCP: Hash tables configured (established 8192 bind 8192)
[    0.499059] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.499067] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.499121] NET: Registered protocol family 1
[    0.499135] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.499849] PCI: CLS 32 bytes, default 64
[    0.499892] Unpacking initramfs...
[    1.162478] Freeing initrd memory: 40112K
[    1.162514] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.162517] software IO TLB: mapped [mem 0x2b297000-0x2f297000] (64MB)
[    1.163302] Initialise system trusted keyrings
[    1.163368] workingset: timestamp_bits=14 max_order=21 bucket_order=7
[    1.163392] zbud: loaded
[    2.178785] tsc: Refined TSC clocksource calibration: 2792.999 MHz
[    2.178791] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28426b16f90, max_idle_ns: 440795205097 ns
[    2.178801] clocksource: Switched to clocksource tsc
[    2.527545] Key type asymmetric registered
[    2.527548] Asymmetric key parser 'x509' registered
[    2.527562] bounce: pool size: 64 pages
[    2.527585] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.527621] io scheduler noop registered
[    2.527622] io scheduler deadline registered
[    2.527647] io scheduler cfq registered (default)
[    2.527648] io scheduler mq-deadline registered
[    2.527649] io scheduler kyber registered
[    2.527757] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[    2.527950] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[    2.527983] pciehp 0000:00:1c.0:pcie004: Slot #32 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
[    2.528089] pcieport 0000:00:1c.1: enabling device (0106 -> 0107)
[    2.528212] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[    2.528252] pciehp 0000:00:1c.1:pcie004: Slot #33 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
[    2.528332] pcieport 0000:00:1c.2: enabling device (0106 -> 0107)
[    2.528454] pcieport 0000:00:1c.2: Signaling PME with IRQ 26
[    2.528482] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
[    2.528584] intel_idle: does not run on family 6 model 23
[    2.529172] isapnp: Scanning for PnP cards...
[    2.882091] isapnp: No Plug & Play device found
[    2.882170] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.902578] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.902998] Linux agpgart interface v0.103
[    2.903356] i8042: PNP: No PS/2 controller found.
[    2.903357] i8042: Probing ports directly.
[    2.903744] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.903754] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.904023] mousedev: PS/2 mouse device common for all mice
[    2.904079] rtc_cmos 00:01: RTC can wake from S4
[    2.904206] rtc_cmos 00:01: registered as rtc0
[    2.904225] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.904248] ledtrig-cpu: registered to indicate activity on CPUs
[    2.904582] NET: Registered protocol family 10
[    2.904824] Segment Routing with IPv6
[    2.904843] mip6: Mobile IPv6
[    2.904845] NET: Registered protocol family 17
[    2.904848] mpls_gso: MPLS GSO support
[    2.904993] microcode: sig=0x1067a, pf=0x1, revision=0xa0b
[    2.905025] microcode: Microcode Update Driver: v2.2.
[    2.905028] Using IPI No-Shortcut mode
[    2.905037] sched_clock: Marking stable (2902588329, 2432403)->(3021466340, -116445608)
[    2.905184] registered taskstats version 1
[    2.905184] Loading compiled-in X.509 certificates
[    2.905198] zswap: loaded using pool lzo/zbud
[    2.905256] ima: No TPM chip found, activating TPM-bypass!
[    2.905257] ima: Allocated hash algorithm: sha256
[    2.905515] rtc_cmos 00:01: setting system clock to 2018-12-24 17:02:00 UTC (1545670920)
[    2.907302] Freeing unused kernel image memory: 872K
[    2.926667] Write protecting kernel text and read-only data: 8716k
[    2.926668] NX-protecting the kernel data: 5656k
[    2.927172] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.927196] x86/mm: Checking user space page tables
[    2.927290] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.927291] Run /init as init process
[    3.015259] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.015367] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.016445] random: udevadm: uninitialized urandom read (16 bytes read)
[    3.050140] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    3.050157] ACPI: Power Button [PWRB]
[    3.051168] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    3.052094] ACPI: Power Button [PWRF]
[    3.061990] pps_core: LinuxPPS API ver. 1 registered
[    3.061992] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    3.062385] PTP clock support registered
[    3.064650] tg3.c:v3.137 (May 11, 2014)
[    3.068227] ACPI: bus type USB registered
[    3.068270] usbcore: registered new interface driver usbfs
[    3.068285] usbcore: registered new interface driver hub
[    3.069728] usbcore: registered new device driver usb
[    3.074305] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.074602] ehci-pci: EHCI PCI platform driver
[    3.074806] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    3.074814] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    3.074828] ehci-pci 0000:00:1d.7: debug port 1
[    3.078751] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    3.079216] uhci_hcd: USB Universal Host Controller Interface driver
[    3.079525] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9f7c00
[    3.079526] pci 0000:00:00.0: Intel G41 Chipset
[    3.079544] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    3.079548] pmd_set_huge: Cannot satisfy [mem 0xfe600000-0xfe800000] with a huge-page mapping due to MTRR override.
[    3.079993] pci 0000:00:00.0: detected 32768K stolen memory
[    3.080021] libphy: tg3 mdio bus: probed
[    3.080038] [drm] Replacing VGA console driver
[    3.080637] Console: switching to colour dummy device 80x25
[    3.081077] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.081077] [drm] Driver supports precise vblank timestamp query.
[    3.081371] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.083325] SCSI subsystem initialized
[    3.083988] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    3.085661] libata version 3.00 loaded.
[    3.086015] ata_piix 0000:00:1f.2: version 2.13
[    3.086098] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    3.087385] scsi host0: ata_piix
[    3.087496] scsi host1: ata_piix
[    3.087543] ata1: SATA max UDMA/133 cmd 0xe080 ctl 0xe000 bmdma 0xd800 irq 19
[    3.087544] ata2: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd808 irq 19
[    3.101704] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.102248] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
[    3.102250] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.102252] usb usb1: Product: EHCI Host Controller
[    3.102253] usb usb1: Manufacturer: Linux 4.20.0-sparky-686-pae ehci_hcd
[    3.102255] usb usb1: SerialNumber: 0000:00:1d.7
[    3.102558] hub 1-0:1.0: USB hub found
[    3.102899] hub 1-0:1.0: 8 ports detected
[    3.104169] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.104176] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.104181] uhci_hcd 0000:00:1d.0: detected 2 ports
[    3.104203] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e880
[    3.104257] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.20
[    3.104259] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.104260] usb usb2: Product: UHCI Host Controller
[    3.104261] usb usb2: Manufacturer: Linux 4.20.0-sparky-686-pae uhci_hcd
[    3.104263] usb usb2: SerialNumber: 0000:00:1d.0
[    3.104375] hub 2-0:1.0: USB hub found
[    3.104383] hub 2-0:1.0: 2 ports detected
[    3.104627] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.104632] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    3.104637] uhci_hcd 0000:00:1d.1: detected 2 ports
[    3.104656] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
[    3.104706] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.20
[    3.104708] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.104709] usb usb3: Product: UHCI Host Controller
[    3.104710] usb usb3: Manufacturer: Linux 4.20.0-sparky-686-pae uhci_hcd
[    3.104712] usb usb3: SerialNumber: 0000:00:1d.1
[    3.104820] hub 3-0:1.0: USB hub found
[    3.104827] hub 3-0:1.0: 2 ports detected
[    3.105040] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.105045] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    3.105050] uhci_hcd 0000:00:1d.2: detected 2 ports
[    3.105076] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e480
[    3.105125] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.20
[    3.105127] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.105128] usb usb4: Product: UHCI Host Controller
[    3.105129] usb usb4: Manufacturer: Linux 4.20.0-sparky-686-pae uhci_hcd
[    3.105131] usb usb4: SerialNumber: 0000:00:1d.2
[    3.105240] hub 4-0:1.0: USB hub found
[    3.105247] hub 4-0:1.0: 2 ports detected
[    3.105468] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.105473] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    3.105478] uhci_hcd 0000:00:1d.3: detected 2 ports
[    3.105495] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400
[    3.105542] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.20
[    3.105543] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.105545] usb usb5: Product: UHCI Host Controller
[    3.105546] usb usb5: Manufacturer: Linux 4.20.0-sparky-686-pae uhci_hcd
[    3.105547] usb usb5: SerialNumber: 0000:00:1d.3
[    3.105659] hub 5-0:1.0: USB hub found
[    3.105666] hub 5-0:1.0: 2 ports detected
[    3.112745] Broadcom BCM57780 300:01: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=300:01, irq=POLL)
[    3.113042] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM57788) rev 57780001] (PCI Express) MAC address 84:2b:2b:88:e6:63
[    3.113044] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    3.113046] tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    3.128137] [drm] RC6 disabled, disabling runtime PM support
[    3.128823] [drm] Initialized i915 1.6.0 20180921 for 0000:00:02.0 on minor 0
[    3.215314] fbcon: inteldrmfb (fb0) is primary device
[    3.238003] Console: switching to colour frame buffer device 170x48
[    3.261069] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.262017] ata1.00: ATA-8: WDC WD3200AAKS-75L9A0, 02.03E02, max UDMA/133
[    3.262021] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.265732] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200AAKS-7 3E02 PQ: 0 ANSI: 5
[    3.282755] ata2.01: ATAPI: PLDS DVD+/-RW DH-16ABS, PD11, max UDMA/100
[    3.289262] scsi 1:0:1:0: CD-ROM            PLDS     DVD+-RW DH-16ABS PD11 PQ: 0 ANSI: 5
[    3.320964] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    3.320976] sd 0:0:0:0: [sda] Write Protect is off
[    3.320978] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.320997] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.351747]  sda: sda1 sda2 sda3
[    3.352076] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.358314] sr 1:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.358318] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.358737] sr 1:0:1:0: Attached scsi CD-ROM sr0
[    3.578638] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[    3.742647] random: fast init done
[    3.770665] usb 3-1: New USB device found, idVendor=09da, idProduct=c10a, bcdDevice=10.31
[    3.770670] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.770674] usb 3-1: Product: USB Mouse
[    3.770677] usb 3-1: Manufacturer: A4Tech
[    3.775279] hidraw: raw HID events driver (C) Jiri Kosina
[    3.791196] usbcore: registered new interface driver usbhid
[    3.791197] usbhid: USB HID core driver
[    3.792158] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:09DA:C10A.0001/input/input5
[    3.792235] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:09DA:C10A.0001/input/input6
[    3.792311] hid-generic 0003:09DA:C10A.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.1-1/input0
[    3.978623] raid6: mmxx1    gen()  3631 MB/s
[    4.046628] raid6: mmxx2    gen()  4092 MB/s
[    4.114629] raid6: sse1x1   gen()  2325 MB/s
[    4.182636] raid6: sse1x2   gen()  3053 MB/s
[    4.250622] raid6: sse2x1   gen()  4130 MB/s
[    4.318617] raid6: sse2x1   xor()  4894 MB/s
[    4.386620] raid6: sse2x2   gen()  5638 MB/s
[    4.454617] raid6: sse2x2   xor()  5869 MB/s
[    4.454618] raid6: using algorithm sse2x2 gen() 5638 MB/s
[    4.454619] raid6: .... xor() 5869 MB/s, rmw enabled
[    4.454620] raid6: using ssse3x1 recovery algorithm
[    4.456702] xor: measuring software checksum speed
[    4.494617]    pIII_sse  : 10095.000 MB/sec
[    4.534615]    prefetch64-sse: 11420.000 MB/sec
[    4.534616] xor: using function: prefetch64-sse (11420.000 MB/sec)
[    4.544648] Btrfs loaded, crc32c=crc32c-generic
[    4.718659] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[    4.842643] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    4.949651] usb 4-1: New USB device found, idVendor=413c, idProduct=2106, bcdDevice= 1.50
[    4.949656] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.949659] usb 4-1: Product: Dell QuietKey Keyboard
[    4.949662] usb 4-1: Manufacturer: Dell
[    4.985478] input: Dell Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/0003:413C:2106.0002/input/input7
[    5.042849] hid-generic 0003:413C:2106.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell QuietKey Keyboard] on usb-0000:00:1d.2-1/input0
[    6.052152] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    6.070766] systemd[1]: Detected architecture x86.
[    6.086831] systemd[1]: Set hostname to <star>.
[    6.676387] random: crng init done
[    6.676391] random: 7 urandom warning(s) missed due to ratelimiting
[    6.988898] systemd[1]: Listening on Journal Socket.
[    6.989148] systemd[1]: Created slice User and Session Slice.
[    6.989214] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.989309] systemd[1]: Listening on Journal Audit Socket.
[    6.989500] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.989553] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.989604] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.440438] EXT4-fs (sda3): re-mounted. Opts: (null)
[    7.583487] lp: driver loaded but no devices found
[    7.660359] systemd-journald[212]: Received request to flush runtime journal from PID 1
[    7.806233] ppdev: user-space parallel port driver
[    7.809777] RPC: Registered named UNIX socket transport module.
[    7.809778] RPC: Registered udp transport module.
[    7.809779] RPC: Registered tcp transport module.
[    7.809779] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    8.051828] loop: module loaded
[   11.229003] media: loading out-of-tree module taints kernel.
[   11.229801] media: Linux media interface: v0.10
[   11.331904] intel_rng: FWH not detected
[   11.501637] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   11.501673] sr 1:0:1:0: Attached scsi generic sg1 type 5
[   11.571476] videodev: Linux video capture interface: v2.00
[   11.571479] WARNING: You are using an experimental version of the media stack.
                As the driver is backported to an older kernel, it doesn't offer
                enough quality for its usage in production.
                Use it with care.
               Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
                669e3e92cc0fc4ce9039bd11cfb7f2e554c34e70 stid135: Move NOSYNC mode selection for TS.
[   11.685082] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   11.773588] Error: Driver 'pcspkr' is already registered, aborting...
[   11.779216] leds_ss4200: no LED devices found
[   12.039452] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[   12.243246] WARNING: You are using an experimental version of the media stack.
                As the driver is backported to an older kernel, it doesn't offer
                enough quality for its usage in production.
                Use it with care.
               Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
                669e3e92cc0fc4ce9039bd11cfb7f2e554c34e70 stid135: Move NOSYNC mode selection for TS.
[   12.507297] TBSECP3 driver 0000:02:00.0: TurboSight TBS 6903 DVB-S/S2
[   12.507760] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter)
[   12.565089] iTCO_vendor_support: vendor-support=0
[   12.608400] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   12.608451] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[   12.608559] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   12.629218] TBSECP3 driver 0000:02:00.0: MAC address 00:22:ab:f0:be:72
[   12.654990] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   12.654993] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.654995] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   12.654996] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[   12.654997] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[   12.654999] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[   12.655001] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[   12.655002] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[   12.667028] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   12.667158] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.667241] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   12.667325] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   12.668058] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   13.056557] stv0910: found STV0910 id=0x51
[   13.129027] TBSECP3 driver 0000:02:00.0: DVB: registering adapter 0 frontend 0 (TurboSight TBS 6903 DVB-S/S2 )...
[   13.129134] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter)
[   13.237286] TBSECP3 driver 0000:02:00.0: MAC address 00:22:ab:f0:be:73
[   13.237305] TBSECP3 driver 0000:02:00.0: DVB: registering adapter 1 frontend 0 (TurboSight TBS 6903 DVB-S/S2 )...
[   13.237426] TBSECP3 driver 0000:02:00.0: TurboSight TBS 6903 DVB-S/S2 : PCI 0000:02:00.0, IRQ 28, MMIO 0xfeac0000
[   13.247358] intel_powerclamp: No package C-state available
[   13.291023] intel_powerclamp: No package C-state available
[   17.158724] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.188607] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.211591] tg3 0000:03:00.0 eth0: Link is down
[   19.235753] tg3 0000:03:00.0 eth0: Link is up at 100 Mbps, full duplex
[   19.235756] tg3 0000:03:00.0 eth0: Flow control is on for TX and on for RX
[   19.235767] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   23.149354] fuse init (API version 7.28)
root@star:/home/star#




Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 24 Aralık 2018 - 20:34:18


Kod Seç
star@star:~$ sudo -s
[sudo] password for star:
root@star:/home/star# uname -r
4.20.0-sparky-686-pae
root@star:/home/star# uname -a
Linux star 4.20.0-sparky-686-pae #1 SMP Mon Dec 24 11:39:28 CET 2018 i686 GNU/Linux
root@star:/home/star# dmesg | grep TBS
[   12.507297] TBSECP3 driver 0000:02:00.0: TurboSight TBS 6903 DVB-S/S2
[   12.507760] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter)
[   12.629218] TBSECP3 driver 0000:02:00.0: MAC address 00:22:ab:f0:be:72
[   13.129027] TBSECP3 driver 0000:02:00.0: DVB: registering adapter 0 frontend 0 (TurboSight TBS 6903 DVB-S/S2 )...
[   13.129134] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter)
[   13.237286] TBSECP3 driver 0000:02:00.0: MAC address 00:22:ab:f0:be:73
[   13.237305] TBSECP3 driver 0000:02:00.0: DVB: registering adapter 1 frontend 0 (TurboSight TBS 6903 DVB-S/S2 )...
[   13.237426] TBSECP3 driver 0000:02:00.0: TurboSight TBS 6903 DVB-S/S2 : PCI 0000:02:00.0, IRQ 28, MMIO 0xfeac0000
root@star:/home/star#


NOT: Yukarıda nasıl yapılacağı anlatılmış yardımcı olursanız belki çalıştıra bilirim dosya nasıl açacağım ve neyin içine kaydedeceğim pek bilmiyorum


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 24 Aralık 2018 - 21:08:12



slm dediklerinizi yaptım ama benim modül içinden çıkmadı


Kod Seç
star@star:~$ sudo -s
[sudo] password for star:
root@star:/home/star# modinfo saa716x_tbs-dvb
filename:       /lib/modules/4.20.0-sparky-686-pae/kernel/drivers/media/pci/saa716x/saa716x_tbs-dvb.ko
license:        GPL
author:         Manu Abraham
description:    SAA716x Budget driver
alias:          pci:v00001131d00007160sv00006290sd00000001bc*sc*i*
alias:          pci:v00001131d00007160sv00007220sd00000001bc*sc*i*
alias:          pci:v00001131d00007160sv00006983sd00000002bc*sc*i*
alias:          pci:v00001131d00007160sv00006983sd00000001bc*sc*i*
alias:          pci:v00001131d00007160sv000013C2sd00003010bc*sc*i*
alias:          pci:v00001131d00007160sv00006991sd00000002bc*sc*i*
alias:          pci:v00001131d00007160sv00006991sd00000001bc*sc*i*
alias:          pci:v00001131d00007160sv00006985sd00000002bc*sc*i*
alias:          pci:v00001131d00007160sv00006985sd00000001bc*sc*i*
alias:          pci:v00001131d00007160sv00006984sd00000013bc*sc*i*
alias:          pci:v00001131d00007160sv00006982sd00000002bc*sc*i*
alias:          pci:v00001131d00007160sv00006982sd00000001bc*sc*i*
alias:          pci:v00001131d00007160sv00006925sd00000001bc*sc*i*
alias:          pci:v00001131d00007160sv00006923sd00000001bc*sc*i*
alias:          pci:v00001131d00007160sv00006922sd00000001bc*sc*i*
alias:          pci:v00001131d00007160sv00006221sd00000001bc*sc*i*
alias:          pci:v00001131d00007160sv00006220sd00000002bc*sc*i*
alias:          pci:v00001131d00007160sv00006285sd00000001bc*sc*i*
alias:          pci:v00001131d00007160sv00006281sd00000001bc*sc*i*
alias:          pci:v00001131d00007160sv00006280sd00000011bc*sc*i*
alias:          pci:v00001131d00007160sv00006284sd00000001bc*sc*i*
alias:          pci:v00001131d00007160sv00001AE4sd00000700bc*sc*i*
alias:          pci:v00001131d00007160sv00001894sd00000110bc*sc*i*
alias:          pci:v00001131d00007160sv00001822sd00000047bc*sc*i*
alias:          pci:v00001131d00007160sv00001822sd00000039bc*sc*i*
alias:          pci:v00001131d00007160sv00001822sd00000044bc*sc*i*
depends:        saa716x_core,dvb-core,tas2101,i2c-algo-bit,cx24117
name:           saa716x_tbs_dvb
vermagic:       4.20.0-sparky-686-pae SMP mod_unload modversions 686
parm:           verbose:verbose startup messages, default is 1 (yes) (int)
parm:           int_type:force Interrupt Handler type: 0=INT-A, 1=MSI, 2=MSI-X. default INT-A mode (int)



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 24 Aralık 2018 - 21:21:32



hocam bunu nasıl yapmam lazım


#!/bin/bash

ncpus=`grep -ciw ^processor /proc/cpuinfo`
test "$ncpus" -gt 1 || exit 1
n=0

for irq in `cat /proc/interrupts | grep 'tbsecp3' | awk '{print $1}' | sed s/\://g` ; do
    f="/proc/irq/$irq/smp_affinity"
    test -r "$f" || continue
    cpu=$[$ncpus - ($n % $ncpus) - 1]
    if [ $cpu -ge 0 ] ; then
        mask=`printf %x $[2 ** $cpu]`
        echo "Assign SMP affinity: dvb$n, irq $irq, cpu $cpu, mask 0x$mask"
        echo "$mask" > "$f"
        let n+=1
    fi
done


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 24 Aralık 2018 - 22:05:06


hocam bunu nasıl dosya şeklinde oluşturacağım lütfen yardımcı olurmusunuz

Kod Seç
root@star:/home/star# modinfo tbsecp3
filename:       /lib/modules/4.20.0-sparky-686-pae/kernel/drivers/media/pci/tbsecp3/tbsecp3.ko
license:        GPL
description:    TBS ECP3 driver
author:         Luis Alves <ljalvs@gmail.com>
alias:          pci:v0000544Dd00006178sv00006904sd00002000bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006903sd00000020bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006909sd00000010bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006308sd*bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006304sd*bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006301sd*bc*sc*i*
alias:          pci:v0000544Dd00006178sv0000690Asd*bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006514sd*bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006814sd*bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006704sd*bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006910sd*bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006909sd00000001bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006908sd*bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006905sd*bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006904sd00001131bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006904sd00000001bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006903sd00000001bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006902sd*bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006590sd*bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006528sd*bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006522sd*bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006209sd*bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006290sd*bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006281sd*bc*sc*i*
alias:          pci:v0000544Dd00006178sv00006205sd*bc*sc*i*
depends:        dvb-core,tas2101
name:           tbsecp3
vermagic:       4.20.0-sparky-686-pae SMP mod_unload modversions 686
parm:           adapter_nr:DVB adapter numbers (array of short)
parm:           dma_pkts:DMA buffer size in TS packets (16-256), default 128 (array of int)
parm:           enable_msi:use an msi interrupt if available (bool)
root@star:/home/star#

if

#3
30 Aralık 2018 - 18:36:03
Kod Seç

echo "options saa716x_tbs-dvb int_type=1" | sudo tee -a /etc/modprobe.d/tbs.conf


Komutu ile size söyleneni yapmış olursunuz. Bu çekirdek parametresinin etki edebilmesi için sistemi yeniden başlatmanız gerek.
Yazdır
Yukarı git Sayfa1
Kullanıcı Eylemleri