Ubuntu 18.04 RTL8192 Wireless Sorunu

Başlatan mesute, 02 Aralık 2018 - 15:32:04

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

mesute

Hatta kopmalar oluyor özellikle ubuntu software den veri indirince oluyor bu çıktılar şöyle


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 02 Aralık 2018 - 15:33:19

erden@erden-System-Product-Name:~$ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.15.0-39-generic root=UUID=ddd6a7f8-d636-4a92-b8cd-8ea1accaf529 ro quiet splash vt.handoff=1
erden@erden-System-Product-Name:~$ uname -a
Linux erden-System-Product-Name 4.15.0-39-generic #42-Ubuntu SMP Tue Oct 23 15:48:01 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 02 Aralık 2018 - 15:34:02


erden@erden-System-Product-Name:~$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Z77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GK106 [GeForce GTX 660] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GK106 HDMI Audio Controller (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 09)
04:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03)



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 02 Aralık 2018 - 15:34:29

erden@erden-System-Product-Name:~$ lsusb
Bus 002 Device 003: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 003 Device 002: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 02 Aralık 2018 - 15:35:07

erden@erden-System-Product-Name:~$ rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
erden@erden-System-Product-Name:~$ sudo lshw -C network
[sudo] password for erden:
  *-network                 
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: enp3s0
       version: 09
       serial: 60:a4:4c:59:12:6f
       size: 100Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8168 driverversion=8.045.08-NAPI duplex=half latency=0 link=no multicast=yes port=twisted pair speed=100Mbit/s
       resources: irq:26 ioport:d000(size=256) memory:f2104000-f2104fff memory:f2100000-f2103fff
  *-network
       description: Wireless interface
       physical id: 2
       bus info: usb@3:3
       logical name: wlx081076fa73ae
       serial: 08:10:76:fa:73:ae
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rtl8xxxu driverversion=4.15.0-39-generic firmware=N/A ip=192.168.1.20 link=yes multicast=yes wireless=IEEE 802.11



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 02 Aralık 2018 - 15:35:44

erden@erden-System-Product-Name:~$ ifconfig

Command 'ifconfig' not found, but can be installed with:

sudo apt install net-tools

erden@erden-System-Product-Name:~$ iwconfig
lo        no wireless extensions.

enp3s0    no wireless extensions.

wlx081076fa73ae  IEEE 802.11  ESSID:"SUPERONLINE_WiFi_3532" 
          Mode:Managed  Frequency:2.412 GHz  Access Point: E4:FB:5D:20:4F:29   
          Bit Rate=1 Mb/s   Tx-Power=20 dBm   
          Retry short limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:off
          Link Quality=66/70  Signal level=-44 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:137   Missed beacon:0



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 02 Aralık 2018 - 15:36:06

erden@erden-System-Product-Name:~$ iwlist scanning
lo        Interface doesn't support scanning.

enp3s0    Interface doesn't support scanning.

wlx081076fa73ae  Scan completed :
          Cell 01 - Address: E4:FB:5D:20:4F:29
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    Quality=66/70  Signal level=-44 dBm 
                    Encryption key:on
                    ESSID:"SUPERONLINE_WiFi_3532"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000588eb8a0d1
                    Extra: Last beacon: 213868ms ago
                    IE: Unknown: 001553555045524F4E4C494E455F576946695F33353332
                    IE: Unknown: 010882848B960C121824
                    IE: Unknown: 030101
                    IE: Unknown: 2A0100
                    IE: Unknown: 32043048606C
                    IE: Unknown: 2D1A8E191FFFFF000000000000000000000000000000001804810000
                    IE: Unknown: 3D1601000000000000000000000000000000000000000000
                    IE: Unknown: 4A0E14000A00B400C800140005001900
                    IE: Unknown: 7F0101
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : TKIP CCMP
                        Authentication Suites (1) : PSK
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : TKIP CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
                    IE: Unknown: DD1E00904C338E191FFFFF000000000000000000000000000000001804810000
                    IE: Unknown: DD1A00904C3401000000000000000000000000000000000000000000
                    IE: Unknown: 0706545220010D14
                    IE: Unknown: DD0600E04C020160
                    IE: Unknown: DDA60050F204104A0001101044000102103B0001031047001063041253101920061228E4FB5D204F2D1021001B5265616C74656B2053656D69636F6E647563746F7220436F72702E1023000752544C387878781024000D45562D323031302D30392D32301042000F3132333435363738393031323334371054000800060050F2040001101100114144534C204D6F64656D2F526F757465721008000206801049000600372A000120




Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 02 Aralık 2018 - 15:36:37

erden@erden-System-Product-Name:~$ lsmod
Module                  Size  Used by
ccm                    20480  3
rtl8192cu              94208  0
rtl_usb                20480  1 rtl8192cu
rtl8192c_common        69632  1 rtl8192cu
rtlwifi               163840  3 rtl8192c_common,rtl_usb,rtl8192cu
arc4                   16384  2
rtl8xxxu              122880  0
joydev                 24576  0
mac80211              778240  4 rtl_usb,rtl8192cu,rtlwifi,rtl8xxxu
input_leds             16384  0
cfg80211              622592  2 rtlwifi,mac80211
eeepc_wmi              16384  0
asus_wmi               28672  1 eeepc_wmi
sparse_keymap          16384  1 asus_wmi
wmi_bmof               16384  0
snd_hda_codec_hdmi     49152  1
intel_rapl             20480  0
x86_pkg_temp_thermal    16384  0
intel_powerclamp       16384  0
coretemp               16384  0
kvm                   598016  0
irqbypass              16384  1 kvm
crct10dif_pclmul       16384  0
crc32_pclmul           16384  0
ghash_clmulni_intel    16384  0
pcbc                   16384  0
aesni_intel           188416  2
aes_x86_64             20480  1 aesni_intel
crypto_simd            16384  1 aesni_intel
glue_helper            16384  1 aesni_intel
cryptd                 24576  3 crypto_simd,ghash_clmulni_intel,aesni_intel
intel_cstate           20480  0
intel_rapl_perf        16384  0
snd_hda_codec_realtek   106496  1
snd_hda_codec_generic    73728  1 snd_hda_codec_realtek
snd_hda_intel          40960  8
snd_hda_codec         126976  4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
snd_hda_core           81920  5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
snd_hwdep              20480  1 snd_hda_codec
snd_pcm                98304  4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                65536  2 snd_seq_midi,snd_seq_midi_event
snd_seq_device         16384  3 snd_seq,snd_seq_midi,snd_rawmidi
snd_timer              32768  2 snd_seq,snd_pcm
ie31200_edac           16384  0
snd                    81920  27 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm,snd_rawmidi
mei_me                 40960  0
mei                    90112  1 mei_me
lpc_ich                24576  0
shpchp                 36864  0
soundcore              16384  1 snd
mac_hid                16384  0
wmi                    24576  2 asus_wmi,wmi_bmof
nvidia_uvm            757760  0
sch_fq_codel           20480  6
parport_pc             36864  0
ppdev                  20480  0
lp                     20480  0
parport                49152  3 parport_pc,lp,ppdev
ip_tables              28672  0
x_tables               40960  1 ip_tables
autofs4                40960  2
hid_generic            16384  0
usbhid                 49152  0
hid                   118784  2 usbhid,hid_generic
nvidia_drm             40960  2
nvidia_modeset       1110016  7 nvidia_drm
nvidia              14340096  441 nvidia_uvm,nvidia_modeset
drm_kms_helper        172032  1 nvidia_drm
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
drm                   401408  5 drm_kms_helper,nvidia_drm
ipmi_devintf           20480  0
ahci                   36864  1
libahci                32768  1 ahci
r8168                 524288  0
ipmi_msghandler        53248  2 ipmi_devintf,nvidia
video                  45056  1 asus_wmi



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 02 Aralık 2018 - 15:37:43

erden@erden-System-Product-Name:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x20, date = 2018-04-10
[    0.000000] Linux version 4.15.0-39-generic (buildd@lgw01-amd64-054) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #42-Ubuntu SMP Tue Oct 23 15:48:01 UTC 2018 (Ubuntu 4.15.0-39.42-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-39-generic root=UUID=ddd6a7f8-d636-4a92-b8cd-8ea1accaf529 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd79bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dd79c000-0x00000000ddc1efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ddc1f000-0x00000000ddc2efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000ddc2f000-0x00000000ddd51fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ddd52000-0x00000000de81bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000de81c000-0x00000000de81cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000de81d000-0x00000000de85ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000de860000-0x00000000dec7ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dec80000-0x00000000deff3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: System manufacturer System Product Name/Z77-A, BIOS 0402 01/18/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FF0000000 write-back
[    0.000000]   2 base 210000000 mask FF8000000 write-back
[    0.000000]   3 base 218000000 mask FFC000000 write-back
[    0.000000]   4 base 21C000000 mask FFE000000 write-back
[    0.000000]   5 base 21E000000 mask FFF000000 write-back
[    0.000000]   6 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000000] total RAM covered: 8176M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 32M num_reg: 6  lose cover RAM: 0G
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd830-0x000fd83f] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] BRK [0xc0d3f000, 0xc0d3ffff] PGTABLE
[    0.000000] BRK [0xc0d40000, 0xc0d40fff] PGTABLE
[    0.000000] BRK [0xc0d41000, 0xc0d41fff] PGTABLE
[    0.000000] BRK [0xc0d42000, 0xc0d42fff] PGTABLE
[    0.000000] BRK [0xc0d43000, 0xc0d43fff] PGTABLE
[    0.000000] BRK [0xc0d44000, 0xc0d44fff] PGTABLE
[    0.000000] BRK [0xc0d45000, 0xc0d45fff] PGTABLE
[    0.000000] BRK [0xc0d46000, 0xc0d46fff] PGTABLE
[    0.000000] BRK [0xc0d47000, 0xc0d47fff] PGTABLE
[    0.000000] BRK [0xc0d48000, 0xc0d48fff] PGTABLE
[    0.000000] BRK [0xc0d49000, 0xc0d49fff] PGTABLE
[    0.000000] BRK [0xc0d4a000, 0xc0d4afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3056d000-0x342adfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DDC22080 000074 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DDC2CC28 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DDC22188 00AA9B (v02 ALASKA A M I    00000022 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000DDD50080 000040
[    0.000000] ACPI: APIC 0x00000000DDC2CD38 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DDC2CDB0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000DDC2CDF8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DDC2CE38 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DDC2CE70 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: BGRT 0x00000000DDC2E700 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DDC2D238 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DDC2DBE8 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: DMAR 0x00000000DDC2E680 000080 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21efd1000-0x21effbfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000dd79bfff]
[    0.000000]   node   0: [mem 0x00000000de81c000-0x00000000de81cfff]
[    0.000000]   node   0: [mem 0x00000000de860000-0x00000000dec7ffff]
[    0.000000]   node   0: [mem 0x00000000deff4000-0x00000000deffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[    0.000000] On node 0 totalpages: 2083685
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14128 pages used for memmap
[    0.000000]   DMA32 zone: 904137 pages, LIFO batch:31
[    0.000000]   Normal zone: 18368 pages used for memmap
[    0.000000]   Normal zone: 1175552 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 100 pages
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd79c000-0xddc1efff]
[    0.000000] PM: Registered nosave memory: [mem 0xddc1f000-0xddc2efff]
[    0.000000] PM: Registered nosave memory: [mem 0xddc2f000-0xddd51fff]
[    0.000000] PM: Registered nosave memory: [mem 0xddd52000-0xde81bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xde81d000-0xde85ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdec80000-0xdeff3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2051104
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-39-generic root=UUID=ddd6a7f8-d636-4a92-b8cd-8ea1accaf529 ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8045976K/8334740K available (12300K kernel code, 2472K rwdata, 4248K rodata, 2408K init, 2416K bss, 288764K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39178 entries in 154 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] DMAR: Host address width 36
[    0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[    0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.000000] DMAR: RMRR base: 0x000000ddba1000 end: 0x000000ddbb2fff
[    0.000000] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed90000 IOMMU 0
[    0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[    0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.000000] x2apic enabled
[    0.000000] Switched APIC routing to cluster x2apic.
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 3009.092 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6018.18 BogoMIPS (lpj=12036368)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.028523] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.029029] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.029052] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.029068] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.029239] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.029240] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.029243] mce: CPU supports 9 MCE banks
[    0.029251] CPU0: Thermal monitoring enabled (TM1)
[    0.029259] process: using mwait in idle threads
[    0.029261] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.029261] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.029263] Spectre V2 : Mitigation: Full generic retpoline
[    0.029263] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.029264] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.029264] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.029265] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.029351] Freeing SMP alternatives memory: 36K
[    0.032056] TSC deadline timer enabled
[    0.032058] smpboot: CPU0: Intel(R) Core(TM) i5-3330 CPU @ 3.00GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.032115] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.032134] ... version:                3
[    0.032134] ... bit width:              48
[    0.032134] ... generic registers:      8
[    0.032135] ... value mask:             0000ffffffffffff
[    0.032136] ... max period:             00007fffffffffff
[    0.032136] ... fixed-purpose events:   3
[    0.032137] ... event mask:             00000007000000ff
[    0.032165] Hierarchical SRCU implementation.
[    0.032888] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.032901] smp: Bringing up secondary CPUs ...
[    0.032966] x86: Booting SMP configuration:
[    0.032967] .... node  #0, CPUs:      #1 #2 #3
[    0.040051] smp: Brought up 1 node, 4 CPUs
[    0.040051] smpboot: Max logical packages: 1
[    0.040051] smpboot: Total of 4 processors activated (24072.73 BogoMIPS)
[    0.042485] devtmpfs: initialized
[    0.042485] x86/mm: Memory block size: 128MB
[    0.042485] evm: security.selinux
[    0.042485] evm: security.SMACK64
[    0.042485] evm: security.SMACK64EXEC
[    0.042485] evm: security.SMACK64TRANSMUTE
[    0.042485] evm: security.SMACK64MMAP
[    0.042485] evm: security.apparmor
[    0.042485] evm: security.ima
[    0.042485] evm: security.capability
[    0.042485] PM: Registering ACPI NVS region [mem 0xddc2f000-0xddd51fff] (1191936 bytes)
[    0.042485] PM: Registering ACPI NVS region [mem 0xde81d000-0xde85ffff] (274432 bytes)
[    0.042485] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.042485] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.042485] pinctrl core: initialized pinctrl subsystem
[    0.042485] RTC time: 12:12:21, date: 12/02/18
[    0.042485] NET: Registered protocol family 16
[    0.042485] audit: initializing netlink subsys (disabled)
[    0.042485] audit: type=2000 audit(1543752741.040:1): state=initialized audit_enabled=0 res=1
[    0.042485] cpuidle: using governor ladder
[    0.042485] cpuidle: using governor menu
[    0.042485] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.042485] ACPI: bus type PCI registered
[    0.042485] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.042485] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.042485] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.042485] PCI: Using configuration type 1 for base access
[    0.044031] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.045003] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.045004] ACPI: Added _OSI(Module Device)
[    0.045004] ACPI: Added _OSI(Processor Device)
[    0.045004] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.045004] ACPI: Added _OSI(Processor Aggregator Device)
[    0.045004] ACPI: Added _OSI(Linux-Dell-Video)
[    0.045004] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.045004] ACPI: Executed 1 blocks of module-level executable AML code
[    0.050299] ACPI: Dynamic OEM Table Load:
[    0.050299] ACPI: SSDT 0xFFFF9F3694CE2000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.050299] ACPI: Dynamic OEM Table Load:
[    0.050299] ACPI: SSDT 0xFFFF9F3694F57000 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.050299] ACPI: Dynamic OEM Table Load:
[    0.050299] ACPI: SSDT 0xFFFF9F3694E86400 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.052926] ACPI: Interpreter enabled
[    0.052945] ACPI: (supports S0 S3 S4 S5)
[    0.052946] ACPI: Using IOAPIC for interrupt routing
[    0.052973] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.053264] ACPI: Enabled 10 GPEs in block 00 to 3F
[    0.061318] ACPI: Power Resource [FN00] (off)
[    0.061404] ACPI: Power Resource [FN01] (off)
[    0.061489] ACPI: Power Resource [FN02] (off)
[    0.061575] ACPI: Power Resource [FN03] (off)
[    0.061658] ACPI: Power Resource [FN04] (off)
[    0.062353] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.062358] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.062671] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.062870] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.062871] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.063442] PCI host bridge to bus 0000:00
[    0.063445] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.063446] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.063447] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.063448] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.063449] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.063451] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.063452] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.063453] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.063454] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.063455] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.063457] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.063464] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[    0.063558] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.063589] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.063693] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.063716] pci 0000:00:14.0: reg 0x10: [mem 0xf7100000-0xf710ffff 64bit]
[    0.063783] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.063867] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.063891] pci 0000:00:16.0: reg 0x10: [mem 0xf711a000-0xf711a00f 64bit]
[    0.063962] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.064050] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.064070] pci 0000:00:1a.0: reg 0x10: [mem 0xf7118000-0xf71183ff]
[    0.064152] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.064236] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.064256] pci 0000:00:1b.0: reg 0x10: [mem 0xf7110000-0xf7113fff 64bit]
[    0.064327] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.064420] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.064559] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.064660] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[    0.064741] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.064828] pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
[    0.064908] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.064998] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.065019] pci 0000:00:1d.0: reg 0x10: [mem 0xf7117000-0xf71173ff]
[    0.065100] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.065184] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
[    0.065364] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[    0.065380] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.065387] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.065394] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.065400] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.065407] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.065414] pci 0000:00:1f.2: reg 0x24: [mem 0xf7116000-0xf71167ff]
[    0.065452] pci 0000:00:1f.2: PME# supported from D3hot
[    0.065528] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.065545] pci 0000:00:1f.3: reg 0x10: [mem 0xf7115000-0xf71150ff 64bit]
[    0.065564] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.065691] pci 0000:01:00.0: [10de:11c0] type 00 class 0x030000
[    0.065706] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.065714] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[    0.065723] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.065729] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.065734] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.065739] pci 0000:01:00.0: enabling Extended Tags
[    0.065816] pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
[    0.065829] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.065861] pci 0000:01:00.1: enabling Extended Tags
[    0.076023] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.076027] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.076030] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.076034] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.076110] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.076190] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.076224] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.076257] pci 0000:03:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[    0.076278] pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    0.076400] pci 0000:03:00.0: supports D1 D2
[    0.076401] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.088027] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.088031] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.088041] pci 0000:00:1c.4:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.088115] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[    0.088272] pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode)
[    0.088281] pci 0000:00:1c.5:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.088283] pci 0000:00:1c.5:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.088284] pci 0000:00:1c.5:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.088285] pci 0000:00:1c.5:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.088286] pci 0000:00:1c.5:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.088287] pci 0000:00:1c.5:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.088288] pci 0000:00:1c.5:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.088289] pci 0000:00:1c.5:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.088290] pci 0000:00:1c.5:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.088291] pci 0000:00:1c.5:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[    0.088398] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[    0.088418] pci 0000:04:00.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.088419] pci 0000:04:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.088420] pci 0000:04:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.088422] pci 0000:04:00.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.088423] pci 0000:04:00.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.088424] pci 0000:04:00.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.088425] pci 0000:04:00.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.088426] pci 0000:04:00.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.088427] pci 0000:04:00.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.088428] pci 0000:04:00.0:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[    0.088996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.089064] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.089130] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 10 11 12 14 15)
[    0.089196] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.089264] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.089331] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15)
[    0.089397] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 *14 15)
[    0.089462] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.089875] SCSI subsystem initialized
[    0.089886] libata version 3.00 loaded.
[    0.089886] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.089886] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.089886] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.089886] vgaarb: loaded
[    0.089886] ACPI: bus type USB registered
[    0.089886] usbcore: registered new interface driver usbfs
[    0.089886] usbcore: registered new interface driver hub
[    0.089886] usbcore: registered new device driver usb
[    0.089886] EDAC MC: Ver: 3.0.0
[    0.089886] PCI: Using ACPI for IRQ routing
[    0.089886] PCI: pci_cache_line_size set to 64 bytes
[    0.089886] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.089886] e820: reserve RAM buffer [mem 0xdd79c000-0xdfffffff]
[    0.089886] e820: reserve RAM buffer [mem 0xde81d000-0xdfffffff]
[    0.089886] e820: reserve RAM buffer [mem 0xdec80000-0xdfffffff]
[    0.089886] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.089886] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[    0.089886] NetLabel: Initializing
[    0.089886] NetLabel:  domain hash size = 128
[    0.089886] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.089886] NetLabel:  unlabeled traffic allowed by default
[    0.089886] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.089886] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.092002] clocksource: Switched to clocksource hpet
[    0.100406] VFS: Disk quotas dquot_6.6.0
[    0.100419] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.100496] AppArmor: AppArmor Filesystem Enabled
[    0.100520] pnp: PnP ACPI init
[    0.100638] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.100643] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.100722] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.100724] system 00:01: [io  0x1000-0x100f] has been reserved
[    0.100725] system 00:01: [io  0xffff] has been reserved
[    0.100727] system 00:01: [io  0xffff] has been reserved
[    0.100728] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.100729] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.100730] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.100732] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.100735] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.100757] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.100807] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.100810] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.100908] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.100911] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.100963] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.100966] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.101227] pnp 00:06: [dma 0 disabled]
[    0.101272] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.101504] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.101506] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.101507] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.101508] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.101510] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.101511] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.101513] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.101514] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.101515] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.101517] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.101518] system 00:07: [mem 0xe0000000-0xe0000fff] has been reserved
[    0.101521] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.101670] pnp: PnP ACPI: found 8 devices
[    0.107518] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.107564] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.107565] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.107568] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.107570] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.107572] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.107589] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.107591] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.107597] pci 0000:00:1c.4:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.107602] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.107621] pci 0000:00:1c.5: PCI bridge to [bus 04-05]
[    0.107632] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.107633] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.107634] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.107635] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.107636] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.107638] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.107639] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.107640] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.107641] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.107642] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[    0.107643] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.107645] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.107646] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.107647] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.107648] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.107649] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.107651] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.107652] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.107653] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.107654] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.107655] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.107656] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.107657] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.107659] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.107660] pci_bus 0000:04: resource 13 [mem 0xe0000000-0xfeafffff window]
[    0.107661] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.107662] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.107663] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.107664] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.107666] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.107667] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.107668] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.107669] pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.107670] pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.107671] pci_bus 0000:05: resource 13 [mem 0xe0000000-0xfeafffff window]
[    0.107762] NET: Registered protocol family 2
[    0.107903] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.107997] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.108105] TCP: Hash tables configured (established 65536 bind 65536)
[    0.108128] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.108146] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.108184] NET: Registered protocol family 1
[    0.156137] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.156146] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.156177] Unpacking initramfs...
[    0.844812] Freeing initrd memory: 62724K
[    0.844873] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.844876] software IO TLB [mem 0xd979c000-0xdd79c000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.845087] Scanning for low memory corruption every 60 seconds
[    0.845588] Initialise system trusted keyrings
[    0.845595] Key type blacklist registered
[    0.845623] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.846466] zbud: loaded
[    0.846838] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.846934] fuse init (API version 7.26)
[    0.847925] Key type asymmetric registered
[    0.847926] Asymmetric key parser 'x509' registered
[    0.847946] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.847970] io scheduler noop registered
[    0.847971] io scheduler deadline registered
[    0.848010] io scheduler cfq registered (default)
[    0.848561] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    0.848561] vesafb: scrolling: redraw
[    0.848563] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.848570] vesafb: framebuffer at 0xf1000000, mapped to 0x        (ptrval), using 5120k, total 5120k
[    0.848638] Console: switching to colour frame buffer device 160x64
[    0.848656] fb0: VESA VGA frame buffer device
[    0.848666] intel_idle: MWAIT substates: 0x1120
[    0.848667] intel_idle: v0.4.1 model 0x3A
[    0.848767] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.848840] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.848848] ACPI: Power Button [PWRB]
[    0.848875] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.848893] ACPI: Power Button [PWRF]
[    0.849598] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.849754] thermal LNXTHERM:00: registered as thermal_zone0
[    0.849755] ACPI: Thermal Zone [TZ00] (28 C)
[    0.850038] thermal LNXTHERM:01: registered as thermal_zone1
[    0.850038] ACPI: Thermal Zone [TZ01] (30 C)
[    0.850138] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.870652] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.872263] Linux agpgart interface v0.103
[    0.873492] loop: module loaded
[    0.873608] libphy: Fixed MDIO Bus: probed
[    0.873609] tun: Universal TUN/TAP device driver, 1.6
[    0.873634] PPP generic driver version 2.4.2
[    0.873662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.873664] ehci-pci: EHCI PCI platform driver
[    0.873768] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.873773] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.873783] ehci-pci 0000:00:1a.0: debug port 2
[    0.877670] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.877699] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7118000
[    0.892032] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.892086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.892087] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.892088] usb usb1: Product: EHCI Host Controller
[    0.892090] usb usb1: Manufacturer: Linux 4.15.0-39-generic ehci_hcd
[    0.892091] usb usb1: SerialNumber: 0000:00:1a.0
[    0.892249] hub 1-0:1.0: USB hub found
[    0.892255] hub 1-0:1.0: 2 ports detected
[    0.892458] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.892462] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.892473] ehci-pci 0000:00:1d.0: debug port 2
[    0.896377] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.896381] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7117000
[    0.912038] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.912089] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.912090] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.912091] usb usb2: Product: EHCI Host Controller
[    0.912092] usb usb2: Manufacturer: Linux 4.15.0-39-generic ehci_hcd
[    0.912093] usb usb2: SerialNumber: 0000:00:1d.0
[    0.912232] hub 2-0:1.0: USB hub found
[    0.912238] hub 2-0:1.0: 2 ports detected
[    0.912359] ehci-platform: EHCI generic platform driver
[    0.912366] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.912369] ohci-pci: OHCI PCI platform driver
[    0.912375] ohci-platform: OHCI generic platform driver
[    0.912379] uhci_hcd: USB Universal Host Controller Interface driver
[    0.912480] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.912485] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.913557] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[    0.913561] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.913666] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.913667] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.913668] usb usb3: Product: xHCI Host Controller
[    0.913670] usb usb3: Manufacturer: Linux 4.15.0-39-generic xhci-hcd
[    0.913671] usb usb3: SerialNumber: 0000:00:14.0
[    0.913818] hub 3-0:1.0: USB hub found
[    0.913827] hub 3-0:1.0: 4 ports detected
[    0.914167] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.914169] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.914172] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.914196] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.914198] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.914199] usb usb4: Product: xHCI Host Controller
[    0.914200] usb usb4: Manufacturer: Linux 4.15.0-39-generic xhci-hcd
[    0.914201] usb usb4: SerialNumber: 0000:00:14.0
[    0.914347] hub 4-0:1.0: USB hub found
[    0.914356] hub 4-0:1.0: 4 ports detected
[    0.914736] i8042: PNP: No PS/2 controller found.
[    0.914921] mousedev: PS/2 mouse device common for all mice
[    0.915088] rtc_cmos 00:02: RTC can wake from S4
[    0.915200] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.915226] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.915231] i2c /dev entries driver
[    0.915236] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[    0.915278] device-mapper: uevent: version 1.0.3
[    0.915323] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.915327] intel_pstate: Intel P-state driver initializing
[    0.915542] ledtrig-cpu: registered to indicate activity on CPUs
[    0.915971] NET: Registered protocol family 10
[    0.919602] Segment Routing with IPv6
[    0.919617] NET: Registered protocol family 17
[    0.919650] Key type dns_resolver registered
[    0.919841] RAS: Correctable Errors collector initialized.
[    0.919864] microcode: sig=0x306a9, pf=0x2, revision=0x20
[    0.919898] microcode: Microcode Update Driver: v2.2.
[    0.919906] sched_clock: Marking stable (919895223, 0)->(896928352, 22966871)
[    0.920050] registered taskstats version 1
[    0.920059] Loading compiled-in X.509 certificates
[    0.922141] Loaded X.509 cert 'Build time autogenerated kernel key: 28c680bedc8638650c29d29ff1fd33ae66a2014d'
[    0.922158] zswap: loaded using pool lzo/zbud
[    0.925126] Key type big_key registered
[    0.925129] Key type trusted registered
[    0.926571] Key type encrypted registered
[    0.926573] AppArmor: AppArmor sha1 policy hashing enabled
[    0.926575] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.926579] ima: Allocated hash algorithm: sha1
[    0.926599] evm: HMAC attrs: 0x1
[    0.926796]   Magic number: 14:625:227
[    0.926836] acpi PNP0200:00: hash matches
[    0.926897] rtc_cmos 00:02: setting system clock to 2018-12-02 12:12:22 UTC (1543752742)
[    0.926970] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.926970] EDD information not available.
[    0.928640] Freeing unused kernel memory: 2408K
[    0.944064] Write protecting the kernel read-only data: 20480k
[    0.944553] Freeing unused kernel memory: 2008K
[    0.947777] Freeing unused kernel memory: 1896K
[    0.953581] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.953581] x86/mm: Checking user space page tables
[    0.959171] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.023786] ipmi message handler version 39.2
[    1.024339] r8168: loading out-of-tree module taints kernel.
[    1.024428] r8168: module verification failed: signature and/or required key missing - tainting kernel
[    1.024757] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
[    1.026975] ahci 0000:00:1f.2: version 3.0
[    1.027855] ipmi device interface
[    1.037207] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1c impl SATA mode
[    1.037209] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[    1.042116] nvidia: module license 'NVIDIA' taints kernel.
[    1.042117] Disabling lock debugging due to kernel taint
[    1.046768] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[    1.046773] r8168  Copyright (C) 2017  Realtek NIC software team <nicfae@realtek.com>
                This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
                This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[    1.051947] nvidia-nvlink: Nvlink Core is being initialized, major device number 243
[    1.052552] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    1.052603] r8168 0000:03:00.0 enp3s0: renamed from eth0
[    1.052616] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  390.48  Thu Mar 22 00:42:57 PDT 2018 (using threaded interrupts)
[    1.060596] scsi host0: ahci
[    1.060896] scsi host1: ahci
[    1.061059] scsi host2: ahci
[    1.061182] scsi host3: ahci
[    1.061275] scsi host4: ahci
[    1.061331] scsi host5: ahci
[    1.061357] ata1: DUMMY
[    1.061358] ata2: DUMMY
[    1.061360] ata3: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116200 irq 27
[    1.061361] ata4: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116280 irq 27
[    1.061363] ata5: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116300 irq 27
[    1.061363] ata6: DUMMY
[    1.073626] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  390.48  Wed Mar 21 23:48:34 PDT 2018
[    1.074217] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    1.074219] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[    1.232012] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.252011] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[    1.252023] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.374506] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.374530] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.374570] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.374938] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[    1.374947] No Local Variables are initialized for Method [_GTF]
[    1.374948] No Arguments are initialized for method [_GTF]
[    1.374949] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT3._GTF, AE_NOT_FOUND (20170831/psparse-550)
[    1.375233] ata4.00: ATA-8: ST1000DM003-9YN162, CC4B, max UDMA/133
[    1.375236] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.375334] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[    1.375342] No Local Variables are initialized for Method [_GTF]
[    1.375343] No Arguments are initialized for method [_GTF]
[    1.375345] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170831/psparse-550)
[    1.375692] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[    1.375699] No Local Variables are initialized for Method [_GTF]
[    1.375700] No Arguments are initialized for method [_GTF]
[    1.375702] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT3._GTF, AE_NOT_FOUND (20170831/psparse-550)
[    1.375984] ata4.00: configured for UDMA/133
[    1.388512] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.388513] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.388815] hub 1-1:1.0: USB hub found
[    1.388993] hub 1-1:1.0: 6 ports detected
[    1.389595] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[    1.389603] No Local Variables are initialized for Method [_GTF]
[    1.389604] No Arguments are initialized for method [_GTF]
[    1.389614] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT2._GTF, AE_NOT_FOUND (20170831/psparse-550)
[    1.389622] ata3.00: ATAPI: PIONEER DVD-RW  DVR-220L, 1.01, max UDMA/100
[    1.401825] usb 3-3: New USB device found, idVendor=0bda, idProduct=8178
[    1.401829] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.401831] usb 3-3: Product: 802.11n WLAN Adapter
[    1.401833] usb 3-3: Manufacturer: Realtek
[    1.401835] usb 3-3: SerialNumber: 00e04c000001
[    1.402642] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[    1.402650] No Local Variables are initialized for Method [_GTF]
[    1.402651] No Arguments are initialized for method [_GTF]
[    1.402653] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT2._GTF, AE_NOT_FOUND (20170831/psparse-550)
[    1.402663] ata3.00: configured for UDMA/100
[    1.407807] ata5.00: ATA-8: TOSHIBA MK2561GSYN, MH000D, max UDMA/100
[    1.407810] ata5.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.408497] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.408498] scsi 2:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-220L 1.01 PQ: 0 ANSI: 5
[    1.408499] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.408740] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[    1.408748] No Local Variables are initialized for Method [_GTF]
[    1.408749] No Arguments are initialized for method [_GTF]
[    1.408751] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170831/psparse-550)
[    1.408793] hub 2-1:1.0: USB hub found
[    1.408966] hub 2-1:1.0: 8 ports detected
[    1.409008] ata5.00: configured for UDMA/100
[    1.484639] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.484641] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.484839] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.484896] sr 2:0:0:0: Attached scsi generic sg0 type 5
[    1.485204] scsi 3:0:0:0: Direct-Access     ATA      ST1000DM003-9YN1 CC4B PQ: 0 ANSI: 5
[    1.485512] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.485659] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.485661] sd 3:0:0:0: [sda] 4096-byte physical blocks
[    1.485703] sd 3:0:0:0: [sda] Write Protect is off
[    1.485705] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.485729] scsi 4:0:0:0: Direct-Access     ATA      TOSHIBA MK2561GS 0D   PQ: 0 ANSI: 5
[    1.485752] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.485941] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    1.485973] sd 4:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.485984] sd 4:0:0:0: [sdb] Write Protect is off
[    1.485986] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.486008] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.500698]  sda: sda1 sda2 sda3
[    1.501323] sd 3:0:0:0: [sda] Attached SCSI disk
[    1.527988] usb 3-4: new low-speed USB device number 3 using xhci_hcd
[    1.529796]  sdb: sdb1
[    1.530529] sd 4:0:0:0: [sdb] Attached SCSI disk
[    1.679914] usb 3-4: New USB device found, idVendor=046d, idProduct=c077
[    1.679916] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.679917] usb 3-4: Product: USB Optical Mouse
[    1.679918] usb 3-4: Manufacturer: Logitech
[    1.683352] hidraw: raw HID events driver (C) Jiri Kosina
[    1.685906] usbcore: registered new interface driver usbhid
[    1.685906] usbhid: USB HID core driver
[    1.687530] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:046D:C077.0001/input/input2
[    1.687602] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-4/input0
[    1.695953] usb 2-1.7: new full-speed USB device number 3 using ehci-pci
[    1.751657] random: fast init done
[    1.774844] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.774852] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.774926] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.809912] usb 2-1.7: New USB device found, idVendor=045e, idProduct=0745
[    1.809915] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.809917] usb 2-1.7: Product: Microsoft® 2.4GHz Transceiver v7.0
[    1.809919] usb 2-1.7: Manufacturer: Microsoft
[    1.813259] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/0003:045E:0745.0002/input/input3
[    1.851955] tsc: Refined TSC clocksource calibration: 3008.835 MHz
[    1.851965] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b5edf6da48, max_idle_ns: 440795240536 ns
[    1.872161] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:1d.0-1.7/input0
[    1.877576] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/0003:045E:0745.0003/input/input4
[    1.936281] hid-generic 0003:045E:0745.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:1d.0-1.7/input1
[    1.941851] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.2/0003:045E:0745.0004/input/input5
[    2.000256] hid-generic 0003:045E:0745.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:1d.0-1.7/input2
[    2.145961] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    2.876166] clocksource: Switched to clocksource tsc
[    3.732944] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.767642] random: crng init done
[    3.767643] random: 7 urandom warning(s) missed due to ratelimiting
[    3.882347] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    3.922804] systemd[1]: Detected architecture x86-64.
[    3.943553] systemd[1]: Set hostname to <erden-System-Product-Name>.
[    5.649249] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.649397] systemd[1]: Created slice User and Session Slice.
[    5.649411] systemd[1]: Reached target User and Group Name Lookups.
[    5.649544] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.649642] systemd[1]: Created slice System Slice.
[    5.649738] systemd[1]: Listening on Journal Socket.
[    5.650226] systemd[1]: Mounting Huge Pages File System...
[    6.346411] lp: driver loaded but no devices found
[    6.392651] ppdev: user-space parallel port driver
[    6.431686] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[    6.842429] systemd-journald[271]: Received request to flush runtime journal from PID 1
[    9.027952] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k FS
[    9.214841] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 241
[    9.529015] audit: type=1400 audit(1543752751.097:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=394 comm="apparmor_parser"
[    9.529018] audit: type=1400 audit(1543752751.097:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=394 comm="apparmor_parser"
[    9.529019] audit: type=1400 audit(1543752751.097:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=394 comm="apparmor_parser"
[    9.529021] audit: type=1400 audit(1543752751.097:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=394 comm="apparmor_parser"
[    9.530307] audit: type=1400 audit(1543752751.097:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=398 comm="apparmor_parser"
[    9.530309] audit: type=1400 audit(1543752751.097:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=398 comm="apparmor_parser"
[    9.530310] audit: type=1400 audit(1543752751.097:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=398 comm="apparmor_parser"
[    9.536789] audit: type=1400 audit(1543752751.105:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=399 comm="apparmor_parser"
[    9.538852] audit: type=1400 audit(1543752751.105:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=396 comm="apparmor_parser"
[    9.538854] audit: type=1400 audit(1543752751.105:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=396 comm="apparmor_parser"
[    9.569250] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.569442] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[    9.569571] caller os_map_kernel_space.part.7+0xda/0x120 [nvidia] mapping multiple BARs
[    9.569572] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[    9.569577] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.569580] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    9.569583] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.569583] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    9.569586] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.569587] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    9.569590] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.569590] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.582857] resource sanity check: requesting [mem 0x000e0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000e0000-0x000e3fff window]
[    9.582979] caller os_map_kernel_space.part.7+0xda/0x120 [nvidia] mapping multiple BARs
[    9.615620] snd_hda_intel 0000:01:00.1: Disabling MSI
[    9.615623] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    9.630359] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    9.630360] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.630362] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    9.630362] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    9.630363] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    9.630364] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    9.630366] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    9.630367] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    9.630368] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    9.642813] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    9.642851] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    9.642886] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    9.642919] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    9.642952] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    9.774298] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    9.774300] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    9.774301] RAPL PMU: hw unit of domain package 2^-16 Joules
[    9.774301] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    9.810792] AVX version of gcm_enc/dec engaged.
[    9.810792] AES CTR mode by8 optimization enabled
[    9.835296] kvm: disabled by bios
[    9.852142] intel_rapl: Found RAPL domain package
[    9.852142] intel_rapl: Found RAPL domain core
[    9.852146] intel_rapl: RAPL package 0 domain package locked by BIOS
[   10.131837] NVRM: Your system is not currently configured to drive a VGA console
               on the primary VGA device. The NVIDIA Linux graphics driver
               requires the use of a text-mode VGA console. Use of other console
               drivers including, but not limited to, vesafb, may result in
               corruption and stability problems, and is not supported.
[   10.380577] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   10.380619] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   10.380653] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   10.380687] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[   10.950375] asus_wmi: ASUS WMI generic driver loaded
[   10.958173] asus_wmi: Initialization: 0x0
[   10.958206] asus_wmi: BIOS WMI version: 0.9
[   10.958263] asus_wmi: SFUN value: 0x0
[   10.958789] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input15
[   10.958900] asus_wmi: Number of fans: 1
[   11.375239] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   11.377015] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   11.503694] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   11.503696] cfg80211: failed to load regulatory.db
[   11.588412] usb 3-3: Vendor: Realtek
[   11.588413] usb 3-3: Product: 802.11n WLAN Adapter
[   11.588414] usb 3-3: rtl8192cu_parse_efuse: dumping efuse (0x80 bytes):
[   11.588416] usb 3-3: 00: 29 81 00 74 cd 00 00 00
[   11.588417] usb 3-3: 08: ff 00 da 0b 78 81 01 41
[   11.588418] usb 3-3: 10: 32 00 85 62 9e ad 08 10
[   11.588419] usb 3-3: 18: 76 fa 73 ae 0a 03 52 65
[   11.588420] usb 3-3: 20: 61 6c 74 65 6b 00 16 03
[   11.588421] usb 3-3: 28: 38 30 32 2e 31 31 6e 20
[   11.588422] usb 3-3: 30: 57 4c 41 4e 20 41 64 61
[   11.588423] usb 3-3: 38: 70 74 65 72 00 00 00 00
[   11.588424] usb 3-3: 40: 00 00 00 00 00 00 00 00
[   11.588425] usb 3-3: 48: 00 00 00 00 00 00 00 00
[   11.588426] usb 3-3: 50: 00 00 00 00 00 00 00 00
[   11.588427] usb 3-3: 58: 06 00 28 27 26 2d 2d 2d
[   11.588428] usb 3-3: 60: 25 25 25 2c 2c 2c 00 00
[   11.588429] usb 3-3: 68: 00 00 00 00 44 44 44 00
[   11.588430] usb 3-3: 70: 00 00 00 00 00 02 00 00
[   11.588431] usb 3-3: 78: 10 00 00 00 36 00 00 00
[   11.588433] usb 3-3: RTL8192CU rev A (TSMC) 2T2R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0
[   11.588434] usb 3-3: RTL8192CU MAC: 08:10:76:fa:73:ae
[   11.588435] usb 3-3: rtl8xxxu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[   11.738991] usb 3-3: Firmware revision 80.0 (signature 0x88c1)
[   12.407358] usbcore: registered new interface driver rtl8xxxu
[   13.003911] usbcore: registered new interface driver rtl8192cu
[   13.403480] rtl8xxxu 3-3:1.0 wlx081076fa73ae: renamed from wlan0
[   23.847314] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   23.847489] enp3s0: 0xffffac3c00c81000, 60:a4:4c:59:12:6f, IRQ 26
[   23.939402] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   23.967474] IPv6: ADDRCONF(NETDEV_UP): wlx081076fa73ae: link is not ready
[   23.972555] IPv6: ADDRCONF(NETDEV_UP): wlx081076fa73ae: link is not ready
[   24.157234] IPv6: ADDRCONF(NETDEV_UP): wlx081076fa73ae: link is not ready
[   25.264062] wlx081076fa73ae: authenticate with e4:fb:5d:20:4f:29
[   25.267625] wlx081076fa73ae: send auth to e4:fb:5d:20:4f:29 (try 1/3)
[   25.277249] wlx081076fa73ae: authenticated
[   25.279964] wlx081076fa73ae: associate with e4:fb:5d:20:4f:29 (try 1/3)
[   25.284499] wlx081076fa73ae: RX AssocResp from e4:fb:5d:20:4f:29 (capab=0x411 status=0 aid=1)
[   25.285186] usb 3-3: rtl8xxxu_bss_info_changed: HT supported
[   25.285789] wlx081076fa73ae: associated
[   25.333699] IPv6: ADDRCONF(NETDEV_CHANGE): wlx081076fa73ae: link becomes ready
[   27.900991] show_signal_msg: 31 callbacks suppressed
[   27.900993] gnome-shell[922]: segfault at 20 ip 00007f20b800255d sp 00007ffd510146d0 error 4 in libmutter-2.so.0.0.0[7f20b7f14000+156000]
[   29.147936] gnome-shell[996]: segfault at 20 ip 00007fa6b0f4755d sp 00007ffd18030930 error 4 in libmutter-2.so.0.0.0[7fa6b0e59000+156000]
[   31.131398] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[   31.131513] caller os_map_kernel_space.part.7+0xda/0x120 [nvidia] mapping multiple BARs
[   31.308097] nvidia-modeset: Allocated GPU:0 (GPU-bdd65382-a905-2c84-4da6-3513dd29b98d) @ PCI:0000:01:00.0
[   55.336151] rfkill: input handler disabled
[  125.711039] wlx081076fa73ae: deauthenticating from e4:fb:5d:20:4f:29 by local choice (Reason: 3=DEAUTH_LEAVING)
[  130.819961] IPv6: ADDRCONF(NETDEV_UP): wlx081076fa73ae: link is not ready
[  130.876316] IPv6: ADDRCONF(NETDEV_UP): wlx081076fa73ae: link is not ready
[  131.955718] wlx081076fa73ae: authenticate with e4:fb:5d:20:4f:29
[  131.959264] wlx081076fa73ae: send auth to e4:fb:5d:20:4f:29 (try 1/3)
[  131.964076] wlx081076fa73ae: authenticated
[  131.968771] wlx081076fa73ae: associate with e4:fb:5d:20:4f:29 (try 1/3)
[  131.972786] wlx081076fa73ae: RX AssocResp from e4:fb:5d:20:4f:29 (capab=0x411 status=0 aid=1)
[  131.973504] usb 3-3: rtl8xxxu_bss_info_changed: HT supported
[  131.974107] wlx081076fa73ae: associated
[  131.983070] IPv6: ADDRCONF(NETDEV_CHANGE): wlx081076fa73ae: link becomes ready



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 02 Aralık 2018 - 15:38:11

erden@erden-System-Product-Name:~$ dmesg | tail
[  130.819961] IPv6: ADDRCONF(NETDEV_UP): wlx081076fa73ae: link is not ready
[  130.876316] IPv6: ADDRCONF(NETDEV_UP): wlx081076fa73ae: link is not ready
[  131.955718] wlx081076fa73ae: authenticate with e4:fb:5d:20:4f:29
[  131.959264] wlx081076fa73ae: send auth to e4:fb:5d:20:4f:29 (try 1/3)
[  131.964076] wlx081076fa73ae: authenticated
[  131.968771] wlx081076fa73ae: associate with e4:fb:5d:20:4f:29 (try 1/3)
[  131.972786] wlx081076fa73ae: RX AssocResp from e4:fb:5d:20:4f:29 (capab=0x411 status=0 aid=1)
[  131.973504] usb 3-3: rtl8xxxu_bss_info_changed: HT supported
[  131.974107] wlx081076fa73ae: associated
[  131.983070] IPv6: ADDRCONF(NETDEV_CHANGE): wlx081076fa73ae: link becomes ready



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 02 Aralık 2018 - 15:38:29

Şimdiden Teşekkürler herkese...

speakerXXL

Kablosuz ağ aygıtı RTL8111/8168/8411 değil lsusb çıktısında görüldüğü üzere RTL8192CU çipsetini kullanıyor. Konu başlığını buna göre düzenlerseniz uygun olacaktır.

Bu aygıt için aşağıdaki komutla bir yapılandırma dosyası oluşturup sistemi yeniden başlatmayı deneyebilirsiniz. Bu şekilde aygıt yazılımsal şifreleme kipinde çalışacaktır.

echo "options rtl8192cu swenc=1" | sudo tee /etc/modprobe.d/rtl8192cu.conf

mesute

Alıntı yapılan: speakerXXL - 02 Aralık 2018 - 16:52:51
Kablosuz ağ aygıtı RTL8111/8168/8411 değil lsusb çıktısında görüldüğü üzere RTL8192CU çipsetini kullanıyor. Konu başlığını buna göre düzenlerseniz uygun olacaktır.

Bu aygıt için aşağıdaki komutla bir yapılandırma dosyası oluşturup sistemi yeniden başlatmayı deneyebilirsiniz. Bu şekilde aygıt yazılımsal şifreleme kipinde çalışacaktır.

echo "options rtl8192cu swenc=1" | sudo tee /etc/modprobe.d/rtl8192cu.conf
Maalesef aynı sorun devam ediyor net çok yavaş ve kopma oluyor

speakerXXL

Sistemi yeniden başlattınız mı?

Not: Konu başlığı düzeltilmemiş.

mesute


speakerXXL

Aşağıdaki komutun çıktısına bakalım.

cat /etc/modprobe.d/rtl8192cu.conf

mesute

Alıntı yapılan: speakerXXL - 02 Aralık 2018 - 18:41:07
Aşağıdaki komutun çıktısına bakalım.

cat /etc/modprobe.d/rtl8192cu.conf

erden@erden:~$ cat /etc/modprobe.d/rtl8192cu.conf
cat: /etc/modprobe.d/rtl8192cu.conf: Böyle bir dosya ya da dizin yok

speakerXXL

Yapılandırma dosyası oluşturulmamış. Aşağıdaki komutları sırasıyla uçbirimde çalıştrınız.

sudo touch /etc/modprobe.d/rtl8192cu.conf
gedit admin:///etc/modprobe.d/rtl8192cu.conf


Açılan dosyaya aşağıdaki satırı ekleyip dosyayı kaydedin.

echo "options rtl8192cu swenc=1" | sudo tee /etc/modprobe.d/rtl8192cu.conf

Sistemi yeniden başlatın.