Kablolu ve Kablosuz bağlantı kuramıyorum ubuntu 18.04.1 LTS

Başlatan sancaktar34, 13 Ağustos 2018 - 16:14:30

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

sancaktar34

Merhaba dahili ve harici wifi adaptör + ethernet lan ile bile bağlantı kuramıyorum.
Laptop Casper mb50ia1 6gb ram i7 işlemci mevcut. Daha önce windows 10 vardı direk kaldırıp ubuntuyu kurdum. Ubuntu 18.04.1 LTS
İstenilen çıktıları ekledim.. Yardımcı olabilir misiniz? Daha önce etherneten bir kaç şey deneyip bağlanmayı başardım ancak sonra yine koptu..

liva@liva-ubx:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=18.04
DISTRIB_CODENAME=bionic
DISTRIB_DESCRIPTION="Ubuntu 18.04.1 LTS"


liva@liva-ubx:~$ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.15.0-30-generic root=UUID=26524674-92d0-4268-9200-ba5d3604158b ro quiet splash vt.handoff=1


liva@liva-ubx:~$ uname -a
Linux liva-ubx 4.15.0-30-generic #32-Ubuntu SMP Thu Jul 26 17:42:43 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux


liva@liva-ubx:~$ lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Whistler LE [Radeon HD 6610M/7610M] (rev ff)
02:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] (rev 34)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)


liva@liva-ubx:~$ lsusb
Bus 002 Device 006: ID 0781:557d SanDisk Corp. Cruzer Force (64GB)
Bus 002 Device 005: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter
Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 002 Device 003: ID 214b:7000 
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


liva@liva-ubx:~$ rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
1: phy1: Wireless LAN
Soft blocked: no
Hard blocked: no


liva@liva-ubx:~$ sudo lshw -C network
[sudo] password for liva:
  *-network ETKİSİZLEŞTİRİLDİ
       açıklama: Kablosuz arayüz
       ürün: Centrino Wireless-N 1030 [Rainbow Peak]
       üretici: Intel Corporation
       physical id: 0
       bus info: pci@0000:02:00.0
       mantıksal ad: wlp2s0
       sürüm: 34
       serial: ac:72:89:a9:34:68
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress bus_master cap_list eternet physical wireless
       yapılandırma: broadcast=yes driver=iwlwifi driverversion=4.15.0-30-generic firmware=18.168.6.1 latency=0 link=no multicast=yes wireless=IEEE 802.11
       kaynaklar: irq:28 bellek:f0500000-f0501fff
  *-network UNCLAIMED
       açıklama: Ethernet controller
       ürün: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:04:00.0
       sürüm: 06
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress msix vpd bus_master cap_list
       yapılandırma: latency=0
       kaynaklar: ioport:4000(boyut=256) bellek:f0900000-f0900fff bellek:f0a04000-f0a07fff
  *-network ETKİSİZLEŞTİRİLDİ
       açıklama: Kablosuz arayüz
       physical id: 4
       bus info: usb@2:1.1.2
       mantıksal ad: wlx081078c5e47e
       serial: 08:10:78:c5:e4:7e
       kapasiteler: eternet physical wireless
       yapılandırma: broadcast=yes driver=rtl8192cu driverversion=4.15.0-30-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11


liva@liva-ubx:~$ ifconfig

Command 'ifconfig' not found, but can be installed with:

sudo apt install net-tools


liva@liva-ubx:~$ iwconfig
wlx081078c5e47e  IEEE 802.11  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm   
          Retry short limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:on
         
lo        no wireless extensions.

wlp2s0    IEEE 802.11  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:off


liva@liva-ubx:~$ iwlist scanning
wlx081078c5e47e  Failed to read scan data : Network is down

lo        Interface doesn't support scanning.

wlp2s0    Failed to read scan data : Network is down


liva@liva-ubx:~$ lsmod
Module                  Size  Used by
nls_iso8859_1          16384  1
snd_hda_codec_hdmi     49152  1
snd_hda_codec_realtek    94208  1
snd_hda_codec_generic    73728  1 snd_hda_codec_realtek
intel_rapl             20480  0
x86_pkg_temp_thermal    16384  0
intel_powerclamp       16384  0
coretemp               16384  0
snd_hda_intel          40960  3
kvm_intel             204800  0
rtl8xxxu              122880  0
snd_hda_codec         126976  4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_core           81920  5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hwdep              20480  1 snd_hda_codec
rtl8192cu              73728  0
rtl_usb                20480  1 rtl8192cu
rtl8192c_common        57344  1 rtl8192cu
snd_pcm                98304  4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
kvm                   593920  1 kvm_intel
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
irqbypass              16384  1 kvm
snd_rawmidi            32768  1 snd_seq_midi
crct10dif_pclmul       16384  0
crc32_pclmul           16384  0
rtlwifi                77824  3 rtl_usb,rtl8192c_common,rtl8192cu
arc4                   16384  4
ghash_clmulni_intel    16384  0
iwldvm                229376  0
snd_seq                65536  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
mac80211              778240  5 rtl_usb,rtlwifi,rtl8192cu,iwldvm,rtl8xxxu
pcbc                   16384  0
aesni_intel           188416  0
iwlwifi               282624  1 iwldvm
snd_timer              32768  2 snd_seq,snd_pcm
cfg80211              622592  4 iwlwifi,mac80211,rtlwifi,iwldvm
aes_x86_64             20480  1 aesni_intel
shpchp                 36864  0
snd                    81920  17 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
crypto_simd            16384  1 aesni_intel
soundcore              16384  1 snd
glue_helper            16384  1 aesni_intel
mei_me                 40960  0
cryptd                 24576  3 crypto_simd,ghash_clmulni_intel,aesni_intel
mei                    90112  1 mei_me
intel_cstate           20480  0
intel_rapl_perf        16384  0
joydev                 24576  0
input_leds             16384  0
mac_hid                16384  0
lpc_ich                24576  0
sparse_keymap          16384  0
input_polldev          16384  0
serio_raw              16384  0
sch_fq_codel           20480  1
parport_pc             36864  0
ppdev                  20480  0
lp                     20480  0
parport                49152  3 lp,parport_pc,ppdev
ip_tables              28672  0
x_tables               40960  1 ip_tables
autofs4                40960  2
uas                    24576  0
usb_storage            69632  2 uas
hid_logitech_hidpp     32768  0
hid_logitech_dj        20480  0
usbhid                 49152  0
hid                   118784  4 usbhid,hid_logitech_dj,hid_logitech_hidpp
radeon               1470464  1
i915                 1617920  12
ttm                   106496  1 radeon
i2c_algo_bit           16384  2 radeon,i915
drm_kms_helper        172032  2 radeon,i915
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
psmouse               147456  0
drm                   401408  8 radeon,i915,ttm,drm_kms_helper
ahci                   36864  1
libahci                32768  1 ahci
wmi                    24576  0
video                  45056  1 i915


liva@liva-ubx:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x2d, date = 2018-02-07
[    0.000000] Linux version 4.15.0-30-generic (buildd@lgw01-amd64-060) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #32-Ubuntu SMP Thu Jul 26 17:42:43 UTC 2018 (Ubuntu 4.15.0-30.32-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-30-generic root=UUID=26524674-92d0-4268-9200-ba5d3604158b ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000009ea7bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000009ea7c000-0x000000009ea81fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009ea82000-0x000000009ebdbfff] usable
[    0.000000] BIOS-e820: [mem 0x000000009ebdc000-0x000000009ec0efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009ec0f000-0x000000009ec6dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000009ec6e000-0x000000009eceefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009ecef000-0x000000009ef0efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009ef0f000-0x000000009ef17fff] usable
[    0.000000] BIOS-e820: [mem 0x000000009ef18000-0x000000009ef1efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009ef1f000-0x000000009ef6efff] usable
[    0.000000] BIOS-e820: [mem 0x000000009ef6f000-0x000000009ef9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009ef9f000-0x000000009efe2fff] usable
[    0.000000] BIOS-e820: [mem 0x000000009efe3000-0x000000009effefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009efff000-0x000000009effffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009f000000-0x00000000a79fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001d7dfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Casper MB50IA1/MB50IA1, BIOS 1.03.03.CA 11/04/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1d7e00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DBFFF uncachable
[    0.000000]   DC000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 disabled
[    0.000000]   1 base 100000000 mask F80000000 write-back
[    0.000000]   2 base 180000000 mask FC0000000 write-back
[    0.000000]   3 base 1C0000000 mask FF0000000 write-back
[    0.000000]   4 base 1D0000000 mask FF8000000 write-back
[    0.000000]   5 base 1D7E00000 mask FFFE00000 uncachable
[    0.000000]   6 base 000000000 mask F80000000 write-back
[    0.000000]   7 base 080000000 mask FE0000000 write-back
[    0.000000]   8 base 09F000000 mask FFF000000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000000] total RAM covered: 5998M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 32M num_reg: 8  lose cover RAM: 0G
[    0.000000] e820: update [mem 0x9f000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f6ed0-0x000f6edf] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 96000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x1a1b3f000, 0x1a1b3ffff] PGTABLE
[    0.000000] BRK [0x1a1b40000, 0x1a1b40fff] PGTABLE
[    0.000000] BRK [0x1a1b41000, 0x1a1b41fff] PGTABLE
[    0.000000] BRK [0x1a1b42000, 0x1a1b42fff] PGTABLE
[    0.000000] BRK [0x1a1b43000, 0x1a1b43fff] PGTABLE
[    0.000000] BRK [0x1a1b44000, 0x1a1b44fff] PGTABLE
[    0.000000] BRK [0x1a1b45000, 0x1a1b45fff] PGTABLE
[    0.000000] BRK [0x1a1b46000, 0x1a1b46fff] PGTABLE
[    0.000000] BRK [0x1a1b47000, 0x1a1b47fff] PGTABLE
[    0.000000] BRK [0x1a1b48000, 0x1a1b48fff] PGTABLE
[    0.000000] BRK [0x1a1b49000, 0x1a1b49fff] PGTABLE
[    0.000000] BRK [0x1a1b4a000, 0x1a1b4afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31923000-0x34c88fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6E30 000024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 0x000000009EFF6F33 000074 (v01 CASPER ERA      06040000  LTP 00000000)
[    0.000000] ACPI: FACP 0x000000009EFE5000 0000F4 (v03 INTEL  HURONRVR 06040000 PTEC 00000001)
[    0.000000] ACPI: DSDT 0x000000009EFE6000 007C03 (v02 INTEL  SNB-CPT  06040000 INTL 20060912)
[    0.000000] ACPI: FACS 0x000000009EF9CFC0 000040
[    0.000000] ACPI: FACS 0x000000009EF9CFC0 000040
[    0.000000] ACPI: HPET 0x000000009EFFED32 000038 (v01 INTEL  HURONRVR 06040000 PTEC 00000001)
[    0.000000] ACPI: MCFG 0x000000009EFFED6A 00003C (v01 INTEL  HURONRVR 06040000 PTEC 00000001)
[    0.000000] ACPI: APIC 0x000000009EFFEDA6 0000BC (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 0x000000009EFFEE62 000028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SLIC 0x000000009EFFEE8A 000176 (v01 CASPER ERA      06040000  LTP 00000000)
[    0.000000] ACPI: SSDT 0x000000009EFEF000 000D66 (v01 SgRef  SgTabl   00001000 INTL 20060912)
[    0.000000] ACPI: SSDT 0x000000009EFEE000 000AEB (v01 AmdRef AmdTabl  00001000 INTL 20060912)
[    0.000000] ACPI: SSDT 0x000000009EFE4000 00094E (v01 PmRef  Cpu0Ist  00003000 INTL 20060912)
[    0.000000] ACPI: SSDT 0x000000009EFE3000 000996 (v01 PmRef  CpuPm    00003000 INTL 20060912)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001d7dfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1d7dd4000-0x1d7dfefff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001d7dfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009bfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x000000009ea7bfff]
[    0.000000]   node   0: [mem 0x000000009ea82000-0x000000009ebdbfff]
[    0.000000]   node   0: [mem 0x000000009ec0f000-0x000000009ec6dfff]
[    0.000000]   node   0: [mem 0x000000009ef0f000-0x000000009ef17fff]
[    0.000000]   node   0: [mem 0x000000009ef1f000-0x000000009ef6efff]
[    0.000000]   node   0: [mem 0x000000009ef9f000-0x000000009efe2fff]
[    0.000000]   node   0: [mem 0x000000009efff000-0x000000009effffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001d7dfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001d7dfffff]
[    0.000000] On node 0 totalpages: 1533550
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 155 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10084 pages used for memmap
[    0.000000]   DMA32 zone: 645331 pages, LIFO batch:31
[    0.000000]   Normal zone: 13816 pages used for memmap
[    0.000000]   Normal zone: 884224 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 106 pages
[    0.000000] Reserving Intel graphics memory at 0x000000009fa00000-0x00000000a79fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[    0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9ea7c000-0x9ea81fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9ebdc000-0x9ec0efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9ec6e000-0x9eceefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9ecef000-0x9ef0efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9ef18000-0x9ef1efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9ef6f000-0x9ef9efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9efe3000-0x9effefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9f000000-0xa79fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa7a00000-0xe00f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xa7a00000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1509431
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-30-generic root=UUID=26524674-92d0-4268-9200-ba5d3604158b ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 5889080K/6134200K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2408K init, 2416K bss, 245120K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39093 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 2194.897 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.79 BogoMIPS (lpj=8779588)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.024000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.024000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024000] CPU: Physical Processor ID: 0
[    0.024000] CPU: Processor Core ID: 0
[    0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.024000] mce: CPU supports 9 MCE banks
[    0.024000] CPU0: Thermal monitoring enabled (TM1)
[    0.024000] process: using mwait in idle threads
[    0.024000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.024000] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.024000] Spectre V2 : Mitigation: Full generic retpoline
[    0.024000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.024000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.024000] Speculative Store Bypass: Vulnerable
[    0.024000] Freeing SMP alternatives memory: 36K
[    0.032076] TSC deadline timer enabled
[    0.032079] smpboot: CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.032135] mce: [Hardware Error]: Machine check events logged
[    0.032137] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 5: ae20000000041136
[    0.032140] mce: [Hardware Error]: TSC 0 ADDR a0000000 MISC 3040000086
[    0.032144] mce: [Hardware Error]: PROCESSOR 0:206a7 TIME 1534164106 SOCKET 0 APIC 0 microcode 2d
[    0.032146] mce: [Hardware Error]: Machine check events logged
[    0.032148] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 6: ae20000000041136
[    0.032149] mce: [Hardware Error]: TSC 0 ADDR a0000040 MISC 3040000086
[    0.032153] mce: [Hardware Error]: PROCESSOR 0:206a7 TIME 1534164106 SOCKET 0 APIC 0 microcode 2d
[    0.032155] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 7: ae20000000041136
[    0.032156] mce: [Hardware Error]: TSC 0 ADDR a0000080 MISC 7040000086
[    0.032160] mce: [Hardware Error]: PROCESSOR 0:206a7 TIME 1534164106 SOCKET 0 APIC 0 microcode 2d
[    0.032202] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.032226] ... version:                3
[    0.032227] ... bit width:              48
[    0.032227] ... generic registers:      4
[    0.032228] ... value mask:             0000ffffffffffff
[    0.032229] ... max period:             00007fffffffffff
[    0.032230] ... fixed-purpose events:   3
[    0.032230] ... event mask:             000000070000000f
[    0.032270] Hierarchical SRCU implementation.
[    0.033490] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.033507] smp: Bringing up secondary CPUs ...
[    0.033594] x86: Booting SMP configuration:
[    0.033595] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.050477] smp: Brought up 1 node, 8 CPUs
[    0.050477] smpboot: Max logical packages: 1
[    0.050477] smpboot: Total of 8 processors activated (35118.35 BogoMIPS)
[    0.052372] devtmpfs: initialized
[    0.052372] x86/mm: Memory block size: 128MB
[    0.052667] evm: security.selinux
[    0.052668] evm: security.SMACK64
[    0.052668] evm: security.SMACK64EXEC
[    0.052669] evm: security.SMACK64TRANSMUTE
[    0.052670] evm: security.SMACK64MMAP
[    0.052670] evm: security.apparmor
[    0.052671] evm: security.ima
[    0.052671] evm: security.capability
[    0.052688] PM: Registering ACPI NVS region [mem 0x9ec6e000-0x9eceefff] (528384 bytes)
[    0.052688] PM: Registering ACPI NVS region [mem 0x9ef6f000-0x9ef9efff] (196608 bytes)
[    0.052688] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.052688] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.052688] pinctrl core: initialized pinctrl subsystem
[    0.052688] RTC time: 12:41:46, date: 08/13/18
[    0.052688] NET: Registered protocol family 16
[    0.052688] audit: initializing netlink subsys (disabled)
[    0.052688] audit: type=2000 audit(1534164106.052:1): state=initialized audit_enabled=0 res=1
[    0.052688] cpuidle: using governor ladder
[    0.052688] cpuidle: using governor menu
[    0.052688] Simple Boot Flag at 0x36 set to 0x1
[    0.052688] ACPI: bus type PCI registered
[    0.052688] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.052688] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.052688] PCI: not using MMCONFIG
[    0.052688] PCI: Using configuration type 1 for base access
[    0.052688] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.053571] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.053571] ACPI: Added _OSI(Module Device)
[    0.053571] ACPI: Added _OSI(Processor Device)
[    0.053571] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.053571] ACPI: Added _OSI(Processor Aggregator Device)
[    0.053571] ACPI: Added _OSI(Linux-Dell-Video)
[    0.056220] ACPI: Executed 1 blocks of module-level executable AML code
[    0.063194] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.063313] ACPI Error: No handler for Region [ECXP] (        (ptrval)) [EmbeddedControl] (20170831/evregion-166)
[    0.063320] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20170831/exfldio-299)
[    0.063328] No Local Variables are initialized for Method [_STA]
[    0.063329] No Arguments are initialized for method [_STA]
[    0.063331] ACPI Error: Method parse/execution failed \_SB.PCI0.PEG0.PEGP._STA, AE_NOT_EXIST (20170831/psparse-550)
[    0.063339] ACPI Error: Method execution failed \_SB.PCI0.PEG0.PEGP._STA, AE_NOT_EXIST (20170831/uteval-103)
[    0.063915] ACPI: Dynamic OEM Table Load:
[    0.063923] ACPI: SSDT 0xFFFF93358FEFE800 00067C (v01 PmRef  Cpu0Cst  00003001 INTL 20060912)
[    0.064528] ACPI: Dynamic OEM Table Load:
[    0.064533] ACPI: SSDT 0xFFFF93358FF5F800 000303 (v01 PmRef  ApIst    00003000 INTL 20060912)
[    0.064960] ACPI: Dynamic OEM Table Load:
[    0.064965] ACPI: SSDT 0xFFFF93358FF88800 000119 (v01 PmRef  ApCst    00003000 INTL 20060912)
[    0.067355] ACPI: EC: EC started
[    0.067355] ACPI: EC: interrupt blocked
[    0.192146] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.192149] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.192151] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.192151] ACPI: Interpreter enabled
[    0.192178] ACPI: (supports S0 S1 S3 S4 S5)
[    0.192179] ACPI: Using IOAPIC for interrupt routing
[    0.192213] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.192807] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.192825] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.193076] ACPI: GPE 0x01 active on init
[    0.193128] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.199342] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.199349] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.199413] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.200140] PCI host bridge to bus 0000:00
[    0.200143] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.200145] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.200146] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.200148] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.200150] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.200151] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.200153] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.200154] pci_bus 0000:00: root bus resource [mem 0xa7a00000-0xfeafffff window]
[    0.200156] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.200166] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.200280] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.200321] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.200426] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.200439] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.200445] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.200450] pci 0000:00:02.0: reg 0x20: [io  0x1800-0x183f]
[    0.200633] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.200672] pci 0000:00:16.0: reg 0x10: [mem 0xf0804000-0xf080400f 64bit]
[    0.200788] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.200905] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.200939] pci 0000:00:1a.0: reg 0x10: [mem 0xf0807000-0xf08073ff]
[    0.201071] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.201181] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.201219] pci 0000:00:1b.0: reg 0x10: [mem 0xf0800000-0xf0803fff 64bit]
[    0.201352] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.201465] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.201607] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.201721] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.201860] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.201987] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.202021] pci 0000:00:1d.0: reg 0x10: [mem 0xf0808000-0xf08083ff]
[    0.202153] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.202257] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.202508] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.202543] pci 0000:00:1f.2: reg 0x10: [io  0x18a0-0x18a7]
[    0.202557] pci 0000:00:1f.2: reg 0x14: [io  0x1874-0x1877]
[    0.202571] pci 0000:00:1f.2: reg 0x18: [io  0x1878-0x187f]
[    0.202584] pci 0000:00:1f.2: reg 0x1c: [io  0x1870-0x1873]
[    0.202598] pci 0000:00:1f.2: reg 0x20: [io  0x1880-0x189f]
[    0.202611] pci 0000:00:1f.2: reg 0x24: [mem 0xf0809000-0xf08097ff]
[    0.202691] pci 0000:00:1f.2: PME# supported from D3hot
[    0.202790] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.202823] pci 0000:00:1f.3: reg 0x10: [mem 0xf080a000-0xf080a0ff 64bit]
[    0.202861] pci 0000:00:1f.3: reg 0x20: [io  0x18c0-0x18df]
[    0.203052] pci 0000:01:00.0: [1002:6742] type 00 class 0x030000
[    0.203084] pci 0000:01:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.203098] pci 0000:01:00.0: reg 0x18: [mem 0xafee0000-0xafefffff 64bit]
[    0.203107] pci 0000:01:00.0: reg 0x20: [io  0x2000-0x20ff]
[    0.203123] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.203133] pci 0000:01:00.0: enabling Extended Tags
[    0.203195] pci 0000:01:00.0: supports D1 D2
[    0.216037] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.216045] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.216051] pci 0000:00:01.0:   bridge window [mem 0xafe00000-0xafefffff]
[    0.216060] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.216211] pci 0000:02:00.0: [8086:008a] type 00 class 0x028000
[    0.216291] pci 0000:02:00.0: reg 0x10: [mem 0xf0500000-0xf0501fff 64bit]
[    0.216567] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.232055] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.232064] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.232073] pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.232087] pci 0000:00:1c.0:   bridge window [mem 0xf0c00000-0xf0dfffff 64bit pref]
[    0.232266] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.232401] pci 0000:04:00.0: reg 0x10: [io  0x4000-0x40ff]
[    0.232531] pci 0000:04:00.0: reg 0x18: [mem 0xf0900000-0xf0900fff 64bit pref]
[    0.232613] pci 0000:04:00.0: reg 0x20: [mem 0xf0a04000-0xf0a07fff 64bit pref]
[    0.233056] pci 0000:04:00.0: supports D1 D2
[    0.233058] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.248086] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[    0.248095] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.248104] pci 0000:00:1c.1:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.248118] pci 0000:00:1c.1:   bridge window [mem 0xf0900000-0xf0bfffff 64bit pref]
[    0.249656] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.249754] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.249849] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[    0.249943] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.250035] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.250130] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.250223] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.250317] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.252003] ACPI: EC: interrupt unblocked
[    0.252003] ACPI: EC: event unblocked
[    0.252003] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.252003] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.252003] SCSI subsystem initialized
[    0.252015] libata version 3.00 loaded.
[    0.252025] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.252025] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.252025] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.252025] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.252025] pci 0000:00:02.0: vgaarb: no bridge control possible
[    0.252025] vgaarb: loaded
[    0.252040] ACPI: bus type USB registered
[    0.252055] usbcore: registered new interface driver usbfs
[    0.252063] usbcore: registered new interface driver hub
[    0.252084] usbcore: registered new device driver usb
[    0.252120] EDAC MC: Ver: 3.0.0
[    0.252120] PCI: Using ACPI for IRQ routing
[    0.265064] PCI: pci_cache_line_size set to 64 bytes
[    0.265134] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[    0.265136] e820: reserve RAM buffer [mem 0x9ea7c000-0x9fffffff]
[    0.265138] e820: reserve RAM buffer [mem 0x9ebdc000-0x9fffffff]
[    0.265140] e820: reserve RAM buffer [mem 0x9ec6e000-0x9fffffff]
[    0.265142] e820: reserve RAM buffer [mem 0x9ef18000-0x9fffffff]
[    0.265143] e820: reserve RAM buffer [mem 0x9ef6f000-0x9fffffff]
[    0.265145] e820: reserve RAM buffer [mem 0x9efe3000-0x9fffffff]
[    0.265146] e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
[    0.265147] e820: reserve RAM buffer [mem 0x1d7e00000-0x1d7ffffff]
[    0.265252] NetLabel: Initializing
[    0.265253] NetLabel:  domain hash size = 128
[    0.265254] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.265271] NetLabel:  unlabeled traffic allowed by default
[    0.268056] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.268063] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.270088] clocksource: Switched to clocksource hpet
[    0.280390] VFS: Disk quotas dquot_6.6.0
[    0.280411] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.280522] AppArmor: AppArmor Filesystem Enabled
[    0.280554] pnp: PnP ACPI init
[    0.281091] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.281093] system 00:00: [io  0x0700-0x070f] has been reserved
[    0.281095] system 00:00: [io  0xffff] has been reserved
[    0.281097] system 00:00: [io  0xffff] has been reserved
[    0.281099] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.281101] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.281103] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.281105] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.281112] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.281147] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.281218] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.281224] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.281290] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.281352] pnp 00:04: Plug and Play ACPI device, IDs SYN0e0e SYN0e00 SYN0002 PNP0f13 (active)
[    0.281561] pnp 00:05: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    0.281588] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.281590] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.281592] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.281594] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.281596] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.281598] system 00:05: [mem 0xfeaff000-0xfeafffff] has been reserved
[    0.281600] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.281602] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.281604] system 00:05: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.281606] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.281608] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.281610] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.281615] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.282808] pnp: PnP ACPI: found 6 devices
[    0.289503] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.289541] pci 0000:01:00.0: BAR 6: assigned [mem 0xafe00000-0xafe1ffff pref]
[    0.289544] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.289546] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.289549] pci 0000:00:01.0:   bridge window [mem 0xafe00000-0xafefffff]
[    0.289552] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.289555] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.289559] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.289565] pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.289570] pci 0000:00:1c.0:   bridge window [mem 0xf0c00000-0xf0dfffff 64bit pref]
[    0.289579] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[    0.289582] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.289589] pci 0000:00:1c.1:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.289594] pci 0000:00:1c.1:   bridge window [mem 0xf0900000-0xf0bfffff 64bit pref]
[    0.289604] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.289606] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.289607] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.289609] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.289611] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.289612] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.289614] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window]
[    0.289616] pci_bus 0000:00: resource 11 [mem 0xa7a00000-0xfeafffff window]
[    0.289618] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.289619] pci_bus 0000:01: resource 1 [mem 0xafe00000-0xafefffff]
[    0.289621] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.289622] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.289624] pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.289626] pci_bus 0000:02: resource 2 [mem 0xf0c00000-0xf0dfffff 64bit pref]
[    0.289627] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.289629] pci_bus 0000:04: resource 1 [mem 0xf0400000-0xf04fffff]
[    0.289631] pci_bus 0000:04: resource 2 [mem 0xf0900000-0xf0bfffff 64bit pref]
[    0.289747] NET: Registered protocol family 2
[    0.289945] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.290084] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.290212] TCP: Hash tables configured (established 65536 bind 65536)
[    0.290251] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.290278] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.290340] NET: Registered protocol family 1
[    0.290355] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.290802] PCI: CLS 64 bytes, default 64
[    0.290843] Unpacking initramfs...
[    1.184237] Freeing initrd memory: 52632K
[    1.184293] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.184296] software IO TLB [mem 0x9aa7c000-0x9ea7c000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    1.184687] Scanning for low memory corruption every 60 seconds
[    1.185474] Initialise system trusted keyrings
[    1.185486] Key type blacklist registered
[    1.185526] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    1.186785] zbud: loaded
[    1.187317] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.187465] fuse init (API version 7.26)
[    1.189269] Key type asymmetric registered
[    1.189270] Asymmetric key parser 'x509' registered
[    1.189301] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.189343] io scheduler noop registered
[    1.189344] io scheduler deadline registered
[    1.189388] io scheduler cfq registered (default)
[    1.190139] efifb: probing for efifb
[    1.190146] efifb: framebuffer at 0xa0000, using 64k, total 64k
[    1.190147] efifb: mode is 640x480x1, linelength=80, pages=1
[    1.190148] efifb: scrolling: redraw
[    1.190150] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.190243] Console: switching to colour frame buffer device 80x30
[    1.190255] fb0: EFI VGA frame buffer device
[    1.190264] intel_idle: MWAIT substates: 0x21120
[    1.190265] intel_idle: v0.4.1 model 0x2A
[    1.190603] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.191134] ACPI: AC Adapter [AC0] (on-line)
[    1.191196] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.191205] ACPI: Power Button [PWRB]
[    1.191241] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.191250] ACPI: Lid Switch [LID]
[    1.191282] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.191289] ACPI: Sleep Button [SLPB]
[    1.191326] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.191356] ACPI: Power Button [PWRF]
[    1.192676] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.193203] thermal LNXTHERM:00: registered as thermal_zone0
[    1.193204] ACPI: Thermal Zone [THRM] (61 C)
[    1.193376] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.199664] Linux agpgart interface v0.103
[    1.202248] loop: module loaded
[    1.202426] libphy: Fixed MDIO Bus: probed
[    1.202428] tun: Universal TUN/TAP device driver, 1.6
[    1.202463] PPP generic driver version 2.4.2
[    1.202509] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.202511] ehci-pci: EHCI PCI platform driver
[    1.202643] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.202650] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.202665] ehci-pci 0000:00:1a.0: debug port 2
[    1.203761] ACPI: Battery Slot [BAT0] (battery present)
[    1.206571] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.206587] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0807000
[    1.220077] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.220174] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.220176] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.220178] usb usb1: Product: EHCI Host Controller
[    1.220180] usb usb1: Manufacturer: Linux 4.15.0-30-generic ehci_hcd
[    1.220181] usb usb1: SerialNumber: 0000:00:1a.0
[    1.220383] hub 1-0:1.0: USB hub found
[    1.220392] hub 1-0:1.0: 3 ports detected
[    1.220656] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.220661] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.220676] ehci-pci 0000:00:1d.0: debug port 2
[    1.224575] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.224587] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0808000
[    1.240085] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.240169] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.240171] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.240173] usb usb2: Product: EHCI Host Controller
[    1.240175] usb usb2: Manufacturer: Linux 4.15.0-30-generic ehci_hcd
[    1.240176] usb usb2: SerialNumber: 0000:00:1d.0
[    1.240407] hub 2-0:1.0: USB hub found
[    1.240414] hub 2-0:1.0: 3 ports detected
[    1.240556] ehci-platform: EHCI generic platform driver
[    1.240566] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.240570] ohci-pci: OHCI PCI platform driver
[    1.240578] ohci-platform: OHCI generic platform driver
[    1.240584] uhci_hcd: USB Universal Host Controller Interface driver
[    1.240639] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.243455] i8042: Detected active multiplexing controller, rev 1.1
[    1.244615] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.244620] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.244648] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.244671] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.244693] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.244987] mousedev: PS/2 mouse device common for all mice
[    1.245741] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.245776] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.245789] i2c /dev entries driver
[    1.245837] device-mapper: uevent: version 1.0.3
[    1.245908] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.245913] intel_pstate: Intel P-state driver initializing
[    1.246646] ledtrig-cpu: registered to indicate activity on CPUs
[    1.247163] NET: Registered protocol family 10
[    1.251472] Segment Routing with IPv6
[    1.251489] NET: Registered protocol family 17
[    1.251560] Key type dns_resolver registered
[    1.252051] RAS: Correctable Errors collector initialized.
[    1.252096] microcode: sig=0x206a7, pf=0x10, revision=0x2d
[    1.252295] microcode: Microcode Update Driver: v2.2.
[    1.252306] sched_clock: Marking stable (1252287736, 0)->(1251709075, 578661)
[    1.252594] registered taskstats version 1
[    1.252602] Loading compiled-in X.509 certificates
[    1.255100] Loaded X.509 cert 'Build time autogenerated kernel key: 83a24b0453c1c7015e385f44153c9d4e483baefd'
[    1.255118] zswap: loaded using pool lzo/zbud
[    1.258219] Key type big_key registered
[    1.258223] Key type trusted registered
[    1.259711] Key type encrypted registered
[    1.259713] AppArmor: AppArmor sha1 policy hashing enabled
[    1.259716] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.259736] evm: HMAC attrs: 0x1
[    1.260081]   Magic number: 14:393:683
[    1.260196] rtc_cmos 00:01: setting system clock to 2018-08-13 12:41:47 UTC (1534164107)
[    1.260319] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.260320] EDD information not available.
[    1.263151] Freeing unused kernel memory: 2408K
[    1.286925] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.296079] Write protecting the kernel read-only data: 20480k
[    1.296725] Freeing unused kernel memory: 2008K
[    1.300790] Freeing unused kernel memory: 1904K
[    1.306767] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.306768] x86/mm: Checking user space page tables
[    1.312808] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.417296] ahci 0000:00:1f.2: version 3.0
[    1.417566] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.427679] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xb impl SATA mode
[    1.427682] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[    1.448616] scsi host0: ahci
[    1.448767] scsi host1: ahci
[    1.448869] scsi host2: ahci
[    1.448962] scsi host3: ahci
[    1.449081] scsi host4: ahci
[    1.449174] scsi host5: ahci
[    1.449210] ata1: SATA max UDMA/133 abar m2048@0xf0809000 port 0xf0809100 irq 24
[    1.449212] ata2: SATA max UDMA/133 abar m2048@0xf0809000 port 0xf0809180 irq 24
[    1.449213] ata3: DUMMY
[    1.449216] ata4: SATA max UDMA/133 abar m2048@0xf0809000 port 0xf0809280 irq 24
[    1.449216] ata5: DUMMY
[    1.449217] ata6: DUMMY
[    1.457979] [drm] radeon kernel modesetting enabled.
[    1.457997] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[    1.458102] ATPX version 1, functions 0x00000033
[    1.458200] checking generic (a0000 10000) vs hw (b0000000 10000000)
[    1.458244] radeon 0000:01:00.0: enabling device (0104 -> 0107)
[    1.458416] [drm] initializing kernel modesetting (TURKS 0x1002:0x6742 0x1019:0x2393 0x00).
[    1.458694] [drm] Memory usable by graphics device = 2048M
[    1.458696] checking generic (a0000 10000) vs hw (d0000000 10000000)
[    1.458697] fb: switching to inteldrmfb from EFI VGA
[    1.458716] Console: switching to colour dummy device 80x25
[    1.458811] [drm] Replacing VGA console driver
[    1.494079] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.494080] [drm] Driver supports precise vblank timestamp query.
[    1.509755] vga_switcheroo: enabled
[    1.546271] ATOM BIOS: ECS
[    1.546469] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    1.546471] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    1.546475] [drm] Detected VRAM RAM=1024M, BAR=256M
[    1.546476] [drm] RAM width 128bits DDR
[    1.546550] [TTM] Zone  kernel: Available graphics memory: 2974034 kiB
[    1.546551] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    1.546551] [TTM] Initializing pool allocator
[    1.546557] [TTM] Initializing DMA pool allocator
[    1.546576] [drm] radeon: 1024M of VRAM memory ready
[    1.546576] [drm] radeon: 1024M of GTT memory ready.
[    1.546582] [drm] Loading TURKS Microcode
[    1.546661] [drm] Internal thermal controller without fan control
[    1.546749] radeon 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[    1.546753] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    1.551105] [drm] radeon: dpm initialized
[    1.551168] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.551693] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    1.556041] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.556292] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[    1.556402] radeon 0000:01:00.0: WB enabled
[    1.556405] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x        (ptrval)
[    1.556406] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x        (ptrval)
[    1.557183] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x        (ptrval)
[    1.557185] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.557185] [drm] Driver supports precise vblank timestamp query.
[    1.557187] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    1.557234] radeon 0000:01:00.0: radeon: using MSI.
[    1.557286] [drm] radeon: irq initialized.
[    1.573793] [drm] ring test on 0 succeeded in 2 usecs
[    1.573806] [drm] ring test on 3 succeeded in 9 usecs
[    1.576035] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.652034] random: fast init done
[    1.712403] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.712405] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.712558] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.712569] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.712595] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.712599] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.712607] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.712612] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.712689] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.712694] hub 1-1:1.0: USB hub found
[    1.712698] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.712711] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.712719] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.712777] hub 1-1:1.0: 6 ports detected
[    1.732473] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.732475] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.732752] hub 2-1:1.0: USB hub found
[    1.732931] hub 2-1:1.0: 6 ports detected
[    1.749523] [drm] ring test on 5 succeeded in 2 usecs
[    1.749532] [drm] UVD initialized successfully.
[    1.749852] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.750006] [drm] ib test on ring 3 succeeded in 0 usecs
[    1.762405] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.764407] ata1.00: ATA-8: ST9500325AS, 0003BSM1, max UDMA/133
[    1.764409] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.766814] ata1.00: configured for UDMA/133
[    1.767070] scsi 0:0:0:0: Direct-Access     ATA      ST9500325AS      BSM1 PQ: 0 ANSI: 5
[    1.767375] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.767548] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.767571] sd 0:0:0:0: [sda] Write Protect is off
[    1.767573] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.767682] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.788355]  sda: sda1
[    1.789132] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.020100] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[    2.083053] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.086942] ata2.00: ATAPI: TSSTcorp CDDVDW SN-208BB, SB03, max UDMA/100
[    2.093713] ata2.00: configured for UDMA/100
[    2.107042] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208BB  SB03 PQ: 0 ANSI: 5
[    2.129309] usb 2-1.1: New USB device found, idVendor=214b, idProduct=7000
[    2.129311] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.129312] usb 2-1.1: Product: USB2.0 HUB
[    2.129636] hub 2-1.1:1.0: USB hub found
[    2.129865] hub 2-1.1:1.0: 4 ports detected
[    2.183944] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.183949] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.184213] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.184293] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.196934] psmouse serio4: synaptics: queried max coordinates: x [..5692], y [..4680]
[    2.204128] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[    2.204152] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns
[    2.258724] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762
[    2.299386] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[    2.416122] usb 2-1.1.1: new full-speed USB device number 4 using ehci-pci
[    2.428310] [drm] ib test on ring 5 succeeded
[    2.434889] [drm] Radeon Display Connectors
[    2.446318] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[    2.446721] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 1
[    2.447418] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    2.448233] ACPI Warning: \_SB.PCI0.PEG0.VGA.LCD._BQC: Return type mismatch - found Reference, expected Integer (20170831/nspredef-290)
[    2.450740] acpi device:2d: registered as cooling_device8
[    2.450785] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input13
[    2.450844] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    2.451436] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.451790] ACPI Warning: \_SB.PCI0.GFX0.DD02._BQC: Return type mismatch - found Reference, expected Integer (20170831/nspredef-290)
[    2.454382] acpi device:3a: registered as cooling_device9
[    2.454460] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input14
[    2.499022] ata4: SATA link down (SStatus 0 SControl 300)
[    2.528516] usb 2-1.1.1: New USB device found, idVendor=046d, idProduct=c52b
[    2.528518] usb 2-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.528519] usb 2-1.1.1: Product: USB Receiver
[    2.528521] usb 2-1.1.1: Manufacturer: Logitech
[    2.533668] hidraw: raw HID events driver (C) Jiri Kosina
[    2.539967] usbcore: registered new interface driver usbhid
[    2.539968] usbhid: USB HID core driver
[    2.542981] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1.1/input2
[    2.612066] usb 2-1.1.2: new high-speed USB device number 5 using ehci-pci
[    2.615596] fbcon: inteldrmfb (fb0) is primary device
[    2.615641] Console: switching to colour frame buffer device 128x48
[    2.615656] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.678204] input: Logitech M325 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.2/0003:046D:C52B.0003/0003:046D:400A.0004/input/input15
[    2.678558] logitech-hidpp-device 0003:046D:400A.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:1d.0-1.1.1:1
[    2.680145] logitech-hidpp-device 0003:046D:402D.0006: hidraw2: USB HID v1.11 Keyboard [Logitech M560] on usb-0000:00:1d.0-1.1.1:3
[    2.686261] input: Logitech K330 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.2/0003:046D:C52B.0003/0003:046D:4016.0005/input/input16
[    2.686514] logitech-hidpp-device 0003:046D:4016.0005: input,hidraw3: USB HID v1.11 Keyboard [Logitech K330] on usb-0000:00:1d.0-1.1.1:2
[    2.723317] usb 2-1.1.2: New USB device found, idVendor=0bda, idProduct=8178
[    2.723319] usb 2-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.723320] usb 2-1.1.2: Product: 802.11n WLAN Adapter
[    2.723321] usb 2-1.1.2: Manufacturer: Realtek
[    2.723322] usb 2-1.1.2: SerialNumber: 00e04c000001
[    2.804067] usb 2-1.1.4: new high-speed USB device number 6 using ehci-pci
[    2.914252] usb 2-1.1.4: New USB device found, idVendor=0781, idProduct=557d
[    2.914259] usb 2-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.914264] usb 2-1.1.4: Product: Cruzer Force
[    2.914269] usb 2-1.1.4: Manufacturer: SanDisk
[    2.914273] usb 2-1.1.4: SerialNumber: 4C530001211031111332
[    2.918090] usb-storage 2-1.1.4:1.0: USB Mass Storage device detected
[    2.918327] scsi host6: usb-storage 2-1.1.4:1.0
[    2.918415] usbcore: registered new interface driver usb-storage
[    2.919751] usbcore: registered new interface driver uas
[    3.228342] clocksource: Switched to clocksource tsc
[    3.240478] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.933244] scsi 6:0:0:0: Direct-Access     SanDisk  Cruzer Force     1.00 PQ: 0 ANSI: 6
[    3.933639] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    3.934318] sd 6:0:0:0: [sdb] 30595072 512-byte logical blocks: (15.7 GB/14.6 GiB)
[    3.935460] sd 6:0:0:0: [sdb] Write Protect is off
[    3.935462] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    3.936586] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    3.942467]  sdb: sdb1 sdb2
[    3.946209] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    5.124036] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.144362] random: crng init done
[    5.304353] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.324244] systemd[1]: Detected architecture x86-64.
[    5.339739] systemd[1]: Set hostname to <liva-ubx>.
[    7.228342] systemd[1]: Reached target Remote File Systems.
[    7.228425] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.228580] systemd[1]: Created slice System Slice.
[    7.228630] systemd[1]: Listening on udev Kernel Socket.
[    7.228686] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.228726] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.228769] systemd[1]: Listening on fsck to fsckd communication Socket.
[    7.819091] lp: driver loaded but no devices found
[    7.831190] ppdev: user-space parallel port driver
[    8.360419] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    8.988502] systemd-journald[306]: Received request to flush runtime journal from PID 1
[    9.285798] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k FS
[   20.086245] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[   20.086252] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   20.086255] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   20.086259] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[   20.086263] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   20.086264] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   20.086267] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[   20.086271] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   20.086272] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   20.086275] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[   20.086279] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   20.086279] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   20.243257] asus_wmi: Asus Management GUID not found
[   20.576894] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   20.576895] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   20.576896] RAPL PMU: hw unit of domain package 2^-16 Joules
[   20.576897] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   21.136556] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[   21.142865] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[   21.142961] radeon 0000:01:00.0: WB enabled
[   21.142964] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x000000001211362f
[   21.142966] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0000000061ac8d09
[   21.143713] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x00000000a6d68698
[   21.160060] [drm] ring test on 0 succeeded in 1 usecs
[   21.160075] [drm] ring test on 3 succeeded in 9 usecs
[   21.335799] [drm] ring test on 5 succeeded in 2 usecs
[   21.335809] [drm] UVD initialized successfully.
[   21.335965] [drm] ib test on ring 0 succeeded in 0 usecs
[   21.336141] [drm] ib test on ring 3 succeeded in 0 usecs
[   21.704962] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   22.012136] [drm] ib test on ring 5 succeeded
[   22.261900] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   22.264090] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   22.313629] Intel(R) Wireless WiFi driver for Linux
[   22.313630] Copyright(c) 2003- 2015 Intel Corporation
[   22.313787] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   22.354311] AVX version of gcm_enc/dec engaged.
[   22.354312] AES CTR mode by8 optimization enabled
[   22.810982] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   22.854258] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   22.854260] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   22.854262] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   22.854263] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[   22.866754] iwlwifi 0000:02:00.0: reporting RF_KILL (radio disabled)
[   22.866774] iwlwifi 0000:02:00.0: RF_KILL bit toggled to disable radio.
[   23.172356] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   23.173769] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[   23.731402] rtl8192cu: Chip version 0x11
[   23.795986] audit: type=1400 audit(1534164130.028:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=573 comm="apparmor_parser"
[   23.808378] audit: type=1400 audit(1534164130.044:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=569 comm="apparmor_parser"
[   23.808382] audit: type=1400 audit(1534164130.044:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=569 comm="apparmor_parser"
[   23.808386] audit: type=1400 audit(1534164130.044:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=569 comm="apparmor_parser"
[   23.808612] audit: type=1400 audit(1534164130.044:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=566 comm="apparmor_parser"
[   23.808616] audit: type=1400 audit(1534164130.044:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=566 comm="apparmor_parser"
[   23.808619] audit: type=1400 audit(1534164130.044:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=566 comm="apparmor_parser"
[   23.808626] audit: type=1400 audit(1534164130.044:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=566 comm="apparmor_parser"
[   23.810277] rtl8192cu: Board Type 0
[   23.810530] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[   23.810570] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[   23.810822] ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
[   23.811086] usbcore: registered new interface driver rtl8192cu
[   23.825724] audit: type=1400 audit(1534164130.060:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=570 comm="apparmor_parser"
[   23.832298] audit: type=1400 audit(1534164130.068:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=571 comm="apparmor_parser"
[   23.905574] usbcore: registered new interface driver rtl8xxxu
[   23.908174] rtl8192cu 2-1.1.2:1.0 wlx081078c5e47e: renamed from wlan0
[   23.935903] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   24.232381] intel_rapl: Found RAPL domain package
[   24.232383] intel_rapl: Found RAPL domain core
[   24.232384] intel_rapl: Found RAPL domain uncore
[   24.304307] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   24.304309] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   24.304311] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   24.304312] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   24.304313] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   24.304315] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   24.304317] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   24.517579] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   24.517659] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   24.517730] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   28.872405] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[   28.878160] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[   28.878255] radeon 0000:01:00.0: WB enabled
[   28.878258] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x000000001211362f
[   28.878259] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0000000061ac8d09
[   28.879013] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x00000000a6d68698
[   28.895336] [drm] ring test on 0 succeeded in 2 usecs
[   28.895351] [drm] ring test on 3 succeeded in 9 usecs
[   29.071144] [drm] ring test on 5 succeeded in 2 usecs
[   29.071154] [drm] UVD initialized successfully.
[   29.071321] [drm] ib test on ring 0 succeeded in 0 usecs
[   29.071479] [drm] ib test on ring 3 succeeded in 0 usecs
[   29.724310] [drm] ib test on ring 5 succeeded
[   35.487906] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   35.490460] IPv6: ADDRCONF(NETDEV_UP): wlx081078c5e47e: link is not ready
[   38.409845] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[   38.416072] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[   38.416172] radeon 0000:01:00.0: WB enabled
[   38.416175] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x000000001211362f
[   38.416176] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0000000061ac8d09
[   38.416930] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x00000000a6d68698
[   38.433251] [drm] ring test on 0 succeeded in 2 usecs
[   38.433264] [drm] ring test on 3 succeeded in 9 usecs
[   38.608968] [drm] ring test on 5 succeeded in 2 usecs
[   38.608977] [drm] UVD initialized successfully.
[   38.609136] [drm] ib test on ring 0 succeeded in 0 usecs
[   38.609280] [drm] ib test on ring 3 succeeded in 0 usecs
[   39.260319] [drm] ib test on ring 5 succeeded
[   56.036672] rfkill: input handler disabled
[   58.859306] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  234.926481] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  234.928454] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  234.934534] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  234.950280] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  234.958531] logitech-hidpp-device 0003:046D:402D.0006: HID++ 2.0 device connected.
[  234.966326] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  234.982322] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  234.996331] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  235.012469] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  235.028496] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  235.044327] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  235.060323] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  235.074531] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  235.090430] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  235.098655] input: Logitech Wireless Mouse M560 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.2/0003:046D:C52B.0003/0003:046D:402D.0006/input/input20
[  394.123361] logitech-hidpp-device 0003:046D:4016.0005: HID++ 2.0 device connected.


liva@liva-ubx:~$ dmesg | tail
[  234.982322] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  234.996331] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  235.012469] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  235.028496] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  235.044327] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  235.060323] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  235.074531] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  235.090430] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[  235.098655] input: Logitech Wireless Mouse M560 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.2/0003:046D:C52B.0003/0003:046D:402D.0006/input/input20
[  394.123361] logitech-hidpp-device 0003:046D:4016.0005: HID++ 2.0 device connected.


.py

Wifi ağlarını görebiliyormusunuz?

sudo service network-manager restart
sudo /etc/init.d/networking restart
sudo systemctl restart networking


sancaktar34

#2
Alıntı yapılan: .py - 13 Ağustos 2018 - 16:27:26
Wifi ağlarını görebiliyormusunuz?

sudo service network-manager restart
sudo /etc/init.d/networking restart
sudo systemctl restart networking
sudo /etc/init.d/networking restart
bu komut bulunamadı dedi diğerlerini uyguladım hayır kablosuz ağ bağdaştırıcılarından ikiside açılmıyor zaten onu geçtim landan ethernettende bağlanamıyorum..


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 13 Ağustos 2018 - 17:28:49

Şu an yeni bir kurulum yapıyorum çok karıştırmıştım ilk kurulumdan sonra bazı şeyleri, yalnız ilginçtir bootta help yazdım öyle devam etti ama interneti gördü etherneti daha doğrusu.
Şuan güncelleştirmelere de tik koyarak devam ettim.
Bittiğinde buradan yazarım tekrar.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 13 Ağustos 2018 - 18:23:36

Şuan ethernet ile baglanabiliyorum ancak ilerde lazım olsa diye soruyorum wifi için ne yapmalıyım ?

speakerXXL

Kablosuz ağ cihazı donanımsal olarak kilitli görünüyor, FN+F2 tuş kombinasyonu (farklı bir kombinasyonda olabilir, aksi durumda aygıtın dokümanlarını incelersiniz) ile açmayı deneyebilirsiniz.

Söylemeden edemedim, yabancı forumlarda saniyesinde cevap alıyordunuz halbuki... Forum ortamlarının gönüllü olarak destek verdiğini gönlümüzün bir köşesine not etmekte fayda olacağını düşünüyorum, her şeyin öncesi anlayış, saygılar.

sancaktar34

Evet alıyordum ağ etherneti öyle çözdüm ancak ingilizcem ve arapçam kısıtlı olduğu için derdimi pek anlatamadım. Bakın forumun ne olduğunu çok iyi biliyorum. Kendimde bi çok forumda bildiğim konularda hemen yardımcı olurum genelde blockchain konusunda mesela ..
Ama şunu anlamıyorum bu sorunlar daha önce pek çok kez yaşanmıştır nadir bir sorun değildir diye tahmin ediyorum ki ben ubuntuyu 3 gündür kullanmaya başladım. En azından bilgili birilerinin yardımcı olmasını bekliyor insan foruma girince.
Ancak yabancılarda ki soruna balıklama atlama, yardım etmeye çalışma, bilgiyi paylaşma olayı maalesef hiç bir türk forumunda daha denk gelemedim.
Ayrıca ben kendi adıma söyleyeyim hiç bir forumda " Forum ortamlarının gönüllü olarak destek verdiğini gönlümüzün bir köşesine not etmekte fayda olacağını düşünüyorum, her şeyin öncesi anlayış, " şunu demedim, demeye gerekte duymadım, dememde..
Neden ?
Çünkü karşımdaki ile sorunu olan biri ile empati kurabiliyorum.
Zira evet herkes bilgi paylaşıyor yardımcı olmaya çalışıyor.. Ancak benim kastettiğim noktayı cümlemin tamamını okursanız anlarsınız!
Ayrıca şu yaşadığım sorunları 1 yıllık bir kullanıcı kaç dakikada çözer ?
https://forum.ubuntu-tr.net/index.php?topic=59417.0
Buyrun bakın ben kendi kendime çözdüm çoğunu ama her sorun kaç saatimi aldı. Ne vardı yani biri deseydi ki hoşgeldin ubuntu dünyasına bu sorun şundan dolayı diye en azından çözümü değilde mantığını yazsaydı ?
Bu arada cevabınıza gelirsek kullandığım klavyede FN tuşu yok onun yerine geçerli bir tuş var mı? Yada en azından harici wifi adaptörünü nasıl devreye sokabilirim ? Windowsta direk takıp kullanıyordum. Adaptör inca iuwa-300n..