yenileme sonrası sorun

Başlatan okkadiroglu, 02 Ağustos 2018 - 17:02:43

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

okkadiroglu

İyi günler,

Bir hafta kadar önce yenileme yaptığımda flightgear sorun yaratmıştı, bir iki gün sonra sorun kendiliğinden çözüldü ve yenileme tamamlandı. En son yenilemeyi yaptığımda sudo apt full-upgrade komutuna

Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
35 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n]


yanıtını alıyorum. Eğer y komutu verirsem bu kez (yanıt çok uzun özür dileyerek ekliyorum)

Setting up python3 (3.6.5-3ubuntu1) ...
running python rtupdate hooks for python3.6...
E: py3compile:183: cannot create directory /usr/share/hplip/ui5/__pycache__: FileNotFoundError(2, 'No such file or directory')
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/aboutdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/aboutdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/aligndialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/aligndialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/cleandialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/cleandialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/colorcaldialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/colorcaldialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devicesetupdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devicesetupdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/deviceuricombobox.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devmgr5.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devmgr5_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devmgr_ext.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/fabgrouptable.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/fabnametable.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/fabwindow.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/fabwindow_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/faxsetupdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/faxsetupdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/filetable.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/firmwaredialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/firmwaredialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/infodialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/infodialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/linefeedcaldialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/linefeedcaldialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/loadpapergroupbox.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/makecopiesdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/makecopiesdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/mimetypesdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/mimetypesdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/nodevicesdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/nodevicesdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/plugindiagnose.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/plugindiagnose_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/plugindialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/plugindialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/pluginlicensedialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/pluginlicensedialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/pqdiagdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/pqdiagdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printernamecombobox.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printsettings_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printsettingsdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printsettingsdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printsettingstoolbox.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printtestpagedialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printtestpagedialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/queuesconf.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/readonlyradiobutton.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/sendfaxdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/sendfaxdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/settingsdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/settingsdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/setupdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/setupdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/setupdialog_base5.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/systemtray.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/systrayframe.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/systrayframe_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/ui_utils.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/upgradedialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/upgradedialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/wifisetupdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/wifisetupdialog_base.py'
error running python rtupdate hook hplip-data
dpkg: error processing package python3 (--configure):
installed python3 package post-installation script subprocess returned error exit status 4
dpkg: dependency problems prevent configuration of python3-update-manager:
python3-update-manager depends on python3:any (>= 3.3.2-2~); however:
  Package python3 is not configured yet.

dpkg: error processing package python3-update-manager (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of software-properties-kde:
software-properties-kde depends on python3:any (>= 3.3.2-2~); however:
  Package python3 is not configured yet.
software-properties-kde depends on python3; however:
  Package python3 is not configured yet.

dpkg: error processing package software-properties-kde (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of netplan.io:
netplan.io depends on python3; however:
  Package python3 is not configured yet.

dpkg: error processing package netplan.io (--configure):
dependency problems - leaving unconfigured
dpkg:No apport report written because the error message indicates its a followup error from a previous failure.
                                                                                                               No apport report written because the error message indicates its a followup error from a previous failure.
                           No apport report written because MaxReports is reached already
                                                                                         No apport report written because MaxReports is reached already
                                                                                                                                                       No apport report written because MaxReports is reached already
                       No apport report written because MaxReports is reached already
                                                                                     No apport report written because MaxReports is reached already
                                                                                                                                                   No apport report written because MaxReports is reached already
                   No apport report written because MaxReports is reached already
                                                                                 No apport report written because MaxReports is reached already
                                                                                                                                                dependency problems prevent configuration of ubuntu-release-upgrader-core:
ubuntu-release-upgrader-core depends on python3:any (>= 3.2~); however:
  Package python3 is not configured yet.

dpkg: error processing package ubuntu-release-upgrader-core (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of software-properties-gtk:
software-properties-gtk depends on python3:any (>= 3.3.2-2~); however:
  Package python3 is not configured yet.
software-properties-gtk depends on python3; however:
  Package python3 is not configured yet.

dpkg: error processing package software-properties-gtk (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of ubuntu-release-upgrader-qt:
ubuntu-release-upgrader-qt depends on ubuntu-release-upgrader-core (= 1:18.04.21); however:
  Package ubuntu-release-upgrader-core is not configured yet.

dpkg: error procesNo apport report written because MaxReports is reached already
                                                                                No apport report written because MaxReports is reached already
                                                                                                                                              No apport report written because MaxReports is reached already
              sing package ubuntu-release-upgrader-qt (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of nplan:
nplan depends on netplan.io; however:
  Package netplan.io is not configured yet.

dpkg: error processing package nplan (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of unattended-upgrades:
unattended-upgrades depends on python3; however:
  Package python3 is not configured yet.

dpkg: error processing package unattended-upgrades (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of update-manager:
update-manager depends on python3:any (>= 3.3.2-2~); however:
  Package python3 is not configured yet.

dpkg: error processing package update-manager (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of python3-software-properties:
python3-software-properties depends on python3:any (>= 3.3.2-2~); however:
  Package python3 is not configured yet.
python3-software-properties depends on python3; however:
  Package python3 is not configured yet.

dpkg: error processing package python3-software-properties (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of python3-dbg:
python3-dbg depends on python3 (= 3.6.5-3ubuntu1); however:
  Package python3 is not configured yet.

dpkg: error processing package python3-dbg (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent processing triggers for gnome-menus:
gnome-menus depends on python3:any (>= 3.1~); however:
  Package python3 is not configured yet.

dpkg: error processing package gnome-menus (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent configuration of pyNo apport report written because MaxReports is reached already
                                                                                                                   thon3-distupgrade:
python3-distupgrade depends on python3:any (>= 3.3.2-2~); however:
  Package python3 is not configured yet.
python3-distupgrade depends on python3-update-manager (>= 1:0.196.2~); however:
  Package python3-update-manager is not configured yet.

dpkg: error processing package python3-distupgrade (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of software-properties-common:
software-properties-common depends on python3:any (>= 3.3.2-2~); however:
  Package python3 is not configured yet.
software-properties-common depends on python3; however:
  Package python3 is not configured yet.
software-properties-common depends on python3-software-properties (= 0.96.24.32.4); however:
  Package python3-software-properties is not configured yet.

dpkg: error processing package software-properties-common (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of python3-cryptography:
python3-cryptography depends on python3 (>= 3~); however:
  Package python3 is not configured yet.
python3-cryptography depends on python3:any (>= 3.4~); however:
  Package python3 is not configured yet.

dpkg: error processing package python3-cryptography (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of ubuntu-release-upgrader-gtk:
ubuntu-release-upgrader-gtk depends on ubuntu-release-upgrader-core (= 1:18.04.21); however:
  Package ubuntu-release-upgrader-core is not configured yet.
ubuntu-release-upgrader-gtk depends on update-manager; however:
  Package update-manager is not configured yet.
ubuntu-release-upgrader-gtk depends on python3-distupgrade (= 1:18.04.21); however:
  Package python3-distupgrade is not configured yet.

dpkg: error processing package ubuntu-release-upgrader-gtk (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of update-manager-core:
update-manager-core depends on python3:any (>= 3.2~); however:
  Package python3 is not configured yet.
update-manager-core depends on python3-update-manager (= 1:18.04.11.4); however:
  Package python3-update-manager is not configured yet.
update-manager-core depends on ubuntu-release-upgrader-core (>= 1:18.04.9); however:
  Package ubuntu-release-upgrader-core is not configured yet.

dpkg: error processing package update-manager-core (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of python3-apt:
python3-apt depends on python3 (<< 3.7); however:
  Package python3 is not configured yet.
python3-apt depends on python3 (>= 3.6~); however:
  Package python3 is not configured yet.
python3-apt depends on python3:any (>= 3.3.2-2~); however:
  Package python3 is not configured yet.

dpkg: error processing package python3-apt (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: too many errors, stopping
No apport report written because MaxReports is reached already
                                                              Errors were encountered while processing:
python3
python3-update-manager
software-properties-kde
netplan.io
ubuntu-release-upgrader-core
software-properties-gtk
ubuntu-release-upgrader-qt
nplan
unattended-upgrades
update-manager
python3-software-properties
python3-dbg
gnome-menus
python3-distupgrade
software-properties-common
python3-cryptography
ubuntu-release-upgrader-gtk
update-manager-core
gconf2
python3-apt
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
gconf2
Processing was halted because there were too many errors.
E: Sub-process /usr/bin/dpkg returned an error code (1)

phyton3 de sorun olabileceğini düşünüp

sudo apt-get --reinstall install python3

komutu verirsem

Reading package lists... Done
Building dependency tree       
Reading state information... Done
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded.
35 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
E: Internal Error, No file name for python3:amd64

yanitini alıyorum.

sudo apt install -f

komutuna yukarıdaki gibi çok uzun bir hatalar listesi alıyorum. Backup alamıyorum, yüklü olmasına rağmen gvfs-backends yüklü olmadığın söyleyip yüklemeyi öneriyor, kabul edince de phyton3 paketi ile ilgili bir hatadan söz ediyor. Neler oluyor ne yapmam gerek?

Yardımlarınıza teşekkür ederim. Saygılarımla


O.K.Kadiroğlu

.py

#1
python 3.6 nasıl yüklediniz ppa mı kullandınız? buarada neden 3.6 ben 3.6 versiyonun pek bir artısını göremedim bu versiyonu kullanmak için bana göre çok erken tam olarak oturmadığını düşünüyorum.

ls /etc/apt/sources.list.d

reinstall yerine python 3.6 yı tamemen kaldırmak işe yarayabilir:

sudo apt-get remove --purge python3.6


speakerXXL

Bununla ilgili bir hata kaydı açılmış. Buradaki mesajda yazılanları uygulamak önerilmiş.

okkadiroglu

Çok teşekkürler .py,

Ne yazık ki phyton konusunda tam ümmiyim. Hiç kullanmadım ve ben yüklemedim. sanırım en son update ile geldi.
O.K.Kadiroğlu