[Çözüldü] DELL XPS 15 Bluetooth Problemi

[howgy]

Bilgisayar Modeli; Dell xps 15
*fare Modeli: Everest Bluetooth *fare SM-BT31

Ubuntuyu yuklemeden test et kullaniyorken mausem sorunsuz bir sekilde calisiyordu fakat bir turlu ayarlayamadim tamamen ubuntu kurduktan sonra

Kod Seç Genişlet

00:1d.4 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #13 (rev f1)
00:1d.6 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #15 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 960M] (rev a2)
02:00.0 Network controller: Broadcom Corporation BCM43602 802.11ac Wireless LAN SoC (rev 01)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader (rev 01)
04:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller (rev 01)
howgy@HOWGY:~$ rfkill list
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
howgy@HOWGY:~$ clear

howgy@HOWGY:~$ lspci
00:00.0 Host bridge: Intel Corporation Sky Lake Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation Sky Lake PCIe Controller (x16) (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Skylake Integrated Graphics (rev 06)
00:04.0 Signal processing controller: Intel Corporation Skylake Processor Thermal Subsystem (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-H LPSS I2C Controller #0 (rev 31)
00:15.1 Signal processing controller: Intel Corporation Sunrise Point-H LPSS I2C Controller #1 (rev 31)
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #1 (rev f1)
00:1c.1 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #2 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #9 (rev f1)
00:1d.4 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #13 (rev f1)
00:1d.6 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #15 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 960M] (rev a2)
02:00.0 Network controller: Broadcom Corporation BCM43602 802.11ac Wireless LAN SoC (rev 01)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader (rev 01)
04:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller (rev 01)
howgy@HOWGY:~$

Kod Seç Genişlet

howgy@HOWGY:~$ rfkill list
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
howgy@HOWGY:~$



Kod Seç Genişlet

howgy@HOWGY:~$ rfkill list
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
howgy@HOWGY:~$ clear
















howgy@HOWGY:~$ cat /etc/bluetooth/main.conf
[General]

# Default adaper name
# Defaults to 'BlueZ X.YZ'
#Name = BlueZ

# Default device class. Only the major and minor device class bits are
# considered. Defaults to '0x000000'.
#Class = 0x000100

# How long to stay in discoverable mode before going back to non-discoverable
# The value is in seconds. Default is 180, i.e. 3 minutes.
# 0 = disable timer, i.e. stay discoverable forever
#DiscoverableTimeout = 0

# How long to stay in pairable mode before going back to non-discoverable
# The value is in seconds. Default is 0.
# 0 = disable timer, i.e. stay pairable forever
#PairableTimeout = 0

# Automatic connection for bonded devices driven by platform/user events.
# If a platform plugin uses this mechanism, automatic connections will be
# enabled during the interval defined below. Initially, this feature
# intends to be used to establish connections to ATT channels. Default is 60.
#AutoConnectTimeout = 60

# Use vendor id source (assigner), vendor, product and version information for
# DID profile support. The values are separated by ":" and assigner, VID, PID
# and version.
# Possible vendor id source values: bluetooth, usb (defaults to usb)
#DeviceID = bluetooth:1234:5678:abcd

# Do reverse service discovery for previously unknown devices that connect to
# us. This option is really only needed for qualification since the BITE tester
# doesn't like us doing reverse SDP for some test cases (though there could in
# theory be other useful purposes for this too). Defaults to 'true'.
#ReverseServiceDiscovery = true

# Enable name resolving after inquiry. Set it to 'false' if you don't need
# remote devices name and want shorter discovery cycle. Defaults to 'true'.
#NameResolving = true

# Enable runtime persistency of debug link keys. Default is false which
# makes debug link keys valid only for the duration of the connection
# that they were created for.
#DebugKeys = false

# Restricts all controllers to the specified transport. Default value
# is "dual", i.e. both BR/EDR and LE enabled (when supported by the HW).
# Possible values: "dual", "bredr", "le"
#ControllerMode = dual

# Enables Multi Profile Specification support. This allows to specify if
# system supports only Multiple Profiles Single Device (MPSD) configuration
# or both Multiple Profiles Single Device (MPSD) and Multiple Profiles Multiple
# Devices (MPMD) configurations.
# Possible values: "off", "single", "multiple"
#MultiProfile = off

# Permanently enables the Fast Connectable setting for adapters that
# support it. When enabled other devices can connect faster to us,
# however the tradeoff is increased power consumptions. This feature
# will fully work only on kernel version 4.1 and newer. Defaults to
# 'false'.
#FastConnectable = false

#[Policy]
#
# The ReconnectUUIDs defines the set of remote services that should try
# to be reconnected to in case of a link loss (link supervision
# timeout). The policy plugin should contain a sane set of values by
# default, but this list can be overridden here. By setting the list to
# empty the reconnection feature gets disabled.
#ReconnectUUIDs=00001112-0000-1000-8000-00805f9b34fb, 0000111f-0000-1000-8000-00805f9b34fb, 0000110a-0000-1000-8000-00805f9b34fb

# ReconnectAttempts define the number of attempts to reconnect after a link
# lost. Setting the value to 0 disables reconnecting feature.
#ReconnectAttempts=7

# ReconnectIntervals define the set of intervals in seconds to use in between
# attempts.
# If the number of attempts defined in ReconnectAttempts is bigger than the
# set of intervals the last interval is repeated until the last attempt.
#ReconnectIntervals=1, 2, 4, 8, 16, 32, 64

# AutoEnable defines option to enable all controllers when they are found.
# This includes adapters present on start as well as adapters that are plugged
# in later on. Defaults to 'false'.
#AutoEnable=false
howgy@HOWGY:~$


[mendirec]

[mention=635042]@howgy[/mention] Şu komut ile gelen pencerede

Kod Seç Genişlet

sudo -H gedit /etc/bluetooth/main.conf

en altta bulunan şu satırı "#AutoEnable=false" şu hale getir. "AutoEnable=true"
Dikkat et başında "#" işareti olmayacak.

Son olarak aşağıdaki komut ile servisi yeniden başlat ve durumu kontrol et.

Kod Seç Genişlet

sudo service /etc/init.d/bluetooth restart


https://askubuntu.com/questions/787023/bluetooth-not-working-on-ubuntu-16-04-lts

[howgy]

dediginiz gibi degistirdim fakat bluetooth u yeniden baslatmaya calisirken soyle bir sey ciktiladi

Kod Seç Genişlet

howgy@HOWGY:~$ sudo service /etc/init.d/bluetooth restart
Failed to restart etc-init.d-bluetooth.service.mount: Unit etc-init.d-bluetooth.service.mount not found.
howgy@HOWGY:~$



[mendirec]

[mention=635050]@howgy[/mention] Bilgisayarı yeniden başlattıktan sonra duruma bak lütfen.

[howgy]

yeniden baslattim fakat halen hic bir aygitini bulamiyor

[mendirec]

[mention=635070]@howgy[/mention] Şu komuttan sonra tarama yapar mısın?

Kod Seç Genişlet

rfkill unblock all
Bir de şu komutun çıktısına tekrar bakalım.

Kod Seç Genişlet

cat /etc/bluetooth/main.conf

https://askubuntu.com/questions/938228/how-to-enable-bluetooth-at-startup-16-04-lts
https://askubuntu.com/questions/776806/bluetooth-on-ubuntu-16-04

[howgy]

Kod Seç Genişlet

howgy@HOWGY:~$ rfkill unblock all
howgy@HOWGY:~$ cat /etc/bluetooth/main.conf
[General]

# Default adaper name
# Defaults to 'BlueZ X.YZ'
#Name = BlueZ

# Default device class. Only the major and minor device class bits are
# considered. Defaults to '0x000000'.
#Class = 0x000100

# How long to stay in discoverable mode before going back to non-discoverable
# The value is in seconds. Default is 180, i.e. 3 minutes.
# 0 = disable timer, i.e. stay discoverable forever
#DiscoverableTimeout = 0

# How long to stay in pairable mode before going back to non-discoverable
# The value is in seconds. Default is 0.
# 0 = disable timer, i.e. stay pairable forever
#PairableTimeout = 0

# Automatic connection for bonded devices driven by platform/user events.
# If a platform plugin uses this mechanism, automatic connections will be
# enabled during the interval defined below. Initially, this feature
# intends to be used to establish connections to ATT channels. Default is 60.
#AutoConnectTimeout = 60

# Use vendor id source (assigner), vendor, product and version information for
# DID profile support. The values are separated by ":" and assigner, VID, PID
# and version.
# Possible vendor id source values: bluetooth, usb (defaults to usb)
#DeviceID = bluetooth:1234:5678:abcd

# Do reverse service discovery for previously unknown devices that connect to
# us. This option is really only needed for qualification since the BITE tester
# doesn't like us doing reverse SDP for some test cases (though there could in
# theory be other useful purposes for this too). Defaults to 'true'.
#ReverseServiceDiscovery = true

# Enable name resolving after inquiry. Set it to 'false' if you don't need
# remote devices name and want shorter discovery cycle. Defaults to 'true'.
#NameResolving = true

# Enable runtime persistency of debug link keys. Default is false which
# makes debug link keys valid only for the duration of the connection
# that they were created for.
#DebugKeys = false

# Restricts all controllers to the specified transport. Default value
# is "dual", i.e. both BR/EDR and LE enabled (when supported by the HW).
# Possible values: "dual", "bredr", "le"
#ControllerMode = dual

# Enables Multi Profile Specification support. This allows to specify if
# system supports only Multiple Profiles Single Device (MPSD) configuration
# or both Multiple Profiles Single Device (MPSD) and Multiple Profiles Multiple
# Devices (MPMD) configurations.
# Possible values: "off", "single", "multiple"
#MultiProfile = off

# Permanently enables the Fast Connectable setting for adapters that
# support it. When enabled other devices can connect faster to us,
# however the tradeoff is increased power consumptions. This feature
# will fully work only on kernel version 4.1 and newer. Defaults to
# 'false'.
#FastConnectable = false

#[Policy]
#
# The ReconnectUUIDs defines the set of remote services that should try
# to be reconnected to in case of a link loss (link supervision
# timeout). The policy plugin should contain a sane set of values by
# default, but this list can be overridden here. By setting the list to
# empty the reconnection feature gets disabled.
#ReconnectUUIDs=00001112-0000-1000-8000-00805f9b34fb, 0000111f-0000-1000-8000-00805f9b34fb, 0000110a-0000-1000-8000-00805f9b34fb

# ReconnectAttempts define the number of attempts to reconnect after a link
# lost. Setting the value to 0 disables reconnecting feature.
#ReconnectAttempts=7

# ReconnectIntervals define the set of intervals in seconds to use in between
# attempts.
# If the number of attempts defined in ReconnectAttempts is bigger than the
# set of intervals the last interval is repeated until the last attempt.
#ReconnectIntervals=1, 2, 4, 8, 16, 32, 64

# AutoEnable defines option to enable all controllers when they are found.
# This includes adapters present on start as well as adapters that are plugged
# in later on. Defaults to 'false'.
AutoEnable=true
howgy@HOWGY:~$


[mendirec]

[mention=635086]@howgy[/mention] Sırasıyla komutları uygula lütfen.

Kod Seç Genişlet

sudo apt-get install blueman bluez-utils bluez bluetooth
sudo /etc/init.d/bluetooth start


Durumu tekrar gözlemle lütfen. Bir de telefon ile bluetooth bağlantısı yapmayı dener misin?

[howgy]

Kod Seç Genişlet

howgy@HOWGY:~$ sudo apt-get install blueman bluez-utils bluez bluetooth
[sudo] password for howgy:
Paket listeleri okunuyor... Bitti
Bağımlılık ağacı oluşturuluyor       
Durum bilgisi okunuyor... Bitti     
bluez-utils paketi mevcut değil, ancak başka paket içerisinden işaret edilmiş.
Bu durum bu paketin kayıp, eskidiği için bırakılmış, ya da başka bir
yazılım kaynağında bulunduğu anlamına gelebilir.
Yine de aşağıdaki paketler onun yerine geçecek:
  bluez:i386 bluez

N: '/etc/apt/sources.list.d/' dizinindeki 'noobslab-ubuntu-apps-xenial.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor
N: '/etc/apt/sources.list.d/' dizinindeki 'graphics-drivers-ubuntu-ppa-xenial.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor
N: '/etc/apt/sources.list.d/' dizinindeki 'sublime-text.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor
N: '/etc/apt/sources.list.d/' dizinindeki 'playonlinux.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor
N: '/etc/apt/sources.list.d/' dizinindeki 'nilarimogard-ubuntu-webupd8-xenial.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor
E: 'bluez-utils' paketi için kurulum adayı yok
howgy@HOWGY:~$ sudo /etc/init.d/bluetooth start
[ ok ] Starting bluetooth (via systemctl): bluetooth.service.
howgy@HOWGY:~$




bi degisiklik olmadi hic bir sey bulamiyor yalniz anlayamadigim ve bana sacma gelen sey su deneme ubuntuyu kullaniyorken cat diye bulmustu hic bir degisiklik yapmamistim simdi neden bulamiyor cildircam

[mendirec]

[mention=635094]@howgy[/mention] İlk önce bağlantıda belirtilen dosyayı indir.
https://www.dropbox.com/s/8goc4omhnzxij93/BCM-0a5c-6410.hcd?dl=0
Şu komutla dosya yöneticisini aç

Kod Seç Genişlet

sudo -H gedit nautilus
indirdiğin dosyayı şu dizin içine at.

Kod Seç Genişlet

/lib/firmware/brcm/
Daha sonra bilgisayarı yeniden başlat ve durumu gözle.
https://ubuntuforums.org/showthread.php?t=2317843

[howgy]

eveeeeet sonunda oldu cok tesekkurler fakat soyle bir sey var sanki farede delay var gecikme var kasiyor gibi bu neden oluyor ? hatta bildigin kasa kasa ilerliyor

[mendirec]

[mention=635103]@howgy[/mention] Şu komutları sırasıyla uygular mısın?

Kod Seç Genişlet

sudo cp /etc/modprobe.d/iwlwifi.conf /etc/modprobe.d/iwlwifi.conf.backup
sudo echo "options iwlwifi bt_coex_active=0" >> /etc/modprobe.d/iwlwifi.conf
sudo modprobe -r btusb
sudo modprobe btusb

https://askubuntu.com/questions/663500/ubuntu-14-04-bluetooth-mouse-lags-time-by-time
https://askubuntu.com/questions/763413/how-can-i-get-rid-of-mouse-lag-under-ubuntu
https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1454450

[howgy]

Kod Seç Genişlet

howgy@HOWGY:~$ sudo cp /etc/modprobe.d/iwlwifi.conf /etc/modprobe.d/iwlwifi.conf.backup
[sudo] password for howgy:
howgy@HOWGY:~$ sudo echo "options iwlwifi bt_coex_active=0" >> /etc/modprobe.d/iwlwifi.conf
bash: /etc/modprobe.d/iwlwifi.conf: Erişim engellendi
howgy@HOWGY:~$ sudo modprobe -r btusb
howgy@HOWGY:~$ sudo modprobe btusb
howgy@HOWGY:~$



komutlari uyguladim ama ikinci komut yemedi sanirim


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 31 Aralık 2017 - 06:45:58
Lag sorunu devam ediyor accayip bir sekilde ozellikle bir uygulama ustundeyken ne bileyim forumdayken mesela suanda