Kali Linux-WİN10 Wifi Sorunu

[p3nt3st_]

Arkadaşlar Selamun Aleyküm. Aranıza yeni katıldım. Sorunumla ilgili zaten hali hazırda takipteydim. Üye olmak bugüneymiş.

Arkadaşlar ben Windows 10 x64 bit İ5 işlemci Acer Bilgisayar Kullanıyorum. Sorunuma gelecek olursak ; Virtual Box sanal bilgisayarda Kurulu olan Kali Linux 2017.3 için Harici wifi kartım var. Bunu bağladığım zaman Tabii Ana makine olan (Windows 10) üzerindeki Wifi'den Kopuyorum. Wifiyi Kali Linux'ta devre dışı bırakırsam da Windows 10'a bağlanıyor. Yani Wifiler mi çakışıyor ben tam çözemedim. Bir kaç bağdaştırıcıları Bridge adaptör modunda ikisini köprülemişler bende ona benzer * bir şey yaptım halen sorunum aynı

Bununla ilgili sıkıntı yaşıyorum. Ana bilgisayarda harici wifi kartı üzerinden bağlıyım ve Sanal Bilgisayar üzerinden de harici Wifi kartıma bağlı kalmak istiyorum ...

Bana Yardımcı olur musunuz ? Ne gibi Yol izlemeliyim. Bu sorunu oldukça derinden araştırmama rağmen buna benzer bir sorunla karşılaşan olursa da cevabını burada bulur diye  , Gerekli nacizane cevaplarınızı bekliyorum . Teşekkürler.

NOT : Harici Wifi Kartım Modeli ; Ralink 802.11 n WLAN

Gerekli Kod Etiketlerini Ekliyorum buraya ...

Kod Seç Genişlet

lspci
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
00:01.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter
00:03.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
00:04.0 System peripheral: InnoTek Systemberatung GmbH VirtualBox Guest Service
00:05.0 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 01)
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)
00:08.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
00:09.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
00:0c.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller
00:0d.0 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 02)


Kod Seç Genişlet

cat /etc/lsb-release
DISTRIB_ID=Kali
DISTRIB_RELEASE=kali-rolling
DISTRIB_CODENAME=kali-rolling
DISTRIB_DESCRIPTION="Kali GNU/Linux Rolling"


Kod Seç Genişlet

cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.13.0-kali1-amd64 root=UUID=32c0f9c8-31a7-49cd-a305-f3f3ba991d3b ro initrd=/install/initrd.gz quiet


Kod Seç Genişlet

uname -a
Linux t3cno31l1m 4.13.0-kali1-amd64 #1 SMP Debian 4.13.4-2kali1 (2017-10-16) x86_64 GNU/Linux


Kod Seç Genişlet

lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 80ee:0021 VirtualBox USB Tablet
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


Kod Seç Genişlet

ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        ether 08:00:27:46:a7:2d  txqueuelen 1000  (Ethernet)
        RX packets 76  bytes 7159 (6.9 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 08:00:27:8b:06:eb  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth2: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 08:00:27:54:a6:91  txqueuelen 1000  (Ethernet)
        RX packets 78  bytes 16993 (16.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 122  bytes 11534 (11.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 1375  bytes 350450 (342.2 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1375  bytes 350450 (342.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


Kod Seç Genişlet

iwconfig
eth2      no wireless extensions.

lo        no wireless extensions.

eth1      no wireless extensions.

eth0      no wireless extensions.

wlan0     IEEE 802.11  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm   
          Retry short  long limit:2   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off


Kod Seç Genişlet

iwlist scanning
eth2      Interface doesn't support scanning.

lo        Interface doesn't support scanning.

eth1      Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

wlan0     Scan completed :
          Cell 01 - Address: 1A:5B:0E:10:36:DA
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=40/70  Signal level=-70 dBm 
                    Encryption key:off
                    ESSID:"Sanko_Wifi"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000bc35ba95d9
                    Extra: Last beacon: 28ms ago
                    IE: Unknown: 000A53616E6B6F5F57696669
                    IE: Unknown: 010882848B960C121824
                    IE: Unknown: 03010B
                    IE: Unknown: 0706494C20010D14
                    IE: Unknown: 2A0100
                    IE: Unknown: 32043048606C
                    IE: Unknown: 2D1A8D011BFFFF0000000000000000000001000000000406E6A70C00
                    IE: Unknown: 3D160B080400000000000000000000000000000000000000
                    IE: Unknown: 7F080000000000000040
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
                    IE: Unknown: DD2000090F01006F0A2A4E8E7C8CCAE07D654C2DF0E81FEDFC60EDC5CAAF53AF146B
                    IE: Unknown: DD0700090F06000040
                    IE: Unknown: DD0900037F01010000FF7F
          Cell 02 - Address: 2A:5B:0E:10:36:DA
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=40/70  Signal level=-70 dBm 
                    Encryption key:on
                    ESSID:"Yonetim_Wifi"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000bc35c02180
                    Extra: Last beacon: 156ms ago
                    IE: Unknown: 000C596F6E6574696D5F57696669
                    IE: Unknown: 010882848B960C121824
                    IE: Unknown: 03010B
                    IE: Unknown: 050400010000
                    IE: Unknown: 0706494C20010D14
                    IE: Unknown: 2A0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                       Preauthentication Supported
                    IE: Unknown: 32043048606C
                    IE: Unknown: 2D1A8D011BFFFF0000000000000000000001000000000406E6A70C00
                    IE: Unknown: 3D160B080400000000000000000000000000000000000000
                    IE: Unknown: 7F080000000000000040
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
                    IE: Unknown: DD2000090F01005F0A2A4E8E7C8CCAE07D654C2DF0E81FEDFC60EDC5CAAF53AF146B
                    IE: Unknown: DD0700090F06000040
                    IE: Unknown: DD0900037F01010000FF7F
          Cell 03 - Address: 3A:5B:0E:10:36:DA
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=40/70  Signal level=-70 dBm 
                    Encryption key:on
                    ESSID:""
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000bc35be9180
                    Extra: Last beacon: 236ms ago
                    IE: Unknown: 0000
                    IE: Unknown: 010882848B960C121824
                    IE: Unknown: 03010B
                    IE: Unknown: 050400010000
                    IE: Unknown: 0706494C20010D14
                    IE: Unknown: 2A0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                       Preauthentication Supported
                    IE: Unknown: 32043048606C
                    IE: Unknown: 2D1A8D011BFFFF0000000000000000000001000000000406E6A70C00
                    IE: Unknown: 3D160B080400000000000000000000000000000000000000
                    IE: Unknown: 7F080000000000000040
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
                    IE: Unknown: DD2000090F01004F0A2A4E8E7C8CCAE07D654C2DF0E81FEDFC60EDC5CAAF53AF146B
                    IE: Unknown: DD0700090F06000040
                    IE: Unknown: DD0900037F01010000FF7F
          Cell 04 - Address: 08:5B:0E:10:36:DA
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=42/70  Signal level=-68 dBm 
                    Encryption key:on
                    ESSID:"Bartin_Wifi"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000bc35b85180
                    Extra: Last beacon: 696ms ago
                    IE: Unknown: 000B42617274696E5F57696669
                    IE: Unknown: 010882848B960C121824
                    IE: Unknown: 03010B
                    IE: Unknown: 050400010002
                    IE: Unknown: 0706494C20010D14
                    IE: Unknown: 2A0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                       Preauthentication Supported
                    IE: Unknown: 32043048606C
                    IE: Unknown: 2D1A8D011BFFFF0000000000000000000001000000000406E6A70C00
                    IE: Unknown: 3D160B080400000000000000000000000000000000000000
                    IE: Unknown: 7F080000000000000040
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
                    IE: Unknown: DD2000090F01007D0A2A4E8E7C8CCAE07D654C2DF0E81FEDFC60EDC5CAAF53AF146B
                    IE: Unknown: DD0700090F06000040
                    IE: Unknown: DD0900037F01010000FF7F
          Cell 05 - Address: 3A:5B:0E:80:94:3B
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=30/70  Signal level=-80 dBm 
                    Encryption key:on
                    ESSID:""
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000000856d7ed80
                    Extra: Last beacon: 4564ms ago
                    IE: Unknown: 0000
                    IE: Unknown: 010882848B960C121824
                    IE: Unknown: 03010B
                    IE: Unknown: 050400010000
                    IE: Unknown: 0706474220010D14
                    IE: Unknown: 2A0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                       Preauthentication Supported
                    IE: Unknown: 32043048606C
                    IE: Unknown: 2D1A8D0103FFFF0000000000000000000001000000000406E6A70C00
                    IE: Unknown: 3D160B080400000000000000000000000000000000000000
                    IE: Unknown: 7F080000000000000040
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
                    IE: Unknown: DD2000090F01002CEC8C69CA88932A8BCF318AFC96A21A1CDABD92C7FD8D80D05BA8
                    IE: Unknown: DD0700090F06000040
                    IE: Unknown: DD0900037F01010000FF7F
          Cell 06 - Address: 08:5B:0E:80:94:3B
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=32/70  Signal level=-78 dBm 
                    Encryption key:on
                    ESSID:"Bartin_Wifi"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000000857073180
                    Extra: Last beacon: 1444ms ago
                    IE: Unknown: 000B42617274696E5F57696669
                    IE: Unknown: 010882848B960C121824
                    IE: Unknown: 03010B
                    IE: Unknown: 050400010000
                    IE: Unknown: 0706474220010D14
                    IE: Unknown: 2A0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                       Preauthentication Supported
                    IE: Unknown: 32043048606C
                    IE: Unknown: 2D1A8D0103FFFF0000000000000000000001000000000406E6A70C00
                    IE: Unknown: 3D160B080400000000000000000000000000000000000000
                    IE: Unknown: 7F080000000000000040
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
                    IE: Unknown: DD2000090F01001EEC8C69CA88932A8BCF318AFC96A21A1CDABD92C7FD8D80D05BA8
                    IE: Unknown: DD0700090F06000040
                    IE: Unknown: DD0900037F01010000FF7F


Kod Seç Genişlet

lsmod
Module                  Size  Used by
arc4                   16384  2
rt2800usb              28672  0
rt2x00usb              20480  1 rt2800usb
rt2800lib             110592  1 rt2800usb
rt2x00lib              49152  3 rt2800lib,rt2800usb,rt2x00usb
mac80211              659456  3 rt2800lib,rt2x00lib,rt2x00usb
cfg80211              598016  2 rt2x00lib,mac80211
crc_ccitt              16384  1 rt2800lib
rfkill                 24576  3 cfg80211
fuse                   98304  3
vboxsf                 45056  1
joydev                 20480  0
snd_intel8x0           40960  4
ppdev                  20480  0
snd_ac97_codec        126976  1 snd_intel8x0
evdev                  24576  17
ac97_bus               16384  1 snd_ac97_codec
snd_pcm                98304  2 snd_ac97_codec,snd_intel8x0
intel_rapl_perf        16384  0
serio_raw              16384  0
pcspkr                 16384  0
snd_timer              32768  1 snd_pcm
snd                    77824  12 snd_ac97_codec,snd_timer,snd_intel8x0,snd_pcm
soundcore              16384  1 snd
sg                     32768  0
parport_pc             28672  0
parport                49152  2 parport_pc,ppdev
vboxvideo              53248  3
video                  40960  0
vboxguest             262144  6 vboxsf,vboxvideo
battery                20480  0
ac                     16384  0
ttm                    94208  1 vboxvideo
drm_kms_helper        151552  1 vboxvideo
button                 16384  0
drm                   348160  6 vboxvideo,ttm,drm_kms_helper
binfmt_misc            20480  1
ip_tables              24576  0
x_tables               36864  1 ip_tables
autofs4                40960  2
ext4                  614400  1
crc16                  16384  1 ext4
mbcache                16384  1 ext4
jbd2                   98304  1 ext4
crc32c_generic         16384  0
fscrypto               28672  1 ext4
ecb                    16384  0
sr_mod                 24576  0
cdrom                  61440  1 sr_mod
hid_generic            16384  0
usbhid                 49152  0
hid                   118784  2 hid_generic,usbhid
sd_mod                 49152  3
ata_generic            16384  0
crct10dif_pclmul       16384  0
crc32_pclmul           16384  0
crc32c_intel           24576  2
ghash_clmulni_intel    16384  0
pcbc                   16384  0
aesni_intel           188416  0
aes_x86_64             20480  1 aesni_intel
crypto_simd            16384  1 aesni_intel
glue_helper            16384  1 aesni_intel
cryptd                 24576  3 crypto_simd,ghash_clmulni_intel,aesni_intel
ahci                   36864  2
libahci                32768  1 ahci
psmouse               143360  0
ata_piix               36864  0
libata                237568  4 ahci,ata_piix,libahci,ata_generic
i2c_piix4              24576  0
xhci_pci               16384  0
scsi_mod              212992  4 sd_mod,libata,sr_mod,sg
xhci_hcd              208896  1 xhci_pci
usbcore               245760  5 usbhid,rt2800usb,rt2x00usb,xhci_pci,xhci_hcd
usb_common             16384  1 usbcore
e1000                 139264  0


Kod Seç Genişlet

dmesg
[    0.000000] random: get_random_bytes called from start_kernel+0x3d/0x456 with crng_init=0
[    0.000000] Linux version 4.13.0-kali1-amd64 (devel@kali.org) (gcc version 6.4.0 20171010 (Debian 6.4.0-8)) #1 SMP Debian 4.13.4-2kali1 (2017-10-16)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-kali1-amd64 root=UUID=32c0f9c8-31a7-49cd-a305-f3f3ba991d3b ro initrd=/install/initrd.gz quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffeffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dfff0000-0x00000000dfffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[    0.000000] Hypervisor detected: KVM
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: No reference (HPET/PMTIMER) available
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR variable ranges disabled:
[    0.000000] MTRR: Disabled
[    0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[    0.000000] CPU MTRRs all blank - virtualized system.
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC 
[    0.000000] e820: last_pfn = 0xdfff0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffff88da8009fff0]
[    0.000000] Base memory trampoline at [ffff88da80099000] 99000 size 24576
[    0.000000] BRK [0x7a557000, 0x7a557fff] PGTABLE
[    0.000000] BRK [0x7a558000, 0x7a558fff] PGTABLE
[    0.000000] BRK [0x7a559000, 0x7a559fff] PGTABLE
[    0.000000] BRK [0x7a55a000, 0x7a55afff] PGTABLE
[    0.000000] BRK [0x7a55b000, 0x7a55bfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x34baf000-0x365cefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX  )
[    0.000000] ACPI: XSDT 0x00000000DFFF0030 00003C (v01 VBOX   VBOXXSDT 00000001 ASL  00000061)
[    0.000000] ACPI: FACP 0x00000000DFFF00F0 0000F4 (v04 VBOX   VBOXFACP 00000001 ASL  00000061)
[    0.000000] ACPI: DSDT 0x00000000DFFF0470 0021FF (v02 VBOX   VBOXBIOS 00000002 INTL 20100528)
[    0.000000] ACPI: FACS 0x00000000DFFF0200 000040
[    0.000000] ACPI: FACS 0x00000000DFFF0200 000040
[    0.000000] ACPI: APIC 0x00000000DFFF0240 00005C (v02 VBOX   VBOXAPIC 00000001 ASL  00000061)
[    0.000000] ACPI: SSDT 0x00000000DFFF02A0 0001CC (v01 VBOX   VBOXCPUT 00000002 INTL 20100528)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x11fff7000-0x11fffbfff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 1:1ffef001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 11059038630 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000011fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000dffeffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
[    0.000000] On node 0 totalpages: 1048462
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14272 pages used for memmap
[    0.000000]   DMA32 zone: 913392 pages, LIFO batch:31
[    0.000000]   Normal zone: 2048 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x25 (or later)
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfff0000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfffbffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
[    0.000000] e820: [mem 0xe0000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 38 pages/cpu @ffff88db9fc00000 s115224 r8192 d32232 u1048576
[    0.000000] pcpu-alloc: s115224 r8192 d32232 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1032057
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-kali1-amd64 root=UUID=32c0f9c8-31a7-49cd-a305-f3f3ba991d3b ro initrd=/install/initrd.gz quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4019336K/4193848K available (6587K kernel code, 1153K rwdata, 2964K rodata, 1472K init, 696K bss, 174512K reserved, 0K cma-reserved)
[    0.000000] ftrace: allocating 28602 entries in 112 pages
[    0.004000] Hierarchical RCU implementation.
[    0.004000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.004000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.004000] NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] tsc: Detected 2194.918 MHz processor
[    0.004000] Calibrating delay loop (skipped) preset value.. 4389.83 BogoMIPS (lpj=8779672)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170531
[    0.004000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.004000] Security Framework initialized
[    0.004000] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.004000] AppArmor: AppArmor disabled by boot time parameter
[    0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.004156] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.004176] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.004185] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.004401] CPU: Physical Processor ID: 0
[    0.004401] CPU: Processor Core ID: 0
[    0.004421] mce: CPU supports 0 MCE banks
[    0.004447] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.004448] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.004540] Freeing SMP alternatives memory: 28K
[    0.005579] smpboot: Max logical packages: 1
[    0.005911] x2apic enabled
[    0.006167] Switched APIC routing to physical x2apic.
[    0.007386] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.012000] smpboot: CPU0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[    0.012000] Performance Events: unsupported p6 CPU model 61 no PMU driver, software events only.
[    0.012000] Hierarchical SRCU implementation.
[    0.012000] smp: Bringing up secondary CPUs ...
[    0.012000] x86: Booting SMP configuration:
[    0.012000] .... node  #0, CPUs:      #1
[    0.004000] kvm-clock: cpu 1, msr 1:1ffef041, secondary cpu clock
[    0.004000] mce: CPU supports 0 MCE banks
[    0.012125] smp: Brought up 1 node, 2 CPUs
[    0.012125] smpboot: Total of 2 processors activated (8779.67 BogoMIPS)
[    0.012379] devtmpfs: initialized
[    0.012379] x86/mm: Memory block size: 128MB
[    0.012503] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.012503] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.012503] pinctrl core: initialized pinctrl subsystem
[    0.012503] NET: Registered protocol family 16
[    0.012503] cpuidle: using governor ladder
[    0.012503] cpuidle: using governor menu
[    0.012503] PCCT header not found.
[    0.012503] ACPI: bus type PCI registered
[    0.012503] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.012503] PCI: Using configuration type 1 for base access
[    0.016047] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.016065] ACPI: Added _OSI(Module Device)
[    0.016067] ACPI: Added _OSI(Processor Device)
[    0.016068] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.016069] ACPI: Added _OSI(Processor Aggregator Device)
[    0.016358] ACPI: Executed 1 blocks of module-level executable AML code
[    0.019031] ACPI: Interpreter enabled
[    0.019042] ACPI: (supports S0 S5)
[    0.019044] ACPI: Using IOAPIC for interrupt routing
[    0.019196] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.024000] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.024000] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.024000] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.024000] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.024240] PCI host bridge to bus 0000:00
[    0.024242] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.024243] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.024245] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.024246] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffdfffff window]
[    0.024247] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.024283] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.024805] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.025457] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
[    0.025860] pci 0000:00:01.1: reg 0x20: [io  0xd000-0xd00f]
[    0.026007] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.026008] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.026009] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.026010] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.026200] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
[    0.028387] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff pref]
[    0.052454] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.056131] pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
[    0.064127] pci 0000:00:03.0: reg 0x18: [io  0xd010-0xd017]
[    0.084587] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[    0.088007] pci 0000:00:04.0: reg 0x10: [io  0xd020-0xd03f]
[    0.092006] pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
[    0.096077] pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
[    0.112335] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
[    0.112495] pci 0000:00:05.0: reg 0x10: [io  0xd100-0xd1ff]
[    0.112557] pci 0000:00:05.0: reg 0x14: [io  0xd200-0xd23f]
[    0.113074] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[    0.116055] pci 0000:00:07.0: quirk: [io  0x4000-0x403f] claimed by PIIX4 ACPI
[    0.116064] pci 0000:00:07.0: quirk: [io  0x4100-0x410f] claimed by PIIX4 SMB
[    0.116343] pci 0000:00:08.0: [8086:100e] type 00 class 0x020000
[    0.120060] pci 0000:00:08.0: reg 0x10: [mem 0xf0820000-0xf083ffff]
[    0.124175] pci 0000:00:08.0: reg 0x18: [io  0xd240-0xd247]
[    0.144513] pci 0000:00:09.0: [8086:100e] type 00 class 0x020000
[    0.148099] pci 0000:00:09.0: reg 0x10: [mem 0xf0840000-0xf085ffff]
[    0.156060] pci 0000:00:09.0: reg 0x18: [io  0xd248-0xd24f]
[    0.172529] pci 0000:00:0c.0: [8086:1e31] type 00 class 0x0c0330
[    0.176048] pci 0000:00:0c.0: reg 0x10: [mem 0xf0860000-0xf086ffff]
[    0.200353] pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
[    0.203961] pci 0000:00:0d.0: reg 0x10: [io  0xd250-0xd257]
[    0.212000] pci 0000:00:0d.0: reg 0x18: [io  0xd260-0xd267]
[    0.220084] pci 0000:00:0d.0: reg 0x20: [io  0xd270-0xd27f]
[    0.224060] pci 0000:00:0d.0: reg 0x24: [mem 0xf0870000-0xf0871fff]
[    0.229556] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
[    0.229786] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
[    0.229873] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
[    0.229956] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[    0.230100] ACPI: Enabled 2 GPEs in block 00 to 07
[    0.232153] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.232155] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.232158] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.232159] vgaarb: loaded
[    0.232209] EDAC MC: Ver: 3.0.0
[    0.232449] PCI: Using ACPI for IRQ routing
[    0.232449] PCI: pci_cache_line_size set to 64 bytes
[    0.232449] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.232449] e820: reserve RAM buffer [mem 0xdfff0000-0xdfffffff]
[    0.232449] clocksource: Switched to clocksource kvm-clock
[    0.242490] VFS: Disk quotas dquot_6.6.0
[    0.242514] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.242588] pnp: PnP ACPI init
[    0.242651] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.242721] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
[    0.243533] pnp: PnP ACPI: found 2 devices
[    0.250554] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.250568] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.250570] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.250571] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.250573] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffdfffff window]
[    0.250656] NET: Registered protocol family 2
[    0.250952] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.251037] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.251122] TCP: Hash tables configured (established 32768 bind 32768)
[    0.251152] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.251163] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.251209] NET: Registered protocol family 1
[    0.251218] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.251258] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.251309] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.252552] PCI: CLS 0 bytes, default 64
[    0.252604] Unpacking initramfs...
[    0.720447] Freeing initrd memory: 26752K
[    0.720462] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.720465] software IO TLB [mem 0xdbff0000-0xdfff0000] (64MB) mapped at [ffff88db5bff0000-ffff88db5ffeffff]
[    0.720582] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.720867] audit: initializing netlink subsys (disabled)
[    0.722141] audit: type=2000 audit(1514147031.211:1): state=initialized audit_enabled=0 res=1
[    0.722447] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    0.722498] zbud: loaded
[    1.037581] Key type asymmetric registered
[    1.037582] Asymmetric key parser 'x509' registered
[    1.037606] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.037680] io scheduler noop registered
[    1.037681] io scheduler deadline registered
[    1.037695] io scheduler cfq registered (default)
[    1.037696] io scheduler mq-deadline registered
[    1.037808] intel_idle: does not run on family 6 model 61
[    1.037879] GHES: HEST is not enabled!
[    1.037939] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.038193] Linux agpgart interface v0.103
[    1.038288] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.038289] AMD IOMMUv2 functionality not available on this system
[    1.038482] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.039012] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.039018] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.039110] mousedev: PS/2 mouse device common for all mice
[    1.039330] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    1.039403] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[    1.039489] ledtrig-cpu: registered to indicate activity on CPUs
[    1.039876] NET: Registered protocol family 10
[    1.039955] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.040284] Segment Routing with IPv6
[    1.040310] mip6: Mobile IPv6
[    1.040312] NET: Registered protocol family 17
[    1.040314] mpls_gso: MPLS GSO support
[    1.040496] sched_clock: Marking stable (1040463091, 0)->(1287594111, -247131020)
[    1.040810] registered taskstats version 1
[    1.040824] zswap: loaded using pool lzo/zbud
[    1.041021] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.041444] rtc_cmos rtc_cmos: setting system clock to 2017-12-24 20:23:39 UTC (1514147019)
[    1.041468] PM: Hibernation image not present or could not be loaded.
[    1.043667] Freeing unused kernel memory: 1472K
[    1.043670] Write protecting the kernel read-only data: 12288k
[    1.044469] Freeing unused kernel memory: 1592K
[    1.046851] Freeing unused kernel memory: 1132K
[    1.048089] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.136590] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    1.136591] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.139149] ACPI: bus type USB registered
[    1.139168] usbcore: registered new interface driver usbfs
[    1.139174] usbcore: registered new interface driver hub
[    1.141045] usbcore: registered new device driver usb
[    1.145995] SCSI subsystem initialized
[    1.149879] libata version 3.00 loaded.
[    1.157777] AVX version of gcm_enc/dec engaged.
[    1.157778] AES CTR mode by8 optimization enabled
[    1.186603] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[    1.353887] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    1.526621] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:46:a7:2d
[    1.526631] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.527650] xhci_hcd 0000:00:0c.0: xHCI Host Controller
[    1.527659] xhci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 1
[    1.529263] xhci_hcd 0000:00:0c.0: hcc params 0x04000000 hci version 0x100 quirks 0x0000b930
[    1.529536] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.529538] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.529540] usb usb1: Product: xHCI Host Controller
[    1.529541] usb usb1: Manufacturer: Linux 4.13.0-kali1-amd64 xhci-hcd
[    1.529543] usb usb1: SerialNumber: 0000:00:0c.0
[    1.529724] hub 1-0:1.0: USB hub found
[    1.529771] hub 1-0:1.0: 8 ports detected
[    1.530200] xhci_hcd 0000:00:0c.0: xHCI Host Controller
[    1.530205] xhci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 2
[    1.530345] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.530347] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.530349] usb usb2: Product: xHCI Host Controller
[    1.530350] usb usb2: Manufacturer: Linux 4.13.0-kali1-amd64 xhci-hcd
[    1.530352] usb usb2: SerialNumber: 0000:00:0c.0
[    1.530512] hub 2-0:1.0: USB hub found
[    1.530551] hub 2-0:1.0: 6 ports detected
[    1.531229] piix4_smbus 0000:00:07.0: SMBus Host Controller at 0x4100, revision 0
[    1.531404] ata_piix 0000:00:01.1: version 2.13
[    1.532718] scsi host0: ata_piix
[    1.532852] scsi host1: ata_piix
[    1.532908] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[    1.532909] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[    1.532960] ahci 0000:00:0d.0: version 3.0
[    1.533810] ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
[    1.533987] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[    1.533989] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
[    1.534949] scsi host2: ahci
[    1.535046] ata3: SATA max UDMA/133 abar m8192@0xf0870000 port 0xf0870100 irq 21
[    1.692486] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[    1.692927] ata2.00: configured for UDMA/33
[    1.693662] scsi 1:0:0:0: CD-ROM            VBOX     CD-ROM           1.0  PQ: 0 ANSI: 5
[    1.729146] tsc: Refined TSC clocksource calibration: 2194.391 MHz
[    1.729156] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa180134b5, max_idle_ns: 440795202126 ns
[    1.848540] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.848681] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[    1.848683] ata3.00: 125829120 sectors, multi 128: LBA48 NCQ (depth 31/32)
[    1.848803] ata3.00: configured for UDMA/133
[    1.848925] scsi 2:0:0:0: Direct-Access     ATA      VBOX HARDDISK    1.0  PQ: 0 ANSI: 5
[    1.857316] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    1.891082] sd 2:0:0:0: [sda] 125829120 512-byte logical blocks: (64.4 GB/60.0 GiB)
[    1.891091] sd 2:0:0:0: [sda] Write Protect is off
[    1.891093] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.891106] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.916762] e1000 0000:00:08.0 eth1: (PCI:33MHz:32-bit) 08:00:27:8b:06:eb
[    1.916765] e1000 0000:00:08.0 eth1: Intel(R) PRO/1000 Network Connection
[    2.002074] usb 1-1: New USB device found, idVendor=80ee, idProduct=0021
[    2.002076] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    2.002077] usb 1-1: Product: USB Tablet
[    2.002078] usb 1-1: Manufacturer: VirtualBox
[    2.007891] hidraw: raw HID events driver (C) Jiri Kosina
[    2.010287] usbcore: registered new interface driver usbhid
[    2.010288] usbhid: USB HID core driver
[    2.011147] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:0c.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0001/input/input3
[    2.016159] hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:0c.0-1/input0
[    2.032138]  sda: sda1 sda2 < sda5 >
[    2.032503] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.312091] e1000 0000:00:09.0 eth2: (PCI:33MHz:32-bit) 08:00:27:54:a6:91
[    2.312094] e1000 0000:00:09.0 eth2: Intel(R) PRO/1000 Network Connection
[    2.328776] sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
[    2.328778] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.329216] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.320874] floppy0: no floppy controllers found
[    4.428397] PM: Starting manual resume from disk
[    4.428399] PM: Hibernation image partition 8:5 present
[    4.428400] PM: Looking for hibernation image.
[    4.428950] PM: Image not found (code -22)
[    4.428952] PM: Hibernation image not present or could not be loaded.
[    6.210302] random: crng init done
[    9.564582] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   15.018167] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.520951] systemd[1]: systemd 235 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[   15.520995] systemd[1]: Detected virtualization oracle.
[   15.520999] systemd[1]: Detected architecture x86-64.
[   15.577999] systemd[1]: Set hostname to <t3cno31l1m>.
[   20.877481] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   20.877634] systemd[1]: Created slice System Slice.
[   20.877674] systemd[1]: Listening on LVM2 metadata daemon socket.
[   20.877702] systemd[1]: Listening on Journal Socket (/dev/log).
[   20.877717] systemd[1]: Listening on LVM2 poll daemon socket.
[   20.877739] systemd[1]: Listening on udev Control Socket.
[   20.877756] systemd[1]: Listening on Syslog Socket.
[   20.877773] systemd[1]: Listening on udev Kernel Socket.
[   20.877780] systemd[1]: Reached target Remote File Systems.
[   20.877883] systemd[1]: Created slice system-getty.slice.
[   24.641920] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   25.164815] systemd-journald[249]: Received request to flush runtime journal from PID 1
[   32.138023] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   32.138046] ACPI: Power Button [PWRF]
[   32.138153] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input5
[   32.138164] ACPI: Sleep Button [SLPF]
[   32.612891] ACPI: AC Adapter [AC] (on-line)
[   32.627695] ACPI: Battery Slot [BAT0] (battery present)
[   32.693945] vboxguest: loading out-of-tree module taints kernel.
[   32.697547] vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
[   32.697638] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input6
[   32.697723] vboxguest: misc device minor 58, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
[   32.697724] vboxguest: Successfully loaded version 5.1.28 (interface 0x00010004)
[   33.101962] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   33.102218] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input7
[   33.128350] [drm] VRAM 01000000
[   33.128521] [TTM] Zone  kernel: Available graphics memory: 2025156 kiB
[   33.128523] [TTM] Initializing pool allocator
[   33.128528] [TTM] Initializing DMA pool allocator
[   33.128928] fbcon: vboxdrmfb (fb0) is primary device
[   33.147857] Console: switching to colour frame buffer device 100x37
[   33.152648] vboxvideo 0000:00:02.0: fb0: vboxdrmfb frame buffer device
[   33.168611] [drm] Initialized vboxvideo 1.0.0 20130823 for 0000:00:02.0 on minor 0
[   33.596775] sr 1:0:0:0: Attached scsi generic sg0 type 5
[   33.596893] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   34.222571] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   34.378726] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 10737418240 ms ovfl timer
[   34.378727] RAPL PMU: hw unit of domain pp0-core 2^-0 Joules
[   34.378728] RAPL PMU: hw unit of domain package 2^-0 Joules
[   34.378729] RAPL PMU: hw unit of domain dram 2^-0 Joules
[   34.378729] RAPL PMU: hw unit of domain pp1-gpu 2^-0 Joules
[   34.672960] ppdev: user-space parallel port driver
[   34.994500] snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
[   36.321625] floppy0: no floppy controllers found
[   36.321725] work still pending
[   36.946116] Adding 2095100k swap on /dev/sda5.  Priority:-1 extents:1 across:2095100k FS
[   49.959004] vboxsf: Successfully loaded version 5.1.28 (interface 0x00010004)
[   68.073999] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   68.075968] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   68.080353] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   68.080674] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   68.082246] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   68.086310] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   68.097761] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[   68.102104] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[   68.109792] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   68.111115] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[   72.045026] VBoxService 5.1.28 r117968 (verbosity: 0) linux.amd64 (Sep 13 2017 11:07:52) release log
               00:00:00.000446 main     Log opened 2017-12-24T20:24:50.503520000Z
[   72.045071] 00:00:00.000548 main     OS Product: Linux
[   72.045098] 00:00:00.000579 main     OS Release: 4.13.0-kali1-amd64
[   72.045123] 00:00:00.000605 main     OS Version: #1 SMP Debian 4.13.4-2kali1 (2017-10-16)
[   72.045156] 00:00:00.000629 main     Executable: /opt/VBoxGuestAdditions-5.1.28/sbin/VBoxService
               00:00:00.000630 main     Process ID: 625
               00:00:00.000630 main     Package type: LINUX_64BITS_GENERIC
[   72.045938] 00:00:00.001413 main     5.1.28 r117968 started. Verbose level = 0
[   72.406601] 00:00:00.361945 automount vbsvcAutoMountWorker: Shared folder 'E_DRIVE' was mounted to '/media/sf_E_DRIVE'
[ 5785.221162] fuse init (API version 7.26)
[ 5963.520829] e1000: eth0 NIC Link is Down
[ 5969.569881] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 5971.585495] e1000: eth2 NIC Link is Down
[ 5974.050061] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 5974.405416] usb 1-2: New USB device found, idVendor=148f, idProduct=2870
[ 5974.405421] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5974.405424] usb 1-2: Product: 802.11 n WLAN
[ 5974.405426] usb 1-2: Manufacturer: Ralink
[ 5974.405429] usb 1-2: SerialNumber: 1.0
[ 5975.549001] usb 1-2: reset high-speed USB device number 3 using xhci_hcd
[ 5975.892564] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected
[ 5975.947931] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0003 detected
[ 5976.041551] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5976.041860] usbcore: registered new interface driver rt2800usb
[ 5976.253113] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5976.253148] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 5976.500878] rt2800usb 1-2:1.0: firmware: direct-loading firmware rt2870.bin
[ 5976.500886] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 5976.891614] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5977.345371] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5977.504732] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5977.761602] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 5979.835933] usb 1-2: USB disconnect, device number 3
[ 5979.876766] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x101c with error -19
[ 5991.875093] e1000: eth2 NIC Link is Down
[ 5997.922035] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 7846.327616] e1000: eth2 NIC Link is Down
[ 7961.573704] usb 1-2: new high-speed USB device number 4 using xhci_hcd
[ 7961.923800] usb 1-2: New USB device found, idVendor=148f, idProduct=2870
[ 7961.923802] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7961.923803] usb 1-2: Product: 802.11 n WLAN
[ 7961.923804] usb 1-2: Manufacturer: Ralink
[ 7961.923805] usb 1-2: SerialNumber: 1.0
[ 7962.234473] usb 1-2: reset high-speed USB device number 4 using xhci_hcd
[ 7962.577000] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected
[ 7962.631918] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0003 detected
[ 7962.636518] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 7962.672484] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7962.672520] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 7962.672563] rt2800usb 1-2:1.0: firmware: direct-loading firmware rt2870.bin
[ 7962.672566] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 7963.115860] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7963.574869] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7963.626301] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7965.613522] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7965.660016] wlan0: authenticate with 1a:5b:0e:10:36:da
[ 7965.701661] wlan0: send auth to 1a:5b:0e:10:36:da (try 1/3)
[ 7966.206951] wlan0: send auth to 1a:5b:0e:10:36:da (try 2/3)
[ 7966.212453] wlan0: authenticated
[ 7966.214174] wlan0: associate with 1a:5b:0e:10:36:da (try 1/3)
[ 7966.219339] wlan0: RX AssocResp from 1a:5b:0e:10:36:da (capab=0x421 status=0 aid=3)
[ 7966.234759] wlan0: associated
[ 7966.234772] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
root@t3cno31l1m:~#


[Elessar]

Ağ adaptörü takılı iken konuk işletim sistemini başlatın.

Konuk işletim sisteminin penceresinde Aygıtlar > USB > Ağ adaptörünü seçin

Ağ adaptörünün konuk işletim sisteminde tanımlı olup olmadığını iwconfig komutuyla kontrol edin.