[ERROR]Cannot access secondary GPU - error: [XORG] (EE)

Başlatan Erdem Gazeloğlu, 19 Aralık 2017 - 14:55:00

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

Erdem Gazeloğlu

Aşağıdaki hatayı alıyorum.

erdem@erdem-H36FF:~$ optirun glxgears
[ 1514.365045] [ERROR]Cannot access secondary GPU - error: [XORG] (EE)

[ 1514.365126] [ERROR]Aborting because fallback start is disabled.


Bumblebee kurulumunu
sudo apt-get install bumblebee bumblebee-nvidia primus linux-headers-generic
bu kodla yaptım

bumblebee.conf dosyamın içeriği
erdem@erdem-H36FF:/etc/bumblebee$ cat bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
# Xorg binary to run
XorgBinary=/usr/lib/xorg/Xorg

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-304
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-304:/usr/lib32/nvidia-304
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-304/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau


xorg.conf.nouveau dosyasının içeriği
erdem@erdem-H36FF:/etc/bumblebee$ cat xorg.conf.nouveau
Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nouveau"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting is needed on Ubuntu 13.04.
    BusID "PCI:01:00:0"

EndSection


xorg.conf.nvidia dosyasının içeriği
erdem@erdem-H36FF:/etc/bumblebee$ cat xorg.conf.nvidia
Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
    BusID "PCI:01:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSection


erdem@erdem-H36FF:/$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
01:00.0 VGA compatible controller: NVIDIA Corporation GT216M [GeForce GT 320M] (rev a2)


erdem@erdem-H36FF:/$ dpkg -l | grep nvidia
ii  bumblebee-nvidia                           3.2.1-10                                     amd64        NVIDIA Optimus support using the proprietary NVIDIA driver
ii  nvidia-304                                 304.135-0ubuntu0.16.04.1                     amd64        NVIDIA legacy binary driver - version 304.135
rc  nvidia-340                                 340.102-0ubuntu0.16.04.2                     amd64        NVIDIA binary driver - version 340.102
ii  nvidia-opencl-icd-304                      304.135-0ubuntu0.16.04.1                     amd64        NVIDIA OpenCL ICD
ii  nvidia-settings                            361.42-0ubuntu1                              amd64        Tool for configuring the NVIDIA graphics driver


Lütfen yardım edin haftalardın uğraşıyorum.Şimdiden teşekkürler.

mendirec


Erdem Gazeloğlu

Şimdi denedim işe yaradı  ;D. Anladığım kadarıyla intel nvidia arasında geçiş yapmak
için oturum kapatıp açmam gerekiyomuş.Biraz can sıkıcı bi durum bumblebee çalıştırmanın bir
yolu yok mu? Yada Prime kullanarak, oturum açıp kapama işlemini yapmadan intel ile nvidia arasında
geçiş yapmanın yolu var mı?

mendirec

[mention=634729]@Erdem Gazeloğlu[/mention] Prime yönteminide malesef öyle bir yöntem yok. Sadece Bumblebee ile yapabilirsin.