kablolu internet sorunu

[alpha_]

 parrot os usb önyükleme yaptım internet wireless gorunuyor ethernet bağlı modemdende ışık var forumdaki konularda yardımcı olmadı Connection managerde wired yaza default yer eth gordu ping komutları hala çalışmıyor telefondan yazdım

Kod Seç Genişlet



$uname -a

Linux parrot 4.13.0-parrot4-amd64 #1 SMP Parrot 4.13.4-2parrot0 (2017-10-17) x86_64 GNU/Linux



lspci 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller
(rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller
(rev 01) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1
(rev 01) 00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2
(rev 01) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1
(rev 01) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2
(rev 01) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3
(rev 01) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4
(rev 01) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge
(rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge
(rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller
(rev 01) 00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode]
(rev 01) 01:00.0 Ethernet controller: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet (rev c0)




$lsusb

Bus 005 Device 005: ID 058f:6364 Alcor Micro Corp. AU6477 Card Reader Controller
Bus 005 Device 003: ID abcd:1234 Unknown
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 192f:0916 Avago Technologies, Pte.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0c45:7603 Microdia
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

$rfkill

list Can't open RFKILL control device: No such file or directory

$sudo lshw -C

network *-network description: Ethernet interface product: AR8151 v2.0
Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:01:00.0
logical name: eth0 version: c0 serial: 20:cf:30:f2:a2:30
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd
autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI ip=192.168.2.88 latency=0 link=no multicast=yes port=twisted pair resources: irq:25 memory:febc0000-febfffff ioport:ec00(size=128)

$ifconfig

eth0: flags=4099 mtu 1500 inet 192.168.2.88
netmask 255.255.255.0 broadcast 192.168.2.255
ether 20:cf:30:f2:a2:30 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped
0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000
(Local Loopback) RX packets 872 bytes 82726 (80.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0 TX packets 872 bytes 82726 (80.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

$iwconfig

eth0 no wireless extensions. lo no wireless extensions.

$iw list scanning

Usage: iw [options] command Options: --debug enable netlink debugging
--version show version (4.9) Commands: help [command] Print usage for all or
a specific command, e.g. "help wowlan" or "help wowlan enable".
event [-t|-r] [-f] Monitor events from the kernel. -t - print timestamp
-r - print relative timstamp -f - print full frame for auth/assoc etc. features
commands list all known commands and their decimal & hex value phy list
List all wireless devices and their capabilities. phy info Show capabilities for
the specified wireless device. phy channels Show available channels. dev List
all network interfaces for wireless hardware. dev info Show information for
this interface. dev del Remove this virtual interface dev interface add type
[mesh_id ] [4addr on|off] [flags *] [addr ] phy interface add type [mesh_id ]
[4addr on|off] [flags *] [addr ] Add a new virtual interface with the given
configuration. Valid interface types are: managed, ibss, monitor, mesh, wds.
The flags are only used for monitor interfaces, valid flags are: none: no special flags
fcsfail: show frames with FCS errors control: show control frames
otherbss: show frames from other BSSes cook: use cooked mode
active: use active mode (ACK incoming unicast packets)
mumimo-groupid : use MUMIMO according to a group id mumimo-follow-mac : use MUMIMO according to
a MAC address The mesh_id is used only for mesh mode. dev ibss join [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz] [fixed-freq] [] [beacon-
interval ] [basic-rates ] [mcast-rate ] [key d:0:abcde] Join the IBSS cell with the given SSID, if
it doesn't exist create it on the given frequency. When fixed frequency is requested, don't
join/create a cell on a different frequency. When a fixed BSSID is requested use that BSSID
and do not adopt another cell's BSSID even if it has higher TSF and the same SSID. If an
IBSS is created, create it with the specified basic-rates, multicast-rate and beacon-interval.
dev ibss leave Leave the current IBSS cell. dev station dump [-v] List all stations known, e.g.
the AP on managed interfaces dev station set mesh_power_mode Set link-specific mesh
power mode for this station dev station set vlan Set an AP VLAN for this station. dev station
set plink_action Set mesh peer link action for this station (peer). dev station del [subtype ]
[reason-code ] Remove the given station entry (use with caution!) Example subtype values:
0xA (disassociation), 0xC (deauthentication) dev station get Get information for a specific
station. dev survey dump List all gathered channel survey data dev ocb leave Leave the OCB
mode network. dev ocb join <5MHz|10MHz> Join the OCB mode network. dev mesh leave
Leave a mesh. dev mesh join [[freq ] [basic-rates ]], [mcast-rate ] [beacon-interval ] [dtim-
period ] [vendor_sync on|off] [=]* Join a mesh with the given mesh ID with frequency, basic-
rates, mcast-rate and mesh parameters. Basic-rates are applied only if frequency is
provided. dev mpath dump List known mesh paths. dev mpath set next_hop Set an existing
mesh path's next hop. dev mpath new next_hop Create a new mesh path (instead of relying
on automatic discovery). dev mpath del Remove the mesh path to the given node. dev
mpath get Get information on mesh path to the given node. dev mpp dump List known mesh
proxy paths. dev mpp get Get information on mesh proxy path to the given node. dev scan [-
u] [freq *] [ies ] [meshid ] [lowpri,flush,ap-force] [randomise[=/]] [ssid *|passive] Scan on the
given frequencies and probe for the given SSIDs (or wildcard if not given) unless passive
scanning is requested. If -u is specified print unknown data in the scan results. Specified
(vendor) IEs must be well-formed. dev scan sched_stop Stop an ongoing scheduled scan.
dev scan sched_start [interval | scan_plans [*] ] [delay ] [freqs +] [matches [ssid ]+]] [active
[ssid ]+|passive] [randomise[=/]] Start a scheduled scan at the specified interval on the given
frequencies with probing for the given SSIDs (or wildcard if not given) unless passive
scanning is requested. If matches are specified, only matching results will be returned. dev
scan abort Abort ongoing scan dev scan trigger [freq *] [ies ] [meshid ] [lowpri,flush,ap-force]
[randomise[=/]] [ssid *|passive] Trigger a scan on the given frequencies with probing for the
given SSIDs (or wildcard if not given) unless passive scanning is requested. dev scan dump
[-u] Dump the current scan results. If -u is specified, print unknown data in scan results. phy
reg get Print out the devices' current regulatory domain information. reg get Print out the
kernel's current regulatory domain information. reg set Notify the kernel about the current
regulatory domain. dev auth [key 0:abcde d:1:6162636465] Authenticate with the given
network. dev connect [-w] [] [] [key 0:abcde d:1:6162636465] Join the network with the given
SSID (and frequency, BSSID). With -w, wait for the connect to finish or fail. dev disconnect
Disconnect from the current network. dev link Print information about the current link, if any.
dev offchannel Leave operating channel and go to the given channel for a while. dev cqm
rssi [] Set connection quality monitor RSSI threshold. phy wowlan show Show WoWLAN
status. phy wowlan disable Disable WoWLAN. phy wowlan enable [any] [disconnect] [magic-
packet] [gtk-rekey-failure] [eap-identity-request] [4way-handshake] [rfkill-release] [net-
detect [interval | scan_plans [*] ] [delay ] [freqs +] [matches [ssid ]+]] [active [ssid ]+|passive]
[randomise[=/]]] [tcp ] [patterns [offset1+] ...] Enable WoWLAN with the given triggers. Each
pattern is given as a bytestring with '-' in places where any byte may be present, e.g.
00:11:22:-:44 will match 00:11:22:33:44 and 00:11:22:33:ff:44 etc. Offset and pattern should
be separated by '+', e.g. 18+43:34:00:12 will match '43:34:00:12' after 18 bytes of offset in Rx
packet. The TCP configuration file contains: source=ip[:port] dest=ip:port@mac data=
data.interval=seconds [wake=] [data.seq=len,offset[,start]] [data.tok=len,offset,] Net-detect
configuration example: iw phy0 wowlan enable net-detect interval 5000 delay 30 freqs 2412
2422 matches ssid foo ssid bar phy coalesce show Show coalesce status. phy coalesce
disable Disable coalesce. phy coalesce enable Enable coalesce with given configuration.
The configuration file contains coalesce rules: delay= condition= patterns=<[offset1+],
<[offset2+],...> delay= condition= patterns=<[offset1+],<[offset2+],...> ... delay: maximum
coalescing delay in msec. condition: 1/0 i.e. 'not match'/'match' the patterns patterns: each
pattern is given as a bytestring with '-' in places where any byte may be present, e.g.
00:11:22:-:44 will match 00:11:22:33:44 and 00:11:22:33:ff:44 etc. Offset and pattern should
be separated by '+', e.g. 18+43:34:00:12 will match '43:34:00:12' after 18 bytes of offset in Rx
packet. dev roc start wdev p2p stop wdev p2p start dev vendor recvbin dev vendor recv dev
vendor send phy set antenna | all | Set a bitmap of allowed antennas to use for TX and RX.
The driver may reject antenna configurations it cannot support. dev set txpower [] Specify
transmit power level and setting type. phy set txpower [] Specify transmit power level and
setting type. phy set distance Enable ACK timeout estimation algorithm (dynack) or set
appropriate coverage class for given link distance in meters. To disable dynack set valid
value for coverage class. Valid values: 0 - 114750 phy set coverage Set coverage class (1
for every 3 usec of air propagation time). Valid values: 0 - 255. phy set netns { | name } Put
this wireless device into a different network namespace: - change network namespace by
process id -change network namespace by name from /run/netns or by absolute path (man
ip-netns) phy set retry [short ] [long ] Set retry limit. phy set rts Set rts threshold. phy set frag
Set fragmentation threshold. dev set channel [HT20|HT40+|HT40-] phy set channel
[HT20|HT40+|HT40-] dev set freq [HT20|HT40+|HT40-] dev set freq [20|40|80|80+80|160] [ ] [
] phy set freq [HT20|HT40+|HT40-] Set frequency/channel the hardware is using, including
HT configuration. phy set name Rename this wireless device. dev set mcast_rate Set the
multicast bitrate. dev set peer Set interface WDS peer. dev set noack_map Set the NoAck
map for the TIDs. (0x0009 = BE, 0x0006 = BK, 0x0030 = VI, 0x00C0 = VO) dev set 4addr Set
interface 4addr (WDS) mode. dev set type Set interface type/mode. Valid interface types are:
managed, ibss, monitor, mesh, wds. dev set meshid dev set monitor * Set monitor flags.
Valid flags are: none: no special flags fcsfail: show frames with FCS errors control: show
control frames otherbss: show frames from other BSSes cook: use cooked mode active: use
active mode (ACK incoming unicast packets) mumimo-groupid : use MUMIMO according to
a group id mumimo-follow-mac : use MUMIMO according to a MAC address dev set
mesh_param = [=]* Set mesh parameter (run command without any to see available ones).
dev set power_save Set power save state to on or off. dev set bitrates [legacy-<2.4|5> *] [ht-
mcs-<2.4|5> *] [vht-mcs-<2.4|5> *] [sgi-2.4|lgi-2.4] [sgi-5|lgi-5] Sets up the specified rate
masks. Not passing any arguments would clear the existing mask (if any). dev get
mesh_param [] Retrieve mesh parameter (run command without any to see available ones).
dev get power_save Retrieve power save state. Commands that use the netdev ('dev') can
also be given the 'wdev' instead to identify the device. You can omit the 'phy' or 'dev' if the
identification is unique, e.g. "iw wlan0 info" or "iw phy0 info". (Don't when scripting.) Do NOT
screenscrape this tool, we don't consider its output stable.

$lsmod

Module Size Used by cfg80211 598016 0 rfkill 24576 2 cfg80211 cpufreq_userspace 16384 0 cpufreq_powersave 16384 0 cpufreq_conservative 16384 0 joydev 20480 0 sg 32768 0 coretemp 16384 0 kvm_intel 196608 0 snd_hda_codec_realtek 94208 1 kvm 577536 1 kvm_intel iTCO_wdt 16384 0 iTCO_vendor_support 16384 1 iTCO_wdt ppdev 20480 0 snd_hda_codec_generic 69632 1 snd_hda_codec_realtek snd_hda_intel 36864 3 snd_hda_codec 126976 3 snd_hda_intel,snd_hda_codec_generic,snd_hda_codec_realtek snd_hda_core 77824 4 snd_hda_intel,snd_hda_codec,snd_hda_codec_generic,snd_hda_codec_realtek snd_hwdep 16384 1 snd_hda_codec lpc_ich 24576 0 snd_pcm 98304 3 snd_hda_intel,snd_hda_codec,snd_hda_core mfd_core 16384 1 lpc_ich snd_timer 32768 1 snd_pcm irqbypass 16384 1 kvm serio_raw 16384 0 snd 77824 13 snd_hda_intel,snd_hwdep,snd_hda_codec,snd_timer,snd_hda_codec_generic,snd_hda_codec_realtek,snd_pcm pcspkr 16384 0 parport_pc 28672 0 rng_core 16384 0 soundcore 16384 1 snd parport 49152 2 parport_pc,ppdev asus_atk0110 20480 0 shpchp 36864 0 evdev 24576 9 acpi_cpufreq 20480 1 binfmt_misc 20480 1 ip_tables 24576 0 x_tables 36864 1 ip_tables autofs4 40960 2 squashfs 53248 1 loop 28672 2 overlay 65536 1 nls_ascii 16384 1 nls_cp437 20480 1 vfat 20480 1 fat 65536 1 vfat sd_mod 49152 2 uas 24576 0 usb_storage 69632 2 uas hid_generic 16384 0 usbhid 49152 0 hid 118784 2 hid_generic,usbhid ata_generic 16384 0 ata_piix 36864 0 psmouse 143360 0 libata 237568 2 ata_piix,ata_generic scsi_mod 212992 5 sd_mod,usb_storage,libata,uas,sg atl1c 49152 0 i915 1552384 3 video 40960 1 i915 button 16384 1 i915 i2c_algo_bit 16384 1 i915 ehci_pci 16384 0 uhci_hcd 45056 0 ehci_hcd 81920 1 ehci_pci usbcore 245760 6 usbhid,usb_storage,ehci_hcd,uhci_hcd,uas,ehci_pci usb_common 16384 1 usbcore drm_kms_helper 151552 1 i915 drm 348160 5 i915,drm_kms_helper

$dmesg

dmesg: read kernel buffer failed: Operation not permitted

$sudo dmesg

[ 0.000000] random: get_random_bytes called from start_kernel+0x3d/0x456 with crng_init=0
[ 0.000000] Linux version 4.13.0-parrot4-amd64 (parrot-devel@lists.parrotsec.org) (gcc version 6.4.0 20171010 (Debian 6.4.0-8)) #1 SMP Parrot 4.13.4-2parrot0 (2017-10-17)
[ 0.000000] Command line: BOOT_IMAGE=/live/vmlinuz boot=live hostname=parrot locales=en_US.UTF-8 keyboard-layouts=us quiet splash initrd=/live/initrd.img
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [
0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007dd7ffff] usable [
0.000000] BIOS-e820: [mem 0x000000007dd80000-0x000000007dd8dfff] ACPI data [
0.000000] BIOS-e820: [mem 0x000000007dd8e000-0x000000007ddcffff] ACPI NVS [
0.000000] BIOS-e820: [mem 0x000000007ddd0000-0x000000007fffffff] reserved [
0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [
0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000]
NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000]
SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer System Product
Name/P5G41T-M LX, BIOS 1101 06/08/2012 [ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000]
e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7dd80
max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR
fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF
uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [
0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000]
MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07DE00000 mask FFFE00000 uncachable [ 0.000000] 2 base 07E000000
mask FFE000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5
disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration
[0-7]: WB WC UC- UC WB WC UC-WT [ 0.000000] found SMP MP-table at [mem 0x000ff780-
0x000ff78f] mapped at [ffff922dc00ff780] [ 0.000000] Base memory trampoline at
[ffff922dc0099000] 99000 size 24576 [ 0.000000] BRK [0x1dd57000, 0x1dd57fff] PGTABLE [
0.000000] BRK [0x1dd58000, 0x1dd58fff] PGTABLE [ 0.000000] BRK [0x1dd59000,
0x1dd59fff] PGTABLE [ 0.000000] BRK [0x1dd5a000, 0x1dd5afff] PGTABLE [ 0.000000] BRK
[0x1dd5b000, 0x1dd5bfff] PGTABLE [ 0.000000] BRK [0x1dd5c000, 0x1dd5cfff] PGTABLE [
0.000000] RAMDISK: [mem 0x7b92a000-0x7dd7ffff] [ 0.000000] ACPI: Early table checksum
verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FB760 000024 (v02 ACPIAM) [
0.000000] ACPI: XSDT 0x000000007DD80100 000064 (v01 Datate Diamond1 06001208
MSFT 00000097) [ 0.000000] ACPI: FACP 0x000000007DD80290 0000F4 (v03 A_M_I_
OEMFACP 06001208 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x000000007DD80440
00894E (v01 A1527 A1527000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS
0x000000007DD8E000 000040 [ 0.000000] ACPI: FACS 0x000000007DD8E000 000040 [
0.000000] ACPI: APIC 0x000000007DD80390 00006C (v01 A_M_I_ OEMAPIC 06001208
MSFT 00000097) [ 0.000000] ACPI: MCFG 0x000000007DD80400 00003C (v01 A_M_I_
OEMMCFG 06001208 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x000000007DD8E040
000089 (v01 A_M_I_ AMI_OEM 06001208 MSFT 00000097) [ 0.000000] ACPI: HPET
0x000000007DD88D90 000038 (v01 A_M_I_ OEMHPET 06001208 MSFT 00000097) [
0.000000] ACPI: GSCI 0x000000007DD8E0D0 002024 (v01 A_M_I_ GMCHSCI 06001208
MSFT 00000097) [ 0.000000] ACPI: SSDT 0x000000007DD90610 000363 (v01 DpgPmm
CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: SLIC 0x000000007DD88DD0 000176
(v01 Datate Diamond1 06001208 MSFT 00000097) [ 0.000000] ACPI: Local APIC address
0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem
0x0000000000000000-0x000000007dd7ffff] [ 0.000000] NODE_DATA(0) allocated [mem
0x7b925000-0x7b929fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem
0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem
0x0000000001000000-0x000000007dd7ffff] [ 0.000000] Normal empty [ 0.000000] Device
empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [
0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0:
[mem 0x0000000000100000-0x000000007dd7ffff] [ 0.000000] Initmem setup node 0 [mem
0x0000000000001000-0x000000007dd7ffff] [ 0.000000] On node 0 totalpages: 515358 [
0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7990 pages used
for memmap [ 0.000000] DMA32 zone: 511360 pages, LIFO batch:31 [ 0.000000] Reserving
Intel graphics memory at 0x000000007e000000-0x000000007fffffff [ 0.000000] ACPI: PM-
Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000]
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI:
INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0
bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI:
IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [
0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4
CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-
0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [
0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff] [ 0.000000] PM:
Registered nosave memory: [mem 0x000e4000-0x000fffff] [ 0.000000] e820: [mem
0x80000000-0xfedfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel
on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:

0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.000000] setup_percpu: NR_CPUS:512
nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 38
pages/cpu @ffff922e3b600000 s115224 r8192 d32232 u524288 [ 0.000000] pcpu-alloc:
s115224 r8192 d32232 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [
0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 507283 [
0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line:
BOOT_IMAGE=/live/vmlinuz boot=live hostname=parrot locales=en_US.UTF-8 keyboard-
layouts=us quiet splash initrd=/live/initrd.img [ 0.000000] PID hash table entries: 4096
(order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [
0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory:
1974932K/2061432K available (6587K kernel code, 1153K rwdata, 2964K rodata, 1472K init,
696K bss, 86500K reserved, 0K cma-reserved) [ 0.000000] ftrace: allocating 28602 entries in
112 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs
from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for
rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 33024, nr_irqs: 456, preallocated
irqs: 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [
0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:
133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC
calibration using PIT [ 0.003333] tsc: Detected 2934.371 MHz processor [ 0.003333]
Calibrating delay loop (skipped), value calculated using timer frequency.. 5871.27
BogoMIPS (lpj=9781236) [ 0.003333] pid_max: default: 32768 minimum: 301 [ 0.003333]
ACPI: Core revision 20170531 [ 0.009889] ACPI: 2 ACPI AML tables successfully acquired
and loaded [ 0.009939] Security Framework initialized [ 0.009941] Yama: disabled by
default; enable with sysctl kernel.yama.* [ 0.009947] AppArmor: AppArmor disabled by boot
time parameter [ 0.010678] Dentry cache hash table entries: 262144 (order: 9, 2097152
bytes) [ 0.011221] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [
0.011253] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.011272]
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.011532] CPU:
Physical Processor ID: 0 [ 0.011533] CPU: Processor Core ID: 0 [ 0.011534] mce: CPU
supports 6 MCE banks [ 0.011540] CPU0: Thermal monitoring enabled (TM2) [ 0.011543]
process: using mwait in idle threads [ 0.011547] Last level iTLB entries: 4KB 128, 2MB 4,
4MB 4 [ 0.011547] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.011657]
Freeing SMP alternatives memory: 28K [ 0.013436] smpboot: Max logical packages: 2 [
0.013807] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.049999] smpboot:
CPU0: Intel Pentium(R) Dual-Core CPU E6500 @ 2.93GHz (family: 0x6, model: 0x17,

stepping: 0xa) [ 0.049999] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.

[ 0.049999] ... version: 2 [ 0.049999] ... bit width: 40 [ 0.049999] ... generic registers: 2 [
0.049999] ... value mask: 000000ffffffffff [ 0.049999] ... max period: 000000007fffffff [
0.049999] ... fixed-purpose events: 3 [ 0.049999] ... event mask: 0000000700000003 [
0.049999] Hierarchical SRCU implementation. [ 0.049999] smp: Bringing up secondary
CPUs ... [ 0.049999] x86: Booting SMP configuration: [ 0.049999] .... node #0, CPUs: #1 [
0.003333] calibrate_delay_direct() dropping max bogoMips estimate 3 = 45642325 [
0.132023] smp: Brought up 1 node, 2 CPUs [ 0.132023] smpboot: Total of 2 processors
activated (11741.09 BogoMIPS) [ 0.132023] NMI watchdog: enabled on all CPUs,
permanently consumes one hw-PMU counter. [ 0.133369] devtmpfs: initialized [ 0.133399]
x86/mm: Memory block size: 128MB [ 0.133712] PM: Registering ACPI NVS region [mem
0x7dd8e000-0x7ddcffff] (270336 bytes) [ 0.133758] clocksource: jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.133765] futex hash table
entries: 1024 (order: 4, 65536 bytes) [ 0.133816] pinctrl core: initialized pinctrl subsystem [
0.133909] NET: Registered protocol family 16 [ 0.134072] cpuidle: using governor ladder [
0.134072] cpuidle: using governor menu [ 0.134072] PCCT header not found. [ 0.134072]
ACPI: bus type PCI registered [ 0.134072] acpiphp: ACPI Hot Plug PCI Controller Driver
version: 0.5 [ 0.134072] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-
0xf3ffffff] (base 0xf0000000) [ 0.134072] PCI: not using MMCONFIG [ 0.134072] PCI: Using
configuration type 1 for base access [ 0.134075] HugeTLB registered 2.00 MiB page size,
pre-allocated 0 pages [ 0.134075] ACPI: Added _OSI(Module Device) [ 0.134075] ACPI:
Added _OSI(Processor Device) [ 0.134075] ACPI: Added _OSI(3.0 _SCP Extensions) [
0.134075] ACPI: Added _OSI(Processor Aggregator Device) [ 0.134075] ACPI: Executed 1
blocks of module-level executable AML code [ 0.136782] ACPI: Dynamic OEM Table Load: [
0.136788] ACPI: SSDT 0xFFFF922E3865E000 00050E (v01 DpgPmm P001Ist 00000011
INTL 20060113) [ 0.137269] ACPI: Interpreter enabled [ 0.137286] ACPI: (supports S0 S1 S3
S4 S5) [ 0.137287] ACPI: Using IOAPIC for interrupt routing [ 0.137312] PCI: MMCONFIG for
domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.140007] PCI:
MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources [
0.140007] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and
report a bug [ 0.143884] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.143889]
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [
0.143892] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.143900]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially
covers this bridge [ 0.144098] PCI host bridge to bus 0000:00 [ 0.144100] pci_bus 0000:00:
root bus resource [io 0x0000-0x0cf7 window] [ 0.144101] pci_bus 0000:00: root bus
resource [io 0x0d00-0xffff window] [ 0.144103] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window] [ 0.144104] pci_bus 0000:00: root bus resource [mem
0x000d0000-0x000dffff window] [ 0.144105] pci_bus 0000:00: root bus resource [mem
0x7de00000-0xefffffff window] [ 0.144106] pci_bus 0000:00: root bus resource [mem
0xf4000000-0xffffffff window] [ 0.144108] pci_bus 0000:00: root bus resource [bus 00-ff] [
0.144115] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000 [ 0.144136] DMAR: Forcing
write-buffer flush capability [ 0.144136] DMAR: Disabling IOMMU for graphics on this
chipset [ 0.144201] pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000 [ 0.144210] pci
0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit] [ 0.144215] pci 0000:00:02.0: reg
0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.144218] pci 0000:00:02.0: reg 0x20: [io
0xdc00-0xdc07] [ 0.144316] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [
0.144333] pci 0000:00:1b.0: reg 0x10: [mem 0xfeaf8000-0xfeafbfff 64bit] [ 0.144391] pci
0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.144462] pci 0000:00:1c.0:
[8086:27d0] type 01 class 0x060400 [ 0.144519] pci 0000:00:1c.0: PME# supported from D0
D3hot D3cold [ 0.144594] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 [ 0.144654]
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.144730] pci 0000:00:1d.0:
[8086:27c8] type 00 class 0x0c0300 [ 0.144765] pci 0000:00:1d.0: reg 0x20: [io 0xd400-
0xd41f] [ 0.144848] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.144883] pci
0000:00:1d.1: reg 0x20: [io 0xd480-0xd49f] [ 0.144964] pci 0000:00:1d.2: [8086:27ca] type
00 class 0x0c0300 [ 0.144998] pci 0000:00:1d.2: reg 0x20: [io 0xd800-0xd81f] [ 0.145079]
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.145113] pci 0000:00:1d.3: reg
0x20: [io 0xd880-0xd89f] [ 0.145199] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [
0.145216] pci 0000:00:1d.7: reg 0x10: [mem 0xfeaf7c00-0xfeaf7fff] [ 0.145280] pci
0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.145347] pci 0000:00:1e.0:
[8086:244e] type 01 class 0x060401 [ 0.145448] pci 0000:00:1f.0: [8086:27b8] type 00 class
0x060100 [ 0.145518] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6
ACPI/GPIO/TCO [ 0.145521] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6
GPIO [ 0.145524] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [
0.145606] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a [ 0.145621] pci0000:00:1f.1:
reg 0x10: [io 0x0000-0x0007] [ 0.145628] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] [
0.145635] pci 0000:00:1f.1: reg 0x18: [io 0x08f0-0x08f7] [ 0.145642] pci 0000:00:1f.1: reg
0x1c: [io 0x08f8-0x08fb] [ 0.145649] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf] [ 0.145664]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.145665] pci 0000:00:1f.1:
legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.145666] pci 0000:00:1f.1: legacy IDE quirk: reg
0x18: [io 0x0170-0x0177] [ 0.145667] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io
0x0376] [ 0.145734] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f [ 0.145746] pci
0000:00:1f.2: reg 0x10: [io 0xd080-0xd087] [ 0.145752] pci 0000:00:1f.2: reg 0x14: [io
0xd000-0xd003] [ 0.145758] pci 0000:00:1f.2: reg 0x18: [io 0xcc00-0xcc07] [ 0.145763] pci
0000:00:1f.2: reg 0x1c: [io 0xc880-0xc883] [ 0.145769] pci 0000:00:1f.2: reg 0x20: [io
0xc800-0xc80f] [ 0.145797] pci 0000:00:1f.2: PME# supported from D3hot [ 0.145893] pci
0000:00:1c.0: PCI bridge to [bus 02] [ 0.145946] pci 0000:01:00.0: [1969:1083] type 00 class
0x020000 [ 0.145975] pci 0000:01:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit] [
0.145985] pci 0000:01:00.0: reg 0x18: [io 0xec00-0xec7f] [ 0.146083] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.156687] pci 0000:00:1c.1: PCI bridge to [bus 01] [ 0.156691] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.156695] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.156779] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.156788] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.156791] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.156793] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.156795] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.156798] pci 0000:00:1e.0: bridge window [mem 0x7de00000-0xefffffff window] (subtractive decode) [ 0.156800] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xffffffff window] (subtractive decode) [ 0.157391] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 12 14 15) [ 0.157441] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12 14 15) [ 0.157490] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12 14 15) [ 0.157539] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12 14 15) [ 0.157587] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.157637] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 12 14 15) [
0.157685] ACPI: PCI Interrupt Link [LNKG] (IRQs *11) [ 0.157732] ACPI: PCI Interrupt Link
[LNKH] (IRQs 3 4 5 *6 7 10 12 14 15) [ 0.157781] ACPI: Enabled 3 GPEs in block 00 to 1F [
0.157853] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.157853] pci
0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [
0.157853] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.157853] vgaarb: loaded [
0.157853] EDAC MC: Ver: 3.0.0 [ 0.160025] PCI: Using ACPI for IRQ routing [ 0.161188] PCI:
pci_cache_line_size set to 64 bytes [ 0.161217] Expanded resource Reserved due to conflict
with PCI Bus 0000:00 [ 0.161218] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [
0.161220] e820: reserve RAM buffer [mem 0x7dd80000-0x7fffffff] [ 0.161318] HPET: 3
timers in total, 0 timers will be used for per-cpu timer [ 0.161318] hpet0: at MMIO
0xfed00000, IRQs 2, 8, 0 [ 0.161318] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [
0.163354] clocksource: Switched to clocksource hpet [ 0.174215] VFS: Disk quotas
dquot_6.6.0 [ 0.174244] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [
0.174340] pnp: PnP ACPI init [ 0.174429] system 00:00: [mem 0xfed14000-0xfed19fff] has
been reserved [ 0.174433] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [
0.174502] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.174776] pnp
00:02: [dma 3] [ 0.174874] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active) [
0.174927] system 00:03: [io 0x0290-0x0297] has been reserved [ 0.174929] system 00:03:
Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.175048] system 00:04: [io 0x0400-
0x041f] has been reserved [ 0.175049] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.175051] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.175052] system 00:04:
[io 0x0480-0x04bf] has been reserved [ 0.175054] system 00:04: [mem 0xfed1c000-
0xfed1ffff] has been reserved [ 0.175055] system 00:04: [mem 0xfed20000-0xfed8ffff] has
been reserved [ 0.175058] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [
0.175153] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved [ 0.175155] system
00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.175334] pnp 00:06: [dma 0
disabled] [ 0.175385] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [
0.175491] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.175492]
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.175495] system 00:07:
Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.175574] system 00:08: [mem
0xf0000000-0xf3ffffff] has been reserved [ 0.175577] system 00:08: Plug and Play ACPI
device, IDs PNP0c02 (active) [ 0.175723] system 00:09: [mem 0x00000000-0x0009ffff] could
not be reserved [ 0.175725] system 00:09: [mem 0x000c0000-0x000cffff] could not be
reserved [ 0.175726] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [
0.175728] system 00:09: [mem 0x00100000-0x7ddfffff] could not be reserved [ 0.175729]
system 00:09: [mem 0xf0000000-0xffffffff] could not be reserved [ 0.175732] system 00:09:
Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.175841] pnp: PnP ACPI: found 10
devices [ 0.182061] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns:
2085701024 ns [ 0.182075] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02]
add_size 1000 [ 0.182078] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff
64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.182080] pci 0000:00:1c.0:
bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.182086] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus
01] add_size 200000 add_align 100000 [ 0.182099] pci 0000:00:1c.0: BAR 14: assigned
[mem 0x80000000-0x801fffff] [ 0.182103] pci 0000:00:1c.0: BAR 15: assigned [mem
0x80200000-0x803fffff 64bit pref] [ 0.182106] pci 0000:00:1c.1: BAR 15: assigned [mem
0x80400000-0x805fffff 64bit pref] [ 0.182108] pci 0000:00:1c.0: BAR 13: assigned [io
0x1000-0x1fff] [ 0.182110] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.182113] pci
0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.182116] pci 0000:00:1c.0: bridge window
[mem 0x80000000-0x801fffff] [ 0.182118] pci 0000:00:1c.0: bridge window [mem
0x80200000-0x803fffff 64bit pref] [ 0.182123] pci 0000:00:1c.1: PCI bridge to [bus 01] [
0.182124] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.182128] pci 0000:00:1c.1:
bridge window [mem 0xfeb00000-0xfebfffff] [ 0.182130] pci 0000:00:1c.1: bridge window
[mem 0x80400000-0x805fffff 64bit pref] [ 0.182135] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.182143] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.182144] pci_bus
0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.182145] pci_bus 0000:00: resource 6
[mem 0x000a0000-0x000bffff window] [ 0.182146] pci_bus 0000:00: resource 7 [mem
0x000d0000-0x000dffff window] [ 0.182147] pci_bus 0000:00: resource 8 [mem
0x7de00000-0xefffffff window] [ 0.182149] pci_bus 0000:00: resource 9 [mem 0xf4000000-
0xffffffff window] [ 0.182150] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.182151]
pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff] [ 0.182152] pci_bus 0000:02:
resource 2 [mem 0x80200000-0x803fffff 64bit pref] [ 0.182154] pci_bus 0000:01: resource 0
[io 0xe000-0xefff] [ 0.182155] pci_bus 0000:01: resource 1 [mem 0xfeb00000-0xfebfffff] [
0.182156] pci_bus 0000:01: resource 2 [mem 0x80400000-0x805fffff 64bit pref] [ 0.182157]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.182158] pci_bus 0000:03:
resource 5 [io 0x0d00-0xffff window] [ 0.182160] pci_bus 0000:03: resource 6 [mem
0x000a0000-0x000bffff window] [ 0.182161] pci_bus 0000:03: resource 7 [mem
0x000d0000-0x000dffff window] [ 0.182162] pci_bus 0000:03: resource 8 [mem
0x7de00000-0xefffffff window] [ 0.182163] pci_bus 0000:03: resource 9 [mem 0xf4000000-
0xffffffff window] [ 0.182235] NET: Registered protocol family 2 [ 0.182403] TCP established
hash table entries: 16384 (order: 5, 131072 bytes) [ 0.182457] TCP bind hash table entries:
16384 (order: 6, 262144 bytes) [ 0.182547] TCP: Hash tables configured (established 16384
bind 16384) [ 0.182593] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.182606]
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.182654] NET: Registered
protocol family 1 [ 0.182667] pci 0000:00:02.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff] [ 0.183245] pci 0000:01:00.0: [Firmware Bug]: disabling VPD access
(can't determine size of non-standard VPD format) [ 0.183248] PCI: CLS 32 bytes, default 64
[ 0.183293] Unpacking initramfs... [ 0.741549] Freeing initrd memory: 37208K [ 0.742008]
audit: initializing netlink subsys (disabled) [ 0.742085] audit: type=2000
audit(1511950961.742:1): state=initialized audit_enabled=0 res=1 [ 0.742386] workingset:
timestamp_bits=40 max_order=19 bucket_order=0 [ 0.742407] zbud: loaded [ 1.110486] Key
type asymmetric registered [ 1.110486] Asymmetric key parser 'x509' registered [ 1.110502]
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.110530] io scheduler
noop registered [ 1.110531] io scheduler deadline registered [ 1.110540] io scheduler cfq
registered (default) [ 1.110540] io scheduler mq-deadline registered [ 1.110599] pcieport
0000:00:1c.0: enabling device (0104 -> 0107) [ 1.110941] intel_idle: does not run on family 6
model 23 [ 1.111230] GHES: HEST is not enabled! [ 1.111288] Serial: 8250/16550 driver, 4
ports, IRQ sharing enabled [ 1.131825] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud =
115200) is a 16550A [ 1.132130] Linux agpgart interface v0.103 [ 1.132216] AMD IOMMUv2
driver by Joerg Roedel [ 1.132217] AMD IOMMUv2 functionality not available on this system
[ 1.132351] i8042: PNP: No PS/2 controller found. [ 1.132351] i8042: Probing ports directly. [
1.134887] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.134892] serio: i8042 AUX port at
0x60,0x64 irq 12 [ 1.134990] mousedev: PS/2 mouse device common for all mice [
1.135031] rtc_cmos 00:01: RTC can wake from S4 [ 1.135129] rtc_cmos 00:01: rtc core:
registered rtc_cmos as rtc0 [ 1.135148] rtc_cmos 00:01: alarms up to one month, y3k, 114
bytes nvram, hpet irqs [ 1.135166] ledtrig-cpu: registered to indicate activity on CPUs [
1.135454] NET: Registered protocol family 10 [ 1.135654] Segment Routing with IPv6 [
1.135665] mip6: Mobile IPv6 [ 1.135666] NET: Registered protocol family 17 [ 1.135668]
mpls_gso: MPLS GSO support [ 1.135788] microcode: sig=0x1067a, pf=0x1, revision=0xa0b
[ 1.135821] microcode: Microcode Update Driver: v2.2. [ 1.135830] sched_clock: Marking
stable (1135817696, 0)->(1283381614, -147563918) [ 1.135964] registered taskstats
version 1 [ 1.135976] zswap: loaded using pool lzo/zbud [ 1.136025] ima: No TPM chip
found, activating TPM-bypass! (rc=-19) [ 1.136225] rtc_cmos 00:01: setting system clock to
2017-11-29 10:22:42 UTC (1511950962) [ 1.136250] PM: Hibernation image not present or
could not be loaded. [ 1.138536] Freeing unused kernel memory: 1472K [ 1.138537] Write
protecting the kernel read-only data: 12288k [ 1.139261] Freeing unused kernel memory:
1592K [ 1.142054] Freeing unused kernel memory: 1132K [ 1.143353] x86/mm: Checked
W+X mappings: passed, no W+X pages found. [ 1.273027] ACPI: bus type USB registered [
1.273049] usbcore: registered new interface driver usbfs [ 1.273056] usbcore: registered
new interface driver hub [ 1.276132] usbcore: registered new device driver usb [ 1.277303]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.277776] uhci_hcd: USB
Universal Host Controller Interface driver [ 1.277791] ehci-pci: EHCI PCI platform driver [
1.277921] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.277928] uhci_hcd 0000:00:1d.0:
new USB bus registered, assigned bus number 1 [ 1.277935] uhci_hcd 0000:00:1d.0:
detected 2 ports [ 1.277959] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 [ 1.278496]
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.278498] usb usb1:
New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.278499] usb usb1: Product:
UHCI Host Controller [ 1.278500] usb usb1: Manufacturer: Linux 4.13.0-parrot4-amd64
uhci_hcd [ 1.278501] usb usb1: SerialNumber: 0000:00:1d.0 [ 1.278638] hub 1-0:1.0: USB
hub found [ 1.278644] hub 1-0:1.0: 2 ports detected [ 1.278877] uhci_hcd 0000:00:1d.1:
UHCI Host Controller [ 1.278883] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 2 [ 1.278890] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.278916] uhci_hcd
0000:00:1d.1: irq 19, io base 0x0000d480 [ 1.278966] usb usb2: New USB device found,
idVendor=1d6b, idProduct=0001 [ 1.278968] usb usb2: New USB device strings: Mfr=3,
Product=2, SerialNumber=1 [ 1.278969] usb usb2: Product: UHCI Host Controller [ 1.278970]
usb usb2: Manufacturer: Linux 4.13.0-parrot4-amd64 uhci_hcd [ 1.278971] usb usb2:
SerialNumber: 0000:00:1d.1 [ 1.279062] hub 2-0:1.0: USB hub found [ 1.279069] hub 2-
0:1.0: 2 ports detected [ 1.279218] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.279223]
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 1.279228]
uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.279249] uhci_hcd 0000:00:1d.2: irq 18, io base
0x0000d800 [ 1.279289] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.279290] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [
1.279291] usb usb3: Product: UHCI Host Controller [ 1.279292] usb usb3: Manufacturer:
Linux 4.13.0-parrot4-amd64 uhci_hcd [ 1.279293] usb usb3: SerialNumber: 0000:00:1d.2 [
1.279381] hub 3-0:1.0: USB hub found [ 1.279386] hub 3-0:1.0: 2 ports detected [ 1.279521]
uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.279525] uhci_hcd 0000:00:1d.3: new USB
bus registered, assigned bus number 4 [ 1.279531] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.279552] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880 [ 1.279596] usb usb4: New
USB device found, idVendor=1d6b, idProduct=0001 [ 1.279597] usb usb4: New USB device
strings: Mfr=3, Product=2, SerialNumber=1 [ 1.279599] usb usb4: Product: UHCI Host
Controller [ 1.279600] usb usb4: Manufacturer: Linux 4.13.0-parrot4-amd64 uhci_hcd [
1.279601] usb usb4: SerialNumber: 0000:00:1d.3 [ 1.279683] hub 4-0:1.0: USB hub found [
1.279688] hub 4-0:1.0: 2 ports detected [ 1.280331] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 1.280346] ACPI: Power
Button [PWRB] [ 1.280395] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.280409] ACPI: Power Button
[PWRF] [ 1.280467] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.280473] ehci-pci
0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 1.280487] ehci-pci
0000:00:1d.7: debug port 1 [ 1.284382] ehci-pci 0000:00:1d.7: cache line size of 32 is not
supported [ 1.284410] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfeaf7c00 [ 1.293687] SCSI
subsystem initialized [ 1.295892] libata version 3.00 loaded. [ 1.301499] ehci-pci
0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.301586] usb usb5: New USB device found,
idVendor=1d6b, idProduct=0002 [ 1.301588] usb usb5: New USB device strings: Mfr=3,
Product=2, SerialNumber=1 [ 1.301589] usb usb5: Product: EHCI Host Controller [ 1.301590]
usb usb5: Manufacturer: Linux 4.13.0-parrot4-amd64 ehci_hcd [ 1.301591] usb usb5:
SerialNumber: 0000:00:1d.7 [ 1.301703] hub 5-0:1.0: USB hub found [ 1.301711] hub 5-
0:1.0: 8 ports detected [ 1.317915] atl1c 0000:01:00.0: version 1.0.1.1-NAPI [ 1.326757] hub
1-0:1.0: USB hub found [ 1.326773] hub 1-0:1.0: 2 ports detected [ 1.353402] hub 2-0:1.0:
USB hub found [ 1.353416] hub 2-0:1.0: 2 ports detected [ 1.380057] hub 3-0:1.0: USB hub
found [ 1.380158] hub 3-0:1.0: 2 ports detected [ 1.406728] hub 4-0:1.0: USB hub found [
1.406741] hub 4-0:1.0: 2 ports detected [ 1.407121] pci 0000:00:00.0: Intel G41 Chipset [
1.407135] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [
1.407527] pci 0000:00:00.0: detected 32768K stolen memory [ 1.407548] [drm] Memory
usable by graphics device = 2048M [ 1.407551] [drm] Replacing VGA console driver [
1.408254] Console: switching to colour dummy device 80x25 [ 1.413334] [drm] Supports
vblank timestamp caching Rev 2 (21.10.2013). [ 1.413335] [drm] Driver supports precise
vblank timestamp query. [ 1.413610] i915 0000:00:02.0: vgaarb: changed VGA decodes:
olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.416780] [drm] RC6 disabled,
disabling runtime PM support [ 1.416946] [drm] Initialized i915 1.6.0 20170619 for
0000:00:02.0 on minor 0 [ 1.417114] ata_piix 0000:00:1f.1: version 2.13 [ 1.418050] scsi
host0: ata_piix [ 1.418189] scsi host1: ata_piix [ 1.418228] ata1: PATA max UDMA/100 cmd
0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.418229] ata2: PATA max UDMA/100 cmd 0x170 ctl
0x376 bmdma 0xffa8 irq 15 [ 1.418308] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [
1.419069] scsi host2: ata_piix [ 1.419137] scsi host3: ata_piix [ 1.419173] ata3: SATA max
UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 22 [ 1.419173] ata4: SATA max
UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 22 [ 1.512934] fbcon: inteldrmfb (fb0)
is primary device [ 1.532444] Console: switching to colour frame buffer device 170x48 [
1.551230] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.756638] tsc: Refined
TSC clocksource calibration: 2934.166 MHz [ 1.756644] clocksource: tsc: mask:
0xffffffffffffffff max_cycles: 0x2a4b566c182, max_idle_ns: 440795205247 ns [ 1.779972] usb
1-2: new low-speed USB device number 2 using uhci_hcd [ 1.953996] usb 1-2: New USB
device found, idVendor=0c45, idProduct=7603 [ 1.953999] usb 1-2: New USB device strings:
Mfr=0, Product=2, SerialNumber=0 [ 1.954001] usb 1-2: Product: USB Keyboard [ 1.959687]
hidraw: raw HID events driver (C) Jiri Kosina [ 2.003428] usbcore: registered new interface
driver usbhid [ 2.003430] usbhid: USB HID core driver [ 2.004139] input: USB Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/0003:0C45:7603.0001/input/input5 [
2.060185] hid-generic 0003:0C45:7603.0001: input,hidraw0: USB HID v1.11 Keyboard [USB
Keyboard] on usb-0000:00:1d.0-2/input0 [ 2.060662] input: USB Keyboard as

/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/0003:0C45:7603.0002/input/input6 [
2.116747] hid-generic 0003:0C45:7603.0002: input,hiddev0,hidraw1: USB HID v1.11
Keyboard [USB Keyboard] on usb-0000:00:1d.0-2/input1 [ 2.353306] usb 5-5: new high-
speed USB device number 3 using ehci-pci [ 2.490795] usb 5-5: New USB device found,
idVendor=abcd, idProduct=1234 [ 2.490798] usb 5-5: New USB device strings: Mfr=1,
Product=2, SerialNumber=3 [ 2.490801] usb 5-5: Product: UDisk [ 2.490802] usb 5-5:
Manufacturer: General [ 2.490804] usb 5-5: SerialNumber: Љ [ 2.493110] usb-storage 5-
5:1.0: USB Mass Storage device detected [ 2.493209] scsi host4: usb-storage 5-5:1.0 [
2.493274] usbcore: registered new interface driver usb-storage [ 2.493593] usbcore:
registered new interface driver uas [ 2.736640] usb 4-1: new low-speed USB device number
2 using uhci_hcd [ 2.770018] clocksource: Switched to clocksource tsc [ 2.908655] usb 4-1:
New USB device found, idVendor=192f, idProduct=0916 [ 2.908658] usb 4-1: New USB
device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.908660] usb 4-1: Product: USB Optical
Mouse [ 2.926092] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.3/usb4/4-
1/4-1:1.0/0003:192F:0916.0003/input/input7 [ 2.926157] hid-generic
0003:192F:0916.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-
0000:00:1d.3-1/input0 [ 3.336635] usb 5-8: new high-speed USB device number 5 using
ehci-pci [ 3.475543] usb 5-8: New USB device found, idVendor=058f, idProduct=6364 [
3.475546] usb 5-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.475548]
usb 5-8: Product: Mass Storage Device [ 3.475550] usb 5-8: Manufacturer: Generic [
3.475552] usb 5-8: SerialNumber: 058F63646476 [ 3.475952] usb-storage 5-8:1.0: USB
Mass Storage device detected [ 3.476632] scsi host5: usb-storage 5-8:1.0 [ 3.478040] hid-
generic 0003:058F:6364.0004: hiddev1,hidraw3: USB HID v1.10 Device [Generic Mass
Storage Device] on usb-0000:00:1d.7-8/input1 [ 3.517195] scsi 4:0:0:0: Direct-Access
General UDisk 5.00 PQ: 0 ANSI: 2 [ 3.519942] sd 4:0:0:0: [sda] 15728640 512-byte logical
blocks: (8.05 GB/7.50 GiB) [ 3.520556] sd 4:0:0:0: [sda] Write Protect is off [ 3.520559] sd
4:0:0:0: [sda] Mode Sense: 0b 00 00 08 [ 3.521179] sd 4:0:0:0: [sda] No Caching mode page
found [ 3.521230] sd 4:0:0:0: [sda] Assuming drive cache: write through [ 3.574574] sda:
sda1 [ 3.577178] sd 4:0:0:0: [sda] Attached SCSI removable disk [ 3.806340] loop: module
loaded [ 4.503943] scsi 5:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 [
4.504557] scsi 5:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0 [
4.505181] scsi 5:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0 [
4.505809] scsi 5:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS [
4.540557] sd 5:0:0:3: [sde] Attached SCSI removable disk [ 4.541181] sd 5:0:0:0: [sdb]
Attached SCSI removable disk [ 4.541803] sd 5:0:0:1: [sdc] Attached SCSI removable disk [
4.542429] sd 5:0:0:2: [sdd] Attached SCSI removable disk [ 5.066171] random: crng init done
[ 6.444295] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 7.536886] ip_tables: (C)
2000-2006 Netfilter Core Team [ 7.557068] systemd[1]: systemd 235 running in system
mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP
+LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS
+KMOD -IDN2 +IDN default-hierarchy=hybrid) [ 7.557174] systemd[1]: Detected architecture
x86-64. [ 7.564322] systemd[1]: Set hostname to . [ 7.601760] systemd[1]: Initializing
machine ID from random generator. [ 8.192236] systemd[1]: Reached target User and Group
Name Lookups. [ 8.192442] systemd[1]: Created slice User and Session Slice. [ 8.192553]
systemd[1]: Created slice System Slice. [ 8.192593] systemd[1]: Listening on udev Kernel
Socket. [ 8.192627] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [
8.192655] systemd[1]: Listening on LVM2 metadata daemon socket. [ 8.580209] systemd-
journald[407]: Received request to flush runtime journal from PID 1 [ 9.269101] shpchp:
Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.509949] ATK0110 ATK0110:00:
hwmon_device_register() is deprecated. Please convert the driver to use
hwmon_device_register_with_info(). [ 9.553060] parport_pc 00:02: reported by Plug and Play
ACPI [ 9.553140] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [
9.556848] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 9.556862]
intel_rng: FWH not detected [ 9.694165] ACPI Warning: SystemIO range
0x0000000000000828-0x000000000000082F conflicts with OpRegion
0x0000000000000800-0x000000000000084F (\PMRG) (20170531/utaddress-247) [
9.694173] ACPI: If an ACPI driver is available for this device, you should use it instead of the
native driver [ 9.695774] ACPI Warning: SystemIO range 0x00000000000004B0-
0x00000000000004BF conflicts with OpRegion 0x0000000000000480-
0x00000000000004BF (\GPS0) (20170531/utaddress-247) [ 9.695778] ACPI: If an ACPI
driver is available for this device, you should use it instead of the native driver [ 9.695780]
ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with
OpRegion 0x0000000000000480-0x00000000000004BF (\GPS0) (20170531/utaddress-
247) [ 9.695782] ACPI: If an ACPI driver is available for this device, you should use it instead
of the native driver [ 9.695783] lpc_ich: Resource conflict(s) found affecting gpio_ich [
9.845430] leds_ss4200: no LED devices found [ 9.995529] ppdev: user-space parallel port
driver [ 10.031188] iTCO_vendor_support: vendor-support=0 [ 10.032935] iTCO_wdt: Intel
TCO WatchDog Timer Driver v1.11 [ 10.032977] iTCO_wdt: Found a ICH7 or ICH7R TCO
device (Version=2, TCOBASE=0x0860) [ 10.033486] iTCO_wdt: initialized. heartbeat=30 sec
(nowayout=0) [ 10.164573] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-
VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 10.164575] snd_hda_codec_realtek
hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 10.164577] snd_hda_codec_realtek
hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 10.164578] snd_hda_codec_realtek
hdaudioC0D0: mono: mono_out=0x0 [ 10.164579] snd_hda_codec_realtek hdaudioC0D0:
dig-out=0x11/0x0 [ 10.164580] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 10.164582]
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 10.164583] snd_hda_codec_realtek
hdaudioC0D0: Rear Mic=0x18 [ 10.164584] snd_hda_codec_realtek hdaudioC0D0:
Line=0x1a [ 10.201435] input: HDA Intel Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 10.201488] input: HDA Intel Rear
Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 10.201534] input: HDA
Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 10.201583] input:
HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 10.201629]
input: HDA Intel Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 10.209735] sd 4:0:0:0: Attached
scsi generic sg0 type 0 [ 10.209789] sd 5:0:0:0: Attached scsi generic sg1 type 0 [
10.209820] sd 5:0:0:1: Attached scsi generic sg2 type 0 [ 10.209848] sd 5:0:0:2: Attached
scsi generic sg3 type 0 [ 10.209877] sd 5:0:0:3: Attached scsi generic sg4 type 0 [
10.258599] intel_powerclamp: No package C-state available [ 19.788838] IPv6:
ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.789620] IPv6:
ADDRCONF(NETDEV_UP): eth0: link is not ready [ 664.962306] IPv6:
ADDRCONF(NETDEV_UP): eth0: link is not ready