Başlangıçta çıkan hata kodları nasıl kaydedilir?

[motorhead]

Merhabalar herkese.

Ubuntu 16.04 kullanıyorum, yanında Windows 7 kurulu ve her açılışta (grub'dan ubuntu'yu seçtikten sonra) şu şekilde bir kod çıkıyor ondan sonra ubuntu açılıyor.

Kod Seç Genişlet


/dev/sda6: clean, 355773/1835008 files, 470404803/7335680 blocks


sanırım her seferinde bunun olması normal değilmiş. tek sorunum bu da değil, arada bir üsttekinin altında başka hata kodları çıkıyor ve ubuntu açılmıyor. bazen iki-üç kere tekrar başlattıktan sonra açılıyor. bundan sonra uzun bir süre (2-3 ay) bir daha olmuyor. ancak üstteki kod her defasında çıkıyor. sanırım kodlar sabit disk ile ilgili, i/o error, ext4-fs,sda5,superblock,ata1.00 vb. şeyler var benim görebildiklerim. bu hata kodlarını verip açılmama olayı neredeyse 1 yıldır sürüyor. windows'a geçip sabit disk sağlığını gösteren programlara bakıyorum değişen bir şey görünmüyor. bugün de şuna benzer kodlar çıktı mesela;



üstteki kodu ve ekran görüntüsünü ise hataları kayıt altına alamadığım için başka bir siteden temsili olarak aldım.  bu hata kodlarını nasıl kaydedebilirim? journalctl ile bir şeyler denemiştim ama journalctl'nin gösterdiği kodlar bunlar değil, benim bahsettiklerimi kayıt etmek için başka bir şey yapmak gerek sanırım.

bu hata kodlarının sebebi nedir? hata kodlarına neden olan sorunu nasıl çözebilirim?

[mendirec]

[mention=631200]@motorhead[/mention] " i/o error" buna benzer bir hata görüyorsan çok büyük bir ihtimalle sabit diskte bir sıkıntı vardır. Diskler uygulamasında "Değerlendirme" kısmı var. Bu kısım sabit diskin sağlığı konusunda bilgi verir. Bir bakar mısın, ne yazıyor?
İlk verdiğin çıktı ise çok önemli değil diye biliyorum.

[motorhead]

[mention=631215]@mendirec[/mention] "Disk Tamam, bir nitelik başarısız" yazıyor.

sanırım ilk çıktı bilgisayar düzgün kapanmadığında oluyormuş, ama ben her seferinde düzgün kapatıyorum ve ona rağmen her başlangıçta çıkıyor.

sabit diskte sorun olsa şaşırmam çünkü dizüstü bilgisayar kullanıyorum, daha önce de sabit diskim bozulmuştu. gereğinden fazla ısınıyor kronik sorunlu bir seri. (hp pavilion dv6) ancak dediğim gibi yaklaşık bir yıldır ara ara hata kodları verip açılmıyor, açıldıktan sonra da uzun bir süre karşıma çıkmıyor,  yani donanımsal bir sorun için bir yıl uzun bir süre diye düşünüyorum. windows'u pek kullanmıyorum ancak windows'u başlatırken böyle bir sorunla karşılaşmıyorum. hatta ubuntu açılmadığı zaman bile windows'u başlatabiliyorum.

[mendirec]

[mention=631217]@motorhead[/mention] Şu komutları sırasıyla uygula ve çıktıları buraya geç lütfen. 3. komuttan sonra ev dizininde dmesg adlı bir dosya oluşacak. Onun da içeriğini buraya geç lütfen.

Kod Seç Genişlet

sudo apt install smartmontools
sudo smartctl --all /dev/sda
dmesg > dmesg


[motorhead]

[mention=631219]@mendirec[/mention] ilk çıktı

Kod Seç Genişlet

smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-81-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Laptop SSHD
Device Model:     ST500LM000-1EJ162
Serial Number:    W3719HJQ
LU WWN Device Id: 5 000c50 06e39ca8e
Firmware Version: SM14
User Capacity:    500.107.862.016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Sep 25 14:59:12 2017 +03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (  139) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: (   1) minutes.
Extended self-test routine
recommended polling time: (  96) minutes.
Conveyance self-test routine
recommended polling time: (   2) minutes.
SCT capabilities:        (0x1081) SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   118   099   006    Pre-fail  Always       -       179447232
  3 Spin_Up_Time            0x0003   099   098   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   098   098   020    Old_age   Always       -       2137
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   068   060   030    Pre-fail  Always       -       90340382129
  9 Power_On_Hours          0x0032   091   091   000    Old_age   Always       -       8641
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   098   098   020    Old_age   Always       -       2136
184 End-to-End_Error        0x0032   098   098   099    Old_age   Always   FAILING_NOW 2
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       12885098511
189 High_Fly_Writes         0x003a   059   059   000    Old_age   Always       -       41
190 Airflow_Temperature_Cel 0x0022   055   034   045    Old_age   Always   In_the_past 45 (255 255 45 41 0)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       78
193 Load_Cycle_Count        0x0032   098   098   000    Old_age   Always       -       5740
194 Temperature_Celsius     0x0022   045   066   000    Old_age   Always       -       45 (0 21 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2 occurred at disk power-on lifetime: 8422 hours (350 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00      00:00:54.373  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      00:00:54.373  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:00:54.373  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:00:54.373  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:00:54.372  READ FPDMA QUEUED

Error 1 occurred at disk power-on lifetime: 8422 hours (350 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00      00:00:53.264  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      00:00:53.263  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      00:00:53.262  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      00:00:53.261  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      00:00:53.259  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

ikinci çıktı

Kod Seç Genişlet

[    0.000000] microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-81-generic (buildd@lgw01-02) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #104-Ubuntu SMP Wed Jun 14 08:17:06 UTC 2017 (Ubuntu 4.4.0-81.104-generic 4.4.67)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-81-generic root=UUID=974b86a1-a692-4ae0-848a-3993e74ad3f9 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009ce3efff] usable
[    0.000000] BIOS-e820: [mem 0x000000009ce3f000-0x000000009cebefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion dv6 Notebook PC/17F9, BIOS F.1C 01/23/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x15fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 09D000000 mask FFF000000 uncachable
[    0.000000]   3 base 09E000000 mask FFE000000 uncachable
[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   5 base 100000000 mask FC0000000 write-back
[    0.000000]   6 base 140000000 mask FF0000000 write-back
[    0.000000]   7 base 150000000 mask FF0000000 write-back
[    0.000000]   8 base 15FE00000 mask FFFE00000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x0220b000, 0x0220bfff] PGTABLE
[    0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE
[    0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
[    0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[    0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x336f2000-0x35b70fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x000000009CFFE120 000094 (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009CFFC000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 0x000000009CFEB000 00DB7F (v01 HP     INSYDE   00000000 MSFT 01000013)
[    0.000000] ACPI: FACS 0x000000009CF6C000 000040
[    0.000000] ACPI: FACS 0x000000009CF6C000 000040
[    0.000000] ACPI: ASF! 0x000000009CFFD000 0000A5 (v32 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: HPET 0x000000009CFFB000 000038 (v01 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 0x000000009CFFA000 00008C (v02 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 0x000000009CFF9000 00003C (v01 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 0x000000009CFEA000 000176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 0x000000009CFE9000 00051F (v01 HP     INSYDE   00001000 MSFT 01000013)
[    0.000000] ACPI: BOOT 0x000000009CFE7000 000028 (v01 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: ASPT 0x000000009CFE4000 000034 (v07 HP     INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 0x000000009CFE3000 0007C2 (v01 HP     INSYDE   00003000 INTL 20100121)
[    0.000000] ACPI: SSDT 0x000000009CFE2000 000996 (v01 HP     INSYDE   00003000 INTL 20100121)
[    0.000000] ACPI: SSDT 0x000000009CFE1000 0002DA (v01 HP     INSYDE   00003000 INTL 20100121)
[    0.000000] ACPI: SSDT 0x000000009CFE0000 00035D (v01 HP     INSYDE   00003000 INTL 20100121)
[    0.000000] ACPI: SSDT 0x000000009CFDA000 0024A1 (v01 HP     INSYDE   00001000 INTL 20100121)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000015fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x15fdf8000-0x15fdfcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000015fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000009ce3efff]
[    0.000000]   node   0: [mem 0x000000009cfff000-0x000000009cffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000015fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000015fdfffff]
[    0.000000] On node 0 totalpages: 1035228
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9977 pages used for memmap
[    0.000000]   DMA32 zone: 638528 pages, LIFO batch:31
[    0.000000]   Normal zone: 6136 pages used for memmap
[    0.000000]   Normal zone: 392704 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9ce3f000-0x9cebefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88015fa00000 s98264 r8192 d28712 u262144
[    0.000000] pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1018895
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-81-generic root=UUID=974b86a1-a692-4ae0-848a-3993e74ad3f9 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3951472K/4140912K available (8469K kernel code, 1294K rwdata, 3984K rodata, 1484K init, 1316K bss, 189440K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] Build-time adjustment of leaf fanout to 64.
[    0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:488 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2394.525 MHz processor
[    0.000035] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.05 BogoMIPS (lpj=9578100)
[    0.000038] pid_max: default: 32768 minimum: 301
[    0.000044] ACPI: Core revision 20150930
[    0.011430] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.011451] Security Framework initialized
[    0.011453] Yama: becoming mindful.
[    0.011470] AppArmor: AppArmor initialized
[    0.011742] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.012698] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.013145] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.013150] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.013378] Initializing cgroup subsys io
[    0.013382] Initializing cgroup subsys memory
[    0.013390] Initializing cgroup subsys devices
[    0.013392] Initializing cgroup subsys freezer
[    0.013395] Initializing cgroup subsys net_cls
[    0.013397] Initializing cgroup subsys perf_event
[    0.013399] Initializing cgroup subsys net_prio
[    0.013403] Initializing cgroup subsys hugetlb
[    0.013404] Initializing cgroup subsys pids
[    0.013427] CPU: Physical Processor ID: 0
[    0.013428] CPU: Processor Core ID: 0
[    0.013433] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.013434] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.013436] mce: CPU supports 7 MCE banks
[    0.013445] CPU0: Thermal monitoring handled by SMI
[    0.013452] process: using mwait in idle threads
[    0.013455] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.013456] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.013878] Freeing SMP alternatives memory: 32K (ffffffff820b8000 - ffffffff820c0000)
[    0.028475] ftrace: allocating 32129 entries in 126 pages
[    0.044633] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.044636] smpboot: Max logical packages: 4
[    0.044710] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.045162] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.084851] TSC deadline timer enabled
[    0.084854] smpboot: CPU0: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.084874] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.084896] ... version:                3
[    0.084897] ... bit width:              48
[    0.084898] ... generic registers:      4
[    0.084899] ... value mask:             0000ffffffffffff
[    0.084900] ... max period:             00007fffffffffff
[    0.084901] ... fixed-purpose events:   3
[    0.084902] ... event mask:             000000070000000f
[    0.085721] x86: Booting SMP configuration:
[    0.085723] .... node  #0, CPUs:      #1
[    0.086020] CPU1: Thermal monitoring handled by SMI
[    0.088188] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.088274]  #2
[    0.088961] microcode: CPU2 microcode updated early to revision 0x29, date = 2013-06-12
[    0.088994] CPU2: Thermal monitoring handled by SMI
[    0.091123]  #3
[    0.091489] CPU3: Thermal monitoring handled by SMI
[    0.093538] x86: Booted up 1 node, 4 CPUs
[    0.093542] smpboot: Total of 4 processors activated (19156.20 BogoMIPS)
[    0.096816] devtmpfs: initialized
[    0.099123] evm: security.selinux
[    0.099124] evm: security.SMACK64
[    0.099125] evm: security.SMACK64EXEC
[    0.099126] evm: security.SMACK64TRANSMUTE
[    0.099127] evm: security.SMACK64MMAP
[    0.099127] evm: security.ima
[    0.099128] evm: security.capability
[    0.099193] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
[    0.099288] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.099304] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.099403] pinctrl core: initialized pinctrl subsystem
[    0.099517] RTC time: 11:53:38, date: 09/25/17
[    0.099630] NET: Registered protocol family 16
[    0.109547] cpuidle: using governor ladder
[    0.125556] cpuidle: using governor menu
[    0.125564] PCCT header not found.
[    0.125686] Simple Boot Flag at 0x44 set to 0x1
[    0.125718] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.125720] ACPI: bus type PCI registered
[    0.125721] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.125798] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.125800] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.125812] PCI: Using configuration type 1 for base access
[    0.125851] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.126020] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.126021] mtrr: probably your BIOS does not setup all CPUs.
[    0.126022] mtrr: corrected configuration.
[    0.142006] ACPI: Added _OSI(Module Device)
[    0.142008] ACPI: Added _OSI(Processor Device)
[    0.142009] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.142010] ACPI: Added _OSI(Processor Aggregator Device)
[    0.144784] ACPI: Executed 1 blocks of module-level executable AML code
[    0.147731] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.148125] ACPI: Dynamic OEM Table Load:
[    0.148133] ACPI: SSDT 0xFFFF88015A75A000 000727 (v01 PmRef  Cpu0Cst  00003001 INTL 20100121)
[    0.148690] ACPI: Dynamic OEM Table Load:
[    0.148696] ACPI: SSDT 0xFFFF88015A792C00 000303 (v01 PmRef  ApIst    00003000 INTL 20100121)
[    0.149179] ACPI: Dynamic OEM Table Load:
[    0.149183] ACPI: SSDT 0xFFFF88015A014000 000119 (v01 PmRef  ApCst    00003000 INTL 20100121)
[    0.150025] ACPI : EC: EC started
[    0.154087] ACPI: Interpreter enabled
[    0.154107] ACPI: (supports S0 S3 S4 S5)
[    0.154109] ACPI: Using IOAPIC for interrupt routing
[    0.154134] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.155351] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1)
[    0.162983] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.162988] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.163019] \_SB_.PCI0:_OSC invalid UUID
[    0.163020] _OSC request data:1 1f 0
[    0.163024] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.163445] PCI host bridge to bus 0000:00
[    0.163448] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.163450] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.163452] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.163453] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[    0.163455] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.163463] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.163552] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.163584] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.163621] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.163664] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.163676] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[    0.163682] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.163687] pci 0000:00:02.0: reg 0x20: [io  0x6000-0x603f]
[    0.163804] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.163837] pci 0000:00:16.0: reg 0x10: [mem 0xc7504000-0xc750400f 64bit]
[    0.163903] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.163985] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.164326] pci 0000:00:1a.0: reg 0x10: [mem 0xc750a000-0xc750a3ff]
[    0.166203] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.166259] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.166302] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.166330] pci 0000:00:1b.0: reg 0x10: [mem 0xc7500000-0xc7503fff 64bit]
[    0.166394] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.166437] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.166478] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.166556] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.166599] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.166639] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.166716] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.166759] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.166798] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    0.166874] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.166917] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.166957] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.167034] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.167076] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.167119] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.167452] pci 0000:00:1d.0: reg 0x10: [mem 0xc7509000-0xc75093ff]
[    0.169326] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.169379] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.169422] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.169593] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.169618] pci 0000:00:1f.2: reg 0x10: [io  0x6088-0x608f]
[    0.169626] pci 0000:00:1f.2: reg 0x14: [io  0x609c-0x609f]
[    0.169634] pci 0000:00:1f.2: reg 0x18: [io  0x6080-0x6087]
[    0.169642] pci 0000:00:1f.2: reg 0x1c: [io  0x6098-0x609b]
[    0.169651] pci 0000:00:1f.2: reg 0x20: [io  0x6060-0x607f]
[    0.169659] pci 0000:00:1f.2: reg 0x24: [mem 0xc7508000-0xc75087ff]
[    0.169692] pci 0000:00:1f.2: PME# supported from D3hot
[    0.169769] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.169787] pci 0000:00:1f.3: reg 0x10: [mem 0xc7506000-0xc75060ff 64bit]
[    0.169808] pci 0000:00:1f.3: reg 0x20: [io  0x6040-0x605f]
[    0.169942] pci 0000:01:00.0: [1002:6760] type 00 class 0x030000
[    0.169969] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.169980] pci 0000:01:00.0: reg 0x18: [mem 0xc6500000-0xc651ffff 64bit]
[    0.169987] pci 0000:01:00.0: reg 0x20: [io  0x5000-0x50ff]
[    0.169999] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.170030] pci 0000:01:00.0: supports D1 D2
[    0.170052] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.177751] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.177759] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.177766] pci 0000:00:01.0:   bridge window [mem 0xc6500000-0xc74fffff]
[    0.177776] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.177899] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
[    0.177948] pci 0000:07:00.0: reg 0x10: [io  0x4000-0x40ff]
[    0.177983] pci 0000:07:00.0: reg 0x18: [mem 0xc0404000-0xc0404fff 64bit pref]
[    0.178005] pci 0000:07:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref]
[    0.178091] pci 0000:07:00.0: supports D1 D2
[    0.178092] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.179998] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.185767] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
[    0.185777] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.185786] pci 0000:00:1c.0:   bridge window [mem 0xc5500000-0xc64fffff]
[    0.185800] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[    0.186045] pci 0000:0d:00.0: [8086:008b] type 00 class 0x028000
[    0.186324] pci 0000:0d:00.0: reg 0x10: [mem 0xc4500000-0xc4501fff 64bit]
[    0.186867] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[    0.187014] pci 0000:0d:00.0: System wakeup disabled by ACPI
[    0.193893] pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
[    0.193898] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.193902] pci 0000:00:1c.1:   bridge window [mem 0xc4500000-0xc54fffff]
[    0.193908] pci 0000:00:1c.1:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[    0.193985] pci 0000:13:00.0: [10ec:5209] type 00 class 0xff0000
[    0.194035] pci 0000:13:00.0: reg 0x10: [mem 0xc3501000-0xc3501fff]
[    0.194127] pci 0000:13:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.194187] pci 0000:13:00.0: supports D1 D2
[    0.194189] pci 0000:13:00.0: PME# supported from D1 D2 D3hot
[    0.194231] pci 0000:13:00.0: System wakeup disabled by ACPI
[    0.194282] pci 0000:13:00.1: [10ec:5209] type 00 class 0x080500
[    0.194330] pci 0000:13:00.1: reg 0x10: [mem 0xc3500000-0xc35000ff]
[    0.194477] pci 0000:13:00.1: supports D1 D2
[    0.194479] pci 0000:13:00.1: PME# supported from D1 D2 D3hot
[    0.201791] pci 0000:00:1c.2: PCI bridge to [bus 13-18]
[    0.201801] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.201810] pci 0000:00:1c.2:   bridge window [mem 0xc3500000-0xc44fffff]
[    0.201824] pci 0000:00:1c.2:   bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
[    0.202006] pci 0000:19:00.0: [1033:0194] type 00 class 0x0c0330
[    0.202117] pci 0000:19:00.0: reg 0x10: [mem 0xc3400000-0xc3401fff 64bit]
[    0.202322] pci 0000:19:00.0: PME# supported from D0 D3hot D3cold
[    0.202396] pci 0000:19:00.0: System wakeup disabled by ACPI
[    0.209846] pci 0000:00:1c.3: PCI bridge to [bus 19]
[    0.209861] pci 0000:00:1c.3:   bridge window [mem 0xc3400000-0xc34fffff]
[    0.210393] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.210445] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 10 11 12 14 15)
[    0.210494] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.210542] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.210591] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.210642] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 *4 5 6 10 11 12 14 15)
[    0.210694] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[    0.210742] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.211786] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.211837] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.211957] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.211959] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.211963] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.211965] vgaarb: loaded
[    0.211966] vgaarb: bridge control possible 0000:01:00.0
[    0.211967] vgaarb: no bridge control possible 0000:00:02.0
[    0.212195] SCSI subsystem initialized
[    0.212240] libata version 3.00 loaded.
[    0.212265] ACPI: bus type USB registered
[    0.212281] usbcore: registered new interface driver usbfs
[    0.212289] usbcore: registered new interface driver hub
[    0.212307] usbcore: registered new device driver usb
[    0.212449] PCI: Using ACPI for IRQ routing
[    0.220415] PCI: pci_cache_line_size set to 64 bytes
[    0.220575] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.220577] e820: reserve RAM buffer [mem 0x9ce3f000-0x9fffffff]
[    0.220578] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[    0.220579] e820: reserve RAM buffer [mem 0x15fe00000-0x15fffffff]
[    0.220704] NetLabel: Initializing
[    0.220705] NetLabel:  domain hash size = 128
[    0.220706] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.220718] NetLabel:  unlabeled traffic allowed by default
[    0.220797] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.220802] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.223819] amd_nb: Cannot enumerate AMD northbridges
[    0.223836] clocksource: Switched to clocksource hpet
[    0.230020] AppArmor: AppArmor Filesystem Enabled
[    0.230094] pnp: PnP ACPI init
[    0.230242] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.230245] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.230247] system 00:00: [io  0x1010-0x1013] has been reserved
[    0.230249] system 00:00: [io  0xffff] has been reserved
[    0.230251] system 00:00: [io  0x0400-0x0453] could not be reserved
[    0.230253] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.230255] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.230256] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.230261] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.230289] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.230334] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.230338] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.230384] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.230426] pnp 00:04: Plug and Play ACPI device, IDs SYN1e47 SYN1e00 SYN0002 PNP0f13 (active)
[    0.230553] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.230555] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.230557] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.230559] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.230561] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.230562] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.230564] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.230566] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.230568] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.230570] system 00:05: [mem 0x9fa00000-0x9fa00fff] has been reserved
[    0.230573] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.231672] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
[    0.231675] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved
[    0.231677] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.231692] pnp: PnP ACPI: found 7 devices
[    0.238285] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.238293] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.238295] pci 0000:13:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.238337] pci 0000:01:00.0: BAR 6: assigned [mem 0xc6520000-0xc653ffff pref]
[    0.238340] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.238342] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.238345] pci 0000:00:01.0:   bridge window [mem 0xc6500000-0xc74fffff]
[    0.238348] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.238352] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
[    0.238355] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.238360] pci 0000:00:1c.0:   bridge window [mem 0xc5500000-0xc64fffff]
[    0.238364] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[    0.238371] pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
[    0.238374] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.238379] pci 0000:00:1c.1:   bridge window [mem 0xc4500000-0xc54fffff]
[    0.238384] pci 0000:00:1c.1:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[    0.238391] pci 0000:13:00.0: BAR 6: assigned [mem 0xc3510000-0xc351ffff pref]
[    0.238393] pci 0000:00:1c.2: PCI bridge to [bus 13-18]
[    0.238396] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.238401] pci 0000:00:1c.2:   bridge window [mem 0xc3500000-0xc44fffff]
[    0.238405] pci 0000:00:1c.2:   bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
[    0.238412] pci 0000:00:1c.3: PCI bridge to [bus 19]
[    0.238417] pci 0000:00:1c.3:   bridge window [mem 0xc3400000-0xc34fffff]
[    0.238427] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.238429] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.238431] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.238433] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
[    0.238434] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.238436] pci_bus 0000:01: resource 1 [mem 0xc6500000-0xc74fffff]
[    0.238438] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[    0.238440] pci_bus 0000:07: resource 0 [io  0x4000-0x4fff]
[    0.238441] pci_bus 0000:07: resource 1 [mem 0xc5500000-0xc64fffff]
[    0.238443] pci_bus 0000:07: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
[    0.238444] pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
[    0.238446] pci_bus 0000:0d: resource 1 [mem 0xc4500000-0xc54fffff]
[    0.238447] pci_bus 0000:0d: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
[    0.238449] pci_bus 0000:13: resource 0 [io  0x2000-0x2fff]
[    0.238451] pci_bus 0000:13: resource 1 [mem 0xc3500000-0xc44fffff]
[    0.238452] pci_bus 0000:13: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref]
[    0.238454] pci_bus 0000:19: resource 1 [mem 0xc3400000-0xc34fffff]
[    0.238488] NET: Registered protocol family 2
[    0.238656] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.238731] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.238829] TCP: Hash tables configured (established 32768 bind 32768)
[    0.238853] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.238869] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.238923] NET: Registered protocol family 1
[    0.238940] pci 0000:00:02.0: Video device with shadowed ROM
[    0.280636] PCI: CLS 64 bytes, default 64
[    0.280686] Unpacking initramfs...
[    0.872241] Freeing initrd memory: 37372K (ffff8800336f2000 - ffff880035b71000)
[    0.872306] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.872309] software IO TLB [mem 0x98e3f000-0x9ce3f000] (64MB) mapped at [ffff880098e3f000-ffff88009ce3efff]
[    0.872392] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.872394] hw unit of domain pp0-core 2^-16 Joules
[    0.872395] hw unit of domain package 2^-16 Joules
[    0.872396] hw unit of domain pp1-gpu 2^-16 Joules
[    0.872482] Scanning for low memory corruption every 60 seconds
[    0.872903] audit: initializing netlink subsys (disabled)
[    0.872919] audit: type=2000 audit(1506340417.856:1): initialized
[    0.873297] Initialise system trusted keyring
[    0.873401] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.874922] zbud: loaded
[    0.875119] VFS: Disk quotas dquot_6.6.0
[    0.875155] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.875424] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.875688] fuse init (API version 7.23)
[    0.875855] Key type big_key registered
[    0.875876] Allocating IMA MOK and blacklist keyrings.
[    0.876277] Key type asymmetric registered
[    0.876281] Asymmetric key parser 'x509' registered
[    0.876319] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.876352] io scheduler noop registered
[    0.876356] io scheduler deadline registered (default)
[    0.876388] io scheduler cfq registered
[    0.876993] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.877001] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.877031] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.877032] vesafb: scrolling: redraw
[    0.877034] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.877046] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90000800000, using 3072k, total 3072k
[    0.877137] Console: switching to colour frame buffer device 128x48
[    0.877151] fb0: VESA VGA frame buffer device
[    0.877169] intel_idle: MWAIT substates: 0x21120
[    0.877170] intel_idle: v0.4.1 model 0x2A
[    0.877171] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.878147] ACPI: AC Adapter [AC] (on-line)
[    0.878204] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input0
[    0.879181] ACPI: Lid Switch [LID]
[    0.879227] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.879230] ACPI: Power Button [PWRB]
[    0.879275] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.879277] ACPI: Power Button [PWRF]
[    0.880587] pci 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[    0.880710] pci 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[    0.880821] pci 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[    0.880836] pci 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[    0.881207] pci_bus 0000:07: Allocating resources
[    0.881229] pci_bus 0000:0d: Allocating resources
[    0.881277] pci_bus 0000:13: Allocating resources
[    0.881298] pci_bus 0000:19: Allocating resources
[    0.881314] pcieport 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 19] add_size 1000
[    0.881317] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 19] add_size 200000 add_align 100000
[    0.881320] pci 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[    0.881324] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.881326] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.881328] pcieport 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.881330] pcieport 0000:00:1c.3: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.881337] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0x9fb00000-0x9fcfffff 64bit pref]
[    0.881341] pcieport 0000:00:1c.3: BAR 13: assigned [io  0x7000-0x7fff]
[    0.881535] pci_bus 0000:01: Allocating resources
[    0.881543] pci 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[    0.881633] pci 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[    0.905035] thermal LNXTHERM:00: registered as thermal_zone0
[    0.905039] ACPI: Thermal Zone [THRM] (55 C)
[    0.905102] GHES: HEST is not enabled!
[    0.905296] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.905850] ACPI: Battery Slot [BAT0] (battery absent)
[    0.907368] Linux agpgart interface v0.103
[    0.909058] loop: module loaded
[    0.909263] libphy: Fixed MDIO Bus: probed
[    0.909267] tun: Universal TUN/TAP device driver, 1.6
[    0.909268] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.909312] PPP generic driver version 2.4.2
[    0.909374] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.909378] ehci-pci: EHCI PCI platform driver
[    0.909503] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.909509] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.909522] ehci-pci 0000:00:1a.0: debug port 2
[    0.913417] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.913430] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc750a000
[    0.923865] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.923908] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.923910] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.923911] usb usb1: Product: EHCI Host Controller
[    0.923913] usb usb1: Manufacturer: Linux 4.4.0-81-generic ehci_hcd
[    0.923914] usb usb1: SerialNumber: 0000:00:1a.0
[    0.924035] hub 1-0:1.0: USB hub found
[    0.924041] hub 1-0:1.0: 2 ports detected
[    0.924229] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.924234] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.924245] ehci-pci 0000:00:1d.0: debug port 2
[    0.928160] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.928168] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc7509000
[    0.939865] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.939901] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.939903] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.939905] usb usb2: Product: EHCI Host Controller
[    0.939906] usb usb2: Manufacturer: Linux 4.4.0-81-generic ehci_hcd
[    0.939908] usb usb2: SerialNumber: 0000:00:1d.0
[    0.940016] hub 2-0:1.0: USB hub found
[    0.940022] hub 2-0:1.0: 2 ports detected
[    0.940121] ehci-platform: EHCI generic platform driver
[    0.940135] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.940140] ohci-pci: OHCI PCI platform driver
[    0.940150] ohci-platform: OHCI generic platform driver
[    0.940160] uhci_hcd: USB Universal Host Controller Interface driver
[    0.940242] xhci_hcd 0000:19:00.0: xHCI Host Controller
[    0.940247] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 3
[    0.940435] xhci_hcd 0000:19:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[    0.940629] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.940631] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.940633] usb usb3: Product: xHCI Host Controller
[    0.940634] usb usb3: Manufacturer: Linux 4.4.0-81-generic xhci-hcd
[    0.940636] usb usb3: SerialNumber: 0000:19:00.0
[    0.940741] hub 3-0:1.0: USB hub found
[    0.940752] hub 3-0:1.0: 2 ports detected
[    0.940839] xhci_hcd 0000:19:00.0: xHCI Host Controller
[    0.940843] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 4
[    0.943864] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.943880] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.943881] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.943883] usb usb4: Product: xHCI Host Controller
[    0.943885] usb usb4: Manufacturer: Linux 4.4.0-81-generic xhci-hcd
[    0.943886] usb usb4: SerialNumber: 0000:19:00.0
[    0.943992] hub 4-0:1.0: USB hub found
[    0.944003] hub 4-0:1.0: 2 ports detected
[    0.944132] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.952221] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.952226] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.952361] mousedev: PS/2 mouse device common for all mice
[    0.952552] rtc_cmos 00:01: RTC can wake from S4
[    0.952689] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.952715] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.952724] i2c /dev entries driver
[    0.952777] device-mapper: uevent: version 1.0.3
[    0.952845] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    0.952868] Intel P-state driver initializing.
[    0.953220] ledtrig-cpu: registered to indicate activity on CPUs
[    0.954242] NET: Registered protocol family 10
[    0.954742] NET: Registered protocol family 17
[    0.954779] Key type dns_resolver registered
[    0.955353] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[    0.955374] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[    0.955387] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[    0.955410] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[    0.955505] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.955916] registered taskstats version 1
[    0.955962] Loading compiled-in X.509 certificates
[    0.957902] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.958816] Loaded X.509 cert 'Build time autogenerated kernel key: 4e3fcaabc4148de0b198d1fb3d36a6c6d4cf062b'
[    0.958877] zswap: loaded using pool lzo/zbud
[    0.962022] Key type trusted registered
[    0.966112] Key type encrypted registered
[    0.966119] AppArmor: AppArmor sha1 policy hashing enabled
[    0.966122] ima: No TPM chip found, activating TPM-bypass!
[    0.966147] evm: HMAC attrs: 0x1
[    0.966542]   Magic number: 1:403:884
[    0.966639] rtc_cmos 00:01: setting system clock to 2017-09-25 11:53:38 UTC (1506340418)
[    0.966698] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.966699] EDD information not available.
[    0.966761] PM: Hibernation image not present or could not be loaded.
[    0.967954] Freeing unused kernel memory: 1484K (ffffffff81f45000 - ffffffff820b8000)
[    0.967956] Write protecting the kernel read-only data: 14336k
[    0.968421] Freeing unused kernel memory: 1760K (ffff880001848000 - ffff880001a00000)
[    0.968703] Freeing unused kernel memory: 112K (ffff880001de4000 - ffff880001e00000)
[    0.977734] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.977806] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.977819] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.977835] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.978003] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.978045] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.978267] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.978313] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.978358] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.978406] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.001181] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.014602] wmi: Mapper loaded
[    1.021291] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.021302] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.021362] [drm] Initialized drm 1.1.0 20060810
[    1.021912] r8169 0000:07:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000672000, 2c:41:38:62:a8:02, XID 0c900800 IRQ 30
[    1.021916] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.024738] sdhci: Secure Digital Host Controller Interface driver
[    1.024741] sdhci: Copyright(c) Pierre Ossman
[    1.027030] sdhci-pci 0000:13:00.1: SDHCI controller found [10ec:5209] (rev 1)
[    1.027124] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.027132] sdhci-pci 0000:13:00.1: No vmmc regulator found
[    1.027134] sdhci-pci 0000:13:00.1: No vqmmc regulator found
[    1.027140] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.028672] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.029681] mmc0: SDHCI controller on PCI [0000:13:00.1] using DMA
[    1.031743] rtsx_pci 0000:13:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 31
[    1.036291] ahci 0000:00:1f.2: version 3.0
[    1.051884] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode
[    1.051889] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[    1.061605] [drm] radeon kernel modesetting enabled.
[    1.061619] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[    1.062639] scsi host0: ahci
[    1.062780] scsi host1: ahci
[    1.062893] scsi host2: ahci
[    1.063005] scsi host3: ahci
[    1.063112] scsi host4: ahci
[    1.063219] scsi host5: ahci
[    1.063290] ata1: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508100 irq 32
[    1.063292] ata2: DUMMY
[    1.063294] ata3: DUMMY
[    1.063296] ata4: DUMMY
[    1.063297] ata5: DUMMY
[    1.063300] ata6: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508380 irq 32
[    1.063985] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.063987] AMD IOMMUv2 functionality not available on this system
[    1.064119] [drm] Memory usable by graphics device = 2048M
[    1.064123] checking generic (b0000000 300000) vs hw (b0000000 10000000)
[    1.064125] fb: switching to inteldrmfb from VESA VGA
[    1.064160] Console: switching to colour dummy device 80x25
[    1.064270] [drm] Replacing VGA console driver
[    1.070368] CRAT table not found
[    1.070371] Finished initializing topology ret=0
[    1.070380] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.070383] [drm] Driver supports precise vblank timestamp query.
[    1.070523] kfd kfd: Initialized module
[    1.070814] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[    1.072451] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    1.105634] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    1.106192] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[    1.106396] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input6
[    1.107085] fbcon: inteldrmfb (fb0) is primary device
[    1.107159] Console: switching to colour frame buffer device 170x48
[    1.107181] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.107347] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.107587] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[    1.107664] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    1.107791] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x103C:0x1656).
[    1.107801] [drm] register mmio base: 0xC6500000
[    1.107803] [drm] register mmio size: 131072
[    1.107805] vga_switcheroo: enabled
[    1.107922] ATPX version 1, functions 0x00000033
[    1.141341] ATOM BIOS: HP/Flex
[    1.141818] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    1.141820] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    1.141822] [drm] Detected VRAM RAM=1024M, BAR=256M
[    1.141823] [drm] RAM width 64bits DDR
[    1.141883] [TTM] Zone  kernel: Available graphics memory: 1996116 kiB
[    1.141884] [TTM] Initializing pool allocator
[    1.141889] [TTM] Initializing DMA pool allocator
[    1.141906] [drm] radeon: 1024M of VRAM memory ready
[    1.141907] [drm] radeon: 1024M of GTT memory ready.
[    1.141915] [drm] Loading CAICOS Microcode
[    1.141987] [drm] Internal thermal controller with fan control
[    1.146777] [drm] radeon: dpm initialized
[    1.146858] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.147586] [drm] PCIE gen 2 link speeds already enabled
[    1.150137] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[    1.150254] radeon 0000:01:00.0: WB enabled
[    1.150256] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880034faac00
[    1.150258] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880034faac0c
[    1.151706] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118
[    1.151708] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.151709] [drm] Driver supports precise vblank timestamp query.
[    1.151710] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    1.151746] radeon 0000:01:00.0: radeon: using MSI.
[    1.151793] [drm] radeon: irq initialized.
[    1.168260] [drm] ring test on 0 succeeded in 3 usecs
[    1.168271] [drm] ring test on 3 succeeded in 7 usecs
[    1.235874] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.251868] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.344166] [drm] ring test on 5 succeeded in 2 usecs
[    1.344174] [drm] UVD initialized successfully.
[    1.344449] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.344523] [drm] ib test on ring 3 succeeded in 0 usecs
[    1.368264] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.368266] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.368518] hub 1-1:1.0: USB hub found
[    1.368602] hub 1-1:1.0: 6 ports detected
[    1.383882] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.384259] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.384262] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.384578] hub 2-1:1.0: USB hub found
[    1.384756] hub 2-1:1.0: 6 ports detected
[    1.391876] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.395205] ata6.00: ATAPI: hp       DVDRAM GT50N, MP00, max UDMA/100
[    1.398143] ata6.00: configured for UDMA/100
[    1.497674] ata1.00: ATA-9: ST500LM000-1EJ162, SM14, max UDMA/133
[    1.497683] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.542075] ata1.00: configured for UDMA/133
[    1.542392] scsi 0:0:0:0: Direct-Access     ATA      ST500LM000-1EJ16 SM14 PQ: 0 ANSI: 5
[    1.542806] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.542816] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.542819] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.542902] sd 0:0:0:0: [sda] Write Protect is off
[    1.542906] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.542933] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.545071] scsi 5:0:0:0: CD-ROM            hp       DVDRAM GT50N     MP00 PQ: 0 ANSI: 5
[    1.564314] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.564324] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.564571] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.564678] sr 5:0:0:0: Attached scsi generic sg1 type 5
[    1.593126]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    1.594082] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.639886] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    1.655924] usb 2-1.1: new low-speed USB device number 3 using ehci-pci
[    1.733117] usb 1-1.1: New USB device found, idVendor=138a, idProduct=0018
[    1.733127] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    1.733133] usb 1-1.1: SerialNumber: d750d6d01012
[    1.754297] usb 2-1.1: New USB device found, idVendor=1c4f, idProduct=0026
[    1.754307] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.754312] usb 2-1.1: Product: USB Keyboard
[    1.754317] usb 2-1.1: Manufacturer: SIGMACHIP
[    1.758243] hidraw: raw HID events driver (C) Jiri Kosina
[    1.765050] usbcore: registered new interface driver usbhid
[    1.765052] usbhid: USB HID core driver
[    1.767664] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:1C4F:0026.0001/input/input8
[    1.803875] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[    1.820081] hid-generic 0003:1C4F:0026.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1d.0-1.1/input0
[    1.821297] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:1C4F:0026.0002/input/input9
[    1.823927] usb 2-1.2: new full-speed USB device number 4 using ehci-pci
[    1.871903] tsc: Refined TSC clocksource calibration: 2394.561 MHz
[    1.871914] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22842564e28, max_idle_ns: 440795246705 ns
[    1.876118] hid-generic 0003:1C4F:0026.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1d.0-1.1/input1
[    1.918743] psmouse serio1: synaptics: queried max coordinates: x [..5756], y [..4868]
[    1.919619] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c52f
[    1.919627] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.919632] usb 2-1.2: Product: USB Receiver
[    1.919637] usb 2-1.2: Manufacturer: Logitech
[    1.921932] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C52F.0003/input/input10
[    1.922080] hid-generic 0003:046D:C52F.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0
[    1.924154] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C52F.0004/input/input11
[    1.980196] hid-generic 0003:046D:C52F.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1
[    1.992060] [drm] ib test on ring 5 succeeded
[    1.992753] [drm] Radeon Display Connectors
[    1.993610] usb 1-1.2: New USB device found, idVendor=5986, idProduct=02ac
[    1.993614] usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.993616] usb 1-1.2: Product: HP TrueVision HD
[    1.993619] usb 1-1.2: Manufacturer: HP TrueVision HD
[    1.993621] usb 1-1.2: SerialNumber: 0x0003
[    2.003516] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1680, fw id: 726294
[    2.013868] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 1
[    2.059113] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.216003] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    2.872177] clocksource: Switched to clocksource tsc
[    2.884842] random: nonblocking pool is initialized
[    3.530474] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    3.530586] systemd[1]: Detected architecture x86-64.
[    3.535106] systemd[1]: Set hostname to <HP-Pavilion-dv6-Notebook-PC>.
[    5.056824] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.056874] systemd[1]: Reached target Remote File Systems (Pre).
[    5.056908] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.056916] systemd[1]: Reached target User and Group Name Lookups.
[    5.056943] systemd[1]: Listening on udev Kernel Socket.
[    5.056968] systemd[1]: Listening on udev Control Socket.
[    5.056988] systemd[1]: Listening on Syslog Socket.
[    5.057095] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.057150] systemd[1]: Listening on Journal Audit Socket.
[    5.057225] systemd[1]: Created slice User and Session Slice.
[    5.057257] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    5.057285] systemd[1]: Listening on Journal Socket.
[    5.057302] systemd[1]: Reached target Remote File Systems.
[    5.057353] systemd[1]: Created slice System Slice.
[    5.057411] systemd[1]: Created slice system-postgresql.slice.
[    5.068147] systemd[1]: Mounting Huge Pages File System...
[    5.112241] systemd[1]: Starting Uncomplicated firewall...
[    5.112750] systemd[1]: Started Braille Device Support.
[    5.113450] systemd[1]: Starting Set console keymap...
[    5.113491] systemd[1]: Reached target Slices.
[    5.114781] systemd[1]: Mounting Debug File System...
[    5.115186] systemd[1]: Mounting POSIX Message Queue File System...
[    5.115558] systemd[1]: Started Read required files in advance.
[    5.115681] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.115728] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.116183] systemd[1]: Starting Journal Service...
[    5.116819] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.116841] systemd[1]: Reached target Encrypted Volumes.
[    5.138963] systemd[1]: Starting Load Kernel Modules...
[    5.140385] systemd[1]: Mounted Debug File System.
[    5.140417] systemd[1]: Mounted Huge Pages File System.
[    5.140429] systemd[1]: Mounted POSIX Message Queue File System.
[    5.159750] systemd[1]: Started Uncomplicated firewall.
[    5.258573] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    5.268222] systemd[1]: Starting Create Static Device Nodes in /dev...
[    5.419154] lp: driver loaded but no devices found
[    5.421672] ppdev: user-space parallel port driver
[    5.424557] systemd[1]: Started Load Kernel Modules.
[    5.440087] systemd[1]: Starting Apply Kernel Variables...
[    5.440491] systemd[1]: Mounting FUSE Control File System...
[    5.446586] systemd[1]: Mounted FUSE Control File System.
[    5.674788] systemd[1]: Started Apply Kernel Variables.
[    5.770556] systemd[1]: Started Journal Service.
[    7.227497] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[    7.309712] systemd-journald[242]: Received request to flush runtime journal from PID 1
[    7.900452] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[    7.900460] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.900465] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[    7.900470] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[    7.900475] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.900477] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[    7.900481] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[    7.900486] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.900487] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[    7.900492] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[    7.900496] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.900498] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.980862] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.991697] hp_accel: laptop model unknown, using default axes configuration
[    7.992177] Initializing HPQ6001 module
[    8.359715] lis3lv02d: 8 bits 3DC sensor found
[    8.788028] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input12
[    8.788302] input: HP Wireless hotkeys as /devices/virtual/input/input13
[    8.922608] Intel(R) Wireless WiFi driver for Linux
[    8.922611] Copyright(c) 2003- 2015 Intel Corporation
[    8.922795] iwlwifi 0000:0d:00.0: can't disable ASPM; OS doesn't have ASPM control
[    9.081876] iwlwifi 0000:0d:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    9.112815] AVX version of gcm_enc/dec engaged.
[    9.112818] AES CTR mode by8 optimization enabled
[    9.174400] media: Linux media interface: v0.10
[    9.208684] snd_hda_intel 0000:00:1b.0: Applying patch firmware 'hda-jack-retask.fw'
[    9.474139] Linux video capture interface: v2.00
[    9.927650] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=2 (0xf/0xd/0x0/0x0/0x0) type:speaker
[    9.927654] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.927656] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    9.927657] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[    9.927658] snd_hda_codec_idt hdaudioC0D0:    inputs:
[    9.927661] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x11
[    9.927662] snd_hda_codec_idt hdaudioC0D0:      Mic=0xc
[    9.962712] uvcvideo: Found UVC 1.00 device HP TrueVision HD (5986:02ac)
[    9.969622] input: HP TrueVision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input16
[    9.969677] usbcore: registered new interface driver uvcvideo
[    9.969678] USB Video Class driver (1.1.1)
[    9.993774] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    9.993866] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    9.993950] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   10.043102] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   10.043106] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   10.043109] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   10.043112] iwlwifi 0000:0d:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[   10.043221] iwlwifi 0000:0d:00.0: L1 Enabled - LTR Disabled
[   10.080279] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   10.621701] intel_rapl: Found RAPL domain package
[   10.621705] intel_rapl: Found RAPL domain core
[   10.621708] intel_rapl: Found RAPL domain uncore
[   10.621713] intel_rapl: RAPL package 0 domain package locked by BIOS
[   11.086384] input: HP WMI hotkeys as /devices/virtual/input/input18
[   11.570946] Adding 4140028k swap on /dev/sda6.  Priority:-1 extents:1 across:4140028k FS
[   11.759934] cfg80211: World regulatory domain updated:
[   11.759939] cfg80211:  DFS Master region: unset
[   11.759940] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   11.759942] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   11.759944] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   11.759945] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   11.759947] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   11.759948] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   11.759950] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   11.759951] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   11.759952] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   14.180040] [drm] PCIE gen 2 link speeds already enabled
[   14.184184] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[   14.184278] radeon 0000:01:00.0: WB enabled
[   14.184280] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880034faac00
[   14.184282] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880034faac0c
[   14.185730] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118
[   14.201984] [drm] ring test on 0 succeeded in 3 usecs
[   14.201997] [drm] ring test on 3 succeeded in 7 usecs
[   14.377888] [drm] ring test on 5 succeeded in 2 usecs
[   14.377898] [drm] UVD initialized successfully.
[   14.377987] [drm] ib test on ring 0 succeeded in 0 usecs
[   14.378060] [drm] ib test on ring 3 succeeded in 0 usecs
[   14.754862] audit: type=1400 audit(1506340432.281:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=765 comm="apparmor_parser"
[   14.754874] audit: type=1400 audit(1506340432.281:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=765 comm="apparmor_parser"
[   14.754882] audit: type=1400 audit(1506340432.281:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=765 comm="apparmor_parser"
[   14.754889] audit: type=1400 audit(1506340432.281:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=765 comm="apparmor_parser"
[   14.755592] audit: type=1400 audit(1506340432.281:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=768 comm="apparmor_parser"
[   14.755598] audit: type=1400 audit(1506340432.281:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=768 comm="apparmor_parser"
[   14.757511] audit: type=1400 audit(1506340432.285:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=769 comm="apparmor_parser"
[   14.757521] audit: type=1400 audit(1506340432.285:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=769 comm="apparmor_parser"
[   14.772425] audit: type=1400 audit(1506340432.301:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=771 comm="apparmor_parser"
[   14.775714] audit: type=1400 audit(1506340432.301:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=764 comm="apparmor_parser"
[   14.994516] cgroup: new mount options do not match the existing superblock, will be ignored
[   15.032180] [drm] ib test on ring 5 succeeded
[   22.181154] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   22.181296] iwlwifi 0000:0d:00.0: L1 Enabled - LTR Disabled
[   22.188038] iwlwifi 0000:0d:00.0: L1 Enabled - LTR Disabled
[   22.188134] iwlwifi 0000:0d:00.0: Radio type=0x2-0x2-0x1
[   22.256766] iwlwifi 0000:0d:00.0: L1 Enabled - LTR Disabled
[   22.263509] iwlwifi 0000:0d:00.0: L1 Enabled - LTR Disabled
[   22.263607] iwlwifi 0000:0d:00.0: Radio type=0x2-0x2-0x1
[   22.322083] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   22.326240] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.670409] r8169 0000:07:00.0 eth0: link down
[   22.670465] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.820508] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   24.062620] wlan0: authenticate with 18:28:61:b9:f3:6b
[   24.065515] wlan0: send auth to 18:28:61:b9:f3:6b (try 1/3)
[   24.285082] wlan0: authenticated
[   24.288320] wlan0: associate with 18:28:61:b9:f3:6b (try 1/3)
[   24.294736] wlan0: RX AssocResp from 18:28:61:b9:f3:6b (capab=0x411 status=0 aid=2)
[   24.297820] wlan0: associated
[   24.297852] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  318.501920] systemd[1]: apt-daily.timer: Adding 51min 34.839349s random time.
[  323.372277] systemd[1]: apt-daily.timer: Adding 1h 43min 21.841675s random time.
[  323.935283] systemd[1]: apt-daily.timer: Adding 5h 48min 38.198622s random time.
[  324.054604] systemd[1]: apt-daily.timer: Adding 11h 14min 10.226501s random time.
[  324.303718] systemd[1]: apt-daily.timer: Adding 8h 49min 49.369749s random time.
[  324.715567] systemd[1]: apt-daily.timer: Adding 11h 4min 57.652767s random time.

[if]

@motorhead,

Kod Seç Genişlet


/dev/sda6: clean, 355773/1835008 files, 470404803/7335680 blocks


bir hatayı göstermiyor. Açılışta gördüğünüz her çıktı hatayı ifade etmez. Aldığınız hatayı yakalayıp buraya geçme imkânınız var mı?

Diskiniz ömrünü tamamlamak üzere gibi. Kaç senelik bu disk?

[motorhead]

[mention=631227]@if[/mention]

Hata kodlarını bilgisayara kaydetmenin bir yolunu söylerseniz tabii ki. Yoksa tek yapabileceğim ekranın fotoğrafını çekmek zaten bu şekilde de tüm hataları paylaşmak imkansız kodların çokluğu nedeniyle. Ayrıca bir daha ne zaman bu hatayı verir bilmiyorum. Belki 1-2 ay sonra.

Ben bu bilgisayarı Mayıs 2012'de aldım. Nisan 2014'de sabit diski bozuldu. Yeni bir sabit diskle değiştirdim, o zamandan beri aynı sabit diski kullanıyorum. Yaklaşık 3.5 yıl olmuş.

Bu arada başlangıçta gördüğüm şeyin hata olduğunu ben de sanmıyorum ama daha önceden çıkmıyordu böyle bir şey. Mesela sizlerde her açılışta bu kod çıkıyor mu?

[plazma]

https://ubuntuforums.org/showthread.php?t=2272486

Burdaki kullanicida ilk gordeldemi hatadan muzdaripmis diski degistirmis en son sorunun psu dan ciktigini anlamis sonlara dogru blog icin baglantida vermis tek tek bilesenlerin saglamligindan emin olmaniz lazim disk bellek vs sirasi ile test edin

[if]

[mention=631229]@motorhead[/mention]

/var/log/messages

dosyasının içine bakın.