Arch linux kapanmıyor

[trairz]

Arkadaşlar 1 yıldır linux kullanıcısıyım.Ubuntu ile başlayıp dağıtımları deneye deneye en son arch linuxa karar verdim.HP G250 model laptopumda hangi dağıtım olursa olsun bilgisayarı kapattığımda bash ekranında kalıyor hiç bir zaman bu sorunu çözemedim.Bilgisayarımda bluetooth var ama oda hiç çalışmıyor ama sorun değil.Bazı live dağıtımları laptopumda açtığımda kapanıyor ama kurulumunu kendim yaptığım linux sistemim kapanmyor.En son bash ekranda cgroup:remount is not allowed yazıyor.Sanırım sisteme bağlı olan sürücüleri remount edemiyor.Lazım olur diye https://pastebin.com/YNa2yeym < dmesg çıktısı ve https://pastebin.com/6raXZj6i < lspci çıktısını paylaşıyorum.Şimdiden teşekkürler iyi forumlar.

[decent]

Çıktıları kod etiketi içinde buraya
veya
https://paste.ubuntu.com/ adresine
yapıştırabilir misin ?

[akorukmez]

Tabikide buyrun.
dmesg çıktısı

Kod Seç Genişlet


[    0.000000] Linux version 4.11.9-1-ARCH (builduser@tobias) (gcc version 7.1.1 20170621 (GCC) ) #1 SMP PREEMPT Wed Jul 5 18:23:08 CEST 2017
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=7612b5f3-570d-4c72-9433-f86bb353fa2d rw quiet acpi=force
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000788a9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000788aa000-0x0000000079029fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007902a000-0x0000000079329fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007932a000-0x0000000079369fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007936a000-0x0000000079ffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a000000-0x000000007a7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007ae00000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP 250 G3 Notebook PC/2213, BIOS F.31 10/23/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 0FFB80000 mask FFFF80000 uncachable
[    0.000000]   2 base 000000000 mask F80000000 write-back
[    0.000000]   3 base 07C000000 mask FFC000000 uncachable
[    0.000000]   4 base 07B000000 mask FFF000000 uncachable
[    0.000000]   5 base 07AE00000 mask FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] BRK [0x01d42000, 0x01d42fff] PGTABLE
[    0.000000] BRK [0x01d43000, 0x01d43fff] PGTABLE
[    0.000000] BRK [0x01d44000, 0x01d44fff] PGTABLE
[    0.000000] BRK [0x01d45000, 0x01d45fff] PGTABLE
[    0.000000] BRK [0x01d46000, 0x01d46fff] PGTABLE
[    0.000000] BRK [0x01d47000, 0x01d47fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3735d000-0x379a5fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x0000000079369120 00008C (v01 HPQOEM SLIC-MPC 00000003      01000013)
[    0.000000] ACPI: FACP 0x0000000079366000 00010C (v05 HPQOEM SLIC-MPC 00000003 HP   00040000)
[    0.000000] ACPI: DSDT 0x0000000079354000 00D51C (v02 HPQOEM SLIC-MPC 00000003 HP   00040000)
[    0.000000] ACPI: FACS 0x00000000792F1000 000040
[    0.000000] ACPI: UEFI 0x0000000079368000 000236 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: HPET 0x0000000079365000 000038 (v01 HPQOEM INSYDE   00000003 HP   00040000)
[    0.000000] ACPI: LPIT 0x0000000079364000 000104 (v01 HPQOEM INSYDE   00000003 HP   00040000)
[    0.000000] ACPI: APIC 0x0000000079363000 000084 (v03 HPQOEM SLIC-MPC 00000003 HP   00040000)
[    0.000000] ACPI: MCFG 0x0000000079362000 00003C (v01 HPQOEM INSYDE   00000003 HP   00040000)
[    0.000000] ACPI: SSDT 0x0000000079352000 000763 (v01 HPQOEM INSYDE   00003000 HP   00040000)
[    0.000000] ACPI: SSDT 0x0000000079351000 000290 (v01 HPQOEM INSYDE   00003000 HP   00040000)
[    0.000000] ACPI: SSDT 0x0000000079350000 00017A (v01 HPQOEM INSYDE   00003000 HP   00040000)
[    0.000000] ACPI: UEFI 0x000000007934F000 000042 (v01 HPQOEM INSYDE   00000000 HP   00040000)
[    0.000000] ACPI: SSDT 0x0000000079348000 0064D9 (v01 HPQOEM INSYDE   00001000 HP   00040000)
[    0.000000] ACPI: SSDT 0x0000000079347000 00059A (v01 HPQOEM INSYDE   00001000 HP   00040000)
[    0.000000] ACPI: FPDT 0x0000000079346000 000044 (v01 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000079ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x79ffa000-0x79ffefff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x0000000079ffffff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020100000-0x00000000788a9fff]
[    0.000000]   node   0: [mem 0x000000007936a000-0x0000000079ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000079ffffff]
[    0.000000] On node 0 totalpages: 496605
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7744 pages used for memmap
[    0.000000]   DMA32 zone: 492608 pages, LIFO batch:31
[    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.000000] Reserving Intel graphics memory at 0x000000007b000000-0x000000007effffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x788aa000-0x79029fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7902a000-0x79329fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7932a000-0x79369fff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff880079c00000 s103256 r8192 d31912 u524288
[    0.000000] pcpu-alloc: s103256 r8192 d31912 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 488776
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=7612b5f3-570d-4c72-9433-f86bb353fa2d rw quiet acpi=force
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1932884K/1986420K available (6485K kernel code, 1091K rwdata, 2020K rodata, 1304K init, 904K bss, 53536K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Build-time adjustment of leaf fanout to 64.
[    0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:8448 nr_irqs:1024 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.003333] tsc: Detected 2165.800 MHz processor
[    0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4333.08 BogoMIPS (lpj=7219333)
[    0.003333] pid_max: default: 32768 minimum: 301
[    0.003333] ACPI: Core revision 20170119
[    0.026227] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.026285] Security Framework initialized
[    0.026289] Yama: becoming mindful.
[    0.026481] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.027367] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.027803] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.027817] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.028179] CPU: Physical Processor ID: 0
[    0.028182] CPU: Processor Core ID: 0
[    0.028187] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.028189] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.028197] mce: CPU supports 6 MCE banks
[    0.028212] process: using mwait in idle threads
[    0.028217] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.028219] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.028459] Freeing SMP alternatives memory: 24K
[    0.030015] ftrace: allocating 25552 entries in 100 pages
[    0.040165] smpboot: Max logical packages: 2
[    0.041134] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.075234] TSC deadline timer enabled
[    0.075237] smpboot: CPU0: Intel(R) Celeron(R) CPU  N2840  @ 2.16GHz (family: 0x6, model: 0x37, stepping: 0x8)
[    0.086682] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.086701] ... version:                3
[    0.086702] ... bit width:              40
[    0.086703] ... generic registers:      2
[    0.086705] ... value mask:             000000ffffffffff
[    0.086706] ... max period:             0000007fffffffff
[    0.086707] ... fixed-purpose events:   3
[    0.086708] ... event mask:             0000000700000003
[    0.106884] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.113340] smp: Bringing up secondary CPUs ...
[    0.140028] x86: Booting SMP configuration:
[    0.140031] .... node  #0, CPUs:      #1
[    0.223434] smp: Brought up 1 node, 2 CPUs
[    0.223434] smpboot: Total of 2 processors activated (8669.15 BogoMIPS)
[    0.223668] sched_clock: Marking stable (223333311, 0)->(232256039, -8922728)
[    0.224133] devtmpfs: initialized
[    0.224249] x86/mm: Memory block size: 128MB
[    0.230633] PM: Registering ACPI NVS region [mem 0x7902a000-0x79329fff] (3145728 bytes)
[    0.230799] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.230816] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.230930] pinctrl core: initialized pinctrl subsystem
[    0.230980] RTC time: 18:00:44, date: 07/30/17
[    0.231166] NET: Registered protocol family 16
[    0.231528] cpuidle: using governor ladder
[    0.231584] cpuidle: using governor menu
[    0.231588] PCCT header not found.
[    0.231623] ACPI: bus type PCI registered
[    0.231626] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.231737] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.231756] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.231766] PCI: Using configuration type 1 for base access
[    0.233149] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.233594] ACPI: Added _OSI(Module Device)
[    0.233596] ACPI: Added _OSI(Processor Device)
[    0.233597] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.233599] ACPI: Added _OSI(Processor Aggregator Device)
[    0.241467] ACPI Error: [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
[    0.241487] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0.IPCL] (Node ffff8800764c2460), AE_NOT_FOUND (20170119/psparse-543)
[    0.241508] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0.PCLK] (Node ffff8800764c2b40), AE_NOT_FOUND (20170119/psparse-543)
[    0.241525] ACPI Error: Method parse/execution failed [\_SB.TBSW] (Node ffff8800764c2eb0), AE_NOT_FOUND (20170119/psparse-543)
[    0.241541] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._Q1D] (Node ffff8800764c20f0), AE_NOT_FOUND (20170119/psparse-543)
[    0.241558] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff8800764be168), AE_NOT_FOUND (20170119/psparse-543)
[    0.241830] ACPI Error: [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
[    0.241845] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0.IPCL] (Node ffff8800764c2460), AE_NOT_FOUND (20170119/psparse-543)
[    0.241863] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0.PCLK] (Node ffff8800764c2b40), AE_NOT_FOUND (20170119/psparse-543)
[    0.241881] ACPI Error: Method parse/execution failed [\_SB.TBSW] (Node ffff8800764c2eb0), AE_NOT_FOUND (20170119/psparse-543)
[    0.241896] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._Q1D] (Node ffff8800764c20f0), AE_NOT_FOUND (20170119/psparse-543)
[    0.241913] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff8800764be168), AE_NOT_FOUND (20170119/psparse-543)
[    0.244902] ACPI: Dynamic OEM Table Load:
[    0.244914] ACPI: SSDT 0xFFFF880075EB0800 00045B (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    0.245339] ACPI: Dynamic OEM Table Load:
[    0.245349] ACPI: SSDT 0xFFFF880075EB2000 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.246195] ACPI: Dynamic OEM Table Load:
[    0.246204] ACPI: SSDT 0xFFFF880075EFCC00 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
[    0.246588] ACPI: Dynamic OEM Table Load:
[    0.246597] ACPI: SSDT 0xFFFF88007649DCC0 00008D (v01 PmRef  ApCst    00003000 INTL 20130117)
[    0.247809] ACPI : EC: EC started
[    0.247810] ACPI : EC: interrupt blocked
[    0.887177] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.887182] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.887185] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.887186] ACPI: Interpreter enabled
[    0.887229] ACPI: (supports S0 S3 S4 S5)
[    0.887231] ACPI: Using IOAPIC for interrupt routing
[    0.887288] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.013118] ACPI: Power Resource [USBC] (on)
[    1.019469] ACPI: Power Resource [PLPE] (on)
[    1.019896] ACPI: Power Resource [PLPE] (on)
[    1.028421] ACPI: Power Resource [CLK0] (on)
[    1.028498] ACPI: Power Resource [CLK1] (on)
[    1.111213] ACPI: Power Resource [FN00] (off)
[    1.111437] ACPI: Power Resource [FN01] (off)
[    1.111640] ACPI: Power Resource [FN02] (off)
[    1.111833] ACPI: Power Resource [FN03] (off)
[    1.112036] ACPI: Power Resource [FN04] (off)
[    1.113177] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.113187] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.113800] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    1.113822] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    1.114400] PCI host bridge to bus 0000:00
[    1.114405] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    1.114408] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    1.114410] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    1.114413] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.114415] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.114418] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    1.114420] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    1.114422] pci_bus 0000:00: root bus resource [mem 0x80000000-0x90affffe window]
[    1.114425] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.114437] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    1.114606] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    1.114619] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[    1.114630] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[    1.114641] pci 0000:00:02.0: reg 0x20: [io  0x2050-0x2057]
[    1.114813] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
[    1.114831] pci 0000:00:13.0: reg 0x10: [io  0x2048-0x204f]
[    1.114841] pci 0000:00:13.0: reg 0x14: [io  0x205c-0x205f]
[    1.114850] pci 0000:00:13.0: reg 0x18: [io  0x2040-0x2047]
[    1.114859] pci 0000:00:13.0: reg 0x1c: [io  0x2058-0x205b]
[    1.114869] pci 0000:00:13.0: reg 0x20: [io  0x2020-0x203f]
[    1.114878] pci 0000:00:13.0: reg 0x24: [mem 0x90a1f000-0x90a1f7ff]
[    1.114927] pci 0000:00:13.0: PME# supported from D3hot
[    1.115095] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[    1.115114] pci 0000:00:14.0: reg 0x10: [mem 0x90a00000-0x90a0ffff 64bit]
[    1.115177] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    1.115286] pci 0000:00:14.0: System wakeup disabled by ACPI
[    1.115354] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    1.115379] pci 0000:00:1a.0: reg 0x10: [mem 0x90900000-0x909fffff]
[    1.115392] pci 0000:00:1a.0: reg 0x14: [mem 0x90800000-0x908fffff]
[    1.115497] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    1.115636] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[    1.115658] pci 0000:00:1b.0: reg 0x10: [mem 0x90a10000-0x90a13fff 64bit]
[    1.115732] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.115866] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[    1.115931] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.116014] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    1.116073] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
[    1.116137] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.116228] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    1.116286] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
[    1.116350] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.116437] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    1.116495] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
[    1.116559] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.116641] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    1.116711] pci 0000:00:1d.0: [8086:0f34] type 00 class 0x0c0320
[    1.116736] pci 0000:00:1d.0: reg 0x10: [mem 0x90a18000-0x90a183ff]
[    1.116853] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.116976] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    1.117038] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    1.117239] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[    1.117273] pci 0000:00:1f.3: reg 0x10: [mem 0x90a19000-0x90a1901f]
[    1.117354] pci 0000:00:1f.3: reg 0x20: [io  0x2000-0x201f]
[    1.117638] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.117735] pci 0000:02:00.0: [1814:3290] type 00 class 0x028000
[    1.117756] pci 0000:02:00.0: reg 0x10: [mem 0x90710000-0x9071ffff]
[    1.117880] pci 0000:02:00.0: PME# supported from D0 D3hot
[    1.117929] pci 0000:02:00.0: System wakeup disabled by ACPI
[    1.117996] pci 0000:02:00.1: [1814:3298] type 00 class 0x0d1100
[    1.118017] pci 0000:02:00.1: reg 0x10: [mem 0x90700000-0x9070ffff]
[    1.118140] pci 0000:02:00.1: supports D1
[    1.118143] pci 0000:02:00.1: PME# supported from D0 D1 D3hot
[    1.127357] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    1.127363] pci 0000:00:1c.1:   bridge window [mem 0x90700000-0x907fffff]
[    1.127477] pci 0000:03:00.0: [10ec:5229] type 00 class 0xff0000
[    1.127507] pci 0000:03:00.0: reg 0x10: [mem 0x90600000-0x90600fff]
[    1.127656] pci 0000:03:00.0: supports D1 D2
[    1.127659] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[    1.127718] pci 0000:03:00.0: System wakeup disabled by ACPI
[    1.137362] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    1.137368] pci 0000:00:1c.2:   bridge window [mem 0x90600000-0x906fffff]
[    1.137481] pci 0000:04:00.0: [10ec:8136] type 00 class 0x020000
[    1.137511] pci 0000:04:00.0: reg 0x10: [io  0x1000-0x10ff]
[    1.137543] pci 0000:04:00.0: reg 0x18: [mem 0x90500000-0x90500fff 64bit]
[    1.137566] pci 0000:04:00.0: reg 0x20: [mem 0x90400000-0x90403fff 64bit pref]
[    1.137675] pci 0000:04:00.0: supports D1 D2
[    1.137677] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.137780] pci 0000:04:00.0: System wakeup disabled by ACPI
[    1.147376] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    1.147380] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    1.147384] pci 0000:00:1c.3:   bridge window [mem 0x90500000-0x905fffff]
[    1.147390] pci 0000:00:1c.3:   bridge window [mem 0x90400000-0x904fffff 64bit pref]
[    1.208085] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    1.208213] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.208338] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    1.208463] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.208588] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.208712] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.208837] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.208961] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    1.212796] ACPI: Enabled 8 GPEs in block 00 to 3F
[    1.213030] ACPI Warning: GPE type mismatch (level/edge) (20170119/evxface-826)
[    1.213036] ACPI : EC: interrupt unblocked
[    1.213042] ACPI : EC: event unblocked
[    1.213051] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    1.213054] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    1.244348] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[    1.244455] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    1.244458] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.244467] pci 0000:00:02.0: vgaarb: bridge control possible
[    1.244468] vgaarb: loaded
[    1.244660] PCI: Using ACPI for IRQ routing
[    1.246034] PCI: pci_cache_line_size set to 64 bytes
[    1.246110] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    1.246112] e820: reserve RAM buffer [mem 0x788aa000-0x7bffffff]
[    1.246114] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[    1.246269] NetLabel: Initializing
[    1.246271] NetLabel:  domain hash size = 128
[    1.246272] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.246301] NetLabel:  unlabeled traffic allowed by default
[    1.246423] clocksource: Switched to clocksource refined-jiffies
[    1.263926] VFS: Disk quotas dquot_6.6.0
[    1.263961] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.264123] pnp: PnP ACPI init
[    1.264236] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.264392] system 00:01: [io  0x0680-0x069f] has been reserved
[    1.264396] system 00:01: [io  0x0400-0x047f] has been reserved
[    1.264399] system 00:01: [io  0x0500-0x05fe] has been reserved
[    1.264401] system 00:01: [io  0x0600-0x061f] has been reserved
[    1.264405] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    1.264411] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.264594] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.264659] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.264723] pnp 00:04: Plug and Play ACPI device, IDs SYN1eae PNP0f13 (active)
[    1.328067] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
[    1.328071] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
[    1.328073] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
[    1.328076] system 00:05: [mem 0xfed04000-0xfed04fff] has been reserved
[    1.328079] system 00:05: [mem 0xfed0c000-0xfed0ffff] could not be reserved
[    1.328082] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[    1.328085] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    1.328088] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.328091] system 00:05: [mem 0xfef00000-0xfeffffff] has been reserved
[    1.328096] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.330105] pnp: PnP ACPI: found 6 devices
[    1.337963] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.337985] clocksource: Switched to clocksource acpi_pm
[    1.338007] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    1.338012] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    1.338015] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    1.338025] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    1.338029] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    1.338037] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    1.338041] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    1.338067] pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
[    1.338071] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
[    1.338079] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    1.338082] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    1.338090] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    1.338092] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    1.338100] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    1.338103] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    1.338108] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
[    1.338113] pci 0000:00:1c.1: BAR 13: assigned [io  0x4000-0x4fff]
[    1.338117] pci 0000:00:1c.2: BAR 13: assigned [io  0x5000-0x5fff]
[    1.338127] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    1.338130] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    1.338138] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    1.338140] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    1.338145] pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
[    1.338148] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
[    1.338155] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    1.338158] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    1.338162] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.338166] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.338176] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    1.338179] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    1.338184] pci 0000:00:1c.1:   bridge window [mem 0x90700000-0x907fffff]
[    1.338191] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    1.338194] pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
[    1.338199] pci 0000:00:1c.2:   bridge window [mem 0x90600000-0x906fffff]
[    1.338206] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    1.338209] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    1.338214] pci 0000:00:1c.3:   bridge window [mem 0x90500000-0x905fffff]
[    1.338218] pci 0000:00:1c.3:   bridge window [mem 0x90400000-0x904fffff 64bit pref]
[    1.338225] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    1.338228] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    1.338230] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    1.338232] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    1.338235] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    1.338237] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    1.338240] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    1.338242] pci_bus 0000:00: resource 11 [mem 0x80000000-0x90affffe window]
[    1.338245] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    1.338248] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    1.338250] pci_bus 0000:02: resource 1 [mem 0x90700000-0x907fffff]
[    1.338253] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    1.338255] pci_bus 0000:03: resource 1 [mem 0x90600000-0x906fffff]
[    1.338258] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    1.338260] pci_bus 0000:04: resource 1 [mem 0x90500000-0x905fffff]
[    1.338262] pci_bus 0000:04: resource 2 [mem 0x90400000-0x904fffff 64bit pref]
[    1.338437] NET: Registered protocol family 2
[    1.338684] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    1.338749] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    1.338824] TCP: Hash tables configured (established 16384 bind 16384)
[    1.338886] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    1.338907] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    1.338999] NET: Registered protocol family 1
[    1.339028] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    3.002023] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    3.004198] PCI: CLS 64 bytes, default 64
[    3.004299] Unpacking initramfs...
[    3.157046] Freeing initrd memory: 6436K
[    3.157105] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1f37ff50e1e, max_idle_ns: 440795224014 ns
[    3.157151] clocksource: Switched to clocksource tsc
[    3.157237] Scanning for low memory corruption every 60 seconds
[    3.158168] Initialise system trusted keyrings
[    3.158277] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[    3.160430] zbud: loaded
[    3.161540] Key type asymmetric registered
[    3.161566] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    3.161616] io scheduler noop registered
[    3.161618] io scheduler deadline registered
[    3.161668] io scheduler cfq registered (default)
[    3.161670] io scheduler mq-deadline registered
[    3.162577] efifb: probing for efifb
[    3.162583] efifb: framebuffer at 0xa0000, using 64k, total 64k
[    3.162585] efifb: mode is 640x480x1, linelength=80, pages=1
[    3.162586] efifb: scrolling: redraw
[    3.162588] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    3.165103] Console: switching to colour frame buffer device 80x30
[    3.167477] fb0: EFI VGA frame buffer device
[    3.167492] intel_idle: MWAIT substates: 0x33000020
[    3.167494] intel_idle: v0.4.1 model 0x37
[    3.167631] intel_idle: lapic_timer_reliable_states 0xffffffff
[    3.169868] GHES: HEST is not enabled!
[    3.170013] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.190284] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.191441] hpet: number irqs doesn't agree with number of timers
[    3.191492] Linux agpgart interface v0.103
[    3.191915] rtc_cmos 00:00: RTC can wake from S4
[    3.192217] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    3.192247] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[    3.192263] intel_pstate: Intel P-state driver initializing
[    3.192666] ledtrig-cpu: registered to indicate activity on CPUs
[    3.194293] NET: Registered protocol family 10
[    3.211824] Segment Routing with IPv6
[    3.211875] NET: Registered protocol family 17
[    3.212619] microcode: sig=0x30678, pf=0x8, revision=0x829
[    3.212844] microcode: Microcode Update Driver: v2.2.
[    3.213738] registered taskstats version 1
[    3.213767] Loading compiled-in X.509 certificates
[    3.213802] zswap: loaded using pool lzo/zbud
[    3.214550]   Magic number: 9:133:40
[    3.214798] rtc_cmos 00:00: setting system clock to 2017-07-30 18:00:47 UTC (1501437647)
[    3.214935] PM: Hibernation image not present or could not be loaded.
[    3.218232] Freeing unused kernel memory: 1304K
[    3.218237] Write protecting the kernel read-only data: 10240k
[    3.219603] Freeing unused kernel memory: 1692K
[    3.220002] Freeing unused kernel memory: 28K
[    3.350755] sdhci: Secure Digital Host Controller Interface driver
[    3.350758] sdhci: Copyright(c) Pierre Ossman
[    3.367122] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    3.380514] SCSI subsystem initialized
[    3.382214] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.382296] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.387548] ACPI: bus type USB registered
[    3.387586] usbcore: registered new interface driver usbfs
[    3.387602] usbcore: registered new interface driver hub
[    3.387660] usbcore: registered new device driver usb
[    3.388050] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 87
[    3.388862] libata version 3.00 loaded.
[    3.390487] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.390500] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    3.391596] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    3.391601] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    3.392273] hub 1-0:1.0: USB hub found
[    3.392291] hub 1-0:1.0: 6 ports detected
[    3.392897] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.393120] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.393139] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    3.393187] ehci-pci: EHCI PCI platform driver
[    3.393437] hub 2-0:1.0: USB hub found
[    3.393670] hub 2-0:1.0: 1 port detected
[    3.395905] ahci 0000:00:13.0: version 3.0
[    3.396082] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
[    3.406385] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    3.406390] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso
[    3.406888] scsi host0: ahci
[    3.407053] scsi host1: ahci
[    3.407124] ata1: SATA max UDMA/133 abar m2048@0x90a1f000 port 0x90a1f100 irq 89
[    3.407127] ata2: SATA max UDMA/133 abar m2048@0x90a1f000 port 0x90a1f180 irq 89
[    3.407413] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    3.407422] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    3.407439] ehci-pci 0000:00:1d.0: debug port 2
[    3.411580] ehci-pci 0000:00:1d.0: can't setup: -110
[    3.411676] ehci-pci 0000:00:1d.0: USB bus 3 deregistered
[    3.411846] ehci-pci 0000:00:1d.0: init 0000:00:1d.0 fail, -110
[    3.411950] ehci-pci: probe of 0000:00:1d.0 failed with error -110
[    3.441928] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.712485] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[    3.719948] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.720001] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.722057] ata1.00: ATA-8: HGST HTS545050A7E680, GG2OAH10, max UDMA/100
[    3.722128] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.724151] ata1.00: configured for UDMA/100
[    3.724606] ata2.00: ATAPI: hp       DVDRW  GUB0N, UB00, max UDMA/133
[    3.729042] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS545050A7 AH10 PQ: 0 ANSI: 5
[    3.731737] ata2.00: configured for UDMA/133
[    3.774172] scsi 1:0:0:0: CD-ROM            hp       DVDRW  GUB0N     UB00 PQ: 0 ANSI: 5
[    3.799231] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    3.799246] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.799363] sd 0:0:0:0: [sda] Write Protect is off
[    3.799377] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.799426] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.815793] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.815799] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.816348] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.854698] hidraw: raw HID events driver (C) Jiri Kosina
[    3.858808] usbcore: registered new interface driver usbhid
[    3.858811] usbhid: USB HID core driver
[    3.881531]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[    3.883578] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.965419] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[    4.150016] hub 1-3:1.0: USB hub found
[    4.150080] hub 1-3:1.0: 4 ports detected
[    4.150934] usb: port power management may be unreliable
[    4.265403] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[    4.355886] random: fast init done
[    5.443306] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    6.534744] random: crng init done
[    6.760794] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.849525] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    6.850457] systemd[1]: Detected architecture x86-64.
[    6.864105] systemd[1]: Set hostname to <arch>.
[    8.089255] systemd[1]: Created slice System Slice.
[    8.090441] systemd[1]: Mounting Huge Pages File System...
[    8.090809] systemd[1]: Created slice User and Session Slice.
[    8.090852] systemd[1]: Reached target Login Prompts.
[    8.090942] systemd[1]: Listening on LVM2 metadata daemon socket.
[    8.091242] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.091383] systemd[1]: Listening on Journal Socket.
[    8.256292] EXT4-fs (sda7): re-mounted. Opts: data=ordered
[    8.493161] systemd-journald[149]: Received request to flush runtime journal from PID 1
[   10.712344] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[   10.712351] ACPI: Power Button [PWRB]
[   10.712509] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[   10.712543] ACPI: Lid Switch [LID0]
[   10.712616] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   10.712620] ACPI: Power Button [PWRF]
[   11.041004] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.408180] Bluetooth: Core ver 2.22
[   11.408207] NET: Registered protocol family 31
[   11.408209] Bluetooth: HCI device and connection manager initialized
[   11.408214] Bluetooth: HCI socket layer initialized
[   11.408217] Bluetooth: L2CAP socket layer initialized
[   11.408228] Bluetooth: SCO socket layer initialized
[   11.428787] ACPI: Battery Slot [BAT1] (battery absent)
[   11.453687] Bluetooth: HCI UART driver ver 2.3
[   11.453691] Bluetooth: HCI UART protocol H4 registered
[   11.453692] Bluetooth: HCI UART protocol BCSP registered
[   11.453693] Bluetooth: HCI UART protocol LL registered
[   11.453694] Bluetooth: HCI UART protocol ATH3K registered
[   11.453695] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   11.453750] Bluetooth: HCI UART protocol Intel registered
[   11.453772] Bluetooth: HCI UART protocol Broadcom registered
[   11.453774] Bluetooth: HCI UART protocol QCA registered
[   11.453775] Bluetooth: HCI UART protocol AG6XX registered
[   11.453776] Bluetooth: HCI UART protocol Marvell registered
[   11.474163] wmi: Mapper loaded
[   11.526317] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   11.526447] thermal LNXTHERM:00: registered as thermal_zone0
[   11.526449] ACPI: Thermal Zone [TZ00] (44 C)
[   11.527039] thermal LNXTHERM:01: registered as thermal_zone1
[   11.527041] ACPI: Thermal Zone [TZ01] (50 C)
[   11.528775] thermal LNXTHERM:02: registered as thermal_zone2
[   11.528778] ACPI: Thermal Zone [TZ02] (28 C)
[   11.770125] ACPI: AC Adapter [ACAD] (on-line)
[   11.904857] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   11.943764] Initializing HPQ6001 module
[   11.943882] input: HP Wireless hotkeys as /devices/virtual/input/input5
[   12.033502] input: USB OPTICAL MOUSE  as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:2188:0AE1.0001/input/input6
[   12.033590] hid-generic 0003:2188:0AE1.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:14.0-1/input0
[   12.213174] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   12.584116] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[   12.592157] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[   12.820010] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   12.820024] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[   12.820608] r8169 0000:04:00.0 eth0: RTL8106e at 0xffffc900003c9000, 38:63:bb:e0:99:23, XID 04900000 IRQ 91
[   13.034412] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   13.034490] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   13.034550] intel_soc_dts_thermal: request_threaded_irq ret -22
[   13.069975] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   13.070049] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   13.070112] intel_soc_dts_thermal: request_threaded_irq ret -22
[   13.111809] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.182117] psmouse serio1: synaptics: queried max coordinates: x [..5696], y [..4884]
[   13.201433] intel_rapl: Found RAPL domain package
[   13.201437] intel_rapl: Found RAPL domain core
[   13.217898] iTCO_vendor_support: vendor-support=0
[   13.223217] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   13.223263] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1044..]
[   13.223327] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[   13.223543] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   13.227278] mousedev: PS/2 mouse device common for all mice
[   13.297875] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1c0b1, caps: 0xf00133/0x240000/0xa2400/0x0, board id: 2665, fw id: 1458825
[   13.346139] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   13.680092] media: Linux media interface: v0.10
[   13.711677] Linux video capture interface: v2.00
[   13.786467] [drm] Memory usable by graphics device = 2048M
[   13.786472] checking generic (a0000 10000) vs hw (80000000 10000000)
[   13.786473] fb: switching to inteldrmfb from EFI VGA
[   13.786509] Console: switching to colour dummy device 80x25
[   13.786634] [drm] Replacing VGA console driver
[   13.786744] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   13.786745] [drm] Driver supports precise vblank timestamp query.
[   13.787233] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   13.801321] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0
[   13.802551] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   13.803999] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[   13.804215] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   13.825751] fbcon: inteldrmfb (fb0) is primary device
[   13.907226] input: HP WMI hotkeys as /devices/virtual/input/input9
[   13.929789] Adding 4194300k swap on /dev/sda6.  Priority:-1 extents:1 across:4194300k FS
[   14.001945] r8169 0000:04:00.0 enp4s0: renamed from eth0
[   14.042591] rt2800pci 0000:02:00.0 wlp2s0f0: renamed from wlan0
[   14.064908] uvcvideo: Found UVC 1.00 device HP Webcam (064e:9320)
[   14.070849] uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!
[   14.070852] uvcvideo 1-4:1.0: Entity type for entity Extension 7 was not initialized!
[   14.070854] uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized!
[   14.070855] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
[   14.070970] input: HP Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input11
[   14.071071] usbcore: registered new interface driver uvcvideo
[   14.071072] USB Video Class driver (1.1.1)
[   14.154076] fuse init (API version 7.26)
[   15.017988] Console: switching to colour frame buffer device 170x48
[   15.043195] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   15.310820] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   15.310825] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.310827] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   15.310829] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   15.310831] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   15.310834] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[   15.310836] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   15.400256] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   15.400376] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   15.400490] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   15.527172] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: stripe=4,data=ordered
[   20.416607] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   20.663524] r8169 0000:04:00.0 enp4s0: link down
[   20.663650] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   20.751041] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[   20.751143] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[   20.768235] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[   20.900358] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[   21.036420] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[   22.069255] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[  364.190820] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[  679.210279] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[  994.191233] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[ 1309.148381] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[ 1624.197504] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[ 1939.196843] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[ 2254.193564] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[ 2569.150788] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[ 2884.190603] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[ 3199.194033] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[ 3514.191572] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[ 3521.140770] IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0: link is not ready
[ 3522.222306] wlp2s0f0: authenticate with e8:37:7a:de:ed:41
[ 3522.225103] wlp2s0f0: send auth to e8:37:7a:de:ed:41 (try 1/3)
[ 3522.226687] wlp2s0f0: authenticated
[ 3522.231616] wlp2s0f0: associate with e8:37:7a:de:ed:41 (try 1/3)
[ 3522.234812] wlp2s0f0: RX AssocResp from e8:37:7a:de:ed:41 (capab=0x411 status=0 aid=1)
[ 3522.234885] wlp2s0f0: associated
[ 3522.234939] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0f0: link becomes ready

lspci çıktısı

Kod Seç Genişlet

00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register (rev 0e)
00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0e)
00:13.0 SATA controller: Intel Corporation Atom Processor E3800 Series SATA AHCI Controller (rev 0e)
00:14.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI (rev 0e)
00:1a.0 Encryption controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine (rev 0e)
00:1b.0 Audio device: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller (rev 0e)
00:1c.0 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 1 (rev 0e)
00:1c.1 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 2 (rev 0e)
00:1c.2 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 3 (rev 0e)
00:1c.3 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 4 (rev 0e)
00:1d.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series USB EHCI (rev 0e)
00:1f.0 ISA bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit (rev 0e)
00:1f.3 SMBus: Intel Corporation Atom Processor E3800 Series SMBus Controller (rev 0e)
02:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
02:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 07)


[mhmtkrktr]

Şu çıktıyıda ekleyebilirmisin.

Kod Seç Genişlet

journalctl -p err..alert

Ayrıca şunları da deneyelim, çözüm olmazsa çıktıya göre tekrar bakarız.

Kod Seç Genişlet

sudo nano -t /etc/mkinitcpio.conf
Dosya içerisinde ki, başında diyez (#) olmayan HOOK= satırını bul ve sonuna shutdown ekle.
Yani örnek olarak şu şekilde olsun.

Kod Seç Genişlet

HOOKS="base udev autodetect modconf block filesystems keyboard shutdown"
F2 ile çıkış yap ve şu komutu çalıştır.

Kod Seç Genişlet

sudo mkinitcpio -p linux$(if grep lts <<<$(uname -r) &>0; then echo -lts; fi)


Önyükleyici olarak grub kullanıyorsan,

Kod Seç Genişlet

sudo nano -t /etc/default/grub
ilgili satırı bul ve systemd.legacy_systemd_cgroup_controller=true şeklinde ekleme yap.

Kod Seç Genişlet

GRUB_CMDLINE_LINUX_DEFAULT="quiet systemd.legacy_systemd_cgroup_controller=true"
Sonrasında,

Kod Seç Genişlet

sudo grub-mkconfig -o /boot/grub/grub.cfg
# sudo systemctl --no-wall reboot

[trairz]

Şu çıktıyıda ekleyebilirmisin.

Kod Seç Genişlet

journalctl -p err..alert

Ayrıca şunları da deneyelim, çözüm olmazsa çıktıya göre tekrar bakarız.

Kod Seç Genişlet

sudo nano -t /etc/mkinitcpio.conf
Dosya içerisinde ki, başında diyez (#) olmayan HOOK= satırını bul ve sonuna shutdown ekle.
Yani örnek olarak şu şekilde olsun.

Kod Seç Genişlet

HOOKS="base udev autodetect modconf block filesystems keyboard shutdown"
F2 ile çıkış yap ve şu komutu çalıştır.

Kod Seç Genişlet

sudo mkinitcpio -p linux$(if grep lts <<<$(uname -r) &>0; then echo -lts; fi)


Önyükleyici olarak grub kullanıyorsan,

Kod Seç Genişlet

sudo nano -t /etc/default/grub
ilgili satırı bul ve systemd.legacy_systemd_cgroup_controller=true şeklinde ekleme yap.

Kod Seç Genişlet

GRUB_CMDLINE_LINUX_DEFAULT="quiet systemd.legacy_systemd_cgroup_controller=true"
Sonrasında,

Kod Seç Genişlet

sudo grub-mkconfig -o /boot/grub/grub.cfg
# sudo systemctl --no-wall reboot

Geç yazdığım için kusura bakmayın yazdığınız kodları uyguladıktan sonra
Unmounting all devices.Detaching loop devices.Disassembling stacked devices yazıyor bash ekranda.Sonra yine donuyor kapanmıyor aslında laptop kapanıyor ama ekran açık kalıyor manuel olarak kapattığımda ne harddiskten nede fandan ses geliyor bilgisayar çoktan kapanmış oluyor ama dediğim gibi ekran açık kalıyor sadece.İstediğiniz çıktıyı paylaşıyorum yardımınız için teşekkürler.

Kod Seç Genişlet

-- Logs begin at Thu 2017-07-20 18:11:21 UTC, end at Tue 2017-08-01 17:47:45 UTC. --
Tem 20 18:11:21 arch kernel: ACPI Error: [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
Tem 20 18:11:21 arch kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0.IPCL] (Node ffff8800764c2848), AE_NOT_FOUND (20170119/psp
Tem 20 18:11:21 arch kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0.PCLK] (Node ffff8800764c2e88), AE_NOT_FOUND (20170119/psp
Tem 20 18:11:21 arch kernel: ACPI Error: Method parse/execution failed [\_SB.TBSW] (Node ffff8800764c2230), AE_NOT_FOUND (20170119/psparse-543)
Tem 20 18:11:21 arch kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._Q1D] (Node ffff8800764c2cd0), AE_NOT_FOUND (20170119/psp
Tem 20 18:11:21 arch kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff8800764be1b8), AE_NOT_FOUND (20170119/psp
Tem 20 18:11:21 arch kernel: ACPI Error: [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
Tem 20 18:11:21 arch kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0.IPCL] (Node ffff8800764c2848), AE_NOT_FOUND (20170119/psp
Tem 20 18:11:21 arch kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0.PCLK] (Node ffff8800764c2e88), AE_NOT_FOUND (20170119/psp
Tem 20 18:11:21 arch kernel: ACPI Error: Method parse/execution failed [\_SB.TBSW] (Node ffff8800764c2230), AE_NOT_FOUND (20170119/psparse-543)
Tem 20 18:11:21 arch kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._Q1D] (Node ffff8800764c2cd0), AE_NOT_FOUND (20170119/psp
Tem 20 18:11:21 arch kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff8800764be1b8), AE_NOT_FOUND (20170119/psp
Tem 20 18:11:25 arch kernel: intel_soc_dts_thermal: request_threaded_irq ret -22
Tem 20 18:11:25 arch kernel: intel_soc_dts_thermal: request_threaded_irq ret -22
Tem 20 18:14:00 arch login[245]: pam_systemd(login:session): Failed to release session: Connection reset by peer
Tem 20 18:14:01 arch kernel: watchdog: watchdog0: watchdog did not stop!
-- Reboot --
Tem 20 18:14:25 arch kernel: ACPI Error: [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
Tem 20 18:14:25 arch kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0.IPCL] (Node ffff8800764c2e60), AE_NOT_FOUND (20170119/psp
Tem 20 18:14:25 arch kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0.PCLK] (Node ffff8800764c2550), AE_NOT_FOUND (20170119/psp
Tem 20 18:14:25 arch kernel: ACPI Error: Method parse/execution failed [\_SB.TBSW] (Node ffff8800764c2208), AE_NOT_FOUND (20170119/psparse-543)
Tem 20 18:14:25 arch kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._Q1D] (Node ffff8800764c2140), AE_NOT_FOUND (20170119/psp
Tem 20 18:14:25 arch kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff8800764be168), AE_NOT_FOUND (20170119/psp
lines 1-24


[mhmtkrktr]

Rica ederim. Benim acelem yok, konu senin ;-)
Son yazdığın mesajı daha önce alıyormuydun, yoksa benim söylediğim düzenlemeden sonramı oluştu?
Bu konu hakkında 2015 yılında bilinen genel dağıtımlar için başlıklar açılmış ve henüz bakabildiklerim arasında sorunun ne olduğu dahi anlaşılamamış. Bir kısmı BIOS güncellemesi ile düzeldi demiş, bazıları giriş yöneticisini değiştirdim düzeldi demiş. Çoğu da olumlu bir sonuç bulamamış. Systemd ile ilgili olduğu söyleniyor.
Benim grub'a eklettiğim ise, yine o dönemde çözüm oluşturmuş fakat sonraki güncellemelerde kernel için gerekli düzenlemenin yapıldığı söylenmiş.
Daha detaylı araştırabilmek için seninde biraz detay vermen iyi olur.
Örneğin:
Bu sorun ilk kurulumdan itibaren mi oluyor yoksa sonradan mı?
Sorunlu sistem yanında farklı bir işletim sistemi var mı?
Virtualbox vb sanallaştırma uygulaması kurulu mu?
Sürekli olarak SD kart vb harici bir medya bağlı kalıyor mu?
Bilgisayarın modeli nedir?

Kod Seç Genişlet

lspci -kv
lsusb -t
uname -r
fdisk -l
cat /etc/fstab
pacman -Qi systemd


Bu arada kernel değiştirerek deneyebilir misin? Lts ise Generic veya tam tersi olarak. Hâlâ çözüm sağlamamışsa daha önce söylediğim düzenlemeyi geri alabilirsin. İlave olarak, imkanın ve bilgin varsa BIOS versiyonunu da değiştirerek deneyebilirsin.

[trairz]

Kesinlikle sizin düzenlemenizden oluşan kaynaklı bir sorun değil sorunun tamamen bilgisayar donanımları veya işletim sistemiyle alakalı olduğunu düşünüyorum.Harddiskimin tamamı arch linux sistemi üzerine kurulu.BIOS güncellemesi mevcut HP G250 modele sahip laptopmun fakat linux sistem kullandığım için ve güncelleme de windowsa özel bir kurulum gerektirdiği için BIOS güncellemesi yapamadım fakat biraz daha detaylı araştırırsam yapabileceğime inanıyorum. Ki bu sorun ilk değil 1 veya 1.5 yıldan beri linux sistemleri kuruyorum bilgisayarıma her dağıtımda aynı sorun laptop kapanmıyor fişten yada bataryadan kapatıyorum malesef

[cokomoko]

Sanıyorum sizin sorununuzu çözmek için DSDT'yi düzenlemeniz lazım. Acpi olaylarıyla ilgili donanımınızın bir sorunu var. Burada anlatılıyor: https://wiki.archlinux.org/index.php/DSDT
Derlemeyi denemeden önce bağlantıda verilen acpi_osi=xxx parametlerini deneyin, olmazsa düzenleme olayına geçin.

Not: Bu arada konuyu wiki'ye bakarken gördüm ve Türkçe sonuçlar var mı diye bakarken bu konuyu buldum. Bu yüzden ben DSDT düzenlemesini denemedim, zaten acpi olaylarıyla ilgili sorunum da yok. Umarım sorunu çözersiniz.

[Bipolar_Disorder]

Arch Linux son kullanıcıya uygun bir dağıtım değildir.
Sorunu çözemiyorsan, Ubuntu ya dönmen senin açından daha uygun olacaktır.