Nvidia driver kurdum ama çalışmıyor herhalde

Başlatan Froneo, 08 Nisan 2017 - 12:35:19

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

Froneo

Hepinize merhabalar , ben yeni bir linux kullanıcısıyım ubuntu 16.04 lts kullanıyorum xfce kullanıyorum ve gnome kullanırken bilgisayar özelliklerinden birşey farkettim bilgisayarımın ram'i 6gb olmasına rağmen 5.7 görüyordu ve ekran kartınıda intel olarak görüyordu anladım ki nvidia kartımı tanımıyor ve onboard intel kartımı kullanıyor ve ona ramden 300 mb ayırıyor . bende internette driver kurulumu hakkında video izledim ve grub ekranından biryerlere girip nvidianın sitesinden indirmiş olduğum .run uzantılı driverı kurdum sanırım ama steam hata veriyor , ne yapabilirim bütün driverları otomatik güncelleyen bir program varmı ? yardımcı olursanız sevinirim

mendirec

Merhaba [mention=622439]@Froneo[/mention], şu konuda belirtilen çıktılara bakabilir miyiz?
https://forum.ubuntu-tr.net/index.php?topic=33412.0

Froneo

#2
lsb_release -a komutunun çıktısı

Distributor ID: Ubuntu
Description: Ubuntu 16.04.2 LTS
Release: 16.04
Codename: xenial


lspci -nnk | egrep "VGA|3D|Display" -A2 komutunun çıktısı


00:02.0 VGA compatible controller [0300]: Intel Corporation Broadwell-U Integrated Graphics [8086:1616] (rev 09)
Subsystem: Acer Incorporated [ALI] Broadwell-U Integrated Graphics [1025:0940]
Kernel driver in use: i915
--
04:00.0 3D controller [0302]: NVIDIA Corporation GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M] [10de:1140] (rev a1)
Subsystem: Acer Incorporated [ALI] GeForce 820M [1025:0941]
Kernel modules: nvidiafb, nouveau


glxinfo | grep render komutunun çıktısı


Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Error: couldn't find RGB GLX visual or fbconfig
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".



xrandr komutunun çıktısı

Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
eDP-1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
   1366x768      60.02*+
   1360x768      59.80    59.96 
   1024x768      60.04    60.00 
   960x720       60.00 
   928x696       60.05 
   896x672       60.01 
   960x600       60.00 
   960x540       59.99 
   800x600       60.00    60.32    56.25 
   840x525       60.01    59.88 
   800x512       60.17 
   700x525       59.98 
   640x512       60.02 
   720x450       59.89 
   640x480       60.00    59.94 
   680x384       59.80    59.96 
   576x432       60.06 
   512x384       60.00 
   400x300       60.32    56.34 
   320x240       60.05 
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
HDMI-2 disconnected (normal left inverted right x axis y axis)



dpkg -l | egrep "nvidia|bumblebee|nvidia-prime|fglrx" çıktısı
çıktı yok boş


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 08 Nisan 2017 - 14:09:20

Yardımcı olabilecek birileri varmı

mendirec

[mention=622445]@Froneo[/mention] Elimizden geldiğince yardımcı olmaya çalışıyoruz.
BIOS/UEFI üzerinden Secure Boot'u kapat lütfen. Daha sonra şu komutların çıktılarını buraya geç.
ubuntu-drivers list
lspci -nnk | egrep "VGA|3D|Display" -A2
glxinfo | grep render

Froneo

ubuntu-drivers list
intel-microcode

lspci -nnk | egrep "VGA|3D|Display" -A2
00:02.0 VGA compatible controller [0300]: Intel Corporation Broadwell-U Integrated Graphics [8086:1616] (rev 09)
Subsystem: Acer Incorporated [ALI] Broadwell-U Integrated Graphics [1025:0940]
Kernel driver in use: i915
--
04:00.0 3D controller [0302]: NVIDIA Corporation GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M] [10de:1140] (rev ff)
Kernel modules: nvidiafb, nouveau, nvidia_304


glxinfo | grep render
direct rendering: Yes
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
Extended renderer info (GLX_MESA_query_renderer):
OpenGL renderer string: Mesa DRI Intel(R) HD Graphics 5500 (Broadwell GT2)
    GL_ARB_compute_shader, GL_ARB_conditional_render_inverted,
    GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_packed_depth_stencil,
    GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
    GL_NV_blend_square, GL_NV_conditional_render, GL_NV_depth_clamp,
    GL_OES_element_index_uint, GL_OES_fbo_render_mipmap,


Linux kurduğuma pişman oldum ya steam de çıkan hatayı düzeltmek için bumblebee kurdum şimdide pc açılırken error veriyor birsürü .


mendirec

[mention=622457]@Froneo[/mention] Steam'da çıkan hatayı düzletmek için neden Bumblebee kuruyorsun? Çıktılara göre bir sorun gözükmüyor.
Sakin olursan sorununu çözebiliriz. Şu çıktıya bakalım.
dpkg -l | egrep "nvidia|bumblebee|nvidia-prime|fglrx"

Froneo

çıktı
ii  bumblebee                                   3.2.1-10                                      amd64        NVIDIA Optimus support for Linux
ii  bumblebee-nvidia                            3.2.1-10                                      amd64        NVIDIA Optimus support using the proprietary NVIDIA driver
ii  nvidia-304                                  304.135-0ubuntu0.16.04.1                      amd64        NVIDIA legacy binary driver - version 304.135
ii  nvidia-current                              304.135-0ubuntu0.16.04.1                      amd64        Transitional package for nvidia-current
ii  nvidia-opencl-icd-304                       304.135-0ubuntu0.16.04.1                      amd64        NVIDIA OpenCL ICD
ii  nvidia-settings                             361.42-0ubuntu1                               amd64        Tool for configuring the NVIDIA graphics driver

ata1

Linux gönül işi sabır ve öğrenme hevesi ister. Biraz araştırma biraz yardım alarak düzeltebilirsin.

Alıntı YapLinux kurduğuma pişman oldum ya steam de çıkan hatayı düzeltmek için bumblebee kurdum şimdide pc açılırken error veriyor birsürü .


mendirec

[mention=622463]@Froneo[/mention] Kurulu paketleri kaldır.
sudo apt purge nvidia* bumblebee*

Bilgisayarı yeniden başlat ve tekrar şu komutların çıktılarını buraya geç lütfen.
dpkg -l | egrep "nvidia|bumblebee|nvidia-prime|fglrx"
ubuntu-drivers list
glxinfo | grep render

Froneo

dpkg -l | egrep "nvidia|bumblebee|nvidia-prime|fglrx"
çıktısı yok

ubuntu-drivers list
intel-microcode

glxinfo | grep render
direct rendering: Yes
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
Extended renderer info (GLX_MESA_query_renderer):
OpenGL renderer string: Mesa DRI Intel(R) HD Graphics 5500 (Broadwell GT2)
    GL_ARB_compute_shader, GL_ARB_conditional_render_inverted,
    GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_packed_depth_stencil,
    GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
    GL_NV_blend_square, GL_NV_conditional_render, GL_NV_depth_clamp,
    GL_OES_element_index_uint, GL_OES_fbo_render_mipmap,




mendirec

[mention=622467]@Froneo[/mention] Secure Boot kapalı mı? Şu komutun çıktısına tekrar bakabilir miyim?
lspci -nnk | egrep "VGA|3D|Display" -A2

Froneo

çıktı
00:02.0 VGA compatible controller [0300]: Intel Corporation Broadwell-U Integrated Graphics [8086:1616] (rev 09)
Subsystem: Acer Incorporated [ALI] Broadwell-U Integrated Graphics [1025:0940]
Kernel driver in use: i915
--
04:00.0 3D controller [0302]: NVIDIA Corporation GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M] [10de:1140] (rev a1)
Subsystem: Acer Incorporated [ALI] GeForce 820M [1025:0941]
Kernel modules: nvidiafb, nouveau


secure boot diye bir kısım bios da yok sanırım kapalıdır.

mendirec

[mention=622476]@Froneo[/mention] Komutu uyguladıktan sonra ev dizininde dmesg diye bir dosya oluşacak. İçeriğini buraya geç lütfen.
dmesg > dmesg

Froneo

[    1.000000] microcode: microcode updated early to revision 0x22, date = 2015-09-11
[    0.000000] Linux version 4.8.0-46-generic (buildd@lcy01-15) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #49~16.04.1-Ubuntu SMP Fri Mar 31 14:51:03 UTC 2017 (Ubuntu 4.8.0-46.49~16.04.1-generic 4.8.17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-46-generic root=UUID=d97d8598-887d-4bc6-b1a7-3eb0a9e9677d ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved

mendirec

[mention=622479]@Froneo[/mention] Çıktının hepsini geçmemişsin.

Froneo

tamamı
[    0.000000] microcode: microcode updated early to revision 0x22, date = 2015-09-11
[    0.000000] Linux version 4.8.0-46-generic (buildd@lcy01-15) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #49~16.04.1-Ubuntu SMP Fri Mar 31 14:51:03 UTC 2017 (Ubuntu 4.8.0-46.49~16.04.1-generic 4.8.17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-46-generic root=UUID=d97d8598-887d-4bc6-b1a7-3eb0a9e9677d ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096eb9fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000096eba000-0x00000000977b9fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000977ba000-0x000000009c8cefff] usable
[    0.000000] BIOS-e820: [mem 0x000000009c8cf000-0x000000009cdbefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009cdbf000-0x000000009cfbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001deffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Acer Aspire E5-571G/EA50_HB   , BIOS V1.26 12/18/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1df000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7F80000000 write-back
[    0.000000]   1 base 0080000000 mask 7FE0000000 write-back
[    0.000000]   2 base 009D000000 mask 7FFF000000 uncachable
[    0.000000]   3 base 009E000000 mask 7FFE000000 uncachable
[    0.000000]   4 base 00FFA00000 mask 7FFFE00000 write-protect
[    0.000000]   5 base 00FFC00000 mask 7FFFC00000 write-protect
[    0.000000]   6 base 0100000000 mask 7F00000000 write-back
[    0.000000]   7 base 01DF000000 mask 7FFF000000 uncachable
[    0.000000]   8 base 01E0000000 mask 7FE0000000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffffa037c00fe1b0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffffa037c0098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x49c3b000, 0x49c3bfff] PGTABLE
[    0.000000] BRK [0x49c3c000, 0x49c3cfff] PGTABLE
[    0.000000] BRK [0x49c3d000, 0x49c3dfff] PGTABLE
[    0.000000] BRK [0x49c3e000, 0x49c3efff] PGTABLE
[    0.000000] BRK [0x49c3f000, 0x49c3ffff] PGTABLE
[    0.000000] BRK [0x49c40000, 0x49c40fff] PGTABLE
[    0.000000] BRK [0x49c41000, 0x49c41fff] PGTABLE
[    0.000000] BRK [0x49c42000, 0x49c42fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3336e000-0x359aefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x000000009CFC4188 0000D4 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009CFF2000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: DSDT 0x000000009CFD8000 013AD4 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: FACS 0x000000009CFB8000 000040
[    0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: UEFI 0x000000009CFFC000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFF8000 003E78 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: ASF! 0x000000009CFF6000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: ASPT 0x000000009CFF5000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: BOOT 0x000000009CFF4000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: DBGP 0x000000009CFF3000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: HPET 0x000000009CFF1000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: LPIT 0x000000009CFF0000 000094 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: APIC 0x000000009CFEF000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MCFG 0x000000009CFEE000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: WDAT 0x000000009CFED000 000224 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD4000 00342F (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFEC000 000BD3 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD3000 000539 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD2000 000B74 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFCB000 006264 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFC7000 00361B (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: DMAR 0x000000009CFC6000 0000D4 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: CSRT 0x000000009CFC5000 0000C4 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: FPDT 0x000000009CFC3000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001deffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1deff9000-0x1deffdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001deffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000096eb9fff]
[    0.000000]   node   0: [mem 0x00000000977ba000-0x000000009c8cefff]
[    0.000000]   node   0: [mem 0x000000009cfff000-0x000000009cffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001deffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001deffffff]
[    0.000000] On node 0 totalpages: 1552237
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9920 pages used for memmap
[    0.000000]   DMA32 zone: 634832 pages, LIFO batch:31
[    0.000000]   Normal zone: 14272 pages used for memmap
[    0.000000]   Normal zone: 913408 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000009e000000-0x000000009fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x96eba000-0x977b9fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9c8cf000-0x9cdbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cdbf000-0x9cfbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffffa0399ec00000 s107864 r8192 d31400 u262144
[    0.000000] pcpu-alloc: s107864 r8192 d31400 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1527960
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-46-generic root=UUID=d97d8598-887d-4bc6-b1a7-3eb0a9e9677d ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 5985188K/6208948K available (8829K kernel code, 1441K rwdata, 3832K rodata, 1548K init, 1296K bss, 223760K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] Build-time adjustment of leaf fanout to 64.
[    0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:760 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2194.950 MHz processor
[    0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.90 BogoMIPS (lpj=8779800)
[    0.000026] pid_max: default: 32768 minimum: 301
[    0.000036] ACPI: Core revision 20160422
[    0.022494] ACPI: 8 ACPI AML tables successfully acquired and loaded

[    0.022523] Security Framework initialized
[    0.022524] Yama: becoming mindful.
[    0.022539] AppArmor: AppArmor initialized
[    0.022976] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.024590] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.025306] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.025314] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.025577] CPU: Physical Processor ID: 0
[    0.025577] CPU: Processor Core ID: 0
[    0.025581] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.025582] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.025586] mce: CPU supports 7 MCE banks
[    0.025594] CPU0: Thermal monitoring enabled (TM1)
[    0.025607] process: using mwait in idle threads
[    0.025610] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.025611] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.026139] Freeing SMP alternatives memory: 32K (ffffffffa8eed000 - ffffffffa8ef5000)
[    0.033651] ftrace: allocating 33449 entries in 131 pages
[    0.049945] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.049946] smpboot: Max logical packages: 4
[    0.049957] DMAR: Host address width 39
[    0.049958] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.049964] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[    0.049965] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.049968] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.049969] DMAR: RMRR base: 0x0000009cd65000 end: 0x0000009cd84fff
[    0.049970] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
[    0.049971] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
[    0.049973] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.049973] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.049974] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.049975] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.050449] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.050450] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.051043] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.090732] TSC deadline timer enabled
[    0.090734] smpboot: CPU0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[    0.090737] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.090779] ... version:                3
[    0.090780] ... bit width:              48
[    0.090780] ... generic registers:      4
[    0.090781] ... value mask:             0000ffffffffffff
[    0.090781] ... max period:             00007fffffffffff
[    0.090782] ... fixed-purpose events:   3
[    0.090782] ... event mask:             000000070000000f
[    0.091759] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.091836] x86: Booting SMP configuration:
[    0.091837] .... node  #0, CPUs:      #1 #2 #3
[    0.100523] x86: Booted up 1 node, 4 CPUs
[    0.100524] smpboot: Total of 4 processors activated (17559.60 BogoMIPS)
[    0.104634] devtmpfs: initialized
[    0.104693] x86/mm: Memory block size: 128MB
[    0.106819] evm: security.selinux
[    0.106820] evm: security.SMACK64
[    0.106820] evm: security.SMACK64EXEC
[    0.106820] evm: security.SMACK64TRANSMUTE
[    0.106821] evm: security.SMACK64MMAP
[    0.106821] evm: security.ima
[    0.106822] evm: security.capability
[    0.106876] PM: Registering ACPI NVS region [mem 0x9cdbf000-0x9cfbefff] (2097152 bytes)
[    0.106957] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.106997] pinctrl core: initialized pinctrl subsystem
[    0.107093] RTC time: 15:03:30, date: 04/08/17
[    0.107181] NET: Registered protocol family 16
[    0.120501] cpuidle: using governor ladder
[    0.136504] cpuidle: using governor menu
[    0.136505] PCCT header not found.
[    0.136540] Simple Boot Flag at 0x44 set to 0x1
[    0.136548] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.136549] ACPI: bus type PCI registered
[    0.136550] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.136607] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.136609] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.136619] PCI: Using configuration type 1 for base access
[    0.136845] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.136845] mtrr: probably your BIOS does not setup all CPUs.
[    0.136846] mtrr: corrected configuration.
[    0.152603] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.152604] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.152820] ACPI: Added _OSI(Module Device)
[    0.152820] ACPI: Added _OSI(Processor Device)
[    0.152821] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.152822] ACPI: Added _OSI(Processor Aggregator Device)
[    0.153414] ACPI: Executed 17 blocks of module-level executable AML code
[    0.163326] ACPI: Dynamic OEM Table Load:
[    0.163335] ACPI: SSDT 0xFFFFA03996996400 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.164229] ACPI: Dynamic OEM Table Load:
[    0.164237] ACPI: SSDT 0xFFFFA039968C7000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.165185] ACPI: Dynamic OEM Table Load:
[    0.165192] ACPI: SSDT 0xFFFFA03996904800 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.166926] ACPI : EC: EC started
[    0.167242] ACPI: Interpreter enabled
[    0.167280] ACPI: (supports S0 S3 S4 S5)
[    0.167281] ACPI: Using IOAPIC for interrupt routing
[    0.167311] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.303286] ACPI: Power Resource [PC05] (on)
[    0.305792] ACPI: Power Resource [FN00] (off)
[    0.305866] ACPI: Power Resource [FN01] (off)
[    0.305940] ACPI: Power Resource [FN02] (off)
[    0.306012] ACPI: Power Resource [FN03] (off)
[    0.306085] ACPI: Power Resource [FN04] (off)
[    0.307035] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.307040] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.307853] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.307854] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.308662] PCI host bridge to bus 0000:00
[    0.308664] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.308665] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.308666] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.308668] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window]
[    0.308669] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.308676] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[    0.308947] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[    0.308957] pci 0000:00:02.0: reg 0x10: [mem 0xc2000000-0xc2ffffff 64bit]
[    0.308963] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.308967] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.309235] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[    0.309243] pci 0000:00:03.0: reg 0x10: [mem 0xc4210000-0xc4213fff 64bit]
[    0.309531] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[    0.309547] pci 0000:00:14.0: reg 0x10: [mem 0xc4200000-0xc420ffff 64bit]
[    0.309603] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.309829] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.309865] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[    0.309883] pci 0000:00:16.0: reg 0x10: [mem 0xc4219000-0xc421901f 64bit]
[    0.309949] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.310219] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[    0.310234] pci 0000:00:1b.0: reg 0x10: [mem 0xc4214000-0xc4217fff 64bit]
[    0.310290] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.310523] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.310557] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[    0.310617] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.310868] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.310903] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[    0.310964] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.311213] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.311248] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[    0.311308] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.311558] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.311591] pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400
[    0.311651] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.311908] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.311946] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[    0.314140] pci 0000:00:1d.0: reg 0x10: [mem 0xc421d000-0xc421d3ff]
[    0.315446] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.315678] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.315718] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[    0.316068] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[    0.316081] pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]
[    0.316087] pci 0000:00:1f.2: reg 0x14: [io  0x5094-0x5097]
[    0.316093] pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]
[    0.316099] pci 0000:00:1f.2: reg 0x1c: [io  0x5090-0x5093]
[    0.316105] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
[    0.316111] pci 0000:00:1f.2: reg 0x24: [mem 0xc421c000-0xc421c7ff]
[    0.316144] pci 0000:00:1f.2: PME# supported from D3hot
[    0.316388] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[    0.316401] pci 0000:00:1f.3: reg 0x10: [mem 0xc4218000-0xc42180ff 64bit]
[    0.316419] pci 0000:00:1f.3: reg 0x20: [io  0x5040-0x505f]
[    0.316685] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[    0.316712] pci 0000:00:1f.6: reg 0x10: [mem 0xc421b000-0xc421bfff 64bit]
[    0.317088] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.317151] pci 0000:02:00.0: [10ec:5287] type 00 class 0xff0000
[    0.317170] pci 0000:02:00.0: reg 0x10: [mem 0xc4105000-0xc4105fff]
[    0.317232] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.317314] pci 0000:02:00.0: supports D1 D2
[    0.317316] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.317372] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.317415] pci 0000:02:00.1: [10ec:8168] type 00 class 0x020000
[    0.317434] pci 0000:02:00.1: reg 0x10: [io  0x4000-0x40ff]
[    0.317460] pci 0000:02:00.1: reg 0x18: [mem 0xc4104000-0xc4104fff 64bit]
[    0.317477] pci 0000:02:00.1: reg 0x20: [mem 0xc4100000-0xc4103fff 64bit]
[    0.317564] pci 0000:02:00.1: supports D1 D2
[    0.317565] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.326086] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.326089] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.326091] pci 0000:00:1c.2:   bridge window [mem 0xc4100000-0xc41fffff]
[    0.326152] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000
[    0.326176] pci 0000:03:00.0: reg 0x10: [mem 0xc4000000-0xc407ffff 64bit]
[    0.326227] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.326294] pci 0000:03:00.0: supports D1 D2
[    0.326295] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.326342] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.338082] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.338086] pci 0000:00:1c.3:   bridge window [mem 0xc4000000-0xc40fffff]
[    0.338148] pci 0000:04:00.0: [10de:1140] type 00 class 0x030200
[    0.338164] pci 0000:04:00.0: reg 0x10: [mem 0xc3000000-0xc3ffffff]
[    0.338179] pci 0000:04:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.338193] pci 0000:04:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[    0.338203] pci 0000:04:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.338213] pci 0000:04:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.338316] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.350089] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.350091] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.350094] pci 0000:00:1c.4:   bridge window [mem 0xc3000000-0xc3ffffff]
[    0.350098] pci 0000:00:1c.4:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.416067] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.416114] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.416160] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.416204] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.416247] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.416291] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.416335] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.416378] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.416684] ACPI: Enabled 4 GPEs in block 00 to 7F
[    0.416948] ACPI : EC: EC stopped
[    0.416973] ACPI : EC: GPE = 0x27, I/O: command/status = 0x66, data = 0x62
[    0.416973] ACPI : EC: EC started
[    0.417476] SCSI subsystem initialized
[    0.417516] libata version 3.00 loaded.
[    0.417546] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.417547] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.417550] vgaarb: loaded
[    0.417551] vgaarb: bridge control possible 0000:00:02.0
[    0.417567] ACPI: bus type USB registered
[    0.417583] usbcore: registered new interface driver usbfs
[    0.417591] usbcore: registered new interface driver hub
[    0.417608] usbcore: registered new device driver usb
[    0.417699] PCI: Using ACPI for IRQ routing
[    0.422920] PCI: pci_cache_line_size set to 64 bytes
[    0.422966] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.422968] e820: reserve RAM buffer [mem 0x96eba000-0x97ffffff]
[    0.422968] e820: reserve RAM buffer [mem 0x9c8cf000-0x9fffffff]
[    0.422969] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[    0.422970] e820: reserve RAM buffer [mem 0x1df000000-0x1dfffffff]
[    0.423057] NetLabel: Initializing
[    0.423058] NetLabel:  domain hash size = 128
[    0.423058] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.423073] NetLabel:  unlabeled traffic allowed by default
[    0.423162] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.423166] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.425185] clocksource: Switched to clocksource hpet
[    0.432264] VFS: Disk quotas dquot_6.6.0
[    0.432283] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.432376] AppArmor: AppArmor Filesystem Enabled
[    0.432426] pnp: PnP ACPI init
[    0.432632] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.432634] system 00:00: [io  0xfd60-0xfd63] has been reserved
[    0.432636] system 00:00: [io  0xffff] has been reserved
[    0.432637] system 00:00: [io  0xffff] has been reserved
[    0.432638] system 00:00: [io  0xffff] has been reserved
[    0.432639] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.432640] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.432643] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.432692] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.432734] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.432736] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.432762] pnp 00:03: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[    0.432823] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.493708] system 00:05: [mem 0xfe102000-0xfe102fff] has been reserved
[    0.493709] system 00:05: [mem 0xfe104000-0xfe104fff] has been reserved
[    0.493711] system 00:05: [mem 0xfe106000-0xfe106fff] has been reserved
[    0.493713] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.494528] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.494529] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.494530] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.494531] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.494533] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.494534] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.494535] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.494536] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.494538] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[    0.494539] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.494540] system 00:06: [mem 0xa0010000-0xa001ffff] has been reserved
[    0.494541] system 00:06: [mem 0xa0000000-0xa000ffff] has been reserved
[    0.494543] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.494741] pnp: PnP ACPI: found 7 devices
[    0.500782] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.500786] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.500788] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.500789] pci 0000:04:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.500798] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.500800] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.500802] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.500822] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.500824] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.500825] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.500826] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.500827] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.500829] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.500832] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa02fffff]
[    0.500836] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.500838] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.500841] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.500843] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.500846] pci 0000:00:1c.0:   bridge window [mem 0xa0100000-0xa02fffff]
[    0.500849] pci 0000:00:1c.0:   bridge window [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.500855] pci 0000:02:00.0: BAR 6: assigned [mem 0xc4110000-0xc411ffff pref]
[    0.500857] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.500858] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.500862] pci 0000:00:1c.2:   bridge window [mem 0xc4100000-0xc41fffff]
[    0.500868] pci 0000:03:00.0: BAR 6: assigned [mem 0xc4080000-0xc408ffff pref]
[    0.500869] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.500873] pci 0000:00:1c.3:   bridge window [mem 0xc4000000-0xc40fffff]
[    0.500880] pci 0000:04:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[    0.500881] pci 0000:04:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[    0.500882] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.500884] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.500887] pci 0000:00:1c.4:   bridge window [mem 0xc3000000-0xc3ffffff]
[    0.500890] pci 0000:00:1c.4:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.500895] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.500896] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.500897] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.500898] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window]
[    0.500900] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.500901] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa02fffff]
[    0.500902] pci_bus 0000:01: resource 2 [mem 0xa0300000-0xa04fffff 64bit pref]
[    0.500903] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.500904] pci_bus 0000:02: resource 1 [mem 0xc4100000-0xc41fffff]
[    0.500905] pci_bus 0000:03: resource 1 [mem 0xc4000000-0xc40fffff]
[    0.500906] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.500907] pci_bus 0000:04: resource 1 [mem 0xc3000000-0xc3ffffff]
[    0.500908] pci_bus 0000:04: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.500939] NET: Registered protocol family 2
[    0.501110] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.501229] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.501345] TCP: Hash tables configured (established 65536 bind 65536)
[    0.501369] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.501390] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.501444] NET: Registered protocol family 1
[    0.501456] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.501545] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.501546] pci 0000:00:14.0: PCI INT A: no GSI
[    0.521312] PCI: CLS 64 bytes, default 64
[    0.521353] Unpacking initramfs...
[    1.166436] Freeing initrd memory: 39172K (ffffa037f336e000 - ffffa037f59af000)
[    1.166486] DMAR: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0
[    1.166505] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.166508] software IO TLB [mem 0x988cf000-0x9c8cf000] (64MB) mapped at [ffffa038588cf000-ffffa0385c8cefff]
[    1.166730] Scanning for low memory corruption every 60 seconds
[    1.167069] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.167096] audit: initializing netlink subsys (disabled)
[    1.167113] audit: type=2000 audit(1491663811.160:1): initialized
[    1.167522] Initialise system trusted keyrings
[    1.167587] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    1.169056] zbud: loaded
[    1.169462] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.169637] fuse init (API version 7.25)
[    1.169755] Allocating IMA blacklist keyring.
[    1.170610] Key type asymmetric registered
[    1.170611] Asymmetric key parser 'x509' registered
[    1.170641] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.170665] io scheduler noop registered
[    1.170666] io scheduler deadline registered (default)
[    1.170673] io scheduler cfq registered
[    1.171374] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.171377] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[    1.171394] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    1.171395] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.171396] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[    1.171398] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded
[    1.171414] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    1.171415] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.171417] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
[    1.171431] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    1.171432] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    1.171435] pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded
[    1.171442] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.171450] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.171474] pciehp 0000:00:1c.0:pcie004: service driver pciehp loaded
[    1.171479] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.171511] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    1.171512] vesafb: scrolling: redraw
[    1.171513] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.171524] vesafb: framebuffer at 0xd0000000, mapped to 0xffffaf86c1000000, using 4160k, total 4160k
[    1.171599] Console: switching to colour frame buffer device 170x48
[    1.171613] fb0: VESA VGA frame buffer device
[    1.171628] intel_idle: MWAIT substates: 0x11142120
[    1.171629] intel_idle: v0.4.1 model 0x3D
[    1.171820] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.171882] ACPI: AC Adapter [ACAD] (on-line)
[    1.171951] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C0D:00/input/input0
[    1.171970] ACPI: Lid Switch [LID0]
[    1.172016] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.172018] ACPI: Sleep Button [SLPB]
[    1.172051] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.172052] ACPI: Power Button [PWRF]
[    1.172101] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECWT] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.172105] ACPI Error: Method parse/execution failed [\_TZ.FN00._ON] (Node ffffa039980f75c8), AE_NOT_FOUND (20160422/psparse-542)
[    1.172112] acpi PNP0C0B:00: Failed to change power state to D0
[    1.172134] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECWT] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.172137] ACPI Error: Method parse/execution failed [\_TZ.FN00._ON] (Node ffffa039980f75c8), AE_NOT_FOUND (20160422/psparse-542)
[    1.172141] acpi PNP0C0B:00: Failed to set initial power state
[    1.189205] acpi PNP0C0B:00: Cannot transition from (unknown) to D3hot
[    1.189771] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.189775] ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node ffffa039980fa820), AE_NOT_FOUND (20160422/psparse-542)
[    1.189857] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.189860] ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node ffffa039980fa820), AE_NOT_FOUND (20160422/psparse-542)
[    1.189901] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.189904] ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffffa039980fa4b0), AE_NOT_FOUND (20160422/psparse-542)
[    1.189938] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[    1.189941] ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffffa039980fa4b0), AE_NOT_FOUND (20160422/psparse-542)
[    1.189968] GHES: HEST is not enabled!
[    1.190049] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.309225] [Firmware Bug]: battery: (dis)charge rate invalid.
[    1.309226] ACPI: Battery Slot [BAT1] (battery present)
[    1.309398] Linux agpgart interface v0.103
[    1.310926] loop: module loaded
[    1.311087] libphy: Fixed MDIO Bus: probed
[    1.311088] tun: Universal TUN/TAP device driver, 1.6
[    1.311088] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.311117] PPP generic driver version 2.4.2
[    1.311155] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.311158] ehci-pci: EHCI PCI platform driver
[    1.311280] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.311285] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.311295] ehci-pci 0000:00:1d.0: debug port 2
[    1.315183] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.315197] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc421d000
[    1.329183] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.329212] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.329213] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.329214] usb usb1: Product: EHCI Host Controller
[    1.329215] usb usb1: Manufacturer: Linux 4.8.0-46-generic ehci_hcd
[    1.329216] usb usb1: SerialNumber: 0000:00:1d.0
[    1.329322] hub 1-0:1.0: USB hub found
[    1.329326] hub 1-0:1.0: 2 ports detected
[    1.329437] ehci-platform: EHCI generic platform driver
[    1.329448] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.329450] ohci-pci: OHCI PCI platform driver
[    1.329459] ohci-platform: OHCI generic platform driver
[    1.329465] uhci_hcd: USB Universal Host Controller Interface driver
[    1.329557] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.329558] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    1.329576] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.329581] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.330646] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[    1.330649] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.330716] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.330717] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.330718] usb usb2: Product: xHCI Host Controller
[    1.330719] usb usb2: Manufacturer: Linux 4.8.0-46-generic xhci-hcd
[    1.330720] usb usb2: SerialNumber: 0000:00:14.0
[    1.330820] hub 2-0:1.0: USB hub found
[    1.330830] hub 2-0:1.0: 11 ports detected
[    1.334677] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.334681] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.334704] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    1.334705] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.334706] usb usb3: Product: xHCI Host Controller
[    1.334707] usb usb3: Manufacturer: Linux 4.8.0-46-generic xhci-hcd
[    1.334708] usb usb3: SerialNumber: 0000:00:14.0
[    1.334806] hub 3-0:1.0: USB hub found
[    1.334815] hub 3-0:1.0: 4 ports detected
[    1.336391] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSD0] at 0x60,0x64 irq 1,12
[    1.356218] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.356221] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.356335] mousedev: PS/2 mouse device common for all mice
[    1.356468] rtc_cmos 00:01: RTC can wake from S4
[    1.356587] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.356612] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.356619] i2c /dev entries driver
[    1.356672] device-mapper: uevent: version 1.0.3
[    1.356732] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    1.356739] intel_pstate: Intel P-state driver initializing
[    1.356933] ledtrig-cpu: registered to indicate activity on CPUs
[    1.357216] NET: Registered protocol family 10
[    1.357387] NET: Registered protocol family 17
[    1.357394] Key type dns_resolver registered
[    1.357548] microcode: sig=0x306d4, pf=0x40, revision=0x22
[    1.357591] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.357683] registered taskstats version 1
[    1.357685] Loading compiled-in X.509 certificates
[    1.360063] Loaded X.509 cert 'Build time autogenerated kernel key: 97bfb7d69aa6c98786615e071fc2bdb36c674345'
[    1.360080] zswap: loaded using pool lzo/zbud
[    1.371332] Key type big_key registered
[    1.371473] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.372959] Key type trusted registered
[    1.374370] Key type encrypted registered
[    1.374373] AppArmor: AppArmor sha1 policy hashing enabled
[    1.374375] ima: No TPM chip found, activating TPM-bypass!
[    1.374402] evm: HMAC attrs: 0x1
[    1.374818]   Magic number: 13:690:82
[    1.374850] event_source uncore_cbox_0: hash matches
[    1.374944] rtc_cmos 00:01: setting system clock to 2017-04-08 15:03:32 UTC (1491663812)
[    1.374983] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.374984] EDD information not available.
[    1.375047] PM: Hibernation image not present or could not be loaded.
[    1.376286] Freeing unused kernel memory: 1548K (ffffffffa8d6a000 - ffffffffa8eed000)
[    1.376287] Write protecting the kernel read-only data: 14336k
[    1.376626] Freeing unused kernel memory: 1396K (ffffa038092a3000 - ffffa03809400000)
[    1.377153] Freeing unused kernel memory: 264K (ffffa038097be000 - ffffa03809800000)
[    1.383256] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.392962] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.393013] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.393021] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.394139] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.394163] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.395305] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.395343] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.395353] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.395398] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.395671] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.421701] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.423210] sdhci: Secure Digital Host Controller Interface driver
[    1.423211] sdhci: Copyright(c) Pierre Ossman
[    1.426895] hidraw: raw HID events driver (C) Jiri Kosina
[    1.431582] wmi: Mapper loaded
[    1.439622] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 47
[    1.443035] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.443040] r8169 0000:02:00.1: can't disable ASPM; OS doesn't have ASPM control
[    1.445739] ahci 0000:00:1f.2: version 3.0
[    1.445755] [drm] Initialized drm 1.1.0 20060810
[    1.445926] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.454176] r8169 0000:02:00.1 eth0: RTL8411 at 0xffffaf86c0cbe000, f0:76:1c:76:2b:44, XID 1c800800 IRQ 49
[    1.454178] r8169 0000:02:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.456008] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[    1.456011] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part deso sadm sds apst
[    1.456611] scsi host0: ahci
[    1.456722] scsi host1: ahci
[    1.464216] scsi host2: ahci
[    1.464307] scsi host3: ahci
[    1.464349] ata1: SATA max UDMA/133 abar m2048@0xc421c000 port 0xc421c100 irq 48
[    1.464350] ata2: SATA max UDMA/133 abar m2048@0xc421c000 port 0xc421c180 irq 48
[    1.464351] ata3: DUMMY
[    1.464351] ata4: DUMMY
[    1.475231] r8169 0000:02:00.1 enp2s0f1: renamed from eth0
[    1.482156] [drm] Memory usable by graphics device = 4096M
[    1.482158] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[    1.482158] fb: switching to inteldrmfb from VESA VGA
[    1.482178] Console: switching to colour dummy device 80x25
[    1.482252] [drm] Replacing VGA console driver
[    1.482292] [drm] ACPI BIOS requests an excessive sleep of 10000 ms, using 1500 ms instead
[    1.487283] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.487283] [drm] Driver supports precise vblank timestamp query.
[    1.489907] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.661228] usb 2-2: new full-speed USB device number 2 using xhci_hcd
[    1.661237] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.780253] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.789642] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.789887] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    1.789986] [Firmware Bug]: ACPI(PXSX) defines _DOD but not _DOS
[    1.789992] ACPI: Video Device [PXSX] (multi-head: yes  rom: yes  post: no)
[    1.790022] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:52/LNXVIDEO:01/input/input7
[    1.790062] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
[    1.803813] usb 2-2: New USB device found, idVendor=046d, idProduct=c52b
[    1.803814] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.803815] usb 2-2: Product: USB Receiver
[    1.803816] usb 2-2: Manufacturer: Logitech
[    1.809644] usb 1-1: New USB device found, idVendor=8087, idProduct=8001
[    1.809657] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.809903] hub 1-1:1.0: USB hub found
[    1.809984] hub 1-1:1.0: 8 ports detected
[    1.810869] usbcore: registered new interface driver usbhid
[    1.810870] usbhid: USB HID core driver
[    1.813100] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
[    1.827976] ata1.00: ATA-8: TOSHIBA MQ01ABD100, AX003J, max UDMA/100
[    1.827978] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.829908] ata1.00: configured for UDMA/100
[    1.830164] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABD1 3J   PQ: 0 ANSI: 5
[    1.885367] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.885370] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.885394] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.885396] sd 0:0:0:0: [sda] Write Protect is off
[    1.885398] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.885410] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.933198] usb 2-5: new full-speed USB device number 3 using xhci_hcd
[    1.941083] input: Logitech M150 as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0003/0003:046D:400C.0004/input/input8
[    1.941278] logitech-hidpp-device 0003:046D:400C.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M150] on usb-0000:00:14.0-2:1
[    1.943154] input: Logitech K220 as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0003/0003:046D:4005.0005/input/input9
[    1.943298] logitech-hidpp-device 0003:046D:4005.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K220] on usb-0000:00:14.0-2:2
[    1.996755]  sda: sda1 sda2 < sda5 >
[    1.997084] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.078064] fbcon: inteldrmfb (fb0) is primary device
[    2.078115] Console: switching to colour frame buffer device 170x48
[    2.078128] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.078286] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b
[    2.078288] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.177213] tsc: Refined TSC clocksource calibration: 2194.918 MHz
[    2.177219] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa37202099, max_idle_ns: 440795206796 ns
[    2.197216] usb 2-7: new high-speed USB device number 4 using xhci_hcd
[    2.200334] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.203962] ata2.00: ATAPI: Slimtype DVD A  DA8A6SH, GA11, max UDMA/133
[    2.209686] ata2.00: configured for UDMA/133
[    2.216772] scsi 1:0:0:0: CD-ROM            Slimtype DVD A  DA8A6SH   GA11 PQ: 0 ANSI: 5
[    2.246271] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.246273] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.246407] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.246477] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.337970] random: fast init done
[    2.346088] usb 2-7: New USB device found, idVendor=04f2, idProduct=b48a
[    2.346090] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.346091] usb 2-7: Product: HD WebCam
[    2.346092] usb 2-7: Manufacturer: SunplusIT INC.
[    2.432595] psmouse serio1: synaptics: queried max coordinates: x [..5662], y [..4656]
[    2.464027] psmouse serio1: synaptics: queried min coordinates: x [1280..], y [1198..]
[    2.525554] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd40123/0x840300/0x12e800/0x0, board id: 2970, fw id: 1627477
[    2.564626] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.971690] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.201258] clocksource: Switched to clocksource tsc
[    3.949534] random: crng init done
[    4.450871] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    4.450987] systemd[1]: Detected architecture x86-64.
[    4.465372] systemd[1]: Set hostname to <Xecu>.
[    5.708880] systemd[1]: Listening on Journal Socket.
[    5.708955] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.708964] systemd[1]: Reached target Remote File Systems (Pre).
[    5.708983] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.709002] systemd[1]: Listening on udev Kernel Socket.
[    5.709011] systemd[1]: Reached target User and Group Name Lookups.
[    5.709175] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.021060] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.026339] lp: driver loaded but no devices found
[    7.065310] ppdev: user-space parallel port driver
[    7.193789] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    7.417441] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.901186] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    8.203497] systemd-journald[268]: Received request to flush runtime journal from PID 1
[    8.530951] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.697321] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[    9.590102] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    9.590104] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    9.590105] RAPL PMU: hw unit of domain package 2^-14 Joules
[    9.590105] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    9.590106] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   10.280547] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   10.330428] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   10.330432] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.330434] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   10.330435] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   10.330437] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   10.330439] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x12
[   10.377704] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[   10.650266] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[   10.650341] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[   10.650412] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[   10.673771] Bluetooth: Core ver 2.21
[   10.673783] NET: Registered protocol family 31
[   10.673783] Bluetooth: HCI device and connection manager initialized
[   10.673786] Bluetooth: HCI socket layer initialized
[   10.673787] Bluetooth: L2CAP socket layer initialized
[   10.673791] Bluetooth: SCO socket layer initialized
[   10.689816] AVX2 version of gcm_enc/dec engaged.
[   10.689817] AES CTR mode by8 optimization enabled
[   10.936307] media: Linux media interface: v0.10
[   11.039587] Linux video capture interface: v2.00
[   11.055687] usbcore: registered new interface driver btusb
[   11.557270] ath: phy0: WB335 2-ANT card detected
[   11.557272] ath: phy0: Set BT/WLAN RX diversity capability
[   11.563612] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b48a)
[   11.563944] ath: phy0: Enable LNA combining
[   11.565039] ath: phy0: ASPM enabled: 0x42
[   11.565040] ath: EEPROM regdomain: 0x65
[   11.565040] ath: EEPROM indicates we should expect a direct regpair map
[   11.565041] ath: Country alpha2 being used: 00
[   11.565042] ath: Regpair used: 0x65
[   11.570930] uvcvideo 2-7:1.0: Entity type for entity Extension 4 was not initialized!
[   11.570933] uvcvideo 2-7:1.0: Entity type for entity Extension 3 was not initialized!
[   11.570936] uvcvideo 2-7:1.0: Entity type for entity Processing 2 was not initialized!
[   11.570938] uvcvideo 2-7:1.0: Entity type for entity Camera 1 was not initialized!
[   11.571035] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input14
[   11.571105] usbcore: registered new interface driver uvcvideo
[   11.571106] USB Video Class driver (1.1.1)
[   11.699802] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.700073] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffaf86c1500000, irq=19
[   12.594751] intel_rapl: Found RAPL domain package
[   12.594754] intel_rapl: Found RAPL domain core
[   12.594755] intel_rapl: Found RAPL domain uncore
[   12.594759] intel_rapl: RAPL package 0 domain package locked by BIOS
[   12.603036] usbcore: registered new interface driver ath3k
[   12.603057] usb 2-5: USB disconnect, device number 3
[   12.754104] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[   12.802870] acer_wmi: Acer Laptop ACPI-WMI Extras
[   12.802880] acer_wmi: Function bitmap for Communication Button: 0x801
[   12.804232] acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0
[   12.804276] input: Acer WMI hotkeys as /devices/virtual/input/input15
[   12.804833] input: Acer BMA150 accelerometer as /devices/virtual/input/input16
[   12.905049] usb 2-5: new full-speed USB device number 5 using xhci_hcd
[   14.199594] Adding 6207484k swap on /dev/sda5.  Priority:-1 extents:1 across:6207484k FS
[   14.764222] audit: type=1400 audit(1491663825.882:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=845 comm="apparmor_parser"
[   14.764228] audit: type=1400 audit(1491663825.882:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=845 comm="apparmor_parser"
[   14.764232] audit: type=1400 audit(1491663825.882:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=845 comm="apparmor_parser"
[   14.764236] audit: type=1400 audit(1491663825.882:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=845 comm="apparmor_parser"
[   14.814787] audit: type=1400 audit(1491663825.934:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=844 comm="apparmor_parser"
[   14.814794] audit: type=1400 audit(1491663825.934:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=844 comm="apparmor_parser"
[   14.849795] audit: type=1400 audit(1491663825.970:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=846 comm="apparmor_parser"
[   14.849810] audit: type=1400 audit(1491663825.970:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=846 comm="apparmor_parser"
[   14.849813] audit: type=1400 audit(1491663825.970:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=846 comm="apparmor_parser"
[   14.849816] audit: type=1400 audit(1491663825.970:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=846 comm="apparmor_parser"
[   18.264999] usb 2-5: device descriptor read/64, error -110
[   19.716934] vboxdrv: loading out-of-tree module taints kernel.
[   19.717157] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   19.721993] vboxdrv: Found 4 processor cores
[   19.741220] vboxdrv: TSC mode is Invariant, tentative frequency 2194906275 Hz
[   19.741221] vboxdrv: Successfully loaded version 5.1.18 (interface 0x00280000)
[   21.723483] VBoxNetFlt: Successfully started.
[   21.730055] VBoxNetAdp: Successfully started.
[   21.731497] VBoxPciLinuxInit
[   21.741087] vboxpci: IOMMU not found (not registered)
[   22.770718] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   22.783028] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   22.786615] IPv6: ADDRCONF(NETDEV_UP): enp2s0f1: link is not ready
[   22.831117] r8169 0000:02:00.1 enp2s0f1: link down
[   22.831173] IPv6: ADDRCONF(NETDEV_UP): enp2s0f1: link is not ready
[   23.665975] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b
[   23.665977] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   23.970794] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   25.105223] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   25.105224] Bluetooth: BNEP filters: protocol multicast
[   25.105227] Bluetooth: BNEP socket layer initialized
[   25.483560] audit_printk_skb: 39 callbacks suppressed
[   25.483562] audit: type=1400 audit(1491663836.602:25): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/proc/1170/status" pid=1170 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=999 ouid=999
[   25.483591] audit: type=1400 audit(1491663836.602:26): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/sys/devices/system/node/" pid=1170 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=999 ouid=0
[   25.483630] audit: type=1400 audit(1491663836.602:27): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/proc/1170/status" pid=1170 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=999 ouid=999
[   38.920839] Bluetooth: RFCOMM TTY layer initialized
[   38.920846] Bluetooth: RFCOMM socket layer initialized
[   38.920851] Bluetooth: RFCOMM ver 1.11
[   45.505095] wlp3s0: authenticate with 80:a1:d7:e9:77:3c
[   45.522411] wlp3s0: send auth to 80:a1:d7:e9:77:3c (try 1/3)
[   45.524255] wlp3s0: authenticated
[   45.524561] wlp3s0: associate with 80:a1:d7:e9:77:3c (try 1/3)
[   45.528666] wlp3s0: RX AssocResp from 80:a1:d7:e9:77:3c (capab=0x411 status=0 aid=3)
[   45.528777] wlp3s0: associated
[   45.528785] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   45.531268] ath: EEPROM regdomain: 0x809e
[   45.531269] ath: EEPROM indicates we should expect a country code
[   45.531270] ath: doing EEPROM country->regdmn map search
[   45.531270] ath: country maps to regdmn code: 0x50
[   45.531271] ath: Country alpha2 being used: TW
[   45.531271] ath: Regpair used: 0x50
[   45.531272] ath: regdomain 0x809e dynamically updated by country IE
[ 1736.454521] [UFW BLOCK] IN=wlp3s0 OUT= MAC=d0:53:49:24:0d:92:80:a1:d7:e9:77:3c:08:00 SRC=185.144.83.13 DST=192.168.1.7 LEN=105 TOS=0x00 PREC=0x00 TTL=53 ID=26417 DF PROTO=TCP SPT=3129 DPT=48102 WINDOW=61 RES=0x00 ACK PSH FIN URGP=0
[ 1738.476455] [UFW BLOCK] IN=wlp3s0 OUT= MAC=d0:53:49:24:0d:92:80:a1:d7:e9:77:3c:08:00 SRC=185.144.83.13 DST=192.168.1.7 LEN=105 TOS=0x00 PREC=0x00 TTL=53 ID=49193 DF PROTO=TCP SPT=3129 DPT=48208 WINDOW=59 RES=0x00 ACK PSH FIN URGP=0
[ 1741.696944] [UFW BLOCK] IN=wlp3s0 OUT= MAC=d0:53:49:24:0d:92:80:a1:d7:e9:77:3c:08:00 SRC=185.144.83.13 DST=192.168.1.7 LEN=105 TOS=0x00 PREC=0x00 TTL=53 ID=64234 DF PROTO=TCP SPT=3129 DPT=48218 WINDOW=59 RES=0x00 ACK PSH FIN URGP=0
[ 1746.630805] [UFW BLOCK] IN=wlp3s0 OUT= MAC=d0:53:49:24:0d:92:80:a1:d7:e9:77:3c:08:00 SRC=185.144.83.13 DST=192.168.1.7 LEN=105 TOS=0x00 PREC=0x00 TTL=53 ID=64235 DF PROTO=TCP SPT=3129 DPT=48218 WINDOW=59 RES=0x00 ACK PSH FIN URGP=0
[ 1749.573254] [UFW BLOCK] IN=wlp3s0 OUT= MAC=d0:53:49:24:0d:92:80:a1:d7:e9:77:3c:08:00 SRC=185.144.83.13 DST=192.168.1.7 LEN=105 TOS=0x00 PREC=0x00 TTL=53 ID=31627 DF PROTO=TCP SPT=3129 DPT=48214 WINDOW=59 RES=0x00 ACK PSH FIN URGP=0
[ 1754.912773] [UFW BLOCK] IN=wlp3s0 OUT= MAC=d0:53:49:24:0d:92:80:a1:d7:e9:77:3c:08:00 SRC=185.144.83.13 DST=192.168.1.7 LEN=105 TOS=0x00 PREC=0x00 TTL=53 ID=62499 DF PROTO=TCP SPT=3129 DPT=48140 WINDOW=59 RES=0x00 ACK PSH FIN URGP=0
[ 1755.212411] [UFW BLOCK] IN=wlp3s0 OUT= MAC=d0:53:49:24:0d:92:80:a1:d7:e9:77:3c:08:00 SRC=185.144.83.13 DST=192.168.1.7 LEN=105 TOS=0x00 PREC=0x00 TTL=53 ID=49194 DF PROTO=TCP SPT=3129 DPT=48208 WINDOW=59 RES=0x00 ACK PSH FIN URGP=0
[ 1756.548215] [UFW BLOCK] IN=wlp3s0 OUT= MAC=d0:53:49:24:0d:92:80:a1:d7:e9:77:3c:08:00 SRC=185.144.83.13 DST=192.168.1.7 LEN=105 TOS=0x00 PREC=0x00 TTL=53 ID=64236 DF PROTO=TCP SPT=3129 DPT=48218 WINDOW=59 RES=0x00 ACK PSH FIN URGP=0
[ 1762.376326] [UFW BLOCK] IN=wlp3s0 OUT= MAC=d0:53:49:24:0d:92:80:a1:d7:e9:77:3c:08:00 SRC=185.144.83.13 DST=192.168.1.7 LEN=105 TOS=0x00 PREC=0x00 TTL=53 ID=13972 DF PROTO=TCP SPT=3129 DPT=48240 WINDOW=68 RES=0x00 ACK PSH FIN URGP=0
[ 1795.792880] [UFW BLOCK] IN=wlp3s0 OUT= MAC=d0:53:49:24:0d:92:80:a1:d7:e9:77:3c:08:00 SRC=185.144.83.13 DST=192.168.1.7 LEN=105 TOS=0x00 PREC=0x00 TTL=53 ID=62500 DF PROTO=TCP SPT=3129 DPT=48140 WINDOW=59 RES=0x00 ACK PSH FIN URGP=0
[ 1847.525646] [UFW BLOCK] IN=wlp3s0 OUT= MAC=d0:53:49:24:0d:92:80:a1:d7:e9:77:3c:08:00 SRC=172.217.17.202 DST=192.168.1.7 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=6407 PROTO=TCP SPT=443 DPT=60860 WINDOW=0 RES=0x00 RST URGP=0
[ 1847.569754] [UFW BLOCK] IN=wlp3s0 OUT= MAC=d0:53:49:24:0d:92:80:a1:d7:e9:77:3c:08:00 SRC=172.217.17.200 DST=192.168.1.7 LEN=40 TOS=0x00 PREC=0x00 TTL=54 ID=61833 PROTO=TCP SPT=443 DPT=47058 WINDOW=0 RES=0x00 RST URGP=0
[ 1858.534913] [UFW BLOCK] IN=wlp3s0 OUT= MAC=d0:53:49:24:0d:92:80:a1:d7:e9:77:3c:08:00 SRC=64.233.162.94 DST=192.168.1.7 LEN=40 TOS=0x00 PREC=0x00 TTL=45 ID=59050 PROTO=TCP SPT=443 DPT=52822 WINDOW=0 RES=0x00 RST URGP=0
[ 2099.999888] perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 2753.702427] perf: interrupt took too long (3139 > 3130), lowering kernel.perf_event_max_sample_rate to 63500

mendirec


Froneo


ata1

Alıntı Yap"Sistem Ayarları > Yazılım & Güncellemeler > Ek Sürücüler" yolunu izleyin

https://wiki.ubuntu-tr.net/index.php?title=Ekran_kartlar%C4%B1

Froneo


mendirec

[mention=622513]@Froneo[/mention] BIOS/UEFI'ye tekrar bakar mısın? Şu an kurabileceğin bir sürücü gözükmüyor. Harici ekran kartı seçeneği kapalı olabilir mi? Secure Boot açık olabilir mi? Ya da bizim bilmediğimiz bir şey mi uyguladın? Ekran kartını kara listeye almak gibi.

Froneo

bios menümde secure boot diye birşey yok ekran kartları ile ilgi bir kısımda yok kara listeye de almadım  UEFİ'nin ne olduğunu bilmiyorum ve hiç kullanmadım

plazma

Cihazın tam olarak marka ve model nosunu nedir?

Froneo

Bİlgisayarım acer e5 571g , kartım ise Nvidia geforce 820m

mendirec

[mention=622538]@Froneo[/mention] BIOS'un görüntülerini Hızlıresim gibi harici siteleri yükleyip, bağlantısını paylaşır mısın?