SSD ve RAM problemi

Başlatan alicilin, 01 Nisan 2017 - 16:06:28

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

alicilin

2 gün önce sandisk ssd plus 240 gb aldım taktım bilgisayarıma. Fakat hızı beni tatmin etmedi. Forumda arama yaptım ve https://forum.ubuntu-tr.net/index.php?topic=53076.0 bu konuya rastladım. iyiki de rastlamışım. oradaki verilen çıktıları deniyordum ki ne göreyim. Benim ssd'nin de okuma hızı çok düşük. O konuya cevaben istenilen çıktıları kendi bilgisayarımda denerken bi şok daha geçirdim. Bilgisayarımın RAM'leri DDR4 fakat 1200 mhz olarak görünüyor. Bu işte bir terslik yok mu ? Bilgisayarımın modeli Lenovo ideapad 310 (amd modeli) alalı 2-3 ay oldu. İlgili çıktıları aşağıya geçiyorum beni bilgilendirirseniz çok memnun olurum.


sudo hdparm -Tt /dev/sda
/dev/sda:
Timing cached reads:   3876 MB in  2.00 seconds = 1940.18 MB/sec
Timing buffered disk reads: 1056 MB in  3.00 seconds = 351.76 MB/sec




cat /sys/devices/virtual/dmi/id/board_{vendor,name}
LENOVO
Toronto 5B1




sudo lshw -C memory
  *-cache:0               
       açıklama: L1 önbellek
       physical id: 22
       slot: L1 Cache
       boyut: 320KiB
       kapasite: 320KiB
       saat: 1GHz (1.0ns)
       kapasiteler: pipeline-burst internal write-back unified
       yapılandırma: level=1
  *-cache:1
       açıklama: L2 önbellek
       physical id: 23
       slot: L2 Cache
       boyut: 2MiB
       kapasite: 2MiB
       saat: 1GHz (1.0ns)
       kapasiteler: pipeline-burst internal write-back unified
       yapılandırma: level=2
  *-memory
       açıklama: Sistem Belleği
       physical id: 24
       slot: System board or motherboard
       boyut: 12GiB
     *-bank:0
          açıklama: SODIMM Eşzamanlı 1200 MHz (0,8 ns)
          ürün: M471A1K43BB1-CRC
          üretici: Samsung
          physical id: 0
          serial: 33DDEFCA
          slot: DIMM 0
          boyut: 8GiB
          genişlik: 64 bits
          saat: 1200MHz (0.8ns)
     *-bank:1
          açıklama: SODIMM Eşzamanlı 1200 MHz (0,8 ns)
          ürün: 4ATF51264HZ-2G3AZ
          üretici: Micron
          physical id: 1
          serial: 00000000
          slot: DIMM 1
          boyut: 4GiB
          genişlik: 64 bits
          saat: 1200MHz (0.8ns)
  *-firmware
       açıklama: BIOS
       üretici: LENOVO
       physical id: 0
       sürüm: 1LCN32WW
       date: 09/05/2016
       boyut: 128KiB
       kapasite: 8128KiB
       kapasiteler: pc_ upgrade shadowing cdboot bootselect edd int5printscreen int9keyboard int14serial int17printer int10video acp_ usb biosbootspecification netboot uefi




sudo hdparm -I /dev/sda

/dev/sda:

ATA device, with non-removable media
Model Number:       SanDisk SDSSDA240G                     
Serial Number:      170816443410       
Firmware Revision:  Z32080RL
Media Serial Num:   
Media Manufacturer:
Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Used: unknown (minor revision code 0x0110)
Supported: 9 8 7 6 5
Likely used: 9
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors:   16514064
LBA    user addressable sectors:  268435455
LBA48  user addressable sectors:  468862128
Logical  Sector size:                   512 bytes
Physical Sector size:                   512 bytes
Logical Sector-0 offset:                  0 bytes
device size with M = 1024*1024:      228936 MBytes
device size with M = 1000*1000:      240057 MBytes (240 GB)
cache/buffer size  = unknown
Form Factor: 2.5 inch
Nominal Media Rotation Rate: Solid State Device
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 1 Current = 1
Advanced power management level: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
     Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
     Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
Enabled Supported:
   * SMART feature set
    Security Mode feature set
   * Power Management feature set
   * Write cache
   * Look-ahead
   * Host Protected Area feature set
   * WRITE_BUFFER command
   * READ_BUFFER command
   * DOWNLOAD_MICROCODE
   * Advanced Power Management feature set
    SET_MAX security extension
   * 48-bit Address feature set
   * Device Configuration Overlay feature set
   * Mandatory FLUSH_CACHE
   * FLUSH_CACHE_EXT
   * SMART error logging
   * SMART self-test
   * General Purpose Logging feature set
   * WRITE_{DMA|MULTIPLE}_FUA_EXT
   * 64-bit World wide name
   * WRITE_UNCORRECTABLE_EXT command
   * {READ,WRITE}_DMA_EXT_GPL commands
   * Segmented DOWNLOAD_MICROCODE
   * Gen1 signaling speed (1.5Gb/s)
   * Gen2 signaling speed (3.0Gb/s)
   * Gen3 signaling speed (6.0Gb/s)
   * Native Command Queueing (NCQ)
   * Phy event counters
   * READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
   * DMA Setup Auto-Activate optimization
    Device-initiated interface power management
   * Software settings preservation
    Device Sleep (DEVSLP)
   * DOWNLOAD MICROCODE DMA command
   * WRITE BUFFER DMA command
   * READ BUFFER DMA command
   * Data Set Management TRIM supported (limit 8 blocks)
   * Deterministic read ZEROs after TRIM
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
2min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5001b444a60fec58
NAA : 5
IEEE OUI : 001b44
Unique ID : 4a60fec58
Device Sleep:
DEVSLP Exit Timeout (DETO): 90 ms (drive)
Minimum DEVSLP Assertion Time (MDAT): 26 ms (drive)
Checksum: correct

<Developer/>

turkerataturk

HDD okuma yazma hızı pc hızına da bağlıdır bunun için en iyi test iyi bir masa üstü pc de test etmektir.

Yani HDD okuma yazma İşmeci ve anakart vs vs sistemin hızlı olması gerekir.
''Mustafa Kemal ATATÜRK''

matrax_41

@alicin, bakındım böyle bir problem göremedim. Farklı dağıtımda veya windows üzerinde denedin mi ?

@mustangank, masaüstü veya dizüstü ile alakası yok olayın.

alicilin

#3
Yok hocam denemedim. Ama hdd nin yedeğini harici hdd me systemback ile alıp, ssd yi taktım ve o yedeği ssd ye yükledim. Hiç problem çıkarmadı herşeyi çalışıyor. Hal böyle olunca trim özelliğini kendim aktif etmek zorunda kaldım tabi.  Bu arada 2400 mhz ddr4 ramlerin 1200 mhz görünmesi normalmiş.
<Developer/>

matrax_41

Ram konusunda ben de öyle düşündüm ama kendi sistemimde ddr3 1600 mhz ram var ve tam hızını gösteriyor.

alicilin

Bi kaç yerde okudum herkes normal demiş. Dual falan muhabbetleri geçmiş bende anlamadım doğrusu
<Developer/>