[Çözüldü] Ubuntu Açılmıyor

[zuL4]

Merhaba,
Dün bilgisayarıma sadece Linux kurmak üzere diski sil ve Linux kur seçeneği ile Ubuntu 16.04 kurdum. Kurulum esnasında olumsuz bir şey görmedim. Kurulumdan sonra da uzun bir güncelleme ve yükseltme işlemi yaptı. Bilgisayarımda şu meşhur Optimus teknolojisi mi nedir bilemiyorum olduğundan Bumblebee kurmak istedim. Şu konuda ki gibi ilerliyordum: https://forum.ubuntu-tr.net/index.php?topic=53903.0 Fakat ben glxinfo | grep renders komutuyla nedense ekran kartı sürücüsünü öğrenemedim. Ben mi göremedim bilemiyorum. Ek Sürücüler kısmına baktığımda nvidia-367 gibi bir şeyler yazıyordu bende ona göre kurulum yapmaya başladım.

Kod Seç Genişlet

sudo -H gedit /etc/modprobe.d/bumblebee.conf
bu komuttan sora açılan metin dosyasının en son satırında nvidia-361 ile ilgili yazılar gördüm ve herhalde yanlış kuracaktım diyerek devam etmedim ve bıraktım. Başımdan tüm geçenler böyle

Şimdi bilgisayar açılmıyor. Giriş ekranı ve dolayısıyla masaüstü gelmiyor. Ctrl+Alt+F1 ile Ubuntu yükleniyor/açılıyor gibi gözüküyor ama açılmıyor öyle yükleniyor sürekli. Terminali de açamıyorum. Bir çözüm öneriniz var mı?

[mendirec]

@zuL4, şu bağlantıya göre hareket et lütfen.
https://wiki.ubuntu-tr.net/index.php?title=Ubuntu%27da_sistem_kurtarma

"root :Yetkili kullanıcı komut satırına gir" kısmından giriş yap. Aşağıdaki komutları sırasıyla uygula.

Kod Seç Genişlet

mount -o rw,remount /
sudo apt remove nvidia* bumblebee*
sudo reboot

[zuL4]

@zuL4, şu bağlantıya göre hareket et lütfen.
https://wiki.ubuntu-tr.net/index.php?title=Ubuntu%27da_sistem_kurtarma

"root :Yetkili kullanıcı komut satırına gir" kısmından giriş yap. Aşağıdaki komutları sırasıyla uygula.

Kod Seç Genişlet

mount -o rw,remount /
sudo apt remove nvidia* bumblebee*
sudo reboot

Uzun uğraşlar sonucu terminal ekranı geldi. Yani ekstra bir şey yapmadım sadece 10 - 15 dk bekledim. Sonrasında sizin konunuzda belirttiğiniz gibi bumblebee'yi kaldırdım. Birkaç defa yeniden başlattım çalışıyor. Fakat anlamadığım ben nvidia-361 mi yoksa nvdia-367'e göre mi kurulum yapacağım.

[mendirec]

@zuL4, ilk önce Prime yöntemini deneyelim. Olmazsa Bumblebee ile uğraşalım. UEFI/BIOS üzerinde Secure Boot kapalı mı? Açık ise kapatın. Bir de şu komuttan sonra ev dizininde dmesg adlı dosya oluşacak. Çıktısını buraya geçer misin?

Kod Seç Genişlet

dmesg > dmesg

[zuL4]

[mention=618327]@mendirec[/mention] BIOS'a girdim. Secure Boot diye bir şey göremedim. UEFI Boot var tek. Verdiğiniz komutu çalıştırıp, çıktıyı buraya geçeyim mi?

[mendirec]

Evet bir bakalım. Daha önce ek sürücülerden sürücü yüklediniz mi?

[zuL4]

[mention=618329]@mendirec[/mention] Hayır ek sürücülerden herhangi bir yükleme veya değişiklik yapmadım.

dmesg çıktısı:

Kod Seç Genişlet


[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-62-generic (buildd@lcy01-30) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #83-Ubuntu SMP Wed Jan 18 14:10:15 UTC 2017 (Ubuntu 4.4.0-62.83-generic 4.4.40)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-62-generic.efi.signed root=UUID=6634fc7b-6a40-425f-a843-4982a3ddad87 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000007be04fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007be05000-0x000000007c006fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c007000-0x00000000c85c7fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c85c8000-0x00000000c87c7fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000c87c8000-0x00000000caeeefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000caeef000-0x00000000caf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000caf9f000-0x00000000caffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001af5fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000001af600000-0x00000001afffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by Phoenix Technologies Ltd.
[    0.000000] efi:  ACPI=0xcaffe000  ACPI 2.0=0xcaffe014  SMBIOS=0xcae8b000
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO IdeaPad Z580    /Lenovo          , BIOS 5FCN34WW 06/11/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1af600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FF800000 mask FFF800000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0C0000000 mask FE0000000 write-back
[    0.000000]   4 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   5 base 0CC000000 mask FFC000000 uncachable
[    0.000000]   6 base 0CB000000 mask FFF000000 uncachable
[    0.000000]   7 base 100000000 mask F80000000 write-back
[    0.000000]   8 base 180000000 mask FE0000000 write-back
[    0.000000]   9 base 1A0000000 mask FF0000000 write-back
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff88000005f000] 5f000 size 24576
[    0.000000] BRK [0x0320b000, 0x0320bfff] PGTABLE
[    0.000000] BRK [0x0320c000, 0x0320cfff] PGTABLE
[    0.000000] BRK [0x0320d000, 0x0320dfff] PGTABLE
[    0.000000] BRK [0x0320e000, 0x0320efff] PGTABLE
[    0.000000] BRK [0x0320f000, 0x0320ffff] PGTABLE
[    0.000000] BRK [0x03210000, 0x03210fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x337f6000-0x35bf2fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000CAFFE014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000CAFFE170 0000A4 (v01 LENOVO CB-01    06040000  LTP 00000000)
[    0.000000] ACPI: FACP 0x00000000CAFEE000 0000F4 (v03 LENOVO CB-01    06040000  LTP 00000000)
[    0.000000] ACPI: DSDT 0x00000000CAFF1000 00AD40 (v02 LENOVO IVB-CPT  00000000 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000CAF78000 000040
[    0.000000] ACPI: FACS 0x00000000CAF78000 000040
[    0.000000] ACPI: SLIC 0x00000000CAFFD000 000176 (v01 LENOVO CB-01    06040000  LTP 00000000)
[    0.000000] ACPI: SSDT 0x00000000CAFFC000 00052F (v01 LENOVO PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 0x00000000CAFF0000 0000A5 (v32 LENOVO CB-01    06040000  LTP 00000000)
[    0.000000] ACPI: HPET 0x00000000CAFED000 000038 (v01 LENOVO CB-01    06040000  LTP 00000000)
[    0.000000] ACPI: APIC 0x00000000CAFEC000 000098 (v01 LENOVO CB-01    06040000  LTP 00000000)
[    0.000000] ACPI: MCFG 0x00000000CAFEB000 00003C (v01 LENOVO CB-01    06040000  LTP 00000000)
[    0.000000] ACPI: FPDT 0x00000000CAFEA000 000064 (v01 LENOVO CB-01    06040000  LTP 00000000)
[    0.000000] ACPI: SSDT 0x00000000CAFE9000 000968 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000CAFE8000 000A92 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000CAFE7000 00003E (v01 LENOVO CB-01    06040000  LTP 00000000)
[    0.000000] ACPI: UEFI 0x00000000CAFE6000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: POAT 0x00000000CAFE5000 000055 (v03 LENOVO CB-01    06040000  LTP 00000000)
[    0.000000] ACPI: SSDT 0x00000000CAFE4000 000830 (v01 SgRef  SgTabl   00001000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000CAFE3000 000B43 (v01 NvORef NvOptTbl 00001000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000CAFE2000 0002BA (v01 LENOVO CB-01    06040000  LTP 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001af5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1af5f3000-0x1af5f7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001af5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000008ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.000000]   node   0: [mem 0x0000000040005000-0x000000007be04fff]
[    0.000000]   node   0: [mem 0x000000007c007000-0x00000000c85c7fff]
[    0.000000]   node   0: [mem 0x00000000cafff000-0x00000000caffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001af5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001af5fffff]
[    0.000000] On node 0 totalpages: 1537877
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 73 pages reserved
[    0.000000]   DMA zone: 3983 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12744 pages used for memmap
[    0.000000]   DMA32 zone: 815558 pages, LIFO batch:31
[    0.000000]   Normal zone: 11224 pages used for memmap
[    0.000000]   Normal zone: 718336 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xcba00000-0xcf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00090000-0x000bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7be05000-0x7c006fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc85c8000-0xc87c7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc87c8000-0xcaeeefff]
[    0.000000] PM: Registered nosave memory: [mem 0xcaeef000-0xcaf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xcaf9f000-0xcaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xf80f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
[    0.000000] e820: [mem 0xcfa00000-0xf80f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff8801af200000 s98264 r8192 d28712 u262144
[    0.000000] pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1513772
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-62-generic.efi.signed root=UUID=6634fc7b-6a40-425f-a843-4982a3ddad87 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 5708036K/6151508K available (8436K kernel code, 1291K rwdata, 3960K rodata, 1488K init, 1316K bss, 443472K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] Build-time adjustment of leaf fanout to 64.
[    0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:488 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2494.272 MHz processor
[    0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.54 BogoMIPS (lpj=9977088)
[    0.000036] pid_max: default: 32768 minimum: 301
[    0.000041] ACPI: Core revision 20150930
[    0.009818] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.025442] Security Framework initialized
[    0.025445] Yama: becoming mindful.
[    0.025462] AppArmor: AppArmor initialized
[    0.025928] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.027876] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.028759] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028769] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028963] Initializing cgroup subsys io
[    0.028966] Initializing cgroup subsys memory
[    0.028972] Initializing cgroup subsys devices
[    0.028974] Initializing cgroup subsys freezer
[    0.028976] Initializing cgroup subsys net_cls
[    0.028978] Initializing cgroup subsys perf_event
[    0.028980] Initializing cgroup subsys net_prio
[    0.028983] Initializing cgroup subsys hugetlb
[    0.028984] Initializing cgroup subsys pids
[    0.029004] CPU: Physical Processor ID: 0
[    0.029005] CPU: Processor Core ID: 0
[    0.029010] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.029011] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.029366] mce: CPU supports 7 MCE banks
[    0.029376] CPU0: Thermal monitoring enabled (TM1)
[    0.029383] process: using mwait in idle threads
[    0.029386] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.029387] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.029809] Freeing SMP alternatives memory: 32K (ffffffff820b8000 - ffffffff820c0000)
[    0.037302] ftrace: allocating 32065 entries in 126 pages
[    0.051911] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.051913] smpboot: Max logical packages: 4
[    0.051988] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.052434] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.092122] TSC deadline timer enabled
[    0.092126] smpboot: CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.092140] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.092159] ... version:                3
[    0.092160] ... bit width:              48
[    0.092161] ... generic registers:      4
[    0.092161] ... value mask:             0000ffffffffffff
[    0.092162] ... max period:             00007fffffffffff
[    0.092163] ... fixed-purpose events:   3
[    0.092164] ... event mask:             000000070000000f
[    0.092938] x86: Booting SMP configuration:
[    0.092939] .... node  #0, CPUs:      #1
[    0.095722] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.095801]  #2 #3
[    0.101212] x86: Booted up 1 node, 4 CPUs
[    0.101215] smpboot: Total of 4 processors activated (19954.17 BogoMIPS)
[    0.104342] devtmpfs: initialized
[    0.106666] evm: security.selinux
[    0.106667] evm: security.SMACK64
[    0.106668] evm: security.SMACK64EXEC
[    0.106668] evm: security.SMACK64TRANSMUTE
[    0.106669] evm: security.SMACK64MMAP
[    0.106670] evm: security.ima
[    0.106671] evm: security.capability
[    0.106731] PM: Registering ACPI NVS region [mem 0xcaeef000-0xcaf9efff] (720896 bytes)
[    0.106814] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.106898] pinctrl core: initialized pinctrl subsystem
[    0.107004] RTC time:  8:20:11, date: 02/17/17
[    0.107113] NET: Registered protocol family 16
[    0.117211] cpuidle: using governor ladder
[    0.133218] cpuidle: using governor menu
[    0.133224] PCCT header not found.
[    0.133324] ACPI: bus type PCI registered
[    0.133325] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.133397] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.133399] PCI: not using MMCONFIG
[    0.133400] PCI: Using configuration type 1 for base access
[    0.133431] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.149589] ACPI: Added _OSI(Module Device)
[    0.149591] ACPI: Added _OSI(Processor Device)
[    0.149592] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.149593] ACPI: Added _OSI(Processor Aggregator Device)
[    0.152525] ACPI: Executed 2 blocks of module-level executable AML code
[    0.155133] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.155475] ACPI: Dynamic OEM Table Load:
[    0.155483] ACPI: SSDT 0xFFFF8801A74AE000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.156032] ACPI: Dynamic OEM Table Load:
[    0.156038] ACPI: SSDT 0xFFFF8801A75AF000 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.156521] ACPI: Dynamic OEM Table Load:
[    0.156525] ACPI: SSDT 0xFFFF8801A75A7600 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.157400] ACPI : EC: EC started
[    0.581577] ACPI: Interpreter enabled
[    0.581600] ACPI: (supports S0 S1 S3 S4 S5)
[    0.581601] ACPI: Using IOAPIC for interrupt routing
[    0.581625] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.581946] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.581954] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.590164] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.590170] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.590284] \_SB_.PCI0:_OSC invalid UUID
[    0.590285] _OSC request data:1 1f 0
[    0.590289] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.590677] PCI host bridge to bus 0000:00
[    0.590680] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.590682] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.590683] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.590685] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff window]
[    0.590687] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.590688] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.590696] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.590775] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.590806] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.590839] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.590877] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.590889] pci 0000:00:02.0: reg 0x10: [mem 0xf3400000-0xf37fffff 64bit]
[    0.590894] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.590899] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.590989] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.591020] pci 0000:00:14.0: reg 0x10: [mem 0xf3a00000-0xf3a0ffff 64bit]
[    0.591082] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.591116] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.591155] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.591188] pci 0000:00:16.0: reg 0x10: [mem 0xf3a15000-0xf3a1500f 64bit]
[    0.591252] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.591327] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.591357] pci 0000:00:1a.0: reg 0x10: [mem 0xf3a19000-0xf3a193ff]
[    0.591432] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.591479] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.591516] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.591544] pci 0000:00:1b.0: reg 0x10: [mem 0xf3a10000-0xf3a13fff 64bit]
[    0.591608] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.591649] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.591685] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.591764] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.591802] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.591838] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.591917] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.591955] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.591990] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.592068] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.592108] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.592149] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.592178] pci 0000:00:1d.0: reg 0x10: [mem 0xf3a18000-0xf3a183ff]
[    0.592253] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.592299] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.592336] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    0.592501] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.592526] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    0.592535] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
[    0.592543] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    0.592551] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
[    0.592559] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.592567] pci 0000:00:1f.2: reg 0x24: [mem 0xf3a17000-0xf3a177ff]
[    0.592600] pci 0000:00:1f.2: PME# supported from D3hot
[    0.592663] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.592681] pci 0000:00:1f.3: reg 0x10: [mem 0xf3a14000-0xf3a140ff 64bit]
[    0.592702] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.592816] pci 0000:01:00.0: [10de:0de9] type 00 class 0x030000
[    0.592830] pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff]
[    0.592836] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.592843] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.592847] pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.592851] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.592936] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.597486] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.597491] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.597496] pci 0000:00:01.0:   bridge window [mem 0xf2000000-0xf30fffff]
[    0.597502] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.597579] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.597714] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.597886] pci 0000:03:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.598009] pci 0000:03:00.0: reg 0x18: [mem 0xf3804000-0xf3804fff 64bit pref]
[    0.598085] pci 0000:03:00.0: reg 0x20: [mem 0xf3800000-0xf3803fff 64bit pref]
[    0.598388] pci 0000:03:00.0: supports D1 D2
[    0.598389] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.598533] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.605551] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.605556] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.605564] pci 0000:00:1c.1:   bridge window [mem 0xf3800000-0xf38fffff 64bit pref]
[    0.605668] pci 0000:04:00.0: [14e4:4727] type 00 class 0x028000
[    0.605728] pci 0000:04:00.0: reg 0x10: [mem 0xf3900000-0xf3903fff 64bit]
[    0.605879] pci 0000:04:00.0: supports D1 D2
[    0.605881] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.605932] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.613537] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.613554] pci 0000:00:1c.2:   bridge window [mem 0xf3900000-0xf39fffff]
[    0.614089] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.614137] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.614182] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.614227] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.614272] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.614317] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.614362] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.614406] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.614809] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.614855] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.614954] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.614956] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.614960] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.614961] vgaarb: loaded
[    0.614962] vgaarb: bridge control possible 0000:01:00.0
[    0.614963] vgaarb: no bridge control possible 0000:00:02.0
[    0.615178] SCSI subsystem initialized
[    0.615218] libata version 3.00 loaded.
[    0.615240] ACPI: bus type USB registered
[    0.615253] usbcore: registered new interface driver usbfs
[    0.615260] usbcore: registered new interface driver hub
[    0.615277] usbcore: registered new device driver usb
[    0.615436] PCI: Using ACPI for IRQ routing
[    0.617002] PCI: pci_cache_line_size set to 64 bytes
[    0.617081] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.617082] e820: reserve RAM buffer [mem 0x7be05000-0x7bffffff]
[    0.617083] e820: reserve RAM buffer [mem 0xc85c8000-0xcbffffff]
[    0.617085] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[    0.617086] e820: reserve RAM buffer [mem 0x1af600000-0x1afffffff]
[    0.617201] NetLabel: Initializing
[    0.617202] NetLabel:  domain hash size = 128
[    0.617203] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.617214] NetLabel:  unlabeled traffic allowed by default
[    0.617282] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.617287] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.619300] amd_nb: Cannot enumerate AMD northbridges
[    0.619314] clocksource: Switched to clocksource hpet
[    0.624648] AppArmor: AppArmor Filesystem Enabled
[    0.624713] pnp: PnP ACPI init
[    0.624844] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.624846] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.624848] system 00:00: [io  0xffff] has been reserved
[    0.624850] system 00:00: [io  0xffff] has been reserved
[    0.624852] system 00:00: [io  0x0400-0x0453] could not be reserved
[    0.624853] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.624855] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.624856] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.624860] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.624884] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.624930] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.624933] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.624954] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.625043] pnp 00:04: Plug and Play ACPI device, IDs SYN104c SYN1000 SYN0002 PNP0f13 (active)
[    0.625186] pnp 00:05: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[    0.625207] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.625209] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.625211] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.625212] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.625214] system 00:05: [mem 0xf8000000-0xfbffffff] could not be reserved
[    0.625216] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.625217] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.625219] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.625221] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.625222] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.625225] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.625664] pnp: PnP ACPI: found 6 devices
[    0.632006] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.632013] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.632047] pci 0000:01:00.0: BAR 6: assigned [mem 0xf3000000-0xf307ffff pref]
[    0.632050] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.632052] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.632055] pci 0000:00:01.0:   bridge window [mem 0xf2000000-0xf30fffff]
[    0.632057] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.632061] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.632072] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.632076] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.632083] pci 0000:00:1c.1:   bridge window [mem 0xf3800000-0xf38fffff 64bit pref]
[    0.632090] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.632095] pci 0000:00:1c.2:   bridge window [mem 0xf3900000-0xf39fffff]
[    0.632105] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.632106] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.632108] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.632110] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff window]
[    0.632111] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[    0.632113] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.632114] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf30fffff]
[    0.632116] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.632117] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.632119] pci_bus 0000:03: resource 2 [mem 0xf3800000-0xf38fffff 64bit pref]
[    0.632121] pci_bus 0000:04: resource 1 [mem 0xf3900000-0xf39fffff]
[    0.632152] NET: Registered protocol family 2
[    0.632290] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.632409] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.632519] TCP: Hash tables configured (established 65536 bind 65536)
[    0.632540] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.632564] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.632621] NET: Registered protocol family 1
[    0.632635] pci 0000:00:02.0: Video device with shadowed ROM
[    0.633097] PCI: CLS 64 bytes, default 64
[    0.633143] Trying to unpack rootfs image as initramfs...
[    1.165262] Freeing initrd memory: 36852K (ffff8800337f6000 - ffff880035bf3000)
[    1.165284] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.165286] software IO TLB [mem 0xb48be000-0xb88be000] (64MB) mapped at [ffff8800b48be000-ffff8800b88bdfff]
[    1.165346] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    1.165347] hw unit of domain pp0-core 2^-16 Joules
[    1.165348] hw unit of domain package 2^-16 Joules
[    1.165349] hw unit of domain pp1-gpu 2^-16 Joules
[    1.165489] Scanning for low memory corruption every 60 seconds
[    1.165809] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.165841] audit: initializing netlink subsys (disabled)
[    1.165854] audit: type=2000 audit(1487319612.144:1): initialized
[    1.166255] Initialise system trusted keyring
[    1.166382] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.167675] zbud: loaded
[    1.167872] VFS: Disk quotas dquot_6.6.0
[    1.167902] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.168127] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.168333] fuse init (API version 7.23)
[    1.168450] Key type big_key registered
[    1.168469] Allocating IMA MOK and blacklist keyrings.
[    1.168903] Key type asymmetric registered
[    1.168907] Asymmetric key parser 'x509' registered
[    1.168945] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.168979] io scheduler noop registered
[    1.168982] io scheduler deadline registered (default)
[    1.169011] io scheduler cfq registered
[    1.169523] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.169529] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.169557] efifb: probing for efifb
[    1.169564] pmd_set_huge: Cannot satisfy [mem 0xd0000000-0xd0200000] with a huge-page mapping due to MTRR override.
[    1.169572] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 4160k, total 4160k
[    1.169573] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    1.169573] efifb: scrolling: redraw
[    1.169575] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.169667] Console: switching to colour frame buffer device 170x48
[    1.169684] fb0: EFI VGA frame buffer device
[    1.169691] intel_idle: MWAIT substates: 0x21120
[    1.169692] intel_idle: v0.4.1 model 0x3A
[    1.169693] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.170108] ACPI: AC Adapter [ACAD] (on-line)
[    1.170163] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.170410] ACPI: Lid Switch [LID0]
[    1.170443] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.170446] ACPI: Sleep Button [SLPB]
[    1.170476] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    1.170478] ACPI: Power Button [PWRB]
[    1.170508] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.170510] ACPI: Power Button [PWRF]
[    1.173483] thermal LNXTHERM:00: registered as thermal_zone0
[    1.173487] ACPI: Thermal Zone [TZ00] (60 C)
[    1.173549] GHES: HEST is not enabled!
[    1.173739] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.175392] Linux agpgart interface v0.103
[    1.177910] brd: module loaded
[    1.178993] loop: module loaded
[    1.179187] libphy: Fixed MDIO Bus: probed
[    1.179191] tun: Universal TUN/TAP device driver, 1.6
[    1.179192] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.179229] PPP generic driver version 2.4.2
[    1.179282] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.179287] ehci-pci: EHCI PCI platform driver
[    1.179420] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.179427] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.179445] ehci-pci 0000:00:1a.0: debug port 2
[    1.183359] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.183371] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3a19000
[    1.195368] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.195429] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.195431] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.195433] usb usb1: Product: EHCI Host Controller
[    1.195434] usb usb1: Manufacturer: Linux 4.4.0-62-generic ehci_hcd
[    1.195435] usb usb1: SerialNumber: 0000:00:1a.0
[    1.195585] hub 1-0:1.0: USB hub found
[    1.195593] hub 1-0:1.0: 3 ports detected
[    1.195805] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.195811] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.195822] ehci-pci 0000:00:1d.0: debug port 2
[    1.199717] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.199728] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3a18000
[    1.203258] ACPI: Battery Slot [BAT1] (battery present)
[    1.211347] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.211390] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.211392] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.211394] usb usb2: Product: EHCI Host Controller
[    1.211395] usb usb2: Manufacturer: Linux 4.4.0-62-generic ehci_hcd
[    1.211397] usb usb2: SerialNumber: 0000:00:1d.0
[    1.211611] hub 2-0:1.0: USB hub found
[    1.211618] hub 2-0:1.0: 3 ports detected
[    1.211749] ehci-platform: EHCI generic platform driver
[    1.211761] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.211767] ohci-pci: OHCI PCI platform driver
[    1.211777] ohci-platform: OHCI generic platform driver
[    1.211785] uhci_hcd: USB Universal Host Controller Interface driver
[    1.211886] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.211892] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.212979] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[    1.212985] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.213068] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.213069] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.213071] usb usb3: Product: xHCI Host Controller
[    1.213072] usb usb3: Manufacturer: Linux 4.4.0-62-generic xhci-hcd
[    1.213073] usb usb3: SerialNumber: 0000:00:14.0
[    1.213259] hub 3-0:1.0: USB hub found
[    1.213271] hub 3-0:1.0: 4 ports detected
[    1.213572] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.213575] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.213603] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.213605] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.213606] usb usb4: Product: xHCI Host Controller
[    1.213608] usb usb4: Manufacturer: Linux 4.4.0-62-generic xhci-hcd
[    1.213609] usb usb4: SerialNumber: 0000:00:14.0
[    1.213791] hub 4-0:1.0: USB hub found
[    1.213802] hub 4-0:1.0: 4 ports detected
[    1.214161] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2C] at 0x60,0x64 irq 1,12
[    1.219096] i8042: Detected active multiplexing controller, rev 1.1
[    1.219921] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.219925] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.219953] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.219976] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.219998] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.220252] mousedev: PS/2 mouse device common for all mice
[    1.220654] rtc_cmos 00:01: RTC can wake from S4
[    1.220830] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.220858] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.220865] i2c /dev entries driver
[    1.220909] device-mapper: uevent: version 1.0.3
[    1.220968] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.220981] Intel P-state driver initializing.
[    1.221135] ledtrig-cpu: registered to indicate activity on CPUs
[    1.221145] EFI Variables Facility v0.08 2004-May-17
[    1.232479] NET: Registered protocol family 10
[    1.232638] NET: Registered protocol family 17
[    1.232649] Key type dns_resolver registered
[    1.232815] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[    1.232824] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
[    1.232834] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
[    1.232842] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
[    1.232871] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.232997] registered taskstats version 1
[    1.233014] Loading compiled-in X.509 certificates
[    1.233737] Loaded X.509 cert 'Build time autogenerated kernel key: a630254739635d6fdc487c9f0afa5d9a0ff04f04'
[    1.233753] zswap: loaded using pool lzo/zbud
[    1.235179] Key type trusted registered
[    1.237690] Key type encrypted registered
[    1.237697] AppArmor: AppArmor sha1 policy hashing enabled
[    1.237700] ima: No TPM chip found, activating TPM-bypass!
[    1.237715] evm: HMAC attrs: 0x1
[    1.238064]   Magic number: 5:370:321
[    1.238090] tty tty46: hash matches
[    1.238098] pci 0000:00:02.0: hash matches
[    1.238167] rtc_cmos 00:01: setting system clock to 2017-02-17 08:20:12 UTC (1487319612)
[    1.238216] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.238217] EDD information not available.
[    1.238277] PM: Hibernation image not present or could not be loaded.
[    1.239248] Freeing unused kernel memory: 1488K (ffffffff81f44000 - ffffffff820b8000)
[    1.239250] Write protecting the kernel read-only data: 14336k
[    1.239665] Freeing unused kernel memory: 1792K (ffff880002840000 - ffff880002a00000)
[    1.239932] Freeing unused kernel memory: 136K (ffff880002dde000 - ffff880002e00000)
[    1.247742] random: systemd-udevd: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    1.247800] random: systemd-udevd: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    1.247813] random: systemd-udevd: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    1.248287] random: udevadm: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    1.248327] random: udevadm: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    1.248527] random: udevadm: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    1.248576] random: udevadm: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    1.248618] random: udevadm: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    1.248659] random: udevadm: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    1.248701] random: udevadm: uninitialized urandom read (16 bytes read, 14 bits of entropy available)
[    1.260339] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.320714] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.331192] wmi: Mapper loaded
[    1.337561] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.337572] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.337611] [drm] Initialized drm 1.1.0 20060810
[    1.338011] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc90000c86000, 08:9e:01:15:c6:00, XID 00c00000 IRQ 26
[    1.368851] ahci 0000:00:1f.2: version 3.0
[    1.380726] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    1.380799] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    1.380859] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[    1.380862] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[    1.380880] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
[    1.380953] checking generic (d0000000 410000) vs hw (e0000000 10000000)
[    1.380955] checking generic (d0000000 410000) vs hw (f0000000 2000000)
[    1.380985] nouveau 0000:01:00.0: NVIDIA GF108 (0c1480a1)
[    1.383482] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    1.383485] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[    1.393605] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    1.418881] nouveau 0000:01:00.0: bios: version 70.08.a8.00.3d
[    1.418949] scsi host0: ahci
[    1.419061] scsi host1: ahci
[    1.419164] scsi host2: ahci
[    1.419270] scsi host3: ahci
[    1.419388] scsi host4: ahci
[    1.419483] scsi host5: ahci
[    1.419548] ata1: SATA max UDMA/133 abar m2048@0xf3a17000 port 0xf3a17100 irq 27
[    1.419550] ata2: DUMMY
[    1.419553] ata3: SATA max UDMA/133 abar m2048@0xf3a17000 port 0xf3a17200 irq 27
[    1.419555] ata4: DUMMY
[    1.419556] ata5: DUMMY
[    1.419557] ata6: DUMMY
[    1.420431] [drm] Memory usable by graphics device = 2048M
[    1.420434] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[    1.420435] fb: switching to inteldrmfb from EFI VGA
[    1.420456] Console: switching to colour dummy device 80x25
[    1.420525] [drm] Replacing VGA console driver
[    1.427005] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.427009] [drm] Driver supports precise vblank timestamp query.
[    1.428057] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    1.460034] fbcon: inteldrmfb (fb0) is primary device
[    1.460112] Console: switching to colour frame buffer device 170x48
[    1.460139] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.460208] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    1.461247] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    1.461361] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:41/LNXVIDEO:00/input/input10
[    1.462165] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.462228] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input11
[    1.462286] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    1.507358] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.523358] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[    1.523371] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.569640] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[    1.619726] vga_switcheroo: enabled
[    1.619803] [TTM] Zone  kernel: Available graphics memory: 2985326 kiB
[    1.619804] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    1.619805] [TTM] Initializing pool allocator
[    1.619809] [TTM] Initializing DMA pool allocator
[    1.619826] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[    1.619827] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    1.619830] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    1.619832] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    1.619833] nouveau 0000:01:00.0: DRM: DCB outp 00: 02001300 00000000
[    1.619835] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
[    1.631179] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.631189] [drm] Driver supports precise vblank timestamp query.
[    1.639704] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.639707] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.640024] hub 1-1:1.0: USB hub found
[    1.640202] hub 1-1:1.0: 6 ports detected
[    1.653529] usb 3-1: New USB device found, idVendor=046d, idProduct=c52f
[    1.653532] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.653533] usb 3-1: Product: USB Receiver
[    1.653535] usb 3-1: Manufacturer: Logitech
[    1.658156] hidraw: raw HID events driver (C) Jiri Kosina
[    1.661535] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.661539] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.661714] hub 2-1:1.0: USB hub found
[    1.661798] hub 2-1:1.0: 6 ports detected
[    1.663524] usbcore: registered new interface driver usbhid
[    1.663526] usbhid: USB HID core driver
[    1.665430] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:046D:C52F.0001/input/input15
[    1.665533] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
[    1.666210] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:046D:C52F.0002/input/input16
[    1.670995] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[    1.719539] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
[    1.731011] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x60000, bo ffff8801a3c3ac00
[    1.731131] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[    1.731136] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[    1.739409] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.739455] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.741148] ata3.00: ATAPI: Optiarc DVD RW AD-7740H, A842, max UDMA/100
[    1.743262] ata3.00: configured for UDMA/100
[    1.750710] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A
[    1.750735] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[    1.768289] ata1.00: ATA-8: ST320LT007-9ZV142, 0002SDM1, max UDMA/133
[    1.768292] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.771646] ata1.00: configured for UDMA/133
[    1.771967] scsi 0:0:0:0: Direct-Access     ATA      ST320LT007-9ZV14 SDM1 PQ: 0 ANSI: 5
[    1.772286] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.772290] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.772313] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.772344] sd 0:0:0:0: [sda] Write Protect is off
[    1.772347] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.772371] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.772937] scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-7740H  A842 PQ: 0 ANSI: 5
[    1.789671] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.789674] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.789869] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.789963] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    1.819427] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[    1.843444]  sda: sda1 sda2 sda3
[    1.844073] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.911385] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[    2.004180] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0139
[    2.004184] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.004187] usb 1-1.3: Product: USB2.0-CRW
[    2.004189] usb 1-1.3: Manufacturer: Generic
[    2.004191] usb 1-1.3: SerialNumber: 20100201396000000
[    2.008609] usbcore: registered new interface driver rtsx_usb
[    2.112560] usb 3-3: New USB device found, idVendor=1bcf, idProduct=2c02
[    2.112568] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.112573] usb 3-3: Product: Lenovo EasyCamera
[    2.112576] usb 3-3: Manufacturer: LOEAAI011P2S01128105248
[    2.163404] tsc: Refined TSC clocksource calibration: 2494.334 MHz
[    2.163411] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45126d86, max_idle_ns: 440795256522 ns
[    2.516839] psmouse serio4: synaptics: queried max coordinates: x [..5664], y [..4682]
[    2.583379] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd00123/0x840300/0x123c00/0x0, board id: 1800, fw id: 876955
[    2.624638] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input14
[    2.696035] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.163625] clocksource: Switched to clocksource tsc
[    3.427485] random: nonblocking pool is initialized
[    4.366372] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    4.366522] systemd[1]: Detected architecture x86-64.
[    4.376658] systemd[1]: Set hostname to <myLab>.
[    5.826147] systemd[1]: Reached target Remote File Systems (Pre).
[    5.826232] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.826240] systemd[1]: Reached target Encrypted Volumes.
[    5.826246] systemd[1]: Reached target User and Group Name Lookups.
[    5.826272] systemd[1]: Listening on udev Kernel Socket.
[    5.826297] systemd[1]: Listening on udev Control Socket.
[    5.826323] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.826347] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.826376] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.826482] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.826492] systemd[1]: Reached target Remote File Systems.
[    5.826519] systemd[1]: Listening on Journal Socket.
[    5.826543] systemd[1]: Listening on Syslog Socket.
[    5.826582] systemd[1]: Created slice User and Session Slice.
[    5.826636] systemd[1]: Listening on Journal Audit Socket.
[    5.826665] systemd[1]: Created slice System Slice.
[    5.839738] systemd[1]: Starting Journal Service...
[    5.903789] systemd[1]: Starting Set console keymap...
[    5.903888] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    5.907107] systemd[1]: Starting Load Kernel Modules...
[    5.907466] systemd[1]: Started Braille Device Support.
[    5.907637] systemd[1]: Reached target Slices.
[    5.908101] systemd[1]: Starting Uncomplicated firewall...
[    5.908488] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.908883] systemd[1]: Started Read required files in advance.
[    5.909259] systemd[1]: Mounting Huge Pages File System...
[    5.909589] systemd[1]: Mounting POSIX Message Queue File System...
[    5.910009] systemd[1]: Mounting Debug File System...
[    6.158295] systemd[1]: Started Uncomplicated firewall.
[    6.282386] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.291641] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.477097] systemd[1]: Mounted POSIX Message Queue File System.
[    6.477142] systemd[1]: Mounted Debug File System.
[    6.477685] systemd[1]: Mounted Huge Pages File System.
[    6.790735] lp: driver loaded but no devices found
[    6.798191] ppdev: user-space parallel port driver
[    6.799491] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    6.799585] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[    6.799589] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[    6.799651] nouveau 0000:01:00.0: DRM: suspending console...
[    6.799654] nouveau 0000:01:00.0: DRM: suspending display...
[    6.799664] nouveau 0000:01:00.0: DRM: evicting buffers...
[    6.799666] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[    6.799718] nouveau 0000:01:00.0: DRM: suspending client object trees...
[    6.799860] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[    6.966659] systemd[1]: Started Load Kernel Modules.
[    7.151588] systemd[1]: Mounting FUSE Control File System...
[    7.151977] systemd[1]: Starting Apply Kernel Variables...
[    7.154027] systemd[1]: Started Journal Service.
[    9.075689] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    9.665953] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input17
[    9.731450] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.762419] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[    9.762425] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.762428] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[    9.762431] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[    9.762434] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.762435] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[    9.762437] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[    9.762439] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.762440] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[    9.762442] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[    9.762445] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.762445] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.011466] systemd-journald[235]: Received request to flush runtime journal from PID 1
[   10.047095] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[   10.047130] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[   10.047157] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[   10.047212] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[   10.059652] bcma: bus0: Bus registered
[   10.284520] AVX version of gcm_enc/dec engaged.
[   10.284523] AES CTR mode by8 optimization enabled
[   10.631606] media: Linux media interface: v0.10
[   10.790865] Linux video capture interface: v2.00
[   11.036480] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (1bcf:2c02)
[   11.067808] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input18
[   11.067864] usbcore: registered new interface driver uvcvideo
[   11.067865] USB Video Class driver (1.1.1)
[   11.112540] kvm: disabled by bios
[   11.299084] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   11.299089] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.299091] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   11.299094] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   11.299095] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   11.299098] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   11.299101] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   11.314025] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   11.314073] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[   11.314114] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[   11.378162] intel_rapl: Found RAPL domain package
[   11.378165] intel_rapl: Found RAPL domain core
[   11.378166] intel_rapl: Found RAPL domain uncore
[   11.378170] intel_rapl: RAPL package 0 domain package locked by BIOS
[   13.775258] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[   13.775265] b43: probe of bcma0:1 failed with error -524
[   13.775281] Broadcom 43xx driver loaded [ Features: PNL ]
[   13.902328] cfg80211: World regulatory domain updated:
[   13.902331] cfg80211:  DFS Master region: unset
[   13.902332] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   13.902334] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   13.902335] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   13.902336] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   13.902338] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   13.902339] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   13.902340] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   13.902341] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   13.902343] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   13.982468] brcmsmac bcma0:1: mfg 4bf core 812 rev 24 class 0 irq 18
[   14.075908] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.076224] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 499
[   14.076835] brcmsmac bcma0:1 wlp4s0b1: renamed from wlan0
[   14.095889] cfg80211: Regulatory domain changed to country: US
[   14.095893] cfg80211:  DFS Master region: FCC
[   14.095894] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   14.095897] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   14.095899] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[   14.095901] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[   14.095903] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
[   14.095905] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   14.095907] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   21.302434] Adding 6152188k swap on /dev/sda3.  Priority:-1 extents:1 across:6152188k FS
[   21.328303] audit: type=1400 audit(1487319632.585:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=766 comm="apparmor_parser"
[   21.328311] audit: type=1400 audit(1487319632.585:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=766 comm="apparmor_parser"
[   21.328317] audit: type=1400 audit(1487319632.585:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=766 comm="apparmor_parser"
[   21.328321] audit: type=1400 audit(1487319632.585:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=766 comm="apparmor_parser"
[   21.328968] audit: type=1400 audit(1487319632.585:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=769 comm="apparmor_parser"
[   21.329619] audit: type=1400 audit(1487319632.585:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=765 comm="apparmor_parser"
[   21.329628] audit: type=1400 audit(1487319632.585:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=765 comm="apparmor_parser"
[   21.330717] audit: type=1400 audit(1487319632.585:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=772 comm="apparmor_parser"
[   21.330725] audit: type=1400 audit(1487319632.585:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=772 comm="apparmor_parser"
[   21.331220] audit: type=1400 audit(1487319632.585:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=773 comm="apparmor_parser"
[   21.404063] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[   21.550702] nouveau 0000:01:00.0: DRM: resuming client object trees...
[   21.550710] nouveau 0000:01:00.0: DRM: resuming display...
[   21.550726] nouveau 0000:01:00.0: DRM: resuming console...
[   25.054595] IPv6: ADDRCONF(NETDEV_UP): wlp4s0b1: link is not ready
[   25.424541] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   25.424584] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[   25.425234] IPv6: ADDRCONF(NETDEV_UP): wlp4s0b1: link is not ready
[   25.530026] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   25.859055] r8169 0000:03:00.0 enp3s0: link down
[   25.859103] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   26.344023] IPv6: ADDRCONF(NETDEV_UP): wlp4s0b1: link is not ready
[   27.008421] wlp4s0b1: authenticate with 90:ef:68:e7:95:00
[   27.012024] wlp4s0b1: send auth to 90:ef:68:e7:95:00 (try 1/3)
[   27.013523] wlp4s0b1: authenticated
[   27.015986] wlp4s0b1: associate with 90:ef:68:e7:95:00 (try 1/3)
[   27.019703] wlp4s0b1: RX AssocResp from 90:ef:68:e7:95:00 (capab=0x411 status=0 aid=1)
[   27.020368] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[   27.020371] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   27.020378] wlp4s0b1: associated
[   27.020387] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0b1: link becomes ready
[   27.032861] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 159/256 dur 1778/1504
[   27.047193] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 137/256 dur 1602/1504
[   27.323952] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[  111.850116] brcmsmac bcma0:1: START: tid 1 is not agg'able
[  111.870106] brcmsmac bcma0:1: START: tid 1 is not agg'able
[  112.094129] brcmsmac bcma0:1: START: tid 1 is not agg'able


[mendirec]

[mention=618330]@zuL4[/mention] Çıktıda Secure Boot ile ilgili bir şey yok. Ek sürücülerden test edildi yazan sürücü yükle ve sistemi yeniden başlat.
Oturum açıldıktan sonra Nvidia'ya ait uygulamadan kartlar arasında geçiş yapabilirsin.

Oturum açılmaz ise Ctrl + Alt + F1 ile komut satırına düş. Komutları sırasıyla yürüt.

Kod Seç Genişlet

sudo apt remove nvidia*
sudo reboot

[zuL4]

Ek sürücüler kısmında hiçbir sürücüde test edildi gibi bir ibare yok. Diğer tüm sürücüler NVIDIA diye başlarken şuan seçili olan X.Org diye başlayan bir şey. Şimdi zaten benim sorunun bumblebee ile vs değil. 21. yy da Nvidia ile Linux arasında bir savaş mı var onu da bilmiyorum ama nedense bu ekran kartı olayı bende kronik bir soruna dönüştü. Ben bilgisayarı hızlı ve verimli kullanabilirsem benim için sorun yok ama mesela mouse imleci bazen kayboluyor, bazen internet tarayıcısı açılmıyor vs. Bu sorunların ekran kartı ile ilgili olduğunu düşündüğümden dolayı bir çözüm arıyorum.

[mendirec]

Şuna bakabilir miyim?

Kod Seç Genişlet

ubuntu-drivers list

[zuL4]

Buyrun;

Kod Seç Genişlet


nvidia-370
nvidia-340
nvidia-304
nvidia-367
intel-microcode
nvidia-375
bcmwl-kernel-source
nvidia-378


Düzenleme: Mesela şuan hiçbir şey yapmama rağmen ekranın dörtte biri siyah oldu. Enteresan

[mendirec]

Kod Seç Genişlet

sudo apt install nvidia-367
Sistemi yeniden başlatmadan önce komutun çıktısına bakalım. Daha sonra sistemi yeniden başlatırsın.

[zuL4]

Kod Seç Genişlet


Paket listeleri okunuyor... Bitti
Bağımlılık ağacı oluşturuluyor       
Durum bilgisi okunuyor... Bitti     
Aşağıdaki paketler otomatik olarak kurulmuş ve artık bu paketlere gerek duyulmuyor:
  gcc-5-base:i386 libbsd0:i386 libdrm-amdgpu1:i386 libdrm-intel1:i386
  libdrm-nouveau2:i386 libdrm-radeon1:i386 libdrm2:i386 libedit2:i386
  libelf1:i386 libexpat1:i386 libffi6:i386 libgl1-mesa-dri:i386
  libgl1-mesa-glx:i386 libglapi-mesa:i386 libllvm3.8:i386 libpciaccess0:i386
  libstdc++6:i386 libtxc-dxtn-s2tc0:i386 libx11-6:i386 libx11-xcb1:i386
  libxau6:i386 libxcb-dri2-0:i386 libxcb-dri3-0:i386 libxcb-glx0:i386
  libxcb-present0:i386 libxcb-sync1:i386 libxcb1:i386 libxdamage1:i386
  libxdmcp6:i386 libxext6:i386 libxfixes3:i386 libxshmfence1:i386
  libxxf86vm1:i386 primus-libs:i386 primus-libs-ia32:i386 socat
Bu paketleri kaldırmak için 'sudo apt autoremove' komutunu kullanın.
Aşağıdaki ek paketler kurulacak:
  libcuda1-367 nvidia-opencl-icd-367 nvidia-prime nvidia-settings
Aşağıdaki YENİ paketler kurulacak:
  libcuda1-367 nvidia-367 nvidia-opencl-icd-367 nvidia-prime nvidia-settings
0 paket yükseltilecek, 5 yeni paket kurulacak, 0 paket kaldırılacak ve 0 paket yükseltilmeyecek.
76,0 MB arşiv dosyası indirilecek.
Bu işlem tamamlandıktan sonra 342 MB ek disk alanı kullanılacak.
Devam etmek istiyor musunuz? [E/h] E
İndir: 1 http://tr.archive.ubuntu.com/ubuntu xenial/main amd64 nvidia-prime amd64 0.8.2 [11,1 kB]
İndir: 2 http://ppa.launchpad.net/graphics-drivers/ppa/ubuntu xenial/main amd64 nvidia-367 amd64 367.57-0ubuntu0.16.04.1+gpu16.04.1 [69,5 MB]
İndir: 3 http://ppa.launchpad.net/graphics-drivers/ppa/ubuntu xenial/main amd64 libcuda1-367 amd64 367.57-0ubuntu0.16.04.1+gpu16.04.1 [2.710 kB]
İndir: 4 http://ppa.launchpad.net/graphics-drivers/ppa/ubuntu xenial/main amd64 nvidia-opencl-icd-367 amd64 367.57-0ubuntu0.16.04.1+gpu16.04.1 [2.901 kB]
İndir: 5 http://ppa.launchpad.net/graphics-drivers/ppa/ubuntu xenial/main amd64 nvidia-settings amd64 378.09-0ubuntu0~gpu16.04.1 [880 kB]
4 dk. 55 sn.'de 76,0 MB alındı (257 kB/s)                                     
N: '/etc/apt/sources.list.d/' dizinindeki 'graphics-drivers-ubuntu-ppa-xenial.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor
N: '/etc/apt/sources.list.d/' dizinindeki 'bumblebee-ubuntu-testing-xenial.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor
Daha önce seçili olmayan nvidia-367 paketi seçiliyor.
(Veritabanı okunuyor ... 245095 dosya veya dizin kurulu durumda.)
Paket açılacak: .../nvidia-367_367.57-0ubuntu0.16.04.1+gpu16.04.1_amd64.deb ...
Paket açılıyor: nvidia-367 (367.57-0ubuntu0.16.04.1+gpu16.04.1) ...
Daha önce seçili olmayan libcuda1-367 paketi seçiliyor.
Paket açılacak: .../libcuda1-367_367.57-0ubuntu0.16.04.1+gpu16.04.1_amd64.deb ...
Paket açılıyor: libcuda1-367 (367.57-0ubuntu0.16.04.1+gpu16.04.1) ...
Daha önce seçili olmayan nvidia-opencl-icd-367 paketi seçiliyor.
Paket açılacak: .../nvidia-opencl-icd-367_367.57-0ubuntu0.16.04.1+gpu16.04.1_amd64.deb ...
Paket açılıyor: nvidia-opencl-icd-367 (367.57-0ubuntu0.16.04.1+gpu16.04.1) ...
Daha önce seçili olmayan nvidia-prime paketi seçiliyor.
Paket açılacak: .../nvidia-prime_0.8.2_amd64.deb ...
Paket açılıyor: nvidia-prime (0.8.2) ...
Daha önce seçili olmayan nvidia-settings paketi seçiliyor.
Paket açılacak: .../nvidia-settings_378.09-0ubuntu0~gpu16.04.1_amd64.deb ...
Paket açılıyor: nvidia-settings (378.09-0ubuntu0~gpu16.04.1) ...
Tetikleyiciler işleniyor: libc-bin (2.23-0ubuntu5) ...
Tetikleyiciler işleniyor: ureadahead (0.100.0-19) ...
ureadahead will be reprofiled on next reboot
Tetikleyiciler işleniyor: man-db (2.7.5-1) ...
Tetikleyiciler işleniyor: bamfdaemon (0.5.3~bzr0+16.04.20160824-0ubuntu1) ...
Rebuilding /usr/share/applications/bamf-2.index...
Tetikleyiciler işleniyor: gnome-menus (3.13.3-6ubuntu3.1) ...
Tetikleyiciler işleniyor: desktop-file-utils (0.22-1ubuntu5) ...
Tetikleyiciler işleniyor: mime-support (3.59ubuntu1) ...
Ayarlanıyor: nvidia-367 (367.57-0ubuntu0.16.04.1+gpu16.04.1) ...
update-alternatives: /etc/ld.so.conf.d/x86_64-linux-gnu_GL.conf (x86_64-linux-gnu_gl_conf) alternatifini sağlaması için /usr/lib/nvidia-367/ld.so.conf otomatik kipte kullanılıyor
update-alternatives: /etc/ld.so.conf.d/x86_64-linux-gnu_EGL.conf (x86_64-linux-gnu_egl_conf) alternatifini sağlaması için /usr/lib/nvidia-367/ld.so.conf otomatik kipte kullanılıyor
update-alternatives: /etc/ld.so.conf.d/i386-linux-gnu_GL.conf (i386-linux-gnu_gl_conf) alternatifini sağlaması için /usr/lib/nvidia-367/alt_ld.so.conf otomatik kipte kullanılıyor
update-alternatives: /etc/ld.so.conf.d/i386-linux-gnu_EGL.conf (i386-linux-gnu_egl_conf) alternatifini sağlaması için /usr/lib/nvidia-367/alt_ld.so.conf otomatik kipte kullanılıyor
update-alternatives: /usr/share/X11/xorg.conf.d/glamoregl.conf (glamor_conf) alternatifini sağlaması için /usr/share/nvidia-367/glamor.conf otomatik kipte kullanılıyor
update-initramfs: deferring update (trigger activated)
INFO:Enable nvidia-367
DEBUG:Parsing /usr/share/ubuntu-drivers-common/quirks/lenovo_thinkpad
DEBUG:Parsing /usr/share/ubuntu-drivers-common/quirks/put_your_quirks_here
DEBUG:Parsing /usr/share/ubuntu-drivers-common/quirks/dell_latitude
Sistem kullanıcısı `nvidia-persistenced' ekleniyor (UID 121) ...
Grup "nvidia-persistenced" ekleniyor (GID 129) ...
Yeni kullanıcı 'nvidia-persistenced' (UID 121) 'nvidia-persistenced' grubuyla ekleniyor ...
"/" başlangıç dizini oluşturulmuyor.
Loading new nvidia-367-367.57 DKMS files...
First Installation: checking all kernels...
Building only for 4.4.0-62-generic
Building for architecture x86_64
Building initial module for 4.4.0-62-generic
Done.

nvidia_367:
Running module version sanity check.
- Original module
   - No original module exists within this kernel
- Installation
   - Installing to /lib/modules/4.4.0-62-generic/updates/dkms/

nvidia_367_modeset.ko:
Running module version sanity check.
- Original module
   - No original module exists within this kernel
- Installation
   - Installing to /lib/modules/4.4.0-62-generic/updates/dkms/

nvidia_367_drm.ko:
Running module version sanity check.
- Original module
   - No original module exists within this kernel
- Installation
   - Installing to /lib/modules/4.4.0-62-generic/updates/dkms/

nvidia_367_uvm.ko:
Running module version sanity check.
- Original module
   - No original module exists within this kernel
- Installation
   - Installing to /lib/modules/4.4.0-62-generic/updates/dkms/

depmod.........

DKMS: install completed.
Ayarlanıyor: libcuda1-367 (367.57-0ubuntu0.16.04.1+gpu16.04.1) ...
Ayarlanıyor: nvidia-opencl-icd-367 (367.57-0ubuntu0.16.04.1+gpu16.04.1) ...
Ayarlanıyor: nvidia-prime (0.8.2) ...
Ayarlanıyor: nvidia-settings (378.09-0ubuntu0~gpu16.04.1) ...
Tetikleyiciler işleniyor: libc-bin (2.23-0ubuntu5) ...
Tetikleyiciler işleniyor: initramfs-tools (0.122ubuntu8.8) ...
update-initramfs: Generating /boot/initrd.img-4.4.0-62-generic
Tetikleyiciler işleniyor: shim-signed (1.19~16.04.1+0.8-0ubuntu2) ...
Tetikleyiciler işleniyor: ureadahead (0.100.0-19) ...
N: '/etc/apt/sources.list.d/' dizinindeki 'graphics-drivers-ubuntu-ppa-xenial.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor
N: '/etc/apt/sources.list.d/' dizinindeki 'bumblebee-ubuntu-testing-xenial.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor



[mendirec]

Sistemi yeniden başlat. Oturum açılmadığı taktirde ne yapacağını yukarıda anlattım.

[zuL4]

[mention=618342]@mendirec[/mention]

Başlattım, bir sorun yok gibi ama bilemiyorum ilerleyen zamanlarda göreceğiz.

[mendirec]

[mention=618343]@zuL4[/mention] Çıktılara bakalım.
https://forum.ubuntu-tr.net/index.php?topic=33412.0

[zuL4]

lsb_release -a

Kod Seç Genişlet


No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 16.04.2 LTS
Release: 16.04
Codename: xenial


lspci -nnk | egrep "VGA|3D|Display" -A2

Kod Seç Genişlet


00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09)
Subsystem: Lenovo 3rd Gen Core processor Graphics Controller [17aa:3977]
Kernel driver in use: i915
--
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT 630M] [10de:0de9] (rev a1)
Subsystem: Lenovo GF108M [GeForce GT 630M] [17aa:3902]
Kernel driver in use: nvidia




glxinfo | grep render

Kod Seç Genişlet


direct rendering: Yes
OpenGL renderer string: GeForce GT 630M/PCIe/SSE2
    GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
    GL_KTX_buffer_region, GL_NVX_conditional_render, GL_NVX_gpu_memory_info,
    GL_NV_conditional_render, GL_NV_copy_depth_to_color, GL_NV_copy_image,
    GL_NV_path_rendering, GL_NV_pixel_data_range, GL_NV_point_sprite,
    GL_ARB_compute_variable_group_size, GL_ARB_conditional_render_inverted,
    GL_KTX_buffer_region, GL_NVX_conditional_render, GL_NVX_gpu_memory_info,
    GL_NV_conditional_render, GL_NV_copy_depth_to_color, GL_NV_copy_image,
    GL_NV_path_rendering, GL_NV_pixel_data_range, GL_NV_point_sprite,
    GL_EXT_primitive_bounding_box, GL_EXT_render_snorm, GL_EXT_robustness,
    GL_NV_blend_equation_advanced, GL_NV_conditional_render,
    GL_NV_packed_float_linear, GL_NV_path_rendering,
    GL_OES_fbo_render_mipmap, GL_OES_geometry_point_size,


xrandr

Kod Seç Genişlet


Screen 0: minimum 8 x 8, current 1366 x 768, maximum 16384 x 16384
LVDS-1-1 connected primary 1366x768+0+0 344mm x 194mm
   1366x768      60.00*+
   1360x768      59.80    59.96 
   1024x768      60.04    60.00 
   960x720       60.00 
   928x696       60.05 
   896x672       60.01 
   960x600       60.00 
   960x540       59.99 
   800x600       60.00    60.32    56.25 
   840x525       60.01    59.88 
   800x512       60.17 
   700x525       59.98 
   640x512       60.02 
   720x450       59.89 
   640x480       60.00    59.94 
   680x384       59.80    59.96 
   576x432       60.06 
   512x384       60.00 
   400x300       60.32    56.34 
   320x240       60.05 
VGA-1-1 disconnected
HDMI-1-1 disconnected
DP-1-1 disconnected


dpkg -l | egrep "nvidia|bumblebee|nvidia-prime|fglrx"

Kod Seç Genişlet


ii  nvidia-367                                  367.57-0ubuntu0.16.04.1+gpu16.04.1            amd64        NVIDIA binary driver - version 367.57
ii  nvidia-opencl-icd-367                       367.57-0ubuntu0.16.04.1+gpu16.04.1            amd64        NVIDIA OpenCL ICD
ii  nvidia-prime                                0.8.2                                         amd64        Tools to enable NVIDIA's Prime
ii  nvidia-settings                             378.09-0ubuntu0~gpu16.04.1                    amd64        Tool for configuring the NVIDIA graphics driver



[mendirec]

Çıktılara göre bir sıkıntı yok. Şu an Nvidia aktif. İstersen Intel'e geçiş yapabilirsin. Değişikliğin geçerli olması için ya oturumu kapatıp açman ya da sistemi yeniden başlatman lazım.

[zuL4]

[mention=618352]@mendirec[/mention] Evet birkaç saattir hiçbir sorun yoktu ama şimdi bilgisayarda 10 saniye bir şey yapmayınca ekran kararıyor. Parlaklık ve kilit ekranında en az 30 dakika olarak belirttim değişen bir şey olmadı.

Düzenleme: Hal böyle olunca bende Ek Sürücüler'den tekrar X.Org yazan sürücüyü seçtim. Bu seferde ekranın yine dörtte biri siyah oluyor. Bakalım Ubuntu maceramız kaç hafta devam edecek.

[zuL4]

Başka çözüm önerisi yoksa tekrar Bumblebee kurmayı deneyeceğim.

[mendirec]

UEFI/BIOS üzerinden harici ekran kartını kapatabiliyor musun?

Moto G cihazımdan Tapatalk kullanılarak gönderildi

[zuL4]

UEFI/BIOS üzerinden harici ekran kartını kapatabiliyor musun?

Moto G cihazımdan Tapatalk kullanılarak gönderildi

BIOS üzerinde Graphic Devices kısmında iki seçenek var. Optimus ve UMA Only.
Varsayılan olarak Optimus seçiliydi şimdi değiştirdim, UMA Only yaptım. Bu seçeneği değiştirmeden önce de sürekli siyah ekran sorunu olmuyordu yani bazen oluyor bazen olmuyor. Şuanda siyah ekran yok ama muhtemelen birkaç saat sonra veya yarın yine sorun olacaktır. Sistemin ve özellikle grafik sürücülerinin sorunsuz çalışıp çalışmadığını öğrenmenin bir yolu yok mu?

[mendirec]

Şu an tek ekran kartı var. Çok büyük ihtimalle sorun olmayacaktır.

Moto G cihazımdan Tapatalk kullanılarak gönderildi

[zuL4]

Şu an tek ekran kartı var. Çok büyük ihtimalle sorun olmayacaktır.

Moto G cihazımdan Tapatalk kullanılarak gönderildi

Sorunun çözüldüğünü varsayarsak sorunun ne olduğunu öğrenebilir miyim acaba?
Sorun ne idi? Ne oldu da çözüldü acaba?

[mendirec]

Sorun çift ekran kartından, yani sürücüden kaynaklanıyor. İki ekran kartının açık kaynak sürücüleri arasında veya Nvidia'ya ait kapalı kaynak sürücü arasındaki uyumsuzluk denilebilir. Doğru mu söyledim tam emin değilim. Şu an tek ekran kartı (Intel)  var. Sürücü de açık kaynak olduğu için bir sıkıntı kalmadı.

Moto G cihazımdan Tapatalk kullanılarak gönderildi