Dizüstü bilgisayar kapanıyor. Yazılım mı donanım kaynaklı?

akaplan · 13 Kasım 2016 - 17:33:40

Ubuntu 16.04 yüklü bilgisayarım bazen açılamadan bazen açıldıktan sonra bszen de saatlerce çalışıyor ve hiçbir uyarı vermeden kapanıyor.
Sorun yazılımsal mı yoksa donanım arızasından mı kaynaklı mı olduğunu anlamams yardım edecek bir yazılım, loglara bakabileceğim yöntem var mı?

012rev3 · 13 Kasım 2016 - 17:47:30

Burada farklı log kayıtlarını bulabilirsiniz.

Kod Seç

ls -l /var/log
Fazla detaya girmeden birkaç soru sormak istiyorum.
Laptobunuzda aşırı ısınma ya da fanın dönmemesi gibi bir durum var mı?
Şöyle bir şeyi test amaçlı uygulayabilirsiniz.
Laptobunuzu grub önyükleyicisinin orada bekletin. Sistem yüklenmemişken kapanıp kapanmadığını test amaçlı. Başka bir testi canlı/live cd modunda yürütebilirsiniz. Eğer canlı cd modunda sorun yaşamıyorsanız sistem kaynaklı olması muhtemeldir.
Şimdilik aklıma gelen bunlar.

akaplan · 13 Kasım 2016 - 18:38:54

Isınma sorunu yok. Fan olağan durumda. Setup konumunda oyalanmıştım tam emin olmamakla kapanma yaşandı. Üstat ben hem komut sonucu hemde önerilerinizi bir uygulayayım.
Teşekkürler

ince eleyen · 15 Kasım 2016 - 00:13:47

Çok ilginç , benim bilgisayarda da aynı sıkıntı var. Sistemim 16.04.
Bazen açılıştan 5 dakika sonra bazen de saatler sonra siyah ekrana düşüyor.
Ben ekran kartından zannediyordum çünkü desteklenmeyen bir kart serim var.
ATI Radeon 5570
Her siyah ekran sonrası sensörleri kontrol ederim ama hiç ısınma sorunu gözükmüyor.
Bilgisayar sekiz saattir açık. İşte ısı değerleri

radeon-pci-0100
Adapter: PCI adapter
temp1: +43.0°C (crit = +120.0°C, hyst = +90.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0: +32.0°C (high = +76.0°C, crit = +100.0°C)
Core 1: +23.0°C (high = +76.0°C, crit = +100.0°C)
Komut sonuçlarını da yapıştırıyorum bazı yazılar kırmızı
$ ls -l /var/log
toplam 1927032
-rw-r--r-- 1 root root 2861 Kas 11 14:06 alternatives.log
-rw-r--r-- 1 root root 42801 Eki 29 09:23 alternatives.log.1
-rw-r----- 1 root adm 0 Kas 14 06:26 apport.log
-rw-r----- 1 root adm 111 Kas 13 19:23 apport.log.1
-rw-r----- 1 root adm 250 Kas 3 12:06 apport.log.2.gz
-rw-r----- 1 root adm 115 Eki 31 19:47 apport.log.3.gz
-rw-r----- 1 root adm 114 Eki 27 23:06 apport.log.4.gz
drwxr-xr-x 2 root root 4096 Kas 1 09:20 apt
-rw-r----- 1 syslog adm 20244 Kas 14 23:17 auth.log
-rw-r----- 1 syslog adm 246901 Kas 14 06:25 auth.log.1
-rw-r----- 1 syslog adm 34477 Kas 6 13:12 auth.log.2.gz
-rw-r----- 1 syslog adm 21346 Eki 30 12:09 auth.log.3.gz
-rw-r----- 1 syslog adm 27742 Eki 23 06:42 auth.log.4.gz
-rw-r--r-- 1 root root 57457 Nis 21 2016 bootstrap.log
-rw------- 1 root utmp 0 Kas 1 09:20 btmp
-rw------- 1 root utmp 0 Nis 21 2016 btmp.1
drwxr-xr-x 2 root root 4096 Kas 14 06:26 cups
drwxr-xr-x 2 root root 4096 Nis 16 2016 dist-upgrade
-rw-r----- 1 root adm 31 Nis 21 2016 dmesg
-rw-r--r-- 1 root root 244446 Kas 14 17:38 dpkg.log
-rw-r--r-- 1 root root 1836009 Eki 29 09:23 dpkg.log.1
-rw-r--r-- 1 root root 32032 Eki 17 19:36 faillog
-rw-r--r-- 1 root root 4396 Kas 2 20:25 fontconfig.log
drwxr-xr-x 2 root root 4096 Nis 21 2016 fsck
-rw-r--r-- 1 root root 1965 Kas 14 19:38 gpu-manager.log
drwxr-xr-x 3 root root 4096 Nis 21 2016 hp
drwxrwxr-x 2 root root 4096 Eki 17 19:45 installer
-rw-r----- 1 syslog adm 124236363 Kas 15 00:01 kern.log
-rw-r----- 1 syslog adm 1342936641 Kas 14 06:26 kern.log.1
-rw-r----- 1 syslog adm 80926283 Kas 6 13:13 kern.log.2.gz
-rw-r----- 1 syslog adm 73148312 Eki 30 12:14 kern.log.3.gz
-rw-r----- 1 syslog adm 37329502 Eki 23 06:45 kern.log.4.gz
-rw-rw-r-- 1 root utmp 292292 Eki 17 19:36 lastlog
drwxr-xr-x 2 root root 4096 Kas 14 06:26 lightdm
drwx------ 2 speech-dispatcher root 4096 Şub 18 2016 speech-dispatcher
-rw-r----- 1 syslog adm 124634601 Kas 15 00:01 syslog
-rw-r----- 1 syslog adm 130661137 Kas 14 06:26 syslog.1
-rw-r----- 1 syslog adm 8941559 Kas 13 07:06 syslog.2.gz
-rw-r----- 1 syslog adm 9797693 Kas 12 06:44 syslog.3.gz
-rw-r----- 1 syslog adm 6014820 Kas 11 06:25 syslog.4.gz
-rw-r----- 1 syslog adm 9707831 Kas 10 07:14 syslog.5.gz
-rw-r----- 1 syslog adm 10802037 Kas 9 07:16 syslog.6.gz
-rw-r----- 1 syslog adm 11052519 Kas 8 07:08 syslog.7.gz
drwxr-x--- 2 root adm 4096 Kas 1 09:20 unattended-upgrades
drwxr-xr-x 2 root root 4096 Şub 29 2016 upstart
-rw-rw-r-- 1 root utmp 134784 Kas 14 19:38 wtmp
-rw-rw-r-- 1 root utmp 128640 Kas 1 09:15 wtmp.1
-rw-r--r-- 1 root root 32641 Kas 14 19:38 Xorg.0.log
-rw-r--r-- 1 root root 33088 Kas 14 17:41 Xorg.0.log.old

Kırmızılar çıktılarda kırmızı olan yazılar.
Bir hata varmı acaba şimdiden teşekkürler.

akaplan · 16 Kasım 2016 - 20:49:09

Alıntı yapılan: 012rev3 - 13 Kasım 2016 - 17:47:30
Burada farklı log kayıtlarını bulabilirsiniz.
Kod Seç Genişlet
ls -l /var/log
Fazla detaya girmeden birkaç soru sormak istiyorum.
Laptobunuzda aşırı ısınma ya da fanın dönmemesi gibi bir durum var mı?
Şöyle bir şeyi test amaçlı uygulayabilirsiniz.
Laptobunuzu grub önyükleyicisinin orada bekletin. Sistem yüklenmemişken kapanıp kapanmadığını test amaçlı. Başka bir testi canlı/live cd modunda yürütebilirsiniz. Eğer canlı cd modunda sorun yaşamıyorsanız sistem kaynaklı olması muhtemeldir.*
Şimdilik aklıma gelen bunlar.

Evet, denedim setup ve grup ekranında bekledim ve bilgisayar kapandı. Sorun donanım kaynaklıdır diyebilir miyiz?
Ram değişikliği yaptım, fark yok sorun tekrarlıyor.
Bilgisayar dizüstü olduğundan harici bir ekran kartı yok. Ana kartla bütünleşik (onbooard mıydı) yani ?
ls -l /var/log çıktısı

Kod Seç


toplam 38332
-rw-r--r-- 1 root              root    19813 Kas  4 09:45 alternatives.log
-rw-r--r-- 1 root              root     4976 Eki 30 09:12 alternatives.log.1
-rw-r--r-- 1 root              root      255 Nis 12  2016 alternatives.log.2.gz
-rw-r--r-- 1 root              root     2957 Mar 15  2016 alternatives.log.3.gz
-rw-r----- 1 root              adm         0 Kas 16 19:55 apport.log
-rw-r----- 1 root              adm       540 Kas 15 07:41 apport.log.1
-rw-r----- 1 root              adm       273 Kas  5 08:36 apport.log.2.gz
-rw-r----- 1 root              adm       238 Nis 16  2016 apport.log.3.gz
-rw-r----- 1 root              adm       255 Nis 10  2016 apport.log.4.gz
-rw-r----- 1 root              adm       260 Nis  2  2016 apport.log.5.gz
-rw-r----- 1 root              adm       256 Mar 31  2016 apport.log.6.gz
-rw-r----- 1 root              adm       254 Mar 28  2016 apport.log.7.gz
drwxr-xr-x 2 root              root     4096 Kas  1 09:45 apt
-rw-r----- 1 syslog            adm     37924 Kas 16 19:55 auth.log
-rw-r----- 1 syslog            adm     31548 Kas 13 09:10 auth.log.1
-rw-r----- 1 syslog            adm      8074 Kas 11 18:37 auth.log.2.gz
-rw-r----- 1 syslog            adm      4596 Eki 30 08:31 auth.log.3.gz
-rw-r----- 1 syslog            adm      2969 Eki 26 07:30 auth.log.4.gz
-rw-r--r-- 1 root              root     5134 Kas  1 20:54 boot.log
-rw-r--r-- 1 root              root    61042 Şub 18  2016 bootstrap.log
-rw------- 1 root              utmp     5376 Kas  2 12:51 btmp
-rw-rw---- 1 root              utmp        0 Eki 21 10:27 btmp.1
drwxr-xr-x 2 root              root     4096 Kas 16 19:55 cups
drwxr-xr-x 3 root              root     4096 Kas  2 18:22 dist-upgrade
-rw-r----- 1 root              adm     91756 Kas  1 20:54 dmesg
-rw-r----- 1 root              adm     89627 Kas  1 18:53 dmesg.0
-rw-r----- 1 root              adm     21220 Kas  1 09:39 dmesg.1.gz
-rw-r----- 1 root              adm     21531 Eki 31 21:08 dmesg.2.gz
-rw-r----- 1 root              adm     20850 Eki 31 20:54 dmesg.3.gz
-rw-r----- 1 root              adm     21400 Eki 31 20:50 dmesg.4.gz
-rw-r--r-- 1 root              root  2060272 Kas  4 09:43 dpkg.log
-rw-r--r-- 1 root              root   397369 Eki 29 18:06 dpkg.log.1
-rw-r--r-- 1 root              root     2864 Nis 21  2016 dpkg.log.2.gz
-rw-r--r-- 1 root              root   109438 Mar 28  2016 dpkg.log.3.gz
-rw-r--r-- 1 root              root    24024 Kas  2 07:31 faillog
-rw-r--r-- 1 root              root     4394 Kas  2 18:28 fontconfig.log
drwxr-xr-x 2 root              root     4096 Şub 18  2016 fsck
-rw-r--r-- 1 root              root     2101 Kas 16 19:50 gpu-manager.log
drwxr-xr-x 3 root              root     4096 Şub 18  2016 hp
drwxrwxr-x 2 root              root     4096 Mar  6  2016 installer
-rw-r----- 1 syslog            adm  19260330 Kas 16 20:07 kern.log
-rw-r----- 1 syslog            adm   8168561 Kas 13 09:13 kern.log.1
-rw-r----- 1 syslog            adm   2031203 Kas 11 18:40 kern.log.2.gz
-rw-r----- 1 syslog            adm    346523 Eki 30 09:05 kern.log.3.gz
-rw-r----- 1 syslog            adm    101296 Eki 26 07:45 kern.log.4.gz
-rw-rw-r-- 1 root              utmp   292292 Kas  2 07:31 lastlog
drwxr-xr-x 2 root              root     4096 Kas 16 19:55 lightdm
-rw------- 1 root              root    51640 Kas  1 20:54 plymouth-debug.log
-rw-r--r-- 1 root              root     5606 Kas  2 07:27 pm-powersave.log
-rw-r--r-- 1 root              root   112155 Kas  1 09:39 pm-powersave.log.1
-rw-r--r-- 1 root              root     4015 Eki 21 10:05 pm-powersave.log.2.gz
-rw-r--r-- 1 root              root     2170 Nis  1  2016 pm-powersave.log.3.gz
-rw-r--r-- 1 root              root        0 Kas  1 09:45 pm-suspend.log
-rw-r--r-- 1 root              root    22350 Eki 29 16:56 pm-suspend.log.1
-rw-r--r-- 1 root              root     8686 Eki 18 12:44 pm-suspend.log.2.gz
-rw-r--r-- 1 root              root     4433 Mar 31  2016 pm-suspend.log.3.gz
drwxr-x--- 2 root              adm      4096 Şub 15  2016 samba
drwx------ 2 speech-dispatcher root     4096 Şub 19  2014 speech-dispatcher
-rw-r----- 1 syslog            adm     90793 Kas 16 20:07 syslog
-rw-r----- 1 syslog            adm   2135076 Kas 16 19:55 syslog.1
-rw-r----- 1 syslog            adm    818416 Kas 15 07:36 syslog.2.gz
-rw-r----- 1 syslog            adm    415133 Kas 14 07:30 syslog.3.gz
-rw-r----- 1 syslog            adm    563844 Kas 13 09:13 syslog.4.gz
-rw-r----- 1 syslog            adm    398877 Kas 12 04:31 syslog.5.gz
-rw-r----- 1 syslog            adm    280237 Kas 11 18:40 syslog.6.gz
-rw-r----- 1 syslog            adm    506572 Kas  5 08:34 syslog.7.gz
drwxrws--- 2 root              root     4096 Mar 17  2014 system-image
-rw-r--r-- 1 root              root   278938 Kas  1 20:54 udev
drwxr-x--- 2 root              adm      4096 Mar  6  2016 unattended-upgrades
drwxr-xr-x 2 root              root    12288 Kas  4 09:37 upstart
-rw-rw-r-- 1 root              utmp   138240 Kas 16 19:51 wtmp
-rw-rw-r-- 1 root              utmp   154752 Kas  1 09:39 wtmp.1
-rw-r--r-- 1 root              root    20027 Kas 16 19:51 Xorg.0.log
-rw-r--r-- 1 root              root    20027 Kas 15 18:12 Xorg.0.log.old

komut çıktısından veri alamdım. Bir önceki cevapta olduğu gibi bazı satırlar kırmızı renkli. Loglardan * bir şey çıkarabilmek için yeterince bilgi sahibi değilim.
Sorun donanım kaynaklı ise log dosyalarından * bir şey çıkarılabilir mi?

Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 16 Kasım 2016 - 21:21:00

Şimdi kapanınca fark ettim. Bilgisayar kapanmadan önce ekran, ara ara göz kırma gibi anlık git gel yapıyor.

012rev3 · 16 Kasım 2016 - 21:46:44

Öncelikle /var/log altında çeşitli log kayıtlarını bulabileceğinizi belirtmek istemiştim. Yani bu yol altında siz hangi log kaydına bakmak istiyorsanız onu açmanız gerek. Böyle yaparak sadece log dosyaları listelenmiş oldu.
Başka yöntemlerle de log kayıtlarına bakılabilir.
Diğer yandan çıktıları kod etiketi içerisine alırsanız okunması ve sayfa düzeni açısından yararlı olacaktır.

Sorun donanım kaynaklı görünüyor. Bunun farklı nedenleri olabileceği gibi ben ani kapanma sorunlarının (donanım yönünden) genellikle anakart kaynaklı olduğunu düşünüyorum.
Ram arızasında genellikle ekrana görüntü gelmez veya görüntü gelmemesi ile birlikte uyarı sesi alırsınız. Ekrana görüntü gelmemesi anakart arızalarında da görülür elbette. Bilgisayarınızı açarsınız ışık yanar fan da döner ama ekrana görüntü gelmez ve öylece kalır. Bazen de bilgisayarınız sürekli kendini yeniden başlatır. Diğer olasılık ise açılıp bir süre sonra kapanması olabilir.
Sizin durumda ekrana görüntü geliyor ancak fazla sürmeden bilgisayarınız kapanıyor olması, muhtemel kısadevre kaynaklı parça ısınması ya da bilemediğim başka bir nedenden dolayı kaynaklanıyor olabilir.
Eğer bu durum ekran çipine de yansırsa var olan ekrandan da olmanız muhtemeldir ve değişim fiyatı 400 tl yi bulabilir. Bu nedenle bilgisayarınızı yormadan en kısa sürede teknik servise göndermenizi tavsiye ederim.
Belki sorun bu kadar büyük olmayıp laptop adaptörünüzden bile kaynaklanıyor olabilir ya da kim bilir içerisine vida düşmüştür. (Masaüstü bilgisayarlarda bu olasılık daha fazla.)
Laptoplar daha kırılgan yapıya sahip oldukları için açıp kurcalarsanız daha büyük zararlar vermeniz olası. Kendiniz kurcalamayı düşünürseniz eğer çok hassas olun. Eğer bir yer açılmakta zorlanıyorsa orada vidanın olması yüksek ihtimaldir. Bunun haricinde anakarta bütünleşik donanım arızasıysa sizin yapabileceğiniz bir şey olmaz.(Gerekli parça ve bunu değiştirebilecek aletlerinizin olmadığını varsayarak.)
Ama bazı durumlarda işlemciyi söküp(bir süre beklettikten sonra tekrar takarak) fanı temizleyerek laptobunuzun tekrar düzenli çalışma ihtimali de mevcuttur.
Aklıma gelen ihtimalleri aktardım. Benim tavsiyem teknik servise yollamanız. Ve bu bilgileri de edindiğinize göre daha bilinçli olarak olası yüksek fiyatlardan, kısaca kazıklanma ihtimalinden kaçınabilirsiniz.

LinuxHacisi · 16 Kasım 2016 - 21:50:28

dmesg komutunun çıktısını gönderebilirmisiniz. Kernel kayıtlarından anlayabiliriz diye düşünüyorum. Güç yönetiminde sorun olabilir ufak bi kurulum yada ayar ile çözülecektir.

akaplan · 17 Kasım 2016 - 19:14:48

012rev3 cevabınız ve ilginize teşekkür ederim. Benim dizüstü -emektar son demlerinde olduğu için rahat davranıyorum. Defalarca çeşitli sebeplerle söktüm taktım. Bazen sabahlara kadar çalışıyor makine kapanmıyor. Son iletideki arkadaşımızın dmesg komutu çıktısı istemiş, bu gibi komutları deneyerek linux yeteneğimizi arttırmak asıl amaç aslında. Çıktıyı ekliyorum.

Kod Seç


kpln@OKFA:~$ dmesg
[    0.000000] ACPI: BOOT 0x000000007F7D4FC0 000028 (v01 DELL   CPi R    27D5091C ASL  00000061)
[    0.000000] ACPI: SSDT 0x000000007F7D43E6 00023E (v01 PmRef  Cpu0Ist  00003000 INTL 20030522)
[    0.000000] ACPI: SSDT 0x000000007F7D420E 0001D8 (v01 PmRef  Cpu0Cst  00003001 INTL 20030522)
[    0.000000] ACPI: SSDT 0x000000007F7D4013 0001FB (v01 PmRef  CpuPm    00003000 INTL 20030522)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1147MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x0000000037bfdfff]
[    0.000000]   HighMem  [mem 0x0000000037bfe000-0x000000007f7d2fff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f7d2fff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f7d2fff]
[    0.000000] On node 0 totalpages: 522097
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 2190 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 293845 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Reserving Intel graphics stolen memory at 0x7f800000-0x7fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 19 pages/cpu @f67b1000 s47436 r0 d30388 u77824
[    0.000000] pcpu-alloc: s47436 r0 d30388 u77824 alloc=19*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519867
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-45-generic root=UUID=1555d83c-59c1-4481-9641-97480b8d3a99 ro drm.debug=0xe plymouth:debug
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:0007f7d3)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 2016756K/2088388K available (7892K kernel code, 768K rwdata, 3136K rodata, 940K init, 800K bss, 71632K reserved, 0K cma-reserved, 1175380K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
                   pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                   vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                     .init : 0xc1b89000 - 0xc1c74000   ( 940 kB)
                     .data : 0xc17b55d3 - 0xc1b87040   (3910 kB)
                     .text : 0xc1000000 - 0xc17b55d3   (7893 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:440 16
[    0.000000] CPU 0 irqstacks, hard=f6038000 soft=f603a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 2097152 bytes of page_ext
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1729.060 MHz processor
[    0.004023] Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.12 BogoMIPS (lpj=6916240)
[    0.004143] pid_max: default: 32768 minimum: 301
[    0.004220] ACPI: Core revision 20150930
[    0.013363] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.013518] Security Framework initialized
[    0.013577] Yama: becoming mindful.
[    0.013665] AppArmor: AppArmor initialized
[    0.013811] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.013874] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.014351] Initializing cgroup subsys io
[    0.014415] Initializing cgroup subsys memory
[    0.014487] Initializing cgroup subsys devices
[    0.014547] Initializing cgroup subsys freezer
[    0.014607] Initializing cgroup subsys net_cls
[    0.014667] Initializing cgroup subsys perf_event
[    0.014727] Initializing cgroup subsys net_prio
[    0.014789] Initializing cgroup subsys hugetlb
[    0.014848] Initializing cgroup subsys pids
[    0.014940] Disabled fast string operations
[    0.015005] mce: CPU supports 5 MCE banks
[    0.015072] CPU0: Thermal monitoring enabled (TM1)
[    0.015145] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[    0.015204] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[    0.032011] ftrace: allocating 31294 entries in 62 pages
[    0.044157] smpboot: Max logical packages: 2
[    0.044223] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.044286] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.044804] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.088000] smpboot: CPU0: Intel(R) Pentium(R) M processor 1.73GHz (family: 0x6, model: 0xd, stepping: 0x8)
[    0.088000] Performance Events: p6 PMU driver.
[    0.088000] ... version:                0
[    0.088000] ... bit width:              32
[    0.088000] ... generic registers:      2
[    0.088000] ... value mask:             00000000ffffffff
[    0.088000] ... max period:             000000007fffffff
[    0.088000] ... fixed-purpose events:   0
[    0.088000] ... event mask:             0000000000000003
[    0.088000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.088000] x86: Booted up 1 node, 1 CPUs
[    0.088000] smpboot: Total of 1 processors activated (3458.12 BogoMIPS)
[    0.088000] devtmpfs: initialized
[    0.088340] evm: security.selinux
[    0.088394] evm: security.SMACK64
[    0.088447] evm: security.SMACK64EXEC
[    0.088501] evm: security.SMACK64TRANSMUTE
[    0.088555] evm: security.SMACK64MMAP
[    0.088609] evm: security.ima
[    0.088661] evm: security.capability
[    0.089013] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.089209] pinctrl core: initialized pinctrl subsystem
[    0.089452] RTC time: 15:59:18, date: 11/17/16
[    0.089711] NET: Registered protocol family 16
[    0.090108] EISA bus registered
[    0.090164] cpuidle: using governor ladder
[    0.090222] cpuidle: using governor menu
[    0.090279] PCCT header not found.
[    0.090441] Simple Boot Flag at 0x79 set to 0x1
[    0.090539] ACPI: bus type PCI registered
[    0.090596] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.090764] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.090848] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.090908] PCI: Using MMCONFIG for extended config space
[    0.090966] PCI: Using configuration type 1 for base access
[    0.091036] dmi type 0xB1 record - unknown flag
[    0.094163] ACPI: Added _OSI(Module Device)
[    0.094220] ACPI: Added _OSI(Processor Device)
[    0.094276] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.094333] ACPI: Added _OSI(Processor Aggregator Device)
[    0.100176] ACPI: Interpreter enabled
[    0.100245] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.100389] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.100548] ACPI: (supports S0 S3 S4 S5)
[    0.100603] ACPI: Using IOAPIC for interrupt routing
[    0.100698] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.135499] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.135566] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.135651] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.144349] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7 window] (ignored)
[    0.144353] acpi PNP0A03:00: host bridge window [io  0x0cf8-0x0cff] (ignored)
[    0.144357] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff window] (ignored)
[    0.144361] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[    0.144364] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff window] (ignored)
[    0.144368] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xdfffffff window] (ignored)
[    0.144372] acpi PNP0A03:00: host bridge window [mem 0xf0007000-0xf0007fff window] (ignored)
[    0.144375] acpi PNP0A03:00: host bridge window [mem 0xf000c000-0xfebfffff window] (ignored)
[    0.144379] acpi PNP0A03:00: host bridge window [mem 0xfec10000-0xfed1ffff window] (ignored)
[    0.144382] acpi PNP0A03:00: host bridge window [mem 0xfee10000-0xffafffff window] (ignored)
[    0.144385] PCI: root bus 00: using default resources
[    0.144639] PCI host bridge to bus 0000:00
[    0.144697] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.144757] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.144820] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.144888] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[    0.145040] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
[    0.145055] pci 0000:00:02.0: reg 0x10: [mem 0xdff00000-0xdff7ffff]
[    0.145062] pci 0000:00:02.0: reg 0x14: [io  0xec38-0xec3f]
[    0.145070] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[    0.145077] pci 0000:00:02.0: reg 0x1c: [mem 0xdfec0000-0xdfefffff]
[    0.145219] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
[    0.145232] pci 0000:00:02.1: reg 0x10: [mem 0xdff80000-0xdfffffff]
[    0.145426] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[    0.145483] pci 0000:00:1d.0: reg 0x20: [io  0xbf80-0xbf9f]
[    0.147159] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.147297] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[    0.147355] pci 0000:00:1d.1: reg 0x20: [io  0xbf60-0xbf7f]
[    0.148987] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.149129] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[    0.149187] pci 0000:00:1d.2: reg 0x20: [io  0xbf40-0xbf5f]
[    0.150836] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.150975] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[    0.151033] pci 0000:00:1d.3: reg 0x20: [io  0xbf20-0xbf3f]
[    0.152692] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.152839] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[    0.152872] pci 0000:00:1d.7: reg 0x10: [mem 0xffa80800-0xffa80bff]
[    0.152962] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.154627] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.154768] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.154900] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.155039] pci 0000:00:1e.2: [8086:266e] type 00 class 0x040100
[    0.155067] pci 0000:00:1e.2: reg 0x10: [io  0xed00-0xedff]
[    0.155080] pci 0000:00:1e.2: reg 0x14: [io  0xec40-0xec7f]
[    0.155093] pci 0000:00:1e.2: reg 0x18: [mem 0xdfebfe00-0xdfebffff]
[    0.155105] pci 0000:00:1e.2: reg 0x1c: [mem 0xdfebfd00-0xdfebfdff]
[    0.155162] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[    0.155301] pci 0000:00:1e.3: [8086:266d] type 00 class 0x070300
[    0.155329] pci 0000:00:1e.3: reg 0x10: [io  0xee00-0xeeff]
[    0.155342] pci 0000:00:1e.3: reg 0x14: [io  0xec80-0xecff]
[    0.155417] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[    0.155480] pci 0000:00:1e.3: System wakeup disabled by ACPI
[    0.155625] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[    0.155738] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.155748] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.155832] pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
[    0.155897] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0900-097f
[    0.156120] pci 0000:00:1f.2: [8086:2653] type 00 class 0x010180
[    0.156148] pci 0000:00:1f.2: reg 0x10: [io  0x01f0-0x01f7]
[    0.156161] pci 0000:00:1f.2: reg 0x14: [io  0x03f4-0x03f7]
[    0.156174] pci 0000:00:1f.2: reg 0x18: [io  0x0170-0x0177]
[    0.156186] pci 0000:00:1f.2: reg 0x1c: [io  0x0374-0x0377]
[    0.156199] pci 0000:00:1f.2: reg 0x20: [io  0xbfa0-0xbfaf]
[    0.156224] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.156287] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.156348] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.156411] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.156495] pci 0000:00:1f.2: PME# supported from D3hot
[    0.156718] pci 0000:03:00.0: [14e4:170c] type 00 class 0x020000
[    0.156747] pci 0000:03:00.0: reg 0x10: [mem 0xdfdfe000-0xdfdfffff]
[    0.156837] pci 0000:03:00.0: supports D1 D2
[    0.156841] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.156936] pci 0000:03:01.0: [1180:0476] type 02 class 0x060700
[    0.156966] pci 0000:03:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    0.156999] pci 0000:03:01.0: supports D1 D2
[    0.157003] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.157109] pci 0000:03:01.1: [1180:0552] type 00 class 0x0c0010
[    0.157141] pci 0000:03:01.1: reg 0x10: [mem 0xdfdfc800-0xdfdfcfff]
[    0.157235] pci 0000:03:01.1: supports D1 D2
[    0.157238] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.157336] pci 0000:03:01.2: [1180:0822] type 00 class 0x080501
[    0.157367] pci 0000:03:01.2: reg 0x10: [mem 0xdfdfc700-0xdfdfc7ff]
[    0.157459] pci 0000:03:01.2: supports D1 D2
[    0.157462] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.157572] pci 0000:03:03.0: [8086:4220] type 00 class 0x028000
[    0.157607] pci 0000:03:03.0: reg 0x10: [mem 0xdfdfd000-0xdfdfdfff]
[    0.157713] pci 0000:03:03.0: PME# supported from D0 D3hot D3cold
[    0.157846] pci 0000:00:1e.0: PCI bridge to [bus 03-04] (subtractive decode)
[    0.157914] pci 0000:00:1e.0:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.157923] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.157927] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.158002] pci_bus 0000:04: busn_res: can not insert [bus 04-ff] under [bus 03-04] (conflicts with (null) [bus 03-04])
[    0.158010] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 07
[    0.158014] pci_bus 0000:04: busn_res: can not insert [bus 04-07] under [bus 03-04] (conflicts with (null) [bus 03-04])
[    0.158021] pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:03 [bus 03-04]
[    0.158105] pci 0000:00:1e.0: bridge has subordinate 04 but max busn 07
[    0.158174] pci_bus 0000:00: on NUMA node 0
[    0.158588] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[    0.158930] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[    0.159269] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[    0.159607] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11)
[    0.159986] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.160601] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.161240] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.162082] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.162418] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.162479] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.162561] vgaarb: loaded
[    0.162613] vgaarb: bridge control possible 0000:00:02.0
[    0.163182] SCSI subsystem initialized
[    0.163922] libata version 3.00 loaded.
[    0.164014] ACPI: bus type USB registered
[    0.164108] usbcore: registered new interface driver usbfs
[    0.164186] usbcore: registered new interface driver hub
[    0.164258] usbcore: registered new device driver usb
[    0.164565] PCI: Using ACPI for IRQ routing
[    0.174516] PCI: pci_cache_line_size set to 64 bytes
[    0.174578] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.174581] e820: reserve RAM buffer [mem 0x7f7d3800-0x7fffffff]
[    0.174802] NetLabel: Initializing
[    0.174856] NetLabel:  domain hash size = 128
[    0.174911] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.174984] NetLabel:  unlabeled traffic allowed by default
[    0.175342] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.175430] hpet clockevent registered
[    0.175436] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.175502] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.175679] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.177025] amd_nb: Cannot enumerate AMD northbridges
[    0.177096] clocksource: Switched to clocksource hpet
[    0.193260] AppArmor: AppArmor Filesystem Enabled
[    0.193482] pnp: PnP ACPI init
[    0.204477] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
[    0.204544] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
[    0.204607] system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.204671] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.204734] system 00:00: [mem 0x00100000-0x7f7d37ff] could not be reserved
[    0.204796] system 00:00: [mem 0x7f7d3800-0x7f7fffff] has been reserved
[    0.204858] system 00:00: [mem 0x7f800000-0x7fffffff] has been reserved
[    0.204921] system 00:00: [mem 0xfeda0000-0xfedfffff] has been reserved
[    0.204983] system 00:00: [mem 0xffb00000-0xffffffff] has been reserved
[    0.205045] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
[    0.205108] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.205171] system 00:00: [mem 0xfed20000-0xfed9ffff] has been reserved
[    0.205233] system 00:00: [mem 0xf0000000-0xf0003fff] has been reserved
[    0.205295] system 00:00: [mem 0xf0004000-0xf0004fff] has been reserved
[    0.205357] system 00:00: [mem 0xf0005000-0xf0005fff] has been reserved
[    0.205419] system 00:00: [mem 0xf0006000-0xf0006fff] has been reserved
[    0.205482] system 00:00: [mem 0xf0008000-0xf000bfff] has been reserved
[    0.205544] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.205610] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.205666] pnp 00:01: disabling [io  0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.205751] pnp 00:01: disabling [io  0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.205888] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.205951] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.205991] pnp 00:02: disabling [io  0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.206077] pnp 00:02: disabling [io  0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.206161] pnp 00:02: disabling [io  0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.206291] system 00:02: [io  0xf400-0xf4fe] has been reserved
[    0.206353] system 00:02: [io  0x1080-0x10bf] has been reserved
[    0.206414] system 00:02: [io  0x10c0-0x10df] has been reserved
[    0.206474] system 00:02: [io  0x10e0-0x10ff] could not be reserved
[    0.206537] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.206610] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.206680] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.206745] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.206831] system 00:06: [io  0x0900-0x090f] has been reserved
[    0.206892] system 00:06: [io  0x0910-0x091f] has been reserved
[    0.206953] system 00:06: [io  0x0920-0x092f] has been reserved
[    0.207014] system 00:06: [io  0x0930-0x093f] has been reserved
[    0.207074] system 00:06: [io  0x0940-0x097f] has been reserved
[    0.207136] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.208349] system 00:07: [io  0x07b0-0x07bb] has been reserved
[    0.208411] system 00:07: [io  0x07c0-0x07df] has been reserved
[    0.208472] system 00:07: [io  0x0bb0-0x0bbb] has been reserved
[    0.208532] system 00:07: [io  0x0bc0-0x0bdf] has been reserved
[    0.208593] system 00:07: [io  0x0fb0-0x0fbb] has been reserved
[    0.208654] system 00:07: [io  0x0fc0-0x0fdf] has been reserved
[    0.208715] system 00:07: [io  0x13b0-0x13bb] has been reserved
[    0.208775] system 00:07: [io  0x13c0-0x13df] has been reserved
[    0.208836] system 00:07: [io  0x17b0-0x17bb] has been reserved
[    0.208896] system 00:07: [io  0x17c0-0x17df] has been reserved
[    0.208961] system 00:07: [io  0x1bb0-0x1bbb] has been reserved
[    0.209021] system 00:07: [io  0x1bc0-0x1bdf] has been reserved
[    0.209082] system 00:07: [io  0x1fb0-0x1fbb] has been reserved
[    0.209142] system 00:07: [io  0x1fc0-0x1fdf] has been reserved
[    0.209203] system 00:07: [io  0x23b0-0x23bb] has been reserved
[    0.209263] system 00:07: [io  0x23c0-0x23df] has been reserved
[    0.209324] system 00:07: [io  0x27b0-0x27bb] has been reserved
[    0.209384] system 00:07: [io  0x27c0-0x27df] has been reserved
[    0.209445] system 00:07: [io  0x2bb0-0x2bbb] has been reserved
[    0.209506] system 00:07: [io  0x2bc0-0x2bdf] has been reserved
[    0.209567] system 00:07: [io  0x2fb0-0x2fbb] has been reserved
[    0.209628] system 00:07: [io  0x2fc0-0x2fdf] has been reserved
[    0.209689] system 00:07: [io  0x33b0-0x33bb] has been reserved
[    0.209749] system 00:07: [io  0x33c0-0x33df] has been reserved
[    0.209810] system 00:07: [io  0x37b0-0x37bb] has been reserved
[    0.209871] system 00:07: [io  0x37c0-0x37df] has been reserved
[    0.209932] system 00:07: [io  0x3bb0-0x3bbb] has been reserved
[    0.209993] system 00:07: [io  0x3bc0-0x3bdf] has been reserved
[    0.210053] system 00:07: [io  0x3fb0-0x3fbb] has been reserved
[    0.210114] system 00:07: [io  0x3fc0-0x3fdf] has been reserved
[    0.210175] system 00:07: [io  0x43b0-0x43bb] has been reserved
[    0.210236] system 00:07: [io  0x43c0-0x43df] has been reserved
[    0.210296] system 00:07: [io  0x47b0-0x47bb] has been reserved
[    0.210357] system 00:07: [io  0x47c0-0x47df] has been reserved
[    0.210418] system 00:07: [io  0x4bb0-0x4bbb] has been reserved
[    0.210478] system 00:07: [io  0x4bc0-0x4bdf] has been reserved
[    0.210540] system 00:07: [io  0x4fb0-0x4fbb] has been reserved
[    0.210600] system 00:07: [io  0x4fc0-0x4fdf] has been reserved
[    0.210661] system 00:07: [io  0x53b0-0x53bb] has been reserved
[    0.210722] system 00:07: [io  0x53c0-0x53df] has been reserved
[    0.210783] system 00:07: [io  0x57b0-0x57bb] has been reserved
[    0.210844] system 00:07: [io  0x57c0-0x57df] has been reserved
[    0.210905] system 00:07: [io  0x5bb0-0x5bbb] has been reserved
[    0.210966] system 00:07: [io  0x5bc0-0x5bdf] has been reserved
[    0.211027] system 00:07: [io  0x5fb0-0x5fbb] has been reserved
[    0.211087] system 00:07: [io  0x5fc0-0x5fdf] has been reserved
[    0.211149] system 00:07: [io  0x63b0-0x63bb] has been reserved
[    0.211210] system 00:07: [io  0x63c0-0x63df] has been reserved
[    0.211271] system 00:07: [io  0x67b0-0x67bb] has been reserved
[    0.211331] system 00:07: [io  0x67c0-0x67df] has been reserved
[    0.211392] system 00:07: [io  0x6bb0-0x6bbb] has been reserved
[    0.211453] system 00:07: [io  0x6bc0-0x6bdf] has been reserved
[    0.211514] system 00:07: [io  0x6fb0-0x6fbb] has been reserved
[    0.211575] system 00:07: [io  0x6fc0-0x6fdf] has been reserved
[    0.211636] system 00:07: [io  0x73b0-0x73bb] has been reserved
[    0.211701] system 00:07: [io  0x73c0-0x73df] has been reserved
[    0.211762] system 00:07: [io  0x77b0-0x77bb] has been reserved
[    0.211823] system 00:07: [io  0x77c0-0x77df] has been reserved
[    0.211884] system 00:07: [io  0x7bb0-0x7bbb] has been reserved
[    0.211945] system 00:07: [io  0x7bc0-0x7bdf] has been reserved
[    0.212016] system 00:07: [io  0x7fb0-0x7fbb] has been reserved
[    0.212078] system 00:07: [io  0x7fc0-0x7fdf] has been reserved
[    0.212139] system 00:07: [io  0x83b0-0x83bb] has been reserved
[    0.212200] system 00:07: [io  0x83c0-0x83df] has been reserved
[    0.212261] system 00:07: [io  0x87b0-0x87bb] has been reserved
[    0.212322] system 00:07: [io  0x87c0-0x87df] has been reserved
[    0.212383] system 00:07: [io  0x8bb0-0x8bbb] has been reserved
[    0.212444] system 00:07: [io  0x8bc0-0x8bdf] has been reserved
[    0.212505] system 00:07: [io  0x8fb0-0x8fbb] has been reserved
[    0.212566] system 00:07: [io  0x8fc0-0x8fdf] has been reserved
[    0.212627] system 00:07: [io  0x93b0-0x93bb] has been reserved
[    0.212688] system 00:07: [io  0x93c0-0x93df] has been reserved
[    0.212749] system 00:07: [io  0x97b0-0x97bb] has been reserved
[    0.212810] system 00:07: [io  0x97c0-0x97df] has been reserved
[    0.212875] system 00:07: [io  0x9bb0-0x9bbb] has been reserved
[    0.212936] system 00:07: [io  0x9bc0-0x9bdf] has been reserved
[    0.212997] system 00:07: [io  0x9fb0-0x9fbb] has been reserved
[    0.213059] system 00:07: [io  0x9fc0-0x9fdf] has been reserved
[    0.213120] system 00:07: [io  0xa3b0-0xa3bb] has been reserved
[    0.214569] system 00:07: [io  0xa3c0-0xa3df] has been reserved
[    0.214630] system 00:07: [io  0xa7b0-0xa7bb] has been reserved
[    0.214692] system 00:07: [io  0xa7c0-0xa7df] has been reserved
[    0.214753] system 00:07: [io  0xabb0-0xabbb] has been reserved
[    0.214814] system 00:07: [io  0xabc0-0xabdf] has been reserved
[    0.214875] system 00:07: [io  0xafb0-0xafbb] has been reserved
[    0.214936] system 00:07: [io  0xafc0-0xafdf] has been reserved
[    0.214998] system 00:07: [io  0xb3b0-0xb3bb] has been reserved
[    0.215059] system 00:07: [io  0xb3c0-0xb3df] has been reserved
[    0.215120] system 00:07: [io  0xb7b0-0xb7bb] has been reserved
[    0.215182] system 00:07: [io  0xb7c0-0xb7df] has been reserved
[    0.215243] system 00:07: [io  0xbbb0-0xbbbb] has been reserved
[    0.215304] system 00:07: [io  0xbbc0-0xbbdf] has been reserved
[    0.215366] system 00:07: [io  0xbfb0-0xbfbb] has been reserved
[    0.215427] system 00:07: [io  0xbfc0-0xbfdf] has been reserved
[    0.215488] system 00:07: [io  0xc3b0-0xc3bb] has been reserved
[    0.215550] system 00:07: [io  0xc3c0-0xc3df] has been reserved
[    0.215611] system 00:07: [io  0xc7b0-0xc7bb] has been reserved
[    0.215673] system 00:07: [io  0xc7c0-0xc7df] has been reserved
[    0.215734] system 00:07: [io  0xcbb0-0xcbbb] has been reserved
[    0.215795] system 00:07: [io  0xcbc0-0xcbdf] has been reserved
[    0.215857] system 00:07: [io  0xcfb0-0xcfbb] has been reserved
[    0.215918] system 00:07: [io  0xcfc0-0xcfdf] has been reserved
[    0.215979] system 00:07: [io  0xd3b0-0xd3bb] has been reserved
[    0.216050] system 00:07: [io  0xd3c0-0xd3df] has been reserved
[    0.216111] system 00:07: [io  0xd7b0-0xd7bb] has been reserved
[    0.216173] system 00:07: [io  0xd7c0-0xd7df] has been reserved
[    0.216235] system 00:07: [io  0xdbb0-0xdbbb] has been reserved
[    0.216296] system 00:07: [io  0xdbc0-0xdbdf] has been reserved
[    0.216358] system 00:07: [io  0xdfb0-0xdfbb] has been reserved
[    0.216419] system 00:07: [io  0xdfc0-0xdfdf] has been reserved
[    0.216481] system 00:07: [io  0xe3b0-0xe3bb] has been reserved
[    0.216542] system 00:07: [io  0xe3c0-0xe3df] has been reserved
[    0.216603] system 00:07: [io  0xe7b0-0xe7bb] has been reserved
[    0.216665] system 00:07: [io  0xe7c0-0xe7df] has been reserved
[    0.216726] system 00:07: [io  0xebb0-0xebbb] has been reserved
[    0.216788] system 00:07: [io  0xebc0-0xebdf] has been reserved
[    0.216849] system 00:07: [io  0xefb0-0xefbb] has been reserved
[    0.216911] system 00:07: [io  0xefc0-0xefdf] has been reserved
[    0.216973] system 00:07: [io  0xf3b0-0xf3bb] has been reserved
[    0.217034] system 00:07: [io  0xf3c0-0xf3df] has been reserved
[    0.217095] system 00:07: [io  0xf7b0-0xf7bb] has been reserved
[    0.217157] system 00:07: [io  0xf7c0-0xf7df] has been reserved
[    0.217218] system 00:07: [io  0xfbb0-0xfbbb] has been reserved
[    0.217280] system 00:07: [io  0xfbc0-0xfbdf] has been reserved
[    0.217341] system 00:07: [io  0xffb0-0xffbb] has been reserved
[    0.217403] system 00:07: [io  0xffc0-0xffdf] has been reserved
[    0.217466] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.217480] pnp: PnP ACPI: found 8 devices
[    0.217541] PnPBIOS: Disabled by ACPI PNP
[    0.255512] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.255631] pci 0000:03:01.0: res[13]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.255635] pci 0000:03:01.0: res[14]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.255643] pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 03-04] add_size 1000
[    0.255658] pci 0000:00:1e.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.255663] pci 0000:00:1e.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.255683] pci 0000:00:1e.0: BAR 13: no space for [io  size 0x1000]
[    0.255745] pci 0000:00:1e.0: BAR 13: failed to assign [io  size 0x1000]
[    0.255817] pci 0000:00:1e.0: BAR 13: no space for [io  size 0x1000]
[    0.255878] pci 0000:00:1e.0: BAR 13: failed to assign [io  size 0x1000]
[    0.255946] pci 0000:03:01.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.255950] pci 0000:03:01.0: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[    0.255954] pci 0000:03:01.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[    0.255958] pci 0000:03:01.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[    0.255962] pci 0000:03:01.0: res[13]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.255966] pci 0000:03:01.0: res[13]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[    0.255970] pci 0000:03:01.0: res[14]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[    0.255974] pci 0000:03:01.0: res[14]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[    0.255981] pci 0000:03:01.0: BAR 0: assigned [mem 0x80000000-0x80000fff]
[    0.256060] pci 0000:03:01.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[    0.256141] pci 0000:03:01.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[    0.256205] pci 0000:03:01.0: BAR 13: assigned [io  0x1400-0x14ff]
[    0.256268] pci 0000:03:01.0: BAR 14: assigned [io  0x1800-0x18ff]
[    0.256330] pci 0000:03:01.0: CardBus bridge to [bus 04-07]
[    0.256389] pci 0000:03:01.0:   bridge window [io  0x1400-0x14ff]
[    0.256452] pci 0000:03:01.0:   bridge window [io  0x1800-0x18ff]
[    0.256515] pci 0000:03:01.0:   bridge window [mem 0x84000000-0x87ffffff pref]
[    0.256596] pci 0000:03:01.0:   bridge window [mem 0x88000000-0x8bffffff]
[    0.256661] pci 0000:00:1e.0: PCI bridge to [bus 03-04]
[    0.256724] pci 0000:00:1e.0:   bridge window [mem 0xdfd00000-0xdfdfffff]
[    0.256797] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.256800] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.256804] pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff]
[    0.256808] pci_bus 0000:03: resource 4 [io  0x0000-0xffff]
[    0.256811] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff]
[    0.256814] pci_bus 0000:04: resource 0 [io  0x1400-0x14ff]
[    0.256818] pci_bus 0000:04: resource 1 [io  0x1800-0x18ff]
[    0.256821] pci_bus 0000:04: resource 2 [mem 0x84000000-0x87ffffff pref]
[    0.256825] pci_bus 0000:04: resource 3 [mem 0x88000000-0x8bffffff]
[    0.256881] NET: Registered protocol family 2
[    0.257274] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.257370] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.257484] TCP: Hash tables configured (established 8192 bind 8192)
[    0.257609] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.257681] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.257821] NET: Registered protocol family 1
[    0.257905] pci 0000:00:02.0: Video device with shadowed ROM
[    0.259899] PCI: CLS 64 bytes, default 64
[    0.260000] Trying to unpack rootfs image as initramfs...
[    1.355572] Freeing initrd memory: 36312K (f3904000 - f5c7a000)
[    1.356121] Scanning for low memory corruption every 60 seconds
[    1.356843] futex hash table entries: 512 (order: 3, 32768 bytes)
[    1.356968] audit: initializing netlink subsys (disabled)
[    1.357063] audit: type=2000 audit(1479398359.356:1): initialized
[    1.357651] Initialise system trusted keyring
[    1.357904] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.361508] zbud: loaded
[    1.361743] VFS: Disk quotas dquot_6.6.0
[    1.361872] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.362462] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.363000] fuse init (API version 7.23)
[    1.363342] Key type big_key registered
[    1.363432] Allocating IMA MOK and blacklist keyrings.
[    1.363985] Key type asymmetric registered
[    1.364067] Asymmetric key parser 'x509' registered
[    1.364150] bounce: pool size: 64 pages
[    1.364279] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.364405] io scheduler noop registered
[    1.364462] io scheduler deadline registered (default)
[    1.364583] io scheduler cfq registered
[    1.364882] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.364952] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.365086] intel_idle: does not run on family 6 model 13
[    1.365779] ACPI: AC Adapter [AC] (on-line)
[    1.365978] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.366530] ACPI: Lid Switch [LID]
[    1.366670] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.366753] ACPI: Power Button [PBTN]
[    1.366886] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.366967] ACPI: Sleep Button [SBTN]
[    1.367167] tsc: Marking TSC unstable due to TSC halts in idle
[    1.367242] ACPI: acpi_idle registered with cpuidle
[    1.373090] thermal LNXTHERM:00: registered as thermal_zone0
[    1.373149] ACPI: Thermal Zone [THM] (47 C)
[    1.380102] GHES: HEST is not enabled!
[    1.380346] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.381814] isapnp: Scanning for PnP cards...
[    1.441541] Linux agpgart interface v0.103
[    1.441692] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[    1.441776] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    1.442641] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.442885] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    1.451029] brd: module loaded
[    1.496879] loop: module loaded
[    1.497218] ata_piix 0000:00:1f.2: version 2.13
[    1.497456] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    1.673066] scsi host0: ata_piix
[    1.673266] scsi host1: ata_piix
[    1.673402] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[    1.673464] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[    1.673686] libphy: Fixed MDIO Bus: probed
[    1.673743] tun: Universal TUN/TAP device driver, 1.6
[    1.673800] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.673950] PPP generic driver version 2.4.2
[    1.674118] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.674184] ehci-pci: EHCI PCI platform driver
[    1.674484] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.674551] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.674642] ehci-pci 0000:00:1d.7: debug port 1
[    1.678602] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.678632] ehci-pci 0000:00:1d.7: irq 16, io mem 0xffa80800
[    1.722623] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.724073] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.724137] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.724215] usb usb1: Product: EHCI Host Controller
[    1.724273] usb usb1: Manufacturer: Linux 4.4.0-45-generic ehci_hcd
[    1.724333] usb usb1: SerialNumber: 0000:00:1d.7
[    1.726896] hub 1-0:1.0: USB hub found
[    1.726962] hub 1-0:1.0: 8 ports detected
[    1.727579] ehci-platform: EHCI generic platform driver
[    1.727656] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.727720] ohci-pci: OHCI PCI platform driver
[    1.727795] ohci-platform: OHCI generic platform driver
[    1.727868] uhci_hcd: USB Universal Host Controller Interface driver
[    1.728156] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.728221] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.728307] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.728385] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
[    1.728514] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.728577] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.728654] usb usb2: Product: UHCI Host Controller
[    1.728712] usb usb2: Manufacturer: Linux 4.4.0-45-generic uhci_hcd
[    1.728772] usb usb2: SerialNumber: 0000:00:1d.0
[    1.729030] hub 2-0:1.0: USB hub found
[    1.729094] hub 2-0:1.0: 2 ports detected
[    1.729532] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.729597] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.729681] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.729773] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
[    1.729901] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.729964] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.730041] usb usb3: Product: UHCI Host Controller
[    1.730099] usb usb3: Manufacturer: Linux 4.4.0-45-generic uhci_hcd
[    1.730159] usb usb3: SerialNumber: 0000:00:1d.1
[    1.730339] ACPI: Battery Slot [BAT0] (battery present)
[    1.731912] hub 3-0:1.0: USB hub found
[    1.731975] hub 3-0:1.0: 2 ports detected
[    1.732446] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.732510] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.732595] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.732682] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
[    1.732810] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.732872] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.732950] usb usb4: Product: UHCI Host Controller
[    1.733008] usb usb4: Manufacturer: Linux 4.4.0-45-generic uhci_hcd
[    1.733068] usb usb4: SerialNumber: 0000:00:1d.2
[    1.733365] hub 4-0:1.0: USB hub found
[    1.733428] hub 4-0:1.0: 2 ports detected
[    1.733883] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.733948] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.734031] uhci_hcd 0000:00:1d.3: detected 2 ports
[    1.734119] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20
[    1.734244] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.734307] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.734385] usb usb5: Product: UHCI Host Controller
[    1.734442] usb usb5: Manufacturer: Linux 4.4.0-45-generic uhci_hcd
[    1.734503] usb usb5: SerialNumber: 0000:00:1d.3
[    1.734749] hub 5-0:1.0: USB hub found
[    1.734812] hub 5-0:1.0: 2 ports detected
[    1.735163] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.739915] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.739977] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.740291] mousedev: PS/2 mouse device common for all mice
[    1.740613] rtc_cmos 00:05: RTC can wake from S4
[    1.740836] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.740927] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.741030] i2c /dev entries driver
[    1.741198] device-mapper: uevent: version 1.0.3
[    1.741373] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.741495] platform eisa.0: Probing EISA bus 0
[    1.741559] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.741662] platform eisa.0: EISA: Detected 0 cards
[    1.741744] cpufreq-nforce2: No nForce2 chipset.
[    1.741812] ledtrig-cpu: registered to indicate activity on CPUs
[    1.742398] NET: Registered protocol family 10
[    1.742856] NET: Registered protocol family 17
[    1.742934] Key type dns_resolver registered
[    1.743331] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[    1.743445] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.743555] Using IPI No-Shortcut mode
[    1.743867] registered taskstats version 1
[    1.743944] Loading compiled-in X.509 certificates
[    1.749964] Loaded X.509 cert 'Build time autogenerated kernel key: 269c8541c5a984b2610c4e64b4663aeac53a1fa7'
[    1.750108] zswap: loaded using pool lzo/zbud
[    1.750476] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.754491] Key type trusted registered
[    1.805344] isapnp: No Plug & Play device found
[    1.805457] Key type encrypted registered
[    1.805518] AppArmor: AppArmor sha1 policy hashing enabled
[    1.805579] ima: No TPM chip found, activating TPM-bypass!
[    1.805679] evm: HMAC attrs: 0x1
[    1.806098]   Magic number: 8:342:993
[    1.806290] rtc_cmos 00:05: setting system clock to 2016-11-17 15:59:20 UTC (1479398360)
[    1.806848] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.806908] EDD information not available.
[    1.807057] PM: Hibernation image not present or could not be loaded.
[    1.833037] ata2.00: ATAPI: Optiarc DVD+/-RW AD-5560A, DD11, max UDMA/33
[    1.848387] ata2.00: configured for UDMA/33
[    1.881755] ata1.00: ATA-6: FUJITSU MHV2080AH, 00000096, max UDMA/100
[    1.881816] ata1.00: 156301488 sectors, multi 8: LBA 
[    1.881875] ata1.00: applying bridge limits
[    1.896665] ata1.00: configured for UDMA/100
[    1.896877] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2080A 0096 PQ: 0 ANSI: 5
[    1.897296] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.897496] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.897650] sd 0:0:0:0: [sda] Write Protect is off
[    1.897709] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.897745] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.899057] scsi 1:0:0:0: CD-ROM            Optiarc  DVD+-RW AD-5560A DD11 PQ: 0 ANSI: 5
[    1.915234] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.915314] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.915562] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.915740] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.955147]  sda: sda1 sda2 < sda5 >
[    1.955659] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.956223] Freeing unused kernel memory: 940K (c1b89000 - c1c74000)
[    1.956381] Write protecting the kernel text: 7896k
[    1.956479] Write protecting the kernel read-only data: 3140k
[    1.956537] NX-protecting the kernel data: 6440k
[    1.973380] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    1.973566] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    1.973832] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    1.974046] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    1.974242] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    1.974434] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    1.974629] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    1.974824] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    1.975028] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    1.975229] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    2.077161] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[    2.077576] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input5
[    2.081581] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    2.234007] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    2.327163] sdhci: Secure Digital Host Controller Interface driver
[    2.327243] sdhci: Copyright(c) Pierre Ossman
[    2.367715] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xb815c1c309, max_idle_ns: 440795220382 ns
[    2.408006] [drm] Initialized drm 1.1.0 20060810
[    2.477829] sdhci-pci 0000:03:01.2: SDHCI controller found [1180:0822] (rev 17)
[    2.479095] sdhci-pci 0000:03:01.2: No vmmc regulator found
[    2.479155] sdhci-pci 0000:03:01.2: No vqmmc regulator found
[    2.496051] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[    2.519606] mmc0: SDHCI controller on PCI [0000:03:01.2] using DMA
[    2.540666] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00
[    2.540740] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[    2.540747] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[    2.540754] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[    2.634299] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[    2.634681] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[    2.652693] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:14:22:ec:47:b2
[    2.692784] [drm:i915_dump_device_info] i915 device info: gen=3, pciid=0x2592 rev=0x03 flags=is_mobile,has_fbc,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,
[    2.692818] [drm:intel_detect_pch] No PCH found.
[    2.692828] [drm] Memory usable by graphics device = 256M
[    2.692892] [drm:i915_gem_gtt_init] GMADR size = 256M
[    2.692895] [drm:i915_gem_gtt_init] GTT stolen size = 8M
[    2.692897] [drm:i915_gem_gtt_init] ppgtt mode: 0
[    2.692900] [drm] Replacing VGA console driver
[    2.694341] Console: switching to colour dummy device 80x25
[    2.695883] usb 3-1: New USB device found, idVendor=413c, idProduct=8103
[    2.695898] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.696223] firewire_ohci 0000:03:01.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    2.697105] [drm:intel_opregion_setup] graphic opregion physical addr: 0x0
[    2.697109] [drm:intel_opregion_setup] ACPI OpRegion not supported!
[    2.697143] [drm:intel_device_info_runtime_init] slice total: 0
[    2.697145] [drm:intel_device_info_runtime_init] subslice total: 0
[    2.697148] [drm:intel_device_info_runtime_init] subslice per slice: 0
[    2.697150] [drm:intel_device_info_runtime_init] EU total: 0
[    2.697152] [drm:intel_device_info_runtime_init] EU per subslice: 0
[    2.697154] [drm:intel_device_info_runtime_init] has slice power gating: n
[    2.697156] [drm:intel_device_info_runtime_init] has subslice power gating: n
[    2.697159] [drm:intel_device_info_runtime_init] has EU power gating: n
[    2.697161] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.697168] [drm] Driver supports precise vblank timestamp query.
[    2.697176] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz
[    2.697201] [drm:validate_vbt] Using VBT from PCI ROM: $VBT ALVISO         d
[    2.697205] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 0 lvds_use_ssc 1 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0
[    2.697208] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
[    2.697212] [drm:parse_lfp_panel_data] DRRS supported mode is static
[    2.697216] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[    2.697221] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 0 68940 1280 1296 1344 1408 800 801 804 816 0x8 0xa
[    2.697224] [drm:parse_lfp_panel_data] VBT initial LVDS value 40300300
[    2.697227] [drm:parse_lfp_backlight] PWM backlight not present in VBT (type 0)
[    2.697230] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[    2.697234] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[    2.697237] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
[    2.697240] [drm:parse_driver_features] DRRS State Enabled:0
[    2.697243] [drm:parse_psr] No PSR BDB found.
[    2.697259] [drm:intel_dsm_pci_probe] no _DSM method for intel device
[    2.697269] [drm:i915_stolen_to_physical] GTT within stolen memory at 0x7ffc0000-0x7fffffff
[    2.697271] [drm:i915_stolen_to_physical] Stolen memory adjusted to 0x7f800000-0x7ffbffff
[    2.697278] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 7936K, usable: 7936K
[    2.697281] [drm:intel_power_well_enable] enabling always-on
[    2.699117] [drm:intel_modeset_init] 2 display pipes available.
[    2.699127] [drm:intel_crtc_init] swapping pipes & planes for FBC
[    2.699130] [drm:intel_modeset_init] pipe A sprite A init failed: -19
[    2.699137] [drm:intel_crtc_init] swapping pipes & planes for FBC
[    2.699139] [drm:intel_modeset_init] pipe B sprite B init failed: -19
[    2.699143] [drm:intel_update_cdclk] Current CD clock rate: 190000 kHz
[    2.699146] [drm:intel_update_max_cdclk] Max CD clock rate: 190000 kHz
[    2.699148] [drm:intel_update_max_cdclk] Max dotclock rate: 342000 kHz
[    2.699153] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.710562] usb 5-1: New USB device found, idVendor=046d, idProduct=c52b
[    2.710572] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.710581] usb 5-1: Product: USB Receiver
[    2.710588] usb 5-1: Manufacturer: Logitech
[    2.754874] hidraw: raw HID events driver (C) Jiri Kosina
[    2.792643] usbcore: registered new interface driver usbhid
[    2.792657] usbhid: USB HID core driver
[    2.799967] [drm:intel_lvds_init] using preferred mode from EDID: 
[    2.799974] [drm:drm_mode_debug_printmodeline] Modeline 32:"1280x800" 60 68940 1280 1296 1344 1408 800 801 804 816 0x48 0xa
[    2.799982] [drm:intel_lvds_init] detected single-link lvds configuration
[    2.800058] [drm:intel_panel_setup_backlight] no backlight present per VBT
[    2.800219] [drm:intel_modeset_readout_hw_state] [CRTC:25] hw state readout: disabled
[    2.800230] [drm:intel_modeset_readout_hw_state] [CRTC:28] hw state readout: enabled
[    2.800236] [drm:intel_modeset_readout_hw_state] [ENCODER:30:LVDS-30] hw state readout: enabled, pipe B
[    2.800239] [drm:intel_modeset_readout_hw_state] [ENCODER:36:DAC-36] hw state readout: disabled, pipe A
[    2.800243] [drm:intel_modeset_readout_hw_state] [ENCODER:38:TV-38] hw state readout: disabled, pipe A
[    2.800246] [drm:intel_modeset_readout_hw_state] [CONNECTOR:29:LVDS-1] hw state readout: enabled
[    2.800249] [drm:intel_modeset_readout_hw_state] [CONNECTOR:35:VGA-1] hw state readout: disabled
[    2.800252] [drm:intel_modeset_readout_hw_state] [CONNECTOR:37:SVIDEO-1] hw state readout: disabled
[    2.800264] [drm:intel_dump_pipe_config] [CRTC:25][setup_hw_state] config f55ef400 for pipe A
[    2.800266] [drm:intel_dump_pipe_config] cpu_transcoder: A
[    2.800269] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[    2.800272] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    2.800275] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    2.800278] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    2.800280] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    2.800282] [drm:intel_dump_pipe_config] requested mode:
[    2.800286] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    2.800288] [drm:intel_dump_pipe_config] adjusted mode:
[    2.800292] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    2.800296] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[    2.800298] [drm:intel_dump_pipe_config] port clock: 0
[    2.800300] [drm:intel_dump_pipe_config] pipe src size: 0x0
[    2.800303] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[    2.800306] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    2.800308] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    2.800310] [drm:intel_dump_pipe_config] ips: 0
[    2.800312] [drm:intel_dump_pipe_config] double wide: 0
[    2.800315] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
[    2.800317] [drm:intel_dump_pipe_config] planes on this crtc
[    2.800321] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
[    2.800324] [drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 0.1 idx: 1 disabled, scaler_id = 0
[    2.800337] [drm:intel_dump_pipe_config] [CRTC:28][setup_hw_state] config f302dc00 for pipe B
[    2.800340] [drm:intel_dump_pipe_config] cpu_transcoder: B
[    2.800342] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[    2.800345] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    2.800348] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    2.800351] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    2.800354] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    2.800356] [drm:intel_dump_pipe_config] requested mode:
[    2.800360] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 60 69143 1280 1296 1344 1408 800 801 804 816 0x40 0xa
[    2.800362] [drm:intel_dump_pipe_config] adjusted mode:
[    2.800366] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 60 69143 1280 1296 1344 1408 800 801 804 816 0x40 0xa
[    2.800370] [drm:intel_dump_crtc_timings] crtc timings: 69143 1280 1296 1344 1408 800 801 804 816, type: 0x40 flags: 0xa
[    2.800373] [drm:intel_dump_pipe_config] port clock: 69143
[    2.800375] [drm:intel_dump_pipe_config] pipe src size: 640x400
[    2.800378] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[    2.800381] [drm:intel_dump_pipe_config] gmch pfit: control: 0x80006668, ratios: 0x00000000, lvds border: 0x00000000
[    2.800383] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    2.800385] [drm:intel_dump_pipe_config] ips: 0
[    2.800387] [drm:intel_dump_pipe_config] double wide: 0
[    2.800390] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x98026000, dpll_md: 0x0, fp0: 0x41409, fp1: 0x31108
[    2.800393] [drm:intel_dump_pipe_config] planes on this crtc
[    2.800396] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 1.0 idx: 2 disabled, scaler_id = 0
[    2.800399] [drm:intel_dump_pipe_config] CURSOR PLANE:27 plane: 1.2 idx: 3 disabled, scaler_id = 0
[    2.800408] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [0, ffff000]
[    2.802899] [drm:i915_gem_context_init] fake context support initialized
[    2.802904] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
[    2.802912] [drm:i915_pages_create_for_stolen] offset=0x0, size=131072
[    2.802967] [drm:intel_update_cdclk] Current CD clock rate: 190000 kHz
[    2.803001] [drm] initialized overlay support
[    2.803011] [drm:intel_fbdev_init_bios] pipe A not active or no fb, skipping
[    2.803013] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping
[    2.803015] [drm:intel_fbdev_init_bios] no active fbs found, not using BIOS config
[    2.803037] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:LVDS-1]
[    2.803040] [drm:intel_lvds_detect] [CONNECTOR:29:LVDS-1]
[    2.803043] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:LVDS-1] status updated from 3 to 1
[    2.803058] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:LVDS-1] probed modes :
[    2.803064] [drm:drm_mode_debug_printmodeline] Modeline 32:"1280x800" 60 68940 1280 1296 1344 1408 800 801 804 816 0x48 0xa
[    2.803066] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:VGA-1]
[    2.803070] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=1
[    2.804265] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[    2.804269] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[    2.810287] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[    2.810291] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[    2.810294] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    2.810297] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[    2.810567] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[    2.810570] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[    2.810572] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[    2.810576] [drm:intel_get_load_detect_pipe] [CONNECTOR:35:VGA-1], [ENCODER:36:DAC-36]
[    2.810584] [drm:intel_get_load_detect_pipe] creating tmp fb for load-detection
[    2.810611] [drm:intel_get_load_detect_pipe] failed to set mode on load-detect pipe
[    2.812739] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[    2.812742] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[    2.820971] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[    2.820975] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[    2.820978] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    2.820981] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[    2.821251] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[    2.821254] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[    2.821258] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:SVIDEO-1]
[    2.821261] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=1
[    2.821264] [drm:intel_get_load_detect_pipe] [CONNECTOR:37:SVIDEO-1], [ENCODER:38:TV-38]
[    2.821272] [drm:intel_get_load_detect_pipe] creating tmp fb for load-detection
[    2.821285] [drm:intel_get_load_detect_pipe] failed to set mode on load-detect pipe
[    2.821298] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:SVIDEO-1] probed modes :
[    2.821302] [drm:drm_mode_debug_printmodeline] Modeline 58:"848x480" 60 29027 848 849 912 944 480 481 512 513 0x48 0x0
[    2.821307] [drm:drm_mode_debug_printmodeline] Modeline 55:"640x480" 60 22631 640 641 704 736 480 481 512 513 0x48 0x0
[    2.821311] [drm:drm_mode_debug_printmodeline] Modeline 57:"1024x768" 60 53773 1024 1025 1088 1120 768 769 800 801 0x40 0x0
[    2.821316] [drm:drm_mode_debug_printmodeline] Modeline 56:"800x600" 60 33996 800 801 864 896 600 601 632 633 0x40 0x0
[    2.821321] [drm:drm_setup_crtcs] 
[    2.821327] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=0
[    2.821344] [drm:drm_enable_connectors] connector 29 enabled? yes
[    2.821346] [drm:drm_enable_connectors] connector 35 enabled? no
[    2.821349] [drm:drm_enable_connectors] connector 37 enabled? no
[    2.821352] [drm:intel_fb_initial_config] looking for cmdline mode on connector LVDS-1
[    2.821355] [drm:intel_fb_initial_config] looking for preferred mode on connector LVDS-1 0
[    2.821359] [drm:intel_fb_initial_config] connector LVDS-1 on pipe B [CRTC:28]: 1280x800
[    2.821361] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
[    2.821364] [drm:intel_fb_initial_config] connector SVIDEO-1 not enabled, skipping
[    2.821367] [drm:drm_setup_crtcs] desired mode 1280x800 set on crtc 28 (0,0)
[    2.821371] [drm:intelfb_create] no BIOS fb, allocating a new one
[    2.826429] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[    2.826437] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[    2.829307] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[    2.829312] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[    2.829315] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    2.829318] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[    2.829589] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[    2.829591] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[    2.829594] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[    2.829598] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=0
[    2.829680] [drm:intelfb_create] allocated 1280x800 fb: 0x00020000, bo f57b4280
[    2.829799] fbcon: inteldrmfb (fb0) is primary device
[    2.829931] [drm:connected_sink_compute_bpp] [CONNECTOR:29:LVDS-1] checking for sink bpp constrains
[    2.829934] [drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18)
[    2.829938] [drm:intel_modeset_pipe_config] hw max bpp: 24, pipe bpp: 18, dithering: 1
[    2.829940] [drm:intel_dump_pipe_config] [CRTC:28][modeset] config f57ffc00 for pipe B
[    2.829941] [drm:intel_dump_pipe_config] cpu_transcoder: B
[    2.829943] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
[    2.829945] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    2.829947] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    2.829949] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    2.829950] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    2.829951] [drm:intel_dump_pipe_config] requested mode:
[    2.829955] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 60 68940 1280 1296 1344 1408 800 801 804 816 0x48 0xa
[    2.829956] [drm:intel_dump_pipe_config] adjusted mode:
[    2.829959] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 60 68940 1280 1296 1344 1408 800 801 804 816 0x48 0xa
[    2.829962] [drm:intel_dump_crtc_timings] crtc timings: 68940 1280 1296 1344 1408 800 801 804 816, type: 0x48 flags: 0xa
[    2.829963] [drm:intel_dump_pipe_config] port clock: 68940
[    2.829964] [drm:intel_dump_pipe_config] pipe src size: 1280x800
[    2.829965] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[    2.829967] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[    2.829968] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    2.829969] [drm:intel_dump_pipe_config] ips: 0
[    2.829970] [drm:intel_dump_pipe_config] double wide: 0
[    2.829973] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x98026000, dpll_md: 0x0, fp0: 0x41409, fp1: 0x31108
[    2.829973] [drm:intel_dump_pipe_config] planes on this crtc
[    2.829975] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 1.0 idx: 2 disabled, scaler_id = 0
[    2.829977] [drm:intel_dump_pipe_config] CURSOR PLANE:27 plane: 1.2 idx: 3 disabled, scaler_id = 0
[    2.829984] [drm:i9xx_get_refclk] using SSC reference clock of 96000 kHz
[    2.830190] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
[    2.830195] [drm:set_no_fbc_reason] Disabling FBC: disabled per chip default
[    2.833769] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.3-1/input2
[    2.969142] input: Logitech K400 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.2/0003:046D:C52B.0003/0003:046D:400E.0004/input/input7
[    2.969738] logitech-hidpp-device 0003:046D:400E.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:1d.3-1:1
[    3.196247] firewire_core 0000:03:01.1: created device fw0: GUID 354fc00011dd8850, S400
[    3.278770] [drm:intel_disable_pipe] disabling pipe B
[    3.300129] [drm:i9xx_pfit_disable] disabling pfit, current: 0x80006668
[    3.300786] [drm:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[    3.300788] [drm:intel_calculate_wm] FIFO entries required for mode: 22
[    3.300789] [drm:intel_calculate_wm] FIFO watermark level: 4
[    3.300791] [drm:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[    3.300793] [drm:i9xx_update_wm] FIFO watermarks - A: 8, B: 29
[    3.300795] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
[    3.300797] [drm:i9xx_update_wm] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 1
[    3.300798] [drm:intel_enable_pipe] enabling pipe B
[    3.617271] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6
[    4.122299] [drm:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[    4.122300] [drm:intel_calculate_wm] FIFO entries required for mode: 22
[    4.122301] [drm:intel_calculate_wm] FIFO watermark level: 4
[    4.122303] [drm:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[    4.122304] [drm:i9xx_update_wm] FIFO watermarks - A: 8, B: 29
[    4.122306] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
[    4.122308] [drm:i9xx_update_wm] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 1
[    4.220149] [drm:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[    4.220150] [drm:intel_calculate_wm] FIFO entries required for mode: 22
[    4.220151] [drm:intel_calculate_wm] FIFO watermark level: 4
[    4.220153] [drm:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[    4.220154] [drm:i9xx_update_wm] FIFO watermarks - A: 8, B: 29
[    4.220156] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
[    4.220157] [drm:i9xx_update_wm] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 1
[    4.272142] [drm:intel_connector_check_state] [CONNECTOR:29:LVDS-1]
[    4.272145] [drm:check_encoder_state] [ENCODER:30:LVDS-30]
[    4.272147] [drm:check_encoder_state] [ENCODER:36:DAC-36]
[    4.272148] [drm:check_encoder_state] [ENCODER:38:TV-38]
[    4.272153] [drm:check_crtc_state] [CRTC:28]
[    4.272177] [drm:drm_fb_helper_hotplug_event] 
[    4.272180] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:LVDS-1]
[    4.272181] [drm:intel_lvds_detect] [CONNECTOR:29:LVDS-1]
[    4.272206] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:LVDS-1] probed modes :
[    4.272211] [drm:drm_mode_debug_printmodeline] Modeline 32:"1280x800" 60 68940 1280 1296 1344 1408 800 801 804 816 0x48 0xa
[    4.272213] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:VGA-1]
[    4.272215] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=1
[    4.276124] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[    4.276125] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[    4.280122] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[    4.280124] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[    4.280125] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    4.280127] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[    4.280395] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[    4.280397] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[    4.280398] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[    4.280401] [drm:intel_get_load_detect_pipe] [CONNECTOR:35:VGA-1], [ENCODER:36:DAC-36]
[    4.280407] [drm:intel_get_load_detect_pipe] reusing fbdev for load-detection framebuffer
[    4.280415] [drm:intel_get_load_detect_pipe] failed to set mode on load-detect pipe
[    4.284125] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[    4.284126] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[    4.288121] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[    4.288122] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[    4.288123] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    4.288125] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[    4.288391] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[    4.288392] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[    4.288394] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:SVIDEO-1]
[    4.288396] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=1
[    4.288398] [drm:intel_get_load_detect_pipe] [CONNECTOR:37:SVIDEO-1], [ENCODER:38:TV-38]
[    4.288401] [drm:intel_get_load_detect_pipe] creating tmp fb for load-detection
[    4.288423] [drm:intel_get_load_detect_pipe] failed to set mode on load-detect pipe
[    4.288435] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:SVIDEO-1] probed modes :
[    4.288438] [drm:drm_mode_debug_printmodeline] Modeline 58:"848x480" 60 29027 848 849 912 944 480 481 512 513 0x48 0x0
[    4.288441] [drm:drm_mode_debug_printmodeline] Modeline 55:"640x480" 60 22631 640 641 704 736 480 481 512 513 0x48 0x0
[    4.288445] [drm:drm_mode_debug_printmodeline] Modeline 57:"1024x768" 60 53773 1024 1025 1088 1120 768 769 800 801 0x40 0x0
[    4.288448] [drm:drm_mode_debug_printmodeline] Modeline 56:"800x600" 60 33996 800 801 864 896 600 601 632 633 0x40 0x0
[    4.288463] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    4.288748] [drm:drm_setup_crtcs] 
[    4.288750] [drm:drm_enable_connectors] connector 29 enabled? yes
[    4.288752] [drm:drm_enable_connectors] connector 35 enabled? no
[    4.288753] [drm:drm_enable_connectors] connector 37 enabled? no
[    4.288755] [drm:intel_fb_initial_config] looking for cmdline mode on connector LVDS-1
[    4.288757] [drm:intel_fb_initial_config] looking for preferred mode on connector LVDS-1 0
[    4.288760] [drm:intel_fb_initial_config] connector LVDS-1 on pipe B [CRTC:28]: 1280x800
[    4.288761] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
[    4.288762] [drm:intel_fb_initial_config] connector SVIDEO-1 not enabled, skipping
[    4.288764] [drm:drm_setup_crtcs] desired mode 1280x800 set on crtc 28 (0,0)
[    4.288827] Console: switching to colour frame buffer device 160x50
[    4.295671] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.496985] random: nonblocking pool is initialized
[    7.720896] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    9.313546] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    9.317880] systemd[1]: Detected architecture x86.
[    9.377145] systemd[1]: Set hostname to <OKFA>.
[   12.351804] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   12.356385] systemd[1]: Created slice System Slice.
[   12.360441] systemd[1]: Reached target Encrypted Volumes.
[   12.364382] systemd[1]: Listening on Journal Socket (/dev/log).
[   12.368242] systemd[1]: Reached target Remote File Systems (Pre).
[   12.372125] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   12.376088] systemd[1]: Listening on Syslog Socket.
[   12.379986] systemd[1]: Reached target User and Group Name Lookups.
[   12.383899] systemd[1]: Reached target Remote File Systems.
[   12.387879] systemd[1]: Created slice User and Session Slice.
[   12.391927] systemd[1]: Listening on udev Kernel Socket.
[   12.396082] systemd[1]: Reached target Slices.
[   12.400374] systemd[1]: Listening on Journal Socket.
[   12.405465] systemd[1]: Starting Uncomplicated firewall...
[   12.411762] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   12.418272] systemd[1]: Started Braille Device Support.
[   12.425882] systemd[1]: Mounting Huge Pages File System...
[   12.432929] systemd[1]: Mounting Debug File System...
[   12.440242] systemd[1]: Starting Set console keymap...
[   12.446551] systemd[1]: Listening on fsck to fsckd communication Socket.
[   12.452107] systemd[1]: Listening on udev Control Socket.
[   12.809250] systemd[1]: Starting Load Kernel Modules...
[   12.816883] systemd[1]: Started Read required files in advance.
[   12.825449] systemd[1]: Listening on Journal Audit Socket.
[   12.831864] systemd[1]: Mounting POSIX Message Queue File System...
[   12.834489] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=0
[   12.836030] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   12.836031] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[   12.840038] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   12.840044] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   12.840048] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   12.840051] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[   12.840494] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   12.840498] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[   12.840500] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[   12.840505] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=0
[   12.841787] systemd[1]: Starting Journal Service...
[   12.850186] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   13.074917] systemd[1]: Started Uncomplicated firewall.
[   13.082083] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   13.161764] systemd[1]: Starting Create Static Device Nodes in /dev...
[   13.280808] systemd[1]: Mounted POSIX Message Queue File System.
[   13.289928] systemd[1]: Mounted Debug File System.
[   13.295523] systemd[1]: Mounted Huge Pages File System.
[   13.959476] lp: driver loaded but no devices found
[   14.071845] ppdev: user-space parallel port driver
[   14.278283] systemd[1]: Started Load Kernel Modules.
[   14.286028] systemd[1]: Starting Apply Kernel Variables...
[   14.296409] systemd[1]: Mounting FUSE Control File System...
[   14.306968] systemd[1]: Mounted FUSE Control File System.
[   14.620672] systemd[1]: Started Journal Service.
[   19.262188] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   20.572536] systemd-journald[218]: Received request to flush runtime journal from PID 1
[   22.848030] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=0
[   22.852171] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   22.852174] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[   22.858044] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   22.858049] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   22.858051] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   22.858055] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[   22.858324] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   22.858327] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[   22.858330] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[   22.858334] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=0
[   23.177164] intel_rng: FWH not detected
[   23.537610] yenta_cardbus 0000:03:01.0: enabling device (0000 -> 0003)
[   23.537762] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:0188]
[   23.664893] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
[   23.664900] yenta_cardbus 0000:03:01.0: Socket status: 30000006
[   23.664906] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
[   23.664919] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [mem 0xdfd00000-0xdfdfffff]
[   23.664924] pcmcia_socket pcmcia_socket0: cs: memory probe 0xdfd00000-0xdfdfffff:
[   23.664939]  excluding 0xdfdf0000-0xdfdfffff
[   24.004879] lib80211: common routines for IEEE802.11 drivers
[   24.004885] lib80211_crypt: registered algorithm 'NULL'
[   24.186061] libipw: 802.11 data/management/control stack, git-1.1.13
[   24.186067] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   24.349736] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[   24.349742] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   24.350021] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   24.987892] Bluetooth: Core ver 2.21
[   24.987923] NET: Registered protocol family 31
[   24.987926] Bluetooth: HCI device and connection manager initialized
[   24.987932] Bluetooth: HCI socket layer initialized
[   24.987937] Bluetooth: L2CAP socket layer initialized
[   24.987945] Bluetooth: SCO socket layer initialized
[   25.404339] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[   25.744097] usbcore: registered new interface driver btusb
[   26.314486] gpio_ich: ACPI BAR is busy, GPI 0 - 15 unavailable
[   26.314664] gpio_ich: GPIO from 462 to 511 on gpio_ich
[   26.644673] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   27.048205] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[   27.049199]  excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[   27.049928] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[   27.050299]  excluding 0x3f0-0x3f7 0x4d0-0x4d7
[   27.050646] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[   27.051219]  clean
[   27.051239] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[   27.051877]  clean
[   27.051900] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   27.051906]  excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xf0000-0xfffff
[   27.051941] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   27.051960]  clean
[   27.051980] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   27.051994]  excluding 0x60000000-0x60ffffff
[   27.053732] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[   27.054391]  clean
[   27.580035] snd_intel8x0 0000:00:1e.2: intel8x0_measure_ac97_clock: measured 55405 usecs (2669 samples)
[   27.580042] snd_intel8x0 0000:00:1e.2: clocking to 48000
[   29.914446] Adding 2086908k swap on /dev/sda5.  Priority:-1 extents:1 across:2086908k FS
[   30.132980] cfg80211: World regulatory domain updated:
[   30.132988] cfg80211:  DFS Master region: unset
[   30.132991] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   30.132995] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   30.132998] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   30.133001] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   30.133005] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   30.133009] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   30.133012] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   30.133015] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   30.133018] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   32.709255] audit: type=1400 audit(1479398391.400:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=574 comm="apparmor_parser"
[   32.709271] audit: type=1400 audit(1479398391.400:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=574 comm="apparmor_parser"
[   32.813257] audit: type=1400 audit(1479398391.504:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=577 comm="apparmor_parser"
[   32.813271] audit: type=1400 audit(1479398391.504:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=577 comm="apparmor_parser"
[   32.813280] audit: type=1400 audit(1479398391.504:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=577 comm="apparmor_parser"
[   32.813289] audit: type=1400 audit(1479398391.504:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=577 comm="apparmor_parser"
[   32.864033] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=0
[   32.872028] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   32.872031] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[   32.876129] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   32.876135] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   32.876138] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   32.876141] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[   32.876411] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   32.876413] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[   32.876416] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[   32.876420] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=0
[   33.129447] audit: type=1400 audit(1479398391.820:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=578 comm="apparmor_parser"
[   33.129467] audit: type=1400 audit(1479398391.820:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=578 comm="apparmor_parser"
[   33.129477] audit: type=1400 audit(1479398391.820:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=578 comm="apparmor_parser"
[   33.129487] audit: type=1400 audit(1479398391.820:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=578 comm="apparmor_parser"
[   42.368416] cgroup: new mount options do not match the existing superblock, will be ignored
[   42.487079] [drm:i915_gem_open] 
[   42.487223] [drm:i915_gem_open] 
[   42.487290] [drm:i915_gem_open] 
[   42.487354] [drm:i915_gem_open] 
[   42.912031] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=0
[   42.916100] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   42.916104] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[   42.920141] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   42.920147] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   42.920150] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   42.920153] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[   42.920425] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   42.920427] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[   42.920430] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[   42.920435] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=0
[   44.341940] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   44.341947] Bluetooth: BNEP filters: protocol multicast
[   44.341955] Bluetooth: BNEP socket layer initialized
[   45.263724] Bluetooth: RFCOMM TTY layer initialized
[   45.263738] Bluetooth: RFCOMM socket layer initialized
[   45.263745] Bluetooth: RFCOMM ver 1.11
[   45.421602] rfkill: input handler disabled
[   52.928037] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=0
[   52.932381] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   52.932385] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[   52.936197] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   52.936202] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   52.936205] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   52.936208] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[   52.936478] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   52.936481] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[   52.936483] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[   52.936488] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=0
[   54.037191] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   54.040920] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   54.100993] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   56.452612] [drm:i915_gem_open] 
[   61.670374] [drm:i915_gem_open] 
[   61.670394] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
[   61.684273] [drm:i915_gem_open] 
[   61.684294] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
[   61.684299] [drm:drm_mode_getresources] [CRTC:25]
[   61.684302] [drm:drm_mode_getresources] [CRTC:28]
[   61.684304] [drm:drm_mode_getresources] [ENCODER:30:LVDS-30]
[   61.684307] [drm:drm_mode_getresources] [ENCODER:36:DAC-36]
[   61.684309] [drm:drm_mode_getresources] [ENCODER:38:TV-38]
[   61.684312] [drm:drm_mode_getresources] [CONNECTOR:29:LVDS-1]
[   61.684314] [drm:drm_mode_getresources] [CONNECTOR:35:VGA-1]
[   61.684316] [drm:drm_mode_getresources] [CONNECTOR:37:SVIDEO-1]
[   61.684319] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
[   61.695433] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
[   61.695463] [drm:drm_mode_addfb2] [FB:62]
[   61.696880] [drm:internal_framebuffer_create] could not create framebuffer
[   61.696902] [drm:drm_mode_addfb2] [FB:62]
[   61.697039] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
[   61.697044] [drm:drm_mode_getresources] [CRTC:25]
[   61.697047] [drm:drm_mode_getresources] [CRTC:28]
[   61.697049] [drm:drm_mode_getresources] [ENCODER:30:LVDS-30]
[   61.697052] [drm:drm_mode_getresources] [ENCODER:36:DAC-36]
[   61.697054] [drm:drm_mode_getresources] [ENCODER:38:TV-38]
[   61.697056] [drm:drm_mode_getresources] [CONNECTOR:29:LVDS-1]
[   61.697059] [drm:drm_mode_getresources] [CONNECTOR:35:VGA-1]
[   61.697061] [drm:drm_mode_getresources] [CONNECTOR:37:SVIDEO-1]
[   61.697064] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
[   61.697128] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
[   61.697151] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
[   61.697444] [drm:drm_mode_getconnector] [CONNECTOR:35:?]
[   61.697452] [drm:drm_mode_getconnector] [CONNECTOR:35:?]
[   61.697495] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
[   61.697503] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
[   62.019260] lib80211_crypt: registered algorithm 'CCMP'
[   62.022161] [drm:drm_mode_addfb2] [FB:62]
[   62.473017] [drm:drm_mode_setcrtc] [CRTC:28]
[   62.473031] [drm:drm_mode_setcrtc] [CONNECTOR:29:LVDS-1]
[   62.474425] [drm:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[   62.474428] [drm:intel_calculate_wm] FIFO entries required for mode: 22
[   62.474430] [drm:intel_calculate_wm] FIFO watermark level: 4
[   62.474433] [drm:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[   62.474436] [drm:i9xx_update_wm] FIFO watermarks - A: 8, B: 29
[   62.474439] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
[   62.474442] [drm:i9xx_update_wm] self-refresh entries: 80
[   62.474445] [drm:i9xx_update_wm] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 15
[   62.474448] [drm:intel_set_memory_cxsr] memory self-refresh is enabled
[   62.944050] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=0
[   62.948341] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   62.948345] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[   62.952276] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   62.952282] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   62.952286] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   62.952289] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[   62.952560] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   62.952563] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[   62.952566] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[   62.952570] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=0
[   63.698656] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
[   63.698666] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:LVDS-1]
[   63.698669] [drm:intel_lvds_detect] [CONNECTOR:29:LVDS-1]
[   63.698696] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:LVDS-1] probed modes :
[   63.698702] [drm:drm_mode_debug_printmodeline] Modeline 32:"1280x800" 60 68940 1280 1296 1344 1408 800 801 804 816 0x48 0xa
[   63.698710] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
[   63.699109] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
[   63.699113] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:SVIDEO-1]
[   63.699117] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=1
[   63.699121] [drm:intel_get_load_detect_pipe] [CONNECTOR:37:SVIDEO-1], [ENCODER:38:TV-38]
[   63.699132] [drm:intel_get_load_detect_pipe] creating tmp fb for load-detection
[   63.699155] [drm:intel_get_load_detect_pipe] failed to set mode on load-detect pipe
[   63.699170] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:SVIDEO-1] probed modes :
[   63.699175] [drm:drm_mode_debug_printmodeline] Modeline 58:"848x480" 60 29027 848 849 912 944 480 481 512 513 0x48 0x0
[   63.699180] [drm:drm_mode_debug_printmodeline] Modeline 55:"640x480" 60 22631 640 641 704 736 480 481 512 513 0x48 0x0
[   63.699184] [drm:drm_mode_debug_printmodeline] Modeline 57:"1024x768" 60 53773 1024 1025 1088 1120 768 769 800 801 0x40 0x0
[   63.699189] [drm:drm_mode_debug_printmodeline] Modeline 56:"800x600" 60 33996 800 801 864 896 600 601 632 633 0x40 0x0
[   63.699205] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
[   63.699227] [drm:drm_mode_getconnector] [CONNECTOR:35:?]
[   63.699230] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:VGA-1]
[   63.699234] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=1
[   63.701285] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   63.701289] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[   63.704103] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   63.704107] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   63.704110] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   63.704112] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[   63.704383] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   63.704386] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[   63.704388] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[   63.704391] [drm:intel_get_load_detect_pipe] [CONNECTOR:35:VGA-1], [ENCODER:36:DAC-36]
[   63.704397] [drm:intel_get_load_detect_pipe] reusing fbdev for load-detection framebuffer
[   63.704402] [drm:intel_get_load_detect_pipe] failed to set mode on load-detect pipe
[   63.708236] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   63.708240] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[   63.712100] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   63.712105] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   63.712108] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   63.712111] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[   63.712380] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   63.712383] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[   65.963544] [drm:i915_gem_open] 
[   66.264425] [drm:drm_mode_addfb2] [FB:63]
[   70.390037] [drm:i915_gem_open] 
[   70.536450] [drm:drm_mode_addfb2] [FB:65]
[   70.878278] [drm:i915_gem_open] 
[   71.913918] [drm:i915_gem_open] 
[   72.960034] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=0
[   72.964245] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   72.964248] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[   72.972024] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   72.972029] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   72.972032] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   72.972035] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[   72.972305] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   72.972307] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[   72.972310] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[   72.972314] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=0
[   73.256147] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
[   73.256523] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
[   73.256551] [drm:drm_mode_getconnector] [CONNECTOR:35:?]
[   76.488881] [drm:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[   76.488889] [drm:intel_calculate_wm] FIFO entries required for mode: 22
[   76.488891] [drm:intel_calculate_wm] FIFO watermark level: 4
[   76.488894] [drm:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[   76.488897] [drm:i9xx_update_wm] FIFO watermarks - A: 8, B: 29
[   76.488901] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
[   76.488903] [drm:i9xx_update_wm] self-refresh entries: 80
[   76.488906] [drm:i9xx_update_wm] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 15
[   76.488909] [drm:intel_set_memory_cxsr] memory self-refresh is enabled
[   76.864414] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
[   76.864651] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
[   76.864677] [drm:drm_mode_getconnector] [CONNECTOR:35:?]
[   77.388067] [drm:i915_gem_open] 
[   77.425003] [drm:drm_mode_addfb2] [FB:67]
[   78.013273] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
[   78.013516] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
[   78.013542] [drm:drm_mode_getconnector] [CONNECTOR:35:?]
[   82.976035] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=0
[   82.980385] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   82.980389] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[   82.986075] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   82.986080] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   82.986083] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   82.986086] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[   82.986356] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   82.986359] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[   82.986361] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[   82.986365] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=0
[   84.080468] [drm:i915_gem_open] 
[   84.122257] [drm:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[   84.122265] [drm:intel_calculate_wm] FIFO entries required for mode: 22
[   84.122268] [drm:intel_calculate_wm] FIFO watermark level: 4
[   84.122271] [drm:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[   84.122274] [drm:i9xx_update_wm] FIFO watermarks - A: 8, B: 29
[   84.122277] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
[   84.122280] [drm:i9xx_update_wm] self-refresh entries: 80
[   84.122283] [drm:i9xx_update_wm] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 15
[   84.122286] [drm:intel_set_memory_cxsr] memory self-refresh is enabled
[   84.122402] [drm:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[   84.122405] [drm:intel_calculate_wm] FIFO entries required for mode: 22
[   84.122407] [drm:intel_calculate_wm] FIFO watermark level: 4
[   84.122410] [drm:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[   84.122412] [drm:i9xx_update_wm] FIFO watermarks - A: 8, B: 29
[   84.122415] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
[   84.122417] [drm:i9xx_update_wm] self-refresh entries: 80
[   84.122420] [drm:i9xx_update_wm] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 15
[   84.122423] [drm:intel_set_memory_cxsr] memory self-refresh is enabled
[   84.653808] [drm:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[   84.653816] [drm:intel_calculate_wm] FIFO entries required for mode: 22
[   84.653818] [drm:intel_calculate_wm] FIFO watermark level: 4
[   84.653821] [drm:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[   84.653824] [drm:i9xx_update_wm] FIFO watermarks - A: 8, B: 29
[   84.653827] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
[   84.653830] [drm:i9xx_update_wm] self-refresh entries: 80
[   84.653833] [drm:i9xx_update_wm] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 15
[   84.653836] [drm:intel_set_memory_cxsr] memory self-refresh is enabled
[   89.184844] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
[   89.184853] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:LVDS-1]
[   89.184857] [drm:intel_lvds_detect] [CONNECTOR:29:LVDS-1]
[   89.184883] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:LVDS-1] probed modes :
[   89.184888] [drm:drm_mode_debug_printmodeline] Modeline 32:"1280x800" 60 68940 1280 1296 1344 1408 800 801 804 816 0x48 0xa
[   89.184896] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
[   89.185142] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
[   89.185147] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:SVIDEO-1]
[   89.185150] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=1
[   89.185155] [drm:intel_get_load_detect_pipe] [CONNECTOR:37:SVIDEO-1], [ENCODER:38:TV-38]
[   89.185165] [drm:intel_get_load_detect_pipe] creating tmp fb for load-detection
[   89.185187] [drm:intel_get_load_detect_pipe] failed to set mode on load-detect pipe
[   89.185204] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:SVIDEO-1] probed modes :
[   89.185208] [drm:drm_mode_debug_printmodeline] Modeline 58:"848x480" 60 29027 848 849 912 944 480 481 512 513 0x48 0x0
[   89.185213] [drm:drm_mode_debug_printmodeline] Modeline 55:"640x480" 60 22631 640 641 704 736 480 481 512 513 0x48 0x0
[   89.185218] [drm:drm_mode_debug_printmodeline] Modeline 57:"1024x768" 60 53773 1024 1025 1088 1120 768 769 800 801 0x40 0x0
[   89.185222] [drm:drm_mode_debug_printmodeline] Modeline 56:"800x600" 60 33996 800 801 864 896 600 601 632 633 0x40 0x0
[   89.185235] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
[   89.185263] [drm:drm_mode_getconnector] [CONNECTOR:35:?]
[   89.185266] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:35:VGA-1]
[   89.185270] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=1
[   89.189420] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   89.189424] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[   89.192245] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   89.192251] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   89.192254] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   89.192257] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[   89.192528] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   89.192531] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[   89.192534] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[   89.192538] [drm:intel_get_load_detect_pipe] [CONNECTOR:35:VGA-1], [ENCODER:36:DAC-36]
[   89.192548] [drm:intel_get_load_detect_pipe] reusing fbdev for load-detection framebuffer
[   89.192557] [drm:intel_get_load_detect_pipe] failed to set mode on load-detect pipe
[   89.196603] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   89.196606] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[   89.200191] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   89.200196] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   89.200199] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   89.200202] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[   89.200471] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   89.200473] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[   92.992035] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=0
[   92.996381] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   92.996385] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[   93.004031] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[   93.004037] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   93.004040] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[   93.004043] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[   93.004314] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[   93.004316] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[   93.004319] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[   93.004323] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=0
[  101.388720] [drm:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[  101.388727] [drm:intel_calculate_wm] FIFO entries required for mode: 22
[  101.388730] [drm:intel_calculate_wm] FIFO watermark level: 4
[  101.388733] [drm:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[  101.388735] [drm:i9xx_update_wm] FIFO watermarks - A: 8, B: 29
[  101.388739] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
[  101.388741] [drm:i9xx_update_wm] self-refresh entries: 80
[  101.388744] [drm:i9xx_update_wm] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 15
[  101.388747] [drm:intel_set_memory_cxsr] memory self-refresh is enabled
[  101.461642] [drm:drm_mode_addfb2] [FB:69]
[  103.008057] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=0
[  103.012433] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[  103.012440] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[  103.016064] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[  103.016073] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[  103.016079] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[  103.016086] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[  103.016366] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[  103.016372] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[  103.016378] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[  103.016386] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=0
[  113.024059] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=0
[  113.028531] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[  113.028538] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[  113.032374] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[  113.032384] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[  113.032390] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[  113.032396] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[  113.032677] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[  113.032683] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[  113.032688] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[  113.032696] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=0
[  123.040034] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=0
[  123.044707] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[  123.044711] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[  123.048232] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[  123.048238] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[  123.048242] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[  123.048245] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[  123.048516] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[  123.048519] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[  123.048521] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[  123.048526] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=0
[  129.074283] [drm:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[  129.074291] [drm:intel_calculate_wm] FIFO entries required for mode: 22
[  129.074293] [drm:intel_calculate_wm] FIFO watermark level: 4
[  129.074296] [drm:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[  129.074299] [drm:i9xx_update_wm] FIFO watermarks - A: 8, B: 29
[  129.074302] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
[  129.074305] [drm:i9xx_update_wm] self-refresh entries: 80
[  129.074308] [drm:i9xx_update_wm] Setting FIFO watermarks - A: 8, B: 29, C: 2, SR 15
[  129.074311] [drm:intel_set_memory_cxsr] memory self-refresh is enabled
[  133.056051] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=0
[  133.060507] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[  133.060515] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[  133.064365] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[  133.064373] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[  133.064380] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[  133.064386] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[  133.064667] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[  133.064673] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[  133.064678] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[  133.064686] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=0
[  143.072031] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=0
[  143.076374] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[  143.076378] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[  143.080393] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[  143.080400] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[  143.080404] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[  143.080407] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[  143.080679] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[  143.080682] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[  143.080684] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[  143.080689] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=0
[  153.088053] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=0
[  153.092501] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[  153.092509] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[  153.096062] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[  153.096070] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[  153.096076] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[  153.096082] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[  153.096363] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[  153.096368] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[  153.096374] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[  153.096381] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=0
[  163.104056] [drm:intel_crt_detect] [CONNECTOR:35:VGA-1] force=0
[  163.108524] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[  163.108531] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
[  163.112382] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[  163.112392] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[  163.112398] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[  163.112404] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[  163.112685] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[  163.112691] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[  163.112696] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[  163.112704] [drm:intel_tv_detect] [CONNECTOR:37:SVIDEO-1] force=0

bugra9 · 18 Kasım 2016 - 00:02:52

Komutların çıktılarını kod etiketi içerisine alırsan daha rahat okunur.
kodetiketi

akaplan · 18 Kasım 2016 - 23:10:42

Alıntı yapılan: bugra9 - 18 Kasım 2016 - 00:02:52
Komutların çıktılarını kod etiketi içerisine alırsan daha rahat okunur.
http://kb.ubuntu-tr.net/kodetiketi

Uyarı ve bilgi için teşekkürler.

ince eleyen · 23 Kasım 2016 - 19:55:31

012rev3 teşekkürler. sanırım benim anakart arızalı. Aynı sıkıntı bende de vardı.Yazdıklarını okuyunca aklıma geldi.
İki defa yüksek gerilimden dolayı güç kutusu yanmıştı. Demekki anakarta da zarar vermiş.
Bilgisayarcı bir arkadaşa danıştım. Önce ramları kontrol et yine aynı arızayı veriyorsa kart arızalıdır dedi.
Artık yeni bir anakart alacağız.

if · 27 Kasım 2016 - 14:53:40

@arkaplan,

Kod Seç


lsb_release -a
uname -a
lspci

çıktılarına bakayım. 4.6 serisi ve üstü bir çekirdek kullanmanız gerekebilir.

https://bugzilla.kernel.org/show_bug.cgi?id=82481

akaplan · 29 Kasım 2016 - 21:25:16

Alıntı yapılan: if - 27 Kasım 2016 - 14:53:40
@arkaplan,

Kod Seç Genişlet
lsb_release -a uname -a lspci

çıktılarına bakayım. 4.6 serisi ve üstü bir çekirdek kullanmanız gerekebilir.

https://bugzilla.kernel.org/show_bug.cgi?id=82481

Kod Seç


lsb_release -a
No LSB modules are available.
Distributor ID:	Ubuntu
Description:	Ubuntu 16.04.1 LTS
Release:	16.04
Codename:	xenial

uname -a
Linux OKFA 4.4.0-45-generic #66-Ubuntu SMP Wed Oct 19 14:12:05 UTC 2016 i686 i686 i686 GNU/Linux

~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
03:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
03:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)

Gecikme için kusura bakmayın.

if · 30 Kasım 2016 - 09:28:48

@akaplan,

Estağfirullah, ne kusuru.

Kod Seç


cd ~/İndirilenler
mkdir çekirdek
cd çekirdek
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.8.11/linux-headers-4.8.11-040811-generic_4.8.11-040811.201611260431_amd64.deb
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.8.11/linux-headers-4.8.11-040811_4.8.11-040811.201611260431_all.deb
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.8.11/linux-image-4.8.11-040811-generic_4.8.11-040811.201611260431_amd64.deb
sudo dpkg -i *.deb

komutlarının ardından sistemi yeniden başlatıp sorunun tekrar edip etmediğini gözlemleyin.

akaplan · 01 Aralık 2016 - 13:54:11

Alıntı yapılan: if - 30 Kasım 2016 - 09:28:48
@akaplan,

Estağfirullah, ne kusuru.

Kod Seç Genişlet
cd ~/İndirilenler mkdir çekirdek cd çekirdek wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.8.11/linux-headers-4.8.11-040811-generic_4.8.11-040811.201611260431_amd64.deb wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.8.11/linux-headers-4.8.11-040811_4.8.11-040811.201611260431_all.deb wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.8.11/linux-image-4.8.11-040811-generic_4.8.11-040811.201611260431_amd64.deb sudo dpkg -i *.deb

komutlarının ardından sistemi yeniden başlatıp sorunun tekrar edip etmediğini gözlemleyin.

Üstadım yukarıda komutları sırasıyla sorunsuzca uyguladım. Dünden beri kapanma sorunu tekrarlamadı. Sanırım işe yaradı. Bir süre daha gözlemledikten sonra kesin neticeyi bildireceğim . Teşekkürler.

Ubuntu Türkiye

Haberler:

Dizüstü bilgisayar kapanıyor. Yazılım mı donanım kaynaklı?

akaplan

012rev3

akaplan

ince eleyen

akaplan

012rev3

LinuxHacisi

akaplan

bugra9

akaplan

ince eleyen

if

akaplan

if

akaplan