İnternet hızım çok yavaş

[earcome]

wirless adaptör kullanıyorum modeli tp-link wn822n v3 ne yaptıysam hızını düzeltemedim aşırı yavaş bazı forumlarda driverı buglı olduğu söyleniyor nasıl düzeltebilirim yardımınızı bekliyorum 

cat /etc/lsb-release

Kod Seç Genişlet

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04 LTS"

uname -a

Kod Seç Genişlet

Linux erkam-GA-MA790X-UD3P 4.4.0-31-generic #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux


lspci

Kod Seç Genişlet

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD780 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RX780/RD790 PCI to PCI bridge (external gfx0 port A)
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD790 PCI to PCI bridge (PCI express gpp port A)
00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD790 PCI to PCI bridge (PCI express gpp port F)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3a)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV770 [Radeon HD 4850]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV770 HDMI Audio [Radeon HD 4850/4870]
02:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
02:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
04:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)


lsusb

Kod Seç Genişlet

Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

rfkill list

Kod Seç Genişlet

1: phy1: Wireless LAN
Soft blocked: no
Hard blocked: no


sudo lshw -C network

Kod Seç Genişlet

*-network               
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: enp3s0
       version: 02
       serial: 00:24:1d:71:aa:b1
       size: 10Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       resources: irq:27 ioport:ce00(size=256) memory:fdfff000-fdffffff memory:fdfe0000-fdfeffff memory:fd900000-fd90ffff
  *-network
       description: Wireless interface
       physical id: 1
       bus info: usb@2:4
       logical name: wlxf4f26d155816
       serial: f4:f2:6d:15:58:16
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rtl8192cu driverversion=4.4.0-31-generic firmware=N/A ip=10.1.1.12 link=yes multicast=yes wireless=IEEE 802.11bgn


ifconfig

Kod Seç Genişlet

enp3s0    Link encap:Ethernet  HWaddr 00:24:1d:71:aa:b1 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:2573 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2573 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:214809 (214.8 KB)  TX bytes:214809 (214.8 KB)

wlxf4f26d155816 Link encap:Ethernet  HWaddr f4:f2:6d:15:58:16 
          inet addr:10.1.1.12  Bcast:10.1.1.255  Mask:255.255.255.0
          inet6 addr: fe80::f6f2:6dff:fe15:5816/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:381 errors:0 dropped:0 overruns:0 frame:0
          TX packets:249 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:93203 (93.2 KB)  TX bytes:77830 (77.8 KB)


iwconfig

Kod Seç Genişlet

lo        no wireless extensions.

wlxf4f26d155816  IEEE 802.11bgn  ESSID:"Cirpici1" 
          Mode:Managed  Frequency:2.462 GHz  Access Point: 14:DD:A9:4B:A3:30   
          Bit Rate=72.2 Mb/s   Tx-Power=20 dBm   
          Retry short limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:off
          Link Quality=60/70  Signal level=-50 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:10   Missed beacon:0

enp3s0    no wireless extensions.


iwlist scanning

Kod Seç Genişlet

lo        Interface doesn't support scanning.

wlxf4f26d155816  Scan completed :
          Cell 01 - Address: 14:DD:A9:4B:A3:30
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=62/70  Signal level=-48 dBm 
                    Encryption key:on
                    ESSID:"Cirpici1"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
                              18 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=00000008ea608fd8
                    Extra: Last beacon: 59400ms ago
                    IE: Unknown: 00084369727069636931
                    IE: Unknown: 010882848B961224486C
                    IE: Unknown: 03010B
                    IE: Unknown: 2A0100
                    IE: Unknown: 32040C183060
                    IE: Unknown: 2D1AEC1117FFFF000001000000000000000000000000000000000000
                    IE: Unknown: 3D160B000600000000000000000000000000000000000000
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 7F080000000100000000
                    IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
                    IE: Unknown: 4A0E14000A002C01C800140005001900
                    IE: Unknown: 7F080000000100000000
                    IE: Unknown: 0706444520010D10
                    IE: Unknown: DD9A0050F204104A0001101044000102103B00010310470010BC329E001DD811B2860114DDA94BA330102100154153555354654B20436F6D707574657220496E632E1023000A57505320526F757465721024000844534C2D4E3137551042000830303030303030301054000800060050F20400011011000F415355532057505320526F7574657210080002210C103C0001011049000600372A000120
                    IE: Unknown: DD07000C4303000000

enp3s0    Interface doesn't support scanning.


lsmod

Kod Seç Genişlet

Module                  Size  Used by
drbg                   32768  1
ansi_cprng             16384  0
ctr                    16384  2
ccm                    20480  2
rtl8xxxu               73728  0
arc4                   16384  2
rtl8192cu              69632  0
rtl_usb                20480  1 rtl8192cu
rtl8192c_common        53248  1 rtl8192cu
rtlwifi                77824  3 rtl_usb,rtl8192c_common,rtl8192cu
mac80211              737280  4 rtl8xxxu,rtl_usb,rtlwifi,rtl8192cu
cfg80211              565248  2 mac80211,rtlwifi
snd_hda_codec_hdmi     53248  1
kvm_amd                65536  0
snd_hda_codec_realtek    86016  1
snd_hda_codec_generic    77824  1 snd_hda_codec_realtek
kvm                   536576  1 kvm_amd
snd_hda_intel          36864  5
irqbypass              16384  1 kvm
snd_hda_codec         135168  4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hda_core           73728  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
snd_hwdep              16384  1 snd_hda_codec
joydev                 20480  0
input_leds             16384  0
snd_pcm               106496  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
serio_raw              16384  0
snd_rawmidi            32768  1 snd_seq_midi
k10temp                16384  0
edac_mce_amd           24576  0
edac_core              53248  0
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              32768  2 snd_pcm,snd_seq
i2c_piix4              24576  0
snd                    81920  21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
soundcore              16384  1 snd
shpchp                 36864  0
8250_fintek            16384  0
mac_hid                16384  0
parport_pc             32768  0
ppdev                  20480  0
lp                     20480  0
parport                49152  3 lp,ppdev,parport_pc
autofs4                40960  2
pata_acpi              16384  0
hid_generic            16384  0
usbhid                 49152  0
hid                   118784  3 hid_generic,usbhid
amdkfd                131072  1
amd_iommu_v2           20480  1 amdkfd
radeon               1515520  4
i2c_algo_bit           16384  1 radeon
ttm                    94208  1 radeon
firewire_ohci          40960  0
firewire_core          65536  1 firewire_ohci
drm_kms_helper        147456  1 radeon
crc_itu_t              16384  1 firewire_core
pata_atiixp            16384  0
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
r8169                  81920  0
fb_sys_fops            16384  1 drm_kms_helper
mii                    16384  1 r8169
drm                   360448  7 ttm,drm_kms_helper,radeon
ahci                   36864  4
libahci                32768  1 ahci
pata_jmicron           16384  0
wmi                    20480  0
floppy                 73728  0
fjes                   28672  0


dmesg

Kod Seç Genişlet

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-31-generic (buildd@lgw01-16) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1) ) #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016 (Ubuntu 4.4.0-31.50-generic 4.4.13)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-31-generic root=UUID=32d02f85-3e44-4afb-990e-530e71b3f9f1 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] tseg: 00cff00000
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA790X-UD3P/GA-MA790X-UD3P, BIOS F1 04/28/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 base 0000CFF00000 mask FFFFFFF00000 uncachable
[    0.000000]   4 base 000100000000 mask FFFFE0000000 write-back
[    0.000000]   5 base 000120000000 mask FFFFF0000000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000130000000 aka 4864M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3327MB, range: 1MB, type UC
[    0.000000] reg 4, base: 4GB, range: 512MB, type WB
[    0.000000] reg 5, base: 4608MB, range: 256MB, type WB
[    0.000000] total RAM covered: 3327M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 2M num_reg: 4  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3327MB, range: 1MB, type UC
[    0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f55a0-0x000f55af] mapped at [ffff8800000f55a0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x02200000, 0x02200fff] PGTABLE
[    0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[    0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33b00000-0x35d77fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6FB0 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 0x00000000CFEE3000 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 0x00000000CFEE3040 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 0x00000000CFEE30C0 006F3A (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 0x00000000CFEE0000 000040
[    0.000000] ACPI: HPET 0x00000000CFEEA0C0 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 0x00000000CFEEA100 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: TAMG 0x00000000CFEEA140 00030A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
[    0.000000] ACPI: APIC 0x00000000CFEEA000 000084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x12fff9000-0x12fffdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000012fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cfedffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000012fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff]
[    0.000000] On node 0 totalpages: 1048190
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13244 pages used for memmap
[    0.000000]   DMA32 zone: 847584 pages, LIFO batch:31
[    0.000000]   Normal zone: 3072 pages used for memmap
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 1 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfee0000-0xcfee2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfee3000-0xcfeeffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfef0000-0xcfefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88012fc00000 s98008 r8192 d28968 u524288
[    0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031789
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-31-generic root=UUID=32d02f85-3e44-4afb-990e-530e71b3f9f1 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xc4000000-0xc5ffffff] (32MB)
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[    0.000000] Memory: 3940996K/4192760K available (8393K kernel code, 1282K rwdata, 3940K rodata, 1480K init, 1292K bss, 251764K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] Build-time adjustment of leaf fanout to 64.
[    0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:16640 nr_irqs:456 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3013.680 MHz processor
[    0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.36 BogoMIPS (lpj=12054720)
[    0.000027] pid_max: default: 32768 minimum: 301
[    0.000032] ACPI: Core revision 20150930
[    0.002582] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.002603] Security Framework initialized
[    0.002605] Yama: becoming mindful.
[    0.002620] AppArmor: AppArmor initialized
[    0.002848] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.004112] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.004687] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.004691] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.004907] Initializing cgroup subsys io
[    0.004911] Initializing cgroup subsys memory
[    0.004918] Initializing cgroup subsys devices
[    0.004920] Initializing cgroup subsys freezer
[    0.004923] Initializing cgroup subsys net_cls
[    0.004925] Initializing cgroup subsys perf_event
[    0.004927] Initializing cgroup subsys net_prio
[    0.004930] Initializing cgroup subsys hugetlb
[    0.004933] Initializing cgroup subsys pids
[    0.004951] CPU: Physical Processor ID: 0
[    0.004952] CPU: Processor Core ID: 0
[    0.004953] mce: CPU supports 6 MCE banks
[    0.004959] LVT offset 0 assigned for vector 0xf9
[    0.004963] process: using AMD E400 aware idle routine
[    0.004965] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.004966] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[    0.005194] Freeing SMP alternatives memory: 28K (ffffffff820b4000 - ffffffff820bb000)
[    0.037629] ftrace: allocating 31994 entries in 125 pages
[    0.049831] smpboot: Max logical packages: 2
[    0.049833] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.050349] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.195169] smpboot: CPU0: AMD Phenom(tm) II X3 720 Processor (family: 0x10, model: 0x4, stepping: 0x2)
[    0.195183] Performance Events: AMD PMU driver.
[    0.195187] ... version:                0
[    0.195188] ... bit width:              48
[    0.195189] ... generic registers:      4
[    0.195190] ... value mask:             0000ffffffffffff
[    0.195191] ... max period:             00007fffffffffff
[    0.195192] ... fixed-purpose events:   0
[    0.195192] ... event mask:             000000000000000f
[    0.195812] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.195881] x86: Booting SMP configuration:
[    0.195883] .... node  #0, CPUs:      #1 #2
[    0.201146] x86: Booted up 1 node, 3 CPUs
[    0.201148] smpboot: Total of 3 processors activated (18082.08 BogoMIPS)
[    0.204682] devtmpfs: initialized
[    0.208850] evm: security.selinux
[    0.208851] evm: security.SMACK64
[    0.208852] evm: security.SMACK64EXEC
[    0.208853] evm: security.SMACK64TRANSMUTE
[    0.208854] evm: security.SMACK64MMAP
[    0.208855] evm: security.ima
[    0.208856] evm: security.capability
[    0.208966] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
[    0.209041] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.209120] pinctrl core: initialized pinctrl subsystem
[    0.209220] RTC time: 11:09:12, date: 07/19/16
[    0.209329] NET: Registered protocol family 16
[    0.219192] cpuidle: using governor ladder
[    0.231189] cpuidle: using governor menu
[    0.231196] PCCT header not found.
[    0.231202] node 0 link 0: io port [b000, ffff]
[    0.231204] TOM: 00000000d0000000 aka 3328M
[    0.231206] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[    0.231208] node 0 link 0: mmio [a0000, bffff]
[    0.231210] node 0 link 0: mmio [d0000000, dfffffff]
[    0.231212] node 0 link 0: mmio [f0000000, fe02ffff]
[    0.231213] node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff]
[    0.231215] TOM2: 0000000130000000 aka 4864M
[    0.231217] bus: [bus 00-04] on node 0 link 0
[    0.231218] bus: 00 [io  0x0000-0xffff]
[    0.231219] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.231220] bus: 00 [mem 0xd0000000-0xdfffffff]
[    0.231221] bus: 00 [mem 0xe0500000-0xffffffff]
[    0.231222] bus: 00 [mem 0xe0100000-0xe04fffff]
[    0.231223] bus: 00 [mem 0x130000000-0xfcffffffff]
[    0.231305] ACPI: bus type PCI registered
[    0.231307] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.231385] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.231388] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.231397] PCI: Using configuration type 1 for base access
[    0.243616] ACPI: Added _OSI(Module Device)
[    0.243619] ACPI: Added _OSI(Processor Device)
[    0.243620] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.243621] ACPI: Added _OSI(Processor Aggregator Device)
[    0.249218] ACPI: Interpreter enabled
[    0.249230] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.249235] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.249246] ACPI: (supports S0 S3 S4 S5)
[    0.249248] ACPI: Using IOAPIC for interrupt routing
[    0.249311] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.252551] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.252557] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.252561] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.252748] PCI host bridge to bus 0000:00
[    0.252751] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.252753] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.252755] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.252756] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.252758] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window]
[    0.252760] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.252768] pci 0000:00:00.0: [1002:5958] type 00 class 0x060000
[    0.252782] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[    0.252858] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[    0.252888] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.252925] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.252960] pci 0000:00:04.0: [1002:597a] type 01 class 0x060400
[    0.252989] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.253023] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.253060] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
[    0.253089] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.253124] pci 0000:00:0a.0: System wakeup disabled by ACPI
[    0.253167] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[    0.253193] pci 0000:00:11.0: reg 0x10: [io  0xff00-0xff07]
[    0.253202] pci 0000:00:11.0: reg 0x14: [io  0xfe00-0xfe03]
[    0.253211] pci 0000:00:11.0: reg 0x18: [io  0xfd00-0xfd07]
[    0.253219] pci 0000:00:11.0: reg 0x1c: [io  0xfc00-0xfc03]
[    0.253228] pci 0000:00:11.0: reg 0x20: [io  0xfb00-0xfb0f]
[    0.253237] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
[    0.253257] pci 0000:00:11.0: set SATA to AHCI mode
[    0.253335] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.253350] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
[    0.253433] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.253469] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[    0.253483] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[    0.253567] pci 0000:00:12.1: System wakeup disabled by ACPI
[    0.253603] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.253627] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff]
[    0.253694] pci 0000:00:12.2: supports D1 D2
[    0.253695] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.253732] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.253770] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.253785] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[    0.253868] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.253902] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[    0.253917] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[    0.254000] pci 0000:00:13.1: System wakeup disabled by ACPI
[    0.254037] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.254061] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[    0.254128] pci 0000:00:13.2: supports D1 D2
[    0.254129] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.254166] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.254206] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.254346] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.254368] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
[    0.254377] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
[    0.254386] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
[    0.254394] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
[    0.254403] pci 0000:00:14.1: reg 0x20: [io  0xfa00-0xfa0f]
[    0.254422] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.254424] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.254425] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.254427] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.254502] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.254528] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
[    0.254584] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.254620] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.254654] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.254777] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.254843] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.254876] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.254890] pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff]
[    0.254974] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.255010] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.255071] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.255129] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.255194] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.255256] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.255354] pci 0000:01:00.0: [1002:9442] type 00 class 0x030000
[    0.255375] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.255384] pci 0000:01:00.0: reg 0x18: [mem 0xfdee0000-0xfdeeffff 64bit]
[    0.255390] pci 0000:01:00.0: reg 0x20: [io  0xee00-0xeeff]
[    0.255401] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.255422] pci 0000:01:00.0: supports D1 D2
[    0.255458] pci 0000:01:00.1: [1002:aa30] type 00 class 0x040300
[    0.255479] pci 0000:01:00.1: reg 0x10: [mem 0xfdefc000-0xfdefffff 64bit]
[    0.255523] pci 0000:01:00.1: supports D1 D2
[    0.263201] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.263206] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.263209] pci 0000:00:02.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.263212] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.263270] pci 0000:02:00.0: [197b:2363] type 00 class 0x010185
[    0.263345] pci 0000:02:00.0: reg 0x24: [mem 0xfddfe000-0xfddfffff]
[    0.263389] pci 0000:02:00.0: PME# supported from D3hot
[    0.263440] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
[    0.263461] pci 0000:02:00.1: reg 0x10: [io  0xdf00-0xdf07]
[    0.263468] pci 0000:02:00.1: reg 0x14: [io  0xde00-0xde03]
[    0.263475] pci 0000:02:00.1: reg 0x18: [io  0xdd00-0xdd07]
[    0.263483] pci 0000:02:00.1: reg 0x1c: [io  0xdc00-0xdc03]
[    0.263490] pci 0000:02:00.1: reg 0x20: [io  0xdb00-0xdb0f]
[    0.263559] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.263565] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.263568] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    0.263570] pci 0000:00:04.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.263573] pci 0000:00:04.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.263609] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.263636] pci 0000:03:00.0: reg 0x10: [io  0xce00-0xceff]
[    0.263655] pci 0000:03:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[    0.263668] pci 0000:03:00.0: reg 0x20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
[    0.263676] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.263717] pci 0000:03:00.0: supports D1 D2
[    0.263719] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.271199] pci 0000:00:0a.0: PCI bridge to [bus 03]
[    0.271204] pci 0000:00:0a.0:   bridge window [io  0xc000-0xcfff]
[    0.271206] pci 0000:00:0a.0:   bridge window [mem 0xfd900000-0xfd9fffff]
[    0.271209] pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.271276] pci 0000:04:0e.0: [104c:8024] type 00 class 0x0c0010
[    0.271306] pci 0000:04:0e.0: reg 0x10: [mem 0xfdbff000-0xfdbff7ff]
[    0.271318] pci 0000:04:0e.0: reg 0x14: [mem 0xfdbf8000-0xfdbfbfff]
[    0.271402] pci 0000:04:0e.0: supports D1 D2
[    0.271403] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
[    0.271471] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[    0.271474] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
[    0.271478] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.271482] pci 0000:00:14.4:   bridge window [mem 0xfda00000-0xfdafffff pref]
[    0.271484] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.271485] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.271487] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.271489] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.271490] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xfebfffff window] (subtractive decode)
[    0.271675] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.271714] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.271750] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.271786] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.271821] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.271855] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.271890] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.271925] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.272379] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.272381] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.272383] vgaarb: loaded
[    0.272384] vgaarb: bridge control possible 0000:01:00.0
[    0.272618] SCSI subsystem initialized
[    0.272689] libata version 3.00 loaded.
[    0.272708] ACPI: bus type USB registered
[    0.272724] usbcore: registered new interface driver usbfs
[    0.272732] usbcore: registered new interface driver hub
[    0.272749] usbcore: registered new device driver usb
[    0.272900] PCI: Using ACPI for IRQ routing
[    0.281093] PCI: pci_cache_line_size set to 64 bytes
[    0.281150] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.281152] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
[    0.281267] NetLabel: Initializing
[    0.281268] NetLabel:  domain hash size = 128
[    0.281269] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.281278] NetLabel:  unlabeled traffic allowed by default
[    0.281367] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.281370] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.283431] clocksource: Switched to clocksource hpet
[    0.289468] AppArmor: AppArmor Filesystem Enabled
[    0.289525] pnp: PnP ACPI init
[    0.289619] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.289622] system 00:00: [io  0x0220-0x0225] has been reserved
[    0.289624] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.289627] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.289818] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    0.289827] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[    0.289851] system 00:01: [io  0x4100-0x411f] has been reserved
[    0.289853] system 00:01: [io  0x0228-0x022f] has been reserved
[    0.289855] system 00:01: [io  0x040b] has been reserved
[    0.289856] system 00:01: [io  0x04d6] has been reserved
[    0.289858] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.289860] system 00:01: [io  0x0c14] has been reserved
[    0.289861] system 00:01: [io  0x0c50-0x0c52] has been reserved
[    0.289863] system 00:01: [io  0x0c6c-0x0c6d] has been reserved
[    0.289865] system 00:01: [io  0x0c6f] has been reserved
[    0.289866] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.289868] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.289870] system 00:01: [io  0x0cd4-0x0cdf] has been reserved
[    0.289872] system 00:01: [io  0x4000-0x40fe] could not be reserved
[    0.289874] system 00:01: [io  0x4210-0x4217] has been reserved
[    0.289875] system 00:01: [io  0x0b00-0x0b0f] has been reserved
[    0.289877] system 00:01: [io  0x0b10-0x0b1f] has been reserved
[    0.289879] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    0.289881] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[    0.289884] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.290003] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.290118] pnp 00:03: [dma 2]
[    0.290146] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.290309] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.290358] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.290406] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.290409] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.290516] system 00:07: [mem 0x000cf800-0x000cffff] has been reserved
[    0.290518] system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.290520] system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.290522] system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.290524] system 00:07: [mem 0xcfee0000-0xcfefffff] could not be reserved
[    0.290526] system 00:07: [mem 0xffff0000-0xffffffff] has been reserved
[    0.290527] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.290529] system 00:07: [mem 0x00100000-0xcfedffff] could not be reserved
[    0.290531] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.290533] system 00:07: [mem 0xfee00000-0xfee00fff] could not be reserved
[    0.290535] system 00:07: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.290537] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.290552] pnp: PnP ACPI: found 8 devices
[    0.297030] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.297057] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[    0.297059] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.297062] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.297064] pci 0000:00:02.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.297067] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.297070] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.297072] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    0.297074] pci 0000:00:04.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.297076] pci 0000:00:04.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.297080] pci 0000:03:00.0: BAR 6: assigned [mem 0xfd900000-0xfd90ffff pref]
[    0.297082] pci 0000:00:0a.0: PCI bridge to [bus 03]
[    0.297083] pci 0000:00:0a.0:   bridge window [io  0xc000-0xcfff]
[    0.297086] pci 0000:00:0a.0:   bridge window [mem 0xfd900000-0xfd9fffff]
[    0.297088] pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.297092] pci 0000:00:14.4: PCI bridge to [bus 04]
[    0.297094] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
[    0.297099] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.297102] pci 0000:00:14.4:   bridge window [mem 0xfda00000-0xfdafffff pref]
[    0.297109] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.297111] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.297112] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.297114] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.297116] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff window]
[    0.297117] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.297119] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.297121] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.297123] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.297124] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[    0.297126] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.297127] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.297129] pci_bus 0000:03: resource 1 [mem 0xfd900000-0xfd9fffff]
[    0.297131] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.297132] pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
[    0.297134] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
[    0.297136] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
[    0.297137] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.297139] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.297141] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.297142] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.297144] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xfebfffff window]
[    0.297175] NET: Registered protocol family 2
[    0.297335] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.297430] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.297577] TCP: Hash tables configured (established 32768 bind 32768)
[    0.297620] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.297647] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.297706] NET: Registered protocol family 1
[    0.719617] pci 0000:01:00.0: Video device with shadowed ROM
[    0.719625] pci 0000:02:00.0: async suspend disabled to avoid multi-function power-on ordering issue
[    0.719628] pci 0000:02:00.1: async suspend disabled to avoid multi-function power-on ordering issue
[    0.719636] PCI: CLS 4 bytes, default 64
[    0.719698] Trying to unpack rootfs image as initramfs...
[    1.222364] Freeing initrd memory: 35296K (ffff880033b00000 - ffff880035d78000)
[    1.222634] PCI-DMA: Disabling AGP.
[    1.222712] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    1.222713] PCI-DMA: using GART IOMMU.
[    1.222716] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.225731] LVT offset 1 assigned for vector 0x400
[    1.225741] IBS: LVT offset 1 assigned
[    1.225775] perf: AMD IBS detected (0x0000001f)
[    1.225862] Scanning for low memory corruption every 60 seconds
[    1.226161] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.226189] audit: initializing netlink subsys (disabled)
[    1.226213] audit: type=2000 audit(1468926553.092:1): initialized
[    1.226495] Initialise system trusted keyring
[    1.226652] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    1.226653] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.228050] zbud: loaded
[    1.228303] VFS: Disk quotas dquot_6.6.0
[    1.228333] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.228567] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.228855] fuse init (API version 7.23)
[    1.228975] Key type big_key registered
[    1.228996] Allocating IMA MOK and blacklist keyrings.
[    1.229419] Key type asymmetric registered
[    1.229422] Asymmetric key parser 'x509' registered
[    1.229453] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.229487] io scheduler noop registered
[    1.229489] io scheduler deadline registered (default)
[    1.229515] io scheduler cfq registered
[    1.229998] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.230004] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.230030] vesafb: mode is 1152x864x32, linelength=4608, pages=0
[    1.230031] vesafb: scrolling: redraw
[    1.230033] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.230047] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000800000, using 3904k, total 3904k
[    1.230161] Console: switching to colour frame buffer device 144x54
[    1.230177] fb0: VESA VGA frame buffer device
[    1.230248] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.230252] ACPI: Power Button [PWRB]
[    1.230290] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.230292] ACPI: Power Button [PWRF]
[    1.230475] GHES: HEST is not enabled!
[    1.230551] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.251009] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.252550] Linux agpgart interface v0.103
[    1.254920] brd: module loaded
[    1.255959] loop: module loaded
[    1.256177] libphy: Fixed MDIO Bus: probed
[    1.256180] tun: Universal TUN/TAP device driver, 1.6
[    1.256181] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.256211] PPP generic driver version 2.4.2
[    1.256260] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.256264] ehci-pci: EHCI PCI platform driver
[    1.256384] QUIRK: Enable AMD PLL fix
[    1.256405] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.256414] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.256418] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.256420] ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[    1.256431] ehci-pci 0000:00:12.2: debug port 1
[    1.256475] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
[    1.267507] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.267559] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.267562] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.267563] usb usb1: Product: EHCI Host Controller
[    1.267565] usb usb1: Manufacturer: Linux 4.4.0-31-generic ehci_hcd
[    1.267566] usb usb1: SerialNumber: 0000:00:12.2
[    1.267695] hub 1-0:1.0: USB hub found
[    1.267704] hub 1-0:1.0: 6 ports detected
[    1.267964] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.267970] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.267973] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.267975] ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[    1.267987] ehci-pci 0000:00:13.2: debug port 1
[    1.268031] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
[    1.279501] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.279567] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.279569] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.279570] usb usb2: Product: EHCI Host Controller
[    1.279572] usb usb2: Manufacturer: Linux 4.4.0-31-generic ehci_hcd
[    1.279573] usb usb2: SerialNumber: 0000:00:13.2
[    1.279698] hub 2-0:1.0: USB hub found
[    1.279704] hub 2-0:1.0: 6 ports detected
[    1.279841] ehci-platform: EHCI generic platform driver
[    1.279852] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.279856] ohci-pci: OHCI PCI platform driver
[    1.279982] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.279987] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.280019] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
[    1.339516] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.339520] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.339522] usb usb3: Product: OHCI PCI host controller
[    1.339523] usb usb3: Manufacturer: Linux 4.4.0-31-generic ohci_hcd
[    1.339525] usb usb3: SerialNumber: 0000:00:12.0
[    1.339660] hub 3-0:1.0: USB hub found
[    1.339669] hub 3-0:1.0: 3 ports detected
[    1.339880] ohci-pci 0000:00:12.1: OHCI PCI host controller
[    1.339885] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[    1.339906] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
[    1.399513] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.399517] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.399518] usb usb4: Product: OHCI PCI host controller
[    1.399520] usb usb4: Manufacturer: Linux 4.4.0-31-generic ohci_hcd
[    1.399521] usb usb4: SerialNumber: 0000:00:12.1
[    1.399661] hub 4-0:1.0: USB hub found
[    1.399669] hub 4-0:1.0: 3 ports detected
[    1.399880] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.399886] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.399921] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
[    1.459514] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.459518] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.459520] usb usb5: Product: OHCI PCI host controller
[    1.459521] usb usb5: Manufacturer: Linux 4.4.0-31-generic ohci_hcd
[    1.459522] usb usb5: SerialNumber: 0000:00:13.0
[    1.459659] hub 5-0:1.0: USB hub found
[    1.459668] hub 5-0:1.0: 3 ports detected
[    1.459880] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    1.459885] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[    1.459906] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
[    1.519515] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.519518] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.519520] usb usb6: Product: OHCI PCI host controller
[    1.519522] usb usb6: Manufacturer: Linux 4.4.0-31-generic ohci_hcd
[    1.519523] usb usb6: SerialNumber: 0000:00:13.1
[    1.519659] hub 6-0:1.0: USB hub found
[    1.519666] hub 6-0:1.0: 3 ports detected
[    1.519876] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.519881] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[    1.519902] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
[    1.579514] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.579518] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.579519] usb usb7: Product: OHCI PCI host controller
[    1.579521] usb usb7: Manufacturer: Linux 4.4.0-31-generic ohci_hcd
[    1.579522] usb usb7: SerialNumber: 0000:00:14.5
[    1.579657] hub 7-0:1.0: USB hub found
[    1.579666] hub 7-0:1.0: 2 ports detected
[    1.579760] ohci-platform: OHCI generic platform driver
[    1.579770] uhci_hcd: USB Universal Host Controller Interface driver
[    1.579833] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.579834] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.579978] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.580086] mousedev: PS/2 mouse device common for all mice
[    1.580207] rtc_cmos 00:02: RTC can wake from S4
[    1.580311] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.580344] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.580350] i2c /dev entries driver
[    1.580396] device-mapper: uevent: version 1.0.3
[    1.580452] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.580467] ledtrig-cpu: registered to indicate activity on CPUs
[    1.580799] NET: Registered protocol family 10
[    1.580974] NET: Registered protocol family 17
[    1.580984] Key type dns_resolver registered
[    1.581192] microcode: CPU0: patch_level=0x01000086
[    1.581201] microcode: CPU1: patch_level=0x01000086
[    1.581207] microcode: CPU2: patch_level=0x01000086
[    1.581238] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.581375] registered taskstats version 1
[    1.581392] Loading compiled-in X.509 certificates
[    1.582344] Loaded X.509 cert 'Build time autogenerated kernel key: cfb4d0870811f0d88a3f3259915bd8e83759f99c'
[    1.582362] zswap: loaded using pool lzo/zbud
[    1.584360] Key type trusted registered
[    1.587839] Key type encrypted registered
[    1.587849] AppArmor: AppArmor sha1 policy hashing enabled
[    1.587854] ima: No TPM chip found, activating TPM-bypass!
[    1.587880] evm: HMAC attrs: 0x1
[    1.588145]   Magic number: 8:216:176
[    1.588183] acpi device:0c: hash matches
[    1.588228] rtc_cmos 00:02: setting system clock to 2016-07-19 11:09:13 UTC (1468926553)
[    1.588318] powernow_k8: This CPU is not supported anymore, using acpi-cpufreq instead.
[    1.589176] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.589178] EDD information not available.
[    1.589228] PM: Hibernation image not present or could not be loaded.
[    1.590610] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[    1.590612] Write protecting the kernel read-only data: 14336k
[    1.591356] Freeing unused kernel memory: 1836K (ffff880001835000 - ffff880001a00000)
[    1.591783] Freeing unused kernel memory: 156K (ffff880001dd9000 - ffff880001e00000)
[    1.601876] random: systemd-udevd urandom read with 3 bits of entropy available
[    1.602530] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.627639] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.631792] Floppy drive(s): fd0 is 1.44M
[    1.633595] wmi: Mapper loaded
[    1.635102] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[    1.637134] ahci 0000:00:11.0: version 3.0
[    1.637350] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.637354] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[    1.637869] scsi host0: pata_jmicron
[    1.639813] [drm] Initialized drm 1.1.0 20060810
[    1.641336] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.641345] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.641667] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc90000740000, 00:24:1d:71:aa:b1, XID 1c4000c0 IRQ 27
[    1.641670] r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    1.641784] scsi host2: pata_jmicron
[    1.641826] ata1: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 17
[    1.641828] ata2: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 17
[    1.647667] scsi host1: ahci
[    1.651399] FDC 0 is a post-1991 82077
[    1.651508] scsi host3: ahci
[    1.651714] scsi host4: ahci
[    1.651822] scsi host5: ahci
[    1.651863] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[    1.651866] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[    1.651869] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[    1.651871] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[    1.652751] scsi host6: pata_atiixp
[    1.652965] scsi host7: pata_atiixp
[    1.653003] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[    1.653005] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[    1.671555] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.671560] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    1.671893] scsi host8: ahci
[    1.671972] scsi host9: ahci
[    1.672021] ata9: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16
[    1.672024] ata10: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 16
[    1.672665] [drm] radeon kernel modesetting enabled.
[    1.674709] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.674712] AMD IOMMUv2 functionality not available on this system
[    1.677531] CRAT table not found
[    1.677533] Finished initializing topology ret=0
[    1.677576] kfd kfd: Initialized module
[    1.677777] checking generic (d0000000 3d0000) vs hw (d0000000 10000000)
[    1.677778] fb: switching to radeondrmfb from VESA VGA
[    1.677808] Console: switching to colour dummy device 80x25
[    1.678066] [drm] initializing kernel modesetting (RV770 0x1002:0x9442 0x1787:0x2003).
[    1.678076] [drm] register mmio base: 0xFDEE0000
[    1.678077] [drm] register mmio size: 65536
[    1.678384] ATOM BIOS: RV770PRO
[    1.678407] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    1.678409] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    1.678410] [drm] Detected VRAM RAM=1024M, BAR=256M
[    1.678411] [drm] RAM width 256bits DDR
[    1.678455] [TTM] Zone  kernel: Available graphics memory: 2022872 kiB
[    1.678456] [TTM] Initializing pool allocator
[    1.678460] [TTM] Initializing DMA pool allocator
[    1.678476] [drm] radeon: 1024M of VRAM memory ready
[    1.678477] [drm] radeon: 1024M of GTT memory ready.
[    1.678489] [drm] Loading RV770 Microcode
[    1.678546] [drm] Internal thermal controller with fan control
[    1.678585] [drm] radeon: power management initialized
[    1.678643] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.679868] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    1.683608] [drm] PCIE GART of 1024M enabled (table at 0x0000000000258000).
[    1.683634] radeon 0000:01:00.0: WB enabled
[    1.683637] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800cee96c00
[    1.683639] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800cee96c0c
[    1.684007] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000056230 and cpu addr 0xffffc90001016230
[    1.684009] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.684010] [drm] Driver supports precise vblank timestamp query.
[    1.684011] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    1.684042] radeon 0000:01:00.0: radeon: using MSI.
[    1.684064] [drm] radeon: irq initialized.
[    1.696830] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    1.703540] firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    1.729908] [drm] ring test on 0 succeeded in 1 usecs
[    1.729915] [drm] ring test on 3 succeeded in 2 usecs
[    1.799559] usb 5-3: new full-speed USB device number 2 using ohci-pci
[    1.853443] usb 2-4: new high-speed USB device number 3 using ehci-pci
[    1.904595] [drm] ring test on 5 succeeded in 1 usecs
[    1.904600] [drm] UVD initialized successfully.
[    1.904716] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.904732] [drm] ib test on ring 3 succeeded in 0 usecs
[    1.971511] ata6: SATA link down (SStatus 0 SControl 300)
[    1.971546] ata4: SATA link down (SStatus 0 SControl 300)
[    1.971575] ata5: SATA link down (SStatus 0 SControl 300)
[    2.129101] usb 2-4: New USB device found, idVendor=0bda, idProduct=8178
[    2.129104] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.129106] usb 2-4: Product: USB WLAN
[    2.129107] usb 2-4: Manufacturer: Realtek
[    2.129108] usb 2-4: SerialNumber: 00e04c000001
[    2.144560] usb 5-3: New USB device found, idVendor=046d, idProduct=c52f
[    2.144563] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.144564] usb 5-3: Product: USB Receiver
[    2.144565] usb 5-3: Manufacturer: Logitech
[    2.147494] ata3: softreset failed (device not ready)
[    2.147499] ata3: applying PMP SRST workaround and retrying
[    2.151715] hidraw: raw HID events driver (C) Jiri Kosina
[    2.160725] usbcore: registered new interface driver usbhid
[    2.160727] usbhid: USB HID core driver
[    2.162284] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/0003:046D:C52F.0001/input/input3
[    2.162380] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-3/input0
[    2.163514] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.163565] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.165122] ata9.00: HPA detected: current 234439535, native 234441648
[    2.165132] ata9.00: supports DRM functions and may not be fully accessible
[    2.165494] ata9.00: disabling queued TRIM support
[    2.165502] ata9.00: ATA-9: Samsung SSD 850 EVO 120GB, EMT02B6Q, max UDMA/133
[    2.165504] ata9.00: 234439535 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.165650] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.1/0003:046D:C52F.0002/input/input4
[    2.166004] ata9.00: supports DRM functions and may not be fully accessible
[    2.166308] ata9.00: disabling queued TRIM support
[    2.166535] ata9.00: configured for UDMA/133
[    2.169906] ata10.00: HPA detected: current 488395055, native 488397168
[    2.169977] ata10.00: ATA-7: SAMSUNG HD251HJ, 1AC01113, max UDMA7
[    2.169985] ata10.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.176456] ata10.00: configured for UDMA/133
[    2.219622] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-3/input1
[    2.227504] tsc: Refined TSC clocksource calibration: 3013.725 MHz
[    2.227508] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b70ea843fc, max_idle_ns: 440795213347 ns
[    2.227580] firewire_core 0000:04:0e.0: created device fw0: GUID 001bf8700000241d, S400
[    2.319500] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.319846] ata3.00: HPA detected: current 117229295, native 117231408
[    2.319872] ata3.00: ATA-8: Corsair Force LS SSD, S8FM08.1, max UDMA/133
[    2.319874] ata3.00: 117229295 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.320243] ata3.00: configured for UDMA/133
[    2.320439] scsi 1:0:0:0: Direct-Access     ATA      Corsair Force LS 08.1 PQ: 0 ANSI: 5
[    2.320640] sd 1:0:0:0: [sda] 117229295 512-byte logical blocks: (60.0 GB/55.9 GiB)
[    2.320662] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    2.320691] sd 1:0:0:0: [sda] Write Protect is off
[    2.320694] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.320785] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.320892] scsi 8:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
[    2.321057] sd 8:0:0:0: [sdb] 234439535 512-byte logical blocks: (120 GB/112 GiB)
[    2.321123] sd 8:0:0:0: [sdb] Write Protect is off
[    2.321125] sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.321133] sd 8:0:0:0: Attached scsi generic sg1 type 0
[    2.321143] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.321570] scsi 9:0:0:0: Direct-Access     ATA      SAMSUNG HD251HJ  1113 PQ: 0 ANSI: 5
[    2.321740] sd 9:0:0:0: [sdc] 488395055 512-byte logical blocks: (250 GB/233 GiB)
[    2.321742] sd 9:0:0:0: Attached scsi generic sg2 type 0
[    2.321779] sd 9:0:0:0: [sdc] Write Protect is off
[    2.321781] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.321812] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.322476]  sda: sda1 sda2 < sda5 >
[    2.322759] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.323349]  sdb: sdb1 sdb2
[    2.323585] sd 8:0:0:0: [sdb] Attached SCSI disk
[    2.332532]  sdc: sdc1 sdc2
[    2.332766] sd 9:0:0:0: [sdc] Attached SCSI disk
[    2.551542] [drm] ib test on ring 5 succeeded
[    2.552167] [drm] Radeon Display Connectors
[    2.552169] [drm] Connector 0:
[    2.552170] [drm]   DVI-I-1
[    2.552171] [drm]   HPD1
[    2.552172] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[    2.552173] [drm]   Encoders:
[    2.552174] [drm]     DFP1: INTERNAL_UNIPHY
[    2.552175] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    2.552176] [drm] Connector 1:
[    2.552177] [drm]   DIN-1
[    2.552177] [drm]   Encoders:
[    2.552178] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[    2.552179] [drm] Connector 2:
[    2.552180] [drm]   DVI-I-2
[    2.552180] [drm]   HPD2
[    2.552182] [drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[    2.552183] [drm]   Encoders:
[    2.552183] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.552184] [drm]     DFP2: INTERNAL_KLDSCP_LVTMA
[    2.604803] [drm] fb mappable at 0xD0459000
[    2.604806] [drm] vram apper at 0xD0000000
[    2.604807] [drm] size 5324800
[    2.604808] [drm] fb depth is 24
[    2.604809] [drm]    pitch is 5888
[    2.604895] fbcon: radeondrmfb (fb0) is primary device
[    2.604996] Console: switching to colour frame buffer device 180x56
[    2.605018] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    2.619514] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[    2.793680] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.903809] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    2.903932] systemd[1]: Detected architecture x86-64.
[    2.904155] systemd[1]: Set hostname to <erkam-GA-MA790X-UD3P>.
[    2.989253] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.989384] systemd[1]: Created slice System Slice.
[    2.989432] systemd[1]: Listening on Syslog Socket.
[    2.989448] systemd[1]: Reached target Remote File Systems (Pre).
[    2.989462] systemd[1]: Reached target Remote File Systems.
[    2.989521] systemd[1]: Listening on Journal Audit Socket.
[    2.989537] systemd[1]: Reached target User and Group Name Lookups.
[    2.989568] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    2.989643] systemd[1]: Created slice User and Session Slice.
[    2.989658] systemd[1]: Reached target Slices.
[    2.989682] systemd[1]: Listening on udev Kernel Socket.
[    2.989712] systemd[1]: Listening on udev Control Socket.
[    2.989736] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.989762] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.989778] systemd[1]: Reached target Encrypted Volumes.
[    2.989815] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.989856] systemd[1]: Listening on Journal Socket.
[    3.003624] systemd[1]: Starting Journal Service...
[    3.004080] systemd[1]: Starting Set console keymap...
[    3.005453] systemd[1]: Starting Load Kernel Modules...
[    3.006002] systemd[1]: Starting Uncomplicated firewall...
[    3.006524] systemd[1]: Mounting POSIX Message Queue File System...
[    3.007279] systemd[1]: Mounting Debug File System...
[    3.008000] systemd[1]: Started Read required files in advance.
[    3.009182] systemd[1]: Mounting Huge Pages File System...
[    3.009746] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.010320] systemd[1]: Started Braille Device Support.
[    3.021661] systemd[1]: Started Uncomplicated firewall.
[    3.021877] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    3.029165] systemd[1]: Mounted POSIX Message Queue File System.
[    3.029211] systemd[1]: Mounted Huge Pages File System.
[    3.029239] systemd[1]: Mounted Debug File System.
[    3.033082] lp: driver loaded but no devices found
[    3.044549] ppdev: user-space parallel port driver
[    3.067900] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.069148] systemd[1]: Started Load Kernel Modules.
[    3.069970] systemd[1]: Starting Apply Kernel Variables...
[    3.070601] systemd[1]: Mounting FUSE Control File System...
[    3.074298] systemd[1]: Mounted FUSE Control File System.
[    3.077239] systemd[1]: Started Apply Kernel Variables.
[    3.083153] systemd[1]: Started Journal Service.
[    3.144877] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    3.171839] systemd-journald[242]: Received request to flush runtime journal from PID 1
[    3.231767] clocksource: Switched to clocksource tsc
[    3.305075] audit: type=1400 audit(1468926555.211:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=478 comm="apparmor_parser"
[    3.305084] audit: type=1400 audit(1468926555.211:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=478 comm="apparmor_parser"
[    3.305088] audit: type=1400 audit(1468926555.211:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=478 comm="apparmor_parser"
[    3.305092] audit: type=1400 audit(1468926555.211:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=478 comm="apparmor_parser"
[    3.323415] audit: type=1400 audit(1468926555.227:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=479 comm="apparmor_parser"
[    3.323424] audit: type=1400 audit(1468926555.227:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=479 comm="apparmor_parser"
[    3.323429] audit: type=1400 audit(1468926555.227:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=479 comm="apparmor_parser"
[    3.323433] audit: type=1400 audit(1468926555.227:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=479 comm="apparmor_parser"
[    3.323437] audit: type=1400 audit(1468926555.227:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=479 comm="apparmor_parser"
[    3.331934] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.378874] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20150930/utaddress-254)
[    3.378881] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.397405] EDAC MC: Ver: 3.0.0
[    3.401473] MCE: In-kernel MCE decoding enabled.
[    3.402660] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    3.404721] AMD64 EDAC driver v3.4.0
[    3.404742] EDAC amd64: DRAM ECC disabled.
[    3.404747] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    3.488637] Adding 4900860k swap on /dev/sda5.  Priority:-1 extents:1 across:4900860k SSFS
[    3.516045] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    3.516923] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    3.516928] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.516930] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    3.516932] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.516934] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    3.516935] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.516937] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    3.516939] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    3.516940] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    3.516942] snd_hda_codec_realtek hdaudioC0D0:      CD=0x1c
[    3.516943] snd_hda_codec_realtek hdaudioC0D0:    dig-in=0x1f
[    3.525422] random: nonblocking pool is initialized
[    3.528217] kvm: Nested Virtualization enabled
[    3.528220] kvm: Nested Paging enabled
[    3.538644] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[    3.544289] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[    3.544580] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[    3.544639] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[    3.544691] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[    3.544739] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    3.544793] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    3.544851] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[    4.152726] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    4.160827] r8169 0000:03:00.0 enp3s0: link down
[    4.160866] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    4.551887] rtlwifi: module verification failed: signature and/or required key missing - tainting kernel
[    4.555890] Chip version 0x11
[    4.568650] cfg80211: World regulatory domain updated:
[    4.568653] cfg80211:  DFS Master region: unset
[    4.568654] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    4.568657] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    4.568659] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    4.568660] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    4.568662] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    4.568664] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    4.568665] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    4.568666] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    4.568668] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    4.632513] Board Type 0
[    4.632758] rx_max_size 15360, rx_urb_num 8, in_ep 1
[    4.632760] rtlwifi: channel plan 0x0
[    4.632761] rtlwifi: bad channel plan 0x0
[    4.632762] rtlwifi: country code 11
[    4.632796] Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[    4.639035] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    4.639311] usbcore: registered new interface driver rtl8192cu
[    4.643410] usbcore: registered new interface driver rtl8xxxu
[    4.646069] rtl8192cu 2-4:1.0 wlxf4f26d155816: renamed from wlan0
[    4.669223] IPv6: ADDRCONF(NETDEV_UP): wlxf4f26d155816: link is not ready
[    4.672389] MAC auto ON okay!
[    4.714260] Tx queue select: 0x05
[    5.143881] IPv6: ADDRCONF(NETDEV_UP): wlxf4f26d155816: link is not ready
[    5.199091] IPv6: ADDRCONF(NETDEV_UP): wlxf4f26d155816: link is not ready
[    6.113070] wlxf4f26d155816: authenticate with 14:dd:a9:4b:a3:30
[    6.130803] wlxf4f26d155816: send auth to 14:dd:a9:4b:a3:30 (try 1/3)
[    6.133156] wlxf4f26d155816: authenticated
[    6.135853] wlxf4f26d155816: associating with AP with corrupt probe response
[    6.139702] wlxf4f26d155816: associate with 14:dd:a9:4b:a3:30 (try 1/3)
[    6.175153] wlxf4f26d155816: RX AssocResp from 14:dd:a9:4b:a3:30 (capab=0x431 status=0 aid=1)
[    6.176654] wlxf4f26d155816: associated
[    6.176702] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf4f26d155816: link becomes ready
[    6.205480] cfg80211: Regulatory domain changed to country: DE
[    6.205485] cfg80211:  DFS Master region: ETSI
[    6.205487] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    6.205489] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    6.205491] cfg80211:   (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    6.205493] cfg80211:   (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    6.205495] cfg80211:   (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[    6.205496] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[  781.297378] audit_printk_skb: 36 callbacks suppressed
[  781.297383] audit: type=1400 audit(1468927333.837:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=5497 comm="apparmor_parser"
[  930.564430] wlxf4f26d155816: deauthenticating from 14:dd:a9:4b:a3:30 by local choice (Reason: 3=DEAUTH_LEAVING)
[  930.628460] cfg80211: World regulatory domain updated:
[  930.628465] cfg80211:  DFS Master region: unset
[  930.628467] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  930.628470] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  930.628471] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  930.628473] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[  930.628475] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[  930.628476] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[  930.628478] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[  930.628479] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[  930.628481] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[  932.616292] MAC auto ON okay!
[  932.651474] Tx queue select: 0x05
[  933.100033] IPv6: ADDRCONF(NETDEV_UP): wlxf4f26d155816: link is not ready
[  933.980035] wlxf4f26d155816: authenticate with 14:dd:a9:4b:a3:30
[  933.992014] wlxf4f26d155816: send auth to 14:dd:a9:4b:a3:30 (try 1/3)
[  933.994008] wlxf4f26d155816: authenticated
[  933.994170] wlxf4f26d155816: associating with AP with corrupt probe response
[  933.995109] wlxf4f26d155816: associate with 14:dd:a9:4b:a3:30 (try 1/3)
[  934.022781] wlxf4f26d155816: RX AssocResp from 14:dd:a9:4b:a3:30 (capab=0x431 status=0 aid=1)
[  934.024369] wlxf4f26d155816: associated
[  934.024412] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf4f26d155816: link becomes ready
[  934.050649] cfg80211: Regulatory domain changed to country: DE
[  934.050653] cfg80211:  DFS Master region: ETSI
[  934.050654] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  934.050657] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  934.050659] cfg80211:   (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[  934.050661] cfg80211:   (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[  934.050663] cfg80211:   (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[  934.050664] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 2081.350554] usb 2-4: USB disconnect, device number 3
[ 2081.359263] wlxf4f26d155816: deauthenticating from 14:dd:a9:4b:a3:30 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2081.359780] reg 0x102, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x4d5
[ 2081.359785] reg 0x422, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x390262a
[ 2081.359788] reg 0x542, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x26262628
[ 2081.359794] reg 0x1cc, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x26262628
[ 2081.424765] cfg80211: World regulatory domain updated:
[ 2081.424769] cfg80211:  DFS Master region: unset
[ 2081.424771] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2081.424773] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2081.424775] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2081.424776] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 2081.424778] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 2081.424780] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 2081.424782] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 2081.424783] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 2081.424784] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 2082.719335] usb 2-4: new high-speed USB device number 4 using ehci-pci
[ 2082.852959] usb 2-4: New USB device found, idVendor=0bda, idProduct=8178
[ 2082.852964] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2082.852966] usb 2-4: Product: USB WLAN
[ 2082.852967] usb 2-4: Manufacturer: Realtek
[ 2082.852969] usb 2-4: SerialNumber: 00e04c000001
[ 2082.853454] Chip version 0x11
[ 2082.929828] Board Type 0
[ 2082.930073] rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 2082.930075] rtlwifi: channel plan 0x0
[ 2082.930076] rtlwifi: bad channel plan 0x0
[ 2082.930077] rtlwifi: country code 11
[ 2082.930116] Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 2082.930261] ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
[ 2083.946827] rtl8192cu 2-4:1.0 wlxf4f26d155816: renamed from wlan0
[ 2083.968348] IPv6: ADDRCONF(NETDEV_UP): wlxf4f26d155816: link is not ready
[ 2083.972550] MAC auto ON okay!
[ 2084.005234] Tx queue select: 0x05
[ 2084.418039] IPv6: ADDRCONF(NETDEV_UP): wlxf4f26d155816: link is not ready
[ 2084.461110] IPv6: ADDRCONF(NETDEV_UP): wlxf4f26d155816: link is not ready
[ 2085.344581] wlxf4f26d155816: authenticate with 14:dd:a9:4b:a3:30
[ 2085.355910] wlxf4f26d155816: send auth to 14:dd:a9:4b:a3:30 (try 1/3)
[ 2085.359877] wlxf4f26d155816: authenticated
[ 2085.360099] wlxf4f26d155816: associating with AP with corrupt probe response
[ 2085.363566] wlxf4f26d155816: associate with 14:dd:a9:4b:a3:30 (try 1/3)
[ 2085.370401] wlxf4f26d155816: RX AssocResp from 14:dd:a9:4b:a3:30 (capab=0x431 status=0 aid=1)
[ 2085.372265] wlxf4f26d155816: associated
[ 2085.372303] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf4f26d155816: link becomes ready
[ 2085.403462] cfg80211: Regulatory domain changed to country: DE
[ 2085.403466] cfg80211:  DFS Master region: ETSI
[ 2085.403467] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2085.403470] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2085.403472] cfg80211:   (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 2085.403474] cfg80211:   (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 2085.403475] cfg80211:   (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[ 2085.403477] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)


dmesg | tail

Kod Seç Genişlet

[ 2085.372265] wlxf4f26d155816: associated
[ 2085.372303] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf4f26d155816: link becomes ready
[ 2085.403462] cfg80211: Regulatory domain changed to country: DE
[ 2085.403466] cfg80211:  DFS Master region: ETSI
[ 2085.403467] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2085.403470] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2085.403472] cfg80211:   (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 2085.403474] cfg80211:   (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 2085.403475] cfg80211:   (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[ 2085.403477] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)


[bugra9]

Sadece yavaş mı yoksa kopma gibi farklı sorunlar da yaşatıyor mu?

[earcome]

Sadece yavaş mı yoksa kopma gibi farklı sorunlar da yaşatıyor mu?

Kopma yaşamıyorum sadece hız düşük birde normalde adaptörün ışığı internet trafiğine göre yanıp sönmesi lazım ışık sürekli sabit duruyor

[kartal]

Hızınızın düşme sebebinin internetten değil de makinanınızdan kaynaklandığına nasıl emin oldunuz?
Bir de hızı ölçmenin en garanti yolu system monitor/task manager i açıp dosya indirirken ölçülen hızı gözlemlemektir
Kablo ile ve kablosuz olarak karşılaştırma şansınız var mı?

[earcome]

Hızınızın düşme sebebinin internetten değil de makinanınızdan kaynaklandığına nasıl emin oldunuz?
Bir de hızı ölçmenin en garanti yolu system monitor/task manager i açıp dosya indirirken ölçülen hızı gözlemlemektir

çift işletim sistemi kullanıyorum windows üzerinde 2000kbs hız kullanabiliyorken ubuntu 45kbs civarı gözüküyor çeşitli testler vs. yaptım sonuç aynı sorun internetten kaynaklı değil yani

[kartal]

Şöyle bir çözm önerilmiş;
https://github.com/pvaret/rtl8192cu-fixes

[mhmtkrktr]

Kullandığın kart Linux te sorunlu değil diye biliyorum. Gerçi araştırmadım ama 2 gün önce aynı kartı kullandım bi sorun olmamıştı bende.

2000 ve 45. Peki bu değerleri nasıl ölçüyorsun, önce bunu bilmek gerekir. Torrent uygulaması mı, tarayıcı ile dosya indirirken mi vb. ? Bu şekilde ise, aynı kaynaktan aynı dosyamı?
Biraz daha ayrıntı lütfen.

[eronis]

Kullandığın bir VPN programı var mı ? Tarayıcında kaç eklenti var ? Tor yada benzeri bir ağ kullanıyor musun ? Hangi sitelere girmeye çalıştın yada ne yavaş indi ?