İnternet hızım çok yavaş

Başlatan earcome, 19 Temmuz 2016 - 14:51:17

« önceki - sonraki »

0 Üyeler ve 4 Ziyaretçi konuyu incelemekte.

earcome

wirless adaptör kullanıyorum modeli tp-link wn822n v3 ne yaptıysam hızını düzeltemedim aşırı yavaş bazı forumlarda driverı buglı olduğu söyleniyor nasıl düzeltebilirim yardımınızı bekliyorum  :)

cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04 LTS"


uname -a
Linux erkam-GA-MA790X-UD3P 4.4.0-31-generic #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux


lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD780 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RX780/RD790 PCI to PCI bridge (external gfx0 port A)
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD790 PCI to PCI bridge (PCI express gpp port A)
00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD790 PCI to PCI bridge (PCI express gpp port F)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3a)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV770 [Radeon HD 4850]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV770 HDMI Audio [Radeon HD 4850/4870]
02:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
02:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
04:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)


lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


rfkill list
1: phy1: Wireless LAN
Soft blocked: no
Hard blocked: no


sudo lshw -C network
*-network               
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: enp3s0
       version: 02
       serial: 00:24:1d:71:aa:b1
       size: 10Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       resources: irq:27 ioport:ce00(size=256) memory:fdfff000-fdffffff memory:fdfe0000-fdfeffff memory:fd900000-fd90ffff
  *-network
       description: Wireless interface
       physical id: 1
       bus info: usb@2:4
       logical name: wlxf4f26d155816
       serial: f4:f2:6d:15:58:16
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rtl8192cu driverversion=4.4.0-31-generic firmware=N/A ip=10.1.1.12 link=yes multicast=yes wireless=IEEE 802.11bgn


ifconfig
enp3s0    Link encap:Ethernet  HWaddr 00:24:1d:71:aa:b1 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:2573 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2573 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:214809 (214.8 KB)  TX bytes:214809 (214.8 KB)

wlxf4f26d155816 Link encap:Ethernet  HWaddr f4:f2:6d:15:58:16 
          inet addr:10.1.1.12  Bcast:10.1.1.255  Mask:255.255.255.0
          inet6 addr: fe80::f6f2:6dff:fe15:5816/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:381 errors:0 dropped:0 overruns:0 frame:0
          TX packets:249 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:93203 (93.2 KB)  TX bytes:77830 (77.8 KB)


iwconfig
lo        no wireless extensions.

wlxf4f26d155816  IEEE 802.11bgn  ESSID:"Cirpici1" 
          Mode:Managed  Frequency:2.462 GHz  Access Point: 14:DD:A9:4B:A3:30   
          Bit Rate=72.2 Mb/s   Tx-Power=20 dBm   
          Retry short limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:off
          Link Quality=60/70  Signal level=-50 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:10   Missed beacon:0

enp3s0    no wireless extensions.


iwlist scanning
lo        Interface doesn't support scanning.

wlxf4f26d155816  Scan completed :
          Cell 01 - Address: 14:DD:A9:4B:A3:30
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=62/70  Signal level=-48 dBm 
                    Encryption key:on
                    ESSID:"Cirpici1"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
                              18 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=00000008ea608fd8
                    Extra: Last beacon: 59400ms ago
                    IE: Unknown: 00084369727069636931
                    IE: Unknown: 010882848B961224486C
                    IE: Unknown: 03010B
                    IE: Unknown: 2A0100
                    IE: Unknown: 32040C183060
                    IE: Unknown: 2D1AEC1117FFFF000001000000000000000000000000000000000000
                    IE: Unknown: 3D160B000600000000000000000000000000000000000000
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 7F080000000100000000
                    IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
                    IE: Unknown: 4A0E14000A002C01C800140005001900
                    IE: Unknown: 7F080000000100000000
                    IE: Unknown: 0706444520010D10
                    IE: Unknown: DD9A0050F204104A0001101044000102103B00010310470010BC329E001DD811B2860114DDA94BA330102100154153555354654B20436F6D707574657220496E632E1023000A57505320526F757465721024000844534C2D4E3137551042000830303030303030301054000800060050F20400011011000F415355532057505320526F7574657210080002210C103C0001011049000600372A000120
                    IE: Unknown: DD07000C4303000000

enp3s0    Interface doesn't support scanning.


lsmod
Module                  Size  Used by
drbg                   32768  1
ansi_cprng             16384  0
ctr                    16384  2
ccm                    20480  2
rtl8xxxu               73728  0
arc4                   16384  2
rtl8192cu              69632  0
rtl_usb                20480  1 rtl8192cu
rtl8192c_common        53248  1 rtl8192cu
rtlwifi                77824  3 rtl_usb,rtl8192c_common,rtl8192cu
mac80211              737280  4 rtl8xxxu,rtl_usb,rtlwifi,rtl8192cu
cfg80211              565248  2 mac80211,rtlwifi
snd_hda_codec_hdmi     53248  1
kvm_amd                65536  0
snd_hda_codec_realtek    86016  1
snd_hda_codec_generic    77824  1 snd_hda_codec_realtek
kvm                   536576  1 kvm_amd
snd_hda_intel          36864  5
irqbypass              16384  1 kvm
snd_hda_codec         135168  4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hda_core           73728  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
snd_hwdep              16384  1 snd_hda_codec
joydev                 20480  0
input_leds             16384  0
snd_pcm               106496  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
serio_raw              16384  0
snd_rawmidi            32768  1 snd_seq_midi
k10temp                16384  0
edac_mce_amd           24576  0
edac_core              53248  0
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              32768  2 snd_pcm,snd_seq
i2c_piix4              24576  0
snd                    81920  21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
soundcore              16384  1 snd
shpchp                 36864  0
8250_fintek            16384  0
mac_hid                16384  0
parport_pc             32768  0
ppdev                  20480  0
lp                     20480  0
parport                49152  3 lp,ppdev,parport_pc
autofs4                40960  2
pata_acpi              16384  0
hid_generic            16384  0
usbhid                 49152  0
hid                   118784  3 hid_generic,usbhid
amdkfd                131072  1
amd_iommu_v2           20480  1 amdkfd
radeon               1515520  4
i2c_algo_bit           16384  1 radeon
ttm                    94208  1 radeon
firewire_ohci          40960  0
firewire_core          65536  1 firewire_ohci
drm_kms_helper        147456  1 radeon
crc_itu_t              16384  1 firewire_core
pata_atiixp            16384  0
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
r8169                  81920  0
fb_sys_fops            16384  1 drm_kms_helper
mii                    16384  1 r8169
drm                   360448  7 ttm,drm_kms_helper,radeon
ahci                   36864  4
libahci                32768  1 ahci
pata_jmicron           16384  0
wmi                    20480  0
floppy                 73728  0
fjes                   28672  0


dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-31-generic (buildd@lgw01-16) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1) ) #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016 (Ubuntu 4.4.0-31.50-generic 4.4.13)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-31-generic root=UUID=32d02f85-3e44-4afb-990e-530e71b3f9f1 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] tseg: 00cff00000
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA790X-UD3P/GA-MA790X-UD3P, BIOS F1 04/28/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 base 0000CFF00000 mask FFFFFFF00000 uncachable
[    0.000000]   4 base 000100000000 mask FFFFE0000000 write-back
[    0.000000]   5 base 000120000000 mask FFFFF0000000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000130000000 aka 4864M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3327MB, range: 1MB, type UC
[    0.000000] reg 4, base: 4GB, range: 512MB, type WB
[    0.000000] reg 5, base: 4608MB, range: 256MB, type WB
[    0.000000] total RAM covered: 3327M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 2M num_reg: 4  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3327MB, range: 1MB, type UC
[    0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f55a0-0x000f55af] mapped at [ffff8800000f55a0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x02200000, 0x02200fff] PGTABLE
[    0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[    0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33b00000-0x35d77fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6FB0 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 0x00000000CFEE3000 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 0x00000000CFEE3040 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 0x00000000CFEE30C0 006F3A (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 0x00000000CFEE0000 000040
[    0.000000] ACPI: HPET 0x00000000CFEEA0C0 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 0x00000000CFEEA100 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: TAMG 0x00000000CFEEA140 00030A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
[    0.000000] ACPI: APIC 0x00000000CFEEA000 000084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x12fff9000-0x12fffdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000012fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cfedffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000012fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff]
[    0.000000] On node 0 totalpages: 1048190
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13244 pages used for memmap
[    0.000000]   DMA32 zone: 847584 pages, LIFO batch:31
[    0.000000]   Normal zone: 3072 pages used for memmap
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 1 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfee0000-0xcfee2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfee3000-0xcfeeffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfef0000-0xcfefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88012fc00000 s98008 r8192 d28968 u524288
[    0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031789
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-31-generic root=UUID=32d02f85-3e44-4afb-990e-530e71b3f9f1 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xc4000000-0xc5ffffff] (32MB)
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[    0.000000] Memory: 3940996K/4192760K available (8393K kernel code, 1282K rwdata, 3940K rodata, 1480K init, 1292K bss, 251764K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] Build-time adjustment of leaf fanout to 64.
[    0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:16640 nr_irqs:456 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3013.680 MHz processor
[    0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.36 BogoMIPS (lpj=12054720)
[    0.000027] pid_max: default: 32768 minimum: 301
[    0.000032] ACPI: Core revision 20150930
[    0.002582] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.002603] Security Framework initialized
[    0.002605] Yama: becoming mindful.
[    0.002620] AppArmor: AppArmor initialized
[    0.002848] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.004112] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.004687] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.004691] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.004907] Initializing cgroup subsys io
[    0.004911] Initializing cgroup subsys memory
[    0.004918] Initializing cgroup subsys devices
[    0.004920] Initializing cgroup subsys freezer
[    0.004923] Initializing cgroup subsys net_cls
[    0.004925] Initializing cgroup subsys perf_event
[    0.004927] Initializing cgroup subsys net_prio
[    0.004930] Initializing cgroup subsys hugetlb
[    0.004933] Initializing cgroup subsys pids
[    0.004951] CPU: Physical Processor ID: 0
[    0.004952] CPU: Processor Core ID: 0
[    0.004953] mce: CPU supports 6 MCE banks
[    0.004959] LVT offset 0 assigned for vector 0xf9
[    0.004963] process: using AMD E400 aware idle routine
[    0.004965] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.004966] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[    0.005194] Freeing SMP alternatives memory: 28K (ffffffff820b4000 - ffffffff820bb000)
[    0.037629] ftrace: allocating 31994 entries in 125 pages
[    0.049831] smpboot: Max logical packages: 2
[    0.049833] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.050349] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.195169] smpboot: CPU0: AMD Phenom(tm) II X3 720 Processor (family: 0x10, model: 0x4, stepping: 0x2)
[    0.195183] Performance Events: AMD PMU driver.
[    0.195187] ... version:                0
[    0.195188] ... bit width:              48
[    0.195189] ... generic registers:      4
[    0.195190] ... value mask:             0000ffffffffffff
[    0.195191] ... max period:             00007fffffffffff
[    0.195192] ... fixed-purpose events:   0
[    0.195192] ... event mask:             000000000000000f
[    0.195812] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.195881] x86: Booting SMP configuration:
[    0.195883] .... node  #0, CPUs:      #1 #2
[    0.201146] x86: Booted up 1 node, 3 CPUs
[    0.201148] smpboot: Total of 3 processors activated (18082.08 BogoMIPS)
[    0.204682] devtmpfs: initialized
[    0.208850] evm: security.selinux
[    0.208851] evm: security.SMACK64
[    0.208852] evm: security.SMACK64EXEC
[    0.208853] evm: security.SMACK64TRANSMUTE
[    0.208854] evm: security.SMACK64MMAP
[    0.208855] evm: security.ima
[    0.208856] evm: security.capability
[    0.208966] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
[    0.209041] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.209120] pinctrl core: initialized pinctrl subsystem
[    0.209220] RTC time: 11:09:12, date: 07/19/16
[    0.209329] NET: Registered protocol family 16
[    0.219192] cpuidle: using governor ladder
[    0.231189] cpuidle: using governor menu
[    0.231196] PCCT header not found.
[    0.231202] node 0 link 0: io port [b000, ffff]
[    0.231204] TOM: 00000000d0000000 aka 3328M
[    0.231206] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[    0.231208] node 0 link 0: mmio [a0000, bffff]
[    0.231210] node 0 link 0: mmio [d0000000, dfffffff]
[    0.231212] node 0 link 0: mmio [f0000000, fe02ffff]
[    0.231213] node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff]
[    0.231215] TOM2: 0000000130000000 aka 4864M
[    0.231217] bus: [bus 00-04] on node 0 link 0
[    0.231218] bus: 00 [io  0x0000-0xffff]
[    0.231219] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.231220] bus: 00 [mem 0xd0000000-0xdfffffff]
[    0.231221] bus: 00 [mem 0xe0500000-0xffffffff]
[    0.231222] bus: 00 [mem 0xe0100000-0xe04fffff]
[    0.231223] bus: 00 [mem 0x130000000-0xfcffffffff]
[    0.231305] ACPI: bus type PCI registered
[    0.231307] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.231385] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.231388] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.231397] PCI: Using configuration type 1 for base access
[    0.243616] ACPI: Added _OSI(Module Device)
[    0.243619] ACPI: Added _OSI(Processor Device)
[    0.243620] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.243621] ACPI: Added _OSI(Processor Aggregator Device)
[    0.249218] ACPI: Interpreter enabled
[    0.249230] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.249235] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.249246] ACPI: (supports S0 S3 S4 S5)
[    0.249248] ACPI: Using IOAPIC for interrupt routing
[    0.249311] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.252551] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.252557] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.252561] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.252748] PCI host bridge to bus 0000:00
[    0.252751] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.252753] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.252755] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.252756] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.252758] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window]
[    0.252760] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.252768] pci 0000:00:00.0: [1002:5958] type 00 class 0x060000
[    0.252782] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[    0.252858] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[    0.252888] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.252925] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.252960] pci 0000:00:04.0: [1002:597a] type 01 class 0x060400
[    0.252989] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.253023] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.253060] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
[    0.253089] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.253124] pci 0000:00:0a.0: System wakeup disabled by ACPI
[    0.253167] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[    0.253193] pci 0000:00:11.0: reg 0x10: [io  0xff00-0xff07]
[    0.253202] pci 0000:00:11.0: reg 0x14: [io  0xfe00-0xfe03]
[    0.253211] pci 0000:00:11.0: reg 0x18: [io  0xfd00-0xfd07]
[    0.253219] pci 0000:00:11.0: reg 0x1c: [io  0xfc00-0xfc03]
[    0.253228] pci 0000:00:11.0: reg 0x20: [io  0xfb00-0xfb0f]
[    0.253237] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
[    0.253257] pci 0000:00:11.0: set SATA to AHCI mode
[    0.253335] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.253350] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
[    0.253433] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.253469] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[    0.253483] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[    0.253567] pci 0000:00:12.1: System wakeup disabled by ACPI
[    0.253603] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.253627] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff]
[    0.253694] pci 0000:00:12.2: supports D1 D2
[    0.253695] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.253732] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.253770] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.253785] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[    0.253868] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.253902] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[    0.253917] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[    0.254000] pci 0000:00:13.1: System wakeup disabled by ACPI
[    0.254037] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.254061] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[    0.254128] pci 0000:00:13.2: supports D1 D2
[    0.254129] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.254166] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.254206] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.254346] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.254368] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
[    0.254377] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
[    0.254386] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
[    0.254394] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
[    0.254403] pci 0000:00:14.1: reg 0x20: [io  0xfa00-0xfa0f]
[    0.254422] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.254424] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.254425] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.254427] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.254502] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.254528] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
[    0.254584] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.254620] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.254654] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.254777] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.254843] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.254876] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.254890] pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff]
[    0.254974] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.255010] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.255071] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.255129] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.255194] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.255256] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.255354] pci 0000:01:00.0: [1002:9442] type 00 class 0x030000
[    0.255375] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.255384] pci 0000:01:00.0: reg 0x18: [mem 0xfdee0000-0xfdeeffff 64bit]
[    0.255390] pci 0000:01:00.0: reg 0x20: [io  0xee00-0xeeff]
[    0.255401] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.255422] pci 0000:01:00.0: supports D1 D2
[    0.255458] pci 0000:01:00.1: [1002:aa30] type 00 class 0x040300
[    0.255479] pci 0000:01:00.1: reg 0x10: [mem 0xfdefc000-0xfdefffff 64bit]
[    0.255523] pci 0000:01:00.1: supports D1 D2
[    0.263201] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.263206] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.263209] pci 0000:00:02.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.263212] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.263270] pci 0000:02:00.0: [197b:2363] type 00 class 0x010185
[    0.263345] pci 0000:02:00.0: reg 0x24: [mem 0xfddfe000-0xfddfffff]
[    0.263389] pci 0000:02:00.0: PME# supported from D3hot
[    0.263440] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
[    0.263461] pci 0000:02:00.1: reg 0x10: [io  0xdf00-0xdf07]
[    0.263468] pci 0000:02:00.1: reg 0x14: [io  0xde00-0xde03]
[    0.263475] pci 0000:02:00.1: reg 0x18: [io  0xdd00-0xdd07]
[    0.263483] pci 0000:02:00.1: reg 0x1c: [io  0xdc00-0xdc03]
[    0.263490] pci 0000:02:00.1: reg 0x20: [io  0xdb00-0xdb0f]
[    0.263559] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.263565] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.263568] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    0.263570] pci 0000:00:04.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.263573] pci 0000:00:04.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.263609] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.263636] pci 0000:03:00.0: reg 0x10: [io  0xce00-0xceff]
[    0.263655] pci 0000:03:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[    0.263668] pci 0000:03:00.0: reg 0x20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
[    0.263676] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.263717] pci 0000:03:00.0: supports D1 D2
[    0.263719] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.271199] pci 0000:00:0a.0: PCI bridge to [bus 03]
[    0.271204] pci 0000:00:0a.0:   bridge window [io  0xc000-0xcfff]
[    0.271206] pci 0000:00:0a.0:   bridge window [mem 0xfd900000-0xfd9fffff]
[    0.271209] pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.271276] pci 0000:04:0e.0: [104c:8024] type 00 class 0x0c0010
[    0.271306] pci 0000:04:0e.0: reg 0x10: [mem 0xfdbff000-0xfdbff7ff]
[    0.271318] pci 0000:04:0e.0: reg 0x14: [mem 0xfdbf8000-0xfdbfbfff]
[    0.271402] pci 0000:04:0e.0: supports D1 D2
[    0.271403] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
[    0.271471] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[    0.271474] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
[    0.271478] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.271482] pci 0000:00:14.4:   bridge window [mem 0xfda00000-0xfdafffff pref]
[    0.271484] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.271485] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.271487] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.271489] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.271490] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xfebfffff window] (subtractive decode)
[    0.271675] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.271714] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.271750] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.271786] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.271821] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.271855] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.271890] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.271925] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.272379] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.272381] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.272383] vgaarb: loaded
[    0.272384] vgaarb: bridge control possible 0000:01:00.0
[    0.272618] SCSI subsystem initialized
[    0.272689] libata version 3.00 loaded.
[    0.272708] ACPI: bus type USB registered
[    0.272724] usbcore: registered new interface driver usbfs
[    0.272732] usbcore: registered new interface driver hub
[    0.272749] usbcore: registered new device driver usb
[    0.272900] PCI: Using ACPI for IRQ routing
[    0.281093] PCI: pci_cache_line_size set to 64 bytes
[    0.281150] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.281152] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
[    0.281267] NetLabel: Initializing
[    0.281268] NetLabel:  domain hash size = 128
[    0.281269] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.281278] NetLabel:  unlabeled traffic allowed by default
[    0.281367] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.281370] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.283431] clocksource: Switched to clocksource hpet
[    0.289468] AppArmor: AppArmor Filesystem Enabled
[    0.289525] pnp: PnP ACPI init
[    0.289619] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.289622] system 00:00: [io  0x0220-0x0225] has been reserved
[    0.289624] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.289627] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.289818] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    0.289827] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[    0.289851] system 00:01: [io  0x4100-0x411f] has been reserved
[    0.289853] system 00:01: [io  0x0228-0x022f] has been reserved
[    0.289855] system 00:01: [io  0x040b] has been reserved
[    0.289856] system 00:01: [io  0x04d6] has been reserved
[    0.289858] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.289860] system 00:01: [io  0x0c14] has been reserved
[    0.289861] system 00:01: [io  0x0c50-0x0c52] has been reserved
[    0.289863] system 00:01: [io  0x0c6c-0x0c6d] has been reserved
[    0.289865] system 00:01: [io  0x0c6f] has been reserved
[    0.289866] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.289868] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.289870] system 00:01: [io  0x0cd4-0x0cdf] has been reserved
[    0.289872] system 00:01: [io  0x4000-0x40fe] could not be reserved
[    0.289874] system 00:01: [io  0x4210-0x4217] has been reserved
[    0.289875] system 00:01: [io  0x0b00-0x0b0f] has been reserved
[    0.289877] system 00:01: [io  0x0b10-0x0b1f] has been reserved
[    0.289879] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    0.289881] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[    0.289884] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.290003] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.290118] pnp 00:03: [dma 2]
[    0.290146] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.290309] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.290358] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.290406] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.290409] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.290516] system 00:07: [mem 0x000cf800-0x000cffff] has been reserved
[    0.290518] system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.290520] system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.290522] system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.290524] system 00:07: [mem 0xcfee0000-0xcfefffff] could not be reserved
[    0.290526] system 00:07: [mem 0xffff0000-0xffffffff] has been reserved
[    0.290527] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.290529] system 00:07: [mem 0x00100000-0xcfedffff] could not be reserved
[    0.290531] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.290533] system 00:07: [mem 0xfee00000-0xfee00fff] could not be reserved
[    0.290535] system 00:07: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.290537] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.290552] pnp: PnP ACPI: found 8 devices
[    0.297030] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.297057] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[    0.297059] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.297062] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.297064] pci 0000:00:02.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.297067] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.297070] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.297072] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    0.297074] pci 0000:00:04.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.297076] pci 0000:00:04.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.297080] pci 0000:03:00.0: BAR 6: assigned [mem 0xfd900000-0xfd90ffff pref]
[    0.297082] pci 0000:00:0a.0: PCI bridge to [bus 03]
[    0.297083] pci 0000:00:0a.0:   bridge window [io  0xc000-0xcfff]
[    0.297086] pci 0000:00:0a.0:   bridge window [mem 0xfd900000-0xfd9fffff]
[    0.297088] pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.297092] pci 0000:00:14.4: PCI bridge to [bus 04]
[    0.297094] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
[    0.297099] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.297102] pci 0000:00:14.4:   bridge window [mem 0xfda00000-0xfdafffff pref]
[    0.297109] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.297111] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.297112] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.297114] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.297116] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff window]
[    0.297117] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.297119] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.297121] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.297123] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.297124] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[    0.297126] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.297127] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.297129] pci_bus 0000:03: resource 1 [mem 0xfd900000-0xfd9fffff]
[    0.297131] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.297132] pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
[    0.297134] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
[    0.297136] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
[    0.297137] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.297139] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.297141] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.297142] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.297144] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xfebfffff window]
[    0.297175] NET: Registered protocol family 2
[    0.297335] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.297430] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.297577] TCP: Hash tables configured (established 32768 bind 32768)
[    0.297620] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.297647] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.297706] NET: Registered protocol family 1
[    0.719617] pci 0000:01:00.0: Video device with shadowed ROM
[    0.719625] pci 0000:02:00.0: async suspend disabled to avoid multi-function power-on ordering issue
[    0.719628] pci 0000:02:00.1: async suspend disabled to avoid multi-function power-on ordering issue
[    0.719636] PCI: CLS 4 bytes, default 64
[    0.719698] Trying to unpack rootfs image as initramfs...
[    1.222364] Freeing initrd memory: 35296K (ffff880033b00000 - ffff880035d78000)
[    1.222634] PCI-DMA: Disabling AGP.
[    1.222712] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    1.222713] PCI-DMA: using GART IOMMU.
[    1.222716] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.225731] LVT offset 1 assigned for vector 0x400
[    1.225741] IBS: LVT offset 1 assigned
[    1.225775] perf: AMD IBS detected (0x0000001f)
[    1.225862] Scanning for low memory corruption every 60 seconds
[    1.226161] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.226189] audit: initializing netlink subsys (disabled)
[    1.226213] audit: type=2000 audit(1468926553.092:1): initialized
[    1.226495] Initialise system trusted keyring
[    1.226652] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    1.226653] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.228050] zbud: loaded
[    1.228303] VFS: Disk quotas dquot_6.6.0
[    1.228333] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.228567] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.228855] fuse init (API version 7.23)
[    1.228975] Key type big_key registered
[    1.228996] Allocating IMA MOK and blacklist keyrings.
[    1.229419] Key type asymmetric registered
[    1.229422] Asymmetric key parser 'x509' registered
[    1.229453] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.229487] io scheduler noop registered
[    1.229489] io scheduler deadline registered (default)
[    1.229515] io scheduler cfq registered
[    1.229998] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.230004] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.230030] vesafb: mode is 1152x864x32, linelength=4608, pages=0
[    1.230031] vesafb: scrolling: redraw
[    1.230033] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.230047] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000800000, using 3904k, total 3904k
[    1.230161] Console: switching to colour frame buffer device 144x54
[    1.230177] fb0: VESA VGA frame buffer device
[    1.230248] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.230252] ACPI: Power Button [PWRB]
[    1.230290] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.230292] ACPI: Power Button [PWRF]
[    1.230475] GHES: HEST is not enabled!
[    1.230551] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.251009] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.252550] Linux agpgart interface v0.103
[    1.254920] brd: module loaded
[    1.255959] loop: module loaded
[    1.256177] libphy: Fixed MDIO Bus: probed
[    1.256180] tun: Universal TUN/TAP device driver, 1.6
[    1.256181] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.256211] PPP generic driver version 2.4.2
[    1.256260] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.256264] ehci-pci: EHCI PCI platform driver
[    1.256384] QUIRK: Enable AMD PLL fix
[    1.256405] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.256414] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.256418] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.256420] ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[    1.256431] ehci-pci 0000:00:12.2: debug port 1
[    1.256475] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
[    1.267507] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.267559] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.267562] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.267563] usb usb1: Product: EHCI Host Controller
[    1.267565] usb usb1: Manufacturer: Linux 4.4.0-31-generic ehci_hcd
[    1.267566] usb usb1: SerialNumber: 0000:00:12.2
[    1.267695] hub 1-0:1.0: USB hub found
[    1.267704] hub 1-0:1.0: 6 ports detected
[    1.267964] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.267970] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.267973] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.267975] ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[    1.267987] ehci-pci 0000:00:13.2: debug port 1
[    1.268031] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
[    1.279501] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.279567] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.279569] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.279570] usb usb2: Product: EHCI Host Controller
[    1.279572] usb usb2: Manufacturer: Linux 4.4.0-31-generic ehci_hcd
[    1.279573] usb usb2: SerialNumber: 0000:00:13.2
[    1.279698] hub 2-0:1.0: USB hub found
[    1.279704] hub 2-0:1.0: 6 ports detected
[    1.279841] ehci-platform: EHCI generic platform driver
[    1.279852] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.279856] ohci-pci: OHCI PCI platform driver
[    1.279982] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.279987] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.280019] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
[    1.339516] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.339520] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.339522] usb usb3: Product: OHCI PCI host controller
[    1.339523] usb usb3: Manufacturer: Linux 4.4.0-31-generic ohci_hcd
[    1.339525] usb usb3: SerialNumber: 0000:00:12.0
[    1.339660] hub 3-0:1.0: USB hub found
[    1.339669] hub 3-0:1.0: 3 ports detected
[    1.339880] ohci-pci 0000:00:12.1: OHCI PCI host controller
[    1.339885] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[    1.339906] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
[    1.399513] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.399517] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.399518] usb usb4: Product: OHCI PCI host controller
[    1.399520] usb usb4: Manufacturer: Linux 4.4.0-31-generic ohci_hcd
[    1.399521] usb usb4: SerialNumber: 0000:00:12.1
[    1.399661] hub 4-0:1.0: USB hub found
[    1.399669] hub 4-0:1.0: 3 ports detected
[    1.399880] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.399886] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.399921] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
[    1.459514] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.459518] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.459520] usb usb5: Product: OHCI PCI host controller
[    1.459521] usb usb5: Manufacturer: Linux 4.4.0-31-generic ohci_hcd
[    1.459522] usb usb5: SerialNumber: 0000:00:13.0
[    1.459659] hub 5-0:1.0: USB hub found
[    1.459668] hub 5-0:1.0: 3 ports detected
[    1.459880] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    1.459885] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[    1.459906] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
[    1.519515] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.519518] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.519520] usb usb6: Product: OHCI PCI host controller
[    1.519522] usb usb6: Manufacturer: Linux 4.4.0-31-generic ohci_hcd
[    1.519523] usb usb6: SerialNumber: 0000:00:13.1
[    1.519659] hub 6-0:1.0: USB hub found
[    1.519666] hub 6-0:1.0: 3 ports detected
[    1.519876] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.519881] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[    1.519902] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
[    1.579514] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.579518] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.579519] usb usb7: Product: OHCI PCI host controller
[    1.579521] usb usb7: Manufacturer: Linux 4.4.0-31-generic ohci_hcd
[    1.579522] usb usb7: SerialNumber: 0000:00:14.5
[    1.579657] hub 7-0:1.0: USB hub found
[    1.579666] hub 7-0:1.0: 2 ports detected
[    1.579760] ohci-platform: OHCI generic platform driver
[    1.579770] uhci_hcd: USB Universal Host Controller Interface driver
[    1.579833] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.579834] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.579978] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.580086] mousedev: PS/2 mouse device common for all mice
[    1.580207] rtc_cmos 00:02: RTC can wake from S4
[    1.580311] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.580344] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.580350] i2c /dev entries driver
[    1.580396] device-mapper: uevent: version 1.0.3
[    1.580452] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.580467] ledtrig-cpu: registered to indicate activity on CPUs
[    1.580799] NET: Registered protocol family 10
[    1.580974] NET: Registered protocol family 17
[    1.580984] Key type dns_resolver registered
[    1.581192] microcode: CPU0: patch_level=0x01000086
[    1.581201] microcode: CPU1: patch_level=0x01000086
[    1.581207] microcode: CPU2: patch_level=0x01000086
[    1.581238] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.581375] registered taskstats version 1
[    1.581392] Loading compiled-in X.509 certificates
[    1.582344] Loaded X.509 cert 'Build time autogenerated kernel key: cfb4d0870811f0d88a3f3259915bd8e83759f99c'
[    1.582362] zswap: loaded using pool lzo/zbud
[    1.584360] Key type trusted registered
[    1.587839] Key type encrypted registered
[    1.587849] AppArmor: AppArmor sha1 policy hashing enabled
[    1.587854] ima: No TPM chip found, activating TPM-bypass!
[    1.587880] evm: HMAC attrs: 0x1
[    1.588145]   Magic number: 8:216:176
[    1.588183] acpi device:0c: hash matches
[    1.588228] rtc_cmos 00:02: setting system clock to 2016-07-19 11:09:13 UTC (1468926553)
[    1.588318] powernow_k8: This CPU is not supported anymore, using acpi-cpufreq instead.
[    1.589176] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.589178] EDD information not available.
[    1.589228] PM: Hibernation image not present or could not be loaded.
[    1.590610] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[    1.590612] Write protecting the kernel read-only data: 14336k
[    1.591356] Freeing unused kernel memory: 1836K (ffff880001835000 - ffff880001a00000)
[    1.591783] Freeing unused kernel memory: 156K (ffff880001dd9000 - ffff880001e00000)
[    1.601876] random: systemd-udevd urandom read with 3 bits of entropy available
[    1.602530] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.627639] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.631792] Floppy drive(s): fd0 is 1.44M
[    1.633595] wmi: Mapper loaded
[    1.635102] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[    1.637134] ahci 0000:00:11.0: version 3.0
[    1.637350] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.637354] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[    1.637869] scsi host0: pata_jmicron
[    1.639813] [drm] Initialized drm 1.1.0 20060810
[    1.641336] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.641345] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.641667] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc90000740000, 00:24:1d:71:aa:b1, XID 1c4000c0 IRQ 27
[    1.641670] r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    1.641784] scsi host2: pata_jmicron
[    1.641826] ata1: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 17
[    1.641828] ata2: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 17
[    1.647667] scsi host1: ahci
[    1.651399] FDC 0 is a post-1991 82077
[    1.651508] scsi host3: ahci
[    1.651714] scsi host4: ahci
[    1.651822] scsi host5: ahci
[    1.651863] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[    1.651866] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[    1.651869] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[    1.651871] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[    1.652751] scsi host6: pata_atiixp
[    1.652965] scsi host7: pata_atiixp
[    1.653003] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[    1.653005] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[    1.671555] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.671560] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    1.671893] scsi host8: ahci
[    1.671972] scsi host9: ahci
[    1.672021] ata9: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16
[    1.672024] ata10: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 16
[    1.672665] [drm] radeon kernel modesetting enabled.
[    1.674709] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.674712] AMD IOMMUv2 functionality not available on this system
[    1.677531] CRAT table not found
[    1.677533] Finished initializing topology ret=0
[    1.677576] kfd kfd: Initialized module
[    1.677777] checking generic (d0000000 3d0000) vs hw (d0000000 10000000)
[    1.677778] fb: switching to radeondrmfb from VESA VGA
[    1.677808] Console: switching to colour dummy device 80x25
[    1.678066] [drm] initializing kernel modesetting (RV770 0x1002:0x9442 0x1787:0x2003).
[    1.678076] [drm] register mmio base: 0xFDEE0000
[    1.678077] [drm] register mmio size: 65536
[    1.678384] ATOM BIOS: RV770PRO
[    1.678407] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    1.678409] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    1.678410] [drm] Detected VRAM RAM=1024M, BAR=256M
[    1.678411] [drm] RAM width 256bits DDR
[    1.678455] [TTM] Zone  kernel: Available graphics memory: 2022872 kiB
[    1.678456] [TTM] Initializing pool allocator
[    1.678460] [TTM] Initializing DMA pool allocator
[    1.678476] [drm] radeon: 1024M of VRAM memory ready
[    1.678477] [drm] radeon: 1024M of GTT memory ready.
[    1.678489] [drm] Loading RV770 Microcode
[    1.678546] [drm] Internal thermal controller with fan control
[    1.678585] [drm] radeon: power management initialized
[    1.678643] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.679868] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    1.683608] [drm] PCIE GART of 1024M enabled (table at 0x0000000000258000).
[    1.683634] radeon 0000:01:00.0: WB enabled
[    1.683637] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800cee96c00
[    1.683639] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800cee96c0c
[    1.684007] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000056230 and cpu addr 0xffffc90001016230
[    1.684009] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.684010] [drm] Driver supports precise vblank timestamp query.
[    1.684011] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    1.684042] radeon 0000:01:00.0: radeon: using MSI.
[    1.684064] [drm] radeon: irq initialized.
[    1.696830] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    1.703540] firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    1.729908] [drm] ring test on 0 succeeded in 1 usecs
[    1.729915] [drm] ring test on 3 succeeded in 2 usecs
[    1.799559] usb 5-3: new full-speed USB device number 2 using ohci-pci
[    1.853443] usb 2-4: new high-speed USB device number 3 using ehci-pci
[    1.904595] [drm] ring test on 5 succeeded in 1 usecs
[    1.904600] [drm] UVD initialized successfully.
[    1.904716] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.904732] [drm] ib test on ring 3 succeeded in 0 usecs
[    1.971511] ata6: SATA link down (SStatus 0 SControl 300)
[    1.971546] ata4: SATA link down (SStatus 0 SControl 300)
[    1.971575] ata5: SATA link down (SStatus 0 SControl 300)
[    2.129101] usb 2-4: New USB device found, idVendor=0bda, idProduct=8178
[    2.129104] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.129106] usb 2-4: Product: USB WLAN
[    2.129107] usb 2-4: Manufacturer: Realtek
[    2.129108] usb 2-4: SerialNumber: 00e04c000001
[    2.144560] usb 5-3: New USB device found, idVendor=046d, idProduct=c52f
[    2.144563] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.144564] usb 5-3: Product: USB Receiver
[    2.144565] usb 5-3: Manufacturer: Logitech
[    2.147494] ata3: softreset failed (device not ready)
[    2.147499] ata3: applying PMP SRST workaround and retrying
[    2.151715] hidraw: raw HID events driver (C) Jiri Kosina
[    2.160725] usbcore: registered new interface driver usbhid
[    2.160727] usbhid: USB HID core driver
[    2.162284] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/0003:046D:C52F.0001/input/input3
[    2.162380] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-3/input0
[    2.163514] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.163565] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.165122] ata9.00: HPA detected: current 234439535, native 234441648
[    2.165132] ata9.00: supports DRM functions and may not be fully accessible
[    2.165494] ata9.00: disabling queued TRIM support
[    2.165502] ata9.00: ATA-9: Samsung SSD 850 EVO 120GB, EMT02B6Q, max UDMA/133
[    2.165504] ata9.00: 234439535 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.165650] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.1/0003:046D:C52F.0002/input/input4
[    2.166004] ata9.00: supports DRM functions and may not be fully accessible
[    2.166308] ata9.00: disabling queued TRIM support
[    2.166535] ata9.00: configured for UDMA/133
[    2.169906] ata10.00: HPA detected: current 488395055, native 488397168
[    2.169977] ata10.00: ATA-7: SAMSUNG HD251HJ, 1AC01113, max UDMA7
[    2.169985] ata10.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.176456] ata10.00: configured for UDMA/133
[    2.219622] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-3/input1
[    2.227504] tsc: Refined TSC clocksource calibration: 3013.725 MHz
[    2.227508] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b70ea843fc, max_idle_ns: 440795213347 ns
[    2.227580] firewire_core 0000:04:0e.0: created device fw0: GUID 001bf8700000241d, S400
[    2.319500] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.319846] ata3.00: HPA detected: current 117229295, native 117231408
[    2.319872] ata3.00: ATA-8: Corsair Force LS SSD, S8FM08.1, max UDMA/133
[    2.319874] ata3.00: 117229295 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.320243] ata3.00: configured for UDMA/133
[    2.320439] scsi 1:0:0:0: Direct-Access     ATA      Corsair Force LS 08.1 PQ: 0 ANSI: 5
[    2.320640] sd 1:0:0:0: [sda] 117229295 512-byte logical blocks: (60.0 GB/55.9 GiB)
[    2.320662] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    2.320691] sd 1:0:0:0: [sda] Write Protect is off
[    2.320694] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.320785] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.320892] scsi 8:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
[    2.321057] sd 8:0:0:0: [sdb] 234439535 512-byte logical blocks: (120 GB/112 GiB)
[    2.321123] sd 8:0:0:0: [sdb] Write Protect is off
[    2.321125] sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.321133] sd 8:0:0:0: Attached scsi generic sg1 type 0
[    2.321143] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.321570] scsi 9:0:0:0: Direct-Access     ATA      SAMSUNG HD251HJ  1113 PQ: 0 ANSI: 5
[    2.321740] sd 9:0:0:0: [sdc] 488395055 512-byte logical blocks: (250 GB/233 GiB)
[    2.321742] sd 9:0:0:0: Attached scsi generic sg2 type 0
[    2.321779] sd 9:0:0:0: [sdc] Write Protect is off
[    2.321781] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.321812] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.322476]  sda: sda1 sda2 < sda5 >
[    2.322759] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.323349]  sdb: sdb1 sdb2
[    2.323585] sd 8:0:0:0: [sdb] Attached SCSI disk
[    2.332532]  sdc: sdc1 sdc2
[    2.332766] sd 9:0:0:0: [sdc] Attached SCSI disk
[    2.551542] [drm] ib test on ring 5 succeeded
[    2.552167] [drm] Radeon Display Connectors
[    2.552169] [drm] Connector 0:
[    2.552170] [drm]   DVI-I-1
[    2.552171] [drm]   HPD1
[    2.552172] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[    2.552173] [drm]   Encoders:
[    2.552174] [drm]     DFP1: INTERNAL_UNIPHY
[    2.552175] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    2.552176] [drm] Connector 1:
[    2.552177] [drm]   DIN-1
[    2.552177] [drm]   Encoders:
[    2.552178] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[    2.552179] [drm] Connector 2:
[    2.552180] [drm]   DVI-I-2
[    2.552180] [drm]   HPD2
[    2.552182] [drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[    2.552183] [drm]   Encoders:
[    2.552183] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.552184] [drm]     DFP2: INTERNAL_KLDSCP_LVTMA
[    2.604803] [drm] fb mappable at 0xD0459000
[    2.604806] [drm] vram apper at 0xD0000000
[    2.604807] [drm] size 5324800
[    2.604808] [drm] fb depth is 24
[    2.604809] [drm]    pitch is 5888
[    2.604895] fbcon: radeondrmfb (fb0) is primary device
[    2.604996] Console: switching to colour frame buffer device 180x56
[    2.605018] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    2.619514] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[    2.793680] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.903809] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    2.903932] systemd[1]: Detected architecture x86-64.
[    2.904155] systemd[1]: Set hostname to <erkam-GA-MA790X-UD3P>.
[    2.989253] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.989384] systemd[1]: Created slice System Slice.
[    2.989432] systemd[1]: Listening on Syslog Socket.
[    2.989448] systemd[1]: Reached target Remote File Systems (Pre).
[    2.989462] systemd[1]: Reached target Remote File Systems.
[    2.989521] systemd[1]: Listening on Journal Audit Socket.
[    2.989537] systemd[1]: Reached target User and Group Name Lookups.
[    2.989568] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    2.989643] systemd[1]: Created slice User and Session Slice.
[    2.989658] systemd[1]: Reached target Slices.
[    2.989682] systemd[1]: Listening on udev Kernel Socket.
[    2.989712] systemd[1]: Listening on udev Control Socket.
[    2.989736] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.989762] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.989778] systemd[1]: Reached target Encrypted Volumes.
[    2.989815] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.989856] systemd[1]: Listening on Journal Socket.
[    3.003624] systemd[1]: Starting Journal Service...
[    3.004080] systemd[1]: Starting Set console keymap...
[    3.005453] systemd[1]: Starting Load Kernel Modules...
[    3.006002] systemd[1]: Starting Uncomplicated firewall...
[    3.006524] systemd[1]: Mounting POSIX Message Queue File System...
[    3.007279] systemd[1]: Mounting Debug File System...
[    3.008000] systemd[1]: Started Read required files in advance.
[    3.009182] systemd[1]: Mounting Huge Pages File System...
[    3.009746] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.010320] systemd[1]: Started Braille Device Support.
[    3.021661] systemd[1]: Started Uncomplicated firewall.
[    3.021877] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    3.029165] systemd[1]: Mounted POSIX Message Queue File System.
[    3.029211] systemd[1]: Mounted Huge Pages File System.
[    3.029239] systemd[1]: Mounted Debug File System.
[    3.033082] lp: driver loaded but no devices found
[    3.044549] ppdev: user-space parallel port driver
[    3.067900] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.069148] systemd[1]: Started Load Kernel Modules.
[    3.069970] systemd[1]: Starting Apply Kernel Variables...
[    3.070601] systemd[1]: Mounting FUSE Control File System...
[    3.074298] systemd[1]: Mounted FUSE Control File System.
[    3.077239] systemd[1]: Started Apply Kernel Variables.
[    3.083153] systemd[1]: Started Journal Service.
[    3.144877] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    3.171839] systemd-journald[242]: Received request to flush runtime journal from PID 1
[    3.231767] clocksource: Switched to clocksource tsc
[    3.305075] audit: type=1400 audit(1468926555.211:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=478 comm="apparmor_parser"
[    3.305084] audit: type=1400 audit(1468926555.211:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=478 comm="apparmor_parser"
[    3.305088] audit: type=1400 audit(1468926555.211:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=478 comm="apparmor_parser"
[    3.305092] audit: type=1400 audit(1468926555.211:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=478 comm="apparmor_parser"
[    3.323415] audit: type=1400 audit(1468926555.227:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=479 comm="apparmor_parser"
[    3.323424] audit: type=1400 audit(1468926555.227:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=479 comm="apparmor_parser"
[    3.323429] audit: type=1400 audit(1468926555.227:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=479 comm="apparmor_parser"
[    3.323433] audit: type=1400 audit(1468926555.227:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=479 comm="apparmor_parser"
[    3.323437] audit: type=1400 audit(1468926555.227:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=479 comm="apparmor_parser"
[    3.331934] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.378874] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20150930/utaddress-254)
[    3.378881] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.397405] EDAC MC: Ver: 3.0.0
[    3.401473] MCE: In-kernel MCE decoding enabled.
[    3.402660] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    3.404721] AMD64 EDAC driver v3.4.0
[    3.404742] EDAC amd64: DRAM ECC disabled.
[    3.404747] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    3.488637] Adding 4900860k swap on /dev/sda5.  Priority:-1 extents:1 across:4900860k SSFS
[    3.516045] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    3.516923] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    3.516928] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.516930] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    3.516932] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.516934] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    3.516935] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.516937] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    3.516939] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    3.516940] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    3.516942] snd_hda_codec_realtek hdaudioC0D0:      CD=0x1c
[    3.516943] snd_hda_codec_realtek hdaudioC0D0:    dig-in=0x1f
[    3.525422] random: nonblocking pool is initialized
[    3.528217] kvm: Nested Virtualization enabled
[    3.528220] kvm: Nested Paging enabled
[    3.538644] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[    3.544289] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[    3.544580] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[    3.544639] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[    3.544691] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[    3.544739] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    3.544793] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    3.544851] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[    4.152726] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    4.160827] r8169 0000:03:00.0 enp3s0: link down
[    4.160866] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    4.551887] rtlwifi: module verification failed: signature and/or required key missing - tainting kernel
[    4.555890] Chip version 0x11
[    4.568650] cfg80211: World regulatory domain updated:
[    4.568653] cfg80211:  DFS Master region: unset
[    4.568654] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    4.568657] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    4.568659] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    4.568660] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    4.568662] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    4.568664] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    4.568665] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    4.568666] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    4.568668] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    4.632513] Board Type 0
[    4.632758] rx_max_size 15360, rx_urb_num 8, in_ep 1
[    4.632760] rtlwifi: channel plan 0x0
[    4.632761] rtlwifi: bad channel plan 0x0
[    4.632762] rtlwifi: country code 11
[    4.632796] Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[    4.639035] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    4.639311] usbcore: registered new interface driver rtl8192cu
[    4.643410] usbcore: registered new interface driver rtl8xxxu
[    4.646069] rtl8192cu 2-4:1.0 wlxf4f26d155816: renamed from wlan0
[    4.669223] IPv6: ADDRCONF(NETDEV_UP): wlxf4f26d155816: link is not ready
[    4.672389] MAC auto ON okay!
[    4.714260] Tx queue select: 0x05
[    5.143881] IPv6: ADDRCONF(NETDEV_UP): wlxf4f26d155816: link is not ready
[    5.199091] IPv6: ADDRCONF(NETDEV_UP): wlxf4f26d155816: link is not ready
[    6.113070] wlxf4f26d155816: authenticate with 14:dd:a9:4b:a3:30
[    6.130803] wlxf4f26d155816: send auth to 14:dd:a9:4b:a3:30 (try 1/3)
[    6.133156] wlxf4f26d155816: authenticated
[    6.135853] wlxf4f26d155816: associating with AP with corrupt probe response
[    6.139702] wlxf4f26d155816: associate with 14:dd:a9:4b:a3:30 (try 1/3)
[    6.175153] wlxf4f26d155816: RX AssocResp from 14:dd:a9:4b:a3:30 (capab=0x431 status=0 aid=1)
[    6.176654] wlxf4f26d155816: associated
[    6.176702] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf4f26d155816: link becomes ready
[    6.205480] cfg80211: Regulatory domain changed to country: DE
[    6.205485] cfg80211:  DFS Master region: ETSI
[    6.205487] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    6.205489] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    6.205491] cfg80211:   (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    6.205493] cfg80211:   (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    6.205495] cfg80211:   (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[    6.205496] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[  781.297378] audit_printk_skb: 36 callbacks suppressed
[  781.297383] audit: type=1400 audit(1468927333.837:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=5497 comm="apparmor_parser"
[  930.564430] wlxf4f26d155816: deauthenticating from 14:dd:a9:4b:a3:30 by local choice (Reason: 3=DEAUTH_LEAVING)
[  930.628460] cfg80211: World regulatory domain updated:
[  930.628465] cfg80211:  DFS Master region: unset
[  930.628467] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  930.628470] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  930.628471] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  930.628473] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[  930.628475] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[  930.628476] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[  930.628478] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[  930.628479] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[  930.628481] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[  932.616292] MAC auto ON okay!
[  932.651474] Tx queue select: 0x05
[  933.100033] IPv6: ADDRCONF(NETDEV_UP): wlxf4f26d155816: link is not ready
[  933.980035] wlxf4f26d155816: authenticate with 14:dd:a9:4b:a3:30
[  933.992014] wlxf4f26d155816: send auth to 14:dd:a9:4b:a3:30 (try 1/3)
[  933.994008] wlxf4f26d155816: authenticated
[  933.994170] wlxf4f26d155816: associating with AP with corrupt probe response
[  933.995109] wlxf4f26d155816: associate with 14:dd:a9:4b:a3:30 (try 1/3)
[  934.022781] wlxf4f26d155816: RX AssocResp from 14:dd:a9:4b:a3:30 (capab=0x431 status=0 aid=1)
[  934.024369] wlxf4f26d155816: associated
[  934.024412] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf4f26d155816: link becomes ready
[  934.050649] cfg80211: Regulatory domain changed to country: DE
[  934.050653] cfg80211:  DFS Master region: ETSI
[  934.050654] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  934.050657] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  934.050659] cfg80211:   (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[  934.050661] cfg80211:   (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[  934.050663] cfg80211:   (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[  934.050664] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 2081.350554] usb 2-4: USB disconnect, device number 3
[ 2081.359263] wlxf4f26d155816: deauthenticating from 14:dd:a9:4b:a3:30 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2081.359780] reg 0x102, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x4d5
[ 2081.359785] reg 0x422, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x390262a
[ 2081.359788] reg 0x542, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x26262628
[ 2081.359794] reg 0x1cc, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x26262628
[ 2081.424765] cfg80211: World regulatory domain updated:
[ 2081.424769] cfg80211:  DFS Master region: unset
[ 2081.424771] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2081.424773] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2081.424775] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2081.424776] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 2081.424778] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 2081.424780] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 2081.424782] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 2081.424783] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 2081.424784] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 2082.719335] usb 2-4: new high-speed USB device number 4 using ehci-pci
[ 2082.852959] usb 2-4: New USB device found, idVendor=0bda, idProduct=8178
[ 2082.852964] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2082.852966] usb 2-4: Product: USB WLAN
[ 2082.852967] usb 2-4: Manufacturer: Realtek
[ 2082.852969] usb 2-4: SerialNumber: 00e04c000001
[ 2082.853454] Chip version 0x11
[ 2082.929828] Board Type 0
[ 2082.930073] rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 2082.930075] rtlwifi: channel plan 0x0
[ 2082.930076] rtlwifi: bad channel plan 0x0
[ 2082.930077] rtlwifi: country code 11
[ 2082.930116] Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 2082.930261] ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
[ 2083.946827] rtl8192cu 2-4:1.0 wlxf4f26d155816: renamed from wlan0
[ 2083.968348] IPv6: ADDRCONF(NETDEV_UP): wlxf4f26d155816: link is not ready
[ 2083.972550] MAC auto ON okay!
[ 2084.005234] Tx queue select: 0x05
[ 2084.418039] IPv6: ADDRCONF(NETDEV_UP): wlxf4f26d155816: link is not ready
[ 2084.461110] IPv6: ADDRCONF(NETDEV_UP): wlxf4f26d155816: link is not ready
[ 2085.344581] wlxf4f26d155816: authenticate with 14:dd:a9:4b:a3:30
[ 2085.355910] wlxf4f26d155816: send auth to 14:dd:a9:4b:a3:30 (try 1/3)
[ 2085.359877] wlxf4f26d155816: authenticated
[ 2085.360099] wlxf4f26d155816: associating with AP with corrupt probe response
[ 2085.363566] wlxf4f26d155816: associate with 14:dd:a9:4b:a3:30 (try 1/3)
[ 2085.370401] wlxf4f26d155816: RX AssocResp from 14:dd:a9:4b:a3:30 (capab=0x431 status=0 aid=1)
[ 2085.372265] wlxf4f26d155816: associated
[ 2085.372303] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf4f26d155816: link becomes ready
[ 2085.403462] cfg80211: Regulatory domain changed to country: DE
[ 2085.403466] cfg80211:  DFS Master region: ETSI
[ 2085.403467] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2085.403470] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2085.403472] cfg80211:   (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 2085.403474] cfg80211:   (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 2085.403475] cfg80211:   (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[ 2085.403477] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)


dmesg | tail
[ 2085.372265] wlxf4f26d155816: associated
[ 2085.372303] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf4f26d155816: link becomes ready
[ 2085.403462] cfg80211: Regulatory domain changed to country: DE
[ 2085.403466] cfg80211:  DFS Master region: ETSI
[ 2085.403467] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2085.403470] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2085.403472] cfg80211:   (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 2085.403474] cfg80211:   (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 2085.403475] cfg80211:   (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[ 2085.403477] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)




bugra9

Sadece yavaş mı yoksa kopma gibi farklı sorunlar da yaşatıyor mu?

earcome

Alıntı yapılan: bugra9 - 19 Temmuz 2016 - 15:06:36
Sadece yavaş mı yoksa kopma gibi farklı sorunlar da yaşatıyor mu?
Kopma yaşamıyorum sadece hız düşük birde normalde adaptörün ışığı internet trafiğine göre yanıp sönmesi lazım ışık sürekli sabit duruyor

kartal

#3
Hızınızın düşme sebebinin internetten değil de makinanınızdan kaynaklandığına nasıl emin oldunuz?
Bir de hızı ölçmenin en garanti yolu system monitor/task manager i açıp dosya indirirken ölçülen hızı gözlemlemektir
Kablo ile ve kablosuz olarak karşılaştırma şansınız var mı?

earcome

Alıntı yapılan: kartal - 19 Temmuz 2016 - 15:21:10
Hızınızın düşme sebebinin internetten değil de makinanınızdan kaynaklandığına nasıl emin oldunuz?
Bir de hızı ölçmenin en garanti yolu system monitor/task manager i açıp dosya indirirken ölçülen hızı gözlemlemektir
çift işletim sistemi kullanıyorum windows üzerinde 2000kbs hız kullanabiliyorken ubuntu 45kbs civarı gözüküyor çeşitli testler vs. yaptım sonuç aynı sorun internetten kaynaklı değil yani

kartal


mhmtkrktr

Kullandığın kart Linux te sorunlu değil diye biliyorum. Gerçi araştırmadım ama 2 gün önce aynı kartı kullandım bi sorun olmamıştı bende.

2000 ve 45. Peki bu değerleri nasıl ölçüyorsun, önce bunu bilmek gerekir. Torrent uygulaması mı, tarayıcı ile dosya indirirken mi vb. ? Bu şekilde ise, aynı kaynaktan aynı dosyamı?
Biraz daha ayrıntı lütfen.

eronis

Kullandığın bir VPN programı var mı ? Tarayıcında kaç eklenti var ? Tor yada benzeri bir ağ kullanıyor musun ? Hangi sitelere girmeye çalıştın yada ne yavaş indi ?
The Linux philosophy is 'Laugh in the face of danger'. Oops. Wrong One. 'Do it yourself'. Yes, that's it. --Linus Torvalds