Kablosuz bağlantı kopuyor

[ilksumat]

Benimde aynı sorun oluyor. Kodları yapınca:

Kod Seç Genişlet

cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=14.04
DISTRIB_CODENAME=trusty
DISTRIB_DESCRIPTION="Ubuntu 14.04.4 LTS"

Kod Seç Genişlet

cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-3.13.0-87-generic root=UUID=07b5be90-97c7-48a8-8bc7-e5cf22f804eb ro quiet splash vt.handoff=7


Kod Seç Genişlet

uname -a
Linux netbook 3.13.0-87-generic #133-Ubuntu SMP Tue May 24 18:33:01 UTC 2016 i686 i686 i686 GNU/Linux


Kod Seç Genişlet

lspci
00:00.0 Host bridge: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
00:02.1 Display controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
05:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller


Kod Seç Genişlet

lsusb
Bus 001 Device 003: ID 2232:1006 Silicon Motion
Bus 001 Device 004: ID 0781:5567 SanDisk Corp. Cruzer Blade
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


Kod Seç Genişlet

rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: samsung-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no

Kod Seç Genişlet

sudo lshw -C network
[sudo] password for renni:
PCI (sysfs) 

Kod Seç Genişlet

ifconfig
eth0      Link encap:Ethernet  HWaddr e8:11:32:58:db:9c 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:18

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:116230 errors:0 dropped:0 overruns:0 frame:0
          TX packets:116230 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:106643887 (106.6 MB)  TX bytes:106643887 (106.6 MB)

wlan0     Link encap:Ethernet  HWaddr c0:f8:da:4e:5b:ef 
          inet addr:192.168.2.74  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::c2f8:daff:fe4e:5bef/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:284026 errors:0 dropped:0 overruns:0 frame:0
          TX packets:242617 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:307001109 (307.0 MB)  TX bytes:36901021 (36.9 MB)



Kod Seç Genişlet

iwconfig
wlan0     IEEE 802.11bgn  ESSID:"SFR WiFi FON" 
          Mode:Managed  Frequency:2.412 GHz  Access Point: 8A:95:04:BE:61:8D   
          Bit Rate=39 Mb/s   Tx-Power=14 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=43/70  Signal level=-67 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:38  Invalid misc:11213   Missed beacon:0

lo        no wireless extensions.

eth0      no wireless extensions.


Kod Seç Genişlet

iwlist scanning
wlan0     Scan completed :
          Cell 01 - Address: 8A:95:04:BE:61:8D
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    Quality=59/70  Signal level=-51 dBm 
                    Encryption key:off
                    ESSID:"SFR WiFi FON"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=00000610f478a0b4
                    Extra: Last beacon: 76668ms ago
                    IE: Unknown: 000C534652205769466920464F4E
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 030101
                    IE: Unknown: 2A0100
                    IE: Unknown: 2F0100
                    IE: Unknown: 32040C121860
                    IE: Unknown: 2D1AEC181BFFFF000000000000000000000000000000000000000000
                    IE: Unknown: 3D1601001500000000000000000000000000000000000000
                    IE: Unknown: DD090010180201F02C0000
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00

lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.



Kod Seç Genişlet

lsmod
Module                  Size  Used by
nls_iso8859_1          12617  1
usb_storage            48417  1
btrfs                 826892  0
raid6_pq               97455  1 btrfs
xor                    26221  1 btrfs
ufs                    73656  0
qnx4                   13101  0
hfsplus                93447  0
hfs                    49390  0
minix                  31317  0
ntfs                   95723  0
msdos                  17093  0
jfs                   170009  0
xfs                   815321  0
libcrc32c              12543  2 xfs,btrfs
dm_crypt               22589  0
snd_hda_codec_realtek    59527  1
gpio_ich               13229  0
snd_hda_intel          42858  3
snd_hda_codec         168250  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13272  1 snd_hda_codec
snd_pcm                85501  2 snd_hda_codec,snd_hda_intel
samsung_laptop         14062  0
snd_page_alloc         14230  2 snd_pcm,snd_hda_intel
snd_seq_midi           13132  0
uvcvideo               71309  0
snd_seq_midi_event     14475  1 snd_seq_midi
arc4                   12536  2
ath9k                 148698  0
videobuf2_vmalloc      13048  1 uvcvideo
snd_rawmidi            25543  1 snd_seq_midi
ath9k_common           13359  1 ath9k
videobuf2_memops       13170  1 videobuf2_vmalloc
videobuf2_core         39258  1 uvcvideo
ath9k_hw              438205  2 ath9k_common,ath9k
snd_seq                55431  2 snd_seq_midi_event,snd_seq_midi
ath                    23922  3 ath9k_common,ath9k,ath9k_hw
coretemp               13195  0
videodev              108503  2 uvcvideo,videobuf2_core
mac80211              554291  1 ath9k
rfcomm                 53664  0
snd_seq_device         14137  3 snd_seq,snd_rawmidi,snd_seq_midi
bnep                   18895  2
joydev                 17101  0
snd_timer              28569  2 snd_pcm,snd_seq
serio_raw              13230  0
bluetooth             342208  10 bnep,rfcomm
cfg80211              417586  3 ath,ath9k,mac80211
snd                    60939  16 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
lpc_ich                16864  0
shpchp                 32128  0
soundcore              12600  1 snd
binfmt_misc            13140  1
parport_pc             31981  0
mac_hid                13037  0
ppdev                  17391  0
lp                     13299  0
parport                40836  3 lp,ppdev,parport_pc
hid_generic            12492  0
usbhid                 47070  0
hid                    87604  3 hid_generic,usbhid
i915                  710018  3
ahci                   25643  3
sky2                   52946  0
libahci                27214  1 ahci
psmouse                95439  0
i2c_algo_bit           13197  1 i915
drm_kms_helper         48868  1 i915
drm                   244037  4 i915,drm_kms_helper
video                  18903  2 i915,samsung_laptop








Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 10 Haziran 2016 - 16:03:20
bundan sonrakinin yani dmesg'in sonuçlarını tam alamadım nasıl alınır bilmiyorum, çok uzunduda.

Kod Seç Genişlet


[    1.427221] zbud: loaded
[    1.427422] VFS: Disk quotas dquot_6.5.2
[    1.427543] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.428832] fuse init (API version 7.22)
[    1.429049] msgmni has been set to 1738
[    1.429203] Key type big_key registered
[    1.430210] Key type asymmetric registered
[    1.430217] Asymmetric key parser 'x509' registered
[    1.430311] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.430406] io scheduler noop registered
[    1.430414] io scheduler deadline registered (default)
[    1.430488] io scheduler cfq registered
[    1.430862] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    1.430990] pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
[    1.431124] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    1.431354] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    1.431473] pcieport 0000:00:1c.3: enabling device (0000 -> 0003)
[    1.431615] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    1.431777] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.431817] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.431925] vesafb: mode is 800x600x32, linelength=3200, pages=0
[    1.431929] vesafb: scrolling: redraw
[    1.431936] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.432538] vesafb: framebuffer at 0xd0000000, mapped to 0xf8480000, using 1920k, total 1920k
[    1.439288] Console: switching to colour frame buffer device 100x37
[    1.445865] fb0: VESA VGA frame buffer device
[    1.445925] intel_idle: MWAIT substates: 0x20220
[    1.445942] intel_idle: v0.4 model 0x1C
[    1.445947] intel_idle: lapic_timer_reliable_states 0x2
[    1.445952] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[    1.446086] ipmi message handler version 39.2
[    1.446786] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.447179] ACPI: AC Adapter [ADP1] (on-line)
[    1.447525] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    1.447885] ACPI: Lid Switch [LID0]
[    1.448040] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.448054] ACPI: Power Button [PWRB]
[    1.448160] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    1.448169] ACPI: Sleep Button [SLPB]
[    1.448268] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.448277] ACPI: Power Button [PWRF]
[    1.452783] thermal LNXTHERM:00: registered as thermal_zone0
[    1.452790] ACPI: Thermal Zone [TZ00] (39 C)
[    1.452876] GHES: HEST is not enabled!
[    1.453173] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.453822] isapnp: Scanning for PnP cards...
[    1.459007] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.459033] ACPI: Battery Slot [BAT1] (battery present)
[    1.460360] Linux agpgart interface v0.103
[    1.460541] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[    1.460691] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    1.460877] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.461094] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.465811] brd: module loaded
[    1.468311] loop: module loaded
[    1.469660] libphy: Fixed MDIO Bus: probed
[    1.470007] tun: Universal TUN/TAP device driver, 1.6
[    1.470013] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.470140] PPP generic driver version 2.4.2
[    1.470260] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.470274] ehci-pci: EHCI PCI platform driver
[    1.470517] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.470536] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.470564] ehci-pci 0000:00:1d.7: debug port 1
[    1.474488] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    1.474560] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf0604000
[    1.484063] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.484227] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.484236] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.484244] usb usb1: Product: EHCI Host Controller
[    1.484251] usb usb1: Manufacturer: Linux 3.13.0-87-generic ehci_hcd
[    1.484259] usb usb1: SerialNumber: 0000:00:1d.7
[    1.484607] hub 1-0:1.0: USB hub found
[    1.484633] hub 1-0:1.0: 8 ports detected
[    1.485433] ehci-platform: EHCI generic platform driver
[    1.485471] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.485477] ohci-pci: OHCI PCI platform driver
[    1.485512] ohci-platform: OHCI generic platform driver
[    1.485540] uhci_hcd: USB Universal Host Controller Interface driver
[    1.485734] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.485753] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.485801] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    1.485962] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.485971] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.485979] usb usb2: Product: UHCI Host Controller
[    1.485986] usb usb2: Manufacturer: Linux 3.13.0-87-generic uhci_hcd
[    1.485993] usb usb2: SerialNumber: 0000:00:1d.0
[    1.486344] hub 2-0:1.0: USB hub found
[    1.486369] hub 2-0:1.0: 2 ports detected
[    1.486787] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.486805] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.486872] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    1.487025] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.487034] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.487042] usb usb3: Product: UHCI Host Controller
[    1.487049] usb usb3: Manufacturer: Linux 3.13.0-87-generic uhci_hcd
[    1.487057] usb usb3: SerialNumber: 0000:00:1d.1
[    1.487373] hub 3-0:1.0: USB hub found
[    1.487403] hub 3-0:1.0: 2 ports detected
[    1.487817] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.487834] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.487902] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    1.488103] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.488112] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.488120] usb usb4: Product: UHCI Host Controller
[    1.488128] usb usb4: Manufacturer: Linux 3.13.0-87-generic uhci_hcd
[    1.488135] usb usb4: SerialNumber: 0000:00:1d.2
[    1.488451] hub 4-0:1.0: USB hub found
[    1.488477] hub 4-0:1.0: 2 ports detected
[    1.488901] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.488919] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.488983] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    1.489137] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.489146] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.489154] usb usb5: Product: UHCI Host Controller
[    1.489161] usb usb5: Manufacturer: Linux 3.13.0-87-generic uhci_hcd
[    1.489168] usb usb5: SerialNumber: 0000:00:1d.3
[    1.489483] hub 5-0:1.0: USB hub found
[    1.489508] hub 5-0:1.0: 2 ports detected
[    1.489992] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.493888] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.493907] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.494256] mousedev: PS/2 mouse device common for all mice
[    1.495029] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.495079] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.495307] device-mapper: uevent: version 1.0.3
[    1.495514] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.495579] platform eisa.0: Probing EISA bus 0
[    1.495589] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.495597] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.495605] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.495612] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.495620] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.495627] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.495635] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.495642] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.495650] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.495657] platform eisa.0: EISA: Detected 0 cards
[    1.495674] cpufreq-nforce2: No nForce2 chipset.
[    1.495684] ledtrig-cpu: registered to indicate activity on CPUs
[    1.496145] TCP: cubic registered
[    1.496444] NET: Registered protocol family 10
[    1.496957] NET: Registered protocol family 17
[    1.496988] Key type dns_resolver registered
[    1.497466] Using IPI No-Shortcut mode
[    1.497707] Loading compiled-in X.509 certificates
[    1.510583] Loaded X.509 cert 'Magrathea: Glacier signing key: c5292ebbb8547e71e0ae1d7dcd1f536aa4d29693'
[    1.510623] registered taskstats version 1
[    1.517427] Key type trusted registered
[    1.528599] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.531412] Key type encrypted registered
[    1.531426] AppArmor: AppArmor sha1 policy hashing enabled
[    1.531433] IMA: No TPM chip found, activating TPM-bypass!
[    1.532211] regulator-dummy: disabling
[    1.532359]   Magic number: 4:896:63
[    1.532518] rtc_cmos 00:03: setting system clock to 2016-06-10 06:04:55 UTC (1465538695)
[    1.533490] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.533496] EDD information not available.
[    1.533616] PM: Hibernation image not present or could not be loaded.
[    1.764510] isapnp: No Plug & Play device found
[    1.765199] Freeing unused kernel memory: 884K (c19c7000 - c1aa4000)
[    1.765336] Write protecting the kernel text: 6580k
[    1.765506] Write protecting the kernel read-only data: 2784k
[    1.765511] NX-protecting the kernel data: 5708k
[    1.803099] systemd-udevd[99]: starting version 204
[    1.954474] [drm] Initialized drm 1.1.0 20060810
[    2.026192] sky2: driver version 1.30
[    2.026652] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
[    2.035106] sky2 0000:09:00.0: irq 44 for MSI/MSI-X
[    2.037224] sky2 0000:09:00.0 eth0: addr e8:11:32:58:db:9c
[    2.064759] ahci 0000:00:1f.2: version 3.0
[    2.065022] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    2.065176] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    2.065189] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[    2.127337] scsi0 : ahci
[    2.132117] scsi1 : ahci
[    2.136083] scsi2 : ahci
[    2.141749] scsi3 : ahci
[    2.141972] ata1: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604500 irq 45
[    2.141986] ata2: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604580 irq 45
[    2.141996] ata3: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604600 irq 45
[    2.142005] ata4: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604680 irq 45
[    2.143528] [drm] Memory usable by graphics device = 512M
[    2.143542] checking generic (d0000000 1e0000) vs hw (d0000000 10000000)
[    2.143549] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    2.143594] Console: switching to colour dummy device 80x25
[    2.168199] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[    2.168234] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.168241] [drm] Driver supports precise vblank timestamp query.
[    2.168382] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.196074] usb 1-8: new high-speed USB device number 3 using ehci-pci
[    2.259115] [drm] initialized overlay support
[    2.281812] fbcon: inteldrmfb (fb0) is primary device
[    2.332416] usb 1-8: New USB device found, idVendor=2232, idProduct=1006
[    2.332423] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.332430] usb 1-8: Product: WebCam SCB-0355N
[    2.332435] usb 1-8: Manufacturer: Image Processor
[    2.456121] ata3: SATA link down (SStatus 0 SControl 300)
[    2.460096] ata4: SATA link down (SStatus 0 SControl 300)
[    2.460143] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.460177] ata2: SATA link down (SStatus 0 SControl 300)
[    2.461318] ata1.00: ATA-8: WDC WD2500BEVT-35A23T0, 01.01A01, max UDMA/133
[    2.461326] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.462686] ata1.00: configured for UDMA/133
[    2.463031] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVT-3 01.0 PQ: 0 ANSI: 5
[    2.463561] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.463587] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.463780] sd 0:0:0:0: [sda] Write Protect is off
[    2.463788] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.463902] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.570157]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    2.571612] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.572066] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[    2.752931] usb 2-1: New USB device found, idVendor=046d, idProduct=c52f
[    2.752939] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.752945] usb 2-1: Product: USB Receiver
[    2.752951] usb 2-1: Manufacturer: Logitech
[    2.795114] hidraw: raw HID events driver (C) Jiri Kosina
[    2.809354] psmouse serio1: synaptics: queried max coordinates: x [..5806], y [..4906]
[    2.826409] usbcore: registered new interface driver usbhid
[    2.826411] usbhid: USB HID core driver
[    2.846692] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7
[    2.849928] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
[    2.855225] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input8
[    2.855812] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
[    2.898329] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0000, board id: 0, fw id: 597434
[    2.940073] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    3.040130] Console: switching to colour frame buffer device 128x37
[    3.048721] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.048727] i915 0000:00:02.0: registered panic notifier
[    3.049339] ACPI: Video Device [IGD0] (multi-head: yes  rom: no  post: no)
[    3.050874] acpi device:04: registered as cooling_device2
[    3.051110] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    3.051388] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    5.715846] random: nonblocking pool is initialized
[    6.265920] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   18.970671] Adding 1036284k swap on /dev/sda6.  Priority:-1 extents:1 across:1036284k FS
[   18.979848] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   19.188323] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.601700] systemd-udevd[331]: starting version 204
[   20.246992] lp: driver loaded but no devices found
[   20.348518] ppdev: user-space parallel port driver
[   20.857577] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   21.136360] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   21.136383] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.PCI0.LPC0.PMIO 2 (20131115/utaddress-251)
[   21.136398] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.136409] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \_SB_.PCI0.LPC0.GPOX 1 (20131115/utaddress-251)
[   21.136423] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.136526] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   21.657175] type=1400 audit(1465538715.620:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=439 comm="apparmor_parser"
[   21.657199] type=1400 audit(1465538715.620:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=439 comm="apparmor_parser"
[   21.659163] type=1400 audit(1465538715.620:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=439 comm="apparmor_parser"
[   22.015367] Bluetooth: Core ver 2.17
[   22.015458] NET: Registered protocol family 31
[   22.015466] Bluetooth: HCI device and connection manager initialized
[   22.015485] Bluetooth: HCI socket layer initialized
[   22.015496] Bluetooth: L2CAP socket layer initialized
[   22.015517] Bluetooth: SCO socket layer initialized
[   22.191115] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.191126] Bluetooth: BNEP filters: protocol multicast
[   22.191148] Bluetooth: BNEP socket layer initialized
[   22.193940] cfg80211: Calling CRDA to update world regulatory domain
[   22.216256] Bluetooth: RFCOMM TTY layer initialized
[   22.216282] Bluetooth: RFCOMM socket layer initialized
[   22.216304] Bluetooth: RFCOMM ver 1.11
[   22.581679] Linux video capture interface: v2.00
[   22.665987] init: cups main process (444) killed by HUP signal
[   22.666038] init: cups main process ended, respawning
[   22.957931] type=1400 audit(1465538716.920:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=497 comm="apparmor_parser"
[   22.957961] type=1400 audit(1465538716.920:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=497 comm="apparmor_parser"
[   22.957981] type=1400 audit(1465538716.920:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=497 comm="apparmor_parser"
[   22.959967] type=1400 audit(1465538716.920:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=497 comm="apparmor_parser"
[   22.959994] type=1400 audit(1465538716.920:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=497 comm="apparmor_parser"
[   22.964803] type=1400 audit(1465538716.928:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=497 comm="apparmor_parser"
[   23.344679] ath: phy0: Enable LNA combining
[   23.366570] ath: phy0: ASPM enabled: 0x42
[   23.366584] ath: EEPROM regdomain: 0x65
[   23.366589] ath: EEPROM indicates we should expect a direct regpair map
[   23.366597] ath: Country alpha2 being used: 00
[   23.366601] ath: Regpair used: 0x65
[   23.604597] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   23.616661] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf85a0000, irq=16
[   23.698309] uvcvideo: Found UVC 1.00 device WebCam SCB-0355N (2232:1006)
[   23.856427] input: WebCam SCB-0355N as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input10
[   23.857807] usbcore: registered new interface driver uvcvideo
[   23.857816] USB Video Class driver (1.1.1)
[   23.974369] samsung_laptop: Disabling ACPI video driver
[   24.074646] samsung_laptop: enabled workaround for brightness stepping quirk
[   24.178074] samsung_laptop: detected SABI interface: SwSmi@
[   25.075106] init: failsafe main process (542) killed by TERM signal
[   25.490049] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[   25.724324] SKU: Nid=0x1d sku_cfg=0x40038205
[   25.724333] SKU: port_connectivity=0x1
[   25.724339] SKU: enable_pcbeep=0x0
[   25.724345] SKU: check_sum=0x00000003
[   25.724350] SKU: customization=0x00000082
[   25.724355] SKU: external_amp=0x0
[   25.724361] SKU: platform_type=0x1
[   25.724366] SKU: swap=0x0
[   25.724371] SKU: override=0x1
[   25.724715] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   25.724723]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   25.724731]    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   25.724736]    mono: mono_out=0x0
[   25.724741]    inputs:
[   25.724749]      Internal Mic=0x19
[   25.724757]      Mic=0x18
[   25.724764] realtek: No valid SSID, checking pincfg 0x40038205 for NID 0x1d
[   25.724771] realtek: Enabling init ASM_ID=0x8205 CODEC_ID=10ec0269
[   25.765170] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   25.769171] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   25.934353] cfg80211: World regulatory domain updated:
[   25.934363] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   25.934371] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.934378] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.934385] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.934391] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.934398] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.034452] type=1400 audit(1465538720.996:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/share/gdm/guest-session/Xsession" pid=743 comm="apparmor_parser"
[   27.046970] type=1400 audit(1465538721.008:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=744 comm="apparmor_parser"
[   27.046997] type=1400 audit(1465538721.008:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=744 comm="apparmor_parser"
[   27.063531] type=1400 audit(1465538721.024:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=744 comm="apparmor_parser"
[   27.098393] type=1400 audit(1465538721.060:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=745 comm="apparmor_parser"
[   27.098424] type=1400 audit(1465538721.060:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=745 comm="apparmor_parser"
[   27.098447] type=1400 audit(1465538721.060:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=745 comm="apparmor_parser"
[   27.112754] type=1400 audit(1465538721.076:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=745 comm="apparmor_parser"
[   27.112784] type=1400 audit(1465538721.076:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=745 comm="apparmor_parser"
[   27.113743] type=1400 audit(1465538721.076:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=745 comm="apparmor_parser"
[   31.810151] init: gdm main process (899) killed by TERM signal
[   34.386544] init: plymouth-upstart-bridge main process ended, respawning
[   34.474989] init: plymouth-upstart-bridge main process (1140) terminated with status 1
[   34.475053] init: plymouth-upstart-bridge main process ended, respawning
[   52.073746] audit_printk_skb: 126 callbacks suppressed
[   52.073756] type=1400 audit(1465538746.036:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1517 comm="apparmor_parser"
[   52.073775] type=1400 audit(1465538746.036:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1517 comm="apparmor_parser"
[   52.075109] type=1400 audit(1465538746.036:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1517 comm="apparmor_parser"
[  110.401232] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  110.411749] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  110.424325] sky2 0000:09:00.0 eth0: enabling interface
[  110.424974] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  110.434870] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  111.691000] wlan0: authenticate with 8a:95:04:be:61:8d
[  111.711448] wlan0: send auth to 8a:95:04:be:61:8d (try 1/3)
[  111.715257] wlan0: authenticated
[  111.716305] wlan0: associate with 8a:95:04:be:61:8d (try 1/3)
[  111.724086] wlan0: RX AssocResp from 8a:95:04:be:61:8d (capab=0x401 status=0 aid=1)
[  111.724208] wlan0: associated
[  111.724315] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  136.917519] perf samples too long (2516 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[  305.177434] perf samples too long (5014 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[ 1301.066876] init: cups main process (1518) killed by KILL signal
[ 1303.819209] type=1400 audit(1465539997.783:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2858 comm="apparmor_parser"
[ 1303.819243] type=1400 audit(1465539997.783:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2858 comm="apparmor_parser"
[ 1303.821191] type=1400 audit(1465539997.787:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2858 comm="apparmor_parser"
[ 2223.817625] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 2223.968723] JFS: nTxBlock = 7933, nTxLock = 63465
[ 2224.210951] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 2224.509895] QNX4 filesystem 0.2.3 registered.
[ 2224.763547] xor: measuring software checksum speed
[ 2224.800046]    pIII_sse  :  3848.000 MB/sec
[ 2224.840041]    prefetch64-sse:  4254.000 MB/sec
[ 2224.840053] xor: using function: prefetch64-sse (4254.000 MB/sec)
[ 2224.968136] raid6: mmxx1      336 MB/s
[ 2225.036149] raid6: mmxx2      584 MB/s
[ 2225.104865] raid6: sse1x1      53 MB/s
[ 2225.172735] raid6: sse1x2     105 MB/s
[ 2225.240648] raid6: sse2x1     104 MB/s
[ 2225.308177] raid6: sse2x2     206 MB/s
[ 2225.376425] raid6: int32x1    146 MB/s
[ 2225.444350] raid6: int32x2    195 MB/s
[ 2225.512253] raid6: int32x4    195 MB/s
[ 2225.580166] raid6: int32x8    209 MB/s
[ 2225.580176] raid6: using algorithm mmxx2 (584 MB/s)
[ 2225.580183] raid6: using ssse3x1 recovery algorithm
[ 2225.806633] bio: create slab <bio-1> at 1
[ 2225.816625] Btrfs loaded
[ 3132.952159] usb 1-3: new high-speed USB device number 4 using ehci-pci
[ 3133.085015] usb 1-3: New USB device found, idVendor=0781, idProduct=5567
[ 3133.085031] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3133.085042] usb 1-3: Product: Cruzer Blade
[ 3133.085052] usb 1-3: Manufacturer: SanDisk
[ 3133.085061] usb 1-3: SerialNumber: 2006087660029100AB88
[ 3134.061562] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 3134.061802] scsi4 : usb-storage 1-3:1.0
[ 3134.062100] usbcore: registered new interface driver usb-storage
[ 3135.061616] scsi 4:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.26 PQ: 0 ANSI: 5
[ 3135.065013] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 3135.066965] sd 4:0:0:0: [sdb] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
[ 3135.069324] sd 4:0:0:0: [sdb] Write Protect is off
[ 3135.069339] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 3135.070573] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3135.094329]  sdb: sdb1
[ 3135.097938] sd 4:0:0:0: [sdb] Attached SCSI removable disk

Kod Seç Genişlet

dmesg | tail
[ 3134.061802] scsi4 : usb-storage 1-3:1.0
[ 3134.062100] usbcore: registered new interface driver usb-storage
[ 3135.061616] scsi 4:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.26 PQ: 0 ANSI: 5
[ 3135.065013] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 3135.066965] sd 4:0:0:0: [sdb] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
[ 3135.069324] sd 4:0:0:0: [sdb] Write Protect is off
[ 3135.069339] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 3135.070573] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3135.094329]  sdb: sdb1
[ 3135.097938] sd 4:0:0:0: [sdb] Attached SCSI removable disk




Teşekkürler şimdden.

[Source]

Kod Seç Genişlet

echo "options asus_nb_wmi wapf=1" > /etc/modprobe.d/asus.conf

Yukarıdaki komutu denermisin aynı sorunu yaşayacakmısın.

[ilksumat]

Şöyle bir çıktısı var:

Kod Seç Genişlet


sudo echo "options asus_nb_wmi wapf=1" > /etc/modprobe.d/asus.conf
bash: /etc/modprobe.d/asus.conf: Permission denied

[heartsmagic]

@Faker, not düşmüş ve sorunu anlamış olalım echo ile sudo o şekilde çalışmıyor. Şu şekilde kullanıyoruz çalışması için aklında olsun:

Kod Seç Genişlet

echo "falanca" | sudo tee -a /falanca/dosya

-a ekler, eğer -a kullanılmazsa dosya sıfırlanır.

Burada sorun bu şekilde çözülmeyebilir ama, zira modüller arasında options asus_nb_wmi yok.

@sumatilk, Atheros kartlar genelde sorunsuz oluyor. Çok sık söylüyorum bunu forumda ama cidden öyle. Kendim de çok benzer bir karta sahibim. Etrafta da fazlaca Atheros sıkıntısına rastlamıyoruz. Modeme çok mu uzaksın?

[ilksumat]

Uzak derken? Değilim, aynı mekanda modem.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 11 Haziran 2016 - 10:58:16
Peki yukardaki çıktı meselesini ne yapayım?

[Source]

@Faker, not düşmüş ve sorunu anlamış olalım echo ile sudo o şekilde çalışmıyor. Şu şekilde kullanıyoruz çalışması için aklında olsun:

Kod Seç Genişlet

echo "falanca" | sudo tee -a /falanca/dosya

-a ekler, eğer -a kullanılmazsa dosya sıfırlanır.

Burada sorun bu şekilde çözülmeyebilir ama, zira modüller arasında options asus_nb_wmi yok.

@sumatilk, Atheros kartlar genelde sorunsuz oluyor. Çok sık söylüyorum bunu forumda ama cidden öyle. Kendim de çok benzer bir karta sahibim. Etrafta da fazlaca Atheros sıkıntısına rastlamıyoruz. Modeme çok mu uzaksın?

Teşekkür ederim düzeltmen için karışıklık olmasın diye bende mesajımı düzenledim.

[ilksumat]

Ben düzenlenmiş halinin çıktısını alayım o zaman dedim. Ama yine böyle çıktı:

Kod Seç Genişlet

echo "options asus_nb_wmi wapf=1" > /etc/modprobe.d/asus.conf
bash: /etc/modprobe.d/asus.conf: Permission denied

[Source]

Şu komutu yazıp yeniden başlatıp denermisin.Aşağıdaki komut ile sorunu çözenler olmuş.

Kod Seç Genişlet

echo "options asus_nb_wmi wapf=1" | sudo tee /etc/modprobe.d/asus.conf

[ilksumat]

Yazdım, şu çıktı:

Kod Seç Genişlet


options asus_nb_wmi wapf=1

[Source]

Sistemi yeniden başlattın ve hala kopmalar yaşıyormusun?

[ilksumat]

Yeniden başlatmamıştım, başlatayım


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 11 Haziran 2016 - 15:32:43
Evet yeniden başlattım. Teşekkürler, gelişmeleri yazarım.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 12 Haziran 2016 - 01:12:17
Merhaba, tekrar koptu.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 12 Haziran 2016 - 12:42:02
Merhaba dün tekrar koptuğunda yazmıştım ama görünmüyor, belli olsun diye tekrar yazayım dedim.

[heartsmagic]

Dediğim gibi o modül zaten kullanılmıyor.
@sumatilk, modeme yakınsın yani? Kotpuktan hemen sonra şu çıktıyı aktarır mısın buraya?

Kod Seç Genişlet

dmesg | tail

[ilksumat]

Kopup tekrardan bağlandıktan biraz sonra oldu ama yine de yaptım, aktarıyorum:

Kod Seç Genişlet

[10954.645025] scsi5 : usb-storage 1-3:1.0
[10955.645305] scsi 5:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.26 PQ: 0 ANSI: 5
[10955.647537] sd 5:0:0:0: [sdb] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
[10955.649159] sd 5:0:0:0: [sdb] Write Protect is off
[10955.649169] sd 5:0:0:0: Attached scsi generic sg1 type 0
[10955.649173] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
[10955.650320] sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[10955.668708]  sdb: sdb1
[10955.674551] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[10956.716781] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.



Bir de masaüstünün sol tarafındaki yer çubukları var ya, hani yukardan aşağı mozilladır, çöptür, falan. Onlardan search your computer and online resources tıklayıp açıldığında bir sürü şey çıkıyor, hava durumu, reklamlar, hava durumu falan... Onlara ne gerek var bilemiyorum. Mesela en üste terminal yazıp açtıracam, ter yazınca bile bir sürü ne alaka şeyler geliyor, ne yapabilirim, bunu başka yerden sorsam?

Teşekkürler tekrar.

[heartsmagic]

Yakalayamamışız, şöyle deneyelim.

Kod Seç Genişlet

dmesg > dmesg_dosya

komutunu ver. Başlangıç dizininde dmesg_dosya isimli bir dosya olacak, onun içeriğini buraya aktar lütfen.

[ilksumat]

Merhaba komutu verdim bir şey çıkmadı.

[mhmtkrktr]

dmesg > dmesg_dosya

Merhaba komutu verdim bir şey çıkmadı.

Bu komut uçbirimde çıktı oluşturmayacak. Mesajda belirtildiği üzere /home dizini altında bir dosyaya yazacak üretilen çıktıyı. İstenilen komutu verip şu şekilde dene.

Kod Seç Genişlet

gedit ~/dmesg_dosya

İçeriği olan bir dosya açılırsa onu paylaşırsın.

[ilksumat]

Çıktısı şöyle:

Kod Seç Genişlet




[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-88-generic (buildd@lgw01-15) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #135-Ubuntu SMP Wed Jun 8 21:10:37 UTC 2016 (Ubuntu 3.13.0-88.135-generic 3.13.11-ckt39)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f5affff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f5b0000-0x000000003f5bffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003f5c0000-0x000000003f5c2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f5c3000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. N250P                      /N250P                      , BIOS 01HG.M011.20101209.RHU 12/09/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3f5b0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 0C0000000 write-back
[    0.000000]   1 base 03F600000 mask 0FFE00000 uncachable
[    0.000000]   2 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 1GB, type WB
[    0.000000] reg 1, base: 1014MB, range: 2MB, type UC
[    0.000000] reg 2, base: 1016MB, range: 8MB, type UC
[    0.000000] total RAM covered: 1014M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 16M num_reg: 3  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 1GB, type WB
[    0.000000] reg 1, base: 1014MB, range: 2MB, type UC
[    0.000000] reg 2, base: 1016MB, range: 8MB, type UC
[    0.000000] found SMP MP-table at [mem 0x000f7d30-0x000f7d3f] mapped at [c00f7d30]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[    0.000000]  [mem 0x37800000-0x379fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[    0.000000]  [mem 0x34000000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] BRK [0x01ba4000, 0x01ba4fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x34d82000-0x366b8fff]
[    0.000000] ACPI: RSDP 000f7d00 000024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 3f5b82ef 00007C (v01 SECCSD LH43STAR 06040000  LTP 00000000)
[    0.000000] ACPI: FACP 3f5bfc92 0000F4 (v03 INTEL           06040000 PTL  00000002)
[    0.000000] ACPI: DSDT 3f5b9e9e 005D00 (v01  INTEL BEARG31A 06040000 MSFT 03000001)
[    0.000000] ACPI: FACS 3f5c2fc0 000040
[    0.000000] ACPI: MCFG 3f5bfd86 00003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
[    0.000000] ACPI: HPET 3f5bfdc2 000038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
[    0.000000] ACPI: APIC 3f5bfdfa 000068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 3f5bfe62 000028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SLIC 3f5bfe8a 000176 (v01 SECCSD LH43STAR 06040000  LTP 00000000)
[    0.000000] ACPI: SSDT 3f5b8f29 00025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 3f5b8e83 0000A6 (v01  PmRef  Cpu3Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 3f5b8ddd 0000A6 (v01  PmRef  Cpu2Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 3f5b8d37 0000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 3f5b836b 0009CC (v02  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 121MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] BRK [0x01ba5000, 0x01ba5fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0x3f5affff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x3f5affff]
[    0.000000] On node 0 totalpages: 259404
[    0.000000] free_area_init_node: node 0, pgdat c19a9840, node_mem_map f740e020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 244 pages used for memmap
[    0.000000]   HighMem zone: 31154 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x000ce000-0x000cffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000dbfff]
[    0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f73ec000 s35520 r0 d21824 u57344
[    0.000000] pcpu-alloc: s35520 r0 d21824 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257620
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-88-generic root=UUID=07b5be90-97c7-48a8-8bc7-e5cf22f804eb ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2076024 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0003f5b0)
[    0.000000] Memory: 988704K/1037616K available (6578K kernel code, 645K rwdata, 2776K rodata, 884K init, 924K bss, 48912K reserved, 124616K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc19c7000 - 0xc1aa4000   ( 884 kB)
[    0.000000]       .data : 0xc166ceca - 0xc19c6700   (3430 kB)
[    0.000000]       .text : 0xc1000000 - 0xc166ceca   (6579 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1662.483 MHz processor
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.96 BogoMIPS (lpj=6649932)
[    0.004013] pid_max: default: 32768 minimum: 301
[    0.004089] Security Framework initialized
[    0.004119] AppArmor: AppArmor initialized
[    0.004123] Yama: becoming mindful.
[    0.004235] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.004242] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.004670] Initializing cgroup subsys memory
[    0.004685] Initializing cgroup subsys devices
[    0.004691] Initializing cgroup subsys freezer
[    0.004696] Initializing cgroup subsys blkio
[    0.004701] Initializing cgroup subsys perf_event
[    0.004709] Initializing cgroup subsys hugetlb
[    0.004759] CPU: Physical Processor ID: 0
[    0.004764] CPU: Processor Core ID: 0
[    0.004770] mce: CPU supports 5 MCE banks
[    0.004784] CPU0: Thermal monitoring handled by SMI
[    0.004792] process: using mwait in idle threads
[    0.004811] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.004811] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
[    0.004811] tlb_flushall_shift: 6
[    0.005270] Freeing SMP alternatives memory: 32K (c1aa4000 - c1aac000)
[    0.008874] ACPI: Core revision 20131115
[    0.018540] ACPI: All ACPI Tables successfully acquired
[    0.020014] ftrace: allocating 27902 entries in 55 pages
[    0.040168] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.040676] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.087851] smpboot: CPU0: Intel(R) Atom(TM) CPU N455   @ 1.66GHz (fam: 06, model: 1c, stepping: 0a)
[    0.088000] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
[    0.088000] ... version:                3
[    0.088000] ... bit width:              40
[    0.088000] ... generic registers:      2
[    0.088000] ... value mask:             000000ffffffffff
[    0.088000] ... max period:             000000007fffffff
[    0.088000] ... fixed-purpose events:   3
[    0.088000] ... event mask:             0000000700000003
[    0.088576] CPU 1 irqstacks, hard=f6cec000 soft=f6cee000
[    0.088583] x86: Booting SMP configuration:
[    0.008000] Initializing CPU#1
[    0.008000] CPU0: Thermal monitoring enabled (TM1)
[    0.088587] .... node  #0, CPUs:      #1
[    0.100114] x86: Booted up 1 node, 2 CPUs
[    0.100126] smpboot: Total of 2 processors activated (6649.93 BogoMIPS)
[    0.100265] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.100959] devtmpfs: initialized
[    0.100959] EVM: security.selinux
[    0.100959] EVM: security.SMACK64
[    0.100959] EVM: security.ima
[    0.100959] EVM: security.capability
[    0.100959] PM: Registering ACPI NVS region [mem 0x3f5c0000-0x3f5c2fff] (12288 bytes)
[    0.104812] pinctrl core: initialized pinctrl subsystem
[    0.104996] regulator-dummy: no parameters
[    0.105053] RTC time:  9:36:12, date: 06/17/16
[    0.105152] NET: Registered protocol family 16
[    0.105508] EISA bus registered
[    0.105514] cpuidle: using governor ladder
[    0.105519] cpuidle: using governor menu
[    0.105672] ACPI: bus type PCI registered
[    0.105679] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.105841] PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xe0000000-0xe10fffff] (base 0xe0000000)
[    0.105849] PCI: MMCONFIG at [mem 0xe0000000-0xe10fffff] reserved in E820
[    0.105853] PCI: Using MMCONFIG for extended config space
[    0.105857] PCI: Using configuration type 1 for base access
[    0.108571] bio: create slab <bio-0> at 0
[    0.108571] ACPI: Added _OSI(Module Device)
[    0.108571] ACPI: Added _OSI(Processor Device)
[    0.108571] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.108571] ACPI: Added _OSI(Processor Aggregator Device)
[    0.121752] ACPI: SSDT 3f5b9a1f 000203 (v02  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.122328] ACPI: Dynamic OEM Table Load:
[    0.122335] ACPI: SSDT   (null) 000203 (v02  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.122678] ACPI: SSDT 3f5b9188 000708 (v02  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.123210] ACPI: Dynamic OEM Table Load:
[    0.123216] ACPI: SSDT   (null) 000708 (v02  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.124165] ACPI: SSDT 3f5b9c22 0000D4 (v02  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.124719] ACPI: Dynamic OEM Table Load:
[    0.124726] ACPI: SSDT   (null) 0000D4 (v02  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.124912] ACPI: SSDT 3f5b9890 000085 (v02  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.125448] ACPI: Dynamic OEM Table Load:
[    0.125455] ACPI: SSDT   (null) 000085 (v02  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.126082] ACPI: Interpreter enabled
[    0.126082] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.126082] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.126082] ACPI: (supports S0 S3 S4 S5)
[    0.126082] ACPI: Using IOAPIC for interrupt routing
[    0.126082] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.126082] ACPI: No dock devices found.
[    0.142620] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.142636] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.142784] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dsfield-211)
[    0.142798] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c22e88), AE_ALREADY_EXISTS (20131115/psparse-536)
[    0.142815] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[    0.142829] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
[    0.146110] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-10] only partially covers this bridge
[    0.146454] PCI host bridge to bus 0000:00
[    0.146464] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.146471] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.146478] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.146484] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.146490] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.146497] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.146503] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.146510] pci_bus 0000:00: root bus resource [mem 0x40000000-0xf7ffffff]
[    0.146516] pci_bus 0000:00: root bus resource [io  0x0d00-0xfdff]
[    0.146535] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
[    0.146725] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
[    0.146745] pci 0000:00:02.0: reg 0x10: [mem 0xf0300000-0xf037ffff]
[    0.146756] pci 0000:00:02.0: reg 0x14: [io  0x18d0-0x18d7]
[    0.146767] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[    0.146778] pci 0000:00:02.0: reg 0x1c: [mem 0xf0000000-0xf00fffff]
[    0.146955] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
[    0.146971] pci 0000:00:02.1: reg 0x10: [mem 0xf0380000-0xf03fffff]
[    0.147216] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.147248] pci 0000:00:1b.0: reg 0x10: [mem 0xf0400000-0xf0403fff 64bit]
[    0.147370] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.147541] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.147665] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.147776] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.147867] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.147981] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.148100] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.148192] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.148323] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.148429] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.148515] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.148629] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.148735] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.148829] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.148896] pci 0000:00:1d.0: reg 0x20: [io  0x1820-0x183f]
[    0.149082] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.149149] pci 0000:00:1d.1: reg 0x20: [io  0x1840-0x185f]
[    0.149332] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.149398] pci 0000:00:1d.2: reg 0x20: [io  0x1860-0x187f]
[    0.149580] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.149646] pci 0000:00:1d.3: reg 0x20: [io  0x1880-0x189f]
[    0.149847] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.149880] pci 0000:00:1d.7: reg 0x10: [mem 0xf0604000-0xf06043ff]
[    0.150002] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.150178] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.150352] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.150442] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.150558] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[    0.150760] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.150792] pci 0000:00:1f.2: reg 0x10: [io  0x18e8-0x18ef]
[    0.150809] pci 0000:00:1f.2: reg 0x14: [io  0x18dc-0x18df]
[    0.150826] pci 0000:00:1f.2: reg 0x18: [io  0x18e0-0x18e7]
[    0.150843] pci 0000:00:1f.2: reg 0x1c: [io  0x18d8-0x18db]
[    0.150860] pci 0000:00:1f.2: reg 0x20: [io  0x18c0-0x18cf]
[    0.150877] pci 0000:00:1f.2: reg 0x24: [mem 0xf0604400-0xf06047ff]
[    0.150942] pci 0000:00:1f.2: PME# supported from D3hot
[    0.151113] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.151192] pci 0000:00:1f.3: reg 0x20: [io  0x18a0-0x18bf]
[    0.151563] pci 0000:05:00.0: [168c:002b] type 00 class 0x028000
[    0.151604] pci 0000:05:00.0: reg 0x10: [mem 0xf0100000-0xf010ffff 64bit]
[    0.151762] pci 0000:05:00.0: supports D1
[    0.151768] pci 0000:05:00.0: PME# supported from D0 D1 D3hot
[    0.156047] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    0.156069] pci 0000:00:1c.0:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.156265] pci 0000:00:1c.1: PCI bridge to [bus 07]
[    0.156277] pci 0000:00:1c.1:   bridge window [io  0x0000-0x0fff]
[    0.156660] pci 0000:09:00.0: [11ab:4354] type 00 class 0x020000
[    0.156848] pci 0000:09:00.0: reg 0x10: [mem 0xf0200000-0xf0203fff 64bit]
[    0.156952] pci 0000:09:00.0: reg 0x18: [io  0x2000-0x20ff]
[    0.157775] pci 0000:09:00.0: supports D1 D2
[    0.157781] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.158180] pci 0000:00:1c.2: PCI bridge to [bus 09]
[    0.158190] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.158199] pci 0000:00:1c.2:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.158360] pci 0000:00:1c.3: PCI bridge to [bus 0b]
[    0.158371] pci 0000:00:1c.3:   bridge window [io  0x0000-0x0fff]
[    0.158512] pci 0000:00:1e.0: PCI bridge to [bus 11] (subtractive decode)
[    0.158531] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.158538] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.158544] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.158551] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.158557] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.158563] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.158570] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xf7ffffff] (subtractive decode)
[    0.158576] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xfdff] (subtractive decode)
[    0.158641] pci_bus 0000:00: on NUMA node 0
[    0.156391] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.156559] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.156720] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.156878] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.157045] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.157214] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.157382] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.157548] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.160211] ACPI: Enabled 7 GPEs in block 00 to 1F
[    0.160232] ACPI: \_SB_.PCI0: notify handler is installed
[    0.160330] Found 1 acpi root devices
[    0.160459] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.160481] ACPI : EC: 0 stale EC events cleared
[    0.160481] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.160481] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.160481] vgaarb: loaded
[    0.160481] vgaarb: bridge control possible 0000:00:02.0
[    0.160588] SCSI subsystem initialized
[    0.160635] libata version 3.00 loaded.
[    0.160635] ACPI: bus type USB registered
[    0.160635] usbcore: registered new interface driver usbfs
[    0.160635] usbcore: registered new interface driver hub
[    0.160635] usbcore: registered new device driver usb
[    0.160635] PCI: Using ACPI for IRQ routing
[    0.164245] PCI: pci_cache_line_size set to 64 bytes
[    0.164371] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.164377] e820: reserve RAM buffer [mem 0x3f5b0000-0x3fffffff]
[    0.164618] NetLabel: Initializing
[    0.164624] NetLabel:  domain hash size = 128
[    0.164627] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.164657] NetLabel:  unlabeled traffic allowed by default
[    0.164699] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.164699] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.164699] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.166235] Switched to clocksource hpet
[    0.179007] AppArmor: AppArmor Filesystem Enabled
[    0.179079] pnp: PnP ACPI init
[    0.179116] ACPI: bus type PNP registered
[    0.179944] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.179963] system 00:00: [io  0x1000-0x107f] could not be reserved
[    0.179971] system 00:00: [io  0x1180-0x11bf] has been reserved
[    0.179985] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.179992] system 00:00: [io  0xfe00] has been reserved
[    0.179999] system 00:00: [io  0x164e-0x174c] has been reserved
[    0.180036] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.180048] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.180056] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.180064] system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved
[    0.180074] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.180108] pnp 00:01: [dma 4]
[    0.180164] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.180254] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.180399] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.180472] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.180589] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.180702] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.181090] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
[    0.181526] pnp: PnP ACPI: found 8 devices
[    0.181532] ACPI: bus type PNP unregistered
[    0.181540] PnPBIOS: Disabled by ACPI PNP
[    0.222489] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
[    0.222501] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
[    0.222526] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 07] add_size 1000
[    0.222534] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000
[    0.222542] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000
[    0.222560] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000
[    0.222582] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 0b] add_size 1000
[    0.222590] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
[    0.222598] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000
[    0.222628] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.222635] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.222643] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.222650] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.222657] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.222665] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.222672] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.222678] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.222685] pci 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.222700] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[    0.222710] pci 0000:00:1c.1: BAR 14: assigned [mem 0x40200000-0x403fffff]
[    0.222720] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
[    0.222731] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40600000-0x407fffff 64bit pref]
[    0.222740] pci 0000:00:1c.3: BAR 14: assigned [mem 0x40800000-0x409fffff]
[    0.222750] pci 0000:00:1c.3: BAR 15: assigned [mem 0x40a00000-0x40bfffff 64bit pref]
[    0.222761] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.222770] pci 0000:00:1c.1: BAR 13: assigned [io  0x4000-0x4fff]
[    0.222780] pci 0000:00:1c.3: BAR 13: assigned [io  0x5000-0x5fff]
[    0.222788] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    0.222797] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.222808] pci 0000:00:1c.0:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.222819] pci 0000:00:1c.0:   bridge window [mem 0x40000000-0x401fffff 64bit pref]
[    0.222830] pci 0000:00:1c.1: PCI bridge to [bus 07]
[    0.222838] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.222849] pci 0000:00:1c.1:   bridge window [mem 0x40200000-0x403fffff]
[    0.222859] pci 0000:00:1c.1:   bridge window [mem 0x40400000-0x405fffff 64bit pref]
[    0.222871] pci 0000:00:1c.2: PCI bridge to [bus 09]
[    0.222879] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.222889] pci 0000:00:1c.2:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.222899] pci 0000:00:1c.2:   bridge window [mem 0x40600000-0x407fffff 64bit pref]
[    0.222911] pci 0000:00:1c.3: PCI bridge to [bus 0b]
[    0.222918] pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
[    0.222929] pci 0000:00:1c.3:   bridge window [mem 0x40800000-0x409fffff]
[    0.222938] pci 0000:00:1c.3:   bridge window [mem 0x40a00000-0x40bfffff 64bit pref]
[    0.222950] pci 0000:00:1e.0: PCI bridge to [bus 11]
[    0.222970] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.222977] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    0.222983] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
[    0.222989] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.222996] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.223002] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[    0.223009] pci_bus 0000:00: resource 10 [mem 0x40000000-0xf7ffffff]
[    0.223015] pci_bus 0000:00: resource 11 [io  0x0d00-0xfdff]
[    0.223022] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
[    0.223028] pci_bus 0000:05: resource 1 [mem 0xf0100000-0xf01fffff]
[    0.223035] pci_bus 0000:05: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[    0.223041] pci_bus 0000:07: resource 0 [io  0x4000-0x4fff]
[    0.223048] pci_bus 0000:07: resource 1 [mem 0x40200000-0x403fffff]
[    0.223054] pci_bus 0000:07: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
[    0.223061] pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
[    0.223067] pci_bus 0000:09: resource 1 [mem 0xf0200000-0xf02fffff]
[    0.223074] pci_bus 0000:09: resource 2 [mem 0x40600000-0x407fffff 64bit pref]
[    0.223080] pci_bus 0000:0b: resource 0 [io  0x5000-0x5fff]
[    0.223087] pci_bus 0000:0b: resource 1 [mem 0x40800000-0x409fffff]
[    0.223093] pci_bus 0000:0b: resource 2 [mem 0x40a00000-0x40bfffff 64bit pref]
[    0.223100] pci_bus 0000:11: resource 4 [io  0x0000-0x0cf7]
[    0.223107] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
[    0.223113] pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff]
[    0.223119] pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.223126] pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.223132] pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff]
[    0.223139] pci_bus 0000:11: resource 10 [mem 0x40000000-0xf7ffffff]
[    0.223145] pci_bus 0000:11: resource 11 [io  0x0d00-0xfdff]
[    0.223225] NET: Registered protocol family 2
[    0.223720] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.223762] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.223819] TCP: Hash tables configured (established 8192 bind 8192)
[    0.223861] TCP: reno registered
[    0.223868] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.223885] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.224044] NET: Registered protocol family 1
[    0.224080] pci 0000:00:02.0: Video device with shadowed ROM
[    0.225166] PCI: CLS 32 bytes, default 64
[    0.225313] Trying to unpack rootfs image as initramfs...
[    1.358507] Freeing initrd memory: 25820K (f4d82000 - f66b9000)
[    1.358695] Simple Boot Flag at 0x36 set to 0x1
[    1.359009] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x105
[    1.359028] microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x105
[    1.359163] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.359169] Scanning for low memory corruption every 60 seconds
[    1.359737] Initialise system trusted keyring
[    1.359836] audit: initializing netlink socket (disabled)
[    1.359860] type=2000 audit(1466156172.356:1): initialized
[    1.414515] bounce pool size: 64 pages
[    1.414553] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.417879] zbud: loaded
[    1.418091] VFS: Disk quotas dquot_6.5.2
[    1.418215] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.419444] fuse init (API version 7.22)
[    1.419669] msgmni has been set to 1738
[    1.419809] Key type big_key registered
[    1.420904] Key type asymmetric registered
[    1.420912] Asymmetric key parser 'x509' registered
[    1.421013] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.421107] io scheduler noop registered
[    1.421115] io scheduler deadline registered (default)
[    1.421189] io scheduler cfq registered
[    1.421563] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    1.421696] pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
[    1.421832] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    1.422062] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    1.422182] pcieport 0000:00:1c.3: enabling device (0000 -> 0003)
[    1.422307] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    1.422469] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.422509] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.422616] vesafb: mode is 800x600x32, linelength=3200, pages=0
[    1.422620] vesafb: scrolling: redraw
[    1.422626] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.423181] vesafb: framebuffer at 0xd0000000, mapped to 0xf8480000, using 1920k, total 1920k
[    1.429954] Console: switching to colour frame buffer device 100x37
[    1.436465] fb0: VESA VGA frame buffer device
[    1.436523] intel_idle: MWAIT substates: 0x20220
[    1.436539] intel_idle: v0.4 model 0x1C
[    1.436545] intel_idle: lapic_timer_reliable_states 0x2
[    1.436551] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[    1.436695] ipmi message handler version 39.2
[    1.437082] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.437470] ACPI: AC Adapter [ADP1] (on-line)
[    1.437818] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    1.438204] ACPI: Lid Switch [LID0]
[    1.438317] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.438328] ACPI: Power Button [PWRB]
[    1.438440] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    1.438449] ACPI: Sleep Button [SLPB]
[    1.438543] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.438551] ACPI: Power Button [PWRF]
[    1.442740] thermal LNXTHERM:00: registered as thermal_zone0
[    1.442747] ACPI: Thermal Zone [TZ00] (29 C)
[    1.442821] GHES: HEST is not enabled!
[    1.443160] isapnp: Scanning for PnP cards...
[    1.443182] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.453991] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.454017] ACPI: Battery Slot [BAT1] (battery present)
[    1.454915] Linux agpgart interface v0.103
[    1.455086] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[    1.455236] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    1.455421] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.455649] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.460379] brd: module loaded
[    1.462820] loop: module loaded
[    1.464246] libphy: Fixed MDIO Bus: probed
[    1.464600] tun: Universal TUN/TAP device driver, 1.6
[    1.464605] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.464733] PPP generic driver version 2.4.2
[    1.464855] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.464869] ehci-pci: EHCI PCI platform driver
[    1.465113] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.465133] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.465160] ehci-pci 0000:00:1d.7: debug port 1
[    1.469105] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    1.469177] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf0604000
[    1.480055] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.480237] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.480247] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.480254] usb usb1: Product: EHCI Host Controller
[    1.480262] usb usb1: Manufacturer: Linux 3.13.0-88-generic ehci_hcd
[    1.480269] usb usb1: SerialNumber: 0000:00:1d.7
[    1.480609] hub 1-0:1.0: USB hub found
[    1.480636] hub 1-0:1.0: 8 ports detected
[    1.481432] ehci-platform: EHCI generic platform driver
[    1.481467] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.481473] ohci-pci: OHCI PCI platform driver
[    1.481507] ohci-platform: OHCI generic platform driver
[    1.481535] uhci_hcd: USB Universal Host Controller Interface driver
[    1.481729] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.481747] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.481794] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    1.481952] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.481961] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.481969] usb usb2: Product: UHCI Host Controller
[    1.481976] usb usb2: Manufacturer: Linux 3.13.0-88-generic uhci_hcd
[    1.481984] usb usb2: SerialNumber: 0000:00:1d.0
[    1.482328] hub 2-0:1.0: USB hub found
[    1.482355] hub 2-0:1.0: 2 ports detected
[    1.482779] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.482797] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.482864] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    1.483018] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.483027] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.483035] usb usb3: Product: UHCI Host Controller
[    1.483042] usb usb3: Manufacturer: Linux 3.13.0-88-generic uhci_hcd
[    1.483049] usb usb3: SerialNumber: 0000:00:1d.1
[    1.483355] hub 3-0:1.0: USB hub found
[    1.483381] hub 3-0:1.0: 2 ports detected
[    1.483799] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.483817] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.483885] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    1.484091] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.484100] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.484108] usb usb4: Product: UHCI Host Controller
[    1.484115] usb usb4: Manufacturer: Linux 3.13.0-88-generic uhci_hcd
[    1.484122] usb usb4: SerialNumber: 0000:00:1d.2
[    1.484440] hub 4-0:1.0: USB hub found
[    1.484466] hub 4-0:1.0: 2 ports detected
[    1.484889] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.484908] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.484972] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    1.485125] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.485134] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.485142] usb usb5: Product: UHCI Host Controller
[    1.485149] usb usb5: Manufacturer: Linux 3.13.0-88-generic uhci_hcd
[    1.485156] usb usb5: SerialNumber: 0000:00:1d.3
[    1.485467] hub 5-0:1.0: USB hub found
[    1.485493] hub 5-0:1.0: 2 ports detected
[    1.485979] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.488676] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.488696] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.489061] mousedev: PS/2 mouse device common for all mice
[    1.489839] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.489889] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.490120] device-mapper: uevent: version 1.0.3
[    1.490338] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.490404] platform eisa.0: Probing EISA bus 0
[    1.490414] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.490422] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.490430] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.490438] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.490445] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.490453] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.490460] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.490467] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.490475] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.490482] platform eisa.0: EISA: Detected 0 cards
[    1.490499] cpufreq-nforce2: No nForce2 chipset.
[    1.490509] ledtrig-cpu: registered to indicate activity on CPUs
[    1.490910] TCP: cubic registered
[    1.491202] NET: Registered protocol family 10
[    1.491717] NET: Registered protocol family 17
[    1.491762] Key type dns_resolver registered
[    1.492256] Using IPI No-Shortcut mode
[    1.492516] Loading compiled-in X.509 certificates
[    1.505375] Loaded X.509 cert 'Magrathea: Glacier signing key: cb06c6ac0b71954620505a8f69e95b18a4e5c1ad'
[    1.505409] registered taskstats version 1
[    1.512213] Key type trusted registered
[    1.523584] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.526225] Key type encrypted registered
[    1.526239] AppArmor: AppArmor sha1 policy hashing enabled
[    1.526246] IMA: No TPM chip found, activating TPM-bypass!
[    1.526956] regulator-dummy: disabling
[    1.527117]   Magic number: 4:810:626
[    1.527201] pci 0000:00:1b.0: hash matches
[    1.527282] rtc_cmos 00:03: setting system clock to 2016-06-17 09:36:13 UTC (1466156173)
[    1.528291] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.528298] EDD information not available.
[    1.528418] PM: Hibernation image not present or could not be loaded.
[    1.754015] isapnp: No Plug & Play device found
[    1.754701] Freeing unused kernel memory: 884K (c19c7000 - c1aa4000)
[    1.754837] Write protecting the kernel text: 6580k
[    1.755009] Write protecting the kernel read-only data: 2784k
[    1.755014] NX-protecting the kernel data: 5708k
[    1.792833] systemd-udevd[99]: starting version 204
[    1.918151] sky2: driver version 1.30
[    1.918585] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
[    1.918974] sky2 0000:09:00.0: irq 44 for MSI/MSI-X
[    1.920128] sky2 0000:09:00.0 eth0: addr e8:11:32:58:db:9c
[    1.949282] [drm] Initialized drm 1.1.0 20060810
[    1.986734] ahci 0000:00:1f.2: version 3.0
[    1.986994] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    1.987144] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.987157] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[    1.988938] scsi0 : ahci
[    1.989200] scsi1 : ahci
[    1.989414] scsi2 : ahci
[    1.989635] scsi3 : ahci
[    1.989790] ata1: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604500 irq 45
[    1.989800] ata2: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604580 irq 45
[    1.989809] ata3: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604600 irq 45
[    1.989817] ata4: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604680 irq 45
[    2.076083] usb 1-8: new high-speed USB device number 3 using ehci-pci
[    2.187017] [drm] Memory usable by graphics device = 512M
[    2.187028] checking generic (d0000000 1e0000) vs hw (d0000000 10000000)
[    2.187033] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    2.187068] Console: switching to colour dummy device 80x25
[    2.212208] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[    2.212239] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.212245] [drm] Driver supports precise vblank timestamp query.
[    2.212260] usb 1-8: New USB device found, idVendor=2232, idProduct=1006
[    2.212269] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.212276] usb 1-8: Product: WebCam SCB-0355N
[    2.212284] usb 1-8: Manufacturer: Image Processor
[    2.212376] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.304109] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.305265] ata1.00: ATA-8: WDC WD2500BEVT-35A23T0, 01.01A01, max UDMA/133
[    2.305277] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.306533] ata1.00: configured for UDMA/133
[    2.307467] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVT-3 01.0 PQ: 0 ANSI: 5
[    2.307500] [drm] initialized overlay support
[    2.307948] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.308105] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.308190] ata3: SATA link down (SStatus 0 SControl 300)
[    2.308260] ata2: SATA link down (SStatus 0 SControl 300)
[    2.308334] sd 0:0:0:0: [sda] Write Protect is off
[    2.308346] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.308453] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.312140] ata4: SATA link down (SStatus 0 SControl 300)
[    2.337819] fbcon: inteldrmfb (fb0) is primary device
[    2.410009]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    2.411418] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.452083] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[    2.629918] usb 2-1: New USB device found, idVendor=046d, idProduct=c52f
[    2.629925] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.629931] usb 2-1: Product: USB Receiver
[    2.629937] usb 2-1: Manufacturer: Logitech
[    2.670746] hidraw: raw HID events driver (C) Jiri Kosina
[    2.705578] usbcore: registered new interface driver usbhid
[    2.705580] usbhid: USB HID core driver
[    2.725896] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7
[    2.726499] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
[    2.731795] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input8
[    2.734428] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
[    2.972518] psmouse serio1: synaptics: queried max coordinates: x [..5806], y [..4906]
[    3.037991] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0000, board id: 0, fw id: 597434
[    3.068129] Console: switching to colour frame buffer device 128x37
[    3.076973] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.076980] i915 0000:00:02.0: registered panic notifier
[    3.077564] ACPI: Video Device [IGD0] (multi-head: yes  rom: no  post: no)
[    3.079152] acpi device:04: registered as cooling_device2
[    3.079379] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    3.080232] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.080884] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    5.616994] random: nonblocking pool is initialized
[    6.227967] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   19.021646] Adding 1036284k swap on /dev/sda6.  Priority:-1 extents:1 across:1036284k FS
[   19.030953] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   19.284261] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.813161] systemd-udevd[338]: starting version 204
[   20.407356] lp: driver loaded but no devices found
[   20.502144] ppdev: user-space parallel port driver
[   21.239102] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   21.425105] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   21.425127] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.PCI0.LPC0.PMIO 2 (20131115/utaddress-251)
[   21.425143] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.425154] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \_SB_.PCI0.LPC0.GPOX 1 (20131115/utaddress-251)
[   21.425168] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.425283] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   22.168051] cfg80211: Calling CRDA to update world regulatory domain
[   22.525958] Bluetooth: Core ver 2.17
[   22.526133] NET: Registered protocol family 31
[   22.526140] Bluetooth: HCI device and connection manager initialized
[   22.526159] Bluetooth: HCI socket layer initialized
[   22.526171] Bluetooth: L2CAP socket layer initialized
[   22.526193] Bluetooth: SCO socket layer initialized
[   22.645005] Linux video capture interface: v2.00
[   22.751484] type=1400 audit(1466156194.720:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=502 comm="apparmor_parser"
[   22.751511] type=1400 audit(1466156194.720:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=502 comm="apparmor_parser"
[   22.760001] type=1400 audit(1466156194.728:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=502 comm="apparmor_parser"
[   22.769953] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.769963] Bluetooth: BNEP filters: protocol multicast
[   22.769984] Bluetooth: BNEP socket layer initialized
[   22.788084] Bluetooth: RFCOMM TTY layer initialized
[   22.788109] Bluetooth: RFCOMM socket layer initialized
[   22.788131] Bluetooth: RFCOMM ver 1.11
[   23.183249] type=1400 audit(1466156195.152:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=526 comm="apparmor_parser"
[   23.183277] type=1400 audit(1466156195.152:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=526 comm="apparmor_parser"
[   23.183296] type=1400 audit(1466156195.152:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=526 comm="apparmor_parser"
[   23.195743] type=1400 audit(1466156195.164:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=526 comm="apparmor_parser"
[   23.195775] type=1400 audit(1466156195.164:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=526 comm="apparmor_parser"
[   23.204888] type=1400 audit(1466156195.176:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=526 comm="apparmor_parser"
[   23.719430] uvcvideo: Found UVC 1.00 device WebCam SCB-0355N (2232:1006)
[   23.725291] init: cups main process (511) killed by HUP signal
[   23.725345] init: cups main process ended, respawning
[   23.745631] input: WebCam SCB-0355N as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input10
[   23.769393] usbcore: registered new interface driver uvcvideo
[   23.769403] USB Video Class driver (1.1.1)
[   24.343713] ath: phy0: Enable LNA combining
[   24.361764] samsung_laptop: Disabling ACPI video driver
[   24.765928] samsung_laptop: enabled workaround for brightness stepping quirk
[   24.924398] samsung_laptop: detected SABI interface: SwSmi@
[   24.935327] ath: phy0: ASPM enabled: 0x42
[   24.935338] ath: EEPROM regdomain: 0x65
[   24.935344] ath: EEPROM indicates we should expect a direct regpair map
[   24.935352] ath: Country alpha2 being used: 00
[   24.935357] ath: Regpair used: 0x65
[   25.372085] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   25.389453] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8640000, irq=16
[   25.672728] init: failsafe main process (583) killed by TERM signal
[   26.106160] cfg80211: World regulatory domain updated:
[   26.106172] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   26.106181] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   26.106188] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   26.106194] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   26.106201] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   26.106208] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   26.501238] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[   26.598084] SKU: Nid=0x1d sku_cfg=0x40038205
[   26.598093] SKU: port_connectivity=0x1
[   26.598098] SKU: enable_pcbeep=0x0
[   26.598103] SKU: check_sum=0x00000003
[   26.598108] SKU: customization=0x00000082
[   26.598112] SKU: external_amp=0x0
[   26.598117] SKU: platform_type=0x1
[   26.598121] SKU: swap=0x0
[   26.598126] SKU: override=0x1
[   26.598470] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   26.598478]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   26.598485]    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   26.598489]    mono: mono_out=0x0
[   26.598493]    inputs:
[   26.598499]      Internal Mic=0x19
[   26.598505]      Mic=0x18
[   26.598511] realtek: No valid SSID, checking pincfg 0x40038205 for NID 0x1d
[   26.598516] realtek: Enabling init ASM_ID=0x8205 CODEC_ID=10ec0269
[   26.617320] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   26.620717] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   27.816351] type=1400 audit(1466156199.788:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/share/gdm/guest-session/Xsession" pid=780 comm="apparmor_parser"
[   27.825391] type=1400 audit(1466156199.796:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=781 comm="apparmor_parser"
[   27.825423] type=1400 audit(1466156199.796:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=781 comm="apparmor_parser"
[   27.826633] type=1400 audit(1466156199.796:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=781 comm="apparmor_parser"
[   27.898694] type=1400 audit(1466156199.868:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=782 comm="apparmor_parser"
[   27.898729] type=1400 audit(1466156199.868:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=782 comm="apparmor_parser"
[   27.898755] type=1400 audit(1466156199.868:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=782 comm="apparmor_parser"
[   27.927635] type=1400 audit(1466156199.896:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=782 comm="apparmor_parser"
[   27.927668] type=1400 audit(1466156199.896:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=782 comm="apparmor_parser"
[   27.928740] type=1400 audit(1466156199.900:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=782 comm="apparmor_parser"
[   31.255194] init: gdm main process (942) killed by TERM signal
[   36.104466] init: plymouth-upstart-bridge main process ended, respawning
[   36.153670] init: plymouth-upstart-bridge main process (1174) terminated with status 1
[   36.153734] init: plymouth-upstart-bridge main process ended, respawning
[   53.029418] audit_printk_skb: 126 callbacks suppressed
[   53.029427] type=1400 audit(1466156225.000:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1524 comm="apparmor_parser"
[   53.029447] type=1400 audit(1466156225.000:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1524 comm="apparmor_parser"
[   53.030778] type=1400 audit(1466156225.000:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1524 comm="apparmor_parser"
[  369.239299] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  369.242746] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  369.255029] sky2 0000:09:00.0 eth0: enabling interface
[  369.259358] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  369.265552] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  371.128830] wlan0: authenticate with 8a:95:04:be:61:8d
[  371.184275] wlan0: send auth to 8a:95:04:be:61:8d (try 1/3)
[  371.195184] wlan0: authenticated
[  371.196371] wlan0: associate with 8a:95:04:be:61:8d (try 1/3)
[  371.202084] wlan0: RX AssocResp from 8a:95:04:be:61:8d (capab=0x401 status=0 aid=1)
[  371.202208] wlan0: associated
[  371.202324] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  371.205270] wlan0: deauthenticating from 8a:95:04:be:61:8d by local choice (reason=2)
[  371.228290] cfg80211: Calling CRDA to update world regulatory domain
[  371.228514] wlan0: authenticate with 8a:95:04:be:61:8d
[  371.251533] wlan0: send auth to 8a:95:04:be:61:8d (try 1/3)
[  371.254604] wlan0: authenticated
[  371.255821] cfg80211: World regulatory domain updated:
[  371.255833] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  371.255842] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  371.255850] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  371.255858] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  371.255866] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  371.255874] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  371.264068] wlan0: associate with 8a:95:04:be:61:8d (try 1/3)
[  371.267480] wlan0: RX AssocResp from 8a:95:04:be:61:8d (capab=0x401 status=0 aid=1)
[  371.267585] wlan0: associated
[  371.859261] perf samples too long (2541 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[  381.270611] wlan0: deauthenticating from 8a:95:04:be:61:8d by local choice (reason=3)
[  381.281669] cfg80211: Calling CRDA to update world regulatory domain
[  381.322081] cfg80211: World regulatory domain updated:
[  381.322091] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  381.322100] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  381.322107] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  381.322114] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  381.322121] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  381.322128] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  382.271074] wlan0: authenticate with 8a:95:04:be:61:8d
[  382.303133] wlan0: send auth to 8a:95:04:be:61:8d (try 1/3)
[  382.305167] wlan0: authenticated
[  382.308705] wlan0: associate with 8a:95:04:be:61:8d (try 1/3)
[  382.312428] wlan0: RX AssocResp from 8a:95:04:be:61:8d (capab=0x401 status=0 aid=1)
[  382.312551] wlan0: associated
[  390.852095] usb 1-3: new high-speed USB device number 4 using ehci-pci
[  390.984940] usb 1-3: New USB device found, idVendor=0781, idProduct=5567
[  390.984953] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  390.984962] usb 1-3: Product: Cruzer Blade
[  390.984970] usb 1-3: Manufacturer: SanDisk
[  390.984979] usb 1-3: SerialNumber: 2006087660029100AB88
[  391.116645] usb-storage 1-3:1.0: USB Mass Storage device detected
[  391.116914] scsi4 : usb-storage 1-3:1.0
[  391.117205] usbcore: registered new interface driver usb-storage
[  392.117422] scsi 4:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.26 PQ: 0 ANSI: 5
[  392.118565] sd 4:0:0:0: Attached scsi generic sg1 type 0
[  392.120782] sd 4:0:0:0: [sdb] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
[  392.122377] sd 4:0:0:0: [sdb] Write Protect is off
[  392.122394] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[  392.123675] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  392.146546]  sdb: sdb1
[  392.158983] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[  392.724631] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1131.308236] perf samples too long (5019 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[ 2015.807153] type=1400 audit(1466158187.774:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2877 comm="apparmor_parser"
[ 2015.807188] type=1400 audit(1466158187.774:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2877 comm="apparmor_parser"
[ 2015.809284] type=1400 audit(1466158187.778:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2877 comm="apparmor_parser"
[ 2782.790080] systemd-hostnamed[3010]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 2820.576497] ecryptfs_decrypt_page: Error attempting to read lower page; rc = [-4]
[ 2820.576506] ecryptfs_readpage: Error decrypting page; rc = [-4]
[ 3019.814497] ecryptfs_decrypt_page: Error attempting to read lower page; rc = [-4]
[ 3019.814510] ecryptfs_readpage: Error decrypting page; rc = [-4]

[heartsmagic]

@sumatilk, 14.04 mü kullanıyorsun profilinde yazdığı gibi? Şu çıktıları geçer misin lütfen:

Kod Seç Genişlet

lsb_release -a
arch
uname -r

[ilksumat]

Evet 14.04 kullanıyorum, burdan sorup yükseltmiştim 12.04den.

Kod Seç Genişlet





lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 14.04.4 LTS
Release: 14.04
Codename: trusty


arch
i686


uname -r
3.13.0-88-generic

Teşekkürler.

[heartsmagic]

Kod Seç Genişlet

wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.4-wily/linux-headers-4.4.0-040400-generic_4.4.0-040400.201601101930_i386.deb
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.4-wily/linux-headers-4.4.0-040400_4.4.0-040400.201601101930_all.deb
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.4-wily/linux-image-4.4.0-040400-generic_4.4.0-040400.201601101930_i386.deb
sudo dpkg -i *.deb

Bu işlemden sonra yeni çekirdek kurulur sisteme. Yeniden başlatırsın makineyi, denersin. Ola ki açılmazsa Grub ekranında "Diğer seçenekler" ya da ona benzer bir şey olacaktır. Oraya girip eski çekirdeği seçersin, 3.13 olanı yani. Grub görünmüyorsa makine başlar başlamaz Shift tuşuna basılı tutmalısın.

[ilksumat]

Kod Seç Genişlet

wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.4-wily/linux-headers-4.4.0-040400-generic_4.4.0-040400.201601101930_i386.deb
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.4-wily/linux-headers-4.4.0-040400_4.4.0-040400.201601101930_all.deb
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.4-wily/linux-image-4.4.0-040400-generic_4.4.0-040400.201601101930_i386.deb
sudo dpkg -i *.deb

Bu işlemden sonra yeni çekirdek kurulur sisteme. Yeniden başlatırsın makineyi, denersin. Ola ki açılmazsa Grub ekranında "Diğer seçenekler" ya da ona benzer bir şey olacaktır. Oraya girip eski çekirdeği seçersin, 3.13 olanı yani. Grub görünmüyorsa makine başlar başlamaz Shift tuşuna basılı tutmalısın.

Teşekkür fakat bu kampanya beni aştı    yani anlamadım yazdığınızı. Temel bilgim zayıf olduğu için.

Misal "yeni çekirdek kurulur sisteme" olunca ne olmuş olur? Veya "grup ekranında diğer seçenekler ya da ona benzer bir şey olacaktır. Oraya girip eski çekirdeği 3.13 olanı yani" demişsiniz ya, orası bilgisayar ilk açılınca çıkan şeyler mi, hani mesela bende windowsunda yüklü olduğunu, onu da seçebileceğimi gösteren liste? Biraz daha izahat olmalıki doğru şekilde yapabileyim.

[mhmtkrktr]

Kod Seç Genişlet

05:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)

Benim kullandığım kartın aynısı var sende. Bu kartın yaklaşık iki ay önce yayınlanan NetworkManager paketine kadar hiç tökezlediğini görmedim. Ubuntu'nun biraz geriden geldiğini düşünürsek bir ihtimal aynı sorun olabilir mi?
Arch tarafında bir sonraki güncellemede düzeldi bu sorun. Sorunu çözmek için networkmanager paketini bir alt sürüme çekmek yeterli olmuştu. Bundan iki hafta sonra yayınlanan yeni pakette ise sorun kalmamıştı.

[ilksumat]

Kod Seç Genişlet

wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.4-wily/linux-headers-4.4.0-040400-generic_4.4.0-040400.201601101930_i386.deb
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.4-wily/linux-headers-4.4.0-040400_4.4.0-040400.201601101930_all.deb
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.4-wily/linux-image-4.4.0-040400-generic_4.4.0-040400.201601101930_i386.deb
sudo dpkg -i *.deb

Yani şimdi bunların hepsini tek tek yapıp sonucu bildireyim?

Bu işlemden sonra yeni çekirdek kurulur sisteme. Yeniden başlatırsın makineyi, denersin. Ola ki açılmazsa Grub ekranında "Diğer seçenekler" ya da ona benzer bir şey olacaktır. Oraya girip eski çekirdeği seçersin, 3.13 olanı yani. Grub görünmüyorsa makine başlar başlamaz Shift tuşuna basılı tutmalısın.

Teşekkür fakat bu kampanya beni aştı    yani anlamadım yazdığınızı. Temel bilgim zayıf olduğu için.

Misal "yeni çekirdek kurulur sisteme" olunca ne olmuş olur? Veya "grup ekranında diğer seçenekler ya da ona benzer bir şey olacaktır. Oraya girip eski çekirdeği 3.13 olanı yani" demişsiniz ya, orası bilgisayar ilk açılınca çıkan şeyler mi, hani mesela bende windowsunda yüklü olduğunu, onu da seçebileceğimi gösteren liste? Biraz daha izahat olmalıki doğru şekilde yapabileyim.

Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 22 Haziran 2016 - 12:44:54
Merhaba, uyguladım. Çıktılar aşağıki gibi. Yeniden başlattıktan sonra ki durumu buraya yeniden yazarım. Teşekkürler.

Kod Seç Genişlet






wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.4-wily/linux-headers-4.4.0-040400-generic_4.4.0-040400.201601101930_i386.deb
--2016-06-22 11:31:28--  http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.4-wily/linux-headers-4.4.0-040400-generic_4.4.0-040400.201601101930_i386.deb
Resolving kernel.ubuntu.com (kernel.ubuntu.com)... 91.189.94.216
Connecting to kernel.ubuntu.com (kernel.ubuntu.com)|91.189.94.216|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 728982 (712K) [application/x-debian-package]
Saving to: 'linux-headers-4.4.0-040400-generic_4.4.0-040400.201601101930_i386.deb'

100%[======================================>] 728,982      294KB/s   in 2.4s   

2016-06-22 11:31:31 (294 KB/s) - 'linux-headers-4.4.0-040400-generic_4.4.0-040400.201601101930_i386.deb' saved [728982/728982]

rennie@netbook:~$ wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.4-wily/linux-headers-4.4.0-040400_4.4.0-040400.201601101930_all.deb
--2016-06-22 11:31:57--  http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.4-wily/linux-headers-4.4.0-040400_4.4.0-040400.201601101930_all.deb
Resolving kernel.ubuntu.com (kernel.ubuntu.com)... 91.189.94.216
Connecting to kernel.ubuntu.com (kernel.ubuntu.com)|91.189.94.216|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 9758244 (9.3M) [application/x-debian-package]
Saving to: 'linux-headers-4.4.0-040400_4.4.0-040400.201601101930_all.deb'

100%[======================================>] 9,758,244    255KB/s   in 36s   

2016-06-22 11:32:34 (265 KB/s) - 'linux-headers-4.4.0-040400_4.4.0-040400.201601101930_all.deb' saved [9758244/9758244]




wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.4-wily/linux-image-4.4.0-040400-generic_4.4.0-040400.201601101930_i386.deb
--2016-06-22 11:32:52--  http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.4-wily/linux-image-4.4.0-040400-generic_4.4.0-040400.201601101930_i386.deb
Resolving kernel.ubuntu.com (kernel.ubuntu.com)... 91.189.94.216
Connecting to kernel.ubuntu.com (kernel.ubuntu.com)|91.189.94.216|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 55031794 (52M) [application/x-debian-package]
Saving to: 'linux-image-4.4.0-040400-generic_4.4.0-040400.201601101930_i386.deb'

100%[======================================>] 55,031,794  83.0KB/s   in 3m 52s

2016-06-22 11:36:45 (231 KB/s) - 'linux-image-4.4.0-040400-generic_4.4.0-040400.201601101930_i386.deb' saved [55031794/55031794]

sudo dpkg -i *.deb
Selecting previously unselected package linux-headers-4.4.0-040400.
(Reading database ... 328352 files and directories currently installed.)
Preparing to unpack linux-headers-4.4.0-040400_4.4.0-040400.201601101930_all.deb ...
Unpacking linux-headers-4.4.0-040400 (4.4.0-040400.201601101930) ...
Selecting previously unselected package linux-headers-4.4.0-040400-generic.
Preparing to unpack linux-headers-4.4.0-040400-generic_4.4.0-040400.201601101930_i386.deb ...
Unpacking linux-headers-4.4.0-040400-generic (4.4.0-040400.201601101930) ...
Selecting previously unselected package linux-image-4.4.0-040400-generic.
Preparing to unpack linux-image-4.4.0-040400-generic_4.4.0-040400.201601101930_i386.deb ...
Done.
Unpacking linux-image-4.4.0-040400-generic (4.4.0-040400.201601101930) ...
Selecting previously unselected package tor.
Preparing to unpack tor_0.2.2.35-1_i386.deb ...
Unpacking tor (0.2.2.35-1) ...
Setting up linux-headers-4.4.0-040400 (4.4.0-040400.201601101930) ...
Setting up linux-headers-4.4.0-040400-generic (4.4.0-040400.201601101930) ...
Examining /etc/kernel/header_postinst.d.
Setting up linux-image-4.4.0-040400-generic (4.4.0-040400.201601101930) ...
Running depmod.
update-initramfs: deferring update (hook will be called later)
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.4.0-040400-generic /boot/vmlinuz-4.4.0-040400-generic
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.4.0-040400-generic /boot/vmlinuz-4.4.0-040400-generic
update-initramfs: Generating /boot/initrd.img-4.4.0-040400-generic
run-parts: executing /etc/kernel/postinst.d/pm-utils 4.4.0-040400-generic /boot/vmlinuz-4.4.0-040400-generic
run-parts: executing /etc/kernel/postinst.d/update-notifier 4.4.0-040400-generic /boot/vmlinuz-4.4.0-040400-generic
run-parts: executing /etc/kernel/postinst.d/zz-update-grub 4.4.0-040400-generic /boot/vmlinuz-4.4.0-040400-generic
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-4.4.0-040400-generic
Found initrd image: /boot/initrd.img-4.4.0-040400-generic
Found linux image: /boot/vmlinuz-3.13.0-88-generic
Found initrd image: /boot/initrd.img-3.13.0-88-generic
Found linux image: /boot/vmlinuz-3.13.0-87-generic
Found initrd image: /boot/initrd.img-3.13.0-87-generic
Found linux image: /boot/vmlinuz-3.13.0-86-generic
Found initrd image: /boot/initrd.img-3.13.0-86-generic
Found linux image: /boot/vmlinuz-3.13.0-85-generic
Found initrd image: /boot/initrd.img-3.13.0-85-generic
Found linux image: /boot/vmlinuz-3.13.0-83-generic
Found initrd image: /boot/initrd.img-3.13.0-83-generic
Found linux image: /boot/vmlinuz-3.2.0-101-generic
Found initrd image: /boot/initrd.img-3.2.0-101-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Found Windows NT/2000/XP on /dev/sda1
done
Setting up tor (0.2.2.35-1) ...
Something or somebody made /var/run/tor disappear.
Creating one for you again.
Raising maximum number of filedescriptors (ulimit -n) to 32768.
Starting tor daemon: tor...
Jun 22 11:41:50.643 [notice] Tor v0.2.2.35 (git-73ff13ab3cc9570d). This is experimental software. Do not rely on it for strong anonymity. (Running on Linux i686)
Jun 22 11:41:50.646 [notice] We were compiled with headers from version 2.0.16-stable of Libevent, but we're using a Libevent library that says it's version 2.0.21-stable.
Jun 22 11:41:50.646 [notice] Initialized libevent version 2.0.21-stable using method epoll. Good.
Jun 22 11:41:50.647 [notice] Opening Socks listener on 127.0.0.1:9050
Jun 22 11:41:50.648 [notice] Opening Control listener on /var/run/tor/control
done.
Processing triggers for man-db (2.6.7.1-1ubuntu1) ...
Processing triggers for ureadahead (0.100.0-16) ...
ureadahead will be reprofiled on next reboot

[ilksumat]

Merhaba, yine koptu. Bu mesaj görülür değilmi, hep ilk mesajın altına yazmış oluyorum çünkü.

[heartsmagic]

@sumatilk, aradan belirli bir zaman geçmeyince iletiler birleştiriliyor, bu nedenle yeni ileti gibi görünmüyor.
@mhmtkrktr, sorun yapan sürüm neydi ve şu anki sürüm nedir acaba sizin tarafta? Bende bir atherso sahibiyim, sadece model farklıydı ancak sanırım aynı sürücüyü kullanıyordur. Eski, yeni hiçbir sürümde bu sorunu yaşamadım ama arada güncelleme atlamış olabilirim.