Ses ve kulaklık sorunu

[OnLive]

Merhabalar. Ubuntu 16.04'de iki kulaklık denedim, takınca ses gelmiyor. Ses ayarlarından Hat Çıkışı seçili iken kulaklardan ses gelmiyor. Elle Kulaklıklar'ı seçiyorum bu sefer hem kulaklıktan, hem de dışarıdan ses geliyor? Ubuntu 14.04'de böyle bir sorun yoktu. Yardımcı olursanız sevinririm, teşekkürler.

[if]

@Onlive, konuyu Donanım > Ses Kartları bölümüne açmanız gerekiyordu. Yönetici arkadaşlarımız taşıyacaktır. Şu[1] konudaki komutların çıktılarına bakayım. Ayrıca bilgisayarın marka ve modelini de öğreneyim.

[1] https://forum.ubuntu-tr.net/index.php?topic=39008.0

[OnLive]

@Onlive, konuyu Donanım > Ses Kartları bölümüne açmanız gerekiyordu. Yönetici arkadaşlarımız taşıyacaktır. Şu[1] konudaki komutların çıktılarına bakayım. Ayrıca bilgisayarın marka ve modelini de öğreneyim.

[1] https://forum.ubuntu-tr.net/index.php?topic=39008.0

Ubuntu 14.04 zamanında hiç sorun yoktu. 16.04'e geçince bu sorun başladı. O yüzden yazılımsal bir sorun olabileceğini düşündüğüm için konuyu buraya açmıştım. Bilgisayar toplama kasa. Donanım özelliklerini pek bilmiyorum. İşlemcisi Intel Core i3 olmalı. Bu arada çıktılar;

Kod Seç Genişlet

Distributor ID: Ubuntu
Description: Ubuntu 16.04 LTS
Release: 16.04
Codename: xenial

Kod Seç Genişlet

00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)

Kod Seç Genişlet

/proc/asound/card0/codec#0:Codec: Intel Haswell HDMI
/proc/asound/card1/codec#2:Codec: Realtek ALC887-VD

Kod Seç Genişlet

snd_hda_codec_hdmi     53248  1
snd_hda_codec_realtek    81920  1
snd_hda_codec_generic    77824  1 snd_hda_codec_realtek
snd_hda_intel          36864  5
snd_hda_codec         135168  4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hda_core           73728  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               106496  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              32768  2 snd_pcm,snd_seq
snd                    81920  21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
soundcore              16384  1 snd

Kod Seç Genişlet

**** PLAYBACK Donanım Aygıtlarının Listesi ****
kart 0: HDMI [HDA Intel HDMI], aygıt 3: HDMI 0 [HDMI 0]
  Altaygıtlar: 1/1
  Altaygıt #0: subdevice #0
kart 0: HDMI [HDA Intel HDMI], aygıt 7: HDMI 1 [HDMI 1]
  Altaygıtlar: 1/1
  Altaygıt #0: subdevice #0
kart 0: HDMI [HDA Intel HDMI], aygıt 8: HDMI 2 [HDMI 2]
  Altaygıtlar: 1/1
  Altaygıt #0: subdevice #0
kart 1: PCH [HDA Intel PCH], aygıt 0: ALC887-VD Analog [ALC887-VD Analog]
  Altaygıtlar: 1/1
  Altaygıt #0: subdevice #0

[if]

@OnLive,

Kod Seç Genişlet

echo "options snd-hda-intel model=generic" | sudo tee -a /etc/modprobe.d/alsa-base.conf komutundan sonra sistemi yeniden başlatıp dener misiniz?

https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1457476

[OnLive]

Malesef sorun devam ediyor. Verdiğiniz komutun çıktısı;

Kod Seç Genişlet

options snd-hda-intel model=generic

[heartsmagic]

Kod Seç Genişlet

grep snd-hda-intel /etc/modprobe.d/alsa-base.confne diyor?

[OnLive]

Kod Seç Genişlet

grep snd-hda-intel /etc/modprobe.d/alsa-base.confne diyor?

Sorun hâlâ devam ediyor. Aynı çıktıyı verdi.

Komut;

Kod Seç Genişlet

ubuntu@Linux:~$ grep snd-hda-intel /etc/modprobe.d/alsa-base.conf

Çıktı;

Kod Seç Genişlet

options snd-hda-intel model=generic

[heartsmagic]

Kod Seç Genişlet

lspci -vvnçıktısını bir görebilir miyiz? Bir de, bu makinenin marka ve modeli nedir?

[OnLive]

Kod Seç Genişlet

lspci -vvnçıktısını bir görebilir miyiz? Bir de, bu makinenin marka ve modeli nedir?

Bilgisayarın marka modeli yok, toplama kasa. Ama ben toplamadım. Bu arada verdiğiniz komutun çıktısı;

Kod Seç Genişlet

00:00.0 0600: 8086:0c00 (rev 06)
Subsystem: 1458:5000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: hsw_uncore

00:01.0 0604: 8086:0c01 (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7d00000-f7dfffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:02.0 0300: 8086:041e (rev 06) (prog-if 00 [VGA controller])
Subsystem: 1458:d000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915

00:03.0 0403: 8086:0c0c (rev 06)
Subsystem: 8086:2010
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 35
Region 0: Memory at f7e14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

00:14.0 0c03: 8086:8c31 (rev 05) (prog-if 30 [XHCI])
Subsystem: 1458:5007
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd

00:16.0 0780: 8086:8c3a (rev 04)
Subsystem: 1458:1c3a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 32
Region 0: Memory at f7e1e000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me

00:1a.0 0c03: 8086:8c2d (rev 05) (prog-if 20 [EHCI])
Subsystem: 1458:5006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7e1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci

00:1b.0 0403: 8086:8c20 (rev 05)
Subsystem: 1458:a002
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 33
Region 0: Memory at f7e10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

00:1c.0 0604: 8086:8c10 (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.2 0604: 8086:8c14 (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 26
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1d.0 0c03: 8086:8c26 (rev 05) (prog-if 20 [EHCI])
Subsystem: 1458:5006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7e1b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci

00:1f.0 0601: 8086:8c5c (rev 05)
Subsystem: 1458:5001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich

00:1f.2 0106: 8086:8c02 (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: 1458:b005
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 29
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7e1a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

00:1f.3 0c05: 8086:8c22 (rev 05)
Subsystem: 1458:5001
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 10
Region 0: Memory at f7e19000 (64-bit, non-prefetchable) [disabled] [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel modules: i2c_i801

01:00.0 0300: 1002:68f9 (prog-if 00 [VGA controller])
Subsystem: 1043:0473
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at f7d20000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at f7d00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon

01:00.1 0403: 1002:aa68
Subsystem: 1043:aa68
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 34
Region 0: Memory at f7d40000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

03:00.0 0200: 10ec:8168 (rev 06)
Subsystem: 1458:e000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at f7c00000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169



[if]

Geçtiğim hata kaydından anladığım bu[1] "commit" sorunun kaynağı. Fakat bu[2] "commit" ile sorunun düzelmesi gerek. Son "commit" 4.4 serisine ait olduğu için 4.5 serisinden bir çekirdeği deneyebiliriz. Bir de model=nofixup seçeneğini deneyelim.

[1] https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda/patch_realtek.c?id=0c25ad80408e95e0a4fbaf0056950206e95f726f
[2] https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda/patch_realtek.c?id=6c361d10e0eb859233c71954abcd20d2d8700587