İnternet sorunu

Başlatan kadir.uysal57, 17 Aralık 2015 - 21:55:45

« önceki - sonraki »

0 Üyeler ve 3 Ziyaretçi konuyu incelemekte.

Yazdır
Aşağı git Sayfa1
Kullanıcı Eylemleri

kadir.uysal57

17 Aralık 2015 - 21:55:45
Abilerim eğer konuyu yanlış yere açtırsam özür dilerim arama cubuğu bozuk oldugu için  konum hakkında araştırma yapamıyorum
1.sorunum bilgisayarım durmadan internet bağlatısı kopuyor ve yeniden bağlanıyor kablolu internet kullanıyorum masa üstü
2. ubuntu yazılım merkezinde 4.51 mb dosya indirmem gerekiyor ama 15 dk da 65 kb indirdi bundan once windows kullanıyordum 800 1000 kbps arası indirme yaparken ubuntuda 300 kbps indirme yapıyorum yardım edebiliecek var mı

seron

#1
17 Aralık 2015 - 22:00:20

kadir.uysal57

#2
17 Aralık 2015 - 22:07:49
Alıntı yapılan: seron - 17 Aralık 2015 - 22:00:20
Şundan dolayı olabilir mi? :
http://www.msn.com/tr-tr/haber/turkiye/t%C3%BCrkiyedeki-internet-siteleri-sald%C4%B1r%C4%B1-alt%C4%B1nda/ar-BBnFeuf?li=AAatXwc
bu sadece haber ama; doğruluğu bilinmiyor...
olabilir ama konuyu paylaştıgım zamandan bu yana 950 kb oldu ubuntu yazılım merkezinde indirmemden sonra tarayıcıdan indirdiğim zaman  300 kpbs indiriyorum ama ubuntu merkezinde bayt olarak indiriyor sanırım bunun saldırır ile bir alakası yok internet hızımın 300 kbps olması normal olabilir bilgilendirme için teşekkürler

heartsmagic

#3
17 Aralık 2015 - 22:31:51
Yazılım ve Güncelleştirmeler uygulamasını açarak sunucu olarak Ana Sunucu ayarı yapıp tekrar dener misin? Eğer sorun devam ederse şu başlıktaki komutların çıktılarını buraya kod etiketi içinde aktar lütfen: agkomut
Kod etiketi için: kodetiketi
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.

kadir.uysal57

#4
17 Aralık 2015 - 23:02:14
Alıntı yapılan: heartsmagic - 17 Aralık 2015 - 22:31:51
Yazılım ve Güncelleştirmeler uygulamasını açarak sunucu olarak Ana Sunucu ayarı yapıp tekrar dener misin? Eğer sorun devam ederse şu başlıktaki komutların çıktılarını buraya kod etiketi içinde aktar lütfen: http://kb.ubuntu-tr.net/ag-komutlari
Kod etiketi için: http://kb.ubuntu-tr.net/kodetiketi
ana sunucu yaptım ve dosyayı indiremiyorum bağımlılık sağlanmadı:libwxbase2.8.0(>=2.8.12.1) hatası ile karsılasıyorum
cat /etc/lsb-release
Kod Seç
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=15.10
DISTRIB_CODENAME=wily
DISTRIB_DESCRIPTION="Ubuntu 15.10"
uname -a
Kod Seç
Linux kadir 4.2.0-19-generic #23-Ubuntu SMP Wed Nov 11 11:39:30 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

lspci
Kod Seç
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation H61 Express Chipset Family LPC Controller (rev 05)
00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
00:1f.5 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller (rev 05)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Juniper LE [Radeon HD 5670 640SP Edition]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Juniper HDMI Audio [Radeon HD 5700 Series]
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)


lsusb
Kod Seç
Bus 002 Device 004: ID 1bcf:0005 Sunplus Innovation Technology Inc. Optical Mouse
Bus 002 Device 003: ID 04d9:1702 Holtek Semiconductor, Inc. Keyboard LKS02
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 03f0:1a40 Hewlett-Packard
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


rfkill list
Kod Seç
 

sudo lshw -C network
Kod Seç
*-network               
       açıklama: Eternet interface
       ürün: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       mantıksal ad: enp3s0
       sürüm: 06
       serial: 54:04:a6:84:52:06
       boyut: 100Mbit/s
       kapasite: 1Gbit/s
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress msix vpd bus_master cap_list eternet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       yapılandırma: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.1.2 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
       kaynaklar: irq:26 ioport:d000(boyut=256) bellek:f0004000-f0004fff bellek:f0000000-f0003fff


ifconfig
Kod Seç
enp3s0    Link encap:Ethernet  HWaddr 54:04:a6:84:52:06 
          inet addr:192.168.1.2  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:11569 errors:0 dropped:0 overruns:0 frame:0
          TX packets:11957 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:10143659 (10.1 MB)  TX bytes:1635566 (1.6 MB)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:3909 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3909 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:451674 (451.6 KB)  TX bytes:451674 (451.6 KB)

iwconfig
Kod Seç
enp3s0    no wireless extensions.

lo        no wireless extensions.

lsmod
Kod Seç
Module                  Size  Used by
binfmt_misc            20480  1
nls_iso8859_1          16384  1
fglrx               13447168  185
intel_rapl             20480  0
iosf_mbi               16384  1 intel_rapl
x86_pkg_temp_thermal    16384  0
snd_hda_codec_realtek    86016  1
intel_powerclamp       16384  0
snd_hda_codec_hdmi     49152  1
snd_hda_codec_generic    77824  1 snd_hda_codec_realtek
snd_hda_intel          36864  5
coretemp               16384  0
snd_hda_codec         135168  4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hda_core           65536  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               106496  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
kvm                   512000  0
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
input_leds             16384  0
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
crct10dif_pclmul       16384  0
eeepc_wmi              16384  0
amd_iommu_v2           20480  1 fglrx
snd_timer              32768  2 snd_pcm,snd_seq
crc32_pclmul           16384  0
asus_wmi               28672  1 eeepc_wmi
sparse_keymap          16384  1 asus_wmi
snd                    81920  21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
aesni_intel           167936  0
soundcore              16384  1 snd
aes_x86_64             20480  1 aesni_intel
lrw                    16384  1 aesni_intel
mei_me                 32768  0
ie31200_edac           16384  0
gf128mul               16384  1 lrw
mei                    98304  1 mei_me
edac_core              53248  1 ie31200_edac
shpchp                 36864  0
glue_helper            16384  1 aesni_intel
lpc_ich                24576  0
ablk_helper            16384  1 aesni_intel
cryptd                 20480  2 aesni_intel,ablk_helper
serio_raw              16384  0
8250_fintek            16384  0
mac_hid                16384  0
parport_pc             32768  1
ppdev                  20480  0
lp                     20480  0
parport                49152  3 lp,ppdev,parport_pc
autofs4                40960  2
hid_generic            16384  0
psmouse               126976  0
usbhid                 49152  0
uas                    24576  0
r8169                  81920  0
usb_storage            69632  2 uas
hid                   118784  2 hid_generic,usbhid
pata_acpi              16384  0
mii                    16384  1 r8169
wmi                    20480  1 asus_wmi
video                  36864  1 asus_wmi


dmesg
Kod Seç
  [    0.000000] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.0-19-generic (buildd@lgw01-28) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #23-Ubuntu SMP Wed Nov 11 11:39:30 UTC 2015 (Ubuntu 4.2.0-19.23-generic 4.2.6)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-19-generic.efi.signed root=UUID=d84e260d-f40d-4b72-b50b-5b6f85c77472 ro ipv6.disable=1 quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000de94efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000de94f000-0x00000000deb8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000deb90000-0x00000000debd2fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000debd3000-0x00000000dec02fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dec03000-0x00000000dec16fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000dec17000-0x00000000df140fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000df141000-0x00000000df395fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df396000-0x00000000df3a1fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000df3a2000-0x00000000df3c0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df3c1000-0x00000000df3c5fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000df3c6000-0x00000000df408fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df409000-0x00000000df7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0xdf396000  ACPI 2.0=0xdf396000  SMBIOS=0xdec27f98  MPS=0xfc960
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: System manufacturer System Product Name/P8H61-M LX, BIOS 4601 09/18/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FF0000000 write-back
[    0.000000]   2 base 210000000 mask FF8000000 write-back
[    0.000000]   3 base 218000000 mask FFC000000 write-back
[    0.000000]   4 base 21C000000 mask FFE000000 write-back
[    0.000000]   5 base 21E000000 mask FFF000000 write-back
[    0.000000]   6 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 8GB, type WB
[    0.000000] reg 1, base: 8GB, range: 256MB, type WB
[    0.000000] reg 2, base: 8448MB, range: 128MB, type WB
[    0.000000] reg 3, base: 8576MB, range: 64MB, type WB
[    0.000000] reg 4, base: 8640MB, range: 32MB, type WB
[    0.000000] reg 5, base: 8672MB, range: 16MB, type WB
[    0.000000] reg 6, base: 3584MB, range: 512MB, type UC
[    0.000000] total RAM covered: 8176M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 32M num_reg: 6  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 512MB, type WB
[    0.000000] reg 3, base: 4GB, range: 4GB, type WB
[    0.000000] reg 4, base: 8GB, range: 512MB, type WB
[    0.000000] reg 5, base: 8688MB, range: 16MB, type UC
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcc50-0x000fcc5f] mapped at [ffff8800000fcc50]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x0eff0000, 0x0eff0fff] PGTABLE
[    0.000000] BRK [0x0eff1000, 0x0eff1fff] PGTABLE
[    0.000000] BRK [0x0eff2000, 0x0eff2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x21ee00000-0x21effffff]
[    0.000000]  [mem 0x21ee00000-0x21effffff] page 2M
[    0.000000] BRK [0x0eff3000, 0x0eff3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x200000000-0x21edfffff]
[    0.000000]  [mem 0x200000000-0x21edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x1e0000000-0x1ffffffff]
[    0.000000]  [mem 0x1e0000000-0x1ffffffff] page 2M
[    0.000000] BRK [0x0eff4000, 0x0eff4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0xde94efff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xde7fffff] page 2M
[    0.000000]  [mem 0xde800000-0xde94efff] page 4k
[    0.000000] init_memory_mapping: [mem 0xdf409000-0xdf7fffff]
[    0.000000]  [mem 0xdf409000-0xdf5fffff] page 4k
[    0.000000]  [mem 0xdf600000-0xdf7fffff] page 2M
[    0.000000] BRK [0x0eff5000, 0x0eff5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1dfffffff]
[    0.000000]  [mem 0x100000000-0x1dfffffff] page 2M
[    0.000000] RAMDISK: [mem 0x34798000-0x363c3fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000DF396000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DF396078 00006C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DF3A0330 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DF396180 00A1AE (v02 ALASKA A M I    00000015 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000DF3BFF80 000040
[    0.000000] ACPI: APIC 0x00000000DF3A0428 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000DF3A04C0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DF3A0500 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DF3A0538 000495 (v01 IdeRef IdeTable 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000DF3A09D0 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DF3A1380 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: DMAR 0x00000000DF3A1E18 000078 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.000000] ACPI: BGRT 0x00000000DF3A1EE8 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21eff4000-0x21eff8fff]
[    0.000000]  [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216600000-ffff88021e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000de94efff]
[    0.000000]   node   0: [mem 0x00000000df409000-0x00000000df7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[    0.000000] On node 0 totalpages: 2088164
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 27 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14198 pages used for memmap
[    0.000000]   DMA32 zone: 908614 pages, LIFO batch:31
[    0.000000]   Normal zone: 18368 pages used for memmap
[    0.000000]   Normal zone: 1175552 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xde94f000-0xdeb8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdeb90000-0xdebd2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdebd3000-0xdec02fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdec03000-0xdec16fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdec17000-0xdf140fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf141000-0xdf395fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf396000-0xdf3a1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf3a2000-0xdf3c0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf3c1000-0xdf3c5fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf3c6000-0xdf408fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88021ec00000 s96728 r8192 d30248 u262144
[    0.000000] pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2055507
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-19-generic.efi.signed root=UUID=d84e260d-f40d-4b72-b50b-5b6f85c77472 ro ipv6.disable=1 quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7924036K/8352656K available (8148K kernel code, 1237K rwdata, 3800K rodata, 1460K init, 1292K bss, 428620K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] Build-time adjustment of leaf fanout to 64.
[    0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:16640 nr_irqs:488 16
[    0.000000] Offload RCU callbacks from all CPUs
[    0.000000] Offload RCU callbacks from CPUs: 0-7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3392.434 MHz processor
[    0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.86 BogoMIPS (lpj=13569736)
[    0.000029] pid_max: default: 32768 minimum: 301
[    0.000033] ACPI: Core revision 20150619
[    0.004553] ACPI: All ACPI Tables successfully acquired
[    0.019465] Security Framework initialized
[    0.019473] AppArmor: AppArmor initialized
[    0.019474] Yama: becoming mindful.
[    0.019826] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.021283] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.021931] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.021937] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.022098] Initializing cgroup subsys blkio
[    0.022100] Initializing cgroup subsys memory
[    0.022106] Initializing cgroup subsys devices
[    0.022107] Initializing cgroup subsys freezer
[    0.022109] Initializing cgroup subsys net_cls
[    0.022110] Initializing cgroup subsys perf_event
[    0.022112] Initializing cgroup subsys net_prio
[    0.022113] Initializing cgroup subsys hugetlb
[    0.022130] CPU: Physical Processor ID: 0
[    0.022131] CPU: Processor Core ID: 0
[    0.022135] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.022135] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.022396] mce: CPU supports 9 MCE banks
[    0.022406] CPU0: Thermal monitoring enabled (TM1)
[    0.022411] process: using mwait in idle threads
[    0.022413] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.022414] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.022727] Freeing SMP alternatives memory: 28K (ffffffff81ea4000 - ffffffff81eab000)
[    0.024310] Ignoring BGRT: invalid status 0 (expected 1)
[    0.027638] ftrace: allocating 30910 entries in 121 pages
[    0.038096] DMAR: Host address width 36
[    0.038097] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[    0.038104] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.038105] DMAR: RMRR base: 0x000000df0d6000 end: 0x000000df0e4fff
[    0.038107] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed90000 IOMMU 0
[    0.038107] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[    0.038109] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.038260] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.038261] x2apic enabled
[    0.038265] Switched APIC routing to cluster x2apic.
[    0.038654] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.078360] TSC deadline timer enabled
[    0.078362] smpboot: CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
[    0.078381] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.078396] ... version:                3
[    0.078396] ... bit width:              48
[    0.078397] ... generic registers:      4
[    0.078397] ... value mask:             0000ffffffffffff
[    0.078398] ... max period:             0000ffffffffffff
[    0.078399] ... fixed-purpose events:   3
[    0.078399] ... event mask:             000000070000000f
[    0.078981] x86: Booting SMP configuration:
[    0.078983] .... node  #0, CPUs:      #1
[    0.080248] microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29
[    0.082683] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.082755]  #2
[    0.084019] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29
[    0.086442]  #3
[    0.087707] microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29
[    0.090134]  #4 #5 #6 #7
[    0.104057] x86: Booted up 1 node, 8 CPUs
[    0.104059] smpboot: Total of 8 processors activated (54278.94 BogoMIPS)
[    0.110624] devtmpfs: initialized
[    0.112474] evm: security.selinux
[    0.112475] evm: security.SMACK64
[    0.112475] evm: security.SMACK64EXEC
[    0.112476] evm: security.SMACK64TRANSMUTE
[    0.112477] evm: security.SMACK64MMAP
[    0.112477] evm: security.ima
[    0.112478] evm: security.capability
[    0.112523] PM: Registering ACPI NVS region [mem 0xdf141000-0xdf395fff] (2445312 bytes)
[    0.112543] PM: Registering ACPI NVS region [mem 0xdf3a2000-0xdf3c0fff] (126976 bytes)
[    0.112545] PM: Registering ACPI NVS region [mem 0xdf3c6000-0xdf408fff] (274432 bytes)
[    0.112605] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.112665] pinctrl core: initialized pinctrl subsystem
[    0.112746] RTC time: 20:26:08, date: 12/17/15
[    0.112822] NET: Registered protocol family 16
[    0.118472] cpuidle: using governor ladder
[    0.122474] cpuidle: using governor menu
[    0.122564] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.122565] ACPI: bus type PCI registered
[    0.122566] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.122614] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.122615] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.122622] PCI: Using configuration type 1 for base access
[    0.122853] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.126740] ACPI: Added _OSI(Module Device)
[    0.126742] ACPI: Added _OSI(Processor Device)
[    0.126743] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.126743] ACPI: Added _OSI(Processor Aggregator Device)
[    0.128531] ACPI: Executed 1 blocks of module-level executable AML code
[    0.130138] ACPI: Dynamic OEM Table Load:
[    0.130143] ACPI: SSDT 0xFFFF88021493A000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.130485] ACPI: Dynamic OEM Table Load:
[    0.130488] ACPI: SSDT 0xFFFF8802148D5800 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.130779] ACPI: Dynamic OEM Table Load:
[    0.130781] ACPI: SSDT 0xFFFF8802148CEC00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.131724] ACPI: Interpreter enabled
[    0.131731] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[    0.131739] ACPI: (supports S0 S1 S3 S4 S5)
[    0.131740] ACPI: Using IOAPIC for interrupt routing
[    0.131757] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.135322] ACPI: Power Resource [FN00] (off)
[    0.135375] ACPI: Power Resource [FN01] (off)
[    0.135428] ACPI: Power Resource [FN02] (off)
[    0.135479] ACPI: Power Resource [FN03] (off)
[    0.135530] ACPI: Power Resource [FN04] (off)
[    0.135919] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.135923] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.135994] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.136057] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.136058] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.136299] PCI host bridge to bus 0000:00
[    0.136301] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.136302] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.136303] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.136305] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.136306] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.136307] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.136308] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.136309] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.136310] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.136315] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[    0.136371] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.136393] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.136415] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.136464] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.136493] pci 0000:00:16.0: reg 0x10: [mem 0xf7f09000-0xf7f0900f 64bit]
[    0.136547] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.136603] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.136629] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f07000-0xf7f073ff]
[    0.136691] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.136725] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.136754] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.136776] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f00000-0xf7f03fff 64bit]
[    0.136820] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.136845] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.136873] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.136936] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.136963] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.136991] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    0.137055] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.137081] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.137112] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.137138] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f06000-0xf7f063ff]
[    0.137200] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.137233] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.137260] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.137393] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
[    0.137410] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[    0.137417] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[    0.137423] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[    0.137430] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[    0.137436] pci 0000:00:1f.2: reg 0x20: [io  0xf090-0xf09f]
[    0.137442] pci 0000:00:1f.2: reg 0x24: [io  0xf080-0xf08f]
[    0.137499] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.137514] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f05000-0xf7f050ff 64bit]
[    0.137532] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.137589] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
[    0.137607] pci 0000:00:1f.5: reg 0x10: [io  0xf070-0xf077]
[    0.137613] pci 0000:00:1f.5: reg 0x14: [io  0xf060-0xf063]
[    0.137620] pci 0000:00:1f.5: reg 0x18: [io  0xf050-0xf057]
[    0.137626] pci 0000:00:1f.5: reg 0x1c: [io  0xf040-0xf043]
[    0.137632] pci 0000:00:1f.5: reg 0x20: [io  0xf030-0xf03f]
[    0.137639] pci 0000:00:1f.5: reg 0x24: [io  0xf020-0xf02f]
[    0.137720] pci 0000:01:00.0: [1002:68b9] type 00 class 0x030000
[    0.137736] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.137743] pci 0000:01:00.0: reg 0x18: [mem 0xf7e20000-0xf7e3ffff 64bit]
[    0.137748] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.137756] pci 0000:01:00.0: reg 0x30: [mem 0xf7e00000-0xf7e1ffff pref]
[    0.137771] pci 0000:01:00.0: supports D1 D2
[    0.137798] pci 0000:01:00.1: [1002:aa58] type 00 class 0x040300
[    0.137813] pci 0000:01:00.1: reg 0x10: [mem 0xf7e40000-0xf7e43fff 64bit]
[    0.137840] pci 0000:01:00.1: supports D1 D2
[    0.142504] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.142508] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.142511] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.142516] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.142572] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.142637] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.142683] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.142715] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.142736] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.142809] pci 0000:03:00.0: supports D1 D2
[    0.142810] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.142838] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.150518] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.150523] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.150533] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.150915] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 10 *11 12 14 15)
[    0.150947] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *10 11 12 14 15)
[    0.150978] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[    0.151007] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 10 11 12 14 15)
[    0.151037] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 10 11 12 14 15) *0, disabled.
[    0.151069] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 10 11 12 14 *15)
[    0.151101] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 10 *11 12 14 15)
[    0.151132] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 10 11 12 *14 15)
[    0.151295] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.151357] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.151359] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.151360] vgaarb: loaded
[    0.151360] vgaarb: bridge control possible 0000:01:00.0
[    0.151531] SCSI subsystem initialized
[    0.151554] libata version 3.00 loaded.
[    0.151569] ACPI: bus type USB registered
[    0.151581] usbcore: registered new interface driver usbfs
[    0.151587] usbcore: registered new interface driver hub
[    0.151601] usbcore: registered new device driver usb
[    0.151728] PCI: Using ACPI for IRQ routing
[    0.153156] PCI: pci_cache_line_size set to 64 bytes
[    0.153189] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.153190] e820: reserve RAM buffer [mem 0xde94f000-0xdfffffff]
[    0.153191] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[    0.153192] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[    0.153264] NetLabel: Initializing
[    0.153265] NetLabel:  domain hash size = 128
[    0.153265] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.153273] NetLabel:  unlabeled traffic allowed by default
[    0.153327] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.153330] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.156353] clocksource: Switched to clocksource hpet
[    0.160236] AppArmor: AppArmor Filesystem Enabled
[    0.160278] pnp: PnP ACPI init
[    0.160340] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.160343] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.160400] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.160401] system 00:01: [io  0x0200-0x020f] has been reserved
[    0.160403] system 00:01: [io  0xffff] has been reserved
[    0.160404] system 00:01: [io  0xffff] has been reserved
[    0.160405] system 00:01: [io  0x0400-0x0453] could not be reserved
[    0.160406] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.160407] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.160409] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.160411] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.160427] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.160457] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.160459] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.160510] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.160512] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.160672] pnp 00:05: [dma 0 disabled]
[    0.160730] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.160762] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.160764] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.160894] pnp 00:07: [dma 0 disabled]
[    0.160924] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.161044] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.161045] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.161046] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.161048] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.161049] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.161050] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.161051] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.161053] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.161054] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.161055] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.161056] system 00:08: [mem 0xf0100000-0xf0100fff] has been reserved
[    0.161058] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.161129] pnp: PnP ACPI: found 9 devices
[    0.166866] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.166889] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.166891] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.166893] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.166895] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.166897] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.166907] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.166909] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.166914] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.166920] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.166921] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.166922] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.166924] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.166925] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.166926] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.166927] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.166928] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff window]
[    0.166929] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.166930] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
[    0.166931] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.166933] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.166934] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.166955] NET: Registered protocol family 2
[    0.167068] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.167172] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.167291] TCP: Hash tables configured (established 65536 bind 65536)
[    0.167309] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.167331] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.167374] NET: Registered protocol family 1
[    0.420566] pci 0000:01:00.0: Video device with shadowed ROM
[    0.420572] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.420608] Trying to unpack rootfs image as initramfs...
[    0.740364] Freeing initrd memory: 28848K (ffff880034798000 - ffff8800363c4000)
[    0.740385] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.740386] software IO TLB [mem 0xda94f000-0xde94f000] (64MB) mapped at [ffff8800da94f000-ffff8800de94efff]
[    0.740452] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.740453] hw unit of domain pp0-core 2^-16 Joules
[    0.740453] hw unit of domain package 2^-16 Joules
[    0.740454] hw unit of domain pp1-gpu 2^-16 Joules
[    0.740565] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1b
[    0.740570] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1b
[    0.740575] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x1b
[    0.740580] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x1b
[    0.740585] microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x1b
[    0.740591] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x1b
[    0.740596] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x1b
[    0.740601] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x1b
[    0.740660] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.740717] Scanning for low memory corruption every 60 seconds
[    0.740956] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.740978] Initialise system trusted keyring
[    0.740995] audit: initializing netlink subsys (disabled)
[    0.741008] audit: type=2000 audit(1450383967.724:1): initialized
[    0.741285] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.742256] zpool: loaded
[    0.742258] zbud: loaded
[    0.742377] VFS: Disk quotas dquot_6.6.0
[    0.742399] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.742698] fuse init (API version 7.23)
[    0.742792] Key type big_key registered
[    0.743032] Key type asymmetric registered
[    0.743033] Asymmetric key parser 'x509' registered
[    0.743042] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.743079] io scheduler noop registered
[    0.743081] io scheduler deadline registered (default)
[    0.743100] io scheduler cfq registered
[    0.743421] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.743426] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.743449] efifb: probing for efifb
[    0.743457] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90001000000, using 1920k, total 1920k
[    0.743458] efifb: mode is 800x600x32, linelength=3200, pages=1
[    0.743458] efifb: scrolling: redraw
[    0.743459] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.743513] Console: switching to colour frame buffer device 100x37
[    0.743522] fb0: EFI VGA frame buffer device
[    0.743528] intel_idle: MWAIT substates: 0x1120
[    0.743529] intel_idle: v0.4 model 0x3A
[    0.743530] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.743751] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.743754] ACPI: Power Button [PWRB]
[    0.743778] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.743779] ACPI: Power Button [PWRF]
[    0.744350] thermal LNXTHERM:00: registered as thermal_zone0
[    0.744351] ACPI: Thermal Zone [TZ00] (28 C)
[    0.744503] thermal LNXTHERM:01: registered as thermal_zone1
[    0.744504] ACPI: Thermal Zone [TZ01] (30 C)
[    0.744527] GHES: HEST is not enabled!
[    0.744588] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.765022] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.766060] Linux agpgart interface v0.103
[    0.767881] brd: module loaded
[    0.768516] loop: module loaded
[    0.768622] ata_piix 0000:00:1f.2: version 2.13
[    0.768681] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.925031] scsi host0: ata_piix
[    0.925154] scsi host1: ata_piix
[    0.925179] ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19
[    0.925182] ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19
[    0.925233] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.080816] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[    1.081029] scsi host2: ata_piix
[    1.081133] scsi host3: ata_piix
[    1.081169] ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19
[    1.081170] ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19
[    1.081227] libphy: Fixed MDIO Bus: probed
[    1.081229] tun: Universal TUN/TAP device driver, 1.6
[    1.081229] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.081317] PPP generic driver version 2.4.2
[    1.081413] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.081421] ehci-pci: EHCI PCI platform driver
[    1.081498] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.081503] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.081513] ehci-pci 0000:00:1a.0: debug port 2
[    1.085414] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.085424] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7f07000
[    1.096803] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.096836] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.096838] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.096839] usb usb1: Product: EHCI Host Controller
[    1.096840] usb usb1: Manufacturer: Linux 4.2.0-19-generic ehci_hcd
[    1.096841] usb usb1: SerialNumber: 0000:00:1a.0
[    1.096983] hub 1-0:1.0: USB hub found
[    1.096990] hub 1-0:1.0: 2 ports detected
[    1.097139] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.097143] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.097152] ehci-pci 0000:00:1d.0: debug port 2
[    1.101046] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.101049] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f06000
[    1.112824] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.112867] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.112868] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.112869] usb usb2: Product: EHCI Host Controller
[    1.112870] usb usb2: Manufacturer: Linux 4.2.0-19-generic ehci_hcd
[    1.112871] usb usb2: SerialNumber: 0000:00:1d.0
[    1.113031] hub 2-0:1.0: USB hub found
[    1.113038] hub 2-0:1.0: 2 ports detected
[    1.113124] ehci-platform: EHCI generic platform driver
[    1.113131] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.113134] ohci-pci: OHCI PCI platform driver
[    1.113141] ohci-platform: OHCI generic platform driver
[    1.113146] uhci_hcd: USB Universal Host Controller Interface driver
[    1.113177] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.115629] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.115634] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.115907] mousedev: PS/2 mouse device common for all mice
[    1.116259] rtc_cmos 00:02: RTC can wake from S4
[    1.116415] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.116444] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.116452] i2c /dev entries driver
[    1.116503] device-mapper: uevent: version 1.0.3
[    1.116567] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[    1.116579] Intel P-state driver initializing.
[    1.116841] ledtrig-cpu: registered to indicate activity on CPUs
[    1.116846] EFI Variables Facility v0.08 2004-May-17
[    1.190644] PCCT header not found.
[    1.190728] IPv6: Loaded, but administratively disabled, reboot required to enable
[    1.190731] NET: Registered protocol family 17
[    1.190748] Key type dns_resolver registered
[    1.191116] Loading compiled-in X.509 certificates
[    1.191685] Loaded X.509 cert 'Build time autogenerated kernel key: 36c9ddeec2968bfcda6740d7cd684bf04b702794'
[    1.191696] registered taskstats version 1
[    1.191707] zswap: loading zswap
[    1.191708] zswap: using zbud pool
[    1.191711] zswap: using lzo compressor
[    1.193467] Key type trusted registered
[    1.196733] Key type encrypted registered
[    1.196738] AppArmor: AppArmor sha1 policy hashing enabled
[    1.196741] ima: No TPM chip found, activating TPM-bypass!
[    1.196755] evm: HMAC attrs: 0x1
[    1.197070]   Magic number: 11:810:447
[    1.197177] rtc_cmos 00:02: setting system clock to 2015-12-17 20:26:09 UTC (1450383969)
[    1.197249] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.197249] EDD information not available.
[    1.197306] PM: Hibernation image not present or could not be loaded.
[    1.408963] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.424970] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.541787] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.541789] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.542214] hub 1-1:1.0: USB hub found
[    1.542413] hub 1-1:1.0: 4 ports detected
[    1.557668] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.557670] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.558065] hub 2-1:1.0: USB hub found
[    1.558298] hub 2-1:1.0: 6 ports detected
[    1.737116] tsc: Refined TSC clocksource calibration: 3392.293 MHz
[    1.737121] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5de2a436, max_idle_ns: 440795285127 ns
[    1.813148] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[    1.829157] usb 2-1.3: new low-speed USB device number 3 using ehci-pci
[    1.907408] usb 1-1.3: New USB device found, idVendor=03f0, idProduct=1a40
[    1.907412] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.907415] usb 1-1.3: Product: v285w
[    1.907417] usb 1-1.3: Manufacturer: HP
[    1.907419] usb 1-1.3: SerialNumber: AA00000000022440
[    1.940215] usb 2-1.3: New USB device found, idVendor=04d9, idProduct=1702
[    1.940217] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.940218] usb 2-1.3: Product: USB Keyboard
[    1.940219] usb 2-1.3: Manufacturer: 
[    2.013242] usb 2-1.4: new low-speed USB device number 4 using ehci-pci
[    2.110791] usb 2-1.4: New USB device found, idVendor=1bcf, idProduct=0005
[    2.110793] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.110794] usb 2-1.4: Product: USB Optical Mouse
[    2.273369] ata2.01: failed to resume link (SControl 0)
[    2.277368] ata1.01: failed to resume link (SControl 0)
[    2.429500] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[    2.429513] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.429522] ata2.01: link offline, clearing class 3 to NONE
[    2.433502] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[    2.433512] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.437674] ata2.00: ATAPI: ASUS     DRW-24F1ST   a, 1.00, max UDMA/100
[    2.442013] ata1.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
[    2.442017] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.453674] ata2.00: configured for UDMA/100
[    2.458017] ata1.00: configured for UDMA/133
[    2.458257] scsi 0:0:0:0: Direct-Access     ATA      ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
[    2.458582] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.458619] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.458622] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.458826] sd 0:0:0:0: [sda] Write Protect is off
[    2.458838] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.458963] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.459663] scsi 1:0:0:0: CD-ROM            ASUS     DRW-24F1ST   a   1.00 PQ: 0 ANSI: 5
[    2.479031] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.479033] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.479141] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.479248] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.506290]  sda: sda1 sda2 sda3
[    2.506992] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.507275] Freeing unused kernel memory: 1460K (ffffffff81d37000 - ffffffff81ea4000)
[    2.507277] Write protecting the kernel read-only data: 12288k
[    2.507462] Freeing unused kernel memory: 32K (ffff88000e7f8000 - ffff88000e800000)
[    2.507543] Freeing unused kernel memory: 296K (ffff88000ebb6000 - ffff88000ec00000)
[    2.513827] random: systemd-udevd urandom read with 21 bits of entropy available
[    2.537367] wmi: Mapper loaded
[    2.540392] hidraw: raw HID events driver (C) Jiri Kosina
[    2.540649] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[    2.540713] scsi host4: usb-storage 1-1.3:1.0
[    2.540783] usbcore: registered new interface driver usb-storage
[    2.540919] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.540926] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.541430] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c6a000, 54:04:a6:84:52:06, XID 0c900800 IRQ 26
[    2.541432] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.541836] usbcore: registered new interface driver uas
[    2.556917] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    2.568164] usbcore: registered new interface driver usbhid
[    2.568165] usbhid: USB HID core driver
[    2.569381] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:04D9:1702.0001/input/input5
[    2.621665] hid-generic 0003:04D9:1702.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.0-1.3/input0
[    2.623645] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:04D9:1702.0002/input/input6
[    2.677813] hid-generic 0003:04D9:1702.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.0-1.3/input1
[    2.677907] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:1BCF:0005.0003/input/input7
[    2.678172] hid-generic 0003:1BCF:0005.0003: input,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.4/input0
[    2.737814] clocksource: Switched to clocksource tsc
[    3.228727] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.027038] scsi 4:0:0:0: Direct-Access     hp       v285w            1100 PQ: 0 ANSI: 4
[    4.027367] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    4.028149] sd 4:0:0:0: [sdb] 15950592 512-byte logical blocks: (8.16 GB/7.60 GiB)
[    4.028824] sd 4:0:0:0: [sdb] Write Protect is off
[    4.028826] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    4.029587] sd 4:0:0:0: [sdb] No Caching mode page found
[    4.029593] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    4.033578] random: nonblocking pool is initialized
[    4.033652]  sdb: sdb1
[    4.036304] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    4.184384] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[    4.814475] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    4.814620] systemd[1]: Detected architecture x86-64.
[    4.823074] systemd[1]: Set hostname to <kadir>.
[    5.474567] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.474657] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.474666] systemd[1]: Reached target User and Group Name Lookups.
[    5.474684] systemd[1]: Created slice Root Slice.
[    5.474704] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.474751] systemd[1]: Created slice User and Session Slice.
[    5.474772] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.474791] systemd[1]: Listening on udev Control Socket.
[    5.474797] systemd[1]: Reached target Remote File Systems (Pre).
[    5.474818] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.474838] systemd[1]: Listening on Journal Socket.
[    5.474887] systemd[1]: Created slice System Slice.
[    5.522170] systemd[1]: Started Read required files in advance.
[    5.522371] systemd[1]: Created slice system-getty.slice.
[    5.522693] systemd[1]: Starting Uncomplicated firewall...
[    5.522754] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    5.523075] systemd[1]: Mounting Debug File System...
[    5.523370] systemd[1]: Starting Increase datagram queue length...
[    5.523685] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.523710] systemd[1]: Reached target Slices.
[    5.523999] systemd[1]: Starting Setup Virtual Console...
[    5.524008] systemd[1]: Reached target Encrypted Volumes.
[    5.524050] systemd[1]: Listening on udev Kernel Socket.
[    5.524343] systemd[1]: Starting udev Coldplug all Devices...
[    5.524619] systemd[1]: Mounting POSIX Message Queue File System...
[    5.524669] systemd[1]: Listening on Journal Audit Socket.
[    5.524971] systemd[1]: Started Braille Device Support.
[    5.691727] systemd[1]: Starting Load Kernel Modules...
[    5.692033] systemd[1]: Mounting Huge Pages File System...
[    5.709454] systemd[1]: Started Setup Virtual Console.
[    5.855530] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    5.855893] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.028657] systemd[1]: Mounted Debug File System.
[    6.028689] systemd[1]: Mounted POSIX Message Queue File System.
[    6.028716] systemd[1]: Mounted Huge Pages File System.
[    6.029148] systemd[1]: Started Increase datagram queue length.
[    6.032047] systemd[1]: Listening on Syslog Socket.
[    6.032366] systemd[1]: Starting Journal Service...
[    6.064196] systemd[1]: Started Uncomplicated firewall.
[    6.119620] systemd[1]: Started udev Coldplug all Devices.
[    6.446334] lp: driver loaded but no devices found
[    6.459334] ppdev: user-space parallel port driver
[    6.509820] parport_pc 00:05: reported by Plug and Play ACPI
[    6.509879] parport0: PC-style at 0x378, irq 5 [PCSPP]
[    6.603392] lp0: using parport0 (interrupt-driven).
[    6.657212] systemd[1]: Started Load Kernel Modules.
[    6.657604] systemd[1]: Starting Apply Kernel Variables...
[    6.657943] systemd[1]: Mounting FUSE Control File System...
[    6.659150] systemd[1]: Mounted FUSE Control File System.
[    6.759223] systemd[1]: Started Journal Service.
[    8.145056] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    8.305826] systemd-journald[274]: Received request to flush runtime journal from PID 1
[    8.444404] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150619/utaddress-254)
[    8.444408] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.444411] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[    8.444413] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPCB.GPBX) (20150619/utaddress-254)
[    8.444415] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.444416] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[    8.444417] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPCB.GPBX) (20150619/utaddress-254)
[    8.444419] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.444420] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[    8.444421] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPCB.GPBX) (20150619/utaddress-254)
[    8.444423] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000050F (\_GPE.GPIO) (20150619/utaddress-254)
[    8.444425] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.444425] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.534072] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.561040] EDAC MC: Ver: 3.0.0
[    8.905049] AVX version of gcm_enc/dec engaged.
[    8.905051] AES CTR mode by8 optimization enabled
[    9.002609] asus_wmi: ASUS WMI generic driver loaded
[    9.083755] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    9.083757] AMD IOMMUv2 functionality not available on this system
[    9.087760] asus_wmi: Initialization: 0x0
[    9.087772] asus_wmi: BIOS WMI version: 0.9
[    9.087793] asus_wmi: SFUN value: 0x0
[    9.087953] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8
[    9.088004] asus_wmi: Number of fans: 1
[    9.660938] kvm: disabled by bios
[    9.685412] kvm: disabled by bios
[    9.713242] kvm: disabled by bios
[    9.737213] kvm: disabled by bios
[    9.769343] kvm: disabled by bios
[    9.801807] kvm: disabled by bios
[    9.949230] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    9.949398] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[    9.949426] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   10.038481] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[   10.112281] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   10.112283] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.112284] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   10.112285] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   10.112286] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[   10.112287] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   10.112288] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   10.112289] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   10.112290] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   10.123669] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   10.123705] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   10.123737] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   10.123769] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   10.123800] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   10.423258] intel_rapl: Found RAPL domain package
[   10.423260] intel_rapl: Found RAPL domain core
[   12.384068] Adding 8352764k swap on /dev/sda3.  Priority:-1 extents:1 across:8352764k FS
[   12.431420] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   12.431421] Disabling lock debugging due to kernel taint
[   12.435283] fglrx: module verification failed: signature and/or required key missing - tainting kernel
[   12.450209] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7716 MBytes.
[   12.450276] <6>[fglrx]   vendor: 1002 device: 68b9 revision: 0 count: 1
[   12.450396] <6>[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[   12.450523] <6>[fglrx] Kernel PAT support is enabled
[   12.450532] <6>[fglrx] module loaded - fglrx 15.20.3 [Sep  8 2015] with 1 minors
[   16.671898] audit: type=1400 audit(1450383984.963:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=538 comm="apparmor_parser"
[   16.671903] audit: type=1400 audit(1450383984.963:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=538 comm="apparmor_parser"
[   16.858689] audit: type=1400 audit(1450383985.151:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=538 comm="apparmor_parser"
[   16.858694] audit: type=1400 audit(1450383985.151:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=538 comm="apparmor_parser"
[   16.858697] audit: type=1400 audit(1450383985.151:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=538 comm="apparmor_parser"
[   16.858699] audit: type=1400 audit(1450383985.151:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=538 comm="apparmor_parser"
[   16.992987] audit: type=1400 audit(1450383985.283:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=538 comm="apparmor_parser"
[   17.287668] audit: type=1400 audit(1450383985.579:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=538 comm="apparmor_parser"
[   17.287675] audit: type=1400 audit(1450383985.579:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=538 comm="apparmor_parser"
[   17.287679] audit: type=1400 audit(1450383985.579:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=538 comm="apparmor_parser"
[   20.788043] cgroup: new mount options do not match the existing superblock, will be ignored
[   24.513678] r8169 0000:03:00.0 enp3s0: link down
[   24.513697] r8169 0000:03:00.0 enp3s0: link down
[   26.447841] r8169 0000:03:00.0 enp3s0: link up
[   26.599169] <6>[fglrx] Firegl kernel thread PID: 803
[   26.599280] <6>[fglrx] Firegl kernel thread PID: 804
[   26.599389] <6>[fglrx] Firegl kernel thread PID: 805
[   26.599469] <6>[fglrx] IRQ 30 Enabled
[   26.614676] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[   26.614678] <6>[fglrx] Reserved FB block: Unshared offset:f7b4000, size:4000
[   26.614678] <6>[fglrx] Reserved FB block: Unshared offset:f7b8000, size:548000
[   26.614679] <6>[fglrx] Reserved FB block: Unshared offset:7fff3000, size:d000
[  209.086423] r8169 0000:03:00.0 enp3s0: link down
[  223.884278] r8169 0000:03:00.0 enp3s0: link up
[  234.348049] r8169 0000:03:00.0 enp3s0: link down
[  239.284663] r8169 0000:03:00.0 enp3s0: link up



dmesg | tail
Kod Seç
[   26.599389] <6>[fglrx] Firegl kernel thread PID: 805
[   26.599469] <6>[fglrx] IRQ 30 Enabled
[   26.614676] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[   26.614678] <6>[fglrx] Reserved FB block: Unshared offset:f7b4000, size:4000
[   26.614678] <6>[fglrx] Reserved FB block: Unshared offset:f7b8000, size:548000
[   26.614679] <6>[fglrx] Reserved FB block: Unshared offset:7fff3000, size:d000
[  209.086423] r8169 0000:03:00.0 enp3s0: link down
[  223.884278] r8169 0000:03:00.0 enp3s0: link up
[  234.348049] r8169 0000:03:00.0 enp3s0: link down
[  239.284663] r8169 0000:03:00.0 enp3s0: link up
 

D@bbe

#5
18 Aralık 2015 - 01:36:34
saldırı?  hiç belli değil... bence ttnet her zamanki performansında... ;)

poʍǝɹǝd bʎ ɔɐspǝɹ˙˙˙

plazma

#6
18 Aralık 2015 - 02:32:41
Kablolu internet derken Uydunet mi yoksa ethernet anlamında söylediniz?

heartsmagic

#7
19 Aralık 2015 - 03:37:28
Alıntı Yapbağımlılık sağlanmadı:libwxbase2.8.0(>=2.8.12.1) hatası
dediğimiz şeyin internet bağlantısı ile ilgisi yok.

Kod Seç
sudo apt-get update
sudo apt-get upgrade

çıktılarını geç lütfen buraya.
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.

kadir.uysal57

#8
19 Aralık 2015 - 15:16:31
Alıntı yapılan: heartsmagic - 19 Aralık 2015 - 03:37:28
Alıntı Yapbağımlılık sağlanmadı:libwxbase2.8.0(>=2.8.12.1) hatası
dediğimiz şeyin internet bağlantısı ile ilgisi yok.

Kod Seç
sudo apt-get update
sudo apt-get upgrade

çıktılarını geç lütfen buraya.
gerek kalmadı teşekkür ederim

Reverser

#9
20 Aralık 2015 - 00:54:28
@kadir.uysal57, son durum ne şimdi ?

XFCE ROCKS !
Powered by Thunar & XFWM4

Yazdır
Yukarı git Sayfa1
Kullanıcı Eylemleri