Linux Kernel 3.16.0-38-generic Realtek Modülü Düzgün Çalışmıyor

[spider909]

Herkese merhaba arkadaşlar. Ben Linux mint kullanıyorum her şeyiyle neredeyse mükemmel bir işletim sistemi gerçekten ama emin olamadığım şekilde kernel modülü ile ilgili bir sıkıntı olduğundan şüpheleniyorum. Sorun şu ki bilgisayar başladığında ağa her zaman otomatik bağlanamıyor. Ağ bulunamadı gibi hata veriyor. Kabloyu çıkartıp takınca bazen çözülüyor bazen çözülmüyor. Bazen restart atınca çözülüyor. Sanki bir başlangıç sinyaline denk getirmem gerekiyor gibi geldi bana ama emin değilim tabiiki. Araştırdım bu konuda Realtek in kernel modülü ile ilgili sorun olabileceğini okudum internette çünkü aynı sorun sadece Linux Mint'de değil Ubuntu kurunca da karşıma çıkıyor. Sonuçta aynı kernel kullanıldığı için. Gittm en son kernel modülünü indirdim Realtek'in sitesinden onu kurdum yine bir işe yaramadı aynı hata devam ediyor. Downgrade edebileceğimi söylemişler eski bir modül de bulamadım internette açıkcası kendi sitelerinde en azından. Çünkü eski linux sürümlerinde böyle bir sorunla karşılaşmıyordum.

Çıktılar:

Kod Seç Genişlet

torak@torak-GA-MA770T-UD3P ~ $ cat /etc/lsb-release
DISTRIB_ID=LinuxMint
DISTRIB_RELEASE=17.2
DISTRIB_CODENAME=rafaela
DISTRIB_DESCRIPTION="Linux Mint 17.2 Rafaela"
torak@torak-GA-MA770T-UD3P ~ $ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic root=UUID=a8cb3a1e-2d3b-4428-a76e-51a14f608ec1 ro quiet splash acpi=force vt.handoff=7
torak@torak-GA-MA770T-UD3P ~ $ uname -a
Linux torak-GA-MA770T-UD3P 3.16.0-38-generic #52~14.04.1-Ubuntu SMP Fri May 8 09:43:57 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
torak@torak-GA-MA770T-UD3P ~ $ lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RX780/RX790 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RX780/RD790 PCI to PCI bridge (external gfx0 port A)
00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD790 PCI to PCI bridge (PCI express gpp port F)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV770 LE [Radeon HD 4830]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV770 HDMI Audio [Radeon HD 4850/4870]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
03:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
torak@torak-GA-MA770T-UD3P ~ $ sudo lshw -C network
[sudo] password for torak:
  *-network               
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:02:00.0
       logical name: eth0
       version: 02
       serial: 00:24:1d:2e:13:f8
       size: 100Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8168 driverversion=8.040.00-NAPI duplex=full ip=192.168.1.5 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
       resources: irq:42 ioport:de00(size=256) memory:fdbff000-fdbfffff memory:fdbe0000-fdbeffff memory:fde00000-fde0ffff
torak@torak-GA-MA770T-UD3P ~ $ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:24:1d:2e:13:f8 
          inet addr:192.168.1.5  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fd20:8ed:8cee:f900:224:1dff:fe2e:13f8/64 Scope:Global
          inet6 addr: fd20:8ed:8cee:f900:f58c:af01:7bbf:a58e/64 Scope:Global
          inet6 addr: fe80::224:1dff:fe2e:13f8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3547 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3252 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:2994795 (2.9 MB)  TX bytes:528915 (528.9 KB)
          Interrupt:42 Base address:0x4000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:501 errors:0 dropped:0 overruns:0 frame:0
          TX packets:501 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:71925 (71.9 KB)  TX bytes:71925 (71.9 KB)
torak@torak-GA-MA770T-UD3P ~ $ lsmod
Module                  Size  Used by
pci_stub               12622  1
vboxpci                23273  0
vboxnetadp             25670  0
vboxnetflt             27880  0
vboxdrv               446742  3 vboxnetadp,vboxnetflt,vboxpci
joydev                 17393  0
snd_seq_midi           13564  0
snd_seq_midi_event     14899  1 snd_seq_midi
rfcomm                 69509  0
bnep                   19624  2
dm_multipath           22843  0
scsi_dh                14882  1 dm_multipath
bluetooth             446409  10 bnep,rfcomm
snd_rawmidi            30876  1 snd_seq_midi
6lowpan_iphc           18702  1 bluetooth
snd_hda_codec_realtek    77467  1
snd_hda_codec_generic    69011  1 snd_hda_codec_realtek
snd_hda_codec_hdmi     47548  1
kvm                   452088  0
snd_hda_intel          30469  4
snd_hda_controller     30228  1 snd_hda_intel
snd_hda_codec         139682  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep              17698  1 snd_hda_codec
snd_seq                63074  2 snd_seq_midi_event,snd_seq_midi
snd_pcm               104112  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
serio_raw              13483  0
edac_core              56549  0
k10temp                13144  0
edac_mce_amd           22578  0
snd_timer              29562  2 snd_pcm,snd_seq
snd                    79468  19 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
i2c_piix4              22166  0
binfmt_misc            17468  1
soundcore              15047  2 snd,snd_hda_codec
parport_pc             32741  1
mac_hid                13227  0
shpchp                 37047  0
ppdev                  17671  0
lp                     17759  0
parport                42348  3 lp,ppdev,parport_pc
dm_mirror              22135  0
dm_region_hash         20862  1 dm_mirror
dm_log                 18411  2 dm_region_hash,dm_mirror
hid_generic            12559  0
usbhid                 52616  0
hid                   110426  2 hid_generic,usbhid
uas                    23159  0
usb_storage            66545  1 uas
pata_acpi              13053  0
radeon               1412941  3
firewire_ohci          40551  0
psmouse               106610  0
i2c_algo_bit           13413  1 radeon
ahci                   34062  2
firewire_core          68769  1 firewire_ohci
ttm                    93588  1 radeon
libahci                32424  1 ahci
pata_atiixp            13279  0
crc_itu_t              12707  1 firewire_core
drm_kms_helper         61574  1 radeon
drm                   311018  6 ttm,drm_kms_helper,radeon
r8168                 513137  0
wmi                    19193  0

torak@torak-GA-MA770T-UD3P ~ $ dmesg | tail
[   13.960864] ata3.00: failed command: IDENTIFY DEVICE
[   13.960879] ata3.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 28 pio 512 in
[   13.960879]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   13.960887] ata3.00: status: { DRDY }
[   13.960895] ata3: hard resetting link
[   14.452745] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   14.456621] ata3.00: configured for UDMA/133
[   14.456664] ata3: EH complete
[   94.847516] r8168: eth0: link up
[   94.847579] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready





Hepsi sığmadığı için bir kısmını veriyorum dmesg: (eth0 [    6.860168] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready hatasını görebilirsiniz.)

Kod Seç Genişlet

[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfee0000-0xcfee2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfee3000-0xcfeeffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfef0000-0xcfefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88012fc00000 s81408 r8192 d20992 u524288
[    0.000000] pcpu-alloc: s81408 r8192 d20992 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031789
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic root=UUID=a8cb3a1e-2d3b-4428-a76e-51a14f608ec1 ro quiet splash acpi=force vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xc4000000-0xc5ffffff] (32MB)
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[    0.000000] Memory: 3949852K/4192760K available (7626K kernel code, 1131K rwdata, 3596K rodata, 1352K init, 1300K bss, 242908K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] Offload RCU callbacks from all CPUs
[    0.000000] Offload RCU callbacks from CPUs: 0-3.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:16640 nr_irqs:712 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2612.006 MHz processor
[    0.000026] Calibrating delay loop (skipped), value calculated using timer frequency.. 5224.01 BogoMIPS (lpj=10448024)
[    0.000029] pid_max: default: 32768 minimum: 301
[    0.000037] ACPI: Core revision 20140424
[    0.002788] ACPI: All ACPI Tables successfully acquired
[    0.035049] Security Framework initialized
[    0.035069] AppArmor: AppArmor initialized
[    0.035070] Yama: becoming mindful.
[    0.035346] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.036201] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.036652] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.036657] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.036870] Initializing cgroup subsys memory
[    0.036892] Initializing cgroup subsys devices
[    0.036898] Initializing cgroup subsys freezer
[    0.036901] Initializing cgroup subsys net_cls
[    0.036905] Initializing cgroup subsys blkio
[    0.036909] Initializing cgroup subsys perf_event
[    0.036911] Initializing cgroup subsys net_prio
[    0.036918] Initializing cgroup subsys hugetlb
[    0.036938] tseg: 00cff00000
[    0.036941] CPU: Physical Processor ID: 0
[    0.036942] CPU: Processor Core ID: 0
[    0.036944] mce: CPU supports 6 MCE banks
[    0.036949] LVT offset 0 assigned for vector 0xf9
[    0.036953] process: using AMD E400 aware idle routine
[    0.036956] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.036956] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[    0.036956] tlb_flushall_shift: 6
[    0.037058] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[    0.037791] ftrace: allocating 29244 entries in 115 pages
[    0.050391] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.090074] smpboot: CPU0: AMD Phenom(tm) II X3 710 Processor (fam: 10, model: 04, stepping: 02)
[    0.194931] Performance Events: AMD PMU driver.
[    0.194935] ... version:                0
[    0.194936] ... bit width:              48
[    0.194937] ... generic registers:      4
[    0.194938] ... value mask:             0000ffffffffffff
[    0.194939] ... max period:             00007fffffffffff
[    0.194940] ... fixed-purpose events:   0
[    0.194941] ... event mask:             000000000000000f
[    0.196551] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.196628] x86: Booting SMP configuration:
[    0.196629] .... node  #0, CPUs:      #1 #2
[    0.222766] x86: Booted up 1 node, 3 CPUs
[    0.222768] smpboot: Total of 3 processors activated (15672.03 BogoMIPS)
[    0.226480] devtmpfs: initialized
[    0.230858] evm: security.selinux
[    0.230860] evm: security.SMACK64
[    0.230861] evm: security.SMACK64EXEC
[    0.230862] evm: security.SMACK64TRANSMUTE
[    0.230863] evm: security.SMACK64MMAP
[    0.230864] evm: security.ima
[    0.230865] evm: security.capability
[    0.230977] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
[    0.232036] pinctrl core: initialized pinctrl subsystem
[    0.232116] regulator-dummy: no parameters
[    0.232146] RTC time:  9:48:19, date: 11/17/15
[    0.232199] NET: Registered protocol family 16
[    0.232354] cpuidle: using governor ladder
[    0.232356] cpuidle: using governor menu
[    0.232362] node 0 link 0: io port [c000, ffff]
[    0.232364] TOM: 00000000d0000000 aka 3328M
[    0.232366] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[    0.232368] node 0 link 0: mmio [a0000, bffff]
[    0.232371] node 0 link 0: mmio [d0000000, dfffffff]
[    0.232373] node 0 link 0: mmio [f0000000, fe02ffff]
[    0.232374] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
[    0.232376] TOM2: 0000000130000000 aka 4864M
[    0.232378] bus: [bus 00-03] on node 0 link 0
[    0.232380] bus: 00 [io  0x0000-0xffff]
[    0.232381] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.232382] bus: 00 [mem 0xd0000000-0xdfffffff]
[    0.232383] bus: 00 [mem 0xe0400000-0xffffffff]
[    0.232384] bus: 00 [mem 0xe0100000-0xe03fffff]
[    0.232385] bus: 00 [mem 0x130000000-0xfcffffffff]
[    0.232455] ACPI: bus type PCI registered
[    0.232457] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.232522] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.232524] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.232911] PCI: Using configuration type 1 for base access
[    0.235403] ACPI: Added _OSI(Module Device)
[    0.235405] ACPI: Added _OSI(Processor Device)
[    0.235407] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.235408] ACPI: Added _OSI(Processor Aggregator Device)
[    0.241401] ACPI: Interpreter enabled
[    0.241411] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.241416] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.241428] ACPI: (supports S0 S3 S4 S5)
[    0.241430] ACPI: Using IOAPIC for interrupt routing
[    0.241497] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.273319] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.273326] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.273330] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.273546] PCI host bridge to bus 0000:00
[    0.273549] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.273551] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.273553] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.273555] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.273557] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.273559] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
[    0.273568] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
[    0.273660] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[    0.273697] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.273732] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.273775] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
[    0.273807] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.273840] pci 0000:00:0a.0: System wakeup disabled by ACPI
[    0.273890] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[    0.273911] pci 0000:00:11.0: reg 0x10: [io  0xff00-0xff07]
[    0.273921] pci 0000:00:11.0: reg 0x14: [io  0xfe00-0xfe03]
[    0.273930] pci 0000:00:11.0: reg 0x18: [io  0xfd00-0xfd07]
[    0.273939] pci 0000:00:11.0: reg 0x1c: [io  0xfc00-0xfc03]
[    0.273948] pci 0000:00:11.0: reg 0x20: [io  0xfb00-0xfb0f]
[    0.273958] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
[    0.273977] pci 0000:00:11.0: set SATA to AHCI mode
[    0.274080] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.274093] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
[    0.274175] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.274212] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[    0.274225] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[    0.274307] pci 0000:00:12.1: System wakeup disabled by ACPI
[    0.274347] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.274365] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff]
[    0.274445] pci 0000:00:12.2: supports D1 D2
[    0.274447] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.274483] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.274523] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.274536] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[    0.274618] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.274653] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[    0.274667] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[    0.274749] pci 0000:00:13.1: System wakeup disabled by ACPI
[    0.274792] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.274811] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[    0.274891] pci 0000:00:13.2: supports D1 D2
[    0.274893] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.274936] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.274979] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.275121] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.275137] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
[    0.275147] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
[    0.275156] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
[    0.275165] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
[    0.275174] pci 0000:00:14.1: reg 0x20: [io  0xfa00-0xfa0f]
[    0.275194] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.275195] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.275197] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.275199] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.275283] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.275304] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
[    0.275369] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.275403] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.275439] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.275559] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.275622] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.275656] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.275669] pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff]
[    0.275752] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.275789] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.275849] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.275906] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.275964] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.276023] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.276128] pci 0000:01:00.0: [1002:944c] type 00 class 0x030000
[    0.276142] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.276151] pci 0000:01:00.0: reg 0x18: [mem 0xfdfe0000-0xfdfeffff 64bit]
[    0.276158] pci 0000:01:00.0: reg 0x20: [io  0xee00-0xeeff]
[    0.276169] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.276199] pci 0000:01:00.0: supports D1 D2
[    0.276240] pci 0000:01:00.1: [1002:aa30] type 00 class 0x040300
[    0.276253] pci 0000:01:00.1: reg 0x10: [mem 0xfdffc000-0xfdffffff 64bit]
[    0.276306] pci 0000:01:00.1: supports D1 D2
[    0.282919] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.282925] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.282928] pci 0000:00:02.0:   bridge window [mem 0xfdf00000-0xfdffffff]
[    0.282931] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.282990] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.283005] pci 0000:02:00.0: reg 0x10: [io  0xde00-0xdeff]
[    0.283024] pci 0000:02:00.0: reg 0x18: [mem 0xfdbff000-0xfdbfffff 64bit pref]
[    0.283037] pci 0000:02:00.0: reg 0x20: [mem 0xfdbe0000-0xfdbeffff 64bit pref]
[    0.283046] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.283103] pci 0000:02:00.0: supports D1 D2
[    0.283104] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.290919] pci 0000:00:0a.0: PCI bridge to [bus 02]
[    0.290924] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.290926] pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.290930] pci 0000:00:0a.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.290996] pci 0000:03:0e.0: [104c:8024] type 00 class 0x0c0010
[    0.291019] pci 0000:03:0e.0: reg 0x10: [mem 0xfddff000-0xfddff7ff]
[    0.291031] pci 0000:03:0e.0: reg 0x14: [mem 0xfddf8000-0xfddfbfff]
[    0.291122] pci 0000:03:0e.0: supports D1 D2
[    0.291124] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
[    0.291193] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[    0.291197] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.291201] pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.291205] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff pref]
[    0.291207] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.291209] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.291210] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.291212] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.291214] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
[    0.291228] pci_bus 0000:00: on NUMA node 0
[    0.306977] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.307019] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.307057] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.307096] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.307132] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.307168] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.307203] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.307238] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.307822] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.307824] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.307826] vgaarb: loaded
[    0.307827] vgaarb: bridge control possible 0000:01:00.0
[    0.308074] SCSI subsystem initialized
[    0.308137] libata version 3.00 loaded.
[    0.308165] ACPI: bus type USB registered
[    0.308183] usbcore: registered new interface driver usbfs
[    0.308193] usbcore: registered new interface driver hub
[    0.308214] usbcore: registered new device driver usb
[    0.308370] PCI: Using ACPI for IRQ routing
[    0.316727] PCI: pci_cache_line_size set to 64 bytes
[    0.316779] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.316781] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
[    0.316894] NetLabel: Initializing
[    0.316896] NetLabel:  domain hash size = 128
[    0.316896] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.316907] NetLabel:  unlabeled traffic allowed by default
[    0.317008] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.317012] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.319068] Switched to clocksource hpet
[    0.324346] AppArmor: AppArmor Filesystem Enabled
[    0.324374] pnp: PnP ACPI init
[    0.324387] ACPI: bus type PNP registered
[    0.324474] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.324477] system 00:00: [io  0x0220-0x0225] has been reserved
[    0.324479] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.324482] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.339204] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    0.339210] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[    0.339246] system 00:01: [io  0x4100-0x411f] has been reserved
[    0.339249] system 00:01: [io  0x0228-0x022f] has been reserved
[    0.339251] system 00:01: [io  0x040b] has been reserved
[    0.339252] system 00:01: [io  0x04d6] has been reserved
[    0.339254] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.339256] system 00:01: [io  0x0c14] has been reserved
[    0.339258] system 00:01: [io  0x0c50-0x0c52] has been reserved
[    0.339259] system 00:01: [io  0x0c6c-0x0c6d] has been reserved
[    0.339261] system 00:01: [io  0x0c6f] has been reserved
[    0.339263] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.339264] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.339266] system 00:01: [io  0x0cd4-0x0cdf] has been reserved
[    0.339268] system 00:01: [io  0x4000-0x40fe] could not be reserved
[    0.339270] system 00:01: [io  0x4210-0x4217] has been reserved
[    0.339272] system 00:01: [io  0x0b00-0x0b0f] has been reserved
[    0.339273] system 00:01: [io  0x0b10-0x0b1f] has been reserved
[    0.339275] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    0.339277] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[    0.339280] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.339402] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.339675] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.339866] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.339986] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.339989] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.340110] system 00:06: [mem 0x000cf800-0x000cffff] has been reserved
[    0.340113] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.340115] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.340116] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.340118] system 00:06: [mem 0xcfee0000-0xcfefffff] could not be reserved
[    0.340120] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved
[    0.340122] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.340124] system 00:06: [mem 0x00100000-0xcfedffff] could not be reserved
[    0.340126] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.340128] system 00:06: [mem 0xfee00000-0xfee00fff] could not be reserved
[    0.340130] system 00:06: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.340132] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.340147] pnp: PnP ACPI: found 7 devices
[    0.340149] ACPI: bus type PNP unregistered
[    0.346779] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
[    0.346782] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.346785] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.346788] pci 0000:00:02.0:   bridge window [mem 0xfdf00000-0xfdffffff]
[    0.346790] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.346794] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref]
[    0.346796] pci 0000:00:0a.0: PCI bridge to [bus 02]
[    0.346798] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.346801] pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.346803] pci 0000:00:0a.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.346806] pci 0000:00:14.4: PCI bridge to [bus 03]
[    0.346809] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.346814] pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.346818] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff pref]
[    0.346824] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.346826] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.346827] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.346829] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.346831] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
[    0.346833] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.346835] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
[    0.346836] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.346838] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.346840] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.346842] pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.346844] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.346846] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[    0.346847] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[    0.346849] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.346851] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.346853] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.346854] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[    0.346856] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xfebfffff]
[    0.346883] NET: Registered protocol family 2
[    0.347081] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.347177] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.347312] TCP: Hash tables configured (established 32768 bind 32768)
[    0.347349] TCP: reno registered
[    0.347356] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.347385] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.347448] NET: Registered protocol family 1
[    0.767134] pci 0000:01:00.0: Video device with shadowed ROM
[    0.767146] PCI: CLS 4 bytes, default 64
[    0.767218] Trying to unpack rootfs image as initramfs...
[    1.245636] Freeing initrd memory: 28852K (ffff880034796000 - ffff8800363c3000)
[    1.245936] PCI-DMA: Disabling AGP.
[    1.246015] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    1.246016] PCI-DMA: using GART IOMMU.
[    1.246019] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.249526] microcode: CPU0: patch_level=0x01000086
[    1.249537] microcode: CPU1: patch_level=0x01000086
[    1.249544] microcode: CPU2: patch_level=0x01000086
[    1.249613] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.249617] LVT offset 1 assigned for vector 0x400
[    1.249623] IBS: LVT offset 1 assigned
[    1.249635] perf: AMD IBS detected (0x0000001f)
[    1.249657] Scanning for low memory corruption every 60 seconds
[    1.249912] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.249931] Initialise system trusted keyring
[    1.249954] audit: initializing netlink subsys (disabled)
[    1.249970] audit: type=2000 audit(1447753700.112:1): initialized
[    1.250351] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.251825] zpool: loaded
[    1.251827] zbud: loaded
[    1.252024] VFS: Disk quotas dquot_6.5.2
[    1.252058] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.252581] fuse init (API version 7.23)
[    1.252665] msgmni has been set to 7899
[    1.252720] Key type big_key registered
[    1.253150] Key type asymmetric registered
[    1.253153] Asymmetric key parser 'x509' registered
[    1.253191] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.253237] io scheduler noop registered
[    1.253239] io scheduler deadline registered (default)
[    1.253286] io scheduler cfq registered
[    1.253498] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[    1.253622] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[    1.253684] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.253700] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.253744] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[    1.253745] vesafb: scrolling: redraw
[    1.253747] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.257082] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 5824k, total 5824k
[    1.257221] Console: switching to colour frame buffer device 175x65
[    1.257249] fb0: VESA VGA frame buffer device
[    1.257346] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.257349] ACPI: Power Button [PWRB]
[    1.257391] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.257393] ACPI: Power Button [PWRF]
[    1.257588] GHES: HEST is not enabled!
[    1.257687] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.278140] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.279657] Linux agpgart interface v0.103
[    1.280840] brd: module loaded
[    1.281449] loop: module loaded
[    1.281669] libphy: Fixed MDIO Bus: probed
[    1.281672] tun: Universal TUN/TAP device driver, 1.6
[    1.281673] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.281716] PPP generic driver version 2.4.2
[    1.281756] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.281760] ehci-pci: EHCI PCI platform driver
[    1.281890] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.281897] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.281901] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.281912] ehci-pci 0000:00:12.2: debug port 1
[    1.281958] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
[    1.290942] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.290987] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.290990] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.290992] usb usb1: Product: EHCI Host Controller
[    1.290993] usb usb1: Manufacturer: Linux 3.16.0-38-generic ehci_hcd
[    1.290995] usb usb1: SerialNumber: 0000:00:12.2
[    1.291147] hub 1-0:1.0: USB hub found
[    1.291155] hub 1-0:1.0: 6 ports detected
[    1.291421] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.291427] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.291430] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.291441] ehci-pci 0000:00:13.2: debug port 1
[    1.291486] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
[    1.302933] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.302975] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.302977] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.302979] usb usb2: Product: EHCI Host Controller
[    1.302981] usb usb2: Manufacturer: Linux 3.16.0-38-generic ehci_hcd
[    1.302982] usb usb2: SerialNumber: 0000:00:13.2
[    1.303103] hub 2-0:1.0: USB hub found
[    1.303109] hub 2-0:1.0: 6 ports detected
[    1.303242] ehci-platform: EHCI generic platform driver
[    1.303251] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.303255] ohci-pci: OHCI PCI platform driver
[    1.303363] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.303368] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.303403] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
[    1.362948] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.362951] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.362953] usb usb3: Product: OHCI PCI host controller
[    1.362954] usb usb3: Manufacturer: Linux 3.16.0-38-generic ohci_hcd
[    1.362956] usb usb3: SerialNumber: 0000:00:12.0
[    1.363084] hub 3-0:1.0: USB hub found
[    1.363092] hub 3-0:1.0: 3 ports detected
[    1.363284] ohci-pci 0000:00:12.1: OHCI PCI host controller
[    1.363289] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[    1.363307] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
[    1.422940] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.422943] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.422945] usb usb4: Product: OHCI PCI host controller
[    1.422946] usb usb4: Manufacturer: Linux 3.16.0-38-generic ohci_hcd
[    1.422948] usb usb4: SerialNumber: 0000:00:12.1
[    1.423072] hub 4-0:1.0: USB hub found
[    1.423079] hub 4-0:1.0: 3 ports detected
[    1.423270] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.423276] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.423308] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
[    1.482926] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.482929] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.482931] usb usb5: Product: OHCI PCI host controller
[    1.482932] usb usb5: Manufacturer: Linux 3.16.0-38-generic ohci_hcd
[    1.482934] usb usb5: SerialNumber: 0000:00:13.0
[    1.483059] hub 5-0:1.0: USB hub found
[    1.483066] hub 5-0:1.0: 3 ports detected
[    1.483260] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    1.483264] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[    1.483282] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
[    1.542916] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.542919] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.542921] usb usb6: Product: OHCI PCI host controller
[    1.542922] usb usb6: Manufacturer: Linux 3.16.0-38-generic ohci_hcd
[    1.542924] usb usb6: SerialNumber: 0000:00:13.1
[    1.543050] hub 6-0:1.0: USB hub found
[    1.543057] hub 6-0:1.0: 3 ports detected
[    1.543248] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.543253] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[    1.543271] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
[    1.602904] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.602907] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.602909] usb usb7: Product: OHCI PCI host controller
[    1.602910] usb usb7: Manufacturer: Linux 3.16.0-38-generic ohci_hcd
[    1.602912] usb usb7: SerialNumber: 0000:00:14.5
[    1.603039] hub 7-0:1.0: USB hub found
[    1.603046] hub 7-0:1.0: 2 ports detected
[    1.603133] ohci-platform: OHCI generic platform driver
[    1.603143] uhci_hcd: USB Universal Host Controller Interface driver
[    1.603203] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.603618] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.603625] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.603766] mousedev: PS/2 mouse device common for all mice
[    1.603902] rtc_cmos 00:02: RTC can wake from S4
[    1.604012] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.604044] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.604112] device-mapper: uevent: version 1.0.3
[    1.604176] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.604191] ledtrig-cpu: registered to indicate activity on CPUs
[    1.604283] TCP: cubic registered
[    1.604393] NET: Registered protocol family 10
[    1.604606] NET: Registered protocol family 17
[    1.604617] Key type dns_resolver registered
[    1.604916] Loading compiled-in X.509 certificates
[    1.605969] Loaded X.509 cert 'Magrathea: Glacier signing key: c284edaccf0b473652c34d23bec356944236e63b'
[    1.605983] registered taskstats version 1
[    1.607831] Key type trusted registered
[    1.611028] Key type encrypted registered
[    1.611035] AppArmor: AppArmor sha1 policy hashing enabled
[    1.611038] ima: No TPM chip found, activating TPM-bypass!
[    1.611053] evm: HMAC attrs: 0x1
[    1.611334]   Magic number: 7:50:829
[    1.611413] rtc_cmos 00:02: setting system clock to 2015-11-17 09:48:21 UTC (1447753701)
[    1.611503] acpi-cpufreq: overriding BIOS provided _PSD data
[    1.611600] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.611601] EDD information not available.
[    1.611647] PM: Hibernation image not present or could not be loaded.
[    1.613032] Freeing unused kernel memory: 1352K (ffffffff81d1c000 - ffffffff81e6e000)
[    1.613034] Write protecting the kernel read-only data: 12288k
[    1.614628] Freeing unused kernel memory: 556K (ffff880001775000 - ffff880001800000)
[    1.615990] Freeing unused kernel memory: 500K (ffff880001b83000 - ffff880001c00000)
[    1.627582] systemd-udevd[110]: starting version 204
[    1.637819] wmi: Mapper loaded
[    1.647817] r8168: module verification failed: signature and/or  required key missing - tainting kernel
[    1.648179] r8168 Gigabit Ethernet driver 8.040.00-NAPI loaded
[    1.648287] r8168 0000:02:00.0: irq 42 for MSI/MSI-X
[    1.649061] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[    1.649069] r8168  Copyright (C) 2015  Realtek NIC software team <nicfae@realtek.com>
[    1.649069]  This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
[    1.649069]  This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[    1.649210] [drm] Initialized drm 1.1.0 20060810
[    1.654576] scsi0 : pata_atiixp
[    1.659773] scsi1 : pata_atiixp
[    1.659826] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[    1.659828] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[    1.660324] ahci 0000:00:11.0: version 3.0
[    1.661040] ahci 0000:00:11.0: irq 43 for MSI/MSI-X
[    1.661119] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.661122] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[    1.664118] scsi2 : ahci
[    1.664208] scsi3 : ahci
[    1.664290] scsi4 : ahci
[    1.664368] scsi5 : ahci
[    1.664414] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 43
[    1.664417] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 43
[    1.664419] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 43
[    1.664422] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 43
[    1.676499] [drm] radeon kernel modesetting enabled.
[    1.676563] checking generic (d0000000 5b0000) vs hw (d0000000 10000000)
[    1.676565] fb: switching to radeondrmfb from VESA VGA
[    1.676587] Console: switching to colour dummy device 80x25
[    1.682739] [drm] initializing kernel modesetting (RV770 0x1002:0x944C 0x174B:0xE111).
[    1.682751] [drm] register mmio base: 0xFDFE0000
[    1.682753] [drm] register mmio size: 65536
[    1.683381] ATOM BIOS: HD4830
[    1.683413] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    1.683416] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    1.683418] [drm] Detected VRAM RAM=1024M, BAR=256M
[    1.683419] [drm] RAM width 256bits DDR
[    1.685009] [TTM] Zone  kernel: Available graphics memory: 2023548 kiB
[    1.685012] [TTM] Initializing pool allocator
[    1.685017] [TTM] Initializing DMA pool allocator
[    1.685036] [drm] radeon: 1024M of VRAM memory ready
[    1.685038] [drm] radeon: 1024M of GTT memory ready.
[    1.685048] [drm] Loading RV770 Microcode
[    1.685104] [drm] Internal thermal controller with fan control
[    1.685177] [drm] radeon: power management initialized
[    1.685182] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.686729] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    1.689453] [drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
[    1.689483] radeon 0000:01:00.0: WB enabled
[    1.689487] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800cf029c00
[    1.689489] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800cf029c0c
[    1.689492] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.689493] [drm] Driver supports precise vblank timestamp query.
[    1.689494] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    1.689512] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
[    1.689521] radeon 0000:01:00.0: radeon: using MSI.
[    1.689543] [drm] radeon: irq initialized.
[    1.726911] firewire_ohci 0000:03:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    1.735406] [drm] ring test on 0 succeeded in 1 usecs
[    1.735412] [drm] ring test on 3 succeeded in 2 usecs
[    1.735507] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.735521] [drm] ib test on ring 3 succeeded in 0 usecs
[    1.735879] [drm] Radeon Display Connectors
[    1.735880] [drm] Connector 0:
[    1.735881] [drm]   DVI-I-1
[    1.735882] [drm]   HPD2
[    1.735884] [drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[    1.735884] [drm]   Encoders:
[    1.735885] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    1.735886] [drm]     DFP2: INTERNAL_KLDSCP_LVTMA
[    1.735887] [drm] Connector 1:
[    1.735888] [drm]   HDMI-A-1
[    1.735889] [drm]   HPD3
[    1.735891] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    1.735891] [drm]   Encoders:
[    1.735892] [drm]     DFP1: INTERNAL_UNIPHY
[    1.735893] [drm] Connector 2:
[    1.735894] [drm]   VGA-1
[    1.735895] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[    1.735896] [drm]   Encoders:
[    1.735897] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    1.816730] [drm] fb mappable at 0xD0241000
[    1.816732] [drm] vram apper at 0xD0000000
[    1.816733] [drm] size 8294400
[    1.816734] [drm] fb depth is 24
[    1.816735] [drm]    pitch is 7680
[    1.816817] fbcon: radeondrmfb (fb0) is primary device
[    1.816856] Console: switching to colour frame buffer device 240x67
[    1.816894] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    1.816896] radeon 0000:01:00.0: registered panic notifier
[    1.822876] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
[    1.874859] usb 2-6: new high-speed USB device number 3 using ehci-pci
[    1.990834] ata5: SATA link down (SStatus 0 SControl 300)
[    2.007711] usb 2-6: New USB device found, idVendor=0451, idProduct=8044
[    2.007714] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.007716] usb 2-6: SerialNumber: A80200696F60
[    2.007990] hub 2-6:1.0: USB hub found
[    2.008083] hub 2-6:1.0: 4 ports detected
[    2.162798] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.162824] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.162850] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.163174] ata4.00: ATAPI: SONY    DVD RW DRU-860S, 1.61, max UDMA/100
[    2.164096] ata4.00: configured for UDMA/100
[    2.164441] ata6.00: HPA detected: current 488395055, native 488397168
[    2.164443] ata6.00: supports DRM functions and may not be fully accessible
[    2.164493] ata3.00: HPA detected: current 1953523055, native 1953525168
[    2.164496] ata3.00: ATA-8: MAXTOR STM31000340AS, MX1A, max UDMA/133
[    2.164498] ata3.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.164609] ata6.00: failed to get NCQ Send/Recv Log Emask 0x1
[    2.164611] ata6.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
[    2.164612] ata6.00: 488395055 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.165066] ata6.00: supports DRM functions and may not be fully accessible
[    2.165155] ata6.00: failed to get NCQ Send/Recv Log Emask 0x1
[    2.165274] ata6.00: configured for UDMA/133
[    2.166624] ata3.00: configured for UDMA/133
[    2.166769] scsi 2:0:0:0: Direct-Access     ATA      MAXTOR STM310003 MX1A PQ: 0 ANSI: 5
[    2.166973] sd 2:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.167016] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.167037] sd 2:0:0:0: [sda] Write Protect is off
[    2.167040] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.167059] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.168237] scsi 3:0:0:0: CD-ROM            SONY     DVD RW DRU-860S  1.61 PQ: 0 ANSI: 5
[    2.185338] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.185341] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.185469] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.185567] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    2.185693] scsi 5:0:0:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
[    2.185879] sd 5:0:0:0: [sdb] 488395055 512-byte logical blocks: (250 GB/232 GiB)
[    2.185909] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    2.185991] sd 5:0:0:0: [sdb] Write Protect is off
[    2.185994] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.186025] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.187753]  sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
[    2.188217] sd 5:0:0:0: [sdb] Attached SCSI disk
[    2.200581]  sda: sda1
[    2.200859] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.226839] firewire_core 0000:03:0e.0: created device fw0: GUID 0044636b0000241d, S400
[    2.246765] tsc: Refined TSC clocksource calibration: 2611.801 MHz
[    2.270783] usb 5-3: new full-speed USB device number 2 using ohci-pci
[    2.433847] usb 5-3: not running at top speed; connect to a high speed hub
[    2.445848] usb 5-3: New USB device found, idVendor=058f, idProduct=6362
[    2.445852] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.445854] usb 5-3: Product: Mass Storage Device
[    2.445856] usb 5-3: Manufacturer: Generic
[    2.445858] usb 5-3: SerialNumber: 058F312D81B
[    2.450835] usb-storage 5-3:1.0: USB Mass Storage device detected
[    2.450932] scsi6 : usb-storage 5-3:1.0
[    2.450998] usbcore: registered new interface driver usb-storage
[    2.452508] usbcore: registered new interface driver uas
[    2.518860] usb 2-6.1: new full-speed USB device number 4 using ehci-pci
[    2.617089] usb 2-6.1: New USB device found, idVendor=045e, idProduct=0724
[    2.617093] usb 2-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.617094] usb 2-6.1: Product: SideWinder\xffffffe2\xffffff84\xffffffa2\xffffff84\xffffffa2 Mouse
[    2.617096] usb 2-6.1: Manufacturer: Microsoft
[    2.620560] hidraw: raw HID events driver (C) Jiri Kosina
[    2.630829] usbcore: registered new interface driver usbhid
[    2.630832] usbhid: USB HID core driver
[    2.632845] input: Microsoft SideWinder\xffffffe2\xffffff84\xffffffa2\xffffff84\xffffffa2 Mouse as /devices/pci0000:00/0000:00:13.2/usb2/2-6/2-6.1/2-6.1:1.0/0003:045E:0724.0001/input/input5
[    2.632986] hid-generic 0003:045E:0724.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft SideWinder\xffffffe2\xffffff84\xffffffa2\xffffff84\xffffffa2 Mouse] on usb-0000:00:13.2-6.1/input0
[    2.686821] usb 2-6.3: new high-speed USB device number 5 using ehci-pci
[    2.779908] usb 2-6.3: New USB device found, idVendor=1a40, idProduct=0101
[    2.779911] usb 2-6.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.779913] usb 2-6.3: Product: USB 2.0 Hub
[    2.780066] hub 2-6.3:1.0: USB hub found
[    2.780157] hub 2-6.3:1.0: 4 ports detected
[    2.850782] usb 2-6.4: new full-speed USB device number 6 using ehci-pci
[    2.953505] usb 2-6.4: New USB device found, idVendor=045e, idProduct=074b
[    2.953508] usb 2-6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.953510] usb 2-6.4: Product: Microsoft\xffffffc2\xffffffae\xffffffae SiderWinderTM X6 Keyboard
[    2.953512] usb 2-6.4: Manufacturer: Microsoft
[    2.956772] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae SiderWinderTM X6 Keyboard as /devices/pci0000:00/0000:00:13.2/usb2/2-6/2-6.4/2-6.4:1.0/0003:045E:074B.0002/input/input6
[    2.956878] hid-generic 0003:045E:074B.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae SiderWinderTM X6 Keyboard] on usb-0000:00:13.2-6.4/input0
[    2.966584] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae SiderWinderTM X6 Keyboard as /devices/pci0000:00/0000:00:13.2/usb2/2-6/2-6.4/2-6.4:1.1/0003:045E:074B.0003/input/input7
[    2.966696] hid-generic 0003:045E:074B.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae SiderWinderTM X6 Keyboard] on usb-0000:00:13.2-6.4/input1
[    3.246659] Switched to clocksource tsc
[    3.456770] scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    3.462770] scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    3.468767] scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    3.474768] scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    3.475004] sd 6:0:0:0: Attached scsi generic sg3 type 0
[    3.475209] sd 6:0:0:1: Attached scsi generic sg4 type 0
[    3.475361] sd 6:0:0:2: Attached scsi generic sg5 type 0
[    3.475585] sd 6:0:0:3: Attached scsi generic sg6 type 0
[    3.764737] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    3.774720] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[    3.784734] sd 6:0:0:2: [sde] Attached SCSI removable disk
[    3.794731] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[    4.658378] floppy0: no floppy controllers found
[    4.950683] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[    5.034989] random: init urandom read with 110 bits of entropy available
[    5.261500] random: nonblocking pool is initialized
[    5.928712] Adding 1975292k swap on /dev/sdb5.  Priority:-1 extents:1 across:1975292k SSFS
[    5.938780] EXT4-fs (sdb6): re-mounted. Opts: errors=remount-ro
[    6.014618] systemd-udevd[415]: starting version 204
[    6.066979] lp: driver loaded but no devices found
[    6.079890] ppdev: user-space parallel port driver
[    6.082705] parport_pc 00:04: reported by Plug and Play ACPI
[    6.082758] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    6.086247] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.146254] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SOR1) (20140424/utaddress-258)
[    6.146261] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.178215] lp0: using parport0 (interrupt-driven).
[    6.185017] MCE: In-kernel MCE decoding enabled.
[    6.188179] EDAC MC: Ver: 3.0.0
[    6.191238] AMD64 EDAC driver v3.4.0
[    6.191260] EDAC amd64: DRAM ECC disabled.
[    6.191265] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    6.191265]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    6.191265]  (Note that use of the override may cause unknown side effects.)
[    6.239809] snd_hda_intel 0000:00:14.2: position_fix set to 1 for device 1458:a022
[    6.239899] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    6.240533] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[    6.253410] kvm: disabled by bios
[    6.254942] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
[    6.320487] Bluetooth: Core ver 2.19
[    6.320505] NET: Registered protocol family 31
[    6.320507] Bluetooth: HCI device and connection manager initialized
[    6.320513] Bluetooth: HCI socket layer initialized
[    6.320516] Bluetooth: L2CAP socket layer initialized
[    6.320523] Bluetooth: SCO socket layer initialized
[    6.321598] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    6.321600] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.321602] sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    6.321604] sound hdaudioC0D0:    mono: mono_out=0x0
[    6.321605] sound hdaudioC0D0:    dig-out=0x1e/0x0
[    6.321606] sound hdaudioC0D0:    inputs:
[    6.321609] sound hdaudioC0D0:      Rear Mic=0x18
[    6.321610] sound hdaudioC0D0:      Front Mic=0x19
[    6.321612] sound hdaudioC0D0:      Line=0x1a
[    6.321614] sound hdaudioC0D0:      CD=0x1c
[    6.321615] sound hdaudioC0D0:    dig-in=0x1f
[    6.340693] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.340697] Bluetooth: BNEP filters: protocol multicast
[    6.340705] Bluetooth: BNEP socket layer initialized
[    6.341900] device-mapper: multipath: version 1.7.0 loaded
[    6.356495] Bluetooth: RFCOMM TTY layer initialized
[    6.356506] Bluetooth: RFCOMM socket layer initialized
[    6.356513] Bluetooth: RFCOMM ver 1.11
[    6.359419] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    6.359511] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    6.359596] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[    6.359817] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[    6.359927] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[    6.360014] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[    6.360097] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[    6.360231] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[    6.422153] init: cups main process (649) killed by HUP signal
[    6.422164] init: cups main process ended, respawning
[    6.653254] init: failsafe main process (807) killed by TERM signal
[    6.785346] init: samba-ad-dc main process (884) terminated with status 1
[    6.828028] eth0: 0xffffc90000654000, 00:24:1d:2e:13:f8, IRQ 42
[    6.860168] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.113540] init: plymouth-upstart-bridge main process ended, respawning
[    7.120263] init: plymouth-upstart-bridge main process (1237) terminated with status 1
[    7.120273] init: plymouth-upstart-bridge main process ended, respawning
[    7.414871] sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[    7.432197] sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[    7.713863] sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[    8.013822] sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[    8.313776] sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[    8.613729] sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[    8.913698] sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[    9.125652] floppy0: no floppy controllers found
[    9.125672] work still pending
[    9.213633] sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[    9.513561] sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[    9.813495] sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[    9.831408] vboxdrv: Found 3 processor cores
[    9.849906] vboxdrv: TSC mode is Invariant, tentative frequency 2611739976 Hz
[    9.849915] vboxdrv: Successfully loaded version 5.0.2 (interface 0x00230003)
[   10.059269] VBoxNetFlt: Successfully started.
[   10.063755] VBoxNetAdp: Successfully started.
[   10.066279] VBoxPciLinuxInit
[   10.069194] vboxpci: IOMMU not found (not registered)
[   10.164283] init: plymouth-stop pre-start process (1589) terminated with status 1
[   13.960848] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   13.960864] ata3.00: failed command: IDENTIFY DEVICE
[   13.960879] ata3.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 28 pio 512 in
[   13.960879]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   13.960887] ata3.00: status: { DRDY }
[   13.960895] ata3: hard resetting link
[   14.452745] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   14.456621] ata3.00: configured for UDMA/133
[   14.456664] ata3: EH complete
[   94.847516] r8168: eth0: link up
[   94.847579] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready


Herkese teşekkür ederim.

[heartsmagic]

ipv6'yı kapatmayı deneyebilirsin. Forumda aratırsan farklı çözümler göreceksin, benim önerim Grub'a işlenmesi yönünde. Sonrasında kapatılmış mı diye şöylece bakabilirsin:

Kod Seç Genişlet

cat /proc/sys/net/ipv6/conf/all/disable_ipv6Bu komutun sana "1" sonucunu döndürmesi lazım.
Bir de dikkatimi çekti, çekirdek parametrelerinin içinde acpi=force var. Bu parametre olmadan sıkıntı mı yaşıyorsun sisteminde?

[spider909]

ipv6'yı kapatmayı deneyebilirsin. Forumda aratırsan farklı çözümler göreceksin, benim önerim Grub'a işlenmesi yönünde. Sonrasında kapatılmış mı diye şöylece bakabilirsin:

Kod Seç Genişlet

cat /proc/sys/net/ipv6/conf/all/disable_ipv6Bu komutun sana "1" sonucunu döndürmesi lazım.
Bir de dikkatimi çekti, çekirdek parametrelerinin içinde acpi=force var. Bu parametre olmadan sıkıntı mı yaşıyorsun sisteminde?

ipv6 yı deaktif ettim ama sorun çözülmedi. Kabloyu çıkarıp takıp uğraşarak bağlantı sağlayabildim tekrar.

acpi=force' u kullanmamın nedeni bilgisayar kapanmıyordu. Bir kaç yol denedim bir tanesi de buydu o zamandan kalmış bir parametre. Komut satırında shutdown kullandığım zaman bilgisayarın ekranı vs gidiyor. Ama çalışmaya devam ediyordu. Aynı şekilde Ubuntu'da da bu sorunu yaşıyordum. Yine kernel kaynaklı olduğunu düşünüyorum çünkü bir çok Linux dağıtımında aynı sorunu yaşadım. Neden bilmiyorum ama sonradan menü üzerinden shutdown dediğimde kapandığını farkettim. O yüzden artık terminalden değil elle menü'den kapatıyorum. Muhtemelen çok da işime yaramıyordur acpi=force parametresi.

[heartsmagic]

Tamam, öncelikle o parametreyi kaldırıp sistemi yeniden başlat sonra tekrar bir ağı dene.
İkinci olarak da, ağ erişimi koptuğu zaman şu komutun çıktısını buraya aktar lütfen:

Kod Seç Genişlet

dmesg | tail

[spider909]

Tamam, öncelikle o parametreyi kaldırıp sistemi yeniden başlat sonra tekrar bir ağı dene.
İkinci olarak da, ağ erişimi koptuğu zaman şu komutun çıktısını buraya aktar lütfen:

Kod Seç Genişlet

dmesg | tail

Parametreyi kaldırıp tekrar başlattım bilgisayarı. İnternet bağlı olarak başlamadı (Bazen şansa bağlanıyor, bir kaç kez çıkarıp takarak bağlandım yine.) Bağlantıdan önce aldığım çıktı:

Kod Seç Genişlet

torak@torak-GA-MA770T-UD3P ~ $ dmesg | tail
[   10.154025] init: plymouth-stop pre-start process (1602) terminated with status 1
[   21.923695] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   21.923700] ata1.00: failed command: SET FEATURES
[   21.923705] ata1.00: cmd ef/05:fe:00:00:00/00:00:00:00:00/40 tag 29
[   21.923705]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   21.923708] ata1.00: status: { DRDY }
[   21.923711] ata1: hard resetting link
[   22.415603] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   22.419459] ata1.00: configured for UDMA/133
[   22.419502] ata1: EH complete


Bağlantıyı sağladıktan sonra:

Kod Seç Genişlet

torak@torak-GA-MA770T-UD3P ~ $ dmesg | tail
[   21.923700] ata1.00: failed command: SET FEATURES
[   21.923705] ata1.00: cmd ef/05:fe:00:00:00/00:00:00:00:00/40 tag 29
[   21.923705]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   21.923708] ata1.00: status: { DRDY }
[   21.923711] ata1: hard resetting link
[   22.415603] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   22.419459] ata1.00: configured for UDMA/133
[   22.419502] ata1: EH complete
[   49.803374] r8168: eth0: link up
[   49.803432] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready


İkincide zaten eth0 link up diye görülüyor.

Parametre başarıyla kaldırılmış burada görülüyor:

Kod Seç Genişlet

torak@torak-GA-MA770T-UD3P ~ $ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic root=UUID=a8cb3a1e-2d3b-4428-a76e-51a14f608ec1 ro quiet splash vt.handoff=7


ipv6 çıktısını da paylaşayım yine de :

Kod Seç Genişlet

torak@torak-GA-MA770T-UD3P ~ $ cat /proc/sys/net/ipv6/conf/all/disable_ipv6
1


[heartsmagic]

Modül olarak 8168 kullanıyor, doğru modül müdür acaba? Neyse, bunu kurcalamadan önce mümkünse sabit IP verip deneyebilir misin? O konuyu da bir elemiş olalım. Ayrıca, elinde başka bir kablo varsa bence bir de onunla dene.

[spider909]

Modül olarak 8168 kullanıyor, doğru modül müdür acaba? Neyse, bunu kurcalamadan önce mümkünse sabit IP verip deneyebilir misin? O konuyu da bir elemiş olalım. Ayrıca, elinde başka bir kablo varsa bence bir de onunla dene.

Kendi sitelerinde verdikleri modül r8168 zaten. http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false#2
Sabit ip verdim bu sefer bağlı gibi gözüktü ama internet gelmedi. Sağ alttaki simge bağlı gözüküyordu yani ama internete çıkamadım. Belki ben statik atama konusunda tecrübeli olmadığım için yanlış yapmış da olabilirim emin değilim.


Baştakiler bağlantı varmış gibi gözükünce yazdığım ifconfig. En sondaki ise ip'yi otomatiğe aldıktan sonra kabloyu tekrar çıkar-tak yaparak bağlandığımda aldığım çıktı.

Kod Seç Genişlet

torak@torak-GA-MA770T-UD3P ~ $ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:24:1d:2e:13:f8 
          inet addr:192.168.1.33  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fd20:8ed:8cee:f900:5dd9:45a4:d9c5:10c4/64 Scope:Global
          inet6 addr: fd20:8ed:8cee:f900:224:1dff:fe2e:13f8/64 Scope:Global
          inet6 addr: fe80::224:1dff:fe2e:13f8/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:9 errors:0 dropped:0 overruns:0 frame:0
          TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:598 (598.0 B)  TX bytes:5611 (5.6 KB)
          Interrupt:42 Base address:0x4000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:198 errors:0 dropped:0 overruns:0 frame:0
          TX packets:198 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:38943 (38.9 KB)  TX bytes:38943 (38.9 KB)

torak@torak-GA-MA770T-UD3P ~ $ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:24:1d:2e:13:f8 
          inet addr:192.168.1.33  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fd20:8ed:8cee:f900:5dd9:45a4:d9c5:10c4/64 Scope:Global
          inet6 addr: fd20:8ed:8cee:f900:224:1dff:fe2e:13f8/64 Scope:Global
          inet6 addr: fe80::224:1dff:fe2e:13f8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:52 errors:0 dropped:0 overruns:0 frame:0
          TX packets:279 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:3346 (3.3 KB)  TX bytes:46177 (46.1 KB)
          Interrupt:42 Base address:0x4000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:403 errors:0 dropped:0 overruns:0 frame:0
          TX packets:403 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:62765 (62.7 KB)  TX bytes:62765 (62.7 KB)

torak@torak-GA-MA770T-UD3P ~ $ ping www.duckduckgo.com
^X^Z
[1]+  Stopped                 ping www.duckduckgo.com
torak@torak-GA-MA770T-UD3P ~ $ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:24:1d:2e:13:f8 
          inet addr:192.168.1.5  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fd20:8ed:8cee:f900:5dd9:45a4:d9c5:10c4/64 Scope:Global
          inet6 addr: fd20:8ed:8cee:f900:224:1dff:fe2e:13f8/64 Scope:Global
          inet6 addr: fe80::224:1dff:fe2e:13f8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:4783 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5529 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:3971446 (3.9 MB)  TX bytes:757231 (757.2 KB)
          Interrupt:42 Base address:0x4000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:1833 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1833 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:202510 (202.5 KB)  TX bytes:202510 (202.5 KB)


Sorunum bundan kaynaklanıyor da olabilir diye düşünüyorum sanırım burada benzer bişeyden bahsediyor. Belki siz benden daha iyi anlarsınız.
http://www.foxhop.net/realtek-dropping-packets-on-linux-ubuntu-and-fedora
https://unixblogger.wordpress.com/2011/10/18/the-pain-of-an-realtek-rtl8111rtl8168-ethernet-card/

Sistemim:

Kod Seç Genişlet

torak-ga-ma770t-ud3p
    description: Desktop Computer
    product: GA-MA770T-UD3P ()
    vendor: Gigabyte Technology Co., Ltd.
    width: 64 bits
    capabilities: smbios-2.4 dmi-2.4 vsyscall32
    configuration: boot=normal chassis=desktop uuid=30303234-3144-3245-3133-4638FFFFFFFF
  *-core
       description: Motherboard
       product: GA-MA770T-UD3P
       vendor: Gigabyte Technology Co., Ltd.
       physical id: 0
       version: x.x
     *-firmware
          description: BIOS
          vendor: Award Software International, Inc.
          physical id: 0
          version: F1
          date: 04/10/2009
          size: 128KiB
          capacity: 960KiB
          capabilities: isa pci pnp apm upgrade shadowing cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
     *-cpu
          description: CPU
          product: AMD Phenom(tm) II X3 710 Processor
          vendor: Advanced Micro Devices [AMD]
          physical id: 4
          bus info: cpu@0
          version: AMD Phenom(tm) II X3 710 Processor
          slot: Socket M2
          size: 800MHz
          capacity: 3200MHz
          width: 64 bits
          clock: 200MHz
          capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save vmmcall cpufreq
        *-cache:0
             description: L1 cache
             physical id: a
             slot: Internal Cache
             size: 128KiB
             capacity: 128KiB
             capabilities: synchronous internal write-back
        *-cache:1
             description: L3 cache
             physical id: c
             slot: External Cache
             size: 512KiB
             capacity: 512KiB
             capabilities: synchronous internal write-back
     *-cache
          description: L1 cache
          physical id: b
          slot: Internal Cache
          size: 128KiB
          capacity: 128KiB
          capabilities: synchronous internal write-back
     *-memory
          description: System Memory
          physical id: 25
          slot: System board or motherboard
          size: 4GiB
        *-bank:0
             description: DIMM 1333 MHz (0,8 ns)
             physical id: 0
             slot: A0
             size: 2GiB
             width: 64 bits
             clock: 1333MHz (0.8ns)
        *-bank:1
             description: DIMM 1333 MHz (0,8 ns)
             physical id: 1
             slot: A1
             size: 2GiB
             width: 64 bits
             clock: 1333MHz (0.8ns)
        *-bank:2
             description: DIMM 1333 MHz (0,8 ns) [empty]
             physical id: 2
             slot: A2
             width: 64 bits
             clock: 1333MHz (0.8ns)
        *-bank:3
             description: DIMM 1333 MHz (0,8 ns) [empty]
             physical id: 3
             slot: A3
             width: 64 bits
             clock: 1333MHz (0.8ns)
     *-pci:0
          description: Host bridge
          product: RX780/RX790 Host Bridge
          vendor: Advanced Micro Devices, Inc. [AMD/ATI]
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 00
          width: 64 bits
          clock: 66MHz
          configuration: latency=32
        *-pci:0
             description: PCI bridge
             product: RX780/RD790 PCI to PCI bridge (external gfx0 port A)
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 2
             bus info: pci@0000:00:02.0
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:40 ioport:e000(size=4096) memory:fdf00000-fdffffff ioport:d0000000(size=268435456)
           *-display
                description: VGA compatible controller
                product: RV770 LE [Radeon HD 4830]
                vendor: Advanced Micro Devices, Inc. [AMD/ATI]
                physical id: 0
                bus info: pci@0000:01:00.0
                version: 00
                width: 64 bits
                clock: 33MHz
                capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
                configuration: driver=radeon latency=0
                resources: irq:44 memory:d0000000-dfffffff memory:fdfe0000-fdfeffff ioport:ee00(size=256) memory:fdf00000-fdf1ffff
           *-multimedia
                description: Audio device
                product: RV770 HDMI Audio [Radeon HD 4850/4870]
                vendor: Advanced Micro Devices, Inc. [AMD/ATI]
                physical id: 0.1
                bus info: pci@0000:01:00.1
                version: 00
                width: 64 bits
                clock: 33MHz
                capabilities: pm pciexpress msi bus_master cap_list
                configuration: driver=snd_hda_intel latency=0
                resources: irq:45 memory:fdffc000-fdffffff
        *-pci:1
             description: PCI bridge
             product: RD790 PCI to PCI bridge (PCI express gpp port F)
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: a
             bus info: pci@0000:00:0a.0
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:41 ioport:d000(size=4096) memory:fde00000-fdefffff ioport:fdb00000(size=1048576)
           *-network
                description: Ethernet interface
                product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
                vendor: Realtek Semiconductor Co., Ltd.
                physical id: 0
                bus info: pci@0000:02:00.0
                logical name: eth0
                version: 02
                serial: 00:24:1d:2e:13:f8
                size: 100Mbit/s
                capacity: 1Gbit/s
                width: 64 bits
                clock: 33MHz
                capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.101 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
                resources: irq:43 ioport:de00(size=256) memory:fdbff000-fdbfffff memory:fdbe0000-fdbeffff memory:fde00000-fde0ffff
        *-storage
             description: SATA controller
             product: SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 11
             bus info: pci@0000:00:11.0
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: storage pm msi ahci_1.0 bus_master cap_list
             configuration: driver=ahci latency=32
             resources: irq:42 ioport:ff00(size=8) ioport:fe00(size=4) ioport:fd00(size=8) ioport:fc00(size=4) ioport:fb00(size=16) memory:fe02f000-fe02f3ff
        *-usb:0
             description: USB controller
             product: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 12
             bus info: pci@0000:00:12.0
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: ohci bus_master
             configuration: driver=ohci-pci latency=32
             resources: irq:16 memory:fe02e000-fe02efff
        *-usb:1
             description: USB controller
             product: SB7x0 USB OHCI1 Controller
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 12.1
             bus info: pci@0000:00:12.1
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: ohci bus_master
             configuration: driver=ohci-pci latency=32
             resources: irq:16 memory:fe02d000-fe02dfff
        *-usb:2
             description: USB controller
             product: SB7x0/SB8x0/SB9x0 USB EHCI Controller
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 12.2
             bus info: pci@0000:00:12.2
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=32
             resources: irq:17 memory:fe02c000-fe02c0ff
        *-usb:3
             description: USB controller
             product: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 13
             bus info: pci@0000:00:13.0
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: ohci bus_master
             configuration: driver=ohci-pci latency=32
             resources: irq:18 memory:fe02b000-fe02bfff
        *-usb:4
             description: USB controller
             product: SB7x0 USB OHCI1 Controller
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 13.1
             bus info: pci@0000:00:13.1
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: ohci bus_master
             configuration: driver=ohci-pci latency=32
             resources: irq:18 memory:fe02a000-fe02afff
        *-usb:5
             description: USB controller
             product: SB7x0/SB8x0/SB9x0 USB EHCI Controller
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 13.2
             bus info: pci@0000:00:13.2
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=32
             resources: irq:19 memory:fe029000-fe0290ff
        *-serial UNCLAIMED
             description: SMBus
             product: SBx00 SMBus Controller
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 14
             bus info: pci@0000:00:14.0
             version: 3c
             width: 32 bits
             clock: 66MHz
             capabilities: ht cap_list
             configuration: latency=0
        *-ide
             description: IDE interface
             product: SB7x0/SB8x0/SB9x0 IDE Controller
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 14.1
             bus info: pci@0000:00:14.1
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: ide msi bus_master cap_list
             configuration: driver=pata_atiixp latency=32
             resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:fa00(size=16)
        *-multimedia
             description: Audio device
             product: SBx00 Azalia (Intel HDA)
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 14.2
             bus info: pci@0000:00:14.2
             version: 00
             width: 64 bits
             clock: 33MHz
             capabilities: pm bus_master cap_list
             configuration: driver=snd_hda_intel latency=32
             resources: irq:16 memory:fe024000-fe027fff
        *-isa
             description: ISA bridge
             product: SB7x0/SB8x0/SB9x0 LPC host controller
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 14.3
             bus info: pci@0000:00:14.3
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: isa bus_master
             configuration: latency=0
        *-pci:2
             description: PCI bridge
             product: SBx00 PCI to PCI Bridge
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 14.4
             bus info: pci@0000:00:14.4
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: pci subtractive_decode bus_master vga_palette
             resources: ioport:c000(size=4096) memory:fdd00000-fddfffff memory:fdc00000-fdcfffff
           *-firewire
                description: FireWire (IEEE 1394)
                product: TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
                vendor: Texas Instruments
                physical id: e
                bus info: pci@0000:03:0e.0
                version: 00
                width: 32 bits
                clock: 33MHz
                capabilities: pm ohci bus_master cap_list
                configuration: driver=firewire_ohci latency=32 maxlatency=4 mingnt=2
                resources: irq:22 memory:fddff000-fddff7ff memory:fddf8000-fddfbfff
        *-usb:6
             description: USB controller
             product: SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 14.5
             bus info: pci@0000:00:14.5
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: ohci bus_master
             configuration: driver=ohci-pci latency=32
             resources: irq:18 memory:fe028000-fe028fff
     *-pci:1
          description: Host bridge
          product: Family 10h Processor HyperTransport Configuration
          vendor: Advanced Micro Devices, Inc. [AMD]
          physical id: 101
          bus info: pci@0000:00:18.0
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:2
          description: Host bridge
          product: Family 10h Processor Address Map
          vendor: Advanced Micro Devices, Inc. [AMD]
          physical id: 102
          bus info: pci@0000:00:18.1
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:3
          description: Host bridge
          product: Family 10h Processor DRAM Controller
          vendor: Advanced Micro Devices, Inc. [AMD]
          physical id: 103
          bus info: pci@0000:00:18.2
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:4
          description: Host bridge
          product: Family 10h Processor Miscellaneous Control
          vendor: Advanced Micro Devices, Inc. [AMD]
          physical id: 104
          bus info: pci@0000:00:18.3
          version: 00
          width: 32 bits
          clock: 33MHz
          configuration: driver=k10temp
          resources: irq:0
     *-pci:5
          description: Host bridge
          product: Family 10h Processor Link Control
          vendor: Advanced Micro Devices, Inc. [AMD]
          physical id: 105
          bus info: pci@0000:00:18.4
          version: 00
          width: 32 bits
          clock: 33MHz
     *-scsi:0
          physical id: 1
          logical name: scsi0
          capabilities: emulated
        *-disk
             description: ATA Disk
             product: MAXTOR STM310003
             vendor: Maxtor
             physical id: 0.0.0
             bus info: scsi@0:0.0.0
             logical name: /dev/sda
             version: MX1A
             serial: 5QJ14XLS
             size: 931GiB (1TB)
             capabilities: partitioned partitioned:dos
             configuration: ansiversion=5 sectorsize=512 signature=0001eab1
           *-volume
                description: Windows NTFS volume
                physical id: 1
                bus info: scsi@0:0.0.0,1
                logical name: /dev/sda1
                version: 3.1
                serial: 98be40a6-1d10-7a47-9684-02eab492baf7
                size: 931GiB
                capacity: 931GiB
                capabilities: primary ntfs initialized
                configuration: clustersize=4096 created=2015-09-19 00:03:13 filesystem=ntfs label=New Volume state=clean
     *-scsi:1
          physical id: 2
          logical name: scsi1
          capabilities: emulated
        *-cdrom
             description: DVD-RAM writer
             product: DVD RW DRU-860S
             vendor: SONY
             physical id: 0.0.0
             bus info: scsi@1:0.0.0
             logical name: /dev/cdrom
             logical name: /dev/sr0
             version: 1.61
             capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
             configuration: ansiversion=5 status=nodisc
     *-scsi:2
          physical id: 3
          logical name: scsi3
          capabilities: emulated
        *-disk
             description: ATA Disk
             product: Samsung SSD 850
             physical id: 0.0.0
             bus info: scsi@3:0.0.0
             logical name: /dev/sdb
             version: 1B6Q
             serial: S21MNWAG611178T
             size: 232GiB (250GB)
             capabilities: partitioned partitioned:dos
             configuration: ansiversion=5 sectorsize=512 signature=1ddec038
           *-volume:0
                description: Windows NTFS volume
                physical id: 1
                bus info: scsi@3:0.0.0,1
                logical name: /dev/sdb1
                version: 3.1
                serial: 4687fab0-07be-da4d-b406-b5ba75021695
                size: 98MiB
                capacity: 100MiB
                capabilities: primary bootable ntfs initialized
                configuration: clustersize=4096 created=2015-08-20 06:44:39 filesystem=ntfs label=System Reserved state=clean
           *-volume:1
                description: Windows NTFS volume
                physical id: 2
                bus info: scsi@3:0.0.0,2
                logical name: /dev/sdb2
                version: 3.1
                serial: 00045f61-01b6-7e4e-8799-d4e06a04e12a
                size: 146GiB
                capacity: 146GiB
                capabilities: primary ntfs initialized
                configuration: clustersize=4096 created=2015-08-20 06:45:06 filesystem=ntfs state=clean
           *-volume:2
                description: Extended partition
                physical id: 3
                bus info: scsi@3:0.0.0,3
                logical name: /dev/sdb3
                size: 86GiB
                capacity: 86GiB
                capabilities: primary extended partitioned partitioned:extended
              *-logicalvolume:0
                   description: Linux swap / Solaris partition
                   physical id: 5
                   logical name: /dev/sdb5
                   capacity: 1929MiB
                   capabilities: nofs
              *-logicalvolume:1
                   description: Linux filesystem partition
                   physical id: 6
                   logical name: /dev/sdb6
                   logical name: /
                   capacity: 84GiB
                   configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered state=mounted
     *-scsi:3
          physical id: 5
          bus info: usb@5:3
          logical name: scsi6
          capabilities: emulated scsi-host
          configuration: driver=usb-storage
        *-disk:0
             description: SCSI Disk
             physical id: 0.0.0
             bus info: scsi@6:0.0.0
             logical name: /dev/sdc
             configuration: sectorsize=512
        *-disk:1
             description: SCSI Disk
             physical id: 0.0.1
             bus info: scsi@6:0.0.1
             logical name: /dev/sdd
             configuration: sectorsize=512
        *-disk:2
             description: SCSI Disk
             physical id: 0.0.2
             bus info: scsi@6:0.0.2
             logical name: /dev/sde
             configuration: sectorsize=512
        *-disk:3
             description: SCSI Disk
             physical id: 0.0.3
             bus info: scsi@6:0.0.3
             logical name: /dev/sdf
             configuration: sectorsize=512

[heartsmagic]

Neden iki ip adresi görünüyor orada? Ayrıca eğer IP adresi 192.168.1.x gibi bir şeyse, gw'in 192.168.1.1 gibi bir şey olması lazım. Normalde nasıl IP alıyor bu sistem? Ona göre bir ayarlama yaptıralım sana.
Verdiğin bağlantılar r8168 modülünü kullanmayı anlatıyor, sende ise zaten bu modül devrede. Sıkıntı olan 8169, çok yaşıyoruz bu sorunu Realtek kartlarda, fazlaca üzüyor yani bizi. Sürücü oluyor, bu sefer yeni çekirdeklerde derlenmiyor falan.

Sen önce şu sabit IP adresi meselesini düzgünce bir hallet, o kısmı geçelim.

[spider909]

Neden iki ip adresi görünüyor orada? Ayrıca eğer IP adresi 192.168.1.x gibi bir şeyse, gw'in 192.168.1.1 gibi bir şey olması lazım. Normalde nasıl IP alıyor bu sistem? Ona göre bir ayarlama yaptıralım sana.
Verdiğin bağlantılar r8168 modülünü kullanmayı anlatıyor, sende ise zaten bu modül devrede. Sıkıntı olan 8169, çok yaşıyoruz bu sorunu Realtek kartlarda, fazlaca üzüyor yani bizi. Sürücü oluyor, bu sefer yeni çekirdeklerde derlenmiyor falan.

Sen önce şu sabit IP adresi meselesini düzgünce bir hallet, o kısmı geçelim.

Sabit ip atamayı başardım sanırım. Ama yine otomatik bağlanmadı, çıkar-tak yaparak bağlandım ama garip bişey oldu ki sağ alttaki bağlantı simgesi bağlı gözükmüyor. Bağlantı yokmuş gibi gösteriyor ama internete girebiliyorum ve bağlantı var yani diğer her uygulamada.

ifconfig :

Kod Seç Genişlet

eth0      Link encap:Ethernet  HWaddr 00:24:1d:2e:13:f8 
          inet addr:192.168.1.70  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:339 errors:0 dropped:0 overruns:0 frame:0
          TX packets:372 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:148191 (148.1 KB)  TX bytes:48048 (48.0 KB)
          Interrupt:43 Base address:0xe000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:209 errors:0 dropped:0 overruns:0 frame:0
          TX packets:209 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:43325 (43.3 KB)  TX bytes:43325 (43.3 KB)

etc/network/interfaces dosyasının içeriği:

Kod Seç Genişlet

# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo eth0
iface lo inet loopback
iface eth0 inet static
address 192.168.1.70
netmask  255.255.255.0
gateway 192.168.1.1
dns-nameservers 8.8.8.8

Ayrıca şunu farkettim. Kabloyu çıkarıp takarken ethernet girişindeki ışıklar yanmıyor. Yeşil ve sarı led hiç bir şekilde yanıp sönmüyor. Takıp çıkarıyorum ışıklar yanmaya başladığında internet gelmiş demek oluyor o zaman duruyorum.

[heartsmagic]

Donanımsal bir sorun olmadığına eminsin değil mi?
Sabit Ip ayarı tamam gibi duruyor. Sistem ilk açıldığında kabloyu falan hiç söküp takmadan doğrudan ilgili çıktıları geçer misin buraya?

[spider909]

Donanımsal bir sorun olmadığına eminsin değil mi?
Sabit Ip ayarı tamam gibi duruyor. Sistem ilk açıldığında kabloyu falan hiç söküp takmadan doğrudan ilgili çıktıları geçer misin buraya?

Donanımsal sorun olmadığına eminim çünkü aynı bilgisayarda Windows'da kurulu ve Windows'da sorunsuz bir şekilde çalışıyor.
Sistem açıldığında internet bağlantısı sağlanmadığında hiç bir işlem yapmadan girdiğim komutlar ve çıktıları:

Kod Seç Genişlet

torak@torak-GA-MA770T-UD3P ~ $ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:24:1d:2e:13:f8 
          inet addr:192.168.1.70  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:42 Base address:0x4000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:139 errors:0 dropped:0 overruns:0 frame:0
          TX packets:139 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:35757 (35.7 KB)  TX bytes:35757 (35.7 KB)

torak@torak-GA-MA770T-UD3P ~ $ dmesg | tail
[   29.286207] sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[   29.586122] sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[   29.616312] vboxdrv: Found 3 processor cores
[   29.634540] vboxdrv: TSC mode is Invariant, tentative frequency 2611790869 Hz
[   29.634550] vboxdrv: Successfully loaded version 5.0.2 (interface 0x00230003)
[   29.839117] VBoxNetFlt: Successfully started.
[   29.843362] VBoxNetAdp: Successfully started.
[   29.847008] VBoxPciLinuxInit
[   29.849538] vboxpci: IOMMU not found (not registered)
[   29.950221] init: plymouth-stop pre-start process (1773) terminated with status 1


[heartsmagic]

Tekrar zahmet olacak ancak yine sistem açılır açılmaz, sorun yaşandığı anda bu çıktıyı ve şunları geçer misin:

Kod Seç Genişlet

ifconfig
route -n
ping 192.168.1.1
ping 173.194.46.72

Ancak belirttiğim gibi, bu çıktıların sorun yaşandığı anda verilmesi önemli.

[spider909]

Tekrar zahmet olacak ancak yine sistem açılır açılmaz, sorun yaşandığı anda bu çıktıyı ve şunları geçer misin:

Kod Seç Genişlet

ifconfig
route -n
ping 192.168.1.1
ping 173.194.46.72

Ancak belirttiğim gibi, bu çıktıların sorun yaşandığı anda verilmesi önemli.

Dediğiniz gibi baştan başlattım ve bağlantı gelmediğini görünce komtuları yazdım.

Kod Seç Genişlet

torak@torak-GA-MA770T-UD3P ~ $ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:24:1d:2e:13:f8 
          inet addr:192.168.1.70  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:42 Base address:0x4000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:119 errors:0 dropped:0 overruns:0 frame:0
          TX packets:119 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:33997 (33.9 KB)  TX bytes:33997 (33.9 KB)

torak@torak-GA-MA770T-UD3P ~ $ route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.1.1     0.0.0.0         UG    0      0        0 eth0
169.254.0.0     0.0.0.0         255.255.0.0     U     1000   0        0 eth0
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0
torak@torak-GA-MA770T-UD3P ~ $ ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
From 192.168.1.70 icmp_seq=1 Destination Host Unreachable
From 192.168.1.70 icmp_seq=2 Destination Host Unreachable
From 192.168.1.70 icmp_seq=3 Destination Host Unreachable
From 192.168.1.70 icmp_seq=4 Destination Host Unreachable
From 192.168.1.70 icmp_seq=5 Destination Host Unreachable
From 192.168.1.70 icmp_seq=6 Destination Host Unreachable
From 192.168.1.70 icmp_seq=7 Destination Host Unreachable
^X^Z
[1]+  Stopped                 ping 192.168.1.1
torak@torak-GA-MA770T-UD3P ~ $ ping 173.194.46.72
PING 173.194.46.72 (173.194.46.72) 56(84) bytes of data.
From 192.168.1.70 icmp_seq=1 Destination Host Unreachable
From 192.168.1.70 icmp_seq=2 Destination Host Unreachable
From 192.168.1.70 icmp_seq=3 Destination Host Unreachable
From 192.168.1.70 icmp_seq=4 Destination Host Unreachable
From 192.168.1.70 icmp_seq=5 Destination Host Unreachable
From 192.168.1.70 icmp_seq=6 Destination Host Unreachable
From 192.168.1.70 icmp_seq=7 Destination Host Unreachable
^C
--- 173.194.46.72 ping statistics ---
7 packets transmitted, 0 received, +7 errors, 100% packet loss, time 6000ms
pipe 3
torak@torak-GA-MA770T-UD3P ~ $


[heartsmagic]

IP alıyor gibi görünüyor ancak modemi dahi pingleyemiyorsun. Şu an için cidden önerilerim tükendi. Şu çıktıyı buraya geç, bir ara bakınmaya çalışalım tekrar:

Kod Seç Genişlet

dmesg | grep eth0

Uzunca bir süre ses çıkmazsa bizden başlığa bir ileti geçersin ama. Unutma ihtimalimiz çok yüksek çünkü.

[spider909]

IP alıyor gibi görünüyor ancak modemi dahi pingleyemiyorsun. Şu an için cidden önerilerim tükendi. Şu çıktıyı buraya geç, bir ara bakınmaya çalışalım tekrar:

Kod Seç Genişlet

dmesg | grep eth0

Uzunca bir süre ses çıkmazsa bizden başlığa bir ileti geçersin ama. Unutma ihtimalimiz çok yüksek çünkü.

Kod Seç Genişlet

[    1.606772] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90000792000, 00:24:1d:2e:13:f8, XID 1c4000c0 IRQ 27
[    1.606775] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    6.539083] r8169 0000:02:00.0 eth0: link down
[    6.539129] r8169 0000:02:00.0 eth0: link down

[heartsmagic]

Burada neden 8169 görünüyor acaba? Yüklü modüller arasında da yok kendisi aslında. En azından ilk iletilerde görünmüyor. Şimdi, yanlış bakınmadıysam bu kart için sistem r8169 modülünü kullanıyormuş, o da sıkıntılıymış. Sırf bu nedenle insanlar Realtek'in sağladığı r8168 modülünü derleyip kullanıyorlar. Sen de zaten bunu kullanıyorum demişsin. Son çıktındaki r8169 modülü garibime gitti. Her ihtimale karşı şunu yap:

Kod Seç Genişlet


echo "blacklist r8169" | sudo tee -a /etc/modprobe.d/blacklist.conf

Sonra sistemi yeniden başlatıp bir denersin. Bu arada, BIOS tarafında WoL özelliği var mı? Ağ üzerinen makineyi ayağa kaldırma yani. İsmi WoL olabilir ya da buna benzer ağ üzerinden uyandırma ile ilgili bir şey olabilir.