Gönderen Konu: 14.04.3 i386 başlangıçta donma problemi  (Okunma sayısı 900 defa)

0 Üye ve 1 Ziyaretçi konuyu incelemekte.

« : »
Kurulumu başarılı bir şekilde tamamlıyorum. Yeniden  başlat diyorum ubuntu  açılıyor ve şifre istiyor. Şifreyi girip entera basınca ekran donuyor , menü çubuğu gelmiyor ve klavye kilitleniyor.( Capslock tuşuna bassamda  ışığı yanmıyor) 6-7  kere denedim. Hepsinde aynı problem var. Ekran kartından şüpheleniyorum. Ama hiç bir  dayanağım yok sadece şüphe.

Çok da  istekliyim Ubuntu  kullanmaya...

İşletim sistemi                            :   Windows 7 32 bit
En son kurulum yapmaya çalıştığım :   14.04.3 i386

« Yanıtla #1 : »
https://forum.ubuntu-tr.net/index.php?topic=33412.0

şu çıktıları verebilirseniz iyi olur ayrıca pc model marka belirtin çift ekran kartınız var mı ?

« Yanıtla #2 : »


Geforce 7500 LE  ekran kartı .Çift ekran kartım yok. PC : HP Media Center m7000 Desktop PC serie.

Ubuntuda çıktı alamıyorum çünkü komut satırına giremiyorum.

Teşekkürler cevabınız için.

« Yanıtla #3 : »
yukarıdaki çıktıları ctrl+alt+f2 veya f3-4-5 ila açılan tty ekranınan kullanıcı adı ve şifre girerek ulaşırsınız alt f7 ile çıkarsınız

« Yanıtla #4 : »
Klavyeyi kilitliyor. Klavye  çalışmıyor.

« Yanıtla #5 : »
Ctrl+alt+f1 ile tty ekranına düşebiliyormusunuz peki o durumda?

« Yanıtla #6 : »
Akşam eve gidince birde passwordu girmeden  deneyebilirim. Passwordu girdikten sonra klavyeyi kilitliyor.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 12 Kasım 2015 - 20:00:42
Merhaba ;

Evet pasword girmeden tty ye girilebiliyormuş.:)
« Son Düzenleme: 12 Kasım 2015 - 20:00:44 Gönderen: ibrahimsoze »

« Yanıtla #7 : »
konuk oturumu açabiliyor musunuz ? hiç denediniz mi
« Son Düzenleme: 12 Kasım 2015 - 21:00:07 Gönderen: eral »

« Yanıtla #8 : »
Cevap için teşekkür ederim. Yeniden  yaptım aynı  sonuç.




Konuk oturum denediğimde de aynı sonuçla karşılaşıyorum. Yukarıdaki resimdeki gibi boş bir ekran ve klavye kilitleniyor.
« Son Düzenleme: 12 Kasım 2015 - 21:19:24 Gönderen: ibrahimsoze »

« Yanıtla #9 : »
@ibrahimsoze, çekirdek önyükleme seçeneklerinden[1] nomodeset seçeneğini kullanarak başlatında durum nedir?

Masaüstüne giriş yapmayı denedikten sonra ctrl+alt+f1 > kullanıcı adı + şifre >
Kod: [Seç]
sudo apt-get install pastebinit
cat /var/log/Xorg.0.log | pastebinit
cat /var/log/lightdm/lightdm.log | pastebinit
dmesg | pastebinit

komutlarını verin. Bu komutların her biri bir bağlantı üretecek. Bu bağlantıları buraya geçin.

[1] http://wiki.ubuntu-tr.net/index.php?title=%C3%87ekirdek_%C3%B6ny%C3%BCkleme_se%C3%A7enekleri

« Yanıtla #10 : »
Merhaba @if

Dediğinizi  yaptım. Şu anda çalışıyor  ama ekran çözünürlüğü düşük. Bir  ara yazılım güncellemeden ek sürücüleri  açtım.x.org x server  işaretliydi.Onu nvidia seçip değiştir dedim. Busefer masaüstünü açtı  ama görüntüler çizik çizik ti  ve çok  ağır  çalışıp bir süre  sonra  program bir  sorunla  karşılaştı deyip kendini kapatıyordu. Şimdi en baştan dediğiniz gibi kurulum yaptım ama bu sefer 15.10 sürümünü yükledim haberiniz olsun...

tty de yazılanları nasıl çıktı alacağımı bilmiyorum. İnternetten araştırıp  yapacağım. Teşekkürler...
Kod: [Seç]
[    17.415]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[    17.415] X Protocol Version 11, Revision 0
[    17.415] Build Operating System: Linux 3.19.0-30-generic i686 Ubuntu
[    17.415] Current Operating System: Linux soze-RP867AA-AB8-m7645-tr 4.2.0-16-generic #19-Ubuntu SMP Thu Oct 8 14:46:51 UTC 2015 i686
[    17.415] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-16-generic root=UUID=f8f1315e-709e-4f51-8a99-dd6be856a775 ro nomodeset quiet splash vt.handoff=7
[    17.415] Build Date: 30 September 2015  09:08:48AM
[    17.415] xorg-server 2:1.17.2-1ubuntu9 (For technical support please see http://www.ubuntu.com/support)
[    17.415] Current version of pixman: 0.32.6
[    17.415] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    17.415] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    17.416] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 15 10:01:31 2015
[    17.434] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    17.482] (==) No Layout section.  Using the first Screen section.
[    17.482] (==) No screen section available. Using defaults.
[    17.482] (**) |-->Screen "Default Screen Section" (0)
[    17.482] (**) |   |-->Monitor "<default monitor>"
[    17.482] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    17.482] (==) Automatically adding devices
[    17.482] (==) Automatically enabling devices
[    17.482] (==) Automatically adding GPU devices
[    17.482] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    17.482] Entry deleted from font path.
[    17.482] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    17.482] Entry deleted from font path.
[    17.482] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    17.482] Entry deleted from font path.
[    17.482] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    17.482] Entry deleted from font path.
[    17.482] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    17.482] Entry deleted from font path.
[    17.482] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[    17.482] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    17.482] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    17.482] (II) Loader magic: 0x8029b6c0
[    17.482] (II) Module ABI versions:
[    17.482] X.Org ANSI C Emulation: 0.4
[    17.482] X.Org Video Driver: 19.0
[    17.482] X.Org XInput driver : 21.0
[    17.482] X.Org Server Extension : 9.0
[    17.484] (--) PCI:*(0:1:0:0) 10de:01dd:1043:034b rev 161, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[    17.484] (II) LoadModule: "glx"
[    17.511] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    17.585] (II) Module glx: vendor="X.Org Foundation"
[    17.585] compiled for 1.17.2, module version = 1.0.0
[    17.585] ABI class: X.Org Server Extension, version 9.0
[    17.585] (==) AIGLX enabled
[    17.585] (==) Matched nvidia as autoconfigured driver 0
[    17.585] (==) Matched nouveau as autoconfigured driver 1
[    17.585] (==) Matched modesetting as autoconfigured driver 2
[    17.585] (==) Matched fbdev as autoconfigured driver 3
[    17.585] (==) Matched vesa as autoconfigured driver 4
[    17.586] (==) Assigned the driver to the xf86ConfigLayout
[    17.586] (II) LoadModule: "nvidia"
[    17.586] (WW) Warning, couldn't open module nvidia
[    17.586] (II) UnloadModule: "nvidia"
[    17.586] (II) Unloading nvidia
[    17.586] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    17.586] (II) LoadModule: "nouveau"
[    17.586] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    17.614] (II) Module nouveau: vendor="X.Org Foundation"
[    17.614] compiled for 1.17.1, module version = 1.0.11
[    17.614] Module class: X.Org Video Driver
[    17.614] ABI class: X.Org Video Driver, version 19.0
[    17.614] (II) LoadModule: "modesetting"
[    17.615] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    17.625] (II) Module modesetting: vendor="X.Org Foundation"
[    17.625] compiled for 1.17.2, module version = 1.17.2
[    17.625] Module class: X.Org Video Driver
[    17.625] ABI class: X.Org Video Driver, version 19.0
[    17.625] (II) LoadModule: "fbdev"
[    17.625] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    17.637] (II) Module fbdev: vendor="X.Org Foundation"
[    17.637] compiled for 1.17.1, module version = 0.4.4
[    17.637] Module class: X.Org Video Driver
[    17.637] ABI class: X.Org Video Driver, version 19.0
[    17.637] (II) LoadModule: "vesa"
[    17.637] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    17.640] (II) Module vesa: vendor="X.Org Foundation"
[    17.640] compiled for 1.17.1, module version = 2.3.4
[    17.640] Module class: X.Org Video Driver
[    17.640] ABI class: X.Org Video Driver, version 19.0
[    17.640] (==) Matched nvidia as autoconfigured driver 0
[    17.640] (==) Matched nouveau as autoconfigured driver 1
[    17.640] (==) Matched modesetting as autoconfigured driver 2
[    17.640] (==) Matched fbdev as autoconfigured driver 3
[    17.640] (==) Matched vesa as autoconfigured driver 4
[    17.640] (==) Assigned the driver to the xf86ConfigLayout
[    17.640] (II) LoadModule: "nvidia"
[    17.640] (WW) Warning, couldn't open module nvidia
[    17.640] (II) UnloadModule: "nvidia"
[    17.640] (II) Unloading nvidia
[    17.640] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    17.640] (II) LoadModule: "nouveau"
[    17.641] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    17.641] (II) Module nouveau: vendor="X.Org Foundation"
[    17.641] compiled for 1.17.1, module version = 1.0.11
[    17.641] Module class: X.Org Video Driver
[    17.641] ABI class: X.Org Video Driver, version 19.0
[    17.641] (II) UnloadModule: "nouveau"
[    17.641] (II) Unloading nouveau
[    17.641] (II) Failed to load module "nouveau" (already loaded, 0)
[    17.641] (II) LoadModule: "modesetting"
[    17.641] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    17.641] (II) Module modesetting: vendor="X.Org Foundation"
[    17.641] compiled for 1.17.2, module version = 1.17.2
[    17.641] Module class: X.Org Video Driver
[    17.641] ABI class: X.Org Video Driver, version 19.0
[    17.641] (II) UnloadModule: "modesetting"
[    17.641] (II) Unloading modesetting
[    17.641] (II) Failed to load module "modesetting" (already loaded, 0)
[    17.641] (II) LoadModule: "fbdev"
[    17.641] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    17.641] (II) Module fbdev: vendor="X.Org Foundation"
[    17.641] compiled for 1.17.1, module version = 0.4.4
[    17.641] Module class: X.Org Video Driver
[    17.641] ABI class: X.Org Video Driver, version 19.0
[    17.641] (II) UnloadModule: "fbdev"
[    17.641] (II) Unloading fbdev
[    17.641] (II) Failed to load module "fbdev" (already loaded, 0)
[    17.641] (II) LoadModule: "vesa"
[    17.641] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    17.641] (II) Module vesa: vendor="X.Org Foundation"
[    17.641] compiled for 1.17.1, module version = 2.3.4
[    17.641] Module class: X.Org Video Driver
[    17.641] ABI class: X.Org Video Driver, version 19.0
[    17.641] (II) UnloadModule: "vesa"
[    17.641] (II) Unloading vesa
[    17.642] (II) Failed to load module "vesa" (already loaded, 0)
[    17.642] (II) NOUVEAU driver Date:   Thu Aug 28 03:57:48 2014 +0200
[    17.642] (II) NOUVEAU driver for NVIDIA chipset families :
[    17.642] RIVA TNT        (NV04)
[    17.642] RIVA TNT2       (NV05)
[    17.642] GeForce 256     (NV10)
[    17.642] GeForce 2       (NV11, NV15)
[    17.642] GeForce 4MX     (NV17, NV18)
[    17.642] GeForce 3       (NV20)
[    17.642] GeForce 4Ti     (NV25, NV28)
[    17.642] GeForce FX      (NV3x)
[    17.642] GeForce 6       (NV4x)
[    17.642] GeForce 7       (G7x)
[    17.642] GeForce 8       (G8x)
[    17.642] GeForce GTX 200 (NVA0)
[    17.642] GeForce GTX 400 (NVC0)
[    17.642] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    17.642] (II) FBDEV: driver for framebuffer: fbdev
[    17.642] (II) VESA: driver for VESA chipsets: vesa
[    17.642] (++) using VT number 7

[    17.642] (EE) [drm] KMS not enabled
[    17.642] (EE) [drm] KMS not enabled
[    17.642] (EE) open /dev/dri/card0: No such file or directory
[    17.642] (EE) open /dev/dri/card0: No such file or directory
[    17.642] (WW) Falling back to old probe method for modesetting
[    17.642] (EE) open /dev/dri/card0: No such file or directory
[    17.642] (EE) open /dev/dri/card0: No such file or directory
[    17.642] (II) Loading sub module "fbdevhw"
[    17.642] (II) LoadModule: "fbdevhw"
[    17.643] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    17.652] (II) Module fbdevhw: vendor="X.Org Foundation"
[    17.652] compiled for 1.17.2, module version = 0.0.2
[    17.652] ABI class: X.Org Video Driver, version 19.0
[    17.652] (**) FBDEV(2): claimed PCI slot 1@0:0:0
[    17.652] (II) FBDEV(2): using default device
[    17.652] (WW) Falling back to old probe method for vesa
[    17.652] (EE) Screen 0 deleted because of no matching config section.
[    17.652] (II) UnloadModule: "modesetting"
[    17.652] (EE) Screen 0 deleted because of no matching config section.
[    17.652] (II) UnloadModule: "modesetting"
[    17.652] (II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    17.652] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[    17.652] (==) FBDEV(0): RGB weight 888
[    17.652] (==) FBDEV(0): Default visual is TrueColor
[    17.652] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[    17.652] (II) FBDEV(0): hardware: VESA VGA (video memory: 3072kB)
[    17.652] (II) FBDEV(0): checking modes against framebuffer device...
[    17.652] (II) FBDEV(0): checking modes against monitor...
[    17.652] (--) FBDEV(0): Virtual size is 1024x768 (pitch 1024)
[    17.652] (**) FBDEV(0):  Built-in mode "current": 78.7 MHz, 59.9 kHz, 75.7 Hz
[    17.652] (II) FBDEV(0): Modeline "current"x0.0   78.65  1024 1056 1184 1312  768 772 776 792 -hsync -vsync -csync (59.9 kHz b)
[    17.652] (==) FBDEV(0): DPI set to (96, 96)
[    17.652] (II) Loading sub module "fb"
[    17.652] (II) LoadModule: "fb"
[    17.653] (II) Loading /usr/lib/xorg/modules/libfb.so
[    17.662] (II) Module fb: vendor="X.Org Foundation"
[    17.662] compiled for 1.17.2, module version = 1.0.0
[    17.662] ABI class: X.Org ANSI C Emulation, version 0.4
[    17.662] (**) FBDEV(0): using shadow framebuffer
[    17.662] (II) Loading sub module "shadow"
[    17.662] (II) LoadModule: "shadow"
[    17.662] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    17.663] (II) Module shadow: vendor="X.Org Foundation"
[    17.663] compiled for 1.17.2, module version = 1.1.0
[    17.663] ABI class: X.Org ANSI C Emulation, version 0.4
[    17.663] (II) UnloadModule: "vesa"
[    17.663] (II) Unloading vesa
[    17.663] (==) Depth 24 pixmap format is 32 bpp
[    17.663] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[    17.680] (==) FBDEV(0): Backing store enabled
[    17.681] (==) FBDEV(0): DPMS enabled
[    17.681] (==) RandR enabled
[    17.690] (II) SELinux: Disabled on system
[    17.692] (II) AIGLX: Screen 0 is not DRI2 capable
[    17.692] (EE) AIGLX: reverting to software rendering
[    18.199] (II) AIGLX: Loaded and initialized swrast
[    18.199] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    18.234] (II) XKB: generating xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    18.368] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    18.368] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.368] (II) LoadModule: "evdev"
[    18.368] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.385] (II) Module evdev: vendor="X.Org Foundation"
[    18.385] compiled for 1.17.1, module version = 2.9.2
[    18.385] Module class: X.Org XInput Driver
[    18.385] ABI class: X.Org XInput driver, version 21.0
[    18.385] (II) Using input driver 'evdev' for 'Power Button'
[    18.385] (**) Power Button: always reports core events
[    18.385] (**) evdev: Power Button: Device: "/dev/input/event1"
[    18.385] (--) evdev: Power Button: Vendor 0 Product 0x1
[    18.385] (--) evdev: Power Button: Found keys
[    18.385] (II) evdev: Power Button: Configuring as keyboard
[    18.385] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    18.385] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    18.385] (**) Option "xkb_rules" "evdev"
[    18.385] (**) Option "xkb_model" "pc105"
[    18.385] (**) Option "xkb_layout" "tr"
[    18.390] (II) XKB: generating xkmfile /var/lib/xkb/server-609880D4F1521A95A29BCD7AB1227A69EC9A1B72.xkm
[    18.411] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    18.411] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.411] (II) Using input driver 'evdev' for 'Power Button'
[    18.411] (**) Power Button: always reports core events
[    18.412] (**) evdev: Power Button: Device: "/dev/input/event0"
[    18.412] (--) evdev: Power Button: Vendor 0 Product 0x1
[    18.412] (--) evdev: Power Button: Found keys
[    18.412] (II) evdev: Power Button: Configuring as keyboard
[    18.412] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    18.412] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    18.412] (**) Option "xkb_rules" "evdev"
[    18.412] (**) Option "xkb_model" "pc105"
[    18.412] (**) Option "xkb_layout" "tr"
[    18.412] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event4)
[    18.413] (II) No input driver specified, ignoring this device.
[    18.413] (II) This device may have been added with another device file.
[    18.413] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event5)
[    18.413] (II) No input driver specified, ignoring this device.
[    18.413] (II) This device may have been added with another device file.
[    18.414] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event6)
[    18.414] (II) No input driver specified, ignoring this device.
[    18.414] (II) This device may have been added with another device file.
[    18.414] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    18.414] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    18.414] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    18.414] (**) AT Translated Set 2 keyboard: always reports core events
[    18.414] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[    18.414] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    18.414] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    18.414] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    18.414] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    18.414] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[    18.414] (**) Option "xkb_rules" "evdev"
[    18.414] (**) Option "xkb_model" "pc105"
[    18.414] (**) Option "xkb_layout" "tr"
[    18.415] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event3)
[    18.415] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[    18.415] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[    18.415] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[    18.415] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event3"
[    18.415] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[    18.415] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[    18.415] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[    18.415] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[    18.415] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[    18.415] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[    18.415] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[    18.415] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[    18.415] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    18.415] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event3"
[    18.416] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 9)
[    18.416] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[    18.416] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[    18.416] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[    18.416] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[    18.416] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[    18.416] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[    18.416] (II) No input driver specified, ignoring this device.
[    18.416] (II) This device may have been added with another device file.
[    18.426] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[    42.991] (II) XKB: reuse xkmfile /var/lib/xkb/server-609880D4F1521A95A29BCD7AB1227A69EC9A1B72.xkm
[    47.175] (II) XKB: reuse xkmfile /var/lib/xkb/server-609880D4F1521A95A29BCD7AB1227A69EC9A1B72.xkm
[    47.551] (II) XKB: reuse xkmfile /var/lib/xkb/server-609880D4F1521A95A29BCD7AB1227A69EC9A1B72.xkm
[    47.556] (II) XKB: reuse xkmfile /var/lib/xkb/server-609880D4F1521A95A29BCD7AB1227A69EC9A1B72.xkm
[    47.561] (II) XKB: reuse xkmfile /var/lib/xkb/server-609880D4F1521A95A29BCD7AB1227A69EC9A1B72.xkm
[    47.646] (II) XKB: generating xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[    47.676] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[    47.690] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[    58.924] (II) XKB: generating xkmfile /var/lib/xkb/server-537117F348018747C40C45211F44A7B17FE3C7EE.xkm
[   747.832] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[   747.832] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[   747.839] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  9331.469] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  9515.885] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  9515.913] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[  9515.954] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[  9516.018] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[  9573.423] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  9573.558] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[  9573.585] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[  9573.605] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[  9951.236] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  9951.332] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[  9951.360] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[  9951.372] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[ 10945.052] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 10945.212] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[ 10945.250] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[ 10945.266] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[ 10971.733] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 10971.870] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[ 10971.914] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[ 10971.929] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[ 10992.644] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 10992.826] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[ 10992.862] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[ 10992.894] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[ 11062.601] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 11062.783] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[ 11062.811] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[ 11062.850] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[ 11294.042] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 11294.232] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[ 11294.267] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[ 11294.299] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
Kod: [Seç]
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.0-16-generic (buildd@lgw01-22) (gcc version 5.2.1 20151003 (Ubuntu 5.2.1-21ubuntu2) ) #19-Ubuntu SMP Thu Oct 8 14:46:51 UTC 2015 (Ubuntu 4.2.0-16.19-generic 4.2.3)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000096bff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000096c00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfedf7ff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfedf800-0x00000000bfedffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bfee0000-0x00000000bfee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfee3000-0x00000000bfeeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bfef0000-0x00000000bfefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: HP Pavilion 061 RP867AA-AB8 m7645.tr/Basswood, BIOS  3.07 08/31/2006
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xbfedf max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CEFFF write-protect
[    0.000000]   CF000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BFF00000 mask FFFF00000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3071MB, range: 1MB, type UC
[    0.000000] total RAM covered: 3071M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 2M num_reg: 3  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3071MB, range: 1MB, type UC
[    0.000000] found SMP MP-table at [mem 0x000f5fb0-0x000f5fbf] mapped at [c00f5fb0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
[    0.000000] Base memory trampoline at [c0092000] 92000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[    0.000000]  [mem 0x37800000-0x379fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20000000-0x377fffff]
[    0.000000]  [mem 0x20000000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] BRK [0x01cdc000, 0x01cdcfff] PGTABLE
[    0.000000] BRK [0x01cdd000, 0x01cddfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x34128000-0x3608bfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F7D30 000014 (v00 HP-CPC)
[    0.000000] ACPI: RSDT 0x00000000BFEE3040 000038 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 0x00000000BFEE30C0 000074 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 0x00000000BFEE3180 0044E3 (v01 HP-CPC AWRDACPI 00001000 MSFT 0100000E)
[    0.000000] ACPI: FACS 0x00000000BFEE0000 000040
[    0.000000] ACPI: MCFG 0x00000000BFEE77C0 00003C (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 0x00000000BFEE76C0 000084 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: SSDT 0x00000000BFEE7840 00015C (v01 HP-CPC Cpu0Ist  00003000 INTL 20040311)
[    0.000000] ACPI: SSDT 0x00000000BFEE7CD0 000275 (v01 HP-CPC CpuPm    00003000 INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2178MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x0000000037bfdfff]
[    0.000000]   HighMem  [mem 0x0000000037bfe000-0x00000000bfedefff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000095fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bfedefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bfedefff]
[    0.000000] On node 0 totalpages: 786036
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3989 pages, LIFO batch:0
[    0.000000]   Normal zone: 2190 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 557793 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00096000-0x00096fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00097000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0xbff00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 19 pages/cpu @f628b000 s47116 r0 d30708 u77824
[    0.000000] pcpu-alloc: s47116 r0 d30708 u77824 alloc=19*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 783806
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-16-generic root=UUID=f8f1315e-709e-4f51-8a99-dd6be856a775 ro nomodeset quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:000bfedf)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 3066772K/3144144K available (7574K kernel code, 738K rwdata, 3020K rodata, 928K init, 796K bss, 77372K reserved, 0K cma-reserved, 2231172K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
                   pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                   vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                     .init : 0xc1b14000 - 0xc1bfc000   ( 928 kB)
                     .data : 0xc1765bf0 - 0xc1b12a40   (3763 kB)
                     .text : 0xc1000000 - 0xc1765bf0   (7574 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] Build-time adjustment of leaf fanout to 32.
[    0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[    0.000000] NR_IRQS:2304 nr_irqs:456 16
[    0.000000] CPU 0 irqstacks, hard=f3836000 soft=f3838000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2133.409 MHz processor
[    0.008019] Calibrating delay loop (skipped), value calculated using timer frequency.. 4266.81 BogoMIPS (lpj=8533636)
[    0.008023] pid_max: default: 32768 minimum: 301
[    0.008030] ACPI: Core revision 20150619
[    0.012674] ACPI: All ACPI Tables successfully acquired
[    0.012694] Security Framework initialized
[    0.012710] AppArmor: AppArmor initialized
[    0.012712] Yama: becoming mindful.
[    0.012759] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.012762] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.013047] Initializing cgroup subsys blkio
[    0.013051] Initializing cgroup subsys memory
[    0.013062] Initializing cgroup subsys devices
[    0.013065] Initializing cgroup subsys freezer
[    0.013069] Initializing cgroup subsys net_cls
[    0.013072] Initializing cgroup subsys perf_event
[    0.013075] Initializing cgroup subsys net_prio
[    0.013079] Initializing cgroup subsys hugetlb
[    0.013102] CPU: Physical Processor ID: 0
[    0.013104] CPU: Processor Core ID: 0
[    0.013110] mce: CPU supports 6 MCE banks
[    0.013117] CPU0: Thermal monitoring enabled (TM2)
[    0.013121] process: using mwait in idle threads
[    0.013129] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.013131] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.013614] Freeing SMP alternatives memory: 28K (c1bfc000 - c1c03000)
[    0.016014] ftrace: allocating 30215 entries in 60 pages
[    0.024101] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.024473] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068000] smpboot: CPU0: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz (fam: 06, model: 0f, stepping: 06)
[    0.068000] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.068000] perf_event_intel: PEBS disabled due to CPU errata
[    0.068000] ... version:                2
[    0.068000] ... bit width:              40
[    0.068000] ... generic registers:      2
[    0.068000] ... value mask:             000000ffffffffff
[    0.068000] ... max period:             000000007fffffff
[    0.068000] ... fixed-purpose events:   3
[    0.068000] ... event mask:             0000000700000003
[    0.068000] CPU 1 irqstacks, hard=f3976000 soft=f3978000
[    0.068000] x86: Booting SMP configuration:
[    0.068000] .... node  #0, CPUs:      #1
[    0.012000] Initializing CPU#1
[    0.068040] x86: Booted up 1 node, 2 CPUs
[    0.068045] smpboot: Total of 2 processors activated (8533.63 BogoMIPS)
[    0.069292] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.069356] devtmpfs: initialized
[    0.069356] evm: security.selinux
[    0.069356] evm: security.SMACK64
[    0.069356] evm: security.SMACK64EXEC
[    0.069356] evm: security.SMACK64TRANSMUTE
[    0.069356] evm: security.SMACK64MMAP
[    0.069356] evm: security.ima
[    0.069356] evm: security.capability
[    0.069356] PM: Registering ACPI NVS region [mem 0xbfee0000-0xbfee2fff] (12288 bytes)
[    0.069356] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.069356] pinctrl core: initialized pinctrl subsystem
[    0.069356] RTC time: 10:01:14, date: 11/15/15
[    0.069356] NET: Registered protocol family 16
[    0.069356] EISA bus registered
[    0.080008] cpuidle: using governor ladder
[    0.092005] cpuidle: using governor menu
[    0.092200] ACPI: bus type PCI registered
[    0.092204] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.092298] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[    0.092302] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
[    0.092305] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[    0.092307] PCI: Using MMCONFIG for extended config space
[    0.092308] PCI: Using configuration type 1 for base access
[    0.104135] ACPI: Added _OSI(Module Device)
[    0.104138] ACPI: Added _OSI(Processor Device)
[    0.104140] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.104142] ACPI: Added _OSI(Processor Aggregator Device)
[    0.109719] ACPI: Dynamic OEM Table Load:
[    0.109728] ACPI: SSDT 0x00000000F3959C00 000087 (v01 HP-CPC Cpu1Ist  00003000 INTL 20040311)
[    0.110094] ACPI: Interpreter enabled
[    0.110113] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[    0.110118] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[    0.110134] ACPI: (supports S0 S3 S4 S5)
[    0.110137] ACPI: Using IOAPIC for interrupt routing
[    0.110177] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.115584] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.115591] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.115597] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.115650] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.115873] PCI host bridge to bus 0000:00
[    0.115877] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.115880] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.115882] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.115885] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.115888] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.115890] pci_bus 0000:00: root bus resource [mem 0xbff00000-0xfebfffff window]
[    0.115901] pci 0000:00:00.0: [8086:29a0] type 00 class 0x060000
[    0.116040] pci 0000:00:01.0: [8086:29a1] type 01 class 0x060400
[    0.116083] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.116209] pci 0000:00:19.0: [8086:104c] type 00 class 0x020000
[    0.116234] pci 0000:00:19.0: reg 0x10: [mem 0xfdfc0000-0xfdfdffff]
[    0.116243] pci 0000:00:19.0: reg 0x14: [mem 0xfdfff000-0xfdffffff]
[    0.116252] pci 0000:00:19.0: reg 0x18: [io  0xff00-0xff1f]
[    0.116297] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.116352] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.116411] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[    0.116453] pci 0000:00:1a.0: reg 0x20: [io  0xfe00-0xfe1f]
[    0.116526] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.116585] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[    0.116626] pci 0000:00:1a.1: reg 0x20: [io  0xfd00-0xfd1f]
[    0.116698] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.116767] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[    0.116790] pci 0000:00:1a.7: reg 0x10: [mem 0xfdffe000-0xfdffe3ff]
[    0.116854] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.116908] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.116973] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.117001] pci 0000:00:1b.0: reg 0x10: [mem 0xfdff4000-0xfdff7fff 64bit]
[    0.117059] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.117116] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.117180] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.117241] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.117297] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.117362] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.117404] pci 0000:00:1d.0: reg 0x20: [io  0xfc00-0xfc1f]
[    0.117475] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.117535] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.117577] pci 0000:00:1d.1: reg 0x20: [io  0xfb00-0xfb1f]
[    0.117648] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.117709] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.117750] pci 0000:00:1d.2: reg 0x20: [io  0xfa00-0xfa1f]
[    0.117822] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.117888] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.117911] pci 0000:00:1d.7: reg 0x10: [mem 0xfdffd000-0xfdffd3ff]
[    0.117976] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.118029] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.118091] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.118185] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.118249] pci 0000:00:1f.0: [8086:2812] type 00 class 0x060100
[    0.118335] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.118340] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.118346] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.118462] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
[    0.118486] pci 0000:00:1f.2: reg 0x10: [io  0xf900-0xf907]
[    0.118494] pci 0000:00:1f.2: reg 0x14: [io  0xf800-0xf803]
[    0.118503] pci 0000:00:1f.2: reg 0x18: [io  0xf700-0xf707]
[    0.118511] pci 0000:00:1f.2: reg 0x1c: [io  0xf600-0xf603]
[    0.118519] pci 0000:00:1f.2: reg 0x20: [io  0xf500-0xf51f]
[    0.118528] pci 0000:00:1f.2: reg 0x24: [mem 0xfdffc000-0xfdffc7ff]
[    0.118555] pci 0000:00:1f.2: PME# supported from D3hot
[    0.118672] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.118687] pci 0000:00:1f.3: reg 0x10: [mem 0xfdffb000-0xfdffb0ff]
[    0.118714] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
[    0.118877] pci 0000:01:00.0: [10de:01dd] type 00 class 0x030000
[    0.118898] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[    0.118909] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.118919] pci 0000:01:00.0: reg 0x1c: [mem 0xfb000000-0xfbffffff 64bit]
[    0.118932] pci 0000:01:00.0: reg 0x30: [mem 0xfcfe0000-0xfcffffff pref]
[    0.119005] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.119013] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.119017] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfcffffff]
[    0.119022] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.119079] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.119138] pci 0000:03:01.0: [11c1:5811] type 00 class 0x0c0010
[    0.119161] pci 0000:03:01.0: reg 0x10: [mem 0xfdeff000-0xfdefffff]
[    0.119230] pci 0000:03:01.0: supports D1 D2
[    0.119232] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot
[    0.119305] pci 0000:03:04.0: [14f1:2f20] type 00 class 0x078000
[    0.119328] pci 0000:03:04.0: reg 0x10: [mem 0xfdee0000-0xfdeeffff]
[    0.119338] pci 0000:03:04.0: reg 0x14: [io  0xdf00-0xdf07]
[    0.119396] pci 0000:03:04.0: PME# supported from D3hot D3cold
[    0.119488] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.119493] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.119497] pci 0000:00:1e.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.119504] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.119506] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.119509] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.119512] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.119515] pci 0000:00:1e.0:   bridge window [mem 0xbff00000-0xfebfffff window] (subtractive decode)
[    0.119531] pci_bus 0000:00: on NUMA node 0
[    0.119980] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.120059] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.120130] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.120201] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.120271] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.120341] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.120412] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[    0.120481] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.120603] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.120736] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.120736] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.120736] vgaarb: loaded
[    0.120736] vgaarb: bridge control possible 0000:01:00.0
[    0.120736] SCSI subsystem initialized
[    0.120736] libata version 3.00 loaded.
[    0.120736] ACPI: bus type USB registered
[    0.120736] usbcore: registered new interface driver usbfs
[    0.120736] usbcore: registered new interface driver hub
[    0.120736] usbcore: registered new device driver usb
[    0.120736] PCI: Using ACPI for IRQ routing
[    0.121412] PCI: pci_cache_line_size set to 64 bytes
[    0.121461] e820: reserve RAM buffer [mem 0x00096c00-0x0009ffff]
[    0.121464] e820: reserve RAM buffer [mem 0xbfedf800-0xbfffffff]
[    0.121637] NetLabel: Initializing
[    0.121639] NetLabel:  domain hash size = 128
[    0.121641] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.121654] NetLabel:  unlabeled traffic allowed by default
[    0.121687] clocksource: Switched to clocksource refined-jiffies
[    0.133409] AppArmor: AppArmor Filesystem Enabled
[    0.133527] pnp: PnP ACPI init
[    0.133769] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.133776] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.133779] system 00:00: [io  0x0294-0x0297] has been reserved
[    0.133782] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.133788] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.133844] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.134003] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.134077] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.134160] system 00:04: [io  0x0400-0x04bf] could not be reserved
[    0.134164] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.134422] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.134427] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.134669] system 00:06: [mem 0x000d4a00-0x000d7fff] has been reserved
[    0.134673] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.134676] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.134679] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.134683] system 00:06: [mem 0xbfef0000-0xbffeffff] could not be reserved
[    0.134686] system 00:06: [mem 0xbfee0000-0xbfefffff] could not be reserved
[    0.134689] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.134692] system 00:06: [mem 0x00100000-0xbfedffff] could not be reserved
[    0.134695] system 00:06: [mem 0xfdffa000-0xfdffafff] has been reserved
[    0.134698] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.134701] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.134704] system 00:06: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.134707] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
[    0.134710] system 00:06: [mem 0x000e0000-0x000effff] has been reserved
[    0.134714] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.134723] pnp: PnP ACPI: found 7 devices
[    0.134729] PnPBIOS: Disabled by ACPI PNP
[    0.171980] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.172004] clocksource: Switched to clocksource acpi_pm
[    0.172044] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.172049] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.172053] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.172066] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.172069] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.172073] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.172076] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.172079] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.172082] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.172090] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbff00000-0xc00fffff]
[    0.172098] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0100000-0xc02fffff 64bit pref]
[    0.172102] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.172105] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.172110] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfcffffff]
[    0.172113] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.172118] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.172122] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.172127] pci 0000:00:1c.0:   bridge window [mem 0xbff00000-0xc00fffff]
[    0.172131] pci 0000:00:1c.0:   bridge window [mem 0xc0100000-0xc02fffff 64bit pref]
[    0.172137] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.172140] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.172146] pci 0000:00:1e.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.172154] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.172157] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.172160] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.172162] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.172165] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff window]
[    0.172168] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
[    0.172170] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.172173] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.172176] pci_bus 0000:02: resource 1 [mem 0xbff00000-0xc00fffff]
[    0.172178] pci_bus 0000:02: resource 2 [mem 0xc0100000-0xc02fffff 64bit pref]
[    0.172181] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.172183] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.172186] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.172189] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.172191] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.172194] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.172197] pci_bus 0000:03: resource 8 [mem 0xbff00000-0xfebfffff window]
[    0.172237] NET: Registered protocol family 2
[    0.172472] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.172493] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.172528] TCP: Hash tables configured (established 8192 bind 8192)
[    0.172566] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.172577] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.172634] NET: Registered protocol family 1
[    0.173816] pci 0000:01:00.0: Video device with shadowed ROM
[    0.173823] PCI: CLS 32 bytes, default 64
[    0.173887] Trying to unpack rootfs image as initramfs...
[    0.856706] Freeing initrd memory: 32144K (f4128000 - f608c000)
[    0.857017] microcode: CPU0 sig=0x6f6, pf=0x1, revision=0x44
[    0.857025] microcode: CPU1 sig=0x6f6, pf=0x1, revision=0x44
[    0.857122] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.857261] Scanning for low memory corruption every 60 seconds
[    0.857728] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.857778] Initialise system trusted keyring
[    0.857811] audit: initializing netlink subsys (disabled)
[    0.857836] audit: type=2000 audit(1447581674.855:1): initialized
[    0.858246] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.861076] zpool: loaded
[    0.861078] zbud: loaded
[    0.861172] VFS: Disk quotas dquot_6.6.0
[    0.861234] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.861969] fuse init (API version 7.23)
[    0.862202] Key type big_key registered
[    0.862627] Key type asymmetric registered
[    0.862631] Asymmetric key parser 'x509' registered
[    0.862651] bounce: pool size: 64 pages
[    0.862706] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.862750] io scheduler noop registered
[    0.862754] io scheduler deadline registered (default)
[    0.862804] io scheduler cfq registered
[    0.863141] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.863331] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.863343] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.863393] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.863395] vesafb: scrolling: redraw
[    0.863397] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.863417] vesafb: framebuffer at 0xe0000000, mapped to 0xf8600000, using 3072k, total 3072k
[    0.863553] Console: switching to colour frame buffer device 128x48
[    0.863579] fb0: VESA VGA frame buffer device
[    0.863603] intel_idle: does not run on family 6 model 15
[    0.863699] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.863705] ACPI: Power Button [PWRB]
[    0.863779] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.863782] ACPI: Power Button [PWRF]
[    0.864412] thermal LNXTHERM:00: registered as thermal_zone0
[    0.864415] ACPI: Thermal Zone [THRM] (-269 C)
[    0.864459] GHES: HEST is not enabled!
[    0.864494] isapnp: Scanning for PnP cards...
[    0.872046] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.874312] Linux agpgart interface v0.103
[    0.877795] brd: module loaded
[    0.879254] loop: module loaded
[    0.879586] libphy: Fixed MDIO Bus: probed
[    0.879590] tun: Universal TUN/TAP device driver, 1.6
[    0.879592] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.879649] PPP generic driver version 2.4.2
[    0.879746] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.879757] ehci-pci: EHCI PCI platform driver
[    0.879917] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.879925] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.883837] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    0.883860] ehci-pci 0000:00:1a.7: irq 23, io mem 0xfdffe000
[    0.892023] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.892093] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.892096] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.892099] usb usb1: Product: EHCI Host Controller
[    0.892101] usb usb1: Manufacturer: Linux 4.2.0-16-generic ehci_hcd
[    0.892103] usb usb1: SerialNumber: 0000:00:1a.7
[    0.892260] hub 1-0:1.0: USB hub found
[    0.892269] hub 1-0:1.0: 4 ports detected
[    0.892547] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.892556] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.896470] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.896480] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdffd000
[    0.908022] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.908064] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.908067] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.908070] usb usb2: Product: EHCI Host Controller
[    0.908072] usb usb2: Manufacturer: Linux 4.2.0-16-generic ehci_hcd
[    0.908075] usb usb2: SerialNumber: 0000:00:1d.7
[    0.908217] hub 2-0:1.0: USB hub found
[    0.908226] hub 2-0:1.0: 6 ports detected
[    0.908442] ehci-platform: EHCI generic platform driver
[    0.908456] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.908462] ohci-pci: OHCI PCI platform driver
[    0.908481] ohci-platform: OHCI generic platform driver
[    0.908494] uhci_hcd: USB Universal Host Controller Interface driver
[    0.908596] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.908604] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.908610] uhci_hcd 0000:00:1a.0: detected 2 ports
[    0.908629] uhci_hcd 0000:00:1a.0: irq 23, io base 0x0000fe00
[    0.908681] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.908684] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.908687] usb usb3: Product: UHCI Host Controller
[    0.908689] usb usb3: Manufacturer: Linux 4.2.0-16-generic uhci_hcd
[    0.908691] usb usb3: SerialNumber: 0000:00:1a.0
[    0.908838] hub 3-0:1.0: USB hub found
[    0.908847] hub 3-0:1.0: 2 ports detected
[    0.909069] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.909078] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.909085] uhci_hcd 0000:00:1a.1: detected 2 ports
[    0.909110] uhci_hcd 0000:00:1a.1: irq 19, io base 0x0000fd00
[    0.909162] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.909165] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.909168] usb usb4: Product: UHCI Host Controller
[    0.909170] usb usb4: Manufacturer: Linux 4.2.0-16-generic uhci_hcd
[    0.909173] usb usb4: SerialNumber: 0000:00:1a.1
[    0.909318] hub 4-0:1.0: USB hub found
[    0.909327] hub 4-0:1.0: 2 ports detected
[    0.909544] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.909552] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.909558] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.909578] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[    0.909630] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.909633] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.909635] usb usb5: Product: UHCI Host Controller
[    0.909638] usb usb5: Manufacturer: Linux 4.2.0-16-generic uhci_hcd
[    0.909640] usb usb5: SerialNumber: 0000:00:1d.0
[    0.909789] hub 5-0:1.0: USB hub found
[    0.909798] hub 5-0:1.0: 2 ports detected
[    0.910013] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.910020] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.910027] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.910044] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[    0.910097] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.910100] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.910102] usb usb6: Product: UHCI Host Controller
[    0.910104] usb usb6: Manufacturer: Linux 4.2.0-16-generic uhci_hcd
[    0.910107] usb usb6: SerialNumber: 0000:00:1d.1
[    0.910248] hub 6-0:1.0: USB hub found
[    0.910257] hub 6-0:1.0: 2 ports detected
[    0.910475] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.910485] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.910493] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.910517] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[    0.910569] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.910572] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.910574] usb usb7: Product: UHCI Host Controller
[    0.910577] usb usb7: Manufacturer: Linux 4.2.0-16-generic uhci_hcd
[    0.910579] usb usb7: SerialNumber: 0000:00:1d.2
[    0.910724] hub 7-0:1.0: USB hub found
[    0.910732] hub 7-0:1.0: 2 ports detected
[    0.910933] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.913372] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.913378] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.913564] mousedev: PS/2 mouse device common for all mice
[    0.913737] rtc_cmos 00:01: RTC can wake from S4
[    0.913863] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.913885] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram
[    0.913899] i2c /dev entries driver
[    0.913982] device-mapper: uevent: version 1.0.3
[    0.914080] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[    0.914114] platform eisa.0: Probing EISA bus 0
[    0.914118] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.914120] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.914123] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.914126] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.914128] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.914131] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.914133] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.914135] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.914138] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.914140] platform eisa.0: EISA: Detected 0 cards
[    0.914161] cpufreq-nforce2: No nForce2 chipset.
[    0.914173] ledtrig-cpu: registered to indicate activity on CPUs
[    0.914187] PCCT header not found.
[    0.914525] NET: Registered protocol family 10
[    0.914856] NET: Registered protocol family 17
[    0.914871] Key type dns_resolver registered
[    0.915148] Using IPI No-Shortcut mode
[    0.915328] Loading compiled-in X.509 certificates
[    0.919285] Loaded X.509 cert 'Build time autogenerated kernel key: 9a18469980b5ebdd28885474f95f179ffebbdfd7'
[    0.919305] registered taskstats version 1
[    0.919326] zswap: loading zswap
[    0.919329] zswap: using zbud pool
[    0.919334] zswap: using lzo compressor
[    0.921993] Key type trusted registered
[    0.926480] Key type encrypted registered
[    0.926488] AppArmor: AppArmor sha1 policy hashing enabled
[    0.926493] ima: No TPM chip found, activating TPM-bypass!
[    0.926521] evm: HMAC attrs: 0x1
[    0.926802]   Magic number: 7:179:22
[    0.926900] rtc_cmos 00:01: setting system clock to 2015-11-15 10:01:15 UTC (1447581675)
[    0.927161] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.927163] EDD information not available.
[    0.927243] PM: Hibernation image not present or could not be loaded.
[    0.941189] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.173974] isapnp: No Plug & Play device found
[    1.174286] Freeing unused kernel memory: 928K (c1b14000 - c1bfc000)
[    1.174357] Write protecting the kernel text: 7576k
[    1.174395] Write protecting the kernel read-only data: 3024k
[    1.174397] NX-protecting the kernel data: 4712k
[    1.189527] random: systemd-udevd urandom read with 0 bits of entropy available
[    1.204039] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.258905] [drm] Initialized drm 1.1.0 20060810
[    1.259310] pps_core: LinuxPPS API ver. 1 registered
[    1.259313] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.290311] wmi: Mapper loaded
[    1.312590] ahci 0000:00:1f.2: version 3.0
[    1.312722] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
[    1.312824] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[    1.312828] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ccc ems
[    1.317207] PTP clock support registered
[    1.349518] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
[    1.349523] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.354035] usb 1-1: New USB device found, idVendor=058f, idProduct=6362
[    1.354041] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.354044] usb 1-1: Product: Mass Storage Device
[    1.354046] usb 1-1: Manufacturer: Generic
[    1.354048] usb 1-1: SerialNumber: 058F312D81B1
[    1.357016] scsi host0: ahci
[    1.357160] scsi host1: ahci
[    1.357294] scsi host2: ahci
[    1.357548] scsi host3: ahci
[    1.357688] scsi host4: ahci
[    1.357825] scsi host5: ahci
[    1.357913] ata1: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc100 irq 26
[    1.357916] ata2: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc180 irq 26
[    1.357919] ata3: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc200 irq 26
[    1.357922] ata4: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc280 irq 26
[    1.357924] ata5: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc300 irq 26
[    1.357927] ata6: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc380 irq 26
[    1.358148] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.387148] usb-storage 1-1:1.0: USB Mass Storage device detected
[    1.387418] scsi host6: usb-storage 1-1:1.0
[    1.387541] usbcore: registered new interface driver usb-storage
[    1.392514] usbcore: registered new interface driver uas
[    1.400105] firewire_ohci 0000:03:01.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[    1.534139] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:18:f3:6e:a3:6a
[    1.534143] e1000e 0000:00:19.0 eth0: Intel(R) PRO/10/100 Network Connection
[    1.534168] e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 7, PBA No: FFFFFF-0FF
[    1.534999] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.676058] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.676080] ata3: SATA link down (SStatus 0 SControl 300)
[    1.676107] ata4: SATA link down (SStatus 0 SControl 300)
[    1.676130] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.676984] ata1.00: ATA-8: WDC WD5000AZRX-00A8LB0, 01.01A01, max UDMA/133
[    1.676998] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.678310] ata1.00: configured for UDMA/133
[    1.678460] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AZRX-0 1A01 PQ: 0 ANSI: 5
[    1.678794] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.678798] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.678873] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.678885] sd 0:0:0:0: [sda] Write Protect is off
[    1.678889] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.678920] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.678963] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-H653L, 0314, max UDMA/33
[    1.678966] ata2.00: applying bridge limits
[    1.680118] ata6: SATA link down (SStatus 0 SControl 300)
[    1.680138] ata5: SATA link down (SStatus 0 SControl 300)
[    1.682104] ata2.00: configured for UDMA/33
[    1.684026] scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-H653L 0314 PQ: 0 ANSI: 5
[    1.704788] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.704792] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.704998] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.705088] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.725771]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    1.726346] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.856069] tsc: Refined TSC clocksource calibration: 2133.408 MHz
[    1.856077] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1ec077e4ba6, max_idle_ns: 440795309929 ns
[    1.900205] firewire_core 0000:03:01.0: created device fw0: GUID 0011d80000e3f6d3, S400
[    2.384816] scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    2.385438] scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    2.386062] scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    2.386686] scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    2.387002] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    2.387246] sd 6:0:0:1: Attached scsi generic sg3 type 0
[    2.387487] sd 6:0:0:2: Attached scsi generic sg4 type 0
[    2.387885] sd 6:0:0:3: Attached scsi generic sg5 type 0
[    2.392422] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    2.404917] sd 6:0:0:3: [sde] Attached SCSI removable disk
[    2.405543] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[    2.414295] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[    2.628503] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    2.856144] clocksource: Switched to clocksource tsc
[    4.292071] floppy0: no floppy controllers found
[    4.479622] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    4.946820] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    5.066347] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[    5.110978] random: nonblocking pool is initialized
[    5.153092] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    5.153254] systemd[1]: Detected architecture x86.
[    5.156740] systemd[1]: Set hostname to <soze-RP867AA-AB8-m7645-tr>.
[    5.229391] systemd[1]: Initializing machine ID from random generator.
[    5.229454] systemd[1]: Installed transient /etc/machine-id file.
[    5.230144] systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
[    6.121366] systemd[1]: Reached target User and Group Name Lookups.
[    6.121471] systemd[1]: Created slice Root Slice.
[    6.121541] systemd[1]: Listening on Journal Socket.
[    6.121669] systemd[1]: Created slice User and Session Slice.
[    6.121712] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.121760] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.121863] systemd[1]: Created slice System Slice.
[    6.122694] systemd[1]: Started Read required files in advance.
[    6.124342] systemd[1]: Starting Uncomplicated firewall...
[    6.126507] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.127370] systemd[1]: Mounting Debug File System...
[    6.178666] systemd[1]: Starting Load Kernel Modules...
[    6.178823] systemd[1]: Created slice system-getty.slice.
[    6.179876] systemd[1]: Mounting Huge Pages File System...
[    6.180898] systemd[1]: Starting Setup Virtual Console...
[    6.181715] systemd[1]: Mounting POSIX Message Queue File System...
[    6.182758] systemd[1]: Started Braille Device Support.
[    6.184172] systemd[1]: Starting Increase datagram queue length...
[    6.184248] systemd[1]: Listening on udev Kernel Socket.
[    6.184404] systemd[1]: Listening on Journal Audit Socket.
[    6.184437] systemd[1]: Reached target Encrypted Volumes.
[    6.184704] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.241904] systemd[1]: Listening on udev Control Socket.
[    6.242769] systemd[1]: Starting udev Coldplug all Devices...
[    6.242809] systemd[1]: Reached target Slices.
[    6.242868] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.242897] systemd[1]: Reached target Remote File Systems (Pre).
[    6.242996] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.245148] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.245483] systemd[1]: Started Setup Virtual Console.
[    6.246471] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.301875] systemd[1]: Started Uncomplicated firewall.
[    6.414324] systemd[1]: Started udev Coldplug all Devices.
[    6.536161] systemd[1]: Mounted POSIX Message Queue File System.
[    6.536210] systemd[1]: Mounted Huge Pages File System.
[    6.536236] systemd[1]: Mounted Debug File System.
[    6.536872] systemd[1]: Started Increase datagram queue length.
[    6.547200] systemd[1]: Listening on Syslog Socket.
[    6.548103] systemd[1]: Starting Journal Service...
[    6.553738] lp: driver loaded but no devices found
[    6.578400] ppdev: user-space parallel port driver
[    6.653386] systemd[1]: Started Load Kernel Modules.
[    6.654417] systemd[1]: Starting Apply Kernel Variables...
[    6.655617] systemd[1]: Mounting FUSE Control File System...
[    6.660506] systemd[1]: Mounted FUSE Control File System.
[    6.692761] systemd[1]: Started Create Static Device Nodes in /dev.
[    6.693788] systemd[1]: Starting udev Kernel Device Manager...
[    6.883696] systemd[1]: Started Apply Kernel Variables.
[    6.908117] systemd[1]: Started Journal Service.
[    7.118756] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[    7.288581] systemd-journald[221]: Received request to flush runtime journal from PID 1
[    7.645776] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.725560] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000429-0x0000000000000429 (\PM2S) (20150619/utaddress-254)
[    7.725569] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000428-0x0000000000000428 (\PM1K) (20150619/utaddress-254)
[    7.725575] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.725579] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x00000000000004B8-0x00000000000004BB (\GPO2) (20150619/utaddress-254)
[    7.725584] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.725586] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x00000000000004AC-0x00000000000004AF (\GPIV) (20150619/utaddress-254)
[    7.725591] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x000000000000048C-0x000000000000048F (\GPO_) (20150619/utaddress-254)
[    7.725595] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000490-0x0000000000000490 (\PALD) (20150619/utaddress-254)
[    7.725600] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.725602] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.042207] coretemp coretemp.0: Using relative temperature scale!
[    8.042225] coretemp coretemp.0: Using relative temperature scale!
[    8.545676] snd_hda_codec_realtek hdaudioC0D0: ALC889A: SKU not ready 0x411111f0
[    8.546632] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889A: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    8.546636] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.546639] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    8.546642] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    8.546645] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    8.546647] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    8.546650] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    8.546653] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    8.546656] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    8.546658] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1c
[    8.546661] snd_hda_codec_realtek hdaudioC0D0:    dig-in=0x1f
[    8.562947] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[    8.563056] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    8.563156] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    9.067004] Adding 3141628k swap on /dev/sda5.  Priority:-1 extents:1 across:3141628k FS
[    9.324833] audit: type=1400 audit(1447574483.895:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=408 comm="apparmor_parser"
[    9.324846] audit: type=1400 audit(1447574483.895:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=408 comm="apparmor_parser"
[    9.523539] audit: type=1400 audit(1447574484.091:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=408 comm="apparmor_parser"
[    9.523554] audit: type=1400 audit(1447574484.091:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=408 comm="apparmor_parser"
[    9.523561] audit: type=1400 audit(1447574484.091:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=408 comm="apparmor_parser"
[    9.523569] audit: type=1400 audit(1447574484.091:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=408 comm="apparmor_parser"
[   10.083585] audit: type=1400 audit(1447574484.651:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=408 comm="apparmor_parser"
[   10.083606] audit: type=1400 audit(1447574484.651:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=408 comm="apparmor_parser"
[   10.083614] audit: type=1400 audit(1447574484.651:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=408 comm="apparmor_parser"
[   10.083622] audit: type=1400 audit(1447574484.651:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=408 comm="apparmor_parser"
[   10.660109] floppy0: no floppy controllers found
[   13.567051] cgroup: new mount options do not match the existing superblock, will be ignored
[   14.416791] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   14.620363] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   16.068773] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[   16.068782] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[   16.068815] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[  219.026949] perf interrupt took too long (2515 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 9483.769514] perf interrupt took too long (5002 > 5000), lowering kernel.perf_event_max_sample_rate to 25000


« Son Düzenleme: 15 Kasım 2015 - 15:28:38 Gönderen: ibrahimsoze »

« Yanıtla #11 : »
 tty giriş bu şekilde ctrl+alt+f1 > kullanıcı adı + şifre > ama yeni kurulum yapmışsınız sorun devam ediyor mu ?

« Yanıtla #12 : »
@eral sorun devam  ediyor  ama ubuntuyu kullanabiliyorum(düşük çözünürlükte) @if arkadaşımızın  dediği gibi yapıp nomodeset seçeneği ile  kurdum. Ama düşük çözünürlükte  şuanda. Bir de birtakım şeyler  yapmamı  istedi üsteki mesajlarda görebilirsin.

Bakalım başarabilecek miyiz!

« Yanıtla #13 : »
ctrl+alt+f1 > kullanıcı adı + şifre  buraya girmeniz gayet kolay önce ctrl ye basın ardından alt sanırım yakınlar 2 sine basılı tutarken de f1 yapın zaten kendi açılır .kolay gelsin

« Yanıtla #14 : »
@eral yanlış  anladın devam eden sorun tty  ye  girme  değil ekran problemi. Oraya girip @if   in  dediği gibi istediklerini verdim zaten.

« Yanıtla #15 : »
çıktıları paylaştınız ise çözüm için arkadaşların sisteme girmelerini beklemelisiniz. Onlar size yanıt vereceklerdir çözüm önerileri olacaktır kolay gelsin

« Yanıtla #16 : »
Kod: [Seç]
glxinfo | grep renderçıktısına bir bakabilir miyiz?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.

« Yanıtla #17 : »
Biraz geç oldu. Kusura  bakmayın.

Kod: [Seç]
soze@soze-RP867AA-AB8-m7645-tr:~$ glxinfo | grep render
direct rendering: Yes
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
    GLX_MESA_query_renderer, GLX_OML_swap_method, GLX_SGIS_multisample,
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.6, 128 bits)
    GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
    GL_NV_blend_square, GL_NV_conditional_render, GL_NV_depth_clamp,

« Yanıtla #18 : »
Yazılım ve Güncelleştirme uygulamasını aç, Ek Sürücüler sekmesinden Nvidia sürücüsünü kurup sistemi yeniden başlat bakalım. Eğer sorun devam ederse nomodeset parametresini kaldırıp denersin. Sürücüler kurulu olduktan sonra nomodeset'e gerek olmayacaktır.
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.

« Yanıtla #19 : »

@heartsmagic  Daha önce resimde görülen sürümü yükledim. Masaüstü geldi  ama çok ağır  çalışıyor  ve görüntü çizik çizikti. Resimde görülen farklı seçeneklerden birini yükleyeyim mi?
Teşekkürler...


« Yanıtla #20 : »
Kartına son sürücü desteği 304 numaralı sürümde:
http://www.geforce.com/drivers/results/95154

Onun sıkıntı çıkartmaması lazım esasında, sen tekrar bir kur sistemi yeniden başlat. Sonrasında:
Kod: [Seç]
glxinfo | grep renderçıktısını buraya geç. Ekran görüntüsüne gerek yok ama, daha önce yaptığın gibi kod etiketi içinde geçersin. Ekran yine çizik çizik falan gelirse duruma bakmaya çalışırız.
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.