[Çözüldü] xen libxl.c:109:libxl_ctx_alloc

[ata1]

xen kurulumu yaptım ama henüz çalıştırmayı başaramadım    resimlerde görüleceği üzere bağlantı kurulamadı diyor

Kod Seç Genişlet

╔═[23:59]═[ata@ata]
╚═══===═══[]>> uname -r
4.1.12-1-MANJARO


Kod Seç Genişlet

╔═[00:08]═[ata@ata]
╚═══===═══[]>> uname -a
Linux ata 4.1.12-1-MANJARO #1 SMP PREEMPT Tue Oct 27 22:11:47 UTC 2015 x86_64 GNU/Linux


Kod Seç Genişlet

═[23:50]═[ata@ata]
╚═══===═══[]>> sudo xl vm-list
xc: error: Could not obtain handle on privileged command interface (2 = No such file or directory): Internal error
libxl: error: libxl.c:109:libxl_ctx_alloc: cannot open libxc handle: No such file or directory
cannot init xl context


Kod Seç Genişlet

╔═[23:51]═[ata@ata]
╚═══===═══[]>> systemctl status systemd-modules-load.service -l
● systemd-modules-load.service - Load Kernel Modules
   Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static; vendor preset: disabled)
   Active: failed (Result: exit-code) since Pzt 2015-11-09 22:18:09 EET; 1h 36min ago
     Docs: man:systemd-modules-load.service(8)
           man:modules-load.d(5)
Main PID: 158 (code=exited, status=1/FAILURE)

Kas 09 22:17:58 ata systemd-modules-load[158]: Failed to insert 'xen_pciback': No such device
Kas 09 22:17:58 ata systemd-modules-load[158]: Failed to find module 'evtchn'
Kas 09 22:17:58 ata systemd-modules-load[158]: Failed to find module 'gntdev'
Kas 09 22:17:58 ata systemd-modules-load[158]: Failed to find module 'netbk'
Kas 09 22:18:07 ata systemd-modules-load[158]: Failed to find module 'blkbk'
Kas 09 22:18:09 ata systemd-modules-load[158]: Failed to find module 'xen-scsibk'
Kas 09 22:18:09 ata systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
Kas 09 22:18:09 ata systemd[1]: Failed to start Load Kernel Modules.
Kas 09 22:18:09 ata systemd[1]: systemd-modules-load.service: Unit entered failed state.
Kas 09 22:18:09 ata systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.


Kod Seç Genişlet

═[23:56]═[ata@ata]
╚═══===═══[]>> systemctl status systemd-modules-load.service
● systemd-modules-load.service - Load Kernel Modules
   Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static; vendor preset: disabled)
   Active: failed (Result: exit-code) since Pzt 2015-11-09 22:18:09 EET; 1h 39min ago
     Docs: man:systemd-modules-load.service(8)
           man:modules-load.d(5)
Main PID: 158 (code=exited, status=1/FAILURE)

Kas 09 22:17:58 ata systemd-modules-load[158]: Failed to insert 'xen_pciback...e
Kas 09 22:17:58 ata systemd-modules-load[158]: Failed to find module 'evtchn'
Kas 09 22:17:58 ata systemd-modules-load[158]: Failed to find module 'gntdev'
Kas 09 22:17:58 ata systemd-modules-load[158]: Failed to find module 'netbk'
Kas 09 22:18:07 ata systemd-modules-load[158]: Failed to find module 'blkbk'
Kas 09 22:18:09 ata systemd-modules-load[158]: Failed to find module 'xen-sc...'
Kas 09 22:18:09 ata systemd[1]: systemd-modules-load.service: Main process ...RE
Kas 09 22:18:09 ata systemd[1]: Failed to start Load Kernel Modules.
Kas 09 22:18:09 ata systemd[1]: systemd-modules-load.service: Unit entered ...e.
Kas 09 22:18:09 ata systemd[1]: systemd-modules-load.service: Failed with r...'.
Hint: Some lines were ellipsized, use -l to show in full.



Kod Seç Genişlet

╔═[02:48]═[ata@ata]
╚═══===═══[]>>  dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.12-1-MANJARO (builduser@manjaro) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Tue Oct 27 22:11:47 UTC 2015
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.1-x86_64 root=UUID=414e67c6-e563-47d7-8189-1d98e60c43a7 rw quiet splash
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfca7fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfca8000-0x00000000bfcbefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bfcbf000-0x00000000bfd80fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfd81000-0x00000000bfdbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfdbf000-0x00000000bfddefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfddf000-0x00000000bfdf6fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bfdf7000-0x00000000bfdfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion dv6 Notebook PC/3628, BIOS F.44 04/06/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC 
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[    0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[    0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbfa00000-0xbfbfffff]
[    0.000000]  [mem 0xbfa00000-0xbfbfffff] page 2M
[    0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xa0000000-0xbf9fffff]
[    0.000000]  [mem 0xa0000000-0xbf9fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x80000000-0x9fffffff]
[    0.000000]  [mem 0x80000000-0x9fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x7fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0xbfc00000-0xbfca7fff]
[    0.000000]  [mem 0xbfc00000-0xbfca7fff] page 4k
[    0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbfcbf000-0xbfd80fff]
[    0.000000]  [mem 0xbfcbf000-0xbfd80fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbfdbf000-0xbfddefff]
[    0.000000]  [mem 0xbfdbf000-0xbfddefff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbfdf7000-0xbfdfffff]
[    0.000000]  [mem 0xbfdf7000-0xbfdfffff] page 4k
[    0.000000] RAMDISK: [mem 0x37598000-0x37ac3fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x00000000BFDF6120 00006C (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000BFDF4000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 0x00000000BFDE2000 00DC01 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: FACS 0x00000000BFD8D000 000040
[    0.000000] ACPI: FACS 0x00000000BFD8D000 000040
[    0.000000] ACPI: DMAR 0x00000000BFDF5000 000040 (v01        ?        00000001      00000000)
[    0.000000] ACPI: HPET 0x00000000BFDF3000 000038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 0x00000000BFDF2000 00006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 0x00000000BFDF1000 00003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: ASF! 0x00000000BFDF0000 0000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 0x00000000BFDE1000 000176 (v01 HPQOEM SLIC-MPC 06040000  LTP 00000001)
[    0.000000] ACPI: BOOT 0x00000000BFDE0000 000028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 0x00000000BFDDF000 000655 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bfdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0xbfdfc000-0xbfdfffff]
[    0.000000]  [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bc200000-ffff8800bf1fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000bfdfffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bfca7fff]
[    0.000000]   node   0: [mem 0x00000000bfcbf000-0x00000000bfd80fff]
[    0.000000]   node   0: [mem 0x00000000bfdbf000-0x00000000bfddefff]
[    0.000000]   node   0: [mem 0x00000000bfdf7000-0x00000000bfdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bfdfffff]
[    0.000000] On node 0 totalpages: 785712
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12216 pages used for memmap
[    0.000000]   DMA32 zone: 781715 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfca8000-0xbfcbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfd81000-0xbfdbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfddf000-0xbfdf6fff]
[    0.000000] e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff8800bf800000 s95576 r8192 d31400 u524288
[    0.000000] pcpu-alloc: s95576 r8192 d31400 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 773411
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.1-x86_64 root=UUID=414e67c6-e563-47d7-8189-1d98e60c43a7 rw quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at drivers/iommu/dmar.c:829 warn_invalid_dmar+0x7c/0x90()
[    0.000000] Your BIOS is broken; DMAR reported at address 0!
               BIOS vendor: Hewlett-Packard; Ver: F.44; Product Version: Rev 1
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.1.12-1-MANJARO #1
[    0.000000] Hardware name: Hewlett-Packard HP Pavilion dv6 Notebook PC/3628, BIOS F.44 04/06/2011
[    0.000000]  0000000000000000 6de007e27ee7565a ffffffff81803cf8 ffffffff815971ce
[    0.000000]  0000000000000000 ffffffff81803d50 ffffffff81803d38 ffffffff81078d0a
[    0.000000]  ffffffff81803d68 0000000000000000 ffffffff81720bcc ffffffff81b31010
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff815971ce>] dump_stack+0x4c/0x6e
[    0.000000]  [<ffffffff81078d0a>] warn_slowpath_common+0x8a/0xc0
[    0.000000]  [<ffffffff81078dfe>] warn_slowpath_fmt_taint+0x4e/0x70
[    0.000000]  [<ffffffff8190e7b1>] ? __acpi_map_table+0x13/0x18
[    0.000000]  [<ffffffff81590f17>] ? acpi_os_map_iomem+0x27/0x14e
[    0.000000]  [<ffffffff813e910c>] warn_invalid_dmar+0x7c/0x90
[    0.000000]  [<ffffffff8159104c>] ? acpi_os_map_memory+0xe/0x10
[    0.000000]  [<ffffffff8159194c>] dmar_validate_one_drhd+0xcc/0xf0
[    0.000000]  [<ffffffff813e92ba>] dmar_walk_remapping_entries+0x8a/0x1b0
[    0.000000]  [<ffffffff819423fd>] detect_intel_iommu+0x61/0xf2
[    0.000000]  [<ffffffff81591880>] ? xen_swiotlb_init+0x4d0/0x4d0
[    0.000000]  [<ffffffff81906dda>] pci_iommu_alloc+0x51/0x6e
[    0.000000]  [<ffffffff8191852a>] mem_init+0x17/0x9d
[    0.000000]  [<ffffffff818fbde8>] start_kernel+0x255/0x4af
[    0.000000]  [<ffffffff818fb120>] ? early_idt_handler_array+0x120/0x120
[    0.000000]  [<ffffffff818fb339>] x86_64_start_reservations+0x2a/0x2c
[    0.000000]  [<ffffffff818fb485>] x86_64_start_kernel+0x14a/0x16d
[    0.000000] ---[ end trace 3e2f425686e2c32b ]---
[    0.000000] Memory: 3076028K/3142848K available (5766K kernel code, 902K rwdata, 1748K rodata, 1184K init, 1152K bss, 66820K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:8448 nr_irqs:456 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2194.500 MHz processor
[    0.003346] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.87 BogoMIPS (lpj=7315000)
[    0.003350] pid_max: default: 32768 minimum: 301
[    0.003358] ACPI: Core revision 20150410
[    0.017799] ACPI: All ACPI Tables successfully acquired
[    0.017828] Security Framework initialized
[    0.017838] Yama: becoming mindful.
[    0.018212] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.020743] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.022064] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.022073] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.022469] Initializing cgroup subsys blkio
[    0.022476] Initializing cgroup subsys memory
[    0.022488] Initializing cgroup subsys devices
[    0.022492] Initializing cgroup subsys freezer
[    0.022496] Initializing cgroup subsys net_cls
[    0.022500] Initializing cgroup subsys bfqio
[    0.022528] CPU: Physical Processor ID: 0
[    0.022529] CPU: Processor Core ID: 0
[    0.022532] mce: CPU supports 6 MCE banks
[    0.022540] CPU0: Thermal monitoring enabled (TM2)
[    0.022545] process: using mwait in idle threads
[    0.022551] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.022552] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.022943] Freeing SMP alternatives memory: 20K (ffffffff81a0b000 - ffffffff81a10000)
[    0.026672] ftrace: allocating 21770 entries in 86 pages
[    0.036792] dmar: Host address width 36
[    0.036796] dmar: DRHD base: 0x00000000000000 flags: 0x1
[    0.036799] dmar: parse DMAR table failure.
[    0.037190] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.073333] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T6600  @ 2.20GHz (fam: 06, model: 17, stepping: 0a)
[    0.073333] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.073333] ... version:                2
[    0.073333] ... bit width:              40
[    0.073333] ... generic registers:      2
[    0.073333] ... value mask:             000000ffffffffff
[    0.073333] ... max period:             000000007fffffff
[    0.073333] ... fixed-purpose events:   3
[    0.073333] ... event mask:             0000000700000003
[    0.093404] x86: Booting SMP configuration:
[    0.093406] .... node  #0, CPUs:      #1
[    0.106642] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.106658] x86: Booted up 1 node, 2 CPUs
[    0.106660] smpboot: Total of 2 processors activated (8781.75 BogoMIPS)
[    0.108161] devtmpfs: initialized
[    0.110021] PM: Registering ACPI NVS region [mem 0xbfd81000-0xbfdbefff] (253952 bytes)
[    0.110117] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.110159] pinctrl core: initialized pinctrl subsystem
[    0.110159] RTC time: 22:21:50, date: 11/09/15
[    0.110225] NET: Registered protocol family 16
[    0.123337] cpuidle: using governor ladder
[    0.140004] cpuidle: using governor menu
[    0.140038] ACPI: bus type PCI registered
[    0.140040] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.140131] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.140134] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.140255] PCI: Using configuration type 1 for base access
[    0.140411] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.140413] mtrr: probably your BIOS does not setup all CPUs.
[    0.140414] mtrr: corrected configuration.
[    0.153388] ACPI: Added _OSI(Module Device)
[    0.153390] ACPI: Added _OSI(Processor Device)
[    0.153392] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.153394] ACPI: Added _OSI(Processor Aggregator Device)
[    0.158793] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.303707] ACPI: Dynamic OEM Table Load:
[    0.303715] ACPI: SSDT 0xFFFF8800BB58C800 000223 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.304330] ACPI: Dynamic OEM Table Load:
[    0.304338] ACPI: SSDT 0xFFFF8800BF417000 0005B3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.305184] ACPI: Dynamic OEM Table Load:
[    0.305191] ACPI: SSDT 0xFFFF8800BB53B000 0001CF (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.305763] ACPI: Dynamic OEM Table Load:
[    0.305770] ACPI: SSDT 0xFFFF8800BB5346C0 00008D (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.306396] ACPI : EC: EC started
[    0.310047] ACPI: Interpreter enabled
[    0.310057] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
[    0.310064] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[    0.310087] ACPI: (supports S0 S3 S4 S5)
[    0.310089] ACPI: Using IOAPIC for interrupt routing
[    0.310124] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.318603] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.318603] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.318603] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
[    0.318603] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    0.318603] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.318603] PCI host bridge to bus 0000:00
[    0.318603] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.318603] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.318603] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.318603] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.318603] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.318603] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    0.318603] DMAR: Forcing write-buffer flush capability
[    0.318603] DMAR: Disabling IOMMU for graphics on this chipset
[    0.318603] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[    0.318603] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.320108] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.320162] pci 0000:00:1a.0: reg 0x20: [io  0x80e0-0x80ff]
[    0.320270] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.320326] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.320380] pci 0000:00:1a.1: reg 0x20: [io  0x80c0-0x80df]
[    0.320487] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.320554] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.320577] pci 0000:00:1a.7: reg 0x10: [mem 0xda105c00-0xda105fff]
[    0.320679] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.320723] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.320785] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.320807] pci 0000:00:1b.0: reg 0x10: [mem 0xda100000-0xda103fff 64bit]
[    0.320898] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.320990] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.321078] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.321178] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[    0.321267] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.321313] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.321373] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[    0.321461] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.321561] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[    0.321649] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.321748] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[    0.321836] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.321885] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.321943] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.321997] pci 0000:00:1d.0: reg 0x20: [io  0x80a0-0x80bf]
[    0.322102] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.322161] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.322215] pci 0000:00:1d.1: reg 0x20: [io  0x8080-0x809f]
[    0.322341] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.322395] pci 0000:00:1d.2: reg 0x20: [io  0x8060-0x807f]
[    0.322520] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[    0.322574] pci 0000:00:1d.3: reg 0x20: [io  0x8040-0x805f]
[    0.322701] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.322724] pci 0000:00:1d.7: reg 0x10: [mem 0xda105800-0xda105bff]
[    0.322825] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.322869] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.322926] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.323023] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.323080] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[    0.323280] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[    0.323300] pci 0000:00:1f.2: reg 0x10: [io  0x8108-0x810f]
[    0.323311] pci 0000:00:1f.2: reg 0x14: [io  0x8114-0x8117]
[    0.323321] pci 0000:00:1f.2: reg 0x18: [io  0x8100-0x8107]
[    0.323332] pci 0000:00:1f.2: reg 0x1c: [io  0x8110-0x8113]
[    0.323343] pci 0000:00:1f.2: reg 0x20: [io  0x8020-0x803f]
[    0.323354] pci 0000:00:1f.2: reg 0x24: [mem 0xda105000-0xda1057ff]
[    0.323404] pci 0000:00:1f.2: PME# supported from D3hot
[    0.323496] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.323516] pci 0000:00:1f.3: reg 0x10: [mem 0xda106000-0xda1060ff 64bit]
[    0.323544] pci 0000:00:1f.3: reg 0x20: [io  0x8000-0x801f]
[    0.323656] pci 0000:00:1f.6: [8086:2932] type 00 class 0x118000
[    0.323684] pci 0000:00:1f.6: reg 0x10: [mem 0xda104000-0xda104fff 64bit]
[    0.323899] pci 0000:01:00.0: [1002:9480] type 00 class 0x030000
[    0.323917] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[    0.323929] pci 0000:01:00.0: reg 0x14: [io  0x7000-0x70ff]
[    0.323941] pci 0000:01:00.0: reg 0x18: [mem 0xda000000-0xda00ffff]
[    0.323980] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.324026] pci 0000:01:00.0: supports D1 D2
[    0.324096] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
[    0.324115] pci 0000:01:00.1: reg 0x10: [mem 0xda010000-0xda013fff]
[    0.324216] pci 0000:01:00.1: supports D1 D2
[    0.330016] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.330020] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
[    0.330023] pci 0000:00:01.0:   bridge window [mem 0xda000000-0xda0fffff]
[    0.330028] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.330327] pci 0000:02:00.0: [14e4:4315] type 00 class 0x028000
[    0.330402] pci 0000:02:00.0: reg 0x10: [mem 0xd9000000-0xd9003fff 64bit]
[    0.330762] pci 0000:02:00.0: supports D1 D2
[    0.330928] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.330933] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
[    0.330938] pci 0000:00:1c.0:   bridge window [mem 0xd9000000-0xd9ffffff]
[    0.330945] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.331095] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.331165] pci 0000:03:00.0: reg 0x10: [io  0x5000-0x50ff]
[    0.331266] pci 0000:03:00.0: reg 0x18: [mem 0xd1010000-0xd1010fff 64bit pref]
[    0.331334] pci 0000:03:00.0: reg 0x20: [mem 0xd1000000-0xd100ffff 64bit pref]
[    0.331374] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.331594] pci 0000:03:00.0: supports D1 D2
[    0.331596] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.331697] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.331822] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.331827] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.331832] pci 0000:00:1c.1:   bridge window [mem 0xd8000000-0xd8ffffff]
[    0.331839] pci 0000:00:1c.1:   bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[    0.331897] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.331902] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.331906] pci 0000:00:1c.3:   bridge window [mem 0xd7000000-0xd7ffffff]
[    0.331914] pci 0000:00:1c.3:   bridge window [mem 0xd2000000-0xd2ffffff 64bit pref]
[    0.332034] pci 0000:06:00.0: [197b:2380] type 00 class 0x0c0010
[    0.332065] pci 0000:06:00.0: reg 0x10: [mem 0xd6000000-0xd60007ff]
[    0.332084] pci 0000:06:00.0: reg 0x14: [mem 0xd6000d00-0xd6000d7f]
[    0.332136] pci 0000:06:00.0: reg 0x20: [mem 0xd6000c80-0xd6000cff]
[    0.332155] pci 0000:06:00.0: reg 0x24: [mem 0xd6000c00-0xd6000c7f]
[    0.332327] pci 0000:06:00.1: [197b:2382] type 00 class 0x088000
[    0.332354] pci 0000:06:00.1: reg 0x10: [mem 0xd6000b00-0xd6000bff]
[    0.332585] pci 0000:06:00.2: [197b:2381] type 00 class 0x080501
[    0.332611] pci 0000:06:00.2: reg 0x10: [mem 0xd6000a00-0xd6000aff]
[    0.333419] pci 0000:06:00.3: [197b:2383] type 00 class 0x088000
[    0.333446] pci 0000:06:00.3: reg 0x10: [mem 0xd6000900-0xd60009ff]
[    0.333677] pci 0000:06:00.4: [197b:2384] type 00 class 0x088000
[    0.333704] pci 0000:06:00.4: reg 0x10: [mem 0xd6000800-0xd60008ff]
[    0.340025] pci 0000:00:1c.4: PCI bridge to [bus 06]
[    0.340031] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.340035] pci 0000:00:1c.4:   bridge window [mem 0xd6000000-0xd6ffffff]
[    0.340043] pci 0000:00:1c.4:   bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
[    0.340148] acpiphp: Slot [1] registered
[    0.340155] pci 0000:00:1c.5: PCI bridge to [bus 07-09]
[    0.340160] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.340165] pci 0000:00:1c.5:   bridge window [mem 0xd5000000-0xd5ffffff]
[    0.340172] pci 0000:00:1c.5:   bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
[    0.340268] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
[    0.340280] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.340283] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.340286] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.340288] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[    0.340642] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.340710] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[    0.340776] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.340842] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.340907] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[    0.340974] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[    0.341040] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[    0.341106] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.341945] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.342003] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.342110] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.342110] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.342110] vgaarb: loaded
[    0.342110] vgaarb: bridge control possible 0000:01:00.0
[    0.342110] PCI: Using ACPI for IRQ routing
[    0.344214] PCI: pci_cache_line_size set to 64 bytes
[    0.344708] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.344710] e820: reserve RAM buffer [mem 0xbfca8000-0xbfffffff]
[    0.344712] e820: reserve RAM buffer [mem 0xbfd81000-0xbfffffff]
[    0.344714] e820: reserve RAM buffer [mem 0xbfddf000-0xbfffffff]
[    0.344715] e820: reserve RAM buffer [mem 0xbfe00000-0xbfffffff]
[    0.344861] NetLabel: Initializing
[    0.344863] NetLabel:  domain hash size = 128
[    0.344864] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.344883] NetLabel:  unlabeled traffic allowed by default
[    0.344908] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.344914] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.344919] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.346694] Switched to clocksource hpet
[    0.354859] pnp: PnP ACPI init
[    0.354989] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.354995] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.355568] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.355572] system 00:01: [io  0x0600-0x060f] has been reserved
[    0.355575] system 00:01: [io  0x0610] has been reserved
[    0.355578] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.355580] system 00:01: [io  0x0810-0x0817] has been reserved
[    0.355583] system 00:01: [io  0x0820-0x0823] has been reserved
[    0.355586] system 00:01: [io  0x0400-0x047f] could not be reserved
[    0.355588] system 00:01: [io  0x0500-0x053f] has been reserved
[    0.355591] system 00:01: [io  0x0380-0x038e] has been reserved
[    0.355594] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.355597] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.355599] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.355602] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.355605] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.355608] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.355610] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.355613] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.355616] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.355618] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.355622] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.355672] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.355761] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.355816] pnp 00:04: Plug and Play ACPI device, IDs SYN1e04 SYN1e00 SYN0002 PNP0f13 (active)
[    0.355890] pnp 00:05: Plug and Play ACPI device, IDs ENE0100 (active)
[    0.356102] pnp: PnP ACPI: found 6 devices
[    0.363308] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.363317] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.363320] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.363390] pci 0000:01:00.0: BAR 6: assigned [mem 0xda020000-0xda03ffff pref]
[    0.363393] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.363396] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
[    0.363401] pci 0000:00:01.0:   bridge window [mem 0xda000000-0xda0fffff]
[    0.363404] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.363409] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.363413] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
[    0.363419] pci 0000:00:1c.0:   bridge window [mem 0xd9000000-0xd9ffffff]
[    0.363424] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.363432] pci 0000:03:00.0: BAR 6: assigned [mem 0xd8000000-0xd800ffff pref]
[    0.363434] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.363438] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.363444] pci 0000:00:1c.1:   bridge window [mem 0xd8000000-0xd8ffffff]
[    0.363448] pci 0000:00:1c.1:   bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[    0.363455] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.363459] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.363465] pci 0000:00:1c.3:   bridge window [mem 0xd7000000-0xd7ffffff]
[    0.363469] pci 0000:00:1c.3:   bridge window [mem 0xd2000000-0xd2ffffff 64bit pref]
[    0.363477] pci 0000:00:1c.4: PCI bridge to [bus 06]
[    0.363480] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.363486] pci 0000:00:1c.4:   bridge window [mem 0xd6000000-0xd6ffffff]
[    0.363491] pci 0000:00:1c.4:   bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
[    0.363498] pci 0000:00:1c.5: PCI bridge to [bus 07-09]
[    0.363501] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.363507] pci 0000:00:1c.5:   bridge window [mem 0xd5000000-0xd5ffffff]
[    0.363512] pci 0000:00:1c.5:   bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
[    0.363519] pci 0000:00:1e.0: PCI bridge to [bus 0a]
[    0.363533] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.363535] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.363538] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.363540] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[    0.363543] pci_bus 0000:01: resource 0 [io  0x7000-0x7fff]
[    0.363545] pci_bus 0000:01: resource 1 [mem 0xda000000-0xda0fffff]
[    0.363547] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.363550] pci_bus 0000:02: resource 0 [io  0x6000-0x6fff]
[    0.363552] pci_bus 0000:02: resource 1 [mem 0xd9000000-0xd9ffffff]
[    0.363555] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.363557] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    0.363559] pci_bus 0000:03: resource 1 [mem 0xd8000000-0xd8ffffff]
[    0.363562] pci_bus 0000:03: resource 2 [mem 0xd1000000-0xd1ffffff 64bit pref]
[    0.363564] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.363566] pci_bus 0000:05: resource 1 [mem 0xd7000000-0xd7ffffff]
[    0.363569] pci_bus 0000:05: resource 2 [mem 0xd2000000-0xd2ffffff 64bit pref]
[    0.363571] pci_bus 0000:06: resource 0 [io  0x3000-0x3fff]
[    0.363574] pci_bus 0000:06: resource 1 [mem 0xd6000000-0xd6ffffff]
[    0.363576] pci_bus 0000:06: resource 2 [mem 0xd3000000-0xd3ffffff 64bit pref]
[    0.363578] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.363581] pci_bus 0000:07: resource 1 [mem 0xd5000000-0xd5ffffff]
[    0.363583] pci_bus 0000:07: resource 2 [mem 0xd4000000-0xd4ffffff 64bit pref]
[    0.363586] pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7 window]
[    0.363588] pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff window]
[    0.363590] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.363593] pci_bus 0000:0a: resource 7 [mem 0xc0000000-0xfebfffff window]
[    0.363631] NET: Registered protocol family 2
[    0.363859] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.364005] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.364206] TCP: Hash tables configured (established 32768 bind 32768)
[    0.364259] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.364295] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.364366] NET: Registered protocol family 1
[    0.366808] pci 0000:01:00.0: Video device with shadowed ROM
[    0.367033] PCI: CLS 64 bytes, default 64
[    0.367099] Unpacking initramfs...
[    0.460469] Freeing initrd memory: 5296K (ffff880037598000 - ffff880037ac4000)
[    0.460517] Simple Boot Flag at 0x44 set to 0x1
[    0.460659] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa0b
[    0.460666] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa0b
[    0.460760] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.460797] Scanning for low memory corruption every 60 seconds
[    0.461187] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.461228] Initialise system trusted keyring
[    0.461616] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.463896] zpool: loaded
[    0.463899] zbud: loaded
[    0.464066] VFS: Disk quotas dquot_6.6.0
[    0.464120] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.464346] Key type big_key registered
[    0.464613] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.464656] io scheduler noop registered
[    0.464659] io scheduler deadline registered
[    0.464703] io scheduler cfq registered
[    0.464743] io scheduler bfq registered (default)
[    0.464745] BFQ I/O-scheduler: v7r8
[    0.466342] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.466346] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.466348] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[    0.466352] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.466374] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.466376] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.466381] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.466402] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.466405] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.466409] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.466432] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.466437] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.466460] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.466462] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[    0.466464] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[    0.466466] pci 0000:06:00.2: Signaling PME through PCIe PME interrupt
[    0.466469] pci 0000:06:00.3: Signaling PME through PCIe PME interrupt
[    0.466471] pci 0000:06:00.4: Signaling PME through PCIe PME interrupt
[    0.466476] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.466496] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    0.466501] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    0.466510] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.466533] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.466555] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.466557] vesafb: scrolling: redraw
[    0.466559] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.466581] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90000800000, using 3072k, total 3072k
[    0.514312] Console: switching to colour frame buffer device 128x48
[    0.561877] fb0: VESA VGA frame buffer device
[    0.561902] intel_idle: does not run on family 6 model 23
[    0.561952] GHES: HEST is not enabled!
[    0.562024] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.562544] Linux agpgart interface v0.103
[    0.562764] rtc_cmos 00:02: RTC can wake from S4
[    0.562912] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.562945] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.562960] ledtrig-cpu: registered to indicate activity on CPUs
[    0.563389] NET: Registered protocol family 10
[    0.563649] NET: Registered protocol family 17
[    0.563989] Loading compiled-in X.509 certificates
[    0.564007] registered taskstats version 1
[    0.564814]   Magic number: 7:863:400
[    0.564916] rtc_cmos 00:02: setting system clock to 2015-11-09 22:21:51 UTC (1447107711)
[    0.565008] PM: Hibernation image not present or could not be loaded.
[    0.565539] Freeing unused kernel memory: 1184K (ffffffff818e3000 - ffffffff81a0b000)
[    0.565541] Write protecting the kernel read-only data: 8192k
[    0.565829] Freeing unused kernel memory: 368K (ffff8800015a4000 - ffff880001600000)
[    0.565988] Freeing unused kernel memory: 300K (ffff8800017b5000 - ffff880001800000)
[    0.574068] random: systemd-tmpfile urandom read with 3 bits of entropy available
[    0.624186] ACPI: bus type USB registered
[    0.624230] usbcore: registered new interface driver usbfs
[    0.624245] usbcore: registered new interface driver hub
[    0.625253] usbcore: registered new device driver usb
[    0.625943] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.626306] uhci_hcd: USB Universal Host Controller Interface driver
[    0.626556] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.626565] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.626576] uhci_hcd 0000:00:1a.0: detected 2 ports
[    0.626613] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000080e0
[    0.627020] ehci-pci: EHCI PCI platform driver
[    0.627419] hub 1-0:1.0: USB hub found
[    0.627429] hub 1-0:1.0: 2 ports detected
[    0.627892] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.627900] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 2
[    0.627916] ehci-pci 0000:00:1a.7: debug port 1
[    0.631841] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    0.631869] ehci-pci 0000:00:1a.7: irq 19, io mem 0xda105c00
[    0.636135] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    0.643359] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.643626] hub 2-0:1.0: USB hub found
[    0.643636] hub 2-0:1.0: 4 ports detected
[    0.659750] sdhci: Secure Digital Host Controller Interface driver
[    0.659754] sdhci: Copyright(c) Pierre Ossman
[    0.660073] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
[    0.660217] sdhci-pci 0000:06:00.1: No vmmc regulator found
[    0.660219] sdhci-pci 0000:06:00.1: No vqmmc regulator found
[    0.666695] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
[    0.666718] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[    0.666817] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[    0.667203] hub 1-0:1.0: USB hub found
[    0.667216] hub 1-0:1.0: 2 ports detected
[    0.667517] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.667526] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
[    0.667542] ehci-pci 0000:00:1d.7: debug port 1
[    0.671451] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.671472] ehci-pci 0000:00:1d.7: irq 20, io mem 0xda105800
[    0.671637] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.671699] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.674525] SCSI subsystem initialized
[    0.676570] libata version 3.00 loaded.
[    0.680035] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.680291] hub 3-0:1.0: USB hub found
[    0.680301] hub 3-0:1.0: 8 ports detected
[    0.680906] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.680916] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.680925] uhci_hcd 0000:00:1a.1: detected 2 ports
[    0.680961] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000080c0
[    0.681184] hub 4-0:1.0: USB hub found
[    0.681193] hub 4-0:1.0: 2 ports detected
[    0.681484] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.681493] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.681503] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.681526] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000080a0
[    0.681724] hub 5-0:1.0: USB hub found
[    0.681733] hub 5-0:1.0: 2 ports detected
[    0.682021] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.682030] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.682038] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.682061] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008080
[    0.682261] hub 6-0:1.0: USB hub found
[    0.682272] hub 6-0:1.0: 2 ports detected
[    0.682570] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.682577] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.682586] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.682609] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00008060
[    0.682812] hub 7-0:1.0: USB hub found
[    0.682821] hub 7-0:1.0: 2 ports detected
[    0.683125] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.683132] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    0.683140] uhci_hcd 0000:00:1d.3: detected 2 ports
[    0.683173] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00008040
[    0.683411] hub 8-0:1.0: USB hub found
[    0.683420] hub 8-0:1.0: 2 ports detected
[    0.684337] ahci 0000:00:1f.2: version 3.0
[    0.685042] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.685076] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    0.685080] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[    0.714199] scsi host0: ahci
[    0.714336] scsi host1: ahci
[    0.714452] scsi host2: ahci
[    0.714568] scsi host3: ahci
[    0.714680] scsi host4: ahci
[    0.714794] scsi host5: ahci
[    0.714865] ata1: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105100 irq 30
[    0.714868] ata2: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105180 irq 30
[    0.714870] ata3: DUMMY
[    0.714871] ata4: DUMMY
[    0.714874] ata5: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105300 irq 30
[    0.714876] ata6: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105380 irq 30
[    0.719810] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.726731] firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 0 IT contexts, quirks 0x10
[    0.986689] usb 3-4: new high-speed USB device number 2 using ehci-pci
[    1.113345] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[    1.200027] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.205872] ata1.00: ATA-8: SAMSUNG HM321HI, 2AJ10002, max UDMA/133
[    1.205875] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.211753] ata1.00: configured for UDMA/133
[    1.211882] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM321HI  0002 PQ: 0 ANSI: 5
[    1.226766] firewire_core 0000:06:00.0: created device fw0: GUID 00241b00b063a701, S400
[    1.292685] hidraw: raw HID events driver (C) Jiri Kosina
[    1.307629] usbcore: registered new interface driver usbhid
[    1.307632] usbhid: USB HID core driver
[    1.308323] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:093A:2510.0001/input/input2
[    1.308379] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.1-1/input0
[    1.433347] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[    1.460018] tsc: Refined TSC clocksource calibration: 2194.499 MHz
[    1.460022] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa1e62ef0c, max_idle_ns: 440795276831 ns
[    1.696691] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.700754] ata2.00: ATAPI: hp       DVDRAM GT20L, DC05, max UDMA/100
[    1.705622] ata2.00: configured for UDMA/100
[    1.711126] scsi 1:0:0:0: CD-ROM            hp       DVDRAM GT20L     DC05 PQ: 0 ANSI: 5
[    2.040022] ata5: SATA link down (SStatus 0 SControl 300)
[    2.360022] ata6: SATA link down (SStatus 0 SControl 300)
[    2.362994] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.363040] sd 0:0:0:0: [sda] Write Protect is off
[    2.363044] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.363063] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.376425] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.376429] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.376611] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.390311]  sda: sda1 sda2 sda3 sda4
[    2.390716] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.460068] Switched to clocksource tsc
[    3.203263] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.756866] random: nonblocking pool is initialized
[    4.146558] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.216436] systemd[1]: systemd 227 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[    4.216580] systemd[1]: Detected architecture x86-64.
[    4.255314] systemd[1]: Set hostname to <ata>.
[    5.525007] systemd[1]: Listening on Journal Socket.
[    5.525078] systemd[1]: Reached target Encrypted Volumes.
[    5.525125] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.525167] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.525590] systemd[1]: Created slice System Slice.
[    5.526225] systemd[1]: Starting Setup Virtual Console...
[    5.526295] systemd[1]: Listening on udev Kernel Socket.
[    5.526372] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.526426] systemd[1]: Listening on udev Control Socket.
[    5.526599] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    5.526635] systemd[1]: Reached target Login Prompts.
[    5.554048] systemd[1]: Mounting Temporary Directory...
[    5.554733] systemd[1]: Mounting POSIX Message Queue File System...
[    5.555471] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.555628] systemd[1]: Created slice User and Session Slice.
[    5.555656] systemd[1]: Reached target Slices.
[    5.555756] systemd[1]: Listening on LVM2 metadata daemon socket.
[    5.555912] systemd[1]: Created slice system-getty.slice.
[    5.556607] systemd[1]: Mounting Debug File System...
[    5.556654] systemd[1]: Reached target Remote File Systems.
[    5.577802] systemd[1]: Starting Load Kernel Modules...
[    5.577892] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.577924] systemd[1]: Reached target Swap.
[    5.578136] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.607310] systemd[1]: Starting Set Up Additional Binary Formats...
[    5.608058] systemd[1]: Mounting Huge Pages File System...
[    5.608780] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.750268] systemd[1]: Starting Journal Service...
[    5.758882] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.011781] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 160 (systemd-binfmt)
[    6.012516] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[    6.895712] FS-Cache: Loaded
[    6.919499] RPC: Registered named UNIX socket transport module.
[    6.919504] RPC: Registered udp transport module.
[    6.919506] RPC: Registered tcp transport module.
[    6.919507] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    6.945590] FS-Cache: Netfs 'nfs' registered for caching
[    8.430838] systemd[1]: Started Journal Service.
[    9.246020] EXT4-fs (sda3): re-mounted. Opts: (null)
[    9.741833] Monitor-Mwait will be used to enter C-1 state
[    9.741848] Monitor-Mwait will be used to enter C-2 state
[    9.741857] Monitor-Mwait will be used to enter C-3 state
[    9.741865] tsc: Marking TSC unstable due to TSC halts in idle
[    9.741879] ACPI: acpi_idle registered with cpuidle
[    9.742329] Switched to clocksource hpet
[   10.974580] systemd-journald[165]: Received request to flush runtime journal from PID 1
[   11.961000] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[   11.961007] ACPI: Power Button [PWRB]
[   11.961073] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[   11.961385] ACPI: Lid Switch [LID0]
[   11.961446] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[   11.961449] ACPI: Sleep Button [SLPB]
[   11.961538] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   11.961541] ACPI: Power Button [PWRF]
[   12.065660] ACPI: AC Adapter [ACAD] (on-line)
[   12.100163] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xd2
[   12.100167] ene_ir: PLL freq = 1406
[   12.100169] ene_ir: KB3926D or higher detected
[   12.100182] ene_ir: Firmware regs: c0 00
[   12.100183] ene_ir: Hardware features:
[   12.100184] ene_ir: * Uses GPIO 40 for IR demodulated input
[   12.104183] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.104519] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   12.106119] ACPI Error: [_T_1] Namespace lookup failure, AE_ALREADY_EXISTS (20150410/dswload2-330)
[   12.106127] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20150410/psobject-224)
[   12.106131] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD1.GBQC] (Node ffff8800bf4a69b0), AE_ALREADY_EXISTS (20150410/psparse-536)
[   12.106140] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD1._BQC] (Node ffff8800bf4a6988), AE_ALREADY_EXISTS (20150410/psparse-536)
[   12.106146] ACPI: Marking method _BQC as Serialized because of AE_ALREADY_EXISTS error
[   12.106151] ACPI Warning: Evaluating _BQC failed (20150410/video-660)
[   12.107699] acpi device:09: registered as cooling_device2
[   12.107781] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input8
[   12.154470] [Firmware Bug]: Invalid critical threshold (0)
[   12.155882] thermal LNXTHERM:00: registered as thermal_zone0
[   12.155885] ACPI: Thermal Zone [TZ01] (68 C)
[   12.183405] Registered IR keymap rc-rc6-mce
[   12.183566] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input7
[   12.183620] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[   12.190042] ene_ir: driver has been successfully loaded
[   12.258426] ACPI: Battery Slot [BAT0] (battery present)
[   12.258667] wmi: Mapper loaded
[   12.340118] IR Sony protocol handler initialized
[   12.340118] IR RC6 protocol handler initialized
[   12.340599] IR XMP protocol handler initialized
[   12.340735] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input9
[   12.340742] IR MCE Keyboard/mouse protocol handler initialized
[   12.341124] IR Sharp protocol handler initialized
[   12.341477] lirc_dev: IR Remote Control driver registered, major 249
[   12.341830] IR RC5(x/sz) protocol handler initialized
[   12.342258] IR JVC protocol handler initialized
[   12.342658] IR SANYO protocol handler initialized
[   12.373269] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[   12.373273] IR LIRC bridge handler initialized
[   12.394083] IR NEC protocol handler initialized
[   12.483998] hp_accel: laptop model unknown, using default axes configuration
[   12.496746] lis3lv02d: 8 bits sensor found
[   12.680175] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input10
[   12.739272] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   12.739788] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc90000754000, 00:26:9e:89:f3:3c, XID 1c4000c0 IRQ 31
[   12.739792] r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[   12.830288] ssb: Found chip with id 0x4312, rev 0x01 and package 0x00
[   12.830308] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[   12.830324] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[   12.830340] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[   12.830353] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[   12.877217] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
[   12.922655] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   12.938864] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20150410/utaddress-254)
[   12.938872] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.938877] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000050F (\GPIO) (20150410/utaddress-254)
[   12.938882] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.938916] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.984517] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD75B3X5: line_outs=1 (0xf/0x0/0x0/0x0/0x0) type:line
[   12.984525] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[   12.984613] snd_hda_codec_idt hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.984615] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   12.984618] snd_hda_codec_idt hdaudioC0D0:    dig-out=0x1e/0x0
[   12.984620] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   12.984623] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x18
[   12.984626] snd_hda_codec_idt hdaudioC0D0:      Mic=0xb
[   12.984850] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   13.014061] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   13.014777] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   13.014826] input: HDA Intel Front Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   13.153875] ACPI Warning: SystemIO range 0x0000000000008000-0x000000000000801F conflicts with OpRegion 0x0000000000008000-0x000000000000800F (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254)
[   13.153883] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.361492] [drm] Initialized drm 1.1.0 20060810
[   13.583367] mousedev: PS/2 mouse device common for all mice
[   13.840496] cfg80211: Calling CRDA to update world regulatory domain
[   13.849816] iTCO_vendor_support: vendor-support=0
[   13.862954] gpio_ich: GPIO from 435 to 495 on gpio_ich
[   13.936657] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   13.936746] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[   13.936874] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   14.060042] r8169 0000:03:00.0 enp3s0: renamed from eth0
[   14.207826] input: HP WMI hotkeys as /devices/virtual/input/input16
[   14.508439] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0, board id: 0, fw id: 428212
[   14.601338] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input15
[   14.667750] [drm] radeon kernel modesetting enabled.
[   14.768307] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[   14.768311] AMD IOMMUv2 functionality not available on this system
[   14.817085] CRAT table not found
[   14.817089] Finished initializing topology ret=0
[   14.817141] kfd kfd: Initialized module
[   14.817494] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[   14.817497] fb: switching to radeondrmfb from VESA VGA
[   14.817522] Console: switching to colour dummy device 80x25
[   14.817898] [drm] initializing kernel modesetting (RV730 0x1002:0x9480 0x103C:0x3628).
[   14.817917] [drm] register mmio base: 0xDA000000
[   14.817918] [drm] register mmio size: 65536
[   14.818003] ATOM BIOS: BR40443.001
[   14.818051] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   14.818054] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[   14.818057] [drm] Detected VRAM RAM=1024M, BAR=256M
[   14.818058] [drm] RAM width 128bits DDR
[   14.818107] [TTM] Zone  kernel: Available graphics memory: 1541598 kiB
[   14.818108] [TTM] Initializing pool allocator
[   14.818115] [TTM] Initializing DMA pool allocator
[   14.818138] [drm] radeon: 1024M of VRAM memory ready
[   14.818140] [drm] radeon: 1024M of GTT memory ready.
[   14.818153] [drm] Loading RV730 Microcode
[   15.063955] Non-volatile memory driver v1.3
[   15.128309] Bluetooth: Core ver 2.20
[   15.128336] NET: Registered protocol family 31
[   15.128338] Bluetooth: HCI device and connection manager initialized
[   15.128344] Bluetooth: HCI socket layer initialized
[   15.128347] Bluetooth: L2CAP socket layer initialized
[   15.128355] Bluetooth: SCO socket layer initialized
[   15.405164] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[   15.431375] b43-phy0: Found PHY: Analog 6, Type 5 (LP), Revision 1
[   15.431392] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2062, Revision 2, Version 0
[   15.441615] Broadcom 43xx driver loaded [ Features: PMNLS ]
[   15.490845] media: Linux media interface: v0.10
[   15.549208] [drm] radeon: dpm initialized
[   15.558412] usbcore: registered new interface driver btusb
[   15.730692] cfg80211: World regulatory domain updated:
[   15.730697] cfg80211:  DFS Master region: unset
[   15.730699] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   15.730702] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   15.730704] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   15.730706] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   15.730709] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   15.730712] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   15.730714] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   15.730717] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   15.730719] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   15.786137] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.792973] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   15.815899] [drm] PCIE GART of 1024M enabled (table at 0x000000000025E000).
[   15.815965] radeon 0000:01:00.0: WB enabled
[   15.815969] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800b30c6c00
[   15.815972] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800b30c6c0c
[   15.834842] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc90001c1c598
[   15.834848] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   15.834849] [drm] Driver supports precise vblank timestamp query.
[   15.834852] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[   15.834888] radeon 0000:01:00.0: radeon: using MSI.
[   15.834916] [drm] radeon: irq initialized.
[   15.845152] Linux video capture interface: v2.00
[   15.883936] [drm] ring test on 0 succeeded in 1 usecs
[   15.883946] [drm] ring test on 3 succeeded in 2 usecs
[   16.065595] [drm] ring test on 5 succeeded in 1 usecs
[   16.065603] [drm] UVD initialized successfully.
[   16.065786] [drm] ib test on ring 0 succeeded in 0 usecs
[   16.065808] [drm] ib test on ring 3 succeeded in 0 usecs
[   16.667752] uvcvideo: Found UVC 1.00 device HP Webcam (064e:a127)
[   16.684602] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb3/3-4/3-4:1.0/input/input17
[   16.684707] usbcore: registered new interface driver uvcvideo
[   16.684709] USB Video Class driver (1.1.1)
[   16.713411] [drm] ib test on ring 5 succeeded
[   16.714097] [drm] radeon atom DIG backlight initialized
[   16.714100] [drm] Radeon Display Connectors
[   16.714102] [drm] Connector 0:
[   16.714103] [drm]   LVDS-1
[   16.714105] [drm]   DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
[   16.714106] [drm]   Encoders:
[   16.714108] [drm]     LCD1: INTERNAL_UNIPHY2
[   16.714109] [drm] Connector 1:
[   16.714110] [drm]   VGA-1
[   16.714112] [drm]   DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac
[   16.714114] [drm]   Encoders:
[   16.714115] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   16.714116] [drm] Connector 2:
[   16.714117] [drm]   HDMI-A-1
[   16.714118] [drm]   HPD1
[   16.714120] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   16.714122] [drm]   Encoders:
[   16.714123] [drm]     DFP1: INTERNAL_UNIPHY
[   16.910485] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   16.912644] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[   17.696669] [drm] fb mappable at 0xC045F000
[   17.696693] [drm] vram apper at 0xC0000000
[   17.696695] [drm] size 4325376
[   17.696697] [drm] fb depth is 24
[   17.696699] [drm]    pitch is 5632
[   17.696836] fbcon: radeondrmfb (fb0) is primary device
[   17.696895] Console: switching to colour frame buffer device 170x48
[   17.696906] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   17.696909] radeon 0000:01:00.0: registered panic notifier
[   17.720587] [drm] Initialized radeon 2.42.0 20080528 for 0000:01:00.0 on minor 0
[   18.733213] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.733218] Bluetooth: BNEP filters: protocol multicast
[   18.733224] Bluetooth: BNEP socket layer initialized
[   27.235432] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   27.244727] r8169 0000:03:00.0 enp3s0: link down
[   27.244823] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   27.246783] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   27.416740] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   28.682927] fuse init (API version 7.23)
[   32.066941] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   32.256320] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   34.603148] wlan0: authenticate with 00:1c:a8:d4:d9:b4
[   34.617077] wlan0: send auth to 00:1c:a8:d4:d9:b4 (try 1/3)
[   34.618858] wlan0: authenticated
[   34.619013] b43 ssb0:0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   34.619016] b43 ssb0:0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   34.619019] b43 ssb0:0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   34.620188] wlan0: associate with 00:1c:a8:d4:d9:b4 (try 1/3)
[   34.622556] wlan0: RX AssocResp from 00:1c:a8:d4:d9:b4 (capab=0x411 status=0 aid=1)
[   34.623043] wlan0: associated
[   34.623073] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   59.247040] Bluetooth: RFCOMM TTY layer initialized
[   59.247050] Bluetooth: RFCOMM socket layer initialized
[   59.247058] Bluetooth: RFCOMM ver 1.11
[  790.117676] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2443.021004] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)



umarım çözeriz nette uzun bir araştırma yaptım konular var çözüme ulaşılan konuya rastlamadım size sorma gereği duydum

[heartsmagic]

Grub üzerinde Xen'e ait bir satır görünüyor mu, sistem onunla mı açıldı?

[ata1]

/etc/xen/grub.conf

Kod Seç Genişlet

#XEN_HYPERVISOR_CMDLINE="dom0_mem=512M xsave=1"
#XEN_LINUX_CMDLINE="console=tty0"
#XEN_LINUX_CMDLINE_OVERRIDE=0




nano /boot/syslinux/syslinux.cfg

Kod Seç Genişlet

LABEL reboot
        MENU LABEL Reboot
        COM32 reboot.c32

LABEL poweroff
        MENU LABEL Poweroff
        COM32 poweroff.c32
LABEL xen
    MENU LABEL Xen
    KERNEL mboot.c32
    APPEND ../xen-4.5.1-1-x86_64.pkg.tar.xz/vmlinuz-linux console=tty0 root$






╔

Kod Seç Genişlet

═[17:21]═[ata@ata]
╚═══===═══[]>> cp /usr/lib/syslinux/bios/mboot.c32 /boot/syslinux
cp: unwritable `/boot/syslinux/mboot.c32' (mode 0644, rw-r--r--); try anyway?


Kod Seç Genişlet

GRUB_BACKGROUND="<none>"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_COLOR_HIGHLIGHT="green/black"
GRUB_COLOR_NORMAL="light-gray/black"
GRUB_DEFAULT="0"
GRUB_DISABLE_RECOVERY="true"
GRUB_DISTRIBUTOR="Manjaro"
GRUB_GFXMODE="1366x768"
GRUB_GFXPAYLOAD_LINUX="keep"
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
GRUB_SAVEDEFAULT="true"
GRUB_TERMINAL_INPUT="console"
GRUB_THEME="/boot/grub/themes/deepin/theme.txt"
GRUB_TIMEOUT="5"



Kod Seç Genişlet

╔═[18:21]═[ata@ata]
╚═══===═══[]>> sudo  update-grub
Grub yapılandırma dosyası oluşturuluyor ...
Found Xen hypervisor image: /boot/xen-4.5.1.gz
Found Intel Microcode image
Bulunan linux kalıbı: /boot/vmlinuz-4.1-x86_64
Bulunan initrd kalıbı: /boot/initramfs-4.1-x86_64.img
Found initrd fallback image: /boot/initramfs-4.1-x86_64-fallback.img
Bulunan Arch, /dev/sda2 üzerinde
Found memtest86+ image: /boot/memtest86+/memtest.bin
bitti




https://wiki.archlinux.org/index.php/Xen
üstadım bu şekilde arch wikideki işlemleri yapmıştım  ama grub da xen yok


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 10 Kasım 2015 - 18:35:07
sanırım sorun cihazla ilgili Enable Virtualisation Technology" or "Enable Intel VT"  satırın da eski model bir hp dv6 bu ayarlar bios'um da yok sebebi bu olabilir
http://wiki.xenproject.org/wiki/Xen_Project_Beginners_Guide
virtualization support in BIOS

NOTE: This is optional and not required for PV guests
In order to support HVM guests we need to ensure that virtualization extensions are enabled in the BIOS. If you don't wish to start a HVM guest you can skip this step but it is still highly recommended. If your system doesn't support these extensions you cannot use the hypervisor to virtualize unmodified operating systems, however para-virtualization will work fine.
The virtualization option appears differently in different BIOS builds but generally it is referred to as "Enable Virtualisation Technology" or "Enable Intel VT" for Intel chipsets, however in some cases it can be listed as "Vanderpool Technology". Oftentimes this option can be found under the "Advanced Chipset Features" menu in the BIOS. Similar also for AMD.
Consult your motherboard documentation for more assistance in enabling virtualization extensions on your system.

[7hr33l3t73r]

Wiki de System requirements kismin da belirtilmis.
fiziksel donanimin Intel VT-x yada  AMD-V (SVM)   sanallastirma destegi olması gerekir demisler.
Hatta kontrol icin soyle bir komut da vermisler.

Kod Seç Genişlet

$ grep -E "(vmx|svm)" --color=always /proc/cpuinfo
Kuracak arkadaslara ek bir bilgi olarak paylasalim.

[ata1]

komut çıktı vermemişti ben de  diye ekleyeyim ben de   


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 10 Kasım 2015 - 22:23:13
konuyu çözüldü diye işaretledim sorun bulundu ve xen kaldırıldı benim için konu çözüldü

[neynefes]

Başlığı açtım @eral

[ata1]

ben kurulumu kaldırdım üstadım bios da ayarlar yok kurulumu tamamlayamıyorum .Arkadaşlar devam ederse bilemem

[cokomoko]

Bios'tan intel virtualization technology açık olmasına rağmen, xen tanımlı kernellerden sistemi açamıyorum, aslında açılıyor da xorg'a düşemiyorum siyah ekranda kalıyorum, ctrl-alt-f1-f7 arası konsola da düşemiyorum ki ne hata verdiğini göreyim.

Kod Seç Genişlet

└──>>grep -E "(vmx|svm)" --color=always /proc/cpuinfo
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm ida dtherm tpr_shadow vnmi flexpriority
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm ida dtherm tpr_shadow vnmi flexpriority


Kod Seç Genişlet

┌─[cokomoko]──[cokomoko]:/boot$
└──>>ls xen*
xen-4.5.1.gz
grub.cfg

Kod Seç Genişlet

menuentry "Xen 4.5.1 / Arch Linux pkg-linux kernel" --class xen --class arch-linux --class arch --class gnu-linux --class gnu --class os {
   
    if [ x$feature_all_video_module = xy ]; then
        insmod all_video
    fi
    set gfxpayload=keep
    insmod ext2
    if [ x$feature_platform_search_hint = xy ]; then
        search --no-floppy --fs-uuid  --set=root --hint-bios=hd1,msdos9 --hint-efi=hd1,msdos9 --hint-baremetal=ahci1,msdos9  8ff8e885-026a-45be-b2c7-1d52296aeb01
    else
        search --no-floppy --fs-uuid  --set=root 8ff8e885-026a-45be-b2c7-1d52296aeb01
    fi
    echo 'Loading Xen 4.5.1 ...'
    multiboot /boot/xen-4.5.1.gz /boot/xen-4.5.1.gz dom0_mem=4096M xsave=1
    echo 'Loading Arch Linux pkg-linux kernel ...'
    module /boot/vmlinuz-linux /boot/vmlinuz-linux root=UUID=8ff8e885-026a-45be-b2c7-1d52296aeb01 rw  quiet console=tty0
    echo 'Loading Arch Linux pkg-linux kernel initramfs ...'
    module /boot/initramfs-linux.img
}


menuentry "Xen 4.5.1 / Arch Linux pkg-linux kernel (fallback initramfs)" --class xen --class arch-linux --class arch --class gnu-linux --class gnu --class os {
   
    if [ x$feature_all_video_module = xy ]; then
        insmod all_video
    fi
    set gfxpayload=keep
    insmod ext2
    if [ x$feature_platform_search_hint = xy ]; then
        search --no-floppy --fs-uuid  --set=root --hint-bios=hd1,msdos9 --hint-efi=hd1,msdos9 --hint-baremetal=ahci1,msdos9  8ff8e885-026a-45be-b2c7-1d52296aeb01
    else
        search --no-floppy --fs-uuid  --set=root 8ff8e885-026a-45be-b2c7-1d52296aeb01
    fi
    echo 'Loading Xen 4.5.1 ...'
    multiboot /boot/xen-4.5.1.gz /boot/xen-4.5.1.gz dom0_mem=4096M xsave=1
    echo 'Loading Arch Linux pkg-linux kernel ...'
    module /boot/vmlinuz-linux /boot/vmlinuz-linux root=UUID=8ff8e885-026a-45be-b2c7-1d52296aeb01 rw  quiet console=tty0
    echo 'Loading Arch Linux pkg-linux kernel fallback initramfs ...'
    module /boot/initramfs-linux-fallback.img
}


menuentry "Xen 4.5.1 / Arch Linux pkg-linux-ck kernel" --class xen --class arch-linux --class arch --class gnu-linux --class gnu --class os {
   
    if [ x$feature_all_video_module = xy ]; then
        insmod all_video
    fi
    set gfxpayload=keep
    insmod ext2
    if [ x$feature_platform_search_hint = xy ]; then
        search --no-floppy --fs-uuid  --set=root --hint-bios=hd1,msdos9 --hint-efi=hd1,msdos9 --hint-baremetal=ahci1,msdos9  8ff8e885-026a-45be-b2c7-1d52296aeb01
    else
        search --no-floppy --fs-uuid  --set=root 8ff8e885-026a-45be-b2c7-1d52296aeb01
    fi
    echo 'Loading Xen 4.5.1 ...'
    multiboot /boot/xen-4.5.1.gz /boot/xen-4.5.1.gz dom0_mem=4096M xsave=1
    echo 'Loading Arch Linux pkg-linux-ck kernel ...'
    module /boot/vmlinuz-linux-ck /boot/vmlinuz-linux-ck root=UUID=8ff8e885-026a-45be-b2c7-1d52296aeb01 rw  quiet console=tty0
    echo 'Loading Arch Linux pkg-linux-ck kernel initramfs ...'
    module /boot/initramfs-linux-ck.img
}


menuentry "Xen 4.5.1 / Arch Linux pkg-linux-ck kernel (fallback initramfs)" --class xen --class arch-linux --class arch --class gnu-linux --class gnu --class os {
   
    if [ x$feature_all_video_module = xy ]; then
        insmod all_video
    fi
    set gfxpayload=keep
    insmod ext2
    if [ x$feature_platform_search_hint = xy ]; then
        search --no-floppy --fs-uuid  --set=root --hint-bios=hd1,msdos9 --hint-efi=hd1,msdos9 --hint-baremetal=ahci1,msdos9  8ff8e885-026a-45be-b2c7-1d52296aeb01
    else
        search --no-floppy --fs-uuid  --set=root 8ff8e885-026a-45be-b2c7-1d52296aeb01
    fi
    echo 'Loading Xen 4.5.1 ...'
    multiboot /boot/xen-4.5.1.gz /boot/xen-4.5.1.gz dom0_mem=4096M xsave=1
    echo 'Loading Arch Linux pkg-linux-ck kernel ...'
    module /boot/vmlinuz-linux-ck /boot/vmlinuz-linux-ck root=UUID=8ff8e885-026a-45be-b2c7-1d52296aeb01 rw  quiet console=tty0
    echo 'Loading Arch Linux pkg-linux-ck kernel fallback initramfs ...'
    module /boot/initramfs-linux-ck-fallback.img
}


menuentry "Xen 4.5.1 / Arch Linux pkg-linux-lqx kernel" --class xen --class arch-linux --class arch --class gnu-linux --class gnu --class os {
   
    if [ x$feature_all_video_module = xy ]; then
        insmod all_video
    fi
    set gfxpayload=keep
    insmod ext2
    if [ x$feature_platform_search_hint = xy ]; then
        search --no-floppy --fs-uuid  --set=root --hint-bios=hd1,msdos9 --hint-efi=hd1,msdos9 --hint-baremetal=ahci1,msdos9  8ff8e885-026a-45be-b2c7-1d52296aeb01
    else
        search --no-floppy --fs-uuid  --set=root 8ff8e885-026a-45be-b2c7-1d52296aeb01
    fi
    echo 'Loading Xen 4.5.1 ...'
    multiboot /boot/xen-4.5.1.gz /boot/xen-4.5.1.gz dom0_mem=4096M xsave=1
    echo 'Loading Arch Linux pkg-linux-lqx kernel ...'
    module /boot/vmlinuz-linux-lqx /boot/vmlinuz-linux-lqx root=UUID=8ff8e885-026a-45be-b2c7-1d52296aeb01 rw  quiet console=tty0
    echo 'Loading Arch Linux pkg-linux-lqx kernel initramfs ...'
    module /boot/initramfs-linux-lqx.img
}


menuentry "Xen 4.5.1 / Arch Linux pkg-linux-lqx kernel (fallback initramfs)" --class xen --class arch-linux --class arch --class gnu-linux --class gnu --class os {
   
    if [ x$feature_all_video_module = xy ]; then
        insmod all_video
    fi
    set gfxpayload=keep
    insmod ext2
    if [ x$feature_platform_search_hint = xy ]; then
        search --no-floppy --fs-uuid  --set=root --hint-bios=hd1,msdos9 --hint-efi=hd1,msdos9 --hint-baremetal=ahci1,msdos9  8ff8e885-026a-45be-b2c7-1d52296aeb01
    else
        search --no-floppy --fs-uuid  --set=root 8ff8e885-026a-45be-b2c7-1d52296aeb01
    fi
    echo 'Loading Xen 4.5.1 ...'
    multiboot /boot/xen-4.5.1.gz /boot/xen-4.5.1.gz dom0_mem=4096M xsave=1
    echo 'Loading Arch Linux pkg-linux-lqx kernel ...'
    module /boot/vmlinuz-linux-lqx /boot/vmlinuz-linux-lqx root=UUID=8ff8e885-026a-45be-b2c7-1d52296aeb01 rw  quiet console=tty0
    echo 'Loading Arch Linux pkg-linux-lqx kernel fallback initramfs ...'
    module /boot/initramfs-linux-lqx-fallback.img
}


menuentry "Xen 4.5.1 / Arch Linux pkg-linux-zen kernel" --class xen --class arch-linux --class arch --class gnu-linux --class gnu --class os {
   
    if [ x$feature_all_video_module = xy ]; then
        insmod all_video
    fi
    set gfxpayload=keep
    insmod ext2
    if [ x$feature_platform_search_hint = xy ]; then
        search --no-floppy --fs-uuid  --set=root --hint-bios=hd1,msdos9 --hint-efi=hd1,msdos9 --hint-baremetal=ahci1,msdos9  8ff8e885-026a-45be-b2c7-1d52296aeb01
    else
        search --no-floppy --fs-uuid  --set=root 8ff8e885-026a-45be-b2c7-1d52296aeb01
    fi
    echo 'Loading Xen 4.5.1 ...'
    multiboot /boot/xen-4.5.1.gz /boot/xen-4.5.1.gz dom0_mem=4096M xsave=1
    echo 'Loading Arch Linux pkg-linux-zen kernel ...'
    module /boot/vmlinuz-linux-zen /boot/vmlinuz-linux-zen root=UUID=8ff8e885-026a-45be-b2c7-1d52296aeb01 rw  quiet console=tty0
    echo 'Loading Arch Linux pkg-linux-zen kernel initramfs ...'
    module /boot/initramfs-linux-zen.img
}


menuentry "Xen 4.5.1 / Arch Linux pkg-linux-zen kernel (fallback initramfs)" --class xen --class arch-linux --class arch --class gnu-linux --class gnu --class os {
   
    if [ x$feature_all_video_module = xy ]; then
        insmod all_video
    fi
    set gfxpayload=keep
    insmod ext2
    if [ x$feature_platform_search_hint = xy ]; then
        search --no-floppy --fs-uuid  --set=root --hint-bios=hd1,msdos9 --hint-efi=hd1,msdos9 --hint-baremetal=ahci1,msdos9  8ff8e885-026a-45be-b2c7-1d52296aeb01
    else
        search --no-floppy --fs-uuid  --set=root 8ff8e885-026a-45be-b2c7-1d52296aeb01
    fi
    echo 'Loading Xen 4.5.1 ...'
    multiboot /boot/xen-4.5.1.gz /boot/xen-4.5.1.gz dom0_mem=4096M xsave=1
    echo 'Loading Arch Linux pkg-linux-zen kernel ...'
    module /boot/vmlinuz-linux-zen /boot/vmlinuz-linux-zen root=UUID=8ff8e885-026a-45be-b2c7-1d52296aeb01 rw  quiet console=tty0
    echo 'Loading Arch Linux pkg-linux-zen kernel fallback initramfs ...'
    module /boot/initramfs-linux-zen-fallback.img
}

Kod Seç Genişlet

xen-init-dom0.service                      enabled
xen-qemu-dom0-disk-backend.service         disabled
xen-watchdog.service                       disabled
xenconsoled.service                        enabled
xendomains.service                         enabled
xenstored.service                          enabled

Nerede hata yapıyorum, bulamadım?

[neynefes]

Pardon @cokomoko istekte bulunmuş.

[heartsmagic]

Sistem nereye kadar gidiyor peki?
Bir de, grafik kartı sürücüleri sahipli sürücüler mi?

[cokomoko]

Göremiyorum ki siyah ekran geliyor, konsola da düşemiyorum, nvidia sahipli sürücüleri kullanıyorum.
Systemd servisleri açılmaya başlıyor tam xorg'a düşeceğim, siyah ekran geliyor.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 15 Kasım 2015 - 00:52:02
https://www.youtube.com/watch?v=jePyapeHpSI bu videodaki gibi açılmaya başlıyor tam xorg'a düşeceğim siyah ekran geliyor.

[heartsmagic]

Eğer denerim diyorsan Nvidia sürücülerini kaldırıp bir dene. 

[cokomoko]

yeniden kurulumda şöyle bir uyarı verdi, müsait bir zamanda onu deneyip geri bildirim yapacağım:

Kod Seç Genişlet

Note: If you are upgrading from one of the previous 4.2 xen builds, and are having issues
      with graphics card passthrough, the default device model used has changed and the
      newer model can sometimes have issues. To work around these issue, support for the
      old style qemu-xen-traditional device model has been enabled. To use, add (or change)
      the following line into the configuration file for the domain you want to use
      passthrough with:
         device_model_version = "qemu-xen-traditional"

      Also remember to rebuild your grub configuration if upgrading from a non-xen 4.5.0
      install.

      The xend daemon and the xm toolset have now been removed with the xen 4.5 release.

      This install is now using a new version of the 09_xen file, used when generating
      a new grub.cfg file. The new version inherits the default linux kernel command
      line settings; to use the old method, uncomment the 'XEN_LINUX_CMDLINE_OVERRIDE'
      option in /etc/xen/grub.conf and change the '0' to '1'



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 15 Kasım 2015 - 20:37:44
xen tanımlı kernelden açamadım ama virtmanager'den sanal makine oluşturmayı başardım, root olmadan virtmanager'i başlatmak için

Kod Seç Genişlet

virt-manager --connect qemu:///session demek lazımmış, gentoo ve fedora forumları sağolsun.
Biraz ekran görüntüsü gelsin, bu arada gerçekten uğraştığıma değdi, sistem kaynaklarını çok iyi kullanıyor, hatta kykwifi'ye bile Arch'tan daha iyi giriyor, dnsmasq kullanmamdan mı nedir, Arch kykwifi ile pek barışık değil 

[ata1]

Virtualisation Technology bunun içinde geçerli mi acaba ? yeniden denesem mi kurulumu 

http://libvirt.org/drvxen.html

[cokomoko]

Bilemiyorum denemek lazım.
Ama dikkatli ol.

[ata1]

daha önce openxen manager kurmuştum şimdi sanal makine yöneticisini kurdum ama ayarlarına henüz girmedim xen kurulumu yapılıyor hala
şu virt-manager ayarlarından biraz bahseder misin nasıl yaptın denemek isterim

[cokomoko]

Yukarıda verdiğim komutu bir kereliğine çevirdikten sonra:

[ata1]

 bağlı değil diyor ?

[cokomoko]

üstüne iki kez tıkladın mı bağlıyor, gif'i düzelttim.

[ata1]

özel bir ayarı var mı ben mi eksik yapıyorum yada gene aynı sorun mu 

[cokomoko]

O çıkan uyarı penceresini kapat, onla işimiz yok, qemu/kvm user session üzerine gelip ona tıkla bağlanacaktır.

[ata1]

Libvirt e bağlanılamıyor.

internal error: Cannot find suitable emulator for x86_64


diyor sanırım aynı sorun bios

[cokomoko]

O zaman üzgünüm eral demek ki, virtualization technology olması lazım, benim makine epey eski ama desteği var, gerçi ben de bilmiyordum böyle bir özelliği olduğunu ya da kullanmamıştım.40 yılda bir işe yaradı.

[ata1]

aslında sorun virtualbox kullanırken de hep mecburen 32 bit iso kuruyordum bu nedenle xen kurmayı denemiştim

[cokomoko]

Yani virtualbox'tan verim alamıyorsun öyle mi?
Ben daha verimli olduğundan kurdum gerçi xen hala hallolmadı ama o da başka zamana kaldı, biraz da kafa dağıtmak için uğraşıyorum.