15.10 acilis sorunu

[tthacktt]

Simdi iki adet sorunum var ve eminim ikiside ayni sebepten dolayi. Ben 14.04 yukseltmesi yaptigimdan beridir neredeyse hemen her yukseltmemde ve hatta sistemi komple kaldirip yeniden kurdugumda dahi surekli sorunlar yasamaya ve buyuk oranda sorunlarima cozum bulamadan yeniden sistem yukseltme yada kurma durumuna gitmek zorunda kaldim. Burada birkac arkadas gercekten ilgilendi ve cozum uretmeye calisildi sorunlarim icin ama maalesef cogunda cozum gelmeden sistem yenilendi. Neyse bunlari sitem olsun diye yazmadim sadece acaba gecmisten beri gelen sorunlarin bir baglantisi var midir diye bilgilendirmek adina yazdim. Simdi var olan iki sorunumdan birisi sistem cok cok cok gec aciliyor. Acilis ekrani gelmeden once bir hata ekrani geliyor ve

Kod Seç Genişlet

fsck from util-linux 2.26.2

Kod Seç Genişlet

/dev/sda1: clean, 237986/12214272
files, 5072464/?
uyarisi beliriyor.
Not: kodun sonunda bulunan ''?'' soru isareti, orada yazan rakamlari animsamadigim icin eklenmistir.

[betseg]

fsck, günlüklerin düzgün olduğunu denetlemek için ve başıboş inode olup olmadığını görmek için her açılışta kısa bir denetim yapar(mış). Bu yüzden o açılışta o yazıyı görüyorsun.

Ayrıca açılışın nerede zaman kaybettiğini görmek için 

Kod Seç Genişlet

systemd-analyze
systemd-analyze blameyapabilirsin.

[ata1]

prfilinizdeki 15 .10 doğrumudur eğer öyle ise açılış süresi ve nerede oyalandığı şu ile bakılır 15.10 systemd'e geçiş yapıldı

Kod Seç Genişlet

systemd-analyze
ve
systemd-analyze blame

[tthacktt]

evet 15.10 kullaniyorum verdiginiz komutlarin ciktisi

Kod Seç Genişlet

tthacktt@tthacktt:~$ systemd-analyze
Startup finished in 8.309s (kernel) + 3min 2.800s (userspace) = 3min 11.110s
tthacktt@tthacktt:~$ systemd-analyze blame
          9.748s NetworkManager-wait-online.service
          7.118s dev-sda1.device
          6.553s gpu-manager.service
          5.373s apparmor.service
          5.223s ModemManager.service
          4.990s accounts-daemon.service
          3.422s systemd-logind.service
          3.422s alsa-restore.service
          3.401s speech-dispatcher.service
          3.400s apport.service
          3.398s vboxdrv.service
          3.397s irqbalance.service
          3.388s NetworkManager.service
          3.387s avahi-daemon.service
          3.384s bluetooth.service
          1.975s plymouth-start.service
          1.791s grub-common.service
          1.753s systemd-timesyncd.service
          1.337s upower.service
          1.260s console-setup.service
          1.223s systemd-tmpfiles-setup-dev.service
          1.038s systemd-modules-load.service
           993ms systemd-journal-flush.service
lines 1-23


[ata1]

Kod Seç Genişlet

inxi -b

şu çıktılara da çıktılara bakabilir miyim

Kod Seç Genişlet

systemctl --state=failed

[tthacktt]

Kod Seç Genişlet

~$ inxi -b
'inxi' programı şu anda kurulu değil. Kurulumunu şunu yazarak yapabilirsiniz:
sudo apt-get install inxi

Kod Seç Genişlet

~$ systemctl --state=failed
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.


[ata1]

Kod Seç Genişlet

systemd-analyze plot > ~/systemd.svg

komutu /home/kullanıcı adı/ altında systemd.svg adlı bir görüntü oluşturacak onu buraya aktar bir de grafik olarak görelim

[tthacktt]

dosya desteklenmiyordu farkli kaydet ile png yaptim o zaman da dosya boyutu buyuk dedi. Nasil yollayabilirim?

[ata1]

http://postimage.org/index.php?um=computer
bu sitede resim boyutlandır var 600x800 ile deneyin. ayrıca direk bile yükledim demin .bir deneyin lütfen

[tthacktt]

bmp resim yükle

http://s8.postimg.org/fq8dviymd/systemd.png

[betseg]

Maalesef yazılar hiç görünmüyor. SVG'yi (SVG olarak) başka bir yere yükleme şansınız var mı? Örneğin 

Kod Seç Genişlet

systemd-analyze plot | curl -F 'f:1=<-' ix.io
kullanabilirsiniz, ama sorunun pek systemd ile alakası olduğunu düşünmüyorum. Başka bir şey olabilir diye düşünüyorum.

[heartsmagic]

https://forum.ubuntu-tr.net/index.php?topic=49036.25

[tthacktt]

Maalesef yazılar hiç görünmüyor. SVG'yi (SVG olarak) başka bir yere yükleme şansınız var mı? Örneğin

Kod Seç Genişlet

systemd-analyze plot | curl -F 'f:1=<-' ix.io
kullanabilirsiniz, ama sorunun pek systemd ile alakası olduğunu düşünmüyorum. Başka bir şey olabilir diye düşünüyorum.

Bu siteye yukledim http://imgh.us/systemd_3.svg


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 07 Kasım 2015 - 11:36:17

https://forum.ubuntu-tr.net/index.php?topic=49036.25

bu sayfada olan sorunda zaten benim sorunum. Konunun en basinda da dedigim gibi. 14.04 den beridir sure gelen bir sorunum var ve her yeni sistemde de devam ediyor bu sorun. 

[heartsmagic]

Senin sorunun olduğunu biliyorum, o nedenle verdim bağlantıyı zaten. Hem ikinci konuyu açmışsın hem de oradaki son soruma cevap vermemişsin

[tthacktt]

Orada sorunuza cevap vermedim evet cunku zaten tarihlere bakarsaniz uzun bir sure o sorunu cozmek icin ugrastim ve en sonunda 15.10 yukseltmesi gelince de direk yukselttim. Yani orada var olan sorun ile suan da olan aynimidir bilemem ama ben ayni sorun oldugunu dusunmedigim icin oradan devam etmedim aslinda isin gercegi sistem degistikten sonra o sorunu animsamiyordum. Sorun tekrar gelince ''evet eskiden de sorunum vardi'' diye animsadim. Buradan devam etme sebebim 15.10 oldugu icin ve farkli bir hata mesaji aldigim icin. Yani simdi nasil izah ederim ve beni dogru anlarsin bilmiyorum ama benim garip br hafiza sorunum var. Herhangi birseyi en ince detayina kadar animsaya bilen bir hafizam arken bazi durumlarda hic sebepsiz degil ayrintiyi ana konuyu dahi unutabiliyorum, bir nevi Jamais Vu durumu yani.

[heartsmagic]

Bu başlığın ilk iletisinde yine sistemin geç açıldığından bahsetmişsin. Haliyle ben yine senden diğer konudaki çıktıları isteyeceğim. Sonuç olarak oradan devam edilse de olabilirmiş
Başa sardık yine, ancak incelenmesini istiyorsan oradaki çıktılar lazım.

[tthacktt]

Hangi ciktilari istiyorsunuz bilmiyorum ama oeadan istediginiz bir cikti

Her komutu anlaman mümkün değil elbette, ben de anlamıyorum hepsini Sadece temel meseleleri biraz daha öğren ki, bazı hataları yorumlayabilesin.

Kod Seç Genişlet

sudo sed -i 's/$syslog.service/syslog.service/' /lib/systemd/system/vboxdrv.service
grep syslog.service /lib/systemd/system/vboxdrv.service


komutlarını uygulayıp çıktıları buraya geç. İlk komut çıktı vermez, sadece uyguladığından emin olalım.
İkinci komutun da şöyle bir çıktı vermesi lazım:

After=syslog.service

Sonra sistemi yeniden başlatıp denersin.

demistiniz ama

Kod Seç Genişlet

tthacktt@tthacktt:~$ sudo sed -i 's/$syslog.service/syslog.service/' /lib/systemd/system/vboxdrv.service
[sudo] password for tthacktt:
tthacktt@tthacktt:~$ grep syslog.service /lib/systemd/system/vboxdrv.service
tthacktt@tthacktt:~$



dediginiz sonucu vermedi.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 10 Kasım 2015 - 15:59:22

Kod Seç Genişlet

dmesg > dmesg_dosya

Kod Seç Genişlet

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.0-16-generic (buildd@lgw01-22) (gcc version 5.2.1 20151003 (Ubuntu 5.2.1-21ubuntu2) ) #19-Ubuntu SMP Thu Oct 8 14:46:51 UTC 2015 (Ubuntu 4.2.0-16.19-generic 4.2.3)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf63efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf63f000-0x00000000bf6befff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf6bf000-0x00000000bf7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf7bf000-0x00000000bf7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013f7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Sony Corporation VPCEH38FH/VAIO, BIOS R0190Z9 11/17/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13f800 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   4 base 100000000 mask FC0000000 write-back
[    0.000000]   5 base 13F800000 mask FFF800000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
[    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[    0.000000]  [mem 0x37800000-0x379fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20000000-0x377fffff]
[    0.000000]  [mem 0x20000000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] BRK [0x01cdc000, 0x01cdcfff] PGTABLE
[    0.000000] BRK [0x01cdd000, 0x01cddfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3421a000-0x36104fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 Sony  )
[    0.000000] ACPI: XSDT 0x00000000BF7FE120 000084 (v01 Sony   VAIO     20111117      01000013)
[    0.000000] ACPI: FACP 0x00000000BF7FC000 0000F4 (v04 Sony   VAIO     20111117 INTL 20061109)
[    0.000000] ACPI: DSDT 0x00000000BF7F1000 007907 (v01 Sony   VAIO     20111117 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000BF76E000 000040
[    0.000000] ACPI: FACS 0x00000000BF76E000 000040
[    0.000000] ACPI: ASF! 0x00000000BF7FD000 0000A5 (v32 Sony   VAIO     20111117 INTL 20061109)
[    0.000000] ACPI: HPET 0x00000000BF7FB000 000038 (v01 Sony   VAIO     20111117 INTL 20061109)
[    0.000000] ACPI: APIC 0x00000000BF7FA000 00008C (v02 Sony   VAIO     20111117 INTL 20061109)
[    0.000000] ACPI: MCFG 0x00000000BF7F9000 00003C (v01 Sony   VAIO     20111117 INTL 20061109)
[    0.000000] ACPI: SLIC 0x00000000BF7F0000 000176 (v01 Sony   VAIO     20111117 INTL 20061109)
[    0.000000] ACPI: WDAT 0x00000000BF7EF000 000224 (v01 Sony   VAIO     20111117 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000BF7ED000 001068 (v01 Sony   VAIO     20111117 INTL 20061109)
[    0.000000] ACPI: BOOT 0x00000000BF7EB000 000028 (v01 Sony   VAIO     20111117 INTL 20061109)
[    0.000000] ACPI: ASPT 0x00000000BF7E8000 000034 (v07 Sony   VAIO     20111117 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000BF7E7000 0007C2 (v01 Sony   VAIO     20111117 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000BF7E6000 000996 (v01 Sony   VAIO     20111117 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 4220MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x0000000037bfdfff]
[    0.000000]   HighMem  [mem 0x0000000037bfe000-0x000000013f7fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bf63efff]
[    0.000000]   node   0: [mem 0x00000000bf7ff000-0x00000000bf7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013f7fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013f7fffff]
[    0.000000] On node 0 totalpages: 1043932
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   Normal zone: 2190 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 815682 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 19 pages/cpu @f623f000 s47116 r0 d30708 u77824
[    0.000000] pcpu-alloc: s47116 r0 d30708 u77824 alloc=19*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1041702
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-16-generic root=UUID=dc980b9c-97ed-451d-88b5-32f78f3808b8 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:0013f800)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 4088296K/4175728K available (7574K kernel code, 738K rwdata, 3020K rodata, 928K init, 796K bss, 87432K reserved, 0K cma-reserved, 3262728K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
                   pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                   vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                     .init : 0xc1b14000 - 0xc1bfc000   ( 928 kB)
                     .data : 0xc1765bf0 - 0xc1b12a40   (3763 kB)
                     .text : 0xc1000000 - 0xc1765bf0   (7574 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:2304 nr_irqs:488 16
[    0.000000] CPU 0 irqstacks, hard=f2c3a000 soft=f2c3c000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2494.214 MHz processor
[    0.000033] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.42 BogoMIPS (lpj=9976856)
[    0.000036] pid_max: default: 32768 minimum: 301
[    0.000040] ACPI: Core revision 20150619
[    0.006311] ACPI: All ACPI Tables successfully acquired
[    0.006325] Security Framework initialized
[    0.006335] AppArmor: AppArmor initialized
[    0.006336] Yama: becoming mindful.
[    0.006369] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.006371] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.006534] Initializing cgroup subsys blkio
[    0.006537] Initializing cgroup subsys memory
[    0.006543] Initializing cgroup subsys devices
[    0.006546] Initializing cgroup subsys freezer
[    0.006548] Initializing cgroup subsys net_cls
[    0.006550] Initializing cgroup subsys perf_event
[    0.006552] Initializing cgroup subsys net_prio
[    0.006554] Initializing cgroup subsys hugetlb
[    0.006574] CPU: Physical Processor ID: 0
[    0.006575] CPU: Processor Core ID: 0
[    0.006579] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.006580] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.006583] mce: CPU supports 7 MCE banks
[    0.006591] CPU0: Thermal monitoring handled by SMI
[    0.006598] process: using mwait in idle threads
[    0.006603] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.006604] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.007118] Freeing SMP alternatives memory: 28K (c1bfc000 - c1c03000)
[    0.020902] ftrace: allocating 30215 entries in 60 pages
[    0.034824] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.035241] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.074973] TSC deadline timer enabled
[    0.074977] smpboot: CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07)
[    0.075002] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.075023] ... version:                3
[    0.075023] ... bit width:              48
[    0.075024] ... generic registers:      4
[    0.075025] ... value mask:             0000ffffffffffff
[    0.075027] ... max period:             0000ffffffffffff
[    0.075027] ... fixed-purpose events:   3
[    0.075028] ... event mask:             000000070000000f
[    0.075833] CPU 1 irqstacks, hard=f2d94000 soft=f2d96000
[    0.075834] x86: Booting SMP configuration:
[    0.075835] .... node  #0, CPUs:      #1
[    0.076838] Initializing CPU#1
[    0.076869] CPU1: Thermal monitoring handled by SMI
[    0.079075] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.079160] CPU 2 irqstacks, hard=f2eec000 soft=f2eee000
[    0.079162]  #2
[    0.080266] microcode: CPU2 microcode updated early to revision 0x29, date = 2013-06-12
[    0.080268] Initializing CPU#2
[    0.080295] CPU2: Thermal monitoring handled by SMI
[    0.082462] CPU 3 irqstacks, hard=f2f50000 soft=f2f52000
[    0.082465]  #3
[    0.083566] Initializing CPU#3
[    0.083593] CPU3: Thermal monitoring handled by SMI
[    0.085695] x86: Booted up 1 node, 4 CPUs
[    0.085698] smpboot: Total of 4 processors activated (19953.71 BogoMIPS)
[    0.088902] devtmpfs: initialized
[    0.089226] evm: security.selinux
[    0.089228] evm: security.SMACK64
[    0.089228] evm: security.SMACK64EXEC
[    0.089229] evm: security.SMACK64TRANSMUTE
[    0.089230] evm: security.SMACK64MMAP
[    0.089231] evm: security.ima
[    0.089232] evm: security.capability
[    0.089311] PM: Registering ACPI NVS region [mem 0xbf6bf000-0xbf7befff] (1048576 bytes)
[    0.089427] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.089501] pinctrl core: initialized pinctrl subsystem
[    0.089620] RTC time:  3:05:44, date: 11/10/15
[    0.089731] NET: Registered protocol family 16
[    0.089922] EISA bus registered
[    0.100740] cpuidle: using governor ladder
[    0.112743] cpuidle: using governor menu
[    0.112897] Simple Boot Flag at 0x44 set to 0x1
[    0.112949] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.112950] ACPI: bus type PCI registered
[    0.112952] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.113040] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.113043] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.113044] PCI: Using MMCONFIG for extended config space
[    0.113045] PCI: Using configuration type 1 for base access
[    0.113202] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.113206] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.113207] mtrr: probably your BIOS does not setup all CPUs.
[    0.113208] mtrr: corrected configuration.
[    0.129215] ACPI: Added _OSI(Module Device)
[    0.129217] ACPI: Added _OSI(Processor Device)
[    0.129218] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.129219] ACPI: Added _OSI(Processor Aggregator Device)
[    0.131145] ACPI: Executed 1 blocks of module-level executable AML code
[    0.133165] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.133511] ACPI: Dynamic OEM Table Load:
[    0.133519] ACPI: SSDT 0x00000000F2C12800 00067C (v01 PmRef  Cpu0Cst  00003001 INTL 20100121)
[    0.133987] ACPI: Dynamic OEM Table Load:
[    0.133992] ACPI: SSDT 0x00000000F2C87C00 000303 (v01 PmRef  ApIst    00003000 INTL 20100121)
[    0.134391] ACPI: Dynamic OEM Table Load:
[    0.134396] ACPI: SSDT 0x00000000F2FB6200 000119 (v01 PmRef  ApCst    00003000 INTL 20100121)
[    0.135115] ACPI : EC: EC started
[    0.135168] ACPI: Interpreter enabled
[    0.135180] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[    0.135184] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[    0.135197] ACPI: (supports S0 S3 S4 S5)
[    0.135198] ACPI: Using IOAPIC for interrupt routing
[    0.135226] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.139990] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.139995] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.140028] \_SB_.PCI0:_OSC invalid UUID
[    0.140029] _OSC request data:1 1f 0
[    0.140033] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.140426] PCI host bridge to bus 0000:00
[    0.140429] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.140431] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.140432] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.140434] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.140436] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window]
[    0.140443] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.140526] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.140556] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.140678] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.140727] pci 0000:00:16.0: reg 0x10: [mem 0xd5304000-0xd530400f 64bit]
[    0.140821] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.140917] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.141353] pci 0000:00:1a.0: reg 0x10: [mem 0xd5309000-0xd53093ff]
[    0.143661] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.143715] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.143769] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.143817] pci 0000:00:1b.0: reg 0x10: [mem 0xd5300000-0xd5303fff 64bit]
[    0.143919] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.144006] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.144137] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.144178] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.144231] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.144348] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.144390] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.144439] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[    0.144552] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.144592] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.144643] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.145060] pci 0000:00:1d.0: reg 0x10: [mem 0xd5308000-0xd53083ff]
[    0.147387] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.147441] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.147488] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.147696] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.147741] pci 0000:00:1f.2: reg 0x10: [io  0x5048-0x504f]
[    0.147754] pci 0000:00:1f.2: reg 0x14: [io  0x5054-0x5057]
[    0.147767] pci 0000:00:1f.2: reg 0x18: [io  0x5040-0x5047]
[    0.147780] pci 0000:00:1f.2: reg 0x1c: [io  0x5050-0x5053]
[    0.147794] pci 0000:00:1f.2: reg 0x20: [io  0x5020-0x503f]
[    0.147807] pci 0000:00:1f.2: reg 0x24: [mem 0xd5307000-0xd53077ff]
[    0.147855] pci 0000:00:1f.2: PME# supported from D3hot
[    0.147930] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.147959] pci 0000:00:1f.3: reg 0x10: [mem 0xd5305000-0xd53050ff 64bit]
[    0.147994] pci 0000:00:1f.3: reg 0x20: [io  0x5000-0x501f]
[    0.148139] pci 0000:01:00.0: [10de:1055] type 00 class 0x030000
[    0.148168] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[    0.148181] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.148195] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.148205] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.148214] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.148319] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
[    0.148346] pci 0000:01:00.1: reg 0x10: [mem 0xd3000000-0xd3003fff]
[    0.152926] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.152934] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.152941] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd30fffff]
[    0.152951] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.153084] pci 0000:07:00.0: [168c:002b] type 00 class 0x028000
[    0.153174] pci 0000:07:00.0: reg 0x10: [mem 0xd5200000-0xd520ffff 64bit]
[    0.153391] pci 0000:07:00.0: supports D1
[    0.153393] pci 0000:07:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.153443] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.160945] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.160961] pci 0000:00:1c.0:   bridge window [mem 0xd5200000-0xd52fffff]
[    0.161138] pci 0000:0d:00.0: [10ec:5209] type 00 class 0xff0000
[    0.161285] pci 0000:0d:00.0: reg 0x10: [mem 0xd4200000-0xd4200fff]
[    0.161706] pci 0000:0d:00.0: supports D1 D2
[    0.161707] pci 0000:0d:00.0: PME# supported from D1 D2 D3hot
[    0.161773] pci 0000:0d:00.0: System wakeup disabled by ACPI
[    0.169002] pci 0000:00:1c.3: PCI bridge to [bus 0d-12]
[    0.169013] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.169027] pci 0000:00:1c.3:   bridge window [mem 0xd4200000-0xd51fffff]
[    0.169036] pci 0000:00:1c.3:   bridge window [mem 0xd3100000-0xd40fffff 64bit pref]
[    0.169200] pci 0000:13:00.0: [10ec:8168] type 00 class 0x020000
[    0.169386] pci 0000:13:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.169514] pci 0000:13:00.0: reg 0x18: [mem 0xd4104000-0xd4104fff 64bit pref]
[    0.169593] pci 0000:13:00.0: reg 0x20: [mem 0xd4100000-0xd4103fff 64bit pref]
[    0.169859] pci 0000:13:00.0: supports D1 D2
[    0.169860] pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.169957] pci 0000:13:00.0: System wakeup disabled by ACPI
[    0.177002] pci 0000:00:1c.5: PCI bridge to [bus 13]
[    0.177013] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.177031] pci 0000:00:1c.5:   bridge window [mem 0xd4100000-0xd41fffff 64bit pref]
[    0.177105] pci_bus 0000:00: on NUMA node 0
[    0.177490] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.177544] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.177594] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.177644] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.177694] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.177744] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.177794] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.177844] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.178249] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.178275] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.178373] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.178375] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.178377] vgaarb: loaded
[    0.178378] vgaarb: bridge control possible 0000:01:00.0
[    0.179231] SCSI subsystem initialized
[    0.179266] libata version 3.00 loaded.
[    0.179296] ACPI: bus type USB registered
[    0.179316] usbcore: registered new interface driver usbfs
[    0.179326] usbcore: registered new interface driver hub
[    0.179343] usbcore: registered new device driver usb
[    0.179502] PCI: Using ACPI for IRQ routing
[    0.192989] PCI: pci_cache_line_size set to 64 bytes
[    0.193071] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.193073] e820: reserve RAM buffer [mem 0xbf63f000-0xbfffffff]
[    0.193074] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[    0.193076] e820: reserve RAM buffer [mem 0x13f800000-0x13fffffff]
[    0.193196] NetLabel: Initializing
[    0.193197] NetLabel:  domain hash size = 128
[    0.193198] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.193209] NetLabel:  unlabeled traffic allowed by default
[    0.193315] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.193320] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.195349] clocksource: Switched to clocksource hpet
[    0.202138] AppArmor: AppArmor Filesystem Enabled
[    0.202210] pnp: PnP ACPI init
[    0.202337] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.202340] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.202342] system 00:00: [io  0x1010-0x1013] has been reserved
[    0.202344] system 00:00: [io  0xffff] has been reserved
[    0.202346] system 00:00: [io  0x0400-0x0453] could not be reserved
[    0.202348] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.202350] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.202352] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.202355] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.202386] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.202429] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.202432] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.202462] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.202492] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.202619] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.202622] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.202624] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.202626] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.202628] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.202630] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.202631] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.202633] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.202635] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.202637] system 00:05: [mem 0xd5400000-0xd5400fff] has been reserved
[    0.202640] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.203058] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
[    0.203060] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved
[    0.203063] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.203076] pnp: PnP ACPI: found 7 devices
[    0.203080] PnPBIOS: Disabled by ACPI PNP
[    0.239791] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.239799] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.239844] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
[    0.239846] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.239849] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.239852] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd30fffff]
[    0.239854] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.239858] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.239864] pci 0000:00:1c.0:   bridge window [mem 0xd5200000-0xd52fffff]
[    0.239876] pci 0000:00:1c.3: PCI bridge to [bus 0d-12]
[    0.239880] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.239886] pci 0000:00:1c.3:   bridge window [mem 0xd4200000-0xd51fffff]
[    0.239891] pci 0000:00:1c.3:   bridge window [mem 0xd3100000-0xd40fffff 64bit pref]
[    0.239900] pci 0000:00:1c.5: PCI bridge to [bus 13]
[    0.239903] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.239913] pci 0000:00:1c.5:   bridge window [mem 0xd4100000-0xd41fffff 64bit pref]
[    0.239922] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.239924] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.239926] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.239927] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff window]
[    0.239929] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.239931] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
[    0.239933] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.239935] pci_bus 0000:07: resource 1 [mem 0xd5200000-0xd52fffff]
[    0.239936] pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
[    0.239938] pci_bus 0000:0d: resource 1 [mem 0xd4200000-0xd51fffff]
[    0.239940] pci_bus 0000:0d: resource 2 [mem 0xd3100000-0xd40fffff 64bit pref]
[    0.239941] pci_bus 0000:13: resource 0 [io  0x2000-0x2fff]
[    0.239943] pci_bus 0000:13: resource 2 [mem 0xd4100000-0xd41fffff 64bit pref]
[    0.239971] NET: Registered protocol family 2
[    0.240113] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.240123] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.240138] TCP: Hash tables configured (established 8192 bind 8192)
[    0.240152] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.240156] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.240205] NET: Registered protocol family 1
[    0.271615] pci 0000:01:00.0: Video device with shadowed ROM
[    0.271644] PCI: CLS 64 bytes, default 64
[    0.271693] Trying to unpack rootfs image as initramfs...
[    0.822278] Freeing initrd memory: 31660K (f421a000 - f6105000)
[    0.822402] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.822403] hw unit of domain pp0-core 2^-16 Joules
[    0.822404] hw unit of domain package 2^-16 Joules
[    0.822405] hw unit of domain pp1-gpu 2^-16 Joules
[    0.822463] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[    0.822472] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[    0.822481] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[    0.822494] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[    0.822549] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.822638] Scanning for low memory corruption every 60 seconds
[    0.823026] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.823063] Initialise system trusted keyring
[    0.823087] audit: initializing netlink subsys (disabled)
[    0.823100] audit: type=2000 audit(1447124744.808:1): initialized
[    0.823408] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.825170] zpool: loaded
[    0.825172] zbud: loaded
[    0.825246] VFS: Disk quotas dquot_6.6.0
[    0.825286] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.825763] fuse init (API version 7.23)
[    0.825922] Key type big_key registered
[    0.826235] Key type asymmetric registered
[    0.826238] Asymmetric key parser 'x509' registered
[    0.826253] bounce: pool size: 64 pages
[    0.826288] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.826328] io scheduler noop registered
[    0.826331] io scheduler deadline registered (default)
[    0.826363] io scheduler cfq registered
[    0.826996] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.827004] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.827046] intel_idle: MWAIT substates: 0x21120
[    0.827047] intel_idle: v0.4 model 0x2A
[    0.827048] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.827289] ACPI: AC Adapter [AC] (on-line)
[    0.827349] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.827352] ACPI: Power Button [PWRB]
[    0.827395] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.827407] ACPI: Lid Switch [LID0]
[    0.827447] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.827449] ACPI: Power Button [PWRF]
[    0.828729] thermal LNXTHERM:00: registered as thermal_zone0
[    0.828731] ACPI: Thermal Zone [THRM] (48 C)
[    0.828760] GHES: HEST is not enabled!
[    0.828827] isapnp: Scanning for PnP cards...
[    0.828947] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.830766] Linux agpgart interface v0.103
[    0.833170] brd: module loaded
[    0.834148] loop: module loaded
[    0.834372] libphy: Fixed MDIO Bus: probed
[    0.834375] tun: Universal TUN/TAP device driver, 1.6
[    0.834376] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.834418] PPP generic driver version 2.4.2
[    0.834488] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.834492] ehci-pci: EHCI PCI platform driver
[    0.834599] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.834606] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.834621] ehci-pci 0000:00:1a.0: debug port 2
[    0.838531] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.838543] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd5309000
[    0.848117] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.848166] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.848167] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.848169] usb usb1: Product: EHCI Host Controller
[    0.848171] usb usb1: Manufacturer: Linux 4.2.0-16-generic ehci_hcd
[    0.848172] usb usb1: SerialNumber: 0000:00:1a.0
[    0.848338] hub 1-0:1.0: USB hub found
[    0.848346] hub 1-0:1.0: 2 ports detected
[    0.848554] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.848559] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.848573] ehci-pci 0000:00:1d.0: debug port 2
[    0.852529] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.852567] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd5308000
[    0.864138] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.864196] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.864198] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.864201] usb usb2: Product: EHCI Host Controller
[    0.864203] usb usb2: Manufacturer: Linux 4.2.0-16-generic ehci_hcd
[    0.864206] usb usb2: SerialNumber: 0000:00:1d.0
[    0.864329] hub 2-0:1.0: USB hub found
[    0.864335] hub 2-0:1.0: 2 ports detected
[    0.864457] ehci-platform: EHCI generic platform driver
[    0.864467] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.864471] ohci-pci: OHCI PCI platform driver
[    0.864483] ohci-platform: OHCI generic platform driver
[    0.864491] uhci_hcd: USB Universal Host Controller Interface driver
[    0.864547] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.876911] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.876916] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.877080] mousedev: PS/2 mouse device common for all mice
[    0.877344] rtc_cmos 00:01: RTC can wake from S4
[    0.877499] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.877530] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.877540] i2c /dev entries driver
[    0.877598] device-mapper: uevent: version 1.0.3
[    0.877667] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[    0.877690] platform eisa.0: Probing EISA bus 0
[    0.877692] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.877694] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.877695] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.877697] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.877698] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.877700] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.877701] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.877703] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.877704] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.877706] platform eisa.0: EISA: Detected 0 cards
[    0.877725] cpufreq-nforce2: No nForce2 chipset.
[    0.877730] Intel P-state driver initializing.
[    0.877867] ledtrig-cpu: registered to indicate activity on CPUs
[    0.877908] PCCT header not found.
[    0.878616] NET: Registered protocol family 10
[    0.879280] NET: Registered protocol family 17
[    0.879318] Key type dns_resolver registered
[    0.879995] Using IPI No-Shortcut mode
[    0.880753] Loading compiled-in X.509 certificates
[    0.886213] Loaded X.509 cert 'Build time autogenerated kernel key: 9a18469980b5ebdd28885474f95f179ffebbdfd7'
[    0.886226] registered taskstats version 1
[    0.886244] zswap: loading zswap
[    0.886246] zswap: using zbud pool
[    0.886250] zswap: using lzo compressor
[    0.888274] Key type trusted registered
[    0.892095] Key type encrypted registered
[    0.892100] AppArmor: AppArmor sha1 policy hashing enabled
[    0.892102] ima: No TPM chip found, activating TPM-bypass!
[    0.892119] evm: HMAC attrs: 0x1
[    0.892521]   Magic number: 7:609:57
[    0.892605] rtc_cmos 00:01: setting system clock to 2015-11-10 03:05:45 UTC (1447124745)
[    0.892666] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.892667] EDD information not available.
[    0.892736] PM: Hibernation image not present or could not be loaded.
[    0.933072] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.014000] ACPI: Battery Slot [BAT0] (battery present)
[    1.160475] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.176491] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.183200] isapnp: No Plug & Play device found
[    1.183389] Freeing unused kernel memory: 928K (c1b14000 - c1bfc000)
[    1.183442] Write protecting the kernel text: 7576k
[    1.183467] Write protecting the kernel read-only data: 3024k
[    1.183468] NX-protecting the kernel data: 4712k
[    1.193218] random: systemd-udevd urandom read with 9 bits of entropy available
[    1.222470] ACPI: Video Device [DGPU] (multi-head: yes  rom: no  post: no)
[    1.238263] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.238272] r8169 0000:13:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.239312] ahci 0000:00:1f.2: version 3.0
[    1.293004] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.293007] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.293272] hub 1-1:1.0: USB hub found
[    1.293350] hub 1-1:1.0: 6 ports detected
[    1.349975] rtsx_pci 0000:0d:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 25
[    1.350164] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x9 impl SATA mode
[    1.350167] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[    1.350460] r8169 0000:13:00.0 eth0: RTL8168e/8111e at 0xf8448000, 78:84:3c:ff:70:a1, XID 0c200000 IRQ 27
[    1.350464] r8169 0000:13:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.361802] scsi host0: ahci
[    1.361929] scsi host1: ahci
[    1.362038] scsi host2: ahci
[    1.362299] scsi host3: ahci
[    1.362630] scsi host4: ahci
[    1.362749] scsi host5: ahci
[    1.362812] ata1: SATA max UDMA/133 abar m2048@0xd5307000 port 0xd5307100 irq 26
[    1.362814] ata2: DUMMY
[    1.362816] ata3: DUMMY
[    1.362819] ata4: SATA max UDMA/133 abar m2048@0xd5307000 port 0xd5307280 irq 26
[    1.362820] ata5: DUMMY
[    1.362821] ata6: DUMMY
[    1.475555] acpi device:22: registered as cooling_device4
[    1.475624] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input6
[    1.476068] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.476071] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.476233] hub 2-1:1.0: USB hub found
[    1.476313] hub 2-1:1.0: 6 ports detected
[    1.681175] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.681225] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.682330] ata1.00: ATA-8: ST9320423AS, 0006HPM1, max UDMA/100
[    1.682340] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.683074] ata4.00: ATAPI: MATSHITADVD-RAM UJ8B0, 1.00, max UDMA/100
[    1.683583] ata1.00: configured for UDMA/100
[    1.683791] scsi 0:0:0:0: Direct-Access     ATA      ST9320423AS      HPM1 PQ: 0 ANSI: 5
[    1.684021] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.684054] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.684081] sd 0:0:0:0: [sda] Write Protect is off
[    1.684085] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.684111] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.685363] ata4.00: configured for UDMA/100
[    1.687503] scsi 3:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8B0    1.00 PQ: 0 ANSI: 5
[    1.702774] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.702784] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.702990] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.703160] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    1.745248] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[    1.749239] usb 2-1.2: new low-speed USB device number 3 using ehci-pci
[    1.752828]  sda: sda1 sda2
[    1.753302] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.821293] tsc: Refined TSC clocksource calibration: 2494.334 MHz
[    1.821305] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45126d86, max_idle_ns: 440795256522 ns
[    1.845283] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[    1.845294] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.845300] usb 2-1.2: Product:  USB OPTICAL MOUSE
[    1.851982] hidraw: raw HID events driver (C) Jiri Kosina
[    1.858082] usbcore: registered new interface driver usbhid
[    1.858084] usbhid: USB HID core driver
[    1.861282] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0001/input/input7
[    1.861398] hid-generic 0003:0000:0538.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[    1.889857] usb 1-1.2: New USB device found, idVendor=04f2, idProduct=b28a
[    1.889868] usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    1.889873] usb 1-1.2: Product: Sony Visual Communication Camera
[    1.889879] usb 1-1.2: Manufacturer: Chicony Electronics Co., Ltd.
[    1.889883] usb 1-1.2: SerialNumber: Sony Visual Communication Camera
[    1.965494] usb 1-1.5: new full-speed USB device number 4 using ehci-pci
[    2.058723] usb 1-1.5: New USB device found, idVendor=0489, idProduct=e027
[    2.058733] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.465738] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input8
[    2.479513] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.822443] clocksource: Switched to clocksource tsc
[    7.653076] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    8.284498] random: nonblocking pool is initialized
[    8.837842] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[    9.032624] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    9.032756] systemd[1]: Detected architecture x86.
[    9.040254] systemd[1]: Set hostname to <tthacktt>.
[   10.725554] systemd[1]: Reached target Encrypted Volumes.
[   10.725613] systemd[1]: Reached target User and Group Name Lookups.
[   10.725642] systemd[1]: Created slice Root Slice.
[   10.725727] systemd[1]: Listening on Journal Audit Socket.
[   10.725806] systemd[1]: Created slice System Slice.
[   10.725879] systemd[1]: Created slice system-getty.slice.
[   10.725929] systemd[1]: Listening on Journal Socket.
[   10.726412] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   10.726943] systemd[1]: Mounting Huge Pages File System...
[   10.727614] systemd[1]: Starting Setup Virtual Console...
[   10.727651] systemd[1]: Listening on fsck to fsckd communication Socket.
[   10.727688] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   10.727766] systemd[1]: Created slice User and Session Slice.
[   10.727786] systemd[1]: Reached target Slices.
[   10.728289] systemd[1]: Started Braille Device Support.
[   10.728470] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.728978] systemd[1]: Mounting Debug File System...
[   10.729503] systemd[1]: Starting Uncomplicated firewall...
[   10.947553] systemd[1]: Starting Load Kernel Modules...
[   10.947605] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   10.948181] systemd[1]: Starting Increase datagram queue length...
[   10.948249] systemd[1]: Listening on udev Kernel Socket.
[   10.948954] systemd[1]: Mounting POSIX Message Queue File System...
[   10.949004] systemd[1]: Listening on udev Control Socket.
[   10.949512] systemd[1]: Starting udev Coldplug all Devices...
[   10.949659] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   11.202093] systemd[1]: Reached target Remote File Systems (Pre).
[   11.202152] systemd[1]: Listening on Journal Socket (/dev/log).
[   11.202658] systemd[1]: Started Read required files in advance.
[   11.203575] systemd[1]: Mounted Debug File System.
[   11.203598] systemd[1]: Mounted Huge Pages File System.
[   11.203613] systemd[1]: Mounted POSIX Message Queue File System.
[   11.203783] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   11.204018] systemd[1]: Started Setup Virtual Console.
[   11.204225] systemd[1]: Started Uncomplicated firewall.
[   11.204380] systemd[1]: Started Increase datagram queue length.
[   11.216284] systemd[1]: Listening on Syslog Socket.
[   11.216754] systemd[1]: Starting Journal Service...
[   11.217341] systemd[1]: Starting Create Static Device Nodes in /dev...
[   11.289260] lp: driver loaded but no devices found
[   11.343396] systemd[1]: Started udev Coldplug all Devices.
[   11.360421] ppdev: user-space parallel port driver
[   11.546114] systemd[1]: Started Load Kernel Modules.
[   11.546814] systemd[1]: Mounting FUSE Control File System...
[   11.547364] systemd[1]: Starting Apply Kernel Variables...
[   11.550100] systemd[1]: Mounted FUSE Control File System.
[   11.706864] systemd[1]: Started Journal Service.
[   13.516424] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   13.966337] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150619/utaddress-254)
[   13.966344] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.966347] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[   13.966350] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.966351] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[   13.966353] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.966354] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[   13.966357] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.966358] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   14.091615] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input9
[   14.091701] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input10
[   14.143428] sony_laptop: SNC setup done.
[   14.152637] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.397168] systemd-journald[245]: Received request to flush runtime journal from PID 1
[   15.064623] [drm] Initialized drm 1.1.0 20060810
[   15.990365] snd_hda_intel 0000:01:00.1: Disabling MSI
[   15.990372] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   16.128027] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[   16.128567] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[   16.128570] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.128572] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[   16.128573] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[   16.128574] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[   16.128576] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[   16.128578] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1b
[   16.129655] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[   16.132275] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   16.132342] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   16.325455] nvidia: module license 'NVIDIA' taints kernel.
[   16.325458] Disabling lock debugging due to kernel taint
[   16.329059] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[   16.332787] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   16.333040] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[   16.333044] NVRM: loading NVIDIA UNIX x86 Kernel Module  352.41  Fri Aug 21 22:11:31 PDT 2015
[   16.474113] intel_rapl: Found RAPL domain package
[   16.474117] intel_rapl: Found RAPL domain core
[   16.593455] Bluetooth: Core ver 2.20
[   16.593471] NET: Registered protocol family 31
[   16.593473] Bluetooth: HCI device and connection manager initialized
[   16.593477] Bluetooth: HCI socket layer initialized
[   16.593480] Bluetooth: L2CAP socket layer initialized
[   16.593486] Bluetooth: SCO socket layer initialized
[   16.613418] ath: phy0: ASPM enabled: 0x43
[   16.613422] ath: EEPROM regdomain: 0x65
[   16.613423] ath: EEPROM indicates we should expect a direct regpair map
[   16.613424] ath: Country alpha2 being used: 00
[   16.613425] ath: Regpair used: 0x65
[   16.613596] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   16.639595] media: Linux media interface: v0.10
[   16.645228] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   16.645591] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8780000, irq=16
[   16.669495] usbcore: registered new interface driver btusb
[   16.774371] Linux video capture interface: v2.00
[   17.019954] usbcore: registered new interface driver ath3k
[   17.242457] usb 1-1.5: USB disconnect, device number 4
[   17.269412] uvcvideo: Found UVC 1.00 device Sony Visual Communication Camera (04f2:b28a)
[   17.284958] input: Sony Visual Communication Camer as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input14
[   17.285017] usbcore: registered new interface driver uvcvideo
[   17.285019] USB Video Class driver (1.1.1)
[   17.644984] cfg80211: World regulatory domain updated:
[   17.644986] cfg80211:  DFS Master region: unset
[   17.644988] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   17.644989] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   17.644991] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   17.644992] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   17.644994] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   17.644995] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   17.644996] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   17.644997] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   17.644999] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   17.699404] usb 1-1.5: new full-speed USB device number 5 using ehci-pci
[   17.792655] usb 1-1.5: New USB device found, idVendor=0cf3, idProduct=3005
[   17.792666] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   19.222723] audit: type=1400 audit(1447124763.807:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=593 comm="apparmor_parser"
[   19.222737] audit: type=1400 audit(1447124763.807:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=593 comm="apparmor_parser"
[   19.228814] audit: type=1400 audit(1447124763.807:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=593 comm="apparmor_parser"
[   19.228829] audit: type=1400 audit(1447124763.807:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=593 comm="apparmor_parser"
[   19.228833] audit: type=1400 audit(1447124763.807:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=593 comm="apparmor_parser"
[   19.228837] audit: type=1400 audit(1447124763.807:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=593 comm="apparmor_parser"
[   19.442945] audit: type=1400 audit(1447124764.023:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=593 comm="apparmor_parser"
[   19.442953] audit: type=1400 audit(1447124764.023:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=593 comm="apparmor_parser"
[   19.442958] audit: type=1400 audit(1447124764.023:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=593 comm="apparmor_parser"
[   19.442962] audit: type=1400 audit(1447124764.023:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=593 comm="apparmor_parser"
[  101.106181] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  101.106184] Bluetooth: BNEP filters: protocol multicast
[  101.106189] Bluetooth: BNEP socket layer initialized
[  101.268890] vboxdrv: Found 4 processor cores
[  101.286996] vboxdrv: TSC mode is Invariant, tentative frequency 2494334498 Hz
[  101.286999] vboxdrv: Successfully loaded version 5.0.8 (interface 0x00240000)
[  101.490329] VBoxNetFlt: Successfully started.
[  101.492127] VBoxNetAdp: Successfully started.
[  101.493381] VBoxPciLinuxInit
[  101.497208] vboxpci: IOMMU not found (not registered)
[  101.599871] cgroup: new mount options do not match the existing superblock, will be ignored
[  102.272351] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  102.472074] r8169 0000:13:00.0 eth0: link down
[  102.472099] r8169 0000:13:00.0 eth0: link down
[  102.472139] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  102.474343] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  104.604119] r8169 0000:13:00.0 eth0: link up
[  104.604126] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  108.869042] Bluetooth: RFCOMM TTY layer initialized
[  108.869049] Bluetooth: RFCOMM socket layer initialized
[  108.869053] Bluetooth: RFCOMM ver 1.11
[ 5889.592590] PM: Syncing filesystems ... done.
[ 5889.830173] PM: Preparing system for sleep (mem)
[ 5891.461426] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 5891.463056] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 5891.464162] PM: Suspending system (mem)
[ 5891.464217] Suspending console(s) (use no_console_suspend to debug)
[ 5891.464465] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 5891.464732] sd 0:0:0:0: [sda] Stopping disk
[ 5892.495486] PM: suspend of devices complete after 1029.980 msecs
[ 5892.496154] PM: late suspend of devices complete after 0.661 msecs
[ 5892.497780] r8169 0000:13:00.0: System wakeup enabled by ACPI
[ 5892.498120] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 5892.498256] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 5892.511590] PM: noirq suspend of devices complete after 15.413 msecs
[ 5892.512120] ACPI: Preparing to enter system sleep state S3
[ 5892.551502] ACPI : EC: EC stopped
[ 5892.551503] PM: Saving platform NVS memory
[ 5892.552453] Disabling non-boot CPUs ...
[ 5892.553788] smpboot: CPU 1 is now offline
[ 5892.564120] Broke affinity for irq 27
[ 5892.565147] smpboot: CPU 2 is now offline
[ 5892.576110] Broke affinity for irq 23
[ 5892.576115] Broke affinity for irq 26
[ 5892.576117] Broke affinity for irq 27
[ 5892.577164] smpboot: CPU 3 is now offline
[ 5892.589476] ACPI: Low-level resume complete
[ 5892.589528] ACPI : EC: EC started
[ 5892.589528] PM: Restoring platform NVS memory
[ 5892.590540] microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12
[ 5892.590669] Enabling non-boot CPUs ...
[ 5892.590706] x86: Booting SMP configuration:
[ 5892.590707] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 5892.591710] Initializing CPU#1
[ 5892.606164]  cache: parent cpu1 should not be sleeping
[ 5892.606369] CPU1 is up
[ 5892.606426] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 5892.607804] microcode: CPU2 microcode updated early to revision 0x29, date = 2013-06-12
[ 5892.607805] Initializing CPU#2
[ 5892.622226]  cache: parent cpu2 should not be sleeping
[ 5892.622428] CPU2 is up
[ 5892.622479] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 5892.623904] Initializing CPU#3
[ 5892.638276]  cache: parent cpu3 should not be sleeping
[ 5892.638472] CPU3 is up
[ 5892.642462] ACPI: Waking up from system sleep state S3
[ 5892.678932] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 5892.679010] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 5892.679149] PM: noirq resume of devices complete after 17.119 msecs
[ 5892.679342] PM: early resume of devices complete after 0.180 msecs
[ 5892.682040] r8169 0000:13:00.0: System wakeup disabled by ACPI
[ 5892.683054] ath: phy0: ASPM enabled: 0x43
[ 5892.710445] sd 0:0:0:0: [sda] Starting disk
[ 5892.914268] usb 1-1.5: reset full-speed USB device number 5 using ehci-pci
[ 5892.914325] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 5893.006587] usb 1-1.5: device firmware changed
[ 5893.010382] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5893.017484] ata4.00: configured for UDMA/100
[ 5893.093954] r8169 0000:13:00.0 eth0: link down
[ 5893.102592] usb 2-1.2: reset low-speed USB device number 3 using ehci-pci
[ 5893.387912] PM: resume of devices complete after 707.756 msecs
[ 5893.388294] PM: Finishing wakeup.
[ 5893.388295] Restarting tasks ... done.
[ 5893.407409] usb 1-1.5: USB disconnect, device number 5
[ 5893.478875] usb 1-1.5: new full-speed USB device number 6 using ehci-pci
[ 5893.571827] usb 1-1.5: New USB device found, idVendor=0489, idProduct=e027
[ 5893.571830] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5893.965044] usb 1-1.5: USB disconnect, device number 6
[ 5894.419946] usb 1-1.5: new full-speed USB device number 7 using ehci-pci
[ 5894.513150] usb 1-1.5: New USB device found, idVendor=0cf3, idProduct=3005
[ 5894.513155] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5894.796652] video LNXVIDEO:00: Restoring backlight state
[ 5894.991185] r8169 0000:13:00.0 eth0: link up
[ 5896.261918] i8042: Can't write CTR while closing AUX port
[ 5896.262179] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5896.503456] ata1.00: configured for UDMA/100
[ 5896.778341] i8042: Can't reactivate AUX port
[ 5896.911335] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5897.042861] r8169 0000:13:00.0 eth0: link down
[ 5897.042883] r8169 0000:13:00.0 eth0: link down
[ 5897.042915] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5897.047651] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5898.190611] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input17
[ 5898.203297] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input16
[ 5899.174346] r8169 0000:13:00.0 eth0: link up
[ 5899.174356] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5899.887274] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input20
[ 5899.899919] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input19
[ 5975.666040] usb 2-1.1: new high-speed USB device number 4 using ehci-pci
[ 5975.760037] usb 2-1.1: New USB device found, idVendor=1058, idProduct=0748
[ 5975.760048] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 5975.760054] usb 2-1.1: Product: My Passport 0748
[ 5975.760059] usb 2-1.1: Manufacturer: Western Digital
[ 5975.760064] usb 2-1.1: SerialNumber: 575842314536325354443737
[ 5975.986992] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[ 5975.987829] scsi host6: usb-storage 2-1.1:1.0
[ 5975.987933] usbcore: registered new interface driver usb-storage
[ 5976.033958] usbcore: registered new interface driver uas
[ 5976.988628] scsi 6:0:0:0: Direct-Access     WD       My Passport 0748 1022 PQ: 0 ANSI: 6
[ 5976.989215] scsi 6:0:0:1: Enclosure         WD       SES Device       1022 PQ: 0 ANSI: 6
[ 5976.992938] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 5976.993188] scsi 6:0:0:1: Attached scsi generic sg3 type 13
[ 5976.999102] sd 6:0:0:0: [sdb] Spinning up disk...
[ 5977.517050] usb 2-1.2: USB disconnect, device number 3
[ 5977.748197] usb 2-1.2: new low-speed USB device number 5 using ehci-pci
[ 5977.844485] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[ 5977.844495] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5977.844501] usb 2-1.2: Product:  USB OPTICAL MOUSE
[ 5977.847106] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0002/input/input21
[ 5977.900609] hid-generic 0003:0000:0538.0002: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[ 5978.004516] .
[ 5978.285924] usb 2-1.2: USB disconnect, device number 5
[ 5978.621189] usb 2-1.2: new low-speed USB device number 6 using ehci-pci
[ 5978.717385] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[ 5978.717389] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5978.717390] usb 2-1.2: Product:  USB OPTICAL MOUSE
[ 5978.720054] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0003/input/input22
[ 5978.773550] hid-generic 0003:0000:0538.0003: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[ 5983.775602] ready
[ 5983.776757] sd 6:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB)
[ 5983.778811] sd 6:0:0:0: [sdb] Write Protect is off
[ 5983.778813] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
[ 5983.780398] sd 6:0:0:0: [sdb] No Caching mode page found
[ 5983.780402] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 5983.797523]  sdb: sdb1
[ 5983.799945] ses 6:0:0:1: Attached Enclosure device
[ 5983.840113] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 6459.702303] perf interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 7052.145083] usb 2-1.2: USB disconnect, device number 6
[ 7052.377928] usb 2-1.2: new low-speed USB device number 7 using ehci-pci
[ 7052.474431] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[ 7052.474442] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 7052.474448] usb 2-1.2: Product:  USB OPTICAL MOUSE
[ 7052.477327] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0004/input/input23
[ 7052.530382] hid-generic 0003:0000:0538.0004: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[ 7054.964278] usb 2-1.2: USB disconnect, device number 7
[ 7055.293378] usb 2-1.2: new low-speed USB device number 8 using ehci-pci
[ 7055.389147] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[ 7055.389153] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 7055.389156] usb 2-1.2: Product:  USB OPTICAL MOUSE
[ 7055.392251] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0005/input/input24
[ 7055.445891] hid-generic 0003:0000:0538.0005: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[ 7055.733162] usb 2-1.2: USB disconnect, device number 8
[ 7056.442708] usb 2-1.2: new low-speed USB device number 9 using ehci-pci
[ 7058.236705] usb 2-1.2: new low-speed USB device number 10 using ehci-pci
[ 7058.333127] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[ 7058.333138] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 7058.333160] usb 2-1.2: Product:  USB OPTICAL MOUSE
[ 7058.336341] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0006/input/input25
[ 7058.336510] hid-generic 0003:0000:0538.0006: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[11743.497096] capability: warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[11754.579265] vboxdrv: f9046020 VMMR0.r0
[11755.247711] vboxdrv: f8fa6020 VBoxDDR0.r0
[11755.263482] vboxdrv: f8db6020 VBoxDD2R0.r0
[12776.096045] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[12776.137654] JFS: nTxBlock = 8192, nTxLock = 65536
[12776.191915] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[12776.312853] QNX4 filesystem 0.2.3 registered.
[12776.440472] raid6: mmxx1    gen()  2605 MB/s
[12776.508564] raid6: mmxx2    gen()  2800 MB/s
[12776.576641] raid6: sse1x1   gen()  2239 MB/s
[12776.644725] raid6: sse1x2   gen()  2890 MB/s
[12776.712780] raid6: sse2x1   gen()  4757 MB/s
[12776.780868] raid6: sse2x1   xor()  3654 MB/s
[12776.848939] raid6: sse2x2   gen()  5813 MB/s
[12776.917006] raid6: sse2x2   xor()  4113 MB/s
[12776.917009] raid6: using algorithm sse2x2 gen() 5813 MB/s
[12776.917011] raid6: .... xor() 4113 MB/s, rmw enabled
[12776.917013] raid6: using ssse3x1 recovery algorithm
[12776.947138] xor: automatically using best checksumming function:
[12776.985086]    avx       :  9623.000 MB/sec
[12777.065579] Btrfs loaded
[12777.429403] EXT4-fs (sda2): VFS: Can't find ext4 filesystem
[12777.433963] EXT4-fs (sda2): VFS: Can't find ext4 filesystem
[12777.438166] EXT4-fs (sda2): VFS: Can't find ext4 filesystem
[12777.442420] FAT-fs (sda2): bogus number of reserved sectors
[12777.442429] FAT-fs (sda2): Can't find a valid FAT filesystem
[12777.453576] XFS (sda2): Invalid superblock magic number
[12777.460964] FAT-fs (sda2): bogus number of reserved sectors
[12777.460972] FAT-fs (sda2): Can't find a valid FAT filesystem
[12777.470011] VFS: Can't find a Minix filesystem V1 | V2 | V3 on device sda2.
[12777.501750] hfsplus: unable to find HFS+ superblock
[12777.505887] qnx4: no qnx4 filesystem (no root dir).
[12777.509150] ufs: You didn't specify the type of your ufs filesystem
               
               mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
               
               >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[12777.509684] ufs: ufs_fill_super(): bad magic number
[12777.516707] hfs: can't find a HFS filesystem on dev sda2
[12796.941044] EXT4-fs (sda2): VFS: Can't find ext4 filesystem
[12796.945777] EXT4-fs (sda2): VFS: Can't find ext4 filesystem
[12796.949705] EXT4-fs (sda2): VFS: Can't find ext4 filesystem
[12796.953578] FAT-fs (sda2): bogus number of reserved sectors
[12796.953586] FAT-fs (sda2): Can't find a valid FAT filesystem
[12796.964195] XFS (sda2): Invalid superblock magic number
[12796.971222] FAT-fs (sda2): bogus number of reserved sectors
[12796.971232] FAT-fs (sda2): Can't find a valid FAT filesystem
[12796.980030] VFS: Can't find a Minix filesystem V1 | V2 | V3 on device sda2.
[12796.983295] hfsplus: unable to find HFS+ superblock
[12796.986243] qnx4: no qnx4 filesystem (no root dir).
[12796.989066] ufs: You didn't specify the type of your ufs filesystem
               
               mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
               
               >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[12796.989644] ufs: ufs_fill_super(): bad magic number
[12796.996878] hfs: can't find a HFS filesystem on dev sda2
[13237.128541] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[13237.315533] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[13238.212472] wlan0: authenticate with e8:de:27:51:59:15
[13238.226387] wlan0: send auth to e8:de:27:51:59:15 (try 1/3)
[13238.328530] wlan0: send auth to e8:de:27:51:59:15 (try 2/3)
[13238.382862] wlan0: authenticated
[13238.384615] wlan0: associate with e8:de:27:51:59:15 (try 1/3)
[13238.388601] wlan0: RX AssocResp from e8:de:27:51:59:15 (capab=0x411 status=0 aid=3)
[13238.388750] wlan0: associated
[13238.388794] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[13238.458732] ath: EEPROM regdomain: 0x8348
[13238.458737] ath: EEPROM indicates we should expect a country code
[13238.458739] ath: doing EEPROM country->regdmn map search
[13238.458741] ath: country maps to regdmn code: 0x3a
[13238.458743] ath: Country alpha2 being used: US
[13238.458745] ath: Regpair used: 0x3a
[13238.458747] ath: regdomain 0x8348 dynamically updated by country IE
[13238.458791] cfg80211: Regulatory domain changed to country: US
[13238.458793] cfg80211:  DFS Master region: FCC
[13238.458795] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[13238.458798] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[13238.458802] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[13238.458805] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[13238.458807] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[13238.458810] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[14578.006198] wlan0: deauthenticating from e8:de:27:51:59:15 by local choice (Reason: 3=DEAUTH_LEAVING)
[14578.221807] cfg80211: World regulatory domain updated:
[14578.221816] cfg80211:  DFS Master region: unset
[14578.221820] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[14578.221828] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[14578.221834] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[14578.221840] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[14578.221846] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[14578.221854] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[14578.221860] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[14578.221865] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[14578.221871] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[22957.510167] perf interrupt took too long (5008 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[28957.593596] usb 2-1.2: USB disconnect, device number 10
[28958.047828] usb 2-1.2: new low-speed USB device number 11 using ehci-pci
[28958.144167] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[28958.144178] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[28958.144184] usb 2-1.2: Product:  USB OPTICAL MOUSE
[28958.147664] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0007/input/input26
[28958.148453] hid-generic 0003:0000:0538.0007: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[30929.752886] usb 2-1.2: USB disconnect, device number 11
[30930.505425] usb 2-1.2: new low-speed USB device number 12 using ehci-pci
[30930.601778] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[30930.601789] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[30930.601794] usb 2-1.2: Product:  USB OPTICAL MOUSE
[30930.605340] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0008/input/input27
[30930.605843] hid-generic 0003:0000:0538.0008: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0

[heartsmagic]

Makineye takılı herhangi bir USB veya Bluetooth aygıt var mı?

[tthacktt]

hayir, acilis ve kapanista guvenli kaldir diyerek kaldiriyorum usb harddiski. Yani acilis sirasinda hicbir harici sey takili degil. Gec cevap verdim ozur dilrim cunku adada yasiyorum ve zman zaman internet sorunum oluyor

[heartsmagic]

Fare ve varsa eğer harici Bluetooth aygıtı da dahil mi buna?
Bir kere daha:

Kod Seç Genişlet

dmesg -Tçıktısı geçebilir misin buraya. Anormal bir bekleyiş var bazı bölümlerde.

[tthacktt]

harici Bluetooth yok ve fare bazan takili oluyor bazan olmuyor ama her iki durumda da hatalar ve sure degismiyor.

Kod Seç Genişlet

tthacktt@tthacktt:~$ dmesg -T
[Sal Kas 17 13:29:38 2015] Initializing cgroup subsys cpuset
[Sal Kas 17 13:29:38 2015] Initializing cgroup subsys cpu
[Sal Kas 17 13:29:38 2015] Initializing cgroup subsys cpuacct
[Sal Kas 17 13:29:38 2015] Linux version 4.2.0-18-generic (buildd@lgw01-37) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #22-Ubuntu SMP Fri Nov 6 23:32:28 UTC 2015 (Ubuntu 4.2.0-18.22-generic 4.2.3)
[Sal Kas 17 13:29:38 2015] KERNEL supported cpus:
[Sal Kas 17 13:29:38 2015]   Intel GenuineIntel
[Sal Kas 17 13:29:38 2015]   AMD AuthenticAMD
[Sal Kas 17 13:29:38 2015]   NSC Geode by NSC
[Sal Kas 17 13:29:38 2015]   Cyrix CyrixInstead
[Sal Kas 17 13:29:38 2015]   Centaur CentaurHauls
[Sal Kas 17 13:29:38 2015]   Transmeta GenuineTMx86
[Sal Kas 17 13:29:38 2015]   Transmeta TransmetaCPU
[Sal Kas 17 13:29:38 2015]   UMC UMC UMC UMC
[Sal Kas 17 13:29:38 2015] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[Sal Kas 17 13:29:38 2015] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[Sal Kas 17 13:29:38 2015] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[Sal Kas 17 13:29:38 2015] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[Sal Kas 17 13:29:38 2015] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[Sal Kas 17 13:29:38 2015] x86/fpu: Using 'eager' FPU context switches.
[Sal Kas 17 13:29:38 2015] e820: BIOS-provided physical RAM map:
[Sal Kas 17 13:29:38 2015] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[Sal Kas 17 13:29:38 2015] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[Sal Kas 17 13:29:38 2015] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[Sal Kas 17 13:29:38 2015] BIOS-e820: [mem 0x0000000000100000-0x00000000bf63efff] usable
[Sal Kas 17 13:29:38 2015] BIOS-e820: [mem 0x00000000bf63f000-0x00000000bf6befff] reserved
[Sal Kas 17 13:29:38 2015] BIOS-e820: [mem 0x00000000bf6bf000-0x00000000bf7befff] ACPI NVS
[Sal Kas 17 13:29:38 2015] BIOS-e820: [mem 0x00000000bf7bf000-0x00000000bf7fefff] ACPI data
[Sal Kas 17 13:29:38 2015] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[Sal Kas 17 13:29:38 2015] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[Sal Kas 17 13:29:38 2015] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[Sal Kas 17 13:29:38 2015] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[Sal Kas 17 13:29:38 2015] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[Sal Kas 17 13:29:38 2015] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[Sal Kas 17 13:29:38 2015] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[Sal Kas 17 13:29:38 2015] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[Sal Kas 17 13:29:38 2015] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[Sal Kas 17 13:29:38 2015] BIOS-e820: [mem 0x0000000100000000-0x000000013f7fffff] usable
[Sal Kas 17 13:29:38 2015] NX (Execute Disable) protection: active
[Sal Kas 17 13:29:38 2015] SMBIOS 2.7 present.
[Sal Kas 17 13:29:38 2015] DMI: Sony Corporation VPCEH38FH/VAIO, BIOS R0190Z9 11/17/2011
[Sal Kas 17 13:29:38 2015] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[Sal Kas 17 13:29:38 2015] e820: remove [mem 0x000a0000-0x000fffff] usable
[Sal Kas 17 13:29:38 2015] e820: last_pfn = 0x13f800 max_arch_pfn = 0x1000000
[Sal Kas 17 13:29:38 2015] MTRR default type: uncachable
[Sal Kas 17 13:29:38 2015] MTRR fixed ranges enabled:
[Sal Kas 17 13:29:38 2015]   00000-9FFFF write-back
[Sal Kas 17 13:29:38 2015]   A0000-BFFFF uncachable
[Sal Kas 17 13:29:38 2015]   C0000-FFFFF write-protect
[Sal Kas 17 13:29:38 2015] MTRR variable ranges enabled:
[Sal Kas 17 13:29:38 2015]   0 base 0FFE00000 mask FFFE00000 write-protect
[Sal Kas 17 13:29:38 2015]   1 base 000000000 mask F80000000 write-back
[Sal Kas 17 13:29:38 2015]   2 base 080000000 mask FC0000000 write-back
[Sal Kas 17 13:29:38 2015]   3 base 0BF800000 mask FFF800000 uncachable
[Sal Kas 17 13:29:38 2015]   4 base 100000000 mask FC0000000 write-back
[Sal Kas 17 13:29:38 2015]   5 base 13F800000 mask FFF800000 uncachable
[Sal Kas 17 13:29:38 2015]   6 disabled
[Sal Kas 17 13:29:38 2015]   7 disabled
[Sal Kas 17 13:29:38 2015]   8 disabled
[Sal Kas 17 13:29:38 2015]   9 disabled
[Sal Kas 17 13:29:38 2015] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[Sal Kas 17 13:29:38 2015] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
[Sal Kas 17 13:29:38 2015] Scanning 1 areas for low memory corruption
[Sal Kas 17 13:29:38 2015] initial memory mapped: [mem 0x00000000-0x021fffff]
[Sal Kas 17 13:29:38 2015] Base memory trampoline at [c0099000] 99000 size 16384
[Sal Kas 17 13:29:38 2015] init_memory_mapping: [mem 0x00000000-0x000fffff]
[Sal Kas 17 13:29:38 2015]  [mem 0x00000000-0x000fffff] page 4k
[Sal Kas 17 13:29:38 2015] init_memory_mapping: [mem 0x37800000-0x379fffff]
[Sal Kas 17 13:29:38 2015]  [mem 0x37800000-0x379fffff] page 2M
[Sal Kas 17 13:29:38 2015] init_memory_mapping: [mem 0x20000000-0x377fffff]
[Sal Kas 17 13:29:38 2015]  [mem 0x20000000-0x377fffff] page 2M
[Sal Kas 17 13:29:38 2015] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[Sal Kas 17 13:29:38 2015]  [mem 0x00100000-0x001fffff] page 4k
[Sal Kas 17 13:29:38 2015]  [mem 0x00200000-0x1fffffff] page 2M
[Sal Kas 17 13:29:38 2015] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[Sal Kas 17 13:29:38 2015]  [mem 0x37a00000-0x37bfdfff] page 4k
[Sal Kas 17 13:29:38 2015] BRK [0x01cdc000, 0x01cdcfff] PGTABLE
[Sal Kas 17 13:29:38 2015] BRK [0x01cdd000, 0x01cddfff] PGTABLE
[Sal Kas 17 13:29:38 2015] RAMDISK: [mem 0x34218000-0x36103fff]
[Sal Kas 17 13:29:38 2015] ACPI: Early table checksum verification disabled
[Sal Kas 17 13:29:38 2015] ACPI: RSDP 0x00000000000FE020 000024 (v02 Sony  )
[Sal Kas 17 13:29:38 2015] ACPI: XSDT 0x00000000BF7FE120 000084 (v01 Sony   VAIO     20111117      01000013)
[Sal Kas 17 13:29:38 2015] ACPI: FACP 0x00000000BF7FC000 0000F4 (v04 Sony   VAIO     20111117 INTL 20061109)
[Sal Kas 17 13:29:38 2015] ACPI: DSDT 0x00000000BF7F1000 007907 (v01 Sony   VAIO     20111117 INTL 20061109)
[Sal Kas 17 13:29:38 2015] ACPI: FACS 0x00000000BF76E000 000040
[Sal Kas 17 13:29:38 2015] ACPI: FACS 0x00000000BF76E000 000040
[Sal Kas 17 13:29:38 2015] ACPI: ASF! 0x00000000BF7FD000 0000A5 (v32 Sony   VAIO     20111117 INTL 20061109)
[Sal Kas 17 13:29:38 2015] ACPI: HPET 0x00000000BF7FB000 000038 (v01 Sony   VAIO     20111117 INTL 20061109)
[Sal Kas 17 13:29:38 2015] ACPI: APIC 0x00000000BF7FA000 00008C (v02 Sony   VAIO     20111117 INTL 20061109)
[Sal Kas 17 13:29:38 2015] ACPI: MCFG 0x00000000BF7F9000 00003C (v01 Sony   VAIO     20111117 INTL 20061109)
[Sal Kas 17 13:29:38 2015] ACPI: SLIC 0x00000000BF7F0000 000176 (v01 Sony   VAIO     20111117 INTL 20061109)
[Sal Kas 17 13:29:38 2015] ACPI: WDAT 0x00000000BF7EF000 000224 (v01 Sony   VAIO     20111117 INTL 20061109)
[Sal Kas 17 13:29:38 2015] ACPI: SSDT 0x00000000BF7ED000 001068 (v01 Sony   VAIO     20111117 INTL 20061109)
[Sal Kas 17 13:29:38 2015] ACPI: BOOT 0x00000000BF7EB000 000028 (v01 Sony   VAIO     20111117 INTL 20061109)
[Sal Kas 17 13:29:38 2015] ACPI: ASPT 0x00000000BF7E8000 000034 (v07 Sony   VAIO     20111117 INTL 20061109)
[Sal Kas 17 13:29:38 2015] ACPI: SSDT 0x00000000BF7E7000 0007C2 (v01 Sony   VAIO     20111117 INTL 20061109)
[Sal Kas 17 13:29:38 2015] ACPI: SSDT 0x00000000BF7E6000 000996 (v01 Sony   VAIO     20111117 INTL 20061109)
[Sal Kas 17 13:29:38 2015] ACPI: Local APIC address 0xfee00000
[Sal Kas 17 13:29:38 2015] 4220MB HIGHMEM available.
[Sal Kas 17 13:29:38 2015] 891MB LOWMEM available.
[Sal Kas 17 13:29:38 2015]   mapped low ram: 0 - 37bfe000
[Sal Kas 17 13:29:38 2015]   low ram: 0 - 37bfe000
[Sal Kas 17 13:29:38 2015] Zone ranges:
[Sal Kas 17 13:29:38 2015]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[Sal Kas 17 13:29:38 2015]   Normal   [mem 0x0000000001000000-0x0000000037bfdfff]
[Sal Kas 17 13:29:38 2015]   HighMem  [mem 0x0000000037bfe000-0x000000013f7fffff]
[Sal Kas 17 13:29:38 2015] Movable zone start for each node
[Sal Kas 17 13:29:38 2015] Early memory node ranges
[Sal Kas 17 13:29:38 2015]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[Sal Kas 17 13:29:38 2015]   node   0: [mem 0x0000000000100000-0x00000000bf63efff]
[Sal Kas 17 13:29:38 2015]   node   0: [mem 0x00000000bf7ff000-0x00000000bf7fffff]
[Sal Kas 17 13:29:38 2015]   node   0: [mem 0x0000000100000000-0x000000013f7fffff]
[Sal Kas 17 13:29:38 2015] Initmem setup node 0 [mem 0x0000000000001000-0x000000013f7fffff]
[Sal Kas 17 13:29:38 2015] On node 0 totalpages: 1043932
[Sal Kas 17 13:29:38 2015]   DMA zone: 40 pages used for memmap
[Sal Kas 17 13:29:38 2015]   DMA zone: 0 pages reserved
[Sal Kas 17 13:29:38 2015]   DMA zone: 3996 pages, LIFO batch:0
[Sal Kas 17 13:29:38 2015]   Normal zone: 2190 pages used for memmap
[Sal Kas 17 13:29:38 2015]   Normal zone: 224254 pages, LIFO batch:31
[Sal Kas 17 13:29:38 2015]   HighMem zone: 815682 pages, LIFO batch:31
[Sal Kas 17 13:29:38 2015] Using APIC driver default
[Sal Kas 17 13:29:38 2015] ACPI: PM-Timer IO Port: 0x408
[Sal Kas 17 13:29:38 2015] ACPI: Local APIC address 0xfee00000
[Sal Kas 17 13:29:38 2015] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[Sal Kas 17 13:29:38 2015] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[Sal Kas 17 13:29:38 2015] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[Sal Kas 17 13:29:38 2015] ACPI: IRQ0 used by override.
[Sal Kas 17 13:29:38 2015] ACPI: IRQ9 used by override.
[Sal Kas 17 13:29:38 2015] Using ACPI (MADT) for SMP configuration information
[Sal Kas 17 13:29:38 2015] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[Sal Kas 17 13:29:38 2015] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[Sal Kas 17 13:29:38 2015] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[Sal Kas 17 13:29:38 2015] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[Sal Kas 17 13:29:38 2015] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[Sal Kas 17 13:29:38 2015] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[Sal Kas 17 13:29:38 2015] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[Sal Kas 17 13:29:38 2015] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[Sal Kas 17 13:29:38 2015] Booting paravirtualized kernel on bare hardware
[Sal Kas 17 13:29:38 2015] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[Sal Kas 17 13:29:38 2015] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[Sal Kas 17 13:29:38 2015] PERCPU: Embedded 19 pages/cpu @f623f000 s47116 r0 d30708 u77824
[Sal Kas 17 13:29:38 2015] pcpu-alloc: s47116 r0 d30708 u77824 alloc=19*4096
[Sal Kas 17 13:29:38 2015] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[Sal Kas 17 13:29:38 2015] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1041702
[Sal Kas 17 13:29:38 2015] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-18-generic root=UUID=dc980b9c-97ed-451d-88b5-32f78f3808b8 ro quiet splash
[Sal Kas 17 13:29:38 2015] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Sal Kas 17 13:29:38 2015] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Sal Kas 17 13:29:38 2015] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Sal Kas 17 13:29:38 2015] microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12
[Sal Kas 17 13:29:38 2015] Initializing CPU#0
[Sal Kas 17 13:29:38 2015] Initializing HighMem for node 0 (00037bfe:0013f800)
[Sal Kas 17 13:29:38 2015] Initializing Movable for node 0 (00000000:00000000)
[Sal Kas 17 13:29:38 2015] Memory: 4088292K/4175728K available (7574K kernel code, 738K rwdata, 3020K rodata, 928K init, 796K bss, 87436K reserved, 0K cma-reserved, 3262728K highmem)
[Sal Kas 17 13:29:38 2015] virtual kernel memory layout:
                               fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
                               pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                               vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                               lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                                 .init : 0xc1b14000 - 0xc1bfc000   ( 928 kB)
                                 .data : 0xc1765bf0 - 0xc1b12a40   (3763 kB)
                                 .text : 0xc1000000 - 0xc1765bf0   (7574 kB)
[Sal Kas 17 13:29:38 2015] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[Sal Kas 17 13:29:38 2015] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[Sal Kas 17 13:29:38 2015] Hierarchical RCU implementation.
[Sal Kas 17 13:29:38 2015] Build-time adjustment of leaf fanout to 32.
[Sal Kas 17 13:29:38 2015] NR_IRQS:2304 nr_irqs:488 16
[Sal Kas 17 13:29:38 2015] CPU 0 irqstacks, hard=f2c3a000 soft=f2c3c000
[Sal Kas 17 13:29:38 2015] Console: colour VGA+ 80x25
[Sal Kas 17 13:29:38 2015] console [tty0] enabled
[Sal Kas 17 13:29:38 2015] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[Sal Kas 17 13:29:38 2015] hpet clockevent registered
[Sal Kas 17 13:29:38 2015] tsc: Fast TSC calibration using PIT
[Sal Kas 17 13:29:38 2015] tsc: Detected 2494.324 MHz processor
[Sal Kas 17 13:29:38 2015] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.64 BogoMIPS (lpj=9977296)
[Sal Kas 17 13:29:38 2015] pid_max: default: 32768 minimum: 301
[Sal Kas 17 13:29:38 2015] ACPI: Core revision 20150619
[Sal Kas 17 13:29:38 2015] ACPI: All ACPI Tables successfully acquired
[Sal Kas 17 13:29:38 2015] Security Framework initialized
[Sal Kas 17 13:29:38 2015] AppArmor: AppArmor initialized
[Sal Kas 17 13:29:38 2015] Yama: becoming mindful.
[Sal Kas 17 13:29:38 2015] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Sal Kas 17 13:29:38 2015] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Sal Kas 17 13:29:38 2015] Initializing cgroup subsys blkio
[Sal Kas 17 13:29:38 2015] Initializing cgroup subsys memory
[Sal Kas 17 13:29:38 2015] Initializing cgroup subsys devices
[Sal Kas 17 13:29:38 2015] Initializing cgroup subsys freezer
[Sal Kas 17 13:29:38 2015] Initializing cgroup subsys net_cls
[Sal Kas 17 13:29:38 2015] Initializing cgroup subsys perf_event
[Sal Kas 17 13:29:38 2015] Initializing cgroup subsys net_prio
[Sal Kas 17 13:29:38 2015] Initializing cgroup subsys hugetlb
[Sal Kas 17 13:29:38 2015] CPU: Physical Processor ID: 0
[Sal Kas 17 13:29:38 2015] CPU: Processor Core ID: 0
[Sal Kas 17 13:29:38 2015] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[Sal Kas 17 13:29:38 2015] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[Sal Kas 17 13:29:38 2015] mce: CPU supports 7 MCE banks
[Sal Kas 17 13:29:38 2015] CPU0: Thermal monitoring handled by SMI
[Sal Kas 17 13:29:38 2015] process: using mwait in idle threads
[Sal Kas 17 13:29:38 2015] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[Sal Kas 17 13:29:38 2015] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[Sal Kas 17 13:29:38 2015] Freeing SMP alternatives memory: 28K (c1bfc000 - c1c03000)
[Sal Kas 17 13:29:38 2015] ftrace: allocating 30215 entries in 60 pages
[Sal Kas 17 13:29:38 2015] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[Sal Kas 17 13:29:38 2015] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[Sal Kas 17 13:29:38 2015] TSC deadline timer enabled
[Sal Kas 17 13:29:38 2015] smpboot: CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07)
[Sal Kas 17 13:29:38 2015] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[Sal Kas 17 13:29:38 2015] ... version:                3
[Sal Kas 17 13:29:38 2015] ... bit width:              48
[Sal Kas 17 13:29:38 2015] ... generic registers:      4
[Sal Kas 17 13:29:38 2015] ... value mask:             0000ffffffffffff
[Sal Kas 17 13:29:38 2015] ... max period:             0000ffffffffffff
[Sal Kas 17 13:29:38 2015] ... fixed-purpose events:   3
[Sal Kas 17 13:29:38 2015] ... event mask:             000000070000000f
[Sal Kas 17 13:29:38 2015] CPU 1 irqstacks, hard=f2d94000 soft=f2d96000
[Sal Kas 17 13:29:38 2015] x86: Booting SMP configuration:
[Sal Kas 17 13:29:38 2015] .... node  #0, CPUs:      #1
[Sal Kas 17 13:29:38 2015] Initializing CPU#1
[Sal Kas 17 13:29:38 2015] CPU1: Thermal monitoring handled by SMI
[Sal Kas 17 13:29:38 2015] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[Sal Kas 17 13:29:38 2015] CPU 2 irqstacks, hard=f2eec000 soft=f2eee000
[Sal Kas 17 13:29:38 2015]  #2
[Sal Kas 17 13:29:38 2015] microcode: CPU2 microcode updated early to revision 0x29, date = 2013-06-12
[Sal Kas 17 13:29:38 2015] Initializing CPU#2
[Sal Kas 17 13:29:38 2015] CPU2: Thermal monitoring handled by SMI
[Sal Kas 17 13:29:38 2015] CPU 3 irqstacks, hard=f2f50000 soft=f2f52000
[Sal Kas 17 13:29:38 2015]  #3
[Sal Kas 17 13:29:38 2015] Initializing CPU#3
[Sal Kas 17 13:29:38 2015] CPU3: Thermal monitoring handled by SMI
[Sal Kas 17 13:29:38 2015] x86: Booted up 1 node, 4 CPUs
[Sal Kas 17 13:29:38 2015] smpboot: Total of 4 processors activated (19954.59 BogoMIPS)
[Sal Kas 17 13:29:38 2015] devtmpfs: initialized
[Sal Kas 17 13:29:38 2015] evm: security.selinux
[Sal Kas 17 13:29:38 2015] evm: security.SMACK64
[Sal Kas 17 13:29:38 2015] evm: security.SMACK64EXEC
[Sal Kas 17 13:29:38 2015] evm: security.SMACK64TRANSMUTE
[Sal Kas 17 13:29:38 2015] evm: security.SMACK64MMAP
[Sal Kas 17 13:29:38 2015] evm: security.ima
[Sal Kas 17 13:29:38 2015] evm: security.capability
[Sal Kas 17 13:29:38 2015] PM: Registering ACPI NVS region [mem 0xbf6bf000-0xbf7befff] (1048576 bytes)
[Sal Kas 17 13:29:38 2015] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[Sal Kas 17 13:29:38 2015] pinctrl core: initialized pinctrl subsystem
[Sal Kas 17 13:29:38 2015] RTC time:  6:29:34, date: 11/17/15
[Sal Kas 17 13:29:38 2015] NET: Registered protocol family 16
[Sal Kas 17 13:29:38 2015] EISA bus registered
[Sal Kas 17 13:29:38 2015] cpuidle: using governor ladder
[Sal Kas 17 13:29:38 2015] cpuidle: using governor menu
[Sal Kas 17 13:29:38 2015] Simple Boot Flag at 0x44 set to 0x1
[Sal Kas 17 13:29:38 2015] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[Sal Kas 17 13:29:38 2015] ACPI: bus type PCI registered
[Sal Kas 17 13:29:38 2015] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[Sal Kas 17 13:29:38 2015] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[Sal Kas 17 13:29:38 2015] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[Sal Kas 17 13:29:38 2015] PCI: Using MMCONFIG for extended config space
[Sal Kas 17 13:29:38 2015] PCI: Using configuration type 1 for base access
[Sal Kas 17 13:29:38 2015] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[Sal Kas 17 13:29:38 2015] mtrr: your CPUs had inconsistent variable MTRR settings
[Sal Kas 17 13:29:38 2015] mtrr: probably your BIOS does not setup all CPUs.
[Sal Kas 17 13:29:38 2015] mtrr: corrected configuration.
[Sal Kas 17 13:29:38 2015] ACPI: Added _OSI(Module Device)
[Sal Kas 17 13:29:38 2015] ACPI: Added _OSI(Processor Device)
[Sal Kas 17 13:29:38 2015] ACPI: Added _OSI(3.0 _SCP Extensions)
[Sal Kas 17 13:29:38 2015] ACPI: Added _OSI(Processor Aggregator Device)
[Sal Kas 17 13:29:38 2015] ACPI: Executed 1 blocks of module-level executable AML code
[Sal Kas 17 13:29:38 2015] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[Sal Kas 17 13:29:38 2015] ACPI: Dynamic OEM Table Load:
[Sal Kas 17 13:29:38 2015] ACPI: SSDT 0x00000000F2C12800 00067C (v01 PmRef  Cpu0Cst  00003001 INTL 20100121)
[Sal Kas 17 13:29:38 2015] ACPI: Dynamic OEM Table Load:
[Sal Kas 17 13:29:38 2015] ACPI: SSDT 0x00000000F2C87C00 000303 (v01 PmRef  ApIst    00003000 INTL 20100121)
[Sal Kas 17 13:29:38 2015] ACPI: Dynamic OEM Table Load:
[Sal Kas 17 13:29:38 2015] ACPI: SSDT 0x00000000F2FB6200 000119 (v01 PmRef  ApCst    00003000 INTL 20100121)
[Sal Kas 17 13:29:38 2015] ACPI : EC: EC started
[Sal Kas 17 13:29:38 2015] ACPI: Interpreter enabled
[Sal Kas 17 13:29:38 2015] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[Sal Kas 17 13:29:38 2015] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[Sal Kas 17 13:29:38 2015] ACPI: (supports S0 S3 S4 S5)
[Sal Kas 17 13:29:38 2015] ACPI: Using IOAPIC for interrupt routing
[Sal Kas 17 13:29:38 2015] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Sal Kas 17 13:29:38 2015] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[Sal Kas 17 13:29:38 2015] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[Sal Kas 17 13:29:38 2015] \_SB_.PCI0:_OSC invalid UUID
[Sal Kas 17 13:29:38 2015] _OSC request data:1 1f 0
[Sal Kas 17 13:29:38 2015] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[Sal Kas 17 13:29:38 2015] PCI host bridge to bus 0000:00
[Sal Kas 17 13:29:38 2015] pci_bus 0000:00: root bus resource [bus 00-fe]
[Sal Kas 17 13:29:38 2015] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[Sal Kas 17 13:29:38 2015] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[Sal Kas 17 13:29:38 2015] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[Sal Kas 17 13:29:38 2015] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window]
[Sal Kas 17 13:29:38 2015] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[Sal Kas 17 13:29:38 2015] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[Sal Kas 17 13:29:38 2015] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[Sal Kas 17 13:29:38 2015] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[Sal Kas 17 13:29:38 2015] pci 0000:00:16.0: reg 0x10: [mem 0xd5304000-0xd530400f 64bit]
[Sal Kas 17 13:29:38 2015] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[Sal Kas 17 13:29:38 2015] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[Sal Kas 17 13:29:38 2015] pci 0000:00:1a.0: reg 0x10: [mem 0xd5309000-0xd53093ff]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[Sal Kas 17 13:29:38 2015] pci 0000:00:1a.0: System wakeup disabled by ACPI
[Sal Kas 17 13:29:38 2015] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[Sal Kas 17 13:29:38 2015] pci 0000:00:1b.0: reg 0x10: [mem 0xd5300000-0xd5303fff 64bit]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.0: System wakeup disabled by ACPI
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.3: System wakeup disabled by ACPI
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.5: System wakeup disabled by ACPI
[Sal Kas 17 13:29:38 2015] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[Sal Kas 17 13:29:38 2015] pci 0000:00:1d.0: reg 0x10: [mem 0xd5308000-0xd53083ff]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[Sal Kas 17 13:29:38 2015] pci 0000:00:1d.0: System wakeup disabled by ACPI
[Sal Kas 17 13:29:38 2015] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[Sal Kas 17 13:29:38 2015] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[Sal Kas 17 13:29:38 2015] pci 0000:00:1f.2: reg 0x10: [io  0x5048-0x504f]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1f.2: reg 0x14: [io  0x5054-0x5057]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1f.2: reg 0x18: [io  0x5040-0x5047]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1f.2: reg 0x1c: [io  0x5050-0x5053]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1f.2: reg 0x20: [io  0x5020-0x503f]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1f.2: reg 0x24: [mem 0xd5307000-0xd53077ff]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1f.2: PME# supported from D3hot
[Sal Kas 17 13:29:38 2015] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[Sal Kas 17 13:29:38 2015] pci 0000:00:1f.3: reg 0x10: [mem 0xd5305000-0xd53050ff 64bit]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1f.3: reg 0x20: [io  0x5000-0x501f]
[Sal Kas 17 13:29:38 2015] pci 0000:01:00.0: [10de:1055] type 00 class 0x030000
[Sal Kas 17 13:29:38 2015] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[Sal Kas 17 13:29:38 2015] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[Sal Kas 17 13:29:38 2015] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[Sal Kas 17 13:29:38 2015] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
[Sal Kas 17 13:29:38 2015] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[Sal Kas 17 13:29:38 2015] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
[Sal Kas 17 13:29:38 2015] pci 0000:01:00.1: reg 0x10: [mem 0xd3000000-0xd3003fff]
[Sal Kas 17 13:29:38 2015] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[Sal Kas 17 13:29:38 2015] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[Sal Kas 17 13:29:38 2015] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd30fffff]
[Sal Kas 17 13:29:38 2015] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[Sal Kas 17 13:29:38 2015] pci 0000:07:00.0: [168c:002b] type 00 class 0x028000
[Sal Kas 17 13:29:38 2015] pci 0000:07:00.0: reg 0x10: [mem 0xd5200000-0xd520ffff 64bit]
[Sal Kas 17 13:29:38 2015] pci 0000:07:00.0: supports D1
[Sal Kas 17 13:29:38 2015] pci 0000:07:00.0: PME# supported from D0 D1 D3hot D3cold
[Sal Kas 17 13:29:38 2015] pci 0000:07:00.0: System wakeup disabled by ACPI
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.0: PCI bridge to [bus 07]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.0:   bridge window [mem 0xd5200000-0xd52fffff]
[Sal Kas 17 13:29:38 2015] pci 0000:0d:00.0: [10ec:5209] type 00 class 0xff0000
[Sal Kas 17 13:29:38 2015] pci 0000:0d:00.0: reg 0x10: [mem 0xd4200000-0xd4200fff]
[Sal Kas 17 13:29:38 2015] pci 0000:0d:00.0: supports D1 D2
[Sal Kas 17 13:29:38 2015] pci 0000:0d:00.0: PME# supported from D1 D2 D3hot
[Sal Kas 17 13:29:38 2015] pci 0000:0d:00.0: System wakeup disabled by ACPI
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.3: PCI bridge to [bus 0d-12]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.3:   bridge window [mem 0xd4200000-0xd51fffff]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.3:   bridge window [mem 0xd3100000-0xd40fffff 64bit pref]
[Sal Kas 17 13:29:38 2015] pci 0000:13:00.0: [10ec:8168] type 00 class 0x020000
[Sal Kas 17 13:29:38 2015] pci 0000:13:00.0: reg 0x10: [io  0x2000-0x20ff]
[Sal Kas 17 13:29:38 2015] pci 0000:13:00.0: reg 0x18: [mem 0xd4104000-0xd4104fff 64bit pref]
[Sal Kas 17 13:29:38 2015] pci 0000:13:00.0: reg 0x20: [mem 0xd4100000-0xd4103fff 64bit pref]
[Sal Kas 17 13:29:38 2015] pci 0000:13:00.0: supports D1 D2
[Sal Kas 17 13:29:38 2015] pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[Sal Kas 17 13:29:38 2015] pci 0000:13:00.0: System wakeup disabled by ACPI
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.5: PCI bridge to [bus 13]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.5:   bridge window [mem 0xd4100000-0xd41fffff 64bit pref]
[Sal Kas 17 13:29:38 2015] pci_bus 0000:00: on NUMA node 0
[Sal Kas 17 13:29:38 2015] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[Sal Kas 17 13:29:38 2015] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[Sal Kas 17 13:29:38 2015] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[Sal Kas 17 13:29:38 2015] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[Sal Kas 17 13:29:38 2015] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[Sal Kas 17 13:29:38 2015] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[Sal Kas 17 13:29:38 2015] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[Sal Kas 17 13:29:38 2015] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[Sal Kas 17 13:29:38 2015] ACPI: Enabled 4 GPEs in block 00 to 3F
[Sal Kas 17 13:29:38 2015] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[Sal Kas 17 13:29:38 2015] vgaarb: setting as boot device: PCI:0000:01:00.0
[Sal Kas 17 13:29:38 2015] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[Sal Kas 17 13:29:38 2015] vgaarb: loaded
[Sal Kas 17 13:29:38 2015] vgaarb: bridge control possible 0000:01:00.0
[Sal Kas 17 13:29:38 2015] SCSI subsystem initialized
[Sal Kas 17 13:29:38 2015] libata version 3.00 loaded.
[Sal Kas 17 13:29:38 2015] ACPI: bus type USB registered
[Sal Kas 17 13:29:38 2015] usbcore: registered new interface driver usbfs
[Sal Kas 17 13:29:38 2015] usbcore: registered new interface driver hub
[Sal Kas 17 13:29:38 2015] usbcore: registered new device driver usb
[Sal Kas 17 13:29:38 2015] PCI: Using ACPI for IRQ routing
[Sal Kas 17 13:29:38 2015] PCI: pci_cache_line_size set to 64 bytes
[Sal Kas 17 13:29:38 2015] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[Sal Kas 17 13:29:38 2015] e820: reserve RAM buffer [mem 0xbf63f000-0xbfffffff]
[Sal Kas 17 13:29:38 2015] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[Sal Kas 17 13:29:38 2015] e820: reserve RAM buffer [mem 0x13f800000-0x13fffffff]
[Sal Kas 17 13:29:38 2015] NetLabel: Initializing
[Sal Kas 17 13:29:38 2015] NetLabel:  domain hash size = 128
[Sal Kas 17 13:29:38 2015] NetLabel:  protocols = UNLABELED CIPSOv4
[Sal Kas 17 13:29:38 2015] NetLabel:  unlabeled traffic allowed by default
[Sal Kas 17 13:29:38 2015] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[Sal Kas 17 13:29:38 2015] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[Sal Kas 17 13:29:38 2015] clocksource: Switched to clocksource hpet
[Sal Kas 17 13:29:38 2015] AppArmor: AppArmor Filesystem Enabled
[Sal Kas 17 13:29:38 2015] pnp: PnP ACPI init
[Sal Kas 17 13:29:38 2015] system 00:00: [io  0x0680-0x069f] has been reserved
[Sal Kas 17 13:29:38 2015] system 00:00: [io  0x1000-0x100f] has been reserved
[Sal Kas 17 13:29:38 2015] system 00:00: [io  0x1010-0x1013] has been reserved
[Sal Kas 17 13:29:38 2015] system 00:00: [io  0xffff] has been reserved
[Sal Kas 17 13:29:38 2015] system 00:00: [io  0x0400-0x0453] could not be reserved
[Sal Kas 17 13:29:38 2015] system 00:00: [io  0x0458-0x047f] has been reserved
[Sal Kas 17 13:29:38 2015] system 00:00: [io  0x0500-0x057f] has been reserved
[Sal Kas 17 13:29:38 2015] system 00:00: [io  0x164e-0x164f] has been reserved
[Sal Kas 17 13:29:38 2015] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[Sal Kas 17 13:29:38 2015] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[Sal Kas 17 13:29:38 2015] system 00:02: [io  0x0454-0x0457] has been reserved
[Sal Kas 17 13:29:38 2015] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[Sal Kas 17 13:29:38 2015] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[Sal Kas 17 13:29:38 2015] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[Sal Kas 17 13:29:38 2015] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[Sal Kas 17 13:29:38 2015] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[Sal Kas 17 13:29:38 2015] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[Sal Kas 17 13:29:38 2015] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[Sal Kas 17 13:29:38 2015] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[Sal Kas 17 13:29:38 2015] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[Sal Kas 17 13:29:38 2015] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[Sal Kas 17 13:29:38 2015] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[Sal Kas 17 13:29:38 2015] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[Sal Kas 17 13:29:38 2015] system 00:05: [mem 0xd5400000-0xd5400fff] has been reserved
[Sal Kas 17 13:29:38 2015] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[Sal Kas 17 13:29:38 2015] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
[Sal Kas 17 13:29:38 2015] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved
[Sal Kas 17 13:29:38 2015] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[Sal Kas 17 13:29:38 2015] pnp: PnP ACPI: found 7 devices
[Sal Kas 17 13:29:38 2015] PnPBIOS: Disabled by ACPI PNP
[Sal Kas 17 13:29:38 2015] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[Sal Kas 17 13:29:38 2015] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[Sal Kas 17 13:29:38 2015] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
[Sal Kas 17 13:29:38 2015] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[Sal Kas 17 13:29:38 2015] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[Sal Kas 17 13:29:38 2015] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd30fffff]
[Sal Kas 17 13:29:38 2015] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.0: PCI bridge to [bus 07]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.0:   bridge window [mem 0xd5200000-0xd52fffff]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.3: PCI bridge to [bus 0d-12]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.3:   bridge window [mem 0xd4200000-0xd51fffff]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.3:   bridge window [mem 0xd3100000-0xd40fffff 64bit pref]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.5: PCI bridge to [bus 13]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[Sal Kas 17 13:29:38 2015] pci 0000:00:1c.5:   bridge window [mem 0xd4100000-0xd41fffff 64bit pref]
[Sal Kas 17 13:29:38 2015] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[Sal Kas 17 13:29:38 2015] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[Sal Kas 17 13:29:38 2015] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[Sal Kas 17 13:29:38 2015] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff window]
[Sal Kas 17 13:29:38 2015] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[Sal Kas 17 13:29:38 2015] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
[Sal Kas 17 13:29:38 2015] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[Sal Kas 17 13:29:38 2015] pci_bus 0000:07: resource 1 [mem 0xd5200000-0xd52fffff]
[Sal Kas 17 13:29:38 2015] pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
[Sal Kas 17 13:29:38 2015] pci_bus 0000:0d: resource 1 [mem 0xd4200000-0xd51fffff]
[Sal Kas 17 13:29:38 2015] pci_bus 0000:0d: resource 2 [mem 0xd3100000-0xd40fffff 64bit pref]
[Sal Kas 17 13:29:38 2015] pci_bus 0000:13: resource 0 [io  0x2000-0x2fff]
[Sal Kas 17 13:29:38 2015] pci_bus 0000:13: resource 2 [mem 0xd4100000-0xd41fffff 64bit pref]
[Sal Kas 17 13:29:38 2015] NET: Registered protocol family 2
[Sal Kas 17 13:29:38 2015] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Sal Kas 17 13:29:38 2015] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Sal Kas 17 13:29:38 2015] TCP: Hash tables configured (established 8192 bind 8192)
[Sal Kas 17 13:29:38 2015] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Sal Kas 17 13:29:38 2015] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Sal Kas 17 13:29:38 2015] NET: Registered protocol family 1
[Sal Kas 17 13:29:38 2015] pci 0000:01:00.0: Video device with shadowed ROM
[Sal Kas 17 13:29:38 2015] PCI: CLS 64 bytes, default 64
[Sal Kas 17 13:29:38 2015] Trying to unpack rootfs image as initramfs...
[Sal Kas 17 13:29:38 2015] Freeing initrd memory: 31664K (f4218000 - f6104000)
[Sal Kas 17 13:29:38 2015] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[Sal Kas 17 13:29:38 2015] hw unit of domain pp0-core 2^-16 Joules
[Sal Kas 17 13:29:38 2015] hw unit of domain package 2^-16 Joules
[Sal Kas 17 13:29:38 2015] hw unit of domain pp1-gpu 2^-16 Joules
[Sal Kas 17 13:29:38 2015] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[Sal Kas 17 13:29:38 2015] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[Sal Kas 17 13:29:38 2015] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[Sal Kas 17 13:29:38 2015] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[Sal Kas 17 13:29:38 2015] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[Sal Kas 17 13:29:38 2015] Scanning for low memory corruption every 60 seconds
[Sal Kas 17 13:29:38 2015] futex hash table entries: 2048 (order: 5, 131072 bytes)
[Sal Kas 17 13:29:38 2015] Initialise system trusted keyring
[Sal Kas 17 13:29:38 2015] audit: initializing netlink subsys (disabled)
[Sal Kas 17 13:29:38 2015] audit: type=2000 audit(1447741774.804:1): initialized
[Sal Kas 17 13:29:38 2015] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[Sal Kas 17 13:29:38 2015] zpool: loaded
[Sal Kas 17 13:29:38 2015] zbud: loaded
[Sal Kas 17 13:29:38 2015] VFS: Disk quotas dquot_6.6.0
[Sal Kas 17 13:29:38 2015] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Sal Kas 17 13:29:38 2015] fuse init (API version 7.23)
[Sal Kas 17 13:29:38 2015] Key type big_key registered
[Sal Kas 17 13:29:38 2015] Key type asymmetric registered
[Sal Kas 17 13:29:38 2015] Asymmetric key parser 'x509' registered
[Sal Kas 17 13:29:38 2015] bounce: pool size: 64 pages
[Sal Kas 17 13:29:38 2015] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[Sal Kas 17 13:29:38 2015] io scheduler noop registered
[Sal Kas 17 13:29:38 2015] io scheduler deadline registered (default)
[Sal Kas 17 13:29:38 2015] io scheduler cfq registered
[Sal Kas 17 13:29:38 2015] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[Sal Kas 17 13:29:38 2015] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[Sal Kas 17 13:29:38 2015] intel_idle: MWAIT substates: 0x21120
[Sal Kas 17 13:29:38 2015] intel_idle: v0.4 model 0x2A
[Sal Kas 17 13:29:38 2015] intel_idle: lapic_timer_reliable_states 0xffffffff
[Sal Kas 17 13:29:38 2015] ACPI: AC Adapter [AC] (on-line)
[Sal Kas 17 13:29:38 2015] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[Sal Kas 17 13:29:38 2015] ACPI: Power Button [PWRB]
[Sal Kas 17 13:29:38 2015] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[Sal Kas 17 13:29:38 2015] ACPI: Lid Switch [LID0]
[Sal Kas 17 13:29:38 2015] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[Sal Kas 17 13:29:38 2015] ACPI: Power Button [PWRF]
[Sal Kas 17 13:29:38 2015] thermal LNXTHERM:00: registered as thermal_zone0
[Sal Kas 17 13:29:38 2015] ACPI: Thermal Zone [THRM] (75 C)
[Sal Kas 17 13:29:38 2015] GHES: HEST is not enabled!
[Sal Kas 17 13:29:38 2015] isapnp: Scanning for PnP cards...
[Sal Kas 17 13:29:38 2015] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[Sal Kas 17 13:29:38 2015] Linux agpgart interface v0.103
[Sal Kas 17 13:29:38 2015] brd: module loaded
[Sal Kas 17 13:29:38 2015] loop: module loaded
[Sal Kas 17 13:29:38 2015] libphy: Fixed MDIO Bus: probed
[Sal Kas 17 13:29:38 2015] tun: Universal TUN/TAP device driver, 1.6
[Sal Kas 17 13:29:38 2015] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[Sal Kas 17 13:29:38 2015] PPP generic driver version 2.4.2
[Sal Kas 17 13:29:38 2015] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[Sal Kas 17 13:29:38 2015] ehci-pci: EHCI PCI platform driver
[Sal Kas 17 13:29:38 2015] ehci-pci 0000:00:1a.0: EHCI Host Controller
[Sal Kas 17 13:29:38 2015] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[Sal Kas 17 13:29:38 2015] ehci-pci 0000:00:1a.0: debug port 2
[Sal Kas 17 13:29:38 2015] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[Sal Kas 17 13:29:38 2015] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd5309000
[Sal Kas 17 13:29:38 2015] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[Sal Kas 17 13:29:38 2015] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Sal Kas 17 13:29:38 2015] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Sal Kas 17 13:29:38 2015] usb usb1: Product: EHCI Host Controller
[Sal Kas 17 13:29:38 2015] usb usb1: Manufacturer: Linux 4.2.0-18-generic ehci_hcd
[Sal Kas 17 13:29:38 2015] usb usb1: SerialNumber: 0000:00:1a.0
[Sal Kas 17 13:29:38 2015] hub 1-0:1.0: USB hub found
[Sal Kas 17 13:29:38 2015] hub 1-0:1.0: 2 ports detected
[Sal Kas 17 13:29:38 2015] ehci-pci 0000:00:1d.0: EHCI Host Controller
[Sal Kas 17 13:29:38 2015] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[Sal Kas 17 13:29:38 2015] ehci-pci 0000:00:1d.0: debug port 2
[Sal Kas 17 13:29:38 2015] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[Sal Kas 17 13:29:38 2015] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd5308000
[Sal Kas 17 13:29:38 2015] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[Sal Kas 17 13:29:38 2015] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[Sal Kas 17 13:29:38 2015] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Sal Kas 17 13:29:38 2015] usb usb2: Product: EHCI Host Controller
[Sal Kas 17 13:29:38 2015] usb usb2: Manufacturer: Linux 4.2.0-18-generic ehci_hcd
[Sal Kas 17 13:29:38 2015] usb usb2: SerialNumber: 0000:00:1d.0
[Sal Kas 17 13:29:38 2015] hub 2-0:1.0: USB hub found
[Sal Kas 17 13:29:38 2015] hub 2-0:1.0: 2 ports detected
[Sal Kas 17 13:29:38 2015] ehci-platform: EHCI generic platform driver
[Sal Kas 17 13:29:38 2015] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[Sal Kas 17 13:29:38 2015] ohci-pci: OHCI PCI platform driver
[Sal Kas 17 13:29:38 2015] ohci-platform: OHCI generic platform driver
[Sal Kas 17 13:29:38 2015] uhci_hcd: USB Universal Host Controller Interface driver
[Sal Kas 17 13:29:38 2015] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[Sal Kas 17 13:29:38 2015] serio: i8042 KBD port at 0x60,0x64 irq 1
[Sal Kas 17 13:29:38 2015] serio: i8042 AUX port at 0x60,0x64 irq 12
[Sal Kas 17 13:29:38 2015] mousedev: PS/2 mouse device common for all mice
[Sal Kas 17 13:29:38 2015] rtc_cmos 00:01: RTC can wake from S4
[Sal Kas 17 13:29:38 2015] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[Sal Kas 17 13:29:38 2015] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[Sal Kas 17 13:29:38 2015] i2c /dev entries driver
[Sal Kas 17 13:29:38 2015] device-mapper: uevent: version 1.0.3
[Sal Kas 17 13:29:38 2015] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[Sal Kas 17 13:29:38 2015] platform eisa.0: Probing EISA bus 0
[Sal Kas 17 13:29:38 2015] platform eisa.0: EISA: Cannot allocate resource for mainboard
[Sal Kas 17 13:29:38 2015] platform eisa.0: Cannot allocate resource for EISA slot 1
[Sal Kas 17 13:29:38 2015] platform eisa.0: Cannot allocate resource for EISA slot 2
[Sal Kas 17 13:29:38 2015] platform eisa.0: Cannot allocate resource for EISA slot 3
[Sal Kas 17 13:29:38 2015] platform eisa.0: Cannot allocate resource for EISA slot 4
[Sal Kas 17 13:29:38 2015] platform eisa.0: Cannot allocate resource for EISA slot 5
[Sal Kas 17 13:29:38 2015] platform eisa.0: Cannot allocate resource for EISA slot 6
[Sal Kas 17 13:29:38 2015] platform eisa.0: Cannot allocate resource for EISA slot 7
[Sal Kas 17 13:29:38 2015] platform eisa.0: Cannot allocate resource for EISA slot 8
[Sal Kas 17 13:29:38 2015] platform eisa.0: EISA: Detected 0 cards
[Sal Kas 17 13:29:38 2015] cpufreq-nforce2: No nForce2 chipset.
[Sal Kas 17 13:29:38 2015] Intel P-state driver initializing.
[Sal Kas 17 13:29:38 2015] ledtrig-cpu: registered to indicate activity on CPUs
[Sal Kas 17 13:29:38 2015] PCCT header not found.
[Sal Kas 17 13:29:38 2015] NET: Registered protocol family 10
[Sal Kas 17 13:29:38 2015] NET: Registered protocol family 17
[Sal Kas 17 13:29:38 2015] Key type dns_resolver registered
[Sal Kas 17 13:29:38 2015] Using IPI No-Shortcut mode
[Sal Kas 17 13:29:38 2015] Loading compiled-in X.509 certificates
[Sal Kas 17 13:29:38 2015] Loaded X.509 cert 'Build time autogenerated kernel key: 4a9369b374fcb561ad6835bdaadb20771ff50bbd'
[Sal Kas 17 13:29:38 2015] registered taskstats version 1
[Sal Kas 17 13:29:38 2015] zswap: loading zswap
[Sal Kas 17 13:29:38 2015] zswap: using zbud pool
[Sal Kas 17 13:29:38 2015] zswap: using lzo compressor
[Sal Kas 17 13:29:38 2015] Key type trusted registered
[Sal Kas 17 13:29:38 2015] Key type encrypted registered
[Sal Kas 17 13:29:38 2015] AppArmor: AppArmor sha1 policy hashing enabled
[Sal Kas 17 13:29:38 2015] ima: No TPM chip found, activating TPM-bypass!
[Sal Kas 17 13:29:38 2015] evm: HMAC attrs: 0x1
[Sal Kas 17 13:29:38 2015]   Magic number: 7:867:468
[Sal Kas 17 13:29:38 2015] rtc_cmos 00:01: setting system clock to 2015-11-17 06:29:35 UTC (1447741775)
[Sal Kas 17 13:29:38 2015] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[Sal Kas 17 13:29:38 2015] EDD information not available.
[Sal Kas 17 13:29:38 2015] PM: Hibernation image not present or could not be loaded.
[Sal Kas 17 13:29:38 2015] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[Sal Kas 17 13:29:39 2015] ACPI: Battery Slot [BAT0] (battery present)
[Sal Kas 17 13:29:39 2015] usb 1-1: new high-speed USB device number 2 using ehci-pci
[Sal Kas 17 13:29:39 2015] usb 2-1: new high-speed USB device number 2 using ehci-pci
[Sal Kas 17 13:29:39 2015] isapnp: No Plug & Play device found
[Sal Kas 17 13:29:39 2015] Freeing unused kernel memory: 928K (c1b14000 - c1bfc000)
[Sal Kas 17 13:29:39 2015] Write protecting the kernel text: 7576k
[Sal Kas 17 13:29:39 2015] Write protecting the kernel read-only data: 3024k
[Sal Kas 17 13:29:39 2015] NX-protecting the kernel data: 4712k
[Sal Kas 17 13:29:39 2015] random: systemd-udevd urandom read with 9 bits of entropy available
[Sal Kas 17 13:29:39 2015] ACPI: Video Device [DGPU] (multi-head: yes  rom: no  post: no)
[Sal Kas 17 13:29:39 2015] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[Sal Kas 17 13:29:39 2015] r8169 0000:13:00.0: can't disable ASPM; OS doesn't have ASPM control
[Sal Kas 17 13:29:39 2015] ahci 0000:00:1f.2: version 3.0
[Sal Kas 17 13:29:39 2015] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[Sal Kas 17 13:29:39 2015] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sal Kas 17 13:29:39 2015] hub 1-1:1.0: USB hub found
[Sal Kas 17 13:29:39 2015] hub 1-1:1.0: 6 ports detected
[Sal Kas 17 13:29:39 2015] rtsx_pci 0000:0d:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 25
[Sal Kas 17 13:29:39 2015] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x9 impl SATA mode
[Sal Kas 17 13:29:39 2015] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[Sal Kas 17 13:29:39 2015] r8169 0000:13:00.0 eth0: RTL8168e/8111e at 0xf8474000, 78:84:3c:ff:70:a1, XID 0c200000 IRQ 27
[Sal Kas 17 13:29:39 2015] r8169 0000:13:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[Sal Kas 17 13:29:39 2015] scsi host0: ahci
[Sal Kas 17 13:29:39 2015] scsi host1: ahci
[Sal Kas 17 13:29:39 2015] scsi host2: ahci
[Sal Kas 17 13:29:39 2015] scsi host3: ahci
[Sal Kas 17 13:29:39 2015] scsi host4: ahci
[Sal Kas 17 13:29:39 2015] scsi host5: ahci
[Sal Kas 17 13:29:39 2015] ata1: SATA max UDMA/133 abar m2048@0xd5307000 port 0xd5307100 irq 26
[Sal Kas 17 13:29:39 2015] ata2: DUMMY
[Sal Kas 17 13:29:39 2015] ata3: DUMMY
[Sal Kas 17 13:29:39 2015] ata4: SATA max UDMA/133 abar m2048@0xd5307000 port 0xd5307280 irq 26
[Sal Kas 17 13:29:39 2015] ata5: DUMMY
[Sal Kas 17 13:29:39 2015] ata6: DUMMY
[Sal Kas 17 13:29:39 2015] acpi device:22: registered as cooling_device4
[Sal Kas 17 13:29:39 2015] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input6
[Sal Kas 17 13:29:39 2015] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[Sal Kas 17 13:29:39 2015] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sal Kas 17 13:29:39 2015] hub 2-1:1.0: USB hub found
[Sal Kas 17 13:29:39 2015] hub 2-1:1.0: 6 ports detected
[Sal Kas 17 13:29:39 2015] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[Sal Kas 17 13:29:39 2015] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Sal Kas 17 13:29:39 2015] ata1.00: ATA-8: ST9320423AS, 0006HPM1, max UDMA/100
[Sal Kas 17 13:29:39 2015] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[Sal Kas 17 13:29:39 2015] ata4.00: ATAPI: MATSHITADVD-RAM UJ8B0, 1.00, max UDMA/100
[Sal Kas 17 13:29:39 2015] ata1.00: configured for UDMA/100
[Sal Kas 17 13:29:39 2015] scsi 0:0:0:0: Direct-Access     ATA      ST9320423AS      HPM1 PQ: 0 ANSI: 5
[Sal Kas 17 13:29:39 2015] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[Sal Kas 17 13:29:39 2015] sd 0:0:0:0: [sda] Write Protect is off
[Sal Kas 17 13:29:39 2015] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Sal Kas 17 13:29:39 2015] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Sal Kas 17 13:29:39 2015] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Sal Kas 17 13:29:39 2015] ata4.00: configured for UDMA/100
[Sal Kas 17 13:29:39 2015] scsi 3:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8B0    1.00 PQ: 0 ANSI: 5
[Sal Kas 17 13:29:39 2015] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[Sal Kas 17 13:29:39 2015] cdrom: Uniform CD-ROM driver Revision: 3.20
[Sal Kas 17 13:29:39 2015] sr 3:0:0:0: Attached scsi CD-ROM sr0
[Sal Kas 17 13:29:39 2015] sr 3:0:0:0: Attached scsi generic sg1 type 5
[Sal Kas 17 13:29:39 2015] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[Sal Kas 17 13:29:39 2015] usb 2-1.2: new low-speed USB device number 3 using ehci-pci
[Sal Kas 17 13:29:39 2015]  sda: sda1 sda2
[Sal Kas 17 13:29:39 2015] sd 0:0:0:0: [sda] Attached SCSI disk
[Sal Kas 17 13:29:39 2015] tsc: Refined TSC clocksource calibration: 2494.334 MHz
[Sal Kas 17 13:29:39 2015] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45126d86, max_idle_ns: 440795256522 ns
[Sal Kas 17 13:29:39 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 13:29:39 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 13:29:39 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 13:29:39 2015] hidraw: raw HID events driver (C) Jiri Kosina
[Sal Kas 17 13:29:39 2015] usbcore: registered new interface driver usbhid
[Sal Kas 17 13:29:39 2015] usbhid: USB HID core driver
[Sal Kas 17 13:29:39 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0001/input/input7
[Sal Kas 17 13:29:39 2015] hid-generic 0003:0000:0538.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 13:29:39 2015] usb 1-1.2: New USB device found, idVendor=04f2, idProduct=b28a
[Sal Kas 17 13:29:39 2015] usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[Sal Kas 17 13:29:39 2015] usb 1-1.2: Product: Sony Visual Communication Camera
[Sal Kas 17 13:29:39 2015] usb 1-1.2: Manufacturer: Chicony Electronics Co., Ltd.
[Sal Kas 17 13:29:39 2015] usb 1-1.2: SerialNumber: Sony Visual Communication Camera
[Sal Kas 17 13:29:39 2015] usb 1-1.5: new full-speed USB device number 4 using ehci-pci
[Sal Kas 17 13:29:40 2015] usb 1-1.5: device descriptor read/64, error -32
[Sal Kas 17 13:29:40 2015] usb 1-1.5: New USB device found, idVendor=0cf3, idProduct=3005
[Sal Kas 17 13:29:40 2015] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sal Kas 17 13:29:40 2015] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input8
[Sal Kas 17 13:29:40 2015] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input5
[Sal Kas 17 13:29:40 2015] clocksource: Switched to clocksource tsc
[Sal Kas 17 13:29:45 2015] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[Sal Kas 17 13:29:45 2015] random: nonblocking pool is initialized
[Sal Kas 17 13:29:46 2015] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[Sal Kas 17 13:29:46 2015] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[Sal Kas 17 13:29:46 2015] systemd[1]: Detected architecture x86.
[Sal Kas 17 13:29:46 2015] systemd[1]: Set hostname to <tthacktt>.
[Sal Kas 17 13:29:48 2015] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[Sal Kas 17 13:29:48 2015] systemd[1]: Reached target User and Group Name Lookups.
[Sal Kas 17 13:29:48 2015] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[Sal Kas 17 13:29:48 2015] systemd[1]: Created slice Root Slice.
[Sal Kas 17 13:29:48 2015] systemd[1]: Created slice User and Session Slice.
[Sal Kas 17 13:29:48 2015] systemd[1]: Listening on Journal Audit Socket.
[Sal Kas 17 13:29:48 2015] systemd[1]: Listening on udev Control Socket.
[Sal Kas 17 13:29:48 2015] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[Sal Kas 17 13:29:48 2015] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[Sal Kas 17 13:29:48 2015] systemd[1]: Created slice System Slice.
[Sal Kas 17 13:29:48 2015] systemd[1]: Starting Increase datagram queue length...
[Sal Kas 17 13:29:48 2015] systemd[1]: Created slice system-getty.slice.
[Sal Kas 17 13:29:48 2015] systemd[1]: Listening on udev Kernel Socket.
[Sal Kas 17 13:29:48 2015] systemd[1]: Listening on fsck to fsckd communication Socket.
[Sal Kas 17 13:29:48 2015] systemd[1]: Listening on Journal Socket.
[Sal Kas 17 13:29:48 2015] systemd[1]: Starting Load Kernel Modules...
[Sal Kas 17 13:29:48 2015] systemd[1]: Mounting Debug File System...
[Sal Kas 17 13:29:48 2015] systemd[1]: Mounting Huge Pages File System...
[Sal Kas 17 13:29:48 2015] systemd[1]: Mounting POSIX Message Queue File System...
[Sal Kas 17 13:29:48 2015] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[Sal Kas 17 13:29:48 2015] systemd[1]: Started Braille Device Support.
[Sal Kas 17 13:29:48 2015] systemd[1]: Starting Uncomplicated firewall...
[Sal Kas 17 13:29:48 2015] systemd[1]: Starting udev Coldplug all Devices...
[Sal Kas 17 13:29:48 2015] systemd[1]: Started Read required files in advance.
[Sal Kas 17 13:29:48 2015] systemd[1]: Starting Setup Virtual Console...
[Sal Kas 17 13:29:48 2015] systemd[1]: Reached target Remote File Systems (Pre).
[Sal Kas 17 13:29:48 2015] systemd[1]: Reached target Encrypted Volumes.
[Sal Kas 17 13:29:48 2015] systemd[1]: Listening on Journal Socket (/dev/log).
[Sal Kas 17 13:29:48 2015] systemd[1]: Reached target Slices.
[Sal Kas 17 13:29:48 2015] systemd[1]: Started Setup Virtual Console.
[Sal Kas 17 13:29:48 2015] systemd[1]: Started Uncomplicated firewall.
[Sal Kas 17 13:29:48 2015] systemd[1]: Started Create list of required static device nodes for the current kernel.
[Sal Kas 17 13:29:48 2015] systemd[1]: Starting Create Static Device Nodes in /dev...
[Sal Kas 17 13:29:48 2015] systemd[1]: Started udev Coldplug all Devices.
[Sal Kas 17 13:29:49 2015] systemd[1]: Mounted Debug File System.
[Sal Kas 17 13:29:49 2015] systemd[1]: Mounted Huge Pages File System.
[Sal Kas 17 13:29:49 2015] systemd[1]: Mounted POSIX Message Queue File System.
[Sal Kas 17 13:29:49 2015] systemd[1]: Started Increase datagram queue length.
[Sal Kas 17 13:29:49 2015] systemd[1]: Listening on Syslog Socket.
[Sal Kas 17 13:29:49 2015] systemd[1]: Starting Journal Service...
[Sal Kas 17 13:29:49 2015] lp: driver loaded but no devices found
[Sal Kas 17 13:29:49 2015] ppdev: user-space parallel port driver
[Sal Kas 17 13:29:49 2015] systemd[1]: Started Load Kernel Modules.
[Sal Kas 17 13:29:49 2015] systemd[1]: Starting Apply Kernel Variables...
[Sal Kas 17 13:29:49 2015] systemd[1]: Mounting FUSE Control File System...
[Sal Kas 17 13:29:49 2015] systemd[1]: Mounted FUSE Control File System.
[Sal Kas 17 13:29:49 2015] systemd[1]: Started Apply Kernel Variables.
[Sal Kas 17 13:29:49 2015] systemd[1]: Started Journal Service.
[Sal Kas 17 13:29:51 2015] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[Sal Kas 17 13:29:51 2015] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150619/utaddress-254)
[Sal Kas 17 13:29:51 2015] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[Sal Kas 17 13:29:51 2015] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[Sal Kas 17 13:29:51 2015] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[Sal Kas 17 13:29:51 2015] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[Sal Kas 17 13:29:51 2015] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[Sal Kas 17 13:29:51 2015] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[Sal Kas 17 13:29:51 2015] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[Sal Kas 17 13:29:51 2015] lpc_ich: Resource conflict(s) found affecting gpio_ich
[Sal Kas 17 13:29:51 2015] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[Sal Kas 17 13:29:51 2015] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input9
[Sal Kas 17 13:29:51 2015] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input10
[Sal Kas 17 13:29:52 2015] sony_laptop: SNC setup done.
[Sal Kas 17 13:29:52 2015] systemd-journald[248]: Received request to flush runtime journal from PID 1
[Sal Kas 17 13:29:52 2015] [drm] Initialized drm 1.1.0 20060810
[Sal Kas 17 13:29:52 2015] snd_hda_intel 0000:01:00.1: Disabling MSI
[Sal Kas 17 13:29:52 2015] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[Sal Kas 17 13:29:53 2015] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[Sal Kas 17 13:29:53 2015] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[Sal Kas 17 13:29:53 2015] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[Sal Kas 17 13:29:53 2015] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[Sal Kas 17 13:29:53 2015] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[Sal Kas 17 13:29:53 2015] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[Sal Kas 17 13:29:53 2015] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[Sal Kas 17 13:29:53 2015] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1b
[Sal Kas 17 13:29:53 2015] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[Sal Kas 17 13:29:53 2015] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[Sal Kas 17 13:29:53 2015] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[Sal Kas 17 13:29:53 2015] intel_rapl: Found RAPL domain package
[Sal Kas 17 13:29:53 2015] intel_rapl: Found RAPL domain core
[Sal Kas 17 13:29:53 2015] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[Sal Kas 17 13:29:53 2015] ath: phy0: ASPM enabled: 0x43
[Sal Kas 17 13:29:53 2015] ath: EEPROM regdomain: 0x65
[Sal Kas 17 13:29:53 2015] ath: EEPROM indicates we should expect a direct regpair map
[Sal Kas 17 13:29:53 2015] ath: Country alpha2 being used: 00
[Sal Kas 17 13:29:53 2015] ath: Regpair used: 0x65
[Sal Kas 17 13:29:53 2015] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[Sal Kas 17 13:29:53 2015] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf9000000, irq=16
[Sal Kas 17 13:29:53 2015] nvidia: module license 'NVIDIA' taints kernel.
[Sal Kas 17 13:29:53 2015] Disabling lock debugging due to kernel taint
[Sal Kas 17 13:29:53 2015] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[Sal Kas 17 13:29:53 2015] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[Sal Kas 17 13:29:53 2015] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[Sal Kas 17 13:29:53 2015] NVRM: loading NVIDIA UNIX x86 Kernel Module  352.41  Fri Aug 21 22:11:31 PDT 2015
[Sal Kas 17 13:29:54 2015] cfg80211: World regulatory domain updated:
[Sal Kas 17 13:29:54 2015] cfg80211:  DFS Master region: unset
[Sal Kas 17 13:29:54 2015] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[Sal Kas 17 13:29:54 2015] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:29:54 2015] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:29:54 2015] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:29:54 2015] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:29:54 2015] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[Sal Kas 17 13:29:54 2015] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[Sal Kas 17 13:29:54 2015] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:29:54 2015] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[Sal Kas 17 13:29:54 2015] Bluetooth: Core ver 2.20
[Sal Kas 17 13:29:54 2015] NET: Registered protocol family 31
[Sal Kas 17 13:29:54 2015] Bluetooth: HCI device and connection manager initialized
[Sal Kas 17 13:29:54 2015] Bluetooth: HCI socket layer initialized
[Sal Kas 17 13:29:54 2015] Bluetooth: L2CAP socket layer initialized
[Sal Kas 17 13:29:54 2015] Bluetooth: SCO socket layer initialized
[Sal Kas 17 13:29:54 2015] media: Linux media interface: v0.10
[Sal Kas 17 13:29:54 2015] Linux video capture interface: v2.00
[Sal Kas 17 13:29:55 2015] usbcore: registered new interface driver btusb
[Sal Kas 17 13:29:55 2015] uvcvideo: Found UVC 1.00 device Sony Visual Communication Camera (04f2:b28a)
[Sal Kas 17 13:29:55 2015] input: Sony Visual Communication Camer as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input14
[Sal Kas 17 13:29:55 2015] usbcore: registered new interface driver uvcvideo
[Sal Kas 17 13:29:55 2015] USB Video Class driver (1.1.1)
[Sal Kas 17 13:29:55 2015] audit: type=1400 audit(1447741792.420:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=598 comm="apparmor_parser"
[Sal Kas 17 13:29:55 2015] audit: type=1400 audit(1447741792.420:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=598 comm="apparmor_parser"
[Sal Kas 17 13:29:55 2015] audit: type=1400 audit(1447741792.460:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=598 comm="apparmor_parser"
[Sal Kas 17 13:29:55 2015] audit: type=1400 audit(1447741792.460:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=598 comm="apparmor_parser"
[Sal Kas 17 13:29:55 2015] audit: type=1400 audit(1447741792.460:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=598 comm="apparmor_parser"
[Sal Kas 17 13:29:55 2015] audit: type=1400 audit(1447741792.460:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=598 comm="apparmor_parser"
[Sal Kas 17 13:29:56 2015] audit: type=1400 audit(1447741792.692:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=598 comm="apparmor_parser"
[Sal Kas 17 13:29:56 2015] audit: type=1400 audit(1447741792.692:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=598 comm="apparmor_parser"
[Sal Kas 17 13:29:56 2015] audit: type=1400 audit(1447741792.692:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=598 comm="apparmor_parser"
[Sal Kas 17 13:29:56 2015] audit: type=1400 audit(1447741792.692:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=598 comm="apparmor_parser"
[Sal Kas 17 13:31:18 2015] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Sal Kas 17 13:31:18 2015] Bluetooth: BNEP filters: protocol multicast
[Sal Kas 17 13:31:18 2015] Bluetooth: BNEP socket layer initialized
[Sal Kas 17 13:31:18 2015] cgroup: new mount options do not match the existing superblock, will be ignored
[Sal Kas 17 13:31:20 2015] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[Sal Kas 17 13:31:20 2015] r8169 0000:13:00.0 eth0: link down
[Sal Kas 17 13:31:20 2015] r8169 0000:13:00.0 eth0: link down
[Sal Kas 17 13:31:20 2015] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[Sal Kas 17 13:31:20 2015] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[Sal Kas 17 13:31:20 2015] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[Sal Kas 17 13:31:20 2015] vboxdrv: Found 4 processor cores
[Sal Kas 17 13:31:20 2015] vboxdrv: TSC mode is Invariant, tentative frequency 2494328590 Hz
[Sal Kas 17 13:31:20 2015] vboxdrv: Successfully loaded version 5.0.8 (interface 0x00240000)
[Sal Kas 17 13:31:20 2015] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[Sal Kas 17 13:31:20 2015] VBoxNetFlt: Successfully started.
[Sal Kas 17 13:31:20 2015] VBoxNetAdp: Successfully started.
[Sal Kas 17 13:31:20 2015] VBoxPciLinuxInit
[Sal Kas 17 13:31:20 2015] vboxpci: IOMMU not found (not registered)
[Sal Kas 17 13:31:21 2015] wlan0: authenticate with e8:de:27:51:59:15
[Sal Kas 17 13:31:21 2015] wlan0: send auth to e8:de:27:51:59:15 (try 1/3)
[Sal Kas 17 13:31:21 2015] wlan0: authenticated
[Sal Kas 17 13:31:21 2015] wlan0: associate with e8:de:27:51:59:15 (try 1/3)
[Sal Kas 17 13:31:21 2015] wlan0: RX AssocResp from e8:de:27:51:59:15 (capab=0x411 status=0 aid=2)
[Sal Kas 17 13:31:21 2015] wlan0: associated
[Sal Kas 17 13:31:21 2015] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[Sal Kas 17 13:31:21 2015] ath: EEPROM regdomain: 0x8318
[Sal Kas 17 13:31:21 2015] ath: EEPROM indicates we should expect a country code
[Sal Kas 17 13:31:21 2015] ath: doing EEPROM country->regdmn map search
[Sal Kas 17 13:31:21 2015] ath: country maps to regdmn code: 0x36
[Sal Kas 17 13:31:21 2015] ath: Country alpha2 being used: TR
[Sal Kas 17 13:31:21 2015] ath: Regpair used: 0x36
[Sal Kas 17 13:31:21 2015] ath: regdomain 0x8318 dynamically updated by country IE
[Sal Kas 17 13:31:21 2015] cfg80211: Regulatory domain changed to country: TR
[Sal Kas 17 13:31:21 2015] cfg80211:  DFS Master region: ETSI
[Sal Kas 17 13:31:21 2015] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[Sal Kas 17 13:31:21 2015] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:31:21 2015] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:31:21 2015] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[Sal Kas 17 13:31:21 2015] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[Sal Kas 17 13:31:21 2015] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[Sal Kas 17 13:31:22 2015] r8169 0000:13:00.0 eth0: link up
[Sal Kas 17 13:31:22 2015] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[Sal Kas 17 13:31:27 2015] Bluetooth: RFCOMM TTY layer initialized
[Sal Kas 17 13:31:27 2015] Bluetooth: RFCOMM socket layer initialized
[Sal Kas 17 13:31:27 2015] Bluetooth: RFCOMM ver 1.11
[Sal Kas 17 13:31:28 2015] wlan0: deauthenticated from e8:de:27:51:59:15 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[Sal Kas 17 13:31:28 2015] cfg80211: World regulatory domain updated:
[Sal Kas 17 13:31:28 2015] cfg80211:  DFS Master region: unset
[Sal Kas 17 13:31:28 2015] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[Sal Kas 17 13:31:28 2015] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:31:28 2015] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:31:28 2015] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:31:28 2015] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:31:28 2015] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[Sal Kas 17 13:31:28 2015] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[Sal Kas 17 13:31:28 2015] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:31:28 2015] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[Sal Kas 17 13:31:28 2015] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[Sal Kas 17 13:31:29 2015] wlan0: authenticate with e8:de:27:51:59:15
[Sal Kas 17 13:31:29 2015] wlan0: send auth to e8:de:27:51:59:15 (try 1/3)
[Sal Kas 17 13:31:29 2015] wlan0: authenticated
[Sal Kas 17 13:31:29 2015] wlan0: associate with e8:de:27:51:59:15 (try 1/3)
[Sal Kas 17 13:31:29 2015] wlan0: RX AssocResp from e8:de:27:51:59:15 (capab=0x411 status=0 aid=2)
[Sal Kas 17 13:31:29 2015] wlan0: associated
[Sal Kas 17 13:31:29 2015] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[Sal Kas 17 13:31:29 2015] ath: EEPROM regdomain: 0x8318
[Sal Kas 17 13:31:29 2015] ath: EEPROM indicates we should expect a country code
[Sal Kas 17 13:31:29 2015] ath: doing EEPROM country->regdmn map search
[Sal Kas 17 13:31:29 2015] ath: country maps to regdmn code: 0x36
[Sal Kas 17 13:31:29 2015] ath: Country alpha2 being used: TR
[Sal Kas 17 13:31:29 2015] ath: Regpair used: 0x36
[Sal Kas 17 13:31:29 2015] ath: regdomain 0x8318 dynamically updated by country IE
[Sal Kas 17 13:31:29 2015] cfg80211: Regulatory domain changed to country: TR
[Sal Kas 17 13:31:29 2015] cfg80211:  DFS Master region: ETSI
[Sal Kas 17 13:31:29 2015] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[Sal Kas 17 13:31:29 2015] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:31:29 2015] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:31:29 2015] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[Sal Kas 17 13:31:29 2015] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[Sal Kas 17 13:31:29 2015] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[Sal Kas 17 13:31:36 2015] wlan0: deauthenticated from e8:de:27:51:59:15 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[Sal Kas 17 13:31:36 2015] cfg80211: World regulatory domain updated:
[Sal Kas 17 13:31:36 2015] cfg80211:  DFS Master region: unset
[Sal Kas 17 13:31:36 2015] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[Sal Kas 17 13:31:36 2015] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:31:36 2015] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:31:36 2015] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:31:36 2015] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:31:36 2015] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[Sal Kas 17 13:31:36 2015] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[Sal Kas 17 13:31:36 2015] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:31:36 2015] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[Sal Kas 17 13:31:45 2015] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[Sal Kas 17 13:31:57 2015] wlan0: authenticate with e8:de:27:51:59:15
[Sal Kas 17 13:31:57 2015] wlan0: send auth to e8:de:27:51:59:15 (try 1/3)
[Sal Kas 17 13:31:57 2015] wlan0: authenticated
[Sal Kas 17 13:31:57 2015] wlan0: associate with e8:de:27:51:59:15 (try 1/3)
[Sal Kas 17 13:31:57 2015] wlan0: RX AssocResp from e8:de:27:51:59:15 (capab=0x411 status=0 aid=2)
[Sal Kas 17 13:31:57 2015] wlan0: associated
[Sal Kas 17 13:31:57 2015] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[Sal Kas 17 13:31:57 2015] ath: EEPROM regdomain: 0x8318
[Sal Kas 17 13:31:57 2015] ath: EEPROM indicates we should expect a country code
[Sal Kas 17 13:31:57 2015] ath: doing EEPROM country->regdmn map search
[Sal Kas 17 13:31:57 2015] ath: country maps to regdmn code: 0x36
[Sal Kas 17 13:31:57 2015] ath: Country alpha2 being used: TR
[Sal Kas 17 13:31:57 2015] ath: Regpair used: 0x36
[Sal Kas 17 13:31:57 2015] ath: regdomain 0x8318 dynamically updated by country IE
[Sal Kas 17 13:31:57 2015] cfg80211: Regulatory domain changed to country: TR
[Sal Kas 17 13:31:57 2015] cfg80211:  DFS Master region: ETSI
[Sal Kas 17 13:31:57 2015] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[Sal Kas 17 13:31:57 2015] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:31:57 2015] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:31:57 2015] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[Sal Kas 17 13:31:57 2015] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[Sal Kas 17 13:31:57 2015] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[Sal Kas 17 13:32:04 2015] wlan0: deauthenticated from e8:de:27:51:59:15 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[Sal Kas 17 13:32:04 2015] cfg80211: World regulatory domain updated:
[Sal Kas 17 13:32:04 2015] cfg80211:  DFS Master region: unset
[Sal Kas 17 13:32:04 2015] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[Sal Kas 17 13:32:04 2015] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:32:04 2015] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:32:04 2015] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:32:04 2015] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:32:04 2015] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[Sal Kas 17 13:32:04 2015] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[Sal Kas 17 13:32:04 2015] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 13:32:04 2015] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[Sal Kas 17 13:32:10 2015] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[Sal Kas 17 13:32:33 2015] usb 2-1.2: USB disconnect, device number 3
[Sal Kas 17 13:32:34 2015] usb 2-1.2: new low-speed USB device number 4 using ehci-pci
[Sal Kas 17 13:32:34 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 13:32:34 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 13:32:34 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 13:32:34 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0002/input/input15
[Sal Kas 17 13:32:34 2015] hid-generic 0003:0000:0538.0002: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 13:32:36 2015] usb 2-1.2: USB disconnect, device number 4
[Sal Kas 17 13:32:36 2015] usb 2-1.2: new low-speed USB device number 5 using ehci-pci
[Sal Kas 17 13:32:37 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 13:32:37 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 13:32:37 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 13:32:37 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0003/input/input16
[Sal Kas 17 13:32:37 2015] hid-generic 0003:0000:0538.0003: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 13:32:49 2015] usb 2-1.2: USB disconnect, device number 5
[Sal Kas 17 13:32:49 2015] usb 2-1.2: new low-speed USB device number 6 using ehci-pci
[Sal Kas 17 13:32:49 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 13:32:49 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 13:32:49 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 13:32:49 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0004/input/input17
[Sal Kas 17 13:32:49 2015] hid-generic 0003:0000:0538.0004: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 14:01:52 2015] usb 2-1.2: USB disconnect, device number 6
[Sal Kas 17 14:01:52 2015] usb 2-1.2: new low-speed USB device number 8 using ehci-pci
[Sal Kas 17 14:01:52 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 14:01:52 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 14:01:52 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 14:01:52 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0005/input/input18
[Sal Kas 17 14:01:52 2015] hid-generic 0003:0000:0538.0005: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 14:02:22 2015] usb 2-1.1: new high-speed USB device number 9 using ehci-pci
[Sal Kas 17 14:02:22 2015] usb 2-1.1: New USB device found, idVendor=1058, idProduct=0748
[Sal Kas 17 14:02:22 2015] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[Sal Kas 17 14:02:22 2015] usb 2-1.1: Product: My Passport 0748
[Sal Kas 17 14:02:22 2015] usb 2-1.1: Manufacturer: Western Digital
[Sal Kas 17 14:02:22 2015] usb 2-1.1: SerialNumber: 575842314536325354443737
[Sal Kas 17 14:02:22 2015] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[Sal Kas 17 14:02:22 2015] scsi host6: usb-storage 2-1.1:1.0
[Sal Kas 17 14:02:22 2015] usbcore: registered new interface driver usb-storage
[Sal Kas 17 14:02:22 2015] usbcore: registered new interface driver uas
[Sal Kas 17 14:02:23 2015] scsi 6:0:0:0: Direct-Access     WD       My Passport 0748 1022 PQ: 0 ANSI: 6
[Sal Kas 17 14:02:23 2015] scsi 6:0:0:1: Enclosure         WD       SES Device       1022 PQ: 0 ANSI: 6
[Sal Kas 17 14:02:23 2015] sd 6:0:0:0: Attached scsi generic sg2 type 0
[Sal Kas 17 14:02:23 2015] scsi 6:0:0:1: Attached scsi generic sg3 type 13
[Sal Kas 17 14:02:23 2015] sd 6:0:0:0: [sdb] Spinning up disk...
[Sal Kas 17 14:02:24 2015] .ready
[Sal Kas 17 14:02:30 2015] sd 6:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB)
[Sal Kas 17 14:02:30 2015] sd 6:0:0:0: [sdb] Write Protect is off
[Sal Kas 17 14:02:30 2015] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
[Sal Kas 17 14:02:30 2015] sd 6:0:0:0: [sdb] No Caching mode page found
[Sal Kas 17 14:02:30 2015] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[Sal Kas 17 14:02:30 2015] ses 6:0:0:1: Attached Enclosure device
[Sal Kas 17 14:02:30 2015]  sdb: sdb1
[Sal Kas 17 14:02:30 2015] sd 6:0:0:0: [sdb] Attached SCSI disk
[Sal Kas 17 14:28:16 2015] usb 2-1.2: USB disconnect, device number 8
[Sal Kas 17 14:28:16 2015] usb 2-1.2: new low-speed USB device number 10 using ehci-pci
[Sal Kas 17 14:28:16 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 14:28:16 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 14:28:16 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 14:28:16 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0006/input/input19
[Sal Kas 17 14:28:16 2015] hid-generic 0003:0000:0538.0006: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 14:37:47 2015] usb 2-1.2: USB disconnect, device number 10
[Sal Kas 17 14:37:47 2015] usb 2-1.2: new low-speed USB device number 11 using ehci-pci
[Sal Kas 17 14:37:48 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 14:37:48 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 14:37:48 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 14:37:48 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0007/input/input20
[Sal Kas 17 14:37:48 2015] hid-generic 0003:0000:0538.0007: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 15:37:29 2015] usb 2-1.2: USB disconnect, device number 11
[Sal Kas 17 15:37:36 2015] usb 2-1.2: new low-speed USB device number 12 using ehci-pci
[Sal Kas 17 15:37:36 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 15:37:36 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 15:37:36 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 15:37:36 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0008/input/input21
[Sal Kas 17 15:37:36 2015] hid-generic 0003:0000:0538.0008: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 15:37:38 2015] usb 2-1.2: USB disconnect, device number 12
[Sal Kas 17 15:37:38 2015] usb 2-1.2: new low-speed USB device number 13 using ehci-pci
[Sal Kas 17 15:37:38 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 15:37:38 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 15:37:38 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 15:37:38 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0009/input/input22
[Sal Kas 17 15:37:38 2015] hid-generic 0003:0000:0538.0009: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 15:52:29 2015] perf interrupt took too long (2525 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[Sal Kas 17 16:13:43 2015] usb 2-1.2: USB disconnect, device number 13
[Sal Kas 17 16:13:43 2015] usb 2-1.2: new low-speed USB device number 14 using ehci-pci
[Sal Kas 17 16:13:43 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 16:13:43 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 16:13:43 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 16:13:43 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.000A/input/input23
[Sal Kas 17 16:13:43 2015] hid-generic 0003:0000:0538.000A: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 16:25:19 2015] usb 2-1.2: USB disconnect, device number 14
[Sal Kas 17 16:25:29 2015] usb 2-1.2: new low-speed USB device number 15 using ehci-pci
[Sal Kas 17 16:25:29 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 16:25:29 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 16:25:29 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 16:25:29 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.000B/input/input24
[Sal Kas 17 16:25:29 2015] hid-generic 0003:0000:0538.000B: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 16:25:35 2015] usb 2-1.2: USB disconnect, device number 15
[Sal Kas 17 16:25:41 2015] usb 2-1.2: new low-speed USB device number 16 using ehci-pci
[Sal Kas 17 16:25:41 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 16:25:41 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 16:25:41 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 16:25:41 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.000C/input/input25
[Sal Kas 17 16:25:41 2015] hid-generic 0003:0000:0538.000C: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 16:25:54 2015] usb 2-1.2: USB disconnect, device number 16
[Sal Kas 17 16:25:55 2015] usb 2-1.2: new low-speed USB device number 17 using ehci-pci
[Sal Kas 17 16:25:55 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 16:25:55 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 16:25:55 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 16:25:55 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.000D/input/input26
[Sal Kas 17 16:25:55 2015] hid-generic 0003:0000:0538.000D: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 16:25:58 2015] usb 2-1.2: USB disconnect, device number 17
[Sal Kas 17 16:25:59 2015] usb 2-1.2: new low-speed USB device number 18 using ehci-pci
[Sal Kas 17 16:25:59 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 16:25:59 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 16:25:59 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 16:25:59 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.000E/input/input27
[Sal Kas 17 16:25:59 2015] hid-generic 0003:0000:0538.000E: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 16:26:01 2015] usb 2-1.2: USB disconnect, device number 18
[Sal Kas 17 16:26:01 2015] usb 2-1.2: new low-speed USB device number 19 using ehci-pci
[Sal Kas 17 16:26:02 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 16:26:02 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 16:26:02 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 16:26:02 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.000F/input/input28
[Sal Kas 17 16:26:02 2015] hid-generic 0003:0000:0538.000F: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 17:30:36 2015] r8169 0000:13:00.0 eth0: link down
[Sal Kas 17 17:31:06 2015] usb 2-1.2: USB disconnect, device number 19
[Sal Kas 17 17:31:07 2015] usb 2-1.2: new low-speed USB device number 20 using ehci-pci
[Sal Kas 17 17:31:07 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 17:31:07 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 17:31:07 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 17:31:07 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0010/input/input29
[Sal Kas 17 17:31:07 2015] hid-generic 0003:0000:0538.0010: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 17:31:08 2015] usb 2-1.2: USB disconnect, device number 20
[Sal Kas 17 17:32:29 2015] usb 2-1.2: new low-speed USB device number 21 using ehci-pci
[Sal Kas 17 17:32:29 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 17:32:29 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 17:32:29 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 17:32:29 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0011/input/input30
[Sal Kas 17 17:32:29 2015] hid-generic 0003:0000:0538.0011: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 17:33:49 2015] usb 2-1.2: USB disconnect, device number 21
[Sal Kas 17 17:33:49 2015] usb 2-1.2: new low-speed USB device number 22 using ehci-pci
[Sal Kas 17 17:33:50 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 17:33:50 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 17:33:50 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 17:33:50 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0012/input/input31
[Sal Kas 17 17:33:50 2015] hid-generic 0003:0000:0538.0012: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 17:35:11 2015] wlan0: authenticate with e8:de:27:51:59:15
[Sal Kas 17 17:35:11 2015] wlan0: send auth to e8:de:27:51:59:15 (try 1/3)
[Sal Kas 17 17:35:11 2015] wlan0: authenticated
[Sal Kas 17 17:35:11 2015] wlan0: associate with e8:de:27:51:59:15 (try 1/3)
[Sal Kas 17 17:35:11 2015] wlan0: RX AssocResp from e8:de:27:51:59:15 (capab=0x411 status=0 aid=4)
[Sal Kas 17 17:35:11 2015] wlan0: associated
[Sal Kas 17 17:35:11 2015] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[Sal Kas 17 17:35:11 2015] ath: EEPROM regdomain: 0x8318
[Sal Kas 17 17:35:11 2015] ath: EEPROM indicates we should expect a country code
[Sal Kas 17 17:35:11 2015] ath: doing EEPROM country->regdmn map search
[Sal Kas 17 17:35:11 2015] ath: country maps to regdmn code: 0x36
[Sal Kas 17 17:35:11 2015] ath: Country alpha2 being used: TR
[Sal Kas 17 17:35:11 2015] ath: Regpair used: 0x36
[Sal Kas 17 17:35:11 2015] ath: regdomain 0x8318 dynamically updated by country IE
[Sal Kas 17 17:35:11 2015] cfg80211: Regulatory domain changed to country: TR
[Sal Kas 17 17:35:11 2015] cfg80211:  DFS Master region: ETSI
[Sal Kas 17 17:35:11 2015] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[Sal Kas 17 17:35:11 2015] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 17:35:11 2015] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 17:35:11 2015] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[Sal Kas 17 17:35:11 2015] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[Sal Kas 17 17:35:11 2015] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[Sal Kas 17 17:35:12 2015] usb 2-1.2: USB disconnect, device number 22
[Sal Kas 17 17:35:12 2015] usb 2-1.2: new low-speed USB device number 23 using ehci-pci
[Sal Kas 17 17:35:12 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 17:35:12 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 17:35:12 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 17:35:12 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0013/input/input32
[Sal Kas 17 17:35:12 2015] hid-generic 0003:0000:0538.0013: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 17:35:14 2015] usb 2-1.2: USB disconnect, device number 23
[Sal Kas 17 17:35:18 2015] wlan0: deauthenticated from e8:de:27:51:59:15 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[Sal Kas 17 17:35:18 2015] cfg80211: World regulatory domain updated:
[Sal Kas 17 17:35:18 2015] cfg80211:  DFS Master region: unset
[Sal Kas 17 17:35:18 2015] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[Sal Kas 17 17:35:18 2015] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 17:35:18 2015] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 17:35:18 2015] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 17:35:18 2015] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 17:35:18 2015] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[Sal Kas 17 17:35:18 2015] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[Sal Kas 17 17:35:18 2015] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 17:35:18 2015] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[Sal Kas 17 17:35:30 2015] usb 2-1.2: new low-speed USB device number 24 using ehci-pci
[Sal Kas 17 17:35:30 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 17:35:30 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 17:35:30 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 17:35:30 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0014/input/input33
[Sal Kas 17 17:35:30 2015] hid-generic 0003:0000:0538.0014: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 17:35:31 2015] usb 2-1.2: USB disconnect, device number 24
[Sal Kas 17 17:35:36 2015] wlan0: authenticate with e8:de:27:51:59:15
[Sal Kas 17 17:35:36 2015] wlan0: send auth to e8:de:27:51:59:15 (try 1/3)
[Sal Kas 17 17:35:36 2015] wlan0: authenticated
[Sal Kas 17 17:35:36 2015] wlan0: associate with e8:de:27:51:59:15 (try 1/3)
[Sal Kas 17 17:35:36 2015] wlan0: RX AssocResp from e8:de:27:51:59:15 (capab=0x411 status=0 aid=4)
[Sal Kas 17 17:35:36 2015] wlan0: associated
[Sal Kas 17 17:35:36 2015] ath: EEPROM regdomain: 0x8318
[Sal Kas 17 17:35:36 2015] ath: EEPROM indicates we should expect a country code
[Sal Kas 17 17:35:36 2015] ath: doing EEPROM country->regdmn map search
[Sal Kas 17 17:35:36 2015] ath: country maps to regdmn code: 0x36
[Sal Kas 17 17:35:36 2015] ath: Country alpha2 being used: TR
[Sal Kas 17 17:35:36 2015] ath: Regpair used: 0x36
[Sal Kas 17 17:35:36 2015] ath: regdomain 0x8318 dynamically updated by country IE
[Sal Kas 17 17:35:36 2015] cfg80211: Regulatory domain changed to country: TR
[Sal Kas 17 17:35:36 2015] cfg80211:  DFS Master region: ETSI
[Sal Kas 17 17:35:36 2015] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[Sal Kas 17 17:35:36 2015] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 17:35:36 2015] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 17:35:36 2015] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[Sal Kas 17 17:35:36 2015] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[Sal Kas 17 17:35:36 2015] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[Sal Kas 17 17:36:25 2015] usb 2-1.2: new low-speed USB device number 25 using ehci-pci
[Sal Kas 17 17:36:25 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 17:36:25 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 17:36:25 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 17:36:25 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0015/input/input34
[Sal Kas 17 17:36:25 2015] hid-generic 0003:0000:0538.0015: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 17:59:55 2015] perf interrupt took too long (5016 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[Sal Kas 17 18:05:31 2015] usb 2-1.2: USB disconnect, device number 25
[Sal Kas 17 18:05:31 2015] usb 2-1.2: new low-speed USB device number 26 using ehci-pci
[Sal Kas 17 18:05:32 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 18:05:32 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 18:05:32 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 18:05:32 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0016/input/input35
[Sal Kas 17 18:05:32 2015] hid-generic 0003:0000:0538.0016: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 18:24:13 2015] usb 2-1.2: USB disconnect, device number 26
[Sal Kas 17 18:24:14 2015] usb 2-1.2: new low-speed USB device number 27 using ehci-pci
[Sal Kas 17 18:24:14 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 18:24:14 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 18:24:14 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 18:24:14 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0017/input/input36
[Sal Kas 17 18:24:14 2015] hid-generic 0003:0000:0538.0017: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 18:25:13 2015] usb 2-1.2: USB disconnect, device number 27
[Sal Kas 17 18:25:13 2015] usb 2-1.2: new low-speed USB device number 28 using ehci-pci
[Sal Kas 17 18:25:14 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Sal Kas 17 18:25:14 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sal Kas 17 18:25:14 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Sal Kas 17 18:25:14 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0018/input/input37
[Sal Kas 17 18:25:14 2015] hid-generic 0003:0000:0538.0018: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Sal Kas 17 18:25:20 2015] r8169 0000:13:00.0 eth0: link up
[Sal Kas 17 18:25:28 2015] wlan0: deauthenticating from e8:de:27:51:59:15 by local choice (Reason: 3=DEAUTH_LEAVING)
[Sal Kas 17 18:25:28 2015] cfg80211: World regulatory domain updated:
[Sal Kas 17 18:25:28 2015] cfg80211:  DFS Master region: unset
[Sal Kas 17 18:25:28 2015] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[Sal Kas 17 18:25:28 2015] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 18:25:28 2015] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 18:25:28 2015] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 18:25:28 2015] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 18:25:28 2015] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[Sal Kas 17 18:25:28 2015] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[Sal Kas 17 18:25:28 2015] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[Sal Kas 17 18:25:28 2015] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
tthacktt@tthacktt:~$


[heartsmagic]

Değişmiyor deme, şu an çıktılarda sürekli fare ile ilgili bölümlerde büyük beklemeler var. Lütfen çıkartıp öyle aktar aynı komutun sonucunu.

[tthacktt]

Yani degismiyordan kastim acilis da verdigi hata ve acilis suresinin uzun surmesi. fare ciktiktan sonraki sonuc:

Kod Seç Genişlet

tthacktt@tthacktt:~$ dmesg -T
[Çrş Kas 18 22:12:02 2015] Initializing cgroup subsys cpuset
[Çrş Kas 18 22:12:02 2015] Initializing cgroup subsys cpu
[Çrş Kas 18 22:12:02 2015] Initializing cgroup subsys cpuacct
[Çrş Kas 18 22:12:02 2015] Linux version 4.2.0-18-generic (buildd@lgw01-37) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #22-Ubuntu SMP Fri Nov 6 23:32:28 UTC 2015 (Ubuntu 4.2.0-18.22-generic 4.2.3)
[Çrş Kas 18 22:12:02 2015] KERNEL supported cpus:
[Çrş Kas 18 22:12:02 2015]   Intel GenuineIntel
[Çrş Kas 18 22:12:02 2015]   AMD AuthenticAMD
[Çrş Kas 18 22:12:02 2015]   NSC Geode by NSC
[Çrş Kas 18 22:12:02 2015]   Cyrix CyrixInstead
[Çrş Kas 18 22:12:02 2015]   Centaur CentaurHauls
[Çrş Kas 18 22:12:02 2015]   Transmeta GenuineTMx86
[Çrş Kas 18 22:12:02 2015]   Transmeta TransmetaCPU
[Çrş Kas 18 22:12:02 2015]   UMC UMC UMC UMC
[Çrş Kas 18 22:12:02 2015] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[Çrş Kas 18 22:12:02 2015] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[Çrş Kas 18 22:12:02 2015] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[Çrş Kas 18 22:12:02 2015] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[Çrş Kas 18 22:12:02 2015] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[Çrş Kas 18 22:12:02 2015] x86/fpu: Using 'eager' FPU context switches.
[Çrş Kas 18 22:12:02 2015] e820: BIOS-provided physical RAM map:
[Çrş Kas 18 22:12:02 2015] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[Çrş Kas 18 22:12:02 2015] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[Çrş Kas 18 22:12:02 2015] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[Çrş Kas 18 22:12:02 2015] BIOS-e820: [mem 0x0000000000100000-0x00000000bf63efff] usable
[Çrş Kas 18 22:12:02 2015] BIOS-e820: [mem 0x00000000bf63f000-0x00000000bf6befff] reserved
[Çrş Kas 18 22:12:02 2015] BIOS-e820: [mem 0x00000000bf6bf000-0x00000000bf7befff] ACPI NVS
[Çrş Kas 18 22:12:02 2015] BIOS-e820: [mem 0x00000000bf7bf000-0x00000000bf7fefff] ACPI data
[Çrş Kas 18 22:12:02 2015] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[Çrş Kas 18 22:12:02 2015] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[Çrş Kas 18 22:12:02 2015] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[Çrş Kas 18 22:12:02 2015] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[Çrş Kas 18 22:12:02 2015] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[Çrş Kas 18 22:12:02 2015] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[Çrş Kas 18 22:12:02 2015] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[Çrş Kas 18 22:12:02 2015] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[Çrş Kas 18 22:12:02 2015] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[Çrş Kas 18 22:12:02 2015] BIOS-e820: [mem 0x0000000100000000-0x000000013f7fffff] usable
[Çrş Kas 18 22:12:02 2015] NX (Execute Disable) protection: active
[Çrş Kas 18 22:12:02 2015] SMBIOS 2.7 present.
[Çrş Kas 18 22:12:02 2015] DMI: Sony Corporation VPCEH38FH/VAIO, BIOS R0190Z9 11/17/2011
[Çrş Kas 18 22:12:02 2015] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[Çrş Kas 18 22:12:02 2015] e820: remove [mem 0x000a0000-0x000fffff] usable
[Çrş Kas 18 22:12:02 2015] e820: last_pfn = 0x13f800 max_arch_pfn = 0x1000000
[Çrş Kas 18 22:12:02 2015] MTRR default type: uncachable
[Çrş Kas 18 22:12:02 2015] MTRR fixed ranges enabled:
[Çrş Kas 18 22:12:02 2015]   00000-9FFFF write-back
[Çrş Kas 18 22:12:02 2015]   A0000-BFFFF uncachable
[Çrş Kas 18 22:12:02 2015]   C0000-FFFFF write-protect
[Çrş Kas 18 22:12:02 2015] MTRR variable ranges enabled:
[Çrş Kas 18 22:12:02 2015]   0 base 0FFE00000 mask FFFE00000 write-protect
[Çrş Kas 18 22:12:02 2015]   1 base 000000000 mask F80000000 write-back
[Çrş Kas 18 22:12:02 2015]   2 base 080000000 mask FC0000000 write-back
[Çrş Kas 18 22:12:02 2015]   3 base 0BF800000 mask FFF800000 uncachable
[Çrş Kas 18 22:12:02 2015]   4 base 100000000 mask FC0000000 write-back
[Çrş Kas 18 22:12:02 2015]   5 base 13F800000 mask FFF800000 uncachable
[Çrş Kas 18 22:12:02 2015]   6 disabled
[Çrş Kas 18 22:12:02 2015]   7 disabled
[Çrş Kas 18 22:12:02 2015]   8 disabled
[Çrş Kas 18 22:12:02 2015]   9 disabled
[Çrş Kas 18 22:12:02 2015] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[Çrş Kas 18 22:12:02 2015] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
[Çrş Kas 18 22:12:02 2015] Scanning 1 areas for low memory corruption
[Çrş Kas 18 22:12:02 2015] initial memory mapped: [mem 0x00000000-0x021fffff]
[Çrş Kas 18 22:12:02 2015] Base memory trampoline at [c0099000] 99000 size 16384
[Çrş Kas 18 22:12:02 2015] init_memory_mapping: [mem 0x00000000-0x000fffff]
[Çrş Kas 18 22:12:02 2015]  [mem 0x00000000-0x000fffff] page 4k
[Çrş Kas 18 22:12:02 2015] init_memory_mapping: [mem 0x37800000-0x379fffff]
[Çrş Kas 18 22:12:02 2015]  [mem 0x37800000-0x379fffff] page 2M
[Çrş Kas 18 22:12:02 2015] init_memory_mapping: [mem 0x20000000-0x377fffff]
[Çrş Kas 18 22:12:02 2015]  [mem 0x20000000-0x377fffff] page 2M
[Çrş Kas 18 22:12:02 2015] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[Çrş Kas 18 22:12:02 2015]  [mem 0x00100000-0x001fffff] page 4k
[Çrş Kas 18 22:12:02 2015]  [mem 0x00200000-0x1fffffff] page 2M
[Çrş Kas 18 22:12:02 2015] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[Çrş Kas 18 22:12:02 2015]  [mem 0x37a00000-0x37bfdfff] page 4k
[Çrş Kas 18 22:12:02 2015] BRK [0x01cdc000, 0x01cdcfff] PGTABLE
[Çrş Kas 18 22:12:02 2015] BRK [0x01cdd000, 0x01cddfff] PGTABLE
[Çrş Kas 18 22:12:02 2015] RAMDISK: [mem 0x34218000-0x36103fff]
[Çrş Kas 18 22:12:02 2015] ACPI: Early table checksum verification disabled
[Çrş Kas 18 22:12:02 2015] ACPI: RSDP 0x00000000000FE020 000024 (v02 Sony  )
[Çrş Kas 18 22:12:02 2015] ACPI: XSDT 0x00000000BF7FE120 000084 (v01 Sony   VAIO     20111117      01000013)
[Çrş Kas 18 22:12:02 2015] ACPI: FACP 0x00000000BF7FC000 0000F4 (v04 Sony   VAIO     20111117 INTL 20061109)
[Çrş Kas 18 22:12:02 2015] ACPI: DSDT 0x00000000BF7F1000 007907 (v01 Sony   VAIO     20111117 INTL 20061109)
[Çrş Kas 18 22:12:02 2015] ACPI: FACS 0x00000000BF76E000 000040
[Çrş Kas 18 22:12:02 2015] ACPI: FACS 0x00000000BF76E000 000040
[Çrş Kas 18 22:12:02 2015] ACPI: ASF! 0x00000000BF7FD000 0000A5 (v32 Sony   VAIO     20111117 INTL 20061109)
[Çrş Kas 18 22:12:02 2015] ACPI: HPET 0x00000000BF7FB000 000038 (v01 Sony   VAIO     20111117 INTL 20061109)
[Çrş Kas 18 22:12:02 2015] ACPI: APIC 0x00000000BF7FA000 00008C (v02 Sony   VAIO     20111117 INTL 20061109)
[Çrş Kas 18 22:12:02 2015] ACPI: MCFG 0x00000000BF7F9000 00003C (v01 Sony   VAIO     20111117 INTL 20061109)
[Çrş Kas 18 22:12:02 2015] ACPI: SLIC 0x00000000BF7F0000 000176 (v01 Sony   VAIO     20111117 INTL 20061109)
[Çrş Kas 18 22:12:02 2015] ACPI: WDAT 0x00000000BF7EF000 000224 (v01 Sony   VAIO     20111117 INTL 20061109)
[Çrş Kas 18 22:12:02 2015] ACPI: SSDT 0x00000000BF7ED000 001068 (v01 Sony   VAIO     20111117 INTL 20061109)
[Çrş Kas 18 22:12:02 2015] ACPI: BOOT 0x00000000BF7EB000 000028 (v01 Sony   VAIO     20111117 INTL 20061109)
[Çrş Kas 18 22:12:02 2015] ACPI: ASPT 0x00000000BF7E8000 000034 (v07 Sony   VAIO     20111117 INTL 20061109)
[Çrş Kas 18 22:12:02 2015] ACPI: SSDT 0x00000000BF7E7000 0007C2 (v01 Sony   VAIO     20111117 INTL 20061109)
[Çrş Kas 18 22:12:02 2015] ACPI: SSDT 0x00000000BF7E6000 000996 (v01 Sony   VAIO     20111117 INTL 20061109)
[Çrş Kas 18 22:12:02 2015] ACPI: Local APIC address 0xfee00000
[Çrş Kas 18 22:12:02 2015] 4220MB HIGHMEM available.
[Çrş Kas 18 22:12:02 2015] 891MB LOWMEM available.
[Çrş Kas 18 22:12:02 2015]   mapped low ram: 0 - 37bfe000
[Çrş Kas 18 22:12:02 2015]   low ram: 0 - 37bfe000
[Çrş Kas 18 22:12:02 2015] Zone ranges:
[Çrş Kas 18 22:12:02 2015]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[Çrş Kas 18 22:12:02 2015]   Normal   [mem 0x0000000001000000-0x0000000037bfdfff]
[Çrş Kas 18 22:12:02 2015]   HighMem  [mem 0x0000000037bfe000-0x000000013f7fffff]
[Çrş Kas 18 22:12:02 2015] Movable zone start for each node
[Çrş Kas 18 22:12:02 2015] Early memory node ranges
[Çrş Kas 18 22:12:02 2015]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[Çrş Kas 18 22:12:02 2015]   node   0: [mem 0x0000000000100000-0x00000000bf63efff]
[Çrş Kas 18 22:12:02 2015]   node   0: [mem 0x00000000bf7ff000-0x00000000bf7fffff]
[Çrş Kas 18 22:12:02 2015]   node   0: [mem 0x0000000100000000-0x000000013f7fffff]
[Çrş Kas 18 22:12:02 2015] Initmem setup node 0 [mem 0x0000000000001000-0x000000013f7fffff]
[Çrş Kas 18 22:12:02 2015] On node 0 totalpages: 1043932
[Çrş Kas 18 22:12:02 2015]   DMA zone: 40 pages used for memmap
[Çrş Kas 18 22:12:02 2015]   DMA zone: 0 pages reserved
[Çrş Kas 18 22:12:02 2015]   DMA zone: 3996 pages, LIFO batch:0
[Çrş Kas 18 22:12:02 2015]   Normal zone: 2190 pages used for memmap
[Çrş Kas 18 22:12:02 2015]   Normal zone: 224254 pages, LIFO batch:31
[Çrş Kas 18 22:12:02 2015]   HighMem zone: 815682 pages, LIFO batch:31
[Çrş Kas 18 22:12:02 2015] Using APIC driver default
[Çrş Kas 18 22:12:02 2015] ACPI: PM-Timer IO Port: 0x408
[Çrş Kas 18 22:12:02 2015] ACPI: Local APIC address 0xfee00000
[Çrş Kas 18 22:12:02 2015] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[Çrş Kas 18 22:12:02 2015] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[Çrş Kas 18 22:12:02 2015] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[Çrş Kas 18 22:12:02 2015] ACPI: IRQ0 used by override.
[Çrş Kas 18 22:12:02 2015] ACPI: IRQ9 used by override.
[Çrş Kas 18 22:12:02 2015] Using ACPI (MADT) for SMP configuration information
[Çrş Kas 18 22:12:02 2015] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[Çrş Kas 18 22:12:02 2015] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[Çrş Kas 18 22:12:02 2015] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[Çrş Kas 18 22:12:02 2015] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[Çrş Kas 18 22:12:02 2015] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[Çrş Kas 18 22:12:02 2015] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[Çrş Kas 18 22:12:02 2015] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[Çrş Kas 18 22:12:02 2015] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[Çrş Kas 18 22:12:02 2015] Booting paravirtualized kernel on bare hardware
[Çrş Kas 18 22:12:02 2015] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[Çrş Kas 18 22:12:02 2015] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[Çrş Kas 18 22:12:02 2015] PERCPU: Embedded 19 pages/cpu @f623f000 s47116 r0 d30708 u77824
[Çrş Kas 18 22:12:02 2015] pcpu-alloc: s47116 r0 d30708 u77824 alloc=19*4096
[Çrş Kas 18 22:12:02 2015] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[Çrş Kas 18 22:12:02 2015] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1041702
[Çrş Kas 18 22:12:02 2015] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-18-generic root=UUID=dc980b9c-97ed-451d-88b5-32f78f3808b8 ro quiet splash
[Çrş Kas 18 22:12:02 2015] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Çrş Kas 18 22:12:02 2015] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Çrş Kas 18 22:12:02 2015] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Çrş Kas 18 22:12:02 2015] microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12
[Çrş Kas 18 22:12:02 2015] Initializing CPU#0
[Çrş Kas 18 22:12:02 2015] Initializing HighMem for node 0 (00037bfe:0013f800)
[Çrş Kas 18 22:12:02 2015] Initializing Movable for node 0 (00000000:00000000)
[Çrş Kas 18 22:12:02 2015] Memory: 4088292K/4175728K available (7574K kernel code, 738K rwdata, 3020K rodata, 928K init, 796K bss, 87436K reserved, 0K cma-reserved, 3262728K highmem)
[Çrş Kas 18 22:12:02 2015] virtual kernel memory layout:
                                 fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
                                 pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                                 vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                                 lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                                   .init : 0xc1b14000 - 0xc1bfc000   ( 928 kB)
                                   .data : 0xc1765bf0 - 0xc1b12a40   (3763 kB)
                                   .text : 0xc1000000 - 0xc1765bf0   (7574 kB)
[Çrş Kas 18 22:12:02 2015] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[Çrş Kas 18 22:12:02 2015] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[Çrş Kas 18 22:12:02 2015] Hierarchical RCU implementation.
[Çrş Kas 18 22:12:02 2015] Build-time adjustment of leaf fanout to 32.
[Çrş Kas 18 22:12:02 2015] NR_IRQS:2304 nr_irqs:488 16
[Çrş Kas 18 22:12:02 2015] CPU 0 irqstacks, hard=f2c3a000 soft=f2c3c000
[Çrş Kas 18 22:12:02 2015] Console: colour VGA+ 80x25
[Çrş Kas 18 22:12:02 2015] console [tty0] enabled
[Çrş Kas 18 22:12:02 2015] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[Çrş Kas 18 22:12:02 2015] hpet clockevent registered
[Çrş Kas 18 22:12:02 2015] tsc: Fast TSC calibration using PIT
[Çrş Kas 18 22:12:02 2015] tsc: Detected 2494.141 MHz processor
[Çrş Kas 18 22:12:02 2015] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.28 BogoMIPS (lpj=9976564)
[Çrş Kas 18 22:12:02 2015] pid_max: default: 32768 minimum: 301
[Çrş Kas 18 22:12:02 2015] ACPI: Core revision 20150619
[Çrş Kas 18 22:12:02 2015] ACPI: All ACPI Tables successfully acquired
[Çrş Kas 18 22:12:02 2015] Security Framework initialized
[Çrş Kas 18 22:12:02 2015] AppArmor: AppArmor initialized
[Çrş Kas 18 22:12:02 2015] Yama: becoming mindful.
[Çrş Kas 18 22:12:02 2015] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Çrş Kas 18 22:12:02 2015] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Çrş Kas 18 22:12:02 2015] Initializing cgroup subsys blkio
[Çrş Kas 18 22:12:02 2015] Initializing cgroup subsys memory
[Çrş Kas 18 22:12:02 2015] Initializing cgroup subsys devices
[Çrş Kas 18 22:12:02 2015] Initializing cgroup subsys freezer
[Çrş Kas 18 22:12:02 2015] Initializing cgroup subsys net_cls
[Çrş Kas 18 22:12:02 2015] Initializing cgroup subsys perf_event
[Çrş Kas 18 22:12:02 2015] Initializing cgroup subsys net_prio
[Çrş Kas 18 22:12:02 2015] Initializing cgroup subsys hugetlb
[Çrş Kas 18 22:12:02 2015] CPU: Physical Processor ID: 0
[Çrş Kas 18 22:12:02 2015] CPU: Processor Core ID: 0
[Çrş Kas 18 22:12:02 2015] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[Çrş Kas 18 22:12:02 2015] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[Çrş Kas 18 22:12:02 2015] mce: CPU supports 7 MCE banks
[Çrş Kas 18 22:12:02 2015] CPU0: Thermal monitoring handled by SMI
[Çrş Kas 18 22:12:02 2015] process: using mwait in idle threads
[Çrş Kas 18 22:12:02 2015] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[Çrş Kas 18 22:12:02 2015] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[Çrş Kas 18 22:12:02 2015] Freeing SMP alternatives memory: 28K (c1bfc000 - c1c03000)
[Çrş Kas 18 22:12:02 2015] ftrace: allocating 30215 entries in 60 pages
[Çrş Kas 18 22:12:02 2015] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[Çrş Kas 18 22:12:02 2015] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[Çrş Kas 18 22:12:02 2015] TSC deadline timer enabled
[Çrş Kas 18 22:12:02 2015] smpboot: CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07)
[Çrş Kas 18 22:12:02 2015] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[Çrş Kas 18 22:12:02 2015] ... version:                3
[Çrş Kas 18 22:12:02 2015] ... bit width:              48
[Çrş Kas 18 22:12:02 2015] ... generic registers:      4
[Çrş Kas 18 22:12:02 2015] ... value mask:             0000ffffffffffff
[Çrş Kas 18 22:12:02 2015] ... max period:             0000ffffffffffff
[Çrş Kas 18 22:12:02 2015] ... fixed-purpose events:   3
[Çrş Kas 18 22:12:02 2015] ... event mask:             000000070000000f
[Çrş Kas 18 22:12:02 2015] CPU 1 irqstacks, hard=f2d94000 soft=f2d96000
[Çrş Kas 18 22:12:02 2015] x86: Booting SMP configuration:
[Çrş Kas 18 22:12:02 2015] .... node  #0, CPUs:      #1
[Çrş Kas 18 22:12:02 2015] Initializing CPU#1
[Çrş Kas 18 22:12:02 2015] CPU1: Thermal monitoring handled by SMI
[Çrş Kas 18 22:12:02 2015] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[Çrş Kas 18 22:12:02 2015] CPU 2 irqstacks, hard=f2eec000 soft=f2eee000
[Çrş Kas 18 22:12:02 2015]  #2
[Çrş Kas 18 22:12:02 2015] microcode: CPU2 microcode updated early to revision 0x29, date = 2013-06-12
[Çrş Kas 18 22:12:02 2015] Initializing CPU#2
[Çrş Kas 18 22:12:02 2015] CPU2: Thermal monitoring handled by SMI
[Çrş Kas 18 22:12:02 2015] CPU 3 irqstacks, hard=f2f50000 soft=f2f52000
[Çrş Kas 18 22:12:02 2015]  #3
[Çrş Kas 18 22:12:02 2015] Initializing CPU#3
[Çrş Kas 18 22:12:02 2015] CPU3: Thermal monitoring handled by SMI
[Çrş Kas 18 22:12:02 2015] x86: Booted up 1 node, 4 CPUs
[Çrş Kas 18 22:12:02 2015] smpboot: Total of 4 processors activated (19953.12 BogoMIPS)
[Çrş Kas 18 22:12:02 2015] devtmpfs: initialized
[Çrş Kas 18 22:12:02 2015] evm: security.selinux
[Çrş Kas 18 22:12:02 2015] evm: security.SMACK64
[Çrş Kas 18 22:12:02 2015] evm: security.SMACK64EXEC
[Çrş Kas 18 22:12:02 2015] evm: security.SMACK64TRANSMUTE
[Çrş Kas 18 22:12:02 2015] evm: security.SMACK64MMAP
[Çrş Kas 18 22:12:02 2015] evm: security.ima
[Çrş Kas 18 22:12:02 2015] evm: security.capability
[Çrş Kas 18 22:12:02 2015] PM: Registering ACPI NVS region [mem 0xbf6bf000-0xbf7befff] (1048576 bytes)
[Çrş Kas 18 22:12:02 2015] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[Çrş Kas 18 22:12:02 2015] pinctrl core: initialized pinctrl subsystem
[Çrş Kas 18 22:12:02 2015] RTC time: 15:12:02, date: 11/18/15
[Çrş Kas 18 22:12:02 2015] NET: Registered protocol family 16
[Çrş Kas 18 22:12:02 2015] EISA bus registered
[Çrş Kas 18 22:12:02 2015] cpuidle: using governor ladder
[Çrş Kas 18 22:12:02 2015] cpuidle: using governor menu
[Çrş Kas 18 22:12:02 2015] Simple Boot Flag at 0x44 set to 0x1
[Çrş Kas 18 22:12:02 2015] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[Çrş Kas 18 22:12:02 2015] ACPI: bus type PCI registered
[Çrş Kas 18 22:12:02 2015] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[Çrş Kas 18 22:12:02 2015] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[Çrş Kas 18 22:12:02 2015] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[Çrş Kas 18 22:12:02 2015] PCI: Using MMCONFIG for extended config space
[Çrş Kas 18 22:12:02 2015] PCI: Using configuration type 1 for base access
[Çrş Kas 18 22:12:02 2015] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[Çrş Kas 18 22:12:02 2015] mtrr: your CPUs had inconsistent variable MTRR settings
[Çrş Kas 18 22:12:02 2015] mtrr: probably your BIOS does not setup all CPUs.
[Çrş Kas 18 22:12:02 2015] mtrr: corrected configuration.
[Çrş Kas 18 22:12:02 2015] ACPI: Added _OSI(Module Device)
[Çrş Kas 18 22:12:02 2015] ACPI: Added _OSI(Processor Device)
[Çrş Kas 18 22:12:02 2015] ACPI: Added _OSI(3.0 _SCP Extensions)
[Çrş Kas 18 22:12:02 2015] ACPI: Added _OSI(Processor Aggregator Device)
[Çrş Kas 18 22:12:02 2015] ACPI: Executed 1 blocks of module-level executable AML code
[Çrş Kas 18 22:12:02 2015] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[Çrş Kas 18 22:12:02 2015] ACPI: Dynamic OEM Table Load:
[Çrş Kas 18 22:12:02 2015] ACPI: SSDT 0x00000000F2C12800 00067C (v01 PmRef  Cpu0Cst  00003001 INTL 20100121)
[Çrş Kas 18 22:12:02 2015] ACPI: Dynamic OEM Table Load:
[Çrş Kas 18 22:12:02 2015] ACPI: SSDT 0x00000000F2C87C00 000303 (v01 PmRef  ApIst    00003000 INTL 20100121)
[Çrş Kas 18 22:12:02 2015] ACPI: Dynamic OEM Table Load:
[Çrş Kas 18 22:12:02 2015] ACPI: SSDT 0x00000000F2FB6200 000119 (v01 PmRef  ApCst    00003000 INTL 20100121)
[Çrş Kas 18 22:12:02 2015] ACPI : EC: EC started
[Çrş Kas 18 22:12:02 2015] ACPI: Interpreter enabled
[Çrş Kas 18 22:12:02 2015] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[Çrş Kas 18 22:12:02 2015] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[Çrş Kas 18 22:12:02 2015] ACPI: (supports S0 S3 S4 S5)
[Çrş Kas 18 22:12:02 2015] ACPI: Using IOAPIC for interrupt routing
[Çrş Kas 18 22:12:02 2015] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Çrş Kas 18 22:12:02 2015] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[Çrş Kas 18 22:12:02 2015] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[Çrş Kas 18 22:12:02 2015] \_SB_.PCI0:_OSC invalid UUID
[Çrş Kas 18 22:12:02 2015] _OSC request data:1 1f 0
[Çrş Kas 18 22:12:02 2015] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[Çrş Kas 18 22:12:02 2015] PCI host bridge to bus 0000:00
[Çrş Kas 18 22:12:02 2015] pci_bus 0000:00: root bus resource [bus 00-fe]
[Çrş Kas 18 22:12:02 2015] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[Çrş Kas 18 22:12:02 2015] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[Çrş Kas 18 22:12:02 2015] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[Çrş Kas 18 22:12:02 2015] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[Çrş Kas 18 22:12:02 2015] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[Çrş Kas 18 22:12:02 2015] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[Çrş Kas 18 22:12:02 2015] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[Çrş Kas 18 22:12:02 2015] pci 0000:00:16.0: reg 0x10: [mem 0xd5304000-0xd530400f 64bit]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1a.0: reg 0x10: [mem 0xd5309000-0xd53093ff]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1a.0: System wakeup disabled by ACPI
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1b.0: reg 0x10: [mem 0xd5300000-0xd5303fff 64bit]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.0: System wakeup disabled by ACPI
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.3: System wakeup disabled by ACPI
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.5: System wakeup disabled by ACPI
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1d.0: reg 0x10: [mem 0xd5308000-0xd53083ff]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1d.0: System wakeup disabled by ACPI
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1f.2: reg 0x10: [io  0x5048-0x504f]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1f.2: reg 0x14: [io  0x5054-0x5057]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1f.2: reg 0x18: [io  0x5040-0x5047]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1f.2: reg 0x1c: [io  0x5050-0x5053]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1f.2: reg 0x20: [io  0x5020-0x503f]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1f.2: reg 0x24: [mem 0xd5307000-0xd53077ff]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1f.2: PME# supported from D3hot
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1f.3: reg 0x10: [mem 0xd5305000-0xd53050ff 64bit]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1f.3: reg 0x20: [io  0x5000-0x501f]
[Çrş Kas 18 22:12:02 2015] pci 0000:01:00.0: [10de:1055] type 00 class 0x030000
[Çrş Kas 18 22:12:02 2015] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[Çrş Kas 18 22:12:02 2015] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[Çrş Kas 18 22:12:02 2015] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[Çrş Kas 18 22:12:02 2015] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
[Çrş Kas 18 22:12:02 2015] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[Çrş Kas 18 22:12:02 2015] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
[Çrş Kas 18 22:12:02 2015] pci 0000:01:00.1: reg 0x10: [mem 0xd3000000-0xd3003fff]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd30fffff]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[Çrş Kas 18 22:12:02 2015] pci 0000:07:00.0: [168c:002b] type 00 class 0x028000
[Çrş Kas 18 22:12:02 2015] pci 0000:07:00.0: reg 0x10: [mem 0xd5200000-0xd520ffff 64bit]
[Çrş Kas 18 22:12:02 2015] pci 0000:07:00.0: supports D1
[Çrş Kas 18 22:12:02 2015] pci 0000:07:00.0: PME# supported from D0 D1 D3hot D3cold
[Çrş Kas 18 22:12:02 2015] pci 0000:07:00.0: System wakeup disabled by ACPI
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.0: PCI bridge to [bus 07]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.0:   bridge window [mem 0xd5200000-0xd52fffff]
[Çrş Kas 18 22:12:02 2015] pci 0000:0d:00.0: [10ec:5209] type 00 class 0xff0000
[Çrş Kas 18 22:12:02 2015] pci 0000:0d:00.0: reg 0x10: [mem 0xd4200000-0xd4200fff]
[Çrş Kas 18 22:12:02 2015] pci 0000:0d:00.0: supports D1 D2
[Çrş Kas 18 22:12:02 2015] pci 0000:0d:00.0: PME# supported from D1 D2 D3hot
[Çrş Kas 18 22:12:02 2015] pci 0000:0d:00.0: System wakeup disabled by ACPI
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.3: PCI bridge to [bus 0d-12]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.3:   bridge window [mem 0xd4200000-0xd51fffff]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.3:   bridge window [mem 0xd3100000-0xd40fffff 64bit pref]
[Çrş Kas 18 22:12:02 2015] pci 0000:13:00.0: [10ec:8168] type 00 class 0x020000
[Çrş Kas 18 22:12:02 2015] pci 0000:13:00.0: reg 0x10: [io  0x2000-0x20ff]
[Çrş Kas 18 22:12:02 2015] pci 0000:13:00.0: reg 0x18: [mem 0xd4104000-0xd4104fff 64bit pref]
[Çrş Kas 18 22:12:02 2015] pci 0000:13:00.0: reg 0x20: [mem 0xd4100000-0xd4103fff 64bit pref]
[Çrş Kas 18 22:12:02 2015] pci 0000:13:00.0: supports D1 D2
[Çrş Kas 18 22:12:02 2015] pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[Çrş Kas 18 22:12:02 2015] pci 0000:13:00.0: System wakeup disabled by ACPI
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.5: PCI bridge to [bus 13]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.5:   bridge window [mem 0xd4100000-0xd41fffff 64bit pref]
[Çrş Kas 18 22:12:02 2015] pci_bus 0000:00: on NUMA node 0
[Çrş Kas 18 22:12:02 2015] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[Çrş Kas 18 22:12:02 2015] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[Çrş Kas 18 22:12:02 2015] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[Çrş Kas 18 22:12:02 2015] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[Çrş Kas 18 22:12:02 2015] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[Çrş Kas 18 22:12:02 2015] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[Çrş Kas 18 22:12:02 2015] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[Çrş Kas 18 22:12:02 2015] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[Çrş Kas 18 22:12:02 2015] ACPI: Enabled 4 GPEs in block 00 to 3F
[Çrş Kas 18 22:12:02 2015] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[Çrş Kas 18 22:12:02 2015] vgaarb: setting as boot device: PCI:0000:01:00.0
[Çrş Kas 18 22:12:02 2015] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[Çrş Kas 18 22:12:02 2015] vgaarb: loaded
[Çrş Kas 18 22:12:02 2015] vgaarb: bridge control possible 0000:01:00.0
[Çrş Kas 18 22:12:02 2015] SCSI subsystem initialized
[Çrş Kas 18 22:12:02 2015] libata version 3.00 loaded.
[Çrş Kas 18 22:12:02 2015] ACPI: bus type USB registered
[Çrş Kas 18 22:12:02 2015] usbcore: registered new interface driver usbfs
[Çrş Kas 18 22:12:02 2015] usbcore: registered new interface driver hub
[Çrş Kas 18 22:12:02 2015] usbcore: registered new device driver usb
[Çrş Kas 18 22:12:02 2015] PCI: Using ACPI for IRQ routing
[Çrş Kas 18 22:12:02 2015] PCI: pci_cache_line_size set to 64 bytes
[Çrş Kas 18 22:12:02 2015] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[Çrş Kas 18 22:12:02 2015] e820: reserve RAM buffer [mem 0xbf63f000-0xbfffffff]
[Çrş Kas 18 22:12:02 2015] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[Çrş Kas 18 22:12:02 2015] e820: reserve RAM buffer [mem 0x13f800000-0x13fffffff]
[Çrş Kas 18 22:12:02 2015] NetLabel: Initializing
[Çrş Kas 18 22:12:02 2015] NetLabel:  domain hash size = 128
[Çrş Kas 18 22:12:02 2015] NetLabel:  protocols = UNLABELED CIPSOv4
[Çrş Kas 18 22:12:02 2015] NetLabel:  unlabeled traffic allowed by default
[Çrş Kas 18 22:12:02 2015] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[Çrş Kas 18 22:12:02 2015] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[Çrş Kas 18 22:12:02 2015] clocksource: Switched to clocksource hpet
[Çrş Kas 18 22:12:02 2015] AppArmor: AppArmor Filesystem Enabled
[Çrş Kas 18 22:12:02 2015] pnp: PnP ACPI init
[Çrş Kas 18 22:12:02 2015] system 00:00: [io  0x0680-0x069f] has been reserved
[Çrş Kas 18 22:12:02 2015] system 00:00: [io  0x1000-0x100f] has been reserved
[Çrş Kas 18 22:12:02 2015] system 00:00: [io  0x1010-0x1013] has been reserved
[Çrş Kas 18 22:12:02 2015] system 00:00: [io  0xffff] has been reserved
[Çrş Kas 18 22:12:02 2015] system 00:00: [io  0x0400-0x0453] could not be reserved
[Çrş Kas 18 22:12:02 2015] system 00:00: [io  0x0458-0x047f] has been reserved
[Çrş Kas 18 22:12:02 2015] system 00:00: [io  0x0500-0x057f] has been reserved
[Çrş Kas 18 22:12:02 2015] system 00:00: [io  0x164e-0x164f] has been reserved
[Çrş Kas 18 22:12:02 2015] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[Çrş Kas 18 22:12:02 2015] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[Çrş Kas 18 22:12:02 2015] system 00:02: [io  0x0454-0x0457] has been reserved
[Çrş Kas 18 22:12:02 2015] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[Çrş Kas 18 22:12:02 2015] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[Çrş Kas 18 22:12:02 2015] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[Çrş Kas 18 22:12:02 2015] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[Çrş Kas 18 22:12:02 2015] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[Çrş Kas 18 22:12:02 2015] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[Çrş Kas 18 22:12:02 2015] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[Çrş Kas 18 22:12:02 2015] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[Çrş Kas 18 22:12:02 2015] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[Çrş Kas 18 22:12:02 2015] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[Çrş Kas 18 22:12:02 2015] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[Çrş Kas 18 22:12:02 2015] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[Çrş Kas 18 22:12:02 2015] system 00:05: [mem 0xd5400000-0xd5400fff] has been reserved
[Çrş Kas 18 22:12:02 2015] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[Çrş Kas 18 22:12:02 2015] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
[Çrş Kas 18 22:12:02 2015] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved
[Çrş Kas 18 22:12:02 2015] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[Çrş Kas 18 22:12:02 2015] pnp: PnP ACPI: found 7 devices
[Çrş Kas 18 22:12:02 2015] PnPBIOS: Disabled by ACPI PNP
[Çrş Kas 18 22:12:02 2015] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[Çrş Kas 18 22:12:02 2015] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[Çrş Kas 18 22:12:02 2015] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd30fffff]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.0: PCI bridge to [bus 07]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.0:   bridge window [mem 0xd5200000-0xd52fffff]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.3: PCI bridge to [bus 0d-12]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.3:   bridge window [mem 0xd4200000-0xd51fffff]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.3:   bridge window [mem 0xd3100000-0xd40fffff 64bit pref]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.5: PCI bridge to [bus 13]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[Çrş Kas 18 22:12:02 2015] pci 0000:00:1c.5:   bridge window [mem 0xd4100000-0xd41fffff 64bit pref]
[Çrş Kas 18 22:12:02 2015] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[Çrş Kas 18 22:12:02 2015] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[Çrş Kas 18 22:12:02 2015] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[Çrş Kas 18 22:12:02 2015] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff window]
[Çrş Kas 18 22:12:02 2015] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[Çrş Kas 18 22:12:02 2015] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
[Çrş Kas 18 22:12:02 2015] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[Çrş Kas 18 22:12:02 2015] pci_bus 0000:07: resource 1 [mem 0xd5200000-0xd52fffff]
[Çrş Kas 18 22:12:02 2015] pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
[Çrş Kas 18 22:12:02 2015] pci_bus 0000:0d: resource 1 [mem 0xd4200000-0xd51fffff]
[Çrş Kas 18 22:12:02 2015] pci_bus 0000:0d: resource 2 [mem 0xd3100000-0xd40fffff 64bit pref]
[Çrş Kas 18 22:12:02 2015] pci_bus 0000:13: resource 0 [io  0x2000-0x2fff]
[Çrş Kas 18 22:12:02 2015] pci_bus 0000:13: resource 2 [mem 0xd4100000-0xd41fffff 64bit pref]
[Çrş Kas 18 22:12:02 2015] NET: Registered protocol family 2
[Çrş Kas 18 22:12:02 2015] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Çrş Kas 18 22:12:02 2015] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Çrş Kas 18 22:12:02 2015] TCP: Hash tables configured (established 8192 bind 8192)
[Çrş Kas 18 22:12:02 2015] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Çrş Kas 18 22:12:02 2015] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Çrş Kas 18 22:12:02 2015] NET: Registered protocol family 1
[Çrş Kas 18 22:12:02 2015] pci 0000:01:00.0: Video device with shadowed ROM
[Çrş Kas 18 22:12:02 2015] PCI: CLS 64 bytes, default 64
[Çrş Kas 18 22:12:02 2015] Trying to unpack rootfs image as initramfs...
[Çrş Kas 18 22:12:02 2015] Freeing initrd memory: 31664K (f4218000 - f6104000)
[Çrş Kas 18 22:12:02 2015] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[Çrş Kas 18 22:12:02 2015] hw unit of domain pp0-core 2^-16 Joules
[Çrş Kas 18 22:12:02 2015] hw unit of domain package 2^-16 Joules
[Çrş Kas 18 22:12:02 2015] hw unit of domain pp1-gpu 2^-16 Joules
[Çrş Kas 18 22:12:02 2015] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[Çrş Kas 18 22:12:02 2015] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[Çrş Kas 18 22:12:02 2015] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[Çrş Kas 18 22:12:02 2015] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[Çrş Kas 18 22:12:02 2015] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[Çrş Kas 18 22:12:02 2015] Scanning for low memory corruption every 60 seconds
[Çrş Kas 18 22:12:02 2015] futex hash table entries: 2048 (order: 5, 131072 bytes)
[Çrş Kas 18 22:12:02 2015] Initialise system trusted keyring
[Çrş Kas 18 22:12:02 2015] audit: initializing netlink subsys (disabled)
[Çrş Kas 18 22:12:02 2015] audit: type=2000 audit(1447859522.804:1): initialized
[Çrş Kas 18 22:12:02 2015] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[Çrş Kas 18 22:12:02 2015] zpool: loaded
[Çrş Kas 18 22:12:02 2015] zbud: loaded
[Çrş Kas 18 22:12:02 2015] VFS: Disk quotas dquot_6.6.0
[Çrş Kas 18 22:12:02 2015] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Çrş Kas 18 22:12:02 2015] fuse init (API version 7.23)
[Çrş Kas 18 22:12:02 2015] Key type big_key registered
[Çrş Kas 18 22:12:02 2015] Key type asymmetric registered
[Çrş Kas 18 22:12:02 2015] Asymmetric key parser 'x509' registered
[Çrş Kas 18 22:12:02 2015] bounce: pool size: 64 pages
[Çrş Kas 18 22:12:02 2015] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[Çrş Kas 18 22:12:02 2015] io scheduler noop registered
[Çrş Kas 18 22:12:02 2015] io scheduler deadline registered (default)
[Çrş Kas 18 22:12:02 2015] io scheduler cfq registered
[Çrş Kas 18 22:12:02 2015] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[Çrş Kas 18 22:12:02 2015] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[Çrş Kas 18 22:12:02 2015] intel_idle: MWAIT substates: 0x21120
[Çrş Kas 18 22:12:02 2015] intel_idle: v0.4 model 0x2A
[Çrş Kas 18 22:12:02 2015] intel_idle: lapic_timer_reliable_states 0xffffffff
[Çrş Kas 18 22:12:02 2015] ACPI: AC Adapter [AC] (on-line)
[Çrş Kas 18 22:12:02 2015] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[Çrş Kas 18 22:12:02 2015] ACPI: Power Button [PWRB]
[Çrş Kas 18 22:12:02 2015] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[Çrş Kas 18 22:12:02 2015] ACPI: Lid Switch [LID0]
[Çrş Kas 18 22:12:02 2015] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[Çrş Kas 18 22:12:02 2015] ACPI: Power Button [PWRF]
[Çrş Kas 18 22:12:02 2015] thermal LNXTHERM:00: registered as thermal_zone0
[Çrş Kas 18 22:12:02 2015] ACPI: Thermal Zone [THRM] (47 C)
[Çrş Kas 18 22:12:02 2015] GHES: HEST is not enabled!
[Çrş Kas 18 22:12:02 2015] isapnp: Scanning for PnP cards...
[Çrş Kas 18 22:12:02 2015] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[Çrş Kas 18 22:12:02 2015] Linux agpgart interface v0.103
[Çrş Kas 18 22:12:02 2015] brd: module loaded
[Çrş Kas 18 22:12:02 2015] loop: module loaded
[Çrş Kas 18 22:12:02 2015] libphy: Fixed MDIO Bus: probed
[Çrş Kas 18 22:12:02 2015] tun: Universal TUN/TAP device driver, 1.6
[Çrş Kas 18 22:12:02 2015] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[Çrş Kas 18 22:12:02 2015] PPP generic driver version 2.4.2
[Çrş Kas 18 22:12:02 2015] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[Çrş Kas 18 22:12:02 2015] ehci-pci: EHCI PCI platform driver
[Çrş Kas 18 22:12:02 2015] ehci-pci 0000:00:1a.0: EHCI Host Controller
[Çrş Kas 18 22:12:02 2015] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[Çrş Kas 18 22:12:02 2015] ehci-pci 0000:00:1a.0: debug port 2
[Çrş Kas 18 22:12:02 2015] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[Çrş Kas 18 22:12:02 2015] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd5309000
[Çrş Kas 18 22:12:02 2015] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[Çrş Kas 18 22:12:02 2015] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Çrş Kas 18 22:12:02 2015] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Çrş Kas 18 22:12:02 2015] usb usb1: Product: EHCI Host Controller
[Çrş Kas 18 22:12:02 2015] usb usb1: Manufacturer: Linux 4.2.0-18-generic ehci_hcd
[Çrş Kas 18 22:12:02 2015] usb usb1: SerialNumber: 0000:00:1a.0
[Çrş Kas 18 22:12:02 2015] hub 1-0:1.0: USB hub found
[Çrş Kas 18 22:12:02 2015] hub 1-0:1.0: 2 ports detected
[Çrş Kas 18 22:12:02 2015] ehci-pci 0000:00:1d.0: EHCI Host Controller
[Çrş Kas 18 22:12:02 2015] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[Çrş Kas 18 22:12:02 2015] ehci-pci 0000:00:1d.0: debug port 2
[Çrş Kas 18 22:12:02 2015] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[Çrş Kas 18 22:12:02 2015] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd5308000
[Çrş Kas 18 22:12:02 2015] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[Çrş Kas 18 22:12:02 2015] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[Çrş Kas 18 22:12:02 2015] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Çrş Kas 18 22:12:02 2015] usb usb2: Product: EHCI Host Controller
[Çrş Kas 18 22:12:02 2015] usb usb2: Manufacturer: Linux 4.2.0-18-generic ehci_hcd
[Çrş Kas 18 22:12:02 2015] usb usb2: SerialNumber: 0000:00:1d.0
[Çrş Kas 18 22:12:02 2015] hub 2-0:1.0: USB hub found
[Çrş Kas 18 22:12:02 2015] hub 2-0:1.0: 2 ports detected
[Çrş Kas 18 22:12:02 2015] ehci-platform: EHCI generic platform driver
[Çrş Kas 18 22:12:02 2015] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[Çrş Kas 18 22:12:02 2015] ohci-pci: OHCI PCI platform driver
[Çrş Kas 18 22:12:02 2015] ohci-platform: OHCI generic platform driver
[Çrş Kas 18 22:12:02 2015] uhci_hcd: USB Universal Host Controller Interface driver
[Çrş Kas 18 22:12:02 2015] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[Çrş Kas 18 22:12:02 2015] serio: i8042 KBD port at 0x60,0x64 irq 1
[Çrş Kas 18 22:12:02 2015] serio: i8042 AUX port at 0x60,0x64 irq 12
[Çrş Kas 18 22:12:02 2015] mousedev: PS/2 mouse device common for all mice
[Çrş Kas 18 22:12:02 2015] rtc_cmos 00:01: RTC can wake from S4
[Çrş Kas 18 22:12:02 2015] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[Çrş Kas 18 22:12:02 2015] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[Çrş Kas 18 22:12:02 2015] i2c /dev entries driver
[Çrş Kas 18 22:12:02 2015] device-mapper: uevent: version 1.0.3
[Çrş Kas 18 22:12:02 2015] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[Çrş Kas 18 22:12:02 2015] platform eisa.0: Probing EISA bus 0
[Çrş Kas 18 22:12:02 2015] platform eisa.0: EISA: Cannot allocate resource for mainboard
[Çrş Kas 18 22:12:02 2015] platform eisa.0: Cannot allocate resource for EISA slot 1
[Çrş Kas 18 22:12:02 2015] platform eisa.0: Cannot allocate resource for EISA slot 2
[Çrş Kas 18 22:12:02 2015] platform eisa.0: Cannot allocate resource for EISA slot 3
[Çrş Kas 18 22:12:02 2015] platform eisa.0: Cannot allocate resource for EISA slot 4
[Çrş Kas 18 22:12:02 2015] platform eisa.0: Cannot allocate resource for EISA slot 5
[Çrş Kas 18 22:12:02 2015] platform eisa.0: Cannot allocate resource for EISA slot 6
[Çrş Kas 18 22:12:02 2015] platform eisa.0: Cannot allocate resource for EISA slot 7
[Çrş Kas 18 22:12:02 2015] platform eisa.0: Cannot allocate resource for EISA slot 8
[Çrş Kas 18 22:12:02 2015] platform eisa.0: EISA: Detected 0 cards
[Çrş Kas 18 22:12:02 2015] cpufreq-nforce2: No nForce2 chipset.
[Çrş Kas 18 22:12:02 2015] Intel P-state driver initializing.
[Çrş Kas 18 22:12:02 2015] ledtrig-cpu: registered to indicate activity on CPUs
[Çrş Kas 18 22:12:02 2015] PCCT header not found.
[Çrş Kas 18 22:12:02 2015] NET: Registered protocol family 10
[Çrş Kas 18 22:12:02 2015] NET: Registered protocol family 17
[Çrş Kas 18 22:12:02 2015] Key type dns_resolver registered
[Çrş Kas 18 22:12:02 2015] Using IPI No-Shortcut mode
[Çrş Kas 18 22:12:02 2015] Loading compiled-in X.509 certificates
[Çrş Kas 18 22:12:02 2015] Loaded X.509 cert 'Build time autogenerated kernel key: 4a9369b374fcb561ad6835bdaadb20771ff50bbd'
[Çrş Kas 18 22:12:02 2015] registered taskstats version 1
[Çrş Kas 18 22:12:02 2015] zswap: loading zswap
[Çrş Kas 18 22:12:02 2015] zswap: using zbud pool
[Çrş Kas 18 22:12:02 2015] zswap: using lzo compressor
[Çrş Kas 18 22:12:02 2015] Key type trusted registered
[Çrş Kas 18 22:12:02 2015] Key type encrypted registered
[Çrş Kas 18 22:12:02 2015] AppArmor: AppArmor sha1 policy hashing enabled
[Çrş Kas 18 22:12:02 2015] ima: No TPM chip found, activating TPM-bypass!
[Çrş Kas 18 22:12:02 2015] evm: HMAC attrs: 0x1
[Çrş Kas 18 22:12:02 2015]   Magic number: 7:143:235
[Çrş Kas 18 22:12:02 2015] rtc_cmos 00:01: setting system clock to 2015-11-18 15:12:03 UTC (1447859523)
[Çrş Kas 18 22:12:02 2015] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[Çrş Kas 18 22:12:02 2015] EDD information not available.
[Çrş Kas 18 22:12:02 2015] PM: Hibernation image not present or could not be loaded.
[Çrş Kas 18 22:12:02 2015] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[Çrş Kas 18 22:12:02 2015] ACPI: Battery Slot [BAT0] (battery present)
[Çrş Kas 18 22:12:03 2015] usb 1-1: new high-speed USB device number 2 using ehci-pci
[Çrş Kas 18 22:12:03 2015] usb 2-1: new high-speed USB device number 2 using ehci-pci
[Çrş Kas 18 22:12:03 2015] isapnp: No Plug & Play device found
[Çrş Kas 18 22:12:03 2015] Freeing unused kernel memory: 928K (c1b14000 - c1bfc000)
[Çrş Kas 18 22:12:03 2015] Write protecting the kernel text: 7576k
[Çrş Kas 18 22:12:03 2015] Write protecting the kernel read-only data: 3024k
[Çrş Kas 18 22:12:03 2015] NX-protecting the kernel data: 4712k
[Çrş Kas 18 22:12:03 2015] random: systemd-udevd urandom read with 10 bits of entropy available
[Çrş Kas 18 22:12:03 2015] ACPI: Video Device [DGPU] (multi-head: yes  rom: no  post: no)
[Çrş Kas 18 22:12:03 2015] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[Çrş Kas 18 22:12:03 2015] r8169 0000:13:00.0: can't disable ASPM; OS doesn't have ASPM control
[Çrş Kas 18 22:12:03 2015] ahci 0000:00:1f.2: version 3.0
[Çrş Kas 18 22:12:03 2015] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[Çrş Kas 18 22:12:03 2015] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Çrş Kas 18 22:12:03 2015] hub 1-1:1.0: USB hub found
[Çrş Kas 18 22:12:03 2015] hub 1-1:1.0: 6 ports detected
[Çrş Kas 18 22:12:03 2015] rtsx_pci 0000:0d:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 25
[Çrş Kas 18 22:12:03 2015] r8169 0000:13:00.0 eth0: RTL8168e/8111e at 0xf8446000, 78:84:3c:ff:70:a1, XID 0c200000 IRQ 27
[Çrş Kas 18 22:12:03 2015] r8169 0000:13:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[Çrş Kas 18 22:12:03 2015] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x9 impl SATA mode
[Çrş Kas 18 22:12:03 2015] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[Çrş Kas 18 22:12:03 2015] scsi host0: ahci
[Çrş Kas 18 22:12:03 2015] scsi host1: ahci
[Çrş Kas 18 22:12:03 2015] scsi host2: ahci
[Çrş Kas 18 22:12:03 2015] scsi host3: ahci
[Çrş Kas 18 22:12:03 2015] scsi host4: ahci
[Çrş Kas 18 22:12:03 2015] scsi host5: ahci
[Çrş Kas 18 22:12:03 2015] ata1: SATA max UDMA/133 abar m2048@0xd5307000 port 0xd5307100 irq 26
[Çrş Kas 18 22:12:03 2015] ata2: DUMMY
[Çrş Kas 18 22:12:03 2015] ata3: DUMMY
[Çrş Kas 18 22:12:03 2015] ata4: SATA max UDMA/133 abar m2048@0xd5307000 port 0xd5307280 irq 26
[Çrş Kas 18 22:12:03 2015] ata5: DUMMY
[Çrş Kas 18 22:12:03 2015] ata6: DUMMY
[Çrş Kas 18 22:12:03 2015] acpi device:22: registered as cooling_device4
[Çrş Kas 18 22:12:03 2015] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input6
[Çrş Kas 18 22:12:03 2015] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[Çrş Kas 18 22:12:03 2015] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Çrş Kas 18 22:12:03 2015] hub 2-1:1.0: USB hub found
[Çrş Kas 18 22:12:03 2015] hub 2-1:1.0: 6 ports detected
[Çrş Kas 18 22:12:03 2015] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Çrş Kas 18 22:12:03 2015] ata4.00: ATAPI: MATSHITADVD-RAM UJ8B0, 1.00, max UDMA/100
[Çrş Kas 18 22:12:03 2015] ata4.00: configured for UDMA/100
[Çrş Kas 18 22:12:03 2015] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[Çrş Kas 18 22:12:03 2015] ata1.00: ATA-8: ST9320423AS, 0006HPM1, max UDMA/100
[Çrş Kas 18 22:12:03 2015] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[Çrş Kas 18 22:12:03 2015] ata1.00: configured for UDMA/100
[Çrş Kas 18 22:12:03 2015] scsi 0:0:0:0: Direct-Access     ATA      ST9320423AS      HPM1 PQ: 0 ANSI: 5
[Çrş Kas 18 22:12:03 2015] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[Çrş Kas 18 22:12:03 2015] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Çrş Kas 18 22:12:03 2015] sd 0:0:0:0: [sda] Write Protect is off
[Çrş Kas 18 22:12:03 2015] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Çrş Kas 18 22:12:03 2015] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Çrş Kas 18 22:12:03 2015] scsi 3:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8B0    1.00 PQ: 0 ANSI: 5
[Çrş Kas 18 22:12:03 2015] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[Çrş Kas 18 22:12:03 2015] cdrom: Uniform CD-ROM driver Revision: 3.20
[Çrş Kas 18 22:12:03 2015] sr 3:0:0:0: Attached scsi CD-ROM sr0
[Çrş Kas 18 22:12:03 2015] sr 3:0:0:0: Attached scsi generic sg1 type 5
[Çrş Kas 18 22:12:03 2015] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[Çrş Kas 18 22:12:03 2015] usb 2-1.2: new low-speed USB device number 3 using ehci-pci
[Çrş Kas 18 22:12:03 2015]  sda: sda1 sda2
[Çrş Kas 18 22:12:03 2015] sd 0:0:0:0: [sda] Attached SCSI disk
[Çrş Kas 18 22:12:03 2015] tsc: Refined TSC clocksource calibration: 2494.334 MHz
[Çrş Kas 18 22:12:03 2015] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45126d86, max_idle_ns: 440795256522 ns
[Çrş Kas 18 22:12:03 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Çrş Kas 18 22:12:03 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Çrş Kas 18 22:12:03 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Çrş Kas 18 22:12:03 2015] hidraw: raw HID events driver (C) Jiri Kosina
[Çrş Kas 18 22:12:03 2015] usbcore: registered new interface driver usbhid
[Çrş Kas 18 22:12:03 2015] usbhid: USB HID core driver
[Çrş Kas 18 22:12:03 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0001/input/input7
[Çrş Kas 18 22:12:03 2015] hid-generic 0003:0000:0538.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Çrş Kas 18 22:12:03 2015] usb 1-1.2: New USB device found, idVendor=04f2, idProduct=b28a
[Çrş Kas 18 22:12:03 2015] usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[Çrş Kas 18 22:12:03 2015] usb 1-1.2: Product: Sony Visual Communication Camera
[Çrş Kas 18 22:12:03 2015] usb 1-1.2: Manufacturer: Chicony Electronics Co., Ltd.
[Çrş Kas 18 22:12:03 2015] usb 1-1.2: SerialNumber: Sony Visual Communication Camera
[Çrş Kas 18 22:12:03 2015] usb 1-1.5: new full-speed USB device number 4 using ehci-pci
[Çrş Kas 18 22:12:04 2015] usb 1-1.5: New USB device found, idVendor=0489, idProduct=e027
[Çrş Kas 18 22:12:04 2015] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Çrş Kas 18 22:12:04 2015] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input8
[Çrş Kas 18 22:12:04 2015] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input5
[Çrş Kas 18 22:12:04 2015] clocksource: Switched to clocksource tsc
[Çrş Kas 18 22:12:09 2015] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[Çrş Kas 18 22:12:10 2015] random: nonblocking pool is initialized
[Çrş Kas 18 22:12:10 2015] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[Çrş Kas 18 22:12:11 2015] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[Çrş Kas 18 22:12:11 2015] systemd[1]: Detected architecture x86.
[Çrş Kas 18 22:12:11 2015] systemd[1]: Set hostname to <tthacktt>.
[Çrş Kas 18 22:12:12 2015] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[Çrş Kas 18 22:12:12 2015] systemd[1]: Created slice Root Slice.
[Çrş Kas 18 22:12:12 2015] systemd[1]: Created slice User and Session Slice.
[Çrş Kas 18 22:12:12 2015] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[Çrş Kas 18 22:12:12 2015] systemd[1]: Listening on Journal Audit Socket.
[Çrş Kas 18 22:12:12 2015] systemd[1]: Listening on udev Control Socket.
[Çrş Kas 18 22:12:12 2015] systemd[1]: Reached target Remote File Systems (Pre).
[Çrş Kas 18 22:12:12 2015] systemd[1]: Reached target User and Group Name Lookups.
[Çrş Kas 18 22:12:12 2015] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[Çrş Kas 18 22:12:12 2015] systemd[1]: Reached target Encrypted Volumes.
[Çrş Kas 18 22:12:12 2015] systemd[1]: Listening on fsck to fsckd communication Socket.
[Çrş Kas 18 22:12:12 2015] systemd[1]: Listening on Journal Socket.
[Çrş Kas 18 22:12:12 2015] systemd[1]: Listening on udev Kernel Socket.
[Çrş Kas 18 22:12:12 2015] systemd[1]: Created slice System Slice.
[Çrş Kas 18 22:12:12 2015] systemd[1]: Reached target Slices.
[Çrş Kas 18 22:12:12 2015] systemd[1]: Mounting POSIX Message Queue File System...
[Çrş Kas 18 22:12:12 2015] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[Çrş Kas 18 22:12:12 2015] systemd[1]: Starting Setup Virtual Console...
[Çrş Kas 18 22:12:12 2015] systemd[1]: Started Braille Device Support.
[Çrş Kas 18 22:12:12 2015] systemd[1]: Starting Increase datagram queue length...
[Çrş Kas 18 22:12:12 2015] systemd[1]: Mounting Huge Pages File System...
[Çrş Kas 18 22:12:12 2015] systemd[1]: Starting udev Coldplug all Devices...
[Çrş Kas 18 22:12:12 2015] systemd[1]: Created slice system-getty.slice.
[Çrş Kas 18 22:12:12 2015] systemd[1]: Starting Uncomplicated firewall...
[Çrş Kas 18 22:12:13 2015] systemd[1]: Mounting Debug File System...
[Çrş Kas 18 22:12:13 2015] systemd[1]: Starting Load Kernel Modules...
[Çrş Kas 18 22:12:13 2015] systemd[1]: Started Read required files in advance.
[Çrş Kas 18 22:12:13 2015] systemd[1]: Listening on Journal Socket (/dev/log).
[Çrş Kas 18 22:12:13 2015] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[Çrş Kas 18 22:12:13 2015] systemd[1]: Started Create list of required static device nodes for the current kernel.
[Çrş Kas 18 22:12:13 2015] systemd[1]: Started Setup Virtual Console.
[Çrş Kas 18 22:12:13 2015] systemd[1]: Started Uncomplicated firewall.
[Çrş Kas 18 22:12:13 2015] systemd[1]: Starting Create Static Device Nodes in /dev...
[Çrş Kas 18 22:12:13 2015] systemd[1]: Started udev Coldplug all Devices.
[Çrş Kas 18 22:12:13 2015] systemd[1]: Mounted Debug File System.
[Çrş Kas 18 22:12:13 2015] systemd[1]: Mounted Huge Pages File System.
[Çrş Kas 18 22:12:13 2015] systemd[1]: Mounted POSIX Message Queue File System.
[Çrş Kas 18 22:12:13 2015] systemd[1]: Started Increase datagram queue length.
[Çrş Kas 18 22:12:13 2015] systemd[1]: Listening on Syslog Socket.
[Çrş Kas 18 22:12:13 2015] systemd[1]: Starting Journal Service...
[Çrş Kas 18 22:12:13 2015] systemd[1]: Started Journal Service.
[Çrş Kas 18 22:12:13 2015] lp: driver loaded but no devices found
[Çrş Kas 18 22:12:13 2015] ppdev: user-space parallel port driver
[Çrş Kas 18 22:12:15 2015] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[Çrş Kas 18 22:12:16 2015] systemd-journald[243]: Received request to flush runtime journal from PID 1
[Çrş Kas 18 22:12:16 2015] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[Çrş Kas 18 22:12:16 2015] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150619/utaddress-254)
[Çrş Kas 18 22:12:16 2015] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[Çrş Kas 18 22:12:16 2015] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[Çrş Kas 18 22:12:16 2015] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[Çrş Kas 18 22:12:16 2015] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[Çrş Kas 18 22:12:16 2015] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[Çrş Kas 18 22:12:16 2015] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[Çrş Kas 18 22:12:16 2015] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[Çrş Kas 18 22:12:16 2015] lpc_ich: Resource conflict(s) found affecting gpio_ich
[Çrş Kas 18 22:12:16 2015] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input9
[Çrş Kas 18 22:12:16 2015] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input10
[Çrş Kas 18 22:12:16 2015] [drm] Initialized drm 1.1.0 20060810
[Çrş Kas 18 22:12:16 2015] sony_laptop: SNC setup done.
[Çrş Kas 18 22:12:17 2015] snd_hda_intel 0000:01:00.1: Disabling MSI
[Çrş Kas 18 22:12:17 2015] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[Çrş Kas 18 22:12:17 2015] ath: phy0: ASPM enabled: 0x43
[Çrş Kas 18 22:12:17 2015] ath: EEPROM regdomain: 0x65
[Çrş Kas 18 22:12:17 2015] ath: EEPROM indicates we should expect a direct regpair map
[Çrş Kas 18 22:12:17 2015] ath: Country alpha2 being used: 00
[Çrş Kas 18 22:12:17 2015] ath: Regpair used: 0x65
[Çrş Kas 18 22:12:17 2015] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[Çrş Kas 18 22:12:17 2015] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf9040000, irq=16
[Çrş Kas 18 22:12:17 2015] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[Çrş Kas 18 22:12:17 2015] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[Çrş Kas 18 22:12:17 2015] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[Çrş Kas 18 22:12:17 2015] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[Çrş Kas 18 22:12:17 2015] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[Çrş Kas 18 22:12:17 2015] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[Çrş Kas 18 22:12:17 2015] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[Çrş Kas 18 22:12:17 2015] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1b
[Çrş Kas 18 22:12:17 2015] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[Çrş Kas 18 22:12:17 2015] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[Çrş Kas 18 22:12:17 2015] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[Çrş Kas 18 22:12:17 2015] intel_rapl: Found RAPL domain package
[Çrş Kas 18 22:12:17 2015] intel_rapl: Found RAPL domain core
[Çrş Kas 18 22:12:17 2015] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[Çrş Kas 18 22:12:18 2015] Bluetooth: Core ver 2.20
[Çrş Kas 18 22:12:18 2015] NET: Registered protocol family 31
[Çrş Kas 18 22:12:18 2015] Bluetooth: HCI device and connection manager initialized
[Çrş Kas 18 22:12:18 2015] Bluetooth: HCI socket layer initialized
[Çrş Kas 18 22:12:18 2015] Bluetooth: L2CAP socket layer initialized
[Çrş Kas 18 22:12:18 2015] Bluetooth: SCO socket layer initialized
[Çrş Kas 18 22:12:18 2015] media: Linux media interface: v0.10
[Çrş Kas 18 22:12:18 2015] Linux video capture interface: v2.00
[Çrş Kas 18 22:12:18 2015] nvidia: module license 'NVIDIA' taints kernel.
[Çrş Kas 18 22:12:18 2015] Disabling lock debugging due to kernel taint
[Çrş Kas 18 22:12:18 2015] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[Çrş Kas 18 22:12:18 2015] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[Çrş Kas 18 22:12:18 2015] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[Çrş Kas 18 22:12:18 2015] NVRM: loading NVIDIA UNIX x86 Kernel Module  352.41  Fri Aug 21 22:11:31 PDT 2015
[Çrş Kas 18 22:12:18 2015] usbcore: registered new interface driver btusb
[Çrş Kas 18 22:12:18 2015] uvcvideo: Found UVC 1.00 device Sony Visual Communication Camera (04f2:b28a)
[Çrş Kas 18 22:12:18 2015] input: Sony Visual Communication Camer as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input14
[Çrş Kas 18 22:12:18 2015] usbcore: registered new interface driver uvcvideo
[Çrş Kas 18 22:12:18 2015] USB Video Class driver (1.1.1)
[Çrş Kas 18 22:12:19 2015] cfg80211: World regulatory domain updated:
[Çrş Kas 18 22:12:19 2015] cfg80211:  DFS Master region: unset
[Çrş Kas 18 22:12:19 2015] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[Çrş Kas 18 22:12:19 2015] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[Çrş Kas 18 22:12:19 2015] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[Çrş Kas 18 22:12:19 2015] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[Çrş Kas 18 22:12:19 2015] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[Çrş Kas 18 22:12:19 2015] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[Çrş Kas 18 22:12:19 2015] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[Çrş Kas 18 22:12:19 2015] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[Çrş Kas 18 22:12:19 2015] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[Çrş Kas 18 22:12:19 2015] usbcore: registered new interface driver ath3k
[Çrş Kas 18 22:12:20 2015] usb 1-1.5: USB disconnect, device number 4
[Çrş Kas 18 22:12:20 2015] usb 1-1.5: new full-speed USB device number 5 using ehci-pci
[Çrş Kas 18 22:12:20 2015] usb 1-1.5: New USB device found, idVendor=0cf3, idProduct=3005
[Çrş Kas 18 22:12:20 2015] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Çrş Kas 18 22:12:21 2015] audit: type=1400 audit(1447859541.748:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=580 comm="apparmor_parser"
[Çrş Kas 18 22:12:21 2015] audit: type=1400 audit(1447859541.748:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=580 comm="apparmor_parser"
[Çrş Kas 18 22:12:21 2015] audit: type=1400 audit(1447859541.760:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=580 comm="apparmor_parser"
[Çrş Kas 18 22:12:21 2015] audit: type=1400 audit(1447859541.760:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=580 comm="apparmor_parser"
[Çrş Kas 18 22:12:21 2015] audit: type=1400 audit(1447859541.760:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=580 comm="apparmor_parser"
[Çrş Kas 18 22:12:21 2015] audit: type=1400 audit(1447859541.760:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=580 comm="apparmor_parser"
[Çrş Kas 18 22:12:21 2015] audit: type=1400 audit(1447859541.940:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=580 comm="apparmor_parser"
[Çrş Kas 18 22:12:21 2015] audit: type=1400 audit(1447859541.940:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=580 comm="apparmor_parser"
[Çrş Kas 18 22:12:21 2015] audit: type=1400 audit(1447859541.940:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=580 comm="apparmor_parser"
[Çrş Kas 18 22:12:21 2015] audit: type=1400 audit(1447859541.940:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=580 comm="apparmor_parser"
[Çrş Kas 18 22:13:43 2015] cgroup: new mount options do not match the existing superblock, will be ignored
[Çrş Kas 18 22:13:43 2015] vboxdrv: Found 4 processor cores
[Çrş Kas 18 22:13:43 2015] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Çrş Kas 18 22:13:43 2015] Bluetooth: BNEP filters: protocol multicast
[Çrş Kas 18 22:13:43 2015] vboxdrv: TSC mode is Invariant, tentative frequency 2494328318 Hz
[Çrş Kas 18 22:13:43 2015] vboxdrv: Successfully loaded version 5.0.8 (interface 0x00240000)
[Çrş Kas 18 22:13:43 2015] Bluetooth: BNEP socket layer initialized
[Çrş Kas 18 22:13:43 2015] VBoxNetFlt: Successfully started.
[Çrş Kas 18 22:13:43 2015] VBoxNetAdp: Successfully started.
[Çrş Kas 18 22:13:43 2015] VBoxPciLinuxInit
[Çrş Kas 18 22:13:43 2015] vboxpci: IOMMU not found (not registered)
[Çrş Kas 18 22:13:44 2015] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[Çrş Kas 18 22:13:44 2015] r8169 0000:13:00.0 eth0: link down
[Çrş Kas 18 22:13:44 2015] r8169 0000:13:00.0 eth0: link down
[Çrş Kas 18 22:13:44 2015] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[Çrş Kas 18 22:13:44 2015] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[Çrş Kas 18 22:13:46 2015] r8169 0000:13:00.0 eth0: link up
[Çrş Kas 18 22:13:46 2015] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[Çrş Kas 18 22:13:52 2015] Bluetooth: RFCOMM TTY layer initialized
[Çrş Kas 18 22:13:52 2015] Bluetooth: RFCOMM socket layer initialized
[Çrş Kas 18 22:13:52 2015] Bluetooth: RFCOMM ver 1.11
[Çrş Kas 18 23:37:19 2015] perf interrupt took too long (2597 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[Prş Kas 19 01:47:32 2015] perf interrupt took too long (5018 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[Prş Kas 19 07:15:10 2015] usb 2-1.2: USB disconnect, device number 3
[Prş Kas 19 07:15:10 2015] usb 2-1.2: new low-speed USB device number 4 using ehci-pci
[Prş Kas 19 07:15:11 2015] usb 2-1.2: new low-speed USB device number 5 using ehci-pci
[Prş Kas 19 07:15:11 2015] usb 2-1.2: New USB device found, idVendor=0000, idProduct=0538
[Prş Kas 19 07:15:11 2015] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Prş Kas 19 07:15:11 2015] usb 2-1.2: Product:  USB OPTICAL MOUSE
[Prş Kas 19 07:15:11 2015] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:0000:0538.0002/input/input15
[Prş Kas 19 07:15:11 2015] hid-generic 0003:0000:0538.0002: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[Prş Kas 19 07:15:11 2015] usb 2-1.2: USB disconnect, device number 5
tthacktt@tthacktt:~$


[heartsmagic]

Şu an nispeten normal görünüyor açılış, bir dakika elli saniye kadar sürmüş. En fazla bekleme eğer yanlış anlamıyorsam "cgroup: new mount options do not match the existing superblock, will be ignored" aşamasında yaşanıyor, yaklaşık yirmi saniye. Elle tutulur bir bilgi göremedim bu konuda, bir böcek olabilir. Diğer beklemeler normal, biraz da Bluetooth aşamasında bekliyor altı saniye kadar. Fare takılı olmayınca çok aşırı olan beklemeler sona ermiş.

[tthacktt]

Yaniliyorsunuz, sadece 2dk olsa zaten bunun icin ne sikayet ederim nede boyle soru acarim. Bu verdiginiz sureler verdigi hata ekrani kaybolup, acilis ekranina kadar gecen siyah ekran suresi muhtemelen. Ben laptopun acilis dugmesine bastiktan sonra, sistemn tamamen acilmasi ve masaustunu gormem ortalama 18dk suruyor. Bazan bu sure 25dk ustune cikiyor ki, 3 defa 30dk gordum.