Elementary Os açılış hızını artırmak

Başlatan blaxsES, 31 Ekim 2015 - 14:18:24

« önceki - sonraki »

0 Üyeler ve 6 Ziyaretçi konuyu incelemekte.

blaxsES

arkadaşlar: işletimim elementary os 0.3.1 freya 32 bit built on ubuntu 14.04
kapanırken çok hızlı kapanıyor memnunum fakat açılış baya uzun sürüyor oick boot (nasıl yazılıyosa hatırlayamadım) kapalı
nasıl açılışı hızlandırırım
yardımlarınızı bekliyorum

natgho

Büyük harfle yazmak sanal ortamda bağırmak anlamına gelmektedir, bağırmanıza geek yok, biz sizi duyuyoruz :)
Elementary arayüze önem veren bir dağıtım, dolayısıyla başlangıçta bir çok şeyi aktif etmekte, bu gün 1 kişiden daha okudum açılıştaki yavaşlığını, konfügrasyonu kendiniz yaparsanız bunun önüne geçebilirsiniz, ancak hazır bir dağıtıma bırakırsanız elbette bu tarz sekmeler olacaktır.
dmesg -T > dmesg.logŞu komutu çalıştırın, bilgisayarı yeniden başlatın, ana dizininizde bu dosya oluşacaktır, onu buraya aktarırsanız inceleme fırsatımız olur, ekstra sistemi kasan bir şey var mı görmüş oluruz.
Hayır ben Windows Düşmanı Değilim,Bu Yüzden Linux Kullanmıyorum, Ben Sadece Benim Donanımımda At Koşturacaksa Bir Yazılım, her Adımını Bilme Sorumluluğunu Hisseden Bir Teknologtan Fazlası olmadığım İçin Linux Kullanıcısıyım.

betseg

Ayrıca bu bölümün adı [Nasıl] "Anlatımları", konuyu daha uygun bir yere taşıyalım.

blaxsES

Alıntı yapılan: natgho - 31 Ekim 2015 - 14:28:07
Büyük harfle yazmak sanal ortamda bağırmak anlamına gelmektedir, bağırmanıza geek yok, biz sizi duyuyoruz :)
Elementary arayüze önem veren bir dağıtım, dolayısıyla başlangıçta bir çok şeyi aktif etmekte, bu gün 1 kişiden daha okudum açılıştaki yavaşlığını, konfügrasyonu kendiniz yaparsanız bunun önüne geçebilirsiniz, ancak hazır bir dağıtıma bırakırsanız elbette bu tarz sekmeler olacaktır.
dmesg -T > dmesg.logŞu komutu çalıştırın, bilgisayarı yeniden başlatın, ana dizininizde bu dosya oluşacaktır, onu buraya aktarırsanız inceleme fırsatımız olur, ekstra sistemi kasan bir şey var mı görmüş oluruz.


sayın 'natgho ' Quietboot diye bir şey var bios ayarlarında onu kapattığım vakit bilğisayarımın açılış süresi : 1dk 10 sn sürüyor
ama Quietboot açtığım vakit açılış süresi : 43 sn sürüyor
her ikisinde de kapanma süresi :5-6 sn arası bişey
bana dediğinizi yaptım
buyrun

[Cts Eki 31 16:18:43 2015] Initializing cgroup subsys cpuset
[Cts Eki 31 16:18:43 2015] Initializing cgroup subsys cpu
[Cts Eki 31 16:18:43 2015] Initializing cgroup subsys cpuacct
[Cts Eki 31 16:18:43 2015] Linux version 3.19.0-31-generic (buildd@lgw01-55) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #36~14.04.1-Ubuntu SMP Thu Oct 8 17:59:01 UTC 2015 (Ubuntu 3.19.0-31.36~14.04.1-generic 3.19.8-ckt7)
[Cts Eki 31 16:18:43 2015] KERNEL supported cpus:
[Cts Eki 31 16:18:43 2015]   Intel GenuineIntel
[Cts Eki 31 16:18:43 2015]   AMD AuthenticAMD
[Cts Eki 31 16:18:43 2015]   NSC Geode by NSC
[Cts Eki 31 16:18:43 2015]   Cyrix CyrixInstead
[Cts Eki 31 16:18:43 2015]   Centaur CentaurHauls
[Cts Eki 31 16:18:43 2015]   Transmeta GenuineTMx86
[Cts Eki 31 16:18:43 2015]   Transmeta TransmetaCPU
[Cts Eki 31 16:18:43 2015]   UMC UMC UMC UMC
[Cts Eki 31 16:18:43 2015] e820: BIOS-provided physical RAM map:
[Cts Eki 31 16:18:43 2015] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[Cts Eki 31 16:18:43 2015] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[Cts Eki 31 16:18:43 2015] BIOS-e820: [mem 0x00000000000e3000-0x00000000000fffff] reserved
[Cts Eki 31 16:18:43 2015] BIOS-e820: [mem 0x0000000000100000-0x000000007ff9ffff] usable
[Cts Eki 31 16:18:43 2015] BIOS-e820: [mem 0x000000007ffa0000-0x000000007ffadfff] ACPI data
[Cts Eki 31 16:18:43 2015] BIOS-e820: [mem 0x000000007ffae000-0x000000007ffeffff] ACPI NVS
[Cts Eki 31 16:18:43 2015] BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] reserved
[Cts Eki 31 16:18:43 2015] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[Cts Eki 31 16:18:43 2015] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[Cts Eki 31 16:18:43 2015] NX (Execute Disable) protection: active
[Cts Eki 31 16:18:43 2015] SMBIOS 2.4 present.
[Cts Eki 31 16:18:43 2015] DMI: ASUSTeK Computer Inc.         F3Sa                /F3Sa      , BIOS 301     12/25/2007
[Cts Eki 31 16:18:43 2015] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[Cts Eki 31 16:18:43 2015] e820: remove [mem 0x000a0000-0x000fffff] usable
[Cts Eki 31 16:18:43 2015] e820: last_pfn = 0x7ffa0 max_arch_pfn = 0x1000000
[Cts Eki 31 16:18:43 2015] MTRR default type: uncachable
[Cts Eki 31 16:18:43 2015] MTRR fixed ranges enabled:
[Cts Eki 31 16:18:43 2015]   00000-9FFFF write-back
[Cts Eki 31 16:18:43 2015]   A0000-BFFFF uncachable
[Cts Eki 31 16:18:43 2015]   C0000-CFFFF write-protect
[Cts Eki 31 16:18:43 2015]   D0000-DFFFF uncachable
[Cts Eki 31 16:18:43 2015]   E0000-EFFFF write-through
[Cts Eki 31 16:18:43 2015]   F0000-FFFFF write-protect
[Cts Eki 31 16:18:43 2015] MTRR variable ranges enabled:
[Cts Eki 31 16:18:43 2015]   0 base 000000000 mask F80000000 write-back
[Cts Eki 31 16:18:43 2015]   1 disabled
[Cts Eki 31 16:18:43 2015]   2 disabled
[Cts Eki 31 16:18:43 2015]   3 disabled
[Cts Eki 31 16:18:43 2015]   4 disabled
[Cts Eki 31 16:18:43 2015]   5 disabled
[Cts Eki 31 16:18:43 2015]   6 disabled
[Cts Eki 31 16:18:43 2015]   7 disabled
[Cts Eki 31 16:18:43 2015] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC 
[Cts Eki 31 16:18:43 2015] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[Cts Eki 31 16:18:43 2015] Scanning 1 areas for low memory corruption
[Cts Eki 31 16:18:43 2015] initial memory mapped: [mem 0x00000000-0x021fffff]
[Cts Eki 31 16:18:43 2015] Base memory trampoline at [c009b000] 9b000 size 16384
[Cts Eki 31 16:18:43 2015] init_memory_mapping: [mem 0x00000000-0x000fffff]
[Cts Eki 31 16:18:43 2015]  [mem 0x00000000-0x000fffff] page 4k
[Cts Eki 31 16:18:43 2015] init_memory_mapping: [mem 0x37800000-0x379fffff]
[Cts Eki 31 16:18:43 2015]  [mem 0x37800000-0x379fffff] page 2M
[Cts Eki 31 16:18:43 2015] init_memory_mapping: [mem 0x20000000-0x377fffff]
[Cts Eki 31 16:18:43 2015]  [mem 0x20000000-0x377fffff] page 2M
[Cts Eki 31 16:18:43 2015] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[Cts Eki 31 16:18:43 2015]  [mem 0x00100000-0x001fffff] page 4k
[Cts Eki 31 16:18:43 2015]  [mem 0x00200000-0x1fffffff] page 2M
[Cts Eki 31 16:18:43 2015] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[Cts Eki 31 16:18:43 2015]  [mem 0x37a00000-0x37bfdfff] page 4k
[Cts Eki 31 16:18:43 2015] BRK [0x01c2c000, 0x01c2cfff] PGTABLE
[Cts Eki 31 16:18:43 2015] BRK [0x01c2d000, 0x01c2dfff] PGTABLE
[Cts Eki 31 16:18:43 2015] RAMDISK: [mem 0x34a24000-0x36509fff]
[Cts Eki 31 16:18:43 2015] ACPI: Early table checksum verification disabled
[Cts Eki 31 16:18:43 2015] ACPI: RSDP 0x000F8220 000024 (v02 ACPIAM)
[Cts Eki 31 16:18:43 2015] ACPI: XSDT 0x7FFA0100 00007C (v01 _ASUS_ Notebook 12000725 MSFT 00000097)
[Cts Eki 31 16:18:43 2015] ACPI: FACP 0x7FFA0290 0000F4 (v03 A_M_I_ OEMFACP  12000725 MSFT 00000097)
[Cts Eki 31 16:18:43 2015] ACPI: DSDT 0x7FFA0680 00B505 (v01 F3Sa0  F3Sa0301 00000301 INTL 20051117)
[Cts Eki 31 16:18:43 2015] ACPI: FACS 0x7FFAE000 000040
[Cts Eki 31 16:18:43 2015] ACPI: FACS 0x7FFAE000 000040
[Cts Eki 31 16:18:43 2015] ACPI: APIC 0x7FFA0390 00005C (v01 A_M_I_ OEMAPIC  12000725 MSFT 00000097)
[Cts Eki 31 16:18:43 2015] ACPI: MCFG 0x7FFA0430 00003C (v01 A_M_I_ OEMMCFG  12000725 MSFT 00000097)
[Cts Eki 31 16:18:43 2015] ACPI: SLIC 0x7FFA0470 000176 (v01 _ASUS_ Notebook 12000725 MSFT 00000097)
[Cts Eki 31 16:18:43 2015] ACPI: DBGP 0x7FFA03F0 000034 (v01 A_M_I_ OEMDBGP  12000725 MSFT 00000097)
[Cts Eki 31 16:18:43 2015] ACPI: BOOT 0x7FFA05F0 000028 (v01 A_M_I_ OEMBOOT  12000725 MSFT 00000097)
[Cts Eki 31 16:18:43 2015] ACPI: ECDT 0x7FFA0620 000054 (v01 A_M_I_ OEMECDT  12000725 MSFT 00000097)
[Cts Eki 31 16:18:43 2015] ACPI: OEMB 0x7FFAE040 000060 (v01 A_M_I_ AMI_OEM  12000725 MSFT 00000097)
[Cts Eki 31 16:18:43 2015] ACPI: HPET 0x7FFABB90 000038 (v01 A_M_I_ OEMHPET  12000725 MSFT 00000097)
[Cts Eki 31 16:18:43 2015] ACPI: ATKG 0x7FFAE2A0 008024 (v01 A_M_I_ OEMATKG  05000702 MSFT 00000097)
[Cts Eki 31 16:18:43 2015] ACPI: SSDT 0x7FFB6E20 0004E6 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[Cts Eki 31 16:18:43 2015] ACPI: Local APIC address 0xfee00000
[Cts Eki 31 16:18:43 2015] 1155MB HIGHMEM available.
[Cts Eki 31 16:18:43 2015] 891MB LOWMEM available.
[Cts Eki 31 16:18:43 2015]   mapped low ram: 0 - 37bfe000
[Cts Eki 31 16:18:43 2015]   low ram: 0 - 37bfe000
[Cts Eki 31 16:18:43 2015] Zone ranges:
[Cts Eki 31 16:18:43 2015]   DMA      [mem 0x00001000-0x00ffffff]
[Cts Eki 31 16:18:43 2015]   Normal   [mem 0x01000000-0x37bfdfff]
[Cts Eki 31 16:18:43 2015]   HighMem  [mem 0x37bfe000-0x7ff9ffff]
[Cts Eki 31 16:18:43 2015] Movable zone start for each node
[Cts Eki 31 16:18:43 2015] Early memory node ranges
[Cts Eki 31 16:18:43 2015]   node   0: [mem 0x00001000-0x0009efff]
[Cts Eki 31 16:18:43 2015]   node   0: [mem 0x00100000-0x7ff9ffff]
[Cts Eki 31 16:18:43 2015] Initmem setup node 0 [mem 0x00001000-0x7ff9ffff]
[Cts Eki 31 16:18:43 2015] On node 0 totalpages: 524094
[Cts Eki 31 16:18:43 2015]   DMA zone: 40 pages used for memmap
[Cts Eki 31 16:18:43 2015]   DMA zone: 0 pages reserved
[Cts Eki 31 16:18:43 2015]   DMA zone: 3998 pages, LIFO batch:0
[Cts Eki 31 16:18:43 2015]   Normal zone: 2190 pages used for memmap
[Cts Eki 31 16:18:43 2015]   Normal zone: 224254 pages, LIFO batch:31
[Cts Eki 31 16:18:43 2015]   HighMem zone: 295842 pages, LIFO batch:31
[Cts Eki 31 16:18:43 2015] Using APIC driver default
[Cts Eki 31 16:18:43 2015] ACPI: PM-Timer IO Port: 0x808
[Cts Eki 31 16:18:43 2015] ACPI: Local APIC address 0xfee00000
[Cts Eki 31 16:18:43 2015] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[Cts Eki 31 16:18:43 2015] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[Cts Eki 31 16:18:43 2015] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[Cts Eki 31 16:18:43 2015] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[Cts Eki 31 16:18:43 2015] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[Cts Eki 31 16:18:43 2015] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[Cts Eki 31 16:18:43 2015] ACPI: IRQ0 used by override.
[Cts Eki 31 16:18:43 2015] ACPI: IRQ9 used by override.
[Cts Eki 31 16:18:43 2015] Using ACPI (MADT) for SMP configuration information
[Cts Eki 31 16:18:43 2015] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[Cts Eki 31 16:18:43 2015] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[Cts Eki 31 16:18:43 2015] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[Cts Eki 31 16:18:43 2015] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[Cts Eki 31 16:18:43 2015] PM: Registered nosave memory: [mem 0x000a0000-0x000e2fff]
[Cts Eki 31 16:18:43 2015] PM: Registered nosave memory: [mem 0x000e3000-0x000fffff]
[Cts Eki 31 16:18:43 2015] e820: [mem 0x80000000-0xfedfffff] available for PCI devices
[Cts Eki 31 16:18:43 2015] Booting paravirtualized kernel on bare hardware
[Cts Eki 31 16:18:43 2015] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[Cts Eki 31 16:18:43 2015] PERCPU: Embedded 17 pages/cpu @f67b5000 s39360 r0 d30272 u69632
[Cts Eki 31 16:18:43 2015] pcpu-alloc: s39360 r0 d30272 u69632 alloc=17*4096
[Cts Eki 31 16:18:43 2015] pcpu-alloc: [0] 0 [0] 1
[Cts Eki 31 16:18:43 2015] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 521864
[Cts Eki 31 16:18:43 2015] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-31-generic root=UUID=a1b2366d-042e-46d1-9618-1c957ba51e4e ro quiet splash vt.handoff=7
[Cts Eki 31 16:18:43 2015] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Cts Eki 31 16:18:43 2015] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Cts Eki 31 16:18:43 2015] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Cts Eki 31 16:18:43 2015] Initializing CPU#0
[Cts Eki 31 16:18:43 2015] Initializing HighMem for node 0 (00037bfe:0007ffa0)
[Cts Eki 31 16:18:43 2015] Initializing Movable for node 0 (00000000:00000000)
[Cts Eki 31 16:18:43 2015] Memory: 2034716K/2096376K available (6951K kernel code, 670K rwdata, 3004K rodata, 932K init, 788K bss, 61660K reserved, 0K cma-reserved, 1183368K highmem)
[Cts Eki 31 16:18:43 2015] virtual kernel memory layout:
[Cts Eki 31 16:18:43 2015]     fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
[Cts Eki 31 16:18:43 2015]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[Cts Eki 31 16:18:43 2015]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[Cts Eki 31 16:18:43 2015]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[Cts Eki 31 16:18:43 2015]       .init : 0xc1a64000 - 0xc1b4d000   ( 932 kB)
[Cts Eki 31 16:18:43 2015]       .data : 0xc16c9fd0 - 0xc1a62b40   (3682 kB)
[Cts Eki 31 16:18:43 2015]       .text : 0xc1000000 - 0xc16c9fd0   (6951 kB)
[Cts Eki 31 16:18:43 2015] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[Cts Eki 31 16:18:43 2015] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[Cts Eki 31 16:18:43 2015] Hierarchical RCU implementation.
[Cts Eki 31 16:18:43 2015] RCU dyntick-idle grace-period acceleration is enabled.
[Cts Eki 31 16:18:43 2015] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[Cts Eki 31 16:18:43 2015] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[Cts Eki 31 16:18:43 2015] NR_IRQS:2304 nr_irqs:440 16
[Cts Eki 31 16:18:43 2015] CPU 0 irqstacks, hard=f4436000 soft=f4438000
[Cts Eki 31 16:18:43 2015] vt handoff: transparent VT on vt#7
[Cts Eki 31 16:18:43 2015] Console: colour dummy device 80x25
[Cts Eki 31 16:18:43 2015] console [tty0] enabled
[Cts Eki 31 16:18:43 2015] hpet clockevent registered
[Cts Eki 31 16:18:43 2015] tsc: Fast TSC calibration using PIT
[Cts Eki 31 16:18:43 2015] tsc: Detected 2394.055 MHz processor
[Cts Eki 31 16:18:43 2015] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.11 BogoMIPS (lpj=9576220)
[Cts Eki 31 16:18:43 2015] pid_max: default: 32768 minimum: 301
[Cts Eki 31 16:18:43 2015] ACPI: Core revision 20141107
[Cts Eki 31 16:18:43 2015] ACPI: All ACPI Tables successfully acquired
[Cts Eki 31 16:18:43 2015] Security Framework initialized
[Cts Eki 31 16:18:43 2015] AppArmor: AppArmor initialized
[Cts Eki 31 16:18:43 2015] Yama: becoming mindful.
[Cts Eki 31 16:18:43 2015] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Cts Eki 31 16:18:43 2015] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Cts Eki 31 16:18:43 2015] Initializing cgroup subsys memory
[Cts Eki 31 16:18:43 2015] Initializing cgroup subsys devices
[Cts Eki 31 16:18:43 2015] Initializing cgroup subsys freezer
[Cts Eki 31 16:18:43 2015] Initializing cgroup subsys net_cls
[Cts Eki 31 16:18:43 2015] Initializing cgroup subsys blkio
[Cts Eki 31 16:18:43 2015] Initializing cgroup subsys perf_event
[Cts Eki 31 16:18:43 2015] Initializing cgroup subsys net_prio
[Cts Eki 31 16:18:43 2015] Initializing cgroup subsys hugetlb
[Cts Eki 31 16:18:43 2015] CPU: Physical Processor ID: 0
[Cts Eki 31 16:18:43 2015] CPU: Processor Core ID: 0
[Cts Eki 31 16:18:43 2015] mce: CPU supports 6 MCE banks
[Cts Eki 31 16:18:43 2015] CPU0: Thermal monitoring handled by SMI
[Cts Eki 31 16:18:43 2015] process: using mwait in idle threads
[Cts Eki 31 16:18:43 2015] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[Cts Eki 31 16:18:43 2015] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[Cts Eki 31 16:18:43 2015] Freeing SMP alternatives memory: 32K (c1b4d000 - c1b55000)
[Cts Eki 31 16:18:43 2015] ftrace: allocating 29330 entries in 58 pages
[Cts Eki 31 16:18:43 2015] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[Cts Eki 31 16:18:43 2015] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[Cts Eki 31 16:18:43 2015] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
[Cts Eki 31 16:18:43 2015] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[Cts Eki 31 16:18:43 2015] perf_event_intel: PEBS disabled due to CPU errata
[Cts Eki 31 16:18:43 2015] ... version:                2
[Cts Eki 31 16:18:43 2015] ... bit width:              40
[Cts Eki 31 16:18:43 2015] ... generic registers:      2
[Cts Eki 31 16:18:43 2015] ... value mask:             000000ffffffffff
[Cts Eki 31 16:18:43 2015] ... max period:             000000007fffffff
[Cts Eki 31 16:18:43 2015] ... fixed-purpose events:   3
[Cts Eki 31 16:18:43 2015] ... event mask:             0000000700000003
[Cts Eki 31 16:18:43 2015] CPU 1 irqstacks, hard=f455c000 soft=f455e000
[Cts Eki 31 16:18:43 2015] x86: Booting SMP configuration:
[Cts Eki 31 16:18:43 2015] .... node  #0, CPUs:      #1
[Cts Eki 31 16:18:43 2015] Initializing CPU#1
[Cts Eki 31 16:18:43 2015] CPU1: Thermal monitoring handled by SMI
[Cts Eki 31 16:18:43 2015] x86: Booted up 1 node, 2 CPUs
[Cts Eki 31 16:18:43 2015] smpboot: Total of 2 processors activated (9576.22 BogoMIPS)
[Cts Eki 31 16:18:43 2015] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[Cts Eki 31 16:18:43 2015] devtmpfs: initialized
[Cts Eki 31 16:18:43 2015] evm: security.selinux
[Cts Eki 31 16:18:43 2015] evm: security.SMACK64
[Cts Eki 31 16:18:43 2015] evm: security.SMACK64EXEC
[Cts Eki 31 16:18:43 2015] evm: security.SMACK64TRANSMUTE
[Cts Eki 31 16:18:43 2015] evm: security.SMACK64MMAP
[Cts Eki 31 16:18:43 2015] evm: security.ima
[Cts Eki 31 16:18:43 2015] evm: security.capability
[Cts Eki 31 16:18:43 2015] PM: Registering ACPI NVS region [mem 0x7ffae000-0x7ffeffff] (270336 bytes)
[Cts Eki 31 16:18:43 2015] pinctrl core: initialized pinctrl subsystem
[Cts Eki 31 16:18:43 2015] RTC time: 13:18:43, date: 10/31/15
[Cts Eki 31 16:18:43 2015] NET: Registered protocol family 16
[Cts Eki 31 16:18:43 2015] EISA bus registered
[Cts Eki 31 16:18:43 2015] cpuidle: using governor ladder
[Cts Eki 31 16:18:43 2015] cpuidle: using governor menu
[Cts Eki 31 16:18:43 2015] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[Cts Eki 31 16:18:43 2015] ACPI: bus type PCI registered
[Cts Eki 31 16:18:43 2015] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[Cts Eki 31 16:18:43 2015] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[Cts Eki 31 16:18:43 2015] PCI: not using MMCONFIG
[Cts Eki 31 16:18:43 2015] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[Cts Eki 31 16:18:43 2015] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=9
[Cts Eki 31 16:18:43 2015] PCI: Using configuration type 1 for base access
[Cts Eki 31 16:18:43 2015] mtrr: your CPUs had inconsistent variable MTRR settings
[Cts Eki 31 16:18:43 2015] mtrr: probably your BIOS does not setup all CPUs.
[Cts Eki 31 16:18:43 2015] mtrr: corrected configuration.
[Cts Eki 31 16:18:43 2015] ACPI: Added _OSI(Module Device)
[Cts Eki 31 16:18:43 2015] ACPI: Added _OSI(Processor Device)
[Cts Eki 31 16:18:43 2015] ACPI: Added _OSI(3.0 _SCP Extensions)
[Cts Eki 31 16:18:43 2015] ACPI: Added _OSI(Processor Aggregator Device)
[Cts Eki 31 16:18:43 2015] ACPI : EC: EC description table is found, configuring boot EC
[Cts Eki 31 16:18:43 2015] ACPI: Executed 1 blocks of module-level executable AML code
[Cts Eki 31 16:18:43 2015] ACPI: Dynamic OEM Table Load:
[Cts Eki 31 16:18:43 2015] ACPI: SSDT 0xF45C9400 0002C8 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[Cts Eki 31 16:18:43 2015] ACPI: Dynamic OEM Table Load:
[Cts Eki 31 16:18:43 2015] ACPI: SSDT 0xF4411800 000712 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[Cts Eki 31 16:18:43 2015] ACPI: Dynamic OEM Table Load:
[Cts Eki 31 16:18:43 2015] ACPI: SSDT 0xF45F3100 0000C8 (v01 PmRef  Cpu1Ist  00003000 INTL 20051117)
[Cts Eki 31 16:18:43 2015] ACPI: Dynamic OEM Table Load:
[Cts Eki 31 16:18:43 2015] ACPI: SSDT 0xF45EB3C0 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20051117)
[Cts Eki 31 16:18:43 2015] ACPI: Interpreter enabled
[Cts Eki 31 16:18:43 2015] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[Cts Eki 31 16:18:43 2015] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[Cts Eki 31 16:18:43 2015] ACPI: (supports S0 S3 S4 S5)
[Cts Eki 31 16:18:43 2015] ACPI: Using IOAPIC for interrupt routing
[Cts Eki 31 16:18:43 2015] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[Cts Eki 31 16:18:43 2015] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in ACPI motherboard resources
[Cts Eki 31 16:18:43 2015] PCI: Using MMCONFIG for extended config space
[Cts Eki 31 16:18:43 2015] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Cts Eki 31 16:18:43 2015] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[Cts Eki 31 16:18:43 2015] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[Cts Eki 31 16:18:43 2015] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[Cts Eki 31 16:18:43 2015] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[Cts Eki 31 16:18:43 2015] PCI host bridge to bus 0000:00
[Cts Eki 31 16:18:43 2015] pci_bus 0000:00: root bus resource [bus 00-ff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[Cts Eki 31 16:18:43 2015] pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
[Cts Eki 31 16:18:43 2015] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[Cts Eki 31 16:18:43 2015] pci 0000:00:01.0: System wakeup disabled by ACPI
[Cts Eki 31 16:18:43 2015] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[Cts Eki 31 16:18:43 2015] pci 0000:00:1a.0: reg 0x20: [io  0xe000-0xe01f]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1a.0: System wakeup disabled by ACPI
[Cts Eki 31 16:18:43 2015] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[Cts Eki 31 16:18:43 2015] pci 0000:00:1a.1: reg 0x20: [io  0xdc00-0xdc1f]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1a.1: System wakeup disabled by ACPI
[Cts Eki 31 16:18:43 2015] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[Cts Eki 31 16:18:43 2015] pci 0000:00:1a.7: reg 0x10: [mem 0xfebff400-0xfebff7ff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[Cts Eki 31 16:18:43 2015] pci 0000:00:1a.7: System wakeup disabled by ACPI
[Cts Eki 31 16:18:43 2015] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[Cts Eki 31 16:18:43 2015] pci 0000:00:1b.0: reg 0x10: [mem 0xfebf8000-0xfebfbfff 64bit]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[Cts Eki 31 16:18:43 2015] pci 0000:00:1b.0: System wakeup disabled by ACPI
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.0: System wakeup disabled by ACPI
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[Cts Eki 31 16:18:43 2015] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[Cts Eki 31 16:18:43 2015] pci 0000:00:1d.0: reg 0x20: [io  0xd880-0xd89f]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1d.0: System wakeup disabled by ACPI
[Cts Eki 31 16:18:43 2015] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[Cts Eki 31 16:18:43 2015] pci 0000:00:1d.1: reg 0x20: [io  0xd800-0xd81f]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1d.1: System wakeup disabled by ACPI
[Cts Eki 31 16:18:43 2015] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[Cts Eki 31 16:18:43 2015] pci 0000:00:1d.2: reg 0x20: [io  0xd480-0xd49f]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1d.2: System wakeup disabled by ACPI
[Cts Eki 31 16:18:43 2015] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[Cts Eki 31 16:18:43 2015] pci 0000:00:1d.7: reg 0x10: [mem 0xfebff000-0xfebff3ff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[Cts Eki 31 16:18:43 2015] pci 0000:00:1d.7: System wakeup disabled by ACPI
[Cts Eki 31 16:18:43 2015] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[Cts Eki 31 16:18:43 2015] pci 0000:00:1e.0: System wakeup disabled by ACPI
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.0: can't claim BAR 13 [io  0x0800-0x087f]: address conflict with ACPI CPU throttle [io  0x0810-0x0815]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0250 (mask 000f)
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.1: reg 0x18: [io  0x08f0-0x08f7]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.1: reg 0x1c: [io  0x08f8-0x08fb]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.1: reg 0x20: [io  0xffa0-0xffaf]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.2: [8086:2828] type 00 class 0x01018f
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.2: reg 0x10: [io  0xec00-0xec07]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.2: reg 0x14: [io  0xe880-0xe883]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.2: reg 0x18: [io  0xe800-0xe807]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.2: reg 0x1c: [io  0xe480-0xe483]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.2: reg 0x20: [io  0xe400-0xe40f]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.2: reg 0x24: [io  0xe080-0xe08f]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.2: PME# supported from D3hot
[Cts Eki 31 16:18:43 2015] pci 0000:01:00.0: [1002:9581] type 00 class 0x030000
[Cts Eki 31 16:18:43 2015] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[Cts Eki 31 16:18:43 2015] pci 0000:01:00.0: reg 0x14: [io  0xa000-0xa0ff]
[Cts Eki 31 16:18:43 2015] pci 0000:01:00.0: reg 0x18: [mem 0xfdef0000-0xfdefffff]
[Cts Eki 31 16:18:43 2015] pci 0000:01:00.0: reg 0x30: [mem 0xfdec0000-0xfdedffff pref]
[Cts Eki 31 16:18:43 2015] pci 0000:01:00.0: supports D1 D2
[Cts Eki 31 16:18:43 2015] pci 0000:00:01.0: PCI bridge to [bus 01]
[Cts Eki 31 16:18:43 2015] pci 0000:00:01.0:   bridge window [io  0x8000-0xafff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:01.0:   bridge window [mem 0xfde00000-0xfdefffff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:01.0:   bridge window [mem 0xdbd00000-0xfbcfffff 64bit pref]
[Cts Eki 31 16:18:43 2015] pci 0000:02:00.0: [1969:1048] type 00 class 0x020000
[Cts Eki 31 16:18:43 2015] pci 0000:02:00.0: reg 0x10: [mem 0xfdfc0000-0xfdffffff 64bit]
[Cts Eki 31 16:18:43 2015] pci 0000:02:00.0: reg 0x30: [mem 0xfdfa0000-0xfdfbffff pref]
[Cts Eki 31 16:18:43 2015] pci 0000:02:00.0: PME# supported from D3hot D3cold
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.0: PCI bridge to [bus 02]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff]
[Cts Eki 31 16:18:43 2015] pci 0000:03:00.0: [8086:4229] type 00 class 0x028000
[Cts Eki 31 16:18:43 2015] pci 0000:03:00.0: reg 0x10: [mem 0xfe0fe000-0xfe0fffff 64bit]
[Cts Eki 31 16:18:43 2015] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.1: PCI bridge to [bus 03]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.1:   bridge window [mem 0xfe000000-0xfe0fffff]
[Cts Eki 31 16:18:43 2015] pci 0000:04:00.0: [197b:2360] type 00 class 0x010601
[Cts Eki 31 16:18:43 2015] pci 0000:04:00.0: reg 0x10: [io  0xbc00-0xbc07]
[Cts Eki 31 16:18:43 2015] pci 0000:04:00.0: reg 0x14: [io  0xb880-0xb883]
[Cts Eki 31 16:18:43 2015] pci 0000:04:00.0: reg 0x18: [io  0xb800-0xb807]
[Cts Eki 31 16:18:43 2015] pci 0000:04:00.0: reg 0x1c: [io  0xb480-0xb483]
[Cts Eki 31 16:18:43 2015] pci 0000:04:00.0: reg 0x20: [io  0xb400-0xb40f]
[Cts Eki 31 16:18:43 2015] pci 0000:04:00.0: reg 0x24: [mem 0xfe1fe000-0xfe1fffff]
[Cts Eki 31 16:18:43 2015] pci 0000:04:00.0: PME# supported from D3hot
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.2: PCI bridge to [bus 04]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.2:   bridge window [io  0xb000-0xbfff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.2:   bridge window [mem 0xfe100000-0xfe1fffff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.3: PCI bridge to [bus 05]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.4:   bridge window [mem 0xfe200000-0xfe9fffff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.4:   bridge window [mem 0xfbd00000-0xfdcfffff 64bit pref]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.5: PCI bridge to [bus 08]
[Cts Eki 31 16:18:43 2015] pci 0000:09:01.0: [1180:0832] type 00 class 0x0c0010
[Cts Eki 31 16:18:43 2015] pci 0000:09:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
[Cts Eki 31 16:18:43 2015] pci 0000:09:01.0: MMC cards are now supported by standard SDHCI controller
[Cts Eki 31 16:18:43 2015] pci 0000:09:01.0: reg 0x10: [mem 0xfeaff800-0xfeafffff]
[Cts Eki 31 16:18:43 2015] pci 0000:09:01.0: PME# supported from D0 D3hot D3cold
[Cts Eki 31 16:18:43 2015] pci 0000:09:01.1: [1180:0822] type 00 class 0x080500
[Cts Eki 31 16:18:43 2015] pci 0000:09:01.1: reg 0x10: [mem 0xfeaff400-0xfeaff4ff]
[Cts Eki 31 16:18:43 2015] pci 0000:09:01.1: supports D1 D2
[Cts Eki 31 16:18:43 2015] pci 0000:09:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[Cts Eki 31 16:18:43 2015] pci 0000:09:01.2: [1180:0592] type 00 class 0x088000
[Cts Eki 31 16:18:43 2015] pci 0000:09:01.2: reg 0x10: [mem 0xfeafec00-0xfeafecff]
[Cts Eki 31 16:18:43 2015] pci 0000:09:01.2: supports D1 D2
[Cts Eki 31 16:18:43 2015] pci 0000:09:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[Cts Eki 31 16:18:43 2015] pci 0000:09:01.3: [1180:0852] type 00 class 0x088000
[Cts Eki 31 16:18:43 2015] pci 0000:09:01.3: reg 0x10: [mem 0xfeafe800-0xfeafe8ff]
[Cts Eki 31 16:18:43 2015] pci 0000:09:01.3: supports D1 D2
[Cts Eki 31 16:18:43 2015] pci 0000:09:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[Cts Eki 31 16:18:43 2015] pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
[Cts Eki 31 16:18:43 2015] pci 0000:00:1e.0:   bridge window [mem 0xfea00000-0xfeafffff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[Cts Eki 31 16:18:43 2015] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[Cts Eki 31 16:18:43 2015] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[Cts Eki 31 16:18:43 2015] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[Cts Eki 31 16:18:43 2015] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[Cts Eki 31 16:18:43 2015] pci_bus 0000:00: on NUMA node 0
[Cts Eki 31 16:18:43 2015] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[Cts Eki 31 16:18:43 2015] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 12)
[Cts Eki 31 16:18:43 2015] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)
[Cts Eki 31 16:18:43 2015] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 12)
[Cts Eki 31 16:18:43 2015] ACPI: PCI Interrupt Link [LNKE] (IRQs *6)
[Cts Eki 31 16:18:43 2015] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 12)
[Cts Eki 31 16:18:43 2015] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 12)
[Cts Eki 31 16:18:43 2015] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 12)
[Cts Eki 31 16:18:43 2015] ACPI: Enabled 4 GPEs in block 00 to 1F
[Cts Eki 31 16:18:43 2015] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[Cts Eki 31 16:18:43 2015] vgaarb: setting as boot device: PCI:0000:01:00.0
[Cts Eki 31 16:18:43 2015] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[Cts Eki 31 16:18:43 2015] vgaarb: loaded
[Cts Eki 31 16:18:43 2015] vgaarb: bridge control possible 0000:01:00.0
[Cts Eki 31 16:18:43 2015] SCSI subsystem initialized
[Cts Eki 31 16:18:43 2015] libata version 3.00 loaded.
[Cts Eki 31 16:18:43 2015] ACPI: bus type USB registered
[Cts Eki 31 16:18:43 2015] usbcore: registered new interface driver usbfs
[Cts Eki 31 16:18:43 2015] usbcore: registered new interface driver hub
[Cts Eki 31 16:18:43 2015] usbcore: registered new device driver usb
[Cts Eki 31 16:18:43 2015] PCI: Using ACPI for IRQ routing
[Cts Eki 31 16:18:43 2015] PCI: pci_cache_line_size set to 64 bytes
[Cts Eki 31 16:18:43 2015] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[Cts Eki 31 16:18:43 2015] e820: reserve RAM buffer [mem 0x7ffa0000-0x7fffffff]
[Cts Eki 31 16:18:43 2015] NetLabel: Initializing
[Cts Eki 31 16:18:43 2015] NetLabel:  domain hash size = 128
[Cts Eki 31 16:18:43 2015] NetLabel:  protocols = UNLABELED CIPSOv4
[Cts Eki 31 16:18:43 2015] NetLabel:  unlabeled traffic allowed by default
[Cts Eki 31 16:18:43 2015] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[Cts Eki 31 16:18:43 2015] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[Cts Eki 31 16:18:43 2015] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[Cts Eki 31 16:18:43 2015] Switched to clocksource hpet
[Cts Eki 31 16:18:43 2015] AppArmor: AppArmor Filesystem Enabled
[Cts Eki 31 16:18:43 2015] pnp: PnP ACPI init
[Cts Eki 31 16:18:43 2015] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[Cts Eki 31 16:18:43 2015] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[Cts Eki 31 16:18:43 2015] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[Cts Eki 31 16:18:43 2015] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[Cts Eki 31 16:18:43 2015] pnp 00:03: Plug and Play ACPI device, IDs SYN0a06 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[Cts Eki 31 16:18:43 2015] system 00:04: [io  0x04d0-0x04d1] has been reserved
[Cts Eki 31 16:18:43 2015] system 00:04: [io  0x0800-0x087f] could not be reserved
[Cts Eki 31 16:18:43 2015] system 00:04: [io  0x0400-0x041f] has been reserved
[Cts Eki 31 16:18:43 2015] system 00:04: [io  0x0500-0x053f] has been reserved
[Cts Eki 31 16:18:43 2015] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[Cts Eki 31 16:18:43 2015] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[Cts Eki 31 16:18:43 2015] system 00:04: [mem 0xfed45000-0xfed89fff] has been reserved
[Cts Eki 31 16:18:43 2015] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
[Cts Eki 31 16:18:43 2015] system 00:04: [mem 0xfff00000-0xffffffff] has been reserved
[Cts Eki 31 16:18:43 2015] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[Cts Eki 31 16:18:43 2015] system 00:05: [io  0x0250-0x0253] has been reserved
[Cts Eki 31 16:18:43 2015] system 00:05: [io  0x0256-0x025f] has been reserved
[Cts Eki 31 16:18:43 2015] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[Cts Eki 31 16:18:43 2015] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[Cts Eki 31 16:18:43 2015] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[Cts Eki 31 16:18:43 2015] system 00:06: [mem 0xc0000000-0xcfffffff] has been reserved
[Cts Eki 31 16:18:43 2015] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[Cts Eki 31 16:18:43 2015] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[Cts Eki 31 16:18:43 2015] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[Cts Eki 31 16:18:43 2015] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[Cts Eki 31 16:18:43 2015] system 00:07: [mem 0x00100000-0x7fffffff] could not be reserved
[Cts Eki 31 16:18:43 2015] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[Cts Eki 31 16:18:43 2015] pnp: PnP ACPI: found 8 devices
[Cts Eki 31 16:18:43 2015] PnPBIOS: Disabled by ACPI PNP
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 08] add_size 1000
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000
[Cts Eki 31 16:18:43 2015] pci 0000:00:1f.0: BAR 13: [io  0x0800-0x087f] has bogus alignment
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.5: BAR 14: assigned [mem 0x80000000-0x801fffff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.5: BAR 13: assigned [io  0x1000-0x1fff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:01.0: PCI bridge to [bus 01]
[Cts Eki 31 16:18:43 2015] pci 0000:00:01.0:   bridge window [io  0x8000-0xafff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:01.0:   bridge window [mem 0xfde00000-0xfdefffff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:01.0:   bridge window [mem 0xdbd00000-0xfbcfffff 64bit pref]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.0: PCI bridge to [bus 02]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.1: PCI bridge to [bus 03]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.1:   bridge window [mem 0xfe000000-0xfe0fffff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.2: PCI bridge to [bus 04]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.2:   bridge window [io  0xb000-0xbfff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.2:   bridge window [mem 0xfe100000-0xfe1fffff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.3: PCI bridge to [bus 05]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.4:   bridge window [mem 0xfe200000-0xfe9fffff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.4:   bridge window [mem 0xfbd00000-0xfdcfffff 64bit pref]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.5: PCI bridge to [bus 08]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.5:   bridge window [io  0x1000-0x1fff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.5:   bridge window [mem 0x80000000-0x801fffff]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1c.5:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1e.0: PCI bridge to [bus 09]
[Cts Eki 31 16:18:43 2015] pci 0000:00:1e.0:   bridge window [mem 0xfea00000-0xfeafffff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:01: resource 0 [io  0x8000-0xafff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:01: resource 2 [mem 0xdbd00000-0xfbcfffff 64bit pref]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:03: resource 1 [mem 0xfe000000-0xfe0fffff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:04: resource 1 [mem 0xfe100000-0xfe1fffff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:06: resource 0 [io  0xc000-0xcfff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:06: resource 1 [mem 0xfe200000-0xfe9fffff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:06: resource 2 [mem 0xfbd00000-0xfdcfffff 64bit pref]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:08: resource 0 [io  0x1000-0x1fff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:08: resource 1 [mem 0x80000000-0x801fffff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:08: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:09: resource 1 [mem 0xfea00000-0xfeafffff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:09: resource 4 [io  0x0000-0x0cf7]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:09: resource 5 [io  0x0d00-0xffff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000dffff]
[Cts Eki 31 16:18:43 2015] pci_bus 0000:09: resource 8 [mem 0x80000000-0xffffffff]
[Cts Eki 31 16:18:43 2015] NET: Registered protocol family 2
[Cts Eki 31 16:18:43 2015] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Cts Eki 31 16:18:43 2015] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Cts Eki 31 16:18:43 2015] TCP: Hash tables configured (established 8192 bind 8192)
[Cts Eki 31 16:18:43 2015] TCP: reno registered
[Cts Eki 31 16:18:43 2015] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Cts Eki 31 16:18:43 2015] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Cts Eki 31 16:18:43 2015] NET: Registered protocol family 1
[Cts Eki 31 16:18:44 2015] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[Cts Eki 31 16:18:44 2015] pci 0000:01:00.0: Video device with shadowed ROM
[Cts Eki 31 16:18:44 2015] PCI: CLS 32 bytes, default 64
[Cts Eki 31 16:18:44 2015] Trying to unpack rootfs image as initramfs...
[Cts Eki 31 16:18:45 2015] Freeing initrd memory: 27544K (f4a24000 - f650a000)
[Cts Eki 31 16:18:45 2015] Simple Boot Flag at 0x52 set to 0x1
[Cts Eki 31 16:18:45 2015] microcode: CPU0 sig=0x6fb, pf=0x80, revision=0xb3
[Cts Eki 31 16:18:45 2015] microcode: CPU1 sig=0x6fb, pf=0x80, revision=0xb3
[Cts Eki 31 16:18:45 2015] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[Cts Eki 31 16:18:45 2015] Scanning for low memory corruption every 60 seconds
[Cts Eki 31 16:18:45 2015] futex hash table entries: 512 (order: 3, 32768 bytes)
[Cts Eki 31 16:18:45 2015] Initialise system trusted keyring
[Cts Eki 31 16:18:45 2015] audit: initializing netlink subsys (disabled)
[Cts Eki 31 16:18:45 2015] audit: type=2000 audit(1446297525.368:1): initialized
[Cts Eki 31 16:18:45 2015] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[Cts Eki 31 16:18:45 2015] zpool: loaded
[Cts Eki 31 16:18:45 2015] zbud: loaded
[Cts Eki 31 16:18:45 2015] VFS: Disk quotas dquot_6.5.2
[Cts Eki 31 16:18:45 2015] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Cts Eki 31 16:18:45 2015] fuse init (API version 7.23)
[Cts Eki 31 16:18:45 2015] Key type big_key registered
[Cts Eki 31 16:18:45 2015] Key type asymmetric registered
[Cts Eki 31 16:18:45 2015] Asymmetric key parser 'x509' registered
[Cts Eki 31 16:18:45 2015] bounce: pool size: 64 pages
[Cts Eki 31 16:18:45 2015] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[Cts Eki 31 16:18:45 2015] io scheduler noop registered
[Cts Eki 31 16:18:45 2015] io scheduler deadline registered (default)
[Cts Eki 31 16:18:45 2015] io scheduler cfq registered
[Cts Eki 31 16:18:45 2015] pcieport 0000:00:1c.5: enabling device (0104 -> 0107)
[Cts Eki 31 16:18:45 2015] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[Cts Eki 31 16:18:45 2015] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[Cts Eki 31 16:18:45 2015] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[Cts Eki 31 16:18:45 2015] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[Cts Eki 31 16:18:45 2015] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[Cts Eki 31 16:18:45 2015] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[Cts Eki 31 16:18:45 2015] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[Cts Eki 31 16:18:45 2015] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[Cts Eki 31 16:18:45 2015] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[Cts Eki 31 16:18:45 2015] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[Cts Eki 31 16:18:45 2015] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[Cts Eki 31 16:18:45 2015] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[Cts Eki 31 16:18:45 2015] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[Cts Eki 31 16:18:45 2015] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[Cts Eki 31 16:18:45 2015] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[Cts Eki 31 16:18:45 2015] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[Cts Eki 31 16:18:45 2015] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[Cts Eki 31 16:18:45 2015] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[Cts Eki 31 16:18:45 2015] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[Cts Eki 31 16:18:45 2015] pciehp 0000:00:01.0:pcie04: Slot #16 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep-
[Cts Eki 31 16:18:45 2015] pciehp 0000:00:01.0:pcie04: service driver pciehp loaded
[Cts Eki 31 16:18:45 2015] pciehp 0000:00:1c.4:pcie04: Slot #36 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
[Cts Eki 31 16:18:45 2015] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
[Cts Eki 31 16:18:45 2015] pciehp 0000:00:1c.5:pcie04: Slot #37 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
[Cts Eki 31 16:18:45 2015] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
[Cts Eki 31 16:18:45 2015] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[Cts Eki 31 16:18:45 2015] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[Cts Eki 31 16:18:45 2015] vesafb: scrolling: redraw
[Cts Eki 31 16:18:45 2015] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[Cts Eki 31 16:18:45 2015] vesafb: framebuffer at 0xe0000000, mapped to 0xf8480000, using 3072k, total 3072k
[Cts Eki 31 16:18:45 2015] Console: switching to colour frame buffer device 128x48
[Cts Eki 31 16:18:45 2015] fb0: VESA VGA frame buffer device
[Cts Eki 31 16:18:45 2015] intel_idle: does not run on family 6 model 15
[Cts Eki 31 16:18:45 2015] ACPI: AC Adapter [AC0] (on-line)
[Cts Eki 31 16:18:45 2015] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[Cts Eki 31 16:18:45 2015] ACPI: Sleep Button [SLPB]
[Cts Eki 31 16:18:45 2015] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[Cts Eki 31 16:18:45 2015] ACPI: Lid Switch [LID]
[Cts Eki 31 16:18:45 2015] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[Cts Eki 31 16:18:45 2015] ACPI: Power Button [PWRF]
[Cts Eki 31 16:18:45 2015] Monitor-Mwait will be used to enter C-1 state
[Cts Eki 31 16:18:45 2015] Monitor-Mwait will be used to enter C-2 state
[Cts Eki 31 16:18:45 2015] tsc: Marking TSC unstable due to TSC halts in idle
[Cts Eki 31 16:18:45 2015] ACPI: acpi_idle registered with cpuidle
[Cts Eki 31 16:18:45 2015] thermal LNXTHERM:00: registered as thermal_zone0
[Cts Eki 31 16:18:45 2015] ACPI: Thermal Zone [THRM] (60 C)
[Cts Eki 31 16:18:45 2015] GHES: HEST is not enabled!
[Cts Eki 31 16:18:45 2015] ACPI: Battery Slot [BAT0] (battery absent)
[Cts Eki 31 16:18:45 2015] isapnp: Scanning for PnP cards...
[Cts Eki 31 16:18:45 2015] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[Cts Eki 31 16:18:45 2015] Linux agpgart interface v0.103
[Cts Eki 31 16:18:45 2015] brd: module loaded
[Cts Eki 31 16:18:45 2015] loop: module loaded
[Cts Eki 31 16:18:45 2015] ata_piix 0000:00:1f.1: version 2.13
[Cts Eki 31 16:18:45 2015] scsi host0: ata_piix
[Cts Eki 31 16:18:45 2015] scsi host1: ata_piix
[Cts Eki 31 16:18:45 2015] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[Cts Eki 31 16:18:45 2015] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[Cts Eki 31 16:18:45 2015] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[Cts Eki 31 16:18:45 2015] ata2: port disabled--ignoring
[Cts Eki 31 16:18:45 2015] scsi host2: ata_piix
[Cts Eki 31 16:18:45 2015] scsi host3: ata_piix
[Cts Eki 31 16:18:45 2015] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 20
[Cts Eki 31 16:18:45 2015] ata4: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 20
[Cts Eki 31 16:18:45 2015] libphy: Fixed MDIO Bus: probed
[Cts Eki 31 16:18:45 2015] tun: Universal TUN/TAP device driver, 1.6
[Cts Eki 31 16:18:45 2015] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[Cts Eki 31 16:18:45 2015] PPP generic driver version 2.4.2
[Cts Eki 31 16:18:45 2015] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[Cts Eki 31 16:18:45 2015] ehci-pci: EHCI PCI platform driver
[Cts Eki 31 16:18:45 2015] ehci-pci 0000:00:1a.7: EHCI Host Controller
[Cts Eki 31 16:18:45 2015] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[Cts Eki 31 16:18:45 2015] ehci-pci 0000:00:1a.7: debug port 1
[Cts Eki 31 16:18:45 2015] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[Cts Eki 31 16:18:45 2015] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfebff400
[Cts Eki 31 16:18:45 2015] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
[Cts Eki 31 16:18:45 2015] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[Cts Eki 31 16:18:45 2015] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Cts Eki 31 16:18:45 2015] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Cts Eki 31 16:18:45 2015] usb usb1: Product: EHCI Host Controller
[Cts Eki 31 16:18:45 2015] usb usb1: Manufacturer: Linux 3.19.0-31-generic ehci_hcd
[Cts Eki 31 16:18:45 2015] usb usb1: SerialNumber: 0000:00:1a.7
[Cts Eki 31 16:18:45 2015] hub 1-0:1.0: USB hub found
[Cts Eki 31 16:18:45 2015] hub 1-0:1.0: 4 ports detected
[Cts Eki 31 16:18:45 2015] ehci-pci 0000:00:1d.7: EHCI Host Controller
[Cts Eki 31 16:18:45 2015] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[Cts Eki 31 16:18:45 2015] ehci-pci 0000:00:1d.7: debug port 1
[Cts Eki 31 16:18:45 2015] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[Cts Eki 31 16:18:45 2015] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfebff000
[Cts Eki 31 16:18:45 2015] ata1.00: configured for UDMA/33
[Cts Eki 31 16:18:45 2015] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[Cts Eki 31 16:18:45 2015] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[Cts Eki 31 16:18:45 2015] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Cts Eki 31 16:18:45 2015] usb usb2: Product: EHCI Host Controller
[Cts Eki 31 16:18:45 2015] usb usb2: Manufacturer: Linux 3.19.0-31-generic ehci_hcd
[Cts Eki 31 16:18:45 2015] usb usb2: SerialNumber: 0000:00:1d.7
[Cts Eki 31 16:18:45 2015] hub 2-0:1.0: USB hub found
[Cts Eki 31 16:18:45 2015] hub 2-0:1.0: 6 ports detected
[Cts Eki 31 16:18:45 2015] ehci-platform: EHCI generic platform driver
[Cts Eki 31 16:18:45 2015] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[Cts Eki 31 16:18:45 2015] ohci-pci: OHCI PCI platform driver
[Cts Eki 31 16:18:45 2015] ohci-platform: OHCI generic platform driver
[Cts Eki 31 16:18:45 2015] uhci_hcd: USB Universal Host Controller Interface driver
[Cts Eki 31 16:18:45 2015] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[Cts Eki 31 16:18:45 2015] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[Cts Eki 31 16:18:45 2015] uhci_hcd 0000:00:1a.0: detected 2 ports
[Cts Eki 31 16:18:45 2015] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
[Cts Eki 31 16:18:45 2015] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[Cts Eki 31 16:18:45 2015] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Cts Eki 31 16:18:45 2015] usb usb3: Product: UHCI Host Controller
[Cts Eki 31 16:18:45 2015] usb usb3: Manufacturer: Linux 3.19.0-31-generic uhci_hcd
[Cts Eki 31 16:18:45 2015] usb usb3: SerialNumber: 0000:00:1a.0
[Cts Eki 31 16:18:45 2015] hub 3-0:1.0: USB hub found
[Cts Eki 31 16:18:45 2015] hub 3-0:1.0: 2 ports detected
[Cts Eki 31 16:18:45 2015] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[Cts Eki 31 16:18:45 2015] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[Cts Eki 31 16:18:45 2015] uhci_hcd 0000:00:1a.1: detected 2 ports
[Cts Eki 31 16:18:45 2015] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000dc00
[Cts Eki 31 16:18:45 2015] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[Cts Eki 31 16:18:45 2015] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Cts Eki 31 16:18:45 2015] usb usb4: Product: UHCI Host Controller
[Cts Eki 31 16:18:45 2015] usb usb4: Manufacturer: Linux 3.19.0-31-generic uhci_hcd
[Cts Eki 31 16:18:45 2015] usb usb4: SerialNumber: 0000:00:1a.1
[Cts Eki 31 16:18:45 2015] hub 4-0:1.0: USB hub found
[Cts Eki 31 16:18:45 2015] hub 4-0:1.0: 2 ports detected
[Cts Eki 31 16:18:45 2015] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[Cts Eki 31 16:18:45 2015] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[Cts Eki 31 16:18:45 2015] uhci_hcd 0000:00:1d.0: detected 2 ports
[Cts Eki 31 16:18:45 2015] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880
[Cts Eki 31 16:18:45 2015] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[Cts Eki 31 16:18:45 2015] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Cts Eki 31 16:18:45 2015] usb usb5: Product: UHCI Host Controller
[Cts Eki 31 16:18:45 2015] usb usb5: Manufacturer: Linux 3.19.0-31-generic uhci_hcd
[Cts Eki 31 16:18:45 2015] usb usb5: SerialNumber: 0000:00:1d.0
[Cts Eki 31 16:18:45 2015] hub 5-0:1.0: USB hub found
[Cts Eki 31 16:18:45 2015] hub 5-0:1.0: 2 ports detected
[Cts Eki 31 16:18:45 2015] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[Cts Eki 31 16:18:45 2015] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[Cts Eki 31 16:18:45 2015] uhci_hcd 0000:00:1d.1: detected 2 ports
[Cts Eki 31 16:18:45 2015] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
[Cts Eki 31 16:18:45 2015] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[Cts Eki 31 16:18:45 2015] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Cts Eki 31 16:18:45 2015] usb usb6: Product: UHCI Host Controller
[Cts Eki 31 16:18:45 2015] usb usb6: Manufacturer: Linux 3.19.0-31-generic uhci_hcd
[Cts Eki 31 16:18:45 2015] usb usb6: SerialNumber: 0000:00:1d.1
[Cts Eki 31 16:18:45 2015] hub 6-0:1.0: USB hub found
[Cts Eki 31 16:18:45 2015] hub 6-0:1.0: 2 ports detected
[Cts Eki 31 16:18:45 2015] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[Cts Eki 31 16:18:45 2015] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[Cts Eki 31 16:18:45 2015] uhci_hcd 0000:00:1d.2: detected 2 ports
[Cts Eki 31 16:18:45 2015] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480
[Cts Eki 31 16:18:45 2015] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[Cts Eki 31 16:18:45 2015] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Cts Eki 31 16:18:45 2015] usb usb7: Product: UHCI Host Controller
[Cts Eki 31 16:18:45 2015] usb usb7: Manufacturer: Linux 3.19.0-31-generic uhci_hcd
[Cts Eki 31 16:18:45 2015] usb usb7: SerialNumber: 0000:00:1d.2
[Cts Eki 31 16:18:45 2015] hub 7-0:1.0: USB hub found
[Cts Eki 31 16:18:45 2015] hub 7-0:1.0: 2 ports detected
[Cts Eki 31 16:18:45 2015] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[Cts Eki 31 16:18:45 2015] i8042: Detected active multiplexing controller, rev 1.1
[Cts Eki 31 16:18:45 2015] serio: i8042 KBD port at 0x60,0x64 irq 1
[Cts Eki 31 16:18:45 2015] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[Cts Eki 31 16:18:45 2015] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[Cts Eki 31 16:18:45 2015] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[Cts Eki 31 16:18:45 2015] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[Cts Eki 31 16:18:45 2015] mousedev: PS/2 mouse device common for all mice
[Cts Eki 31 16:18:45 2015] rtc_cmos 00:01: RTC can wake from S4
[Cts Eki 31 16:18:45 2015] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[Cts Eki 31 16:18:45 2015] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[Cts Eki 31 16:18:45 2015] i2c /dev entries driver
[Cts Eki 31 16:18:45 2015] device-mapper: uevent: version 1.0.3
[Cts Eki 31 16:18:45 2015] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[Cts Eki 31 16:18:45 2015] platform eisa.0: Probing EISA bus 0
[Cts Eki 31 16:18:45 2015] platform eisa.0: EISA: Cannot allocate resource for mainboard
[Cts Eki 31 16:18:45 2015] platform eisa.0: Cannot allocate resource for EISA slot 1
[Cts Eki 31 16:18:45 2015] platform eisa.0: Cannot allocate resource for EISA slot 2
[Cts Eki 31 16:18:45 2015] platform eisa.0: Cannot allocate resource for EISA slot 3
[Cts Eki 31 16:18:45 2015] platform eisa.0: Cannot allocate resource for EISA slot 4
[Cts Eki 31 16:18:45 2015] platform eisa.0: Cannot allocate resource for EISA slot 5
[Cts Eki 31 16:18:45 2015] platform eisa.0: Cannot allocate resource for EISA slot 6
[Cts Eki 31 16:18:45 2015] platform eisa.0: Cannot allocate resource for EISA slot 7
[Cts Eki 31 16:18:45 2015] platform eisa.0: Cannot allocate resource for EISA slot 8
[Cts Eki 31 16:18:45 2015] platform eisa.0: EISA: Detected 0 cards
[Cts Eki 31 16:18:45 2015] cpufreq-nforce2: No nForce2 chipset.
[Cts Eki 31 16:18:45 2015] ledtrig-cpu: registered to indicate activity on CPUs
[Cts Eki 31 16:18:45 2015] PCCT header not found.
[Cts Eki 31 16:18:45 2015] ACPI PCC probe failed.
[Cts Eki 31 16:18:45 2015] TCP: cubic registered
[Cts Eki 31 16:18:45 2015] NET: Registered protocol family 10
[Cts Eki 31 16:18:45 2015] NET: Registered protocol family 17
[Cts Eki 31 16:18:45 2015] Key type dns_resolver registered
[Cts Eki 31 16:18:45 2015] Using IPI No-Shortcut mode
[Cts Eki 31 16:18:45 2015] Loading compiled-in X.509 certificates
[Cts Eki 31 16:18:45 2015] Loaded X.509 cert 'Magrathea: Glacier signing key: bec35300c51eb0cd32419dfaab42235929c53bb6'
[Cts Eki 31 16:18:45 2015] registered taskstats version 1
[Cts Eki 31 16:18:45 2015] Key type trusted registered
[Cts Eki 31 16:18:45 2015] Key type encrypted registered
[Cts Eki 31 16:18:45 2015] AppArmor: AppArmor sha1 policy hashing enabled
[Cts Eki 31 16:18:45 2015] ima: No TPM chip found, activating TPM-bypass!
[Cts Eki 31 16:18:45 2015] evm: HMAC attrs: 0x1
[Cts Eki 31 16:18:45 2015]   Magic number: 3:6:333
[Cts Eki 31 16:18:45 2015] tty tty54: hash matches
[Cts Eki 31 16:18:45 2015] rtc_cmos 00:01: setting system clock to 2015-10-31 13:18:46 UTC (1446297526)
[Cts Eki 31 16:18:45 2015] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[Cts Eki 31 16:18:45 2015] EDD information not available.
[Cts Eki 31 16:18:45 2015] PM: Hibernation image not present or could not be loaded.
[Cts Eki 31 16:18:45 2015] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[Cts Eki 31 16:18:45 2015] isapnp: No Plug & Play device found
[Cts Eki 31 16:18:45 2015] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20L  NR02 PQ: 0 ANSI: 5
[Cts Eki 31 16:18:45 2015] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[Cts Eki 31 16:18:45 2015] cdrom: Uniform CD-ROM driver Revision: 3.20
[Cts Eki 31 16:18:45 2015] sr 0:0:0:0: Attached scsi CD-ROM sr0
[Cts Eki 31 16:18:45 2015] sr 0:0:0:0: Attached scsi generic sg0 type 5
[Cts Eki 31 16:18:45 2015] usb 1-2: new high-speed USB device number 2 using ehci-pci
[Cts Eki 31 16:18:46 2015] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[Cts Eki 31 16:18:46 2015] usb 5-2: New USB device found, idVendor=046d, idProduct=c52f
[Cts Eki 31 16:18:46 2015] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[Cts Eki 31 16:18:46 2015] usb 5-2: Product: USB Receiver
[Cts Eki 31 16:18:46 2015] usb 5-2: Manufacturer: Logitech
[Cts Eki 31 16:18:46 2015] usb 1-2: New USB device found, idVendor=174f, idProduct=6a33
[Cts Eki 31 16:18:46 2015] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=10
[Cts Eki 31 16:18:46 2015] usb 1-2: Product: USB2.0
[Cts Eki 31 16:18:46 2015] usb 1-2: Manufacturer: Syntek
[Cts Eki 31 16:18:46 2015] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[Cts Eki 31 16:18:46 2015] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[Cts Eki 31 16:18:46 2015] ata3.01: SATA link down (SStatus 0 SControl 300)
[Cts Eki 31 16:18:46 2015] ata3.00: ATA-8: TOSHIBA MQ01ABD050, AX001A, max UDMA/100
[Cts Eki 31 16:18:46 2015] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[Cts Eki 31 16:18:46 2015] ata3.00: configured for UDMA/100
[Cts Eki 31 16:18:46 2015] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABD0 1A   PQ: 0 ANSI: 5
[Cts Eki 31 16:18:46 2015] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[Cts Eki 31 16:18:46 2015] sd 2:0:0:0: [sda] 4096-byte physical blocks
[Cts Eki 31 16:18:46 2015] sd 2:0:0:0: Attached scsi generic sg1 type 0
[Cts Eki 31 16:18:46 2015] sd 2:0:0:0: [sda] Write Protect is off
[Cts Eki 31 16:18:46 2015] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Cts Eki 31 16:18:46 2015] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Cts Eki 31 16:18:46 2015]  sda: sda1 sda2 < sda5 >
[Cts Eki 31 16:18:46 2015] sd 2:0:0:0: [sda] Attached SCSI disk
[Cts Eki 31 16:18:46 2015] usb 7-1: New USB device found, idVendor=0b05, idProduct=1712
[Cts Eki 31 16:18:46 2015] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[Cts Eki 31 16:18:46 2015] usb 7-1: SerialNumber: 0194E8-5B-0002
[Cts Eki 31 16:18:46 2015] usb 7-2: new full-speed USB device number 3 using uhci_hcd
[Cts Eki 31 16:18:46 2015] ata4.01: failed to resume link (SControl 0)
[Cts Eki 31 16:18:46 2015] ata4.00: SATA link down (SStatus 0 SControl 300)
[Cts Eki 31 16:18:46 2015] ata4.01: SATA link down (SStatus 0 SControl 0)
[Cts Eki 31 16:18:46 2015] Freeing unused kernel memory: 932K (c1a64000 - c1b4d000)
[Cts Eki 31 16:18:46 2015] Write protecting the kernel text: 6952k
[Cts Eki 31 16:18:46 2015] Write protecting the kernel read-only data: 3012k
[Cts Eki 31 16:18:46 2015] NX-protecting the kernel data: 5336k
[Cts Eki 31 16:18:46 2015] systemd-udevd[116]: starting version 204
[Cts Eki 31 16:18:46 2015] atl1 0000:02:00.0: version 2.1.3
[Cts Eki 31 16:18:46 2015] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[Cts Eki 31 16:18:46 2015] [drm] Initialized drm 1.1.0 20060810
[Cts Eki 31 16:18:46 2015] acpi device:1e: registered as cooling_device2
[Cts Eki 31 16:18:46 2015] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1a/LNXVIDEO:00/input/input8
[Cts Eki 31 16:18:46 2015] ahci 0000:04:00.0: version 3.0
[Cts Eki 31 16:18:47 2015] hidraw: raw HID events driver (C) Jiri Kosina
[Cts Eki 31 16:18:47 2015] sdhci: Secure Digital Host Controller Interface driver
[Cts Eki 31 16:18:47 2015] sdhci: Copyright(c) Pierre Ossman
[Cts Eki 31 16:18:47 2015] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[Cts Eki 31 16:18:47 2015] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[Cts Eki 31 16:18:47 2015] usb 7-2: New USB device found, idVendor=08ff, idProduct=1600
[Cts Eki 31 16:18:47 2015] usb 7-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Cts Eki 31 16:18:47 2015] usb 7-2: Product: Fingerprint Sensor
[Cts Eki 31 16:18:47 2015] sdhci-pci 0000:09:01.1: SDHCI controller found [1180:0822] (rev 22)
[Cts Eki 31 16:18:47 2015] sdhci-pci 0000:09:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[Cts Eki 31 16:18:47 2015] sdhci-pci 0000:09:01.1: No vmmc regulator found
[Cts Eki 31 16:18:47 2015] sdhci-pci 0000:09:01.1: No vqmmc regulator found
[Cts Eki 31 16:18:47 2015] sdhci-pci 0000:09:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[Cts Eki 31 16:18:47 2015] usbcore: registered new interface driver usbhid
[Cts Eki 31 16:18:47 2015] usbhid: USB HID core driver
[Cts Eki 31 16:18:47 2015] scsi host4: ahci
[Cts Eki 31 16:18:47 2015] ata5: SATA max UDMA/133 abar m8192@0xfe1fe000 port 0xfe1fe100 irq 18
[Cts Eki 31 16:18:47 2015] [drm] radeon kernel modesetting enabled.
[Cts Eki 31 16:18:47 2015] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[Cts Eki 31 16:18:47 2015] fb: switching to radeondrmfb from VESA VGA
[Cts Eki 31 16:18:47 2015] Console: switching to colour dummy device 80x25
[Cts Eki 31 16:18:47 2015] [drm] initializing kernel modesetting (RV630 0x1002:0x9581 0x1043:0x1562).
[Cts Eki 31 16:18:47 2015] [drm] register mmio base: 0xFDEF0000
[Cts Eki 31 16:18:47 2015] [drm] register mmio size: 65536
[Cts Eki 31 16:18:47 2015] ATOM BIOS: ASUS_F3Sa
[Cts Eki 31 16:18:47 2015] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[Cts Eki 31 16:18:47 2015] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[Cts Eki 31 16:18:47 2015] [drm] Detected VRAM RAM=512M, BAR=256M
[Cts Eki 31 16:18:47 2015] [drm] RAM width 128bits DDR
[Cts Eki 31 16:18:47 2015] [TTM] Zone  kernel: Available graphics memory: 439928 kiB
[Cts Eki 31 16:18:47 2015] [TTM] Zone highmem: Available graphics memory: 1031612 kiB
[Cts Eki 31 16:18:47 2015] [TTM] Initializing pool allocator
[Cts Eki 31 16:18:47 2015] [TTM] Initializing DMA pool allocator
[Cts Eki 31 16:18:47 2015] [drm] radeon: 512M of VRAM memory ready
[Cts Eki 31 16:18:47 2015] [drm] radeon: 512M of GTT memory ready.
[Cts Eki 31 16:18:47 2015] [drm] Loading RV630 Microcode
[Cts Eki 31 16:18:47 2015] [drm] Internal thermal controller without fan control
[Cts Eki 31 16:18:47 2015] [drm] radeon: power management initialized
[Cts Eki 31 16:18:47 2015] [drm] GART: num cpu pages 131072, num gpu pages 131072
[Cts Eki 31 16:18:47 2015] sdhci-pci 0000:09:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[Cts Eki 31 16:18:47 2015] mmc0: SDHCI controller on PCI [0000:09:01.1] using DMA
[Cts Eki 31 16:18:47 2015] [drm] PCIE GART of 512M enabled (table at 0x0000000000254000).
[Cts Eki 31 16:18:47 2015] radeon 0000:01:00.0: WB enabled
[Cts Eki 31 16:18:47 2015] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffc0cc00
[Cts Eki 31 16:18:47 2015] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x00000000000521d0 and cpu addr 0xf84921d0
[Cts Eki 31 16:18:47 2015] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[Cts Eki 31 16:18:47 2015] [drm] Driver supports precise vblank timestamp query.
[Cts Eki 31 16:18:47 2015] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[Cts Eki 31 16:18:47 2015] radeon 0000:01:00.0: radeon: using MSI.
[Cts Eki 31 16:18:47 2015] [drm] radeon: irq initialized.
[Cts Eki 31 16:18:47 2015] [drm] ring test on 0 succeeded in 1 usecs
[Cts Eki 31 16:18:47 2015] firewire_ohci 0000:09:01.0: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[Cts Eki 31 16:18:47 2015] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/0003:046D:C52F.0001/input/input9
[Cts Eki 31 16:18:47 2015] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
[Cts Eki 31 16:18:47 2015] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/0003:046D:C52F.0002/input/input10
[Cts Eki 31 16:18:47 2015] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
[Cts Eki 31 16:18:47 2015] [drm] ring test on 5 succeeded in 0 usecs
[Cts Eki 31 16:18:47 2015] [drm] UVD initialized successfully.
[Cts Eki 31 16:18:47 2015] [drm] ib test on ring 0 succeeded in 0 usecs
[Cts Eki 31 16:18:47 2015] ata5: SATA link down (SStatus 0 SControl 300)
[Cts Eki 31 16:18:47 2015] firewire_core 0000:09:01.0: created device fw0: GUID 001e8c000007569a, S400
[Cts Eki 31 16:18:47 2015] [drm] ib test on ring 5 succeeded
[Cts Eki 31 16:18:47 2015] [drm] Radeon Display Connectors
[Cts Eki 31 16:18:47 2015] [drm] Connector 0:
[Cts Eki 31 16:18:47 2015] [drm]   VGA-1
[Cts Eki 31 16:18:47 2015] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[Cts Eki 31 16:18:47 2015] [drm]   Encoders:
[Cts Eki 31 16:18:47 2015] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[Cts Eki 31 16:18:47 2015] [drm] Connector 1:
[Cts Eki 31 16:18:47 2015] [drm]   HDMI-A-1
[Cts Eki 31 16:18:47 2015] [drm]   HPD1
[Cts Eki 31 16:18:47 2015] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[Cts Eki 31 16:18:47 2015] [drm]   Encoders:
[Cts Eki 31 16:18:47 2015] [drm]     DFP1: INTERNAL_KLDSCP_TMDS1
[Cts Eki 31 16:18:47 2015] [drm] Connector 2:
[Cts Eki 31 16:18:47 2015] [drm]   LVDS-1
[Cts Eki 31 16:18:47 2015] [drm]   DDC: 0xac0 0xac0 0xac4 0xac4 0xac8 0xac8 0xacc 0xacc
[Cts Eki 31 16:18:47 2015] [drm]   Encoders:
[Cts Eki 31 16:18:47 2015] [drm]     LCD1: INTERNAL_LVTM1
[Cts Eki 31 16:18:47 2015] [drm] Connector 3:
[Cts Eki 31 16:18:47 2015] [drm]   DIN-1
[Cts Eki 31 16:18:47 2015] [drm]   Encoders:
[Cts Eki 31 16:18:47 2015] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[Cts Eki 31 16:18:48 2015] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008/0x0, board id: 0, fw id: 30712
[Cts Eki 31 16:18:48 2015] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input14
[Cts Eki 31 16:18:48 2015] [drm] fb mappable at 0xE0355000
[Cts Eki 31 16:18:48 2015] [drm] vram apper at 0xE0000000
[Cts Eki 31 16:18:48 2015] [drm] size 4096000
[Cts Eki 31 16:18:48 2015] [drm] fb depth is 24
[Cts Eki 31 16:18:48 2015] [drm]    pitch is 5120
[Cts Eki 31 16:18:48 2015] fbcon: radeondrmfb (fb0) is primary device
[Cts Eki 31 16:18:48 2015] Console: switching to colour frame buffer device 160x50
[Cts Eki 31 16:18:48 2015] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[Cts Eki 31 16:18:48 2015] radeon 0000:01:00.0: registered panic notifier
[Cts Eki 31 16:18:48 2015] [drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 0
[Cts Eki 31 16:18:48 2015] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[Cts Eki 31 16:18:49 2015] random: init urandom read with 128 bits of entropy available
[Cts Eki 31 16:18:49 2015] random: nonblocking pool is initialized
[Cts Eki 31 16:18:57 2015] Adding 48826364k swap on /dev/sda5.  Priority:-1 extents:1 across:48826364k FS
[Cts Eki 31 16:18:57 2015] systemd-udevd[312]: starting version 204
[Cts Eki 31 16:18:57 2015] lp: driver loaded but no devices found
[Cts Eki 31 16:18:57 2015] ppdev: user-space parallel port driver
[Cts Eki 31 16:18:57 2015] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[Cts Eki 31 16:18:57 2015] asus_laptop: Asus Laptop Support version 0.42
[Cts Eki 31 16:18:57 2015] asus_laptop:   F3Sa model detected
[Cts Eki 31 16:18:57 2015] asus_laptop: Backlight controlled by ACPI video driver
[Cts Eki 31 16:18:57 2015] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input15
[Cts Eki 31 16:18:57 2015] Bluetooth: Core ver 2.20
[Cts Eki 31 16:18:57 2015] NET: Registered protocol family 31
[Cts Eki 31 16:18:57 2015] Bluetooth: HCI device and connection manager initialized
[Cts Eki 31 16:18:57 2015] Bluetooth: HCI socket layer initialized
[Cts Eki 31 16:18:57 2015] Bluetooth: L2CAP socket layer initialized
[Cts Eki 31 16:18:57 2015] Bluetooth: SCO socket layer initialized
[Cts Eki 31 16:18:57 2015] ACPI Warning: SystemIO range 0x00000828-0x0000082f conflicts with OpRegion 0x00000800-0x0000084f (\PMIO) (20141107/utaddress-258)
[Cts Eki 31 16:18:57 2015] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[Cts Eki 31 16:18:57 2015] ACPI Warning: SystemIO range 0x00000530-0x0000053f conflicts with OpRegion 0x00000500-0x0000053f (\GPIO) (20141107/utaddress-258)
[Cts Eki 31 16:18:57 2015] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[Cts Eki 31 16:18:57 2015] ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts with OpRegion 0x00000500-0x0000053f (\GPIO) (20141107/utaddress-258)
[Cts Eki 31 16:18:57 2015] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[Cts Eki 31 16:18:57 2015] lpc_ich: Resource conflict(s) found affecting gpio_ich
[Cts Eki 31 16:18:57 2015] cfg80211: Calling CRDA to update world regulatory domain
[Cts Eki 31 16:18:57 2015] r592: driver successfully loaded
[Cts Eki 31 16:18:57 2015] usbcore: registered new interface driver btusb
[Cts Eki 31 16:18:57 2015] r852: driver loaded successfully
[Cts Eki 31 16:18:57 2015] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[Cts Eki 31 16:18:57 2015] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[Cts Eki 31 16:18:57 2015] iwl4965 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[Cts Eki 31 16:18:57 2015] iwl4965 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[Cts Eki 31 16:18:57 2015] iwl4965 0000:03:00.0: device EEPROM VER=0x36, CALIB=0x5
[Cts Eki 31 16:18:57 2015] iwl4965 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[Cts Eki 31 16:18:58 2015] audit: type=1400 audit(1446297538.913:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=390 comm="apparmor_parser"
[Cts Eki 31 16:18:58 2015] audit: type=1400 audit(1446297538.913:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=390 comm="apparmor_parser"
[Cts Eki 31 16:18:58 2015] audit: type=1400 audit(1446297538.913:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=390 comm="apparmor_parser"
[Cts Eki 31 16:18:58 2015] audit: type=1400 audit(1446297538.913:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=390 comm="apparmor_parser"
[Cts Eki 31 16:18:58 2015] audit: type=1400 audit(1446297538.913:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=390 comm="apparmor_parser"
[Cts Eki 31 16:18:58 2015] audit: type=1400 audit(1446297538.913:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=390 comm="apparmor_parser"
[Cts Eki 31 16:18:58 2015] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[Cts Eki 31 16:18:58 2015] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[Cts Eki 31 16:18:58 2015] sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[Cts Eki 31 16:18:58 2015] sound hdaudioC0D0:    mono: mono_out=0x0
[Cts Eki 31 16:18:58 2015] sound hdaudioC0D0:    dig-out=0x1e/0x0
[Cts Eki 31 16:18:58 2015] sound hdaudioC0D0:    inputs:
[Cts Eki 31 16:18:58 2015] sound hdaudioC0D0:      Internal Mic=0x19
[Cts Eki 31 16:18:58 2015] sound hdaudioC0D0:      Mic=0x18
[Cts Eki 31 16:18:58 2015] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[Cts Eki 31 16:18:58 2015] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[Cts Eki 31 16:18:58 2015] iwl4965 0000:03:00.0: loaded firmware version 228.61.2.24
[Cts Eki 31 16:18:58 2015] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
[Cts Eki 31 16:18:58 2015] cfg80211: World regulatory domain updated:
[Cts Eki 31 16:18:58 2015] cfg80211:  DFS Master region: unset
[Cts Eki 31 16:18:58 2015] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[Cts Eki 31 16:18:58 2015] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[Cts Eki 31 16:18:58 2015] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[Cts Eki 31 16:18:58 2015] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[Cts Eki 31 16:18:58 2015] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[Cts Eki 31 16:18:58 2015] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[Cts Eki 31 16:18:59 2015] wl: module license 'MIXED/Proprietary' taints kernel.
[Cts Eki 31 16:18:59 2015] Disabling lock debugging due to kernel taint
[Cts Eki 31 16:18:59 2015] wl: module verification failed: signature and/or  required key missing - tainting kernel
[Cts Eki 31 16:18:59 2015] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[Cts Eki 31 16:19:00 2015] init: failsafe main process (626) killed by TERM signal
[Cts Eki 31 16:19:00 2015] audit: type=1400 audit(1446297541.361:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=687 comm="apparmor_parser"
[Cts Eki 31 16:19:00 2015] audit: type=1400 audit(1446297541.361:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=687 comm="apparmor_parser"
[Cts Eki 31 16:19:00 2015] audit: type=1400 audit(1446297541.365:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=687 comm="apparmor_parser"
[Cts Eki 31 16:19:00 2015] audit: type=1400 audit(1446297541.617:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=751 comm="apparmor_parser"
[Cts Eki 31 16:19:00 2015] Bluetooth: RFCOMM TTY layer initialized
[Cts Eki 31 16:19:00 2015] Bluetooth: RFCOMM socket layer initialized
[Cts Eki 31 16:19:00 2015] Bluetooth: RFCOMM ver 1.11
[Cts Eki 31 16:19:01 2015] init: cups main process (691) killed by HUP signal
[Cts Eki 31 16:19:01 2015] init: cups main process ended, respawning
[Cts Eki 31 16:19:01 2015] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Cts Eki 31 16:19:01 2015] Bluetooth: BNEP filters: protocol multicast
[Cts Eki 31 16:19:01 2015] Bluetooth: BNEP socket layer initialized
[Cts Eki 31 16:19:02 2015] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[Cts Eki 31 16:19:02 2015] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[Cts Eki 31 16:19:06 2015] init: plymouth-upstart-bridge main process ended, respawning
[Cts Eki 31 16:19:06 2015] init: plymouth-upstart-bridge main process ended, respawning
[Cts Eki 31 16:19:07 2015] wlan0: authenticate with 64:66:b3:99:5a:dd
[Cts Eki 31 16:19:07 2015] wlan0: send auth to 64:66:b3:99:5a:dd (try 1/3)
[Cts Eki 31 16:19:07 2015] wlan0: authenticated
[Cts Eki 31 16:19:07 2015] iwl4965 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[Cts Eki 31 16:19:07 2015] wlan0: associate with 64:66:b3:99:5a:dd (try 1/3)
[Cts Eki 31 16:19:07 2015] wlan0: RX AssocResp from 64:66:b3:99:5a:dd (capab=0x411 status=0 aid=7)
[Cts Eki 31 16:19:07 2015] wlan0: associated
[Cts Eki 31 16:19:07 2015] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[Cts Eki 31 16:19:07 2015] wlan0: deauthenticating from 64:66:b3:99:5a:dd by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[Cts Eki 31 16:19:07 2015] wlan0: authenticate with 64:66:b3:99:5a:dd
[Cts Eki 31 16:19:07 2015] wlan0: send auth to 64:66:b3:99:5a:dd (try 1/3)
[Cts Eki 31 16:19:07 2015] cfg80211: Calling CRDA to update world regulatory domain
[Cts Eki 31 16:19:07 2015] wlan0: authenticated
[Cts Eki 31 16:19:07 2015] iwl4965 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[Cts Eki 31 16:19:07 2015] wlan0: associate with 64:66:b3:99:5a:dd (try 1/3)
[Cts Eki 31 16:19:07 2015] wlan0: RX AssocResp from 64:66:b3:99:5a:dd (capab=0x411 status=0 aid=7)
[Cts Eki 31 16:19:07 2015] cfg80211: World regulatory domain updated:
[Cts Eki 31 16:19:07 2015] cfg80211:  DFS Master region: unset
[Cts Eki 31 16:19:07 2015] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[Cts Eki 31 16:19:07 2015] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[Cts Eki 31 16:19:07 2015] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[Cts Eki 31 16:19:07 2015] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[Cts Eki 31 16:19:07 2015] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[Cts Eki 31 16:19:07 2015] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[Cts Eki 31 16:19:07 2015] wlan0: associated
[Cts Eki 31 16:19:27 2015] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[Cts Eki 31 16:19:27 2015] Bluetooth: HIDP socket layer initialized
[Cts Eki 31 16:19:30 2015] audit_printk_skb: 105 callbacks suppressed
[Cts Eki 31 16:19:30 2015] audit: type=1400 audit(1446297571.444:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1905 comm="apparmor_parser"
[Cts Eki 31 16:19:30 2015] audit: type=1400 audit(1446297571.444:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1905 comm="apparmor_parser"
[Cts Eki 31 16:19:30 2015] audit: type=1400 audit(1446297571.444:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1905 comm="apparmor_parser"

neynefes

@blaxsES, kod etiketi kullanınız.
http://kb.ubuntu-tr.net/kodetiketi

Bu seferlik ben düzenledim. Dikkat ediniz ve başlıklara Yardım edin, Kesin çözüm gibi etiketler koymayınız.

blaxsES

yorum yazan herkese teşekkür ederim
lütfen konuya odaklanalım konudan sapmayalım

neynefes

@blaxsES, bu forumun belli bir düzeni var sizden tekrar rica ediyorum. Sürekli başlıkları gereksiz etiketlerle düzenlemeyin.

ata1

@neynefes  sizde şu komutun karşılığı var mı sistemin açılış süresini görebilmemiz için .
systemd-analyze
Startup finished in 1.678s (kernel) + 1.252s (userspace) = 2.931s

hmmm benimkide 1 sn gecikmiş bugün

neynefes

Evet @eral varmış.

Startup finished in 4.894s (kernel) + 18.514s (userspace) = 23.408s

ata1

systemd-analyze blame
buda varsa nerede oyalandığını görebilirsiniz

neynefes

Bu da çalıştı. Not aldım teşekkür ederim :)

ata1

o zaman başlık açan arkadaştan isteyelim çıktıları
systemd-analyze
systemd-analyze blame

betseg

elementary systemd değil Upstart kullanıyor, bu komut işe yaramaz :)

ata1

#13
evet bende öğrenmiş oldum 15.10 ile systemd' geçilmiş sanırım teşekkürler uyarına .
keşke kali'yi kaldır masaymışım en azından komutları öğreniyordum .  ;D
EDİT . peki bu komutların muadil nedir eski sürümlerde


ata1

anladığım kadarıyla geçiş yapılabiliyor systemd'e yanılıyorsam düzelt lütfen

betseg

14.10 ve önceki sürümlerde hiç yok, 15.04'te değişiklik yapılabiliyor, sonraki sürümlerde de (bildiğim kadarıyla) Upstart yok.

blaxsES

Alıntı yapılan: eral - 31 Ekim 2015 - 17:40:34
@neynefes  sizde şu komutun karşılığı var mı sistemin açılış süresini görebilmemiz için .
systemd-analyze
Startup finished in 1.678s (kernel) + 1.252s (userspace) = 2.931s

hmmm benimkide 1 sn gecikmiş bugün

systemd-analyze
yazdım sonuç
[code]systemd-analyze: komut bulunamadı
[code]sudo systemd-analyze
yazdım şifre istedi girdim sonuç
[code]sudo: systemd-analyze: command not found
ondan sonra
[code]systemd-analyze blame
yazdım sonuç
[code]systemd-analyze: komut bulunamadı
ondan sonra bu komutun sudo ekleyerek yazım sonuç değişmedi yine aynı

ata1

Alıntı yapılan: betseg - 31 Ekim 2015 - 18:55:33
14.10 ve önceki sürümlerde hiç yok, 15.04'te değişiklik yapılabiliyor, sonraki sürümlerde de (bildiğim kadarıyla) Upstart yok.
arkadaşım açıklamış 15.10 ile geçiş yapılmış diye

heartsmagic

Son bölümde 20 saniye kadar Bluetooth için beklemiş sistem, dahili mi yoksa harici mi kendisi?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.