Bilgisayar gereğinden fazla yavaş açılıyor?

Başlatan Gh0st, 30 Ekim 2015 - 20:31:51

« önceki - sonraki »

0 Üyeler ve 10 Ziyaretçi konuyu incelemekte.

Yazdır
Aşağı git Sayfa1
Kullanıcı Eylemleri

Gh0st

30 Ekim 2015 - 20:31:51
Merhaba uzun zamandır bu forumu takip ediyordum 2 hafta olması lazım sanırım önce yeni topladığım bilgisayarda ubuntu 14.04 LTS kurdum harddiske kurulu tek işletim sistemi olarak fakat bilgisayarın açılış ve kapanışında anormal bir yavaşlık var donanımları iyi derecede 8 gm ram işlemci amd fx x8 anakart gigabyte 970A-DS3P konuyu doğru yere açtım mı bilmiyorum eğer yanlış yere açtıysam kusura bakmayın, yardımcı olursanız çok sevinirim  :)
Bütün pusulaları atın çöpe. İnsan bir zaman kaybıdır yeryüzünde.

MuhbirKedi

#1
30 Ekim 2015 - 20:48:19
Alıntı yapılan: Gh0st - 30 Ekim 2015 - 20:31:51
Merhaba uzun zamandır bu forumu takip ediyordum 2 hafta olması lazım sanırım önce yeni topladığım bilgisayarda ubuntu 14.04 LTS kurdum harddiske kurulu tek işletim sistemi olarak fakat bilgisayarın açılış ve kapanışında anormal bir yavaşlık var donanımları iyi derecede 8 gm ram işlemci amd fx x8 anakart gigabyte 970A-DS3P konuyu doğru yere açtım mı bilmiyorum eğer yanlış yere açtıysam kusura bakmayın, yardımcı olursanız çok sevinirim  :)
Mesela ne kadar sürede açılıyor? SSHD yok ise 20 sn belki de 30 snyi bulabilir. Fakat sshd var ise 8-12 sn civarı sürede açılması gerekir.
Önemli olan para değil, para ile ne yaptığındır, en iyi zenginlik ise gönül zenginliğidir. ;)

Gh0st

#2
30 Ekim 2015 - 20:52:12
Alıntı yapılan: MuhbirKedi - 30 Ekim 2015 - 20:48:19
Alıntı yapılan: Gh0st - 30 Ekim 2015 - 20:31:51
Merhaba uzun zamandır bu forumu takip ediyordum 2 hafta olması lazım sanırım önce yeni topladığım bilgisayarda ubuntu 14.04 LTS kurdum harddiske kurulu tek işletim sistemi olarak fakat bilgisayarın açılış ve kapanışında anormal bir yavaşlık var donanımları iyi derecede 8 gm ram işlemci amd fx x8 anakart gigabyte 970A-DS3P konuyu doğru yere açtım mı bilmiyorum eğer yanlış yere açtıysam kusura bakmayın, yardımcı olursanız çok sevinirim  :)
Mesela ne kadar sürede açılıyor? SSHD yok ise 20 sn belki de 30 snyi bulabilir. Fakat sshd var ise 8-12 sn civarı sürede açılması gerekir.
SSHD yok ama 1 dk falan sürüyor açılması o yüzden bir anormallik olduğunu düşündüm şimdiden yardım için teşekkürler :)
Bütün pusulaları atın çöpe. İnsan bir zaman kaybıdır yeryüzünde.

MuhbirKedi

#3
30 Ekim 2015 - 20:55:09
Benden oldukça uzman arkadaşlar size yardımcı olacaktır. Biraz bekleyin eminim döneceklerdir.
Önemli olan para değil, para ile ne yaptığındır, en iyi zenginlik ise gönül zenginliğidir. ;)

Gh0st

#4
30 Ekim 2015 - 20:56:29
Alıntı yapılan: MuhbirKedi - 30 Ekim 2015 - 20:55:09
Benden oldukça uzman arkadaşlar size yardımcı olacaktır. Biraz bekleyin eminim döneceklerdir.
Teşekkürler :)
Bütün pusulaları atın çöpe. İnsan bir zaman kaybıdır yeryüzünde.

ata1

#5
30 Ekim 2015 - 21:01:29
birçok nedeni olabilir öncelikle ekran kartı sürücüleri kurulumu gibi bir soru aklıma geldi

Gh0st

#6
30 Ekim 2015 - 21:05:28
Alıntı yapılan: eral - 30 Ekim 2015 - 21:01:29
birçok nedeni olabilir öncelikle ekran kartı sürücüleri kurulumu gibi bir soru aklıma geldi
Kod Seç
glxinfo | grep render
yazdığımda aldığım çıktı
Kod Seç
direct rendering: Yes
OpenGL renderer string: AMD Radeon HD 5450
    GL_ARB_compute_shader, GL_ARB_conditional_render_inverted,
    GL_KTX_buffer_region, GL_NV_blend_square, GL_NV_conditional_render,
    GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
    GL_KTX_buffer_region, GL_NV_blend_square, GL_NV_conditional_render,

Bütün pusulaları atın çöpe. İnsan bir zaman kaybıdır yeryüzünde.

ata1

#7
30 Ekim 2015 - 21:10:23

Gh0st

#8
30 Ekim 2015 - 21:16:24 Son düzenlenme: 30 Ekim 2015 - 21:45:40 Gh0st
Alıntı yapılan: eral - 30 Ekim 2015 - 21:10:23
https://forum.ubuntu-tr.net/index.php?topic=33412.0
şunlara bir göz atmak gerekir
Kod Seç
xrandr
çıktısı
Kod Seç
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
DFP1 disconnected (normal left inverted right x axis y axis)
DFP2 disconnected (normal left inverted right x axis y axis)
CRT1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 413mm x 234mm
   1366x768       59.8*+
   1360x768       60.0 
   1280x768       60.0 
   1280x720       60.0 
   1024x768       75.0     72.0     70.1     60.0 
   800x600        72.2     75.0     60.3     56.2 
   848x480        75.0     72.0     70.1     60.0 
   720x480        72.2     75.0     60.3     56.2 
   640x480        72.8     75.0     67.0     59.9 
CRT2 disconnected (normal left inverted right x axis y axis)

Kod Seç
glxinfo | grep render
çıktısı
Kod Seç
direct rendering: Yes
OpenGL renderer string: AMD Radeon HD 5450
    GL_ARB_compute_shader, GL_ARB_conditional_render_inverted,
    GL_KTX_buffer_region, GL_NV_blend_square, GL_NV_conditional_render,
    GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
    GL_KTX_buffer_region, GL_NV_blend_square, GL_NV_conditional_render,

Kod Seç
lspci | egrep "VGA|3D|Display
çıktısı
Kod Seç
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series]


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 30 Ekim 2015 - 21:45:40

Lazım olabilir diye düşündüm
Kod Seç
lspci
çıktısı
Kod Seç
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B)
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port D)
00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port H)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller (rev 40)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300 Series]
02:00.0 USB controller: VIA Technologies, Inc. Device 3483 (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)

Kod Seç
top
çıktısı ise
Kod Seç
5821 fsociety  20   0  721464  32200  24716 S   3,0  0,4   0:01.10 gnome-terminal                                                             
1544 root      20   0  405560 154260 119888 S   2,7  1,9  15:12.82 Xorg                                                                       
3575 fsociety  20   0 1445088 154912  95116 S   0,7  1,9   4:29.49 compiz                                                                     
5680 fsociety  20   0 1120416 224448  79576 S   0,7  2,8   0:31.10 firefox                                                                     
    7 root      20   0       0      0      0 S   0,3  0,0   0:03.42 rcu_sched                                                                   
  100 root      20   0       0      0      0 S   0,3  0,0   0:16.35 kworker/4:1                                                                 
3731 root      20   0       0      0      0 S   0,3  0,0   0:10.54 kworker/3:2                                                                 
5563 root      20   0       0      0      0 S   0,3  0,0   0:00.04 kworker/u16:2                                                               
    1 root      20   0   33656   4204   2672 S   0,0  0,1   0:01.11 init                                                                       
    2 root      20   0       0      0      0 S   0,0  0,0   0:00.00 kthreadd                                                                   
    3 root      20   0       0      0      0 S   0,0  0,0   0:00.02 ksoftirqd/0                                                                 
    5 root       0 -20       0      0      0 S   0,0  0,0   0:00.00 kworker/0:0H                                                               
    8 root      20   0       0      0      0 S   0,0  0,0   0:00.00 rcu_bh                                                                     
    9 root      20   0       0      0      0 S   0,0  0,0   0:00.87 rcuos/0                                                                     
   10 root      20   0       0      0      0 S   0,0  0,0   0:00.00 rcuob/0                                                                     
   11 root      rt   0       0      0      0 S   0,0  0,0   0:00.08 migration/0                                                                 
   12 root      rt   0       0      0      0 S   0,0  0,0   0:00.08 watchdog/0                                                                 
   13 root      rt   0       0      0      0 S   0,0  0,0   0:00.05 watchdog/1                                                                 
   14 root      rt   0       0      0      0 S   0,0  0,0   0:00.02 migration/1                                                                 
   15 root      20   0       0      0      0 S   0,0  0,0   0:00.10 ksoftirqd/1                                                                 
   17 root       0 -20       0      0      0 S   0,0  0,0   0:00.00 kworker/1:0H                                                               
   18 root      20   0       0      0      0 S   0,0  0,0   0:00.30 rcuos/1                                                                     
   19 root      20   0       0      0      0 S   0,0  0,0   0:00.00 rcuob/1                                                                     
   20 root      rt   0       0      0      0 S   0,0  0,0   0:00.07 watchdog/2                                                                 
   21 root      rt   0       0      0      0 S   0,0  0,0   0:00.14 migration/2                                                                 
   22 root      20   0       0      0      0 S   0,0  0,0   0:00.09 ksoftirqd/2                                                                 
   24 root       0 -20       0      0      0 S   0,0  0,0   0:00.00 kworker/2:0H                                                               
   25 root      20   0       0      0      0 S   0,0  0,0   0:00.55 rcuos/2                                                                     
   26 root      20   0       0      0      0 S   0,0  0,0   0:00.00 rcuob/2                                                                     
   27 root      rt   0       0      0      0 S   0,0  0,0   0:00.06 watchdog/3                                                                 
   28 root      rt   0       0      0      0 S   0,0  0,0   0:00.28 migration/3                                                                 
   29 root      20   0       0      0      0 S   0,0  0,0   0:00.12 ksoftirqd/3                                                                 
   31 root       0 -20       0      0      0 S   0,0  0,0   0:00.00 kworker/3:0H                                                               
   32 root      20   0       0      0      0 S   0,0  0,0   0:00.08 rcuos/3                                                                     
Bütün pusulaları atın çöpe. İnsan bir zaman kaybıdır yeryüzünde.

neynefes

#9
31 Ekim 2015 - 02:12:24
Kod Seç
dmesg -T > dmesg.log

Şu komutu uygulayıp sistemi yeniden başlattığınızda ana dizine bir log dosyası kaydedecek. Hem açılışın ne kadar sürdüğü hem de nerede oyalandığına bakabiliriz.

MuhbirKedi

#10
31 Ekim 2015 - 13:22:01
Alıntı yapılan: neynefes - 31 Ekim 2015 - 02:12:24
Kod Seç
dmesg -T > dmesg.log

Şu komutu uygulayıp sistemi yeniden başlattığınızda ana dizine bir log dosyası kaydedecek. Hem açılışın ne kadar sürdüğü hem de nerede oyalandığına bakabiliriz.
Sabote etmiyeyim ama benim çıktılarım ise şöyle;
Kod Seç
[Cts Eki 31 12:56:22 2015] Initializing cgroup subsys cpuset
[Cts Eki 31 12:56:22 2015] Initializing cgroup subsys cpu
[Cts Eki 31 12:56:22 2015] Initializing cgroup subsys cpuacct
[Cts Eki 31 12:56:22 2015] Linux version 3.19.0-31-generic (buildd@lgw01-21) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #36~14.04.1-Ubuntu SMP Thu Oct 8 10:21:08 UTC 2015 (Ubuntu 3.19.0-31.36~14.04.1-generic 3.19.8-ckt7)
[Cts Eki 31 12:56:22 2015] Command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-31-generic root=UUID=60320c9b-ea9c-40fa-9fcc-d50ea166b75b ro noprompt persistent quiet splash vt.handoff=7
[Cts Eki 31 12:56:22 2015] KERNEL supported cpus:
[Cts Eki 31 12:56:22 2015]   Intel GenuineIntel
[Cts Eki 31 12:56:22 2015]   AMD AuthenticAMD
[Cts Eki 31 12:56:22 2015]   Centaur CentaurHauls
[Cts Eki 31 12:56:22 2015] e820: BIOS-provided physical RAM map:
[Cts Eki 31 12:56:22 2015] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[Cts Eki 31 12:56:22 2015] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[Cts Eki 31 12:56:22 2015] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[Cts Eki 31 12:56:22 2015] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[Cts Eki 31 12:56:22 2015] BIOS-e820: [mem 0x0000000000100000-0x00000000a56affff] usable
[Cts Eki 31 12:56:22 2015] BIOS-e820: [mem 0x00000000a56b0000-0x00000000a5eaffff] reserved
[Cts Eki 31 12:56:22 2015] BIOS-e820: [mem 0x00000000a5eb0000-0x00000000aa6befff] usable
[Cts Eki 31 12:56:22 2015] BIOS-e820: [mem 0x00000000aa6bf000-0x00000000aa8befff] type 20
[Cts Eki 31 12:56:22 2015] BIOS-e820: [mem 0x00000000aa8bf000-0x00000000aaebefff] reserved
[Cts Eki 31 12:56:22 2015] BIOS-e820: [mem 0x00000000aaebf000-0x00000000aafbefff] ACPI NVS
[Cts Eki 31 12:56:22 2015] BIOS-e820: [mem 0x00000000aafbf000-0x00000000aaffefff] ACPI data
[Cts Eki 31 12:56:22 2015] BIOS-e820: [mem 0x00000000aafff000-0x00000000aaffffff] usable
[Cts Eki 31 12:56:22 2015] BIOS-e820: [mem 0x00000000ab000000-0x00000000af9fffff] reserved
[Cts Eki 31 12:56:22 2015] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[Cts Eki 31 12:56:22 2015] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[Cts Eki 31 12:56:22 2015] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[Cts Eki 31 12:56:22 2015] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[Cts Eki 31 12:56:22 2015] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[Cts Eki 31 12:56:22 2015] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[Cts Eki 31 12:56:22 2015] BIOS-e820: [mem 0x0000000100000000-0x000000024f5fffff] usable
[Cts Eki 31 12:56:22 2015] NX (Execute Disable) protection: active
[Cts Eki 31 12:56:22 2015] efi: EFI v2.31 by INSYDE Corp.
[Cts Eki 31 12:56:22 2015] efi:  ACPI=0xaaffe000  ACPI 2.0=0xaaffe014  SMBIOS=0xaaebef98
[Cts Eki 31 12:56:22 2015] SMBIOS 2.7 present.
[Cts Eki 31 12:56:22 2015] DMI: LENOVO 20354/Lancer 5A5, BIOS 9BCN29WW 10/20/2014
[Cts Eki 31 12:56:22 2015] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[Cts Eki 31 12:56:22 2015] e820: remove [mem 0x000a0000-0x000fffff] usable
[Cts Eki 31 12:56:22 2015] AGP: No AGP bridge found
[Cts Eki 31 12:56:22 2015] e820: last_pfn = 0x24f600 max_arch_pfn = 0x400000000
[Cts Eki 31 12:56:22 2015] MTRR default type: uncachable
[Cts Eki 31 12:56:22 2015] MTRR fixed ranges enabled:
[Cts Eki 31 12:56:22 2015]   00000-9FFFF write-back
[Cts Eki 31 12:56:22 2015]   A0000-BFFFF uncachable
[Cts Eki 31 12:56:22 2015]   C0000-E7FFF write-protect
[Cts Eki 31 12:56:22 2015]   E8000-EFFFF write-combining
[Cts Eki 31 12:56:22 2015]   F0000-FFFFF write-protect
[Cts Eki 31 12:56:22 2015] MTRR variable ranges enabled:
[Cts Eki 31 12:56:22 2015]   0 base 0000000000 mask 7C00000000 write-back
[Cts Eki 31 12:56:22 2015]   1 base 00AB000000 mask 7FFF000000 uncachable
[Cts Eki 31 12:56:22 2015]   2 base 00AC000000 mask 7FFC000000 uncachable
[Cts Eki 31 12:56:22 2015]   3 base 00B0000000 mask 7FF0000000 uncachable
[Cts Eki 31 12:56:22 2015]   4 base 00C0000000 mask 7FC0000000 uncachable
[Cts Eki 31 12:56:22 2015]   5 disabled
[Cts Eki 31 12:56:22 2015]   6 disabled
[Cts Eki 31 12:56:22 2015]   7 disabled
[Cts Eki 31 12:56:22 2015]   8 disabled
[Cts Eki 31 12:56:22 2015]   9 disabled
[Cts Eki 31 12:56:22 2015] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC 
[Cts Eki 31 12:56:22 2015] original variable MTRRs
[Cts Eki 31 12:56:22 2015] reg 0, base: 0GB, range: 16GB, type WB
[Cts Eki 31 12:56:22 2015] reg 1, base: 2736MB, range: 16MB, type UC
[Cts Eki 31 12:56:22 2015] reg 2, base: 2752MB, range: 64MB, type UC
[Cts Eki 31 12:56:22 2015] reg 3, base: 2816MB, range: 256MB, type UC
[Cts Eki 31 12:56:22 2015] reg 4, base: 3GB, range: 1GB, type UC
[Cts Eki 31 12:56:22 2015] total RAM covered: 15024M
[Cts Eki 31 12:56:22 2015] Found optimal setting for mtrr clean up
[Cts Eki 31 12:56:22 2015]  gran_size: 64K chunk_size: 64K num_reg: 7  lose cover RAM: 0G
[Cts Eki 31 12:56:22 2015] New variable MTRRs
[Cts Eki 31 12:56:22 2015] reg 0, base: 0GB, range: 2GB, type WB
[Cts Eki 31 12:56:22 2015] reg 1, base: 2GB, range: 512MB, type WB
[Cts Eki 31 12:56:22 2015] reg 2, base: 2560MB, range: 128MB, type WB
[Cts Eki 31 12:56:22 2015] reg 3, base: 2688MB, range: 32MB, type WB
[Cts Eki 31 12:56:22 2015] reg 4, base: 2720MB, range: 16MB, type WB
[Cts Eki 31 12:56:22 2015] reg 5, base: 4GB, range: 4GB, type WB
[Cts Eki 31 12:56:22 2015] reg 6, base: 8GB, range: 8GB, type WB
[Cts Eki 31 12:56:22 2015] e820: update [mem 0xab000000-0xffffffff] usable ==> reserved
[Cts Eki 31 12:56:22 2015] e820: last_pfn = 0xab000 max_arch_pfn = 0x400000000
[Cts Eki 31 12:56:22 2015] Scanning 1 areas for low memory corruption
[Cts Eki 31 12:56:22 2015] Base memory trampoline at [ffff880000082000] 82000 size 24576
[Cts Eki 31 12:56:22 2015] Using GB pages for direct mapping
[Cts Eki 31 12:56:22 2015] init_memory_mapping: [mem 0x00000000-0x000fffff]
[Cts Eki 31 12:56:22 2015]  [mem 0x00000000-0x000fffff] page 4k
[Cts Eki 31 12:56:22 2015] BRK [0x02fd4000, 0x02fd4fff] PGTABLE
[Cts Eki 31 12:56:22 2015] BRK [0x02fd5000, 0x02fd5fff] PGTABLE
[Cts Eki 31 12:56:22 2015] BRK [0x02fd6000, 0x02fd6fff] PGTABLE
[Cts Eki 31 12:56:22 2015] init_memory_mapping: [mem 0x24f400000-0x24f5fffff]
[Cts Eki 31 12:56:22 2015]  [mem 0x24f400000-0x24f5fffff] page 2M
[Cts Eki 31 12:56:22 2015] BRK [0x02fd7000, 0x02fd7fff] PGTABLE
[Cts Eki 31 12:56:22 2015] init_memory_mapping: [mem 0x240000000-0x24f3fffff]
[Cts Eki 31 12:56:22 2015]  [mem 0x240000000-0x24f3fffff] page 2M
[Cts Eki 31 12:56:22 2015] init_memory_mapping: [mem 0x220000000-0x23fffffff]
[Cts Eki 31 12:56:22 2015]  [mem 0x220000000-0x23fffffff] page 1G
[Cts Eki 31 12:56:22 2015] init_memory_mapping: [mem 0x00100000-0xa56affff]
[Cts Eki 31 12:56:22 2015]  [mem 0x00100000-0x001fffff] page 4k
[Cts Eki 31 12:56:22 2015]  [mem 0x00200000-0x3fffffff] page 2M
[Cts Eki 31 12:56:22 2015]  [mem 0x40000000-0x7fffffff] page 1G
[Cts Eki 31 12:56:22 2015]  [mem 0x80000000-0xa55fffff] page 2M
[Cts Eki 31 12:56:22 2015]  [mem 0xa5600000-0xa56affff] page 4k
[Cts Eki 31 12:56:22 2015] init_memory_mapping: [mem 0xa5eb0000-0xaa6befff]
[Cts Eki 31 12:56:22 2015]  [mem 0xa5eb0000-0xa5ffffff] page 4k
[Cts Eki 31 12:56:22 2015]  [mem 0xa6000000-0xaa5fffff] page 2M
[Cts Eki 31 12:56:22 2015]  [mem 0xaa600000-0xaa6befff] page 4k
[Cts Eki 31 12:56:22 2015] BRK [0x02fd8000, 0x02fd8fff] PGTABLE
[Cts Eki 31 12:56:22 2015] BRK [0x02fd9000, 0x02fd9fff] PGTABLE
[Cts Eki 31 12:56:22 2015] init_memory_mapping: [mem 0xaafff000-0xaaffffff]
[Cts Eki 31 12:56:22 2015]  [mem 0xaafff000-0xaaffffff] page 4k
[Cts Eki 31 12:56:22 2015] init_memory_mapping: [mem 0x100000000-0x21fffffff]
[Cts Eki 31 12:56:22 2015]  [mem 0x100000000-0x21fffffff] page 1G
[Cts Eki 31 12:56:22 2015] RAMDISK: [mem 0x35a2a000-0x36d0cfff]
[Cts Eki 31 12:56:22 2015] ACPI: Early table checksum verification disabled
[Cts Eki 31 12:56:22 2015] ACPI: RSDP 0x00000000AAFFE014 000024 (v02 LENOVO)
[Cts Eki 31 12:56:22 2015] ACPI: XSDT 0x00000000AAFFE210 0000C4 (v01 LENOVO CB-01    00000001      01000013)
[Cts Eki 31 12:56:22 2015] ACPI: FACP 0x00000000AAFF7000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: DSDT 0x00000000AAFE4000 00F4BB (v02 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: FACS 0x00000000AAFBA000 000040
[Cts Eki 31 12:56:22 2015] ACPI: SLIC 0x00000000AAFFD000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: UEFI 0x00000000AAFFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: FPDT 0x00000000AAFFA000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: MSDM 0x00000000AAFF9000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: ASF! 0x00000000AAFF8000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: HPET 0x00000000AAFF6000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: APIC 0x00000000AAFF5000 00008C (v03 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: MCFG 0x00000000AAFF4000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: WDAT 0x00000000AAFE3000 000224 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: SSDT 0x00000000AAFE0000 002028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: BOOT 0x00000000AAFDE000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: LPIT 0x00000000AAFDD000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: ASPT 0x00000000AAFDB000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: DBGP 0x00000000AAFDA000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: SSDT 0x00000000AAFD2000 000539 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: SSDT 0x00000000AAFD1000 000AD8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: SSDT 0x00000000AAFCD000 0034F8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: SSDT 0x00000000AAFC8000 0034B3 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: BGRT 0x00000000AAFCC000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[Cts Eki 31 12:56:22 2015] ACPI: Local APIC address 0xfee00000
[Cts Eki 31 12:56:22 2015] No NUMA configuration found
[Cts Eki 31 12:56:22 2015] Faking a node at [mem 0x0000000000000000-0x000000024f5fffff]
[Cts Eki 31 12:56:22 2015] NODE_DATA(0) allocated [mem 0x24f5f8000-0x24f5fcfff]
[Cts Eki 31 12:56:22 2015]  [ffffea0000000000-ffffea00093fffff] PMD -> [ffff880246c00000-ffff88024ebfffff] on node 0
[Cts Eki 31 12:56:22 2015] Zone ranges:
[Cts Eki 31 12:56:22 2015]   DMA      [mem 0x00001000-0x00ffffff]
[Cts Eki 31 12:56:22 2015]   DMA32    [mem 0x01000000-0xffffffff]
[Cts Eki 31 12:56:22 2015]   Normal   [mem 0x100000000-0x24f5fffff]
[Cts Eki 31 12:56:22 2015] Movable zone start for each node
[Cts Eki 31 12:56:22 2015] Early memory node ranges
[Cts Eki 31 12:56:22 2015]   node   0: [mem 0x00001000-0x0006efff]
[Cts Eki 31 12:56:22 2015]   node   0: [mem 0x00070000-0x00087fff]
[Cts Eki 31 12:56:22 2015]   node   0: [mem 0x00100000-0xa56affff]
[Cts Eki 31 12:56:22 2015]   node   0: [mem 0xa5eb0000-0xaa6befff]
[Cts Eki 31 12:56:22 2015]   node   0: [mem 0xaafff000-0xaaffffff]
[Cts Eki 31 12:56:22 2015]   node   0: [mem 0x100000000-0x24f5fffff]
[Cts Eki 31 12:56:22 2015] Initmem setup node 0 [mem 0x00001000-0x24f5fffff]
[Cts Eki 31 12:56:22 2015] On node 0 totalpages: 2069574
[Cts Eki 31 12:56:22 2015]   DMA zone: 64 pages used for memmap
[Cts Eki 31 12:56:22 2015]   DMA zone: 24 pages reserved
[Cts Eki 31 12:56:22 2015]   DMA zone: 3974 pages, LIFO batch:0
[Cts Eki 31 12:56:22 2015]   DMA32 zone: 10811 pages used for memmap
[Cts Eki 31 12:56:22 2015]   DMA32 zone: 691904 pages, LIFO batch:31
[Cts Eki 31 12:56:22 2015]   Normal zone: 21464 pages used for memmap
[Cts Eki 31 12:56:22 2015]   Normal zone: 1373696 pages, LIFO batch:31
[Cts Eki 31 12:56:22 2015] Reserving Intel graphics stolen memory at 0xaba00000-0xaf9fffff
[Cts Eki 31 12:56:22 2015] ACPI: PM-Timer IO Port: 0x1808
[Cts Eki 31 12:56:22 2015] ACPI: Local APIC address 0xfee00000
[Cts Eki 31 12:56:22 2015] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[Cts Eki 31 12:56:22 2015] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[Cts Eki 31 12:56:22 2015] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[Cts Eki 31 12:56:22 2015] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[Cts Eki 31 12:56:22 2015] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[Cts Eki 31 12:56:22 2015] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[Cts Eki 31 12:56:22 2015] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[Cts Eki 31 12:56:22 2015] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[Cts Eki 31 12:56:22 2015] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[Cts Eki 31 12:56:22 2015] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[Cts Eki 31 12:56:22 2015] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[Cts Eki 31 12:56:22 2015] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[Cts Eki 31 12:56:22 2015] ACPI: IRQ0 used by override.
[Cts Eki 31 12:56:22 2015] ACPI: IRQ9 used by override.
[Cts Eki 31 12:56:22 2015] Using ACPI (MADT) for SMP configuration information
[Cts Eki 31 12:56:22 2015] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[Cts Eki 31 12:56:22 2015] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0xa56b0000-0xa5eaffff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0xaa6bf000-0xaa8befff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0xaa8bf000-0xaaebefff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0xaaebf000-0xaafbefff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0xaafbf000-0xaaffefff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0xab000000-0xaf9fffff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[Cts Eki 31 12:56:22 2015] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[Cts Eki 31 12:56:22 2015] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
[Cts Eki 31 12:56:22 2015] Booting paravirtualized kernel on bare hardware
[Cts Eki 31 12:56:22 2015] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[Cts Eki 31 12:56:22 2015] PERCPU: Embedded 31 pages/cpu @ffff88024f200000 s86144 r8192 d32640 u262144
[Cts Eki 31 12:56:22 2015] pcpu-alloc: s86144 r8192 d32640 u262144 alloc=1*2097152
[Cts Eki 31 12:56:22 2015] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[Cts Eki 31 12:56:22 2015] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2037211
[Cts Eki 31 12:56:22 2015] Policy zone: Normal
[Cts Eki 31 12:56:22 2015] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-31-generic root=UUID=60320c9b-ea9c-40fa-9fcc-d50ea166b75b ro noprompt persistent quiet splash vt.handoff=7
[Cts Eki 31 12:56:22 2015] PID hash table entries: 4096 (order: 3, 32768 bytes)
[Cts Eki 31 12:56:22 2015] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[Cts Eki 31 12:56:22 2015] AGP: Checking aperture...
[Cts Eki 31 12:56:22 2015] AGP: No AGP bridge found
[Cts Eki 31 12:56:22 2015] Calgary: detecting Calgary via BIOS EBDA area
[Cts Eki 31 12:56:22 2015] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[Cts Eki 31 12:56:22 2015] Memory: 7969548K/8278296K available (7920K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 308748K reserved, 0K cma-reserved)
[Cts Eki 31 12:56:22 2015] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[Cts Eki 31 12:56:22 2015] Hierarchical RCU implementation.
[Cts Eki 31 12:56:22 2015] RCU dyntick-idle grace-period acceleration is enabled.
[Cts Eki 31 12:56:22 2015] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[Cts Eki 31 12:56:22 2015] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[Cts Eki 31 12:56:22 2015] NR_IRQS:16640 nr_irqs:760 16
[Cts Eki 31 12:56:22 2015] Offload RCU callbacks from all CPUs
[Cts Eki 31 12:56:22 2015] Offload RCU callbacks from CPUs: 0-7.
[Cts Eki 31 12:56:22 2015] vt handoff: transparent VT on vt#7
[Cts Eki 31 12:56:22 2015] Console: colour dummy device 80x25
[Cts Eki 31 12:56:22 2015] console [tty0] enabled
[Cts Eki 31 12:56:22 2015] hpet clockevent registered
[Cts Eki 31 12:56:22 2015] tsc: Fast TSC calibration using PIT
[Cts Eki 31 12:56:22 2015] tsc: Detected 2394.585 MHz processor
[Cts Eki 31 12:56:22 2015] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.17 BogoMIPS (lpj=9578340)
[Cts Eki 31 12:56:22 2015] pid_max: default: 32768 minimum: 301
[Cts Eki 31 12:56:22 2015] ACPI: Core revision 20141107
[Cts Eki 31 12:56:22 2015] ACPI: All ACPI Tables successfully acquired
[Cts Eki 31 12:56:22 2015] Security Framework initialized
[Cts Eki 31 12:56:22 2015] AppArmor: AppArmor initialized
[Cts Eki 31 12:56:22 2015] Yama: becoming mindful.
[Cts Eki 31 12:56:22 2015] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[Cts Eki 31 12:56:22 2015] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[Cts Eki 31 12:56:22 2015] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[Cts Eki 31 12:56:22 2015] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[Cts Eki 31 12:56:22 2015] Initializing cgroup subsys memory
[Cts Eki 31 12:56:22 2015] Initializing cgroup subsys devices
[Cts Eki 31 12:56:22 2015] Initializing cgroup subsys freezer
[Cts Eki 31 12:56:22 2015] Initializing cgroup subsys net_cls
[Cts Eki 31 12:56:22 2015] Initializing cgroup subsys blkio
[Cts Eki 31 12:56:22 2015] Initializing cgroup subsys perf_event
[Cts Eki 31 12:56:22 2015] Initializing cgroup subsys net_prio
[Cts Eki 31 12:56:22 2015] Initializing cgroup subsys hugetlb
[Cts Eki 31 12:56:22 2015] CPU: Physical Processor ID: 0
[Cts Eki 31 12:56:22 2015] CPU: Processor Core ID: 0
[Cts Eki 31 12:56:22 2015] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[Cts Eki 31 12:56:22 2015] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[Cts Eki 31 12:56:22 2015] mce: CPU supports 7 MCE banks
[Cts Eki 31 12:56:22 2015] CPU0: Thermal monitoring enabled (TM1)
[Cts Eki 31 12:56:22 2015] process: using mwait in idle threads
[Cts Eki 31 12:56:22 2015] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[Cts Eki 31 12:56:22 2015] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[Cts Eki 31 12:56:22 2015] Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
[Cts Eki 31 12:56:22 2015] Ignoring BGRT: invalid status 0 (expected 1)
[Cts Eki 31 12:56:22 2015] ftrace: allocating 30020 entries in 118 pages
[Cts Eki 31 12:56:22 2015] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[Cts Eki 31 12:56:22 2015] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (fam: 06, model: 45, stepping: 01)
[Cts Eki 31 12:56:22 2015] TSC deadline timer enabled
[Cts Eki 31 12:56:22 2015] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[Cts Eki 31 12:56:22 2015] ... version:                3
[Cts Eki 31 12:56:22 2015] ... bit width:              48
[Cts Eki 31 12:56:22 2015] ... generic registers:      4
[Cts Eki 31 12:56:22 2015] ... value mask:             0000ffffffffffff
[Cts Eki 31 12:56:22 2015] ... max period:             0000ffffffffffff
[Cts Eki 31 12:56:22 2015] ... fixed-purpose events:   3
[Cts Eki 31 12:56:22 2015] ... event mask:             000000070000000f
[Cts Eki 31 12:56:22 2015] x86: Booting SMP configuration:
[Cts Eki 31 12:56:22 2015] .... node  #0, CPUs:      #1
[Cts Eki 31 12:56:22 2015] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[Cts Eki 31 12:56:22 2015]  #2 #3
[Cts Eki 31 12:56:22 2015] x86: Booted up 1 node, 4 CPUs
[Cts Eki 31 12:56:22 2015] smpboot: Total of 4 processors activated (19156.68 BogoMIPS)
[Cts Eki 31 12:56:22 2015] devtmpfs: initialized
[Cts Eki 31 12:56:22 2015] evm: security.selinux
[Cts Eki 31 12:56:22 2015] evm: security.SMACK64
[Cts Eki 31 12:56:22 2015] evm: security.SMACK64EXEC
[Cts Eki 31 12:56:22 2015] evm: security.SMACK64TRANSMUTE
[Cts Eki 31 12:56:22 2015] evm: security.SMACK64MMAP
[Cts Eki 31 12:56:22 2015] evm: security.ima
[Cts Eki 31 12:56:22 2015] evm: security.capability
[Cts Eki 31 12:56:22 2015] PM: Registering ACPI NVS region [mem 0xaaebf000-0xaafbefff] (1048576 bytes)
[Cts Eki 31 12:56:22 2015] pinctrl core: initialized pinctrl subsystem
[Cts Eki 31 12:56:22 2015] RTC time: 12:56:22, date: 10/31/15
[Cts Eki 31 12:56:22 2015] NET: Registered protocol family 16
[Cts Eki 31 12:56:22 2015] cpuidle: using governor ladder
[Cts Eki 31 12:56:22 2015] cpuidle: using governor menu
[Cts Eki 31 12:56:22 2015] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[Cts Eki 31 12:56:22 2015] ACPI: bus type PCI registered
[Cts Eki 31 12:56:22 2015] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[Cts Eki 31 12:56:22 2015] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[Cts Eki 31 12:56:22 2015] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[Cts Eki 31 12:56:22 2015] PCI: Using configuration type 1 for base access
[Cts Eki 31 12:56:22 2015] ACPI: Added _OSI(Module Device)
[Cts Eki 31 12:56:22 2015] ACPI: Added _OSI(Processor Device)
[Cts Eki 31 12:56:22 2015] ACPI: Added _OSI(3.0 _SCP Extensions)
[Cts Eki 31 12:56:22 2015] ACPI: Added _OSI(Processor Aggregator Device)
[Cts Eki 31 12:56:22 2015] ACPI: Executed 2 blocks of module-level executable AML code
[Cts Eki 31 12:56:22 2015] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[Cts Eki 31 12:56:22 2015] ACPI: Dynamic OEM Table Load:
[Cts Eki 31 12:56:22 2015] ACPI: SSDT 0xFFFF880245609C00 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20121220)
[Cts Eki 31 12:56:22 2015] ACPI: Dynamic OEM Table Load:
[Cts Eki 31 12:56:22 2015] ACPI: SSDT 0xFFFF880245553800 0005AA (v01 PmRef  ApIst    00003000 INTL 20121220)
[Cts Eki 31 12:56:22 2015] ACPI: Dynamic OEM Table Load:
[Cts Eki 31 12:56:22 2015] ACPI: SSDT 0xFFFF880245660400 000119 (v01 PmRef  ApCst    00003000 INTL 20121220)
[Cts Eki 31 12:56:22 2015] ACPI: Interpreter enabled
[Cts Eki 31 12:56:22 2015] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[Cts Eki 31 12:56:22 2015] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[Cts Eki 31 12:56:22 2015] ACPI: (supports S0 S3 S4 S5)
[Cts Eki 31 12:56:22 2015] ACPI: Using IOAPIC for interrupt routing
[Cts Eki 31 12:56:22 2015] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Cts Eki 31 12:56:22 2015] ACPI: Power Resource [NVP3] (on)
[Cts Eki 31 12:56:22 2015] ACPI: Power Resource [NVP2] (on)
[Cts Eki 31 12:56:22 2015] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[Cts Eki 31 12:56:22 2015] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[Cts Eki 31 12:56:22 2015] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[Cts Eki 31 12:56:22 2015] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[Cts Eki 31 12:56:22 2015] PCI host bridge to bus 0000:00
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: root bus resource [bus 00-fe]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
[Cts Eki 31 12:56:22 2015] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[Cts Eki 31 12:56:22 2015] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[Cts Eki 31 12:56:22 2015] pci 0000:00:02.0: reg 0x10: [mem 0xc3000000-0xc33fffff 64bit]
[Cts Eki 31 12:56:22 2015] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[Cts Eki 31 12:56:22 2015] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[Cts Eki 31 12:56:22 2015] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[Cts Eki 31 12:56:22 2015] pci 0000:00:03.0: reg 0x10: [mem 0xc3610000-0xc3613fff 64bit]
[Cts Eki 31 12:56:22 2015] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[Cts Eki 31 12:56:22 2015] pci 0000:00:14.0: reg 0x10: [mem 0xc3600000-0xc360ffff 64bit]
[Cts Eki 31 12:56:22 2015] pci 0000:00:14.0: PME# supported from D3hot D3cold
[Cts Eki 31 12:56:22 2015] pci 0000:00:14.0: System wakeup disabled by ACPI
[Cts Eki 31 12:56:22 2015] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[Cts Eki 31 12:56:22 2015] pci 0000:00:16.0: reg 0x10: [mem 0xc3618000-0xc361801f 64bit]
[Cts Eki 31 12:56:22 2015] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[Cts Eki 31 12:56:22 2015] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[Cts Eki 31 12:56:22 2015] pci 0000:00:1b.0: reg 0x10: [mem 0xc3614000-0xc3617fff 64bit]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[Cts Eki 31 12:56:22 2015] pci 0000:00:1b.0: System wakeup disabled by ACPI
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.0: System wakeup disabled by ACPI
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.3: System wakeup disabled by ACPI
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.4: System wakeup disabled by ACPI
[Cts Eki 31 12:56:22 2015] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[Cts Eki 31 12:56:22 2015] pci 0000:00:1d.0: reg 0x10: [mem 0xc361c000-0xc361c3ff]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[Cts Eki 31 12:56:22 2015] pci 0000:00:1d.0: System wakeup disabled by ACPI
[Cts Eki 31 12:56:22 2015] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[Cts Eki 31 12:56:22 2015] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[Cts Eki 31 12:56:22 2015] pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1f.2: reg 0x14: [io  0x5094-0x5097]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1f.2: reg 0x1c: [io  0x5090-0x5093]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1f.2: reg 0x24: [mem 0xc361b000-0xc361b7ff]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1f.2: PME# supported from D3hot
[Cts Eki 31 12:56:22 2015] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[Cts Eki 31 12:56:22 2015] pci 0000:00:1f.3: reg 0x10: [mem 0xc3619000-0xc36190ff 64bit]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1f.3: reg 0x20: [io  0x5040-0x505f]
[Cts Eki 31 12:56:22 2015] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[Cts Eki 31 12:56:22 2015] pci 0000:01:00.0: reg 0x10: [io  0x4000-0x40ff]
[Cts Eki 31 12:56:22 2015] pci 0000:01:00.0: reg 0x18: [mem 0xc3504000-0xc3504fff 64bit]
[Cts Eki 31 12:56:22 2015] pci 0000:01:00.0: reg 0x20: [mem 0xc3500000-0xc3503fff 64bit]
[Cts Eki 31 12:56:22 2015] pci 0000:01:00.0: supports D1 D2
[Cts Eki 31 12:56:22 2015] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[Cts Eki 31 12:56:22 2015] pci 0000:01:00.0: System wakeup disabled by ACPI
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.0: PCI bridge to [bus 01]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.0:   bridge window [mem 0xc3500000-0xc35fffff]
[Cts Eki 31 12:56:22 2015] pci 0000:02:00.0: [8086:08b4] type 00 class 0x028000
[Cts Eki 31 12:56:22 2015] pci 0000:02:00.0: reg 0x10: [mem 0xc3400000-0xc3401fff 64bit]
[Cts Eki 31 12:56:22 2015] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[Cts Eki 31 12:56:22 2015] pci 0000:02:00.0: System wakeup disabled by ACPI
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.3: PCI bridge to [bus 02]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.3:   bridge window [mem 0xc3400000-0xc34fffff]
[Cts Eki 31 12:56:22 2015] pci 0000:03:00.0: [10de:1341] type 00 class 0x030200
[Cts Eki 31 12:56:22 2015] pci 0000:03:00.0: reg 0x10: [mem 0xc2000000-0xc2ffffff]
[Cts Eki 31 12:56:22 2015] pci 0000:03:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[Cts Eki 31 12:56:22 2015] pci 0000:03:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[Cts Eki 31 12:56:22 2015] pci 0000:03:00.0: reg 0x24: [io  0x3000-0x307f]
[Cts Eki 31 12:56:22 2015] pci 0000:03:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[Cts Eki 31 12:56:22 2015] pci 0000:03:00.0: System wakeup disabled by ACPI
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.4: PCI bridge to [bus 03]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.4:   bridge window [mem 0xc2000000-0xc2ffffff]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.4:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[Cts Eki 31 12:56:22 2015] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[Cts Eki 31 12:56:22 2015] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[Cts Eki 31 12:56:22 2015] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[Cts Eki 31 12:56:22 2015] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[Cts Eki 31 12:56:22 2015] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[Cts Eki 31 12:56:22 2015] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[Cts Eki 31 12:56:22 2015] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[Cts Eki 31 12:56:22 2015] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[Cts Eki 31 12:56:22 2015] ACPI: Enabled 4 GPEs in block 00 to 7F
[Cts Eki 31 12:56:22 2015] ACPI : EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62
[Cts Eki 31 12:56:22 2015] vgaarb: setting as boot device: PCI:0000:00:02.0
[Cts Eki 31 12:56:22 2015] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[Cts Eki 31 12:56:22 2015] vgaarb: loaded
[Cts Eki 31 12:56:22 2015] vgaarb: bridge control possible 0000:00:02.0
[Cts Eki 31 12:56:22 2015] SCSI subsystem initialized
[Cts Eki 31 12:56:22 2015] libata version 3.00 loaded.
[Cts Eki 31 12:56:22 2015] ACPI: bus type USB registered
[Cts Eki 31 12:56:22 2015] usbcore: registered new interface driver usbfs
[Cts Eki 31 12:56:22 2015] usbcore: registered new interface driver hub
[Cts Eki 31 12:56:22 2015] usbcore: registered new device driver usb
[Cts Eki 31 12:56:22 2015] PCI: Using ACPI for IRQ routing
[Cts Eki 31 12:56:22 2015] PCI: pci_cache_line_size set to 64 bytes
[Cts Eki 31 12:56:22 2015] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[Cts Eki 31 12:56:22 2015] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[Cts Eki 31 12:56:22 2015] e820: reserve RAM buffer [mem 0xa56b0000-0xa7ffffff]
[Cts Eki 31 12:56:22 2015] e820: reserve RAM buffer [mem 0xaa6bf000-0xabffffff]
[Cts Eki 31 12:56:22 2015] e820: reserve RAM buffer [mem 0xab000000-0xabffffff]
[Cts Eki 31 12:56:22 2015] e820: reserve RAM buffer [mem 0x24f600000-0x24fffffff]
[Cts Eki 31 12:56:22 2015] NetLabel: Initializing
[Cts Eki 31 12:56:22 2015] NetLabel:  domain hash size = 128
[Cts Eki 31 12:56:22 2015] NetLabel:  protocols = UNLABELED CIPSOv4
[Cts Eki 31 12:56:22 2015] NetLabel:  unlabeled traffic allowed by default
[Cts Eki 31 12:56:22 2015] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[Cts Eki 31 12:56:22 2015] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[Cts Eki 31 12:56:22 2015] Switched to clocksource hpet
[Cts Eki 31 12:56:22 2015] AppArmor: AppArmor Filesystem Enabled
[Cts Eki 31 12:56:22 2015] pnp: PnP ACPI init
[Cts Eki 31 12:56:22 2015] system 00:00: [io  0x0680-0x069f] has been reserved
[Cts Eki 31 12:56:22 2015] system 00:00: [io  0xffff] has been reserved
[Cts Eki 31 12:56:22 2015] system 00:00: [io  0xffff] has been reserved
[Cts Eki 31 12:56:22 2015] system 00:00: [io  0xffff] has been reserved
[Cts Eki 31 12:56:22 2015] system 00:00: [io  0x1800-0x18fe] could not be reserved
[Cts Eki 31 12:56:22 2015] system 00:00: [io  0x164e-0x164f] has been reserved
[Cts Eki 31 12:56:22 2015] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[Cts Eki 31 12:56:22 2015] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[Cts Eki 31 12:56:22 2015] system 00:02: [io  0x1854-0x1857] has been reserved
[Cts Eki 31 12:56:22 2015] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[Cts Eki 31 12:56:22 2015] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[Cts Eki 31 12:56:22 2015] pnp 00:04: Plug and Play ACPI device, IDs ETD0624 ETD0000 PNP0f13 (active)
[Cts Eki 31 12:56:22 2015] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[Cts Eki 31 12:56:22 2015] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[Cts Eki 31 12:56:22 2015] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[Cts Eki 31 12:56:22 2015] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[Cts Eki 31 12:56:22 2015] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[Cts Eki 31 12:56:22 2015] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[Cts Eki 31 12:56:22 2015] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[Cts Eki 31 12:56:22 2015] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[Cts Eki 31 12:56:22 2015] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[Cts Eki 31 12:56:22 2015] system 00:05: [mem 0xafa20000-0xafa20fff] has been reserved
[Cts Eki 31 12:56:22 2015] system 00:05: [mem 0xafa10000-0xafa1ffff] has been reserved
[Cts Eki 31 12:56:22 2015] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[Cts Eki 31 12:56:22 2015] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[Cts Eki 31 12:56:22 2015] pnp: PnP ACPI: found 7 devices
[Cts Eki 31 12:56:22 2015] pci 0000:03:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.0: PCI bridge to [bus 01]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.0:   bridge window [mem 0xc3500000-0xc35fffff]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.3: PCI bridge to [bus 02]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.3:   bridge window [mem 0xc3400000-0xc34fffff]
[Cts Eki 31 12:56:22 2015] pci 0000:03:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[Cts Eki 31 12:56:22 2015] pci 0000:03:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.4: PCI bridge to [bus 03]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.4:   bridge window [mem 0xc2000000-0xc2ffffff]
[Cts Eki 31 12:56:22 2015] pci 0000:00:1c.4:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:00: resource 15 [mem 0xafa00000-0xfeafffff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:01: resource 1 [mem 0xc3500000-0xc35fffff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc34fffff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:03: resource 1 [mem 0xc2000000-0xc2ffffff]
[Cts Eki 31 12:56:22 2015] pci_bus 0000:03: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[Cts Eki 31 12:56:22 2015] NET: Registered protocol family 2
[Cts Eki 31 12:56:22 2015] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[Cts Eki 31 12:56:22 2015] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[Cts Eki 31 12:56:22 2015] TCP: Hash tables configured (established 65536 bind 65536)
[Cts Eki 31 12:56:22 2015] TCP: reno registered
[Cts Eki 31 12:56:22 2015] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[Cts Eki 31 12:56:22 2015] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[Cts Eki 31 12:56:22 2015] NET: Registered protocol family 1
[Cts Eki 31 12:56:22 2015] pci 0000:00:02.0: Video device with shadowed ROM
[Cts Eki 31 12:56:22 2015] PCI: CLS 64 bytes, default 64
[Cts Eki 31 12:56:22 2015] Trying to unpack rootfs image as initramfs...
[Cts Eki 31 12:56:22 2015] Freeing initrd memory: 19340K (ffff880035a2a000 - ffff880036d0d000)
[Cts Eki 31 12:56:22 2015] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[Cts Eki 31 12:56:22 2015] software IO TLB [mem 0x9eec0000-0xa2ec0000] (64MB) mapped at [ffff88009eec0000-ffff8800a2ebffff]
[Cts Eki 31 12:56:22 2015] Simple Boot Flag at 0x44 set to 0x1
[Cts Eki 31 12:56:22 2015] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[Cts Eki 31 12:56:22 2015] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
[Cts Eki 31 12:56:22 2015] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
[Cts Eki 31 12:56:22 2015] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
[Cts Eki 31 12:56:22 2015] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
[Cts Eki 31 12:56:22 2015] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[Cts Eki 31 12:56:22 2015] Scanning for low memory corruption every 60 seconds
[Cts Eki 31 12:56:22 2015] futex hash table entries: 2048 (order: 5, 131072 bytes)
[Cts Eki 31 12:56:22 2015] Initialise system trusted keyring
[Cts Eki 31 12:56:22 2015] audit: initializing netlink subsys (disabled)
[Cts Eki 31 12:56:22 2015] audit: type=2000 audit(1446296182.736:1): initialized
[Cts Eki 31 12:56:22 2015] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[Cts Eki 31 12:56:22 2015] zpool: loaded
[Cts Eki 31 12:56:22 2015] zbud: loaded
[Cts Eki 31 12:56:22 2015] VFS: Disk quotas dquot_6.5.2
[Cts Eki 31 12:56:22 2015] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[Cts Eki 31 12:56:22 2015] fuse init (API version 7.23)
[Cts Eki 31 12:56:22 2015] Key type big_key registered
[Cts Eki 31 12:56:22 2015] Key type asymmetric registered
[Cts Eki 31 12:56:22 2015] Asymmetric key parser 'x509' registered
[Cts Eki 31 12:56:22 2015] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[Cts Eki 31 12:56:22 2015] io scheduler noop registered
[Cts Eki 31 12:56:22 2015] io scheduler deadline registered (default)
[Cts Eki 31 12:56:22 2015] io scheduler cfq registered
[Cts Eki 31 12:56:22 2015] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[Cts Eki 31 12:56:22 2015] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[Cts Eki 31 12:56:22 2015] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[Cts Eki 31 12:56:22 2015] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[Cts Eki 31 12:56:22 2015] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[Cts Eki 31 12:56:22 2015] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[Cts Eki 31 12:56:22 2015] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[Cts Eki 31 12:56:22 2015] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[Cts Eki 31 12:56:22 2015] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[Cts Eki 31 12:56:22 2015] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[Cts Eki 31 12:56:22 2015] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[Cts Eki 31 12:56:22 2015] efifb: probing for efifb
[Cts Eki 31 12:56:22 2015] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90010f00000, using 8128k, total 8128k
[Cts Eki 31 12:56:22 2015] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[Cts Eki 31 12:56:22 2015] efifb: scrolling: redraw
[Cts Eki 31 12:56:22 2015] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[Cts Eki 31 12:56:22 2015] Console: switching to colour frame buffer device 240x67
[Cts Eki 31 12:56:22 2015] fb0: EFI VGA frame buffer device
[Cts Eki 31 12:56:22 2015] intel_idle: MWAIT substates: 0x11142120
[Cts Eki 31 12:56:22 2015] intel_idle: v0.4 model 0x45
[Cts Eki 31 12:56:22 2015] intel_idle: lapic_timer_reliable_states 0xffffffff
[Cts Eki 31 12:56:23 2015] tsc: Refined TSC clocksource calibration: 2394.456 MHz
[Cts Eki 31 12:56:24 2015] Switched to clocksource tsc
[Cts Eki 31 12:56:24 2015] ACPI: AC Adapter [ADP0] (on-line)
[Cts Eki 31 12:56:24 2015] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[Cts Eki 31 12:56:24 2015] ACPI: Lid Switch [LID0]
[Cts Eki 31 12:56:24 2015] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[Cts Eki 31 12:56:24 2015] ACPI: Power Button [PWRB]
[Cts Eki 31 12:56:24 2015] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[Cts Eki 31 12:56:24 2015] ACPI: Power Button [PWRF]
[Cts Eki 31 12:56:24 2015] GHES: HEST is not enabled!
[Cts Eki 31 12:56:24 2015] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[Cts Eki 31 12:56:24 2015] Linux agpgart interface v0.103
[Cts Eki 31 12:56:24 2015] brd: module loaded
[Cts Eki 31 12:56:24 2015] loop: module loaded
[Cts Eki 31 12:56:24 2015] libphy: Fixed MDIO Bus: probed
[Cts Eki 31 12:56:24 2015] tun: Universal TUN/TAP device driver, 1.6
[Cts Eki 31 12:56:24 2015] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[Cts Eki 31 12:56:24 2015] PPP generic driver version 2.4.2
[Cts Eki 31 12:56:24 2015] xhci_hcd 0000:00:14.0: xHCI Host Controller
[Cts Eki 31 12:56:24 2015] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[Cts Eki 31 12:56:24 2015] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[Cts Eki 31 12:56:24 2015] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Cts Eki 31 12:56:24 2015] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Cts Eki 31 12:56:24 2015] usb usb1: Product: xHCI Host Controller
[Cts Eki 31 12:56:24 2015] usb usb1: Manufacturer: Linux 3.19.0-31-generic xhci-hcd
[Cts Eki 31 12:56:24 2015] usb usb1: SerialNumber: 0000:00:14.0
[Cts Eki 31 12:56:24 2015] hub 1-0:1.0: USB hub found
[Cts Eki 31 12:56:24 2015] hub 1-0:1.0: 9 ports detected
[Cts Eki 31 12:56:24 2015] xhci_hcd 0000:00:14.0: xHCI Host Controller
[Cts Eki 31 12:56:24 2015] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[Cts Eki 31 12:56:24 2015] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[Cts Eki 31 12:56:24 2015] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Cts Eki 31 12:56:24 2015] usb usb2: Product: xHCI Host Controller
[Cts Eki 31 12:56:24 2015] usb usb2: Manufacturer: Linux 3.19.0-31-generic xhci-hcd
[Cts Eki 31 12:56:24 2015] usb usb2: SerialNumber: 0000:00:14.0
[Cts Eki 31 12:56:24 2015] hub 2-0:1.0: USB hub found
[Cts Eki 31 12:56:24 2015] hub 2-0:1.0: 4 ports detected
[Cts Eki 31 12:56:24 2015] usb: failed to peer usb2-port2 and usb1-port2 by location (usb2-port2:none) (usb1-port2:usb2-port1)
[Cts Eki 31 12:56:24 2015] usb usb2-port2: failed to peer to usb1-port2 (-16)
[Cts Eki 31 12:56:24 2015] usb: port power management may be unreliable
[Cts Eki 31 12:56:24 2015] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[Cts Eki 31 12:56:24 2015] ehci-pci: EHCI PCI platform driver
[Cts Eki 31 12:56:24 2015] ehci-pci 0000:00:1d.0: EHCI Host Controller
[Cts Eki 31 12:56:24 2015] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[Cts Eki 31 12:56:24 2015] ehci-pci 0000:00:1d.0: debug port 2
[Cts Eki 31 12:56:24 2015] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[Cts Eki 31 12:56:24 2015] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc361c000
[Cts Eki 31 12:56:24 2015] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[Cts Eki 31 12:56:24 2015] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[Cts Eki 31 12:56:24 2015] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Cts Eki 31 12:56:24 2015] usb usb3: Product: EHCI Host Controller
[Cts Eki 31 12:56:24 2015] usb usb3: Manufacturer: Linux 3.19.0-31-generic ehci_hcd
[Cts Eki 31 12:56:24 2015] usb usb3: SerialNumber: 0000:00:1d.0
[Cts Eki 31 12:56:24 2015] hub 3-0:1.0: USB hub found
[Cts Eki 31 12:56:24 2015] hub 3-0:1.0: 2 ports detected
[Cts Eki 31 12:56:24 2015] ehci-platform: EHCI generic platform driver
[Cts Eki 31 12:56:24 2015] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[Cts Eki 31 12:56:24 2015] ohci-pci: OHCI PCI platform driver
[Cts Eki 31 12:56:24 2015] ohci-platform: OHCI generic platform driver
[Cts Eki 31 12:56:24 2015] uhci_hcd: USB Universal Host Controller Interface driver
[Cts Eki 31 12:56:24 2015] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[Cts Eki 31 12:56:24 2015] serio: i8042 KBD port at 0x60,0x64 irq 1
[Cts Eki 31 12:56:24 2015] serio: i8042 AUX port at 0x60,0x64 irq 12
[Cts Eki 31 12:56:24 2015] mousedev: PS/2 mouse device common for all mice
[Cts Eki 31 12:56:24 2015] rtc_cmos 00:01: RTC can wake from S4
[Cts Eki 31 12:56:24 2015] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[Cts Eki 31 12:56:24 2015] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[Cts Eki 31 12:56:24 2015] i2c /dev entries driver
[Cts Eki 31 12:56:24 2015] device-mapper: uevent: version 1.0.3
[Cts Eki 31 12:56:24 2015] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[Cts Eki 31 12:56:24 2015] Intel P-state driver initializing.
[Cts Eki 31 12:56:24 2015] Consider also installing thermald for improved thermal control.
[Cts Eki 31 12:56:24 2015] ledtrig-cpu: registered to indicate activity on CPUs
[Cts Eki 31 12:56:24 2015] EFI Variables Facility v0.08 2004-May-17
[Cts Eki 31 12:56:24 2015] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[Cts Eki 31 12:56:24 2015] PCCT header not found.
[Cts Eki 31 12:56:24 2015] ACPI PCC probe failed.
[Cts Eki 31 12:56:24 2015] TCP: cubic registered
[Cts Eki 31 12:56:24 2015] NET: Registered protocol family 10
[Cts Eki 31 12:56:24 2015] NET: Registered protocol family 17
[Cts Eki 31 12:56:24 2015] Key type dns_resolver registered
[Cts Eki 31 12:56:24 2015] Loading compiled-in X.509 certificates
[Cts Eki 31 12:56:24 2015] Loaded X.509 cert 'Magrathea: Glacier signing key: 64743f490dd07d3934c763fc5fd31bd224b71520'
[Cts Eki 31 12:56:24 2015] registered taskstats version 1
[Cts Eki 31 12:56:24 2015] Key type trusted registered
[Cts Eki 31 12:56:24 2015] Key type encrypted registered
[Cts Eki 31 12:56:24 2015] AppArmor: AppArmor sha1 policy hashing enabled
[Cts Eki 31 12:56:24 2015] ima: No TPM chip found, activating TPM-bypass!
[Cts Eki 31 12:56:24 2015] evm: HMAC attrs: 0x1
[Cts Eki 31 12:56:24 2015]   Magic number: 3:518:937
[Cts Eki 31 12:56:24 2015] platform PNP0103:00: hash matches
[Cts Eki 31 12:56:24 2015] acpi PNP0103:00: hash matches
[Cts Eki 31 12:56:24 2015] rtc_cmos 00:01: setting system clock to 2015-10-31 12:56:25 UTC (1446296185)
[Cts Eki 31 12:56:24 2015] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[Cts Eki 31 12:56:24 2015] EDD information not available.
[Cts Eki 31 12:56:24 2015] PM: Hibernation image not present or could not be loaded.
[Cts Eki 31 12:56:24 2015] ACPI: Battery Slot [BAT0] (battery present)
[Cts Eki 31 12:56:24 2015] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
[Cts Eki 31 12:56:24 2015] Write protecting the kernel read-only data: 12288k
[Cts Eki 31 12:56:24 2015] Freeing unused kernel memory: 260K (ffff8800027bf000 - ffff880002800000)
[Cts Eki 31 12:56:24 2015] Freeing unused kernel memory: 340K (ffff880002bab000 - ffff880002c00000)
[Cts Eki 31 12:56:24 2015] systemd-udevd[121]: starting version 204
[Cts Eki 31 12:56:24 2015] sdhci: Secure Digital Host Controller Interface driver
[Cts Eki 31 12:56:24 2015] sdhci: Copyright(c) Pierre Ossman
[Cts Eki 31 12:56:24 2015] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[Cts Eki 31 12:56:24 2015] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[Cts Eki 31 12:56:24 2015] ahci 0000:00:1f.2: version 3.0
[Cts Eki 31 12:56:24 2015] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[Cts Eki 31 12:56:24 2015] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xffffc90010cde000, 68:f7:28:36:87:d1, XID 10900880 IRQ 45
[Cts Eki 31 12:56:24 2015] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[Cts Eki 31 12:56:24 2015] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[Cts Eki 31 12:56:24 2015] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part sxs deso sadm sds apst
[Cts Eki 31 12:56:24 2015] scsi host0: ahci
[Cts Eki 31 12:56:24 2015] scsi host1: ahci
[Cts Eki 31 12:56:24 2015] scsi host2: ahci
[Cts Eki 31 12:56:24 2015] scsi host3: ahci
[Cts Eki 31 12:56:24 2015] ata1: SATA max UDMA/133 abar m2048@0xc361b000 port 0xc361b100 irq 44
[Cts Eki 31 12:56:24 2015] ata2: SATA max UDMA/133 abar m2048@0xc361b000 port 0xc361b180 irq 44
[Cts Eki 31 12:56:24 2015] ata3: SATA max UDMA/133 abar m2048@0xc361b000 port 0xc361b200 irq 44
[Cts Eki 31 12:56:24 2015] ata4: SATA max UDMA/133 abar m2048@0xc361b000 port 0xc361b280 irq 44
[Cts Eki 31 12:56:25 2015] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[Cts Eki 31 12:56:25 2015] usb 3-1: new high-speed USB device number 2 using ehci-pci
[Cts Eki 31 12:56:25 2015] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[Cts Eki 31 12:56:25 2015] usb 3-1: New USB device found, idVendor=8087, idProduct=8000
[Cts Eki 31 12:56:25 2015] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Cts Eki 31 12:56:25 2015] hub 3-1:1.0: USB hub found
[Cts Eki 31 12:56:25 2015] hub 3-1:1.0: 8 ports detected
[Cts Eki 31 12:56:25 2015] usb 1-1: New USB device found, idVendor=0e8f, idProduct=00a5
[Cts Eki 31 12:56:25 2015] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[Cts Eki 31 12:56:25 2015] usb 1-1: Product: 2.4G RX
[Cts Eki 31 12:56:25 2015] usb 1-1: Manufacturer: DaKai
[Cts Eki 31 12:56:25 2015] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[Cts Eki 31 12:56:25 2015] usb 1-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[Cts Eki 31 12:56:25 2015] hidraw: raw HID events driver (C) Jiri Kosina
[Cts Eki 31 12:56:25 2015] ata1.00: ATA-9: ST1000LM014-SSHD-8GB, LVD4, max UDMA/133
[Cts Eki 31 12:56:25 2015] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[Cts Eki 31 12:56:25 2015] usbcore: registered new interface driver usbhid
[Cts Eki 31 12:56:25 2015] usbhid: USB HID core driver
[Cts Eki 31 12:56:25 2015] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:0E8F:00A5.0001/input/input6
[Cts Eki 31 12:56:25 2015] ata1.00: configured for UDMA/133
[Cts Eki 31 12:56:25 2015] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM014-SSHD LVD4 PQ: 0 ANSI: 5
[Cts Eki 31 12:56:25 2015] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[Cts Eki 31 12:56:25 2015] sd 0:0:0:0: [sda] 4096-byte physical blocks
[Cts Eki 31 12:56:25 2015] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Cts Eki 31 12:56:25 2015] sd 0:0:0:0: [sda] Write Protect is off
[Cts Eki 31 12:56:25 2015] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Cts Eki 31 12:56:25 2015] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Cts Eki 31 12:56:25 2015]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
[Cts Eki 31 12:56:25 2015] sd 0:0:0:0: [sda] Attached SCSI disk
[Cts Eki 31 12:56:25 2015] hid-generic 0003:0E8F:00A5.0001: input,hidraw0: USB HID v1.10 Keyboard [DaKai 2.4G RX] on usb-0000:00:14.0-1/input0
[Cts Eki 31 12:56:25 2015] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:0E8F:00A5.0002/input/input7
[Cts Eki 31 12:56:25 2015] hid-generic 0003:0E8F:00A5.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [DaKai 2.4G RX] on usb-0000:00:14.0-1/input1
[Cts Eki 31 12:56:25 2015] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[Cts Eki 31 12:56:25 2015] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x594f03)
[Cts Eki 31 12:56:25 2015] psmouse serio1: elantech: Synaptics capabilities query result 0x70, 0x15, 0x0a.
[Cts Eki 31 12:56:25 2015] usb 1-4: New USB device found, idVendor=0bda, idProduct=0129
[Cts Eki 31 12:56:25 2015] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[Cts Eki 31 12:56:25 2015] usb 1-4: Product: USB2.0-CRW
[Cts Eki 31 12:56:25 2015] usb 1-4: Manufacturer: Generic
[Cts Eki 31 12:56:25 2015] usb 1-4: SerialNumber: 20100201396000000
[Cts Eki 31 12:56:25 2015] usbcore: registered new interface driver rtsx_usb
[Cts Eki 31 12:56:25 2015] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[Cts Eki 31 12:56:25 2015] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Cts Eki 31 12:56:25 2015] ata2.00: ATAPI: TSSTcorp CDDVDW SU-228FB, LU01, max UDMA/100
[Cts Eki 31 12:56:25 2015] ata2.00: configured for UDMA/100
[Cts Eki 31 12:56:25 2015] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SU-228FB  LU01 PQ: 0 ANSI: 5
[Cts Eki 31 12:56:25 2015] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[Cts Eki 31 12:56:25 2015] cdrom: Uniform CD-ROM driver Revision: 3.20
[Cts Eki 31 12:56:25 2015] sr 1:0:0:0: Attached scsi CD-ROM sr0
[Cts Eki 31 12:56:25 2015] sr 1:0:0:0: Attached scsi generic sg1 type 5
[Cts Eki 31 12:56:25 2015] usb 1-6: new high-speed USB device number 4 using xhci_hcd
[Cts Eki 31 12:56:25 2015] usb 1-6: New USB device found, idVendor=174f, idProduct=14b2
[Cts Eki 31 12:56:25 2015] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[Cts Eki 31 12:56:25 2015] usb 1-6: Product: Lenovo EasyCamera
[Cts Eki 31 12:56:25 2015] usb 1-6: Manufacturer: Generic
[Cts Eki 31 12:56:25 2015] usb 1-6: SerialNumber: 200901010001
[Cts Eki 31 12:56:26 2015] ata3: SATA link down (SStatus 0 SControl 300)
[Cts Eki 31 12:56:26 2015] usb 1-7: new full-speed USB device number 5 using xhci_hcd
[Cts Eki 31 12:56:26 2015] usb 1-7: New USB device found, idVendor=8087, idProduct=07dc
[Cts Eki 31 12:56:26 2015] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Cts Eki 31 12:56:26 2015] ata4: SATA link down (SStatus 0 SControl 300)
[Cts Eki 31 12:56:26 2015] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[Cts Eki 31 12:56:27 2015] random: init urandom read with 93 bits of entropy available
[Cts Eki 31 12:56:28 2015] random: nonblocking pool is initialized
[Cts Eki 31 12:56:32 2015] Adding 9209852k swap on /dev/sda9.  Priority:-1 extents:1 across:9209852k FS
[Cts Eki 31 12:56:32 2015] systemd-udevd[317]: starting version 204
[Cts Eki 31 12:56:32 2015] lp: driver loaded but no devices found
[Cts Eki 31 12:56:32 2015] ppdev: user-space parallel port driver
[Cts Eki 31 12:56:32 2015] wmi: Mapper loaded
[Cts Eki 31 12:56:32 2015] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8
[Cts Eki 31 12:56:32 2015] [drm] Initialized drm 1.1.0 20060810
[Cts Eki 31 12:56:33 2015] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[Cts Eki 31 12:56:33 2015] r8169 0000:01:00.0 eth1: renamed from eth0
[Cts Eki 31 12:56:33 2015] [drm] Memory usable by graphics device = 2048M
[Cts Eki 31 12:56:33 2015] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[Cts Eki 31 12:56:33 2015] fb: switching to inteldrmfb from EFI VGA
[Cts Eki 31 12:56:33 2015] Console: switching to colour dummy device 80x25
[Cts Eki 31 12:56:33 2015] [drm] Replacing VGA console driver
[Cts Eki 31 12:56:33 2015] sound hdaudioC1D0: CX20751/2: BIOS auto-probing.
[Cts Eki 31 12:56:33 2015] sound hdaudioC1D0: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[Cts Eki 31 12:56:33 2015] sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[Cts Eki 31 12:56:33 2015] sound hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[Cts Eki 31 12:56:33 2015] sound hdaudioC1D0:    mono: mono_out=0x0
[Cts Eki 31 12:56:33 2015] sound hdaudioC1D0:    inputs:
[Cts Eki 31 12:56:33 2015] sound hdaudioC1D0:      Internal Mic=0x1a
[Cts Eki 31 12:56:33 2015] sound hdaudioC1D0:      Mic=0x19
[Cts Eki 31 12:56:33 2015] sound hdaudioC1D0: Enable sync_write for stable communication
[Cts Eki 31 12:56:33 2015] media: Linux media interface: v0.10
[Cts Eki 31 12:56:33 2015] Linux video capture interface: v2.00
[Cts Eki 31 12:56:33 2015] systemd-udevd[350]: renamed network interface eth0 to eth1
[Cts Eki 31 12:56:33 2015] Bluetooth: Core ver 2.20
[Cts Eki 31 12:56:33 2015] NET: Registered protocol family 31
[Cts Eki 31 12:56:33 2015] Bluetooth: HCI device and connection manager initialized
[Cts Eki 31 12:56:33 2015] Bluetooth: HCI socket layer initialized
[Cts Eki 31 12:56:33 2015] Bluetooth: L2CAP socket layer initialized
[Cts Eki 31 12:56:33 2015] Bluetooth: SCO socket layer initialized
[Cts Eki 31 12:56:33 2015] cfg80211: Calling CRDA to update world regulatory domain
[Cts Eki 31 12:56:33 2015] usbcore: registered new interface driver btusb
[Cts Eki 31 12:56:33 2015] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (174f:14b2)
[Cts Eki 31 12:56:33 2015] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input9
[Cts Eki 31 12:56:33 2015] usbcore: registered new interface driver uvcvideo
[Cts Eki 31 12:56:33 2015] USB Video Class driver (1.1.1)
[Cts Eki 31 12:56:33 2015] Bluetooth: hci0: read Intel version: 370710010002030d00
[Cts Eki 31 12:56:33 2015] Intel(R) Wireless WiFi driver for Linux, in-tree:
[Cts Eki 31 12:56:33 2015] Copyright(c) 2003- 2014 Intel Corporation
[Cts Eki 31 12:56:33 2015] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[Cts Eki 31 12:56:33 2015] [drm] Driver supports precise vblank timestamp query.
[Cts Eki 31 12:56:33 2015] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[Cts Eki 31 12:56:33 2015] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.2.3.d.bseq
[Cts Eki 31 12:56:33 2015] AVX2 version of gcm_enc/dec engaged.
[Cts Eki 31 12:56:33 2015] AES CTR mode by8 optimization enabled
[Cts Eki 31 12:56:33 2015] audit: type=1400 audit(1446285393.707:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=403 comm="apparmor_parser"
[Cts Eki 31 12:56:33 2015] audit: type=1400 audit(1446285393.707:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=403 comm="apparmor_parser"
[Cts Eki 31 12:56:33 2015] audit: type=1400 audit(1446285393.707:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=403 comm="apparmor_parser"
[Cts Eki 31 12:56:33 2015] audit: type=1400 audit(1446285393.707:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=403 comm="apparmor_parser"
[Cts Eki 31 12:56:33 2015] audit: type=1400 audit(1446285393.707:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=403 comm="apparmor_parser"
[Cts Eki 31 12:56:33 2015] audit: type=1400 audit(1446285393.707:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=403 comm="apparmor_parser"
[Cts Eki 31 12:56:33 2015] iwlwifi 0000:02:00.0: loaded firmware version 25.17.12.0 op_mode iwlmvm
[Cts Eki 31 12:56:33 2015] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
[Cts Eki 31 12:56:33 2015] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[Cts Eki 31 12:56:33 2015] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[Cts Eki 31 12:56:33 2015] kvm: disabled by bios
[Cts Eki 31 12:56:33 2015] intel_rapl: Found RAPL domain package
[Cts Eki 31 12:56:33 2015] intel_rapl: Found RAPL domain core
[Cts Eki 31 12:56:33 2015] intel_rapl: Found RAPL domain uncore
[Cts Eki 31 12:56:33 2015] intel_rapl: Found RAPL domain dram
[Cts Eki 31 12:56:33 2015] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[Cts Eki 31 12:56:33 2015] fbcon: inteldrmfb (fb0) is primary device
[Cts Eki 31 12:56:33 2015] Console: switching to colour frame buffer device 240x67
[Cts Eki 31 12:56:33 2015] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[Cts Eki 31 12:56:33 2015] i915 0000:00:02.0: registered panic notifier
[Cts Eki 31 12:56:33 2015] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[Cts Eki 31 12:56:33 2015] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[Cts Eki 31 12:56:33 2015] cfg80211: World regulatory domain updated:
[Cts Eki 31 12:56:33 2015] cfg80211:  DFS Master region: unset
[Cts Eki 31 12:56:33 2015] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[Cts Eki 31 12:56:33 2015] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[Cts Eki 31 12:56:33 2015] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[Cts Eki 31 12:56:33 2015] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[Cts Eki 31 12:56:33 2015] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[Cts Eki 31 12:56:33 2015] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[Cts Eki 31 12:56:33 2015] iwlwifi 0000:02:00.0 wlan1: renamed from wlan0
[Cts Eki 31 12:56:33 2015] systemd-udevd[344]: renamed network interface wlan0 to wlan1
[Cts Eki 31 12:56:33 2015] init: failsafe main process (630) killed by TERM signal
[Cts Eki 31 12:56:33 2015] audit: type=1400 audit(1446285394.107:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=706 comm="apparmor_parser"
[Cts Eki 31 12:56:33 2015] audit: type=1400 audit(1446285394.107:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=706 comm="apparmor_parser"
[Cts Eki 31 12:56:33 2015] audit: type=1400 audit(1446285394.107:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=706 comm="apparmor_parser"
[Cts Eki 31 12:56:33 2015] init: cups main process (729) killed by HUP signal
[Cts Eki 31 12:56:33 2015] init: cups main process ended, respawning
[Cts Eki 31 12:56:33 2015] audit: type=1400 audit(1446285394.159:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=773 comm="apparmor_parser"
[Cts Eki 31 12:56:33 2015] Bluetooth: RFCOMM TTY layer initialized
[Cts Eki 31 12:56:33 2015] Bluetooth: RFCOMM socket layer initialized
[Cts Eki 31 12:56:33 2015] Bluetooth: RFCOMM ver 1.11
[Cts Eki 31 12:56:33 2015] init: samba-ad-dc main process (696) terminated with status 1
[Cts Eki 31 12:56:33 2015] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Cts Eki 31 12:56:33 2015] Bluetooth: BNEP filters: protocol multicast
[Cts Eki 31 12:56:33 2015] Bluetooth: BNEP socket layer initialized
[Cts Eki 31 12:56:33 2015] r8169 0000:01:00.0 eth1: link down
[Cts Eki 31 12:56:33 2015] r8169 0000:01:00.0 eth1: link down
[Cts Eki 31 12:56:33 2015] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[Cts Eki 31 12:56:33 2015] init: Failed to spawn thermald main process: unable to execute: No such file or directory
[Cts Eki 31 12:56:34 2015] init: alsa-restore main process (927) terminated with status 19
[Cts Eki 31 12:56:35 2015] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[Cts Eki 31 12:56:35 2015] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[Cts Eki 31 12:56:35 2015] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
[Cts Eki 31 12:56:35 2015] ACPI Error: Method parse/execution failed [\_SB_.PCI0.RP05.PEGP.DD02._BCL] (Node ffff8802468f6000), AE_NOT_FOUND (20141107/psparse-536)
[Cts Eki 31 12:56:35 2015] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:31/LNXVIDEO:00/input/input10
[Cts Eki 31 12:56:35 2015] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[Cts Eki 31 12:56:35 2015] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[Cts Eki 31 12:56:35 2015] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13
[Cts Eki 31 12:56:35 2015] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[Cts Eki 31 12:56:35 2015] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[Cts Eki 31 12:56:35 2015] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
[Cts Eki 31 12:56:35 2015] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[Cts Eki 31 12:56:35 2015] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[Cts Eki 31 12:56:35 2015] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[Cts Eki 31 12:56:36 2015] r8169 0000:01:00.0 eth1: link up
[Cts Eki 31 12:56:36 2015] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[Cts Eki 31 12:56:37 2015] init: plymouth-upstart-bridge main process ended, respawning
[Cts Eki 31 12:56:37 2015] init: plymouth-upstart-bridge main process (1193) terminated with status 1
[Cts Eki 31 12:56:37 2015] init: plymouth-upstart-bridge main process ended, respawning
[Cts Eki 31 12:56:37 2015] bbswitch: module verification failed: signature and/or  required key missing - tainting kernel
[Cts Eki 31 12:56:37 2015] bbswitch: version 0.7
[Cts Eki 31 12:56:37 2015] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[Cts Eki 31 12:56:37 2015] bbswitch: Found discrete VGA device 0000:03:00.0: \_SB_.PCI0.RP05.PEGP
[Cts Eki 31 12:56:37 2015] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[Cts Eki 31 12:56:37 2015] bbswitch: detected an Optimus _DSM function
[Cts Eki 31 12:56:37 2015] pci 0000:03:00.0: enabling device (0006 -> 0007)
[Cts Eki 31 12:56:37 2015] bbswitch: Succesfully loaded. Discrete card 0000:03:00.0 is on
[Cts Eki 31 12:56:37 2015] bbswitch: disabling discrete graphics
[Cts Eki 31 12:56:37 2015] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[Cts Eki 31 12:57:03 2015] audit_printk_skb: 159 callbacks suppressed
[Cts Eki 31 12:57:03 2015] audit: type=1400 audit(1446285424.199:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2845 comm="apparmor_parser"
[Cts Eki 31 12:57:03 2015] audit: type=1400 audit(1446285424.199:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2845 comm="apparmor_parser"
[Cts Eki 31 12:57:03 2015] audit: type=1400 audit(1446285424.199:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2845 comm="apparmor_parser"
Normaller mi?
Önemli olan para değil, para ile ne yaptığındır, en iyi zenginlik ise gönül zenginliğidir. ;)

meda

#11
31 Ekim 2015 - 14:24:19
@Gh0st, sistem UEFI destekli mi ? Eğer UEFI desteği varsa Ubuntu'yu UEFI destekli şekilde kurmanız gerekir. BIOS ayarlarına bir bakın. Sonrasında Linux açık kaynak ekran kartı sürücüsünü kullanmanızı tavsiye ederim. Yoksa 5 yıldır herhangi bir Linux dağıtımı Windows 10'da dahil olmak üzere 3-5 saniye farkla dahi olsun hızlı açılır.
"BEDAVA Bedava yaşıyoruz, bedava;Hava bedava, bulut bedava;
Dere tepe bedava;Yağmur çamur bedava;Otomobillerin dışı,Sinemaların kapısı,Camekanlar bedava; Peynir ekmek değil ama Acı su bedava;Kelle fiyatına hürriyet, Esirlik bedava; Bedava yaşıyoruz, bedava. Orhan VELİ"

ata1

#12
31 Ekim 2015 - 18:23:56
sizden de alalım şu çıktıları
Kod Seç
systemd-analyze

Kod Seç
systemd-analyze blame

MuhbirKedi

#13
31 Ekim 2015 - 18:29:49
Alıntı yapılan: eral - 31 Ekim 2015 - 18:23:56
sizden de alalım şu çıktıları
Kod Seç
systemd-analyze

Kod Seç
systemd-analyze blame
Bende bunları yazınca komut bulunamadı diyor.
Önemli olan para değil, para ile ne yaptığındır, en iyi zenginlik ise gönül zenginliğidir. ;)

ata1

#14
31 Ekim 2015 - 18:32:02
acaba sürüm farkından  mı ben @neynefes'e sordum ve çalıştı dedi diğer konuda

betseg

#15
31 Ekim 2015 - 18:39:19
14.04'te systemd değil Upstart var, o yüzden çalışmaz :)

ata1

#16
31 Ekim 2015 - 18:40:25
bilgi için teşekkürler ben de öğrendim bu arada yani 15 .10 da systemd'e geçtiler . birde yuvarlansalar tam olacak  ;D

betseg

#17
31 Ekim 2015 - 18:47:53 Son düzenlenme: 31 Ekim 2015 - 18:53:43 betseg
Daha kararlı olsun diye yuvarlanmıyor. Bak Arch'a, GNOME 3.18 neler yapıyor. Yeni çekirdekler neler yapıyor.
Ayrıca Gentoo da yuvarlanıyor, ama systemd kullanmıyor.

ata1

#18
31 Ekim 2015 - 18:49:36
Alıntı yapılan: betseg - 31 Ekim 2015 - 18:47:53
Daha kararlı olsun diye. Bak Arch'a, GNOME 3.18 neler yapıyor. Yeni çekirdekler neler yapıyor.
teşekkürler ama gnome ve kde benden uzak dursun zaten hp dv6 yeterince belalı ne zaman çekirdek güncellense fare kafasına göre takılıyor taki defaut bıos diyene kadar

betseg

#19
31 Ekim 2015 - 18:52:06
İşte yuvarlanmanin sorunu bu. Kısa sürede her sistemde kararlılığı denenemediği için yuvarlananlar daha kararsız, sürümlü dağıtımlar daha kararlı.

ata1

#20
31 Ekim 2015 - 18:55:46
her güzelin bir kusuru var ama kusura bakma bu fare nedeni ile ubuntudan arch'a geçmiştim zaten demek ki o da fazla kararlı değilmiş

betseg

#21
31 Ekim 2015 - 18:56:57
Zaten bence Ubuntu kararlı değil. Debian Ubuntu'dan daha kararlı.

ata1

#22
31 Ekim 2015 - 18:59:19
en azından bıos sıfırlama arch da işe yarıyor fare normale dönüyor ve bu sorun 4.1.8 lts de yoktu sonrasın da  olan bir şey ben geri dönmeye çalışacağım zaten

Sarp34

#23
01 Kasım 2015 - 13:03:14
pei 34 programını çalıştırdınızmı? ilk başta windows kurun bir şekilde bilgisayarınıza pei 34 programını çalıştırınız ve uefi olarak yüklemeye çalışınız


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 01 Kasım 2015 - 13:03:47

ubuntuyu uefi olarak yüklemeye çalışınız
Küçük başlayım, büyük düşünün.
Yazdır
Yukarı git Sayfa1
Kullanıcı Eylemleri