Ubuntu 14.04 88E8057 kablolu internet sorunu

[halukunal]

Merhaba arkadaşlar,

Uzun zamandır ubuntu kullanmaktayım.Şuana kadar hep kablosuz ile kullandım hiç kablolu internete ihtiyacım olmamıştı. Ancak artık kablolu interneti de kullanmam gerekiyor.

Daha önceki bir konuda lspci çıktısında görüleceği üzere cihazımda 'Marvell Technology Group Ltd. 88E8057 PCI-E Gigabit Ethernet Controller' kartı var.
bkz: https://forum.ubuntu-tr.net/index.php?topic=32410.msg387937#msg387937

Şuan ubuntu 14.04 kullanmaktayım ve lspci çıktısında ne yazık ki kablolu internet ile ilgili bir şey göremiyorum. sk98lin sürücüsü kurayım dedim o da hata veriyor. Sorunu nasıl çözebilirim?

Kod Seç Genişlet

Create tmp dir (/tmp/Sk98IZjQdWkqAWOZMQCJoNNCQ)                      [   OK   ]
Check user id (0)                                                    [   OK   ]
Check kernel version (3.13.0-52-generic)                             [   OK   ]
Check kernel symbol file (/proc/kallsyms)                            [   OK   ]
Check kernel type (SMP)                                              [   OK   ]
Check number of CPUs (2)                                             [   OK   ]
Check architecture (found)                                           [   OK   ]
Set architecture (x86_64)                                            [   OK   ]
Check compiler (/usr/bin/gcc)                                        [   OK   ]
Check mcmodel flags (kernel)                                         [   OK   ]
Check module support (/sbin/insmod)                                  [   OK   ]
Check make (/usr/bin/make)                                           [   OK   ]
Check kernel gcc version (4.8.2) (Kernel:4.8.2 == gcc:4.8.2)         [   OK   ]
Check sk98lin driver availability (not loaded)                       [   OK   ]
Check kernel header files (/lib/modules/3.13.0-52-generic/build)     [   OK   ]
Check driver location (/lib/modules/3.13.0-52-generic/build/drivers/net/ethernet/marvell)                                                            [   OK   ]
Check sources for .config file (/lib/modules/3.13.0-52-generic/build/[   OK   ]
Copy and check .config file (done)                                   [   OK   ]
Check the mem address space (lowmem)                                 [   OK   ]
Change IOMMU (enabled)                                               [   OK   ]
Create new .config file (done)                                       [   OK   ]
Execute: make oldconfig (done)                                       [   OK   ]
Check modpost availability (available)                               [   OK   ]
Unpack the sources (done)                                            [   OK   ]
Check firmware availability (done)                                   [   OK   ]
Execute: make prepare (done)                                         [   OK   ]
Check kernel header versiongrep: /lib/modules/3.13.0-52-generic/build/include/linux/version.h: No such file or directory
./functions: line 1117: [: !=: unary operator expected
grep: /lib/modules/3.13.0-52-generic/build/include/linux/version.h: No such file or directory
./functions: line 1126: [: !=: unary operator expected
(Kernel:3.13.0 == Header:)                                          [   OK   ]
Check kernel functions (Changed: nothing)                            [   OK   ]
Compile the kernel (error)                                           [ failed ]

An error has occurred during the compile proces which prevented
the installation from completing.                             
Take a look at the log file install.log for more informations. 
Installation of package failed.


Konu açarken aktarılması gereken çıktılar

Kod Seç Genişlet

cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=14.04
DISTRIB_CODENAME=trusty
DISTRIB_DESCRIPTION="Ubuntu 14.04.2 LTS"


Kod Seç Genişlet

uname -a
Linux root-plusplus 3.13.0-52-generic #86-Ubuntu SMP Mon May 4 04:32:59 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux


Kod Seç Genişlet

lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV730/M96 [Mobility Radeon HD 4650/5165]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series]
02:00.0 Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)


Kod Seç Genişlet

lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 006 Device 003: ID 045e:078c Microsoft Corp.
Bus 006 Device 002: ID 04cc:1122 ST-Ericsson Hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


Kod Seç Genişlet

rfkill list
0: samsung-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no


Kod Seç Genişlet

sudo lshw -C network
  *-network               
       description: Wireless interface
       product: AR242x / AR542x Wireless Network Adapter (PCI-Express)
       vendor: Qualcomm Atheros
       physical id: 0
       bus info: pci@0000:02:00.0
       logical name: wlan0
       version: 01
       serial: 00:25:56:71:5d:1a
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=ath5k driverversion=3.13.0-52-generic firmware=N/A ip=192.168.1.62 latency=0 link=yes multicast=yes wireless=IEEE 802.11bg
       resources: irq:16 memory:f6000000-f600ffff


Kod Seç Genişlet

ifconfig
lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:3103 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3103 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:331574 (331.5 KB)  TX bytes:331574 (331.5 KB)

wlan0     Link encap:Ethernet  HWaddr 00:25:56:71:5d:1a 
          inet addr:192.168.1.62  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::225:56ff:fe71:5d1a/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:31205 errors:0 dropped:0 overruns:0 frame:0
          TX packets:28569 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:30436907 (30.4 MB)  TX bytes:4911849 (4.9 MB)



Kod Seç Genişlet

lo        no wireless extensions.

wlan0     IEEE 802.11bg  ESSID:"h" 
          Mode:Managed  Frequency:2.437 GHz  Access Point: 00:1A:2A:B2:A1:BB   
          Bit Rate=1 Mb/s   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=44/70  Signal level=-66 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:10   Missed beacon:0


Kod Seç Genişlet

iwlist scanning
lo        Interface doesn't support scanning.

wlan0     Scan completed :
          Cell 01 - Address: 00:1A:2A:B2:A1:BB
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=44/70  Signal level=-66 dBm 
                    Encryption key:on
                    ESSID:"h"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
                              36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000227f23cb26
                    Extra: Last beacon: 14124ms ago
                    IE: Unknown: 000168
                    IE: Unknown: 010582848B962C
                    IE: Unknown: 030106
                    IE: Unknown: 2A0104
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32080C1218243048606C
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK


Kod Seç Genişlet

lsmod
Module                  Size  Used by
ctr                    13049  1
ccm                    17773  1
rfcomm                 69160  0
bnep                   19624  2
bluetooth             391136  10 bnep,rfcomm
sch_ingress            12866  1
cls_u32                17137  4
sch_sfq                21416  0
sch_cbq                26435  1
snd_hda_codec_hdmi     46368  1
snd_hda_codec_realtek    65580  1
snd_hda_intel          56531  10
snd_hda_codec         192906  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
binfmt_misc            17468  1
arc4                   12608  2
snd_hwdep              13602  1 snd_hda_codec
snd_pcm               102099  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
snd_seq_midi           13324  0
radeon               1522664  4
snd_seq_midi_event     14899  1 snd_seq_midi
ath5k                 149924  0
snd_rawmidi            30144  1 snd_seq_midi
ath                    28698  1 ath5k
mac80211              630669  1 ath5k
ttm                    93424  1 radeon
cfg80211              484040  3 ath,ath5k,mac80211
drm_kms_helper         55071  1 radeon
snd_seq                61560  2 snd_seq_midi_event,snd_seq_midi
drm                   303102  6 ttm,drm_kms_helper,radeon
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
samsung_laptop         14486  0
snd_timer              29482  2 snd_pcm,snd_seq
coretemp               13435  0
snd                    69322  31 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
i2c_algo_bit           13413  1 radeon
lpc_ich                21080  0
serio_raw              13462  0
soundcore              12680  1 snd
video                  19476  1 samsung_laptop
shpchp                 37032  0
mac_hid                13205  0
parport_pc             32701  0
ppdev                  17671  0
lp                     17759  0
parport                42348  3 lp,ppdev,parport_pc
hid_logitech_dj        18581  0
hid_generic            12548  0
usbhid                 52659  0
hid                   106148  4 hid_generic,usbhid,hid_logitech_dj
psmouse               106714  0
ahci                   29915  2
libahci                32716  1 ahci


Kod Seç Genişlet

dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-52-generic (buildd@comet) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #86-Ubuntu SMP Mon May 4 04:32:59 UTC 2015 (Ubuntu 3.13.0-52.86-generic 3.13.11-ckt18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-52-generic root=UUID=42928464-f3e0-43d7-976d-56b13652a522 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdaa0fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bdaa1000-0x00000000bdaa6fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bdaa7000-0x00000000bdbbcfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bdbbd000-0x00000000bdc0efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bdc0f000-0x00000000bdd07fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bdd08000-0x00000000bdf0efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bdf0f000-0x00000000bdf18fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bdf19000-0x00000000bdf1efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bdf1f000-0x00000000bdf64fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bdf65000-0x00000000bdf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bdf9f000-0x00000000bdffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. R520/R522/R620               /R520/R522/R620               , BIOS 07LL.M027.20100105.Jay 01/05/20
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   1 base 000000000 mask F00000000 write-back
[    0.000000]   2 base 100000000 mask FC0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 3GB, range: 1GB, type UC
[    0.000000] reg 1, base: 0GB, range: 4GB, type WB
[    0.000000] reg 2, base: 4GB, range: 1GB, type WB
[    0.000000] total RAM covered: 4096M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 64K num_reg: 3  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 4GB, range: 1GB, type WB
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbdf65 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f72b0-0x000f72bf] mapped at [ffff8800000f72b0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[    0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[    0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[    0.000000]  [mem 0x13fe00000-0x13fffffff] page 2M
[    0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[    0.000000]  [mem 0x13c000000-0x13fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[    0.000000]  [mem 0x100000000-0x13bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbdaa0fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xbd9fffff] page 2M
[    0.000000]  [mem 0xbda00000-0xbdaa0fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbdaa7000-0xbdbbcfff]
[    0.000000]  [mem 0xbdaa7000-0xbdbbcfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbdc0f000-0xbdd07fff]
[    0.000000]  [mem 0xbdc0f000-0xbdd07fff] page 4k
[    0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbdf0f000-0xbdf18fff]
[    0.000000]  [mem 0xbdf0f000-0xbdf18fff] page 4k
[    0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbdf1f000-0xbdf64fff]
[    0.000000]  [mem 0xbdf1f000-0xbdf64fff] page 4k
[    0.000000] RAMDISK: [mem 0x35b4a000-0x36d9cfff]
[    0.000000] ACPI: RSDP 00000000000f7210 000024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 00000000bdff82a5 00006C (v01 SECCSD LH43STAR 06040000  LTP 00000000)
[    0.000000] ACPI: FACP 00000000bdfe8000 0000F4 (v03 INTEL  CRESTLNE 06040000 ALAN 00000001)
[    0.000000] ACPI: DSDT 00000000bdfe9000 0068E5 (v02 Intel  CANTIGA  06040000 INTL 20050624)
[    0.000000] ACPI: FACS 00000000bdf9efc0 000040
[    0.000000] ACPI: HPET 00000000bdffed86 000038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: MCFG 00000000bdffedbe 00003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: APIC 00000000bdffedfa 000068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 00000000bdffee62 000028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SLIC 00000000bdffee8a 000176 (v01 SECCSD LH43STAR 06040000  LTP 00000000)
[    0.000000] ACPI: SSDT 00000000bdfe7000 0005F9 (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 00000000bdfe6000 000259 (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 00000000bdfe5000 00020F (v01  PmRef    ApTst 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[    0.000000]   NODE_DATA [mem 0x13fff8000-0x13fffcfff]
[    0.000000]  [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x13fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0xbdaa0fff]
[    0.000000]   node   0: [mem 0xbdaa7000-0xbdbbcfff]
[    0.000000]   node   0: [mem 0xbdc0f000-0xbdd07fff]
[    0.000000]   node   0: [mem 0xbdf0f000-0xbdf18fff]
[    0.000000]   node   0: [mem 0xbdf1f000-0xbdf64fff]
[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
[    0.000000] On node 0 totalpages: 1039517
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12084 pages used for memmap
[    0.000000]   DMA32 zone: 773376 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[    0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdaa1000-0xbdaa6fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdbbd000-0xbdc0efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdd08000-0xbdf0efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdf19000-0xbdf1efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdf65000-0xbdf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdf9f000-0xbdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe000000-0xffffffff]
[    0.000000] e820: [mem 0xbe000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s81536 r8192 d20864 u1048576
[    0.000000] pcpu-alloc: s81536 r8192 d20864 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1023252
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-52-generic root=UUID=42928464-f3e0-43d7-976d-56b13652a522 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3990844K/4158068K available (7389K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 167224K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000] Offload RCU callbacks from all CPUs
[    0.000000] Offload RCU callbacks from CPUs: 0-1.
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2194.021 MHz processor
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.04 BogoMIPS (lpj=8776084)
[    0.004008] pid_max: default: 32768 minimum: 301
[    0.004048] Security Framework initialized
[    0.004072] AppArmor: AppArmor initialized
[    0.004074] Yama: becoming mindful.
[    0.004499] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.006660] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.008873] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.008887] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.009200] Initializing cgroup subsys memory
[    0.009210] Initializing cgroup subsys devices
[    0.009213] Initializing cgroup subsys freezer
[    0.009215] Initializing cgroup subsys blkio
[    0.009217] Initializing cgroup subsys perf_event
[    0.009220] Initializing cgroup subsys hugetlb
[    0.009250] CPU: Physical Processor ID: 0
[    0.009252] CPU: Processor Core ID: 0
[    0.009254] mce: CPU supports 6 MCE banks
[    0.009263] CPU0: Thermal monitoring enabled (TM2)
[    0.009272] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.009272] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[    0.009272] tlb_flushall_shift: -1
[    0.009390] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[    0.011100] ACPI: Core revision 20131115
[    0.014969] ACPI: All ACPI Tables successfully acquired
[    0.016011] ftrace: allocating 28576 entries in 112 pages
[    0.028539] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.069604] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T6600  @ 2.20GHz (fam: 06, model: 17, stepping: 0a)
[    0.072000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.072000] ... version:                2
[    0.072000] ... bit width:              40
[    0.072000] ... generic registers:      2
[    0.072000] ... value mask:             000000ffffffffff
[    0.072000] ... max period:             000000007fffffff
[    0.072000] ... fixed-purpose events:   3
[    0.072000] ... event mask:             0000000700000003
[    0.072000] x86: Booting SMP configuration:
[    0.072000] .... node  #0, CPUs:      #1
[    0.083348] x86: Booted up 1 node, 2 CPUs
[    0.083353] smpboot: Total of 2 processors activated (8776.08 BogoMIPS)
[    0.083443] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.084140] devtmpfs: initialized
[    0.085365] EVM: security.selinux
[    0.085367] EVM: security.SMACK64
[    0.085368] EVM: security.ima
[    0.085370] EVM: security.capability
[    0.088029] PM: Registering ACPI NVS region [mem 0xbdf65000-0xbdf9efff] (237568 bytes)
[    0.089171] pinctrl core: initialized pinctrl subsystem
[    0.089251] regulator-dummy: no parameters
[    0.089287] RTC time:  5:55:47, date: 05/18/15
[    0.089329] NET: Registered protocol family 16
[    0.089466] cpuidle: using governor ladder
[    0.089468] cpuidle: using governor menu
[    0.089513] ACPI: bus type PCI registered
[    0.089516] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.089593] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.089596] PCI: not using MMCONFIG
[    0.089598] PCI: Using configuration type 1 for base access
[    0.089598] bio: create slab <bio-0> at 0
[    0.089598] ACPI: Added _OSI(Module Device)
[    0.089598] ACPI: Added _OSI(Processor Device)
[    0.089598] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.089598] ACPI: Added _OSI(Processor Aggregator Device)
[    0.092126] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.094914] ACPI: SSDT 00000000bdf1aca0 000223 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.095194] ACPI: Dynamic OEM Table Load:
[    0.095198] ACPI: SSDT           (null) 000223 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.095362] ACPI: SSDT 00000000bdf19020 000C78 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.095626] ACPI: Dynamic OEM Table Load:
[    0.095629] ACPI: SSDT           (null) 000C78 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.104222] ACPI: SSDT 00000000bdf1aa20 0001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.104515] ACPI: Dynamic OEM Table Load:
[    0.104518] ACPI: SSDT           (null) 0001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
[    0.108067] ACPI: SSDT 00000000bdf1af20 00008D (v01  PmRef    ApCst 00003000 INTL 20050624)
[    0.108342] ACPI: Dynamic OEM Table Load:
[    0.108345] ACPI: SSDT           (null) 00008D (v01  PmRef    ApCst 00003000 INTL 20050624)
[    0.112050] ACPI: Interpreter enabled
[    0.112058] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.112063] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.112078] ACPI: (supports S0 S3 S4 S5)
[    0.112080] ACPI: Using IOAPIC for interrupt routing
[    0.112100] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.112791] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.136706] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.136835] ACPI: No dock devices found.
[    0.137172] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.137185] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.144273] ACPI: Power Resource [FN00] (off)
[    0.144375] ACPI: Power Resource [FN01] (off)
[    0.144945] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.144952] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.144958] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.144958] PCI host bridge to bus 0000:00
[    0.144958] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.144958] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.144958] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.144958] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.144958] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.144958] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.144958] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[    0.144958] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    0.144958] DMAR: Forcing write-buffer flush capability
[    0.144958] DMAR: Disabling IOMMU for graphics on this chipset
[    0.144958] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[    0.144958] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.144958] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.144958] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.144958] pci 0000:00:1a.0: reg 0x20: [io  0x1800-0x181f]
[    0.144958] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.144958] pci 0000:00:1a.1: reg 0x20: [io  0x1820-0x183f]
[    0.144958] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.144958] pci 0000:00:1a.2: reg 0x20: [io  0x1840-0x185f]
[    0.144958] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.144958] pci 0000:00:1a.7: reg 0x10: [mem 0xfc204800-0xfc204bff]
[    0.145073] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.145172] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.145195] pci 0000:00:1b.0: reg 0x10: [mem 0xfc200000-0xfc203fff 64bit]
[    0.145302] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.145356] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.145396] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.145508] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.145564] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.145607] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[    0.145718] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.145774] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.145815] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[    0.145927] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.145984] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.146030] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.146092] pci 0000:00:1d.0: reg 0x20: [io  0x1860-0x187f]
[    0.146221] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.146283] pci 0000:00:1d.1: reg 0x20: [io  0x1880-0x189f]
[    0.146409] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.146471] pci 0000:00:1d.2: reg 0x20: [io  0x18a0-0x18bf]
[    0.146612] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.146640] pci 0000:00:1d.7: reg 0x10: [mem 0xfc204c00-0xfc204fff]
[    0.146761] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.146851] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.146973] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.147015] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[    0.147238] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[    0.147268] pci 0000:00:1f.2: reg 0x10: [io  0x18f0-0x18f7]
[    0.147281] pci 0000:00:1f.2: reg 0x14: [io  0x18e4-0x18e7]
[    0.147293] pci 0000:00:1f.2: reg 0x18: [io  0x18e8-0x18ef]
[    0.147306] pci 0000:00:1f.2: reg 0x1c: [io  0x18e0-0x18e3]
[    0.147318] pci 0000:00:1f.2: reg 0x20: [io  0x18c0-0x18df]
[    0.147330] pci 0000:00:1f.2: reg 0x24: [mem 0xfc204000-0xfc2047ff]
[    0.147406] pci 0000:00:1f.2: PME# supported from D3hot
[    0.147491] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.147514] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
[    0.147546] pci 0000:00:1f.3: reg 0x20: [io  0x1c00-0x1c1f]
[    0.147705] pci 0000:01:00.0: [1002:9480] type 00 class 0x030000
[    0.147722] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[    0.147734] pci 0000:01:00.0: reg 0x14: [io  0x2000-0x20ff]
[    0.147746] pci 0000:01:00.0: reg 0x18: [mem 0xcfef0000-0xcfefffff]
[    0.147788] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.147841] pci 0000:01:00.0: supports D1 D2
[    0.147901] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
[    0.147918] pci 0000:01:00.1: reg 0x10: [mem 0xcfeec000-0xcfeeffff]
[    0.148029] pci 0000:01:00.1: supports D1 D2
[    0.156015] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.156019] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.156023] pci 0000:00:01.0:   bridge window [mem 0xcfe00000-0xcfefffff]
[    0.156027] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.156148] pci 0000:02:00.0: [168c:001c] type 00 class 0x020000
[    0.156181] pci 0000:02:00.0: reg 0x10: [mem 0xf6000000-0xf600ffff 64bit]
[    0.156379] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.156411] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.156423] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.156429] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.156434] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.156442] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.156538] acpiphp: Slot [1] registered
[    0.156546] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[    0.156551] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.156556] pci 0000:00:1c.2:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.156564] pci 0000:00:1c.2:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.156646] pci 0000:00:1c.3: PCI bridge to [bus 06-07]
[    0.156651] pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
[    0.156657] pci 0000:00:1c.3:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.156665] pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.156763] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
[    0.156777] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.156780] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.156782] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.156785] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.156787] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.156789] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[    0.160375] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[    0.160432] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[    0.160486] ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
[    0.160544] ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
[    0.160597] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
[    0.160652] ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
[    0.160706] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[    0.160759] ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
[    0.160240] ACPI: Enabled 9 GPEs in block 00 to 3F
[    0.160247] ACPI: \_SB_.PCI0: notify handler is installed
[    0.160293] Found 1 acpi root devices
[    0.160344] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.160352] ACPI : EC: 0 stale EC events cleared
[    0.160794] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.160794] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.160794] vgaarb: loaded
[    0.160794] vgaarb: bridge control possible 0000:01:00.0
[    0.160794] SCSI subsystem initialized
[    0.160794] libata version 3.00 loaded.
[    0.160794] ACPI: bus type USB registered
[    0.160794] usbcore: registered new interface driver usbfs
[    0.160794] usbcore: registered new interface driver hub
[    0.160794] usbcore: registered new device driver usb
[    0.160794] PCI: Using ACPI for IRQ routing
[    0.173457] PCI: pci_cache_line_size set to 64 bytes
[    0.173528] e820: reserve RAM buffer [mem 0x0009e400-0x0009ffff]
[    0.173530] e820: reserve RAM buffer [mem 0xbdaa1000-0xbfffffff]
[    0.173532] e820: reserve RAM buffer [mem 0xbdbbd000-0xbfffffff]
[    0.173534] e820: reserve RAM buffer [mem 0xbdd08000-0xbfffffff]
[    0.173536] e820: reserve RAM buffer [mem 0xbdf19000-0xbfffffff]
[    0.173538] e820: reserve RAM buffer [mem 0xbdf65000-0xbfffffff]
[    0.173644] NetLabel: Initializing
[    0.173646] NetLabel:  domain hash size = 128
[    0.173647] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.173664] NetLabel:  unlabeled traffic allowed by default
[    0.173680] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.173680] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.173680] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.174076] Switched to clocksource hpet
[    0.179403] AppArmor: AppArmor Filesystem Enabled
[    0.179446] pnp: PnP ACPI init
[    0.179465] ACPI: bus type PNP registered
[    0.179727] pnp 00:00: [dma 4]
[    0.179766] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.179798] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.179930] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.179935] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.179980] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.180026] pnp 00:04: disabling [io  0x5000-0x500f] because it overlaps 0000:00:1c.3 BAR 13 [io  0x5000-0x5fff]
[    0.180061] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.180064] system 00:04: [io  0x0480-0x048f] has been reserved
[    0.180067] system 00:04: [io  0xffff] has been reserved
[    0.180069] system 00:04: [io  0xffff] has been reserved
[    0.180072] system 00:04: [io  0x0400-0x047f] could not be reserved
[    0.180075] system 00:04: [io  0x0480-0x048f] has been reserved
[    0.180077] system 00:04: [io  0x1180-0x11ff] has been reserved
[    0.180080] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.180083] system 00:04: [io  0xfe00] has been reserved
[    0.180086] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.180143] system 00:05: [io  0x06a0-0x06af] has been reserved
[    0.180145] system 00:05: [io  0x06b0-0x06ff] has been reserved
[    0.180149] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.180181] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.180219] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.180251] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.180506] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.180509] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.180512] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.180514] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.180517] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.180520] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.180522] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.180528] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.180531] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.180818] pnp: PnP ACPI: found 10 devices
[    0.180820] ACPI: bus type PNP unregistered
[    0.187721] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff 64bit]
[    0.187736] pci 0000:01:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
[    0.187739] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.187742] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.187746] pci 0000:00:01.0:   bridge window [mem 0xcfe00000-0xcfefffff]
[    0.187750] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.187755] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.187759] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.187765] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.187770] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.187778] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[    0.187781] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.187788] pci 0000:00:1c.2:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.187793] pci 0000:00:1c.2:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.187801] pci 0000:00:1c.3: PCI bridge to [bus 06-07]
[    0.187805] pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
[    0.187811] pci 0000:00:1c.3:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.187816] pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.187825] pci 0000:00:1e.0: PCI bridge to [bus 08]
[    0.187840] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.187843] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.187845] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.187848] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.187850] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.187852] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[    0.187855] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.187857] pci_bus 0000:01: resource 1 [mem 0xcfe00000-0xcfefffff]
[    0.187860] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.187862] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.187865] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
[    0.187867] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.187870] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.187872] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
[    0.187874] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.187877] pci_bus 0000:06: resource 0 [io  0x5000-0x5fff]
[    0.187879] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff]
[    0.187881] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.187884] pci_bus 0000:08: resource 4 [io  0x0000-0x0cf7]
[    0.187886] pci_bus 0000:08: resource 5 [io  0x0d00-0xffff]
[    0.187889] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[    0.187891] pci_bus 0000:08: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.187893] pci_bus 0000:08: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.187896] pci_bus 0000:08: resource 9 [mem 0xc0000000-0xfebfffff]
[    0.187932] NET: Registered protocol family 2
[    0.188172] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.188325] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.188531] TCP: Hash tables configured (established 32768 bind 32768)
[    0.188583] TCP: reno registered
[    0.188593] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.188625] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.188700] NET: Registered protocol family 1
[    0.189855] pci 0000:01:00.0: Video device with shadowed ROM
[    0.189865] PCI: CLS 64 bytes, default 64
[    0.189945] Trying to unpack rootfs image as initramfs...
[    0.566979] Freeing initrd memory: 18764K (ffff880035b4a000 - ffff880036d9d000)
[    0.566990] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.566993] software IO TLB [mem 0xb9aa1000-0xbdaa1000] (64MB) mapped at [ffff8800b9aa1000-ffff8800bdaa0fff]
[    0.567100] Simple Boot Flag at 0x37 set to 0x1
[    0.567264] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[    0.567271] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[    0.567344] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.567346] Scanning for low memory corruption every 60 seconds
[    0.567605] Initialise system trusted keyring
[    0.567660] audit: initializing netlink socket (disabled)
[    0.567676] type=2000 audit(1431928547.564:1): initialized
[    0.601317] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.602742] zbud: loaded
[    0.602898] VFS: Disk quotas dquot_6.5.2
[    0.602944] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.603457] fuse init (API version 7.22)
[    0.603545] msgmni has been set to 7831
[    0.603608] Key type big_key registered
[    0.604057] Key type asymmetric registered
[    0.604059] Asymmetric key parser 'x509' registered
[    0.604096] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.604129] io scheduler noop registered
[    0.604131] io scheduler deadline registered (default)
[    0.604160] io scheduler cfq registered
[    0.604373] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.604506] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.604661] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.604816] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    0.604908] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.604924] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.604975] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    0.604976] vesafb: scrolling: redraw
[    0.604979] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.605695] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 5120k, total 5120k
[    0.685072] Console: switching to colour frame buffer device 160x64
[    0.764369] fb0: VESA VGA frame buffer device
[    0.764397] intel_idle: does not run on family 6 model 23
[    0.764405] ipmi message handler version 39.2
[    0.764608] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.764822] ACPI: AC Adapter [ADP1] (on-line)
[    0.764916] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.765049] ACPI: Lid Switch [LID0]
[    0.765091] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.765096] ACPI: Power Button [PWRB]
[    0.765132] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.765135] ACPI: Sleep Button [SLPB]
[    0.765209] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.765211] ACPI: Power Button [PWRF]
[    0.765276] ACPI: Fan [FAN0] (off)
[    0.765311] ACPI: Fan [FAN1] (off)
[    0.766529] Monitor-Mwait will be used to enter C-1 state
[    0.766534] Monitor-Mwait will be used to enter C-2 state
[    0.766537] tsc: Marking TSC unstable due to TSC halts in idle
[    0.766542] ACPI: acpi_idle registered with cpuidle
[    0.767713] thermal LNXTHERM:00: registered as thermal_zone0
[    0.767715] ACPI: Thermal Zone [TZ00] (35 C)
[    0.768391] thermal LNXTHERM:01: registered as thermal_zone1
[    0.768396] ACPI: Thermal Zone [TZ01] (35 C)
[    0.768444] GHES: HEST is not enabled!
[    0.768662] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.768671] ACPI: Battery Slot [BAT1] (battery absent)
[    0.768673] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.770562] Linux agpgart interface v0.103
[    0.772285] brd: module loaded
[    0.773147] loop: module loaded
[    0.773576] libphy: Fixed MDIO Bus: probed
[    0.773680] tun: Universal TUN/TAP device driver, 1.6
[    0.773681] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.773731] PPP generic driver version 2.4.2
[    0.773789] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.773794] ehci-pci: EHCI PCI platform driver
[    0.773923] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.773933] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.773950] ehci-pci 0000:00:1a.7: debug port 1
[    0.777871] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    0.777900] ehci-pci 0000:00:1a.7: irq 19, io mem 0xfc204800
[    0.788034] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.788112] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.788117] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.788122] usb usb1: Product: EHCI Host Controller
[    0.788126] usb usb1: Manufacturer: Linux 3.13.0-52-generic ehci_hcd
[    0.788130] usb usb1: SerialNumber: 0000:00:1a.7
[    0.788284] hub 1-0:1.0: USB hub found
[    0.788293] hub 1-0:1.0: 6 ports detected
[    0.788570] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.788576] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.788590] ehci-pci 0000:00:1d.7: debug port 1
[    0.792486] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.792509] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfc204c00
[    0.804042] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.804113] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.804121] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.804126] usb usb2: Product: EHCI Host Controller
[    0.804130] usb usb2: Manufacturer: Linux 3.13.0-52-generic ehci_hcd
[    0.804134] usb usb2: SerialNumber: 0000:00:1d.7
[    0.804284] hub 2-0:1.0: USB hub found
[    0.804293] hub 2-0:1.0: 6 ports detected
[    0.804509] ehci-platform: EHCI generic platform driver
[    0.804521] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.804524] ohci-pci: OHCI PCI platform driver
[    0.804537] ohci-platform: OHCI generic platform driver
[    0.804547] uhci_hcd: USB Universal Host Controller Interface driver
[    0.804651] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.804657] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.804704] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[    0.804762] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.804767] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.804769] usb usb3: Product: UHCI Host Controller
[    0.804771] usb usb3: Manufacturer: Linux 3.13.0-52-generic uhci_hcd
[    0.804774] usb usb3: SerialNumber: 0000:00:1a.0
[    0.804876] hub 3-0:1.0: USB hub found
[    0.804884] hub 3-0:1.0: 2 ports detected
[    0.805052] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.805060] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.805107] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[    0.805159] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.805161] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.805164] usb usb4: Product: UHCI Host Controller
[    0.805166] usb usb4: Manufacturer: Linux 3.13.0-52-generic uhci_hcd
[    0.805168] usb usb4: SerialNumber: 0000:00:1a.1
[    0.805278] hub 4-0:1.0: USB hub found
[    0.805285] hub 4-0:1.0: 2 ports detected
[    0.805457] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.805463] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.805492] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
[    0.805541] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.805544] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.805546] usb usb5: Product: UHCI Host Controller
[    0.805548] usb usb5: Manufacturer: Linux 3.13.0-52-generic uhci_hcd
[    0.805550] usb usb5: SerialNumber: 0000:00:1a.2
[    0.805654] hub 5-0:1.0: USB hub found
[    0.805661] hub 5-0:1.0: 2 ports detected
[    0.805827] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.805833] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.805863] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[    0.805910] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.805913] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.805915] usb usb6: Product: UHCI Host Controller
[    0.805918] usb usb6: Manufacturer: Linux 3.13.0-52-generic uhci_hcd
[    0.805920] usb usb6: SerialNumber: 0000:00:1d.0
[    0.806024] hub 6-0:1.0: USB hub found
[    0.806034] hub 6-0:1.0: 2 ports detected
[    0.806200] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.806209] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.806237] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[    0.806284] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.806286] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.806289] usb usb7: Product: UHCI Host Controller
[    0.806291] usb usb7: Manufacturer: Linux 3.13.0-52-generic uhci_hcd
[    0.806293] usb usb7: SerialNumber: 0000:00:1d.1
[    0.806396] hub 7-0:1.0: USB hub found
[    0.806403] hub 7-0:1.0: 2 ports detected
[    0.806572] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.806580] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.806618] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[    0.806664] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.806667] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.806669] usb usb8: Product: UHCI Host Controller
[    0.806672] usb usb8: Manufacturer: Linux 3.13.0-52-generic uhci_hcd
[    0.806674] usb usb8: SerialNumber: 0000:00:1d.2
[    0.806777] hub 8-0:1.0: USB hub found
[    0.806784] hub 8-0:1.0: 2 ports detected
[    0.806940] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.808793] i8042: Detected active multiplexing controller, rev 1.1
[    0.809873] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.809879] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.809903] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.809926] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.809949] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.810090] mousedev: PS/2 mouse device common for all mice
[    0.810500] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.810532] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.810608] device-mapper: uevent: version 1.0.3
[    0.810693] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.810700] ledtrig-cpu: registered to indicate activity on CPUs
[    0.810819] TCP: cubic registered
[    0.810920] NET: Registered protocol family 10
[    0.811124] NET: Registered protocol family 17
[    0.811136] Key type dns_resolver registered
[    0.811399] Loading compiled-in X.509 certificates
[    0.812604] Loaded X.509 cert 'Magrathea: Glacier signing key: 1981bc916ffc00599231ec5630e666e0256fd6f1'
[    0.812619] registered taskstats version 1
[    0.815144] Key type trusted registered
[    0.819158] Key type encrypted registered
[    0.819162] AppArmor: AppArmor sha1 policy hashing enabled
[    0.819165] IMA: No TPM chip found, activating TPM-bypass!
[    0.819521] regulator-dummy: disabling
[    0.819574]   Magic number: 15:763:921
[    0.819721] rtc_cmos 00:06: setting system clock to 2015-05-18 05:55:48 UTC (1431928548)
[    0.820254] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.820256] EDD information not available.
[    0.820301] PM: Hibernation image not present or could not be loaded.
[    0.822031] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    0.822033] Write protecting the kernel read-only data: 12288k
[    0.824836] Freeing unused kernel memory: 792K (ffff88000173a000 - ffff880001800000)
[    0.827165] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
[    0.834752] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.840994] systemd-udevd[98]: starting version 204
[    0.939430] ahci 0000:00:1f.2: version 3.0
[    0.939585] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    0.939638] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.939674] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    0.939677] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[    0.960701] scsi0 : ahci
[    0.960795] scsi1 : ahci
[    0.960863] scsi2 : ahci
[    0.960929] scsi3 : ahci
[    0.963037] scsi4 : ahci
[    0.965535] scsi5 : ahci
[    0.965626] ata1: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204100 irq 44
[    0.965631] ata2: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204180 irq 44
[    0.965633] ata3: DUMMY
[    0.965635] ata4: DUMMY
[    0.965638] ata5: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204300 irq 44
[    0.965642] ata6: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204380 irq 44
[    1.284056] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.291354] ata1.00: ATA-8: SAMSUNG HM320JI, 2SS00_01, max UDMA7
[    1.291360] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.298742] ata1.00: configured for UDMA/133
[    1.298931] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM320JI  2SS0 PQ: 0 ANSI: 5
[    1.299081] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.299128] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.299142] sd 0:0:0:0: [sda] Write Protect is off
[    1.299145] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.299172] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.396988]  sda: sda1 sda2 < sda5 > sda3
[    1.397437] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.504059] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[    1.616059] ata2: SATA link down (SStatus 0 SControl 300)
[    1.646919] usb 6-1: New USB device found, idVendor=04cc, idProduct=1122
[    1.646922] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.649959] hub 6-1:1.0: USB hub found
[    1.651920] hub 6-1:1.0: 5 ports detected
[    1.933919] usb 6-1.1: new low-speed USB device number 3 using uhci_hcd
[    1.936064] ata5: SATA link down (SStatus 0 SControl 300)
[    2.072918] usb 6-1.1: New USB device found, idVendor=045e, idProduct=078c
[    2.072929] usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.072933] usb 6-1.1: Product: USB Keyboard
[    2.072937] usb 6-1.1: Manufacturer: LITEON Technology
[    2.095757] hidraw: raw HID events driver (C) Jiri Kosina
[    2.113277] usbcore: registered new interface driver usbhid
[    2.113280] usbhid: USB HID core driver
[    2.115438] input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/input/input13
[    2.115524] hid-generic 0003:045E:078C.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:00:1d.0-1.1/input0
[    2.169923] usb 6-1.4: new full-speed USB device number 4 using uhci_hcd
[    2.256047] ata6: SATA link down (SStatus 0 SControl 300)
[    2.286712] random: nonblocking pool is initialized
[    2.299921] usb 6-1.4: New USB device found, idVendor=046d, idProduct=c52b
[    2.299931] usb 6-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.299935] usb 6-1.4: Product: USB Receiver
[    2.299939] usb 6-1.4: Manufacturer: Logitech
[    2.322173] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input2
[    2.326342] input: Logitech Unifying Device. Wireless PID:4013 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.4/6-1.4:1.2/0003:046D:C52B.0004/input/input14
[    2.326464] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4013] on usb-0000:00:1d.0-1.4:1
[    3.172460] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    3.172464] EXT4-fs (sda1): write access will be enabled during recovery
[    8.908464] EXT4-fs (sda1): orphan cleanup on readonly fs
[    8.908732] EXT4-fs (sda1): 13 orphan inodes deleted
[    8.908734] EXT4-fs (sda1): recovery complete
[    9.227847] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   12.281265] init: plymouth-upstart-bridge main process (164) terminated with status 1
[   12.281280] init: plymouth-upstart-bridge main process ended, respawning
[   12.283867] init: plymouth-upstart-bridge main process (175) terminated with status 1
[   12.283881] init: plymouth-upstart-bridge main process ended, respawning
[   12.286378] init: plymouth-upstart-bridge main process (176) terminated with status 1
[   12.286392] init: plymouth-upstart-bridge main process ended, respawning
[   12.288850] init: plymouth-upstart-bridge main process (177) terminated with status 1
[   12.288864] init: plymouth-upstart-bridge main process ended, respawning
[   12.291311] init: plymouth-upstart-bridge main process (178) terminated with status 1
[   12.291325] init: plymouth-upstart-bridge main process ended, respawning
[   12.293776] init: plymouth-upstart-bridge main process (179) terminated with status 1
[   12.293790] init: plymouth-upstart-bridge main process ended, respawning
[   12.296226] init: plymouth-upstart-bridge main process (180) terminated with status 1
[   12.296240] init: plymouth-upstart-bridge main process ended, respawning
[   12.298739] init: plymouth-upstart-bridge main process (181) terminated with status 1
[   12.298753] init: plymouth-upstart-bridge main process ended, respawning
[   12.301266] init: plymouth-upstart-bridge main process (182) terminated with status 1
[   12.301280] init: plymouth-upstart-bridge main process ended, respawning
[   12.303722] init: plymouth-upstart-bridge main process (183) terminated with status 1
[   12.303736] init: plymouth-upstart-bridge main process ended, respawning
[   12.306301] init: plymouth-upstart-bridge main process (184) terminated with status 1
[   12.306315] init: plymouth-upstart-bridge respawning too fast, stopped
[   32.335640] Adding 5425148k swap on /dev/sda5.  Priority:-1 extents:1 across:5425148k FS
[   33.281900] systemd-udevd[285]: starting version 204
[   33.874619] lp: driver loaded but no devices found
[   33.941425] ppdev: user-space parallel port driver
[   37.055967] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   37.405609] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   37.406493] ACPI: Video Device [NVID] (multi-head: yes  rom: no  post: no)
[   37.406510] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   37.407063] acpi device:03: registered as cooling_device4
[   37.407137] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input15
[   37.892923] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   37.892932] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   37.892936] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   37.892940] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   37.892942] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   37.892945] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   37.892947] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   38.426840] samsung_laptop: detected SABI interface: SwSmi@
[   38.426842] samsung_laptop: Backlight controlled by ACPI video driver
[   38.647226] [drm] Initialized drm 1.1.0 20060810
[   38.751479] cfg80211: Calling CRDA to update world regulatory domain
[   39.225951] ath5k 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   39.226082] ath5k 0000:02:00.0: registered as 'phy0'
[   39.638561] [drm] radeon kernel modesetting enabled.
[   39.638637] checking generic (d0000000 500000) vs hw (d0000000 10000000)
[   39.638639] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[   39.638688] Console: switching to colour dummy device 80x25
[   39.640031] [drm] initializing kernel modesetting (RV730 0x1002:0x9480 0x144D:0xC050).
[   39.640132] [drm] register mmio base: 0xCFEF0000
[   39.640134] [drm] register mmio size: 65536
[   39.640240] ATOM BIOS: Samsung_Bonn_EXT_M96M2_DDR3
[   39.640297] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   39.640300] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[   39.640302] [drm] Detected VRAM RAM=1024M, BAR=256M
[   39.640303] [drm] RAM width 128bits DDR
[   39.640529] [TTM] Zone  kernel: Available graphics memory: 2006228 kiB
[   39.640531] [TTM] Initializing pool allocator
[   39.640537] [TTM] Initializing DMA pool allocator
[   39.640563] [drm] radeon: 1024M of VRAM memory ready
[   39.640565] [drm] radeon: 1024M of GTT memory ready.
[   39.640580] [drm] Loading RV730 Microcode
[   39.777437] ath: EEPROM regdomain: 0x68
[   39.777440] ath: EEPROM indicates we should expect a direct regpair map
[   39.777443] ath: Country alpha2 being used: 00
[   39.777444] ath: Regpair used: 0x68
[   39.877947] cfg80211: World regulatory domain updated:
[   39.877951] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   39.877954] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.877956] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.877958] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   39.877960] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.877962] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   40.085437] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   40.085687] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   40.564901] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   40.614369] SKU: Nid=0x1d sku_cfg=0x40168a1d
[   40.614373] SKU: port_connectivity=0x1
[   40.614374] SKU: enable_pcbeep=0x1
[   40.614375] SKU: check_sum=0x00000006
[   40.614377] SKU: customization=0x0000008a
[   40.614378] SKU: external_amp=0x3
[   40.614379] SKU: platform_type=0x1
[   40.614381] SKU: swap=0x0
[   40.614382] SKU: override=0x1
[   40.614583] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   40.614585]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   40.614587]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   40.614588]    mono: mono_out=0x0
[   40.614589]    inputs:
[   40.614591]      Internal Mic=0x19
[   40.614593]      Mic=0x18
[   40.614594] realtek: No valid SSID, checking pincfg 0x40168a1d for NID 0x1d
[   40.614596] realtek: Enabling init ASM_ID=0x8a1d CODEC_ID=10ec0272
[   40.621352] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   40.621453] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   40.662994] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   40.684966] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[   40.685034] radeon 0000:01:00.0: WB enabled
[   40.685038] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880135bf6c00
[   40.685041] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880135bf6c0c
[   40.685995] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc9001089c598
[   40.685997] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   40.685999] [drm] Driver supports precise vblank timestamp query.
[   40.686001] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[   40.686032] radeon 0000:01:00.0: irq 46 for MSI/MSI-X
[   40.686051] radeon 0000:01:00.0: radeon: using MSI.
[   40.686085] [drm] radeon: irq initialized.
[   40.732561] [drm] ring test on 0 succeeded in 0 usecs
[   40.732570] [drm] ring test on 3 succeeded in 3 usecs
[   40.917182] [drm] ring test on 5 succeeded in 1 usecs
[   40.917189] [drm] UVD initialized successfully.
[   40.917623] [drm] Enabling audio 0 support
[   40.917649] [drm] ib test on ring 0 succeeded in 0 usecs
[   40.917668] [drm] ib test on ring 3 succeeded in 0 usecs
[   41.067049] [drm] ib test on ring 5 succeeded
[   41.067762] [drm] Radeon Display Connectors
[   41.067764] [drm] Connector 0:
[   41.067766] [drm]   VGA-1
[   41.067768] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   41.067769] [drm]   Encoders:
[   41.067771] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   41.067772] [drm] Connector 1:
[   41.067774] [drm]   HDMI-A-1
[   41.067775] [drm]   HPD1
[   41.067777] [drm]   DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac
[   41.067778] [drm]   Encoders:
[   41.067779] [drm]     DFP1: INTERNAL_UNIPHY
[   41.074885] [drm] radeon: dpm initialized
[   41.104097] type=1400 audit(1431928588.781:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=396 comm="apparmor_parser"
[   41.104104] type=1400 audit(1431928588.781:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=396 comm="apparmor_parser"
[   41.104110] type=1400 audit(1431928588.781:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=396 comm="apparmor_parser"
[   41.104591] type=1400 audit(1431928588.781:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=396 comm="apparmor_parser"
[   41.104597] type=1400 audit(1431928588.781:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=396 comm="apparmor_parser"
[   41.104848] type=1400 audit(1431928588.781:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=396 comm="apparmor_parser"
[   41.112807] [drm] fb mappable at 0xD045E000
[   41.112809] [drm] vram apper at 0xD0000000
[   41.112810] [drm] size 5242880
[   41.112812] [drm] fb depth is 24
[   41.112813] [drm]    pitch is 5120
[   41.112962] fbcon: radeondrmfb (fb0) is primary device
[   41.114468] Console: switching to colour frame buffer device 160x64
[   41.118221] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   41.118223] radeon 0000:01:00.0: registered panic notifier
[   41.118242] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[   41.118348] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   41.118350] hda-intel 0000:01:00.1: Using LPIB position fix
[   41.118404] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
[   41.121397] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[   41.263429] HDMI ATI/AMD: no speaker allocation for ELD
[   41.263505] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[   42.432160] init: failsafe main process (552) killed by TERM signal
[   43.912270] u32 classifier
[   43.912274]     Actions configured
[   45.696754] init: avahi-daemon main process (680) terminated with status 127
[   45.696769] init: avahi-daemon main process ended, respawning
[   45.975995] init: avahi-cups-reload main process (686) terminated with status 1
[   46.791034] type=1400 audit(1431928594.465:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=689 comm="apparmor_parser"
[   46.791044] type=1400 audit(1431928594.465:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=689 comm="apparmor_parser"
[   46.791525] type=1400 audit(1431928594.465:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=689 comm="apparmor_parser"
[   47.545498] Bluetooth: Core ver 2.17
[   47.545535] NET: Registered protocol family 31
[   47.545537] Bluetooth: HCI device and connection manager initialized
[   47.545556] Bluetooth: HCI socket layer initialized
[   47.545559] Bluetooth: L2CAP socket layer initialized
[   47.545564] Bluetooth: SCO socket layer initialized
[   47.801577] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   47.801581] Bluetooth: BNEP filters: protocol multicast
[   47.801593] Bluetooth: BNEP socket layer initialized
[   48.385605] Bluetooth: RFCOMM TTY layer initialized
[   48.385620] Bluetooth: RFCOMM socket layer initialized
[   48.385627] Bluetooth: RFCOMM ver 1.11
[   51.790865] type=1400 audit(1431928599.465:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=785 comm="apparmor_parser"
[   51.790876] type=1400 audit(1431928599.465:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=785 comm="apparmor_parser"
[   51.790882] type=1400 audit(1431928599.465:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=785 comm="apparmor_parser"
[   51.791367] type=1400 audit(1431928599.465:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=785 comm="apparmor_parser"
[   51.791373] type=1400 audit(1431928599.465:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=785 comm="apparmor_parser"
[   51.791626] type=1400 audit(1431928599.465:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=785 comm="apparmor_parser"
[   52.363657] type=1400 audit(1431928600.037:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=784 comm="apparmor_parser"
[   52.363666] type=1400 audit(1431928600.037:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=784 comm="apparmor_parser"
[   52.363962] type=1400 audit(1431928600.037:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=784 comm="apparmor_parser"
[   52.645747] type=1400 audit(1431928600.321:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=792 comm="apparmor_parser"
[   52.645758] type=1400 audit(1431928600.321:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=792 comm="apparmor_parser"
[   52.645763] type=1400 audit(1431928600.321:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="pxgsettings" pid=792 comm="apparmor_parser"
[   52.645768] type=1400 audit(1431928600.321:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=792 comm="apparmor_parser"
[   52.645774] type=1400 audit(1431928600.321:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=792 comm="apparmor_parser"
[   52.646900] type=1400 audit(1431928600.321:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=792 comm="apparmor_parser"
[   52.652039] type=1400 audit(1431928600.329:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="pxgsettings" pid=792 comm="apparmor_parser"
[   53.995961] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   53.996381] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   54.305008] init: samba-ad-dc main process (710) terminated with status 1
[   56.258491] wlan0: authenticate with 00:02:61:99:72:f4
[   56.258714] wlan0: send auth to 00:02:61:99:72:f4 (try 1/3)
[   56.260243] wlan0: authenticated
[   56.264039] wlan0: associate with 00:02:61:99:72:f4 (try 1/3)
[   56.267074] wlan0: RX AssocResp from 00:02:61:99:72:f4 (capab=0x431 status=0 aid=1)
[   56.267296] wlan0: associated
[   56.267328] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   56.267372] cfg80211: Calling CRDA for country: NA
[   56.994738] init: softether main process (1228) terminated with status 127
[   56.994753] init: softether main process ended, respawning
[   59.059281] init: winbind main process (1894) terminated with status 1
[   59.059297] init: winbind main process ended, respawning
[   59.136264] init: winbind main process (1933) terminated with status 1
[   59.136280] init: winbind main process ended, respawning
[   59.190256] init: winbind main process (1939) terminated with status 1
[   59.190273] init: winbind main process ended, respawning
[   59.290910] init: winbind main process (1945) terminated with status 1
[   59.290928] init: winbind main process ended, respawning
[   59.496137] init: winbind main process (1952) terminated with status 1
[   59.496155] init: winbind main process ended, respawning
[   59.570004] init: winbind main process (1958) terminated with status 1
[   59.570020] init: winbind main process ended, respawning
[   59.711652] init: winbind main process (1964) terminated with status 1
[   59.711669] init: winbind main process ended, respawning
[   59.776944] init: winbind main process (1975) terminated with status 1
[   59.776960] init: winbind main process ended, respawning
[   59.835566] init: winbind main process (1982) terminated with status 1
[   59.835583] init: winbind main process ended, respawning
[   59.878880] init: winbind main process (1988) terminated with status 1
[   59.878897] init: winbind main process ended, respawning
[   59.945843] init: winbind main process (1994) terminated with status 1
[   59.945859] init: winbind respawning too fast, stopped
[  735.106526] wlan0: deauthenticating from 00:02:61:99:72:f4 by local choice (reason=3)
[  735.113923] cfg80211: Calling CRDA to update world regulatory domain
[  735.118089] cfg80211: World regulatory domain updated:
[  735.118093] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  735.118095] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  735.118098] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  735.118100] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  735.118102] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  735.118104] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  739.125682] init: network-manager main process (725) killed by KILL signal
[  740.153273] wlan0: authenticate with 00:1a:2a:b2:a1:bb
[  740.161034] wlan0: send auth to 00:1a:2a:b2:a1:bb (try 1/3)
[  740.162579] wlan0: authenticated
[  740.162737] ath5k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[  740.162742] ath5k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  740.168045] wlan0: associate with 00:1a:2a:b2:a1:bb (try 1/3)
[  740.170660] wlan0: RX AssocResp from 00:1a:2a:b2:a1:bb (capab=0x451 status=0 aid=3)
[  740.170998] wlan0: associated
[  740.177742] wlan0: deauthenticating from 00:1a:2a:b2:a1:bb by local choice (reason=2)
[  740.177979] cfg80211: Calling CRDA to update world regulatory domain
[  740.178547] wlan0: authenticate with 00:1a:2a:b2:a1:bb
[  740.178784] wlan0: send auth to 00:1a:2a:b2:a1:bb (try 1/3)
[  740.192574] cfg80211: World regulatory domain updated:
[  740.192580] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  740.192584] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  740.192588] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  740.192592] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  740.192595] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  740.192599] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  741.176251] wlan0: send auth to 00:1a:2a:b2:a1:bb (try 2/3)
[  741.177669] wlan0: authenticated
[  741.177854] ath5k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[  741.177860] ath5k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  741.180051] wlan0: associate with 00:1a:2a:b2:a1:bb (try 1/3)
[  741.219595] wlan0: RX AssocResp from 00:1a:2a:b2:a1:bb (capab=0x451 status=0 aid=3)
[  741.219941] wlan0: associated
[  741.495152] perf samples too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[  818.531535] wlan0: deauthenticating from 00:1a:2a:b2:a1:bb by local choice (reason=3)
[  818.532069] cfg80211: Calling CRDA to update world regulatory domain
[  818.538826] cfg80211: World regulatory domain updated:
[  818.538834] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  818.538838] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  818.538842] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  818.538846] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  818.538849] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  818.538853] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  823.549834] init: network-manager main process (14543) killed by KILL signal
[  824.588478] wlan0: authenticate with 00:02:61:99:72:f4
[  824.596676] wlan0: send auth to 00:02:61:99:72:f4 (try 1/3)
[  824.599794] wlan0: authenticated
[  824.600289] wlan0: associate with 00:02:61:99:72:f4 (try 1/3)
[  824.604903] wlan0: RX AssocResp from 00:02:61:99:72:f4 (capab=0x431 status=0 aid=1)
[  824.605194] wlan0: associated
[  824.605268] cfg80211: Calling CRDA for country: NA
[ 1020.074260] wlan0: deauthenticating from 00:02:61:99:72:f4 by local choice (reason=3)
[ 1020.075954] cfg80211: Calling CRDA to update world regulatory domain
[ 1020.083010] cfg80211: World regulatory domain updated:
[ 1020.083016] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1020.083018] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1020.083020] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1020.083022] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1020.083024] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1020.083026] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1032.749368] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1034.384566] wlan0: authenticate with 00:1a:2a:b2:a1:bb
[ 1034.393095] wlan0: send auth to 00:1a:2a:b2:a1:bb (try 1/3)
[ 1034.394771] wlan0: authenticated
[ 1034.395330] ath5k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 1034.395337] ath5k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 1034.396063] wlan0: associate with 00:1a:2a:b2:a1:bb (try 1/3)
[ 1034.398784] wlan0: RX AssocResp from 00:1a:2a:b2:a1:bb (capab=0x451 status=0 aid=3)
[ 1034.399064] wlan0: associated
[ 1034.399094] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1034.405991] wlan0: deauthenticating from 00:1a:2a:b2:a1:bb by local choice (reason=2)
[ 1034.406201] wlan0: authenticate with 00:1a:2a:b2:a1:bb
[ 1034.406407] wlan0: send auth to 00:1a:2a:b2:a1:bb (try 1/3)
[ 1034.406681] cfg80211: Calling CRDA to update world regulatory domain
[ 1034.409641] wlan0: authenticated
[ 1034.409843] ath5k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 1034.409848] ath5k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 1034.410600] cfg80211: World regulatory domain updated:
[ 1034.410606] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1034.410609] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1034.410612] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1034.410615] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1034.410618] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1034.410620] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1034.412130] wlan0: associate with 00:1a:2a:b2:a1:bb (try 1/3)
[ 1034.428939] wlan0: RX AssocResp from 00:1a:2a:b2:a1:bb (capab=0x451 status=0 aid=3)
[ 1034.429216] wlan0: associated
[ 1362.601503] ata1: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe frozen
[ 1362.601511] ata1: irq_stat 0x00400040, connection status changed
[ 1362.601516] ata1: SError: { HostInt PHYRdyChg 10B8B DevExch }
[ 1362.601523] ata1: hard resetting link
[ 1363.324059] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1363.338728] ata1.00: configured for UDMA/133
[ 1363.352047] ata1: EH complete
[ 1606.878376] audit_printk_skb: 108 callbacks suppressed
[ 1606.878381] type=1400 audit(1431930154.036:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=26099 comm="apparmor_parser"
[ 1606.878389] type=1400 audit(1431930154.036:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=26099 comm="apparmor_parser"
[ 1606.878878] type=1400 audit(1431930154.036:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=26099 comm="apparmor_parser"
[ 1818.412663] systemd-hostnamed[27578]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 2541.712653] systemd-hostnamed[30225]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 3376.909448] systemd-hostnamed[4339]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!

Kod Seç Genişlet

dmesg | tail
[ 1363.324059] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1363.338728] ata1.00: configured for UDMA/133
[ 1363.352047] ata1: EH complete
[ 1606.878376] audit_printk_skb: 108 callbacks suppressed
[ 1606.878381] type=1400 audit(1431930154.036:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=26099 comm="apparmor_parser"
[ 1606.878389] type=1400 audit(1431930154.036:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=26099 comm="apparmor_parser"
[ 1606.878878] type=1400 audit(1431930154.036:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=26099 comm="apparmor_parser"
[ 1818.412663] systemd-hostnamed[27578]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 2541.712653] systemd-hostnamed[30225]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 3376.909448] systemd-hostnamed[4339]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!


[if]

@halukunal, bu aygıt sk98lin sürücüsünü kurmadan önce görünüyor muydu? Ne zaman görünmez oldu? sk98lin sürücüsünün bu aygıta ait olduğunu nereden öğrendiniz?

[halukunal]

@halukunal, bu aygıt sk98lin sürücüsünü kurmadan önce görünüyor muydu? Ne zaman görünmez oldu? sk98lin sürücüsünün bu aygıta ait olduğunu nereden öğrendiniz?

Kablolu internet kullanmam gerekti ancak kabloyu taktığımda çalışmadığını görünce sorun ne diye bakarken aygıtı bilgisayarın görmediğini farkettim ve çözüm arayışına girdim. Ne zaman görünmez olduğu hakkında fikir sahibi değilim. Bilgisayarı hep kablosuz internetle kullanıyorum. Daha önceden hiç kablolu internet ihtiyacım olmadığı için gözüküp gözükmediğine hiç bakmadım. 2012 yılında açtığım konuda görüküyormuş.  http://ubuntuforums.org/showthread.php?t=885882 bu konuda o sürücüyü yüklemeyi tavsiye etmişler * tabi ki çok eski bir konu ben de denedim ancak kurulum başarısız oldu.

[if]

Tamam, şimdi oldu.
Marvel bu kart için bir sürücü sağlıyormuş. Sanırım siz onu indirdiniz. Ben Marvel'ın sürücü indirme sayfasından "Port Number" kısmına 88E8057 yazıp Kernel 2.6.x olanı seçtim.

Sizin dermele işlemi için önce

Kod Seç Genişlet

sudo apt-get install linux-headers-(uname -r) kurulumunu yapmanız gerek.

[halukunal]

evet verdiğim konu üzerinden marvelin sitesine gittim ve sürücüyü indirdim.

headers zaten kurulu.

Kod Seç Genişlet

sudo apt-get install linux-headers-3.13.0-52-generic
Reading package lists... Done
Building dependency tree       
Reading state information... Done
linux-headers-3.13.0-52-generic is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 45 not upgraded.


ayrıca verdiğiniz kodun direkt olarak çalışması için ( işaretinin önüne $ işareti konulması gerekiyor.

[heartsmagic]

Kod Seç Genişlet

ls -l /lib/modules/3.13.0-52-generic/build/include/linux/version.h
ne diyor?

[halukunal]

Kod Seç Genişlet

ls -l /lib/modules/3.13.0-52-generic/build/include/linux/version.h
lrwxrwxrwx 1 root root 79 May 18 16:56 /lib/modules/3.13.0-52-generic/build/include/linux/version.h -> /usr/src/linux-headers-3.13.0-52-generic/include/generated/uapi/linux/version.h


version.h sorununu http://askubuntu.com/a/391035 burdaki 2. kod ile çözdüm ancak yine kernel hatası veriyor.

Kod Seç Genişlet

Create tmp dir (/tmp/Sk98IdAqDFUafMNTQlJcHLrJb)                                                                              [   OK   ]
Check user id (0)                                                                                                            [   OK   ]
Check kernel version (3.13.0-52-generic)                                                                                     [   OK   ]
Check kernel symbol file (/proc/kallsyms)                                                                                    [   OK   ]
Check kernel type (SMP)                                                                                                      [   OK   ]
Check number of CPUs (2)                                                                                                     [   OK   ]
Check architecture (found)                                                                                                   [   OK   ]
Set architecture (x86_64)                                                                                                    [   OK   ]
Check compiler (/usr/bin/gcc)                                                                                                [   OK   ]
Check mcmodel flags (kernel)                                                                                                 [   OK   ]
Check module support (/sbin/insmod)                                                                                          [   OK   ]
Check make (/usr/bin/make)                                                                                                   [   OK   ]
Check kernel gcc version (4.8.2) (Kernel:4.8.2 == gcc:4.8.2)                                                                 [   OK   ]
Check sk98lin driver availability (not loaded)                                                                               [   OK   ]
Check kernel header files (/lib/modules/3.13.0-52-generic/build)                                                             [   OK   ]
Check driver location (/lib/modules/3.13.0-52-generic/build/drivers/net/ethernet/marvell)                                    [   OK   ]
Check sources for .config file (/lib/modules/3.13.0-52-generic/build/.config)                                                [   OK   ]
Copy and check .config file (done)                                                                                           [   OK   ]
Check the mem address space (lowmem)                                                                                         [   OK   ]
Change IOMMU (enabled)                                                                                                       [   OK   ]
Create new .config file (done)                                                                                               [   OK   ]
Execute: make oldconfig (done)                                                                                               [   OK   ]
Check modpost availability (available)                                                                                       [   OK   ]
Unpack the sources (done)                                                                                                    [   OK   ]
Check firmware availability (done)                                                                                           [   OK   ]
Check kernel header version (not recognized)                                                                                 [  warn  ]
Check kernel functions (Changed: nothing)                                                                                    [   OK   ]
Compile the kernel (error)                                                                                                   [ failed ]

An error has occurred during the compile proces which prevented
the installation from completing.                             
Take a look at the log file install.log for more informations. 
Installation of package failed.


bu da install.log

Kod Seç Genişlet

+++ Install mode: User
+++ Driver version: 10.93.3.3 (Aug-22-2012)
+++ Kernel version 3.13.0-52-generic
+++ smp_count=1
+++ cpu_number=2
+++ kernel_machine=x86_64
+++ Architecture: x86_64
+++ modpost available
+++ Unpack the sources
+++ ====================================
+++ tar xfv sk98lin.tar
2.6/
2.6/sky2.c
2.6/skethtool.c
2.6/skproc.c
2.6/Makefile
2.6/skge.c
2.6/h/
2.6/h/skdrv1st.h
2.6/h/skdrv2nd.h
2.6/skdim.c
common/
common/skaddr.c
common/fwos.c
common/skgeinit.c
common/skgehwt.c
common/skspi.c
common/sk98lin.htm
common/fwapp.c
common/sktimer.c
common/fwhci.c
common/fwptrn.c
common/flashfun.c
common/fwfunctions.c
common/skgemib.c
common/vpdcheck.c
common/skvpd.c
common/skpflash.c
common/sky2le.c
common/fwimage.c
common/fwoids.c
common/skgesirq.c
common/sk98lin.4
common/fwmain.c
common/sktwsi.c
common/skgepnmi.c
common/sklm80.c
common/skgespilole.c
common/skxmac2.c
common/sk98lin.txt
common/h/
common/h/sktimer.h
common/h/fwimage.h
common/h/sktypes.h
common/h/fwptrn.h
common/h/skdebug.h
common/h/skaddr.h
common/h/skversion.h
common/h/skgeasfapi.h
common/h/lm80.h
common/h/skvpd.h
common/h/skgetwsi.h
common/h/skgeinit.h
common/h/skgesirq.h
common/h/skpflash.h
common/h/skqueue.h
common/h/fwoids.h
common/h/skcsum.h
common/h/skgepnm2.h
common/h/skspi.h
common/h/fwapp.h
common/h/skpcidevid.h
common/h/fwos.h
common/h/mvyexhw.h
common/h/sktwsi.h
common/h/fwmain.h
common/h/xmac_ii.h
common/h/fwhci.h
common/h/skgehw.h
common/h/skgedrv.h
common/h/sky2le.h
common/h/skgepnmi.h
common/h/flash.h
common/h/fwcommon.h
common/h/skgehwt.h
common/h/skerror.h
common/skqueue.c
common/skgeasfapi.c
common/skcsum.c
misc/
misc/Kconfig
misc/Configure.help

+++ Compile the driver
+++ ====================================
make: Entering directory `/usr/src/linux-headers-3.13.0-52-generic'
make -C /lib/modules/3.13.0-52-generic/build \
KBUILD_SRC=/usr/src/linux-headers-3.13.0-52-generic \
KBUILD_EXTMOD="/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all" -f /usr/src/linux-headers-3.13.0-52-generic/Makefile \

test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \
echo >&2; \
echo >&2 "  ERROR: Kernel configuration is invalid."; \
echo >&2 "         include/generated/autoconf.h or include/config/auto.conf are missing.";\
echo >&2 "         Run 'make oldconfig && make prepare' on kernel src to fix it."; \
echo >&2 ; \
/bin/false)
mkdir -p /tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/.tmp_versions ; rm -f /tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/.tmp_versions/*
make -f /usr/src/linux-headers-3.13.0-52-generic/scripts/Makefile.build obj=/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all
   rm -f /tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/built-in.o; ar rcsD /tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/built-in.o
  cc -Wp,-MD,/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/.skge.o.d  -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/4.8/include -I/usr/src/linux-headers-lbm- -I/usr/src/linux-headers-3.13.0-52-generic/arch/x86/include -Iarch/x86/include/generated  -I/usr/src/linux-headers-3.13.0-52-generic/include -Iinclude -I/usr/src/linux-headers-3.13.0-52-generic/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/usr/src/linux-headers-3.13.0-52-generic/include/uapi -Iinclude/generated/uapi -include /usr/src/linux-headers-3.13.0-52-generic/include/linux/kconfig.h -Iubuntu/include -I/usr/src/linux-headers-3.13.0-52-generic/ubuntu/include   -I/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m64 -mno-mmx -mno-sse -mpreferred-stack-boundary=3 -mtune=generic -mno-red-zone -mcmodel=kernel -funit-at-a-time -maccumulate-outgoing-args -fstack-protector -DCONFIG_X86_X32_ABI -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -DCONFIG_AS_FXSAVEQ=1 -DCONFIG_AS_AVX=1 -DCONFIG_AS_AVX2=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx -Wframe-larger-than=1024 -Wno-unused-but-set-variable -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-var-tracking-assignments -pg -mfentry -DCC_USING_FENTRY -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -Werror=implicit-int -Werror=strict-prototypes -DCC_HAVE_ASM_GOTO   -I/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all -DSK_USE_CSUM -DSK_DIAG_SUPPORT -DYUKON -DYUK2 -DCONFIG_SK98LIN_ZEROCOPY -DSK_NO_RLMT -DSK_LINUX -DUSE_SK_RSS_SUPPORT -DSK98LIN_DIAG  -DMODULE  -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(skge)"  -D"KBUILD_MODNAME=KBUILD_STR(sk98lin)" -c -o /tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.o /tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.c
  cc -Wp,-MD,/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/.sky2.o.d  -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/4.8/include -I/usr/src/linux-headers-lbm- -I/usr/src/linux-headers-3.13.0-52-generic/arch/x86/include -Iarch/x86/include/generated  -I/usr/src/linux-headers-3.13.0-52-generic/include -Iinclude -I/usr/src/linux-headers-3.13.0-52-generic/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/usr/src/linux-headers-3.13.0-52-generic/include/uapi -Iinclude/generated/uapi -include /usr/src/linux-headers-3.13.0-52-generic/include/linux/kconfig.h -Iubuntu/include -I/usr/src/linux-headers-3.13.0-52-generic/ubuntu/include   -I/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m64 -mno-mmx -mno-sse -mpreferred-stack-boundary=3 -mtune=generic -mno-red-zone -mcmodel=kernel -funit-at-a-time -maccumulate-outgoing-args -fstack-protector -DCONFIG_X86_X32_ABI -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -DCONFIG_AS_FXSAVEQ=1 -DCONFIG_AS_AVX=1 -DCONFIG_AS_AVX2=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx -Wframe-larger-than=1024 -Wno-unused-but-set-variable -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-var-tracking-assignments -pg -mfentry -DCC_USING_FENTRY -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -Werror=implicit-int -Werror=strict-prototypes -DCC_HAVE_ASM_GOTO   -I/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all -DSK_USE_CSUM -DSK_DIAG_SUPPORT -DYUKON -DYUK2 -DCONFIG_SK98LIN_ZEROCOPY -DSK_NO_RLMT -DSK_LINUX -DUSE_SK_RSS_SUPPORT -DSK98LIN_DIAG  -DMODULE  -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(sky2)"  -D"KBUILD_MODNAME=KBUILD_STR(sk98lin)" -c -o /tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/sky2.o /tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/sky2.c
In file included from /tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.c:78:0:
/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/h/skpcidevid.h:32:47: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__devinitdata'
static struct pci_device_id sk98lin_pci_tbl[] __devinitdata = {
                                               ^
/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.c:112:23: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'sk98lin_init_device'
static int  __devinit sk98lin_init_device(struct pci_dev *pdev, const struct pci_device_id *ent);
                       ^
/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.c:390:14: error: 'sk98lin_pci_tbl' undeclared here (not in a function)
  .id_table = sk98lin_pci_tbl,
              ^
/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.c:391:12: error: 'sk98lin_init_device' undeclared here (not in a function)
  .probe  = sk98lin_init_device,
            ^
/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.c:392:2: error: implicit declaration of function '__devexit_p' [-Werror=implicit-function-declaration]
  .remove  = __devexit_p(sk98lin_remove_device),
  ^
/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.c:392:2: error: initializer element is not constant
/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.c:392:2: error: (near initialization for 'sk98lin_driver.remove')
/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.c:449:22: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'sk98lin_init_device'
static int __devinit sk98lin_init_device(struct pci_dev *pdev,
                      ^
/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.c:2170:22: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'SkGeBoardInit'
static int __devinit SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC)
                      ^
/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/sky2.c: In function 'HandleReceives':
/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/sky2.c:1986:4: error: too few arguments to function '__vlan_hwaccel_put_tag'
    __vlan_hwaccel_put_tag(pMsg, be16_to_cpu(Vlan));
    ^
In file included from /tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/sky2.c:38:0:
/usr/src/linux-headers-3.13.0-52-generic/include/linux/if_vlan.h:338:31: note: declared here
static inline struct sk_buff *__vlan_hwaccel_put_tag(struct sk_buff *skb,
                               ^
/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.c:142:12: warning: 'SkGeBoardInit' declared 'static' but never defined [-Wunused-function]
static int SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC);
            ^
/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.c:2491:13: warning: 'BoardInitMem' defined but not used [-Wunused-function]
static void BoardInitMem(
             ^
/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.c:5256:13: warning: 'GetConfiguration' defined but not used [-Wunused-function]
static void GetConfiguration(
             ^
/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.c:6045:13: warning: 'ProductStr' defined but not used [-Wunused-function]
static void ProductStr(SK_AC *pAC)
             ^
/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.c:3504:12: warning: 'SkGePoll' defined but not used [-Wunused-function]
static int SkGePoll(struct napi_struct *napi, int WorkToDo) {
            ^
/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.c:877:12: warning: 'SkGeInitPCI' defined but not used [-Wunused-function]
static int SkGeInitPCI(SK_AC *pAC)
            ^
/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.c:306:20: warning: 'BootString' defined but not used [-Wunused-variable]
static const char *BootString = BOOT_STRING;
                    ^
/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.c:319:27: warning: 'sk98lin_ethtool_ops' defined but not used [-Wunused-variable]
static struct ethtool_ops sk98lin_ethtool_ops = {
                           ^
In file included from /tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.c:66:0:
/usr/src/linux-headers-3.13.0-52-generic/include/linux/module.h:88:32: error: '__mod_pci_device_table' aliased to undefined symbol 'sk98lin_pci_tbl'
extern const struct gtype##_id __mod_##gtype##_table  \
                                ^
/usr/src/linux-headers-3.13.0-52-generic/include/linux/module.h:146:3: note: in expansion of macro 'MODULE_GENERIC_TABLE'
   MODULE_GENERIC_TABLE(type##_device,name)
   ^
/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.c:386:1: note: in expansion of macro 'MODULE_DEVICE_TABLE'
MODULE_DEVICE_TABLE(pci, sk98lin_pci_tbl);
^
make[2]: *** [/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/sky2.o] Error 1
make[2]: *** Waiting for unfinished jobs....
cc1: some warnings being treated as errors
make[2]: *** [/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all/skge.o] Error 1
make[1]: *** [_module_/tmp/Sk98INGgdRXgfZIROEgYcYSXH/all] Error 2
make: *** [sub-make] Error 2
make: Leaving directory `/usr/src/linux-headers-3.13.0-52-generic'
+++ Compiler error


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 19 Mayıs 2015 - 10:27:39
Dun gun boyu bilgisayar acikti. Bugun yeniden actigimda asagidaki gibi bir ekranla karsilastim.



Bilgisayar acildiktan sonra yukaridaki menude baglanti yoneticisi simgesi yok. Adaptor hala lspci de gozukmuyor. Bunlara ek olarak wifi kapanmis. Lspci de gozukuyor ancak wifiye nasil baglanacagimi bilmiyorum. Ag kisminda wifi gozukmuyor.

[heartsmagic]

Kablosuz namına bir şeyler yaptı mı? Durduk yere onun da sorun yapması bir garip. Ağ ile ilgili komut çıktıları şu an nasıl?
agkomut