Ubuntu 14.10 Takılma Sorunu.

[mehmet015]

Merhaba Arkadaşlar;

-("Ubuntu Açıldıktan yaklaşık 15-20 Dk sonra donup kalıyor numlock tuşunun ışığı bastıktan 25-30 sn sonra yanıyor sönüyor bazen hiç tepki vermiyor.")
+Ubuntu 14.10 64 bit yüklü sadece ubuntu yüklü başka * bir şey kurulu değil hdd tek parça ve tamamı ubuntuya ait.
+Ubuntu Kurulumunu tam 3 farklı kaynakla yaptım fakat sonuç aynı 1 tane ubuntu 14.04 dvdsi ile 1 tane ubuntu 14.10  ve son olarak flash belleği bootable yaparak kurdum ve şuanda o şekilde yüklü.
+Ekran kartı Nvidia fakat sürücülerini kurmadım yani X.org'un kendi sürücüleri tanımlı.
+Ubuntuyu yaklaşık 1 sene kadar önce sorunsuz bir şekilde kurup kullanmıştım "Herhangi bir parçası değişmedi" büyük ihtimalle donanımsal bir sorun değil
+Floppy'yi Bios'tan iptal ettim. ("Forumda biraz araştırma yaptım böyle bir öneri vardı ")
+lspci çıktısı şu şekilde ;

Kod Seç Genişlet

mehmet@Poop:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS780 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
00:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 3)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: NVIDIA Corporation GT215 [GeForce GT 220] (rev a2)
01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
+Eksik yada yanlış *bir şeyler yaptıysam lütfen belirtin.

[if]

@mehmet015, bilgisayarda ne kadar RAM var? Marka ve modeli nedir?

[mehmet015]

Herhangi bir markası yok PC toplama ,eski bir pc anlcak ubuntu için yeterli (2Gb RAM 1 GB ekran karti )

[if]

Kod Seç Genişlet


dmesg

çıktısına bakayım. Ekran kartı için hangi sürücüyü kullanıyorsunuz?

[mehmet015]

Kod Seç Genişlet


dmesg

çıktısına bakayım. Ekran kartı için hangi sürücüyü kullanıyorsunuz?

Çıktı şu şekilde ;

Kod Seç Genişlet

[    1.017227] zbud: loaded
[    1.017400] VFS: Disk quotas dquot_6.5.2
[    1.017432] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.017957] fuse init (API version 7.23)
[    1.018173] msgmni has been set to 3996
[    1.018237] Key type big_key registered
[    1.018703] Key type asymmetric registered
[    1.018707] Asymmetric key parser 'x509' registered
[    1.018784] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.018844] io scheduler noop registered
[    1.018846] io scheduler deadline registered (default)
[    1.018890] io scheduler cfq registered
[    1.019096] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[    1.019219] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[    1.019283] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.019297] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.019410] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.019413] ACPI: Power Button [PWRB]
[    1.019445] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.019447] ACPI: Power Button [PWRF]
[    1.019793] thermal LNXTHERM:00: registered as thermal_zone0
[    1.019794] ACPI: Thermal Zone [THRM] (39 C)
[    1.019823] GHES: HEST is not enabled!
[    1.019925] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.040451] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.041923] Linux agpgart interface v0.103
[    1.043343] brd: module loaded
[    1.044197] loop: module loaded
[    1.044431] libphy: Fixed MDIO Bus: probed
[    1.044434] tun: Universal TUN/TAP device driver, 1.6
[    1.044435] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.044531] PPP generic driver version 2.4.2
[    1.044643] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.044650] ehci-pci: EHCI PCI platform driver
[    1.044783] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.044788] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.044793] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.044805] ehci-pci 0000:00:12.2: debug port 1
[    1.044851] ehci-pci 0000:00:12.2: irq 17, io mem 0xfcfff000
[    1.056332] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.056398] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.056400] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.056401] usb usb1: Product: EHCI Host Controller
[    1.056403] usb usb1: Manufacturer: Linux 3.16.0-34-generic ehci_hcd
[    1.056404] usb usb1: SerialNumber: 0000:00:12.2
[    1.056533] hub 1-0:1.0: USB hub found
[    1.056538] hub 1-0:1.0: 6 ports detected
[    1.056784] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.056789] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.056792] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.056804] ehci-pci 0000:00:13.2: debug port 1
[    1.056846] ehci-pci 0000:00:13.2: irq 19, io mem 0xfcffa800
[    1.068306] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.068359] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.068360] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.068362] usb usb2: Product: EHCI Host Controller
[    1.068363] usb usb2: Manufacturer: Linux 3.16.0-34-generic ehci_hcd
[    1.068364] usb usb2: SerialNumber: 0000:00:13.2
[    1.068515] hub 2-0:1.0: USB hub found
[    1.068520] hub 2-0:1.0: 6 ports detected
[    1.068657] ehci-platform: EHCI generic platform driver
[    1.068670] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.068674] ohci-pci: OHCI PCI platform driver
[    1.068799] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.068805] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.068832] ohci-pci 0000:00:12.0: irq 16, io mem 0xfcffe000
[    1.128298] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.128302] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.128303] usb usb3: Product: OHCI PCI host controller
[    1.128305] usb usb3: Manufacturer: Linux 3.16.0-34-generic ohci_hcd
[    1.128306] usb usb3: SerialNumber: 0000:00:12.0
[    1.128464] hub 3-0:1.0: USB hub found
[    1.128472] hub 3-0:1.0: 3 ports detected
[    1.128671] ohci-pci 0000:00:12.1: OHCI PCI host controller
[    1.128675] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[    1.128699] ohci-pci 0000:00:12.1: irq 16, io mem 0xfcffd000
[    1.188250] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.188253] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.188255] usb usb4: Product: OHCI PCI host controller
[    1.188256] usb usb4: Manufacturer: Linux 3.16.0-34-generic ohci_hcd
[    1.188257] usb usb4: SerialNumber: 0000:00:12.1
[    1.188408] hub 4-0:1.0: USB hub found
[    1.188417] hub 4-0:1.0: 3 ports detected
[    1.188618] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.188623] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.188657] ohci-pci 0000:00:13.0: irq 18, io mem 0xfcffc000
[    1.248186] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.248190] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.248191] usb usb5: Product: OHCI PCI host controller
[    1.248193] usb usb5: Manufacturer: Linux 3.16.0-34-generic ohci_hcd
[    1.248194] usb usb5: SerialNumber: 0000:00:13.0
[    1.248348] hub 5-0:1.0: USB hub found
[    1.248356] hub 5-0:1.0: 3 ports detected
[    1.248559] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    1.248564] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[    1.248593] ohci-pci 0000:00:13.1: irq 18, io mem 0xfcffb000
[    1.308144] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.308147] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.308149] usb usb6: Product: OHCI PCI host controller
[    1.308150] usb usb6: Manufacturer: Linux 3.16.0-34-generic ohci_hcd
[    1.308151] usb usb6: SerialNumber: 0000:00:13.1
[    1.308305] hub 6-0:1.0: USB hub found
[    1.308313] hub 6-0:1.0: 3 ports detected
[    1.308538] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.308542] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[    1.308566] ohci-pci 0000:00:14.5: irq 18, io mem 0xfcff9000
[    1.368081] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.368085] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.368086] usb usb7: Product: OHCI PCI host controller
[    1.368088] usb usb7: Manufacturer: Linux 3.16.0-34-generic ohci_hcd
[    1.368089] usb usb7: SerialNumber: 0000:00:14.5
[    1.368226] hub 7-0:1.0: USB hub found
[    1.368234] hub 7-0:1.0: 2 ports detected
[    1.368319] ohci-platform: OHCI generic platform driver
[    1.368332] uhci_hcd: USB Universal Host Controller Interface driver
[    1.368403] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.368844] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.368855] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.369028] mousedev: PS/2 mouse device common for all mice
[    1.369187] rtc_cmos 00:01: RTC can wake from S4
[    1.369343] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.369370] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.369436] device-mapper: uevent: version 1.0.3
[    1.369520] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.369536] ledtrig-cpu: registered to indicate activity on CPUs
[    1.369625] TCP: cubic registered
[    1.369720] NET: Registered protocol family 10
[    1.369924] NET: Registered protocol family 17
[    1.369935] Key type dns_resolver registered
[    1.370248] Loading compiled-in X.509 certificates
[    1.371249] Loaded X.509 cert 'Magrathea: Glacier signing key: 720f95eab0ea3a33b3bedee1ee3ae788f51cae26'
[    1.371263] registered taskstats version 1
[    1.373138] Key type trusted registered
[    1.376340] Key type encrypted registered
[    1.376350] AppArmor: AppArmor sha1 policy hashing enabled
[    1.376354] ima: No TPM chip found, activating TPM-bypass!
[    1.376370] evm: HMAC attrs: 0x1
[    1.376676]   Magic number: 11:916:999
[    1.376719] rtc_cmos 00:01: hash matches
[    1.376721]  pnp0: hash matches
[    1.376792] rtc_cmos 00:01: setting system clock to 2015-04-21 18:59:49 UTC (1429642789)
[    1.376865] acpi-cpufreq: overriding BIOS provided _PSD data
[    1.376936] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.376937] EDD information not available.
[    1.376984] PM: Hibernation image not present or could not be loaded.
[    1.378230] Freeing unused kernel memory: 1360K (ffffffff81d2d000 - ffffffff81e81000)
[    1.378234] Write protecting the kernel read-only data: 12288k
[    1.379422] Freeing unused kernel memory: 432K (ffff880001794000 - ffff880001800000)
[    1.380655] Freeing unused kernel memory: 484K (ffff880001b87000 - ffff880001c00000)
[    1.396636] systemd-udevd[108]: starting version 208
[    1.397159] random: systemd-udevd urandom read with 3 bits of entropy available
[    1.417917] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.417928] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.418137] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[    1.418296] r8169 0000:02:00.0 eth0: RTL8102e at 0xffffc90000008000, 00:30:67:9f:11:7e, XID 04c00000 IRQ 42
[    1.418767] ahci 0000:00:11.0: version 3.0
[    1.418903] ahci 0000:00:11.0: irq 43 for MSI/MSI-X
[    1.418985] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.418988] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[    1.419685] scsi0 : ahci
[    1.420066] scsi1 : ahci
[    1.420136] scsi2 : ahci
[    1.420202] scsi3 : ahci
[    1.420246] ata1: SATA max UDMA/133 abar m1024@0xfcfff800 port 0xfcfff900 irq 43
[    1.420249] ata2: SATA max UDMA/133 abar m1024@0xfcfff800 port 0xfcfff980 irq 43
[    1.420251] ata3: SATA max UDMA/133 abar m1024@0xfcfff800 port 0xfcfffa00 irq 43
[    1.420254] ata4: SATA max UDMA/133 abar m1024@0xfcfff800 port 0xfcfffa80 irq 43
[    1.424013] Floppy drive(s): fd0 is 1.44M
[    1.430367] scsi4 : pata_atiixp
[    1.434784] scsi5 : pata_atiixp
[    1.434857] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.434859] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.444617] FDC 0 is a post-1991 82077
[    1.739715] ata3: SATA link down (SStatus 0 SControl 300)
[    1.739800] ata4: SATA link down (SStatus 0 SControl 300)
[    1.903553] usb 4-1: new low-speed USB device number 2 using ohci-pci
[    1.911555] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.911588] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.912804] ata1.00: ATA-8: ST3500413AS, JC45, max UDMA/133
[    1.912808] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.914215] ata1.00: configured for UDMA/133
[    1.914430] scsi 0:0:0:0: Direct-Access     ATA      ST3500413AS      JC45 PQ: 0 ANSI: 5
[    1.914573] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
[    1.914783] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.914787] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.914861] sd 0:0:0:0: [sda] Write Protect is off
[    1.914864] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.914912] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.918395] ata2.00: configured for UDMA/100
[    1.926933] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS50  TN03 PQ: 0 ANSI: 5
[    1.947296] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.947301] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.947446] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.947520] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.955293]  sda: sda1 sda2 < sda5 >
[    1.955704] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.011447] tsc: Refined TSC clocksource calibration: 3100.174 MHz
[    2.069406] usb 4-1: New USB device found, idVendor=15d9, idProduct=0a4d
[    2.069410] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.069412] usb 4-1: Product:  USB OPTICAL MOUSE
[    2.074638] hidraw: raw HID events driver (C) Jiri Kosina
[    2.080560] usbcore: registered new interface driver usbhid
[    2.080563] usbhid: USB HID core driver
[    2.082319] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:15D9:0A4D.0001/input/input5
[    2.082403] hid-generic 0003:15D9:0A4D.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:12.1-1/input0
[    2.207273] usb 3-1: new low-speed USB device number 2 using ohci-pci
[    2.375130] usb 3-1: New USB device found, idVendor=1c4f, idProduct=0002
[    2.375134] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.375135] usb 3-1: Product: USB Keyboard
[    2.375137] usb 3-1: Manufacturer: SIGMACHIP
[    2.382414] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:1C4F:0002.0002/input/input6
[    2.382531] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:12.0-1/input0
[    2.387422] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/0003:1C4F:0002.0003/input/input7
[    2.387528] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:12.0-1/input1
[    2.622420] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.010601] Switched to clocksource tsc
[    3.414733] random: nonblocking pool is initialized
[    8.923822] Adding 2094076k swap on /dev/sda5.  Priority:-1 extents:1 across:2094076k FS
[    9.200251] systemd-udevd[307]: starting version 208
[    9.279351] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.297156] parport_pc 00:03: reported by Plug and Play ACPI
[    9.297218] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    9.298634] wmi: Mapper loaded
[    9.313988] lp: driver loaded but no devices found
[    9.316626] [drm] Initialized drm 1.1.0 20060810
[    9.329561] ppdev: user-space parallel port driver
[    9.350907] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SOR1) (20140424/utaddress-258)
[    9.350915] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.363955] MCE: In-kernel MCE decoding enabled.
[    9.367304] EDAC MC: Ver: 3.0.0
[    9.388328] AMD64 EDAC driver v3.4.0
[    9.388366] EDAC amd64: DRAM ECC disabled.
[    9.388371] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[    9.389102] lp0: using parport0 (interrupt-driven).
[    9.391050] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0a3280a2
[    9.391055] nouveau  [  DEVICE][0000:01:00.0] Chipset: GT215 (NVA3)
[    9.391057] nouveau  [  DEVICE][0000:01:00.0] Family : NV50
[    9.391083] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[    9.470704] kvm: Nested Virtualization enabled
[    9.470710] kvm: Nested Paging enabled
[    9.477057] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[    9.477058] nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
[    9.477166] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[    9.477169] nouveau  [   VBIOS][0000:01:00.0] version 70.15.4a.00.00
[    9.498595] nouveau 0000:01:00.0: irq 44 for MSI/MSI-X
[    9.498607] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[    9.498642] nouveau W[     PFB][0000:01:00.0][0x00000000][ffff88007b53c000] reclocking of this ram type unsupported
[    9.498644] nouveau  [     PFB][0000:01:00.0] RAM type: DDR2
[    9.498645] nouveau  [     PFB][0000:01:00.0] RAM size: 1024 MiB
[    9.498647] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 2048 tags
[    9.499541] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 890000uv
[    9.707127] audit: type=1400 audit(1429642797.831:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=370 comm="apparmor_parser"
[    9.707133] audit: type=1400 audit(1429642797.831:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=370 comm="apparmor_parser"
[    9.707135] audit: type=1400 audit(1429642797.831:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=370 comm="apparmor_parser"
[    9.708733] audit: type=1400 audit(1429642797.835:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=380 comm="apparmor_parser"
[    9.708739] audit: type=1400 audit(1429642797.835:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=380 comm="apparmor_parser"
[    9.708742] audit: type=1400 audit(1429642797.835:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=380 comm="apparmor_parser"
[    9.710911] sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    9.710912] sound hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.710914] sound hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    9.710914] sound hdaudioC0D2:    mono: mono_out=0x0
[    9.710915] sound hdaudioC0D2:    dig-out=0x1e/0x0
[    9.710916] sound hdaudioC0D2:    inputs:
[    9.710917] sound hdaudioC0D2:      Front Mic=0x19
[    9.710919] sound hdaudioC0D2:      Rear Mic=0x18
[    9.710919] sound hdaudioC0D2:      Line=0x1a
[    9.725161] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[    9.746314] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    9.746411] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    9.746484] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[    9.746558] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[    9.954508] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   10.624718] init: Error while reading from descriptor: Broken pipe
[   10.626050] init: failsafe main process (577) killed by TERM signal
[   10.811328] nouveau  [  PTHERM][0000:01:00.0] FAN control: PWM
[   10.811346] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[   10.811379] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[   10.811406] nouveau  [     CLK][0000:01:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[   10.811409] nouveau  [     CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 324 MHz
[   10.811412] nouveau  [     CLK][0000:01:00.0] 0f: core 550 MHz shader 1100 MHz memory 400 MHz
[   10.811436] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 324 MHz
[   10.811614] [TTM] Zone  kernel: Available graphics memory: 1024364 kiB
[   10.811616] [TTM] Initializing pool allocator
[   10.811620] [TTM] Initializing DMA pool allocator
[   10.811629] nouveau  [     DRM] VRAM: 1024 MiB
[   10.811630] nouveau  [     DRM] GART: 1048576 MiB
[   10.811634] nouveau  [     DRM] TMDS table version 2.0
[   10.811635] nouveau  [     DRM] DCB version 4.0
[   10.811637] nouveau  [     DRM] DCB outp 00: 02000300 00000000
[   10.811639] nouveau  [     DRM] DCB outp 01: 01000302 00020030
[   10.811640] nouveau  [     DRM] DCB outp 02: 01011310 00000000
[   10.811641] nouveau  [     DRM] DCB conn 00: 00001030
[   10.811643] nouveau  [     DRM] DCB conn 01: 00000100
[   10.819078] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   10.819079] [drm] Driver supports precise vblank timestamp query.
[   10.827205] nouveau  [     DRM] MM: using COPY for buffer copies
[   10.906739] nouveau  [     DRM] allocated 1600x900 fb: 0x70000, bo ffff88007b97c800
[   10.906892] fbcon: nouveaufb (fb0) is primary device
[   10.976536] Console: switching to colour frame buffer device 200x56
[   10.978239] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[   10.978241] nouveau 0000:01:00.0: registered panic notifier
[   10.983211] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[   10.983326] snd_hda_intel 0000:01:00.1: Disabling MSI
[   10.983338] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   11.231673] audit: type=1400 audit(1429642799.359:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=691 comm="apparmor_parser"
[   11.231682] audit: type=1400 audit(1429642799.359:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=691 comm="apparmor_parser"
[   11.233038] audit: type=1400 audit(1429642799.359:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=691 comm="apparmor_parser"
[   11.233045] audit: type=1400 audit(1429642799.359:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=691 comm="apparmor_parser"
[   11.657970] init: cups main process (743) killed by HUP signal
[   11.657983] init: cups main process ended, respawning
[   11.775047] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[   11.775117] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[   11.775188] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[   11.775261] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[   12.504012] Bluetooth: Core ver 2.19
[   12.504030] NET: Registered protocol family 31
[   12.504032] Bluetooth: HCI device and connection manager initialized
[   12.504039] Bluetooth: HCI socket layer initialized
[   12.504041] Bluetooth: L2CAP socket layer initialized
[   12.504050] Bluetooth: SCO socket layer initialized
[   12.524919] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.524923] Bluetooth: BNEP filters: protocol multicast
[   12.524932] Bluetooth: BNEP socket layer initialized
[   12.577120] Bluetooth: RFCOMM TTY layer initialized
[   12.577132] Bluetooth: RFCOMM socket layer initialized
[   12.577140] Bluetooth: RFCOMM ver 1.11
[   13.673830] systemd-logind[1184]: New seat seat0.
[   13.761194] systemd-logind[1184]: Watching system buttons on /dev/input/event1 (Power Button)
[   13.761246] systemd-logind[1184]: Watching system buttons on /dev/input/event0 (Power Button)
[   13.801754] r8169 0000:02:00.0 eth0: link down
[   13.801768] r8169 0000:02:00.0 eth0: link down
[   13.801806] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.386739] r8169 0000:02:00.0 eth0: link up
[   15.386749] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   19.981918] init: plymouth-upstart-bridge main process ended, respawning
[   19.998357] init: plymouth-upstart-bridge main process ended, respawning
[   20.075765] systemd-logind[1184]: Failed to start unit user@112.service: Unknown unit: user@112.service
[   20.075775] systemd-logind[1184]: Failed to start user service: Unknown unit: user@112.service
[   20.080884] systemd-logind[1184]: New session c1 of user lightdm.
[   20.080926] systemd-logind[1184]: Linked /tmp/.X11-unix/X0 to /run/user/112/X11-display.
[   41.743469] audit_printk_skb: 63 callbacks suppressed
[   41.743473] audit: type=1400 audit(1429642829.907:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1899 comm="apparmor_parser"
[   41.743482] audit: type=1400 audit(1429642829.907:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1899 comm="apparmor_parser"
[   41.758481] audit: type=1400 audit(1429642829.923:35): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=1899 comm="apparmor_parser"
[  453.585010] systemd-logind[1184]: Failed to start unit user@116.service: Unknown unit: user@116.service
[  453.585021] systemd-logind[1184]: Failed to start user service: Unknown unit: user@116.service
[  453.590110] systemd-logind[1184]: New session c2 of user guest-2IeUL7.
[  453.590150] systemd-logind[1184]: Linked /tmp/.X11-unix/X0 to /run/user/116/X11-display.
[  454.287821] audit: type=1400 audit(1429643242.891:36): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/sys/kernel/cap_last_cap" pid=2091 comm="gnome-keyring-d" requested_mask="r" denied_mask="r" fsuid=116 ouid=0
[  454.986593] audit: type=1400 audit(1429643243.591:37): apparmor="DENIED" operation="mount" info="failed mntpnt match" error=-13 profile="/usr/lib/lightdm/lightdm-guest-session" name="/run/user/116/gvfs/" pid=2160 comm="gvfsd-fuse" fstype="fuse.gvfsd-fuse" srcname="gvfsd-fuse" flags="rw, nosuid, nodev"
[  459.064032] audit: type=1400 audit(1429643247.671:38): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/1/cgroup" pid=2371 comm="gnome-screensav" requested_mask="r" denied_mask="r" fsuid=116 ouid=0
[  459.182214] audit: type=1400 audit(1429643247.791:39): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/1/cgroup" pid=2263 comm="gnome-session" requested_mask="r" denied_mask="r" fsuid=116 ouid=0
[  459.250893] audit: type=1400 audit(1429643247.859:40): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/sys/kernel/cap_last_cap" pid=2423 comm="gnome-keyring-d" requested_mask="r" denied_mask="r" fsuid=116 ouid=0
[  459.253670] audit: type=1400 audit(1429643247.859:41): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/sys/kernel/cap_last_cap" pid=2424 comm="gnome-keyring-d" requested_mask="r" denied_mask="r" fsuid=116 ouid=0
[  459.257057] audit: type=1400 audit(1429643247.863:42): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/sys/kernel/cap_last_cap" pid=2425 comm="gnome-keyring-d" requested_mask="r" denied_mask="r" fsuid=116 ouid=0
[  459.261138] audit: type=1400 audit(1429643247.867:43): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/sys/kernel/cap_last_cap" pid=2426 comm="gnome-keyring-d" requested_mask="r" denied_mask="r" fsuid=116 ouid=0
[  460.917891] audit: type=1400 audit(1429643249.527:44): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/1/cgroup" pid=2342 comm="indicator-sound" requested_mask="r" denied_mask="r" fsuid=116 ouid=0
[  461.138447] audit: type=1400 audit(1429643249.747:45): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/1/cgroup" pid=2474 comm="polkit-gnome-au" requested_mask="r" denied_mask="r" fsuid=116 ouid=0
[  461.242974] audit: type=1400 audit(1429643249.851:46): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/1/cgroup" pid=2256 comm="unity-settings-" requested_mask="r" denied_mask="r" fsuid=116 ouid=0
[  461.764942] audit: type=1400 audit(1429643250.375:47): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/1/cgroup" pid=2544 comm="gvfs-udisks2-vo" requested_mask="r" denied_mask="r" fsuid=116 ouid=0
[  470.178425] systemd-logind[1184]: New session c3 of user lightdm.
[  473.222719] systemd-logind[1184]: Failed to start unit user@1000.service: Unknown unit: user@1000.service
[  473.222727] systemd-logind[1184]: Failed to start user service: Unknown unit: user@1000.service
[  473.227051] systemd-logind[1184]: New session c4 of user mehmet.
[  473.227074] systemd-logind[1184]: Linked /tmp/.X11-unix/X1 to /run/user/1000/X11-display.
mehmet@Poop:~$


Ek olarak bilgisayarın içini açıp ram slotlarını ekran kartını ve işlemci üzerinde birikmiş olan tozları aldım işlemci gerçekten berbat durumdaydı belkide sorun odur, sonuçları buradan yazarım.

[mehmet015]

*Temizlil işe yaramadı.

[burak öztürk]

Harddisk çok mu eski?
Geçen yıl yaşadığım donmalar ve ilk yarım saat sonrasında meydana gelen aşırı yavaşlama nedeniyle (ki benim diskim 9yaşındaydı ve çalışırken sarsıntılı ve gürültülüydü)
yeni bir disk aldım ve artık o donmalar yok, gayet akıcı şekilde kullanıyorum ve Ubuntu masaüstü daha hızlı açılıyor.

[mehmet015]

Harddisk çok mu eski?
Geçen yıl yaşadığım donmalar ve ilk yarım saat sonrasında meydana gelen aşırı yavaşlama nedeniyle (ki benim diskim 9yaşındaydı ve çalışırken sarsıntılı ve gürültülüydü)
yeni bir disk aldım ve artık o donmalar yok, gayet akıcı şekilde kullanıyorum ve Ubuntu masaüstü daha hızlı açılıyor.

Pc ile beraber gelen harddisk yaklaşık 5 yıllık fakat biraz fazla format yedi, belkide bad sector yüzünden oluyordur bugün onu düzeltmeye çalışacağım belki faydalı olur.
Bu arada evet biraz gürültülü çalışıyor

Ekleme : Bad Sector'ün herhangi bir yazılımsal çözümü yokmuş bunuda öğrenmiş oldum.

Ekleme2:Cairo-Dock Yükledim oturum açarken ön Cairo-Dock'u seçtim ve yaklaşık 40-45 'dk kullandım ve herhangi bir takılma olmadı,ama gnome'a gelince 5-10'dk sonra donup kalıyor eğer arkaplanda müzik çalıyorsa son sn tekrarlanıp duruyor...


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 22 Nisan 2015 - 21:16:35
Linux mint kurdum ayni sorun ondada var. peppermint 5 de herhangi bir sorun yok



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 22 Nisan 2015 - 23:30:48
Mint'te Tekrar Sorun Yaşamadım Konu Kapatılabilir.