Ubuntu wifi sorunu

[road_black]

Merhaba arkadaşlar... Ben merakımdan dolayı ubuntu ya geçtim. Ama internete bağlanmak için kullandığım İnca 300(realtek 8192cu) wifi adaptörü bir türlü çalıştıramadım. Diğer konuları da incelememe rağmen hiç * bir şey olmadı..

Kod Seç Genişlet


lsusb:

Bus 001 Device 005: ID 058f:3820 Alcor Micro Corp.
Bus 001 Device 004: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 062a:0201 Creative Labs Defender Office Keyboard (K7310) S Zodiak KM-9010
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 13ee:0001 MosArt
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

lspci:

00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] (rev a2)
01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

lsmod:

Module                  Size  Used by
snd_hda_codec_hdmi     45303  4
joydev                 17101  0
hid_generic            12492  0
gpio_ich               13229  0
arc4                   12536  2
rtl8192cu              66675  0
rtl_usb                18072  1 rtl8192cu
snd_hda_codec_realtek    51029  1
rtlwifi                52835  2 rtl_usb,rtl8192cu
snd_hda_intel          42730  5
snd_hda_codec         164067  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep              13272  1 snd_hda_codec
rtl8192c_common        47340  1 rtl8192cu
snd_pcm                85501  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
nouveau               969577  3

[heartsmagic]

@road_black, komut çıktıları tablo içine almana gerek yok, kod etiketi kullan lütfen: kodetiketi

Kartınla ilgili şöyle bir başlık mevcut: https://forum.ubuntu-tr.net/index.php?topic=37467.5

Sen bize ağ komutları ile ilgili tüm çıktıları geçmemişsin, lütfen onları geç tamamen: agkomut

Şu an için nasıl bir sorun yaşadığını bilemiyoruz, ağları hiç mi börmüyor? O başlıkta arkadaş bir sürücüden bahsetmiş en kötü onu deneriz. Ayrıca, lütfen yukarıdaki çıktıların yanına şu çıktıları koy:

Kod Seç Genişlet

uname -r
lsb_release -a

[road_black]

herhangi bir ağ yok ayrıca additional drivers ta baktığım zamanda herhangi birşey yok. ubuntuyu yeni yükledim güncelleme vs. işlemler içinde bunu tanıtmam gerekiyor.

Kod Seç Genişlet

cat /etc/lsb-release

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=14.04
DISTRIB_CODENAME=trusty
DISTRIB_DESCRIPTION="Ubuntu 14.04 LTS"


Kod Seç Genişlet

uname -a
Linux mtn-945GC-M4 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:08:14 UTC 2014 i686 i686 i686 GNU/Linux

Kod Seç Genişlet

lspci
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] (rev a2)
01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)


Kod Seç Genişlet

lsusb
Bus 001 Device 005: ID 058f:3820 Alcor Micro Corp.
Bus 001 Device 004: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 062a:0201 Creative Labs Defender Office Keyboard (K7310) S Zodiak KM-9010
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 13ee:0001 MosArt
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub



Kod Seç Genişlet

rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no


Kod Seç Genişlet

sudo lshw -C network
*-network               
       description: Ethernet interface
       product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: eth0
       version: 02
       serial: 00:30:67:31:4f:77
       size: 10Mbit/s
       capacity: 100Mbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       resources: irq:43 ioport:e800(size=256) memory:fbfff000-fbffffff memory:fbfe0000-fbfeffff memory:febe0000-febfffff
  *-network
       description: Wireless interface
       physical id: 1
       bus info: usb@1:4
       logical name: wlan0
       serial: 08:10:76:d6:fb:6c
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rtl8192cu driverversion=3.13.0-24-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bgn


Kod Seç Genişlet

ifconfig
No command 'itconfig' found, did you mean:
Command 'iwconfig' from package 'wireless-tools' (main)
Command 'htconfig' from package 'global' (universe)
Command 'qtconfig' from package 'qtchooser' (main)
Command 'ifconfig' from package 'net-tools' (main)
itconfig: command not found

Kod Seç Genişlet

iwconfig
wlan0     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:off
         
lo        no wireless extensions.

eth0      no wireless extensions.




Kod Seç Genişlet

iwlist scanning
wlan0     No scan results

lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.


Kod Seç Genişlet

lsmod
Module                  Size  Used by
snd_hda_codec_hdmi     45303  4
arc4                   12536  2
joydev                 17101  0
rtl8192cu              66675  0
rtl_usb                18072  1 rtl8192cu
hid_generic            12492  0
gpio_ich               13229  0
rtlwifi                52835  2 rtl_usb,rtl8192cu
rtl8192c_common        47340  1 rtl8192cu
mac80211              545990  3 rtl_usb,rtlwifi,rtl8192cu
snd_hda_codec_realtek    51029  1
snd_hda_intel          42730  5
snd_hda_codec         164067  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep              13272  1 snd_hda_codec
snd_pcm                85501  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc         14230  2 snd_pcm,snd_hda_intel
snd_seq_midi           13132  0
snd_seq_midi_event     14475  1 snd_seq_midi
snd_rawmidi            25135  1 snd_seq_midi
rfcomm                 53664  0
bnep                   18895  2
nouveau               969577  3
bluetooth             342263  10 bnep,rfcomm
mxm_wmi                12893  1 nouveau
wmi                    18673  2 mxm_wmi,nouveau
snd_seq                55383  2 snd_seq_midi_event,snd_seq_midi
psmouse                91033  0
uvcvideo               71309  0
serio_raw              13230  0
video                  18903  1 nouveau
videobuf2_vmalloc      13048  1 uvcvideo
ttm                    72698  1 nouveau
snd_seq_device         14137  3 snd_seq,snd_rawmidi,snd_seq_midi
videobuf2_memops       13170  1 videobuf2_vmalloc
drm_kms_helper         46907  1 nouveau
snd_timer              28584  2 snd_pcm,snd_seq
videobuf2_core         39258  1 uvcvideo
cfg80211              409394  2 mac80211,rtlwifi
usbhid                 47035  0
drm                   243792  5 ttm,drm_kms_helper,nouveau
videodev              108503  2 uvcvideo,videobuf2_core
hid                    87604  2 hid_generic,usbhid
snd                    60871  21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
lpc_ich                16864  0
i2c_algo_bit           13197  1 nouveau
soundcore              12600  1 snd
parport_pc             31981  0
ppdev                  17391  0
mac_hid                13037  0
lp                     13299  0
parport                40836  3 lp,ppdev,parport_pc
r8169                  61562  0
mii                    13654  1 r8169
floppy                 55378  0


Kod Seç Genişlet

dmesg
[    0.801230] msgmni has been set to 1727
[    0.801341] Key type big_key registered
[    0.802082] Key type asymmetric registered
[    0.802088] Asymmetric key parser 'x509' registered
[    0.802161] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.802228] io scheduler noop registered
[    0.802234] io scheduler deadline registered (default)
[    0.802287] io scheduler cfq registered
[    0.802606] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.802684] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[    0.802807] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.803009] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.803134] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.803165] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.803248] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    0.803251] vesafb: scrolling: redraw
[    0.803256] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.803395] vesafb: framebuffer at 0xdf000000, mapped to 0xf8480000, using 1216k, total 1216k
[    0.826934] Console: switching to colour frame buffer device 80x30
[    0.850344] fb0: VESA VGA frame buffer device
[    0.850396] ipmi message handler version 39.2
[    0.850507] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.850515] ACPI: Power Button [PWRB]
[    0.850585] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.850591] ACPI: Power Button [PWRF]
[    0.851348] thermal LNXTHERM:00: registered as thermal_zone0
[    0.851353] ACPI: Thermal Zone [THRM] (37 C)
[    0.851414] GHES: HEST is not enabled!
[    0.851511] isapnp: Scanning for PnP cards...
[    0.852102] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.872653] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.875225] Linux agpgart interface v0.103
[    0.878464] brd: module loaded
[    0.879986] loop: module loaded
[    0.880271] ata_piix 0000:00:1f.1: version 2.13
[    0.888075] scsi0 : ata_piix
[    0.888211] scsi1 : ata_piix
[    0.888299] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.888304] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.888476] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.891199] scsi2 : ata_piix
[    0.891575] scsi3 : ata_piix
[    0.891655] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
[    0.891660] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
[    0.892401] libphy: Fixed MDIO Bus: probed
[    0.892638] tun: Universal TUN/TAP device driver, 1.6
[    0.892642] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.892748] PPP generic driver version 2.4.2
[    0.892830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.892839] ehci-pci: EHCI PCI platform driver
[    0.893062] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.893074] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.893094] ehci-pci 0000:00:1d.7: debug port 1
[    0.897022] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.897107] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfcffbc00
[    0.908029] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.908186] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.908192] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.908197] usb usb1: Product: EHCI Host Controller
[    0.908202] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    0.908206] usb usb1: SerialNumber: 0000:00:1d.7
[    0.908433] hub 1-0:1.0: USB hub found
[    0.908452] hub 1-0:1.0: 8 ports detected
[    0.908885] ehci-platform: EHCI generic platform driver
[    0.908909] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.908913] ohci-pci: OHCI PCI platform driver
[    0.908940] ohci-platform: OHCI generic platform driver
[    0.908957] uhci_hcd: USB Universal Host Controller Interface driver
[    0.909152] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.909167] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.909201] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cc00
[    0.909329] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.909335] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.909340] usb usb2: Product: UHCI Host Controller
[    0.909344] usb usb2: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    0.909349] usb usb2: SerialNumber: 0000:00:1d.0
[    0.909550] hub 2-0:1.0: USB hub found
[    0.909569] hub 2-0:1.0: 2 ports detected
[    0.909899] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.909911] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.909943] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c880
[    0.910065] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.910071] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.910075] usb usb3: Product: UHCI Host Controller
[    0.910080] usb usb3: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    0.910084] usb usb3: SerialNumber: 0000:00:1d.1
[    0.910280] hub 3-0:1.0: USB hub found
[    0.910298] hub 3-0:1.0: 2 ports detected
[    0.910631] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.910643] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.910693] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
[    0.910799] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.910805] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.910809] usb usb4: Product: UHCI Host Controller
[    0.910814] usb usb4: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    0.910818] usb usb4: SerialNumber: 0000:00:1d.2
[    0.911011] hub 4-0:1.0: USB hub found
[    0.911026] hub 4-0:1.0: 2 ports detected
[    0.911348] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.911360] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.911408] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c480
[    0.911508] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.911514] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.911519] usb usb5: Product: UHCI Host Controller
[    0.911523] usb usb5: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    0.911528] usb usb5: SerialNumber: 0000:00:1d.3
[    0.911719] hub 5-0:1.0: USB hub found
[    0.911734] hub 5-0:1.0: 2 ports detected
[    0.912096] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.912536] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.912547] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.912768] mousedev: PS/2 mouse device common for all mice
[    0.913005] rtc_cmos 00:02: RTC can wake from S4
[    0.913168] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.913202] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.913345] device-mapper: uevent: version 1.0.3
[    0.913477] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.913524] platform eisa.0: Probing EISA bus 0
[    0.913530] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.913535] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.913540] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.913545] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.913550] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.913555] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.913559] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.913564] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.913569] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.913573] platform eisa.0: EISA: Detected 0 cards
[    0.913592] cpufreq-nforce2: No nForce2 chipset.
[    0.913601] ledtrig-cpu: registered to indicate activity on CPUs
[    0.913852] TCP: cubic registered
[    0.914059] NET: Registered protocol family 10
[    0.914403] NET: Registered protocol family 17
[    0.914424] Key type dns_resolver registered
[    0.914714] Using IPI No-Shortcut mode
[    0.914863] Loading compiled-in X.509 certificates
[    0.922489] Loaded X.509 cert 'Magrathea: Glacier signing key: 77d70e1df42996dc92b01d759d3e8562ea32a1c7'
[    0.922514] registered taskstats version 1
[    0.930152] Key type trusted registered
[    0.938135] Key type encrypted registered
[    0.946165] AppArmor: AppArmor sha1 policy hashing enabled
[    0.946172] IMA: No TPM chip found, activating TPM-bypass!
[    0.946587] regulator-dummy: disabling
[    0.946687]   Magic number: 10:322:101
[    0.946843] rtc_cmos 00:02: setting system clock to 2014-12-31 23:04:55 UTC (1420067095)
[    0.946956] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.946960] EDD information not available.
[    0.947023] PM: Hibernation image not present or could not be loaded.
[    1.066428] ata1.00: ATA-6: WDC WD400BB-22HEA1, 14.03G14, max UDMA/100
[    1.066436] ata1.00: 78165360 sectors, multi 16: LBA
[    1.066444] ata1.00: limited to UDMA/33 due to 40-wire cable
[    1.066820] ata3.01: ATA-8: ST1000DM003-1CH162, CC46, max UDMA/133
[    1.066826] ata3.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.080201] ata1.00: configured for UDMA/33
[    1.096370] ata3.01: configured for UDMA/133
[    1.113927] ata4.00: ATA-7: MAXTOR STM3160815AS, 3.AAD, max UDMA/133
[    1.113933] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.113944] ata4.01: ATAPI: TSSTcorp CDDVDW SH-222BB, SB00, max UDMA/100
[    1.161512] isapnp: No Plug & Play device found
[    1.161709] scsi 0:0:0:0: Direct-Access     ATA      WDC WD400BB-22HE 14.0 PQ: 0 ANSI: 5
[    1.161933] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.162008] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.162049] sd 0:0:0:0: [sda] Write Protect is off
[    1.162058] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.162109] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.162311] scsi 2:0:1:0: Direct-Access     ATA      ST1000DM003-1CH1 CC46 PQ: 0 ANSI: 5
[    1.162532] sd 2:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.162540] sd 2:0:1:0: [sdb] 4096-byte physical blocks
[    1.162592] sd 2:0:1:0: Attached scsi generic sg1 type 0
[    1.162687] sd 2:0:1:0: [sdb] Write Protect is off
[    1.162695] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.162763] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.172641]  sda: sda1
[    1.172998] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.180583] ata4.00: configured for UDMA/133
[    1.191875]  sdb: sdb1
[    1.192349] sd 2:0:1:0: [sdb] Attached SCSI disk
[    1.196157] ata4.01: configured for UDMA/100
[    1.196747] scsi 3:0:0:0: Direct-Access     ATA      MAXTOR STM316081 3.AA PQ: 0 ANSI: 5
[    1.196968] sd 3:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.197041] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    1.197114] sd 3:0:0:0: [sdc] Write Protect is off
[    1.197122] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.197178] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.198071] scsi 3:0:1:0: CD-ROM            TSSTcorp CDDVDW SH-222BB  SB00 PQ: 0 ANSI: 5
[    1.228582]  sdc: sdc1 sdc2
[    1.231934] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.231941] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.232161] sd 3:0:0:0: [sdc] Attached SCSI disk
[    1.232203] sr 3:0:1:0: Attached scsi CD-ROM sr0
[    1.232356] sr 3:0:1:0: Attached scsi generic sg3 type 5
[    1.233220] Freeing unused kernel memory: 872K (c19ae000 - c1a88000)
[    1.233305] Write protecting the kernel text: 6512k
[    1.233492] Write protecting the kernel read-only data: 2756k
[    1.261194] systemd-udevd[106]: starting version 204
[    1.332098] usb 1-4: new high-speed USB device number 4 using ehci-pci
[    1.343549] Floppy drive(s): fd0 is 1.44M
[    1.359945] FDC 0 is a post-1991 82077
[    1.368163] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.368206] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.368516] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[    1.369936] r8169 0000:03:00.0 eth0: RTL8102e at 0xf840e000, 00:30:67:31:4f:77, XID 04a00000 IRQ 43
[    1.465960] usb 1-4: New USB device found, idVendor=0bda, idProduct=8178
[    1.465971] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.465978] usb 1-4: Product: 802.11n WLAN Adapter
[    1.465984] usb 1-4: Manufacturer: Realtek
[    1.465989] usb 1-4: SerialNumber: 00e04c000001
[    1.576076] usb 1-8: new high-speed USB device number 5 using ehci-pci
[    1.699782] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.768047] tsc: Refined TSC clocksource calibration: 2793.314 MHz
[    1.770781] usb 1-8: New USB device found, idVendor=058f, idProduct=3820
[    1.770787] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.770791] usb 1-8: Product: USB 2.0 PC Camera
[    1.770794] usb 1-8: Manufacturer: Alcor Micro, Corp.
[    2.012055] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[    2.132109] usb 2-2: device descriptor read/64, error -71
[    2.344105] random: nonblocking pool is initialized
[    2.413259] usb 2-2: New USB device found, idVendor=13ee, idProduct=0001
[    2.413265] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.413269] usb 2-2: Product: AND
[    2.413273] usb 2-2: Manufacturer: MOON
[    2.413276] usb 2-2: SerialNumber: @\xffffffc9\xffffff8c\xffffff8cAB
[    2.656061] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[    2.768121] Switched to clocksource tsc
[    2.828999] usb 3-1: New USB device found, idVendor=062a, idProduct=0201
[    2.829005] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.829009] usb 3-1: Product: USB-compliant keyboard
[   14.215516] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.492072] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   14.510025] systemd-udevd[274]: starting version 204
[   14.808714] lp: driver loaded but no devices found
[   14.850017] ppdev: user-space parallel port driver
[   15.237206] intel_rng: FWH not detected
[   15.245646] type=1400 audit(1420059909.793:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=355 comm="apparmor_parser"
[   15.245664] type=1400 audit(1420059909.793:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=355 comm="apparmor_parser"
[   15.245679] type=1400 audit(1420059909.793:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=355 comm="apparmor_parser"
[   15.246915] type=1400 audit(1420059909.793:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=355 comm="apparmor_parser"
[   15.246936] type=1400 audit(1420059909.793:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=355 comm="apparmor_parser"
[   15.247633] type=1400 audit(1420059909.793:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=355 comm="apparmor_parser"
[   15.651174] hidraw: raw HID events driver (C) Jiri Kosina
[   15.729431] Linux video capture interface: v2.00
[   15.746754] leds_ss4200: no LED devices found
[   15.805661] [drm] Initialized drm 1.1.0 20060810
[   15.848451] cfg80211: Calling CRDA to update world regulatory domain
[   15.865210] usbcore: registered new interface driver usbhid
[   15.865221] usbhid: USB HID core driver
[   16.137869] uvcvideo: Found UVC 1.00 device USB 2.0 PC Camera (058f:3820)
[   16.193189] input: USB 2.0 PC Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input5
[   16.204095] usbcore: registered new interface driver uvcvideo
[   16.204104] USB Video Class driver (1.1.1)
[   16.270467] wmi: Mapper loaded
[   16.517076] Bluetooth: Core ver 2.17
[   16.518615] NET: Registered protocol family 31
[   16.518625] Bluetooth: HCI device and connection manager initialized
[   16.518642] Bluetooth: HCI socket layer initialized
[   16.518652] Bluetooth: L2CAP socket layer initialized
[   16.518675] Bluetooth: SCO socket layer initialized
[   16.590840] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.590848] Bluetooth: BNEP filters: protocol multicast
[   16.590875] Bluetooth: BNEP socket layer initialized
[   16.611164] type=1400 audit(1420059911.157:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=493 comm="apparmor_parser"
[   16.611182] type=1400 audit(1420059911.157:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=493 comm="apparmor_parser"
[   16.612678] type=1400 audit(1420059911.161:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=493 comm="apparmor_parser"
[   16.623488] Bluetooth: RFCOMM TTY layer initialized
[   16.623511] Bluetooth: RFCOMM socket layer initialized
[   16.623528] Bluetooth: RFCOMM ver 1.11
[   16.878098] checking generic (df000000 130000) vs hw (e0000000 10000000)
[   16.878107] checking generic (df000000 130000) vs hw (de000000 2000000)
[   16.878113] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[   16.878178] Console: switching to colour dummy device 80x25
[   16.945580] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0a8180b1
[   16.945589] nouveau  [  DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
[   16.945595] nouveau  [  DEVICE][0000:01:00.0] Family : NV50
[   17.041524] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   17.044585] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[   17.077927] init: cups main process (509) killed by HUP signal
[   17.077994] init: cups main process ended, respawning
[   17.112768] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[   17.112780] nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
[   17.112956] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[   17.112967] nouveau  [   VBIOS][0000:01:00.0] version 70.18.4f.00.0f
[   17.137933] nouveau 0000:01:00.0: irq 45 for MSI/MSI-X
[   17.137964] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[   17.138032] nouveau W[     PFB][0000:01:00.0][0x00000000][f6ae8c00] reclocking of this ram type unsupported
[   17.138041] nouveau  [     PFB][0000:01:00.0] RAM type: GDDR3
[   17.138047] nouveau  [     PFB][0000:01:00.0] RAM size: 128 MiB
[   17.138052] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 960 tags
[   17.161876] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 900000uv
[   17.208355] SKU: Nid=0x1d sku_cfg=0x4004c601
[   17.208362] SKU: port_connectivity=0x1
[   17.208366] SKU: enable_pcbeep=0x0
[   17.208370] SKU: check_sum=0x00000004
[   17.208374] SKU: customization=0x000000c6
[   17.208378] SKU: external_amp=0x0
[   17.208382] SKU: platform_type=0x0
[   17.208386] SKU: swap=0x0
[   17.208389] SKU: override=0x1
[   17.208666] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   17.208673]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   17.208677]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   17.208681]    mono: mono_out=0x0
[   17.208685]    dig-out=0x1e/0x0
[   17.208688]    inputs:
[   17.208694]      Front Mic=0x19
[   17.208699]      Rear Mic=0x18
[   17.208703]      Line=0x1a
[   17.208709] realtek: No valid SSID, checking pincfg 0x4004c601 for NID 0x1d
[   17.208714] realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0662
[   17.220991] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   17.253145] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   17.253518] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   17.253867] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   17.254209] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   17.908227] gpio_ich: GPIO from 206 to 255 on gpio_ich
[   17.929201] input: MOON AND  as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input11
[   17.930105] hid-generic 0003:13EE:0001.0001: input,hidraw0: USB HID v1.00 Mouse [MOON AND ] on usb-0000:00:1d.0-2/input0
[   17.931396] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input12
[   17.931939] hid-generic 0003:062A:0201.0002: input,hidraw1: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:1d.1-1/input0
[   17.936737] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input13
[   17.940801] hid-generic 0003:062A:0201.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:1d.1-1/input1
[   18.077980] rtl8192cu: Chip version 0x11
[   18.170386] cfg80211: World regulatory domain updated:
[   18.170395] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.170400] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.170405] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.170410] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.170415] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.170419] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.392646] init: failsafe main process (578) killed by TERM signal
[   18.796674] rtl8192cu: MAC address: 08:10:76:d6:fb:6c
[   18.796683] rtl8192cu: Board Type 0
[   18.796919] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[   18.796967] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[   18.797052] usbcore: registered new interface driver rtl8192cu
[   18.935262] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   18.937188] rtlwifi: wireless switch is on
[   19.248646] nouveau  [  PTHERM][0000:01:00.0] FAN control: PWM
[   19.248671] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[   19.248681] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[   19.248725] nouveau  [     CLK][0000:01:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[   19.248740] nouveau  [     CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 405 MHz
[   19.248753] nouveau  [     CLK][0000:01:00.0] 0f: core 520 MHz shader 1230 MHz memory 790 MHz
[   19.248789] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[   19.251242] [TTM] Zone  kernel: Available graphics memory: 442802 kiB
[   19.251250] [TTM] Zone highmem: Available graphics memory: 772406 kiB
[   19.251255] [TTM] Initializing pool allocator
[   19.251270] [TTM] Initializing DMA pool allocator
[   19.251307] nouveau  [     DRM] VRAM: 128 MiB
[   19.251315] nouveau  [     DRM] GART: 1048576 MiB
[   19.251327] nouveau  [     DRM] TMDS table version 2.0
[   19.251335] nouveau  [     DRM] DCB version 4.0
[   19.251343] nouveau  [     DRM] DCB outp 00: 02000300 00000000
[   19.251353] nouveau  [     DRM] DCB outp 01: 01000302 00020030
[   19.251366] nouveau  [     DRM] DCB outp 02: 02011362 00020010
[   19.251373] nouveau  [     DRM] DCB outp 03: 01022310 00000000
[   19.251380] nouveau  [     DRM] DCB conn 00: 00001030
[   19.251389] nouveau  [     DRM] DCB conn 01: 00002161
[   19.251396] nouveau  [     DRM] DCB conn 02: 00000200
[   19.279108] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   19.279117] [drm] No driver support for vblank timestamp query.
[   19.310587] nouveau  [     DRM] MM: using COPY for buffer copies
[   19.361766] nouveau  [     DRM] allocated 1440x900 fb: 0x60000, bo eecc1400
[   19.368392] fbcon: nouveaufb (fb0) is primary device
[   19.445244] Console: switching to colour frame buffer device 180x56
[   19.446575] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[   19.446582] nouveau 0000:01:00.0: registered panic notifier
[   19.446597] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[   19.451148] hda_intel: Disabling MSI
[   19.451173] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   19.451268] hda-intel 0000:01:00.1: Disabling 64bit DMA
[   19.480722] hda-intel 0000:01:00.1: Enable delay in RIRB handling
[   19.731930] type=1400 audit(1420059914.277:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=745 comm="apparmor_parser"
[   19.741271] r8169 0000:03:00.0 eth0: link down
[   19.741505] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.743403] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.775127] rtl8192cu: MAC auto ON okay!
[   19.812333] rtl8192cu: Tx queue select: 0x05
[   20.211135] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.212799] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.254417] audit_printk_skb: 60 callbacks suppressed
[   20.254425] type=1400 audit(1420059914.801:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=762 comm="apparmor_parser"
[   20.254449] type=1400 audit(1420059914.801:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=762 comm="apparmor_parser"
[   20.255150] type=1400 audit(1420059914.801:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=762 comm="apparmor_parser"
[   20.257182] type=1400 audit(1420059914.805:35): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=759 comm="apparmor_parser"
[   20.257212] type=1400 audit(1420059914.805:36): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=759 comm="apparmor_parser"
[   20.257228] type=1400 audit(1420059914.805:37): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=759 comm="apparmor_parser"
[   20.257245] type=1400 audit(1420059914.805:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=759 comm="apparmor_parser"
[   20.257261] type=1400 audit(1420059914.805:39): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=759 comm="apparmor_parser"
[   20.257276] type=1400 audit(1420059914.805:40): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=759 comm="apparmor_parser"
[   20.274599] type=1400 audit(1420059914.821:41): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=759 comm="apparmor_parser"
[   20.464486] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[   20.464887] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[   20.465224] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[   20.465558] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[   23.906820] init: plymouth-upstart-bridge main process ended, respawning
[   23.945884] init: plymouth-upstart-bridge main process ended, respawning
[   46.903372] audit_printk_skb: 60 callbacks suppressed
[   46.903382] type=1400 audit(1420059941.449:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1804 comm="apparmor_parser"
[   46.903404] type=1400 audit(1420059941.449:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1804 comm="apparmor_parser"
[   46.904768] type=1400 audit(1420059941.453:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1804 comm="apparmor_parser"
[   55.839298] systemd-hostnamed[1883]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!



Kod Seç Genişlet

dmesg | tail
[   20.464887] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[   20.465224] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[   20.465558] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[   23.906820] init: plymouth-upstart-bridge main process ended, respawning
[   23.945884] init: plymouth-upstart-bridge main process ended, respawning
[   46.903372] audit_printk_skb: 60 callbacks suppressed
[   46.903382] type=1400 audit(1420059941.449:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1804 comm="apparmor_parser"
[   46.903404] type=1400 audit(1420059941.449:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1804 comm="apparmor_parser"
[   46.904768] type=1400 audit(1420059941.453:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1804 comm="apparmor_parser"
[   55.839298] systemd-hostnamed[1883]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!

Kod Seç Genişlet

uname -r
3.13.0-24-generic


Kod Seç Genişlet

lsb_release -a
lsb_realse: command not found

[heartsmagic]

Bu çıktıları nereden veriyorsun? Bir ağ görünüyor, gerçi kart sorunluymuş. Şunu bir deneyelim bizim forumdaki başlıkta aktarılan sürücüden önce:
https://github.com/pvaret/rtl8192cu-fixes/blob/master/README.md

Bir şekilde internete bağlı olduğunu varsayıyorum.

Kod Seç Genişlet

sudo apt-get install linux-headers-generic build-essential dkms git
git clone https://github.com/pvaret/rtl8192cu-fixes.git
sudo dkms add ./rtl8192cu-fixes
sudo dkms install 8192cu/1.9
sudo depmod -a
sudo cp ./rtl8192cu-fixes/blacklist-native-rtl8192.conf /etc/modprobe.d/

Sonra sistemi yeniden başlatır duruma bakarsın. Fakat, bu işlemleri yaptıktan sonra lütfen tüm çıktıları bir dosyaya kaydet, sorun olursa işimize yarayabilir çünkü.

[road_black]

Ben bu yazdıklarınızı daha önceden yabancı bir forumda bulmuştum zaten ve yinede çalışmadı ayrıca sistemde dil,bazı programlar hala düzgün çalışmıyor. Aşağıdaki resimde kırmızı alanlar bende yok.

[eklenti yönetici tarafından silindi]

[heartsmagic]

Denemiştin ama her şey yolunda gitmiş miydi? Sonuçları görmeden yorum yapamayız ne yazık ki. Evet, cidden her şey yolunda gitmiş ve sürücü iş görmemiş de olabilir. Fakat ya gitmediyse ve senin gözünden kaçtıysa?  Kısacası boşuna kürek çekmeyelim. 

[stajerr]

uyku(suspend) , moduna alıp tekrar dene.

[road_black]

 Sayın heartsmagic yazdıklarınızı deneme imkanım oldu ama işe yaramadı sonlara doğru make error:2 benzeri bi hata aldım ayrıca anldığım kadarıyla sürücü yüklü ama adaptörün üzerindeki ışık sabit...

[Reverser]

wi-fi adaptör bağlantısını çıkarıp tekrar bağlamayı denediniz mi ?

[road_black]

evet denedim ama bir sonuç alamadım

[Reverser]

evet denedim ama bir sonuç alamadım

Şu konuya bir bakın belki sizde işe yarar -> https://forum.ubuntu-tr.net/index.php?topic=45534.0

[road_black]

evet denedim ama bir sonuç alamadım

Şu konuya bir bakın belki sizde işe yarar -> https://forum.ubuntu-tr.net/index.php?topic=45534.0

gösterdiğin konuya baktım ama işe yaramadı bide bu arada belirteyim inca-300n kablosuz alıcısını kullanıyorum forumdaki diğer konularada göz attım ama pek bi işe yaradığını söyleyemem...

[heartsmagic]

Sayın heartsmagic yazdıklarınızı deneme imkanım oldu ama işe yaramadı sonlara doğru make error:2 benzeri bi hata aldım ayrıca anldığım kadarıyla sürücü yüklü ama adaptörün üzerindeki ışık sabit...

Tekrar belirteyim, hataları görmedikçe yorum yapamayız Aldığın hatayı buraya aktarman çok zor değil, kopyala ve yapıştır lütfen. Uyguladığın her adımı buraya aktarabilirsin. Öteki türlü hata oldu, geçelim o aşamayı dersek hiç çözemeyiz meseleyi. Bir görelim bakalım hata nerede, olmadı biz deneriz, baktık olmuyor geçeriz.