[Çözüldü] Asus USB-N14 WiFi adaptör sürücü kurmayı başardım fakat bilgisayar donuyor

[heyyo]

Arkadaşlar merhaba,

Şu başlıktaki, https://forum.ubuntu-tr.net/index.php?topic=43087.msg503907#msg503907, bilgileri de kullanarak ASUS USB-N14 kablosuz adaptörü için sürücüyü kurdum fakat bazı sorunlar yaşıyorum. Aşağıda açıklayacağım gibi, bir şekilde kablosuz ağa bağlanmayı başardım ve ping atabildim. Yalnız bir web sayfasına girmeye çalıştığım anda bilgisayar tamamen kilitleniyor.

Şimdi hikayemi anlatayım.

Yukarıdaki başlıkta tarif edilen şekilde sürücüyü derledim ve "make install" kurdum.

Öncelikle, Network Manager adaptörü listelemiyor. Ama bu büyük bir problem değil. iwconfig ve WiCd adaptörü görüyor. Hatta tarama yapıp kablosuz ağları listeleyebiliyorum. Yalnız bağlantı kuramıyorum. Ağ WPA olduğu için wpa_supplicant kullanmaya çalıştım. Fakat o da olmadı.

Ancak şöyle * bir şey farkettim. Sürücüyü "make install" ile kurduğunuzda /etc/Wireless/RT2870STA.dat diye bir dosya oluşturuyor. Bu dosya kablosuz adaptörün konfigurasyonunu içeriyor. Bu dosyaya kablosuz ağ bilgilerimi girdiğimde başka hiçbir komut girmeden ağa bağlanmayı başardım(sadece "ifconfig ra0 up" komutunu çalıştırmam yeterli). Hatta "dhcpcd ra0" komutuyla IP almayı da başardım. Bunu yaptığımda WiCd arayüzü de, ağa bağlı olduğumu gösteriyor. Bu aşamada birkaç farklı adrese ping atmayı başardım. Ancak bir web sayfasını açmaya çalıştığım anda bilgisayar kilitleniyor. * her şey kilitleniyor, mouse, ekran, klavye vs. Anladığım kadarıyla kernel çöküyor. Sadece reset tuşuyla bilgisayarı yeniden başlatabiliyorum.

Tahminimce wpa_supplicant ile bağlantı kuramamamın sebebi sürücünün, konfigürasyonu .dat dosyasından alması. Ama bunu nasıl engelleyeceğimi bulamadım. Dosyayı silmeyi denedim. Fakat bu defa "ifconfig ra0 up" komutu hata verdi.

Network Manager veya WiCd'nin çalışmasını istiyorum. Yalnız benim ilk önce bu kilitlenme problemini çözmem gerekiyor diye düşünüyorum. Ne tavsiye edersiniz?

Loglar:

~>> cat /etc/lsb-release

Kod Seç Genişlet

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=14.04
DISTRIB_CODENAME=trusty
DISTRIB_DESCRIPTION="Ubuntu 14.04.1 LTS"

~>> uname -a

Kod Seç Genişlet

Linux heyyo-home 3.13.0-39-generic #66-Ubuntu SMP Tue Oct 28 13:30:27 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux

~>> lsusb

Kod Seç Genişlet

Bus 003 Device 002: ID 0b05:17e8 ASUSTek Computer, Inc.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 093a:2700 Pixart Imaging, Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 008: ID 04e8:6864 Samsung Electronics Co., Ltd
Bus 001 Device 004: ID 046d:c52e Logitech, Inc.
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 046d:0a1f Logitech, Inc. G930
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

~>> lsmod

Kod Seç Genişlet

Module                  Size  Used by
rndis_wlan             50281  0
rndis_host             14503  1 rndis_wlan
cdc_ether              14351  1 rndis_host
usbnet                 43913  3 rndis_host,rndis_wlan,cdc_ether
cfg80211              484040  1 rndis_wlan
pci_stub               12622  1
vboxpci                23194  0
vboxnetadp             25670  0
vboxnetflt             27613  0
vboxdrv               339502  3 vboxnetadp,vboxnetflt,vboxpci
vmnet                  56072  12
vmw_vsock_vmci_transport    26278  0
vsock                  34903  1 vmw_vsock_vmci_transport
vmw_vmci               62966  1 vmw_vsock_vmci_transport
vmmon                  80278  0
rfcomm                 69160  4
bnep                   19624  2
bluetooth             391136  10 bnep,rfcomm
binfmt_misc            17468  1
joydev                 17381  0
cdc_acm                28803  0
hid_generic            12548  0
usbhid                 52659  0
hid                   106148  2 hid_generic,usbhid
mxm_wmi                13021  0
snd_hda_codec_hdmi     46368  1
rt5572sta             798515  1
kvm_amd                59987  0
kvm                   451729  1 kvm_amd
uvcvideo               80885  0
videobuf2_vmalloc      13216  1 uvcvideo
snd_usb_audio         153899  3
videobuf2_memops       13362  1 videobuf2_vmalloc
videobuf2_core         40664  1 uvcvideo
snd_usbmidi_lib        29215  1 snd_usb_audio
crct10dif_pclmul       14289  0
videodev              134688  2 uvcvideo,videobuf2_core
crc32_pclmul           13113  0
ghash_clmulni_intel    13216  0
snd_hda_codec_realtek    65580  1
aesni_intel            55624  0
aes_x86_64             17131  1 aesni_intel
lrw                    13286  1 aesni_intel
gf128mul               14951  1 lrw
glue_helper            13990  1 aesni_intel
ablk_helper            13597  1 aesni_intel
cryptd                 20359  3 ghash_clmulni_intel,aesni_intel,ablk_helper
snd_seq_midi           13324  0
snd_seq_midi_event     14899  1 snd_seq_midi
snd_hda_intel          56451  5
edac_core              62291  0
snd_rawmidi            30144  2 snd_usbmidi_lib,snd_seq_midi
fam15h_power           13119  0
serio_raw              13462  0
k10temp                13126  0
edac_mce_amd           22617  0
snd_seq                61560  2 snd_seq_midi_event,snd_seq_midi
snd_hda_codec         192906  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep              13602  2 snd_usb_audio,snd_hda_codec
fglrx                8085343  127
snd_pcm               102099  4 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
sp5100_tco             13979  0
snd_timer              29482  2 snd_pcm,snd_seq
i2c_piix4              22155  0
snd                    69322  29 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
amd_iommu_v2           19054  1 fglrx
soundcore              12680  1 snd
mac_hid                13205  0
wmi                    19177  1 mxm_wmi
parport_pc             32701  0
ppdev                  17671  0
it87                   43113  0
hwmon_vid              12783  1 it87
lp                     17759  0
parport                42348  3 lp,ppdev,parport_pc
pata_acpi              13038  0
firewire_ohci          40409  0
r8169                  67581  0
firewire_core          68769  1 firewire_ohci
ahci                   25819  5
mii                    13934  2 r8169,usbnet
crc_itu_t              12707  1 firewire_core
pata_atiixp            13271  0
libahci                32716  1 ahci

DİKKAT: Aşağıdaki logda usb0 olarak görünen ağ telefondan paylaştığım ağ, kablosuz adaptörün oluşturduğu ağ "ra0".

~>> ifconfig

Kod Seç Genişlet

eth0      Link encap:Ethernet  HWaddr 50:e5:49:5f:1c:3a
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:19765 errors:0 dropped:0 overruns:0 frame:0
          TX packets:19765 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2607638 (2.6 MB)  TX bytes:2607638 (2.6 MB)

ra0       Link encap:Ethernet  HWaddr e0:3f:49:eb:84:73
          inet6 addr: fe80::e23f:49ff:feeb:8473/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:29534 errors:0 dropped:0 overruns:423 frame:423
          TX packets:14936 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:7176341 (7.1 MB)  TX bytes:1554114 (1.5 MB)

usb0      Link encap:Ethernet  HWaddr 8e:3f:d7:77:63:66
          inet addr:192.168.42.8  Bcast:192.168.42.255  Mask:255.255.255.0
          inet6 addr: fe80::8c3f:d7ff:fe77:6366/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:28599 errors:3 dropped:0 overruns:0 frame:3
          TX packets:42360 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:9572438 (9.5 MB)  TX bytes:40091231 (40.0 MB)

vmnet1    Link encap:Ethernet  HWaddr 00:50:56:c0:00:01
          inet addr:192.168.69.1  Bcast:192.168.69.255  Mask:255.255.255.0
          inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:282 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

vmnet8    Link encap:Ethernet  HWaddr 00:50:56:c0:00:08
          inet addr:192.168.122.1  Bcast:192.168.122.255  Mask:255.255.255.0
          inet6 addr: fe80::250:56ff:fec0:8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:283 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

".dat" dosyasına ağ bilgilerimi girmeden önce

~>> iwconfig

Kod Seç Genişlet

usb0      no wireless extensions.

ra0       Ralink STA  ESSID:""  Nickname:"RT2870STA"
          Mode:Auto  Frequency=2.412 GHz  Bit Rate=1 Mb/s
          RTS thr:off   Fragment thr:off
          Link Quality=70/100  Signal level:-54 dBm  Noise level:-54 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

vmnet8    no wireless extensions.

eth0      no wireless extensions.

lo        no wireless extensions.

vmnet1    no wireless extensions.

".dat" dosyasına ağ bilgilerimi girdikten sonra

~>> iwconfig

Kod Seç Genişlet

usb0      no wireless extensions.

ra0       Ralink STA  ESSID:"SONY"  Nickname:"RT2870STA"
          Mode:Managed  Frequency=2.412 GHz  Access Point: 64:70:02:BB:92:D3
          Bit Rate=54 Mb/s
          RTS thr:off   Fragment thr:off
          Link Quality=100/100  Signal level:-46 dBm  Noise level:-52 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

vmnet8    no wireless extensions.

eth0      no wireless extensions.

lo        no wireless extensions.

vmnet1    no wireless extensions.

Bağlanmak istediğim ağın adı "SONY".

~>> iwlist ra0 scan

Kod Seç Genişlet

ra0       Scan completed :
          Cell 01 - Address: 64:70:02:BB:92:D3
                    Protocol:802.11b/g/n
                    ESSID:"SONY"
                    Mode:Managed
                    Frequency:2.412 GHz (Channel 1)
                    Quality=100/100  Signal level=-45 dBm  Noise level=-92 dBm
                    Encryption key:on
                    Bit Rates:54 Mb/s
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
          Cell 02 - Address: 5C:F4:AB:DA:72:B3
                    Protocol:802.11b/g/n
                    ESSID:"serkankinali"
                    Mode:Managed
                    Frequency:2.422 GHz (Channel 3)
                    Quality=7/100  Signal level=-87 dBm  Noise level=-82 dBm
                    Encryption key:on
                    Bit Rates:144 Mb/s
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD0E0050F204104A0001101044000102
          Cell 03 - Address: 74:EA:3A:B7:75:C4
                    Protocol:802.11b/g
                    ESSID:"YIRTAR_61"
                    Mode:Managed
                    Frequency:2.437 GHz (Channel 6)
                    Quality=100/100  Signal level=-49 dBm  Noise level=-92 dBm
                    Encryption key:on
                    Bit Rates:54 Mb/s
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
          Cell 04 - Address: 74:EA:3A:B7:75:C5
                    Protocol:802.11b/g
                    ESSID:""
                    Mode:Managed
                    Frequency:2.437 GHz (Channel 6)
                    Quality=100/100  Signal level=-49 dBm  Noise level=-92 dBm
                    Encryption key:off
                    Bit Rates:54 Mb/s
          Cell 05 - Address: 74:EA:3A:B7:75:C6
                    Protocol:802.11b/g
                    ESSID:""
                    Mode:Managed
                    Frequency:2.437 GHz (Channel 6)
                    Quality=99/100  Signal level=-51 dBm  Noise level=-92 dBm
                    Encryption key:off
                    Bit Rates:54 Mb/s
          Cell 06 - Address: 74:EA:3A:B7:75:C7
                    Protocol:802.11b/g
                    ESSID:""
                    Mode:Managed
                    Frequency:2.437 GHz (Channel 6)
                    Quality=100/100  Signal level=-49 dBm  Noise level=-92 dBm
                    Encryption key:off
                    Bit Rates:54 Mb/s
          Cell 07 - Address: C0:4A:00:0F:0A:F5
                    Protocol:802.11b/g/n
                    ESSID:"erdemeskin"
                    Mode:Managed
                    Frequency:2.472 GHz (Channel 13)
                    Quality=0/100  Signal level=-91 dBm  Noise level=-86 dBm
                    Encryption key:on
                    Bit Rates:150 Mb/s
                    IE: WPA Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD270050F204104A000100104400010210470010BC329E001DD811B28601C04A000F0AF5103C000101

/etc/Wireless/RT2870STA.dat dosyası. Sadece şu parametleri değiştirdim: SSID, AuthMode, EncrypType, WPAPSK.

Kod Seç Genişlet

#The word of "Default" must not be removed
Default
CountryRegion=5
CountryRegionABand=7
CountryCode=
ChannelGeography=1
SSID=SONY
NetworkType=Infra
WirelessMode=5
Channel=0
BeaconPeriod=100
TxPower=100
BGProtection=0
TxPreamble=0
RTSThreshold=2347
FragThreshold=2346
TxBurst=1
PktAggregate=0
WmmCapable=1
AckPolicy=0;0;0;0
AuthMode=WPA2PSK
EncrypType=TKIP
WPAPSK=***KABLOSUZ AĞ ŞİFRESİ***
DefaultKeyID=1
Key1Type=0
Key1Str=
Key2Type=0
Key2Str=
Key3Type=0
Key3Str=
Key4Type=0
Key4Str=
PSMode=CAM
AutoRoaming=0
RoamThreshold=70
APSDCapable=0
APSDAC=0;0;0;0
HT_RDG=1
HT_EXTCHA=0
HT_OpMode=0
HT_MpduDensity=4
HT_BW=1
HT_BADecline=0
HT_AutoBA=1
HT_AMSDU=0
HT_BAWinSize=64
HT_GI=1
HT_MCS=33
HT_MIMOPSMode=3
HT_DisallowTKIP=1
HT_STBC=0
EthConvertMode=
EthCloneMac=
IEEE80211H=0
TGnWifiTest=0
WirelessEvent=0
MeshId=MESH
MeshAutoLink=1
MeshAuthMode=OPEN
MeshEncrypType=NONE
MeshWPAKEY=
MeshDefaultkey=1
MeshWEPKEY=
CarrierDetect=0
AntDiversity=0
BeaconLostTime=4
FtSupport=0
Wapiifname=ra0
WapiPsk=
WapiPskType=
WapiUserCertPath=
WapiAsCertPath=
PSP_XLINK_MODE=0
WscManufacturer=
WscModelName=
WscDeviceName=
WscModelNumber=
WscSerialNumber=
RadioOn=1
WIDIEnable=0
P2P_L2SD_SCAN_TOGGLE=8
Wsc4digitPinCode=0
P2P_WIDIEnable=0
PMFMFPC=0
PMFMFPR=0
PMFSHA256=0

~>> dmesg

Kod Seç Genişlet

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-39-generic (buildd@toyol) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #66-Ubuntu SMP Tue Oct 28 13:30:27 UTC 2014 (Ubuntu 3.13.0-39.66-generic 3.13.11.8)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-39-generic root=UUID=b1b485de-96b9-49c4-b70f-394b32b430d2 ro quiet splash radeon.dpm=1 vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfd9ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cfda0000-0x00000000cfdd0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfdd1000-0x00000000cfdfffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. GA-990FXA-UD3/GA-990FXA-UD3, BIOS F4 08/31/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 base 0000CFE00000 mask FFFFFFE00000 uncachable
[    0.000000]   4 base 000100000000 mask FFFFE0000000 write-back
[    0.000000]   5 base 000120000000 mask FFFFF0000000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000130000000 aka 4864M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[    0.000000] reg 4, base: 4GB, range: 512MB, type WB
[    0.000000] reg 5, base: 4608MB, range: 256MB, type WB
[    0.000000] total RAM covered: 3326M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 4M num_reg: 4  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[    0.000000] e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcfda0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f4b50-0x000f4b5f] mapped at [ffff8800000f4b50]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[    0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[    0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[    0.000000]  [mem 0x12fe00000-0x12fffffff] page 2M
[    0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
[    0.000000]  [mem 0x12c000000-0x12fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
[    0.000000]  [mem 0x100000000-0x12bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xcfd9ffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xcfbfffff] page 2M
[    0.000000]  [mem 0xcfc00000-0xcfd9ffff] page 4k
[    0.000000] RAMDISK: [mem 0x35b56000-0x36da2fff]
[    0.000000] ACPI: RSDP 00000000000f6a70 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 00000000cfdd1000 000048 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 00000000cfdd1080 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 00000000cfdd1100 007997 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 00000000cfda0000 000040
[    0.000000] ACPI: MSDM 00000000cfdd8b80 000055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: HPET 00000000cfdd8c00 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 00000000cfdd8c40 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: MATS 00000000cfdd8cc0 000034 (v01 GBT             00000000      00000000)
[    0.000000] ACPI: TAMG 00000000cfdd8d30 000202 (v01 GBT    GBT   B0 5455312E BG?? 53450101)
[    0.000000] ACPI: APIC 00000000cfdd8ac0 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: MATS 00000000cfdd8f40 00648F (v01        MATS RCM 80000001 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000cfddf440 001714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
[    0.000000]   NODE_DATA [mem 0x12fff9000-0x12fffdfff]
[    0.000000]  [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x12fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xcfd9ffff]
[    0.000000]   node   0: [mem 0x100000000-0x12fffffff]
[    0.000000] On node 0 totalpages: 1047870
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13239 pages used for memmap
[    0.000000]   DMA32 zone: 847264 pages, LIFO batch:31
[    0.000000]   Normal zone: 3072 pages used for memmap
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfda0000-0xcfdd0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfdd1000-0xcfdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xcfefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88012fc00000 s86400 r8192 d24192 u262144
[    0.000000] pcpu-alloc: s86400 r8192 d24192 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031474
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-39-generic root=UUID=b1b485de-96b9-49c4-b70f-394b32b430d2 ro quiet splash radeon.dpm=1 vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ c4000000 size 32 MB
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[    0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[    0.000000] Memory: 3958044K/4191480K available (7375K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 233436K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] Offload RCU callbacks from all CPUs
[    0.000000] Offload RCU callbacks from CPUs: 0-7.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 4027.000 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 8054.00 BogoMIPS (lpj=16108000)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000031] Security Framework initialized
[    0.000048] AppArmor: AppArmor initialized
[    0.000049] Yama: becoming mindful.
[    0.000333] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001369] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001828] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.001834] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.002008] Initializing cgroup subsys memory
[    0.002014] Initializing cgroup subsys devices
[    0.002015] Initializing cgroup subsys freezer
[    0.002017] Initializing cgroup subsys blkio
[    0.002018] Initializing cgroup subsys perf_event
[    0.002021] Initializing cgroup subsys hugetlb
[    0.002038] tseg: 00cff00000
[    0.002040] CPU: Physical Processor ID: 0
[    0.002040] CPU: Processor Core ID: 0
[    0.002042] mce: CPU supports 7 MCE banks
[    0.002047] LVT offset 1 assigned for vector 0xf9
[    0.002052] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.002052] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.002052] tlb_flushall_shift: 5
[    0.002130] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[    0.002821] ACPI: Core revision 20131115
[    0.004623] ACPI: All ACPI Tables successfully acquired
[    0.065396] ftrace: allocating 28541 entries in 112 pages
[    2.257756] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    2.297397] smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
[    2.401363] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    2.401367] ... version:                0
[    2.401368] ... bit width:              48
[    2.401369] ... generic registers:      6
[    2.401370] ... value mask:             0000ffffffffffff
[    2.401371] ... max period:             00007fffffffffff
[    2.401372] ... fixed-purpose events:   0
[    2.401373] ... event mask:             000000000000003f
[    2.402787] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    2.402845] x86: Booting SMP configuration:
[    2.402846] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    2.494743] x86: Booted up 1 node, 8 CPUs
[    2.494747] smpboot: Total of 8 processors activated (64432.00 BogoMIPS)
[    2.503902] devtmpfs: initialized
[    2.506075] EVM: security.selinux
[    2.506076] EVM: security.SMACK64
[    2.506077] EVM: security.ima
[    2.506078] EVM: security.capability
[    2.506138] PM: Registering ACPI NVS region [mem 0xcfda0000-0xcfdd0fff] (200704 bytes)
[    2.506874] pinctrl core: initialized pinctrl subsystem
[    2.506922] regulator-dummy: no parameters
[    2.506943] RTC time: 13:10:00, date: 12/14/14
[    2.506974] NET: Registered protocol family 16
[    2.507076] cpuidle: using governor ladder
[    2.507077] cpuidle: using governor menu
[    2.507136] ACPI: bus type PCI registered
[    2.507138] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    2.507184] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    2.507186] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    2.515931] PCI: Using configuration type 1 for base access
[    2.516911] bio: create slab <bio-0> at 0
[    2.517070] ACPI: Added _OSI(Module Device)
[    2.517072] ACPI: Added _OSI(Processor Device)
[    2.517073] ACPI: Added _OSI(3.0 _SCP Extensions)
[    2.517074] ACPI: Added _OSI(Processor Aggregator Device)
[    2.525091] ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0x45, should be 0x44 (20131115/tbprint-214)
[    2.525234] ACPI: Interpreter enabled
[    2.525240] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    2.525243] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    2.525256] ACPI: (supports S0 S3 S4 S5)
[    2.525258] ACPI: Using IOAPIC for interrupt routing
[    2.525282] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    2.525391] ACPI: No dock devices found.
[    2.572224] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    2.572229] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    2.572233] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    2.572522] PCI host bridge to bus 0000:00
[    2.572525] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.572527] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    2.572528] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    2.572530] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    2.572531] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    2.572533] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    2.572534] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
[    2.572545] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[    2.572556] pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
[    2.572661] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[    2.572691] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    2.572745] pci 0000:00:02.0: System wakeup disabled by ACPI
[    2.572774] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[    2.572803] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    2.572855] pci 0000:00:09.0: System wakeup disabled by ACPI
[    2.572883] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[    2.572912] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    2.572963] pci 0000:00:0a.0: System wakeup disabled by ACPI
[    2.572996] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[    2.573010] pci 0000:00:11.0: reg 0x10: [io  0xff00-0xff07]
[    2.573017] pci 0000:00:11.0: reg 0x14: [io  0xfe00-0xfe03]
[    2.573024] pci 0000:00:11.0: reg 0x18: [io  0xfd00-0xfd07]
[    2.573031] pci 0000:00:11.0: reg 0x1c: [io  0xfc00-0xfc03]
[    2.573038] pci 0000:00:11.0: reg 0x20: [io  0xfb00-0xfb0f]
[    2.573045] pci 0000:00:11.0: reg 0x24: [mem 0xfdfff000-0xfdfff3ff]
[    2.573059] pci 0000:00:11.0: set SATA to AHCI mode
[    2.573152] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    2.573162] pci 0000:00:12.0: reg 0x10: [mem 0xfdffe000-0xfdffefff]
[    2.573249] pci 0000:00:12.0: System wakeup disabled by ACPI
[    2.573279] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    2.573294] pci 0000:00:12.2: reg 0x10: [mem 0xfdffd000-0xfdffd0ff]
[    2.573354] pci 0000:00:12.2: supports D1 D2
[    2.573355] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    2.573408] pci 0000:00:12.2: System wakeup disabled by ACPI
[    2.573434] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    2.573444] pci 0000:00:13.0: reg 0x10: [mem 0xfdffc000-0xfdffcfff]
[    2.573531] pci 0000:00:13.0: System wakeup disabled by ACPI
[    2.573559] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    2.573573] pci 0000:00:13.2: reg 0x10: [mem 0xfdffb000-0xfdffb0ff]
[    2.573635] pci 0000:00:13.2: supports D1 D2
[    2.573636] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    2.573689] pci 0000:00:13.2: System wakeup disabled by ACPI
[    2.573716] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    2.573825] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    2.573835] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
[    2.573842] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
[    2.573849] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
[    2.573855] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
[    2.573862] pci 0000:00:14.1: reg 0x20: [io  0xfa00-0xfa0f]
[    2.573946] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    2.573962] pci 0000:00:14.2: reg 0x10: [mem 0xfdff4000-0xfdff7fff 64bit]
[    2.574010] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    2.574061] pci 0000:00:14.2: System wakeup disabled by ACPI
[    2.574084] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    2.574196] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    2.574267] pci 0000:00:14.4: System wakeup disabled by ACPI
[    2.574289] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    2.574299] pci 0000:00:14.5: reg 0x10: [mem 0xfdffa000-0xfdffafff]
[    2.574386] pci 0000:00:14.5: System wakeup disabled by ACPI
[    2.574413] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    2.574465] pci 0000:00:15.0: supports D1 D2
[    2.574521] pci 0000:00:15.0: System wakeup disabled by ACPI
[    2.574546] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[    2.574598] pci 0000:00:15.1: supports D1 D2
[    2.574652] pci 0000:00:15.1: System wakeup disabled by ACPI
[    2.574677] pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
[    2.574729] pci 0000:00:15.2: supports D1 D2
[    2.574783] pci 0000:00:15.2: System wakeup disabled by ACPI
[    2.574809] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
[    2.574860] pci 0000:00:15.3: supports D1 D2
[    2.574917] pci 0000:00:15.3: System wakeup disabled by ACPI
[    2.574944] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    2.574954] pci 0000:00:16.0: reg 0x10: [mem 0xfdff9000-0xfdff9fff]
[    2.575041] pci 0000:00:16.0: System wakeup disabled by ACPI
[    2.575075] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    2.575088] pci 0000:00:16.2: reg 0x10: [mem 0xfdff8000-0xfdff80ff]
[    2.575149] pci 0000:00:16.2: supports D1 D2
[    2.575150] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    2.575203] pci 0000:00:16.2: System wakeup disabled by ACPI
[    2.575229] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    2.575301] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    2.575369] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    2.575437] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    2.575507] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    2.575574] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    2.575684] pci 0000:01:00.0: [1002:6739] type 00 class 0x030000
[    2.575697] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    2.575707] pci 0000:01:00.0: reg 0x18: [mem 0xfddc0000-0xfdddffff 64bit]
[    2.575714] pci 0000:01:00.0: reg 0x20: [io  0xee00-0xeeff]
[    2.575727] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    2.575759] pci 0000:01:00.0: supports D1 D2
[    2.575801] pci 0000:01:00.1: [1002:aa88] type 00 class 0x040300
[    2.575814] pci 0000:01:00.1: reg 0x10: [mem 0xfddfc000-0xfddfffff 64bit]
[    2.575874] pci 0000:01:00.1: supports D1 D2
[    2.581276] pci 0000:00:02.0: PCI bridge to [bus 01]
[    2.581281] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    2.581283] pci 0000:00:02.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    2.581286] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    2.581328] pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
[    2.581342] pci 0000:02:00.0: reg 0x10: [mem 0xfdaf8000-0xfdafffff 64bit]
[    2.581405] pci 0000:02:00.0: supports D1 D2
[    2.581407] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.589271] pci 0000:00:09.0: PCI bridge to [bus 02]
[    2.589276] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
[    2.589278] pci 0000:00:09.0:   bridge window [mem 0xfda00000-0xfdafffff]
[    2.589281] pci 0000:00:09.0:   bridge window [mem 0xfd100000-0xfd1fffff 64bit pref]
[    2.589322] pci 0000:03:00.0: [1b4b:917a] type 00 class 0x01018f
[    2.589331] pci 0000:03:00.0: reg 0x10: [io  0xcf00-0xcf07]
[    2.589337] pci 0000:03:00.0: reg 0x14: [io  0xce00-0xce03]
[    2.589343] pci 0000:03:00.0: reg 0x18: [io  0xcd00-0xcd07]
[    2.589349] pci 0000:03:00.0: reg 0x1c: [io  0xcc00-0xcc03]
[    2.589355] pci 0000:03:00.0: reg 0x20: [io  0xcb00-0xcb0f]
[    2.589361] pci 0000:03:00.0: reg 0x24: [mem 0xfd0ff000-0xfd0ff1ff]
[    2.589368] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    2.589396] pci 0000:03:00.0: PME# supported from D3hot
[    2.597265] pci 0000:00:0a.0: PCI bridge to [bus 03]
[    2.597268] pci 0000:00:0a.0:   bridge window [io  0xc000-0xcfff]
[    2.597271] pci 0000:00:0a.0:   bridge window [mem 0xfd000000-0xfd0fffff]
[    2.597274] pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[    2.597323] pci 0000:04:0e.0: [1106:3044] type 00 class 0x0c0010
[    2.597341] pci 0000:04:0e.0: reg 0x10: [mem 0xfdcff000-0xfdcff7ff]
[    2.597351] pci 0000:04:0e.0: reg 0x14: [io  0xbf00-0xbf7f]
[    2.597426] pci 0000:04:0e.0: supports D2
[    2.597427] pci 0000:04:0e.0: PME# supported from D2 D3hot D3cold
[    2.597475] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[    2.597478] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
[    2.597481] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    2.597484] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff pref]
[    2.597486] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    2.597488] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    2.597489] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    2.597490] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    2.597492] pci 0000:00:14.4:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    2.597493] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
[    2.597550] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[    2.597564] pci 0000:05:00.0: reg 0x10: [io  0xae00-0xaeff]
[    2.597591] pci 0000:05:00.0: reg 0x18: [mem 0xfd8ff000-0xfd8fffff 64bit pref]
[    2.597607] pci 0000:05:00.0: reg 0x20: [mem 0xfd8f8000-0xfd8fbfff 64bit pref]
[    2.597673] pci 0000:05:00.0: supports D1 D2
[    2.597674] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.605265] pci 0000:00:15.0: PCI bridge to [bus 05]
[    2.605269] pci 0000:00:15.0:   bridge window [io  0xa000-0xafff]
[    2.605272] pci 0000:00:15.0:   bridge window [mem 0xfd900000-0xfd9fffff]
[    2.605276] pci 0000:00:15.0:   bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[    2.605335] pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
[    2.605354] pci 0000:06:00.0: reg 0x10: [mem 0xfd7f8000-0xfd7fffff 64bit]
[    2.605442] pci 0000:06:00.0: supports D1 D2
[    2.605443] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.613260] pci 0000:00:15.1: PCI bridge to [bus 06]
[    2.613265] pci 0000:00:15.1:   bridge window [io  0x9000-0x9fff]
[    2.613268] pci 0000:00:15.1:   bridge window [mem 0xfd700000-0xfd7fffff]
[    2.613272] pci 0000:00:15.1:   bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[    2.613317] pci 0000:00:15.2: PCI bridge to [bus 07]
[    2.613321] pci 0000:00:15.2:   bridge window [io  0x8000-0x8fff]
[    2.613323] pci 0000:00:15.2:   bridge window [mem 0xfd500000-0xfd5fffff]
[    2.613327] pci 0000:00:15.2:   bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
[    2.613367] pci 0000:00:15.3: PCI bridge to [bus 08]
[    2.613371] pci 0000:00:15.3:   bridge window [io  0x7000-0x7fff]
[    2.613374] pci 0000:00:15.3:   bridge window [mem 0xfd300000-0xfd3fffff]
[    2.613377] pci 0000:00:15.3:   bridge window [mem 0xfd200000-0xfd2fffff 64bit pref]
[    2.629347] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
[    2.629395] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
[    2.629441] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
[    2.629487] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
[    2.629532] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
[    2.629578] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
[    2.629623] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
[    2.629668] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
[    2.630084] ACPI: \_SB_.PCI0: notify handler is installed
[    2.630115] Found 1 acpi root devices
[    2.630211] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    2.630213] vgaarb: loaded
[    2.630214] vgaarb: bridge control possible 0000:01:00.0
[    2.630364] SCSI subsystem initialized
[    2.630424] libata version 3.00 loaded.
[    2.630442] ACPI: bus type USB registered
[    2.630455] usbcore: registered new interface driver usbfs
[    2.630461] usbcore: registered new interface driver hub
[    2.630480] usbcore: registered new device driver usb
[    2.630584] PCI: Using ACPI for IRQ routing
[    2.636612] PCI: pci_cache_line_size set to 64 bytes
[    2.636620] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[    2.636677] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    2.636679] e820: reserve RAM buffer [mem 0xcfda0000-0xcfffffff]
[    2.636747] NetLabel: Initializing
[    2.636748] NetLabel:  domain hash size = 128
[    2.636749] NetLabel:  protocols = UNLABELED CIPSOv4
[    2.636759] NetLabel:  unlabeled traffic allowed by default
[    2.636817] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    2.636820] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    2.638883] Switched to clocksource hpet
[    2.644154] AppArmor: AppArmor Filesystem Enabled
[    2.644167] pnp: PnP ACPI init
[    2.644175] ACPI: bus type PNP registered
[    2.644245] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    2.644247] system 00:00: [io  0x0220-0x0225] has been reserved
[    2.644249] system 00:00: [io  0x0290-0x0294] has been reserved
[    2.644252] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.658974] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    2.658998] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    2.659004] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[    2.659028] system 00:01: [io  0x0900-0x091f] has been reserved
[    2.659030] system 00:01: [io  0x0228-0x022f] has been reserved
[    2.659032] system 00:01: [io  0x040b] has been reserved
[    2.659033] system 00:01: [io  0x04d6] has been reserved
[    2.659035] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    2.659036] system 00:01: [io  0x0c14] has been reserved
[    2.659038] system 00:01: [io  0x0c50-0x0c52] has been reserved
[    2.659039] system 00:01: [io  0x0c6c-0x0c6d] has been reserved
[    2.659041] system 00:01: [io  0x0c6f] has been reserved
[    2.659042] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    2.659043] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    2.659045] system 00:01: [io  0x0cd4-0x0cdf] has been reserved
[    2.659047] system 00:01: [io  0x0800-0x08fe] could not be reserved
[    2.659048] system 00:01: [io  0x0a10-0x0a17] has been reserved
[    2.659050] system 00:01: [io  0x0b00-0x0b0f] has been reserved
[    2.659051] system 00:01: [io  0x0b10-0x0b1f] has been reserved
[    2.659053] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    2.659055] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[    2.659057] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.659147] pnp 00:02: [dma 4]
[    2.659163] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    2.659226] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    2.659264] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    2.659282] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    2.659303] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    2.659587] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    2.659665] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    2.659667] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.659786] pnp 00:09: disabling [mem 0x000f0000-0x000f3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    2.659788] pnp 00:09: disabling [mem 0x000f4000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    2.659790] pnp 00:09: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    2.659792] pnp 00:09: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    2.659794] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    2.659796] pnp 00:09: disabling [mem 0x00100000-0xcfd9ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    2.659834] system 00:09: [mem 0xcfda0000-0xcfdfffff] could not be reserved
[    2.659836] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
[    2.659838] system 00:09: [mem 0xcfe00000-0xcfefffff] has been reserved
[    2.659839] system 00:09: [mem 0xcff00000-0xcfffffff] could not be reserved
[    2.659841] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[    2.659843] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
[    2.659844] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
[    2.659846] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    2.659862] pnp: PnP ACPI: found 10 devices
[    2.659863] ACPI: bus type PNP unregistered
[    2.665964] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
[    2.665966] pci 0000:00:02.0: PCI bridge to [bus 01]
[    2.665968] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    2.665971] pci 0000:00:02.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    2.665973] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    2.665976] pci 0000:00:09.0: PCI bridge to [bus 02]
[    2.665978] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
[    2.665980] pci 0000:00:09.0:   bridge window [mem 0xfda00000-0xfdafffff]
[    2.665982] pci 0000:00:09.0:   bridge window [mem 0xfd100000-0xfd1fffff 64bit pref]
[    2.665986] pci 0000:03:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref]
[    2.665987] pci 0000:00:0a.0: PCI bridge to [bus 03]
[    2.665989] pci 0000:00:0a.0:   bridge window [io  0xc000-0xcfff]
[    2.665991] pci 0000:00:0a.0:   bridge window [mem 0xfd000000-0xfd0fffff]
[    2.665993] pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[    2.665996] pci 0000:00:14.4: PCI bridge to [bus 04]
[    2.665998] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
[    2.666002] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    2.666005] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff pref]
[    2.666009] pci 0000:00:15.0: PCI bridge to [bus 05]
[    2.666011] pci 0000:00:15.0:   bridge window [io  0xa000-0xafff]
[    2.666014] pci 0000:00:15.0:   bridge window [mem 0xfd900000-0xfd9fffff]
[    2.666017] pci 0000:00:15.0:   bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[    2.666020] pci 0000:00:15.1: PCI bridge to [bus 06]
[    2.666022] pci 0000:00:15.1:   bridge window [io  0x9000-0x9fff]
[    2.666025] pci 0000:00:15.1:   bridge window [mem 0xfd700000-0xfd7fffff]
[    2.666028] pci 0000:00:15.1:   bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[    2.666032] pci 0000:00:15.2: PCI bridge to [bus 07]
[    2.666034] pci 0000:00:15.2:   bridge window [io  0x8000-0x8fff]
[    2.666037] pci 0000:00:15.2:   bridge window [mem 0xfd500000-0xfd5fffff]
[    2.666039] pci 0000:00:15.2:   bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
[    2.666043] pci 0000:00:15.3: PCI bridge to [bus 08]
[    2.666045] pci 0000:00:15.3:   bridge window [io  0x7000-0x7fff]
[    2.666048] pci 0000:00:15.3:   bridge window [mem 0xfd300000-0xfd3fffff]
[    2.666050] pci 0000:00:15.3:   bridge window [mem 0xfd200000-0xfd2fffff 64bit pref]
[    2.666055] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    2.666056] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    2.666057] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    2.666059] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    2.666060] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    2.666062] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfebfffff]
[    2.666063] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    2.666064] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
[    2.666066] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    2.666067] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    2.666069] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff]
[    2.666070] pci_bus 0000:02: resource 2 [mem 0xfd100000-0xfd1fffff 64bit pref]
[    2.666072] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    2.666073] pci_bus 0000:03: resource 1 [mem 0xfd000000-0xfd0fffff]
[    2.666074] pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[    2.666076] pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
[    2.666077] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
[    2.666078] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref]
[    2.666080] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    2.666081] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    2.666082] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    2.666084] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[    2.666085] pci_bus 0000:04: resource 8 [mem 0xfed40000-0xfed44fff]
[    2.666087] pci_bus 0000:04: resource 9 [mem 0xd0000000-0xfebfffff]
[    2.666088] pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
[    2.666089] pci_bus 0000:05: resource 1 [mem 0xfd900000-0xfd9fffff]
[    2.666091] pci_bus 0000:05: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
[    2.666092] pci_bus 0000:06: resource 0 [io  0x9000-0x9fff]
[    2.666093] pci_bus 0000:06: resource 1 [mem 0xfd700000-0xfd7fffff]
[    2.666095] pci_bus 0000:06: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
[    2.666096] pci_bus 0000:07: resource 0 [io  0x8000-0x8fff]
[    2.666097] pci_bus 0000:07: resource 1 [mem 0xfd500000-0xfd5fffff]
[    2.666099] pci_bus 0000:07: resource 2 [mem 0xfd400000-0xfd4fffff 64bit pref]
[    2.666100] pci_bus 0000:08: resource 0 [io  0x7000-0x7fff]
[    2.666101] pci_bus 0000:08: resource 1 [mem 0xfd300000-0xfd3fffff]
[    2.666103] pci_bus 0000:08: resource 2 [mem 0xfd200000-0xfd2fffff 64bit pref]
[    2.666124] NET: Registered protocol family 2
[    2.666285] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    2.666370] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    2.666454] TCP: Hash tables configured (established 32768 bind 32768)
[    2.666475] TCP: reno registered
[    2.666481] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    2.666500] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    2.666557] NET: Registered protocol family 1
[    2.954950] pci 0000:01:00.0: Boot video device
[    2.955318] PCI: CLS 64 bytes, default 64
[    2.955377] Trying to unpack rootfs image as initramfs...
[    3.184554] Freeing initrd memory: 18740K (ffff880035b56000 - ffff880036da3000)
[    3.184864] PCI-DMA: Disabling AGP.
[    3.184940] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    3.184941] PCI-DMA: using GART IOMMU.
[    3.184943] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    3.188795] perf: AMD NB counters detected
[    3.188825] LVT offset 0 assigned for vector 0x400
[    3.188848] perf: AMD IBS detected (0x000000ff)
[    3.188883] microcode: CPU0: patch_level=0x00000000
[    3.188891] microcode: CPU1: patch_level=0x00000000
[    3.188900] microcode: CPU2: patch_level=0x00000000
[    3.188907] microcode: CPU3: patch_level=0x00000000
[    3.188912] microcode: CPU4: patch_level=0x00000000
[    3.188921] microcode: CPU5: patch_level=0x00000000
[    3.188928] microcode: CPU6: patch_level=0x00000000
[    3.188934] microcode: CPU7: patch_level=0x00000000
[    3.188978] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    3.188980] Scanning for low memory corruption every 60 seconds
[    3.189222] Initialise system trusted keyring
[    3.189257] audit: initializing netlink socket (disabled)
[    3.189266] type=2000 audit(1418562597.844:1): initialized
[    3.208948] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    3.209932] zbud: loaded
[    3.210030] VFS: Disk quotas dquot_6.5.2
[    3.210062] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.210455] fuse init (API version 7.22)
[    3.210514] msgmni has been set to 7896
[    3.210556] Key type big_key registered
[    3.210956] Key type asymmetric registered
[    3.210957] Asymmetric key parser 'x509' registered
[    3.210980] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    3.211024] io scheduler noop registered
[    3.211025] io scheduler deadline registered (default)
[    3.211045] io scheduler cfq registered
[    3.211916] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    3.211928] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    3.211960] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[    3.211961] vesafb: scrolling: redraw
[    3.211962] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    3.212175] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 5824k, total 5824k
[    3.241642] Console: switching to colour frame buffer device 175x65
[    3.270909] fb0: VESA VGA frame buffer device
[    3.270924] ipmi message handler version 39.2
[    3.270968] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    3.270972] ACPI: Power Button [PWRB]
[    3.271001] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    3.271003] ACPI: Power Button [PWRF]
[    3.271036] ACPI: acpi_idle registered with cpuidle
[    3.271307] GHES: HEST is not enabled!
[    3.271383] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    3.291710] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.292950] Linux agpgart interface v0.103
[    3.294061] brd: module loaded
[    3.294634] loop: module loaded
[    3.294954] libphy: Fixed MDIO Bus: probed
[    3.295025] tun: Universal TUN/TAP device driver, 1.6
[    3.295026] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    3.295064] PPP generic driver version 2.4.2
[    3.295103] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.295105] ehci-pci: EHCI PCI platform driver
[    3.295253] QUIRK: Enable AMD PLL fix
[    3.295268] ehci-pci 0000:00:12.2: EHCI Host Controller
[    3.295273] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    3.295276] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.295284] ehci-pci 0000:00:12.2: debug port 1
[    3.295315] ehci-pci 0000:00:12.2: irq 17, io mem 0xfdffd000
[    3.306154] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    3.306194] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.306196] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.306197] usb usb1: Product: EHCI Host Controller
[    3.306198] usb usb1: Manufacturer: Linux 3.13.0-39-generic ehci_hcd
[    3.306199] usb usb1: SerialNumber: 0000:00:12.2
[    3.306294] hub 1-0:1.0: USB hub found
[    3.306299] hub 1-0:1.0: 5 ports detected
[    3.306532] ehci-pci 0000:00:13.2: EHCI Host Controller
[    3.306535] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    3.306538] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.306546] ehci-pci 0000:00:13.2: debug port 1
[    3.306569] ehci-pci 0000:00:13.2: irq 17, io mem 0xfdffb000
[    3.318135] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    3.318173] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.318174] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.318175] usb usb2: Product: EHCI Host Controller
[    3.318177] usb usb2: Manufacturer: Linux 3.13.0-39-generic ehci_hcd
[    3.318178] usb usb2: SerialNumber: 0000:00:13.2
[    3.318263] hub 2-0:1.0: USB hub found
[    3.318268] hub 2-0:1.0: 5 ports detected
[    3.318494] ehci-pci 0000:00:16.2: EHCI Host Controller
[    3.318497] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[    3.318500] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.318508] ehci-pci 0000:00:16.2: debug port 1
[    3.318528] ehci-pci 0000:00:16.2: irq 17, io mem 0xfdff8000
[    3.330120] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    3.330160] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    3.330161] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.330163] usb usb3: Product: EHCI Host Controller
[    3.330164] usb usb3: Manufacturer: Linux 3.13.0-39-generic ehci_hcd
[    3.330165] usb usb3: SerialNumber: 0000:00:16.2
[    3.330254] hub 3-0:1.0: USB hub found
[    3.330258] hub 3-0:1.0: 4 ports detected
[    3.330339] ehci-platform: EHCI generic platform driver
[    3.330345] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.330346] ohci-pci: OHCI PCI platform driver
[    3.330487] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    3.330491] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[    3.330507] ohci-pci 0000:00:12.0: irq 18, io mem 0xfdffe000
[    3.390056] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.390057] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.390059] usb usb4: Product: OHCI PCI host controller
[    3.390060] usb usb4: Manufacturer: Linux 3.13.0-39-generic ohci_hcd
[    3.390061] usb usb4: SerialNumber: 0000:00:12.0
[    3.390154] hub 4-0:1.0: USB hub found
[    3.390160] hub 4-0:1.0: 5 ports detected
[    3.390386] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    3.390390] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    3.390400] ohci-pci 0000:00:13.0: irq 18, io mem 0xfdffc000
[    3.449986] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    3.449988] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.449990] usb usb5: Product: OHCI PCI host controller
[    3.449991] usb usb5: Manufacturer: Linux 3.13.0-39-generic ohci_hcd
[    3.449992] usb usb5: SerialNumber: 0000:00:13.0
[    3.450078] hub 5-0:1.0: USB hub found
[    3.450085] hub 5-0:1.0: 5 ports detected
[    3.450310] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    3.450314] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[    3.450323] ohci-pci 0000:00:14.5: irq 18, io mem 0xfdffa000
[    3.509929] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    3.509932] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.509933] usb usb6: Product: OHCI PCI host controller
[    3.509935] usb usb6: Manufacturer: Linux 3.13.0-39-generic ohci_hcd
[    3.509936] usb usb6: SerialNumber: 0000:00:14.5
[    3.510024] hub 6-0:1.0: USB hub found
[    3.510031] hub 6-0:1.0: 2 ports detected
[    3.510231] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    3.510234] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[    3.510246] ohci-pci 0000:00:16.0: irq 18, io mem 0xfdff9000
[    3.569854] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    3.569856] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.569857] usb usb7: Product: OHCI PCI host controller
[    3.569858] usb usb7: Manufacturer: Linux 3.13.0-39-generic ohci_hcd
[    3.569860] usb usb7: SerialNumber: 0000:00:16.0
[    3.569943] hub 7-0:1.0: USB hub found
[    3.569950] hub 7-0:1.0: 4 ports detected
[    3.570032] ohci-platform: OHCI generic platform driver
[    3.570038] uhci_hcd: USB Universal Host Controller Interface driver
[    3.570096] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    3.570099] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[    3.570186] xhci_hcd 0000:02:00.0: irq 40 for MSI/MSI-X
[    3.570236] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    3.570237] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.570239] usb usb8: Product: xHCI Host Controller
[    3.570240] usb usb8: Manufacturer: Linux 3.13.0-39-generic xhci_hcd
[    3.570241] usb usb8: SerialNumber: 0000:02:00.0
[    3.570306] hub 8-0:1.0: USB hub found
[    3.570313] hub 8-0:1.0: 2 ports detected
[    3.570369] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    3.570372] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[    3.570401] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[    3.570402] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.570403] usb usb9: Product: xHCI Host Controller
[    3.570405] usb usb9: Manufacturer: Linux 3.13.0-39-generic xhci_hcd
[    3.570406] usb usb9: SerialNumber: 0000:02:00.0
[    3.570469] hub 9-0:1.0: USB hub found
[    3.570475] hub 9-0:1.0: 2 ports detected
[    3.581897] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    3.581901] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 10
[    3.582008] xhci_hcd 0000:06:00.0: irq 41 for MSI/MSI-X
[    3.582067] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[    3.582069] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.582070] usb usb10: Product: xHCI Host Controller
[    3.582071] usb usb10: Manufacturer: Linux 3.13.0-39-generic xhci_hcd
[    3.582072] usb usb10: SerialNumber: 0000:06:00.0
[    3.582151] hub 10-0:1.0: USB hub found
[    3.582158] hub 10-0:1.0: 2 ports detected
[    3.582214] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    3.582217] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 11
[    3.582248] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
[    3.582249] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.582250] usb usb11: Product: xHCI Host Controller
[    3.582251] usb usb11: Manufacturer: Linux 3.13.0-39-generic xhci_hcd
[    3.582253] usb usb11: SerialNumber: 0000:06:00.0
[    3.582314] hub 11-0:1.0: USB hub found
[    3.582321] hub 11-0:1.0: 2 ports detected
[    3.589877] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    3.622626] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[    3.622627] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[    3.873576] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.873669] mousedev: PS/2 mouse device common for all mice
[    3.873781] rtc_cmos 00:04: RTC can wake from S4
[    3.873863] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    3.873882] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
[    3.873936] device-mapper: uevent: version 1.0.3
[    3.873989] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    3.873994] ledtrig-cpu: registered to indicate activity on CPUs
[    3.874078] TCP: cubic registered
[    3.874147] NET: Registered protocol family 10
[    3.874275] NET: Registered protocol family 17
[    3.874281] Key type dns_resolver registered
[    3.874792] Loading compiled-in X.509 certificates
[    3.875516] Loaded X.509 cert 'Magrathea: Glacier signing key: e3c165d0891e3ceeb6dd5c18c7e1993cd24956b0'
[    3.875523] registered taskstats version 1
[    3.877225] Key type trusted registered
[    3.877512] usb 1-4: new high-speed USB device number 3 using ehci-pci
[    3.878604] Key type encrypted registered
[    3.879973] AppArmor: AppArmor sha1 policy hashing enabled
[    3.879975] IMA: No TPM chip found, activating TPM-bypass!
[    3.880241] regulator-dummy: disabling
[    3.880298]   Magic number: 10:84:180
[    3.880370] rtc_cmos 00:04: setting system clock to 2014-12-14 13:10:01 UTC (1418562601)
[    3.880486] acpi-cpufreq: overriding BIOS provided _PSD data
[    3.880807] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.880808] EDD information not available.
[    3.880830] PM: Hibernation image not present or could not be loaded.
[    3.881943] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    3.881945] Write protecting the kernel read-only data: 12288k
[    3.884454] Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
[    3.886547] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    3.895849] systemd-udevd[144]: starting version 204
[    3.912518] scsi0 : pata_atiixp
[    3.912635] scsi1 : pata_atiixp
[    3.912666] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[    3.912668] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[    3.912696] ahci 0000:00:11.0: version 3.0
[    3.912989] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    3.912993] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    3.913452] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.913466] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.913693] r8169 0000:05:00.0: irq 42 for MSI/MSI-X
[    3.913933] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000065a000, 50:e5:49:5f:1c:3a, XID 0c900800 IRQ 42
[    3.913934] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.914171] scsi2 : ahci
[    3.914517] scsi3 : ahci
[    3.914801] scsi4 : ahci
[    3.914989] scsi5 : ahci
[    3.915064] ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
[    3.915067] ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
[    3.915069] ata5: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
[    3.915072] ata6: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
[    3.915172] ahci 0000:03:00.0: irq 43 for MSI/MSI-X
[    3.915224] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl IDE mode
[    3.915227] ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    3.915600] scsi6 : ahci
[    3.915687] scsi7 : ahci
[    3.915742] ata7: SATA max UDMA/133 abar m512@0xfd0ff000 port 0xfd0ff100 irq 43
[    3.915744] ata8: SATA max UDMA/133 abar m512@0xfd0ff000 port 0xfd0ff180 irq 43
[    3.977422] firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    4.014926] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608
[    4.014929] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.014931] usb 1-4: Product: USB2.0 Hub
[    4.015341] hub 1-4:1.0: USB hub found
[    4.015673] hub 1-4:1.0: 4 ports detected
[    4.086925] ata1.01: ATAPI: ASUS    DRW-1814BLT, 1.14, max UDMA/66
[    4.086929] ata1.01: limited to UDMA/33 due to 40-wire cable
[    4.101498] ata1.01: configured for UDMA/33
[    4.102760] scsi 0:0:1:0: CD-ROM            ASUS     DRW-1814BLT      1.14 PQ: 0 ANSI: 5
[    4.105093] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.105096] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.105200] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    4.105293] sr 0:0:1:0: Attached scsi generic sg0 type 5
[    4.129246] usb 2-2: new high-speed USB device number 2 using ehci-pci
[    4.185174] tsc: Refined TSC clocksource calibration: 4026.942 MHz
[    4.233135] ata7: SATA link down (SStatus 0 SControl 300)
[    4.233165] ata8: SATA link down (SStatus 0 SControl 300)
[    4.233176] ata5: SATA link down (SStatus 0 SControl 300)
[    4.292100] usb 2-2: New USB device found, idVendor=093a, idProduct=2700
[    4.292102] usb 2-2: New USB device strings: Mfr=16, Product=96, SerialNumber=0
[    4.292104] usb 2-2: Product: A4 TECH PC Cam\xffffffc4\xffffff80\xffffff80\x18\xffffffee\xffffff88\xffffff85\xffffff88\xffffff85
[    4.292105] usb 2-2: Manufacturer: PixArt Imaging Inc.
[    4.404925] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.404944] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.404961] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.405939] ata6.00: ATA-8: WDC WD5000AAKS-00UU3A0, 01.03B01, max UDMA/133
[    4.405941] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.407044] ata6.00: configured for UDMA/133
[    4.408920] usb 3-4: new high-speed USB device number 2 using ehci-pci
[    4.409549] ata4.00: ATA-7: SAMSUNG SP2004C, VM100-32, max UDMA7
[    4.409550] ata4.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.411689] ata3.00: ATA-9: OCZ-VERTEX3, 2.06, max UDMA/133
[    4.411691] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.414197] ata4.00: configured for UDMA/133
[    4.421945] ata3.00: configured for UDMA/133
[    4.422047] scsi 2:0:0:0: Direct-Access     ATA      OCZ-VERTEX3      2.06 PQ: 0 ANSI: 5
[    4.422183] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    4.422187] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    4.422325] sd 2:0:0:0: [sda] Write Protect is off
[    4.422328] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.422330] scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG SP2004C  VM10 PQ: 0 ANSI: 5
[    4.422362] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.422433] sd 3:0:0:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[    4.422455] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    4.422527] sd 3:0:0:0: [sdb] Write Protect is off
[    4.422530] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    4.422565] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.422588] scsi 5:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
[    4.422737] sd 5:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    4.422742] sd 5:0:0:0: Attached scsi generic sg3 type 0
[    4.422840]  sda: sda1 sda2 < sda5 >
[    4.422843] sd 5:0:0:0: [sdc] Write Protect is off
[    4.422845] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    4.422882] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.423193] sd 2:0:0:0: [sda] Attached SCSI disk
[    4.448536]  sdc: sdc1 sdc2 sdc3 sdc4
[    4.448858] sd 5:0:0:0: [sdc] Attached SCSI disk
[    4.472475]  sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 >
[    4.472894] sd 3:0:0:0: [sdb] Attached SCSI disk
[    4.477465] firewire_core 0000:04:0e.0: created device fw0: GUID 0049e550b1440400, S400
[    4.510992] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.560735] usb 3-4: New USB device found, idVendor=0b05, idProduct=17e8
[    4.560738] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.560740] usb 3-4: Product: 802.11 n WLAN
[    4.560742] usb 3-4: Manufacturer: Ralink
[    4.560743] usb 3-4: SerialNumber: 1.0
[    4.709497] random: init urandom read with 89 bits of entropy available
[    4.732597] init: plymouth-upstart-bridge main process (231) terminated with status 1
[    4.732606] init: plymouth-upstart-bridge main process ended, respawning
[    4.737115] init: plymouth-upstart-bridge main process (239) terminated with status 1
[    4.737123] init: plymouth-upstart-bridge main process ended, respawning
[    4.740368] init: plymouth-upstart-bridge main process (244) terminated with status 1
[    4.740376] init: plymouth-upstart-bridge main process ended, respawning
[    4.742655] init: plymouth-upstart-bridge main process (247) terminated with status 1
[    4.742663] init: plymouth-upstart-bridge main process ended, respawning
[    4.828440] usb 4-3: new full-speed USB device number 2 using ohci-pci
[    4.852712] Adding 3938300k swap on /dev/sda5.  Priority:-1 extents:1 across:3938300k SSFS
[    4.871364] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.915013] systemd-udevd[360]: starting version 204
[    4.946713] lp: driver loaded but no devices found
[    4.951023] it87: Found IT8720F chip at 0x228, revision 8
[    4.951041] it87: Routing internal VCCH to in7
[    4.951045] it87: Beeping is supported
[    4.954793] ppdev: user-space parallel port driver
[    4.977821] wmi: Mapper loaded
[    4.992387] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    4.992390] AMD IOMMUv2 functionality not available on this system
[    5.002370] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20131115/utaddress-251)
[    5.002376] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.003519] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    5.003664] sp5100_tco: PCI Revision ID: 0x42
[    5.003693] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[    5.003702] sp5100_tco: Last reboot was not triggered by watchdog.
[    5.005680] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    5.005684] Disabling lock debugging due to kernel taint
[    5.008751] sp5100_tco: initialized (0xffffc90000656b00). heartbeat=60 sec (nowayout=0)
[    5.016712] fglrx: module verification failed: signature and/or  required key missing - tainting kernel
[    5.020494] random: nonblocking pool is initialized
[    5.024825] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3788 MBytes.
[    5.025137] <6>[fglrx]   vendor: 1002 device: 6739 count: 1
[    5.025735] <6>[fglrx] ioport: bar 4, base 0xee00, size: 0x100
[    5.026150] <6>[fglrx] Kernel PAT support is enabled
[    5.026168] <6>[fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 1 minors
[    5.027303] MCE: In-kernel MCE decoding enabled.
[    5.031524] EDAC MC: Ver: 3.0.0
[    5.033023] AMD64 EDAC driver v3.4.0
[    5.033046] EDAC amd64: DRAM ECC disabled.
[    5.033053] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    5.033053]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    5.033053]  (Note that use of the override may cause unknown side effects.)
[    5.033637] hda-intel 0000:00:14.2: Using LPIB position fix
[    5.038797] type=1400 audit(1418562602.656:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=492 comm="apparmor_parser"
[    5.038802] type=1400 audit(1418562602.656:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=492 comm="apparmor_parser"
[    5.038807] type=1400 audit(1418562602.656:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=492 comm="apparmor_parser"
[    5.039123] type=1400 audit(1418562602.656:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=492 comm="apparmor_parser"
[    5.039129] type=1400 audit(1418562602.656:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=492 comm="apparmor_parser"
[    5.039285] type=1400 audit(1418562602.656:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=492 comm="apparmor_parser"
[    5.039868] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[    5.050080] SKU: Nid=0x1d sku_cfg=0x4005e601
[    5.050082] SKU: port_connectivity=0x1
[    5.050084] SKU: enable_pcbeep=0x0
[    5.050085] SKU: check_sum=0x00000005
[    5.050086] SKU: customization=0x000000e6
[    5.050087] SKU: external_amp=0x0
[    5.050089] SKU: platform_type=0x0
[    5.050090] SKU: swap=0x0
[    5.050091] SKU: override=0x1
[    5.050519] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    5.050521]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.050522]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.050523]    mono: mono_out=0x0
[    5.050524]    dig-out=0x11/0x1e
[    5.050525]    inputs:
[    5.050526]      Front Mic=0x19
[    5.050530]      Rear Mic=0x18
[    5.050531]      Line=0x1a
[    5.050534] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[    5.050535] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
[    5.067477] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    5.068058] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    5.068328] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[    5.075129] Linux video capture interface: v2.00
[    5.082337] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[    5.082425] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[    5.082480] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[    5.082544] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[    5.082590] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[    5.082848] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    5.082850] hda-intel 0000:01:00.1: Using LPIB position fix
[    5.082888] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
[    5.085338] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[    5.088576] kvm: Nested Virtualization enabled
[    5.088582] kvm: Nested Paging enabled
[    5.088610] current rate 15872 is different from the runtime rate 16000
[    5.089229] rtusb init rt2870 --->
[    5.089398]
[    5.089398]
[    5.089398] === pAd = ffffc90011400000, size = 598032 ===
[    5.089398]
[    5.089466] <-- RTMPAllocAdapterBlock, Status=0
[    5.089666] Efuse Size=0x2d [2d0-2fc]
[    5.090211] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input11
[    5.092435] NVM is EFUSE
[    5.092725] current rate 47872 is different from the runtime rate 48000
[    5.092807] usbcore: registered new interface driver rt2870
[    5.106606] usbcore: registered new interface driver snd-usb-audio
[    5.106730] uvcvideo: Found UVC 1.00 device A4 TECH PC Cam\xffffffc4\xffffff80\xffffff80\x18\xffffffee\xffffff88\xffffff85\xffffff88\xffffff85 (093a:2700)
[    5.114416] input: A4 TECH PC Cam\xffffffc4\xffffff80\xffffff80\x18\xffffffee\xffffff88\xffffff85\xffffff88\xffffff85 as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input12
[    5.114492] usbcore: registered new interface driver uvcvideo
[    5.114493] USB Video Class driver (1.1.1)
[    5.184117] Switched to clocksource tsc
[    5.218651] Adding 1951860k swap on /dev/sdc1.  Priority:-2 extents:1 across:1951860k FS
[    5.469052] Adding 335868k swap on /dev/sdb8.  Priority:-3 extents:1 across:335868k FS
[    5.548648] usb 4-3: New USB device found, idVendor=046d, idProduct=0a1f
[    5.548653] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.548655] usb 4-3: Product: Logitech G930 Headset
[    5.548657] usb 4-3: Manufacturer: Logitech
[    5.645684] hidraw: raw HID events driver (C) Jiri Kosina
[    5.650767] usbcore: registered new interface driver usbhid
[    5.650769] usbhid: USB HID core driver
[    5.656572] input: Logitech Logitech G930 Headset as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.3/input/input13
[    5.656733] hid-generic 0003:046D:0A1F.0001: input,hiddev0,hidraw0: USB HID v1.01 Device [Logitech Logitech G930 Headset] on usb-0000:00:12.0-3/input3
[    5.703675] usb 1-4.1: new full-speed USB device number 4 using ehci-pci
[    5.798548] usb 1-4.1: New USB device found, idVendor=046d, idProduct=c52e
[    5.798551] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.798553] usb 1-4.1: Product: USB Receiver
[    5.798554] usb 1-4.1: Manufacturer: Logitech
[    5.800285] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.1/1-4.1:1.0/input/input14
[    5.800372] hid-generic 0003:046D:C52E.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.2-4.1/input0
[    5.802912] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.1/1-4.1:1.1/input/input15
[    5.803061] hid-generic 0003:046D:C52E.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-4.1/input1
[    5.875578] usb 1-4.4: new high-speed USB device number 5 using ehci-pci
[    5.968706] usb 1-4.4: New USB device found, idVendor=04e8, idProduct=6860
[    5.968709] usb 1-4.4: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[    5.968711] usb 1-4.4: Product: Android
[    5.968712] usb 1-4.4: Manufacturer: Samsung
[    5.968713] usb 1-4.4: SerialNumber: 47901eecdf833078
[    5.981452] cdc_acm 1-4.4:1.1: This device cannot do calls on its own. It is not a modem.
[    5.981777] cdc_acm 1-4.4:1.1: ttyACM0: USB ACM device
[    5.984523] usbcore: registered new interface driver cdc_acm
[    5.984526] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    7.653813] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    7.888082] init: failsafe main process (905) killed by TERM signal
[    7.946015] Bluetooth: Core ver 2.17
[    7.946028] NET: Registered protocol family 31
[    7.946029] Bluetooth: HCI device and connection manager initialized
[    7.946036] Bluetooth: HCI socket layer initialized
[    7.946038] Bluetooth: L2CAP socket layer initialized
[    7.946041] Bluetooth: SCO socket layer initialized
[    7.949445] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.949448] Bluetooth: BNEP filters: protocol multicast
[    7.949455] Bluetooth: BNEP socket layer initialized
[    7.950271] Bluetooth: RFCOMM TTY layer initialized
[    7.950278] Bluetooth: RFCOMM socket layer initialized
[    7.950282] Bluetooth: RFCOMM ver 1.11
[    7.957112] init: samba-ad-dc main process (951) terminated with status 1
[    7.970672] type=1400 audit(1418562605.589:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1038 comm="apparmor_parser"
[    7.970679] type=1400 audit(1418562605.589:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1038 comm="apparmor_parser"
[    7.970989] type=1400 audit(1418562605.589:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1038 comm="apparmor_parser"
[    7.986998] init: cups main process (1052) killed by HUP signal
[    7.987008] init: cups main process ended, respawning
[    8.154755] r8169 0000:05:00.0 eth0: link down
[    8.154796] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    8.155027] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    8.192647] audit_printk_skb: 138 callbacks suppressed
[    8.192649] type=1400 audit(1418562605.813:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=1101 comm="apparmor_parser"
[    8.192664] type=1400 audit(1418562605.813:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="pxgsettings" pid=1104 comm="apparmor_parser"
[    8.192673] type=1400 audit(1418562605.813:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=1104 comm="apparmor_parser"
[    8.192676] type=1400 audit(1418562605.813:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=1104 comm="apparmor_parser"
[    8.193008] type=1400 audit(1418562605.813:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=1104 comm="apparmor_parser"
[    8.193011] type=1400 audit(1418562605.813:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=1104 comm="apparmor_parser"
[    8.193154] type=1400 audit(1418562605.813:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=1104 comm="apparmor_parser"
[    8.193652] type=1400 audit(1418562605.813:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=1101 comm="apparmor_parser"
[    8.193656] type=1400 audit(1418562605.813:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=1101 comm="apparmor_parser"
[    8.208630] type=1400 audit(1418562605.829:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=1101 comm="apparmor_parser"
[    8.344621] init: alsa-restore main process (1310) terminated with status 99
[    8.392421] init: gdm main process (1324) killed by TERM signal
[    8.595629] fglrx_pci 0000:01:00.0: irq 45 for MSI/MSI-X
[    8.596365] <6>[fglrx] Firegl kernel thread PID: 1456
[    8.596447] <6>[fglrx] Firegl kernel thread PID: 1457
[    8.596512] <6>[fglrx] Firegl kernel thread PID: 1458
[    8.596623] <6>[fglrx] IRQ 45 Enabled
[    8.684159] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[    8.684162] <6>[fglrx] Reserved FB block: Unshared offset:fba0000, size:4000
[    8.684164] <6>[fglrx] Reserved FB block: Unshared offset:fba4000, size:45c000
[    8.684166] <6>[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[    9.185597] init: plymouth-upstart-bridge main process ended, respawning
[    9.190206] init: plymouth-upstart-bridge main process (1503) terminated with status 1
[    9.190215] init: plymouth-upstart-bridge main process ended, respawning
[    9.746798] current rate 47872 is different from the runtime rate 48000
[    9.748548] current rate 47872 is different from the runtime rate 48000
[    9.763153] current rate 47872 is different from the runtime rate 48000
[    9.764777] current rate 47872 is different from the runtime rate 48000
[   11.068397] /dev/vmmon[2187]: Module vmmon: registered with major=10 minor=165
[   11.068402] /dev/vmmon[2187]: Module vmmon: initialized
[   11.077878] Guest personality initialized and is inactive
[   11.077925] VMCI host device registered (name=vmci, major=10, minor=57)
[   11.077927] Initialized host personality
[   11.094565] NET: Registered protocol family 40
[   11.674465] /dev/vmnet: open called by PID 2276 (vmnet-netifup)
[   11.674472] /dev/vmnet: hub 1 does not exist, allocating memory.
[   11.674482] /dev/vmnet: port on hub 1 successfully opened
[   11.680226] /dev/vmnet: open called by PID 2278 (vmnet-dhcpd)
[   11.680235] /dev/vmnet: port on hub 1 successfully opened
[   11.683644] /dev/vmnet: open called by PID 2288 (vmnet-natd)
[   11.683649] /dev/vmnet: hub 8 does not exist, allocating memory.
[   11.683660] /dev/vmnet: port on hub 8 successfully opened
[   11.685420] /dev/vmnet: open called by PID 2290 (vmnet-netifup)
[   11.685426] /dev/vmnet: port on hub 8 successfully opened
[   11.690507] /dev/vmnet: open called by PID 2292 (vmnet-dhcpd)
[   11.690519] /dev/vmnet: port on hub 8 successfully opened
[   12.786420] vboxdrv: Found 8 processor cores.
[   12.786793] vboxdrv: fAsync=0 offMin=0x5aa offMax=0x3815
[   12.786880] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   12.786881] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
[   12.798480] vboxpci: IOMMU not found (not registered)
[   13.162354] NICLoadFirmware: We need to load firmware
[   13.420532] <-- RTMPAllocTxRxRingMemory, Status=0
[   13.420646] RTMP_TimerListAdd: add timer obj ffffc90011449f30!
[   13.420648] RTMP_TimerListAdd: add timer obj ffffc90011449fa8!
[   13.420649] RTMP_TimerListAdd: add timer obj ffffc9001144a020!
[   13.420650] RTMP_TimerListAdd: add timer obj ffffc90011449eb8!
[   13.420652] RTMP_TimerListAdd: add timer obj ffffc90011449d50!
[   13.420653] RTMP_TimerListAdd: add timer obj ffffc90011449dc8!
[   13.420655] RTMP_TimerListAdd: add timer obj ffffc90011413a38!
[   13.420656] RTMP_TimerListAdd: add timer obj ffffc900114029f0!
[   13.420657] RTMP_TimerListAdd: add timer obj ffffc90011402a70!
[   13.420658] RTMP_TimerListAdd: add timer obj ffffc90011413bc8!
[   13.420660] RTMP_TimerListAdd: add timer obj ffffc90011413948!
[   13.420661] RTMP_TimerListAdd: add timer obj ffffc90011413b48!
[   13.422036] -->RTUSBVenderReset
[   13.422154] <--RTUSBVenderReset
[   13.679993] Key1Str is Invalid key length(0) or Type(0)
[   13.680002] Key2Str is Invalid key length(0) or Type(0)
[   13.680009] Key3Str is Invalid key length(0) or Type(0)
[   13.680016] Key4Str is Invalid key length(0) or Type(0)
[   13.680156] 1. Phy Mode = 5
[   13.680157] 2. Phy Mode = 5
[   13.680158] NVM is Efuse and its size =2d[2d0-2fc]
[   13.732149] phy mode> Error! The chip does not support 5G band 15!
[   13.732201] RTMPSetPhyMode: channel is out of range, use first channel=1
[   13.765609] 3. Phy Mode = 9
[   13.768094] \x1b[mAntCfgInit: primary/secondary ant 0/1
[   13.768094] \x1b[mNICInitRT5390RFRegisters: Initialize frequency - EEPROM = 41, RF_R17 = 0
[   13.814916] bAutoTxAgcG = 1
[   13.821164] ---> InitFrequencyCalibration
[   13.823162] InitFrequencyCalibration: frequency offset in the EEPROM = 41
[   13.823163] <--- InitFrequencyCalibration
[   13.826903] MCS Set = ff ff 00 00 01
[   13.837460] <==== rt28xx_init, Status=0
[   13.839133] 0x1300 = 00064300
[   13.839232] /dev/vmnet: open called by PID 2264 (vmnet-bridge)
[   13.839241] /dev/vmnet: hub 0 does not exist, allocating memory.
[   13.839274] /dev/vmnet: port on hub 0 successfully opened
[   13.839284] bridge-ra0: device is wireless, enabling SMAC
[   13.839287] bridge-ra0: up
[   13.839289] bridge-ra0: attached
[   14.038955] userif-2: sent link down event.
[   14.038958] userif-2: sent link up event.
[   14.091480] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 804
[   14.766839] current rate 47872 is different from the runtime rate 48000
[   14.768586] current rate 47872 is different from the runtime rate 48000
[   14.782572] current rate 47872 is different from the runtime rate 48000
[   14.784187] current rate 47872 is different from the runtime rate 48000
[   14.935036] init: plymouth-stop pre-start process (3026) terminated with status 1
[   17.433205] retire_capture_urb: 16 callbacks suppressed
[   18.590010] ===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 1731
[   23.586827] ===>rt_ioctl_giwscan. 9(9) BSS returned, data->length = 2034
[   24.262970] usb 1-4.4: USB disconnect, device number 5
[   24.462603] usb 1-4.4: new high-speed USB device number 6 using ehci-pci
[   24.555347] usb 1-4.4: New USB device found, idVendor=04e8, idProduct=6864
[   24.555351] usb 1-4.4: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[   24.555353] usb 1-4.4: Product: Android
[   24.555354] usb 1-4.4: Manufacturer: Samsung
[   24.555355] usb 1-4.4: SerialNumber: 47901eecdf833078
[   24.575709] cfg80211: Calling CRDA to update world regulatory domain
[   24.577712] cfg80211: World regulatory domain updated:
[   24.577714] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   24.577716] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.577717] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.577719] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   24.577720] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.577721] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.578566] usbcore: registered new interface driver cdc_ether
[   24.581089] rndis_host 1-4.4:1.0 usb0: register 'rndis_host' at usb-0000:00:12.2-4.4, RNDIS device, 46:34:89:87:81:32
[   24.581128] usbcore: registered new interface driver rndis_host
[   24.582649] usbcore: registered new interface driver rndis_wlan
[   24.787717] userif-2: sent link down event.
[   24.787720] userif-2: sent link up event.
[   28.581753] ===>rt_ioctl_giwscan. 9(9) BSS returned, data->length = 2034
[   31.368596] userif-2: sent link down event.
[   31.368598] userif-2: sent link up event.
[   32.170359] bridge-ra0: disabling the bridge
[   32.177518] bridge-ra0: down
[   32.177523] bridge-ra0: detached
[   32.177551] /dev/vmnet: open called by PID 2264 (vmnet-bridge)
[   32.177558] /dev/vmnet: hub 0 does not exist, allocating memory.
[   32.177569] /dev/vmnet: port on hub 0 successfully opened
[   32.177575] bridge-usb0: can't bridge with usb0, bad header length 58
[   32.177577] bridge-usb0: attached
[   32.369990] userif-2: sent link down event.
[   32.369993] userif-2: sent link up event.
[   33.575571] ===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 1731
[   37.995568] type=1400 audit(1418562635.649:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3882 comm="apparmor_parser"
[   37.995575] type=1400 audit(1418562635.649:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3882 comm="apparmor_parser"
[   37.995887] type=1400 audit(1418562635.649:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3882 comm="apparmor_parser"
[  233.263620] ===>rt_ioctl_giwscan. 9(9) BSS returned, data->length = 2034
[  376.128397] systemd-hostnamed[4473]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[  432.942801] ===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 1731
[  637.606408] ===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 1731
[  837.284114] ===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 1748
[ 1041.951316] ===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 1731
[ 1246.679561] ===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 1731
[ 1446.453501] ===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 1731
[ 1651.224628] ===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 1731
[ 1705.652506] bridge-usb0: detached
[ 1705.652530] /dev/vmnet: open called by PID 2264 (vmnet-bridge)
[ 1705.652540] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 1705.652561] /dev/vmnet: port on hub 0 successfully opened
[ 1705.652570] bridge-ra0: device is wireless, enabling SMAC
[ 1705.652574] bridge-ra0: up
[ 1705.652577] bridge-ra0: attached
[ 1705.851348] userif-2: sent link down event.
[ 1705.851352] userif-2: sent link up event.
[ 1706.428254] ---> RTMPFreeTxRxRingMemory
[ 1706.428297] <--- RTMPFreeTxRxRingMemory
[ 1706.431468] bridge-ra0: disabling the bridge
[ 1706.436013] RtmpAsicLoadFirmware: ver 21/21, sum cdf7/cdf7, mac cdf72100
[ 1706.436135] NICLoadFirmware: firmware loaded already
[ 1706.437928] <-- RTMPAllocTxRxRingMemory, Status=0
[ 1706.438116] RTMP_TimerListAdd: add timer obj ffffc90011449f30!
[ 1706.438118] RTMP_TimerListAdd: add timer obj ffffc90011449fa8!
[ 1706.438120] RTMP_TimerListAdd: add timer obj ffffc9001144a020!
[ 1706.438122] RTMP_TimerListAdd: add timer obj ffffc90011449eb8!
[ 1706.438125] RTMP_TimerListAdd: add timer obj ffffc90011449d50!
[ 1706.438126] RTMP_TimerListAdd: add timer obj ffffc90011449dc8!
[ 1706.438128] RTMP_TimerListAdd: add timer obj ffffc90011413a38!
[ 1706.438129] RTMP_TimerListAdd: add timer obj ffffc900114029f0!
[ 1706.438131] RTMP_TimerListAdd: add timer obj ffffc90011402a70!
[ 1706.438132] RTMP_TimerListAdd: add timer obj ffffc90011413bc8!
[ 1706.438135] RTMP_TimerListAdd: add timer obj ffffc90011413948!
[ 1706.438137] RTMP_TimerListAdd: add timer obj ffffc90011413b48!
[ 1706.440254] -->RTUSBVenderReset
[ 1706.440376] <--RTUSBVenderReset
[ 1706.447476] bridge-ra0: down
[ 1706.447484] bridge-ra0: detached
[ 1706.630419] userif-2: sent link down event.
[ 1706.630422] userif-2: sent link up event.
[ 1706.697725] CfgSetCountryRegion():CountryRegion in eeprom was programmed
[ 1706.697963] Key1Str is Invalid key length(0) or Type(0)
[ 1706.697984] Key2Str is Invalid key length(0) or Type(0)
[ 1706.698005] Key3Str is Invalid key length(0) or Type(0)
[ 1706.698026] Key4Str is Invalid key length(0) or Type(0)
[ 1706.698419] 1. Phy Mode = 5
[ 1706.698422] 2. Phy Mode = 5
[ 1706.698426] NVM is Efuse and its size =2d[2d0-2fc]
[ 1706.750374] phy mode> Error! The chip does not support 5G band 15!
[ 1706.750498] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 1706.783952] 3. Phy Mode = 9
[ 1706.786446] \x1b[mAntCfgInit: primary/secondary ant 0/1
[ 1706.786446] \x1b[mNICInitRT5390RFRegisters: Initialize frequency - EEPROM = 41, RF_R17 = 41
[ 1706.829891] bAutoTxAgcG = 1
[ 1706.836133] ---> InitFrequencyCalibration
[ 1706.838130] InitFrequencyCalibration: frequency offset in the EEPROM = 41
[ 1706.838134] <--- InitFrequencyCalibration
[ 1706.841878] MCS Set = ff ff 00 00 01
[ 1706.852460] <==== rt28xx_init, Status=0
[ 1706.854103] 0x1300 = 00064300
[ 1707.016849] r8169 0000:05:00.0 eth0: link down
[ 1707.016924] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1707.156710] r8169 0000:05:00.0 eth0: link down
[ 1707.156768] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1707.246729] ERROR!!! RTMPSetTimer failed, Halt in Progress!
[ 1707.301458] ---> RTMPFreeTxRxRingMemory
[ 1707.301502] <--- RTMPFreeTxRxRingMemory
[ 1707.308655] RtmpAsicLoadFirmware: ver 21/21, sum cdf7/cdf7, mac cdf72100
[ 1707.308778] NICLoadFirmware: firmware loaded already
[ 1707.310562] <-- RTMPAllocTxRxRingMemory, Status=0
[ 1707.310808] RTMP_TimerListAdd: add timer obj ffffc90011449f30!
[ 1707.310813] RTMP_TimerListAdd: add timer obj ffffc90011449fa8!
[ 1707.310816] RTMP_TimerListAdd: add timer obj ffffc9001144a020!
[ 1707.310820] RTMP_TimerListAdd: add timer obj ffffc90011449eb8!
[ 1707.310825] RTMP_TimerListAdd: add timer obj ffffc90011449d50!
[ 1707.310828] RTMP_TimerListAdd: add timer obj ffffc90011449dc8!
[ 1707.310831] RTMP_TimerListAdd: add timer obj ffffc90011413a38!
[ 1707.310834] RTMP_TimerListAdd: add timer obj ffffc900114029f0!
[ 1707.310837] RTMP_TimerListAdd: add timer obj ffffc90011402a70!
[ 1707.310840] RTMP_TimerListAdd: add timer obj ffffc90011413bc8!
[ 1707.310844] RTMP_TimerListAdd: add timer obj ffffc90011413948!
[ 1707.310848] RTMP_TimerListAdd: add timer obj ffffc90011413b48!
[ 1707.312904] -->RTUSBVenderReset
[ 1707.313028] <--RTUSBVenderReset
[ 1707.576237] CfgSetCountryRegion():CountryRegion in eeprom was programmed
[ 1707.576481] Key1Str is Invalid key length(0) or Type(0)
[ 1707.576503] Key2Str is Invalid key length(0) or Type(0)
[ 1707.576524] Key3Str is Invalid key length(0) or Type(0)
[ 1707.576544] Key4Str is Invalid key length(0) or Type(0)
[ 1707.577025] 1. Phy Mode = 5
[ 1707.577029] 2. Phy Mode = 5
[ 1707.577034] NVM is Efuse and its size =2d[2d0-2fc]
[ 1707.628886] phy mode> Error! The chip does not support 5G band 15!
[ 1707.628979] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 1707.662592] 3. Phy Mode = 9
[ 1707.665087] \x1b[mAntCfgInit: primary/secondary ant 0/1
[ 1707.665087] \x1b[mNICInitRT5390RFRegisters: Initialize frequency - EEPROM = 41, RF_R17 = 41
[ 1707.708530] bAutoTxAgcG = 1
[ 1707.714647] ---> InitFrequencyCalibration
[ 1707.716644] InitFrequencyCalibration: frequency offset in the EEPROM = 41
[ 1707.716648] <--- InitFrequencyCalibration
[ 1707.720390] MCS Set = ff ff 00 00 01
[ 1707.730961] <==== rt28xx_init, Status=0
[ 1707.733126] 0x1300 = 00064300
[ 1707.733607] /dev/vmnet: open called by PID 2264 (vmnet-bridge)
[ 1707.733618] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 1707.733635] /dev/vmnet: port on hub 0 successfully opened
[ 1707.733645] bridge-ra0: device is wireless, enabling SMAC
[ 1707.733648] bridge-ra0: up
[ 1707.733652] bridge-ra0: attached
[ 1707.933363] userif-2: sent link down event.
[ 1707.933371] userif-2: sent link up event.
[ 1707.955806] r8169 0000:05:00.0 eth0: link down
[ 1707.955863] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1708.733149] PM: Syncing filesystems ... done.
[ 1708.739123] PM: Preparing system for mem sleep
[ 1708.739260] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 1708.740958] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1708.742113] PM: Entering mem sleep
[ 1708.742135] Suspending console(s) (use no_console_suspend to debug)
[ 1708.742424] sd 5:0:0:0: [sdc] Synchronizing SCSI cache
[ 1708.742484] sd 3:0:0:0: [sdb] Synchronizing SCSI cache
[ 1708.742531] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 1708.742555] sd 5:0:0:0: [sdc] Stopping disk
[ 1708.742557] sd 2:0:0:0: [sda] Stopping disk
[ 1708.742569] sd 3:0:0:0: [sdb] Stopping disk
[ 1708.742608] Bulk In Failed. Status=-2, BIIdx=0x0, BIRIdx=0x0, actual_length= 0x0
[ 1708.742658] serial 00:07: disabled
[ 1708.780962] <3>[fglrx:firegl_pplib_notify_event] *ERROR* PPLIB: PPLib Notify Event failed!
[ 1708.780964] <3>[fglrx:firegl_pplib_notify_event] *ERROR*        ulEventType = 00000002, ulEventData = 00000000
[ 1708.781026] <6>[fglrx] IRQ 45 Disabled
[ 1708.781075] <6>[fglrx] Preparing suspend fglrx in kernel.
[ 1709.298563] <6>[fglrx] Suspending fglrx in kernel completed.
[ 1709.298563] <6>[fglrx] Power down the ASIC .
[ 1709.509455] PM: suspend of devices complete after 768.032 msecs
[ 1709.509616] PM: late suspend of devices complete after 0.160 msecs
[ 1709.509757] pcieport 0000:00:15.1: System wakeup enabled by ACPI
[ 1709.524024] pcieport 0000:00:15.0: System wakeup enabled by ACPI
[ 1709.539994] pcieport 0000:00:09.0: System wakeup enabled by ACPI
[ 1709.556008] ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
[ 1709.571935] ohci-pci 0000:00:16.0: System wakeup enabled by ACPI
[ 1709.572040] ohci-pci 0000:00:14.5: System wakeup enabled by ACPI
[ 1709.572106] ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
[ 1709.587922] ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
[ 1709.587945] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
[ 1709.603899] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
[ 1709.603962] PM: noirq suspend of devices complete after 94.450 msecs
[ 1709.604606] ACPI: Preparing to enter system sleep state S3
[ 1709.605072] PM: Saving platform NVS memory
[ 1709.605209] Disabling non-boot CPUs ...
[ 1709.606552] kvm: disabling virtualization on CPU1
[ 1709.606557] smpboot: CPU 1 is now offline
[ 1709.608434] kvm: disabling virtualization on CPU2
[ 1709.609080] smpboot: CPU 2 is now offline
[ 1709.609571] Broke affinity for irq 18
[ 1709.610598] kvm: disabling virtualization on CPU3
[ 1709.711750] smpboot: CPU 3 is now offline
[ 1709.713189] kvm: disabling virtualization on CPU4
[ 1709.815650] smpboot: CPU 4 is now offline
[ 1709.817205] kvm: disabling virtualization on CPU5
[ 1709.919526] smpboot: CPU 5 is now offline
[ 1709.921000] kvm: disabling virtualization on CPU6
[ 1710.023402] smpboot: CPU 6 is now offline
[ 1710.023846] Broke affinity for irq 19
[ 1710.024874] kvm: disabling virtualization on CPU7
[ 1710.127281] smpboot: CPU 7 is now offline
[ 1710.128760] ACPI: Low-level resume complete
[ 1710.128785] PM: Restoring platform NVS memory
[ 1710.128855] PCI-DMA: Resuming GART IOMMU
[ 1710.128856] PCI-DMA: Restoring GART aperture settings
[ 1710.129027] LVT offset 0 assigned for vector 0x400
[ 1710.129097] Enabling non-boot CPUs ...
[ 1710.129128] x86: Booting SMP configuration:
[ 1710.129129] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 1710.140455] kvm: enabling virtualization on CPU1
[ 1710.142819] CPU1 is up
[ 1710.142832] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 1710.153776] kvm: enabling virtualization on CPU2
[ 1710.156014] CPU2 is up
[ 1710.156025] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 1710.166965] kvm: enabling virtualization on CPU3
[ 1710.169235] CPU3 is up
[ 1710.169250] smpboot: Booting Node 0 Processor 4 APIC 0x4
[ 1710.180195] kvm: enabling virtualization on CPU4
[ 1710.182459] CPU4 is up
[ 1710.182472] smpboot: Booting Node 0 Processor 5 APIC 0x5
[ 1710.193413] kvm: enabling virtualization on CPU5
[ 1710.195675] CPU5 is up
[ 1710.195688] smpboot: Booting Node 0 Processor 6 APIC 0x6
[ 1710.206633] kvm: enabling virtualization on CPU6
[ 1710.208915] CPU6 is up
[ 1710.208928] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 1710.219870] kvm: enabling virtualization on CPU7
[ 1710.222162] CPU7 is up
[ 1710.231789] ACPI: Waking up from system sleep state S3
[ 1710.242237] ahci 0000:00:11.0: set SATA to AHCI mode
[ 1710.242257] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
[ 1710.256748] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
[ 1710.256768] ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
[ 1710.272729] ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
[ 1710.288752] ohci-pci 0000:00:14.5: System wakeup disabled by ACPI
[ 1710.288875] ohci-pci 0000:00:16.0: System wakeup disabled by ACPI
[ 1710.304694] ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
[ 1710.336672] pcieport 0000:00:09.0: System wakeup disabled by ACPI
[ 1710.400614] pcieport 0000:00:15.1: System wakeup disabled by ACPI
[ 1710.400718] PM: noirq resume of devices complete after 168.694 msecs
[ 1710.400844] PM: early resume of devices complete after 0.103 msecs
[ 1710.400977] usb usb8: root hub lost power or was reset
[ 1710.400978] usb usb9: root hub lost power or was reset
[ 1710.401032] pcieport 0000:00:15.0: System wakeup disabled by ACPI
[ 1710.401036] usb usb10: root hub lost power or was reset
[ 1710.401037] usb usb11: root hub lost power or was reset
[ 1710.401135] xhci_hcd 0000:02:00.0: irq 40 for MSI/MSI-X
[ 1710.401218] xhci_hcd 0000:06:00.0: irq 41 for MSI/MSI-X
[ 1710.402725] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
[ 1710.403024] serial 00:07: activated
[ 1710.408639] <6>[fglrx] Power up the ASIC
[ 1710.421131] <6>[fglrx] Preparing resume fglrx in kernel.
[ 1710.432907] <6>[fglrx] Resuming fglrx in kernel completed.
[ 1710.432963] <6>[fglrx] IRQ 45 Enabled
[ 1710.510854] r8169 0000:05:00.0 eth0: link down
[ 1710.588592] ata1.01: ACPI cmd ef/03:08:00:00:00:b0 (SET FEATURES) filtered out
[ 1710.588593] ata1.01: ACPI cmd ef/03:21:00:00:00:b0 (SET FEATURES) filtered out
[ 1710.604576] ata1.01: configured for UDMA/33
[ 1710.673263] usb 1-4.4: reset high-speed USB device number 6 using ehci-pci
[ 1710.724225] ata5: SATA link down (SStatus 0 SControl 300)
[ 1710.724229] ata8: SATA link down (SStatus 0 SControl 300)
[ 1710.724254] ata7: SATA link down (SStatus 0 SControl 300)
[ 1710.764647] usb 1-4.4: device firmware changed
[ 1710.820083] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445325511100855428 new 18445325506571072778 attempts 1
[ 1710.896008] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1710.963937] firewire_core 0000:04:0e.0: rediscovered device fw0
[ 1711.364418] ata3.00: configured for UDMA/133
[ 1711.379492] sd 2:0:0:0: [sda] Starting disk
[ 1714.252213] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1714.261424] ata4.00: configured for UDMA/133
[ 1714.276220] sd 3:0:0:0: [sdb] Starting disk
[ 1715.930324] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1716.356153] ata6.00: configured for UDMA/133
[ 1716.369847] sd 5:0:0:0: [sdc] Starting disk
[ 1716.381237] PM: resume of devices complete after 5987.154 msecs
[ 1716.381442] PM: Finishing wakeup.
[ 1716.381443] Restarting tasks ... done.
[ 1716.385893] usb 1-4.4: USB disconnect, device number 6
[ 1716.385960] rndis_host 1-4.4:1.0 usb0: unregister 'rndis_host' usb-0000:00:12.2-4.4, RNDIS device
[ 1716.617865] usb 1-4.4: new high-speed USB device number 7 using ehci-pci
[ 1716.710737] usb 1-4.4: New USB device found, idVendor=04e8, idProduct=6860
[ 1716.710741] usb 1-4.4: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 1716.710743] usb 1-4.4: Product: Android
[ 1716.710744] usb 1-4.4: Manufacturer: Samsung
[ 1716.710745] usb 1-4.4: SerialNumber: 47901eecdf833078
[ 1716.711511] cdc_acm 1-4.4:1.1: This device cannot do calls on its own. It is not a modem.
[ 1716.711595] cdc_acm 1-4.4:1.1: ttyACM0: USB ACM device
[ 1719.174940] ===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 1731
[ 1722.141536] ===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 1731
[ 1722.285660] ---> RTMPFreeTxRxRingMemory
[ 1722.285699] <--- RTMPFreeTxRxRingMemory
[ 1722.288860] bridge-ra0: disabling the bridge
[ 1722.294078] RtmpAsicLoadFirmware: ver 21/21, sum cdf7/cdf7, mac cdf72100
[ 1722.294200] NICLoadFirmware: firmware loaded already
[ 1722.295969] <-- RTMPAllocTxRxRingMemory, Status=0
[ 1722.296199] RTMP_TimerListAdd: add timer obj ffffc90011449f30!
[ 1722.296201] RTMP_TimerListAdd: add timer obj ffffc90011449fa8!
[ 1722.296203] RTMP_TimerListAdd: add timer obj ffffc9001144a020!
[ 1722.296205] RTMP_TimerListAdd: add timer obj ffffc90011449eb8!
[ 1722.296207] RTMP_TimerListAdd: add timer obj ffffc90011449d50!
[ 1722.296209] RTMP_TimerListAdd: add timer obj ffffc90011449dc8!
[ 1722.296210] RTMP_TimerListAdd: add timer obj ffffc90011413a38!
[ 1722.296212] RTMP_TimerListAdd: add timer obj ffffc900114029f0!
[ 1722.296213] RTMP_TimerListAdd: add timer obj ffffc90011402a70!
[ 1722.296214] RTMP_TimerListAdd: add timer obj ffffc90011413bc8!
[ 1722.296216] RTMP_TimerListAdd: add timer obj ffffc90011413948!
[ 1722.296218] RTMP_TimerListAdd: add timer obj ffffc90011413b48!
[ 1722.298313] -->RTUSBVenderReset
[ 1722.298442] <--RTUSBVenderReset
[ 1722.311151] bridge-ra0: down
[ 1722.311164] bridge-ra0: detached
[ 1722.487581] userif-2: sent link down event.
[ 1722.487588] userif-2: sent link up event.
[ 1722.555631] CfgSetCountryRegion():CountryRegion in eeprom was programmed
[ 1722.555739] Key1Str is Invalid key length(0) or Type(0)
[ 1722.555748] Key2Str is Invalid key length(0) or Type(0)
[ 1722.555757] Key3Str is Invalid key length(0) or Type(0)
[ 1722.555767] Key4Str is Invalid key length(0) or Type(0)
[ 1722.555935] 1. Phy Mode = 5
[ 1722.555937] 2. Phy Mode = 5
[ 1722.555939] NVM is Efuse and its size =2d[2d0-2fc]
[ 1722.607425] phy mode> Error! The chip does not support 5G band 15!
[ 1722.607487] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 1722.640885] 3. Phy Mode = 9
[ 1722.643378] \x1b[mAntCfgInit: primary/secondary ant 0/1
[ 1722.643378] \x1b[mNICInitRT5390RFRegisters: Initialize frequency - EEPROM = 41, RF_R17 = 41
[ 1722.686823] bAutoTxAgcG = 1
[ 1722.692938] ---> InitFrequencyCalibration
[ 1722.695062] InitFrequencyCalibration: frequency offset in the EEPROM = 41
[ 1722.695064] <--- InitFrequencyCalibration
[ 1722.698808] MCS Set = ff ff 00 00 01
[ 1722.709374] <==== rt28xx_init, Status=0
[ 1722.711043] 0x1300 = 00064300
[ 1722.940536] r8169 0000:05:00.0 eth0: link down
[ 1722.940605] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1723.286176] /dev/vmnet: open called by PID 2264 (vmnet-bridge)
[ 1723.286197] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 1723.286237] /dev/vmnet: port on hub 0 successfully opened
[ 1723.286258] bridge-ra0: device is wireless, enabling SMAC
[ 1723.286264] bridge-ra0: up
[ 1723.286271] bridge-ra0: attached
[ 1723.486140] userif-2: sent link down event.
[ 1723.486145] userif-2: sent link up event.
[ 1728.971349] usb 1-4.4: USB disconnect, device number 7
[ 1729.179721] usb 1-4.4: new high-speed USB device number 8 using ehci-pci
[ 1729.276215] usb 1-4.4: New USB device found, idVendor=04e8, idProduct=6864
[ 1729.276223] usb 1-4.4: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 1729.276228] usb 1-4.4: Product: Android
[ 1729.276232] usb 1-4.4: Manufacturer: Samsung
[ 1729.276236] usb 1-4.4: SerialNumber: 47901eecdf833078
[ 1729.278414] rndis_host 1-4.4:1.0 usb0: register 'rndis_host' at usb-0000:00:12.2-4.4, RNDIS device, 8e:3f:d7:77:63:66
[ 1729.504812] userif-2: sent link down event.
[ 1729.504819] userif-2: sent link up event.
[ 1735.666826] userif-2: sent link down event.
[ 1735.666834] userif-2: sent link up event.
[ 1736.471518] bridge-ra0: disabling the bridge
[ 1736.483121] bridge-ra0: down
[ 1736.483134] bridge-ra0: detached
[ 1736.483195] /dev/vmnet: open called by PID 2264 (vmnet-bridge)
[ 1736.483211] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 1736.483249] /dev/vmnet: port on hub 0 successfully opened
[ 1736.483263] bridge-usb0: can't bridge with usb0, bad header length 58
[ 1736.483269] bridge-usb0: attached
[ 1736.670838] userif-2: sent link down event.
[ 1736.670855] userif-2: sent link up event.
[ 1921.919520] ===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 1731
[ 2126.690584] ===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 1731
[ 2331.458217] ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 1463
[ 2536.223178] ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 1540
[ 2692.264540] /home/heyyo/Downloads/DR_USB_N14_261320140102_Linux/RT5372_LinuxSTA_2.6.1.3_20140102/os/linux/../../common/cmm_asic.c:2630 assert KeyIdx < 4failed
[ 2692.265775] /home/heyyo/Downloads/DR_USB_N14_261320140102_Linux/RT5372_LinuxSTA_2.6.1.3_20140102/os/linux/../../common/cmm_asic.c:2630 assert KeyIdx < 4failed
[ 2692.439913] userif-2: sent link down event.
[ 2692.439920] userif-2: sent link up event.
[ 2702.354784] ===>rt_ioctl_giwscan. 9(9) BSS returned, data->length = 1968
[ 2702.355207] ==>rt_ioctl_siwfreq::SIOCSIWFREQ(Channel=1)
[ 2717.444821] ===>rt_ioctl_giwscan. 9(9) BSS returned, data->length = 1968
[ 2717.445138] ==>rt_ioctl_siwfreq::SIOCSIWFREQ(Channel=1)
[ 2725.505566] ---> RTMPFreeTxRxRingMemory
[ 2725.505612] <--- RTMPFreeTxRxRingMemory
[ 2725.625224] userif-2: sent link down event.
[ 2725.625232] userif-2: sent link up event.
[ 2740.738800] RtmpAsicLoadFirmware: ver 21/21, sum cdf7/cdf7, mac cdf72100
[ 2740.738921] NICLoadFirmware: firmware loaded already
[ 2740.740943] <-- RTMPAllocTxRxRingMemory, Status=0
[ 2740.741218] RTMP_TimerListAdd: add timer obj ffffc90011449f30!
[ 2740.741222] RTMP_TimerListAdd: add timer obj ffffc90011449fa8!
[ 2740.741225] RTMP_TimerListAdd: add timer obj ffffc9001144a020!
[ 2740.741229] RTMP_TimerListAdd: add timer obj ffffc90011449eb8!
[ 2740.741234] RTMP_TimerListAdd: add timer obj ffffc90011449d50!
[ 2740.741237] RTMP_TimerListAdd: add timer obj ffffc90011449dc8!
[ 2740.741240] RTMP_TimerListAdd: add timer obj ffffc90011413a38!
[ 2740.741243] RTMP_TimerListAdd: add timer obj ffffc900114029f0!
[ 2740.741246] RTMP_TimerListAdd: add timer obj ffffc90011402a70!
[ 2740.741249] RTMP_TimerListAdd: add timer obj ffffc90011413bc8!
[ 2740.741253] RTMP_TimerListAdd: add timer obj ffffc90011413948!
[ 2740.741257] RTMP_TimerListAdd: add timer obj ffffc90011413b48!
[ 2740.743168] -->RTUSBVenderReset
[ 2740.743288] <--RTUSBVenderReset
[ 2741.000631] CfgSetCountryRegion():CountryRegion in eeprom was programmed
[ 2741.000874] Key1Str is Invalid key length(0) or Type(0)
[ 2741.000895] Key2Str is Invalid key length(0) or Type(0)
[ 2741.000916] Key3Str is Invalid key length(0) or Type(0)
[ 2741.000937] Key4Str is Invalid key length(0) or Type(0)
[ 2741.001334] 1. Phy Mode = 5
[ 2741.001336] 2. Phy Mode = 5
[ 2741.001340] NVM is Efuse and its size =2d[2d0-2fc]
[ 2741.053155] phy mode> Error! The chip does not support 5G band 15!
[ 2741.053273] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 2741.086735] 3. Phy Mode = 9
[ 2741.089230] \x1b[mAntCfgInit: primary/secondary ant 0/1
[ 2741.089230] \x1b[mNICInitRT5390RFRegisters: Initialize frequency - EEPROM = 41, RF_R17 = 41
[ 2741.132676] bAutoTxAgcG = 1
[ 2741.138790] ---> InitFrequencyCalibration
[ 2741.140913] InitFrequencyCalibration: frequency offset in the EEPROM = 41
[ 2741.140917] <--- InitFrequencyCalibration
[ 2741.144660] MCS Set = ff ff 00 00 01
[ 2741.155235] <==== rt28xx_init, Status=0
[ 2741.156887] 0x1300 = 00064300
[ 2741.357105] userif-2: sent link down event.
[ 2741.357112] userif-2: sent link up event.
[ 2741.410964] ===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 644
[ 2945.763796] ===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 1766
[ 3150.528793] ===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 1706
[ 3350.305273] ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 1463
[ 3555.074865] ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 1463
[ 3742.237820] ---> RTMPFreeTxRxRingMemory
[ 3742.237863] <--- RTMPFreeTxRxRingMemory
[ 3742.440021] userif-2: sent link down event.
[ 3742.440028] userif-2: sent link up event.
[ 3746.644932] RtmpAsicLoadFirmware: ver 21/21, sum cdf7/cdf7, mac cdf72100
[ 3746.645051] NICLoadFirmware: firmware loaded already
[ 3746.647121] <-- RTMPAllocTxRxRingMemory, Status=0
[ 3746.647486] RTMP_TimerListAdd: add timer obj ffffc90011449f30!
[ 3746.647493] RTMP_TimerListAdd: add timer obj ffffc90011449fa8!
[ 3746.647497] RTMP_TimerListAdd: add timer obj ffffc9001144a020!
[ 3746.647502] RTMP_TimerListAdd: add timer obj ffffc90011449eb8!
[ 3746.647510] RTMP_TimerListAdd: add timer obj ffffc90011449d50!
[ 3746.647515] RTMP_TimerListAdd: add timer obj ffffc90011449dc8!
[ 3746.647519] RTMP_TimerListAdd: add timer obj ffffc90011413a38!
[ 3746.647524] RTMP_TimerListAdd: add timer obj ffffc900114029f0!
[ 3746.647528] RTMP_TimerListAdd: add timer obj ffffc90011402a70!
[ 3746.647532] RTMP_TimerListAdd: add timer obj ffffc90011413bc8!
[ 3746.647538] RTMP_TimerListAdd: add timer obj ffffc90011413948!
[ 3746.647544] RTMP_TimerListAdd: add timer obj ffffc90011413b48!
[ 3746.649169] -->RTUSBVenderReset
[ 3746.649294] <--RTUSBVenderReset
[ 3746.906884] CfgSetCountryRegion():CountryRegion in eeprom was programmed
[ 3746.907115] Key1Str is Invalid key length(0) or Type(0)
[ 3746.907136] Key2Str is Invalid key length(0) or Type(0)
[ 3746.907157] Key3Str is Invalid key length(0) or Type(0)
[ 3746.907178] Key4Str is Invalid key length(0) or Type(0)
[ 3746.907565] 1. Phy Mode = 5
[ 3746.907570] 2. Phy Mode = 5
[ 3746.907574] NVM is Efuse and its size =2d[2d0-2fc]
[ 3746.959408] phy mode> Error! The chip does not support 5G band 15!
[ 3746.959529] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 3746.992989] 3. Phy Mode = 9
[ 3746.995466] \x1b[mAntCfgInit: primary/secondary ant 0/1
[ 3746.995466] \x1b[mNICInitRT5390RFRegisters: Initialize frequency - EEPROM = 41, RF_R17 = 41
[ 3747.038927] bAutoTxAgcG = 1
[ 3747.045047] ---> InitFrequencyCalibration
[ 3747.047143] InitFrequencyCalibration: frequency offset in the EEPROM = 41
[ 3747.047146] <--- InitFrequencyCalibration
[ 3747.050918] MCS Set = ff ff 00 00 01
[ 3747.061491] <==== rt28xx_init, Status=0
[ 3747.063142] 0x1300 = 00064300
[ 3747.263295] userif-2: sent link down event.
[ 3747.263302] userif-2: sent link up event.
[ 3759.841451] ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 1463
[ 3784.629396] ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 1463
[ 3810.330718] ---> RTMPFreeTxRxRingMemory
[ 3810.330762] <--- RTMPFreeTxRxRingMemory
[ 3810.532913] userif-2: sent link down event.
[ 3810.532920] userif-2: sent link up event.
[ 3825.651882] usb 3-4: USB disconnect, device number 2
[ 3825.651953] rtusb_disconnect: unregister usbnet usb-0000:00:16.2-4
[ 3825.651956] RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
[ 3825.680656]  RTUSB disconnect successfully
[ 3831.957491] usb 3-4: new high-speed USB device number 3 using ehci-pci
[ 3832.105340] usb 3-4: New USB device found, idVendor=0b05, idProduct=17e8
[ 3832.105348] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3832.105354] usb 3-4: Product: 802.11 n WLAN
[ 3832.105358] usb 3-4: Manufacturer: Ralink
[ 3832.105361] usb 3-4: SerialNumber: 1.0
[ 3832.107147]
[ 3832.107147]
[ 3832.107147] === pAd = ffffc90013b95000, size = 598032 ===
[ 3832.107147]
[ 3832.107293] <-- RTMPAllocAdapterBlock, Status=0
[ 3832.108084] Efuse Size=0x2d [2d0-2fc]
[ 3832.108443] NVM is EFUSE
[ 3846.008874] NICLoadFirmware: We need to load firmware
[ 3846.267083] <-- RTMPAllocTxRxRingMemory, Status=0
[ 3846.267324] RTMP_TimerListAdd: add timer obj ffffc90013bdef30!
[ 3846.267328] RTMP_TimerListAdd: add timer obj ffffc90013bdefa8!
[ 3846.267332] RTMP_TimerListAdd: add timer obj ffffc90013bdf020!
[ 3846.267336] RTMP_TimerListAdd: add timer obj ffffc90013bdeeb8!
[ 3846.267341] RTMP_TimerListAdd: add timer obj ffffc90013bded50!
[ 3846.267344] RTMP_TimerListAdd: add timer obj ffffc90013bdedc8!
[ 3846.267347] RTMP_TimerListAdd: add timer obj ffffc90013ba8a38!
[ 3846.267350] RTMP_TimerListAdd: add timer obj ffffc90013b979f0!
[ 3846.267353] RTMP_TimerListAdd: add timer obj ffffc90013b97a70!
[ 3846.267355] RTMP_TimerListAdd: add timer obj ffffc90013ba8bc8!
[ 3846.267360] RTMP_TimerListAdd: add timer obj ffffc90013ba8948!
[ 3846.267364] RTMP_TimerListAdd: add timer obj ffffc90013ba8b48!
[ 3846.269312] -->RTUSBVenderReset
[ 3846.269437] <--RTUSBVenderReset
[ 3846.526759] Key1Str is Invalid key length(0) or Type(0)
[ 3846.526781] Key2Str is Invalid key length(0) or Type(0)
[ 3846.526802] Key3Str is Invalid key length(0) or Type(0)
[ 3846.526823] Key4Str is Invalid key length(0) or Type(0)
[ 3846.527217] 1. Phy Mode = 5
[ 3846.527220] 2. Phy Mode = 5
[ 3846.527224] NVM is Efuse and its size =2d[2d0-2fc]
[ 3846.578923] phy mode> Error! The chip does not support 5G band 15!
[ 3846.579047] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 3846.612504] 3. Phy Mode = 9
[ 3846.615000] \x1b[mAntCfgInit: primary/secondary ant 0/1
[ 3846.615000] \x1b[mNICInitRT5390RFRegisters: Initialize frequency - EEPROM = 41, RF_R17 = 0
[ 3846.661813] bAutoTxAgcG = 1
[ 3846.668185] ---> InitFrequencyCalibration
[ 3846.670181] InitFrequencyCalibration: frequency offset in the EEPROM = 41
[ 3846.670185] <--- InitFrequencyCalibration
[ 3846.673926] MCS Set = ff ff 00 00 01
[ 3846.684506] <==== rt28xx_init, Status=0
[ 3846.686277] 0x1300 = 00064300
[ 3846.886371] userif-2: sent link down event.
[ 3846.886379] userif-2: sent link up event.
[ 3964.609662] ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 1463
[ 4051.855059] ERROR!!! RTMPSetTimer failed, Halt in Progress!
[ 4052.050993] ---> RTMPFreeTxRxRingMemory
[ 4052.051036] <--- RTMPFreeTxRxRingMemory
[ 4052.253162] userif-2: sent link down event.
[ 4052.253167] userif-2: sent link up event.
[ 4054.028076] RtmpAsicLoadFirmware: ver 21/21, sum cdf7/cdf7, mac cdf72100
[ 4054.028199] NICLoadFirmware: firmware loaded already
[ 4054.030139] <-- RTMPAllocTxRxRingMemory, Status=0
[ 4054.030421] RTMP_TimerListAdd: add timer obj ffffc90013bdef30!
[ 4054.030425] RTMP_TimerListAdd: add timer obj ffffc90013bdefa8!
[ 4054.030428] RTMP_TimerListAdd: add timer obj ffffc90013bdf020!
[ 4054.030432] RTMP_TimerListAdd: add timer obj ffffc90013bdeeb8!
[ 4054.030437] RTMP_TimerListAdd: add timer obj ffffc90013bded50!
[ 4054.030440] RTMP_TimerListAdd: add timer obj ffffc90013bdedc8!
[ 4054.030443] RTMP_TimerListAdd: add timer obj ffffc90013ba8a38!
[ 4054.030446] RTMP_TimerListAdd: add timer obj ffffc90013b979f0!
[ 4054.030449] RTMP_TimerListAdd: add timer obj ffffc90013b97a70!
[ 4054.030452] RTMP_TimerListAdd: add timer obj ffffc90013ba8bc8!
[ 4054.030456] RTMP_TimerListAdd: add timer obj ffffc90013ba8948!
[ 4054.030460] RTMP_TimerListAdd: add timer obj ffffc90013ba8b48!
[ 4054.032309] -->RTUSBVenderReset
[ 4054.032455] <--RTUSBVenderReset
[ 4054.289786] CfgSetCountryRegion():CountryRegion in eeprom was programmed
[ 4054.323473] Key1Str is Invalid key length(0) or Type(0)
[ 4054.323496] Key2Str is Invalid key length(0) or Type(0)
[ 4054.323516] Key3Str is Invalid key length(0) or Type(0)
[ 4054.323540] Key4Str is Invalid key length(0) or Type(0)
[ 4054.323940] 1. Phy Mode = 5
[ 4054.323943] 2. Phy Mode = 5
[ 4054.323947] NVM is Efuse and its size =2d[2d0-2fc]
[ 4054.375384] phy mode> Error! The chip does not support 5G band 15!
[ 4054.375505] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 4054.408967] 3. Phy Mode = 9
[ 4054.411461] \x1b[mAntCfgInit: primary/secondary ant 0/1
[ 4054.411461] \x1b[mNICInitRT5390RFRegisters: Initialize frequency - EEPROM = 41, RF_R17 = 41
[ 4054.454905] bAutoTxAgcG = 1
[ 4054.461022] ---> InitFrequencyCalibration
[ 4054.463020] InitFrequencyCalibration: frequency offset in the EEPROM = 41
[ 4054.463024] <--- InitFrequencyCalibration
[ 4054.466767] MCS Set = ff ff 00 00 01
[ 4054.477340] <==== rt28xx_init, Status=0
[ 4054.479250] 0x1300 = 00064300
[ 4054.679594] userif-2: sent link down event.
[ 4054.679601] userif-2: sent link up event.
[ 4107.029521] ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 1288


[heartsmagic]

Anlaşılan bu kart her çekirdek yükselmesiyle yeni yeni sorunlar çıkartacak kullanıcılarına. Şu Ralink'in az biraz daha özenli olmasını isterdim bu konuda. Açıkçası sen mevcut çözümün de üzerinde bir şeyler denemişsin, o kadarını keşfetmek bile hatırı sayılır bir şey. Yapılandırma dosyası başka kullanıcıda neden sorun yapmıyor da sende sorun yapıyor bilemiyorum, fakat senin de söylediğin üzere esas sorun sistemin çakılması. O konuda ne yapılabilir? Bir üst sürümden daha güncel çekirdek deneyebilirsin, belki orada bu sorun oluşmaz.

[heyyo]

"Readme" dosyasını biraz daha dikkatli okuyarak ilk problemimi çözdüm. Yalnız donma problemi aynen devam ediyor.

Meğer NetworkManager ile kullanabilmek için os/linux/config.mk dosyasında şu parametreleri ayarlamak gerekiyormuş.

Kod Seç Genişlet


HAS_WPA_SUPPLICANT=y
HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y


Bu satırları değiştirip derledikten sonra, adaptör NetworkManager tarafından listelendi ve grafik arayüz üzerinden bağlantı kurabildim. Hatta ping atarak bağlantının çalıştığını gördüm, yalnız web tarayıcıyı açmamla bilgisayar yine kilitlendi. Yani sorun devam ediyor.

Şimdi çekirdek güncellemeye bakacağım.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 15 Aralık 2014 - 22:32:12
Çekirdeği 3.18'e (3.18.0-031800) güncelledim. Sürücüyü kurmadan çalıştı. Demek ki söylentiler doğru, cihazın sürücüsü çekirdeğin yeni sürümlerine eklenmiş. Daha bir kaç dakika oldu ama herhangi bir kilitlenme vs. söz konusu değil.

Çekirdeği şu sayfadaki yönergelerle güncelledim: http://ubuntuhandbook.org/index.php/2014/12/install-linux-kernel-3-18-ubuntu/ .

Meraklısı için güncellemeden sonraki lsmod:

Kod Seç Genişlet


Module                  Size  Used by
ctr                    13193  1
ccm                    17856  1
arc4                   12573  2
rt2800usb              27380  0
rt2x00usb              20886  1 rt2800usb
rt2800lib              95583  1 rt2800usb
rt2x00lib              56113  3 rt2x00usb,rt2800lib,rt2800usb
mac80211              697159  3 rt2x00lib,rt2x00usb,rt2800lib
cfg80211              520257  2 mac80211,rt2x00lib
crc_ccitt              12707  1 rt2800lib
vmw_vsock_vmci_transport    30794  0
vsock                  35060  1 vmw_vsock_vmci_transport
vmw_vmci               68535  1 vmw_vsock_vmci_transport
rfcomm                 75066  4
bnep                   23980  2
bluetooth             486890  10 bnep,rfcomm
binfmt_misc            17501  1
mxm_wmi                13021  0
kvm_amd                60939  0
uvcvideo               86723  0
kvm                   475237  1 kvm_amd
joydev                 17587  0
videobuf2_vmalloc      13216  1 uvcvideo
videobuf2_memops       13362  1 videobuf2_vmalloc
videobuf2_core         51547  1 uvcvideo
v4l2_common            15715  1 videobuf2_core
crct10dif_pclmul       14268  0
videodev              163831  3 uvcvideo,v4l2_common,videobuf2_core
crc32_pclmul           13180  0
media                  22008  2 uvcvideo,videodev
snd_usb_audio         164264  3
ghash_clmulni_intel    13230  0
snd_usbmidi_lib        30597  1 snd_usb_audio
aesni_intel           169686  2
aes_x86_64             17131  1 aesni_intel
lrw                    13323  1 aesni_intel
gf128mul               14951  1 lrw
snd_hda_codec_realtek    80420  1
glue_helper            14095  1 aesni_intel
ablk_helper            13597  1 aesni_intel
snd_hda_codec_generic    69995  1 snd_hda_codec_realtek
snd_hda_codec_hdmi     52670  1
cryptd                 20531  3 ghash_clmulni_intel,aesni_intel,ablk_helper
fglrx                8085360  119
cdc_acm                33090  0
edac_core              52405  0
snd_hda_intel          30824  5
serio_raw              13483  0
edac_mce_amd           22800  0
snd_hda_controller     32234  1 snd_hda_intel
fam15h_power           13160  0
snd_hda_codec         144641  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
k10temp                13279  0
snd_seq_midi           13564  0
snd_hwdep              17709  2 snd_usb_audio,snd_hda_codec
sp5100_tco             14134  0
snd_seq_midi_event     14899  1 snd_seq_midi
snd_pcm               106273  5 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
i2c_piix4              22311  0
snd_rawmidi            31197  2 snd_usbmidi_lib,snd_seq_midi
tpm_infineon           17169  0
8250_fintek            12925  0
snd_seq                63540  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              30118  2 snd_pcm,snd_seq
snd                    84025  29 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
soundcore              15091  2 snd,snd_hda_codec
amd_iommu_v2           19058  1 fglrx
mac_hid                13275  0
wmi                    19379  1 mxm_wmi
parport_pc             32909  0
ppdev                  17711  0
it87                   47434  0
hwmon_vid              12827  1 it87
lp                     17799  0
parport                42481  3 lp,ppdev,parport_pc
hid_generic            12559  0
usbhid                 53155  0
hid                   110572  2 hid_generic,usbhid
pata_acpi              13053  0
firewire_ohci          45300  0
r8169                  86907  0
firewire_core          69403  1 firewire_ohci
mii                    13981  1 r8169
crc_itu_t              12707  1 firewire_core
pata_atiixp            13279  0
ahci                   34220  5
libahci                32353  1 ahci


[heartsmagic]

Geçmiş olsun @heyyo. Konuyu etiketlesek mi? cozuldukonusu