[Çözüldü] Açılış olması gerekenden uzun sürüyor

[libertaria]

Merhaba
Bilgisayarım her açılışında 56 saniye süren siyah bir ekranda oluşan kodların sürekli geçmesi sonrasında açılıyor.Bu durumdan acayip kıl kapmaya başladım.Bununla birlikte bilgisayarımda kullandığım internetten kullandığım dosyalara ve hatta videolara ve resimlere kadar aşırı bir şekilde yavaşlama görüyorum.Ben 15 saniye süresinde bilgisayarı açarken şimdi dakikalar sürüyor.Aynı durum bilgisayar kapanırkende gerçekleşiyor.
Yardım ederseniz sevinirim beyler. (Umarım konu yanlış yerde değildir.)

Kod Seç Genişlet

dmesg

Kod Seç Genişlet

[    1.390964] ohci-platform: OHCI generic platform driver
[    1.404567] uhci_hcd: USB Universal Host Controller Interface driver
[    1.418302] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.431711] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.445279] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000080e0
[    1.458776] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.472323] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.485867] usb usb3: Product: UHCI Host Controller
[    1.499422] usb usb3: Manufacturer: Linux 3.13.0-41-generic uhci_hcd
[    1.512814] usb usb3: SerialNumber: 0000:00:1a.0
[    1.525889] hub 3-0:1.0: USB hub found
[    1.538693] hub 3-0:1.0: 2 ports detected
[    1.551605] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.564448] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.577627] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000080c0
[    1.590755] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.604039] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.617322] usb usb4: Product: UHCI Host Controller
[    1.630570] usb usb4: Manufacturer: Linux 3.13.0-41-generic uhci_hcd
[    1.643745] usb usb4: SerialNumber: 0000:00:1a.1
[    1.656853] hub 4-0:1.0: USB hub found
[    1.669794] hub 4-0:1.0: 2 ports detected
[    1.682845] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.695751] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.708911] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000080a0
[    1.722066] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.735246] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.748448] usb usb5: Product: UHCI Host Controller
[    1.761486] usb usb5: Manufacturer: Linux 3.13.0-41-generic uhci_hcd
[    1.774620] usb usb5: SerialNumber: 0000:00:1d.0
[    1.787754] hub 5-0:1.0: USB hub found
[    1.800719] hub 5-0:1.0: 2 ports detected
[    1.813912] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.826970] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    1.840209] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008080
[    1.853333] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.866689] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.880367] usb usb6: Product: UHCI Host Controller
[    1.893698] usb usb6: Manufacturer: Linux 3.13.0-41-generic uhci_hcd
[    1.907135] usb usb6: SerialNumber: 0000:00:1d.1
[    1.920488] hub 6-0:1.0: USB hub found
[    1.933610] hub 6-0:1.0: 2 ports detected
[    1.946638] usb 2-4: new high-speed USB device number 3 using ehci-pci
[    1.946848] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.946853] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    1.946877] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00008060
[    1.946923] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.946925] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.946926] usb usb7: Product: UHCI Host Controller
[    1.946928] usb usb7: Manufacturer: Linux 3.13.0-41-generic uhci_hcd
[    1.946929] usb usb7: SerialNumber: 0000:00:1d.2
[    1.947015] hub 7-0:1.0: USB hub found
[    1.947021] hub 7-0:1.0: 2 ports detected
[    1.947252] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.947256] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    1.947292] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00008040
[    1.947337] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.947339] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.947340] usb usb8: Product: UHCI Host Controller
[    1.947342] usb usb8: Manufacturer: Linux 3.13.0-41-generic uhci_hcd
[    1.947343] usb usb8: SerialNumber: 0000:00:1d.3
[    1.947420] hub 8-0:1.0: USB hub found
[    1.947428] hub 8-0:1.0: 2 ports detected
[    1.947570] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    1.971190] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.971195] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.971310] mousedev: PS/2 mouse device common for all mice
[    1.972504] rtc_cmos 00:03: RTC can wake from S4
[    1.972632] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.972658] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.972731] device-mapper: uevent: version 1.0.3
[    1.972792] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.972799] ledtrig-cpu: registered to indicate activity on CPUs
[    1.972911] TCP: cubic registered
[    1.972913] IPv6: Loaded, but administratively disabled, reboot required to enable
[    1.972915] NET: Registered protocol family 17
[    1.972933] Key type dns_resolver registered
[    1.973118] Loading compiled-in X.509 certificates
[    1.974266] Loaded X.509 cert 'Magrathea: Glacier signing key: b804a224c507bf339f382f8173aa07c20d99d06b'
[    1.974282] registered taskstats version 1
[    2.451660] Key type trusted registered
[    2.467622] Key type encrypted registered
[    2.483304] AppArmor: AppArmor sha1 policy hashing enabled
[    2.497133] IMA: No TPM chip found, activating TPM-bypass!
[    2.511210] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.511700] regulator-dummy: disabling
[    2.539764]   Magic number: 10:604:545
[    2.553814] tty ttyS21: hash matches
[    2.568010] rtc_cmos 00:03: setting system clock to 2014-12-01 19:32:08 UTC (1417462328)
[    2.582926] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.597467] EDD information not available.
[    2.611900] PM: Hibernation image not present or could not be loaded.
[    2.613569] Freeing unused kernel memory: 1340K (ffffffff81d20000 - ffffffff81e6f000)
[    2.628579] Write protecting the kernel read-only data: 12288k
[    2.646206] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
[    2.646213] usb 2-4: New USB device found, idVendor=0408, idProduct=03f1
[    2.646215] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.646217] usb 2-4: Product: HP Webcam
[    2.646218] usb 2-4: Manufacturer: SN001
[    2.723592] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
[    2.766466] systemd-udevd[103]: starting version 204
[    2.821570] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.821855] r8169 0000:03:00.0: irq 46 for MSI/MSI-X
[    2.821978] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc90000652000, 00:26:9e:22:f0:ab, XID 1c4000c0 IRQ 46
[    2.821979] r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    2.829149] sdhci: Secure Digital Host Controller Interface driver
[    2.829150] sdhci: Copyright(c) Pierre Ossman
[    2.830727] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
[    2.830833] sdhci-pci 0000:06:00.1: dummy supplies not allowed
[    2.830834] mmc0: no vqmmc regulator found
[    2.830835] sdhci-pci 0000:06:00.1: dummy supplies not allowed
[    2.830836] mmc0: no vmmc regulator found
[    2.830904] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
[    2.830916] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[    2.830975] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[    2.994218] ahci 0000:00:1f.2: version 3.0
[    2.994422] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[    2.994472] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.994501] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    2.994503] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[    3.062722] firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 0 IT contexts, quirks 0x10
[    3.081278] scsi0 : ahci
[    3.081400] scsi1 : ahci
[    3.081503] scsi2 : ahci
[    3.081607] scsi3 : ahci
[    3.081706] scsi4 : ahci
[    3.081807] scsi5 : ahci
[    3.081888] ata1: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105100 irq 47
[    3.081890] ata2: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105180 irq 47
[    3.081891] ata3: DUMMY
[    3.081892] ata4: DUMMY
[    3.081894] ata5: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105300 irq 47
[    3.081896] ata6: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105380 irq 47
[    3.416100] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[    3.580094] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.595036] usb 6-1: New USB device found, idVendor=138a, idProduct=0001
[    3.609934] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.609946] ata1.00: ATA-8: ST9320325AS, 0005HPM1, max UDMA/100
[    3.609947] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.663448] ata1.00: configured for UDMA/100
[    3.678023] scsi 0:0:0:0: Direct-Access     ATA      ST9320325AS      0005 PQ: 0 ANSI: 5
[    3.692747] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    3.707394] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.707404] sd 0:0:0:0: [sda] Write Protect is off
[    3.707406] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.707423] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.796197] firewire_core 0000:06:00.0: created device fw0: GUID 00241b00ddca8d01, S400
[    3.849162]  sda: sda2 sda3 sda4 < sda5 >
[    3.864899] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.932116] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[    4.120487] usb 7-2: New USB device found, idVendor=03f0, idProduct=171d
[    4.135346] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.150182] usb 7-2: Product: HP Integrated Module
[    4.164649] usb 7-2: Manufacturer: Broadcom Corp
[    4.240100] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.268336] ata2.00: ATAPI: Optiarc DVD RW AD-7561S, AH03, max UDMA/100
[    4.295913] ata2.00: configured for UDMA/100
[    4.312841] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7561S  AH03 PQ: 0 ANSI: 5
[    4.332104] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.346831] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.361644] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.361737] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    4.399269] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0, board id: 3655, fw id: 428212
[    4.510423] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    4.696034] ata5: SATA link down (SStatus 0 SControl 300)
[    5.028095] ata6: SATA link down (SStatus 0 SControl 300)
[    6.160923] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    6.293199] random: nonblocking pool is initialized
[    8.605825] init: plymouth-upstart-bridge main process (169) terminated with status 1
[    8.622705] init: plymouth-upstart-bridge main process ended, respawning
[   21.766934] systemd-udevd[288]: starting version 204
[   21.969044] lp: driver loaded but no devices found
[   21.978865] ppdev: user-space parallel port driver
[   21.996508] hp_accel: laptop model unknown, using default axes configuration
[   22.003367] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   22.005625] ACPI Error: [_T_2] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dswload2-330)
[   22.005632] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20131115/psobject-222)
[   22.005636] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD_.GBQC] (Node ffff8800bae71758), AE_ALREADY_EXISTS (20131115/psparse-536)
[   22.005643] ACPI: Marking method GBQC as Serialized because of AE_ALREADY_EXISTS error
[   22.005647] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD_._BQC] (Node ffff8800bae71730), AE_ALREADY_EXISTS (20131115/psparse-536)
[   22.005652] ACPI: Marking method _BQC as Serialized because of AE_ALREADY_EXISTS error
[   22.005656] ACPI Warning: Evaluating _BQC failed (20131115/video-681)
[   22.010623] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xd2
[   22.010626] ene_ir: PLL freq = 1406
[   22.010628] ene_ir: KB3926D or higher detected
[   22.010641] ene_ir: Firmware regs: 00 00
[   22.010642] ene_ir: Hardware features:
[   22.010643] ene_ir: * Uses GPIO 40 for IR demodulated input
[   22.012179] lis3lv02d: 8 bits sensor found
[   22.017689] acpi device:08: registered as cooling_device2
[   22.019642] ACPI Error: [_T_2] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dswload2-330)
[   22.019649] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20131115/psobject-222)
[   22.019653] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD1.GBQC] (Node ffff8800bae719d8), AE_ALREADY_EXISTS (20131115/psparse-536)
[   22.019659] ACPI: Marking method GBQC as Serialized because of AE_ALREADY_EXISTS error
[   22.019663] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD1._BQC] (Node ffff8800bae719b0), AE_ALREADY_EXISTS (20131115/psparse-536)
[   22.019668] ACPI: Marking method _BQC as Serialized because of AE_ALREADY_EXISTS error
[   22.019672] ACPI Warning: Evaluating _BQC failed (20131115/video-681)
[   22.026285] acpi device:0a: registered as cooling_device3
[   22.026351] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input8
[   22.036023] Registered IR keymap rc-rc6-mce
[   22.036104] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input7
[   22.036217] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[   22.044144] IR NEC protocol handler initialized
[   22.046112] IR RC5(x) protocol handler initialized
[   22.054565] IR RC6 protocol handler initialized
[   22.058287] IR JVC protocol handler initialized
[   22.070866] [drm] Initialized drm 1.1.0 20060810
[   22.073752] IR Sony protocol handler initialized
[   22.091738] IR SANYO protocol handler initialized
[   22.113318] IR MCE Keyboard/mouse protocol handler initialized
[   22.117184] cfg80211: Calling CRDA to update world regulatory domain
[   22.128485] lirc_dev: IR Remote Control driver registered, major 250
[   22.130133] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input9
[   22.130294] ene_ir: driver has been successfully loaded
[   22.130319] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[   22.130321] IR LIRC bridge handler initialized
[   22.138559] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMBA 1 (20131115/utaddress-251)
[   22.138567] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   22.138571] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   22.138575] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   22.138601] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   22.140371] [drm] radeon kernel modesetting enabled.
[   22.140442] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[   22.140444] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[   22.140467] Console: switching to colour dummy device 80x25
[   22.141573] [drm] initializing kernel modesetting (RV730 0x1002:0x9480 0x103C:0x3628).
[   22.141593] [drm] register mmio base: 0xDA000000
[   22.141595] [drm] register mmio size: 65536
[   22.141695] ATOM BIOS: HP_Quanta_Jones_Cujo_M96M_DDR3
[   22.141738] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   22.141741] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[   22.141743] [drm] Detected VRAM RAM=1024M, BAR=256M
[   22.141744] [drm] RAM width 128bits DDR
[   22.141976] [TTM] Zone  kernel: Available graphics memory: 1539720 kiB
[   22.141978] [TTM] Initializing pool allocator
[   22.141983] [TTM] Initializing DMA pool allocator
[   22.142004] [drm] radeon: 1024M of VRAM memory ready
[   22.142006] [drm] radeon: 1024M of GTT memory ready.
[   22.142018] [drm] Loading RV730 Microcode
[   22.148602] type=1400 audit(1417455148.077:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=360 comm="apparmor_parser"
[   22.148611] type=1400 audit(1417455148.077:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=360 comm="apparmor_parser"
[   22.148616] type=1400 audit(1417455148.077:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=360 comm="apparmor_parser"
[   22.149078] type=1400 audit(1417455148.077:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=360 comm="apparmor_parser"
[   22.149084] type=1400 audit(1417455148.077:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=360 comm="apparmor_parser"
[   22.149320] type=1400 audit(1417455148.077:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=360 comm="apparmor_parser"
[   22.152932] Intel(R) Wireless WiFi driver for Linux, in-tree:
[   22.152936] Copyright(c) 2003-2013 Intel Corporation
[   22.155096] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X
[   22.179347] WARNING! power/level is deprecated; use power/control instead
[   22.203547] Bluetooth: Core ver 2.17
[   22.203572] NET: Registered protocol family 31
[   22.203574] Bluetooth: HCI device and connection manager initialized
[   22.203583] Bluetooth: HCI socket layer initialized
[   22.203585] Bluetooth: L2CAP socket layer initialized
[   22.203594] Bluetooth: SCO socket layer initialized
[   22.208881] usbcore: registered new interface driver btusb
[   22.216924] ip_tables: (C) 2000-2006 Netfilter Core Team
[   22.228904] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   22.240087] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input10
[   22.240363] wmi: Mapper loaded
[   22.260167] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   22.306427] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[   22.334810] mute LED gpio 8 polarity 1
[   22.335019] autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0) type:line
[   22.335021]    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[   22.335023]    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   22.335024]    mono: mono_out=0x0
[   22.335026]    dig-out=0x1e/0x0
[   22.335027]    inputs:
[   22.338122]      Internal Mic=0x18
[   22.338127]      Mic=0xb
[   22.413060] Linux video capture interface: v2.00
[   22.425907] input: HDA Intel Front Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   22.427049] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   22.456719] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
[   22.510176] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   22.510181] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   22.510183] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   22.510185] iwlwifi 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[   22.512130] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   22.518136] uvcvideo: Found UVC 1.00 device HP Webcam (0408:03f1)
[   22.576130] gpio_ich: GPIO from 195 to 255 on gpio_ich
[   22.583443] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   22.595331] input: HP WMI hotkeys as /devices/virtual/input/input13
[   22.635198] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input14
[   22.635377] usbcore: registered new interface driver uvcvideo
[   22.635380] USB Video Class driver (1.1.1)
[   22.665542] cfg80211: World regulatory domain updated:
[   22.665546] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   22.665548] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.665550] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.665552] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   22.665554] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.665556] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.682085] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   22.687845] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[   22.687895] radeon 0000:01:00.0: WB enabled
[   22.687899] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800aa7dfc00
[   22.687902] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800aa7dfc0c
[   22.688772] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc9000511c598
[   22.689145] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   22.689147] [drm] Driver supports precise vblank timestamp query.
[   22.689179] radeon 0000:01:00.0: irq 50 for MSI/MSI-X
[   22.689197] radeon 0000:01:00.0: radeon: using MSI.
[   22.689230] [drm] radeon: irq initialized.
[   22.744417] [drm] ring test on 0 succeeded in 1 usecs
[   22.744427] [drm] ring test on 3 succeeded in 3 usecs
[   22.929044] [drm] ring test on 5 succeeded in 1 usecs
[   22.929053] [drm] UVD initialized successfully.
[   22.929200] [drm] Enabling audio 0 support
[   22.929224] [drm] ib test on ring 0 succeeded in 0 usecs
[   22.929243] [drm] ib test on ring 3 succeeded in 0 usecs
[   23.078618] [drm] ib test on ring 5 succeeded
[   23.079078] [drm] radeon atom DIG backlight initialized
[   23.079080] [drm] Radeon Display Connectors
[   23.079081] [drm] Connector 0:
[   23.079083] [drm]   LVDS-1
[   23.079085] [drm]   DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
[   23.079086] [drm]   Encoders:
[   23.079087] [drm]     LCD1: INTERNAL_UNIPHY2
[   23.079089] [drm] Connector 1:
[   23.079090] [drm]   VGA-1
[   23.079092] [drm]   DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac
[   23.079093] [drm]   Encoders:
[   23.079094] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   23.079096] [drm] Connector 2:
[   23.079097] [drm]   HDMI-A-1
[   23.079098] [drm]   HPD1
[   23.079100] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   23.079101] [drm]   Encoders:
[   23.079102] [drm]     DFP1: INTERNAL_UNIPHY
[   23.083803] [drm] radeon: dpm initialized
[   23.117566] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   23.695698] init: failsafe main process (665) killed by TERM signal
[   24.071266] [drm] fb mappable at 0xC045E000
[   24.071269] [drm] vram apper at 0xC0000000
[   24.071271] [drm] size 4325376
[   24.071272] [drm] fb depth is 24
[   24.071273] [drm]    pitch is 5632
[   24.071417] fbcon: radeondrmfb (fb0) is primary device
[   24.120672] Console: switching to colour frame buffer device 170x48
[   24.130076] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   24.130078] radeon 0000:01:00.0: registered panic notifier
[   24.130140] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[   24.130263] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   24.130265] hda-intel 0000:01:00.1: Using LPIB position fix
[   24.130325] snd_hda_intel 0000:01:00.1: irq 51 for MSI/MSI-X
[   24.138953] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[   24.143661] HDMI ATI/AMD: no speaker allocation for ELD
[   24.143730] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[   24.477383] type=1400 audit(1417455150.405:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=740 comm="apparmor_parser"
[   24.477392] type=1400 audit(1417455150.405:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=740 comm="apparmor_parser"
[   24.478156] type=1400 audit(1417455150.405:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=740 comm="apparmor_parser"
[   24.770796] init: cups main process (744) killed by HUP signal
[   24.770805] init: cups main process ended, respawning
[   24.959771] type=1400 audit(1417455150.885:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=820 comm="apparmor_parser"
[   25.129120] Bluetooth: RFCOMM TTY layer initialized
[   25.129133] Bluetooth: RFCOMM socket layer initialized
[   25.129140] Bluetooth: RFCOMM ver 1.11
[   25.178681] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   25.178685] Bluetooth: BNEP filters: protocol multicast
[   25.178695] Bluetooth: BNEP socket layer initialized
[   27.726283] Ebtables v2.0 registered
[   27.740608] Bridge firewalling registered
[   27.903539] init: samba-ad-dc main process (1067) terminated with status 1
[   28.824231] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   28.827127] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   28.926954] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   28.929873] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   28.973331] r8169 0000:03:00.0 eth0: link down
[   32.175812] wlan0: authenticate with a4:99:47:59:02:1c
[   32.177701] wlan0: send auth to a4:99:47:59:02:1c (try 1/3)
[   32.180026] wlan0: authenticated
[   32.184039] wlan0: associate with a4:99:47:59:02:1c (try 1/3)
[   32.188025] wlan0: RX AssocResp from a4:99:47:59:02:1c (capab=0x431 status=0 aid=2)
[   32.196695] wlan0: associated
[   32.196757] cfg80211: Calling CRDA for country: TR
[   32.199510] cfg80211: Regulatory domain changed to country: TR
[   32.199514] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   32.199516] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   32.199518] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   32.199520] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   32.199522] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[   34.236318] init: plymouth-upstart-bridge main process ended, respawning
[   35.618797] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[   54.573882] audit_printk_skb: 162 callbacks suppressed
[   54.573886] type=1400 audit(1417455179.514:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2303 comm="apparmor_parser"
[   54.573894] type=1400 audit(1417455179.514:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2303 comm="apparmor_parser"
[   54.574361] type=1400 audit(1417455179.514:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2303 comm="apparmor_parse

[heartsmagic]

İki yerde bekleme yapıyor sanki. Plymouth özelleştirmen var mı? İkinci yerse Iptables ile ilgili gibi, o yönde bir yapılandırman var mı?

[libertaria]

Plymouth özelleştirmem yok varsa da bu dediğinizi ilk kez duyuyorum.Iptables içinde aynısı geçerli.

[heartsmagic]

Kod Seç Genişlet

echo "sleep 2" | sudo tee -a /etc/init/plymouth-upstart-bridge.conf
komutundan sonra:

Kod Seç Genişlet

cat /etc/init/plymouth-upstart-bridge.conf komutunu uygula, son satırda "sleep 2" yazmazsı lazım (tırnaklar olmadan). Sonra sistemi yeniden başlat, ardından dmesg çıktısını tekrar buraya aktar bakalım Plymouth kısmında iyileşme olacak mı.

İkinci mesele içinse şunu deneyelim:

Kod Seç Genişlet

sudo -H gedit  /etc/default/grub ile dosyayı aç, aşağıdaki satırı:

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"

şu şekle getir

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nf_conntrack.nf_conntrack_helper=0"

Ardından:

Kod Seç Genişlet

sudo update-grub

Sonra sistemi yeniden başlat, dmesg çıktısını buraya aktar. İki işlemi yapıp sonra sistemi yeniden başlatabilirsin elbette.

[libertaria]

Evet hocam dediğiniz gibi uygulamaların hepsini teker teker yaptım ve bigisayarımdaki açılış süresi kısaldı kod ekranı geçmiyor ama 10 saniye sürecinde siyah ekran donup devam ediyor kullanıcı ekranına (şifre bölümüne) giriyor.Ben ubuntu'yu ilk kurduğumda tabiri caizse canavar gibiydi bilgisayar ama nedense yavaşlama hissediyorum.(Bu konuyu yeni bir konuda paylaşmamı ister misiniz).Evet diyeceksiniz ki hissetmek var hissetmek var. Zaten başıma ne geldiyse şu photorec programı yüzünden geldi.

Kod Seç Genişlet

dmesg

Kod Seç Genişlet

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-41-generic (buildd@lamiak) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #70-Ubuntu SMP Tue Nov 25 14:40:34 UTC 2014 (Ubuntu 3.13.0-41.70-generic 3.13.11.11)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-41-generic root=UUID=3861b08e-31fb-4746-b224-b9bd8ce11c42 ro ipv6.disable=1 quiet splash nf_conntrack.nf_conntrack_helper=0 vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfca7fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfca8000-0x00000000bfcbefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bfcbf000-0x00000000bfd80fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfd81000-0x00000000bfdbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfdbf000-0x00000000bfddefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfddf000-0x00000000bfdf6fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bfdf7000-0x00000000bfdfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion dv6 Notebook PC/3628, BIOS F.45 05/18/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[    0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[    0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbfa00000-0xbfbfffff]
[    0.000000]  [mem 0xbfa00000-0xbfbfffff] page 2M
[    0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbc000000-0xbf9fffff]
[    0.000000]  [mem 0xbc000000-0xbf9fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x80000000-0xbbffffff]
[    0.000000]  [mem 0x80000000-0xbbffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x7fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0xbfc00000-0xbfca7fff]
[    0.000000]  [mem 0xbfc00000-0xbfca7fff] page 4k
[    0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbfcbf000-0xbfd80fff]
[    0.000000]  [mem 0xbfcbf000-0xbfd80fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbfdbf000-0xbfddefff]
[    0.000000]  [mem 0xbfdbf000-0xbfddefff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbfdf7000-0xbfdfffff]
[    0.000000]  [mem 0xbfdf7000-0xbfdfffff] page 4k
[    0.000000] RAMDISK: [mem 0x35b52000-0x36da0fff]
[    0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 00000000bfdf6120 00006C (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 00000000bfdf4000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 00000000bfde2000 00DD3E (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: FACS 00000000bfd8d000 000040
[    0.000000] ACPI: DMAR 00000000bfdf5000 000040 (v01               ? 00000001      00000000)
[    0.000000] ACPI: HPET 00000000bfdf3000 000038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 00000000bfdf2000 00006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 00000000bfdf1000 00003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: ASF! 00000000bfdf0000 0000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 00000000bfde1000 000176 (v01 HPQOEM SLIC-MPC 06040000  LTP 00000001)
[    0.000000] ACPI: BOOT 00000000bfde0000 000028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 00000000bfddf000 000655 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bfdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0xbfdfffff]
[    0.000000]   NODE_DATA [mem 0xbfdfb000-0xbfdfffff]
[    0.000000]  [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bc200000-ffff8800bf1fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0xbfca7fff]
[    0.000000]   node   0: [mem 0xbfcbf000-0xbfd80fff]
[    0.000000]   node   0: [mem 0xbfdbf000-0xbfddefff]
[    0.000000]   node   0: [mem 0xbfdf7000-0xbfdfffff]
[    0.000000] On node 0 totalpages: 785712
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12216 pages used for memmap
[    0.000000]   DMA32 zone: 781715 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfca8000-0xbfcbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfd81000-0xbfdbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfddf000-0xbfdf6fff]
[    0.000000] e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff8800bf800000 s86400 r8192 d24192 u524288
[    0.000000] pcpu-alloc: s86400 r8192 d24192 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 773411
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-41-generic root=UUID=3861b08e-31fb-4746-b224-b9bd8ce11c42 ro ipv6.disable=1 quiet splash nf_conntrack.nf_conntrack_helper=0 vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at /build/buildd/linux-3.13.0/drivers/iommu/dmar.c:488 warn_invalid_dmar+0x7e/0x90()
[    0.000000] Your BIOS is broken; DMAR reported at address 0!
[    0.000000] BIOS vendor: Hewlett-Packard; Ver: F.45; Product Version: Rev 1
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.13.0-41-generic #70-Ubuntu
[    0.000000] Hardware name: Hewlett-Packard HP Pavilion dv6 Notebook PC/3628, BIOS F.45 05/18/2011
[    0.000000]  000000000000000b ffffffff81c01de8 ffffffff81720bf6 ffffffff81c01e30
[    0.000000]  ffffffff81c01e20 ffffffff810677cd ffffffff81fe1010 ffffffff81fe1050
[    0.000000]  0000000000000000 ffffffff81de22c0 ffffffff81c01fb0 ffffffff81c01e80
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81720bf6>] dump_stack+0x45/0x56
[    0.000000]  [<ffffffff810677cd>] warn_slowpath_common+0x7d/0xa0
[    0.000000]  [<ffffffff81067884>] warn_slowpath_fmt_taint+0x44/0x50
[    0.000000]  [<ffffffff81d51369>] ? early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff81d46f8b>] ? __acpi_map_table+0x13/0x18
[    0.000000]  [<ffffffff815f762e>] warn_invalid_dmar+0x7e/0x90
[    0.000000]  [<ffffffff81d8be11>] check_zero_address+0x68/0xf4
[    0.000000]  [<ffffffff81d8beb2>] detect_intel_iommu+0x15/0xae
[    0.000000]  [<ffffffff81d41072>] pci_iommu_alloc+0x4a/0x6c
[    0.000000]  [<ffffffff81d50d06>] mem_init+0x17/0x9c
[    0.000000]  [<ffffffff81d36d3a>] start_kernel+0x202/0x443
[    0.000000]  [<ffffffff81d36941>] ? repair_env_string+0x5c/0x5c
[    0.000000]  [<ffffffff81d36120>] ? early_idt_handlers+0x120/0x120
[    0.000000]  [<ffffffff81d365ee>] x86_64_start_reservations+0x2a/0x2c
[    0.000000]  [<ffffffff81d36733>] x86_64_start_kernel+0x143/0x152
[    0.000000] ---[ end trace 8e2565de7faf4cc9 ]---
[    0.000000] Memory: 3057836K/3142848K available (7383K kernel code, 1144K rwdata, 3408K rodata, 1340K init, 1444K bss, 85012K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] Offload RCU callbacks from all CPUs
[    0.000000] Offload RCU callbacks from CPUs: 0-3.
[    0.000000] NR_IRQS:16640 nr_irqs:712 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 12582912 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2261.491 MHz processor
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.98 BogoMIPS (lpj=9045964)
[    0.004007] pid_max: default: 32768 minimum: 301
[    0.004049] Security Framework initialized
[    0.004074] AppArmor: AppArmor initialized
[    0.004075] Yama: becoming mindful.
[    0.004485] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.009922] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.011083] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.011093] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.011426] Initializing cgroup subsys memory
[    0.011436] Initializing cgroup subsys devices
[    0.011439] Initializing cgroup subsys freezer
[    0.011441] Initializing cgroup subsys blkio
[    0.011443] Initializing cgroup subsys perf_event
[    0.011446] Initializing cgroup subsys hugetlb
[    0.011475] CPU: Physical Processor ID: 0
[    0.011476] CPU: Processor Core ID: 0
[    0.011478] mce: CPU supports 6 MCE banks
[    0.011486] CPU0: Thermal monitoring enabled (TM2)
[    0.011494] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.011494] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[    0.011494] tlb_flushall_shift: -1
[    0.011607] Freeing SMP alternatives memory: 32K (ffffffff81e6f000 - ffffffff81e77000)
[    0.013282] ACPI: Core revision 20131115
[    0.019181] ACPI: All ACPI Tables successfully acquired
[    0.020010] ftrace: allocating 28551 entries in 112 pages
[    0.032115] dmar: Host address width 36
[    0.032119] dmar: DRHD base: 0x00000000000000 flags: 0x1
[    0.032121] dmar: parse DMAR table failure.
[    0.032481] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.073771] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     P7550  @ 2.26GHz (fam: 06, model: 17, stepping: 0a)
[    0.076000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.076000] ... version:                2
[    0.076000] ... bit width:              40
[    0.076000] ... generic registers:      2
[    0.076000] ... value mask:             000000ffffffffff
[    0.076000] ... max period:             000000007fffffff
[    0.076000] ... fixed-purpose events:   3
[    0.076000] ... event mask:             0000000700000003
[    0.076000] x86: Booting SMP configuration:
[    0.076000] .... node  #0, CPUs:      #1
[    0.087407] x86: Booted up 1 node, 2 CPUs
[    0.087410] smpboot: Total of 2 processors activated (9045.96 BogoMIPS)
[    0.087522] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.088129] devtmpfs: initialized
[    0.090064] EVM: security.selinux
[    0.090066] EVM: security.SMACK64
[    0.090067] EVM: security.ima
[    0.090068] EVM: security.capability
[    0.092038] PM: Registering ACPI NVS region [mem 0xbfd81000-0xbfdbefff] (253952 bytes)
[    0.093131] pinctrl core: initialized pinctrl subsystem
[    0.093211] regulator-dummy: no parameters
[    0.093243] RTC time: 17:26:23, date: 12/02/14
[    0.093289] NET: Registered protocol family 16
[    0.093426] cpuidle: using governor ladder
[    0.093428] cpuidle: using governor menu
[    0.093477] ACPI: bus type PCI registered
[    0.093479] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.093550] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.093553] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.096999] PCI: Using configuration type 1 for base access
[    0.097126] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.097128] mtrr: probably your BIOS does not setup all CPUs.
[    0.097129] mtrr: corrected configuration.
[    0.100061] bio: create slab <bio-0> at 0
[    0.100083] ACPI: Added _OSI(Module Device)
[    0.100086] ACPI: Added _OSI(Processor Device)
[    0.100087] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.100089] ACPI: Added _OSI(Processor Aggregator Device)
[    0.103040] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.280358] ACPI: SSDT 00000000bfcb4c98 000223 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.280759] ACPI: Dynamic OEM Table Load:
[    0.280761] ACPI: SSDT           (null) 000223 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.280900] ACPI: SSDT 00000000bfcb2618 0005B3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.281286] ACPI: Dynamic OEM Table Load:
[    0.281289] ACPI: SSDT           (null) 0005B3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.292255] ACPI: SSDT 00000000bfcb3e18 0001CF (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.292669] ACPI: Dynamic OEM Table Load:
[    0.292671] ACPI: SSDT           (null) 0001CF (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.296094] ACPI: SSDT 00000000bfcb4f18 00008D (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.296492] ACPI: Dynamic OEM Table Load:
[    0.296494] ACPI: SSDT           (null) 00008D (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.300874] ACPI: Interpreter enabled
[    0.300874] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.300874] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.300874] ACPI: (supports S0 S3 S4 S5)
[    0.300874] ACPI: Using IOAPIC for interrupt routing
[    0.300874] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.304051] ACPI: No dock devices found.
[    0.313286] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.313286] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.313286] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
[    0.313286] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    0.313286] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.313286] PCI host bridge to bus 0000:00
[    0.313286] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.313286] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.313286] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.313286] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.313286] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[    0.313286] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    0.313286] DMAR: Forcing write-buffer flush capability
[    0.313286] DMAR: Disabling IOMMU for graphics on this chipset
[    0.313286] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[    0.313318] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.313422] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.313475] pci 0000:00:1a.0: reg 0x20: [io  0x80e0-0x80ff]
[    0.313588] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.313626] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.313678] pci 0000:00:1a.1: reg 0x20: [io  0x80c0-0x80df]
[    0.313785] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.313834] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.313860] pci 0000:00:1a.7: reg 0x10: [mem 0xda105c00-0xda105fff]
[    0.313969] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.314018] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.314060] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.314079] pci 0000:00:1b.0: reg 0x10: [mem 0xda100000-0xda103fff 64bit]
[    0.314164] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.314244] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.314331] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.314420] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[    0.314507] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.316016] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.316054] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[    0.316141] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.316225] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[    0.316312] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.316394] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[    0.316482] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.316533] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.316575] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.316627] pci 0000:00:1d.0: reg 0x20: [io  0x80a0-0x80bf]
[    0.316734] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.316775] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.316827] pci 0000:00:1d.1: reg 0x20: [io  0x8080-0x809f]
[    0.316941] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.316993] pci 0000:00:1d.2: reg 0x20: [io  0x8060-0x807f]
[    0.317106] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[    0.317158] pci 0000:00:1d.3: reg 0x20: [io  0x8040-0x805f]
[    0.317281] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.317307] pci 0000:00:1d.7: reg 0x10: [mem 0xda105800-0xda105bff]
[    0.317416] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.317465] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.317500] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.317599] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.317638] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[    0.317829] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[    0.317853] pci 0000:00:1f.2: reg 0x10: [io  0x8108-0x810f]
[    0.317863] pci 0000:00:1f.2: reg 0x14: [io  0x8114-0x8117]
[    0.317873] pci 0000:00:1f.2: reg 0x18: [io  0x8100-0x8107]
[    0.317882] pci 0000:00:1f.2: reg 0x1c: [io  0x8110-0x8113]
[    0.317892] pci 0000:00:1f.2: reg 0x20: [io  0x8020-0x803f]
[    0.317902] pci 0000:00:1f.2: reg 0x24: [mem 0xda105000-0xda1057ff]
[    0.317961] pci 0000:00:1f.2: PME# supported from D3hot
[    0.318037] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.318056] pci 0000:00:1f.3: reg 0x10: [mem 0xda106000-0xda1060ff 64bit]
[    0.318082] pci 0000:00:1f.3: reg 0x20: [io  0x8000-0x801f]
[    0.318177] pci 0000:00:1f.6: [8086:2932] type 00 class 0x118000
[    0.318204] pci 0000:00:1f.6: reg 0x10: [mem 0xda104000-0xda104fff 64bit]
[    0.318406] pci 0000:01:00.0: [1002:9480] type 00 class 0x030000
[    0.318421] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[    0.318433] pci 0000:01:00.0: reg 0x14: [io  0x7000-0x70ff]
[    0.318444] pci 0000:01:00.0: reg 0x18: [mem 0xda000000-0xda00ffff]
[    0.318481] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.318532] pci 0000:01:00.0: supports D1 D2
[    0.318589] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
[    0.318605] pci 0000:01:00.1: reg 0x10: [mem 0xda010000-0xda013fff]
[    0.318709] pci 0000:01:00.1: supports D1 D2
[    0.318777] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.318781] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
[    0.318784] pci 0000:00:01.0:   bridge window [mem 0xda000000-0xda0fffff]
[    0.318788] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.318876] pci 0000:02:00.0: [8086:4237] type 00 class 0x028000
[    0.318913] pci 0000:02:00.0: reg 0x10: [mem 0xd9000000-0xd9001fff 64bit]
[    0.319089] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.324021] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.324026] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
[    0.324030] pci 0000:00:1c.0:   bridge window [mem 0xd9000000-0xd9ffffff]
[    0.324037] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.324200] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.324248] pci 0000:03:00.0: reg 0x10: [io  0x5000-0x50ff]
[    0.324339] pci 0000:03:00.0: reg 0x18: [mem 0xd1010000-0xd1010fff 64bit pref]
[    0.324402] pci 0000:03:00.0: reg 0x20: [mem 0xd1000000-0xd100ffff 64bit pref]
[    0.324441] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.324659] pci 0000:03:00.0: supports D1 D2
[    0.324661] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.324772] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.324869] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.324874] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.324879] pci 0000:00:1c.1:   bridge window [mem 0xd8000000-0xd8ffffff]
[    0.324885] pci 0000:00:1c.1:   bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[    0.324948] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.324953] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.324957] pci 0000:00:1c.3:   bridge window [mem 0xd7000000-0xd7ffffff]
[    0.324964] pci 0000:00:1c.3:   bridge window [mem 0xd2000000-0xd2ffffff 64bit pref]
[    0.325097] pci 0000:06:00.0: [197b:2380] type 00 class 0x0c0010
[    0.325122] pci 0000:06:00.0: reg 0x10: [mem 0xd6000000-0xd60007ff]
[    0.325141] pci 0000:06:00.0: reg 0x14: [mem 0xd6000d00-0xd6000d7f]
[    0.325192] pci 0000:06:00.0: reg 0x20: [mem 0xd6000c80-0xd6000cff]
[    0.325210] pci 0000:06:00.0: reg 0x24: [mem 0xd6000c00-0xd6000c7f]
[    0.325380] pci 0000:06:00.1: [197b:2382] type 00 class 0x088000
[    0.325402] pci 0000:06:00.1: reg 0x10: [mem 0xd6000b00-0xd6000bff]
[    0.325626] pci 0000:06:00.2: [197b:2381] type 00 class 0x080501
[    0.325648] pci 0000:06:00.2: reg 0x10: [mem 0xd6000a00-0xd6000aff]
[    0.325872] pci 0000:06:00.3: [197b:2383] type 00 class 0x088000
[    0.325895] pci 0000:06:00.3: reg 0x10: [mem 0xd6000900-0xd60009ff]
[    0.326120] pci 0000:06:00.4: [197b:2384] type 00 class 0x088000
[    0.326142] pci 0000:06:00.4: reg 0x10: [mem 0xd6000800-0xd60008ff]
[    0.332024] pci 0000:00:1c.4: PCI bridge to [bus 06]
[    0.332029] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.332034] pci 0000:00:1c.4:   bridge window [mem 0xd6000000-0xd6ffffff]
[    0.332041] pci 0000:00:1c.4:   bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
[    0.332139] acpiphp: Slot [1] registered
[    0.332146] pci 0000:00:1c.5: PCI bridge to [bus 07-09]
[    0.332151] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.332155] pci 0000:00:1c.5:   bridge window [mem 0xd5000000-0xd5ffffff]
[    0.332162] pci 0000:00:1c.5:   bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
[    0.332244] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
[    0.332256] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.332258] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.332261] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.332263] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[    0.332485] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.332550] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[    0.332613] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.332674] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.332736] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[    0.332798] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[    0.332860] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[    0.332922] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.333636] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.333646] ACPI: \_SB_.PCI0: notify handler is installed
[    0.333698] Found 1 acpi root devices
[    0.333746] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.333823] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.333823] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.333823] vgaarb: loaded
[    0.333823] vgaarb: bridge control possible 0000:01:00.0
[    0.333823] SCSI subsystem initialized
[    0.333823] libata version 3.00 loaded.
[    0.333823] ACPI: bus type USB registered
[    0.333823] usbcore: registered new interface driver usbfs
[    0.333823] usbcore: registered new interface driver hub
[    0.333823] usbcore: registered new device driver usb
[    0.333823] PCI: Using ACPI for IRQ routing
[    0.336128] PCI: pci_cache_line_size set to 64 bytes
[    0.336234] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.336236] e820: reserve RAM buffer [mem 0xbfca8000-0xbfffffff]
[    0.336238] e820: reserve RAM buffer [mem 0xbfd81000-0xbfffffff]
[    0.336240] e820: reserve RAM buffer [mem 0xbfddf000-0xbfffffff]
[    0.336241] e820: reserve RAM buffer [mem 0xbfe00000-0xbfffffff]
[    0.336336] NetLabel: Initializing
[    0.336337] NetLabel:  domain hash size = 128
[    0.336338] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.336357] NetLabel:  unlabeled traffic allowed by default
[    0.336369] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.336369] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.336369] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.338079] Switched to clocksource hpet
[    0.343083] AppArmor: AppArmor Filesystem Enabled
[    0.343126] pnp: PnP ACPI init
[    0.343143] ACPI: bus type PNP registered
[    0.343252] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.343257] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.343797] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.343801] system 00:01: [io  0x0600-0x060f] has been reserved
[    0.343804] system 00:01: [io  0x0610] has been reserved
[    0.343806] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.343808] system 00:01: [io  0x0810-0x0817] has been reserved
[    0.343811] system 00:01: [io  0x0820-0x0823] has been reserved
[    0.343813] system 00:01: [io  0x0400-0x047f] could not be reserved
[    0.343816] system 00:01: [io  0x0500-0x053f] has been reserved
[    0.343818] system 00:01: [io  0x0380-0x038e] has been reserved
[    0.343821] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.343824] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.343826] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.343829] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.343831] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.343834] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.343836] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.343839] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.343841] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.343844] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.343847] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.343858] pnp 00:02: [dma 4]
[    0.343881] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.343925] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.344032] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.344066] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.344097] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[    0.344144] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.344189] pnp 00:08: Plug and Play ACPI device, IDs SYN1e04 SYN1e00 SYN0002 PNP0f13 (active)
[    0.344246] pnp 00:09: Plug and Play ACPI device, IDs ENE0100 (active)
[    0.344437] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active)
[    0.344498] pnp: PnP ACPI: found 11 devices
[    0.344500] ACPI: bus type PNP unregistered
[    0.351137] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    0.351141] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    0.351200] pci 0000:01:00.0: BAR 6: assigned [mem 0xda020000-0xda03ffff pref]
[    0.351203] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.351206] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
[    0.351210] pci 0000:00:01.0:   bridge window [mem 0xda000000-0xda0fffff]
[    0.351213] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.351218] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.351221] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
[    0.351226] pci 0000:00:1c.0:   bridge window [mem 0xd9000000-0xd9ffffff]
[    0.351230] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.351238] pci 0000:03:00.0: BAR 6: assigned [mem 0xd1020000-0xd102ffff pref]
[    0.351240] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.351243] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.351249] pci 0000:00:1c.1:   bridge window [mem 0xd8000000-0xd8ffffff]
[    0.351253] pci 0000:00:1c.1:   bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[    0.351260] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.351263] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.351268] pci 0000:00:1c.3:   bridge window [mem 0xd7000000-0xd7ffffff]
[    0.351273] pci 0000:00:1c.3:   bridge window [mem 0xd2000000-0xd2ffffff 64bit pref]
[    0.351280] pci 0000:00:1c.4: PCI bridge to [bus 06]
[    0.351283] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.351289] pci 0000:00:1c.4:   bridge window [mem 0xd6000000-0xd6ffffff]
[    0.351293] pci 0000:00:1c.4:   bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
[    0.351300] pci 0000:00:1c.5: PCI bridge to [bus 07-09]
[    0.351303] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.351308] pci 0000:00:1c.5:   bridge window [mem 0xd5000000-0xd5ffffff]
[    0.351312] pci 0000:00:1c.5:   bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
[    0.351319] pci 0000:00:1e.0: PCI bridge to [bus 0a]
[    0.351332] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.351334] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.351336] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.351338] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
[    0.351341] pci_bus 0000:01: resource 0 [io  0x7000-0x7fff]
[    0.351343] pci_bus 0000:01: resource 1 [mem 0xda000000-0xda0fffff]
[    0.351345] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.351348] pci_bus 0000:02: resource 0 [io  0x6000-0x6fff]
[    0.351350] pci_bus 0000:02: resource 1 [mem 0xd9000000-0xd9ffffff]
[    0.351352] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.351354] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    0.351356] pci_bus 0000:03: resource 1 [mem 0xd8000000-0xd8ffffff]
[    0.351359] pci_bus 0000:03: resource 2 [mem 0xd1000000-0xd1ffffff 64bit pref]
[    0.351361] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.351363] pci_bus 0000:05: resource 1 [mem 0xd7000000-0xd7ffffff]
[    0.351365] pci_bus 0000:05: resource 2 [mem 0xd2000000-0xd2ffffff 64bit pref]
[    0.351368] pci_bus 0000:06: resource 0 [io  0x3000-0x3fff]
[    0.351370] pci_bus 0000:06: resource 1 [mem 0xd6000000-0xd6ffffff]
[    0.351372] pci_bus 0000:06: resource 2 [mem 0xd3000000-0xd3ffffff 64bit pref]
[    0.351374] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.351376] pci_bus 0000:07: resource 1 [mem 0xd5000000-0xd5ffffff]
[    0.351379] pci_bus 0000:07: resource 2 [mem 0xd4000000-0xd4ffffff 64bit pref]
[    0.351381] pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7]
[    0.351383] pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff]
[    0.351385] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[    0.351387] pci_bus 0000:0a: resource 7 [mem 0xc0000000-0xfebfffff]
[    0.351424] NET: Registered protocol family 2
[    0.351642] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.351796] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.352031] TCP: Hash tables configured (established 32768 bind 32768)
[    0.352088] TCP: reno registered
[    0.352097] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.352133] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.352223] NET: Registered protocol family 1
[    0.354515] pci 0000:01:00.0: Video device with shadowed ROM
[    0.354547] PCI: CLS 64 bytes, default 64
[    0.354615] Trying to unpack rootfs image as initramfs...
[    0.716089] Freeing initrd memory: 18748K (ffff880035b52000 - ffff880036da1000)
[    0.716181] Simple Boot Flag at 0x44 set to 0x1
[    0.716325] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa0b
[    0.716332] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa0b
[    0.716411] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.716413] Scanning for low memory corruption every 60 seconds
[    0.716684] Initialise system trusted keyring
[    0.716738] audit: initializing netlink socket (disabled)
[    0.716756] type=2000 audit(1417541183.716:1): initialized
[    0.748686] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.749993] zbud: loaded
[    0.750130] VFS: Disk quotas dquot_6.5.2
[    0.750181] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.750670] fuse init (API version 7.22)
[    0.750752] msgmni has been set to 6009
[    0.750811] Key type big_key registered
[    0.751176] Key type asymmetric registered
[    0.751178] Asymmetric key parser 'x509' registered
[    0.751211] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.751243] io scheduler noop registered
[    0.751246] io scheduler deadline registered (default)
[    0.751271] io scheduler cfq registered
[    0.751553] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.751754] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.751972] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.752209] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    0.752425] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[    0.752639] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
[    0.752738] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.752741] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.752743] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[    0.752747] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.752768] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.752770] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.752775] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.752794] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.752796] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.752801] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.752822] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.752827] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.752846] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.752849] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[    0.752850] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[    0.752852] pci 0000:06:00.2: Signaling PME through PCIe PME interrupt
[    0.752854] pci 0000:06:00.3: Signaling PME through PCIe PME interrupt
[    0.752856] pci 0000:06:00.4: Signaling PME through PCIe PME interrupt
[    0.752861] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.752881] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    0.752886] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    0.752901] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.752918] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.752962] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.752963] vesafb: scrolling: redraw
[    0.752965] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.753293] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90004780000, using 3072k, total 3072k
[    0.789088] Console: switching to colour frame buffer device 128x48
[    0.824808] fb0: VESA VGA frame buffer device
[    0.824834] intel_idle: does not run on family 6 model 23
[    0.824841] ipmi message handler version 39.2
[    0.825122] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.825465] ACPI: AC Adapter [ACAD] (on-line)
[    0.825569] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.825574] ACPI: Power Button [PWRB]
[    0.825612] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.825970] ACPI: Lid Switch [LID0]
[    0.826007] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.826011] ACPI: Sleep Button [SLPB]
[    0.826059] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.826062] ACPI: Power Button [PWRF]
[    0.826237] Monitor-Mwait will be used to enter C-1 state
[    0.826241] Monitor-Mwait will be used to enter C-2 state
[    0.826245] Monitor-Mwait will be used to enter C-3 state
[    0.826248] tsc: Marking TSC unstable due to TSC halts in idle
[    0.826257] ACPI: acpi_idle registered with cpuidle
[    0.826844] [Firmware Bug]: Invalid critical threshold (0)
[    0.828211] thermal LNXTHERM:00: registered as thermal_zone0
[    0.828213] ACPI: Thermal Zone [TZ01] (47 C)
[    0.828240] GHES: HEST is not enabled!
[    0.828344] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.828525] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.828533] ACPI: Battery Slot [BAT0] (battery absent)
[    0.830086] Linux agpgart interface v0.103
[    0.831721] brd: module loaded
[    0.832533] loop: module loaded
[    0.832927] libphy: Fixed MDIO Bus: probed
[    0.833024] tun: Universal TUN/TAP device driver, 1.6
[    0.833025] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.833065] PPP generic driver version 2.4.2
[    0.833117] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.833121] ehci-pci: EHCI PCI platform driver
[    0.833299] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.833306] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.833321] ehci-pci 0000:00:1a.7: debug port 1
[    0.837230] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    0.837246] ehci-pci 0000:00:1a.7: irq 19, io mem 0xda105c00
[    0.848037] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.848104] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.848107] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.848109] usb usb1: Product: EHCI Host Controller
[    0.848111] usb usb1: Manufacturer: Linux 3.13.0-41-generic ehci_hcd
[    0.848113] usb usb1: SerialNumber: 0000:00:1a.7
[    0.848228] hub 1-0:1.0: USB hub found
[    0.848236] hub 1-0:1.0: 4 ports detected
[    0.848535] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.848541] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.848556] ehci-pci 0000:00:1d.7: debug port 1
[    0.852459] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.852476] ehci-pci 0000:00:1d.7: irq 20, io mem 0xda105800
[    0.864091] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.864138] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.864141] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.864150] usb usb2: Product: EHCI Host Controller
[    0.864152] usb usb2: Manufacturer: Linux 3.13.0-41-generic ehci_hcd
[    0.864154] usb usb2: SerialNumber: 0000:00:1d.7
[    0.864267] hub 2-0:1.0: USB hub found
[    0.864274] hub 2-0:1.0: 8 ports detected
[    0.864565] ehci-platform: EHCI generic platform driver
[    0.864574] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.864575] ohci-pci: OHCI PCI platform driver
[    0.864586] ohci-platform: OHCI generic platform driver
[    0.864593] uhci_hcd: USB Universal Host Controller Interface driver
[    0.864741] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.864747] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.864781] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000080e0
[    0.864827] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.864829] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.864831] usb usb3: Product: UHCI Host Controller
[    0.864834] usb usb3: Manufacturer: Linux 3.13.0-41-generic uhci_hcd
[    0.864836] usb usb3: SerialNumber: 0000:00:1a.0
[    0.864939] hub 3-0:1.0: USB hub found
[    0.864948] hub 3-0:1.0: 2 ports detected
[    0.865159] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.865165] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.865198] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000080c0
[    0.865242] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.865245] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.865247] usb usb4: Product: UHCI Host Controller
[    0.865249] usb usb4: Manufacturer: Linux 3.13.0-41-generic uhci_hcd
[    0.865251] usb usb4: SerialNumber: 0000:00:1a.1
[    0.865356] hub 4-0:1.0: USB hub found
[    0.865363] hub 4-0:1.0: 2 ports detected
[    0.865575] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.865580] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.865604] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000080a0
[    0.865647] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.865649] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.865652] usb usb5: Product: UHCI Host Controller
[    0.865654] usb usb5: Manufacturer: Linux 3.13.0-41-generic uhci_hcd
[    0.865656] usb usb5: SerialNumber: 0000:00:1d.0
[    0.865758] hub 5-0:1.0: USB hub found
[    0.865765] hub 5-0:1.0: 2 ports detected
[    0.865978] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.865983] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.866007] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008080
[    0.866051] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.866054] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.866056] usb usb6: Product: UHCI Host Controller
[    0.866058] usb usb6: Manufacturer: Linux 3.13.0-41-generic uhci_hcd
[    0.866060] usb usb6: SerialNumber: 0000:00:1d.1
[    0.866167] hub 6-0:1.0: USB hub found
[    0.866174] hub 6-0:1.0: 2 ports detected
[    0.866402] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.866408] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.866431] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00008060
[    0.866474] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.866477] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.866480] usb usb7: Product: UHCI Host Controller
[    0.866482] usb usb7: Manufacturer: Linux 3.13.0-41-generic uhci_hcd
[    0.866484] usb usb7: SerialNumber: 0000:00:1d.2
[    0.866590] hub 7-0:1.0: USB hub found
[    0.866597] hub 7-0:1.0: 2 ports detected
[    0.866823] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.866829] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    0.866861] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00008040
[    0.866906] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.866909] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.866911] usb usb8: Product: UHCI Host Controller
[    0.866913] usb usb8: Manufacturer: Linux 3.13.0-41-generic uhci_hcd
[    0.866915] usb usb8: SerialNumber: 0000:00:1d.3
[    0.867012] hub 8-0:1.0: USB hub found
[    0.867019] hub 8-0:1.0: 2 ports detected
[    0.867155] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    0.891726] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.891732] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.891861] mousedev: PS/2 mouse device common for all mice
[    0.892913] rtc_cmos 00:03: RTC can wake from S4
[    0.893037] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.893063] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.893134] device-mapper: uevent: version 1.0.3
[    0.893213] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.893220] ledtrig-cpu: registered to indicate activity on CPUs
[    0.893329] TCP: cubic registered
[    0.893332] IPv6: Loaded, but administratively disabled, reboot required to enable
[    0.893335] NET: Registered protocol family 17
[    0.893350] Key type dns_resolver registered
[    0.893620] Loading compiled-in X.509 certificates
[    0.894772] Loaded X.509 cert 'Magrathea: Glacier signing key: b804a224c507bf339f382f8173aa07c20d99d06b'
[    0.894786] registered taskstats version 1
[    0.897094] Key type trusted registered
[    0.898900] Key type encrypted registered
[    0.900688] AppArmor: AppArmor sha1 policy hashing enabled
[    0.900692] IMA: No TPM chip found, activating TPM-bypass!
[    0.901233] regulator-dummy: disabling
[    0.901280]   Magic number: 10:364:440
[    0.901318] clockevents broadcast: hash matches
[    0.901341] pcieport 0000:00:1c.1: hash matches
[    0.901408] rtc_cmos 00:03: setting system clock to 2014-12-02 17:26:24 UTC (1417541184)
[    0.901714] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.901716] EDD information not available.
[    0.901760] PM: Hibernation image not present or could not be loaded.
[    0.903421] Freeing unused kernel memory: 1340K (ffffffff81d20000 - ffffffff81e6f000)
[    0.903423] Write protecting the kernel read-only data: 12288k
[    0.905948] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
[    0.908036] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
[    0.913786] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.921679] systemd-udevd[102]: starting version 204
[    0.961571] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.961840] r8169 0000:03:00.0: irq 46 for MSI/MSI-X
[    0.961961] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc90000652000, 00:26:9e:22:f0:ab, XID 1c4000c0 IRQ 46
[    0.961963] r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    0.966499] sdhci: Secure Digital Host Controller Interface driver
[    0.966502] sdhci: Copyright(c) Pierre Ossman
[    0.975061] ahci 0000:00:1f.2: version 3.0
[    0.975266] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[    0.975311] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.975340] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    0.975343] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[    0.996634] scsi0 : ahci
[    0.996717] scsi1 : ahci
[    0.996778] scsi2 : ahci
[    0.996840] scsi3 : ahci
[    0.996898] scsi4 : ahci
[    0.996961] scsi5 : ahci
[    0.997001] ata1: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105100 irq 47
[    0.997004] ata2: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105180 irq 47
[    0.997006] ata3: DUMMY
[    0.997008] ata4: DUMMY
[    0.997010] ata5: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105300 irq 47
[    0.997013] ata6: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105380 irq 47
[    1.032071] firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 0 IT contexts, quirks 0x10
[    1.032149] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
[    1.032323] sdhci-pci 0000:06:00.1: dummy supplies not allowed
[    1.032325] mmc0: no vqmmc regulator found
[    1.032327] sdhci-pci 0000:06:00.1: dummy supplies not allowed
[    1.032328] mmc0: no vmmc regulator found
[    1.032407] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
[    1.032422] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[    1.032487] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[    1.436059] usb 2-4: new high-speed USB device number 3 using ehci-pci
[    1.488021] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.498038] ata1.00: ATA-8: ST9320325AS, 0005HPM1, max UDMA/100
[    1.498041] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.520896] ata1.00: configured for UDMA/100
[    1.521079] scsi 0:0:0:0: Direct-Access     ATA      ST9320325AS      0005 PQ: 0 ANSI: 5
[    1.521244] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.521274] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.521407] sd 0:0:0:0: [sda] Write Protect is off
[    1.521411] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.521461] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.532122] firewire_core 0000:06:00.0: created device fw0: GUID 00241b00ddca8d01, S400
[    1.602831] usb 2-4: New USB device found, idVendor=0408, idProduct=03f1
[    1.602836] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.602839] usb 2-4: Product: HP Webcam
[    1.602842] usb 2-4: Manufacturer: SN001
[    1.618151]  sda: sda2 sda3 sda4 < sda5 >
[    1.618554] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.012041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.024803] ata2.00: ATAPI: Optiarc DVD RW AD-7561S, AH03, max UDMA/100
[    2.038465] ata2.00: configured for UDMA/100
[    2.042079] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7561S  AH03 PQ: 0 ANSI: 5
[    2.045879] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.045881] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.045965] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.046016] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.075501] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0, board id: 3655, fw id: 428212
[    2.104061] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[    2.162286] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    2.263064] usb 6-1: New USB device found, idVendor=138a, idProduct=0001
[    2.263068] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.364038] ata5: SATA link down (SStatus 0 SControl 300)
[    2.504060] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[    2.680489] usb 7-2: New USB device found, idVendor=03f0, idProduct=171d
[    2.680494] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.680497] usb 7-2: Product: HP Integrated Module
[    2.680500] usb 7-2: Manufacturer: Broadcom Corp
[    2.684049] ata6: SATA link down (SStatus 0 SControl 300)
[    3.897570] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.380253] random: nonblocking pool is initialized
[    8.974175] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    9.371852] systemd-udevd[310]: starting version 204
[   10.808310] lp: driver loaded but no devices found
[   10.943007] ppdev: user-space parallel port driver
[   12.972426] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   12.972936] ACPI Error: [_T_2] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dswload2-330)
[   12.972942] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20131115/psobject-222)
[   12.972945] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD_.GBQC] (Node ffff8800bae71758), AE_ALREADY_EXISTS (20131115/psparse-536)
[   12.972952] ACPI: Marking method GBQC as Serialized because of AE_ALREADY_EXISTS error
[   12.972955] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD_._BQC] (Node ffff8800bae71730), AE_ALREADY_EXISTS (20131115/psparse-536)
[   12.972960] ACPI: Marking method _BQC as Serialized because of AE_ALREADY_EXISTS error
[   12.972964] ACPI Warning: Evaluating _BQC failed (20131115/video-681)
[   12.974441] acpi device:08: registered as cooling_device2
[   12.974853] ACPI Error: [_T_2] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dswload2-330)
[   12.974859] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20131115/psobject-222)
[   12.974862] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD1.GBQC] (Node ffff8800bae719d8), AE_ALREADY_EXISTS (20131115/psparse-536)
[   12.974868] ACPI: Marking method GBQC as Serialized because of AE_ALREADY_EXISTS error
[   12.974871] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD1._BQC] (Node ffff8800bae719b0), AE_ALREADY_EXISTS (20131115/psparse-536)
[   12.974876] ACPI: Marking method _BQC as Serialized because of AE_ALREADY_EXISTS error
[   12.974879] ACPI Warning: Evaluating _BQC failed (20131115/video-681)
[   12.976328] acpi device:0a: registered as cooling_device3
[   12.976419] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input7
[   12.978912] wmi: Mapper loaded
[   13.070907] hp_accel: laptop model unknown, using default axes configuration
[   13.084487] lis3lv02d: 8 bits sensor found
[   13.126573] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xd2
[   13.126577] ene_ir: PLL freq = 1406
[   13.126578] ene_ir: KB3926D or higher detected
[   13.126591] ene_ir: Firmware regs: c0 00
[   13.126592] ene_ir: Hardware features:
[   13.126594] ene_ir: * Uses GPIO 40 for IR demodulated input
[   13.164038] Registered IR keymap rc-rc6-mce
[   13.164144] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input8
[   13.164274] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[   13.172794] ene_ir: driver has been successfully loaded
[   13.180488] lirc_dev: IR Remote Control driver registered, major 250
[   13.184974] IR NEC protocol handler initialized
[   13.186958] IR SANYO protocol handler initialized
[   13.238236] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[   13.238239] IR LIRC bridge handler initialized
[   13.242624] IR RC6 protocol handler initialized
[   13.243275] IR JVC protocol handler initialized
[   13.244681] IR Sony protocol handler initialized
[   13.253769] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input9
[   13.253843] IR MCE Keyboard/mouse protocol handler initialized
[   13.283855] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMBA 1 (20131115/utaddress-251)
[   13.283862] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.283866] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   13.283870] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.283896] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   13.298229] IR RC5(x) protocol handler initialized
[   13.300104] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input10
[   13.981976] [drm] Initialized drm 1.1.0 20060810
[   14.074573] cfg80211: Calling CRDA to update world regulatory domain
[   14.436310] WARNING! power/level is deprecated; use power/control instead
[   14.624143] Intel(R) Wireless WiFi driver for Linux, in-tree:
[   14.624146] Copyright(c) 2003-2013 Intel Corporation
[   14.624363] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X
[   14.695026] Bluetooth: Core ver 2.17
[   14.695216] NET: Registered protocol family 31
[   14.695219] Bluetooth: HCI device and connection manager initialized
[   14.695231] Bluetooth: HCI socket layer initialized
[   14.695234] Bluetooth: L2CAP socket layer initialized
[   14.695238] Bluetooth: SCO socket layer initialized
[   14.699967] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[   14.727873] usbcore: registered new interface driver btusb
[   14.759183] mute LED gpio 8 polarity 1
[   14.759391] autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0) type:line
[   14.759393]    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[   14.759395]    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.759396]    mono: mono_out=0x0
[   14.759398]    dig-out=0x1e/0x0
[   14.759399]    inputs:
[   14.759400]      Internal Mic=0x18
[   14.759402]      Mic=0xb
[   14.784280] input: HDA Intel Front Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   14.784365] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   14.784665] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   14.784667] hda-intel 0000:01:00.1: Using LPIB position fix
[   14.784718] snd_hda_intel 0000:01:00.1: irq 50 for MSI/MSI-X
[   14.787045] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[   14.796227] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   14.820447] [drm] radeon kernel modesetting enabled.
[   14.820524] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[   14.820526] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[   14.820549] Console: switching to colour dummy device 80x25
[   14.820865] [drm] initializing kernel modesetting (RV730 0x1002:0x9480 0x103C:0x3628).
[   14.820886] [drm] register mmio base: 0xDA000000
[   14.820887] [drm] register mmio size: 65536
[   14.821098] ATOM BIOS: HP_Quanta_Jones_Cujo_M96M_DDR3
[   14.821135] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   14.821138] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[   14.821140] [drm] Detected VRAM RAM=1024M, BAR=256M
[   14.821142] [drm] RAM width 128bits DDR
[   14.821915] [TTM] Zone  kernel: Available graphics memory: 1539720 kiB
[   14.821918] [TTM] Initializing pool allocator
[   14.821922] [TTM] Initializing DMA pool allocator
[   14.821940] [drm] radeon: 1024M of VRAM memory ready
[   14.821941] [drm] radeon: 1024M of GTT memory ready.
[   14.821953] [drm] Loading RV730 Microcode
[   14.954498] input: HP WMI hotkeys as /devices/virtual/input/input14
[   15.003841] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   15.009491] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
[   15.016901] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[   15.016951] radeon 0000:01:00.0: WB enabled
[   15.016955] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800b762cc00
[   15.016957] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800b762cc0c
[   15.017762] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc9000479c598
[   15.017766] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   15.017767] [drm] Driver supports precise vblank timestamp query.
[   15.017797] radeon 0000:01:00.0: irq 51 for MSI/MSI-X
[   15.017814] radeon 0000:01:00.0: radeon: using MSI.
[   15.017847] [drm] radeon: irq initialized.
[   15.063870] [drm] ring test on 0 succeeded in 1 usecs
[   15.063879] [drm] ring test on 3 succeeded in 3 usecs
[   15.255482] [drm] ring test on 5 succeeded in 1 usecs
[   15.255489] [drm] UVD initialized successfully.
[   15.255617] [drm] Enabling audio 0 support
[   15.255643] [drm] ib test on ring 0 succeeded in 0 usecs
[   15.255677] HDMI ATI/AMD: no speaker allocation for ELD
[   15.255699] [drm] ib test on ring 3 succeeded in 0 usecs
[   15.405067] [drm] ib test on ring 5 succeeded
[   15.405867] [drm] radeon atom DIG backlight initialized
[   15.405870] [drm] Radeon Display Connectors
[   15.405871] [drm] Connector 0:
[   15.405873] [drm]   LVDS-1
[   15.405875] [drm]   DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
[   15.405876] [drm]   Encoders:
[   15.405878] [drm]     LCD1: INTERNAL_UNIPHY2
[   15.405879] [drm] Connector 1:
[   15.405880] [drm]   VGA-1
[   15.405882] [drm]   DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac
[   15.405883] [drm]   Encoders:
[   15.405884] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   15.405886] [drm] Connector 2:
[   15.405887] [drm]   HDMI-A-1
[   15.405888] [drm]   HPD1
[   15.405890] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   15.405891] [drm]   Encoders:
[   15.405893] [drm]     DFP1: INTERNAL_UNIPHY
[   15.410583] [drm] radeon: dpm initialized
[   15.426433] Linux video capture interface: v2.00
[   15.527749] gpio_ich: GPIO from 195 to 255 on gpio_ich
[   15.552080] HDMI ATI/AMD: no speaker allocation for ELD
[   15.844424] uvcvideo: Found UVC 1.00 device HP Webcam (0408:03f1)
[   15.852088] HDMI ATI/AMD: no speaker allocation for ELD
[   15.877595] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.904315] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   15.904320] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   15.904322] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   15.904325] iwlwifi 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[   15.904378] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   15.934295] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   15.960229] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input15
[   15.960393] usbcore: registered new interface driver uvcvideo
[   15.960396] USB Video Class driver (1.1.1)
[   16.132529] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   16.152084] HDMI ATI/AMD: no speaker allocation for ELD
[   16.257233] type=1400 audit(1417533999.853:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=450 comm="apparmor_parser"
[   16.257241] type=1400 audit(1417533999.853:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=450 comm="apparmor_parser"
[   16.257246] type=1400 audit(1417533999.853:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=450 comm="apparmor_parser"
[   16.257256] type=1400 audit(1417533999.853:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=435 comm="apparmor_parser"
[   16.257263] type=1400 audit(1417533999.853:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=435 comm="apparmor_parser"
[   16.257268] type=1400 audit(1417533999.853:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=435 comm="apparmor_parser"
[   16.257709] type=1400 audit(1417533999.853:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=450 comm="apparmor_parser"
[   16.257715] type=1400 audit(1417533999.853:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=450 comm="apparmor_parser"
[   16.257729] type=1400 audit(1417533999.853:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=435 comm="apparmor_parser"
[   16.257734] type=1400 audit(1417533999.853:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=435 comm="apparmor_parser"
[   16.283790] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   16.395633] [drm] fb mappable at 0xC045E000
[   16.395637] [drm] vram apper at 0xC0000000
[   16.395638] [drm] size 4325376
[   16.395639] [drm] fb depth is 24
[   16.395641] [drm]    pitch is 5632
[   16.395723] fbcon: radeondrmfb (fb0) is primary device
[   16.448797] Console: switching to colour frame buffer device 170x48
[   16.451745] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   16.451747] radeon 0000:01:00.0: registered panic notifier
[   16.451759] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[   16.452204] HDMI ATI/AMD: no speaker allocation for ELD
[   16.689896] cfg80211: World regulatory domain updated:
[   16.689901] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   16.689903] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.689905] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.689907] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.689909] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.689911] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.752088] HDMI ATI/AMD: no speaker allocation for ELD
[   17.052084] HDMI ATI/AMD: no speaker allocation for ELD
[   17.352085] HDMI ATI/AMD: no speaker allocation for ELD
[   17.652084] HDMI ATI/AMD: no speaker allocation for ELD
[   18.185704] init: failsafe main process (555) killed by TERM signal
[   19.384312] init: cups main process (710) killed by HUP signal
[   19.384326] init: cups main process ended, respawning
[   21.363146] Bluetooth: RFCOMM TTY layer initialized
[   21.363159] Bluetooth: RFCOMM socket layer initialized
[   21.363165] Bluetooth: RFCOMM ver 1.11
[   21.385434] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.385438] Bluetooth: BNEP filters: protocol multicast
[   21.385469] Bluetooth: BNEP socket layer initialized
[   25.888319] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   25.891228] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   25.990965] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   25.993900] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   26.037332] r8169 0000:03:00.0 eth0: link down
[   29.184436] audit_printk_skb: 15 callbacks suppressed
[   29.184439] type=1400 audit(1417534012.781:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=890 comm="apparmor_parser"
[   29.184448] type=1400 audit(1417534012.781:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=890 comm="apparmor_parser"
[   29.184453] type=1400 audit(1417534012.781:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=890 comm="apparmor_parser"
[   29.184914] type=1400 audit(1417534012.781:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=890 comm="apparmor_parser"
[   29.184919] type=1400 audit(1417534012.781:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=890 comm="apparmor_parser"
[   29.185157] type=1400 audit(1417534012.781:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=890 comm="apparmor_parser"
[   29.309720] type=1400 audit(1417534012.905:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=891 comm="apparmor_parser"
[   29.700153] type=1400 audit(1417534013.297:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=889 comm="apparmor_parser"
[   29.700163] type=1400 audit(1417534013.297:25): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=889 comm="apparmor_parser"
[   29.700445] type=1400 audit(1417534013.297:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=889 comm="apparmor_parser"
[   30.096331] init: samba-ad-dc main process (821) terminated with status 1
[   33.068506] wlan0: authenticate with a4:99:47:59:02:1c
[   33.070349] wlan0: send auth to a4:99:47:59:02:1c (try 1/3)
[   33.072872] wlan0: authenticated
[   33.080031] wlan0: associate with a4:99:47:59:02:1c (try 1/3)
[   33.084054] wlan0: RX AssocResp from a4:99:47:59:02:1c (capab=0x431 status=0 aid=1)
[   33.092733] wlan0: associated
[   33.092796] cfg80211: Calling CRDA for country: TR
[   33.095506] cfg80211: Regulatory domain changed to country: TR
[   33.095510] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   33.095512] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   33.095514] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   33.095516] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   33.095518] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[   33.426390] wlan0: deauthenticating from a4:99:47:59:02:1c by local choice (reason=2)
[   33.430769] wlan0: authenticate with a4:99:47:59:02:1c
[   33.437236] wlan0: send auth to a4:99:47:59:02:1c (try 1/3)
[   33.437650] cfg80211: Calling CRDA to update world regulatory domain
[   33.440889] cfg80211: World regulatory domain updated:
[   33.440893] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   33.440895] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   33.440897] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   33.440899] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   33.440901] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   33.440903] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   33.442884] wlan0: authenticated
[   33.444049] wlan0: associate with a4:99:47:59:02:1c (try 1/3)
[   33.448052] wlan0: RX AssocResp from a4:99:47:59:02:1c (capab=0x431 status=0 aid=1)
[   33.455552] wlan0: associated
[   33.455595] cfg80211: Calling CRDA for country: TR
[   33.458178] cfg80211: Regulatory domain changed to country: TR
[   33.458181] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   33.458184] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   33.458185] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   33.458187] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   33.458189] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[   34.108941] Ebtables v2.0 registered
[   34.278291] Bridge firewalling registered
[   49.985792] audit_printk_skb: 135 callbacks suppressed
[   49.985796] type=1400 audit(1417534033.579:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1952 comm="apparmor_parser"
[   49.985804] type=1400 audit(1417534033.579:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1952 comm="apparmor_parser"
[   49.986269] type=1400 audit(1417534033.579:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1952 comm="apparmor_parser"
[  357.443475] systemd-hostnamed[3074]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!

[heartsmagic]

Evet, o konuyu başka bir konuda konuşalım. Ve yine evet hissetmek var, hissetmek var Sorun neyse bize tam olarak ve ayrıntılarıyla aktarman lazım. Öteki türlü genel anlamdaki sorunları araştırmak da çözmek de zor oluyor.

Bu konuyu kapatalım mı? Ben başlığı düzenledim sen bir etiket basarsın, sonra da kapatırız.

[libertaria]

Tamam hocam bu konuyu kapatabiliriz.Sizlerinde değerli vaktini aldım kusura bakmayın.Aslında bakıyorum da ben ne kadar bir şeyleri düzeltmeye çalışsam da başka yerden farklı sorunlarla karşılaşıyorum ubuntu'ya (lunıx'e) düşe kalka alışacağız. Format atmayı düşünmüyor değilim aslında  çünkü açılış olması gerekenden yavaş açılış da kısa süreli donmalar yaşıyorum.

[heartsmagic]

Etiket işini de ben yapayım bu seferlik
http://kb.ubuntu-tr.net/cozulen-basliklarin-etiketlenmesi

Linux bu kadar sorunlu değildir aslında, işler yoluna girer ve donanımsal bir sorunun yoksa uzun süreler mutlu mesut kullanırsın