Atheros AR5211 Wifi Alıcı Sürücü Sorunu

[mustineo]

Merhaba arkadaşlar,
Atheros AR5211 çipsetli pci wifi lan ağ kartım sistemde görünmemektedir.
lspci çıktısı:

Kod Seç Genişlet

01:07.0 Ethernet controller: Qualcomm Atheros AR5211 Wireless Network Adapter [AR5001A 802.11a] (rev 01)


[heartsmagic]

Tüm çıktıları bir görseydik?
agkomut

Ayrıca, Linux dağıtımı ve sürümü nedir?

[mustineo]

Linux Mint 13 Maya kullanıyorum.

Kod Seç Genişlet

~ $ cat /etc/lsb-release
DISTRIB_ID=LinuxMint
DISTRIB_RELEASE=13
DISTRIB_CODENAME=maya
DISTRIB_DESCRIPTION="Linux Mint 13 Maya"


Kod Seç Genişlet

~ $ uname -a
Linux pc 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux


Kod Seç Genişlet

lspci
00:00.0 RAM memory: NVIDIA Corporation MCP61 Host Bridge (rev a1)
00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3)
00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3)
00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:07.0 Ethernet controller: Qualcomm Atheros AR5212/AR5213 Wireless Network Adapter (rev 01)
02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9500 GT] (rev a1)


Kod Seç Genişlet

~ $ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 046d:0802 Logitech, Inc. Webcam C200
Bus 001 Device 004: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
Bus 002 Device 002: ID 046d:c52e Logitech, Inc.


Kod Seç Genişlet

~ $ rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no


Kod Seç Genişlet

~ $ sudo lshw -C network
[sudo] password for historian:
  *-network UNCLAIMED     
       açıklama: Ethernet controller
       ürün: AR5212/AR5213 Wireless Network Adapter
       üretici: Qualcomm Atheros
       physical id: 7
       bus info: pci@0000:01:07.0
       sürüm: 01
       genişlik: 32 bits
       saat: 33MHz
       kapasiteler: pm cap_list
       yapılandırma: latency=168 maxlatency=28 mingnt=10
       kaynaklar: bellek:dbf00000-dbf0ffff
  *-network
       açıklama: Kablosuz arayüz
       physical id: 1
       bus info: usb@1:4
       mantıksal ad: wlan0
       serial: 00:e0:4c:82:bc:88
       kapasiteler: eternet physical wireless
       yapılandırma: broadcast=yes driver=rtl8187 driverversion=3.2.0-23-generic firmware=N/A ip=192.168.1.37 link=yes multicast=yes wireless=IEEE 802.11bg


Kod Seç Genişlet

~ $ ifconfig
eth0      Link encap:Ethernet  HWaddr e0:cb:4e:cb:eb:01 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:43 Base address:0xa000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:358 errors:0 dropped:0 overruns:0 frame:0
          TX packets:358 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:44209 (44.2 KB)  TX bytes:44209 (44.2 KB)

wlan0     Link encap:Ethernet  HWaddr 00:e0:4c:82:bc:88 
          inet addr:192.168.1.37  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::2e0:4cff:fe82:bc88/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:9074 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8292 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:8964210 (8.9 MB)  TX bytes:1535634 (1.5 MB)


Kod Seç Genişlet

~ $ iwconfig
lo        no wireless extensions.

wlan0     IEEE 802.11bg  ESSID:"ZyXEL" 
          Mode:Managed  Frequency:2.437 GHz  Access Point: 50:67:F0:9A:97:B6   
          Bit Rate=12 Mb/s   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=51/70  Signal level=-59 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:1401  Invalid misc:126   Missed beacon:0

eth0      no wireless extensions.



Kod Seç Genişlet

~ $ iwlist scanning
lo        Interface doesn't support scanning.

wlan0     Scan completed :
          Cell 01 - Address: 50:67:F0:9A:97:B6
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=51/70  Signal level=-59 dBm 
                    Encryption key:on
                    ESSID:"ZyXEL"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
                              11 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000000d26995d8c
                    Extra: Last beacon: 9872ms ago
                    IE: Unknown: 00055A7958454C
                    IE: Unknown: 010882848B0C12961824
                    IE: Unknown: 030106
                    IE: Unknown: 2A0100
                    IE: Unknown: 32043048606C
                    IE: Unknown: 200100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 0706545220010D14
                    IE: Unknown: DD940050F204104A0001101044000102103B00010310470010555555550000C0A801015067F09A97B6102100055A7958454C1023000F5A7958454C2057464144657669636510240011502D363630572D54312076335F495076361042000830303030303030311054000800060050F20400011011001A5A7958454C20502D363630572D54312076335F4950763620415010080002008C

eth0      Interface doesn't support scanning.


Kod Seç Genişlet

~ $ lsmod
Module                  Size  Used by
snd_hda_codec_via      51398  1
rfcomm                 47604  0
bnep                   18281  2
bluetooth             180104  10 rfcomm,bnep
snd_usb_audio         122982  1
snd_hda_intel          33773  3
snd_hda_codec         127706  2 snd_hda_codec_via,snd_hda_intel
binfmt_misc            17540  1
snd_pcm                97188  3 snd_usb_audio,snd_hda_intel,snd_hda_codec
snd_hwdep              13668  2 snd_usb_audio,snd_hda_codec
snd_usbmidi_lib        25395  1 snd_usb_audio
snd_seq_midi           13324  0
snd_rawmidi            30748  2 snd_usbmidi_lib,snd_seq_midi
snd_seq_midi_event     14899  1 snd_seq_midi
snd_seq                61896  2 snd_seq_midi,snd_seq_midi_event
snd_timer              29990  2 snd_pcm,snd_seq
snd_seq_device         14540  3 snd_seq_midi,snd_rawmidi,snd_seq
ath5k                 156407  0
psmouse                87603  0
arc4                   12529  2
snd                    78855  19 snd_hda_codec_via,snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_pcm,snd_hwdep,snd_usbmidi_lib,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
i2c_nforce2            13058  0
joydev                 17693  0
ath                    24067  1 ath5k
soundcore              15091  1 snd
k10temp                13166  0
uvcvideo               72627  0
edac_core              53746  0
videodev               98259  1 uvcvideo
edac_mce_amd           23709  0
ppdev                  17113  0
v4l2_compat_ioctl32    17128  1 videodev
nouveau               774571  3
mac_hid                13253  0
ttm                    76949  1 nouveau
serio_raw              13211  0
drm_kms_helper         46978  1 nouveau
drm                   242038  5 nouveau,ttm,drm_kms_helper
i2c_algo_bit           13423  1 nouveau
mxm_wmi                12979  1 nouveau
wmi                    19256  1 mxm_wmi
video                  19596  1 nouveau
asus_atk0110           18078  0
rtl8187                57035  0
mac80211              506816  2 ath5k,rtl8187
cfg80211              205544  4 ath5k,ath,rtl8187,mac80211
eeprom_93cx6           12725  1 rtl8187
parport_pc             32866  1
lp                     17799  0
parport                46562  3 ppdev,parport_pc,lp
usbhid                 47199  0
hid                    99559  1 usbhid
forcedeth              63460  0
pata_amd               14118  0
sata_nv                32286  2


Kod Seç Genişlet

~ $ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-23-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=b897d510-aa41-47d4-87e2-5b537d4e6845 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
[    0.000000]  BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bffa0000 (usable)
[    0.000000]  BIOS-e820: 00000000bffa0000 - 00000000bffb8000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bffb8000 - 00000000bffe0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bffe0000 - 00000000bffee000 (reserved)
[    0.000000]  BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: System manufacturer System Product Name/M4N68T-M, BIOS 1301    07/05/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000140000000 aka 5120M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbffa0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-00000000bffa0000
[    0.000000]  0000000000 - 0080000000 page 1G
[    0.000000]  0080000000 - 00bfe00000 page 2M
[    0.000000]  00bfe00000 - 00bffa0000 page 4k
[    0.000000] kernel direct mapping tables up to bffa0000 @ 1fffd000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[    0.000000]  0100000000 - 0140000000 page 1G
[    0.000000] kernel direct mapping tables up to 140000000 @ bff9f000-bffa0000
[    0.000000] RAMDISK: 364de000 - 37267000
[    0.000000] ACPI: RSDP 00000000000fb6d0 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 00000000bffa0100 0005C (v01 070511 XSDT1819 20110705 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000bffa0290 000F4 (v03 070511 FACP1819 20110705 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000bffa0460 07A0A (v01  A1533 A1533000 00000000 INTL 20060113)
[    0.000000] ACPI: FACS 00000000bffb8000 00040
[    0.000000] ACPI: APIC 00000000bffa0390 00090 (v01 070511 APIC1819 20110705 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000bffa0420 0003C (v01 070511 OEMMCFG  20110705 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000bffb8040 00071 (v01 070511 OEMB1819 20110705 MSFT 00000097)
[    0.000000] ACPI: SRAT 00000000bffa7e70 000C8 (v01 AMD    FAM_F_10 00000002 AMD  00000001)
[    0.000000] ACPI: HPET 00000000bffa7f40 00038 (v01 070511 OEMHPET0 20110705 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000bffa7f80 00458 (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 0-a0000
[    0.000000] SRAT: Node 0 PXM 0 100000-c0000000
[    0.000000] SRAT: Node 0 PXM 0 100000000-140000000
[    0.000000] NUMA: Node 0 [0,a0000) + [100000,c0000000) -> [0,c0000000)
[    0.000000] NUMA: Node 0 [0,c0000000) + [100000000,140000000) -> [0,140000000)
[    0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[    0.000000]   NODE_DATA [000000013fffb000 - 000000013fffffff]
[    0.000000]  [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00140000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009b
[    0.000000]     0: 0x00000100 -> 0x000bffa0
[    0.000000]     0: 0x00100000 -> 0x00140000
[    0.000000] On node 0 totalpages: 1048363
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3910 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 765920 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 258048 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] SMP: Allowing 6 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[    0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bffa0000 - 00000000bffb8000
[    0.000000] PM: Registered nosave memory: 00000000bffb8000 - 00000000bffe0000
[    0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000bffee000
[    0.000000] PM: Registered nosave memory: 00000000bffee000 - 00000000bfff0000
[    0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[    0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s83072 r8192 d23424 u262144
[    0.000000] pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1027878
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=b897d510-aa41-47d4-87e2-5b537d4e6845 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ fddc000000 size 32 MB
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[    0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
[    0.000000] Memory: 3965972k/5242880k available (6566k kernel code, 1049428k absent, 227480k reserved, 6637k data, 920k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16640 nr_irqs:728 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3013.669 MHz processor.
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.33 BogoMIPS (lpj=12054676)
[    0.004007] pid_max: default: 32768 minimum: 301
[    0.004026] Security Framework initialized
[    0.004037] AppArmor: AppArmor initialized
[    0.004039] Yama: becoming mindful.
[    0.004360] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.005815] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.008493] Mount-cache hash table entries: 256
[    0.008604] Initializing cgroup subsys cpuacct
[    0.008609] Initializing cgroup subsys memory
[    0.008616] Initializing cgroup subsys devices
[    0.008618] Initializing cgroup subsys freezer
[    0.008619] Initializing cgroup subsys blkio
[    0.008625] Initializing cgroup subsys perf_event
[    0.008648] tseg: 0000000000
[    0.008658] CPU: Physical Processor ID: 0
[    0.008660] CPU: Processor Core ID: 0
[    0.008661] mce: CPU supports 6 MCE banks
[    0.009843] ACPI: Core revision 20110623
[    0.012638] ftrace: allocating 27049 entries in 107 pages
[    0.016602] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.058699] CPU0: AMD Athlon(tm) II X2 250 Processor stepping 02
[    0.060003] Performance Events: AMD PMU driver.
[    0.060003] ... version:                0
[    0.060003] ... bit width:              48
[    0.060003] ... generic registers:      4
[    0.060003] ... value mask:             0000ffffffffffff
[    0.060003] ... max period:             00007fffffffffff
[    0.060003] ... fixed-purpose events:   0
[    0.060003] ... event mask:             000000000000000f
[    0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.060003] Booting Node   0, Processors  #1
[    0.060003] smpboot cpu 1: start_ip = 96000
[    0.148024] NMI watchdog enabled, takes one hw-pmu counter.
[    0.148042] Brought up 2 CPUs
[    0.148044] Total of 2 processors activated (12054.73 BogoMIPS).
[    0.148575] devtmpfs: initialized
[    0.149084] EVM: security.selinux
[    0.149085] EVM: security.SMACK64
[    0.149086] EVM: security.capability
[    0.149138] PM: Registering ACPI NVS region at bffb8000 (163840 bytes)
[    0.149138] print_constraints: dummy:
[    0.149138] RTC time:  3:58:10, date: 10/17/14
[    0.149138] NET: Registered protocol family 16
[    0.149138] node 0 link 0: io port [1000, ffffff]
[    0.149138] TOM: 00000000c0000000 aka 3072M
[    0.149138] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.149138] node 0 link 0: mmio [e0000000, efffffff] ==> none
[    0.149138] node 0 link 0: mmio [a0000, bffff]
[    0.149138] node 0 link 0: mmio [c0000000, fe0bffff] ==> [c0000000, dfffffff] and [f0000000, fe0bffff]
[    0.149138] TOM2: 0000000140000000 aka 5120M
[    0.149138] bus: [00, 07] on node 0 link 0
[    0.149138] bus: 00 index 0 [io  0x0000-0xffff]
[    0.149138] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.149138] bus: 00 index 2 [mem 0xc0000000-0xdfffffff]
[    0.149138] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[    0.149138] bus: 00 index 4 [mem 0x140000000-0xfcffffffff]
[    0.149138] Trying to unpack rootfs image as initramfs...
[    0.149138] Extended Config Space enabled on 1 nodes
[    0.149138] ACPI: bus type pci registered
[    0.149138] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.149138] PCI: not using MMCONFIG
[    0.149138] PCI: Using configuration type 1 for base access
[    0.149138] PCI: Using configuration type 1 for extended access
[    0.156312] bio: create slab <bio-0> at 0
[    0.156549] ACPI: Added _OSI(Module Device)
[    0.156549] ACPI: Added _OSI(Processor Device)
[    0.156549] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.156549] ACPI: Added _OSI(Processor Aggregator Device)
[    0.156913] ACPI: EC: Look up EC in DSDT
[    0.158013] ACPI: Executed 1 blocks of module-level executable AML code
[    0.212520] ACPI: Interpreter enabled
[    0.212526] ACPI: (supports S0 S1 S3 S4 S5)
[    0.212541] ACPI: Using IOAPIC for interrupt routing
[    0.212559] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.213692] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.234970] ACPI: No dock devices found.
[    0.234972] HEST: Table not found.
[    0.234975] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.235099] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.235211] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.235213] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.235215] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.235217] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.235218] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xdfffffff]
[    0.235220] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[    0.235244] pci 0000:00:00.0: [10de:03e2] type 0 class 0x000500
[    0.235409] pci 0000:00:01.0: [10de:03e1] type 0 class 0x000601
[    0.235415] pci 0000:00:01.0: reg 10: [io  0x0900-0x09ff]
[    0.235446] pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05
[    0.235456] pci 0000:00:01.1: reg 10: [io  0x0e00-0x0e3f]
[    0.235470] pci 0000:00:01.1: reg 20: [io  0x0600-0x063f]
[    0.235475] pci 0000:00:01.1: reg 24: [io  0x0700-0x073f]
[    0.235501] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.235506] pci 0000:00:01.1: PME# disabled
[    0.235517] pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500
[    0.235554] pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03
[    0.235561] pci 0000:00:02.0: reg 10: [mem 0xdbefb000-0xdbefbfff]
[    0.235592] pci 0000:00:02.0: supports D1 D2
[    0.235594] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.235596] pci 0000:00:02.0: PME# disabled
[    0.235606] pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03
[    0.235615] pci 0000:00:02.1: reg 10: [mem 0xdbefac00-0xdbefacff]
[    0.235653] pci 0000:00:02.1: supports D1 D2
[    0.235654] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.235657] pci 0000:00:02.1: PME# disabled
[    0.235673] pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604
[    0.235708] pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403
[    0.235718] pci 0000:00:05.0: reg 10: [mem 0xdbef4000-0xdbef7fff]
[    0.235755] pci 0000:00:05.0: PME# supported from D3hot D3cold
[    0.235758] pci 0000:00:05.0: PME# disabled
[    0.235774] pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101
[    0.235793] pci 0000:00:06.0: reg 20: [io  0xffa0-0xffaf]
[    0.235821] pci 0000:00:07.0: [10de:03ef] type 0 class 0x000680
[    0.235829] pci 0000:00:07.0: reg 10: [mem 0xdbef9000-0xdbef9fff]
[    0.235833] pci 0000:00:07.0: reg 14: [io  0xd480-0xd487]
[    0.235864] pci 0000:00:07.0: supports D1 D2
[    0.235865] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.235869] pci 0000:00:07.0: PME# disabled
[    0.235880] pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101
[    0.235886] pci 0000:00:08.0: reg 10: [io  0xd400-0xd407]
[    0.235890] pci 0000:00:08.0: reg 14: [io  0xd080-0xd083]
[    0.235894] pci 0000:00:08.0: reg 18: [io  0xd000-0xd007]
[    0.235897] pci 0000:00:08.0: reg 1c: [io  0xcc00-0xcc03]
[    0.235901] pci 0000:00:08.0: reg 20: [io  0xc880-0xc88f]
[    0.235905] pci 0000:00:08.0: reg 24: [mem 0xdbef8000-0xdbef8fff]
[    0.235931] pci 0000:00:08.1: [10de:03f6] type 0 class 0x000101
[    0.235938] pci 0000:00:08.1: reg 10: [io  0xc800-0xc807]
[    0.235942] pci 0000:00:08.1: reg 14: [io  0xc480-0xc483]
[    0.235945] pci 0000:00:08.1: reg 18: [io  0xc400-0xc407]
[    0.235949] pci 0000:00:08.1: reg 1c: [io  0xc080-0xc083]
[    0.235953] pci 0000:00:08.1: reg 20: [io  0xc000-0xc00f]
[    0.235957] pci 0000:00:08.1: reg 24: [mem 0xdbeef000-0xdbeeffff]
[    0.235986] pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604
[    0.236023] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.236025] pci 0000:00:09.0: PME# disabled
[    0.236037] pci 0000:00:0b.0: [10de:03e9] type 1 class 0x000604
[    0.236060] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.236062] pci 0000:00:0b.0: PME# disabled
[    0.236072] pci 0000:00:0c.0: [10de:03e9] type 1 class 0x000604
[    0.236095] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.236097] pci 0000:00:0c.0: PME# disabled
[    0.236114] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[    0.236128] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[    0.236139] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[    0.236150] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[    0.236165] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[    0.236206] pci 0000:01:07.0: [168c:0013] type 0 class 0x000200
[    0.236218] pci 0000:01:07.0: reg 10: [mem 0x5bff0000-0x5bffffff]
[    0.236292] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
[    0.236295] pci 0000:00:04.0:   bridge window [mem 0xdbf00000-0xdbffffff]
[    0.236298] pci 0000:00:04.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.236300] pci 0000:00:04.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.236302] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.236304] pci 0000:00:04.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.236306] pci 0000:00:04.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[    0.236308] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[    0.236333] pci 0000:02:00.0: [10de:0640] type 0 class 0x000300
[    0.236341] pci 0000:02:00.0: reg 10: [mem 0xdf000000-0xdfffffff]
[    0.236349] pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.236357] pci 0000:02:00.0: reg 1c: [mem 0xdc000000-0xddffffff 64bit]
[    0.236362] pci 0000:02:00.0: reg 24: [io  0xec00-0xec7f]
[    0.236368] pci 0000:02:00.0: reg 30: [mem 0xdef80000-0xdeffffff pref]
[    0.244039] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[    0.244044] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[    0.244047] pci 0000:00:09.0:   bridge window [mem 0xdc000000-0xdfffffff]
[    0.244050] pci 0000:00:09.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.244071] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[    0.244090] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[    0.244105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.244212] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.244244] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[    0.244265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[    0.244285] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[    0.244377]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.244475]  pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[    0.244477] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.247341] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.247406] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10
[    0.247467] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.247526] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.247589] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[    0.247648] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[    0.247708] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[    0.247770] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *11
[    0.247831] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[    0.247892] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[    0.247953] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
[    0.248043] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[    0.248104] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[    0.248165] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[    0.248230] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[    0.248292] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
[    0.248353] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
[    0.248425] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.248526] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.248528] vgaarb: loaded
[    0.248529] vgaarb: bridge control possible 0000:02:00.0
[    0.248601] i2c-core: driver [aat2870] using legacy suspend method
[    0.248602] i2c-core: driver [aat2870] using legacy resume method
[    0.248657] SCSI subsystem initialized
[    0.248843] libata version 3.00 loaded.
[    0.248843] usbcore: registered new interface driver usbfs
[    0.248843] usbcore: registered new interface driver hub
[    0.248968] usbcore: registered new device driver usb
[    0.249164] PCI: Using ACPI for IRQ routing
[    0.255098] PCI: pci_cache_line_size set to 64 bytes
[    0.255130] pci 0000:01:07.0: no compatible bridge window for [mem 0x5bff0000-0x5bffffff]
[    0.255151] reserve RAM buffer: 000000000009b400 - 000000000009ffff
[    0.255153] reserve RAM buffer: 00000000bffa0000 - 00000000bfffffff
[    0.255229] NetLabel: Initializing
[    0.255230] NetLabel:  domain hash size = 128
[    0.255231] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.255242] NetLabel:  unlabeled traffic allowed by default
[    0.255285] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.255290] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.255293] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.264104] Switching to clocksource hpet
[    0.268847] AppArmor: AppArmor Filesystem Enabled
[    0.268874] pnp: PnP ACPI init
[    0.268888] ACPI: bus type pnp registered
[    0.268977] pnp 00:00: [bus 00-ff]
[    0.268979] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.268981] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.268983] pnp 00:00: [io  0x0d00-0xffff window]
[    0.268984] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.268986] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.268988] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[    0.268989] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[    0.269038] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.269058] pnp 00:01: [dma 4]
[    0.269060] pnp 00:01: [io  0x0000-0x000f]
[    0.269061] pnp 00:01: [io  0x0081-0x0083]
[    0.269062] pnp 00:01: [io  0x0087]
[    0.269064] pnp 00:01: [io  0x0089-0x008b]
[    0.269065] pnp 00:01: [io  0x008f]
[    0.269066] pnp 00:01: [io  0x00c0-0x00df]
[    0.269081] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.269088] pnp 00:02: [io  0x0070-0x0071]
[    0.269099] pnp 00:02: [irq 8]
[    0.269116] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.269121] pnp 00:03: [io  0x0061]
[    0.269139] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.269146] pnp 00:04: [io  0x00f0-0x00ff]
[    0.269153] pnp 00:04: [irq 13]
[    0.269167] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.269648] pnp 00:05: [io  0x0378-0x037f]
[    0.269655] pnp 00:05: [irq 7]
[    0.269657] pnp 00:05: [dma 0 disabled]
[    0.269826] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.270081] pnp 00:06: [mem 0x000d0000-0x000d3fff window]
[    0.270083] pnp 00:06: [mem 0x000d4000-0x000d7fff window]
[    0.270085] pnp 00:06: [mem 0x000de000-0x000dffff window]
[    0.270086] pnp 00:06: [io  0x0010-0x001f]
[    0.270087] pnp 00:06: [io  0x0022-0x003f]
[    0.270089] pnp 00:06: [io  0x0044-0x004d]
[    0.270090] pnp 00:06: [io  0x0050-0x005f]
[    0.270091] pnp 00:06: [io  0x0062-0x0063]
[    0.270093] pnp 00:06: [io  0x0065-0x006f]
[    0.270094] pnp 00:06: [io  0x0072-0x007f]
[    0.270095] pnp 00:06: [io  0x0080]
[    0.270096] pnp 00:06: [io  0x0084-0x0086]
[    0.270098] pnp 00:06: [io  0x0088]
[    0.270099] pnp 00:06: [io  0x008c-0x008e]
[    0.270100] pnp 00:06: [io  0x0090-0x009f]
[    0.270101] pnp 00:06: [io  0x00a2-0x00bf]
[    0.270103] pnp 00:06: [io  0x00e0-0x00ef]
[    0.270104] pnp 00:06: [io  0x04d0-0x04d1]
[    0.270105] pnp 00:06: [io  0x0800-0x080f]
[    0.270107] pnp 00:06: [io  0x0500-0x057f]
[    0.270108] pnp 00:06: [io  0x0580-0x05ff]
[    0.270109] pnp 00:06: [io  0x0800-0x087f]
[    0.270110] pnp 00:06: [io  0x0880-0x08ff]
[    0.270112] pnp 00:06: [io  0x0d00-0x0d7f]
[    0.270113] pnp 00:06: [io  0x0d80-0x0dff]
[    0.270114] pnp 00:06: [io  0x0900-0x097f]
[    0.270115] pnp 00:06: [io  0x0980-0x09ff]
[    0.270117] pnp 00:06: [io  0x1100-0x117f]
[    0.270120] pnp 00:06: [io  0x1180-0x11ff]
[    0.270122] pnp 00:06: [mem 0xfec80000-0x1fd93ffff]
[    0.270123] pnp 00:06: [mem 0xfefe0000-0xfefe01ff]
[    0.270125] pnp 00:06: [mem 0xfefe1000-0xfefe1fff]
[    0.270126] pnp 00:06: [mem 0xfee01000-0xfeefffff]
[    0.270132] pnp 00:06: disabling [io  0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io  0x0900-0x09ff]
[    0.270134] pnp 00:06: disabling [io  0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io  0x0900-0x09ff]
[    0.270197] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.270199] system 00:06: [io  0x0800-0x080f] has been reserved
[    0.270201] system 00:06: [io  0x0500-0x057f] has been reserved
[    0.270203] system 00:06: [io  0x0580-0x05ff] has been reserved
[    0.270205] system 00:06: [io  0x0800-0x087f] could not be reserved
[    0.270207] system 00:06: [io  0x0880-0x08ff] has been reserved
[    0.270209] system 00:06: [io  0x0d00-0x0d7f] has been reserved
[    0.270211] system 00:06: [io  0x0d80-0x0dff] has been reserved
[    0.270213] system 00:06: [io  0x1100-0x117f] has been reserved
[    0.270214] system 00:06: [io  0x1180-0x11ff] has been reserved
[    0.270217] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved
[    0.270219] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
[    0.270221] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
[    0.270223] system 00:06: [mem 0xfec80000-0x1fd93ffff] could not be reserved
[    0.270225] system 00:06: [mem 0xfefe0000-0xfefe01ff] has been reserved
[    0.270227] system 00:06: [mem 0xfefe1000-0xfefe1fff] has been reserved
[    0.270229] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
[    0.270232] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.270279] pnp 00:07: [mem 0xfed00000-0xfed00fff]
[    0.270295] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.270333] pnp 00:08: [mem 0xfec00000-0xfec00fff]
[    0.270334] pnp 00:08: [mem 0xfee00000-0xfee00fff]
[    0.270336] pnp 00:08: [mem 0xc0000000-0xbfffffff disabled]
[    0.270364] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.270366] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.270368] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.270478] pnp 00:09: [io  0x0000-0xffffffffffffffff disabled]
[    0.270479] pnp 00:09: [io  0x0230-0x023f]
[    0.270481] pnp 00:09: [io  0x0290-0x029f]
[    0.270482] pnp 00:09: [io  0x0a00-0x0a0f]
[    0.270483] pnp 00:09: [io  0x0a30-0x0a3f]
[    0.270512] system 00:09: [io  0x0230-0x023f] has been reserved
[    0.270514] system 00:09: [io  0x0290-0x029f] has been reserved
[    0.270516] system 00:09: [io  0x0a00-0x0a0f] has been reserved
[    0.270517] system 00:09: [io  0x0a30-0x0a3f] has been reserved
[    0.270519] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.270858] pnp 00:0a: [io  0x03f8-0x03ff]
[    0.270865] pnp 00:0a: [irq 4]
[    0.270866] pnp 00:0a: [dma 0 disabled]
[    0.270926] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.270954] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[    0.270981] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.270983] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.271071] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[    0.271072] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[    0.271074] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[    0.271075] pnp 00:0c: [mem 0x00100000-0xbfffffff]
[    0.271077] pnp 00:0c: [mem 0xfec00000-0xffffffff]
[    0.271108] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.271110] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.271112] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.271114] system 00:0c: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.271116] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.271119] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.271284] pnp: PnP ACPI: found 13 devices
[    0.271285] ACPI: ACPI bus type pnp unregistered
[    0.276955] PCI: max bus depth: 1 pci_try_num: 2
[    0.276971] pci 0000:01:07.0: BAR 0: assigned [mem 0xdbf00000-0xdbf0ffff]
[    0.276975] pci 0000:01:07.0: BAR 0: error updating (0xdbf00000 != 0x5bf00000)
[    0.276977] pci 0000:01:07.0: BAR 0: set to [mem 0xdbf00000-0xdbf0ffff] (PCI address [0xdbf00000-0xdbf0ffff])
[    0.276979] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[    0.276982] pci 0000:00:04.0:   bridge window [mem 0xdbf00000-0xdbffffff]
[    0.276987] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[    0.276988] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[    0.276991] pci 0000:00:09.0:   bridge window [mem 0xdc000000-0xdfffffff]
[    0.276993] pci 0000:00:09.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.276996] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[    0.277000] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[    0.277007] pci 0000:00:04.0: setting latency timer to 64
[    0.277011] pci 0000:00:09.0: setting latency timer to 64
[    0.277014] pci 0000:00:0b.0: setting latency timer to 64
[    0.277018] pci 0000:00:0c.0: setting latency timer to 64
[    0.277020] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.277022] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.277024] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.277026] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.277027] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.277029] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.277031] pci_bus 0000:01: resource 1 [mem 0xdbf00000-0xdbffffff]
[    0.277033] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.277035] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.277037] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.277039] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[    0.277040] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.277042] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.277044] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.277046] pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdfffffff]
[    0.277048] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.277081] NET: Registered protocol family 2
[    0.277199] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.278188] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.281142] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.281492] TCP: Hash tables configured (established 524288 bind 65536)
[    0.281493] TCP reno registered
[    0.281504] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.281538] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.281640] NET: Registered protocol family 1
[    0.281826] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.281841] pci 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[    0.860054] pci 0000:00:02.0: PCI INT A disabled
[    0.860198] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.860213] pci 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[    0.860233] pci 0000:00:02.1: PCI INT B disabled
[    0.860274] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.860317] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.860370] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.860421] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.860471] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.860526] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.860583] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.860644] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.860662] pci 0000:02:00.0: Boot video device
[    0.860664] PCI: CLS 64 bytes, default 64
[    0.881409] Freeing initrd memory: 13860k freed
[    0.886521] PCI-DMA: Disabling AGP.
[    0.888967] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    0.888968] PCI-DMA: using GART IOMMU.
[    0.888971] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.891395] IBS: LVT offset 1 assigned
[    0.891408] perf: AMD IBS detected (0x0000001f)
[    0.891559] audit: initializing netlink socket (disabled)
[    0.891570] type=2000 audit(1413518290.884:1): initialized
[    0.916857] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.934104] VFS: Disk quotas dquot_6.5.2
[    0.934150] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.934571] fuse init (API version 7.17)
[    0.934717] msgmni has been set to 7901
[    0.935108] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.935136] io scheduler noop registered
[    0.935139] io scheduler deadline registered
[    0.935184] io scheduler cfq registered (default)
[    0.935343] pcieport 0000:00:09.0: setting latency timer to 64
[    0.935368] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[    0.935477] pcieport 0000:00:0b.0: setting latency timer to 64
[    0.935494] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[    0.935570] pcieport 0000:00:0c.0: setting latency timer to 64
[    0.935585] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[    0.935675] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.935697] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.935800] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.935804] ACPI: Power Button [PWRB]
[    0.935834] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.935837] ACPI: Power Button [PWRF]
[    0.937633] ERST: Table is not found!
[    0.937635] GHES: HEST is not enabled!
[    0.937729] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.958047] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.072641] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.088301] Linux agpgart interface v0.103
[    1.089521] brd: module loaded
[    1.090265] loop: module loaded
[    1.090526] pata_acpi 0000:00:06.0: setting latency timer to 64
[    1.090735] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[    1.090749] pata_acpi 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
[    1.090763] pata_acpi 0000:00:08.0: setting latency timer to 64
[    1.090767] pata_acpi 0000:00:08.0: PCI INT A disabled
[    1.090934] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[    1.090943] pata_acpi 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
[    1.090952] pata_acpi 0000:00:08.1: setting latency timer to 64
[    1.090956] pata_acpi 0000:00:08.1: PCI INT B disabled
[    1.091415] Fixed MDIO Bus: probed
[    1.091430] tun: Universal TUN/TAP device driver, 1.6
[    1.091431] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.091500] PPP generic driver version 2.4.2
[    1.091619] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.091681] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[    1.091706] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    1.091709] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    1.091779] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    1.091797] ehci_hcd 0000:00:02.1: debug port 1
[    1.091803] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    1.091837] ehci_hcd 0000:00:02.1: irq 22, io mem 0xdbefac00
[    1.100038] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    1.100188] hub 1-0:1.0: USB hub found
[    1.100192] hub 1-0:1.0: 10 ports detected
[    1.100294] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.100365] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[    1.100383] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    1.100385] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    1.100456] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    1.100481] ohci_hcd 0000:00:02.0: irq 23, io mem 0xdbefb000
[    1.158173] hub 2-0:1.0: USB hub found
[    1.158178] hub 2-0:1.0: 10 ports detected
[    1.158274] uhci_hcd: USB Universal Host Controller Interface driver
[    1.158324] usbcore: registered new interface driver libusual
[    1.158355] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.158765] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.158771] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.158895] mousedev: PS/2 mouse device common for all mice
[    1.159001] rtc_cmos 00:02: RTC can wake from S4
[    1.159145] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.159183] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.159241] device-mapper: uevent: version 1.0.3
[    1.159319] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.159325] cpuidle: using governor ladder
[    1.159326] cpuidle: using governor menu
[    1.159327] EFI Variables Facility v0.08 2004-May-17
[    1.159478] TCP cubic registered
[    1.159547] NET: Registered protocol family 10
[    1.159871] NET: Registered protocol family 17
[    1.159880] Registering the dns_resolver key type
[    1.159996] PM: Hibernation image not present or could not be loaded.
[    1.160020] registered taskstats version 1
[    1.172292]   Magic number: 2:61:968
[    1.172396] rtc_cmos 00:02: setting system clock to 2014-10-17 03:58:11 UTC (1413518291)
[    1.172403] powernow-k8: Found 1 AMD Athlon(tm) II X2 250 Processor (2 cpu cores) (version 2.20.00)
[    1.172430] powernow-k8:    0 : pstate 0 (3000 MHz)
[    1.172431] powernow-k8:    1 : pstate 1 (2300 MHz)
[    1.172433] powernow-k8:    2 : pstate 2 (1800 MHz)
[    1.172434] powernow-k8:    3 : pstate 3 (800 MHz)
[    1.172773] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.172774] EDD information not available.
[    1.174029] Freeing unused kernel memory: 920k freed
[    1.174196] Write protecting the kernel read-only data: 12288k
[    1.178378] Freeing unused kernel memory: 1608k freed
[    1.181956] Freeing unused kernel memory: 1196k freed
[    1.200384] udevd[116]: starting version 175
[    1.253470] sata_nv 0000:00:08.0: version 3.5
[    1.253485] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
[    1.253525] sata_nv 0000:00:08.0: setting latency timer to 64
[    1.256170] scsi0 : sata_nv
[    1.258483] scsi1 : sata_nv
[    1.258599] ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 21
[    1.258602] ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 21
[    1.261423] pata_amd 0000:00:06.0: version 0.4.1
[    1.261460] pata_amd 0000:00:06.0: setting latency timer to 64
[    1.263483] scsi2 : pata_amd
[    1.264097] scsi3 : pata_amd
[    1.264406] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.264408] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.266210] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.266363] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[    1.266368] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
[    1.266372] forcedeth 0000:00:07.0: setting latency timer to 64
[    1.329133] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr e0:cb:4e:cb:eb:01
[    1.329137] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[    1.329231] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
[    1.329267] sata_nv 0000:00:08.1: setting latency timer to 64
[    1.329437] scsi4 : sata_nv
[    1.329485] scsi5 : sata_nv
[    1.329571] ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 20
[    1.329573] ata6: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 20
[    1.412050] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.650273] ata5: SATA link down (SStatus 0 SControl 300)
[    1.724067] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.732462] ata1.00: ATA-8: ST500DM002-1BD142, KC43, max UDMA/133
[    1.732466] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.748447] ata1.00: configured for UDMA/133
[    1.748644] scsi 0:0:0:0: Direct-Access     ATA      ST500DM002-1BD14 KC43 PQ: 0 ANSI: 5
[    1.748808] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.748903] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.748906] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.748939] sd 0:0:0:0: [sda] Write Protect is off
[    1.748941] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.748956] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.784016]  sda: sda1 sda2 < sda5 > sda3 sda4
[    1.784376] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.888059] Refined TSC clocksource calibration: 3013.705 MHz.
[    1.888070] Switching to clocksource tsc
[    1.900041] usb 1-4: new high-speed USB device number 4 using ehci_hcd
[    2.216050] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.224335] ata2.00: ATA-8: WDC WD5000AAKX-08ERMA0, 19.01H19, max UDMA/100
[    2.224338] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.240343] ata2.00: configured for UDMA/100
[    2.240507] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-0 19.0 PQ: 0 ANSI: 5
[    2.240646] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.240649] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.240683] sd 1:0:0:0: [sdb] Write Protect is off
[    2.240688] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.240716] ata4: port disabled--ignoring
[    2.240735] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.246800]  sdb: sdb1
[    2.247067] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.340041] usb 2-2: new full-speed USB device number 2 using ohci_hcd
[    2.562263] ata6: SATA link down (SStatus 0 SControl 300)
[    2.574252] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2
[    2.574339] generic-usb 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-2/input0
[    2.581387] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input3
[    2.581524] generic-usb 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-2/input1
[    2.581539] usbcore: registered new interface driver usbhid
[    2.581540] usbhid: USB HID core driver
[    2.965845] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   12.288185] Adding 7816188k swap on /dev/sda5.  Priority:-1 extents:1 across:7816188k
[   12.295723] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.318360] udevd[375]: starting version 175
[   12.434996] lp: driver loaded but no devices found
[   12.449428] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   12.472858] parport_pc 00:05: reported by Plug and Play ACPI
[   12.472902] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   12.490551] cfg80211: Calling CRDA to update world regulatory domain
[   12.569751] wmi: Mapper loaded
[   12.572215] lp0: using parport0 (interrupt-driven).
[   12.572508] [drm] Initialized drm 1.1.0 20060810
[   12.581160] VGA switcheroo: detected Optimus DSM method \ handle
[   12.583035] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
[   12.583053] nouveau 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19
[   12.583057] nouveau 0000:02:00.0: setting latency timer to 64
[   12.584104] [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x096000c1)
[   12.586654] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[   12.628337] MCE: In-kernel MCE decoding enabled.
[   12.629680] Linux video capture interface: v2.00
[   12.637207] EDAC MC: Ver: 2.1.0
[   12.639806] [drm] nouveau 0000:02:00.0: ... appears to be valid
[   12.639809] [drm] nouveau 0000:02:00.0: BIT BIOS found
[   12.639812] [drm] nouveau 0000:02:00.0: Bios version 62.94.80.00
[   12.639815] [drm] nouveau 0000:02:00.0: TMDS table version 2.0
[   12.639817] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[   12.639820] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028
[   12.639822] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 02000302 00020030
[   12.639824] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028
[   12.639825] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 01022332 00020010
[   12.639828] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4
[   12.639830] [drm] nouveau 0000:02:00.0:   0: 0x00002030: type 0x30 idx 0 tag 0x08
[   12.639832] [drm] nouveau 0000:02:00.0:   1: 0x00000100: type 0x00 idx 1 tag 0xff
[   12.639834] [drm] nouveau 0000:02:00.0:   2: 0x00001261: type 0x61 idx 2 tag 0x07
[   12.639838] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xC2F1
[   12.641566] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0802)
[   12.642487] AMD64 EDAC driver v3.4.0
[   12.646019] cfg80211: World regulatory domain updated:
[   12.646022] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.646024] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.646026] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.646028] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.646029] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.646031] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.664254] ppdev: user-space parallel port driver
[   12.664957] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xC757
[   12.667942] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xD7DF
[   12.667949] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xD900
[   12.669023] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xDC1B
[   12.669025] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xDC80
[   12.682859] input: UVC Camera (046d:0802) as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/input/input4
[   12.682999] usbcore: registered new interface driver uvcvideo
[   12.683001] USB Video Class driver (1.1.1)
[   12.688871] [drm] nouveau 0000:02:00.0: 0xDC80: Condition still not met after 20ms, skipping following opcodes
[   12.688891] EDAC amd64: DRAM ECC disabled.
[   12.688897] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   12.688898]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   12.688899]  (Note that use of the override may cause unknown side effects.)
[   12.708071] [drm] nouveau 0000:02:00.0: 1 available performance level(s)
[   12.708075] [drm] nouveau 0000:02:00.0: 3: core 550MHz shader 1375MHz memory 400MHz voltage 1100mV fanspeed 100%
[   12.708089] [drm] nouveau 0000:02:00.0: c: core 400MHz shader 800MHz memory 399MHz voltage 1100mV
[   12.709288] [TTM] Zone  kernel: Available graphics memory: 2024754 kiB.
[   12.709289] [TTM] Initializing pool allocator.
[   12.709297] [drm] nouveau 0000:02:00.0: Detected 1024MiB VRAM
[   12.709625] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[   12.726686] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   12.726688] [drm] No driver support for vblank timestamp query.
[   12.778956] ACPI: resource nForce2_smbus [io  0x0600-0x063f] conflicts with ACPI region SMRG [io 0x600-0x6ff]
[   12.778958] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.778981] i2c i2c-2: nForce2 SMBus adapter at 0x700
[   12.823842] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   12.823845] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.823847] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   12.823850] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.823851] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   12.823853] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.823855] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   12.823856] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.823858] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   12.823860] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.823861] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   12.823863] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.823865] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   12.823866] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.823868] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   12.823870] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.823871] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   12.823873] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.823875] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   12.823876] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.823878] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   12.823880] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.823881] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   12.823883] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.823885] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   12.823886] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.823888] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   12.823890] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.831168] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.831523] ieee80211 phy0: hwaddr 00:e0:4c:82:bc:88, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[   12.869037] rtl8187: Customer ID is 0x00
[   12.869099] Registered led device: rtl8187-phy0::radio
[   12.869128] Registered led device: rtl8187-phy0::tx
[   12.869154] Registered led device: rtl8187-phy0::rx
[   12.873154] rtl8187: wireless switch is on
[   12.873224] usbcore: registered new interface driver rtl8187
[   12.884238] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[   12.884255] ath5k 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 18 (level, low) -> IRQ 18
[   12.884310] ath5k 0000:01:07.0: registered as 'phy1'
[   12.886705] ath5k phy1: POST Failed !!!
[   12.886722] ath5k 0000:01:07.0: PCI INT A disabled
[   12.886739] ath5k: probe of 0000:01:07.0 failed with error -11
[   12.900511] [drm] nouveau 0000:02:00.0: allocated 1440x900 fb: 0x330000, bo ffff8801379f6800
[   12.901161] fbcon: nouveaufb (fb0) is primary device
[   12.901212] Console: switching to colour frame buffer device 180x56
[   12.901233] fb0: nouveaufb frame buffer device
[   12.901234] drm: registered panic notifier
[   12.901242] [drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0
[   13.323948] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[   13.323954] snd_hda_intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[   13.323956] hda_intel: Disabling MSI
[   13.323987] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[   13.504612] init: failsafe main process (716) killed by TERM signal
[   13.541627] Bluetooth: Core ver 2.16
[   13.541698] NET: Registered protocol family 31
[   13.541700] Bluetooth: HCI device and connection manager initialized
[   13.541703] Bluetooth: HCI socket layer initialized
[   13.541705] Bluetooth: L2CAP socket layer initialized
[   13.542014] Bluetooth: SCO socket layer initialized
[   13.556366] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.556369] Bluetooth: BNEP filters: protocol multicast
[   13.675479] Bluetooth: RFCOMM TTY layer initialized
[   13.675484] Bluetooth: RFCOMM socket layer initialized
[   13.675485] Bluetooth: RFCOMM ver 1.11
[   13.755377] usbcore: registered new interface driver snd-usb-audio
[   14.608153] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input5
[   14.608280] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
[   14.608341] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
[   14.608383] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[   14.608424] input: HDA NVidia Line-Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[   15.986185] init: plymouth-stop pre-start process (1302) terminated with status 1
[   16.629722] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   16.630048] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   16.632281] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[   16.632498] forcedeth 0000:00:07.0: eth0: no link during initialization
[   16.635731] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.637546] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.035266] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[   71.765256] wlan0: authenticate with 50:67:f0:9a:97:b6 (try 1)
[   71.768281] wlan0: authenticated
[   72.001281] wlan0: associate with 50:67:f0:9a:97:b6 (try 1)
[   72.006671] wlan0: RX AssocResp from 50:67:f0:9a:97:b6 (capab=0x431 status=0 aid=1)
[   72.006674] wlan0: associated
[   72.009353] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   72.010017] cfg80211: Calling CRDA for country: TR
[   72.013120] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   72.013123] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   72.013125] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   72.013127] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   72.013129] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   72.013131] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   72.013132] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   72.013134] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   72.013136] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   72.013137] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   72.013139] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   72.013141] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   72.013142] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   72.013144] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   72.013145] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   72.013147] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   72.013149] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   72.013151] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   72.013152] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   72.013154] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   72.013155] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   72.013157] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   72.013159] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   72.013160] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   72.013162] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   72.013164] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   72.013165] cfg80211: Disabling freq 2484 MHz
[   72.013167] cfg80211: Regulatory domain changed to country: TR
[   72.013168] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   72.013170] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   72.013172] cfg80211:     (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   72.013173] cfg80211:     (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   82.976046] wlan0: no IPv6 routers present
[  102.308426] wlan0: deauthenticating from 50:67:f0:9a:97:b6 by local choice (reason=3)
[  102.421374] cfg80211: All devices are disconnected, going to restore regulatory settings
[  102.421387] cfg80211: Restoring regulatory settings
[  102.421398] cfg80211: Calling CRDA to update world regulatory domain
[  102.431524] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[  102.431528] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  102.431530] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[  102.431532] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  102.431534] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[  102.431536] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  102.431537] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[  102.431539] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  102.431541] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[  102.431543] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  102.431544] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[  102.431546] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  102.431548] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[  102.431549] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  102.431551] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[  102.431553] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  102.431554] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[  102.431556] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  102.431558] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[  102.431560] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  102.431561] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[  102.431563] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  102.431565] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[  102.431566] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  102.431568] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[  102.431570] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  102.431571] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[  102.431573] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  102.431575] cfg80211: World regulatory domain updated:
[  102.431577] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  102.431578] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  102.431580] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  102.431582] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  102.431583] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  102.431585] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  113.812827] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[  114.253298] wlan0: authenticate with 00:26:75:84:14:8f (try 1)
[  114.255221] wlan0: authenticated
[  114.377327] wlan0: associate with 00:26:75:84:14:8f (try 1)
[  114.391451] wlan0: RX AssocResp from 00:26:75:84:14:8f (capab=0x411 status=0 aid=3)
[  114.391460] wlan0: associated
[  124.752048] wlan0: no IPv6 routers present
[  145.812203] wlan0: deauthenticating from 00:26:75:84:14:8f by local choice (reason=3)
[  145.929352] cfg80211: All devices are disconnected, going to restore regulatory settings
[  145.929366] cfg80211: Restoring regulatory settings
[  145.929377] cfg80211: Calling CRDA to update world regulatory domain
[  145.947756] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[  145.947767] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  145.947774] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[  145.947782] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  145.947788] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[  145.947795] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  145.947801] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[  145.947808] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  145.947813] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[  145.947820] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  145.947826] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[  145.947833] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  145.947838] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[  145.947845] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  145.947851] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[  145.947858] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  145.947863] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[  145.947870] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  145.947876] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[  145.947883] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  145.947888] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[  145.947895] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  145.947901] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[  145.947908] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  145.947914] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[  145.947920] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  145.947926] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[  145.947933] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  145.947941] cfg80211: World regulatory domain updated:
[  145.947945] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  145.947952] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  145.947958] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  145.947964] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  145.947970] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  145.947977] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  154.204091] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[  154.657342] wlan0: direct probe to f8:d1:11:9a:a3:7d (try 1/3)
[  154.663108] wlan0: direct probe responded
[  154.663223] wlan0: authenticate with f8:d1:11:9a:a3:7d (try 1)
[  154.668093] wlan0: authenticated
[  154.789342] wlan0: associate with f8:d1:11:9a:a3:7d (try 1)
[  154.794290] wlan0: RX AssocResp from f8:d1:11:9a:a3:7d (capab=0x411 status=0 aid=5)
[  154.794300] wlan0: associated
[  207.854468] wlan0: deauthenticating from f8:d1:11:9a:a3:7d by local choice (reason=3)
[  207.961411] cfg80211: All devices are disconnected, going to restore regulatory settings
[  207.961424] cfg80211: Restoring regulatory settings
[  207.961436] cfg80211: Calling CRDA to update world regulatory domain
[  207.965590] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[  207.965594] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  207.965596] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[  207.965598] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  207.965599] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[  207.965601] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  207.965603] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[  207.965605] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  207.965606] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[  207.965608] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  207.965610] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[  207.965611] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  207.965613] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[  207.965615] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  207.965616] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[  207.965618] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  207.965620] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[  207.965622] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  207.965623] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[  207.965625] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  207.965627] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[  207.965628] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  207.965630] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[  207.965632] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  207.965633] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[  207.965635] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  207.965637] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[  207.965639] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  207.965641] cfg80211: World regulatory domain updated:
[  207.965642] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  207.965644] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  207.965646] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  207.965647] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  207.965649] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  207.965651] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  210.742477] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[  211.153361] wlan0: authenticate with 50:67:f0:9a:97:b6 (try 1)
[  211.154996] wlan0: authenticated
[  211.277355] wlan0: associate with 50:67:f0:9a:97:b6 (try 1)
[  211.281475] wlan0: RX AssocResp from 50:67:f0:9a:97:b6 (capab=0x431 status=0 aid=1)
[  211.281485] wlan0: associated
[  211.288525] cfg80211: Calling CRDA for country: TR
[  211.294782] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[  211.294794] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  211.294801] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[  211.294808] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  211.294814] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[  211.294821] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  211.294827] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[  211.294834] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  211.294839] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[  211.294846] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  211.294851] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[  211.294858] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  211.294864] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[  211.294871] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  211.294876] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[  211.294883] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  211.294889] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[  211.294896] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  211.294901] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[  211.294908] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  211.294914] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[  211.294921] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  211.294926] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[  211.294933] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  211.294938] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[  211.294945] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  211.294950] cfg80211: Disabling freq 2484 MHz
[  211.294958] cfg80211: Regulatory domain changed to country: TR
[  211.294962] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  211.294969] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  211.294974] cfg80211:     (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  211.294980] cfg80211:     (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  222.192035] wlan0: no IPv6 routers present


Kod Seç Genişlet

~ $ dmesg | tail
[  211.294933] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  211.294938] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[  211.294945] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  211.294950] cfg80211: Disabling freq 2484 MHz
[  211.294958] cfg80211: Regulatory domain changed to country: TR
[  211.294962] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  211.294969] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  211.294974] cfg80211:     (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  211.294980] cfg80211:     (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  222.192035] wlan0: no IPv6 routers present


[kindly34]

Merhaba aşağıdaki dosyaları boş bir klasöre indirin.

http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.17.1-utopic/linux-headers-3.17.1-031701-generic_3.17.1-031701.201410150735_amd64.deb

http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.17.1-utopic/linux-headers-3.17.1-031701_3.17.1-031701.201410150735_all.deb

http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.17.1-utopic/linux-image-3.17.1-031701-generic_3.17.1-031701.201410150735_amd64.deb

İndirdiğiniz dosyaların bulunduğu klasörü açın ve mouse ile sağ tıklayıp "Terminali burada aç" diyin ve aşağıdaki komutu girin.

Kod Seç Genişlet

sudo dpkg -i *.deb

Son olarak sistemi yeniden başlatın.

Kod Seç Genişlet

sudo reboot

[bytan]

Gerekirse başlığa bakarak, alttaki parametreleri önce geçici, sorunu çözdüğünü gördüğünde ise kalıcı olarak eklemek isteyebilirsin:

pci=biosirq acpi=force

https://forum.ubuntu-tr.net/index.php?topic=31554.0

[mustineo]

@kindly34 ve @bytan ın önerilerini yaptım ancak ikisi de sorunu çözmedi maalesef.

[if]

Kod Seç Genişlet

echo "options ath5k nohwcrypt=1" | sudo tee /etc/modprobe.d/ath5k.conf
sudo modprobe -r ath5k
sudo modprobe ath5k

http://ubuntuforums.org/archive/index.php/t-2061745.html

Let me add that so far the only help from the ath5k devel list is to physically block pin 13 on the card. I do not know if this works. However, rfkill=0 worked fine by the ath_pci driver.

[1]

Kod Seç Genişlet

sudo rfkill list
sudo modprobe -r ath5k
sudo rfkill unblock all
sudo modprobe ath5k


[1] https://bugs.mageia.org/show_bug.cgi?id=2366

[mustineo]

@if in verdiği kod kumeleri de maalesef sorunu çözmedi.

[if]

Kod Seç Genişlet

sudo rfkill list
sudo modprobe -r ath5k
sudo rfkill unblock all
sudo modprobe ath5k
dmesg | tail -n 40 çıktılarını göreyim.

[mustineo]

Kod Seç Genişlet

~ $ sudo rfkill list
[sudo] password for historian:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no


Kod Seç Genişlet

~ $ dmesg | tail -n 40
[   16.376087] nouveau E[     PFB][0000:02:00.0] trapped write at 0x010109f080 on channel 0x0003fee0 [unknown] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT
[   16.432841] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.432845] Bluetooth: BNEP filters: protocol multicast
[   16.432852] Bluetooth: BNEP socket layer initialized
[   16.503965] Bluetooth: RFCOMM TTY layer initialized
[   16.503977] Bluetooth: RFCOMM socket layer initialized
[   16.503987] Bluetooth: RFCOMM ver 1.11
[   16.942024] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[   16.942090] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[   16.942148] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
[   16.942204] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
[   16.942258] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
[   17.379473] nouveau E[     PFB][0000:02:00.0] trapped write at 0x010109f0e4 on channel 0x0003fee0 [unknown] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT
[   17.649429] nouveau E[     PFB][0000:02:00.0] trapped write at 0x010109f140 on channel 0x0003fee0 [unknown] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT
[   18.008683] init: plymouth-stop pre-start process (1412) terminated with status 1
[   18.702243] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.745871] forcedeth 0000:00:07.0: irq 28 for MSI/MSI-X
[   18.745897] forcedeth 0000:00:07.0 eth0: MSI enabled
[   18.746112] forcedeth 0000:00:07.0 eth0: no link during initialization
[   18.746407] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.104481] wlan0: authenticate with 50:67:f0:9a:76:e2
[   23.334949] wlan0: send auth to 50:67:f0:9a:76:e2 (try 1/3)
[   23.337655] wlan0: authenticated
[   23.337902] rtl8187 1-4:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   23.337907] rtl8187 1-4:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   23.339958] wlan0: associate with 50:67:f0:9a:76:e2 (try 1/3)
[   23.346911] wlan0: RX AssocResp from 50:67:f0:9a:76:e2 (capab=0x431 status=0 aid=2)
[   23.347650] wlan0: associated
[   23.347663] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   23.348188] cfg80211: Calling CRDA for country: TR
[   23.351455] cfg80211: Regulatory domain changed to country: TR
[   23.351459] cfg80211:  DFS Master region: unset
[   23.351460] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   23.351462] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   23.351464] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   23.351465] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm), (0 s)
[   23.550953] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 50:67:f0:9a:76:e2
[  163.912260] ath5k 0000:01:07.0: registered as 'phy2'
[  163.933612] ath5k: phy2: failed to wakeup the MAC Chip
[  163.933815] ath5k: probe of 0000:01:07.0 failed with error -5


[if]

Kod Seç Genişlet

sudo -H gedit /etc/modprobe.d/ath5k.conf dosyasını açıp

Kod Seç Genişlet

options ath5k nohwcrypt=1 satırının sonuna no_hw_rfkill_switch=1 yazıp kaydedin. Sonra

Kod Seç Genişlet

sudo rfkill list
sudo modprobe -r ath5k
sudo rfkill unblock all
sudo modprobe ath5k

https://bugzilla.kernel.org/show_bug.cgi?id=13900

[mustineo]

Dediğiniz üzere gedit ile satırı ekledim. Ancak modprobe komutlarını çalıştırırken bu hatayı vermekte.

Kod Seç Genişlet

WARNING: /etc/modprobe.d/ath5k.conf line 2: ignoring bad line starting with 'no_hw_rfkill_switch=1'

[if]

/etc/modprobe.d/ath5k.conf içeriğine bakayım.

[mustineo]

Sadece iki satır var.
options ath5k nohwcrypt=1
no_hw_rfkill_switch=1

[if]

Tek satır olması gerek:

Kod Seç Genişlet

options ath5k nohwcrypt=1 no_hw_rfkill_switch=1

[mustineo]

Kodları tekrar uyguladım. Hata vermedi. Yeniden başlattım ancak wifi kart hâlâ pasif durumda

[heartsmagic]

Şu an hangi çekirdek üzerindesin, 3.17 mi? Bir de, kart görünmüyor derken nerede görünmüyor? İkinci iletindeki çıktılarda esasında uçbirimde ağları taramış ve bulmuş da.

[mustineo]

3.17 deyim. Ağ kartı ağ ayarları menüsünde görünmemekte. Ağı gören başka rtl8187 olan başka bir aygıt. ath5k görünmemekte.

[if]

Bu aygıt sıkıntılıymış. Geçtiğim hata kayıtlarından bir sürü var ortalıkta. Networkmanager'ı kaldırıl elle ağa bağlanıp sorunu çözen var, deneyebiliriz.

[mustineo]

iwconfig komutunda da aygıt görünmemekte maalesef.

[heartsmagic]

Harbiden nasıl bir kartmış böyle. Eski çekirdeklerde sorun yok gibi sanki. Şunu bir dener misin çekirdek parametreleri için: acpi=force irqpoll noapictimer
Nasıl yapacağını şuradan öğrenebilirsin: cekirdekkonusu

[mustineo]

Ben eskiden kullanabildiğimi hatırlıyorum. Grub açılışında e tuşuna basarak quiet splashın olduğu satırın sonuna tırnak içinde dediğiniz komutu yazıp ctrl+x yaptım ancak bir değişiklik olmadı.

[heartsmagic]

Açıkçası pek bir şey öneremiyorum ne yazık ki. Bayağı bir bakındık bu kart için fakat etrafta görülen çözümlerin hiçbiri işe yaramıyor gibi.
Eğer mevcut değilse çekirdek tarafına bir hata kaydı bırakılabilir.

[if]

@mustineo, alınan hatalar sadece eski çekirdeklerde var. Güncel bir çekirdek kurmak gerek. Linux Mint 13 Ubuntu 12.04 temelliymiş. Ubuntu'da LTS sürümlere daha güncel sürümlerin çekirdekleri vs. kurlabiliniyor. Buna da donanım yetkilendirme kümesi "hardware enablement stacks" deniyor. Bir şekilde daha güncel bir çekirdek kurmanız gerek.

[mustineo]

@if dediğiniz üzere trusty sürümünün çekirdeğini yüklemek için

Kod Seç Genişlet

sudo apt-get install --install-recommends linux-generic-lts-trusty xserver-xorg-lts-trusty libgl1-mesa-glx-lts-trusty
komutunu kullandım. Bunun dışında yapmam gereken bir şey var mı?