Ubuntu Geç Açılıyor

[zumrut012]

Bilgisayar açılışta çok yavaş açılıyor (3 dakika felan bekliyorum neredeyse) birde varmı bilmiyorumda hoşgeldiniz çıkmıyor

dmesg > çıktı ise böyle

Kod Seç Genişlet

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-37-generic (buildd@kapok) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #64-Ubuntu SMP Mon Sep 22 21:28:38 UTC 2014 (Ubuntu 3.13.0-37.64-generic 3.13.11.7)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic root=UUID=c7c55f17-e721-44d5-9442-cbe9bb5d0456 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000af63efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000af63f000-0x00000000af6befff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000af6bf000-0x00000000af7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000af7bf000-0x00000000af7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000af7ff000-0x00000000af7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000af800000-0x00000000afffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: TOSHIBA SATELLITE L750/Base Board Product Name, BIOS 3.60 06/26/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x14f800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0AF800000 mask FFF800000 uncachable
[    0.000000]   3 base 0B0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   5 base 100000000 mask FC0000000 write-back
[    0.000000]   6 base 140000000 mask FF0000000 write-back
[    0.000000]   7 base 14F800000 mask FFF800000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xaf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[    0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[    0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x14f600000-0x14f7fffff]
[    0.000000]  [mem 0x14f600000-0x14f7fffff] page 2M
[    0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x14c000000-0x14f5fffff]
[    0.000000]  [mem 0x14c000000-0x14f5fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
[    0.000000]  [mem 0x100000000-0x14bffffff] page 2M
[    0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0xaf63efff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xaf5fffff] page 2M
[    0.000000]  [mem 0xaf600000-0xaf63efff] page 4k
[    0.000000] init_memory_mapping: [mem 0xaf7ff000-0xaf7fffff]
[    0.000000]  [mem 0xaf7ff000-0xaf7fffff] page 4k
[    0.000000] RAMDISK: [mem 0x35b5c000-0x36da5fff]
[    0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 TOSQCI)
[    0.000000] ACPI: XSDT 00000000af7fe120 000084 (v01 TOSQCI TOSQCI00 00000001      01000013)
[    0.000000] ACPI: FACP 00000000af7fc000 0000F4 (v04 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 00000000af7eb000 00D520 (v01 TOSQCI TOSQCI00 00000000 MSFT 01000013)
[    0.000000] ACPI: FACS 00000000af76d000 000040
[    0.000000] ACPI: ASF! 00000000af7fd000 0000A5 (v32 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: HPET 00000000af7fb000 000038 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 00000000af7fa000 00008C (v02 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 00000000af7f9000 00003C (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 00000000af7ea000 000176 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: WDAT 00000000af7e9000 000224 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 00000000af7e7000 001068 (v01 INSYDE INSYDE   00001000 MSFT 01000013)
[    0.000000] ACPI: BOOT 00000000af7e5000 000028 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: ASPT 00000000af7e2000 000034 (v07 TOSQCI TOSQCI00 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 00000000af7e1000 000845 (v01  PmRef  Cpu0Ist 00003000 INTL 20100121)
[    0.000000] ACPI: SSDT 00000000af7e0000 000996 (v01  PmRef    CpuPm 00003000 INTL 20100121)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f7fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x14f7fffff]
[    0.000000]   NODE_DATA [mem 0x14f7f8000-0x14f7fcfff]
[    0.000000]  [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ae00000-ffff88014edfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x14f7fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0xaf63efff]
[    0.000000]   node   0: [mem 0xaf7ff000-0xaf7fffff]
[    0.000000]   node   0: [mem 0x100000000-0x14f7fffff]
[    0.000000] On node 0 totalpages: 1043932
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11161 pages used for memmap
[    0.000000]   DMA32 zone: 714304 pages, LIFO batch:31
[    0.000000]   Normal zone: 5088 pages used for memmap
[    0.000000]   Normal zone: 325632 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf63f000-0xaf6befff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf6bf000-0xaf7befff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf7bf000-0xaf7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xafffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0xb0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88014f400000 s86400 r8192 d24192 u262144
[    0.000000] pcpu-alloc: s86400 r8192 d24192 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1027598
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic root=UUID=c7c55f17-e721-44d5-9442-cbe9bb5d0456 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4007828K/4175728K available (7375K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 167900K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] Offload RCU callbacks from all CPUs
[    0.000000] Offload RCU callbacks from CPUs: 0-7.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2394.694 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.38 BogoMIPS (lpj=9578776)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000032] Security Framework initialized
[    0.000051] AppArmor: AppArmor initialized
[    0.000052] Yama: becoming mindful.
[    0.000361] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001369] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001804] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.001811] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.002016] Initializing cgroup subsys memory
[    0.002023] Initializing cgroup subsys devices
[    0.002024] Initializing cgroup subsys freezer
[    0.002026] Initializing cgroup subsys blkio
[    0.002027] Initializing cgroup subsys perf_event
[    0.002029] Initializing cgroup subsys hugetlb
[    0.002051] CPU: Physical Processor ID: 0
[    0.002052] CPU: Processor Core ID: 0
[    0.002056] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.002056] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002059] mce: CPU supports 7 MCE banks
[    0.002068] CPU0: Thermal monitoring handled by SMI
[    0.002077] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.002077] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.002077] tlb_flushall_shift: 5
[    0.002203] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[    0.003679] ACPI: Core revision 20131115
[    0.009530] ACPI: All ACPI Tables successfully acquired
[    0.030741] ftrace: allocating 28541 entries in 112 pages
[    0.045569] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.085291] smpboot: CPU0: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
[    0.085299] TSC deadline timer enabled
[    0.085311] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.085318] ... version:                3
[    0.085319] ... bit width:              48
[    0.085320] ... generic registers:      4
[    0.085321] ... value mask:             0000ffffffffffff
[    0.085322] ... max period:             0000ffffffffffff
[    0.085323] ... fixed-purpose events:   3
[    0.085324] ... event mask:             000000070000000f
[    0.086872] x86: Booting SMP configuration:
[    0.097933] CPU1: Thermal monitoring handled by SMI
[    0.100111] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.111250] CPU2: Thermal monitoring handled by SMI
[    0.124487] CPU3: Thermal monitoring handled by SMI
[    0.086874] .... node  #0, CPUs:      #1 #2 #3
[    0.126601] x86: Booted up 1 node, 4 CPUs
[    0.126605] smpboot: Total of 4 processors activated (19157.55 BogoMIPS)
[    0.129830] devtmpfs: initialized
[    0.132819] EVM: security.selinux
[    0.132821] EVM: security.SMACK64
[    0.132822] EVM: security.ima
[    0.132823] EVM: security.capability
[    0.132866] PM: Registering ACPI NVS region [mem 0xaf6bf000-0xaf7befff] (1048576 bytes)
[    0.133650] pinctrl core: initialized pinctrl subsystem
[    0.133703] regulator-dummy: no parameters
[    0.133733] RTC time: 22:46:35, date: 10/14/14
[    0.133764] NET: Registered protocol family 16
[    0.133856] cpuidle: using governor ladder
[    0.133857] cpuidle: using governor menu
[    0.133891] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.133892] ACPI: bus type PCI registered
[    0.133894] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.133952] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.133954] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.151993] PCI: Using configuration type 1 for base access
[    0.152132] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.152133] mtrr: probably your BIOS does not setup all CPUs.
[    0.152134] mtrr: corrected configuration.
[    0.152828] bio: create slab <bio-0> at 0
[    0.152965] ACPI: Added _OSI(Module Device)
[    0.152966] ACPI: Added _OSI(Processor Device)
[    0.152967] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.152969] ACPI: Added _OSI(Processor Aggregator Device)
[    0.164106] ACPI: Executed 1 blocks of module-level executable AML code
[    0.166864] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.171044] ACPI: SSDT 00000000af670798 000727 (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
[    0.171413] ACPI: Dynamic OEM Table Load:
[    0.171415] ACPI: SSDT           (null) 000727 (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
[    0.174937] ACPI: SSDT 00000000af671a98 000303 (v01  PmRef    ApIst 00003000 INTL 20100121)
[    0.175328] ACPI: Dynamic OEM Table Load:
[    0.175330] ACPI: SSDT           (null) 000303 (v01  PmRef    ApIst 00003000 INTL 20100121)
[    0.178823] ACPI: SSDT 00000000af66fd98 000119 (v01  PmRef    ApCst 00003000 INTL 20100121)
[    0.179185] ACPI: Dynamic OEM Table Load:
[    0.179187] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20100121)
[    0.183386] ACPI: Interpreter enabled
[    0.183392] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.183396] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.183409] ACPI: (supports S0 S3 S4 S5)
[    0.183411] ACPI: Using IOAPIC for interrupt routing
[    0.183435] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.183679] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.188817] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.188822] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.188852] \_SB_.PCI0:_OSC invalid UUID
[    0.188854] _OSC request data:1 1f 0
[    0.188857] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.189468] PCI host bridge to bus 0000:00
[    0.189471] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.189473] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.189475] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.189477] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.189478] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff]
[    0.189486] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.189567] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.189597] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.189634] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.189691] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.189721] pci 0000:00:16.0: reg 0x10: [mem 0xc3404000-0xc340400f 64bit]
[    0.189799] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.189878] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.190152] pci 0000:00:1a.0: reg 0x10: [mem 0xc340a000-0xc340a3ff]
[    0.191688] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.191745] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.191780] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.191797] pci 0000:00:1b.0: reg 0x10: [mem 0xc3400000-0xc3403fff 64bit]
[    0.191865] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.191909] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.191942] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.192073] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.192126] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.192161] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.192291] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.192345] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.192378] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[    0.192457] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.192501] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.192530] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[    0.192608] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.192653] pci 0000:00:1c.6: System wakeup disabled by ACPI
[    0.192686] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.192951] pci 0000:00:1d.0: reg 0x10: [mem 0xc3409000-0xc34093ff]
[    0.194488] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.194543] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.194576] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.194745] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.194766] pci 0000:00:1f.2: reg 0x10: [io  0x4060-0x4067]
[    0.194774] pci 0000:00:1f.2: reg 0x14: [io  0x40b4-0x40b7]
[    0.194784] pci 0000:00:1f.2: reg 0x18: [io  0x4040-0x4047]
[    0.194794] pci 0000:00:1f.2: reg 0x1c: [io  0x409c-0x409f]
[    0.194802] pci 0000:00:1f.2: reg 0x20: [io  0x4020-0x403f]
[    0.194811] pci 0000:00:1f.2: reg 0x24: [mem 0xc3408000-0xc34087ff]
[    0.194857] pci 0000:00:1f.2: PME# supported from D3hot
[    0.194921] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.194937] pci 0000:00:1f.3: reg 0x10: [mem 0xc3406000-0xc34060ff 64bit]
[    0.194958] pci 0000:00:1f.3: reg 0x20: [io  0x4000-0x401f]
[    0.195085] pci 0000:01:00.0: [10de:1050] type 00 class 0x030000
[    0.195098] pci 0000:01:00.0: reg 0x10: [mem 0xc2000000-0xc2ffffff]
[    0.195113] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.195127] pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[    0.195137] pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.195147] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.195244] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
[    0.195257] pci 0000:01:00.1: reg 0x10: [mem 0xc3000000-0xc3003fff]
[    0.205878] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.205886] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.205893] pci 0000:00:01.0:   bridge window [mem 0xc2000000-0xc30fffff]
[    0.205903] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.206021] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.206202] pci 0000:08:00.0: [1033:0194] type 00 class 0x0c0330
[    0.206230] pci 0000:08:00.0: reg 0x10: [mem 0xc3300000-0xc3301fff 64bit]
[    0.206365] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[    0.206401] pci 0000:08:00.0: System wakeup disabled by ACPI
[    0.213938] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.213953] pci 0000:00:1c.1:   bridge window [mem 0xc3300000-0xc33fffff]
[    0.214064] pci 0000:09:00.0: [168c:002b] type 00 class 0x028000
[    0.214091] pci 0000:09:00.0: reg 0x10: [mem 0xc3200000-0xc320ffff 64bit]
[    0.214222] pci 0000:09:00.0: supports D1
[    0.214224] pci 0000:09:00.0: PME# supported from D0 D1 D3hot
[    0.214257] pci 0000:09:00.0: System wakeup disabled by ACPI
[    0.221900] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.221915] pci 0000:00:1c.5:   bridge window [mem 0xc3200000-0xc32fffff]
[    0.222110] pci 0000:0a:00.0: [1969:2062] type 00 class 0x020000
[    0.222203] pci 0000:0a:00.0: reg 0x10: [mem 0xc3100000-0xc313ffff 64bit]
[    0.222247] pci 0000:0a:00.0: reg 0x18: [io  0x2000-0x207f]
[    0.222721] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.222817] pci 0000:0a:00.0: System wakeup disabled by ACPI
[    0.233947] pci 0000:00:1c.6: PCI bridge to [bus 0a]
[    0.233957] pci 0000:00:1c.6:   bridge window [io  0x2000-0x2fff]
[    0.233967] pci 0000:00:1c.6:   bridge window [mem 0xc3100000-0xc31fffff]
[    0.234513] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.234562] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.234611] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.234656] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.234704] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.234751] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.234799] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.234846] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.235160] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.235167] ACPI: \_SB_.PCI0: notify handler is installed
[    0.235227] Found 1 acpi root devices
[    0.235295] ACPI : EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
[    0.235390] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.235392] vgaarb: loaded
[    0.235393] vgaarb: bridge control possible 0000:01:00.0
[    0.235537] SCSI subsystem initialized
[    0.235583] libata version 3.00 loaded.
[    0.235615] ACPI: bus type USB registered
[    0.235630] usbcore: registered new interface driver usbfs
[    0.235638] usbcore: registered new interface driver hub
[    0.235661] usbcore: registered new device driver usb
[    0.235754] PCI: Using ACPI for IRQ routing
[    0.242107] PCI: pci_cache_line_size set to 64 bytes
[    0.242221] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.242223] e820: reserve RAM buffer [mem 0xaf63f000-0xafffffff]
[    0.242224] e820: reserve RAM buffer [mem 0xaf800000-0xafffffff]
[    0.242225] e820: reserve RAM buffer [mem 0x14f800000-0x14fffffff]
[    0.242306] NetLabel: Initializing
[    0.242307] NetLabel:  domain hash size = 128
[    0.242308] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.242321] NetLabel:  unlabeled traffic allowed by default
[    0.242378] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.242384] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.244415] Switched to clocksource hpet
[    0.248641] AppArmor: AppArmor Filesystem Enabled
[    0.248665] pnp: PnP ACPI init
[    0.248677] ACPI: bus type PNP registered
[    0.248747] pnp 00:00: [dma 4]
[    0.248769] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.248787] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.248869] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.248898] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.248942] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.248944] system 00:04: [io  0x1004-0x1013] has been reserved
[    0.248946] system 00:04: [io  0xffff] has been reserved
[    0.248948] system 00:04: [io  0xffff] has been reserved
[    0.248950] system 00:04: [io  0x0400-0x0453] could not be reserved
[    0.248952] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.248954] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.248956] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.248958] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.248981] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.249014] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.249017] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.249061] pnp 00:07: Plug and Play ACPI device, IDs TOS1102 PNP0303 (active)
[    0.249085] pnp 00:08: Plug and Play ACPI device, IDs TOS0220 PNP0f13 (active)
[    0.249194] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.249196] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.249198] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.249200] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.249202] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.249204] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.249206] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.249208] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.249210] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.249211] system 00:09: [mem 0xc3500000-0xc3500fff] has been reserved
[    0.249214] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.249423] system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved
[    0.249425] system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved
[    0.249427] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.249496] pnp: PnP ACPI: found 11 devices
[    0.249497] ACPI: bus type PNP unregistered
[    0.255819] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[    0.255868] pci 0000:01:00.0: BAR 6: assigned [mem 0xc3080000-0xc30fffff pref]
[    0.255871] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.255874] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.255876] pci 0000:00:01.0:   bridge window [mem 0xc2000000-0xc30fffff]
[    0.255879] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.255883] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.255900] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.255907] pci 0000:00:1c.1:   bridge window [mem 0xc3300000-0xc33fffff]
[    0.255919] pci 0000:00:1c.5: PCI bridge to [bus 09]
[    0.255923] pci 0000:00:1c.5:   bridge window [mem 0xc3200000-0xc32fffff]
[    0.255932] pci 0000:00:1c.6: PCI bridge to [bus 0a]
[    0.255935] pci 0000:00:1c.6:   bridge window [io  0x2000-0x2fff]
[    0.255940] pci 0000:00:1c.6:   bridge window [mem 0xc3100000-0xc31fffff]
[    0.255950] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.255952] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.255953] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.255955] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff]
[    0.255957] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.255958] pci_bus 0000:01: resource 1 [mem 0xc2000000-0xc30fffff]
[    0.255960] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.255962] pci_bus 0000:08: resource 1 [mem 0xc3300000-0xc33fffff]
[    0.255964] pci_bus 0000:09: resource 1 [mem 0xc3200000-0xc32fffff]
[    0.255966] pci_bus 0000:0a: resource 0 [io  0x2000-0x2fff]
[    0.255967] pci_bus 0000:0a: resource 1 [mem 0xc3100000-0xc31fffff]
[    0.255996] NET: Registered protocol family 2
[    0.256181] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.256264] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.256359] TCP: Hash tables configured (established 32768 bind 32768)
[    0.256378] TCP: reno registered
[    0.256385] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.256403] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.256471] NET: Registered protocol family 1
[    0.288630] pci 0000:01:00.0: Boot video device
[    0.300346] PCI: CLS 64 bytes, default 64
[    0.300393] Trying to unpack rootfs image as initramfs...
[    0.598405] Freeing initrd memory: 18728K (ffff880035b5c000 - ffff880036da6000)
[    0.598410] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.598413] software IO TLB [mem 0xab63f000-0xaf63f000] (64MB) mapped at [ffff8800ab63f000-ffff8800af63efff]
[    0.598486] Simple Boot Flag at 0x44 set to 0x1
[    0.598654] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[    0.598661] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[    0.598665] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[    0.598671] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[    0.598728] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.598730] Scanning for low memory corruption every 60 seconds
[    0.599003] Initialise system trusted keyring
[    0.599046] audit: initializing netlink socket (disabled)
[    0.599055] type=2000 audit(1413326795.580:1): initialized
[    0.624999] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.625918] zbud: loaded
[    0.626053] VFS: Disk quotas dquot_6.5.2
[    0.626090] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.626464] fuse init (API version 7.22)
[    0.626528] msgmni has been set to 7864
[    0.626573] Key type big_key registered
[    0.626988] Key type asymmetric registered
[    0.626990] Asymmetric key parser 'x509' registered
[    0.627016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.627050] io scheduler noop registered
[    0.627051] io scheduler deadline registered (default)
[    0.627071] io scheduler cfq registered
[    0.627234] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.627560] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.627572] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.627602] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    0.627603] vesafb: scrolling: redraw
[    0.627605] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.627706] vesafb: framebuffer at 0xc1000000, mapped to 0xffffc90010780000, using 1216k, total 1216k
[    0.643682] Console: switching to colour frame buffer device 80x30
[    0.659610] fb0: VESA VGA frame buffer device
[    0.659625] intel_idle: MWAIT substates: 0x21120
[    0.659626] intel_idle: v0.4 model 0x2A
[    0.659627] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.659717] ipmi message handler version 39.2
[    0.659778] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.659832] ACPI: AC Adapter [ACAD] (on-line)
[    0.659939] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.659943] ACPI: Power Button [PWRB]
[    0.659974] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.660002] ACPI: Lid Switch [LID]
[    0.660028] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.660031] ACPI: Power Button [PWRF]
[    0.660197] GHES: HEST is not enabled!
[    0.660271] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.661615] Linux agpgart interface v0.103
[    0.662786] brd: module loaded
[    0.663412] loop: module loaded
[    0.663696] libphy: Fixed MDIO Bus: probed
[    0.663762] tun: Universal TUN/TAP device driver, 1.6
[    0.663764] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.663808] PPP generic driver version 2.4.2
[    0.663844] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.663847] ehci-pci: EHCI PCI platform driver
[    0.663952] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.663957] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.663970] ehci-pci 0000:00:1a.0: debug port 2
[    0.667874] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.667896] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc340a000
[    0.676793] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.676832] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.676834] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.676835] usb usb1: Product: EHCI Host Controller
[    0.676837] usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.676838] usb usb1: SerialNumber: 0000:00:1a.0
[    0.676978] hub 1-0:1.0: USB hub found
[    0.676985] hub 1-0:1.0: 2 ports detected
[    0.677142] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.677147] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.677158] ehci-pci 0000:00:1d.0: debug port 2
[    0.681069] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.681082] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc3409000
[    0.692840] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.692928] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.692930] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.692931] usb usb2: Product: EHCI Host Controller
[    0.692933] usb usb2: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.692934] usb usb2: SerialNumber: 0000:00:1d.0
[    0.693071] hub 2-0:1.0: USB hub found
[    0.693079] hub 2-0:1.0: 2 ports detected
[    0.693158] ehci-platform: EHCI generic platform driver
[    0.693165] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.693166] ohci-pci: OHCI PCI platform driver
[    0.693173] ohci-platform: OHCI generic platform driver
[    0.693179] uhci_hcd: USB Universal Host Controller Interface driver
[    0.693246] xhci_hcd 0000:08:00.0: xHCI Host Controller
[    0.693251] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
[    0.693436] xhci_hcd 0000:08:00.0: irq 41 for MSI/MSI-X
[    0.693441] xhci_hcd 0000:08:00.0: irq 42 for MSI/MSI-X
[    0.693446] xhci_hcd 0000:08:00.0: irq 43 for MSI/MSI-X
[    0.693451] xhci_hcd 0000:08:00.0: irq 44 for MSI/MSI-X
[    0.693456] xhci_hcd 0000:08:00.0: irq 45 for MSI/MSI-X
[    0.693572] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.693574] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.693575] usb usb3: Product: xHCI Host Controller
[    0.693577] usb usb3: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.693578] usb usb3: SerialNumber: 0000:08:00.0
[    0.693759] hub 3-0:1.0: USB hub found
[    0.693771] hub 3-0:1.0: 2 ports detected
[    0.693833] xhci_hcd 0000:08:00.0: xHCI Host Controller
[    0.693836] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4
[    0.696860] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.696862] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.696863] usb usb4: Product: xHCI Host Controller
[    0.696865] usb usb4: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.696866] usb usb4: SerialNumber: 0000:08:00.0
[    0.697053] hub 4-0:1.0: USB hub found
[    0.697064] hub 4-0:1.0: 2 ports detected
[    0.705104] i8042: PNP: PS/2 Controller [PNP0303:PS2E,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.713679] i8042: Detected active multiplexing controller, rev 1.1
[    0.719159] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.719165] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.719187] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.719201] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.719215] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.719485] mousedev: PS/2 mouse device common for all mice
[    0.719843] rtc_cmos 00:05: RTC can wake from S4
[    0.720001] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.720034] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.720099] device-mapper: uevent: version 1.0.3
[    0.720178] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.720185] ledtrig-cpu: registered to indicate activity on CPUs
[    0.720276] TCP: cubic registered
[    0.720345] NET: Registered protocol family 10
[    0.720495] NET: Registered protocol family 17
[    0.720505] Key type dns_resolver registered
[    0.720780] Loading compiled-in X.509 certificates
[    0.721711] Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
[    0.721724] registered taskstats version 1
[    0.723651] Key type trusted registered
[    0.725138] Key type encrypted registered
[    0.726591] AppArmor: AppArmor sha1 policy hashing enabled
[    0.726595] IMA: No TPM chip found, activating TPM-bypass!
[    0.726975] regulator-dummy: disabling
[    0.727024]   Magic number: 2:647:805
[    0.727111] rtc_cmos 00:05: setting system clock to 2014-10-14 22:46:36 UTC (1413326796)
[    0.727707] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.727708] EDD information not available.
[    0.727740] PM: Hibernation image not present or could not be loaded.
[    0.747214] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.989274] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.049369] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.049376] ACPI: Battery Slot [BAT1] (battery present)
[    1.050522] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    1.050524] Write protecting the kernel read-only data: 12288k
[    1.052209] Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
[    1.053613] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    1.063445] systemd-udevd[123]: starting version 204
[    1.085524] ahci 0000:00:1f.2: version 3.0
[    1.085661] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[    1.085693] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.101184] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x19 impl SATA mode
[    1.101189] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[    1.114877] atl1c 0000:0a:00.0: version 1.0.1.1-NAPI
[    1.121598] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.121601] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.121881] hub 1-1:1.0: USB hub found
[    1.121942] scsi0 : ahci
[    1.121953] hub 1-1:1.0: 6 ports detected
[    1.122062] scsi1 : ahci
[    1.122134] scsi2 : ahci
[    1.122190] scsi3 : ahci
[    1.122246] scsi4 : ahci
[    1.122312] scsi5 : ahci
[    1.122348] ata1: SATA max UDMA/133 abar m2048@0xc3408000 port 0xc3408100 irq 46
[    1.122350] ata2: DUMMY
[    1.122351] ata3: DUMMY
[    1.122353] ata4: SATA max UDMA/133 abar m2048@0xc3408000 port 0xc3408280 irq 46
[    1.122356] ata5: SATA max UDMA/133 abar m2048@0xc3408000 port 0xc3408300 irq 46
[    1.122357] ata6: DUMMY
[    1.233484] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.366070] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.366081] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.366332] hub 2-1:1.0: USB hub found
[    1.366434] hub 2-1:1.0: 6 ports detected
[    1.437640] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    1.441552] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.486022] ata1.00: ATA-8: TOSHIBA MK6475GSX, GT001M, max UDMA/100
[    1.486025] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.487033] ata1.00: configured for UDMA/100
[    1.487246] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK6475GS GT00 PQ: 0 ANSI: 5
[    1.487377] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    1.487404] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.487437] sd 0:0:0:0: [sda] Write Protect is off
[    1.487440] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.487485] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.531450] usb 1-1.1: New USB device found, idVendor=09da, idProduct=054f
[    1.531452] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.531454] usb 1-1.1: Product: USB Device
[    1.531455] usb 1-1.1: Manufacturer: A4TECH
[    1.534396] hidraw: raw HID events driver (C) Jiri Kosina
[    1.538671] usbcore: registered new interface driver usbhid
[    1.538674] usbhid: USB HID core driver
[    1.540667] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input10
[    1.540797] hid-generic 0003:09DA:054F.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1a.0-1.1/input0
[    1.541038] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input11
[    1.541142] hid-generic 0003:09DA:054F.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1a.0-1.1/input1
[    1.575399]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    1.576244] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.597599] tsc: Refined TSC clocksource calibration: 2394.560 MHz
[    1.602068] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    1.723407] usb 1-1.4: New USB device found, idVendor=04f2, idProduct=b28e
[    1.723416] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.723422] usb 1-1.4: Product: TOSHIBA Web Camera
[    1.723426] usb 1-1.4: Manufacturer: Sonix Technology Co., Ltd.
[    1.797925] usb 1-1.6: new full-speed USB device number 5 using ehci-pci
[    1.805855] ata4: SATA link down (SStatus 0 SControl 300)
[    1.891339] usb 1-1.6: New USB device found, idVendor=0930, idProduct=0215
[    1.891342] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.962090] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[    2.045570] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762
[    2.067463] usb 2-1.5: New USB device found, idVendor=0bda, idProduct=0138
[    2.067467] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.067469] usb 2-1.5: Product: USB2.0-CRW
[    2.067470] usb 2-1.5: Manufacturer: Generic
[    2.067471] usb 2-1.5: SerialNumber: 20090516388200000
[    2.076320] usbcore: registered new interface driver usb-storage
[    2.077407] ums-realtek 2-1.5:1.0: USB Mass Storage device detected
[    2.096955] scsi6 : usb-storage 2-1.5:1.0
[    2.097037] usbcore: registered new interface driver ums-realtek
[    2.099938] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[    2.126143] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.128896] ata5.00: ATAPI: HL-DT-STDVDRAM GT30N, TD03, max UDMA/100
[    2.131870] ata5.00: configured for UDMA/100
[    2.134940] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT30N     TD03 PQ: 0 ANSI: 5
[    2.139304] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.139314] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.139516] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.139604] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    2.220699] usb 2-1.5: USB disconnect, device number 3
[    2.598717] Switched to clocksource tsc
[    2.688315] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    3.352384] random: init urandom read with 127 bits of entropy available
[    3.383187] random: nonblocking pool is initialized
[   16.092416] Adding 4173820k swap on /dev/sda6.  Priority:-1 extents:1 across:4173820k FS
[   16.136466] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.240941] systemd-udevd[306]: starting version 204
[   16.312587] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
[   16.312635] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   16.338559] lp: driver loaded but no devices found
[   16.342969] ppdev: user-space parallel port driver
[   16.470395] acpi device:31: registered as cooling_device4
[   16.470467] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/LNXVIDEO:00/input/input14
[   16.531571] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   16.688601] wmi: Mapper loaded
[   16.692159] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[   16.692262] input: Toshiba input device as /devices/virtual/input/input15
[   16.701120] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[   16.702916] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler
[   16.702967] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[   16.714776] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   16.714784] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.714788] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   16.714793] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.714794] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   16.714798] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.714799] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   16.714803] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.714804] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   16.717872] cfg80211: Calling CRDA to update world regulatory domain
[   16.732732] Bluetooth: Core ver 2.17
[   16.732748] NET: Registered protocol family 31
[   16.732750] Bluetooth: HCI device and connection manager initialized
[   16.732758] Bluetooth: HCI socket layer initialized
[   16.732761] Bluetooth: L2CAP socket layer initialized
[   16.732765] Bluetooth: SCO socket layer initialized
[   16.736810] usbcore: registered new interface driver btusb
[   16.808420] ath: phy0: ASPM enabled: 0x42
[   16.808425] ath: EEPROM regdomain: 0x65
[   16.808426] ath: EEPROM indicates we should expect a direct regpair map
[   16.808429] ath: Country alpha2 being used: 00
[   16.808430] ath: Regpair used: 0x65
[   16.819559] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   16.819839] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900108e0000, irq=17
[   16.839592] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[   16.866282] hda_codec: CX20585: BIOS auto-probing.
[   16.866745] autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[   16.866748]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.866750]    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[   16.866751]    mono: mono_out=0x0
[   16.866753]    inputs:
[   16.866755]      Internal Mic=0x23
[   16.866756]      Mic=0x1a
[   16.867614] hda_codec: Enable sync_write for stable communication
[   16.869249] [drm] Initialized drm 1.1.0 20060810
[   16.869724] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   16.869800] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   16.870039] hda_intel: Disabling MSI
[   16.870044] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   16.870067] hda-intel 0000:01:00.1: Disabling 64bit DMA
[   16.872299] Linux video capture interface: v2.00
[   16.879178] type=1400 audit(1413316012.635:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=406 comm="apparmor_parser"
[   16.879184] type=1400 audit(1413316012.635:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=406 comm="apparmor_parser"
[   16.879188] type=1400 audit(1413316012.635:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=406 comm="apparmor_parser"
[   16.879307] type=1400 audit(1413316012.635:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=458 comm="apparmor_parser"
[   16.879313] type=1400 audit(1413316012.635:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=458 comm="apparmor_parser"
[   16.879317] type=1400 audit(1413316012.635:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=458 comm="apparmor_parser"
[   16.879577] type=1400 audit(1413316012.635:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=406 comm="apparmor_parser"
[   16.879581] type=1400 audit(1413316012.635:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=406 comm="apparmor_parser"
[   16.879788] type=1400 audit(1413316012.635:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=406 comm="apparmor_parser"
[   16.879796] type=1400 audit(1413316012.635:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=458 comm="apparmor_parser"
[   16.883675] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera (04f2:b28e)
[   16.889809] hda-intel 0000:01:00.1: Enable delay in RIRB handling
[   16.897105] input: TOSHIBA Web Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input18
[   16.897197] usbcore: registered new interface driver uvcvideo
[   16.897199] USB Video Class driver (1.1.1)
[   16.971927] intel_rapl: domain uncore energy ctr 0:0 not working, skip
[   17.019536] cfg80211: World regulatory domain updated:
[   17.019538] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   17.019540] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.019541] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.019542] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   17.019544] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.019545] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.076492] ACPI Warning: \_SB_.PCI0.PEG0.VGA_._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
[   17.076523] ACPI Warning: \_SB_.PCI0.PEG0.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   17.111797] usbcore: registered new interface driver ath3k
[   17.176309] init: failsafe main process (547) killed by TERM signal
[   17.211068] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[   17.211472] checking generic (c1000000 130000) vs hw (b0000000 10000000)
[   17.211475] checking generic (c1000000 130000) vs hw (c0000000 2000000)
[   17.211477] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[   17.211506] Console: switching to colour dummy device 80x25
[   17.212040] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0d9100a1
[   17.212044] nouveau  [  DEVICE][0000:01:00.0] Chipset: GF119 (NVD9)
[   17.212046] nouveau  [  DEVICE][0000:01:00.0] Family : NVD0
[   17.215386] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[   17.277701] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[   17.277705] nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
[   17.277792] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[   17.277795] nouveau  [   VBIOS][0000:01:00.0] version 75.19.32.00.01
[   17.278225] nouveau 0000:01:00.0: irq 49 for MSI/MSI-X
[   17.278235] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[   17.278272] nouveau W[     PFB][0000:01:00.0][0x00000000][ffff8801459a4800] reclocking of this ram type unsupported
[   17.278274] nouveau  [     PFB][0000:01:00.0] RAM type: DDR3
[   17.278275] nouveau  [     PFB][0000:01:00.0] RAM size: 1024 MiB
[   17.278277] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
[   17.281853] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 850000uv
[   17.305753] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
[   17.305761] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[   17.305766] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[   17.305795] nouveau  [     CLK][0000:01:00.0] 07: core 270 MHz memory 405 MHz
[   17.305797] nouveau  [     CLK][0000:01:00.0] 0f: core 740 MHz memory 800 MHz
[   17.305945] nouveau  [     CLK][0000:01:00.0] --: core 270 MHz memory 405 MHz
[   17.309428] [TTM] Zone  kernel: Available graphics memory: 2014710 kiB
[   17.309431] [TTM] Initializing pool allocator
[   17.309434] [TTM] Initializing DMA pool allocator
[   17.309441] nouveau  [     DRM] VRAM: 1024 MiB
[   17.309442] nouveau  [     DRM] GART: 1048576 MiB
[   17.309446] nouveau  [     DRM] TMDS table version 2.0
[   17.309447] nouveau  [     DRM] DCB version 4.0
[   17.309449] nouveau  [     DRM] DCB outp 00: 01000323 00010034
[   17.309451] nouveau  [     DRM] DCB outp 01: 02014300 00000000
[   17.309452] nouveau  [     DRM] DCB outp 02: 02021362 00020010
[   17.309453] nouveau  [     DRM] DCB conn 00: 00000340
[   17.309455] nouveau  [     DRM] DCB conn 01: 00001061
[   17.309456] nouveau  [     DRM] DCB conn 02: 00000147
[   17.309458] nouveau  [     DRM] DCB conn 03: 00202346
[   17.309459] nouveau  [     DRM] DCB conn 04: 00000400
[   17.309460] nouveau  [     DRM] DCB conn 05: 00000210
[   17.309461] nouveau  [     DRM] DCB conn 06: 00000211
[   17.309462] nouveau  [     DRM] DCB conn 07: 00000213
[   17.310258] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   17.310260] [drm] No driver support for vblank timestamp query.
[   17.310263] nouveau  [     DRM] ACPI backlight interface available, not registering our own
[   17.316076] nouveau  [     DRM] MM: using COPY0 for buffer copies
[   17.323240] usb 1-1.6: USB disconnect, device number 5
[   17.391586] nouveau  [     DRM] allocated 1366x768 fb: 0x60000, bo ffff88009d808800
[   17.391651] fbcon: nouveaufb (fb0) is primary device
[   17.427653] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.427654] Bluetooth: BNEP filters: protocol multicast
[   17.427663] Bluetooth: BNEP socket layer initialized
[   17.430491] Bluetooth: RFCOMM TTY layer initialized
[   17.430498] Bluetooth: RFCOMM socket layer initialized
[   17.430503] Bluetooth: RFCOMM ver 1.11
[   17.614892] init: avahi-cups-reload main process (753) terminated with status 1
[   17.779378] usb 1-1.6: new full-speed USB device number 6 using ehci-pci
[   17.872204] usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=3005
[   17.872205] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   18.128579] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.135219] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.152991] atl1c 0000:0a:00.0: irq 50 for MSI/MSI-X
[   18.170414] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.178514] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.201620] Console: switching to colour frame buffer device 170x48
[   18.202696] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[   18.202698] nouveau 0000:01:00.0: registered panic notifier
[   18.202702] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[   19.093481] wlan0: authenticate with 4c:9e:ff:50:97:e4
[   19.109372] wlan0: send auth to 4c:9e:ff:50:97:e4 (try 1/3)
[   19.112122] wlan0: authenticated
[   19.112474] wlan0: associate with 4c:9e:ff:50:97:e4 (try 1/3)
[   19.118646] wlan0: RX AssocResp from 4c:9e:ff:50:97:e4 (capab=0x411 status=0 aid=3)
[   19.118727] wlan0: associated
[   19.118734] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   25.104648] init: plymouth-upstart-bridge main process ended, respawning
[   25.110886] init: plymouth-upstart-bridge main process (1294) terminated with status 1
[   25.110904] init: plymouth-upstart-bridge main process ended, respawning
[ 4691.060160] systemd-hostnamed[2887]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!

[Ozmo]

Kod Seç Genişlet

sudo apt-get install bootchart

bunu kur ubuntuyu yeniden başlat ve /var/log/bootchart içindeki dosyaları bir yere upload et ve burada paylaş sonra programı kaldır

Kod Seç Genişlet

sudo apt-get purge bootchart

[zumrut012]

bu direk bootchart dosyası içindeki resim


bunlarda upload linkleri
mahmut-SATELLITE-L750-trusty-20141015-1.png -  563 KB
mahmut-SATELLITE-L750-trusty-20141015-1.tgz -  10.8 MB

[if]

Buradaki görüntü okunmuyor. Eklediğiniz dosyaları indiremiyorum.

[zumrut012]

Evet görüntüyü yükledikten sonra bende okuyamadım fakat dosyaları ben indirebiliyorum.

Upload edeceğim bir site önerebilirmisiniz peki

[if]

Yukarıdaki görüntüyü istediğiniz bir siteye yükleyin yeter.

[zumrut012]

[if]

Kod Seç Genişlet

sudo sed -i 's/NoDisplay=true/NoDisplay=false/g' /etc/xdg/autostart/*.desktop komutunu yürütün. Başlangıç Uygulamalarını açın; Bunlardan gnome-settings-daemon.desktop, gsettings-data-convert.desktop, nautilus-autostart.desktop, nm-applet.desktop, polkit-gnome-authentication-agent-1.desktop ve user-dirs-update-gtk.desktop olanları kapatmayın. Geri kalanını kapatabilirsiniz.

Çekirdek önyükleme seçeneklerinden[1] ipv6.disable=1 kullanarak sistemi yeniden başlatın.

[1] http://wiki.ubuntu-tr.net/index.php?title=%C3%87ekirdek_%C3%B6ny%C3%BCkleme_se%C3%A7enekleri

[zumrut012]

Kod Seç Genişlet

sudo sed -i 's/NoDisplay=true/NoDisplay=false/g' /etc/xdg/autostart/*.desktop komutunu yürütün. Başlangıç Uygulamalarını açın; Bunlardan gnome-settings-daemon.desktop, gsettings-data-convert.desktop, nautilus-autostart.desktop, nm-applet.desktop, polkit-gnome-authentication-agent-1.desktop ve user-dirs-update-gtk.desktop olanları kapatmayın. Geri kalanını kapatabilirsiniz.

Çekirdek önyükleme seçeneklerinden[1] ipv6.disable=1 kullanarak sistemi yeniden başlatın.

[1] http://wiki.ubuntu-tr.net/index.php?title=%C3%87ekirdek_%C3%B6ny%C3%BCkleme_se%C3%A7enekleri

Bu dediklerinizi yaptım ama yine geç açılıyor.

[if]

Konu aklımda fakat sorunu irdelemek için enerjim kalmadı şu an. Unutmamam için konuya ileti geçin.

[bytan]

Yeni bir kullanıcı oluşturup açtığında da açılışın bu kadar uzun sürüyor mu?

[heartsmagic]

dmesg ve bootchart çıktısında üç dakika kadar görünmüyor. Şu durumda ben de @bytan gibi yeni bir kullanıcıda durumun nasıl olduğunu merak ediyorum.

[zumrut012]

Yeni bir kullanıcı oluşturup açtığında da açılışın bu kadar uzun sürüyor mu?

dmesg ve bootchart çıktısında üç dakika kadar görünmüyor. Şu durumda ben de @bytan gibi yeni bir kullanıcıda durumun nasıl olduğunu merak ediyorum.

Yeni bir kullanıcı açtım kronometre ile tam 40 saniye sürdü açılması 4 - 5 defa denedim ortalama hepsinde 40 saniye sürüyor

[heartsmagic]

Bu 40 saniye sıfırdan 40 saniye mi yoksa giriş yöneticisinden sonra 40 saniye mi? Eğer sıfırdan ise çok fazla sürmüyor demektir.

[zumrut012]

Bu 40 saniye sıfırdan 40 saniye mi yoksa giriş yöneticisinden sonra 40 saniye mi? Eğer sıfırdan ise çok fazla sürmüyor demektir.

Evet artık sıfırdan 40 saniye sürüyor


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 24 Ekim 2014 - 13:48:28
Çok şükür bir problem kalmadı gibi ya çok sağolun

[heartsmagic]

Ben bir şey yaptırmadım, bir şey yaptırdıysa @if yaptırdı zaten Eğer onlar da işe yaramadıysa ne yaramıştır bilemiyorum ancak neleri kapatmıştın? Aralarında senin kurduğun bir uygulama var mıydı?

[zumrut012]

Ya bir kaç şey kurmuştum (tema değiştirmek için felan daha sonra sildim ama). Şuan normal açılmasına rağmen yinede bazı hatalar alıyorum. Mesela yeni açtığım kullanıcıyı kullanıyorum şuan ve diğerini sildim. Sisteme otomatik yani şifresiz girmeme rağmen ubuntu her açıldığında bir süre sonra masaüstünde sol üst tarafta lütfen şifrenizi girin diye bir pencere açılıyor birde ara sıra sistemde hata algılandı diye bir pencerede açılıyor.

[if]

Sistem sorunu saptancı penceresinden kurtulmak için:

Kod Seç Genişlet

sudo rm -f /var/crash/*

Şifreyi muhtemelen ağa bağlanmak içiin istiyordur. Süper (windows) tuşuna basın, şifre yazıp şifre yöneticisini (Seahorse) açın, öntanımlı anahtarı değiştir deyin ve boş bırakın.

[zumrut012]

@if geç yazıyorum biraz da çok teşekkür ederim size şuan problemim kalmadı benim sağolun