Creative 5.1 Soundblaster VX Sorunu

[if]

@krmz, sorunu çözmek için uyguladığın önerilerden herhangi birinde Pulseaudio ile ilgili bir şey var mıydı? Belki ayar dosyalarından birinde bir değişiklik yaptınız? 5.1 deyince 5+1 ses sistemlerinden biri değil bu değil mi?

Kod Seç Genişlet

alsamizer komutunu uygulayınca "card" kısmında ne yazıyor?

[krmz]

evet hocam değişik öneriler denedim pulseaudio ile ilgili şeyler de vardı belki değiştirmişimdir ama baştan beri böyle zaten yeni kurulum yaptım tek sorunum sesin arada gitmesi. alsamixer diye de komut verince kart: CA0106 yazıyor

5.1 deyince 5+1 ses sistemlerinden biri değil bu değil mi?

burayı pek anlayamadım. ses sistemim creative 5+1 ses sistemi

[if]

5 tane hoporlörün olduğu sistemlerden mi diye sormuştum.

Kod Seç Genişlet

dmesg çıktısını alayım.

https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1202094

[krmz]

verdiğiniz bağlantıya da baktım orada sesi kendi açtığından bahsetmiş. sunulan çözümü şimdi ben de denedim ama durum değişmedi maalesef

Kod Seç Genişlet

dogan@dogan-lin:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-37-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #64~precise1-Ubuntu SMP Wed Sep 24 21:37:11 UTC 2014 (Ubuntu 3.13.0-37.64~precise1-generic 3.13.11.7)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic root=UUID=52bc8381-4fbc-4002-9eee-b7519157c1e9 ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfeeffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfef2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfef3000-0x00000000cfefffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. M61PME-S2P/M61PME-S2P, BIOS F7b 04/28/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-CFFFF uncachable
[    0.000000]   D0000-D3FFF write-back
[    0.000000]   D4000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 base 0000CFF00000 mask FFFFFFF00000 uncachable
[    0.000000]   4 base 000100000000 mask FFFFE0000000 write-back
[    0.000000]   5 base 000120000000 mask FFFFF0000000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000130000000 aka 4864M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3327MB, range: 1MB, type UC
[    0.000000] reg 4, base: 4GB, range: 512MB, type WB
[    0.000000] reg 5, base: 4608MB, range: 256MB, type WB
[    0.000000] total RAM covered: 3327M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 2M num_reg: 4  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3327MB, range: 1MB, type UC
[    0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcfef0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f4c20-0x000f4c2f] mapped at [ffff8800000f4c20]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[    0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[    0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[    0.000000]  [mem 0x12fe00000-0x12fffffff] page 2M
[    0.000000] BRK [0x01fe8000, 0x01fe8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
[    0.000000]  [mem 0x12c000000-0x12fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
[    0.000000]  [mem 0x100000000-0x12bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xcfeeffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xcfdfffff] page 2M
[    0.000000]  [mem 0xcfe00000-0xcfeeffff] page 4k
[    0.000000] RAMDISK: [mem 0x34d3c000-0x36695fff]
[    0.000000] ACPI: RSDP 00000000000f65f0 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 00000000cfef3000 000038 (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
[    0.000000] ACPI: FACP 00000000cfef3040 000074 (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
[    0.000000] ACPI: DSDT 00000000cfef30c0 0045A5 (v01 GBT    NVDAACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 00000000cfef0000 000040
[    0.000000] ACPI: SSDT 00000000cfef7780 0007BA (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: HPET 00000000cfef7f40 000038 (v01 GBT    NVDAACPI 42302E31 NVDA 00000098)
[    0.000000] ACPI: MCFG 00000000cfef7f80 00003C (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
[    0.000000] ACPI: APIC 00000000cfef7680 0000D0 (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
[    0.000000]   NODE_DATA [mem 0x12fff9000-0x12fffdfff]
[    0.000000]  [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x12fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xcfeeffff]
[    0.000000]   node   0: [mem 0x100000000-0x12fffffff]
[    0.000000] On node 0 totalpages: 1048206
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13244 pages used for memmap
[    0.000000]   DMA32 zone: 847600 pages, LIFO batch:31
[    0.000000]   Normal zone: 3072 pages used for memmap
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[    0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfef0000-0xcfef2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfef3000-0xcfefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xe4000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88012fc00000 s86400 r8192 d24192 u262144
[    0.000000] pcpu-alloc: s86400 r8192 d24192 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031805
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic root=UUID=52bc8381-4fbc-4002-9eee-b7519157c1e9 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ c4000000 size 32 MB
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[    0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[    0.000000] Memory: 3952152K/4192824K available (7614K kernel code, 1138K rwdata, 3488K rodata, 1360K init, 1444K bss, 240672K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] Offload RCU callbacks from all CPUs
[    0.000000] Offload RCU callbacks from CPUs: 0-7.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2712.165 MHz processor
[    0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5424.33 BogoMIPS (lpj=10848660)
[    0.000009] pid_max: default: 32768 minimum: 301
[    0.000042] Security Framework initialized
[    0.000067] AppArmor: AppArmor initialized
[    0.000069] Yama: becoming mindful.
[    0.000445] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.002172] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002949] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.002959] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.003231] Initializing cgroup subsys memory
[    0.003239] Initializing cgroup subsys devices
[    0.003242] Initializing cgroup subsys freezer
[    0.003244] Initializing cgroup subsys blkio
[    0.003246] Initializing cgroup subsys perf_event
[    0.003248] Initializing cgroup subsys hugetlb
[    0.003273] tseg: 00cff00000
[    0.003277] CPU: Physical Processor ID: 0
[    0.003278] CPU: Processor Core ID: 0
[    0.003280] mce: CPU supports 6 MCE banks
[    0.003287] LVT offset 0 assigned for vector 0xf9
[    0.003293] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.003293] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[    0.003293] tlb_flushall_shift: 4
[    0.003395] Freeing SMP alternatives memory: 32K (ffffffff81e72000 - ffffffff81e7a000)
[    0.004237] ACPI: Core revision 20131115
[    0.006174] ACPI: All ACPI Tables successfully acquired
[    0.012979] ftrace: allocating 31494 entries in 124 pages
[    0.026603] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.066338] smpboot: CPU0: AMD Athlon(tm) 7750 Dual-Core Processor (fam: 10, model: 02, stepping: 03)
[    0.173798] Performance Events: AMD PMU driver.
[    0.173802] ... version:                0
[    0.173804] ... bit width:              48
[    0.173805] ... generic registers:      4
[    0.173806] ... value mask:             0000ffffffffffff
[    0.173807] ... max period:             00007fffffffffff
[    0.173808] ... fixed-purpose events:   0
[    0.173809] ... event mask:             000000000000000f
[    0.175533] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.175627] x86: Booting SMP configuration:
[    0.175629] .... node  #0, CPUs:      #1
[    0.188699] x86: Booted up 1 node, 2 CPUs
[    0.188701] smpboot: Total of 2 processors activated (10848.66 BogoMIPS)
[    0.190180] devtmpfs: initialized
[    0.194369] EVM: security.selinux
[    0.194370] EVM: security.SMACK64
[    0.194371] EVM: security.ima
[    0.194372] EVM: security.capability
[    0.194442] PM: Registering ACPI NVS region [mem 0xcfef0000-0xcfef2fff] (12288 bytes)
[    0.195452] pinctrl core: initialized pinctrl subsystem
[    0.195541] regulator-dummy: no parameters
[    0.195578] RTC time: 22:40:20, date: 10/18/14
[    0.195627] NET: Registered protocol family 16
[    0.195745] cpuidle: using governor ladder
[    0.195747] cpuidle: using governor menu
[    0.195751] node 0 link 0: io port [b000, ffff]
[    0.195753] TOM: 00000000d0000000 aka 3328M
[    0.195756] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[    0.195758] node 0 link 0: mmio [a0000, bffff]
[    0.195761] node 0 link 0: mmio [d0000000, dfffffff]
[    0.195763] node 0 link 0: mmio [e4000000, fe02ffff]
[    0.195764] node 0 link 0: mmio [e0000000, e02fffff] ==> [e0100000, e02fffff]
[    0.195766] TOM2: 0000000130000000 aka 4864M
[    0.195768] bus: [bus 00-02] on node 0 link 0
[    0.195770] bus: 00 [io  0x0000-0xffff]
[    0.195771] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.195772] bus: 00 [mem 0xd0000000-0xdfffffff]
[    0.195773] bus: 00 [mem 0xe0300000-0xffffffff]
[    0.195774] bus: 00 [mem 0xe0100000-0xe02fffff]
[    0.195775] bus: 00 [mem 0x130000000-0xfcffffffff]
[    0.195822] ACPI: bus type PCI registered
[    0.195824] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.195884] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.195887] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.195889] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
[    0.198123] PCI: Using configuration type 1 for base access
[    0.199091] bio: create slab <bio-0> at 0
[    0.199306] ACPI: Added _OSI(Module Device)
[    0.199309] ACPI: Added _OSI(Processor Device)
[    0.199310] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.199311] ACPI: Added _OSI(Processor Aggregator Device)
[    0.203217] ACPI: Interpreter enabled
[    0.203224] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.203228] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.203240] ACPI: (supports S0 S3 S4 S5)
[    0.203242] ACPI: Using IOAPIC for interrupt routing
[    0.203263] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.203358] ACPI: No dock devices found.
[    0.208846] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.208854] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.208859] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.208972] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.209118] PCI host bridge to bus 0000:00
[    0.209121] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.209123] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.209125] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.209126] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.209128] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.209130] pci_bus 0000:00: root bus resource [mem 0xe4000000-0xfebfffff]
[    0.209132] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
[    0.209154] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
[    0.209378] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
[    0.209468] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[    0.209479] pci 0000:00:01.1: reg 0x10: [io  0xfc00-0xfc3f]
[    0.209493] pci 0000:00:01.1: reg 0x20: [io  0x1c00-0x1c3f]
[    0.209498] pci 0000:00:01.1: reg 0x24: [io  0x1c40-0x1c7f]
[    0.209525] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.209596] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[    0.209680] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[    0.209688] pci 0000:00:02.0: reg 0x10: [mem 0xfe02f000-0xfe02ffff]
[    0.209720] pci 0000:00:02.0: supports D1 D2
[    0.209721] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.209766] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.209795] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[    0.209805] pci 0000:00:02.1: reg 0x10: [mem 0xfe02e000-0xfe02e0ff]
[    0.209849] pci 0000:00:02.1: supports D1 D2
[    0.209851] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.209904] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.209938] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[    0.210007] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.210034] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[    0.210045] pci 0000:00:05.0: reg 0x10: [mem 0xfe028000-0xfe02bfff]
[    0.210084] pci 0000:00:05.0: PME# supported from D3hot D3cold
[    0.210154] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[    0.210174] pci 0000:00:06.0: reg 0x20: [io  0xf000-0xf00f]
[    0.210254] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
[    0.210263] pci 0000:00:07.0: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[    0.210267] pci 0000:00:07.0: reg 0x14: [io  0xec00-0xec07]
[    0.210299] pci 0000:00:07.0: supports D1 D2
[    0.210301] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.210346] pci 0000:00:07.0: System wakeup disabled by ACPI
[    0.210374] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[    0.210382] pci 0000:00:08.0: reg 0x10: [io  0x09f0-0x09f7]
[    0.210386] pci 0000:00:08.0: reg 0x14: [io  0x0bf0-0x0bf3]
[    0.210389] pci 0000:00:08.0: reg 0x18: [io  0x0970-0x0977]
[    0.210393] pci 0000:00:08.0: reg 0x1c: [io  0x0b70-0x0b73]
[    0.210397] pci 0000:00:08.0: reg 0x20: [io  0xd800-0xd80f]
[    0.210401] pci 0000:00:08.0: reg 0x24: [mem 0xfe02c000-0xfe02cfff]
[    0.210484] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[    0.210509] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.210564] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.210602] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.210667] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.210734] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.210795] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.210860] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.210963] pci 0000:01:07.0: [1102:0007] type 00 class 0x040100
[    0.210975] pci 0000:01:07.0: reg 0x10: [io  0xcc00-0xcc1f]
[    0.211024] pci 0000:01:07.0: supports D1 D2
[    0.211066] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[    0.211069] pci 0000:00:04.0:   bridge window [io  0xc000-0xcfff]
[    0.211071] pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.211074] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff pref]
[    0.211076] pci 0000:00:04.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.211078] pci 0000:00:04.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.211080] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.211082] pci 0000:00:04.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.211083] pci 0000:00:04.0:   bridge window [mem 0xe4000000-0xfebfffff] (subtractive decode)
[    0.211085] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[    0.211119] pci 0000:02:00.0: [10de:0640] type 00 class 0x030000
[    0.211127] pci 0000:02:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[    0.211135] pci 0000:02:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.211144] pci 0000:02:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
[    0.211149] pci 0000:02:00.0: reg 0x24: [io  0xbc00-0xbc7f]
[    0.211155] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[    0.220747] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.220750] pci 0000:00:09.0:   bridge window [io  0xb000-0xbfff]
[    0.220752] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.220755] pci 0000:00:09.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.221149] ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15)
[    0.221193] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
[    0.221241] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.221284] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.221329] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.221375] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.221418] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.221461] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.221505] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.221549] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.221593] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[    0.221638] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[    0.221682] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[    0.221724] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.221769] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[    0.221821] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[    0.221871] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.221915] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[    0.221962] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.222039] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[    0.222105] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[    0.222177] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.222242] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[    0.222307] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[    0.222373] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[    0.222440] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[    0.222505] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[    0.222572] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled.
[    0.222637] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[    0.222701] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    0.222768] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[    0.222835] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[    0.222902] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[    0.222972] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[    0.223038] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[    0.223103] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.223170] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.223237] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[    0.223333] ACPI: \_SB_.PCI0: notify handler is installed
[    0.223364] Found 1 acpi root devices
[    0.223473] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.223474] vgaarb: loaded
[    0.223475] vgaarb: bridge control possible 0000:02:00.0
[    0.223640] SCSI subsystem initialized
[    0.223697] libata version 3.00 loaded.
[    0.223721] ACPI: bus type USB registered
[    0.223741] usbcore: registered new interface driver usbfs
[    0.223749] usbcore: registered new interface driver hub
[    0.223793] usbcore: registered new device driver usb
[    0.223919] PCI: Using ACPI for IRQ routing
[    0.225393] PCI: pci_cache_line_size set to 64 bytes
[    0.225427] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.225429] e820: reserve RAM buffer [mem 0xcfef0000-0xcfffffff]
[    0.225528] NetLabel: Initializing
[    0.225529] NetLabel:  domain hash size = 128
[    0.225530] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.225543] NetLabel:  unlabeled traffic allowed by default
[    0.225618] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.225624] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[    0.225628] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.227756] Switched to clocksource hpet
[    0.233373] AppArmor: AppArmor Filesystem Enabled
[    0.233414] pnp: PnP ACPI init
[    0.233432] ACPI: bus type PNP registered
[    0.233605] system 00:00: [io  0x1000-0x107f] could not be reserved
[    0.233607] system 00:00: [io  0x1080-0x10ff] has been reserved
[    0.233609] system 00:00: [io  0x1400-0x147f] has been reserved
[    0.233611] system 00:00: [io  0x1480-0x14ff] has been reserved
[    0.233613] system 00:00: [io  0x1800-0x187f] has been reserved
[    0.233615] system 00:00: [io  0x1880-0x18ff] has been reserved
[    0.233617] system 00:00: [mem 0xfefe0000-0xfefe01ff] has been reserved
[    0.233619] system 00:00: [mem 0xfefe1000-0xfefe10ff] has been reserved
[    0.233624] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.233703] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.233705] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.233707] system 00:01: [io  0x0295-0x0296] has been reserved
[    0.233709] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.233711] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.233721] pnp 00:02: [dma 4]
[    0.233737] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.233810] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.233847] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.233868] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.233895] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.234009] pnp 00:07: [dma 2]
[    0.234039] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.234243] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.234444] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.234980] system 00:0a: [mem 0xe0000000-0xe3ffffff] has been reserved
[    0.234983] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.235133] system 00:0b: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.235136] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.235138] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.235140] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.235142] system 00:0b: [mem 0xcfef0000-0xcfefffff] could not be reserved
[    0.235144] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
[    0.235146] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.235148] system 00:0b: [mem 0x00100000-0xcfeeffff] could not be reserved
[    0.235150] system 00:0b: [mem 0xcff00000-0xcfffffff] could not be reserved
[    0.235152] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.235154] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.235156] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.235169] pnp: PnP ACPI: found 12 devices
[    0.235170] ACPI: bus type PNP unregistered
[    0.241939] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.241942] pci 0000:00:04.0:   bridge window [io  0xc000-0xcfff]
[    0.241946] pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.241948] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff pref]
[    0.241955] pci 0000:02:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref]
[    0.241958] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.241960] pci 0000:00:09.0:   bridge window [io  0xb000-0xbfff]
[    0.241962] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.241965] pci 0000:00:09.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.241968] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.241970] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.241972] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.241974] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.241975] pci_bus 0000:00: resource 8 [mem 0xe4000000-0xfebfffff]
[    0.241977] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xdfffffff]
[    0.241979] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.241981] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.241983] pci_bus 0000:01: resource 2 [mem 0xfdf00000-0xfdffffff pref]
[    0.241984] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.241986] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.241988] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.241990] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff]
[    0.241991] pci_bus 0000:01: resource 8 [mem 0xe4000000-0xfebfffff]
[    0.241993] pci_bus 0000:01: resource 9 [mem 0xd0000000-0xdfffffff]
[    0.241995] pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
[    0.241997] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[    0.241999] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.242036] NET: Registered protocol family 2
[    0.242255] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.242395] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.242595] TCP: Hash tables configured (established 32768 bind 32768)
[    0.242648] TCP: reno registered
[    0.242657] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.242690] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.242782] NET: Registered protocol family 1
[    0.243015] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[    0.324086] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[    0.324185] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.324230] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.324284] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.324335] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.324391] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.324410] pci 0000:02:00.0: Boot video device
[    0.324413] PCI: CLS 4 bytes, default 64
[    0.324488] Trying to unpack rootfs image as initramfs...
[    0.745777] Freeing initrd memory: 25960K (ffff880034d3c000 - ffff880036696000)
[    0.745999] PCI-DMA: Disabling AGP.
[    0.746085] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    0.746087] PCI-DMA: using GART IOMMU.
[    0.746090] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.749914] LVT offset 1 assigned for vector 0x400
[    0.749926] IBS: LVT offset 1 assigned
[    0.749951] perf: AMD IBS detected (0x00000007)
[    0.750006] microcode: CPU0: patch_level=0x01000095
[    0.750013] microcode: CPU1: patch_level=0x01000095
[    0.750079] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.750081] Scanning for low memory corruption every 60 seconds
[    0.750339] Initialise system trusted keyring
[    0.750384] audit: initializing netlink socket (disabled)
[    0.750398] type=2000 audit(1413672020.640:1): initialized
[    0.775811] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.777083] zbud: loaded
[    0.777245] VFS: Disk quotas dquot_6.5.2
[    0.777293] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.777769] fuse init (API version 7.22)
[    0.777861] msgmni has been set to 7898
[    0.777928] Key type big_key registered
[    0.778433] Key type asymmetric registered
[    0.778435] Asymmetric key parser 'x509' registered
[    0.778470] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.778510] io scheduler noop registered
[    0.778512] io scheduler deadline registered (default)
[    0.778538] io scheduler cfq registered
[    0.778654] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[    0.778704] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.778719] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.778764] ipmi message handler version 39.2
[    0.778843] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.778848] ACPI: Power Button [PWRB]
[    0.778889] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.778891] ACPI: Power Button [PWRF]
[    0.779057] GHES: HEST is not enabled!
[    0.779161] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.799544] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.801071] Linux agpgart interface v0.103
[    0.802419] brd: module loaded
[    0.803132] loop: module loaded
[    0.803506] libphy: Fixed MDIO Bus: probed
[    0.803585] tun: Universal TUN/TAP device driver, 1.6
[    0.803586] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.803627] PPP generic driver version 2.4.2
[    0.803679] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.803683] ehci-pci: EHCI PCI platform driver
[    0.803822] ehci-pci 0000:00:02.1: EHCI Host Controller
[    0.803828] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.803837] ehci-pci 0000:00:02.1: debug port 1
[    0.803870] ehci-pci 0000:00:02.1: cache line size of 4 is not supported
[    0.803893] ehci-pci 0000:00:02.1: irq 22, io mem 0xfe02e000
[    0.812494] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.812561] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.812563] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.812565] usb usb1: Product: EHCI Host Controller
[    0.812567] usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.812568] usb usb1: SerialNumber: 0000:00:02.1
[    0.812672] hub 1-0:1.0: USB hub found
[    0.812678] hub 1-0:1.0: 10 ports detected
[    0.812837] ehci-platform: EHCI generic platform driver
[    0.812846] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.812848] ohci-pci: OHCI PCI platform driver
[    0.812934] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    0.812939] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.812965] ohci-pci 0000:00:02.0: irq 23, io mem 0xfe02f000
[    0.870580] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.870582] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.870583] usb usb2: Product: OHCI PCI host controller
[    0.870585] usb usb2: Manufacturer: Linux 3.13.0-37-generic ohci_hcd
[    0.870586] usb usb2: SerialNumber: 0000:00:02.0
[    0.870672] hub 2-0:1.0: USB hub found
[    0.870678] hub 2-0:1.0: 10 ports detected
[    0.870822] ohci-platform: OHCI generic platform driver
[    0.870829] uhci_hcd: USB Universal Host Controller Interface driver
[    0.870885] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.905532] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[    0.905533] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[    1.157011] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.157118] mousedev: PS/2 mouse device common for all mice
[    1.157262] rtc_cmos 00:04: RTC can wake from S4
[    1.157416] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.157454] rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.157517] device-mapper: uevent: version 1.0.3
[    1.157591] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.157600] ledtrig-cpu: registered to indicate activity on CPUs
[    1.157697] TCP: cubic registered
[    1.157784] NET: Registered protocol family 10
[    1.157964] NET: Registered protocol family 17
[    1.157973] Key type dns_resolver registered
[    1.158225] Loading compiled-in X.509 certificates
[    1.159165] Loaded X.509 cert 'Magrathea: Glacier signing key: ff0beb61ba6d12414cb04ad4776006ea44af33a5'
[    1.159177] registered taskstats version 1
[    1.161609] Key type trusted registered
[    1.163617] Key type encrypted registered
[    1.165464] AppArmor: AppArmor sha1 policy hashing enabled
[    1.165468] IMA: No TPM chip found, activating TPM-bypass!
[    1.165649] regulator-dummy: disabling
[    1.165705]   Magic number: 2:844:704
[    1.165735] event_source cpu: hash matches
[    1.165787]  cpu: hash matches
[    1.165832] rtc_cmos 00:04: setting system clock to 2014-10-18 22:40:21 UTC (1413672021)
[    1.165931] acpi-cpufreq: overriding BIOS provided _PSD data
[    1.165988] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.165989] EDD information not available.
[    1.166016] PM: Hibernation image not present or could not be loaded.
[    1.167542] Freeing unused kernel memory: 1360K (ffffffff81d1e000 - ffffffff81e72000)
[    1.167545] Write protecting the kernel read-only data: 12288k
[    1.169203] Freeing unused kernel memory: 568K (ffff880001772000 - ffff880001800000)
[    1.170840] Freeing unused kernel memory: 608K (ffff880001b68000 - ffff880001c00000)
[    1.187213] udevd[113]: starting version 175
[    1.220781] sata_nv 0000:00:08.0: version 3.5
[    1.230870] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[    1.232170] scsi0 : sata_nv
[    1.232328] scsi1 : sata_nv
[    1.232369] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 21
[    1.232371] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 21
[    1.232438] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.232656] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[    1.301711] Floppy drive(s): fd0 is 1.44M
[    1.321065] FDC 0 is a post-1991 82077
[    1.697605] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.705809] ata1.00: HPA detected: current 625140335, native 625142448
[    1.705815] ata1.00: ATA-7: SAMSUNG HD322HJ, 1AG01118, max UDMA7
[    1.705817] ata1.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.713816] ata1.00: configured for UDMA/133
[    1.713977] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD322HJ  1AG0 PQ: 0 ANSI: 5
[    1.714147] sd 0:0:0:0: [sda] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[    1.714172] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.714196] sd 0:0:0:0: [sda] Write Protect is off
[    1.714199] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.714243] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.749655] tsc: Refined TSC clocksource calibration: 2712.335 MHz
[    1.758362] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:24:1d:13:17:d0
[    1.758365] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[    1.758397] pata_amd 0000:00:06.0: version 0.4.1
[    1.759000] scsi2 : pata_amd
[    1.759062] scsi3 : pata_amd
[    1.759094] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.759095] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.770752]  sda: sda2 < sda5 sda6 sda7 sda8 >
[    1.771173] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.922326] ata3.00: HPA detected: current 78163247, native 78165360
[    1.922330] ata3.00: ATA-6: ST340810A, 3.39, max UDMA/100
[    1.922332] ata3.00: 78163247 sectors, multi 16: LBA
[    1.922339] ata3: nv_mode_filter: 0x3f39f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[    1.938281] ata3.00: configured for UDMA/33
[    2.036255] ata2: SATA link down (SStatus 0 SControl 300)
[    2.036383] scsi 2:0:0:0: Direct-Access     ATA      ST340810A        3.39 PQ: 0 ANSI: 5
[    2.036497] sd 2:0:0:0: [sdb] 78163247 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    2.036533] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.036563] sd 2:0:0:0: [sdb] Write Protect is off
[    2.036566] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.036595] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.036605] ata4: port disabled--ignoring
[    2.044593]  sdb: sdb1
[    2.044853] sd 2:0:0:0: [sdb] Attached SCSI disk
[    2.150168] usb 2-3: new low-speed USB device number 2 using ohci-pci
[    2.384449] usb 2-3: New USB device found, idVendor=045e, idProduct=00dd
[    2.384454] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.384456] usb 2-3: Product: Comfort Curve Keyboard 2000
[    2.384458] usb 2-3: Manufacturer: Microsoft
[    2.393841] hidraw: raw HID events driver (C) Jiri Kosina
[    2.420643] usbcore: registered new interface driver usbhid
[    2.420647] usbhid: USB HID core driver
[    2.423886] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input3
[    2.423978] hid-generic 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:02.0-3/input0
[    2.426606] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input4
[    2.426693] hid-generic 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:02.0-3/input1
[    2.690822] usb 2-4: new full-speed USB device number 3 using ohci-pci
[    2.750953] Switched to clocksource tsc
[    2.903077] usb 2-4: New USB device found, idVendor=0ac8, idProduct=303b
[    2.903080] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.903082] usb 2-4: Product: PC Camera
[    2.903084] usb 2-4: Manufacturer: Vimicro Corp.
[    3.207445] usb 2-5: new full-speed USB device number 4 using ohci-pci
[    3.429725] usb 2-5: New USB device found, idVendor=045e, idProduct=074f
[    3.429729] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.429731] usb 2-5: Product: Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v5.0
[    3.429733] usb 2-5: Manufacturer: Microsoft
[    3.443454] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v5.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input5
[    3.443588] hid-generic 0003:045E:074F.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v5.0] on usb-0000:00:02.0-5/input0
[    3.676958] EXT4-fs (sda8): INFO: recovery required on readonly filesystem
[    3.676963] EXT4-fs (sda8): write access will be enabled during recovery
[    4.133370] EXT4-fs (sda8): orphan cleanup on readonly fs
[    4.149280] EXT4-fs (sda8): 5 orphan inodes deleted
[    4.149283] EXT4-fs (sda8): recovery complete
[    4.224089] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[    4.323404] random: nonblocking pool is initialized
[    5.050015] init: ureadahead main process (385) terminated with status 5
[    5.705410] Adding 3998716k swap on /dev/sda7.  Priority:-1 extents:1 across:3998716k FS
[    6.205750] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.373883] udevd[459]: starting version 175
[    7.030205] lp: driver loaded but no devices found
[    7.117035] it87: Found IT8718F chip at 0x290, revision 5
[    7.117063] it87: Beeping is supported
[    7.517374] parport_pc 00:09: reported by Plug and Play ACPI
[    7.517419] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    7.601607] ppdev: user-space parallel port driver
[    7.613029] lp0: using parport0 (interrupt-driven).
[    7.709989] k10temp 0000:00:18.3: unreliable CPU thermal sensor; check erratum 319
[    7.946468] MCE: In-kernel MCE decoding enabled.
[    8.040080] EDAC MC: Ver: 3.0.0
[    8.055702] [drm] Initialized drm 1.1.0 20060810
[    8.114692] AMD64 EDAC driver v3.4.0
[    8.114729] EDAC amd64: DRAM ECC disabled.
[    8.114735] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    8.114735]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    8.114735]  (Note that use of the override may cause unknown side effects.)
[    8.124831] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[    8.124859] i2c i2c-1: nForce2 SMBus adapter at 0x1c40
[    9.250432] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.374455] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[    9.374502] snd-ca0106: Model 1004 Rev 00000000 Serial 10041102
[    9.381969] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[    9.381983] hda_intel: Disabling MSI
[    9.382007] hda-intel 0000:00:05.0: Disabling 64bit DMA
[    9.386321] hda-intel 0000:00:05.0: Enable delay in RIRB handling
[    9.640961] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    9.646794] Linux video capture interface: v2.00
[    9.920854] gspca_main: v2.14.0 registered
[    9.949249] gspca_main: gspca_zc3xx-2.14.0 probing 0ac8:303b
[   10.019839] SKU: Nid=0x0 sku_cfg=0x0000c601
[   10.019844] SKU: port_connectivity=0x0
[   10.019845] SKU: enable_pcbeep=0x1
[   10.019849] SKU: check_sum=0x00000000
[   10.019850] SKU: customization=0x00000000
[   10.019851] SKU: external_amp=0x0
[   10.019939] SKU: platform_type=0x0
[   10.019940] SKU: swap=0x0
[   10.019941] SKU: override=0x1
[   10.083906] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   10.083917]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.083919]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   10.083920]    mono: mono_out=0x0
[   10.083922]    dig-out=0x1e/0x0
[   10.083922]    inputs:
[   10.083925]      Rear Mic=0x18
[   10.083926]      Front Mic=0x19
[   10.083930]      Line=0x1a
[   10.083931]      CD=0x1c
[   10.083931]    dig-in=0x1f
[   10.083933] realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0883
[   10.219203] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   10.330305] input: gspca_zc3xx as /devices/pci0000:00/0000:00:02.0/usb2/2-4/input/input6
[   10.330635] usbcore: registered new interface driver gspca_zc3xx
[   10.656398] type=1400 audit(1413661230.977:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=726 comm="apparmor_parser"
[   10.656408] type=1400 audit(1413661230.977:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=726 comm="apparmor_parser"
[   10.656412] type=1400 audit(1413661230.977:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=726 comm="apparmor_parser"
[   10.656432] type=1400 audit(1413661230.977:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=727 comm="apparmor_parser"
[   10.656444] type=1400 audit(1413661230.977:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=727 comm="apparmor_parser"
[   10.656449] type=1400 audit(1413661230.977:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=727 comm="apparmor_parser"
[   10.656972] type=1400 audit(1413661230.977:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=726 comm="apparmor_parser"
[   10.656979] type=1400 audit(1413661230.977:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=726 comm="apparmor_parser"
[   10.657000] type=1400 audit(1413661230.977:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=727 comm="apparmor_parser"
[   10.657005] type=1400 audit(1413661230.977:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=727 comm="apparmor_parser"
[   11.249799] nvidia: module license 'NVIDIA' taints kernel.
[   11.249804] Disabling lock debugging due to kernel taint
[   11.260998] nvidia: module verification failed: signature and/or  required key missing - tainting kernel
[   11.267434] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[   11.267466] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
[   11.267764] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:02:00.0 on minor 0
[   11.267772] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.20  Wed Oct 30 17:43:35 PDT 2013
[   11.814148] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card1/input11
[   11.814242] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card1/input10
[   11.814295] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card1/input9
[   11.814344] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card1/input8
[   11.814395] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card1/input7
[   11.992858] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[   12.186177] init: udev-fallback-graphics main process (994) terminated with status 1
[   12.781365] init: failsafe main process (1023) killed by TERM signal
[   16.495688] vboxdrv: Found 2 processor cores.
[   16.496058] vboxdrv: fAsync=0 offMin=0x38f offMax=0xc09
[   16.496151] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   16.496152] vboxdrv: Successfully loaded version 4.3.18 (interface 0x001a0008).
[   16.897494] vboxpci: IOMMU not found (not registered)
[   17.116365] forcedeth 0000:00:07.0: irq 41 for MSI/MSI-X
[   17.116398] forcedeth 0000:00:07.0 eth0: MSI enabled
[   27.139845] nvidia 0000:02:00.0: irq 42 for MSI/MSI-X
[  338.884389] audit_printk_skb: 168 callbacks suppressed
[  338.884397] type=1400 audit(1413672358.526:68): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=1140 comm="cupsd" capability=36  capname="block_suspend"

şunu da denedim belki faydası olur:

Kod Seç Genişlet

dogan@dogan-lin:~$ sudo alsa force-reload
[sudo] password for dogan:
Unloading ALSA sound driver modules: snd-hda-codec-realtek snd-hda-intel snd-ca0106 snd-ac97-codec snd-hda-codec snd-hwdep snd-pcm snd-seq-midi snd-rawmidi snd-seq-midi-event snd-seq snd-timer snd-seq-device snd-page-alloc (failed: modules still loaded: snd-hda-codec-realtek snd-hda-intel snd-ca0106 snd-ac97-codec snd-hda-codec snd-hwdep snd-pcm snd-rawmidi snd-timer snd-seq-device snd-page-alloc).
Loading ALSA sound driver modules: snd-hda-codec-realtek snd-hda-intel snd-ca0106 snd-ac97-codec snd-hda-codec snd-hwdep snd-pcm snd-seq-midi snd-rawmidi snd-seq-midi-event snd-seq snd-timer snd-seq-device snd-page-alloc.


[if]

Oradaki öneride kartın 48000 Hz üzerini desteklediği yazıyordu. Öneri olarak /etc/pulse/daemon.conf  dosyasında sample-rate = 48000 değişikliği önerilmiş. Bunu mu yaptınız?

[krmz]

evet 44100 yazıyordu..

Kod Seç Genişlet

sudo gedit /etc/default/speech-dispatcher
içeriğini RUN:yes olarak değiştirdim şimdi
garip bir şekilde 6 dkdır sorunsuz çalıyor diyecekken yine kesildi
speech dispatcher ın da ne olduğunu bilmiyorum

[if]

Değişiklikten sonra Pulseaudio'yu yeniden başlatmak gerekti aslında. Speechdispatcher'ın bir ilgisi olmamalı.