ubuntu 10.04 kablolu ağa bağlanamama

[Trabula]

merhaba arkadaşlar evdeki masaüstüme ubuntu 10.04 ü yükledim fakat ağa bağlanamadım forumda biraz dolaştım ama acemi olduğum için bişey yapamadım yardımcı olabilirseniz çok sevinirim. 

[bytan]

Biraz daha güncele gelirsen iyi olur. 10.04 çok gerilerde kaldı ve desteklenmiyor artık. Bu ay içinde 14.10 sürümü çıkacak. Duruma göre kendine bir yön vermelisin.

https://forum.ubuntu-tr.net/index.php?topic=28764.0

[Trabula]

kendi bilgisayarımda ubuntu 14.04 kullanıyorum fakat masaüstü bilgisayarımın sistemi düşük olduğu için 10 u kurmuştum.

cat /etc/lsb-release

Kod Seç Genişlet

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=10.04
DISTRIB_CODENAME=lucid
DISTRIB_DESCRIPTION="Ubuntu 10.04.4 LT


uname -a

Kod Seç Genişlet

Linux ev-desktop 2.6.32-38-generic #83-Ubuntu SMP Wed Jan 4 11:13:04 UTC 2012 i686 GNU/Linux

lspci

Kod Seç Genişlet

00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02)
00:06.0 System peripheral: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation NV36 [GeForce FX 5700LE] (rev a1)
02:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet Controller (rev 02)
02:09.0 Communication controller: Conexant Systems, Inc. HSF 56k HSFi Modem (rev 01)


lsusb

Kod Seç Genişlet

Bus 005 Device 002: ID 09da:054f A4 Tech Co., Ltd
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0781:556b SanDisk Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


rfkill list  kodunu yazınca çıktı alamadım

sudo lshw -C network

Kod Seç Genişlet


  *-network               
       description: Ethernet interface
       product: 82562EZ 10/100 Ethernet Controller
       vendor: Intel Corporation
       physical id: 8
       bus info: pci@0000:02:08.0
       logical name: eth0
       version: 02
       serial: 00:11:09:c2:5b:fe
       size: 100MB/s
       capacity: 100MB/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=full firmware=N/A latency=32 link=yes maxlatency=56 mingnt=8 multicast=yes port=MII speed=100MB/s
       resources: irq:20 memory:f6010000-f6010fff ioport:9000(size=64)


ifconfig

Kod Seç Genişlet

eth0      Link encap:Ethernet  HWaddr 00:11:09:c2:5b:fe 
          inet6 addr: fe80::211:9ff:fec2:5bfe/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1542 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:115128 (115.1 KB)  TX bytes:670 (670.0 B)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:280 errors:0 dropped:0 overruns:0 frame:0
          TX packets:280 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:21552 (21.5 KB)  TX bytes:21552 (21.5 KB)


iwconfig

Kod Seç Genişlet

lo        no wireless extensions.

eth0      no wireless extensions.


iwlist scanning

Kod Seç Genişlet

lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.


lsmod

Kod Seç Genişlet

Module                  Size  Used by
nls_iso8859_1           3249  1
nls_cp437               4919  1
vfat                    8933  1
fat                    47767  1 vfat
usb_storage            40033  1
binfmt_misc             6587  1
fbcon                  35102  71
tileblit                1999  1 fbcon
font                    7557  1 fbcon
bitblit                 4707  1 fbcon
softcursor              1189  1 bitblit
vga16fb                11385  0
vgastate                8961  1 vga16fb
snd_intel8x0           25652  2
snd_ac97_codec        100646  1 snd_intel8x0
ac97_bus                1002  1 snd_ac97_codec
snd_pcm_oss            35308  0
snd_mixer_oss          13746  1 snd_pcm_oss
snd_pcm                70694  3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy           1338  0
snd_seq_oss            26722  0
snd_seq_midi            4557  0
snd_rawmidi            19056  1 snd_seq_midi
snd_seq_midi_event      6003  2 snd_seq_oss,snd_seq_midi
snd_seq                47263  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
nouveau               467048  2
ttm                    49847  1 nouveau
snd_timer              19130  2 snd_pcm,snd_seq
snd_seq_device          5700  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
drm_kms_helper         29329  1 nouveau
ppdev                   5259  0
drm                   163747  4 nouveau,ttm,drm_kms_helper
snd                    54244  14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_algo_bit            5028  1 nouveau
intel_agp              24375  1
parport_pc             25962  1
soundcore               6620  1 snd
joydev                  8740  0
snd_page_alloc          7076  2 snd_intel8x0,snd_pcm
agpgart                31724  3 ttm,drm,intel_agp
shpchp                 28835  0
lp                      7028  0
parport                32635  3 ppdev,parport_pc,lp
usbhid                 36110  0
hid                    67288  1 usbhid
floppy                 53016  0
e100                   28211  0
mii                     4381  1 e100


dmesg

Kod Seç Genişlet

[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3000.605 MHz processor.
[    0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6001.21 BogoMIPS (lpj=12002420)
[    0.008027] Security Framework initialized
[    0.008049] AppArmor: AppArmor initialized
[    0.008059] Mount-cache hash table entries: 512
[    0.008209] Initializing cgroup subsys ns
[    0.008214] Initializing cgroup subsys cpuacct
[    0.008220] Initializing cgroup subsys memory
[    0.008229] Initializing cgroup subsys devices
[    0.008232] Initializing cgroup subsys freezer
[    0.008235] Initializing cgroup subsys net_cls
[    0.008264] CPU: Trace cache: 12K uops, L1 D cache: 16K
[    0.008269] CPU: L2 cache: 1024K
[    0.008272] CPU: Physical Processor ID: 0
[    0.008274] CPU: Processor Core ID: 0
[    0.008279] mce: CPU supports 4 MCE banks
[    0.008292] CPU0: Thermal monitoring enabled (TM1)
[    0.008298] using mwait in idle threads.
[    0.008305] Performance Events: no PMU driver, software events only.
[    0.008313] Checking 'hlt' instruction... OK.
[    0.027986] ACPI: Core revision 20090903
[    0.040012] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.040020] ftrace: allocating 21817 entries in 43 pages
[    0.048085] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.048383] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.091439] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[    0.092001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.012000] Initializing CPU#1
[    0.012000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[    0.012000] CPU: L2 cache: 1024K
[    0.012000] CPU: Physical Processor ID: 0
[    0.012000] CPU: Processor Core ID: 0
[    0.012000] CPU1: Thermal monitoring enabled (TM1)
[    0.176103] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[    0.176115] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.180032] Brought up 2 CPUs
[    0.180037] Total of 2 processors activated (12002.62 BogoMIPS).
[    0.180671] CPU0 attaching sched-domain:
[    0.180677]  domain 0: span 0-1 level SIBLING
[    0.180680]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[    0.180689]   domain 1: span 0-1 level MC
[    0.180692]    groups: 0-1 (cpu_power = 1178)
[    0.180700] CPU1 attaching sched-domain:
[    0.180703]  domain 0: span 0-1 level SIBLING
[    0.180706]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[    0.180713]   domain 1: span 0-1 level MC
[    0.180716]    groups: 0-1 (cpu_power = 1178)
[    0.180834] devtmpfs: initialized
[    0.180834] regulator: core version 0.5
[    0.180834] Time: 19:28:46  Date: 10/05/14
[    0.180834] NET: Registered protocol family 16
[    0.180834] Trying to unpack rootfs image as initramfs...
[    0.180834] EISA bus registered
[    0.180834] ACPI: bus type pci registered
[    0.209239] PCI: PCI BIOS revision 2.10 entry at 0xfbc10, last bus=2
[    0.209244] PCI: Using configuration type 1 for base access
[    0.211444] bio: create slab <bio-0> at 0
[    0.212660] ACPI: EC: Look up EC in DSDT
[    0.220790] ACPI: Interpreter enabled
[    0.220801] ACPI: (supports S0 S1 S4 S5)
[    0.220846] ACPI: Using IOAPIC for interrupt routing
[    0.228696] ACPI: No dock devices found.
[    0.228858] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.228932] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[    0.228946] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf3ffffff]
[    0.229067] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
[    0.229183] pci 0000:00:1d.0: reg 20 io port: [0xac00-0xac1f]
[    0.229252] pci 0000:00:1d.1: reg 20 io port: [0xa000-0xa01f]
[    0.229322] pci 0000:00:1d.2: reg 20 io port: [0xa400-0xa41f]
[    0.229392] pci 0000:00:1d.3: reg 20 io port: [0xa800-0xa81f]
[    0.229470] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf6100000-0xf61003ff]
[    0.229535] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.229543] pci 0000:00:1d.7: PME# disabled
[    0.229653] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.229694] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.229705] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    0.229715] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[    0.229725] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[    0.229736] pci 0000:00:1f.1: reg 20 io port: [0xf000-0xf00f]
[    0.229747] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[    0.229813] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[    0.229873] pci 0000:00:1f.5: reg 10 io port: [0xb400-0xb4ff]
[    0.229883] pci 0000:00:1f.5: reg 14 io port: [0xb800-0xb83f]
[    0.229894] pci 0000:00:1f.5: reg 18 32bit mmio: [0xf6101000-0xf61011ff]
[    0.229904] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf6102000-0xf61020ff]
[    0.229943] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.229950] pci 0000:00:1f.5: PME# disabled
[    0.230021] pci 0000:01:00.0: reg 10 32bit mmio: [0xf4000000-0xf4ffffff]
[    0.230031] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xe0000000-0xefffffff]
[    0.230058] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.230134] pci 0000:00:01.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff]
[    0.230142] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff]
[    0.230199] pci 0000:02:08.0: reg 10 32bit mmio: [0xf6010000-0xf6010fff]
[    0.230210] pci 0000:02:08.0: reg 14 io port: [0x9000-0x903f]
[    0.230257] pci 0000:02:08.0: supports D1 D2
[    0.230262] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.230269] pci 0000:02:08.0: PME# disabled
[    0.230311] pci 0000:02:09.0: reg 10 32bit mmio: [0xf6000000-0xf600ffff]
[    0.230321] pci 0000:02:09.0: reg 14 io port: [0x9400-0x9407]
[    0.230369] pci 0000:02:09.0: PME# supported from D0 D3hot D3cold
[    0.230376] pci 0000:02:09.0: PME# disabled
[    0.230417] pci 0000:00:1e.0: transparent bridge
[    0.230425] pci 0000:00:1e.0: bridge io port: [0x9000-0x9fff]
[    0.230433] pci 0000:00:1e.0: bridge 32bit mmio: [0xf6000000-0xf60fffff]
[    0.230453] pci_bus 0000:00: on NUMA node 0
[    0.230462] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.230692] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.244080] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.244262] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[    0.244454] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.244631] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.244815] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.245003] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.245180] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.245373] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[    0.245593] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.245602] vgaarb: loaded
[    0.245846] SCSI subsystem initialized
[    0.246012] libata version 3.00 loaded.
[    0.246146] usbcore: registered new interface driver usbfs
[    0.246172] usbcore: registered new interface driver hub
[    0.246221] usbcore: registered new device driver usb
[    0.246497] ACPI: WMI: Mapper loaded
[    0.246501] PCI: Using ACPI for IRQ routing
[    0.246764] NetLabel: Initializing
[    0.246768] NetLabel:  domain hash size = 128
[    0.246772] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.246796] NetLabel:  unlabeled traffic allowed by default
[    0.246953] hpet clockevent registered
[    0.246960] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.246968] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.246978] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.252046] Switching to clocksource tsc
[    0.255803] AppArmor: AppArmor Filesystem Enabled
[    0.255830] pnp: PnP ACPI init
[    0.255870] ACPI: bus type pnp registered
[    0.261037] pnp: PnP ACPI: found 13 devices
[    0.261043] ACPI: ACPI bus type pnp unregistered
[    0.261052] PnPBIOS: Disabled by ACPI PNP
[    0.261074] system 00:01: ioport range 0xb78-0xb7b has been reserved
[    0.261080] system 00:01: ioport range 0xf78-0xf7b has been reserved
[    0.261086] system 00:01: ioport range 0xa78-0xa7b has been reserved
[    0.261091] system 00:01: ioport range 0xe78-0xe7b has been reserved
[    0.261097] system 00:01: ioport range 0xbbc-0xbbf has been reserved
[    0.261103] system 00:01: ioport range 0xfbc-0xfbf has been reserved
[    0.261108] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    0.261114] system 00:01: ioport range 0x294-0x297 has been reserved
[    0.261133] system 00:0b: ioport range 0x400-0x4bf has been reserved
[    0.261147] system 00:0c: iomem range 0xd1800-0xd3fff has been reserved
[    0.261153] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[    0.261159] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[    0.261165] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[    0.261171] system 00:0c: iomem range 0x1fff0000-0x1fffffff could not be reserved
[    0.261177] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[    0.261182] system 00:0c: iomem range 0x100000-0x1ffeffff could not be reserved
[    0.261189] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.261195] system 00:0c: iomem range 0xfec01000-0xfed8ffff could not be reserved
[    0.261201] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.261207] system 00:0c: iomem range 0xffb00000-0xffbfffff has been reserved
[    0.261212] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
[    0.261218] system 00:0c: iomem range 0xe0000-0xeffff has been reserved
[    0.296132] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.296138] pci 0000:00:01.0:   IO window: disabled
[    0.296147] pci 0000:00:01.0:   MEM window: 0xf4000000-0xf5ffffff
[    0.296154] pci 0000:00:01.0:   PREFETCH window: 0xe0000000-0xefffffff
[    0.296164] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.296170] pci 0000:00:1e.0:   IO window: 0x9000-0x9fff
[    0.296179] pci 0000:00:1e.0:   MEM window: 0xf6000000-0xf60fffff
[    0.296185] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.296210] pci 0000:00:1e.0: setting latency timer to 64
[    0.296218] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.296224] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.296229] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf5ffffff]
[    0.296234] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[    0.296240] pci_bus 0000:02: resource 0 io:  [0x9000-0x9fff]
[    0.296245] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf60fffff]
[    0.296250] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.296255] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.296328] NET: Registered protocol family 2
[    0.296514] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.297134] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.297244] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.297325] TCP: Hash tables configured (established 16384 bind 16384)
[    0.297330] TCP reno registered
[    0.297452] NET: Registered protocol family 1
[    0.297585] pci 0000:01:00.0: Boot video device
[    0.297602] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[    0.297913] cpufreq-nforce2: No nForce2 chipset.
[    0.297965] Scanning for low memory corruption every 60 seconds
[    0.298157] audit: initializing netlink socket (disabled)
[    0.298177] type=2000 audit(1412537325.295:1): initialized
[    0.310527] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.313728] VFS: Disk quotas dquot_6.5.2
[    0.313849] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.315096] fuse init (API version 7.13)
[    0.315279] msgmni has been set to 977
[    0.315717] alg: No test for stdrng (krng)
[    0.315834] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.315840] io scheduler noop registered
[    0.315844] io scheduler anticipatory registered
[    0.315848] io scheduler deadline registered
[    0.315935] io scheduler cfq registered (default)
[    0.316157] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.316208] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.316378] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.316385] ACPI: Power Button [PWRB]
[    0.316493] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.316499] ACPI: Power Button [PWRF]
[    0.316583] fan PNP0C0B:00: registered as cooling_device0
[    0.316595] ACPI: Fan [FAN] (on)
[    0.316974] processor LNXCPU:00: registered as cooling_device1
[    0.317045] processor LNXCPU:01: registered as cooling_device2
[    0.321274] thermal LNXTHERM:01: registered as thermal_zone0
[    0.321291] ACPI: Thermal Zone [THRM] (54 C)
[    0.324465] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.324580] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.324697] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.325211] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.325407] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.327634] brd: module loaded
[    0.328637] loop: module loaded
[    0.328811] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.328996] ata_piix 0000:00:1f.1: version 2.13
[    0.329030]   alloc irq_desc for 18 on node -1
[    0.329037]   alloc kstat_irqs on node -1
[    0.329053] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.329119] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.329257] scsi0 : ata_piix
[    0.329406] scsi1 : ata_piix
[    0.330826] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.330833] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.331117] isapnp: Scanning for PnP cards...
[    0.331551] Fixed MDIO Bus: probed
[    0.331617] PPP generic driver version 2.4.2
[    0.331698] tun: Universal TUN/TAP device driver, 1.6
[    0.331702] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.331860] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.331894]   alloc irq_desc for 23 on node -1
[    0.331898]   alloc kstat_irqs on node -1
[    0.331907] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.331928] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.331934] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.331997] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.335913] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[    0.335970] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf6100000
[    0.351527] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.351731] usb usb1: configuration #1 chosen from 1 choice
[    0.351790] hub 1-0:1.0: USB hub found
[    0.351806] hub 1-0:1.0: 8 ports detected
[    0.351927] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.351956] uhci_hcd: USB Universal Host Controller Interface driver
[    0.352020]   alloc irq_desc for 16 on node -1
[    0.352024]   alloc kstat_irqs on node -1
[    0.352034] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.352047] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.352053] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.352118] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.352156] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ac00
[    0.352314] usb usb2: configuration #1 chosen from 1 choice
[    0.352362] hub 2-0:1.0: USB hub found
[    0.352374] hub 2-0:1.0: 2 ports detected
[    0.352447]   alloc irq_desc for 19 on node -1
[    0.352451]   alloc kstat_irqs on node -1
[    0.352457] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.352466] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.352471] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.352525] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.352559] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a000
[    0.352713] usb usb3: configuration #1 chosen from 1 choice
[    0.352761] hub 3-0:1.0: USB hub found
[    0.352773] hub 3-0:1.0: 2 ports detected
[    0.352845] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.352854] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.352859] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.352920] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.352954] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a400
[    0.353106] usb usb4: configuration #1 chosen from 1 choice
[    0.353154] hub 4-0:1.0: USB hub found
[    0.353167] hub 4-0:1.0: 2 ports detected
[    0.353241] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.353250] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.353255] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.353314] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.353340] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000a800
[    0.353502] usb usb5: configuration #1 chosen from 1 choice
[    0.353550] hub 5-0:1.0: USB hub found
[    0.353562] hub 5-0:1.0: 2 ports detected
[    0.353724] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.353729] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.354437] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.354627] mice: PS/2 mouse device common for all mice
[    0.354827] rtc_cmos 00:03: RTC can wake from S4
[    0.354892] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.354918] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.355117] device-mapper: uevent: version 1.0.3
[    0.374220] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.379891] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.471870] device-mapper: multipath: version 1.1.0 loaded
[    0.471877] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.503916] ata1.00: ATA-7: SAMSUNG SP1203N, TL100-24, max UDMA/100
[    0.503923] ata1.00: 234493056 sectors, multi 16: LBA48
[    0.509799] Freeing initrd memory: 7804k freed
[    0.516864] ata2.00: ATAPI: TSSTcorp CDW/DVD SH-M522C, TS06, max UDMA/33
[    0.517344] EISA: Probing bus 0 at eisa.0
[    0.517389] EISA: Detected 0 cards.
[    0.517570] cpuidle: using governor ladder
[    0.517574] cpuidle: using governor menu
[    0.518368] TCP cubic registered
[    0.518622] NET: Registered protocol family 10
[    0.520232] NET: Registered protocol family 17
[    0.520319] Using IPI No-Shortcut mode
[    0.520477] PM: Resume from disk failed.
[    0.520497] registered taskstats version 1
[    0.520772]   Magic number: 2:342:495
[    0.520870] rtc_cmos 00:03: setting system clock to 2014-10-05 19:28:46 UTC (1412537326)
[    0.520876] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.520879] EDD information not available.
[    0.523797] ata1.00: configured for UDMA/100
[    0.547536] ata2.00: configured for UDMA/33
[    0.685112] isapnp: No Plug & Play device found
[    0.685288] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP1203N  TL10 PQ: 0 ANSI: 5
[    0.685475] sd 0:0:0:0: [sda] 234493056 512-byte logical blocks: (120 GB/111 GiB)
[    0.685522] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.685568] sd 0:0:0:0: [sda] Write Protect is off
[    0.685575] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.685626] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.685976]  sda:
[    0.686285] scsi 1:0:0:0: CD-ROM            TSSTcorp CDW/DVD SH-M522C TS06 PQ: 0 ANSI: 5
[    0.689325] sr0: scsi3-mmc drive: 8x/52x writer cd/rw xa/form2 cdda tray
[    0.689329] Uniform CD-ROM driver Revision: 3.20
[    0.689449] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    0.689517] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    0.706591]  sda1 sda2 < sda5 >
[    0.727560] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.727581] Freeing unused kernel memory: 664k freed
[    0.728213] Write protecting the kernel text: 4700k
[    0.728268] Write protecting the kernel read-only data: 1844k
[    0.753098] udev: starting version 151
[    0.903507] usb 5-1: new full speed USB device using uhci_hcd and address 2
[    0.938507] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    0.938514] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.938583]   alloc irq_desc for 20 on node -1
[    0.938588]   alloc kstat_irqs on node -1
[    0.938600] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.961033] Floppy drive(s): fd0 is 1.44M
[    0.961688] e100 0000:02:08.0: PME# disabled
[    0.965603] e100: eth0: e100_probe: addr 0xf6010000, irq 20, MAC addr 00:11:09:c2:5b:fe
[    0.979306] FDC 0 is a post-1991 82077
[    1.075385] usb 5-1: configuration #1 chosen from 1 choice
[    1.101423] usbcore: registered new interface driver hiddev
[    1.104820] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input4
[    1.105072] generic-usb 0003:09DA:054F.0001: input,hiddev96,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1d.3-1/input0
[    1.107582] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input5
[    1.107765] generic-usb 0003:09DA:054F.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1d.3-1/input1
[    1.107813] usbcore: registered new interface driver usbhid
[    1.107820] usbhid: v2.6:USB HID core driver
[    1.115481] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    1.115488] EXT4-fs (sda1): write access will be enabled during recovery
[    1.905095] EXT4-fs (sda1): orphan cleanup on readonly fs
[    1.905107] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 655577
[    1.905196] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 655576
[    1.905222] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 655573
[    1.905266] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 655572
[    1.905290] EXT4-fs (sda1): 4 orphan inodes deleted
[    1.905295] EXT4-fs (sda1): recovery complete
[    2.082043] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   10.598790] udev: starting version 151
[   10.617478] Adding 1489912k swap on /dev/sda5.  Priority:-1 extents:1 across:1489912k
[   10.788843] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.857351] lp: driver loaded but no devices found
[   10.945813] Linux agpgart interface v0.103
[   10.996235] intel_rng: FWH not detected
[   11.053446] parport_pc 00:09: reported by Plug and Play ACPI
[   11.053501] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   11.065807] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[   11.084940] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf0000000
[   11.149338] lp0: using parport0 (interrupt-driven).
[   11.209261] [drm] Initialized drm 1.1.0 20060810
[   11.213082] ppdev: user-space parallel port driver
[   11.231658] type=1505 audit(1412537337.207:2):  operation="profile_load" pid=545 name="/sbin/dhclient3"
[   11.232640] type=1505 audit(1412537337.211:3):  operation="profile_load" pid=545 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   11.233124] type=1505 audit(1412537337.211:4):  operation="profile_load" pid=545 name="/usr/lib/connman/scripts/dhclient-script"
[   11.350123] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.354751] [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x436300a1)
[   11.354828] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[   11.498264] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   11.498495] [drm] nouveau 0000:01:00.0: BMP BIOS found
[   11.498500] [drm] nouveau 0000:01:00.0: BMP version 5.41
[   11.498506] [drm] nouveau 0000:01:00.0: Bios version 04.36.20.41
[   11.498511] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2
[   11.498517] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00009c40
[   11.498524] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010310 00009c40
[   11.498529] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01010312 00000000
[   11.498534] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020203f1 00000733
[   11.498725] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
[   11.498731] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xF18A
[   11.498790] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF692
[   11.500466] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF917
[   11.500520] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFA81
[   11.500606] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFA9E
[   11.500692] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xFABB
[   11.552372] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xFB92
[   11.567039]   alloc irq_desc for 17 on node -1
[   11.567045]   alloc kstat_irqs on node -1
[   11.567057] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   11.567096] Intel ICH 0000:00:1f.5: setting latency timer to 64
[   11.576609] [TTM] Zone  kernel: Available graphics memory: 254568 kiB.
[   11.576632] [drm] nouveau 0000:01:00.0: 256 MiB VRAM
[   11.576712] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[   11.576734] agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode.
[   11.576748] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[   11.576804] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[   11.576827] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[   11.577493] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[   11.578590] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
[   11.578607] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
[   11.578618] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[   11.629077] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[   11.629196] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[   11.629266] [drm] nouveau 0000:01:00.0: Detected a TV connector
[   11.630766] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[   11.630776] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
[   11.630784] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
[   11.630791] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[   11.637181] type=1505 audit(1412537337.615:5):  operation="profile_load" pid=666 name="/usr/share/gdm/guest-session/Xsession"
[   11.654364] type=1505 audit(1412537337.631:6):  operation="profile_replace" pid=667 name="/sbin/dhclient3"
[   11.655193] type=1505 audit(1412537337.631:7):  operation="profile_replace" pid=667 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   11.655654] type=1505 audit(1412537337.631:8):  operation="profile_replace" pid=667 name="/usr/lib/connman/scripts/dhclient-script"
[   11.676002] type=1505 audit(1412537337.651:9):  operation="profile_load" pid=668 name="/usr/bin/evince"
[   11.700026] type=1505 audit(1412537337.675:10):  operation="profile_load" pid=668 name="/usr/bin/evince-previewer"
[   11.709399] type=1505 audit(1412537337.687:11):  operation="profile_load" pid=668 name="/usr/bin/evince-thumbnailer"
[   11.766255] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.769160] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[   11.781180] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   11.816255] [drm] nouveau 0000:01:00.0: allocated 1600x900 fb: 0x49000, bo d5030c00
[   11.816399] fb0: nouveaufb frame buffer device
[   11.816403] registered panic notifier
[   11.816415] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[   11.820572] vga16fb: initializing
[   11.820579] vga16fb: mapped to 0xc00a0000
[   11.820587] vga16fb: not registering due to another framebuffer present
[   11.874048] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[   11.874059] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
[   11.888862] Console: switching to colour frame buffer device 200x56
[   11.892784] intel8x0_measure_ac97_clock: measured 59218 usecs (2853 samples)
[   11.892790] intel8x0: clocking to 48000
[   12.739857] CPU0 attaching NULL sched-domain.
[   12.739865] CPU1 attaching NULL sched-domain.
[   12.761067] CPU0 attaching sched-domain:
[   12.761072]  domain 0: span 0-1 level SIBLING
[   12.761076]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[   12.761085]   domain 1: span 0-1 level MC
[   12.761089]    groups: 0-1 (cpu_power = 1178)
[   12.761096] CPU1 attaching sched-domain:
[   12.761099]  domain 0: span 0-1 level SIBLING
[   12.761102]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[   12.761109]   domain 1: span 0-1 level MC
[   12.761113]    groups: 0-1 (cpu_power = 1178)
[   12.807405] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[   12.808321] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[   15.862795] CPU0 attaching NULL sched-domain.
[   15.862806] CPU1 attaching NULL sched-domain.
[   15.881131] CPU0 attaching sched-domain:
[   15.881140]  domain 0: span 0-1 level SIBLING
[   15.881145]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[   15.881157]   domain 1: span 0-1 level MC
[   15.881162]    groups: 0-1 (cpu_power = 1178)
[   15.881173] CPU1 attaching sched-domain:
[   15.881178]  domain 0: span 0-1 level SIBLING
[   15.881183]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[   15.881194]   domain 1: span 0-1 level MC
[   15.881199]    groups: 0-1 (cpu_power = 1178)
[ 2528.456019] usb 1-8: new high speed USB device using ehci_hcd and address 3
[ 2528.589112] usb 1-8: configuration #1 chosen from 1 choice
[ 2528.648157] Initializing USB Mass Storage driver...
[ 2528.648397] scsi2 : SCSI emulation for USB Mass Storage devices
[ 2528.648578] usbcore: registered new interface driver usb-storage
[ 2528.648587] USB Mass Storage support registered.
[ 2528.654089] usb-storage: device found at 3
[ 2528.654094] usb-storage: waiting for device to settle before scanning
[ 2533.656241] usb-storage: device scan complete
[ 2533.657210] scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer Edge      1.26 PQ: 0 ANSI: 5
[ 2533.658009] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2533.663762] sd 2:0:0:0: [sdb] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[ 2533.666089] sd 2:0:0:0: [sdb] Write Protect is off
[ 2533.666097] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2533.666102] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 2533.670565] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 2533.670575]  sdb: sdb1
[ 2533.679829] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 2533.679839] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 2683.043665] usb 1-8: USB disconnect, address 3
[ 2713.180023] usb 1-8: new high speed USB device using ehci_hcd and address 4
[ 2713.313097] usb 1-8: configuration #1 chosen from 1 choice
[ 2713.314007] scsi3 : SCSI emulation for USB Mass Storage devices
[ 2713.315309] usb-storage: device found at 4
[ 2713.315313] usb-storage: waiting for device to settle before scanning
[ 2718.312241] usb-storage: device scan complete
[ 2718.313219] scsi 3:0:0:0: Direct-Access     SanDisk  Cruzer Edge      1.26 PQ: 0 ANSI: 5
[ 2718.314017] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2718.322352] sd 3:0:0:0: [sdb] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[ 2718.325201] sd 3:0:0:0: [sdb] Write Protect is off
[ 2718.325210] sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2718.325216] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 2718.328688] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 2718.328696]  sdb: sdb1
[ 2718.337951] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 2718.337961] sd 3:0:0:0: [sdb] Attached SCSI removable disk



dmesg | tail

Kod Seç Genişlet

[ 2718.313219] scsi 3:0:0:0: Direct-Access     SanDisk  Cruzer Edge      1.26 PQ: 0 ANSI: 5
[ 2718.314017] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2718.322352] sd 3:0:0:0: [sdb] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[ 2718.325201] sd 3:0:0:0: [sdb] Write Protect is off
[ 2718.325210] sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2718.325216] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 2718.328688] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 2718.328696]  sdb: sdb1
[ 2718.337951] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 2718.337961] sd 3:0:0:0: [sdb] Attached SCSI removable disk


[heartsmagic]

Eski makinelere yeni sürümler olmaz gözüyle yaklaşmamak lazım. Zira, desteği biten bir sürüm hem işe yaramaz fazlaca hem de sorunlarını çözmek çok zor olur. Yeni sürümlerden hafif masaüstüne sahip olanları deneyebilirsin. Örneğin Lubuntu, Xubuntu gibi. Olmadı Gnome "fallback" denilen, biraz daha eski sürüme benzeyen kabuğu bile kullanabilirsin.