Usb fare ve klavye sorunu

Başlatan ardak, 14 Eylül 2014 - 17:12:03

« önceki - sonraki »

0 Üyeler ve 2 Ziyaretçi konuyu incelemekte.

ardak

Merhaba ubuntu kullanmaya yeni başladım ve  bir kaç problem le karşılaştım

1-Ubuntuyu açtığımda fareyi hareket ettiremiyorum ne zaman chrome, steam,vs.. bunun gibi programları açıyorum işte o zaman fare yi kullana biliyorum, bu problem ile ilgili bir araştırma yaptım , bir kaç tane kod buldum ve önyükleme zamanı ile alakalı olduğunu düşünüyorum. çıktıları söyle
çalışmadığı zaman:
[    3.772332] brd: module loaded
[    3.772923] loop: module loaded
[    3.773250] libphy: Fixed MDIO Bus: probed
[    3.773320] tun: Universal TUN/TAP device driver, 1.6
[    3.773321] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    3.773406] PPP generic driver version 2.4.2
[    3.773459] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.773473] ehci-pci: EHCI PCI platform driver
[    3.773619] ehci-pci 0000:00:12.2: EHCI Host Controller
[    3.773624] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    3.773628] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.773639] ehci-pci 0000:00:12.2: debug port 1
[    3.773686] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
[    3.785367] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    3.785422] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.785424] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.785426] usb usb1: Product: EHCI Host Controller
[    3.785427] usb usb1: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
[    3.785428] usb usb1: SerialNumber: 0000:00:12.2
[    3.785554] hub 1-0:1.0: USB hub found
[    3.785560] hub 1-0:1.0: 6 ports detected
[    3.785778] ehci-pci 0000:00:13.2: EHCI Host Controller
[    3.785782] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    3.785786] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.785796] ehci-pci 0000:00:13.2: debug port 1
[    3.785841] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
[    3.797349] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    3.797394] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.797396] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.797397] usb usb2: Product: EHCI Host Controller
[    3.797399] usb usb2: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
[    3.797400] usb usb2: SerialNumber: 0000:00:13.2
[    3.797523] hub 2-0:1.0: USB hub found
[    3.797528] hub 2-0:1.0: 6 ports detected
[    3.797632] ehci-platform: EHCI generic platform driver
[    3.797642] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.797643] ohci-pci: OHCI PCI platform driver
[    3.797767] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    3.797771] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    3.797801] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
[    3.857269] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.857272] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.857274] usb usb3: Product: OHCI PCI host controller
[    3.857275] usb usb3: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[    3.857277] usb usb3: SerialNumber: 0000:00:12.0
[    3.857411] hub 3-0:1.0: USB hub found
[    3.857418] hub 3-0:1.0: 3 ports detected
[    3.857611] ohci-pci 0000:00:12.1: OHCI PCI host controller
[    3.857617] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[    3.857631] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
[    3.917187] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.917190] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.917192] usb usb4: Product: OHCI PCI host controller
[    3.917193] usb usb4: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[    3.917194] usb usb4: SerialNumber: 0000:00:12.1
[    3.917327] hub 4-0:1.0: USB hub found
[    3.917335] hub 4-0:1.0: 3 ports detected
[    3.917525] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    3.917530] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    3.917559] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
[    3.977093] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    3.977097] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.977098] usb usb5: Product: OHCI PCI host controller
[    3.977100] usb usb5: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[    3.977101] usb usb5: SerialNumber: 0000:00:13.0
[    3.977236] hub 5-0:1.0: USB hub found
[    3.977244] hub 5-0:1.0: 3 ports detected
[    3.977436] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    3.977441] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[    3.977455] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
[    4.037011] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    4.037014] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.037016] usb usb6: Product: OHCI PCI host controller
[    4.037018] usb usb6: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[    4.037019] usb usb6: SerialNumber: 0000:00:13.1
[    4.037153] hub 6-0:1.0: USB hub found
[    4.037160] hub 6-0:1.0: 3 ports detected
[    4.037349] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    4.037354] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[    4.037369] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
[    4.096934] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    4.096937] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.096938] usb usb7: Product: OHCI PCI host controller
[    4.096940] usb usb7: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[    4.096941] usb usb7: SerialNumber: 0000:00:14.5
[    4.097077] hub 7-0:1.0: USB hub found
[    4.097086] hub 7-0:1.0: 2 ports detected
[    4.097155] ohci-platform: OHCI generic platform driver
[    4.097164] uhci_hcd: USB Universal Host Controller Interface driver
[    4.097214] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    4.097215] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    4.097356] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.097440] mousedev: PS/2 mouse device common for all mice
[    4.097540] rtc_cmos 00:04: RTC can wake from S4
[    4.097641] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    4.097673] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
[    4.097733] device-mapper: uevent: version 1.0.3
[    4.097791] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    4.097797] ledtrig-cpu: registered to indicate activity on CPUs
[    4.097888] TCP: cubic registered
[    4.097960] NET: Registered protocol family 10
[    4.098106] NET: Registered protocol family 17
[    4.098114] Key type dns_resolver registered
[    4.098375] Loading compiled-in X.509 certificates
[    4.099308] Loaded X.509 cert 'Magrathea: Glacier signing key: b1414ae96c1b0ebb7c141fa405c1f6c98e8a66f0'
[    4.099319] registered taskstats version 1
[    4.101361] Key type trusted registered
[    4.103022] Key type encrypted registered
[    4.104713] AppArmor: AppArmor sha1 policy hashing enabled
[    4.104718] IMA: No TPM chip found, activating TPM-bypass!
[    4.104945] regulator-dummy: disabling
[    4.105008]   Magic number: 14:497:624
[    4.105105] rtc_cmos 00:04: setting system clock to 2014-09-14 08:36:32 UTC (1410683792)
[    4.105198] acpi-cpufreq: overriding BIOS provided _PSD data
[    4.105293] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.105294] EDD information not available.
[    4.105316] PM: Hibernation image not present or could not be loaded.
[    4.106598] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
[    4.106601] Write protecting the kernel read-only data: 12288k
[    4.108672] Freeing unused kernel memory: 808K (ffff880001736000 - ffff880001800000)
[    4.110389] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    4.121890] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    4.123431] systemd-udevd[122]: starting version 204
[    4.135534] Floppy drive(s): fd0 is 1.44M
[    4.140497] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.140509] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    4.140705] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[    4.140863] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc9000063c000, 6c:f0:49:03:07:a4, XID 1c4000c0 IRQ 42
[    4.140865] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    4.144375] ahci 0000:00:11.0: version 3.0
[    4.144585] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    4.144588] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[    4.145132] scsi0 : ahci
[    4.145239] scsi1 : ahci
[    4.145323] scsi2 : ahci
[    4.145396] scsi3 : ahci
[    4.145434] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[    4.145437] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[    4.145439] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[    4.145441] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[    4.149213] scsi4 : pata_atiixp
[    4.149431] scsi5 : pata_atiixp
[    4.149499] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[    4.149501] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[    4.152658] FDC 0 is a post-1991 82077
[    4.204805] firewire_ohci 0000:03:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    4.356598] usb 1-5: new high-speed USB device number 3 using ehci-pci
[    4.464444] ata1: SATA link down (SStatus 0 SControl 300)
[    4.464483] ata2: SATA link down (SStatus 0 SControl 300)
[    4.464526] ata3: SATA link down (SStatus 0 SControl 300)
[    4.504503] usb 1-5: New USB device found, idVendor=0411, idProduct=01a2
[    4.504507] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.504509] usb 1-5: Product: 802.11 n WLAN
[    4.504511] usb 1-5: Manufacturer: Ralink
[    4.504512] usb 1-5: SerialNumber: 1.0
[    4.636147] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.637202] ata4.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[    4.637206] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    4.638413] ata4.00: configured for UDMA/133
[    4.638603] scsi 3:0:0:0: Direct-Access     ATA      ST3500418AS      CC38 PQ: 0 ANSI: 5
[    4.638751] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    4.638808] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    4.638888] sd 3:0:0:0: [sda] Write Protect is off
[    4.638893] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.638934] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.690601]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    4.691142] sd 3:0:0:0: [sda] Attached SCSI disk
[    4.700037] tsc: Refined TSC clocksource calibration: 2913.162 MHz
[    4.704137] firewire_core 0000:03:0e.0: created device fw0: GUID 00e650f70000241d, S400
[    5.027576] usb 4-3: new full-speed USB device number 2 using ohci-pci
[    5.698715] Switched to clocksource tsc
[    5.748575] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    6.303350] random: init urandom read with 99 bits of entropy available
[    6.564068] init: plymouth-upstart-bridge main process (189) terminated with status 1
[    6.564080] init: plymouth-upstart-bridge main process ended, respawning
[    6.566322] init: plymouth-upstart-bridge main process (200) terminated with status 1
[    6.566334] init: plymouth-upstart-bridge main process ended, respawning
[    6.568532] init: plymouth-upstart-bridge main process (201) terminated with status 1
[    6.568543] init: plymouth-upstart-bridge main process ended, respawning
[    6.570756] init: plymouth-upstart-bridge main process (202) terminated with status 1
[    6.570768] init: plymouth-upstart-bridge main process ended, respawning
[    6.572974] init: plymouth-upstart-bridge main process (203) terminated with status 1
[    6.572986] init: plymouth-upstart-bridge main process ended, respawning
[    6.575203] init: plymouth-upstart-bridge main process (204) terminated with status 1
[    6.575214] init: plymouth-upstart-bridge main process ended, respawning
[    6.577436] init: plymouth-upstart-bridge main process (205) terminated with status 1
[    6.577448] init: plymouth-upstart-bridge main process ended, respawning
[    6.579643] init: plymouth-upstart-bridge main process (206) terminated with status 1
[    6.579655] init: plymouth-upstart-bridge main process ended, respawning
[    6.581879] init: plymouth-upstart-bridge main process (207) terminated with status 1
[    6.581890] init: plymouth-upstart-bridge main process ended, respawning
[    6.584065] init: plymouth-upstart-bridge main process (208) terminated with status 1
[    6.584077] init: plymouth-upstart-bridge main process ended, respawning
[    6.586268] init: plymouth-upstart-bridge main process (209) terminated with status 1
[    6.586277] init: plymouth-upstart-bridge respawning too fast, stopped
[    7.161151] random: nonblocking pool is initialized
[   15.812076] Adding 26709444k swap on /dev/sda5.  Priority:-1 extents:1 across:26709444k FS
[   15.998596] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.021966] systemd-udevd[311]: starting version 204
[   16.108988] wmi: Mapper loaded
[   16.112377] lp: driver loaded but no devices found
[   16.114254] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20131115/utaddress-251)
[   16.114262] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.115649] [drm] Initialized drm 1.1.0 20060810
[   16.116517] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   16.116582] sp5100_tco: PCI Revision ID: 0x3c
[   16.116600] sp5100_tco: failed to find MMIO address, giving up.
[   16.121132] ppdev: user-space parallel port driver
[   16.123935] parport_pc 00:09: reported by Plug and Play ACPI
[   16.123993] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   16.145252] [drm] radeon kernel modesetting enabled.
[   16.145317] checking generic (d0000000 3d0000) vs hw (d0000000 10000000)
[   16.145318] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[   16.145338] Console: switching to colour dummy device 80x25
[   16.148452] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68BE 0x1458:0x21D6).
[   16.148469] [drm] register mmio base: 0xFDFC0000
[   16.148471] [drm] register mmio size: 131072
[   16.148828] ATOM BIOS: GV
[   16.148883] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   16.148885] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[   16.148887] [drm] Detected VRAM RAM=1024M, BAR=256M
[   16.148888] [drm] RAM width 128bits DDR
[   16.149662] [TTM] Zone  kernel: Available graphics memory: 2022966 kiB
[   16.149666] [TTM] Initializing pool allocator
[   16.149670] [TTM] Initializing DMA pool allocator
[   16.149691] [drm] radeon: 1024M of VRAM memory ready
[   16.149692] [drm] radeon: 1024M of GTT memory ready.
[   16.149705] [drm] Loading JUNIPER Microcode
[   16.155131] MCE: In-kernel MCE decoding enabled.
[   16.157151] EDAC MC: Ver: 3.0.0
[   16.159606] AMD64 EDAC driver v3.4.0
[   16.159639] EDAC amd64: DRAM ECC disabled.
[   16.159645] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   16.159645]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   16.159645]  (Note that use of the override may cause unknown side effects.)
[   16.171960] type=1400 audit(1410673004.581:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=387 comm="apparmor_parser"
[   16.171968] type=1400 audit(1410673004.581:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=387 comm="apparmor_parser"
[   16.171971] type=1400 audit(1410673004.581:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=387 comm="apparmor_parser"
[   16.172389] type=1400 audit(1410673004.581:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=387 comm="apparmor_parser"
[   16.172393] type=1400 audit(1410673004.581:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=387 comm="apparmor_parser"
[   16.172611] type=1400 audit(1410673004.581:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=387 comm="apparmor_parser"
[   16.200019] kvm: disabled by bios
[   16.208647] hda-intel 0000:00:14.2: Using LPIB position fix
[   16.214386] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[   16.219649] lp0: using parport0 (interrupt-driven).
[   16.224011] SKU: Nid=0x1d sku_cfg=0x4005e601
[   16.224015] SKU: port_connectivity=0x1
[   16.224016] SKU: enable_pcbeep=0x0
[   16.224017] SKU: check_sum=0x00000005
[   16.224018] SKU: customization=0x000000e6
[   16.224018] SKU: external_amp=0x0
[   16.224019] SKU: platform_type=0x0
[   16.224020] SKU: swap=0x0
[   16.224021] SKU: override=0x1
[   16.225122] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   16.225123]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.225124]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   16.225124]    mono: mono_out=0x0
[   16.225125]    dig-out=0x1e/0x0
[   16.225125]    inputs:
[   16.225126]      Front Mic=0x19
[   16.225127]      Rear Mic=0x18
[   16.225127]      Line=0x1a
[   16.225128]    dig-in=0x1f
[   16.225129] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[   16.225138] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0885
[   16.249742] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[   16.249872] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[   16.249954] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[   16.250025] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[   16.250138] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[   16.250313] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[   16.250409] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[   16.250488] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[   16.280180] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   16.281711] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[   16.291731] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[   16.291840] radeon 0000:01:00.0: WB enabled
[   16.291844] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800b7674c00
[   16.291846] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800b7674c0c
[   16.292263] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9001199c418
[   16.292265] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   16.292266] [drm] Driver supports precise vblank timestamp query.
[   16.292286] radeon 0000:01:00.0: irq 43 for MSI/MSI-X
[   16.292297] radeon 0000:01:00.0: radeon: using MSI.
[   16.292318] [drm] radeon: irq initialized.
[   16.308406] [drm] ring test on 0 succeeded in 1 usecs
[   16.308462] [drm] ring test on 3 succeeded in 1 usecs
[   16.474260] cfg80211: Calling CRDA to update world regulatory domain
[   16.503797] [drm] ring test on 5 succeeded in 1 usecs
[   16.503803] [drm] UVD initialized successfully.
[   16.503908] [drm] Enabling audio 0 support
[   16.503932] [drm] ib test on ring 0 succeeded in 0 usecs
[   16.503952] [drm] ib test on ring 3 succeeded in 0 usecs
[   16.576816] cfg80211: World regulatory domain updated:
[   16.576821] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   16.576823] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.576824] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.576825] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.576827] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.576828] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.673783] [drm] ib test on ring 5 succeeded
[   16.674204] [drm] Radeon Display Connectors
[   16.674206] [drm] Connector 0:
[   16.674207] [drm]   DP-1
[   16.674208] [drm]   HPD4
[   16.674210] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   16.674211] [drm]   Encoders:
[   16.674212] [drm]     DFP1: INTERNAL_UNIPHY2
[   16.674213] [drm] Connector 1:
[   16.674214] [drm]   HDMI-A-1
[   16.674214] [drm]   HPD5
[   16.674216] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   16.674216] [drm]   Encoders:
[   16.674217] [drm]     DFP2: INTERNAL_UNIPHY2
[   16.674218] [drm] Connector 2:
[   16.674219] [drm]   DVI-I-1
[   16.674220] [drm]   HPD1
[   16.674221] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[   16.674222] [drm]   Encoders:
[   16.674223] [drm]     DFP3: INTERNAL_UNIPHY1
[   16.674223] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   16.674224] [drm] Connector 3:
[   16.674225] [drm]   DVI-I-2
[   16.674226] [drm]   HPD6
[   16.674227] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[   16.674228] [drm]   Encoders:
[   16.674229] [drm]     DFP4: INTERNAL_UNIPHY
[   16.674230] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   16.674267] [drm] Internal thermal controller with fan control
[   16.677289] [drm] radeon: dpm initialized
[   16.726386] [drm] fb mappable at 0xD045E000
[   16.726389] [drm] vram apper at 0xD0000000
[   16.726390] [drm] size 5324800
[   16.726391] [drm] fb depth is 24
[   16.726392] [drm]    pitch is 5888
[   16.726495] fbcon: radeondrmfb (fb0) is primary device
[   16.735149] Console: switching to colour frame buffer device 180x56
[   16.738877] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   16.738879] radeon 0000:01:00.0: registered panic notifier
[   16.738884] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[   16.738999] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   16.739003] hda-intel 0000:01:00.1: Using LPIB position fix
[   16.739046] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
[   16.741476] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[   16.744800] HDMI ATI/AMD: no speaker allocation for ELD
[   16.744877] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[   16.784190] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   17.069623] init: failsafe main process (638) killed by TERM signal
[   17.300886] type=1400 audit(1410673005.709:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=722 comm="apparmor_parser"
[   17.300894] type=1400 audit(1410673005.709:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=722 comm="apparmor_parser"
[   17.301308] type=1400 audit(1410673005.709:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=722 comm="apparmor_parser"
[   17.304090] Bluetooth: Core ver 2.17
[   17.304126] NET: Registered protocol family 31
[   17.304128] Bluetooth: HCI device and connection manager initialized
[   17.304140] Bluetooth: HCI socket layer initialized
[   17.304143] Bluetooth: L2CAP socket layer initialized
[   17.304146] Bluetooth: SCO socket layer initialized
[   17.306940] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.306945] Bluetooth: BNEP filters: protocol multicast
[   17.306954] Bluetooth: BNEP socket layer initialized
[   17.308003] Bluetooth: RFCOMM TTY layer initialized
[   17.308016] Bluetooth: RFCOMM socket layer initialized
[   17.308025] Bluetooth: RFCOMM ver 1.11
[   17.321970] init: avahi-cups-reload main process (712) terminated with status 1
[   17.926176] r8169 0000:02:00.0 eth0: link down
[   17.926217] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.926480] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.366287] type=1400 audit(1410673006.777:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=756 comm="apparmor_parser"
[   20.141727] usb 4-3: device descriptor read/64, error -110
[   31.443227] vboxdrv: module verification failed: signature and/or  required key missing - tainting kernel
[   31.445846] vboxdrv: Found 4 processor cores.
[   31.446068] vboxdrv: fAsync=0 offMin=0x4b8 offMax=0x2f7a
[   31.446143] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   31.446144] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
[   31.463792] vboxpci: IOMMU not found (not registered)
[   31.583129] init: plymouth-stop pre-start process (2292) terminated with status 1
[   35.359665] usb 4-3: device descriptor read/64, error -110
[   35.575403] usb 1-5: reset high-speed USB device number 3 using ehci-pci
[   35.716328] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[   35.744409] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[   35.748399] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   35.748675] usbcore: registered new interface driver rt2800usb
[   35.751374] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[   35.762786] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[   35.842977] usb 4-3: new full-speed USB device number 3 using ohci-pci
[   36.198280] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   36.198583] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   37.522982] wlan0: authenticate with 18:28:61:0f:b0:4d
[   37.568202] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[   37.569822] wlan0: authenticated
[   37.572499] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[   37.575658] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[   37.582386] wlan0: associated
[   37.582425] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   50.957088] usb 4-3: device descriptor read/64, error -110
arda@Varda:~$


Çalıştığı zaman :

[  119.482858] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  119.549119] cfg80211: Calling CRDA to update world regulatory domain
[  119.553953] cfg80211: World regulatory domain updated:
[  119.553959] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  119.553962] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  119.553965] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  119.553967] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  119.553969] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  119.553971] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  133.545709] wlan0: authenticate with 18:28:61:0f:b0:4d
[  133.591628] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  133.593716] wlan0: authenticated
[  133.597815] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  133.601158] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  133.607941] wlan0: associated
[  133.618838] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  133.685389] cfg80211: Calling CRDA to update world regulatory domain
[  133.689705] cfg80211: World regulatory domain updated:
[  133.689710] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  133.689713] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  133.689715] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  133.689716] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  133.689718] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  133.689720] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  143.050560] wlan0: authenticate with 18:28:61:0f:b0:4d
[  143.080931] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  143.082776] wlan0: authenticated
[  143.087079] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  143.090300] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  143.097226] wlan0: associated
[  143.109012] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  143.174681] cfg80211: Calling CRDA to update world regulatory domain
[  143.182515] cfg80211: World regulatory domain updated:
[  143.182525] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  143.182532] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  143.182538] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  143.182543] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  143.182547] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  143.182552] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  157.156121] wlan0: authenticate with 18:28:61:0f:b0:4d
[  157.208780] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  157.210367] wlan0: authenticated
[  157.210901] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  157.214490] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  157.221388] wlan0: associated
[  157.232115] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  157.298409] cfg80211: Calling CRDA to update world regulatory domain
[  157.304846] cfg80211: World regulatory domain updated:
[  157.304852] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  157.304855] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  157.304858] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  157.304860] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  157.304862] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  157.304865] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  164.900735] systemd-hostnamed[3020]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[  170.089978] wlan0: authenticate with 18:28:61:0f:b0:4d
[  170.119094] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  170.120715] wlan0: authenticated
[  170.124861] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  170.128627] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  170.135575] wlan0: associated
[  170.147943] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  170.212013] cfg80211: Calling CRDA to update world regulatory domain
[  170.218539] cfg80211: World regulatory domain updated:
[  170.218549] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  170.218556] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  170.218562] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  170.218567] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  170.218572] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  170.218576] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  184.212820] wlan0: authenticate with 18:28:61:0f:b0:4d
[  184.258522] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  184.260746] wlan0: authenticated
[  184.264633] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  184.267883] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  184.274688] wlan0: associated
[  184.287337] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  184.351494] cfg80211: Calling CRDA to update world regulatory domain
[  184.359486] cfg80211: World regulatory domain updated:
[  184.359496] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  184.359503] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  184.359509] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  184.359514] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  184.359518] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  184.359523] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  195.128878] wlan0: authenticate with 18:28:61:0f:b0:4d
[  195.158092] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  195.159888] wlan0: authenticated
[  195.163831] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  195.167024] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  195.173986] wlan0: associated
[  195.183865] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  195.251450] cfg80211: Calling CRDA to update world regulatory domain
[  195.258032] cfg80211: World regulatory domain updated:
[  195.258042] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  195.258049] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  195.258055] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  195.258060] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  195.258064] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  195.258069] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  209.231649] wlan0: authenticate with 18:28:61:0f:b0:4d
[  209.277411] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  209.279041] wlan0: authenticated
[  209.279572] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  209.282917] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  209.289835] wlan0: associated
[  209.301129] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  209.367160] cfg80211: Calling CRDA to update world regulatory domain
[  209.373283] cfg80211: World regulatory domain updated:
[  209.373289] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  209.373292] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  209.373295] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  209.373297] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  209.373299] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  209.373301] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  220.166300] wlan0: authenticate with 18:28:61:0f:b0:4d
[  220.200689] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  220.202289] wlan0: authenticated
[  220.202813] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  220.206069] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  220.212899] wlan0: associated
[  220.223550] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  220.290096] cfg80211: Calling CRDA to update world regulatory domain
[  220.294257] cfg80211: World regulatory domain updated:
[  220.294263] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  220.294267] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  220.294269] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  220.294272] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  220.294274] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  220.294276] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  234.278675] wlan0: authenticate with 18:28:61:0f:b0:4d
[  234.324473] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  234.326067] wlan0: authenticated
[  234.326572] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  234.329847] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  234.336636] wlan0: associated
[  234.348779] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  234.414212] cfg80211: Calling CRDA to update world regulatory domain
[  234.421417] cfg80211: World regulatory domain updated:
[  234.421427] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  234.421434] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  234.421440] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  234.421444] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  234.421449] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  234.421453] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  245.195812] wlan0: authenticate with 18:28:61:0f:b0:4d
[  245.224342] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  245.225950] wlan0: authenticated
[  245.229837] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  245.233133] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  245.239941] wlan0: associated
[  245.250475] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  245.317527] cfg80211: Calling CRDA to update world regulatory domain
[  245.324746] cfg80211: World regulatory domain updated:
[  245.324756] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  245.324763] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  245.324769] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  245.324774] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  245.324778] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  245.324783] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  259.309697] wlan0: authenticate with 18:28:61:0f:b0:4d
[  259.355508] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  259.357085] wlan0: authenticated
[  259.357569] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  259.360828] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  259.367930] wlan0: associated
[  259.378463] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  259.445231] cfg80211: Calling CRDA to update world regulatory domain
[  259.452448] cfg80211: World regulatory domain updated:
[  259.452458] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  259.452465] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  259.452471] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  259.452476] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  259.452480] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  259.452484] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  270.252016] wlan0: authenticate with 18:28:61:0f:b0:4d
[  270.282719] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  270.284438] wlan0: authenticated
[  270.284830] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  270.288076] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  270.294882] wlan0: associated
[  270.305184] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  270.372473] cfg80211: Calling CRDA to update world regulatory domain
[  270.379841] cfg80211: World regulatory domain updated:
[  270.379852] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  270.379858] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  270.379864] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  270.379869] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  270.379874] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  270.379878] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  284.364399] wlan0: authenticate with 18:28:61:0f:b0:4d
[  284.410438] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  284.412033] wlan0: authenticated
[  284.412612] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  284.415818] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  284.422628] wlan0: associated
[  284.433271] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  284.500197] cfg80211: Calling CRDA to update world regulatory domain
[  284.507445] cfg80211: World regulatory domain updated:
[  284.507455] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  284.507462] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  284.507468] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  284.507474] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  284.507478] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  284.507483] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  477.931106] wlan0: authenticate with 18:28:61:0f:b0:4d
[  477.977064] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  477.978798] wlan0: authenticated
[  477.979147] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  477.982437] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  477.989221] wlan0: associated
[  477.999773] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  478.066816] cfg80211: Calling CRDA to update world regulatory domain
[  478.073009] cfg80211: World regulatory domain updated:
[  478.073015] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  478.073018] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  478.073021] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  478.073023] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  478.073025] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  478.073027] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  492.058917] wlan0: authenticate with 18:28:61:0f:b0:4d
[  492.104796] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  492.106371] wlan0: authenticated
[  492.106928] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  492.110142] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  492.116974] wlan0: associated
[  494.377986] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  494.446023] cfg80211: Calling CRDA to update world regulatory domain
[  494.452332] cfg80211: World regulatory domain updated:
[  494.452342] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  494.452349] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  494.452355] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  494.452360] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  494.452365] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  494.452369] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  502.132790] wlan0: authenticate with 18:28:61:0f:b0:4d
[  502.178865] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  502.180557] wlan0: authenticated
[  502.180959] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  502.184725] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  502.191534] wlan0: associated
[  502.203178] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  502.267835] cfg80211: Calling CRDA to update world regulatory domain
[  502.271180] cfg80211: World regulatory domain updated:
[  502.271185] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  502.271187] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  502.271188] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  502.271190] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  502.271191] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  502.271192] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  516.260693] wlan0: authenticate with 18:28:61:0f:b0:4d
[  516.306587] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  516.308174] wlan0: authenticated
[  516.308727] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  516.311975] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  516.318765] wlan0: associated
[  516.329440] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  516.395578] cfg80211: Calling CRDA to update world regulatory domain
[  516.401823] cfg80211: World regulatory domain updated:
[  516.401827] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  516.401830] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  516.401832] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  516.401834] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  516.401836] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  516.401837] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  526.600486] wlan0: authenticate with 18:28:61:0f:b0:4d
[  526.628940] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  526.630810] wlan0: authenticated
[  526.631147] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  526.634610] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  526.641417] wlan0: associated
[  526.652812] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  526.718873] cfg80211: Calling CRDA to update world regulatory domain
[  526.724408] cfg80211: World regulatory domain updated:
[  526.724414] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  526.724417] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  526.724420] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  526.724422] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  526.724424] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  526.724426] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  540.707034] wlan0: authenticate with 18:28:61:0f:b0:4d
[  540.752733] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  540.754307] wlan0: authenticated
[  540.754904] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  540.758100] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  540.765031] wlan0: associated
[  541.119065] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  541.183069] cfg80211: Calling CRDA to update world regulatory domain
[  541.189976] cfg80211: World regulatory domain updated:
[  541.189987] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  541.189994] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  541.189999] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  541.190004] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  541.190009] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  541.190013] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  551.624312] wlan0: authenticate with 18:28:61:0f:b0:4d
[  551.652034] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  551.653749] wlan0: authenticated
[  551.654110] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  551.657885] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  551.664690] wlan0: associated
[  551.676953] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  551.741002] cfg80211: Calling CRDA to update world regulatory domain
[  551.748928] cfg80211: World regulatory domain updated:
[  551.748938] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  551.748945] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  551.748951] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  551.748956] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  551.748960] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  551.748965] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  565.721826] wlan0: authenticate with 18:28:61:0f:b0:4d
[  565.767741] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[  565.769679] wlan0: authenticated
[  565.773884] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[  565.780740] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=3)
[  565.787542] wlan0: associated
[  565.802862] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=1)
[  565.869513] cfg80211: Calling CRDA to update world regulatory domain
[  565.875573] cfg80211: World regulatory domain updated:
[  565.875579] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  565.875582] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  565.875585] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  565.875587] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  565.875590] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  565.875592] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  682.292653] type=1400 audit(1410669637.719:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3408 comm="apparmor_parser"
[  682.292663] type=1400 audit(1410669637.719:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3408 comm="apparmor_parser"
[  682.293141] type=1400 audit(1410669637.723:75): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3408 comm="apparmor_parser"
arda@Varda:~$



2-internet problemi ; bağzen çalışıyo bağzen çalışmıyor, kablosuz adoptör kullanıyorum ve ssid ye bağlanıyor diyor ama bağlanamıyor 2 veya 3 dk bağlanıyor dedikten sonra çevrim dışısınız diyor ,i bununlada ilgili bir araştırma yaptım ama bir çözüm bulamadım

arda@Varda:~$ iwconfig
eth0      no wireless extensions.

lo        no wireless extensions.

wlan0     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:on
         
arda@Varda:~$ sudo iwlist scan
[sudo] password for arda:
eth0      Interface doesn't support scanning.

lo        Interface doesn't support scanning.

wlan0     Scan completed :
          Cell 01 - Address: 18:28:61:0F:B0:4D
                    Channel:8
                    Frequency:2.447 GHz (Channel 8)
                    Quality=47/70  Signal level=-63 dBm 
                    Encryption key:on
                    ESSID:"arda"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=00000012f0c1a54c
                    Extra: Last beacon: 48ms ago
                    IE: Unknown: 000461726461
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 030108
                    IE: Unknown: 2A0100
                    IE: Unknown: 2F0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32040C121860
                    IE: Unknown: 2D1A6C181BFF00000000000000000000000000000000000000000000
                    IE: Unknown: 3D1608080400000000000000000000000000000000000000
                    IE: Unknown: 4A0E14000A002C01C800140005001900
                    IE: Unknown: 7F0101
                    IE: Unknown: DD090010180202F0040000
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00

arda@Varda:~$ lsmod
Module                  Size  Used by
ctr                    13049  0
ccm                    17773  0
joydev                 17381  0
hid_generic            12548  0
usbhid                 52570  0
hid                   106148  2 hid_generic,usbhid
arc4                   12608  0
pci_stub               12622  1
vboxpci                23194  0
vboxnetadp             25670  0
vboxnetflt             27613  0
vboxdrv               339502  3 vboxnetadp,vboxnetflt,vboxpci
bnep                   19624  2
rfcomm                 69160  0
bluetooth             391136  10 bnep,rfcomm
snd_hda_codec_hdmi     46368  1
rt2800usb              27034  0
rt2x00usb              20742  1 rt2800usb
rt2800lib              89076  1 rt2800usb
rt2x00lib              55307  3 rt2x00usb,rt2800lib,rt2800usb
mac80211              630653  3 rt2x00lib,rt2x00usb,rt2800lib
cfg80211              484040  2 mac80211,rt2x00lib
crc_ccitt              12707  1 rt2800lib
snd_hda_codec_realtek    65580  1
snd_hda_intel          56451  5
snd_hda_codec         192906  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep              13602  1 snd_hda_codec
snd_pcm               102099  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
snd_seq_midi           13324  0
snd_seq_midi_event     14899  1 snd_seq_midi
snd_rawmidi            30144  1 snd_seq_midi
snd_seq                61560  2 snd_seq_midi_event,snd_seq_midi
kvm                   451511  0
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              29482  2 snd_pcm,snd_seq
k10temp                13126  0
serio_raw              13462  0
edac_core              62291  0
edac_mce_amd           22617  0
snd                    69322  21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
sp5100_tco             13979  0
i2c_piix4              22155  0
radeon               1522474  4
soundcore              12680  1 snd
ttm                    85115  1 radeon
drm_kms_helper         53081  1 radeon
drm                   303102  6 ttm,drm_kms_helper,radeon
mac_hid                13205  0
wmi                    19177  0
i2c_algo_bit           13413  1 radeon
parport_pc             32701  1
ppdev                  17671  0
lp                     17759  0
parport                42348  3 lp,ppdev,parport_pc
pata_acpi              13038  0
firewire_ohci          40409  0
firewire_core          68769  1 firewire_ohci
crc_itu_t              12707  1 firewire_core
pata_atiixp            13271  0
ahci                   25819  3
r8169                  67581  0
libahci                32716  1 ahci
mii                    13934  1 r8169
floppy                 69418  0

arda@Varda:~$ sudo iwlist scan
eth0      Interface doesn't support scanning.

lo        Interface doesn't support scanning.

wlan0     Scan completed :
          Cell 01 - Address: 18:28:61:0F:B0:4D
                    Channel:8
                    Frequency:2.447 GHz (Channel 8)
                    Quality=45/70  Signal level=-65 dBm 
                    Encryption key:on
                    ESSID:"arda"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=00000012f525d004
                    Extra: Last beacon: 48ms ago
                    IE: Unknown: 000461726461
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 030108
                    IE: Unknown: 2A0100
                    IE: Unknown: 2F0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32040C121860
                    IE: Unknown: 2D1A6C181BFF00000000000000000000000000000000000000000000
                    IE: Unknown: 3D1608080400000000000000000000000000000000000000
                    IE: Unknown: 4A0E14000A002C01C800140005001900
                    IE: Unknown: 7F0101
                    IE: Unknown: DD090010180202F0040000
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
          Cell 02 - Address: A0:F3:C1:53:34:9F
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    Quality=43/70  Signal level=-67 dBm 
                    Encryption key:on
                    ESSID:""
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000642f88c3f0
                    Extra: Last beacon: 1312ms ago
                    IE: Unknown: 0000
                    IE: Unknown: 010882848B960C121824
                    IE: Unknown: 030101
                    IE: Unknown: 050400010000
                    IE: Unknown: 0706555320010B1B
                    IE: Unknown: 2A0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32043048606C
                    IE: Unknown: 2D1A2C0003FF00000000000000000000000000000000000000000000
                    IE: Unknown: 3D1601080000000000000000000000000000000000000000
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD180050F2020101010003A4000027A4000042435E0062322F00
                    IE: Unknown: DD0900037F01010000FF7F

arda@Varda:~$ sudo rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
arda@Varda:~$



Bğlandığında(şansa göre değişiyor : )

arda@Varda:~$ iwconfig
eth0      no wireless extensions.

lo        no wireless extensions.

wlan0     IEEE 802.11bgn  ESSID:"arda" 
          Mode:Managed  Frequency:2.447 GHz  Access Point: 18:28:61:0F:B0:4D   
          Bit Rate=58.5 Mb/s   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:on
          Link Quality=51/70  Signal level=-59 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:22  Invalid misc:0   Missed beacon:0

arda@Varda:~$



3. problem bunu başıkta yazmadım ve şimdi fark ettim klavyeden köşeli parantez yapamıyorum


arda@Varda:~$ xinput list
⎡ Virtual core pointer                    id=2 [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              id=4 [slave  pointer  (2)]
⎜   ↳ A4TECH USB Device                        id=9 [slave  pointer  (2)]
⎜   ↳ A4TECH USB Device                        id=10 [slave  pointer  (2)]
⎣ Virtual core keyboard                    id=3 [master keyboard (2)]
    ↳ Virtual core XTEST keyboard              id=5 [slave  keyboard (3)]
    ↳ Power Button                            id=6 [slave  keyboard (3)]
    ↳ Power Button                            id=7 [slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard            id=8 [slave  keyboard (3)]


zaman ayırdığınız  için teşekkürler :)




1.Düzenleme: Güncelleme : klavyeden köşeli parantez yapamamamın nedeni ubuntu işletim sisteminin ctrl(+) alt (+)8 veya9 ile köşeli parantez e izin vermemesi dir , Alt Gr tuşu(+)8 veya 9 la köşeli parantez yapılabilinir.
"Benim gördüğüm bazı gerçekler bazı insanların kurduğu hayallerden daha gerçek." - Nihat Doğan

heartsmagic

Bu başlıkta sadece fare ve klavye sorununu konuşalım, kablosuz sorunun için yeni bir başlık aç lütfen. Ancak şuradaki tüm komut çıktılarını aktar lütfen: agkomut
lspci gibi komutların çıktısı yok örneğin bu başlıkta.

Bu klavye ve fare A4Tech'in hangi modelleri? Sistem başlangıcında takılı oluyorlar mı? Bir kere çıkartıp takınca tepki veriyorlar mı?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

ardak

Alıntı yapılan: heartsmagic - 14 Eylül 2014 - 20:41:40
Bu başlıkta sadece fare ve klavye sorununu konuşalım, kablosuz sorunun için yeni bir başlık aç lütfen. Ancak şuradaki tüm komut çıktılarını aktar lütfen: http://kb.ubuntu-tr.net/ag-komutlari
lspci gibi komutların çıktısı yok örneğin bu başlıkta.

Bu klavye ve fare A4Tech'in hangi modelleri? Sistem başlangıcında takılı oluyorlar mı? Bir kere çıkartıp takınca tepki veriyorlar mı?

Çıktılar:

1-cat /etc/lsb-release

arda@Varda:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=14.04
DISTRIB_CODENAME=trusty
DISTRIB_DESCRIPTION="Ubuntu 14.04.1 LTS"
arda@Varda:~$



2-uname -a

arda@Varda:~$ uname -a
Linux Varda 3.13.0-35-generic #62-Ubuntu SMP Fri Aug 15 01:58:42 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
arda@Varda:~$



3-lspci

arda@Varda:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 5)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Juniper PRO [Radeon HD 5750]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Juniper HDMI Audio [Radeon HD 5700 Series]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
03:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
arda@Varda:~$



4-lsusb

arda@Varda:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 05ac:12aa Apple, Inc. iPod Touch 5.Gen [A1421]
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0411:01a2 BUFFALO INC. (formerly MelCo., Inc.) WLI-UC-GNM Wireless LAN Adapter [Ralink RT8070]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 09da:9090 A4 Tech Co., Ltd XL-750BK Laser Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
arda@Varda:~$



5-rfkill list

arda@Varda:~$ rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
arda@Varda:~$



6-sudo lshw -C network

arda@Varda:~$ sudo lshw -C network
[sudo] password for arda:
  *-network               
       açıklama: Eternet interface
       ürün: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:02:00.0
       mantıksal ad: eth0
       sürüm: 02
       serial: 6c:f0:49:03:07:a4
       boyut: 10Mbit/s
       kapasite: 1Gbit/s
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress msix vpd bus_master cap_list rom eternet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       yapılandırma: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       kaynaklar: irq:42 ioport:de00(boyut=256) bellek:fdbff000-fdbfffff bellek:fdbe0000-fdbeffff bellek:fdb00000-fdb0ffff
  *-network
       açıklama: Kablosuz arayüz
       physical id: 1
       bus info: usb@1:5
       mantıksal ad: wlan0
       serial: 10:6f:3f:eb:61:25
       kapasiteler: eternet physical wireless
       yapılandırma: broadcast=yes driver=rt2800usb driverversion=3.13.0-35-generic firmware=0.29 ip=192.168.2.77 link=yes multicast=yes wireless=IEEE 802.11bgn
arda@Varda:~$



7-ifconfig

arda@Varda:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 6c:f0:49:03:07:a4 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:945 errors:0 dropped:0 overruns:0 frame:0
          TX packets:945 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:85306 (85.3 KB)  TX bytes:85306 (85.3 KB)

wlan0     Link encap:Ethernet  HWaddr 10:6f:3f:eb:61:25 
          inet addr:192.168.2.77  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::126f:3fff:feeb:6125/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2918 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2681 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:2437865 (2.4 MB)  TX bytes:505826 (505.8 KB)

arda@Varda:~$



8-iwconfig

arda@Varda:~$ iwconfig
eth0      no wireless extensions.

lo        no wireless extensions.

wlan0     IEEE 802.11bgn  ESSID:"arda" 
          Mode:Managed  Frequency:2.447 GHz  Access Point: 18:28:61:0F:B0:4D   
          Bit Rate=57.8 Mb/s   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:on
          Link Quality=43/70  Signal level=-67 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:126  Invalid misc:0   Missed beacon:0

arda@Varda:~$



9-iwlist scanning

arda@Varda:~$ iwlist scanning
eth0      Interface doesn't support scanning.

lo        Interface doesn't support scanning.

wlan0     Scan completed :
          Cell 01 - Address: 18:28:61:0F:B0:4D
                    Channel:8
                    Frequency:2.447 GHz (Channel 8)
                    Quality=41/70  Signal level=-69 dBm 
                    Encryption key:on
                    ESSID:"arda"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=0000000106398583
                    Extra: Last beacon: 2072ms ago
                    IE: Unknown: 000461726461
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 030108
                    IE: Unknown: 2A0100
                    IE: Unknown: 2F0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32040C121860
                    IE: Unknown: 2D1A6C181BFF00000000000000000000000000000000000000000000
                    IE: Unknown: 3D1608080400000000000000000000000000000000000000
                    IE: Unknown: 4A0E14000A002C01C800140005001900
                    IE: Unknown: 7F0101
                    IE: Unknown: DD090010180202F0040000
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00

arda@Varda:~$



10-lsmod

arda@Varda:~$ lsmod
Module                  Size  Used by
joydev                 17381  0
hid_generic            12548  0
usbhid                 52570  0
hid                   106148  2 hid_generic,usbhid
ctr                    13049  1
ccm                    17773  1
arc4                   12608  2
pci_stub               12622  1
vboxpci                23194  0
vboxnetadp             25670  0
vboxnetflt             27613  0
vboxdrv               339502  3 vboxnetadp,vboxnetflt,vboxpci
bnep                   19624  2
rfcomm                 69160  0
bluetooth             391136  10 bnep,rfcomm
snd_hda_codec_hdmi     46368  1
rt2800usb              27034  0
rt2x00usb              20742  1 rt2800usb
rt2800lib              89076  1 rt2800usb
rt2x00lib              55307  3 rt2x00usb,rt2800lib,rt2800usb
mac80211              630653  3 rt2x00lib,rt2x00usb,rt2800lib
cfg80211              484040  2 mac80211,rt2x00lib
crc_ccitt              12707  1 rt2800lib
snd_hda_codec_realtek    65580  1
snd_hda_intel          56451  5
snd_hda_codec         192906  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep              13602  1 snd_hda_codec
kvm                   451511  0
snd_seq_midi           13324  0
snd_seq_midi_event     14899  1 snd_seq_midi
snd_rawmidi            30144  1 snd_seq_midi
snd_seq                61560  2 snd_seq_midi_event,snd_seq_midi
snd_pcm               102099  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
serio_raw              13462  0
edac_core              62291  0
edac_mce_amd           22617  0
radeon               1522474  3
k10temp                13126  0
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
snd_timer              29482  2 snd_pcm,snd_seq
sp5100_tco             13979  0
i2c_piix4              22155  0
ttm                    85115  1 radeon
drm_kms_helper         53081  1 radeon
drm                   303102  5 ttm,drm_kms_helper,radeon
snd                    69322  21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
i2c_algo_bit           13413  1 radeon
soundcore              12680  1 snd
mac_hid                13205  0
parport_pc             32701  1
wmi                    19177  0
ppdev                  17671  0
lp                     17759  0
parport                42348  3 lp,ppdev,parport_pc
pata_acpi              13038  0
firewire_ohci          40409  0
firewire_core          68769  1 firewire_ohci
crc_itu_t              12707  1 firewire_core
r8169                  67581  0
pata_atiixp            13271  0
mii                    13934  1 r8169
ahci                   25819  3
libahci                32716  1 ahci
floppy                 69418  0
arda@Varda:~$



11-dmesg

[    4.180774] usb usb4: SerialNumber: 0000:00:12.1
[    4.180919] hub 4-0:1.0: USB hub found
[    4.180929] hub 4-0:1.0: 3 ports detected
[    4.181120] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    4.181125] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    4.181154] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
[    4.240850] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    4.240854] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.240855] usb usb5: Product: OHCI PCI host controller
[    4.240857] usb usb5: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[    4.240858] usb usb5: SerialNumber: 0000:00:13.0
[    4.240994] hub 5-0:1.0: USB hub found
[    4.241001] hub 5-0:1.0: 3 ports detected
[    4.241200] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    4.241205] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[    4.241219] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
[    4.300935] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    4.300938] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.300940] usb usb6: Product: OHCI PCI host controller
[    4.300941] usb usb6: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[    4.300943] usb usb6: SerialNumber: 0000:00:13.1
[    4.301077] hub 6-0:1.0: USB hub found
[    4.301085] hub 6-0:1.0: 3 ports detected
[    4.301274] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    4.301279] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[    4.301294] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
[    4.361028] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    4.361031] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.361033] usb usb7: Product: OHCI PCI host controller
[    4.361034] usb usb7: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[    4.361035] usb usb7: SerialNumber: 0000:00:14.5
[    4.361169] hub 7-0:1.0: USB hub found
[    4.361177] hub 7-0:1.0: 2 ports detected
[    4.361246] ohci-platform: OHCI generic platform driver
[    4.361255] uhci_hcd: USB Universal Host Controller Interface driver
[    4.361305] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    4.361307] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    4.361447] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.361521] mousedev: PS/2 mouse device common for all mice
[    4.361631] rtc_cmos 00:04: RTC can wake from S4
[    4.361732] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    4.361763] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
[    4.361823] device-mapper: uevent: version 1.0.3
[    4.361874] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    4.361881] ledtrig-cpu: registered to indicate activity on CPUs
[    4.361973] TCP: cubic registered
[    4.362045] NET: Registered protocol family 10
[    4.362192] NET: Registered protocol family 17
[    4.362201] Key type dns_resolver registered
[    4.362460] Loading compiled-in X.509 certificates
[    4.363395] Loaded X.509 cert 'Magrathea: Glacier signing key: b1414ae96c1b0ebb7c141fa405c1f6c98e8a66f0'
[    4.363406] registered taskstats version 1
[    4.365469] Key type trusted registered
[    4.367310] Key type encrypted registered
[    4.369039] AppArmor: AppArmor sha1 policy hashing enabled
[    4.369044] IMA: No TPM chip found, activating TPM-bypass!
[    4.369260] regulator-dummy: disabling
[    4.369328]   Magic number: 14:801:767
[    4.369425] rtc_cmos 00:04: setting system clock to 2014-09-15 04:46:19 UTC (1410756379)
[    4.369521] acpi-cpufreq: overriding BIOS provided _PSD data
[    4.369615] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.369616] EDD information not available.
[    4.369638] PM: Hibernation image not present or could not be loaded.
[    4.370920] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
[    4.370923] Write protecting the kernel read-only data: 12288k
[    4.373026] Freeing unused kernel memory: 808K (ffff880001736000 - ffff880001800000)
[    4.374699] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    4.383247] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    4.387494] systemd-udevd[121]: starting version 204
[    4.399908] Floppy drive(s): fd0 is 1.44M
[    4.405377] ahci 0000:00:11.0: version 3.0
[    4.405600] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    4.405603] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[    4.406101] scsi0 : ahci
[    4.406291] scsi1 : ahci
[    4.406632] scsi2 : ahci
[    4.406807] scsi3 : ahci
[    4.406839] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[    4.406842] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[    4.406845] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[    4.406847] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[    4.408529] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.408542] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    4.408652] scsi4 : pata_atiixp
[    4.408725] scsi5 : pata_atiixp
[    4.408750] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[    4.408761] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[    4.408763] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[    4.408901] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc9000063c000, 6c:f0:49:03:07:a4, XID 1c4000c0 IRQ 42
[    4.408903] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    4.418692] FDC 0 is a post-1991 82077
[    4.469213] firewire_ohci 0000:03:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    4.621409] usb 1-5: new high-speed USB device number 3 using ehci-pci
[    4.725561] ata3: SATA link down (SStatus 0 SControl 300)
[    4.725598] ata1: SATA link down (SStatus 0 SControl 300)
[    4.725666] ata2: SATA link down (SStatus 0 SControl 300)
[    4.769777] usb 1-5: New USB device found, idVendor=0411, idProduct=01a2
[    4.769781] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.769783] usb 1-5: Product: 802.11 n WLAN
[    4.769784] usb 1-5: Manufacturer: Ralink
[    4.769786] usb 1-5: SerialNumber: 1.0
[    4.897776] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.898833] ata4.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[    4.898837] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    4.900059] ata4.00: configured for UDMA/133
[    4.900267] scsi 3:0:0:0: Direct-Access     ATA      ST3500418AS      CC38 PQ: 0 ANSI: 5
[    4.900414] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    4.900455] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    4.900545] sd 3:0:0:0: [sda] Write Protect is off
[    4.900548] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.900580] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.952823]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    4.953373] sd 3:0:0:0: [sda] Attached SCSI disk
[    4.965858] tsc: Refined TSC clocksource calibration: 2913.163 MHz
[    4.969980] firewire_core 0000:03:0e.0: created device fw0: GUID 00e650f70000241d, S400
[    5.142142] usb 2-3: new high-speed USB device number 2 using ehci-pci
[    5.277392] usb 2-3: New USB device found, idVendor=05ac, idProduct=12aa
[    5.277396] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.277398] usb 2-3: Product: iPod
[    5.277400] usb 2-3: Manufacturer: Apple Inc.
[    5.277401] usb 2-3: SerialNumber: ce0b702ef0a91a5e681cd1e7b034d68cf6011d9c
[    5.538666] usb 4-3: new full-speed USB device number 2 using ohci-pci
[    5.872127] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    5.967370] Switched to clocksource tsc
[    6.403412] random: init urandom read with 97 bits of entropy available
[    6.673232] init: plymouth-upstart-bridge main process (188) terminated with status 1
[    6.673245] init: plymouth-upstart-bridge main process ended, respawning
[    6.675463] init: plymouth-upstart-bridge main process (199) terminated with status 1
[    6.675475] init: plymouth-upstart-bridge main process ended, respawning
[    6.677708] init: plymouth-upstart-bridge main process (200) terminated with status 1
[    6.677720] init: plymouth-upstart-bridge main process ended, respawning
[    6.679903] init: plymouth-upstart-bridge main process (201) terminated with status 1
[    6.679915] init: plymouth-upstart-bridge main process ended, respawning
[    6.682144] init: plymouth-upstart-bridge main process (202) terminated with status 1
[    6.682156] init: plymouth-upstart-bridge main process ended, respawning
[    6.684344] init: plymouth-upstart-bridge main process (203) terminated with status 1
[    6.684356] init: plymouth-upstart-bridge main process ended, respawning
[    6.686557] init: plymouth-upstart-bridge main process (204) terminated with status 1
[    6.686569] init: plymouth-upstart-bridge main process ended, respawning
[    6.688784] init: plymouth-upstart-bridge main process (205) terminated with status 1
[    6.688795] init: plymouth-upstart-bridge main process ended, respawning
[    6.690968] init: plymouth-upstart-bridge main process (206) terminated with status 1
[    6.690980] init: plymouth-upstart-bridge main process ended, respawning
[    6.693189] init: plymouth-upstart-bridge main process (207) terminated with status 1
[    6.693200] init: plymouth-upstart-bridge main process ended, respawning
[    6.695397] init: plymouth-upstart-bridge main process (208) terminated with status 1
[    6.695409] init: plymouth-upstart-bridge respawning too fast, stopped
[    7.263016] random: nonblocking pool is initialized
[   15.555857] Adding 26709444k swap on /dev/sda5.  Priority:-1 extents:1 across:26709444k FS
[   15.742489] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.766250] systemd-udevd[310]: starting version 204
[   15.861700] lp: driver loaded but no devices found
[   15.872969] ppdev: user-space parallel port driver
[   15.875795] parport_pc 00:09: reported by Plug and Play ACPI
[   15.875850] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   15.877312] wmi: Mapper loaded
[   15.891228] [drm] Initialized drm 1.1.0 20060810
[   15.905264] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20131115/utaddress-251)
[   15.905272] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.906494] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   15.906552] sp5100_tco: PCI Revision ID: 0x3c
[   15.906569] sp5100_tco: failed to find MMIO address, giving up.
[   15.918034] MCE: In-kernel MCE decoding enabled.
[   15.919471] [drm] radeon kernel modesetting enabled.
[   15.919534] checking generic (d0000000 3d0000) vs hw (d0000000 10000000)
[   15.919536] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[   15.919555] Console: switching to colour dummy device 80x25
[   15.920274] EDAC MC: Ver: 3.0.0
[   15.920373] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68BE 0x1458:0x21D6).
[   15.920397] [drm] register mmio base: 0xFDFC0000
[   15.920399] [drm] register mmio size: 131072
[   15.920763] ATOM BIOS: GV
[   15.920816] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   15.920818] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[   15.920820] [drm] Detected VRAM RAM=1024M, BAR=256M
[   15.920821] [drm] RAM width 128bits DDR
[   15.921572] [TTM] Zone  kernel: Available graphics memory: 2022966 kiB
[   15.921575] [TTM] Initializing pool allocator
[   15.921580] [TTM] Initializing DMA pool allocator
[   15.921599] [drm] radeon: 1024M of VRAM memory ready
[   15.921600] [drm] radeon: 1024M of GTT memory ready.
[   15.921611] [drm] Loading JUNIPER Microcode
[   15.922237] AMD64 EDAC driver v3.4.0
[   15.922264] EDAC amd64: DRAM ECC disabled.
[   15.922269] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   15.922269]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   15.922269]  (Note that use of the override may cause unknown side effects.)
[   15.950581] kvm: disabled by bios
[   15.953314] type=1400 audit(1410745591.066:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=408 comm="apparmor_parser"
[   15.953321] type=1400 audit(1410745591.066:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=408 comm="apparmor_parser"
[   15.953325] type=1400 audit(1410745591.066:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=408 comm="apparmor_parser"
[   15.953747] type=1400 audit(1410745591.066:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=408 comm="apparmor_parser"
[   15.953752] type=1400 audit(1410745591.066:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=408 comm="apparmor_parser"
[   15.953973] type=1400 audit(1410745591.066:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=408 comm="apparmor_parser"
[   15.964839] hda-intel 0000:00:14.2: Using LPIB position fix
[   15.969351] lp0: using parport0 (interrupt-driven).
[   15.970223] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[   15.981272] SKU: Nid=0x1d sku_cfg=0x4005e601
[   15.981276] SKU: port_connectivity=0x1
[   15.981277] SKU: enable_pcbeep=0x0
[   15.981278] SKU: check_sum=0x00000005
[   15.981279] SKU: customization=0x000000e6
[   15.981280] SKU: external_amp=0x0
[   15.981280] SKU: platform_type=0x0
[   15.981281] SKU: swap=0x0
[   15.981282] SKU: override=0x1
[   15.981906] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   15.981907]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.981908]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   15.981909]    mono: mono_out=0x0
[   15.981910]    dig-out=0x1e/0x0
[   15.981911]    inputs:
[   15.981912]      Front Mic=0x19
[   15.981914]      Rear Mic=0x18
[   15.981915]      Line=0x1a
[   15.981915]    dig-in=0x1f
[   15.981917] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[   15.981918] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0885
[   16.022717] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[   16.022841] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[   16.023249] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[   16.023307] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[   16.023356] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[   16.023401] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[   16.023447] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[   16.023497] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[   16.046699] cfg80211: Calling CRDA to update world regulatory domain
[   16.172549] cfg80211: World regulatory domain updated:
[   16.172553] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   16.172555] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.172557] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.172558] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.172559] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.172560] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.225247] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   16.226816] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[   16.231061] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[   16.231150] radeon 0000:01:00.0: WB enabled
[   16.231153] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880125d45c00
[   16.231155] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880125d45c0c
[   16.231572] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9001089c418
[   16.231574] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   16.231575] [drm] Driver supports precise vblank timestamp query.
[   16.231593] radeon 0000:01:00.0: irq 43 for MSI/MSI-X
[   16.231605] radeon 0000:01:00.0: radeon: using MSI.
[   16.231625] [drm] radeon: irq initialized.
[   16.247751] [drm] ring test on 0 succeeded in 1 usecs
[   16.247807] [drm] ring test on 3 succeeded in 1 usecs
[   16.443698] [drm] ring test on 5 succeeded in 1 usecs
[   16.443705] [drm] UVD initialized successfully.
[   16.443806] [drm] Enabling audio 0 support
[   16.443830] [drm] ib test on ring 0 succeeded in 0 usecs
[   16.443850] [drm] ib test on ring 3 succeeded in 0 usecs
[   16.529838] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   16.614144] [drm] ib test on ring 5 succeeded
[   16.614575] [drm] Radeon Display Connectors
[   16.614577] [drm] Connector 0:
[   16.614578] [drm]   DP-1
[   16.614579] [drm]   HPD4
[   16.614580] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   16.614581] [drm]   Encoders:
[   16.614582] [drm]     DFP1: INTERNAL_UNIPHY2
[   16.614583] [drm] Connector 1:
[   16.614584] [drm]   HDMI-A-1
[   16.614585] [drm]   HPD5
[   16.614586] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   16.614587] [drm]   Encoders:
[   16.614588] [drm]     DFP2: INTERNAL_UNIPHY2
[   16.614588] [drm] Connector 2:
[   16.614589] [drm]   DVI-I-1
[   16.614590] [drm]   HPD1
[   16.614591] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[   16.614592] [drm]   Encoders:
[   16.614593] [drm]     DFP3: INTERNAL_UNIPHY1
[   16.614594] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   16.614595] [drm] Connector 3:
[   16.614595] [drm]   DVI-I-2
[   16.614596] [drm]   HPD6
[   16.614597] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[   16.614598] [drm]   Encoders:
[   16.614599] [drm]     DFP4: INTERNAL_UNIPHY
[   16.614600] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   16.614636] [drm] Internal thermal controller with fan control
[   16.617601] [drm] radeon: dpm initialized
[   16.665903] [drm] fb mappable at 0xD045E000
[   16.665906] [drm] vram apper at 0xD0000000
[   16.665907] [drm] size 5324800
[   16.665908] [drm] fb depth is 24
[   16.665909] [drm]    pitch is 5888
[   16.666013] fbcon: radeondrmfb (fb0) is primary device
[   16.674752] Console: switching to colour frame buffer device 180x56
[   16.678494] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   16.678496] radeon 0000:01:00.0: registered panic notifier
[   16.678501] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[   16.678602] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   16.678604] hda-intel 0000:01:00.1: Using LPIB position fix
[   16.678640] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
[   16.681125] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[   16.685564] HDMI ATI/AMD: no speaker allocation for ELD
[   16.685628] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[   16.745860] init: failsafe main process (614) killed by TERM signal
[   17.360283] type=1400 audit(1410745592.470:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=702 comm="apparmor_parser"
[   17.360291] type=1400 audit(1410745592.470:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=702 comm="apparmor_parser"
[   17.360747] type=1400 audit(1410745592.470:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=702 comm="apparmor_parser"
[   17.503514] init: cups main process (703) killed by HUP signal
[   17.503525] init: cups main process ended, respawning
[   17.517126] Bluetooth: Core ver 2.17
[   17.517149] NET: Registered protocol family 31
[   17.517150] Bluetooth: HCI device and connection manager initialized
[   17.517159] Bluetooth: HCI socket layer initialized
[   17.517161] Bluetooth: L2CAP socket layer initialized
[   17.517164] Bluetooth: SCO socket layer initialized
[   17.520590] Bluetooth: RFCOMM TTY layer initialized
[   17.520602] Bluetooth: RFCOMM socket layer initialized
[   17.520611] Bluetooth: RFCOMM ver 1.11
[   17.561062] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.561066] Bluetooth: BNEP filters: protocol multicast
[   17.561074] Bluetooth: BNEP socket layer initialized
[   18.205647] r8169 0000:02:00.0 eth0: link down
[   18.205688] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.205948] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.297895] type=1400 audit(1410745593.406:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=783 comm="apparmor_parser"
[   20.695858] usb 4-3: device descriptor read/64, error -110
[   30.860555] vboxdrv: module verification failed: signature and/or  required key missing - tainting kernel
[   30.863092] vboxdrv: Found 4 processor cores.
[   30.863880] vboxdrv: fAsync=0 offMin=0x3de offMax=0x1a43
[   30.863978] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   30.863979] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
[   30.880271] vboxpci: IOMMU not found (not registered)
[   30.975455] init: plymouth-stop pre-start process (2317) terminated with status 1
[   35.957198] usb 4-3: device descriptor read/64, error -110
[   36.173502] usb 1-5: reset high-speed USB device number 3 using ehci-pci
[   36.314725] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[   36.342892] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[   36.346915] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   36.347224] usbcore: registered new interface driver rt2800usb
[   36.353677] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[   36.380175] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[   36.441885] usb 4-3: new full-speed USB device number 3 using ohci-pci
[   36.806309] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   36.806631] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   39.513581] wlan0: authenticate with 18:28:61:0f:b0:4d
[   39.561982] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[   39.563616] wlan0: authenticated
[   39.566231] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[   39.569462] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=2)
[   39.576215] wlan0: associated
[   39.576270] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   39.614530] wlan0: deauthenticating from 18:28:61:0f:b0:4d by local choice (reason=2)
[   39.664996] wlan0: authenticate with 18:28:61:0f:b0:4d
[   39.692152] wlan0: send auth to 18:28:61:0f:b0:4d (try 1/3)
[   39.692788] cfg80211: Calling CRDA to update world regulatory domain
[   39.693646] wlan0: authenticated
[   39.694427] wlan0: associate with 18:28:61:0f:b0:4d (try 1/3)
[   39.695179] cfg80211: World regulatory domain updated:
[   39.695183] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   39.695185] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.695187] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.695188] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   39.695189] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.695191] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.697666] wlan0: RX AssocResp from 18:28:61:0f:b0:4d (capab=0x411 status=0 aid=2)
[   39.704501] wlan0: associated
[   47.471728] audit_printk_skb: 156 callbacks suppressed
[   47.471732] type=1400 audit(1410745622.538:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2814 comm="apparmor_parser"
[   47.471739] type=1400 audit(1410745622.538:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2814 comm="apparmor_parser"
[   47.472163] type=1400 audit(1410745622.538:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2814 comm="apparmor_parser"
[   51.599074] usb 4-3: device descriptor read/64, error -110
[   57.160022] systemd-hostnamed[2927]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[   66.860371] usb 4-3: device descriptor read/64, error -110
[   67.100719] usb 4-3: new full-speed USB device number 4 using ohci-pci
[   77.523269] usb 4-3: device not accepting address 4, error -110
[   77.659466] usb 4-3: new full-speed USB device number 5 using ohci-pci
[   88.082040] usb 4-3: device not accepting address 5, error -110
[   88.082082] hub 4-0:1.0: unable to enumerate USB device on port 3
[   88.474595] usb 3-2: new full-speed USB device number 2 using ohci-pci
[   88.641787] usb 3-2: New USB device found, idVendor=09da, idProduct=9090
[   88.641792] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   88.641794] usb 3-2: Product: USB Device
[   88.641796] usb 3-2: Manufacturer: A4TECH
[   88.683634] hidraw: raw HID events driver (C) Jiri Kosina
[   88.700051] usbcore: registered new interface driver usbhid
[   88.700055] usbhid: USB HID core driver
[   88.711747] input: A4TECH USB Device as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input12
[   88.712001] hid-generic 0003:09DA:9090.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:12.0-2/input0
[   88.712171] input: A4TECH USB Device as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input13
[   88.712274] hid-generic 0003:09DA:9090.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:12.0-2/input1
arda@Varda:~$



12-dmesg | tail

arda@Varda:~$ dmesg | tail
[   88.641794] usb 3-2: Product: USB Device
[   88.641796] usb 3-2: Manufacturer: A4TECH
[   88.683634] hidraw: raw HID events driver (C) Jiri Kosina
[   88.700051] usbcore: registered new interface driver usbhid
[   88.700055] usbhid: USB HID core driver
[   88.711747] input: A4TECH USB Device as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input12
[   88.712001] hid-generic 0003:09DA:9090.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:12.0-2/input0
[   88.712171] input: A4TECH USB Device as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input13
[   88.712274] hid-generic 0003:09DA:9090.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:12.0-2/input1
[ 1386.769873] systemd-hostnamed[4368]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
arda@Varda:~$



Soru:
Alıntı Yap
Bu klavye ve fare A4Tech'in hangi modelleri? Sistem başlangıcında takılı oluyorlar mı? Bir kere çıkartıp takınca tepki veriyorlar mı?

Cevap:
Klavye: A4 Tech KLS-7MUU X-Slim anti-RSI USB KLS-7MUU USB
Fare:  Model: XL-747H

-Evet takılı oluyorlar

-Ubuntu kullanıcı şifremi girdikten sonra çıkartıp taktım bir etkisi olmadı ,chrome u açtım yaklaşık 25-30 saniye sonra çalıştı ama dengesiz bir biçimde çalıştı düz bir şekilde ilerletemiyordum fareyi , küçük dağlar çiziyordu tabiri caizse :D,sonra w7 yi açtığımda yine çizmeye devam etti:D, pc yi kapattım açtım düzeldi :)
"Benim gördüğüm bazı gerçekler bazı insanların kurduğu hayallerden daha gerçek." - Nihat Doğan

if

@ardak, şu an sorun yok mu yani?

ardak

#4
@if , dediğim gibi bazen düzgün çalışıyor bazen çalışmıyor


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 18 Eylül 2014 - 10:06:32

@if , şu anda ubuntu dan yazıyorum internet ve fare çalışıyor ama gecikmeli (fareyi chrome u açmadan çalıştıramıyorum) ve klavye "USB" bağlantılı değil "Min DIN" bağlantısı var ; açılışta bir sorun oluşmuyor ama köşeli parantez yapamıyorum -ctrl ve alt tuşlarını denedim çalışıyorlar- .
"Benim gördüğüm bazı gerçekler bazı insanların kurduğu hayallerden daha gerçek." - Nihat Doğan

heartsmagic

Kullanıcı girişinden sonra fareyi çıkartıp takınca tepki veriyor mu? Ya da sorun oluştuktan sonra?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

ardak

@heartsmagic . hayır tepki vermiyor yine 20-30 sn bekliyorum ve sonra fare kafayı yiyor
"Benim gördüğüm bazı gerçekler bazı insanların kurduğu hayallerden daha gerçek." - Nihat Doğan

meda

1.BİOS güncel mi ? Güncelse BİOS ayarlarını sıfırlayın ve herhangi bir ayarı değiştirmeden sistemi çalıştırın.

2.Farklı bir kullanıcı oluşturup, oluşturmuş olduğunuz yeni kullanıcıda da benzer sorunları gözlemleyebilirsiniz.

Bazen alakasız gibi gördüğümüz şeyler sorunu çözebilliyor.
"BEDAVA Bedava yaşıyoruz, bedava;Hava bedava, bulut bedava;
Dere tepe bedava;Yağmur çamur bedava;Otomobillerin dışı,Sinemaların kapısı,Camekanlar bedava; Peynir ekmek değil ama Acı su bedava;Kelle fiyatına hürriyet, Esirlik bedava; Bedava yaşıyoruz, bedava. Orhan VELİ"

ardak

@meda,

1-BİOS F9 sürümün deydi beta sürüm vardı onu yükledim (F10b). Link

2-farklı bir kullanıcı oluşturmadım ama konuk hesabı ile giriş yapmıştım ve sorun devam ediyordu.

eklemek istediğim bir şey var;

ilk başta ubs den boot ile ubuntu yu kurarken zorlanmıştım
biraz kurcaladım bios u ve sonra sorunun bios da değil de
usb de olduğunu araştırıp buldum
neyse kurduk dan sonra
bios u file-safe load seçeneğiyle resetledim
hdd yi ahcı mod da çalıştırın uyarısı geldi hayır dedim
ve sonra grub düzgün bir biçimde açıldı
ubuntuyu seçtim
ubuntu açıldı
kablosuz ,fare iyi bir şekilde çalışıyordu sonra
yeniden başlattım
bilgisayar başlarken bellek kontrollünden geçmesi yaklaşık 10 saniye sürüyordu ve hala sürüyor , yani anormal biçimde uzadı süre
ubuntuyu kurduk dan sonra oldu bunlar ve hala çok uzun sürüyor.
"Benim gördüğüm bazı gerçekler bazı insanların kurduğu hayallerden daha gerçek." - Nihat Doğan

heartsmagic

Benzer sorunlar var gibi ama çözüm göremedim. Hatta bizim forumda bile dile getirilmiş:
https://forum.ubuntu-tr.net/index.php?topic=30567.0

Farklı bir fare ile deneme imkânın var mı?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

ardak

Alıntı yapılan: heartsmagic - 18 Eylül 2014 - 17:18:56
Benzer sorunlar var gibi ama çözüm göremedim. Hatta bizim forumda bile dile getirilmiş:
https://forum.ubuntu-tr.net/index.php?topic=30567.0

Farklı bir fare ile deneme imkânın var mı?

@heartsmagic , ben öyle düşünmüyorum çünkü onda fara ile klavye aynı anda çalışmıyormuş bendeki sorun bu değil , ben rahatça cs oynayabiliyorum :D :D , benim sorunum ubuntuyu açıldık dan yaklaşık 30-50 sn sonra fareyi kullanabilmem.
"Benim gördüğüm bazı gerçekler bazı insanların kurduğu hayallerden daha gerçek." - Nihat Doğan

heartsmagic

İşte, marka aynı model de yakın olunca insan şüphelenmiyor değil :)
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

if

Buraya[1] göre sorun donanımdan, işletim sisteminin uzun süre çalışmasından, güç uyumsuzluğundan, usb kablonun bozuk olmasından hatt uzunluğundan bile kaynaklanabilirmiş.

[1] http://paulphilippov.com/articles/how-to-fix-device-not-accepting-address-error