Bağlantı kopma sorunu

[EkremC]

Ubuntu'yu yeni kullanmaya başladım ve bende de maalesef kopma sorunu yaşanıyor.Bazen gidip geliyor, bazen de gidince hiç gelmiyor maalesef.Yardımcı olursanız çok sevinirim.Kod çıktıları da şu şekilde:

cat /etc/lsb-release

Kod Seç Genişlet

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=14.04
DISTRIB_CODENAME=trusty
DISTRIB_DESCRIPTION="Ubuntu 14.04.1 LTS"

uname -a

Kod Seç Genişlet

Linux ekrem-GE70-2OC-2OE 3.13.0-35-generic #62-Ubuntu SMP Fri Aug 15 01:58:42 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux


lspci

Kod Seç Genişlet

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d4)
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d4)
00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d4)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04)
01:00.0 3D controller: NVIDIA Corporation GK106M [GeForce GTX 765M] (rev a1)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)
04:00.0 Ethernet controller: Qualcomm Atheros Killer E2200 Gigabit Ethernet Controller (rev 13)
05:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723AE PCIe Wireless Network Adapter


lsusb

Kod Seç Genişlet

Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 13d3:3394 IMC Networks
Bus 003 Device 002: ID 0bb4:0dd5 HTC (High Tech Computer Corp.)
Bus 003 Device 004: ID 3938:1034 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

rfkill list

Kod Seç Genişlet

0: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no


sudo lshw -C network

Kod Seç Genişlet

*-network               
       açıklama: Eternet interface
       ürün: Killer E2200 Gigabit Ethernet Controller
       üretici: Qualcomm Atheros
       physical id: 0
       bus info: pci@0000:04:00.0
       mantıksal ad: eth0
       sürüm: 13
       serial: 8c:89:a5:0b:c8:6e
       kapasite: 1Gbit/s
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm pciexpress msi msix bus_master cap_list eternet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       yapılandırma: autonegotiation=on broadcast=yes driver=alx latency=0 link=no multicast=yes port=twisted pair
       kaynaklar: irq:49 bellek:f7900000-f793ffff ioport:d000(boyut=128)
  *-network
       açıklama: Kablosuz arayüz
       ürün: RTL8723AE PCIe Wireless Network Adapter
       üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:05:00.0
       mantıksal ad: wlan0
       sürüm: 00
       serial: 24:0a:64:37:de:23
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress bus_master cap_list eternet physical wireless
       yapılandırma: broadcast=yes driver=rtl8723ae driverversion=3.13.0-35-generic firmware=N/A ip=192.168.1.223 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn
       kaynaklar: irq:17 ioport:c000(boyut=256) bellek:f7800000-f7803fff


ifconfig

Kod Seç Genişlet

eth0      Link encap:Ethernet  HWaddr 8c:89:a5:0b:c8:6e 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:19

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:239 errors:0 dropped:0 overruns:0 frame:0
          TX packets:239 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:21570 (21.5 KB)  TX bytes:21570 (21.5 KB)

wlan0     Link encap:Ethernet  HWaddr 24:0a:64:37:de:23 
          inet addr:192.168.1.223  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::260a:64ff:fe37:de23/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1949 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1740 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1922135 (1.9 MB)  TX bytes:242279 (242.2 KB)


iwconfig

Kod Seç Genişlet

eth0      no wireless extensions.

lo        no wireless extensions.

wlan0     IEEE 802.11bgn  ESSID:"SUPERONLINE Wi-Fi - 9519" 
          Mode:Managed  Frequency:2.437 GHz  Access Point: 00:02:61:74:3B:48   
          Bit Rate=1 Mb/s   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:off
          Link Quality=34/70  Signal level=-76 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:12   Missed beacon:0


iwlist scanning

Kod Seç Genişlet

eth0      Interface doesn't support scanning.

lo        Interface doesn't support scanning.

wlan0     Scan completed :
          Cell 01 - Address: 00:02:61:74:3B:48
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=34/70  Signal level=-76 dBm 
                    Encryption key:on
                    ESSID:"SUPERONLINE Wi-Fi - 9519"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000079e332308
                    Extra: Last beacon: 98228ms ago
                    IE: Unknown: 001853555045524F4E4C494E452057692D4669202D2039353139
                    IE: Unknown: 010882848B960C121824
                    IE: Unknown: 030106
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 2A0100
                    IE: Unknown: 32043048606C
                    IE: Unknown: DD180050F20201010E0003A4000027A4000042435E0062322F00
                    IE: Unknown: DD0900037F01010000FF7F
                    IE: Unknown: DD0A00037F04010000000000
                    IE: Unknown: 07064E4120010B14
                    IE: Unknown: DD8A0050F204104A00011010440001021057000101103B00010310470010473C420104EA5926A5EBA2486ED560971021000954696C67696E20414210230006484731333131102400012D104200175636303230303030303030302D303031303937393531391054000800060050F20400011011000C486F6D652047617465776179100800020000103C000101

;)lsmod

Kod Seç Genişlet

Module                  Size  Used by
ctr                    13049  1
ccm                    17773  1
bnep                   19624  2
rfcomm                 69160  8
snd_hda_codec_hdmi     46368  1
snd_hda_codec_realtek    65580  1
arc4                   12608  2
hid_generic            12548  0
usbhid                 52570  0
hid                   106148  2 hid_generic,usbhid
snd_hda_intel          56451  5
x86_pkg_temp_thermal    14205  0
snd_hda_codec         192906  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
intel_powerclamp       14705  0
snd_hwdep              13602  1 snd_hda_codec
coretemp               13435  0
snd_pcm               102099  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
snd_seq_midi           13324  0
snd_seq_midi_event     14899  1 snd_seq_midi
snd_rawmidi            30144  1 snd_seq_midi
kvm_intel             143060  0
kvm                   451511  1 kvm_intel
crct10dif_pclmul       14289  0
crc32_pclmul           13113  0
ghash_clmulni_intel    13216  0
aesni_intel            55624  2
aes_x86_64             17131  1 aesni_intel
rtl8723ae              81882  0
lrw                    13286  1 aesni_intel
gf128mul               14951  1 lrw
rtl8723_common         23361  1 rtl8723ae
glue_helper            13990  1 aesni_intel
rtl_pci                26690  1 rtl8723ae
snd_seq                61560  2 snd_seq_midi_event,snd_seq_midi
ablk_helper            13597  1 aesni_intel
rtlwifi                63475  2 rtl_pci,rtl8723ae
cryptd                 20359  3 ghash_clmulni_intel,aesni_intel,ablk_helper
mac80211              630653  3 rtl_pci,rtlwifi,rtl8723ae
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
joydev                 17381  0
snd_timer              29482  2 snd_pcm,snd_seq
i915                  783805  6
nouveau              1097199  1
btusb                  32412  0
serio_raw              13462  0
bluetooth             391136  22 bnep,btusb,rfcomm
cfg80211              484040  2 mac80211,rtlwifi
rtsx_pci_ms            18151  0
ttm                    85115  1 nouveau
memstick               16966  1 rtsx_pci_ms
drm_kms_helper         53081  2 i915,nouveau
lpc_ich                21080  0
mei_me                 18627  0
mei                    82276  1 mei_me
snd                    69322  21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
drm                   303102  8 ttm,i915,drm_kms_helper,nouveau
soundcore              12680  1 snd
i2c_algo_bit           13413  2 i915,nouveau
parport_pc             32701  0
ppdev                  17671  0
lp                     17759  0
parport                42348  3 lp,ppdev,parport_pc
msi_wmi                13354  0
mxm_wmi                13021  1 nouveau
sparse_keymap          13948  1 msi_wmi
wmi                    19177  3 msi_wmi,mxm_wmi,nouveau
mac_hid                13205  0
video                  19476  2 i915,nouveau
rtsx_pci_sdmmc         23274  0
ahci                   25819  2
alx                    32452  0
psmouse               106678  0
libahci                32716  1 ahci
mdio                   13807  1 alx
rtsx_pci               45956  2 rtsx_pci_ms,rtsx_pci_sdmmc

dmesg

Kod Seç Genişlet

[    2.129233] usb 3-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.129235] usb 3-11: Product: Gaming Mouse
[    2.129236] usb 3-11: Manufacturer: BTL
[    2.549339] Switched to clocksource tsc
[    2.699133] random: init urandom read with 114 bits of entropy available
[    2.994186] random: nonblocking pool is initialized
[    3.224250] init: plymouth-upstart-bridge main process (225) terminated with status 1
[    3.224259] init: plymouth-upstart-bridge main process ended, respawning
[    3.225665] init: plymouth-upstart-bridge main process (238) terminated with status 1
[    3.225674] init: plymouth-upstart-bridge main process ended, respawning
[    3.226802] init: plymouth-upstart-bridge main process (240) terminated with status 1
[    3.226808] init: plymouth-upstart-bridge main process ended, respawning
[    3.228132] init: plymouth-upstart-bridge main process (241) terminated with status 1
[    3.228138] init: plymouth-upstart-bridge main process ended, respawning
[    3.229120] init: plymouth-upstart-bridge main process (243) terminated with status 1
[    3.229125] init: plymouth-upstart-bridge main process ended, respawning
[    3.230374] init: plymouth-upstart-bridge main process (244) terminated with status 1
[    3.230380] init: plymouth-upstart-bridge main process ended, respawning
[    3.231477] init: plymouth-upstart-bridge main process (246) terminated with status 1
[    3.231485] init: plymouth-upstart-bridge main process ended, respawning
[    3.232804] init: plymouth-upstart-bridge main process (247) terminated with status 1
[    3.232811] init: plymouth-upstart-bridge main process ended, respawning
[    3.233955] init: plymouth-upstart-bridge main process (249) terminated with status 1
[    3.233963] init: plymouth-upstart-bridge main process ended, respawning
[    3.235306] init: plymouth-upstart-bridge main process (250) terminated with status 1
[    3.235313] init: plymouth-upstart-bridge main process ended, respawning
[    3.236324] init: plymouth-upstart-bridge main process (252) terminated with status 1
[    3.236330] init: plymouth-upstart-bridge respawning too fast, stopped
[   12.844458] Adding 11401212k swap on /dev/sda6.  Priority:-1 extents:1 across:11401212k FS
[   12.939876] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.964268] systemd-udevd[352]: starting version 204
[   13.080492] wmi: Mapper loaded
[   13.090260] input: MSI WMI hotkeys as /devices/virtual/input/input6
[   13.100005] lp: driver loaded but no devices found
[   13.102941] ppdev: user-space parallel port driver
[   13.235813] [drm] Initialized drm 1.1.0 20060810
[   13.236390] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[   13.238040] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   13.238046] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.238051] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[   13.238053] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[   13.238055] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPR_ 3 (20131115/utaddress-251)
[   13.238057] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.238058] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[   13.238060] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[   13.238062] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPR_ 3 (20131115/utaddress-251)
[   13.238064] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.238066] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   13.245410] cfg80211: Calling CRDA to update world regulatory domain
[   13.247659] Bluetooth: Core ver 2.17
[   13.247674] NET: Registered protocol family 31
[   13.247675] Bluetooth: HCI device and connection manager initialized
[   13.247682] Bluetooth: HCI socket layer initialized
[   13.247683] Bluetooth: L2CAP socket layer initialized
[   13.247686] Bluetooth: SCO socket layer initialized
[   13.252536] MXM: GUID detected in BIOS
[   13.252558] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
[   13.252623] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   13.252680] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   13.252901] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[   13.252903] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[   13.252920] checking generic (b0000000 7f0000) vs hw (c0000000 10000000)
[   13.252922] checking generic (b0000000 7f0000) vs hw (d0000000 2000000)
[   13.253074] [drm] hdmi device  not found 1 0 1
[   13.253211] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0e6220a1
[   13.253214] nouveau  [  DEVICE][0000:01:00.0] Chipset: GK106 (NVE6)
[   13.253216] nouveau  [  DEVICE][0000:01:00.0] Family : NVE0
[   13.254174] usbcore: registered new interface driver btusb
[   13.254732] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[   13.302904] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[   13.302907] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
[   13.331795] rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin
[   13.471495] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   13.482200] type=1400 audit(1409855587.050:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=472 comm="apparmor_parser"
[   13.482203] type=1400 audit(1409855587.050:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=472 comm="apparmor_parser"
[   13.482205] type=1400 audit(1409855587.050:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=472 comm="apparmor_parser"
[   13.482443] type=1400 audit(1409855587.050:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=472 comm="apparmor_parser"
[   13.482445] type=1400 audit(1409855587.050:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=472 comm="apparmor_parser"
[   13.482529] type=1400 audit(1409855587.050:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=482 comm="apparmor_parser"
[   13.482535] type=1400 audit(1409855587.050:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=482 comm="apparmor_parser"
[   13.482537] type=1400 audit(1409855587.050:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=482 comm="apparmor_parser"
[   13.482566] type=1400 audit(1409855587.050:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=472 comm="apparmor_parser"
[   13.482837] type=1400 audit(1409855587.050:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=482 comm="apparmor_parser"
[   13.487848] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[   13.487849] nouveau  [   VBIOS][0000:01:00.0] using image from PROM
[   13.487915] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[   13.487917] nouveau  [   VBIOS][0000:01:00.0] version 80.06.5d.00.06
[   13.488167] nouveau  [ DEVINIT][0000:01:00.0] adaptor not initialised
[   13.488168] nouveau  [   VBIOS][0000:01:00.0] running init tables
[   13.519356] cfg80211: World regulatory domain updated:
[   13.519356] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.519357] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.519358] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.519359] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.519359] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.519360] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.539739] hidraw: raw HID events driver (C) Jiri Kosina
[   13.557151] usbcore: registered new interface driver usbhid
[   13.557152] usbhid: USB HID core driver
[   13.558549] input: BTL Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.0/input/input7
[   13.558642] hid-generic 0003:3938:1034.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [BTL Gaming Mouse] on usb-0000:00:14.0-11/input0
[   13.558821] input: BTL Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.1/input/input8
[   13.558898] hid-generic 0003:3938:1034.0002: input,hidraw1: USB HID v1.11 Keyboard [BTL Gaming Mouse] on usb-0000:00:14.0-11/input1
[   13.566488] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   13.566610] rtlwifi: wireless switch is on
[   13.591126] nouveau 0000:01:00.0: irq 45 for MSI/MSI-X
[   13.591135] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[   13.591162] nouveau  [     PFB][0000:01:00.0] RAM type: GDDR5
[   13.591163] nouveau  [     PFB][0000:01:00.0] RAM size: 2048 MiB
[   13.591163] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
[   13.595773] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 600000uv
[   13.618914] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
[   13.618920] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[   13.618923] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[   13.618942] nouveau  [     CLK][0000:01:00.0] 07: core 405 MHz memory 405 MHz
[   13.618986] nouveau  [     CLK][0000:01:00.0] 0a: core 405-901 MHz memory 810 MHz
[   13.619045] nouveau  [     CLK][0000:01:00.0] 0f: core 405-901 MHz memory 2000 MHz
[   13.619110] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz memory 405 MHz
[   13.653578] [TTM] Zone  kernel: Available graphics memory: 4047758 kiB
[   13.653580] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   13.653581] [TTM] Initializing pool allocator
[   13.653583] [TTM] Initializing DMA pool allocator
[   13.653588] nouveau  [     DRM] VRAM: 2048 MiB
[   13.653589] nouveau  [     DRM] GART: 1048576 MiB
[   13.653592] nouveau W[     DRM] Pointer to TMDS table invalid
[   13.653593] nouveau  [     DRM] DCB version 4.0
[   13.653594] nouveau W[     DRM] Pointer to flat panel table invalid
[   13.653701] nouveau  [     DRM] ACPI backlight interface available, not registering our own
[   13.665435] nouveau  [     DRM] MM: using COPY for buffer copies
[   13.665444] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[   13.666030] [drm] Memory usable by graphics device = 2048M
[   13.666034] checking generic (b0000000 7f0000) vs hw (b0000000 10000000)
[   13.666035] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[   13.666087] Console: switching to colour dummy device 80x25
[   13.710142] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[   13.710150] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   13.710151] [drm] Driver supports precise vblank timestamp query.
[   13.710165] vga_switcheroo: enabled
[   13.710211] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   13.872549] fbcon: inteldrmfb (fb0) is primary device
[   15.571660] Console: switching to colour frame buffer device 240x67
[   15.575222] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   15.575223] i915 0000:00:02.0: registered panic notifier
[   15.575595] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   15.588457] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[   15.588463] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[   15.588468] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff880244108820), AE_NOT_FOUND (20131115/psparse-536)
[   15.588525] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:48/LNXVIDEO:00/input/input9
[   15.589480] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   15.589682] acpi device:64: registered as cooling_device14
[   15.589737] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10
[   15.589796] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
[   15.591817] HDA driver get symbol successfully from i915 module
[   15.591926] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[   15.599640] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
[   15.601739] init: failsafe main process (711) killed by TERM signal
[   15.602478] SKU: Nid=0x1d sku_cfg=0x4037b22d
[   15.602479] SKU: port_connectivity=0x1
[   15.602480] SKU: enable_pcbeep=0x1
[   15.602480] SKU: check_sum=0x00000007
[   15.602481] SKU: customization=0x000000b2
[   15.602482] SKU: external_amp=0x5
[   15.602482] SKU: platform_type=0x1
[   15.602483] SKU: swap=0x0
[   15.602483] SKU: override=0x1
[   15.602768] autoconfig: line_outs=2 (0x1b/0x16/0x0/0x0/0x0) type:speaker
[   15.602769]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.602770]    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[   15.602770]    mono: mono_out=0x0
[   15.602771]    dig-out=0x1e/0x0
[   15.602771]    inputs:
[   15.602772]      Internal Mic=0x19
[   15.602773]      Mic=0x18
[   15.602774] realtek: No valid SSID, checking pincfg 0x4037b22d for NID 0x1d
[   15.602775] realtek: Enabling init ASM_ID=0xb22d CODEC_ID=10ec0892
[   15.610119] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[   15.610164] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[   15.610223] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[   15.610455] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[   15.610484] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[   15.803875] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   15.977810] Bluetooth: RFCOMM TTY layer initialized
[   15.977818] Bluetooth: RFCOMM socket layer initialized
[   15.977822] Bluetooth: RFCOMM ver 1.11
[   16.078632] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.078634] Bluetooth: BNEP filters: protocol multicast
[   16.078641] Bluetooth: BNEP socket layer initialized
[   16.343272] init: cups main process (800) killed by HUP signal
[   16.343278] init: cups main process ended, respawning
[   17.409647] alx 0000:04:00.0: irq 49 for MSI/MSI-X
[   17.409725] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.410455] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.788403] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.788739] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.152267] nouveau E[    PBUS][0000:01:00.0] MMIO write of 0x00000000 FAULT at 0x418880 [ IBUS ]
[   19.152399] nouveau E[   PIBUS][0000:01:00.0] GPC2: 0x419eb4 0xbadf1000 (0x3800820c)
[   19.723450] wlan0: authenticate with 00:02:61:74:3b:48
[   19.752253] wlan0: send auth to 00:02:61:74:3b:48 (try 1/3)
[   19.755090] wlan0: authenticated
[   19.758991] wlan0: associate with 00:02:61:74:3b:48 (try 1/3)
[   19.763745] wlan0: RX AssocResp from 00:02:61:74:3b:48 (capab=0x431 status=0 aid=2)
[   19.763992] wlan0: associated
[   19.763999] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   19.764053] cfg80211: Calling CRDA for country: NA
[   21.154402] nouveau E[  PGRAPH][0000:01:00.0] HUB_INIT timed out
[   21.154407] nouveau E[  PGRAPH][0000:01:00.0] 409000 - done 0x00000244
[   21.154412] nouveau E[  PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[   21.154416] nouveau E[  PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000002 0x00000009
[   21.154419] nouveau E[  PGRAPH][0000:01:00.0] 502000 - done 0x00000300
[   21.154425] nouveau E[  PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[   21.154432] nouveau E[  PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[   21.154434] nouveau E[  PGRAPH][0000:01:00.0] 50a000 - done 0x00000300
[   21.154440] nouveau E[  PGRAPH][0000:01:00.0] 50a000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[   21.154447] nouveau E[  PGRAPH][0000:01:00.0] 50a000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[   21.154449] nouveau E[  PGRAPH][0000:01:00.0] 512000 - done 0x00000300
[   21.154455] nouveau E[  PGRAPH][0000:01:00.0] 512000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[   21.154462] nouveau E[  PGRAPH][0000:01:00.0] 512000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[   21.154463] nouveau E[  PGRAPH][0000:01:00.0] init failed, -16
[   21.904385] wlan0: deauthenticating from 00:02:61:74:3b:48 by local choice (reason=2)
[   21.924928] wlan0: authenticate with 00:02:61:74:3b:48
[   21.925006] wlan0: send auth to 00:02:61:74:3b:48 (try 1/3)
[   21.925247] cfg80211: Calling CRDA to update world regulatory domain
[   21.926488] wlan0: authenticated
[   21.926933] cfg80211: World regulatory domain updated:
[   21.926935] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   21.926936] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.926937] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.926938] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   21.926938] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.926939] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.928750] wlan0: associate with 00:02:61:74:3b:48 (try 1/3)
[   21.931391] wlan0: RX AssocResp from 00:02:61:74:3b:48 (capab=0x431 status=0 aid=2)
[   21.931609] wlan0: associated
[   21.931653] cfg80211: Calling CRDA for country: NA
[   26.788717] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   26.789006] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   46.134100] audit_printk_skb: 168 callbacks suppressed
[   46.134103] type=1400 audit(1409855619.674:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2240 comm="apparmor_parser"
[   46.134108] type=1400 audit(1409855619.674:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2240 comm="apparmor_parser"
[   46.134369] type=1400 audit(1409855619.674:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2240 comm="apparmor_parser"
[   81.945289] wlan0: Connection to AP 00:02:61:74:3b:48 lost
[   81.985550] cfg80211: Calling CRDA to update world regulatory domain
[   81.990960] cfg80211: World regulatory domain updated:
[   81.990967] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   81.990972] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   81.990975] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   81.990979] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   81.990982] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   81.990985] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   83.363500] wlan0: authenticate with 00:02:61:74:3b:48
[   83.375593] wlan0: send auth to 00:02:61:74:3b:48 (try 1/3)
[   83.377167] wlan0: authenticated
[   83.378363] wlan0: associate with 00:02:61:74:3b:48 (try 1/3)
[   83.380975] wlan0: RX AssocResp from 00:02:61:74:3b:48 (capab=0x431 status=0 aid=2)
[   83.381208] wlan0: associated
[   83.381260] cfg80211: Calling CRDA for country: NA
[  108.502672] wlan0: Connection to AP 00:02:61:74:3b:48 lost
[  108.550843] cfg80211: Calling CRDA to update world regulatory domain
[  108.555151] cfg80211: World regulatory domain updated:
[  108.555157] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  108.555161] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  108.555164] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  108.555166] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  108.555169] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  108.555171] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  109.921282] wlan0: authenticate with 00:02:61:74:3b:48
[  109.932985] wlan0: send auth to 00:02:61:74:3b:48 (try 1/3)
[  109.934426] wlan0: authenticated
[  109.935716] wlan0: associate with 00:02:61:74:3b:48 (try 1/3)
[  109.938287] wlan0: RX AssocResp from 00:02:61:74:3b:48 (capab=0x431 status=0 aid=2)
[  109.938514] wlan0: associated
[  109.938597] cfg80211: Calling CRDA for country: NA
[  145.084186] wlan0: Connection to AP 00:02:61:74:3b:48 lost
[  145.132344] cfg80211: Calling CRDA to update world regulatory domain
[  145.135769] cfg80211: World regulatory domain updated:
[  145.135773] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  145.135776] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  145.135779] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  145.135781] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  145.135783] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  145.135785] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  146.498484] wlan0: authenticate with 00:02:61:74:3b:48
[  146.510540] wlan0: send auth to 00:02:61:74:3b:48 (try 1/3)
[  146.512037] wlan0: authenticated
[  146.513262] wlan0: associate with 00:02:61:74:3b:48 (try 1/3)
[  146.515902] wlan0: RX AssocResp from 00:02:61:74:3b:48 (capab=0x431 status=0 aid=2)
[  146.516130] wlan0: associated
[  146.516178] cfg80211: Calling CRDA for country: NA
[  171.637700] wlan0: Connection to AP 00:02:61:74:3b:48 lost
[  171.677935] cfg80211: Calling CRDA to update world regulatory domain
[  171.683338] cfg80211: World regulatory domain updated:
[  171.683345] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  171.683350] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  171.683354] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  171.683357] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  171.683360] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  171.683363] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  173.056413] wlan0: authenticate with 00:02:61:74:3b:48
[  173.068001] wlan0: send auth to 00:02:61:74:3b:48 (try 1/3)
[  173.070620] wlan0: authenticated
[  173.074665] wlan0: associate with 00:02:61:74:3b:48 (try 1/3)
[  173.078486] wlan0: RX AssocResp from 00:02:61:74:3b:48 (capab=0x431 status=0 aid=2)
[  173.078716] wlan0: associated
[  173.078762] cfg80211: Calling CRDA for country: NA
[  184.155806] wlan0: Connection to AP 00:02:61:74:3b:48 lost
[  184.204011] cfg80211: Calling CRDA to update world regulatory domain
[  184.209414] cfg80211: World regulatory domain updated:
[  184.209421] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  184.209427] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  184.209431] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  184.209434] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  184.209437] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  184.209440] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  185.573979] wlan0: authenticate with 00:02:61:74:3b:48
[  185.586152] wlan0: send auth to 00:02:61:74:3b:48 (try 1/3)
[  185.588838] wlan0: authenticated
[  185.592866] wlan0: associate with 00:02:61:74:3b:48 (try 1/3)
[  185.596876] wlan0: RX AssocResp from 00:02:61:74:3b:48 (capab=0x431 status=0 aid=2)
[  185.597143] wlan0: associated
[  185.597259] cfg80211: Calling CRDA for country: NA
[  436.166918] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  436.167162] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  445.370611] wlan0: Connection to AP 00:02:61:74:3b:48 lost
[  445.414763] cfg80211: Calling CRDA to update world regulatory domain
[  445.420031] cfg80211: World regulatory domain updated:
[  445.420038] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  445.420044] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  445.420051] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  445.420056] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  445.420062] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  445.420067] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  446.789481] wlan0: authenticate with 00:02:61:74:3b:48
[  446.800846] wlan0: send auth to 00:02:61:74:3b:48 (try 1/3)
[  446.802373] wlan0: authenticated
[  446.803504] wlan0: associate with 00:02:61:74:3b:48 (try 1/3)
[  446.806231] wlan0: RX AssocResp from 00:02:61:74:3b:48 (capab=0x431 status=0 aid=2)
[  446.806450] wlan0: associated
[  446.806512] cfg80211: Calling CRDA for country: NA
[  453.877399] wlan0: Connection to AP 00:02:61:74:3b:48 lost
[  453.921554] cfg80211: Calling CRDA to update world regulatory domain
[  453.926887] cfg80211: World regulatory domain updated:
[  453.926894] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  453.926899] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  453.926903] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  453.926906] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  453.926909] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  453.926912] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  455.295593] wlan0: authenticate with 00:02:61:74:3b:48
[  455.307856] wlan0: send auth to 00:02:61:74:3b:48 (try 1/3)
[  455.309549] wlan0: authenticated
[  455.310488] wlan0: associate with 00:02:61:74:3b:48 (try 1/3)
[  455.314950] wlan0: RX AssocResp from 00:02:61:74:3b:48 (capab=0x431 status=0 aid=2)
[  455.315169] wlan0: associated
[  455.315398] cfg80211: Calling CRDA for country: NA
[  551.267877] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  551.268550] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)


dmesg | tail

Kod Seç Genişlet

[  453.926912] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  455.295593] wlan0: authenticate with 00:02:61:74:3b:48
[  455.307856] wlan0: send auth to 00:02:61:74:3b:48 (try 1/3)
[  455.309549] wlan0: authenticated
[  455.310488] wlan0: associate with 00:02:61:74:3b:48 (try 1/3)
[  455.314950] wlan0: RX AssocResp from 00:02:61:74:3b:48 (capab=0x431 status=0 aid=2)
[  455.315169] wlan0: associated
[  455.315398] cfg80211: Calling CRDA for country: NA
[  551.267877] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[  551.268550] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)


[brun0_]

Kod Seç Genişlet

sudo ifconfig wlan0 down
yap bundan sonra

Kod Seç Genişlet

sudo ifconfig wlan0 up
yap bakalım biraz sallamasyon ama bende arada wifi da sıkıntı oluyor böyle yapıyorum düzeliyor.

[EkremC]

Hocam,denedim daha yeni gidince ama maalesef işe yaramadı.Şimdi yeniden başlattım öyle tekrardan bağlanabildim internete.

[brun0_]

reyiz kusura bakma benim bilgim buraya kadar diğer arkadaşlar ilgilenir inş

[EkremC]

reyiz kusura bakma benim bilgim buraya kadar diğer arkadaşlar ilgilenir inş

Canın sağ olsun hocam.İlgilendiğin için teşekkürler.

[if]

Kod Seç Genişlet


echo "options rtl8723ae swenc=1" | sudo tee /etc/modprobe.d/rtl8723ae.conf
sudo modprobe -r rtl8723ae
sudo modprobe rtl8723ae


komutlarından sonra bağlanınca durum nedir?

http://ubuntuforums.org/showthread.php?t=2238087&p=13092185#post13092185

[EkremC]

Kod Seç Genişlet


echo "options rtl8723ae swenc=1" | sudo tee /etc/modprobe.d/rtl8723ae.conf
sudo modprobe -r rtl8723ae
sudo modprobe rtl8723ae


komutlarından sonra bağlanınca durum nedir?

http://ubuntuforums.org/showthread.php?t=2238087&p=13092185#post13092185

Şimdilik bir sıkıntı yok,biraz daha kullandıktan sonra daha net anlarız galiba.Bir de internet yavaşlığı konusunda sıkıntım var.Onda da yardımcı olabilecek misiniz? 


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 04 Eylül 2014 - 23:58:30

Kod Seç Genişlet


echo "options rtl8723ae swenc=1" | sudo tee /etc/modprobe.d/rtl8723ae.conf
sudo modprobe -r rtl8723ae
sudo modprobe rtl8723ae


komutlarından sonra bağlanınca durum nedir?

http://ubuntuforums.org/showthread.php?t=2238087&p=13092185#post13092185

Şimdilik bir sıkıntı yok,biraz daha kullandıktan sonra daha net anlarız galiba.Bir de internet yavaşlığı konusunda sıkıntım var.Onda da yardımcı olabilecek misiniz? 

[if]

@EkremC, aynı iletiyi iki defa göndermenize gerek yok. Konuya daha hızlı yanıt almak adına yapıyorsanız vaktim olduğunda cevap veriyorum.

İnternet hızını artırmak için ipv6'yı devre dışı bırakmayı deneyebiliriz. ipv6.disable=1 çekirdek önyükleme seçeneği[1] ile sistemi başlatıp deneyelim.

[1] http://wiki.ubuntu-tr.net/index.php?title=%C3%87ekirdek_%C3%B6ny%C3%BCkleme_se%C3%A7enekleri

[EkremC]

Öyle bir düşüncem yoktu, yanlışlıkla oldu kusuruma bakmayın.

[if]

Yanlışlıkla olduysa siz kusuruma bakmayın.

[EkremC]

Kod Seç Genişlet


echo "options rtl8723ae swenc=1" | sudo tee /etc/modprobe.d/rtl8723ae.conf
sudo modprobe -r rtl8723ae
sudo modprobe rtl8723ae


komutlarından sonra bağlanınca durum nedir?

http://ubuntuforums.org/showthread.php?t=2238087&p=13092185#post13092185

@if, bu komutlardan sonra önceki kesilmelerden farklı olarak tekrardan benim kablosuz ağ adımı gösteriyor,bağlanmaya çalışıyor fakat bir türlü bağlanamıyor.

[heartsmagic]

Hangi aşamada oldu bu. Önce komutları denedin sorun olmadı, bir süre sonra mı olmaya başladı? Yoksa sistemi yeniden başlattın ve durum bu şekilde mi oldu? Sistemi yeniden başlattıktan sonra bu komutları uygulamana gerek yok.

[EkremC]

Hangi aşamada oldu bu. Önce komutları denedin sorun olmadı, bir süre sonra mı olmaya başladı? Yoksa sistemi yeniden başlattın ve durum bu şekilde mi oldu? Sistemi yeniden başlattıktan sonra bu komutları uygulamana gerek yok.

İlk başta internet varken yazmıştım,sonra internet gittiğinde tekrar yazdım bu komutları.O zaman yukarıdaki dediklerim oluyordu bu sabaha kadar. Bugün de koptu iki kere,ikisinde de tekrardan bu komutları yazdım ve bağlandım kablosuz ağa.Önceden bir hatam mı oldu diye düşünüyorum ama dün de komutları uygularken bugün yaptıklarımı yapmıştım.

[heartsmagic]

Kod Seç Genişlet

cat /etc/modprobe.d/rtl8723ae.conf
çıktısını bir görebilir miyiz? Söylediğim gibi bu komutları üst üste kullanmayacaksın, zaten ilk seferinde doğru şeyi yaptıysan bir sonraki sistem açılışında ilgili parametre ile devreye girmesi gerekiyor.

[EkremC]

Kod Seç Genişlet

cat /etc/modprobe.d/rtl8723ae.conf
çıktısını bir görebilir miyiz? Söylediğim gibi bu komutları üst üste kullanmayacaksın, zaten ilk seferinde doğru şeyi yaptıysan bir sonraki sistem açılışında ilgili parametre ile devreye girmesi gerekiyor.

Kod Seç Genişlet

options rtl8723ae swenc=1

buyrun çıktı bu şekilde.

[heartsmagic]

Orada bir de modem önerisi verilmiş:

First, check the settings in the router. WPA2-AES is preferred; not any WPA and WPA2 mixed mode and certainly not TKIP. Second, if your router is capable of N speeds, I have better luck with a channel width of 20 MHz in the 2.4 GHz band instead of automatic 20/40 MHz. I also have better luck with a fixed channel, either 1, 6 or 11, rather than automatic channel selection. After making these changes, reboot the router.

Bunları da bir dener misin? Şifreleme türü olarak sadece WPA2-AES kullanılsın demiş. Sende durum nedir?

[EkremC]

Tam olarak ne yapmam gerektiğini anlamadım maalesef ama şifreleme türü olarak bende WPA&WPA2 kişisel seçili.

[heartsmagic]

WPA2 yok mu orada?

[EkremC]

Hayır.Sadece WPA&WPA2 Enterprise var WPA2 ile ilgili olarak.(WPA&WPA2 kişiselin dışında)

[heartsmagic]

Allah Allah, modemlerde genelde olması lazım. Şu an önerim yok ne yazık ki, güzel ve geniş bir zamanda bakınmak lazım. Bir de, kopma olduğunda şunu bir geç lütfen:

Kod Seç Genişlet

dmesg | tail

[EkremC]

Tamam,kopma olduğunda geçeceğim ama şunu söylemeliyim ki kopma sorununu artık pek yaşamıyorum.Yardımlarınız için size ve @if'e çok  teşekkür ederim.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 07 Eylül 2014 - 00:28:32

Allah Allah, modemlerde genelde olması lazım. Şu an önerim yok ne yazık ki, güzel ve geniş bir zamanda bakınmak lazım. Bir de, kopma olduğunda şunu bir geç lütfen:

Kod Seç Genişlet

dmesg | tail

İnternet kopmuyor derken koptu maalesef.Koptuğu anda komutun çıktışı şu şekildeydi:

Kod Seç Genişlet

[26659.241910] cfg80211: Calling CRDA for country: NA
[26714.615472] wlan0: deauthenticated from 00:02:61:74:3b:48 (Reason: 6)
[26714.651876] cfg80211: Calling CRDA to update world regulatory domain
[26714.654266] cfg80211: World regulatory domain updated:
[26714.654268] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[26714.654269] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[26714.654271] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[26714.654271] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[26714.654272] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[26714.654273] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)


[heartsmagic]

Bu Realtek8723 ne karın ağrısı bir kartmış. Şu başlıklar da bu karta ait sanırım:
https://forum.ubuntu-tr.net/index.php?topic=44043.0
Burada çözüm bulamamışız tam olarak.

https://forum.ubuntu-tr.net/index.php?topic=42235.5
Burada çözüm var gibi ama oradaki sürücü muhtemelen yeni çekirdekle derlenmeyecektir.


Şurada bir çözüm var gibi mi ne?
https://github.com/FreedomBen/rtl8188ce-linux-driver/tree/ubuntu-14.04

Burayı hatırlar gibiyim, Fransız arkadaşların şu başlığında denk gelmiştim sanırım:
http://forum.ubuntu-fr.org/viewtopic.php?id=1577391&p=1

Birilerine de denetmiş miydik ne pek hatırlayamıyorum şu an ne yazık ki. Denemekta fayda var ama:

Kod Seç Genişlet

sudo apt-get install git
git clone https://github.com/FreedomBen/rtl8188ce-linux-driver.git
cd rtl8188ce-linux-driver
sudo ./install.sh

Çıktıları geçersin buraya.



Şu dursun kenarda:
http://askubuntu.com/questions/139632/wireless-card-realtek-rtl8723ae-bt-is-not-recognized

[EkremC]

Çıktı şu şekilde:

Kod Seç Genişlet

ekrem@ekrem-GE70-2OC-2OE:~$ sudo apt-get install git
[sudo] password for ekrem:
Paket listeleri okunuyor... Bitti
Bağımlılık ağacı oluşturuluyor       
Durum bilgisi okunuyor... Bitti     
Aşağıdaki paketler otomatik olarak kurulmuş ve artık bu paketlere gerek duyulmuyor:
  kde-l10n-engb kde-l10n-tr
Bu paketleri kaldırmak için 'apt-get autoremove' komutunu kullanın.
Aşağıdaki ek paketler de kurulacak:
  git-man liberror-perl
Önerilen paketler:
  git-daemon-run git-daemon-sysvinit git-doc git-el git-email git-gui gitk
  gitweb git-arch git-bzr git-cvs git-mediawiki git-svn
Aşağıdaki YENİ paketler kurulacak:
  git git-man liberror-perl
0 paket yükseltilecek, 3 yeni paket kurulacak, 0 paket kaldırılacak ve 12 paket yükseltilmeyecek.
3.274 kB arşiv dosyası indirilecek.
Bu işlem tamamlandıktan sonra 21,6 MB ek disk alanı kullanılacak.
Devam etmek istiyor musunuz? [E/h] E
Alınıyor: 1 http://tr.archive.ubuntu.com/ubuntu/ trusty/main liberror-perl all 0.17-1.1 [21,1 kB]
Alınıyor: 2 http://tr.archive.ubuntu.com/ubuntu/ trusty/main git-man all 1:1.9.1-1 [698 kB]
Alınıyor: 3 http://tr.archive.ubuntu.com/ubuntu/ trusty/main git amd64 1:1.9.1-1 [2.555 kB]
2 sn.'de 3.274 kB alındı (1.177 kB/s)
Önceden seçili olmayan liberror-perl paketi seçiliyor.
(Veritabanı okunuyor... mevcut 253026 dosya veya klasör yüklü.)
Açılmaya hazırlanan .../liberror-perl_0.17-1.1_all.deb ...
liberror-perl (0.17-1.1) paketi açılıyor ...
Önceden seçili olmayan git-man paketi seçiliyor.
Açılmaya hazırlanan .../git-man_1%3a1.9.1-1_all.deb ...
git-man (1:1.9.1-1) paketi açılıyor ...
Önceden seçili olmayan git paketi seçiliyor.
Açılmaya hazırlanan .../git_1%3a1.9.1-1_amd64.deb ...
git (1:1.9.1-1) paketi açılıyor ...
man-db (2.6.7.1-1) için tetikleyiciler işleniyor ...
liberror-perl (0.17-1.1) ayarlanıyor...
git-man (1:1.9.1-1) ayarlanıyor...
git (1:1.9.1-1) ayarlanıyor...
ekrem@ekrem-GE70-2OC-2OE:~$ git clone https://github.com/FreedomBen/rtl8188ce-linux-driver.git
'rtl8188ce-linux-driver' dizinine çoğaltılıyor...
remote: Counting objects: 3473, done.
remote: Compressing objects: 100% (23/23), done.
remote: Total 3473 (delta 20), reused 0 (delta 0)
Nesneler alınıyor: 100% (3473/3473), 15.26 MiB | 1.16 MiB/s, done.
Farklar çözülüyor: 100% (2632/2632), done.
Checking connectivity... tamamlandı.
ekrem@ekrem-GE70-2OC-2OE:~$ cd rtl8188ce-linux-driver
ekrem@ekrem-GE70-2OC-2OE:~/rtl8188ce-linux-driver$
ekrem@ekrem-GE70-2OC-2OE:~/rtl8188ce-linux-driver$ sudo ./install.sh
-e
[*] So you want to live on the wild side and try a different driver for your RealTek wireless card eh?  Awesome!  I'll help you do it.
-e
[*] We are going to build and install the driver from source code, compiled specifically for your machine.

-e [*] If you want to do the build/install manually, there are instructions in the "README.md" file.
-e
[*] Please report any bugs/problems at https://github.com/FreedomBen/rtl8188ce-linux-driver

[*] Press <Enter> when ready to begin, or <Ctrl+C> to quit


Ben yüklemeden çıktım.Eğer yüklemem gerekiyorsa söyleyin hemen yükleyip onun da çıktısını geçeyim.

[if]

Yüklemeden önce bir şey deneyelim:

Kod Seç Genişlet

sudo iw reg get çıktısını alayım.

[EkremC]

Buyrun:

Kod Seç Genişlet

country 00:
(2402 - 2472 @ 40), (3, 20)
(2457 - 2482 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
(2474 - 2494 @ 20), (3, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS
(5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
(5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS