[Çözüldü] Asus x550ln, kablosuz ağ çalışmıyor

Başlatan namekrronn, 12 Ağustos 2014 - 00:49:14

« önceki - sonraki »

0 Üyeler ve 3 Ziyaretçi konuyu incelemekte.

namekrronn

asusx550ln modeli notebook um var linux mint 17 kde kurulu fakat wireless çalışmıyor windows 8 de çalışıyor sanırım driver eksik
ve birde fn tuşları ile parlaklık kontol edemiyorum.

gerekli çıktılar aşşağıdaki sıraya göre verdim

at /etc/lsb-release

uname -a

lspci

lsusb

rfkill list

sudo lshw -C network

ifconfig

iwconfig

iwlist scanning

lsmod

dmesg

dmesg | tail


DISTRIB_ID=LinuxMint
DISTRIB_RELEASE=17
DISTRIB_CODENAME=qiana
DISTRIB_DESCRIPTION="Linux Mint 17 Qiana"


Linux gavdo 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux


00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
00:04.0 Signal processing controller: Intel Corporation Device 0a03 (rev 09)
00:14.0 USB controller: Intel Corporation Lynx Point-LP USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation Lynx Point-LP HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation Lynx Point-LP HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 1 (rev e4)
00:1c.2 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 3 (rev e4)
00:1c.3 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 4 (rev e4)
00:1c.4 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 5 (rev e4)
00:1d.0 USB controller: Intel Corporation Lynx Point-LP USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Lynx Point-LP LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation Lynx Point-LP SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation Lynx Point-LP SMBus Controller (rev 04)
00:1f.6 Signal processing controller: Intel Corporation Lynx Point-LP Thermal (rev 04)
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5287 (rev 01)
02:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 12)
03:00.0 Network controller: Broadcom Corporation BCM43142 802.11b/g/n (rev 01)
04:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev a2)


Bus 001 Device 004: ID 0bb4:0004 HTC (High Tech Computer Corp.)
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 004: ID 04ca:2006 Lite-On Technology Corp.
Bus 002 Device 003: ID 04f2:b40a Chicony Electronics Co., Ltd
Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


0: asus-wlan: Wireless LAN
        Soft blocked: no
        Hard blocked: no
1: asus-bluetooth: Bluetooth
        Soft blocked: no
        Hard blocked: no


Bus 001 Device 004: ID 0bb4:0004 HTC (High Tech Computer Corp.)
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 004: ID 04ca:2006 Lite-On Technology Corp.
Bus 002 Device 003: ID 04f2:b40a Chicony Electronics Co., Ltd
Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


  *-network               
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0.1
       bus info: pci@0000:02:00.1
       logical name: eth0
       version: 12
       serial: 40:16:7e:87:40:38
       size: 10Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8411-2_0.0.1 07/08/13 latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       resources: irq:63 ioport:e000(size=256) memory:f7914000-f7914fff memory:f7910000-f7913fff
  *-network
       description: Network controller
       product: BCM43142 802.11b/g/n
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:03:00.0
       version: 01
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list
       configuration: driver=bcma-pci-bridge latency=0
       resources: irq:19 memory:f7800000-f7807fff
  *-network
       description: Ethernet interface
       physical id: 1
       logical name: usb0
       serial: 26:7b:bf:59:f6:b3
       capabilities: ethernet physical
       configuration: broadcast=yes driver=rndis_host driverversion=22-Aug-2005 firmware=RNDIS device ip=192.168.42.128 link=yes multicast=yes


eth0      Link encap:Ethernet  HWaddr 40:16:7e:87:40:38 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:2833 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2833 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:429572 (429.5 KB)  TX bytes:429572 (429.5 KB)

usb0      Link encap:Ethernet  HWaddr 26:7b:bf:59:f6:b3 
          inet addr:192.168.42.128  Bcast:192.168.42.255  Mask:255.255.255.0
          inet6 addr: fe80::247b:bfff:fe59:f6b3/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:618703 errors:19 dropped:0 overruns:0 frame:19
          TX packets:350401 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:881329591 (881.3 MB)  TX bytes:46480701 (46.4 MB)


usb0      no wireless extensions.

eth0      no wireless extensions.

lo        no wireless extensions.



usb0      Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

lo        Interface doesn't support scanning.


Module                  Size  Used by
rndis_host             14503  0
cdc_ether              14351  1 rndis_host
usbnet                 43877  2 rndis_host,cdc_ether
usb_storage            62209  0
rfcomm                 69160  0
bnep                   19624  2
uvcvideo               80885  0
bluetooth             395423  10 bnep,rfcomm
videobuf2_vmalloc      13216  1 uvcvideo
asus_nb_wmi            16990  0
videobuf2_memops       13362  1 videobuf2_vmalloc
videobuf2_core         40664  1 uvcvideo
asus_wmi               24191  1 asus_nb_wmi
videodev              134688  2 uvcvideo,videobuf2_core
sparse_keymap          13948  1 asus_wmi
joydev                 17381  0
snd_hda_codec_realtek    61438  1
snd_hda_codec_hdmi     46207  1
snd_hda_intel          52355  5
snd_hda_codec         192906  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep              13602  1 snd_hda_codec
snd_pcm               102099  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
snd_seq_midi           13324  0
snd_seq_midi_event     14899  1 snd_seq_midi
snd_rawmidi            30144  1 snd_seq_midi
snd_seq                61560  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              29482  2 snd_pcm,snd_seq
intel_rapl             18773  0
x86_pkg_temp_thermal    14205  0
intel_powerclamp       14705  0
snd                    69238  21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
coretemp               13435  0
soundcore              12680  1 snd
kvm_intel             143060  0
psmouse               102222  0
kvm                   451511  1 kvm_intel
serio_raw              13462  0
crct10dif_pclmul       14289  0
crc32_pclmul           13113  0
ghash_clmulni_intel    13259  0
aesni_intel            55624  0
aes_x86_64             17131  1 aesni_intel
lrw                    13286  1 aesni_intel
gf128mul               14951  1 lrw
glue_helper            13990  1 aesni_intel
ablk_helper            13597  1 aesni_intel
cryptd                 20359  3 ghash_clmulni_intel,aesni_intel,ablk_helper
rtsx_pci_ms            18151  0
memstick               16966  1 rtsx_pci_ms
mei_me                 18627  0
bcma                   52096  0
mei                    82274  1 mei_me
mac_hid                13205  0
lpc_ich                21080  0
parport_pc             32701  0
ppdev                  17671  0
lp                     17759  0
parport                42348  3 lp,ppdev,parport_pc
hid_generic            12548  0
usbhid                 52616  0
hid                   106148  3 hid_generic,usbhid
rtsx_pci_sdmmc         23274  0
nouveau              1097199  0
i915                  783485  6
mxm_wmi                13021  1 nouveau
ttm                    85115  1 nouveau
i2c_algo_bit           13413  2 i915,nouveau
drm_kms_helper         52758  2 i915,nouveau
ahci                   25819  2
r8169                  67581  0
libahci                32168  1 ahci
drm                   302817  7 ttm,i915,drm_kms_helper,nouveau
mii                    13934  2 r8169,usbnet
rtsx_pci               45956  2 rtsx_pci_ms,rtsx_pci_sdmmc
wmi                    19177  3 mxm_wmi,nouveau,asus_wmi
video                  19476  3 i915,nouveau,asus_wmi


[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE
[    0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE
[    0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x12f000000-0x12f1fffff]
[    0.000000]  [mem 0x12f000000-0x12f1fffff] page 2M
[    0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x12c000000-0x12effffff]
[    0.000000]  [mem 0x12c000000-0x12effffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
[    0.000000]  [mem 0x100000000-0x12bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xb99d0fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xb97fffff] page 2M
[    0.000000]  [mem 0xb9800000-0xb99d0fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xb99d8000-0xba204fff]
[    0.000000]  [mem 0xb99d8000-0xb99fffff] page 4k
[    0.000000]  [mem 0xb9a00000-0xba1fffff] page 2M
[    0.000000]  [mem 0xba200000-0xba204fff] page 4k
[    0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xba467000-0xc9915fff]
[    0.000000]  [mem 0xba467000-0xba5fffff] page 4k
[    0.000000]  [mem 0xba600000-0xc97fffff] page 2M
[    0.000000]  [mem 0xc9800000-0xc9915fff] page 4k
[    0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xc9b1e000-0xc9e44fff]
[    0.000000]  [mem 0xc9b1e000-0xc9bfffff] page 4k
[    0.000000]  [mem 0xc9c00000-0xc9dfffff] page 2M
[    0.000000]  [mem 0xc9e00000-0xc9e44fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
[    0.000000]  [mem 0xcafff000-0xcaffffff] page 4k
[    0.000000] RAMDISK: [mem 0x3494e000-0x3649efff]
[    0.000000] ACPI: RSDP 00000000000f0490 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 00000000c9ec9098 0000AC (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000c9edf1b8 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20131115/tbfadt-202)
[    0.000000] ACPI: DSDT 00000000c9ec9260 015F52 (v02 _ASUS_ Notebook 00000012 INTL 20120711)
[    0.000000] ACPI: FACS 00000000cab4f080 000040
[    0.000000] ACPI: APIC 00000000c9edf2c8 000072 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 00000000c9edf340 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: ECDT 00000000c9edf388 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: LPIT 00000000c9edf450 00005C (v01 _ASUS_ Notebook 00000000 AMI. 00000005)
[    0.000000] ACPI: SSDT 00000000c9edf4b0 000174 (v01  Intel zpoddult 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000c9edf628 000539 (v01  PmRef  Cpu0Ist 00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000c9edfb68 000AD8 (v01  PmRef    CpuPm 00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000c9ee0640 0002DE (v01  PmRef  Cpu0Tst 00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000c9ee0920 000348 (v01  PmRef    ApTst 00003000 INTL 20120711)
[    0.000000] ACPI: MCFG 00000000c9ee0c68 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000c9ee0ca8 003043 (v01 DptfTa DptfTabl 00001000 INTL 20120711)
[    0.000000] ACPI: HPET 00000000c9ee3cf0 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 00000000c9ee3d28 000298 (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000c9ee3fc0 003EDA (v01 SaSsdt  SaSsdt  00003000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000c9ee7ea0 000C51 (v01  SgRef    SgPch 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000c9ee8af8 001493 (v01 OptRef  OptTabl 00001000 INTL 20120711)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012f1fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x12f1fffff]
[    0.000000]   NODE_DATA [mem 0x12f1f4000-0x12f1f8fff]
[    0.000000]  [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012a800000-ffff88012e7fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x12f1fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009bfff]
[    0.000000]   node   0: [mem 0x00100000-0xb99d0fff]
[    0.000000]   node   0: [mem 0xb99d8000-0xba204fff]
[    0.000000]   node   0: [mem 0xba467000-0xc9915fff]
[    0.000000]   node   0: [mem 0xc9b1e000-0xc9e44fff]
[    0.000000]   node   0: [mem 0xcafff000-0xcaffffff]
[    0.000000]   node   0: [mem 0x100000000-0x12f1fffff]
[    0.000000] On node 0 totalpages: 1018736
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12840 pages used for memmap
[    0.000000]   DMA32 zone: 821717 pages, LIFO batch:31
[    0.000000]   Normal zone: 3016 pages used for memmap
[    0.000000]   Normal zone: 193024 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 56
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb99d1000-0xb99d7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xba205000-0xba466fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc9916000-0xc9b1dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xc9e45000-0xcab51fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcab52000-0xcaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcbbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcbc00000-0xcfdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88012ee00000 s86336 r8192 d24256 u524288
[    0.000000] pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1002795
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=e3c45166-a155-4014-a0c5-c1d5a4c261cb ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3898268K/4074944K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 176676K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]  Offload RCU callbacks from all CPUs
[    0.000000]  Offload RCU callbacks from CPUs: 0-3.
[    0.000000] NR_IRQS:16640 nr_irqs:984 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2294.496 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4588.99 BogoMIPS (lpj=9177984)
[    0.000007] pid_max: default: 32768 minimum: 301
[    0.000035] Security Framework initialized
[    0.000056] AppArmor: AppArmor initialized
[    0.000057] Yama: becoming mindful.
[    0.000500] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001686] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002181] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.002191] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.002438] Initializing cgroup subsys memory
[    0.002444] Initializing cgroup subsys devices
[    0.002446] Initializing cgroup subsys freezer
[    0.002448] Initializing cgroup subsys blkio
[    0.002450] Initializing cgroup subsys perf_event
[    0.002453] Initializing cgroup subsys hugetlb
[    0.002482] CPU: Physical Processor ID: 0
[    0.002484] CPU: Processor Core ID: 0
[    0.002489] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.002489] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.003762] mce: CPU supports 7 MCE banks
[    0.003779] CPU0: Thermal monitoring enabled (TM1)
[    0.003794] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.003794] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
[    0.003794] tlb_flushall_shift: 6
[    0.003943] Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
[    0.005303] ACPI: Core revision 20131115
[    0.029368] ACPI: All ACPI Tables successfully acquired
[    0.030412] ftrace: allocating 28408 entries in 111 pages
[    0.048256] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.088096] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz (fam: 06, model: 45, stepping: 01)
[    0.088105] TSC deadline timer enabled
[    0.090853] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[    0.090863] ... version:                3
[    0.090864] ... bit width:              48
[    0.090866] ... generic registers:      4
[    0.090867] ... value mask:             0000ffffffffffff
[    0.090869] ... max period:             0000ffffffffffff
[    0.090870] ... fixed-purpose events:   3
[    0.090872] ... event mask:             000000070000000f
[    0.093054] x86: Booting SMP configuration:
[    0.111354] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.093057] .... node  #0, CPUs:      #1 #2 #3
[    0.143802] x86: Booted up 1 node, 4 CPUs
[    0.143807] smpboot: Total of 4 processors activated (18355.96 BogoMIPS)
[    0.149105] devtmpfs: initialized
[    0.152033] EVM: security.selinux
[    0.152035] EVM: security.SMACK64
[    0.152036] EVM: security.ima
[    0.152037] EVM: security.capability
[    0.152095] PM: Registering ACPI NVS region [mem 0xb99d1000-0xb99d7fff] (28672 bytes)
[    0.152097] PM: Registering ACPI NVS region [mem 0xc9e45000-0xcab51fff] (13684736 bytes)
[    0.153332] pinctrl core: initialized pinctrl subsystem
[    0.153402] regulator-dummy: no parameters
[    0.153437] RTC time: 20:19:26, date: 08/11/14
[    0.153478] NET: Registered protocol family 16
[    0.153595] cpuidle: using governor ladder
[    0.153597] cpuidle: using governor menu
[    0.153645] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.153647] ACPI: bus type PCI registered
[    0.153649] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.153709] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.153713] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.163285] PCI: Using configuration type 1 for base access
[    0.164414] bio: create slab <bio-0> at 0
[    0.164624] ACPI: Added _OSI(Module Device)
[    0.164626] ACPI: Added _OSI(Processor Device)
[    0.164628] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.164630] ACPI: Added _OSI(Processor Aggregator Device)
[    0.169892] ACPI : EC: EC description table is found, configuring boot EC
[    0.175437] ACPI: Executed 2 blocks of module-level executable AML code
[    0.192885] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.205009] ACPI: SSDT 00000000c9b13c18 0003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20120711)
[    0.206322] ACPI: Dynamic OEM Table Load:
[    0.206324] ACPI: SSDT           (null) 0003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20120711)
[    0.209185] ACPI: SSDT 00000000c9b13618 0005AA (v01  PmRef    ApIst 00003000 INTL 20120711)
[    0.210606] ACPI: Dynamic OEM Table Load:
[    0.210609] ACPI: SSDT           (null) 0005AA (v01  PmRef    ApIst 00003000 INTL 20120711)
[    0.212982] ACPI: SSDT 00000000c9b12d98 000119 (v01  PmRef    ApCst 00003000 INTL 20120711)
[    0.214290] ACPI: Dynamic OEM Table Load:
[    0.214293] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20120711)
[    0.217940] ACPI: Interpreter enabled
[    0.217951] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.217960] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.217985] ACPI: (supports S0 S3 S4 S5)
[    0.217988] ACPI: Using IOAPIC for interrupt routing
[    0.218026] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.218442] ACPI: No dock devices found.
[    0.222700] ACPI: Power Resource [PC05] (on)
[    0.239264] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.239272] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.240014] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.240827] PCI host bridge to bus 0000:00
[    0.240831] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.240834] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.240836] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.240839] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.240841] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.240843] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.240845] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.240847] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.240849] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.240851] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.240853] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
[    0.240871] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[    0.241013] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[    0.241031] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[    0.241040] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.241047] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.241176] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[    0.241188] pci 0000:00:03.0: reg 0x10: [mem 0xf7a1c000-0xf7a1ffff 64bit]
[    0.241334] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
[    0.241351] pci 0000:00:04.0: reg 0x10: [mem 0xf7a10000-0xf7a17fff 64bit]
[    0.241512] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[    0.241534] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[    0.241603] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.241679] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.241719] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[    0.241743] pci 0000:00:16.0: reg 0x10: [mem 0xf7a25000-0xf7a2501f 64bit]
[    0.241823] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.241941] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[    0.241957] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a18000-0xf7a1bfff 64bit]
[    0.242031] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.242108] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.242140] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[    0.242214] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.242292] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.242326] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[    0.242400] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.242480] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.242511] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[    0.242585] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.242664] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.242695] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[    0.242769] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.242866] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.242908] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[    0.242932] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a23000-0xf7a233ff]
[    0.243035] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.243128] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.243165] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[    0.243386] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[    0.243404] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.243413] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.243422] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.243431] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.243439] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.243448] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a22000-0xf7a227ff]
[    0.243491] pci 0000:00:1f.2: PME# supported from D3hot
[    0.243590] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[    0.243606] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a21000-0xf7a210ff 64bit]
[    0.243629] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.243751] pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000
[    0.243785] pci 0000:00:1f.6: reg 0x10: [mem 0xf7a20000-0xf7a20fff 64bit]
[    0.244069] acpiphp: Slot [1] registered
[    0.244076] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.244183] pci 0000:02:00.0: [10ec:5287] type 00 class 0xff0000
[    0.244203] pci 0000:02:00.0: reg 0x10: [mem 0xf7915000-0xf7915fff]
[    0.244274] pci 0000:02:00.0: reg 0x30: [mem 0xf7900000-0xf790ffff pref]
[    0.244346] pci 0000:02:00.0: supports D1 D2
[    0.244348] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.244390] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.244436] pci 0000:02:00.1: [10ec:8168] type 00 class 0x020000
[    0.244454] pci 0000:02:00.1: reg 0x10: [io  0xe000-0xe0ff]
[    0.244486] pci 0000:02:00.1: reg 0x18: [mem 0xf7914000-0xf7914fff 64bit]
[    0.244506] pci 0000:02:00.1: reg 0x20: [mem 0xf7910000-0xf7913fff 64bit]
[    0.244589] pci 0000:02:00.1: supports D1 D2
[    0.244591] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.244629] pci 0000:02:00.1: System wakeup disabled by ACPI
[    0.248886] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.248891] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.248895] pci 0000:00:1c.2:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.249025] pci 0000:03:00.0: [14e4:4365] type 00 class 0x028000
[    0.249052] pci 0000:03:00.0: reg 0x10: [mem 0xf7800000-0xf7807fff 64bit]
[    0.249188] pci 0000:03:00.0: supports D1 D2
[    0.249190] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.249230] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.256899] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.256905] pci 0000:00:1c.3:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.256999] pci 0000:04:00.0: [10de:1341] type 00 class 0x030200
[    0.257015] pci 0000:04:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.257032] pci 0000:04:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.257048] pci 0000:04:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.257060] pci 0000:04:00.0: reg 0x24: [io  0xd000-0xd07f]
[    0.257071] pci 0000:04:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.257147] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.268874] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.268878] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.268882] pci 0000:00:1c.4:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.268888] pci 0000:00:1c.4:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.268937] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.270611] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[    0.270676] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.270738] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)
[    0.270798] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
[    0.270857] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.270917] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.270977] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[    0.271036] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
[    0.271983] ACPI: Enabled 5 GPEs in block 00 to 7F
[    0.271993] ACPI: \_SB_.PCI0: notify handler is installed
[    0.272154] Found 1 acpi root devices
[    0.272270] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[    0.272395] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.272401] vgaarb: loaded
[    0.272402] vgaarb: bridge control possible 0000:00:02.0
[    0.272595] SCSI subsystem initialized
[    0.272665] libata version 3.00 loaded.
[    0.272707] ACPI: bus type USB registered
[    0.272727] usbcore: registered new interface driver usbfs
[    0.272742] usbcore: registered new interface driver hub
[    0.272780] usbcore: registered new device driver usb
[    0.272922] PCI: Using ACPI for IRQ routing
[    0.274452] PCI: pci_cache_line_size set to 64 bytes
[    0.274513] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
[    0.274515] e820: reserve RAM buffer [mem 0xb99d1000-0xbbffffff]
[    0.274517] e820: reserve RAM buffer [mem 0xba205000-0xbbffffff]
[    0.274519] e820: reserve RAM buffer [mem 0xc9916000-0xcbffffff]
[    0.274521] e820: reserve RAM buffer [mem 0xc9e45000-0xcbffffff]
[    0.274524] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[    0.274526] e820: reserve RAM buffer [mem 0x12f200000-0x12fffffff]
[    0.274623] NetLabel: Initializing
[    0.274625] NetLabel:  domain hash size = 128
[    0.274626] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.274642] NetLabel:  unlabeled traffic allowed by default
[    0.274710] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.274719] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.276755] Switched to clocksource hpet
[    0.282892] AppArmor: AppArmor Filesystem Enabled
[    0.282918] pnp: PnP ACPI init
[    0.282932] ACPI: bus type PNP registered
[    0.283059] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.283065] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.283130] pnp 00:01: [dma 4]
[    0.283151] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.283174] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.283308] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.283491] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.283494] system 00:04: [io  0xffff] has been reserved
[    0.283496] system 00:04: [io  0xffff] has been reserved
[    0.283498] system 00:04: [io  0xffff] has been reserved
[    0.283501] system 00:04: [io  0x1c00-0x1cfe] has been reserved
[    0.283503] system 00:04: [io  0x1d00-0x1dfe] has been reserved
[    0.283506] system 00:04: [io  0x1e00-0x1efe] has been reserved
[    0.283508] system 00:04: [io  0x1f00-0x1ffe] has been reserved
[    0.283511] system 00:04: [io  0x1800-0x18fe] could not be reserved
[    0.283513] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.283517] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.283551] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.283609] system 00:06: [io  0x1854-0x1857] has been reserved
[    0.283613] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.283671] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.283674] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.283712] system 00:08: [io  0x0240-0x0259] has been reserved
[    0.283715] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.283786] pnp 00:09: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.283832] pnp 00:0a: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    0.284281] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.284611] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.284614] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.284617] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.284619] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.284622] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.284625] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.284627] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.284629] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.284632] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[    0.284635] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.284637] system 00:0c: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[    0.284640] system 00:0c: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.284643] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.284744] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.285171] pnp: PnP ACPI: found 14 devices
[    0.285172] ACPI: bus type PNP unregistered
[    0.291739] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.291753] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.291757] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.291763] pci 0000:00:1c.2:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.291771] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.291777] pci 0000:00:1c.3:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.291786] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.291789] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.291794] pci 0000:00:1c.4:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.291799] pci 0000:00:1c.4:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.291806] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.291809] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.291811] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.291813] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.291815] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.291817] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.291820] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.291822] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.291824] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.291826] pci_bus 0000:00: resource 13 [mem 0xcfe00000-0xfeafffff]
[    0.291829] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.291831] pci_bus 0000:02: resource 1 [mem 0xf7900000-0xf79fffff]
[    0.291834] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
[    0.291836] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.291838] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.291840] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.291879] NET: Registered protocol family 2
[    0.292069] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.292170] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.292270] TCP: Hash tables configured (established 32768 bind 32768)
[    0.292293] TCP: reno registered
[    0.292302] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.292325] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.292394] NET: Registered protocol family 1
[    0.292408] pci 0000:00:02.0: Boot video device
[    0.312876] PCI: CLS 64 bytes, default 64
[    0.312940] Trying to unpack rootfs image as initramfs...
[    0.963482] Freeing initrd memory: 27972K (ffff88003494e000 - ffff88003649f000)
[    0.963488] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.963492] software IO TLB [mem 0xc5916000-0xc9916000] (64MB) mapped at [ffff8800c5916000-ffff8800c9915fff]
[    0.963725] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
[    0.963731] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
[    0.963738] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
[    0.963747] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
[    0.963809] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.963812] Scanning for low memory corruption every 60 seconds
[    0.964104] Initialise system trusted keyring
[    0.964161] audit: initializing netlink socket (disabled)
[    0.964172] type=2000 audit(1407788366.948:1): initialized
[    1.002672] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.004108] VFS: Disk quotas dquot_6.5.2
[    1.004158] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.004658] fuse init (API version 7.22)
[    1.004736] msgmni has been set to 7668
[    1.004794] Key type big_key registered
[    1.005250] Key type asymmetric registered
[    1.005252] Asymmetric key parser 'x509' registered
[    1.005286] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.005327] io scheduler noop registered
[    1.005329] io scheduler deadline registered (default)
[    1.005355] io scheduler cfq registered
[    1.005595] pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X
[    1.005774] pcieport 0000:00:1c.2: irq 57 for MSI/MSI-X
[    1.005936] pcieport 0000:00:1c.3: irq 58 for MSI/MSI-X
[    1.006097] pcieport 0000:00:1c.4: irq 59 for MSI/MSI-X
[    1.006182] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.006187] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    1.006206] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    1.006209] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.006211] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[    1.006215] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    1.006233] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    1.006235] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.006239] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    1.006257] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    1.006260] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    1.006264] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    1.006277] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.006293] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.006335] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    1.006337] vesafb: scrolling: redraw
[    1.006339] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.007012] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004780000, using 4160k, total 4160k
[    1.136404] Console: switching to colour frame buffer device 170x48
[    1.265409] fb0: VESA VGA frame buffer device
[    1.265432] intel_idle: MWAIT substates: 0x11142120
[    1.265433] intel_idle: v0.4 model 0x45
[    1.265435] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.265603] ipmi message handler version 39.2
[    1.272325] ACPI: AC Adapter [AC0] (off-line)
[    1.272452] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    1.273228] ACPI: Lid Switch [LID]
[    1.273269] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    1.273274] ACPI: Sleep Button [SLPB]
[    1.273308] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.273311] ACPI: Power Button [PWRF]
[    1.276520] thermal LNXTHERM:00: registered as thermal_zone0
[    1.276523] ACPI: Thermal Zone [THRM] (52 C)
[    1.276582] GHES: HEST is not enabled!
[    1.276683] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.278308] Linux agpgart interface v0.103
[    1.279834] brd: module loaded
[    1.280695] loop: module loaded
[    1.281079] libphy: Fixed MDIO Bus: probed
[    1.281170] tun: Universal TUN/TAP device driver, 1.6
[    1.281172] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.281221] PPP generic driver version 2.4.2
[    1.281264] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.281268] ehci-pci: EHCI PCI platform driver
[    1.281410] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.281416] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.281431] ehci-pci 0000:00:1d.0: debug port 2
[    1.285331] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.285353] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a23000
[    1.296204] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.296260] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.296263] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.296265] usb usb1: Product: EHCI Host Controller
[    1.296267] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    1.296269] usb usb1: SerialNumber: 0000:00:1d.0
[    1.297187] hub 1-0:1.0: USB hub found
[    1.297197] hub 1-0:1.0: 2 ports detected
[    1.297706] ACPI: Battery Slot [BAT0] (battery present)
[    1.297812] ehci-platform: EHCI generic platform driver
[    1.297822] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.297824] ohci-pci: OHCI PCI platform driver
[    1.297835] ohci-platform: OHCI generic platform driver
[    1.297843] uhci_hcd: USB Universal Host Controller Interface driver
[    1.298005] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.298011] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.298094] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.298116] xhci_hcd 0000:00:14.0: irq 60 for MSI/MSI-X
[    1.298190] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.298192] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.298194] usb usb2: Product: xHCI Host Controller
[    1.298196] usb usb2: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
[    1.298198] usb usb2: SerialNumber: 0000:00:14.0
[    1.298320] hub 2-0:1.0: USB hub found
[    1.298335] hub 2-0:1.0: 9 ports detected
[    1.301762] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.301767] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.301812] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    1.301815] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.301817] usb usb3: Product: xHCI Host Controller
[    1.301819] usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
[    1.301821] usb usb3: SerialNumber: 0000:00:14.0
[    1.301940] hub 3-0:1.0: USB hub found
[    1.301954] hub 3-0:1.0: 4 ports detected
[    1.308264] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.310836] i8042: Detected active multiplexing controller, rev 1.1
[    1.312543] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.312549] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.312574] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.312594] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.312612] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.312734] mousedev: PS/2 mouse device common for all mice
[    1.312904] rtc_cmos 00:05: RTC can wake from S4
[    1.313042] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.313071] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.313141] device-mapper: uevent: version 1.0.3
[    1.313207] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.313214] ledtrig-cpu: registered to indicate activity on CPUs
[    1.313331] TCP: cubic registered
[    1.313423] NET: Registered protocol family 10
[    1.313608] NET: Registered protocol family 17
[    1.313617] Key type dns_resolver registered
[    1.313863] Loading compiled-in X.509 certificates
[    1.315030] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
[    1.315047] registered taskstats version 1
[    1.318002] Key type trusted registered
[    1.320526] Key type encrypted registered
[    1.322988] AppArmor: AppArmor sha1 policy hashing enabled
[    1.322993] IMA: No TPM chip found, activating TPM-bypass!
[    1.323563] regulator-dummy: disabling
[    1.323631]   Magic number: 10:232:346
[    1.323658] tty tty63: hash matches
[    1.323743] rtc_cmos 00:05: setting system clock to 2014-08-11 20:19:27 UTC (1407788367)
[    1.324665] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.324668] EDD information not available.
[    1.324717] PM: Hibernation image not present or could not be loaded.
[    1.325558] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
[    1.325560] Write protecting the kernel read-only data: 12288k
[    1.327514] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
[    1.328918] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
[    1.345742] systemd-udevd[117]: starting version 204
[    1.351732] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.364530] wmi: Mapper loaded
[    1.372747] rtsx_pci 0000:02:00.0: irq 61 for MSI/MSI-X
[    1.372759] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 61
[    1.376373] [drm] Initialized drm 1.1.0 20060810
[    1.376379] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.376392] r8169 0000:02:00.1: can't disable ASPM; OS doesn't have ASPM control
[    1.376587] ahci 0000:00:1f.2: version 3.0
[    1.376688] ahci 0000:00:1f.2: irq 62 for MSI/MSI-X
[    1.376716] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.384578] r8169 0000:02:00.1: irq 63 for MSI/MSI-X
[    1.384779] r8169 0000:02:00.1 eth0: RTL8411 at 0xffffc90000664000, 40:16:7e:87:40:38, XID 1c800800 IRQ 63
[    1.384782] r8169 0000:02:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.392837] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[    1.392842] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo only pio slum part deso sadm sds apst
[    1.393392] scsi0 : ahci
[    1.393474] scsi1 : ahci
[    1.393533] scsi2 : ahci
[    1.393593] scsi3 : ahci
[    1.393636] ata1: SATA max UDMA/133 abar m2048@0xf7a22000 port 0xf7a22100 irq 62
[    1.393639] ata2: SATA max UDMA/133 abar m2048@0xf7a22000 port 0xf7a22180 irq 62
[    1.393641] ata3: DUMMY
[    1.393643] ata4: DUMMY
[    1.397443] [drm] Memory usable by graphics device = 2048M
[    1.397449] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[    1.397451] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    1.397467] Console: switching to colour dummy device 80x25
[    1.407364] MXM: GUID detected in BIOS
[    1.407388] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
[    1.407470] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[    1.407694] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[    1.408020] pci 0000:04:00.0: optimus capabilities: enabled, status dynamic power,
[    1.408023] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.RP05.PEGP handle
[    1.448248] i915 0000:00:02.0: irq 64 for MSI/MSI-X
[    1.448262] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.448264] [drm] Driver supports precise vblank timestamp query.
[    1.448352] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.514568] fbcon: inteldrmfb (fb0) is primary device
[    1.608150] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.712035] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.740402] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[    1.740405] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.740733] hub 1-1:1.0: USB hub found
[    1.740903] hub 1-1:1.0: 8 ports detected
[    1.768492] ata1.00: ATA-8: TOSHIBA MQ01ABF050, AM0B1J, max UDMA/100
[    1.768494] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.770481] ata1.00: configured for UDMA/100
[    1.770683] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABF0 AM0B PQ: 0 ANSI: 5
[    1.770861] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.770863] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.770869] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.770932] sd 0:0:0:0: [sda] Write Protect is off
[    1.770934] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.770967] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.875873]  sda: sda1 sda2 sda3 sda4
[    1.876700] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.907982] usb 2-1: new full-speed USB device number 2 using xhci_hcd
[    1.926573] usb 2-1: New USB device found, idVendor=046d, idProduct=c52f
[    1.926575] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.926577] usb 2-1: Product: USB Receiver
[    1.926578] usb 2-1: Manufacturer: Logitech
[    1.930396] hidraw: raw HID events driver (C) Jiri Kosina
[    1.933911] usbcore: registered new interface driver usbhid
[    1.933912] usbhid: USB HID core driver
[    1.935477] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input8
[    1.935599] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
[    1.936334] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/input/input9
[    1.936442] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
[    1.959872] tsc: Refined TSC clocksource calibration: 2294.688 MHz
[    2.087837] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.089403] ata2.00: ATAPI: MATSHITADVD-RAM UJ8E2 S, 1.00, max UDMA/133
[    2.090965] ata2.00: configured for UDMA/133
[    2.091848] usb 2-5: new high-speed USB device number 3 using xhci_hcd
[    2.093365] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8E2 S  1.00 PQ: 0 ANSI: 5
[    2.097608] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.097609] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.097778] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.097868] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.140811] usb 2-5: New USB device found, idVendor=04f2, idProduct=b40a
[    2.140813] usb 2-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.140815] usb 2-5: Product: USB2.0 HD UVC WebCam
[    2.140816] usb 2-5: Manufacturer: Chicony Electronics Co.,Ltd.
[    2.140817] usb 2-5: SerialNumber: 0x0001
[    2.307730] usb 2-6: new full-speed USB device number 4 using xhci_hcd
[    2.325280] usb 2-6: New USB device found, idVendor=04ca, idProduct=2006
[    2.325282] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.325284] usb 2-6: Product: BCM43142A0
[    2.325285] usb 2-6: Manufacturer: Broadcom Corp
[    2.325286] usb 2-6: SerialNumber: 28E3479176AB
[    2.827461] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    2.959375] Switched to clocksource tsc
[    3.099207] Console: switching to colour frame buffer device 170x48
[    3.103740] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.103742] i915 0000:00:02.0: registered panic notifier
[    3.104242] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    3.108821] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    3.113958] acpi device:23: registered as cooling_device4
[    3.114008] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:13/LNXVIDEO:00/input/input10
[    3.115358] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.118803] acpi device:79: registered as cooling_device5
[    3.123403] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11
[    3.123501] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.123660] [drm] hdmi device  not found 4 0 1
[    3.123902] nouveau E[  DEVICE][0000:04:00.0] unknown chipset, 0x118010a2
[    3.123905] nouveau E[     DRM] failed to create 0x80000080, -22
[    3.124125] nouveau: probe of 0000:04:00.0 failed with error -22
[    3.265953] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.882283] random: init urandom read with 124 bits of entropy available
[    3.958086] random: nonblocking pool is initialized
[    5.155666] Adding 8000508k swap on /dev/sda4.  Priority:-1 extents:1 across:8000508k FS
[    5.582943] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[    5.824476] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.023270] systemd-udevd[363]: starting version 204
[    6.593861] lp: driver loaded but no devices found
[    6.762986] ppdev: user-space parallel port driver
[    7.031400] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \GPIS 1 (20131115/utaddress-251)
[    7.031408] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 2 (20131115/utaddress-251)
[    7.031414] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.031418] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[    7.031423] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GP01 2 (20131115/utaddress-251)
[    7.031427] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 3 (20131115/utaddress-251)
[    7.031431] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.031433] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[    7.031437] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GP01 2 (20131115/utaddress-251)
[    7.031441] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 3 (20131115/utaddress-251)
[    7.031445] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.031447] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.124705] bcma: bus0: Found chip with id 0xA886, rev 0x01 and package 0x08
[    7.124727] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x28, class 0x0)
[    7.124744] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x21, class 0x0)
[    7.124777] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x16, class 0x0)
[    7.124819] bcma: bus0: Core 3 found: UNKNOWN (manuf 0x43B, id 0x368, rev 0x00, class 0x0)
[    7.139055] bcma: bus0: Bus registered
[    7.194389] mei_me 0000:00:16.0: irq 65 for MSI/MSI-X
[    7.753277] intel_rapl: domain uncore energy ctr 5162:5162 not working, skip
[    7.879836] psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    8.054541] HDA driver get symbol successfully from i915 module
[    8.054661] snd_hda_intel 0000:00:1b.0: irq 66 for MSI/MSI-X
[    8.060450] snd_hda_intel 0000:00:03.0: irq 67 for MSI/MSI-X
[    8.123975] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    8.124283] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    8.124319] SKU: Nid=0x1d sku_cfg=0x40479a2d
[    8.124321] SKU: port_connectivity=0x1
[    8.124322] SKU: enable_pcbeep=0x0
[    8.124324] SKU: check_sum=0x00000007
[    8.124325] SKU: customization=0x0000009a
[    8.124326] SKU: external_amp=0x5
[    8.124328] SKU: platform_type=0x1
[    8.124329] SKU: swap=0x0
[    8.124330] SKU: override=0x1
[    8.124417] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[    8.124761] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    8.124765]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.124766]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    8.124768]    mono: mono_out=0x0
[    8.124769]    inputs:
[    8.124809]      Internal Mic=0x1a
[    8.124811]      Mic=0x19
[    8.124838] realtek: No valid SSID, checking pincfg 0x40479a2d for NID 0x1d
[    8.124840] realtek: Enabling init ASM_ID=0x9a2d CODEC_ID=10ec0233
[    8.129964] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[    8.130058] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[    8.385352] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[    8.400010] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[    8.469628] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input15
[    8.480658] Linux video capture interface: v2.00
[    8.515047] asus_wmi: ASUS WMI generic driver loaded
[    8.525569] asus_wmi: Initialization: 0x1
[    8.525605] asus_wmi: BIOS WMI version: 7.9
[    8.525644] asus_wmi: SFUN value: 0x4a0877
[    8.526617] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input21
[    8.533359] asus_wmi: Backlight controlled by ACPI video driver
[    8.559594] Bluetooth: Core ver 2.17
[    8.559615] NET: Registered protocol family 31
[    8.559617] Bluetooth: HCI device and connection manager initialized
[    8.559625] Bluetooth: HCI socket layer initialized
[    8.559628] Bluetooth: L2CAP socket layer initialized
[    8.559633] Bluetooth: SCO socket layer initialized
[    8.746406] init: cups main process (593) killed by HUP signal
[    8.746416] init: cups main process ended, respawning
[    8.752352] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b40a)
[    8.753509] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input22
[    8.753585] usbcore: registered new interface driver uvcvideo
[    8.753587] USB Video Class driver (1.1.1)
[    8.777611] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.777614] Bluetooth: BNEP filters: protocol multicast
[    8.777622] Bluetooth: BNEP socket layer initialized
[    8.902331] Bluetooth: RFCOMM TTY layer initialized
[    8.902342] Bluetooth: RFCOMM socket layer initialized
[    8.902347] Bluetooth: RFCOMM ver 1.11
[    9.283612] init: failsafe main process (550) killed by TERM signal
[   13.343626] r8169 0000:02:00.1 eth0: link down
[   13.343674] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.343959] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.395171] init: samba-ad-dc main process (742) terminated with status 1
[   19.917954] init: alsa-restore main process (1124) terminated with status 99
[   21.299774] init: plymouth-upstart-bridge main process ended, respawning
[   21.304741] init: plymouth-upstart-bridge main process (1306) terminated with status 1
[   21.304752] init: plymouth-upstart-bridge main process ended, respawning
[   22.071703] init: plymouth-stop pre-start process (1388) terminated with status 1
[   83.888346] init: anacron main process (1125) killed by TERM signal
[  173.096951] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[  173.190152] usb 1-1.3: New USB device found, idVendor=0bb4, idProduct=0c03
[  173.190162] usb 1-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[  173.190167] usb 1-1.3: Product: Discovery
[  173.190171] usb 1-1.3: Manufacturer: GM
[  173.190175] usb 1-1.3: SerialNumber: RG79INL7W4K7MRON
[  173.524473] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[  173.524625] scsi4 : usb-storage 1-1.3:1.0
[  173.524790] usbcore: registered new interface driver usb-storage
[  174.524795] scsi 4:0:0:0: Direct-Access     GM       Discovery        0000 PQ: 0 ANSI: 2
[  174.525272] scsi 4:0:0:1: Direct-Access     GM       Discovery        0000 PQ: 0 ANSI: 2
[  174.525759] sd 4:0:0:0: Attached scsi generic sg2 type 0
[  174.526112] sd 4:0:0:1: Attached scsi generic sg3 type 0
[  174.535539] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[  174.536044] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[  184.354818] usb 1-1.3: USB disconnect, device number 3
[  184.634518] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[  184.727676] usb 1-1.3: New USB device found, idVendor=0bb4, idProduct=0004
[  184.727681] usb 1-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[  184.727684] usb 1-1.3: Product: Discovery
[  184.727686] usb 1-1.3: Manufacturer: GM
[  184.727688] usb 1-1.3: SerialNumber: RG79INL7W4K7MRON
[  184.794501] usbcore: registered new interface driver cdc_ether
[  184.800994] rndis_host 1-1.3:1.0 usb0: register 'rndis_host' at usb-0000:00:1d.0-1.3, RNDIS device, 26:7b:bf:59:f6:b3
[  184.801126] usbcore: registered new interface driver rndis_host
[ 2243.677737] init: upstart-udev-bridge main process (352) terminated with status 1
[ 2243.677769] init: upstart-udev-bridge main process ended, respawning
[ 2243.678177] init: upstart-file-bridge main process (398) terminated with status 1
[ 2243.678199] init: upstart-file-bridge main process ended, respawning
[ 2243.678562] init: upstart-socket-bridge main process (612) terminated with status 1
[ 2243.678584] init: upstart-socket-bridge main process ended, respawning
[ 2246.234654] init: upstart-udev-bridge main process (7368) terminated with status 1
[ 2246.234708] init: upstart-udev-bridge main process ended, respawning
[ 2246.235212] init: upstart-socket-bridge main process (7371) terminated with status 1
[ 2246.235235] init: upstart-socket-bridge main process ended, respawning
[ 2246.235572] init: upstart-file-bridge main process (7374) terminated with status 1
[ 2246.235592] init: upstart-file-bridge main process ended, respawning
[ 2455.937216] QThread[8213]: segfault at e0 ip 000000000040d22e sp 00007fa5a0dff6d0 error 4 in qaptworker2[400000+1f000]
[ 4777.807724] init: upstart-udev-bridge main process (7417) terminated with status 1
[ 4777.807743] init: upstart-udev-bridge main process ended, respawning
[ 4777.807946] init: upstart-socket-bridge main process (7421) terminated with status 1
[ 4777.807955] init: upstart-socket-bridge main process ended, respawning
[ 4777.808099] init: upstart-file-bridge main process (7422) terminated with status 1
[ 4777.808108] init: upstart-file-bridge main process ended, respawning
[ 4984.210045] init: smbd main process (606) killed by TERM signal
[ 5582.491024] init: upstart-file-bridge main process (18894) terminated with status 1
[ 5582.491049] init: upstart-file-bridge main process ended, respawning
[ 5582.491350] init: upstart-socket-bridge main process (18895) terminated with status 1
[ 5582.491367] init: upstart-socket-bridge main process ended, respawning
[ 5582.491542] init: upstart-udev-bridge main process (18899) terminated with status 1
[ 5582.491553] init: upstart-udev-bridge main process ended, respawning
[ 5582.918706] init: upstart-file-bridge main process (28745) terminated with status 1
[ 5582.918725] init: upstart-file-bridge main process ended, respawning
[ 5582.918922] init: upstart-socket-bridge main process (28744) terminated with status 1
[ 5582.918932] init: upstart-socket-bridge main process ended, respawning
[ 5582.919086] init: upstart-udev-bridge main process (28749) terminated with status 1
[ 5582.919096] init: upstart-udev-bridge main process ended, respawning
[ 5696.916038] init: samba-ad-dc main process (30871) terminated with status 1


[ 5582.491367] init: upstart-socket-bridge main process ended, respawning
[ 5582.491542] init: upstart-udev-bridge main process (18899) terminated with status 1
[ 5582.491553] init: upstart-udev-bridge main process ended, respawning
[ 5582.918706] init: upstart-file-bridge main process (28745) terminated with status 1
[ 5582.918725] init: upstart-file-bridge main process ended, respawning
[ 5582.918922] init: upstart-socket-bridge main process (28744) terminated with status 1
[ 5582.918932] init: upstart-socket-bridge main process ended, respawning
[ 5582.919086] init: upstart-udev-bridge main process (28749) terminated with status 1
[ 5582.919096] init: upstart-udev-bridge main process ended, respawning
[ 5696.916038] init: samba-ad-dc main process (30871) terminated with status 1

neynefes


namekrronn


neynefes


namekrronn

Alıntı yapılan: neynefes - 12 Ağustos 2014 - 01:16:02
Usb alıcı ile mi bağlantı sağlıyorsunuz?
hayır kendi dahili wifi sürücüsü var ekstra aparat kullanmıyorum eğer interneti soruyorsanız android telefonla kablosuz ağa bağlanıp onu da usb kablosu ile bilgisayarla paylaştım ethernet gibi algıladı

neynefes

@namekrronn, şu adresteki "LINUX driver for kernel 3.x and 2.6.x and 2.4.x" sürücüsünü yükleyip dener misin herhangi birini indirebilirsin o sıradaki.

http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false#2

Yanlız tam olarak kurulum aşamalarını bilmiyorum :) Bu kadar bilgiye erişebildim kusura bakma :)
Umarım yanlış yönlendirmemişimdir.

heartsmagic

Kart Realtek değil de (kablolu sanırım o) Broadcom, modeli de:
03:00.0 Network controller: Broadcom Corporation BCM43142 802.11b/g/n (rev 01)

Kablo ile bağlanabiliyorsan:
sudo apt-get remove bcmwl-kernel-source
sudo apt-get update
sudo apt-get install firmware-b43-installer
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

neynefes

Yeni farkettim. Dün görmemişim kartı o yüzden realtek üzerinden aradım.

namekrronn

#8
Alıntı yapılan: heartsmagic - 12 Ağustos 2014 - 10:46:25
Kart Realtek değil de (kablolu sanırım o) Broadcom, modeli de:
03:00.0 Network controller: Broadcom Corporation BCM43142 802.11b/g/n (rev 01)

Kablo ile bağlanabiliyorsan:
sudo apt-get remove bcmwl-kernel-source
sudo apt-get update
sudo apt-get install firmware-b43-installer


hocam yükledim yeniden başlattım pc yi malesef yine aynı


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 12 Ağustos 2014 - 14:29:13

Alıntı yapılan: neynefes - 12 Ağustos 2014 - 12:04:03
Yeni farkettim. Dün görmemişim kartı o yüzden realtek üzerinden aradım.
bende tar.gz kyi kurmaya çalışıyordum hocam :D

heartsmagic

Mint 17 hangi dağıtım üzerine temelli?
lsmod
ifconfig

çıktılarını tekrar geçer misin?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

namekrronn

Alıntı yapılan: heartsmagic - 13 Ağustos 2014 - 02:02:29
Mint 17 hangi dağıtım üzerine temelli?
lsmod
ifconfig

çıktılarını tekrar geçer misin?
ubuntu 14.04 üzerine temelli , tekrar linux silip kurdum sizin verdiğiniz komutları tekrar girip yükeliyp öyle mi vereyim o çıktıları yoksa normal saf haliyle mi

speakerXXL

Buradaki bilgiye göre sizin kablosuz ağ kartınız için Broadcom sahipli sürücüsünü kurmak en uygunu olacağını düşünüyorum. Bunun için önce kurduğunuz firmware-b43-installer paketini aşağıdaki komut ile kaldırmanızı öneririm.

sudo apt-get purge firmware-b43-installer

Şimdi menüden aratıp sürücü yöneticisini açınız. Kurulumu yaptığınız medyayı (DVD/USB) takarak internet bağlantınız olmadan dahi kablosuz ağ sürücünüzü yükleyebilmeniz gerekir, bunun için sürücü yöneticisini açtığınızda bu medyada bulunan bazı sürücüler için depoyu (DVD/USB) etkinleştirmelisiniz. Bu araç yardımıyla bcmwl-kernel-source sürücüsünü kurup sisteminizi yeniden başlatmayı deneyiniz.


namekrronn

Alıntı yapılan: speakerXXL - 13 Ağustos 2014 - 11:59:42
Buradaki bilgiye göre sizin kablosuz ağ kartınız için Broadcom sahipli sürücüsünü kurmak en uygunu olacağını düşünüyorum. Bunun için önce kurduğunuz firmware-b43-installer paketini aşağıdaki komut ile kaldırmanızı öneririm.

sudo apt-get purge firmware-b43-installer

Şimdi menüden aratıp sürücü yöneticisini açınız. Kurulumu yaptığınız medyayı (DVD/USB) takarak internet bağlantınız olmadan dahi kablosuz ağ sürücünüzü yükleyebilmeniz gerekir, bunun için sürücü yöneticisini açtığınızda bu medyada bulunan bazı sürücüler için depoyu (DVD/USB) etkinleştirmelisiniz. Bu araç yardımıyla bcmwl-kernel-source sürücüsünü kurup sisteminizi yeniden başlatmayı deneyiniz.



evet hocam sorun çözülmüştür bu yöntemle teşekkürler