Ubuntu 14.04 - renk tonu geçişlerini görüntüleme sorunu

[delice_doluca]

Merhaba,

Yine çok ilginç bir sorunla geliyorum size. Durumu Türkçe anlatmakta bile zorlandığım için İngilizce aramayı hiç yapamadım ve kısaca karşınıza araştırma yap(a)madan gelip direk sorumu soruyorum diyebiliriz.

Sorun kısaca şöyle; zaman zaman web sayfalarındaki ya da cihazımda yüklü olan resimlerde aynı rengin tonları arasında bozuk bir geçiş oluyor. Bazen dakikalar sonra aynı görüntüyü açtığımda (ya da cihazı baştan başlatınca) bu sorun ortadan kalkmış oluyor.

Renk geçişiyle ilgili durumu şöyle ifade etmeye çalışayım; diyelim ki tek renk tişört giymiş birisinin fotosu var elimde. Rengi de kırmızı olsun. Gerçek hayatta bu insanın vücudu 3 boyutlu ve silinidirik olduğu için kırmızının heryerini aynı "tonda" görmeyiz, özellikle de fazla ışığın ve gölgenin olduğu bir ortamda kırmızının gölgeli ve koyu halleri olur, aydınlık ve açık halleri olur vs.. Ancak biz yine de bu geçişleri o kadar yumuşak bir şekilde görür ve algılarız ki sonuçta onun tek bir renk tişört olduğunu, farklı renk tonları olmasının sebebinin her noktasının aynı miktarda ışık almaması olduğunu biliriz. Keza resme bakınca da aynı durum söz konusu olur.

Peki benim ekranımda nasıl görünüyor? Sadece 256 renk görüntüleyebilen, düşük çözünürlüklü, ilk renkli ekranlı Nokia telefonları hatırlıyor musunuz? Bir rengin milyonlarca tonunu binlerce pikselle görüntüleyemediği için o geçişleri genelde 2-3 farklı ton varmış ve bunlar bir şekilde yanyana yapıştırılmış gibi görünürdü. Özellikle insan teni yer yer kırmızı, kahverengi gibi belirgin tonlamalara sahip olurdu ve kareli kareli bu geçişler gösterilirdi. İşte benim yaşadığım sorun da birebir bunun aynısı .

Özellikle morun veya koyu/soluk renklerin ağırlıklı olduğu ortamlarda bu durum ortaya daha çok çıkıyor. Dediğim gibi de zaman zaman düzeliyor.


Şu ana kadar yapabildiğim tespitler;

- Bu durumun zaman zaman gelmesi donanımsal bir sorun olmadığını dorğuluyor gibi. Windows'ta ise hiç yaşamamış olmam en büyük kanıtı.
- Sadece web sayfalarında değil resimlerde de aynı durumun olması sorunun tek bir uygulamaya özgü değil, daha çok resimleri işleyen yazılımla alakalı olduğunu düşündürtüyor (öyle bir yazılım var di mi? )


Cihazımın donanımı: Samsung r580 dizüstü bilgisayar, Geforge 330M ekran kartı, i5 işlemci,

Yazılımı: Ubuntu 14.04, açık kaynak grafik sürücüleri devre dışı, Geforce tarafından sağlanan 331.38 kodlu, test edilmiş sürücü etkin halde.

Şu ana kadar kurduğum ekrana müdahale edebilecek yazılımlar; Wallch (duvar kağıtlarını değiştirmek için, ki bu sorun duvar kağıtlarımda kesinlikle yok), bir de ekran parlaklığının açılıp kapanabilmesini sağlamak için xorg.conf dosyası oluşturdum.

Yardımlarınız için şimdiden teşekkür ederim.

[heartsmagic]

Açık kaynaklı sürücülere bir geçip dener misin? Bakalım durum sahipli sürücüler tarafında mı?

[delice_doluca]

Açık kaynaklı sürücülere bir geçip dener misin? Bakalım durum sahipli sürücüler tarafında mı?

Denedim, sorun aynen devam ediyor. Hatta şu an kalıcı olmaya başladı diyebilirim, dügün haline hiç dönmedi. En belirgin olduğu nokta kırmızı rengin fazlalaşması. Mesela mavi, siyah ve gri kablolarla döşeli bir gri klemens setinin resmini çektim, mavi olan kablolar garip bir mor tonunda görünüyorlar, tüm resme kırmızı filtre uygulanmış gibi neredeyse (ama renkler açılıp beyaza yaklaştıkça sorun daha az görünür oluyor).

[heartsmagic]

Açıkçası sorun nereden kaynaklanıyor tahmin edemiyorum. Sürücülerde olduğunu düşünüyordum, ne yazık ki o tahminim tutmadı. Canlı CD ile geçici bir sistem açtığında durum aynı mı? Bir de, sisteme yeni bir kullanıcı açıp onunla deneyebilirsin.

[delice_doluca]

Açıkçası sorun nereden kaynaklanıyor tahmin edemiyorum. Sürücülerde olduğunu düşünüyordum, ne yazık ki o tahminim tutmadı. Canlı CD ile geçici bir sistem açtığında durum aynı mı? Bir de, sisteme yeni bir kullanıcı açıp onunla deneyebilirsin.

Canlı CD ile denedim, oradan facebook'a girip birkaç resme bakınca birebir aynı sorunun devam ettiğini gördüm. Daha önce hiç canlı CD'de iken bir resme bakmadığım için sorun belki de hep oradaydı ama ben farkedemedim.

Aklınıza başka neler geliyor?

[bytan]

Belki bir ihtimal log dosyalarında bir şeyler vardır:

Kod Seç Genişlet

cat /var/log/Xorg.0.log
cat /var/log/kern.log

[delice_doluca]

Belki bir ihtimal log dosyalarında bir şeyler vardır:

Kod Seç Genişlet

cat /var/log/Xorg.0.log
cat /var/log/kern.log

Xorg için;

Kod Seç Genişlet

[    14.312] compiled for 1.15.1, module version = 0.0.2
[    14.312] ABI class: X.Org Video Driver, version 15.0
[    14.313] (WW) Falling back to old probe method for vesa
[    14.313] (II) Loading sub module "dri2"
[    14.313] (II) LoadModule: "dri2"
[    14.313] (II) Module "dri2" already built-in
[    14.313] (--) NOUVEAU(0): Chipset: "NVIDIA NVA8"
[    14.313] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    14.313] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    14.313] (==) NOUVEAU(0): RGB weight 888
[    14.313] (==) NOUVEAU(0): Default visual is TrueColor
[    14.313] (==) NOUVEAU(0): Using HW cursor
[    14.313] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[    14.313] (==) NOUVEAU(0): Page flipping enabled
[    14.313] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[    14.379] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[    14.400] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    14.402] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[    14.437] (II) NOUVEAU(0): EDID for output LVDS-1
[    14.437] (II) NOUVEAU(0): Manufacturer: SEC  Model: 3245  Serial#: 0
[    14.437] (II) NOUVEAU(0): Year: 2008  Week: 0
[    14.437] (II) NOUVEAU(0): EDID Version: 1.0
[    14.437] (II) NOUVEAU(0): Digital Display Input
[    14.437] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    14.437] (II) NOUVEAU(0): Gamma: 2.20
[    14.437] (II) NOUVEAU(0): No DPMS capabilities specified
[    14.437] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    14.437] (II) NOUVEAU(0): First detailed timing is preferred mode
[    14.437] (II) NOUVEAU(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[    14.437] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[    14.437] (II) NOUVEAU(0): Manufacturer's mask: 0
[    14.437] (II) NOUVEAU(0): Supported detailed timing:
[    14.437] (II) NOUVEAU(0): clock: 72.3 MHz   Image Size:  344 x 194 mm
[    14.437] (II) NOUVEAU(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    14.437] (II) NOUVEAU(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    14.437] (II) NOUVEAU(0): EDID (in hex):
[    14.437] (II) NOUVEAU(0): 00ffffffffffff004ca3453200000000
[    14.437] (II) NOUVEAU(0): 00120100802213780a87f594574f8c27
[    14.437] (II) NOUVEAU(0): 27505400000001010101010101010101
[    14.437] (II) NOUVEAU(0): 010101010101411c56a0500016303020
[    14.437] (II) NOUVEAU(0): 250058c2100000190000000f00000000
[    14.437] (II) NOUVEAU(0): 00000000002387026401000000fe0053
[    14.437] (II) NOUVEAU(0): 414d53554e470a2020202020000000fe
[    14.437] (II) NOUVEAU(0): 004c544e31353641543032303030007c
[    14.437] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[    14.437] (II) NOUVEAU(0): Modeline "1366x768"x60.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    14.437] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz e)
[    14.437] (II) NOUVEAU(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz e)
[    14.437] (II) NOUVEAU(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz e)
[    14.437] (II) NOUVEAU(0): Modeline "720x400"x59.6   22.25  720 744 808 896  400 403 413 417 -hsync +vsync (24.8 kHz e)
[    14.437] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz e)
[    14.437] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.50  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz e)
[    14.458] (II) NOUVEAU(0): EDID for output VGA-1
[    14.460] (II) NOUVEAU(0): EDID for output HDMI-1
[    14.460] (II) NOUVEAU(0): Output LVDS-1 connected
[    14.460] (II) NOUVEAU(0): Output VGA-1 disconnected
[    14.460] (II) NOUVEAU(0): Output HDMI-1 disconnected
[    14.460] (II) NOUVEAU(0): Using exact sizes for initial modes
[    14.460] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1366x768
[    14.460] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    14.460] (--) NOUVEAU(0): Virtual size is 1366x768 (pitch 0)
[    14.460] (**) NOUVEAU(0):  Driver mode "1366x768": 72.3 MHz (scaled from 0.0 MHz), 47.4 kHz, 60.0 Hz
[    14.460] (II) NOUVEAU(0): Modeline "1366x768"x60.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    14.460] (**) NOUVEAU(0):  Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[    14.460] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz e)
[    14.460] (**) NOUVEAU(0):  Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[    14.460] (II) NOUVEAU(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz e)
[    14.460] (**) NOUVEAU(0):  Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[    14.460] (II) NOUVEAU(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz e)
[    14.460] (**) NOUVEAU(0):  Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[    14.460] (II) NOUVEAU(0): Modeline "720x400"x59.6   22.25  720 744 808 896  400 403 413 417 -hsync +vsync (24.8 kHz e)
[    14.460] (**) NOUVEAU(0):  Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[    14.460] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz e)
[    14.460] (**) NOUVEAU(0):  Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[    14.460] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.50  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz e)
[    14.460] (==) NOUVEAU(0): DPI set to (96, 96)
[    14.460] (II) Loading sub module "fb"
[    14.460] (II) LoadModule: "fb"
[    14.460] (II) Loading /usr/lib/xorg/modules/libfb.so
[    14.460] (II) Module fb: vendor="X.Org Foundation"
[    14.460] compiled for 1.15.1, module version = 1.0.0
[    14.460] ABI class: X.Org ANSI C Emulation, version 0.4
[    14.460] (II) Loading sub module "exa"
[    14.460] (II) LoadModule: "exa"
[    14.461] (II) Loading /usr/lib/xorg/modules/libexa.so
[    14.470] (II) Module exa: vendor="X.Org Foundation"
[    14.470] compiled for 1.15.1, module version = 2.6.0
[    14.470] ABI class: X.Org Video Driver, version 15.0
[    14.470] (II) Loading sub module "shadowfb"
[    14.470] (II) LoadModule: "shadowfb"
[    14.471] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    14.475] (II) Module shadowfb: vendor="X.Org Foundation"
[    14.475] compiled for 1.15.1, module version = 1.0.0
[    14.475] ABI class: X.Org ANSI C Emulation, version 0.4
[    14.475] (II) UnloadModule: "modesetting"
[    14.475] (II) Unloading modesetting
[    14.475] (II) UnloadModule: "fbdev"
[    14.475] (II) Unloading fbdev
[    14.475] (II) UnloadSubModule: "fbdevhw"
[    14.475] (II) Unloading fbdevhw
[    14.475] (II) UnloadModule: "vesa"
[    14.475] (II) Unloading vesa
[    14.475] (--) Depth 24 pixmap format is 32 bpp
[    14.477] (II) NOUVEAU(0): Opened GPU channel 0
[    14.487] (II) NOUVEAU(0): [DRI2] Setup complete
[    14.487] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    14.487] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    14.489] (II) EXA(0): Driver allocated offscreen pixmaps
[    14.489] (II) EXA(0): Driver registered support for the following operations:
[    14.489] (II)         Solid
[    14.489] (II)         Copy
[    14.489] (II)         Composite (RENDER acceleration)
[    14.489] (II)         UploadToScreen
[    14.489] (II)         DownloadFromScreen
[    14.489] (==) NOUVEAU(0): Backing store enabled
[    14.489] (==) NOUVEAU(0): Silken mouse enabled
[    14.489] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    14.489] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    14.489] (==) NOUVEAU(0): DPMS enabled
[    14.489] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    14.490] (--) RandR disabled
[    14.494] (II) SELinux: Disabled on system
[    14.984] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    14.984] (II) AIGLX: enabled GLX_ARB_create_context
[    14.984] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    14.984] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    14.984] (II) AIGLX: enabled GLX_INTEL_swap_event
[    14.984] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    14.984] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    14.984] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    14.984] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    14.985] (II) AIGLX: Loaded and initialized nouveau
[    14.985] (II) GLX: Initialized DRI2 GL provider for screen 0
[    14.987] (II) NOUVEAU(0): NVEnterVT is called.
[    15.017] (II) NOUVEAU(0): Setting screen physical size to 361 x 203
[    15.017] resize called 1366 768
[    15.023] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    15.026] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    15.026] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    15.026] (II) LoadModule: "evdev"
[    15.026] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    15.034] (II) Module evdev: vendor="X.Org Foundation"
[    15.034] compiled for 1.15.0, module version = 2.8.2
[    15.034] Module class: X.Org XInput Driver
[    15.034] ABI class: X.Org XInput driver, version 20.0
[    15.034] (II) Using input driver 'evdev' for 'Power Button'
[    15.034] (**) Power Button: always reports core events
[    15.034] (**) evdev: Power Button: Device: "/dev/input/event3"
[    15.034] (--) evdev: Power Button: Vendor 0 Product 0x1
[    15.034] (--) evdev: Power Button: Found keys
[    15.034] (II) evdev: Power Button: Configuring as keyboard
[    15.034] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    15.034] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    15.034] (**) Option "xkb_rules" "evdev"
[    15.034] (**) Option "xkb_model" "pc105"
[    15.034] (**) Option "xkb_layout" "tr"
[    15.036] (II) XKB: reuse xkmfile /var/lib/xkb/server-609880D4F1521A95A29BCD7AB1227A69EC9A1B72.xkm
[    15.037] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    15.037] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    15.037] (II) Using input driver 'evdev' for 'Video Bus'
[    15.037] (**) Video Bus: always reports core events
[    15.037] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    15.037] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    15.037] (--) evdev: Video Bus: Found keys
[    15.037] (II) evdev: Video Bus: Configuring as keyboard
[    15.037] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/LNXVIDEO:00/input/input7/event6"
[    15.037] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    15.037] (**) Option "xkb_rules" "evdev"
[    15.037] (**) Option "xkb_model" "pc105"
[    15.037] (**) Option "xkb_layout" "tr"
[    15.037] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    15.037] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    15.037] (II) Using input driver 'evdev' for 'Power Button'
[    15.037] (**) Power Button: always reports core events
[    15.037] (**) evdev: Power Button: Device: "/dev/input/event1"
[    15.037] (--) evdev: Power Button: Vendor 0 Product 0x1
[    15.037] (--) evdev: Power Button: Found keys
[    15.037] (II) evdev: Power Button: Configuring as keyboard
[    15.037] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[    15.037] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    15.037] (**) Option "xkb_rules" "evdev"
[    15.037] (**) Option "xkb_model" "pc105"
[    15.037] (**) Option "xkb_layout" "tr"
[    15.038] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    15.038] (II) No input driver specified, ignoring this device.
[    15.038] (II) This device may have been added with another device file.
[    15.038] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    15.038] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    15.038] (II) Using input driver 'evdev' for 'Sleep Button'
[    15.038] (**) Sleep Button: always reports core events
[    15.038] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    15.038] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    15.038] (--) evdev: Sleep Button: Found keys
[    15.038] (II) evdev: Sleep Button: Configuring as keyboard
[    15.038] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[    15.038] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    15.038] (**) Option "xkb_rules" "evdev"
[    15.038] (**) Option "xkb_model" "pc105"
[    15.038] (**) Option "xkb_layout" "tr"
[    15.038] (II) config/udev: Adding drm device (/dev/dri/card0)
[    15.038] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    15.039] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[    15.039] (II) No input driver specified, ignoring this device.
[    15.039] (II) This device may have been added with another device file.
[    15.039] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event11)
[    15.039] (II) No input driver specified, ignoring this device.
[    15.039] (II) This device may have been added with another device file.
[    15.039] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event10)
[    15.039] (II) No input driver specified, ignoring this device.
[    15.039] (II) This device may have been added with another device file.
[    15.039] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event9)
[    15.040] (II) No input driver specified, ignoring this device.
[    15.040] (II) This device may have been added with another device file.
[    15.040] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event8)
[    15.040] (II) No input driver specified, ignoring this device.
[    15.040] (II) This device may have been added with another device file.
[    15.040] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event7)
[    15.040] (II) No input driver specified, ignoring this device.
[    15.040] (II) This device may have been added with another device file.
[    15.040] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event13)
[    15.040] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    15.040] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    15.040] (**) Logitech USB Receiver: always reports core events
[    15.040] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event13"
[    15.040] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    15.040] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[    15.040] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    15.040] (--) evdev: Logitech USB Receiver: Found relative axes
[    15.040] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    15.040] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    15.040] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    15.040] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    15.040] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    15.040] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input14/event13"
[    15.041] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[    15.041] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    15.041] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    15.041] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    15.041] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    15.041] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    15.041] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[    15.041] (II) No input driver specified, ignoring this device.
[    15.041] (II) This device may have been added with another device file.
[    15.041] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event14)
[    15.041] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    15.041] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    15.041] (**) Logitech USB Receiver: always reports core events
[    15.041] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event14"
[    15.041] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    15.041] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[    15.041] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    15.041] (--) evdev: Logitech USB Receiver: Found relative axes
[    15.041] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[    15.041] (--) evdev: Logitech USB Receiver: Found absolute axes
[    15.041] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[    15.041] (--) evdev: Logitech USB Receiver: Found keys
[    15.041] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    15.041] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    15.041] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    15.041] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    15.041] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    15.041] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input15/event14"
[    15.042] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[    15.042] (**) Option "xkb_rules" "evdev"
[    15.042] (**) Option "xkb_model" "pc105"
[    15.042] (**) Option "xkb_layout" "tr"
[    15.042] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    15.042] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    15.042] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    15.042] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    15.042] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    15.042] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    15.042] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    15.042] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    15.042] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    15.042] (**) AT Translated Set 2 keyboard: always reports core events
[    15.042] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    15.042] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    15.042] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    15.042] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    15.042] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    15.042] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    15.042] (**) Option "xkb_rules" "evdev"
[    15.042] (**) Option "xkb_model" "pc105"
[    15.042] (**) Option "xkb_layout" "tr"
[    15.043] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[    15.043] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    15.043] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    15.043] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    15.043] (II) LoadModule: "synaptics"
[    15.043] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    15.043] (II) Module synaptics: vendor="X.Org Foundation"
[    15.043] compiled for 1.15.0, module version = 1.7.4
[    15.043] Module class: X.Org XInput Driver
[    15.043] ABI class: X.Org XInput driver, version 20.0
[    15.043] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    15.043] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    15.043] (**) Option "Device" "/dev/input/event5"
[    15.060] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    15.060] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672 (res 76)
[    15.060] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4910 (res 120)
[    15.060] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    15.060] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    15.060] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    15.060] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    15.060] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    15.060] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    15.072] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event5"
[    15.072] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    15.072] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    15.072] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    15.072] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[    15.072] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    15.072] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    15.072] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    15.072] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    15.072] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    15.072] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    15.072] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    16.958] (II) NOUVEAU(0): EDID vendor "SEC", prod id 12869
[    16.958] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x0 mode
[    16.958] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1107 mode
[    16.958] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1100 mode
[    16.958] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    16.959] (II) NOUVEAU(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    17.514] resize called 1366 768
[    17.842] (II) NOUVEAU(0): EDID vendor "SEC", prod id 12869
[    17.842] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x0 mode
[    17.842] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1107 mode
[    17.842] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1100 mode
[    17.842] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    17.842] (II) NOUVEAU(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[   307.479] (II) NOUVEAU(0): EDID vendor "SEC", prod id 12869
[   307.480] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x0 mode
[   307.480] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1107 mode
[   307.480] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1100 mode
[   307.480] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   307.480] (II) NOUVEAU(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[   307.808] resize called 1366 768
[   307.956] (II) NOUVEAU(0): EDID vendor "SEC", prod id 12869
[   307.956] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x0 mode
[   307.956] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1107 mode
[   307.956] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1100 mode
[   307.957] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   307.957] (II) NOUVEAU(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[   308.154] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[   308.445] (II) NOUVEAU(0): EDID vendor "SEC", prod id 12869
[   308.445] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x0 mode
[   308.445] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1107 mode
[   308.445] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1100 mode
[   308.445] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   308.445] (II) NOUVEAU(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[   309.019] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[   309.036] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[   309.130] (II) NOUVEAU(0): EDID vendor "SEC", prod id 12869
[   309.130] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x0 mode
[   309.130] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1107 mode
[   309.130] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1100 mode
[   309.130] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   309.130] (II) NOUVEAU(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[   312.156] (II) NOUVEAU(0): EDID vendor "SEC", prod id 12869
[   312.157] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x0 mode
[   312.157] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1107 mode
[   312.157] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1100 mode
[   312.157] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   312.157] (II) NOUVEAU(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[   313.360] (II) XKB: reuse xkmfile /var/lib/xkb/server-CC1408042868DFC3E36C01F9FEFB9FA17C3810C1.xkm
[   324.247] (II) NOUVEAU(0): EDID vendor "SEC", prod id 12869
[   324.247] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x0 mode
[   324.247] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1107 mode
[   324.247] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1100 mode
[   324.247] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   324.247] (II) NOUVEAU(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[  7106.032] (WW) NOUVEAU(0): nouveau_dri2_flip_event_handler: Pageflip has impossible msc 407969 < target_msc 407970
[  7615.749] (WW) NOUVEAU(0): nouveau_dri2_flip_event_handler: Pageflip has impossible msc 438551 < target_msc 438552
[  7780.422] (WW) NOUVEAU(0): nouveau_dri2_flip_event_handler: Pageflip has impossible msc 448431 < target_msc 448432
[  7827.373] (WW) NOUVEAU(0): nouveau_dri2_flip_event_handler: Pageflip has impossible msc 451248 < target_msc 451249
[  8040.397] (WW) NOUVEAU(0): nouveau_dri2_flip_event_handler: Pageflip has impossible msc 464029 < target_msc 464030
[  8044.564] (WW) NOUVEAU(0): nouveau_dri2_flip_event_handler: Pageflip has impossible msc 464279 < target_msc 464280
[  9949.518] (II) NOUVEAU(0): EDID vendor "SEC", prod id 12869
[  9949.518] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x0 mode
[  9949.518] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1107 mode
[  9949.519] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1100 mode
[  9949.519] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[  9949.519] (II) NOUVEAU(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)


Kern için;

Kod Seç Genişlet

0] RAM size: 512 MiB
Aug  5 22:01:04 UbuntuCan kernel: [   10.667822] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 960 tags
Aug  5 22:01:04 UbuntuCan kernel: [   10.673938] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 850000uv
Aug  5 22:01:04 UbuntuCan kernel: [   10.696841] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
Aug  5 22:01:04 UbuntuCan kernel: [   10.696849] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
Aug  5 22:01:04 UbuntuCan kernel: [   10.696856] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
Aug  5 22:01:04 UbuntuCan kernel: [   10.696896] nouveau  [     CLK][0000:01:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
Aug  5 22:01:04 UbuntuCan kernel: [   10.696900] nouveau  [     CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 405 MHz
Aug  5 22:01:04 UbuntuCan kernel: [   10.696904] nouveau  [     CLK][0000:01:00.0] 0f: core 625 MHz shader 1530 MHz memory 790 MHz
Aug  5 22:01:04 UbuntuCan kernel: [   10.696929] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
Aug  5 22:01:04 UbuntuCan kernel: [   10.697138] [TTM] Zone  kernel: Available graphics memory: 1950090 kiB
Aug  5 22:01:04 UbuntuCan kernel: [   10.697143] [TTM] Initializing pool allocator
Aug  5 22:01:04 UbuntuCan kernel: [   10.697155] [TTM] Initializing DMA pool allocator
Aug  5 22:01:04 UbuntuCan kernel: [   10.697172] nouveau  [     DRM] VRAM: 512 MiB
Aug  5 22:01:04 UbuntuCan kernel: [   10.697175] nouveau  [     DRM] GART: 1048576 MiB
Aug  5 22:01:04 UbuntuCan kernel: [   10.697182] nouveau  [     DRM] TMDS table version 2.0
Aug  5 22:01:04 UbuntuCan kernel: [   10.697185] nouveau  [     DRM] DCB version 4.0
Aug  5 22:01:04 UbuntuCan kernel: [   10.697190] nouveau  [     DRM] DCB outp 00: 01000323 00010034
Aug  5 22:01:04 UbuntuCan kernel: [   10.697194] nouveau  [     DRM] DCB outp 01: 02011300 00000000
Aug  5 22:01:04 UbuntuCan kernel: [   10.697197] nouveau  [     DRM] DCB outp 02: 08022382 00020010
Aug  5 22:01:04 UbuntuCan kernel: [   10.697200] nouveau  [     DRM] DCB conn 00: 00000040
Aug  5 22:01:04 UbuntuCan kernel: [   10.697204] nouveau  [     DRM] DCB conn 01: 00000100
Aug  5 22:01:04 UbuntuCan kernel: [   10.697207] nouveau  [     DRM] DCB conn 02: 00001261
Aug  5 22:01:04 UbuntuCan kernel: [   10.733922] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Aug  5 22:01:04 UbuntuCan kernel: [   10.733925] [drm] No driver support for vblank timestamp query.
Aug  5 22:01:04 UbuntuCan kernel: [   10.733929] nouveau  [     DRM] ACPI backlight interface available, not registering our own
Aug  5 22:01:04 UbuntuCan kernel: [   10.774826] nouveau  [     DRM] MM: using COPY for buffer copies
Aug  5 22:01:04 UbuntuCan kernel: [   10.834682] nouveau  [     DRM] allocated 1366x768 fb: 0x70000, bo ffff8800ce844800
Aug  5 22:01:04 UbuntuCan kernel: [   10.834793] fbcon: nouveaufb (fb0) is primary device
Aug  5 22:01:04 UbuntuCan kernel: [   11.064364] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Aug  5 22:01:04 UbuntuCan kernel: [   11.095232] Bluetooth: Core ver 2.17
Aug  5 22:01:04 UbuntuCan kernel: [   11.095256] NET: Registered protocol family 31
Aug  5 22:01:04 UbuntuCan kernel: [   11.095257] Bluetooth: HCI device and connection manager initialized
Aug  5 22:01:04 UbuntuCan kernel: [   11.095519] Bluetooth: HCI socket layer initialized
Aug  5 22:01:04 UbuntuCan kernel: [   11.095521] Bluetooth: L2CAP socket layer initialized
Aug  5 22:01:04 UbuntuCan kernel: [   11.095527] Bluetooth: SCO socket layer initialized
Aug  5 22:01:04 UbuntuCan kernel: [   11.150846] usbcore: registered new interface driver btusb
Aug  5 22:01:04 UbuntuCan kernel: [   11.169178] hidraw: raw HID events driver (C) Jiri Kosina
Aug  5 22:01:04 UbuntuCan kernel: [   11.174390] usbcore: registered new interface driver usbhid
Aug  5 22:01:04 UbuntuCan kernel: [   11.174391] usbhid: USB HID core driver
Aug  5 22:01:04 UbuntuCan kernel: [   11.176859] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input14
Aug  5 22:01:04 UbuntuCan kernel: [   11.177030] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input0
Aug  5 22:01:04 UbuntuCan kernel: [   11.178115] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input15
Aug  5 22:01:04 UbuntuCan kernel: [   11.180558] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input1
Aug  5 22:01:04 UbuntuCan kernel: [   12.231686] Console: switching to colour frame buffer device 170x48
Aug  5 22:01:04 UbuntuCan kernel: [   12.232455] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
Aug  5 22:01:04 UbuntuCan kernel: [   12.232458] nouveau 0000:01:00.0: registered panic notifier
Aug  5 22:01:04 UbuntuCan kernel: [   12.232463] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
Aug  5 22:01:04 UbuntuCan kernel: [   12.418370] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Aug  5 22:01:04 UbuntuCan kernel: [   12.418375] Bluetooth: BNEP filters: protocol multicast
Aug  5 22:01:04 UbuntuCan kernel: [   12.418390] Bluetooth: BNEP socket layer initialized
Aug  5 22:01:04 UbuntuCan kernel: [   12.428279] Bluetooth: RFCOMM TTY layer initialized
Aug  5 22:01:04 UbuntuCan kernel: [   12.428295] Bluetooth: RFCOMM socket layer initialized
Aug  5 22:01:04 UbuntuCan kernel: [   12.428302] Bluetooth: RFCOMM ver 1.11
Aug  5 22:01:04 UbuntuCan kernel: [   12.460344] type=1400 audit(1407265264.737:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=809 comm="apparmor_parser"
Aug  5 22:01:04 UbuntuCan kernel: [   12.460354] type=1400 audit(1407265264.737:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=809 comm="apparmor_parser"
Aug  5 22:01:04 UbuntuCan kernel: [   12.460972] type=1400 audit(1407265264.737:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=809 comm="apparmor_parser"
Aug  5 22:01:05 UbuntuCan kernel: [   13.201507] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Aug  5 22:01:05 UbuntuCan kernel: [   13.207742] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Aug  5 22:01:05 UbuntuCan kernel: [   13.220967] sky2 0000:06:00.0 eth0: enabling interface
Aug  5 22:01:05 UbuntuCan kernel: [   13.221572] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Aug  5 22:01:05 UbuntuCan kernel: [   13.224240] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Aug  5 22:01:05 UbuntuCan kernel: [   13.253513] type=1400 audit(1407265265.529:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=894 comm="apparmor_parser"
Aug  5 22:01:06 UbuntuCan kernel: [   14.175679] Non-volatile memory driver v1.3
Aug  5 22:01:07 UbuntuCan kernel: [   14.963952] wlan0: authenticate with a4:99:47:5e:d3:84
Aug  5 22:01:07 UbuntuCan kernel: [   14.985945] wlan0: send auth to a4:99:47:5e:d3:84 (try 1/3)
Aug  5 22:01:07 UbuntuCan kernel: [   14.987944] wlan0: authenticated
Aug  5 22:01:07 UbuntuCan kernel: [   14.991250] wlan0: associate with a4:99:47:5e:d3:84 (try 1/3)
Aug  5 22:01:07 UbuntuCan kernel: [   14.995624] wlan0: RX AssocResp from a4:99:47:5e:d3:84 (capab=0x431 status=0 aid=4)
Aug  5 22:01:07 UbuntuCan kernel: [   14.995686] wlan0: associated
Aug  5 22:01:07 UbuntuCan kernel: [   14.995703] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Aug  5 22:01:07 UbuntuCan kernel: [   14.995854] cfg80211: Calling CRDA for country: TR
Aug  5 22:01:07 UbuntuCan kernel: [   14.998458] ath: EEPROM regdomain: 0x8318
Aug  5 22:01:07 UbuntuCan kernel: [   14.998463] ath: EEPROM indicates we should expect a country code
Aug  5 22:01:07 UbuntuCan kernel: [   14.998464] ath: doing EEPROM country->regdmn map search
Aug  5 22:01:07 UbuntuCan kernel: [   14.998466] ath: country maps to regdmn code: 0x36
Aug  5 22:01:07 UbuntuCan kernel: [   14.998467] ath: Country alpha2 being used: TR
Aug  5 22:01:07 UbuntuCan kernel: [   14.998468] ath: Regpair used: 0x36
Aug  5 22:01:07 UbuntuCan kernel: [   14.998469] ath: regdomain 0x8318 dynamically updated by country IE
Aug  5 22:01:07 UbuntuCan kernel: [   14.998498] cfg80211: Regulatory domain changed to country: TR
Aug  5 22:01:07 UbuntuCan kernel: [   14.998499] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug  5 22:01:07 UbuntuCan kernel: [   14.998500] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Aug  5 22:01:07 UbuntuCan kernel: [   14.998502] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Aug  5 22:01:07 UbuntuCan kernel: [   14.998503] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Aug  5 22:01:07 UbuntuCan kernel: [   14.998504] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Aug  5 22:01:07 UbuntuCan kernel: [   15.239764] wlan0: deauthenticating from a4:99:47:5e:d3:84 by local choice (reason=2)
Aug  5 22:01:07 UbuntuCan kernel: [   15.248495] cfg80211: Calling CRDA to update world regulatory domain
Aug  5 22:01:07 UbuntuCan kernel: [   15.249032] wlan0: authenticate with a4:99:47:5e:d3:84
Aug  5 22:01:07 UbuntuCan kernel: [   15.265231] wlan0: send auth to a4:99:47:5e:d3:84 (try 1/3)
Aug  5 22:01:07 UbuntuCan kernel: [   15.265472] cfg80211: World regulatory domain updated:
Aug  5 22:01:07 UbuntuCan kernel: [   15.265476] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug  5 22:01:07 UbuntuCan kernel: [   15.265478] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug  5 22:01:07 UbuntuCan kernel: [   15.265480] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug  5 22:01:07 UbuntuCan kernel: [   15.265482] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Aug  5 22:01:07 UbuntuCan kernel: [   15.265483] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug  5 22:01:07 UbuntuCan kernel: [   15.265485] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug  5 22:01:07 UbuntuCan kernel: [   15.267218] wlan0: authenticated
Aug  5 22:01:07 UbuntuCan kernel: [   15.271270] wlan0: associate with a4:99:47:5e:d3:84 (try 1/3)
Aug  5 22:01:07 UbuntuCan kernel: [   15.275468] wlan0: RX AssocResp from a4:99:47:5e:d3:84 (capab=0x431 status=0 aid=4)
Aug  5 22:01:07 UbuntuCan kernel: [   15.275518] wlan0: associated
Aug  5 22:01:07 UbuntuCan kernel: [   15.275557] cfg80211: Calling CRDA for country: TR
Aug  5 22:01:07 UbuntuCan kernel: [   15.278588] ath: EEPROM regdomain: 0x8318
Aug  5 22:01:07 UbuntuCan kernel: [   15.278593] ath: EEPROM indicates we should expect a country code
Aug  5 22:01:07 UbuntuCan kernel: [   15.278595] ath: doing EEPROM country->regdmn map search
Aug  5 22:01:07 UbuntuCan kernel: [   15.278597] ath: country maps to regdmn code: 0x36
Aug  5 22:01:07 UbuntuCan kernel: [   15.278598] ath: Country alpha2 being used: TR
Aug  5 22:01:07 UbuntuCan kernel: [   15.278600] ath: Regpair used: 0x36
Aug  5 22:01:07 UbuntuCan kernel: [   15.278601] ath: regdomain 0x8318 dynamically updated by country IE
Aug  5 22:01:07 UbuntuCan kernel: [   15.278634] cfg80211: Regulatory domain changed to country: TR
Aug  5 22:01:07 UbuntuCan kernel: [   15.278635] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug  5 22:01:07 UbuntuCan kernel: [   15.278637] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Aug  5 22:01:07 UbuntuCan kernel: [   15.278639] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Aug  5 22:01:07 UbuntuCan kernel: [   15.278641] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Aug  5 22:01:07 UbuntuCan kernel: [   15.278643] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Aug  5 22:01:34 UbuntuCan kernel: [   42.577978] audit_printk_skb: 150 callbacks suppressed
Aug  5 22:01:34 UbuntuCan kernel: [   42.577982] type=1400 audit(1407265294.841:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1731 comm="apparmor_parser"
Aug  5 22:01:34 UbuntuCan kernel: [   42.577990] type=1400 audit(1407265294.841:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1731 comm="apparmor_parser"
Aug  5 22:01:34 UbuntuCan kernel: [   42.578434] type=1400 audit(1407265294.841:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1731 comm="apparmor_parser"
Aug  5 23:57:23 UbuntuCan kernel: [ 6993.694319] cfg80211: Calling CRDA to update world regulatory domain
Aug  5 23:57:23 UbuntuCan kernel: [ 6993.702468] cfg80211: World regulatory domain updated:
Aug  5 23:57:23 UbuntuCan kernel: [ 6993.702475] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug  5 23:57:23 UbuntuCan kernel: [ 6993.702479] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug  5 23:57:23 UbuntuCan kernel: [ 6993.702482] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug  5 23:57:23 UbuntuCan kernel: [ 6993.702485] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Aug  5 23:57:23 UbuntuCan kernel: [ 6993.702488] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug  5 23:57:23 UbuntuCan kernel: [ 6993.702491] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug  5 23:57:24 UbuntuCan kernel: [ 6994.628490] wlan0: authenticate with a4:99:47:5e:d3:84
Aug  5 23:57:24 UbuntuCan kernel: [ 6994.650158] wlan0: send auth to a4:99:47:5e:d3:84 (try 1/3)
Aug  5 23:57:24 UbuntuCan kernel: [ 6994.681207] wlan0: authenticated
Aug  5 23:57:24 UbuntuCan kernel: [ 6994.682996] wlan0: associate with a4:99:47:5e:d3:84 (try 1/3)
Aug  5 23:57:24 UbuntuCan kernel: [ 6994.842413] wlan0: associate with a4:99:47:5e:d3:84 (try 2/3)
Aug  5 23:57:25 UbuntuCan kernel: [ 6995.003910] wlan0: associate with a4:99:47:5e:d3:84 (try 3/3)
Aug  5 23:57:25 UbuntuCan kernel: [ 6995.150484] wlan0: association with a4:99:47:5e:d3:84 timed out
Aug  5 23:57:26 UbuntuCan kernel: [ 6996.504463] wlan0: authenticate with a4:99:47:5e:d3:84
Aug  5 23:57:26 UbuntuCan kernel: [ 6996.526366] wlan0: direct probe to a4:99:47:5e:d3:84 (try 1/3)
Aug  5 23:57:26 UbuntuCan kernel: [ 6996.727423] wlan0: direct probe to a4:99:47:5e:d3:84 (try 2/3)
Aug  5 23:57:27 UbuntuCan kernel: [ 6996.931439] wlan0: direct probe to a4:99:47:5e:d3:84 (try 3/3)
Aug  5 23:57:27 UbuntuCan kernel: [ 6997.135468] wlan0: authentication with a4:99:47:5e:d3:84 timed out
Aug  5 23:57:29 UbuntuCan kernel: [ 6998.996702] wlan0: authenticate with a4:99:47:5e:d3:84
Aug  5 23:57:29 UbuntuCan kernel: [ 6999.019241] wlan0: direct probe to a4:99:47:5e:d3:84 (try 1/3)
Aug  5 23:57:29 UbuntuCan kernel: [ 6999.219960] wlan0: send auth to a4:99:47:5e:d3:84 (try 2/3)
Aug  5 23:57:29 UbuntuCan kernel: [ 6999.252313] wlan0: authenticated
Aug  5 23:57:29 UbuntuCan kernel: [ 6999.255969] wlan0: associate with a4:99:47:5e:d3:84 (try 1/3)
Aug  5 23:57:29 UbuntuCan kernel: [ 6999.271876] wlan0: RX AssocResp from a4:99:47:5e:d3:84 (capab=0x431 status=0 aid=3)
Aug  5 23:57:29 UbuntuCan kernel: [ 6999.271985] wlan0: associated
Aug  5 23:57:29 UbuntuCan kernel: [ 6999.272103] cfg80211: Calling CRDA for country: TR
Aug  5 23:57:29 UbuntuCan kernel: [ 6999.279398] ath: EEPROM regdomain: 0x8318
Aug  5 23:57:29 UbuntuCan kernel: [ 6999.279407] ath: EEPROM indicates we should expect a country code
Aug  5 23:57:29 UbuntuCan kernel: [ 6999.279412] ath: doing EEPROM country->regdmn map search
Aug  5 23:57:29 UbuntuCan kernel: [ 6999.279416] ath: country maps to regdmn code: 0x36
Aug  5 23:57:29 UbuntuCan kernel: [ 6999.279420] ath: Country alpha2 being used: TR
Aug  5 23:57:29 UbuntuCan kernel: [ 6999.279423] ath: Regpair used: 0x36
Aug  5 23:57:29 UbuntuCan kernel: [ 6999.279427] ath: regdomain 0x8318 dynamically updated by country IE
Aug  5 23:57:29 UbuntuCan kernel: [ 6999.279469] cfg80211: Regulatory domain changed to country: TR
Aug  5 23:57:29 UbuntuCan kernel: [ 6999.279472] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug  5 23:57:29 UbuntuCan kernel: [ 6999.279477] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Aug  5 23:57:29 UbuntuCan kernel: [ 6999.279482] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Aug  5 23:57:29 UbuntuCan kernel: [ 6999.279486] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Aug  5 23:57:29 UbuntuCan kernel: [ 6999.279491] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Aug  5 23:58:21 UbuntuCan kernel: [ 7051.456715] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  5 23:58:23 UbuntuCan kernel: [ 7053.555258] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  5 23:58:27 UbuntuCan kernel: [ 7057.788363] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  5 23:58:28 UbuntuCan kernel: [ 7058.834802] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  5 23:58:30 UbuntuCan kernel: [ 7059.883370] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  5 23:58:30 UbuntuCan kernel: [ 7059.963064] ath: phy0: Failed to stop TX DMA, queues=0x005!
Aug  5 23:58:31 UbuntuCan kernel: [ 7060.964566] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:00:21 UbuntuCan kernel: [ 7171.092617] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:00:22 UbuntuCan kernel: [ 7172.096023] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:02:23 UbuntuCan kernel: [ 7293.159788] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:02:36 UbuntuCan kernel: [ 7306.402909] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:02:39 UbuntuCan kernel: [ 7309.388658] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:02:43 UbuntuCan kernel: [ 7313.060822] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:04:22 UbuntuCan kernel: [ 7412.953556] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:04:24 UbuntuCan kernel: [ 7414.003722] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:04:25 UbuntuCan kernel: [ 7415.065185] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:04:29 UbuntuCan kernel: [ 7419.277170] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:04:31 UbuntuCan kernel: [ 7421.376458] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:04:32 UbuntuCan kernel: [ 7422.441328] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:04:33 UbuntuCan kernel: [ 7423.555949] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:07:36 UbuntuCan kernel: [ 7606.713614] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:07:37 UbuntuCan kernel: [ 7607.827799] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:07:40 UbuntuCan kernel: [ 7610.042274] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:07:41 UbuntuCan kernel: [ 7611.158545] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:08:21 UbuntuCan kernel: [ 7651.193039] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:08:22 UbuntuCan kernel: [ 7652.186724] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:08:24 UbuntuCan kernel: [ 7654.305614] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:08:29 UbuntuCan kernel: [ 7659.548916] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:10:27 UbuntuCan kernel: [ 7777.506061] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:10:34 UbuntuCan kernel: [ 7784.971703] ath: phy0: Failed to stop TX DMA, queues=0x004!
Aug  6 00:14:15 UbuntuCan kernel: [ 8005.327947] cfg80211: Calling CRDA to update world regulatory domain
Aug  6 00:14:15 UbuntuCan kernel: [ 8005.336328] cfg80211: World regulatory domain updated:
Aug  6 00:14:15 UbuntuCan kernel: [ 8005.336353] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug  6 00:14:15 UbuntuCan kernel: [ 8005.336358] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug  6 00:14:15 UbuntuCan kernel: [ 8005.336366] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug  6 00:14:15 UbuntuCan kernel: [ 8005.336376] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Aug  6 00:14:15 UbuntuCan kernel: [ 8005.336380] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug  6 00:14:15 UbuntuCan kernel: [ 8005.336383] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug  6 00:14:16 UbuntuCan kernel: [ 8006.261335] wlan0: authenticate with a4:99:47:5e:d3:84
Aug  6 00:14:16 UbuntuCan kernel: [ 8006.284582] wlan0: send auth to a4:99:47:5e:d3:84 (try 1/3)
Aug  6 00:14:16 UbuntuCan kernel: [ 8006.400735] wlan0: send auth to a4:99:47:5e:d3:84 (try 2/3)
Aug  6 00:14:16 UbuntuCan kernel: [ 8006.536709] wlan0: send auth to a4:99:47:5e:d3:84 (try 3/3)
Aug  6 00:14:16 UbuntuCan kernel: [ 8006.676689] wlan0: authentication with a4:99:47:5e:d3:84 timed out
Aug  6 00:14:17 UbuntuCan kernel: [ 8008.038095] wlan0: authenticate with a4:99:47:5e:d3:84
Aug  6 00:14:17 UbuntuCan kernel: [ 8008.060187] wlan0: direct probe to a4:99:47:5e:d3:84 (try 1/3)
Aug  6 00:14:18 UbuntuCan kernel: [ 8008.261120] wlan0: direct probe to a4:99:47:5e:d3:84 (try 2/3)
Aug  6 00:14:18 UbuntuCan kernel: [ 8008.465201] wlan0: send auth to a4:99:47:5e:d3:84 (try 3/3)
Aug  6 00:14:19 UbuntuCan kernel: [ 8009.107247] wlan0: authentication with a4:99:47:5e:d3:84 timed out
Aug  6 00:14:20 UbuntuCan kernel: [ 8010.966821] wlan0: authenticate with a4:99:47:5e:d3:84
Aug  6 00:14:20 UbuntuCan kernel: [ 8010.988617] wlan0: direct probe to a4:99:47:5e:d3:84 (try 1/3)
Aug  6 00:14:21 UbuntuCan kernel: [ 8011.189781] wlan0: direct probe to a4:99:47:5e:d3:84 (try 2/3)
Aug  6 00:14:21 UbuntuCan kernel: [ 8011.393826] wlan0: send auth to a4:99:47:5e:d3:84 (try 3/3)
Aug  6 00:14:21 UbuntuCan kernel: [ 8011.497822] wlan0: authentication with a4:99:47:5e:d3:84 timed out
Aug  6 00:14:30 UbuntuCan kernel: [ 8020.774281] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Aug  6 00:46:49 UbuntuCan kernel: [ 9959.614336] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.337860] wlan0: authenticate with a4:99:47:5e:d3:84
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.361283] wlan0: send auth to a4:99:47:5e:d3:84 (try 1/3)
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.363300] wlan0: authenticated
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.364493] wlan0: associate with a4:99:47:5e:d3:84 (try 1/3)
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.368837] wlan0: RX AssocResp from a4:99:47:5e:d3:84 (capab=0x431 status=0 aid=3)
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.368897] wlan0: associated
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.368913] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.369273] cfg80211: Calling CRDA for country: TR
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.371993] ath: EEPROM regdomain: 0x8318
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.371996] ath: EEPROM indicates we should expect a country code
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.371998] ath: doing EEPROM country->regdmn map search
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.371999] ath: country maps to regdmn code: 0x36
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.372000] ath: Country alpha2 being used: TR
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.372001] ath: Regpair used: 0x36
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.372003] ath: regdomain 0x8318 dynamically updated by country IE
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.372123] cfg80211: Regulatory domain changed to country: TR
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.372124] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.372125] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.372127] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.372128] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Aug  6 00:46:50 UbuntuCan kernel: [ 9961.372130] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.576849] wlan0: deauthenticating from a4:99:47:5e:d3:84 by local choice (reason=2)
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.587361] cfg80211: Calling CRDA to update world regulatory domain
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.588070] wlan0: authenticate with a4:99:47:5e:d3:84
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.604885] wlan0: send auth to a4:99:47:5e:d3:84 (try 1/3)
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.605155] cfg80211: World regulatory domain updated:
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.605159] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.605161] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.605163] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.605165] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.605167] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.605169] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.607332] wlan0: authenticated
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.609084] wlan0: associate with a4:99:47:5e:d3:84 (try 1/3)
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.613326] wlan0: RX AssocResp from a4:99:47:5e:d3:84 (capab=0x431 status=0 aid=3)
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.613381] wlan0: associated
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.613426] cfg80211: Calling CRDA for country: TR
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.619272] ath: EEPROM regdomain: 0x8318
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.619277] ath: EEPROM indicates we should expect a country code
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.619279] ath: doing EEPROM country->regdmn map search
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.619281] ath: country maps to regdmn code: 0x36
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.619282] ath: Country alpha2 being used: TR
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.619283] ath: Regpair used: 0x36
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.619285] ath: regdomain 0x8318 dynamically updated by country IE
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.619315] cfg80211: Regulatory domain changed to country: TR
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.619317] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.619319] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.619322] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.619324] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Aug  6 00:46:51 UbuntuCan kernel: [ 9961.619326] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)


[bytan]

Sanki her şey olması gerektiği şekilde gidiyormuş gibi buraya da bir şey düşmemiş.

[emrebahis]

Eğer imkan dahilindeyse dizüstünüzü başka bir ekrana bağlayıp deneyebilir misiniz?

Böylece, problemin dahili ekranda mı yoksa donanımda mı olduğunu ayırt edebiliriz diye bir fikir geldi aklıma.

[7hr33l3t73r]

Olustudugunuz xorg.conf dosyasini yedekleyin ve silin.Tekrar baslatin yaptiginiz degisikliklerden mi? gorelim.

[delice_doluca]

Eğer imkan dahilindeyse dizüstünüzü başka bir ekrana bağlayıp deneyebilir misiniz?

Böylece, problemin dahili ekranda mı yoksa donanımda mı olduğunu ayırt edebiliriz diye bir fikir geldi aklıma.

1024x768'lik, 4:3 oranlı bir ofis monitörüne bağladım. O monitörde görüntü tam da olması gerektiği gibi. Aynı resmi her iki ekranda da açtığımda sanki bilgisayarın kendi monitöründe "sharpness" ve "contrast" değerleri, özellikle (basta) kırmızı ve mavi renkler olmak üzere sonuna kadar açılmış gibi görünüyor. Harici monitörde ise resmin renklerinin geçişleri ve keskinlik değerleri tam da olması gerektiği gibi (tabletimden ve telefonumdan da aynı resmi görüntülediğim zaman aynı değerleri alıyorum).

Eğer bilgisayarımın kendi ekranı Windows işletim sistemleri mevcutken de böyle olsaydı o zaman "sorun benim ekranın kalitesinde, yapacak bir şey yok" derdim ama bu Ubuntu'ya özgü bir durum

[emrebahis]

1024x768'lik, 4:3 oranlı bir ofis monitörüne bağladım. O monitörde görüntü tam da olması gerektiği gibi. Aynı resmi her iki ekranda da açtığımda sanki bilgisayarın kendi monitöründe "sharpness" ve "contrast" değerleri, özellikle (basta) kırmızı ve mavi renkler olmak üzere sonuna kadar açılmış gibi görünüyor. Harici monitörde ise resmin renklerinin geçişleri ve keskinlik değerleri tam da olması gerektiği gibi (tabletimden ve telefonumdan da aynı resmi görüntülediğim zaman aynı değerleri alıyorum).
Eğer bilgisayarımın kendi ekranı Windows işletim sistemleri mevcutken de böyle olsaydı o zaman "sorun benim ekranın kalitesinde, yapacak bir şey yok" derdim ama bu Ubuntu'ya özgü bir durum

Olustudugunuz xorg.conf dosyasini yedekleyin ve silin.Tekrar baslatin yaptiginiz degisikliklerden mi? gorelim.

Arkadaşımızın önerisini deneyin.

Gene sonuç alamazsanız Knoppix canlı DVD ile bir deneme yapmanızı önerebilirim.

http://knopper.net/knoppix-mirrors/index-en.html

DVD olanın boyutu biraz büyük ama CD olanı kimi zaman sorun çıkarabiliyor. Ayrıca Unetbootin ile usb belleğe de   kurulabiliyor.

Eğer sorunsuz ve istediğiniz gibi çalışırsa

Belki bir ihtimal log dosyalarında bir şeyler vardır:

Kod Seç Genişlet

cat /var/log/Xorg.0.log
cat /var/log/kern.log

Sistemi açınca log dosyalarını alıp eklerseniz tecrübeli arkadaşlar iki log dosyası arasında karşılaştırma yapabilir sanırım.

[heartsmagic]

Hani sorun sürekli oluyor olsa caba renk profilleri ile mi ilgili, onları düzenleyerek falan düzeltilebilir mi diyeceğim ama sürekli değil, belirli bir süre sonra oluyor denmiş. Yine de belki renk profili olayına bakılabilir.

[delice_doluca]

1024x768'lik, 4:3 oranlı bir ofis monitörüne bağladım. O monitörde görüntü tam da olması gerektiği gibi. Aynı resmi her iki ekranda da açtığımda sanki bilgisayarın kendi monitöründe "sharpness" ve "contrast" değerleri, özellikle (basta) kırmızı ve mavi renkler olmak üzere sonuna kadar açılmış gibi görünüyor. Harici monitörde ise resmin renklerinin geçişleri ve keskinlik değerleri tam da olması gerektiği gibi (tabletimden ve telefonumdan da aynı resmi görüntülediğim zaman aynı değerleri alıyorum).
Eğer bilgisayarımın kendi ekranı Windows işletim sistemleri mevcutken de böyle olsaydı o zaman "sorun benim ekranın kalitesinde, yapacak bir şey yok" derdim ama bu Ubuntu'ya özgü bir durum

Olustudugunuz xorg.conf dosyasini yedekleyin ve silin.Tekrar baslatin yaptiginiz degisikliklerden mi? gorelim.

Arkadaşımızın önerisini deneyin.

Gene sonuç alamazsanız Knoppix canlı DVD ile bir deneme yapmanızı önerebilirim.

http://knopper.net/knoppix-mirrors/index-en.html

DVD olanın boyutu biraz büyük ama CD olanı kimi zaman sorun çıkarabiliyor. Ayrıca Unetbootin ile usb belleğe de   kurulabiliyor.

Eğer sorunsuz ve istediğiniz gibi çalışırsa

Belki bir ihtimal log dosyalarında bir şeyler vardır:

Kod Seç Genişlet

cat /var/log/Xorg.0.log
cat /var/log/kern.log

Sistemi açınca log dosyalarını alıp eklerseniz tecrübeli arkadaşlar iki log dosyası arasında karşılaştırma yapabilir sanırım.

xorg.conf dosyasi bir degisiklik yapmadi. Knoppix ile denedim; hersey olmasi gerektigi gibi. Sorun kesinlikle Ubuntu'da. Bu arada Ubuntu'nun canli CD sini de denedikten sonra emin oldum ki bu sorun hep vardi ancak ben belirli renklerde daha belirgin oldugu icin gec farkettim.

Knoppix uzerindeyken elde ettigim logu yolluyorum, kern komutu ise yaramiyor bu arada. Sadece bir log var;

Kod Seç Genişlet

[    91.775]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[    91.775] X Protocol Version 11, Revision 0
[    91.775] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[    91.775] Current Operating System: Linux Microknoppix 3.15.6-64 #14 SMP PREEMPT Tue Jul 22 02:51:44 CEST 2014 x86_64
[    91.775] Kernel command line: lang=de video=vga16fb:off apm=power-off nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 lang=en apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 BOOT_IMAGE=linux64
[    91.775] Build Date: 17 July 2014  11:01:50PM
[    91.775] xorg-server 2:1.16.0-1 (http://www.debian.org/support)
[    91.775] Current version of pixman: 0.32.6
[    91.775] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    91.775] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    91.775] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug  8 22:02:39 2014
[    91.780] (==) Using config file: "/etc/X11/xorg.conf"
[    91.780] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    91.783] (==) ServerLayout "XFree86 Configured"
[    91.783] (**) |-->Screen "Screen0" (0)
[    91.783] (**) |   |-->Monitor "Monitor0"
[    91.786] (**) |   |-->Device "Card0"
[    91.786] (**) Option "AllowMouseOpenFail" "true"
[    91.786] (**) Option "AIGLX" "true"
[    91.786] (==) Automatically adding devices
[    91.786] (==) Automatically enabling devices
[    91.786] (==) Automatically adding GPU devices
[    92.311] (WW) The directory "/usr/share/fonts/X11/Speedo" does not exist.
[    92.311] Entry deleted from font path.
[    92.311] (WW) The directory "/usr/share/fonts/X11/PEX" does not exist.
[    92.311] Entry deleted from font path.
[    92.311] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    92.311] Entry deleted from font path.
[    92.311] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    92.311] Entry deleted from font path.
[    92.312] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/truetype".
[    92.312] Entry deleted from font path.
[    92.312] (Run 'mkfontdir' on "/usr/share/fonts/truetype").
[    92.312] (WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
[    92.312] Entry deleted from font path.
[    92.312] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    92.312] Entry deleted from font path.
[    92.312] (**) FontPath set to:
/usr/share/fonts/X11/misc:unscaled,
/usr/share/fonts/X11/75dpi:unscaled,
/usr/share/fonts/X11/100dpi:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[    92.312] (**) ModulePath set to "/usr/lib/xorg/modules"
[    92.312] (**) Extension "Composite" is enabled
[    92.312] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    92.312] (II) Loader magic: 0xf777d700
[    92.312] (II) Module ABI versions:
[    92.312] X.Org ANSI C Emulation: 0.4
[    92.312] X.Org Video Driver: 18.0
[    92.312] X.Org XInput driver : 21.0
[    92.312] X.Org Server Extension : 8.0
[    92.312] (II) xfree86: Adding drm device (/dev/dri/card0)
[    92.314] (--) PCI:*(0:1:0:0) 10de:0a75:144d:c06a rev 162, Mem @ 0xf2000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[    92.315] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    92.315] (II) LoadModule: "dbe"
[    92.315] (II) Module "dbe" already built-in
[    92.315] (II) LoadModule: "dri"
[    92.315] (II) Module "dri" already built-in
[    92.315] (II) LoadModule: "glx"
[    92.317] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    92.323] (II) Module glx: vendor="X.Org Foundation"
[    92.323] compiled for 1.16.0, module version = 1.0.0
[    92.323] ABI class: X.Org Server Extension, version 8.0
[    92.323] (**) AIGLX enabled
[    92.323] (II) LoadModule: "record"
[    92.323] (II) Module "record" already built-in
[    92.323] (II) LoadModule: "extmod"
[    92.323] (II) Module "extmod" already built-in
[    92.323] (II) LoadModule: "extmod"
[    92.323] (II) Module "extmod" already built-in
[    92.323] (II) LoadModule: "nouveau"
[    92.323] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    92.857] (II) Module nouveau: vendor="X.Org Foundation"
[    92.857] compiled for 1.15.99.904, module version = 1.0.10
[    92.857] Module class: X.Org Video Driver
[    92.857] ABI class: X.Org Video Driver, version 18.0
[    92.857] (II) NOUVEAU driver Date:   Thu Nov 7 14:56:48 2013 +1000
[    92.857] (II) NOUVEAU driver for NVIDIA chipset families :
[    92.857] RIVA TNT        (NV04)
[    92.857] RIVA TNT2       (NV05)
[    92.857] GeForce 256     (NV10)
[    92.857] GeForce 2       (NV11, NV15)
[    92.857] GeForce 4MX     (NV17, NV18)
[    92.857] GeForce 3       (NV20)
[    92.857] GeForce 4Ti     (NV25, NV28)
[    92.857] GeForce FX      (NV3x)
[    92.857] GeForce 6       (NV4x)
[    92.857] GeForce 7       (G7x)
[    92.857] GeForce 8       (G8x)
[    92.857] GeForce GTX 200 (NVA0)
[    92.857] GeForce GTX 400 (NVC0)
[    92.857] (++) using VT number 5

[    92.857] (--) controlling tty is VT number 5, auto-enabling KeepTty
[    92.861] (II) [drm] nouveau interface version: 1.1.1
[    92.861] (II) Loading sub module "dri2"
[    92.861] (II) LoadModule: "dri2"
[    92.861] (II) Module "dri2" already built-in
[    92.861] (--) NOUVEAU(0): Chipset: "NVIDIA NVA8"
[    92.861] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    92.861] (==) NOUVEAU(0): RGB weight 888
[    92.861] (==) NOUVEAU(0): Default visual is TrueColor
[    92.861] (==) NOUVEAU(0): Using HW cursor
[    92.861] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[    92.861] (==) NOUVEAU(0): Page flipping enabled
[    92.861] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[    92.928] (II) NOUVEAU(0): Output LVDS-1 using monitor section Monitor0
[    92.949] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    92.951] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[    92.986] (II) NOUVEAU(0): EDID for output LVDS-1
[    92.986] (II) NOUVEAU(0): Manufacturer: SEC  Model: 3245  Serial#: 0
[    92.986] (II) NOUVEAU(0): Year: 2008  Week: 0
[    92.986] (II) NOUVEAU(0): EDID Version: 1.0
[    92.986] (II) NOUVEAU(0): Digital Display Input
[    92.986] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    92.986] (II) NOUVEAU(0): Gamma: 2.20
[    92.986] (II) NOUVEAU(0): No DPMS capabilities specified
[    92.986] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    92.986] (II) NOUVEAU(0): First detailed timing is preferred mode
[    92.986] (II) NOUVEAU(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[    92.986] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[    92.986] (II) NOUVEAU(0): Manufacturer's mask: 0
[    92.986] (II) NOUVEAU(0): Supported detailed timing:
[    92.986] (II) NOUVEAU(0): clock: 72.3 MHz   Image Size:  344 x 194 mm
[    92.986] (II) NOUVEAU(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    92.986] (II) NOUVEAU(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    92.986] (II) NOUVEAU(0): EDID (in hex):
[    92.986] (II) NOUVEAU(0): 00ffffffffffff004ca3453200000000
[    92.986] (II) NOUVEAU(0): 00120100802213780a87f594574f8c27
[    92.986] (II) NOUVEAU(0): 27505400000001010101010101010101
[    92.986] (II) NOUVEAU(0): 010101010101411c56a0500016303020
[    92.986] (II) NOUVEAU(0): 250058c2100000190000000f00000000
[    92.986] (II) NOUVEAU(0): 00000000002387026401000000fe0053
[    92.986] (II) NOUVEAU(0): 414d53554e470a2020202020000000fe
[    92.986] (II) NOUVEAU(0): 004c544e31353641543032303030007c
[    92.986] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[    92.986] (II) NOUVEAU(0): Modeline "1366x768"x60.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    92.986] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz e)
[    92.986] (II) NOUVEAU(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz e)
[    92.986] (II) NOUVEAU(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz e)
[    92.986] (II) NOUVEAU(0): Modeline "720x400"x59.6   22.25  720 744 808 896  400 403 413 417 -hsync +vsync (24.8 kHz e)
[    92.986] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz e)
[    92.986] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.50  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz e)
[    93.007] (II) NOUVEAU(0): EDID for output VGA-1
[    93.009] (II) NOUVEAU(0): EDID for output HDMI-1
[    93.009] (II) NOUVEAU(0): Output LVDS-1 connected
[    93.009] (II) NOUVEAU(0): Output VGA-1 disconnected
[    93.009] (II) NOUVEAU(0): Output HDMI-1 disconnected
[    93.009] (II) NOUVEAU(0): Using exact sizes for initial modes
[    93.009] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1366x768
[    93.009] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    93.009] (--) NOUVEAU(0): Virtual size is 1366x768 (pitch 0)
[    93.009] (**) NOUVEAU(0):  Driver mode "1366x768": 72.3 MHz (scaled from 0.0 MHz), 47.4 kHz, 60.0 Hz
[    93.009] (II) NOUVEAU(0): Modeline "1366x768"x60.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    93.009] (**) NOUVEAU(0):  Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[    93.009] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz e)
[    93.009] (**) NOUVEAU(0):  Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[    93.009] (II) NOUVEAU(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz e)
[    93.009] (**) NOUVEAU(0):  Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[    93.009] (II) NOUVEAU(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz e)
[    93.009] (**) NOUVEAU(0):  Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[    93.009] (II) NOUVEAU(0): Modeline "720x400"x59.6   22.25  720 744 808 896  400 403 413 417 -hsync +vsync (24.8 kHz e)
[    93.009] (**) NOUVEAU(0):  Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[    93.009] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz e)
[    93.009] (**) NOUVEAU(0):  Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[    93.009] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.50  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz e)
[    93.009] (++) NOUVEAU(0): DPI set to (96, 96)
[    93.009] (II) Loading sub module "fb"
[    93.009] (II) LoadModule: "fb"
[    93.010] (II) Loading /usr/lib/xorg/modules/libfb.so
[    93.227] (II) Module fb: vendor="X.Org Foundation"
[    93.227] compiled for 1.16.0, module version = 1.0.0
[    93.227] ABI class: X.Org ANSI C Emulation, version 0.4
[    93.227] (II) Loading sub module "exa"
[    93.227] (II) LoadModule: "exa"
[    93.228] (II) Loading /usr/lib/xorg/modules/libexa.so
[    93.228] (II) Module exa: vendor="X.Org Foundation"
[    93.228] compiled for 1.16.0, module version = 2.6.0
[    93.228] ABI class: X.Org Video Driver, version 18.0
[    93.228] (II) Loading sub module "shadowfb"
[    93.228] (II) LoadModule: "shadowfb"
[    93.317] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    93.474] (II) Module shadowfb: vendor="X.Org Foundation"
[    93.474] compiled for 1.16.0, module version = 1.0.0
[    93.474] ABI class: X.Org ANSI C Emulation, version 0.4
[    93.474] (--) Depth 24 pixmap format is 32 bpp
[    93.476] (II) NOUVEAU(0): Opened GPU channel 0
[    93.629] (II) NOUVEAU(0): [DRI2] Setup complete
[    93.629] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    93.629] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    93.635] (II) EXA(0): Driver allocated offscreen pixmaps
[    93.635] (II) EXA(0): Driver registered support for the following operations:
[    93.635] (II)         Solid
[    93.635] (II)         Copy
[    93.635] (II)         Composite (RENDER acceleration)
[    93.635] (II)         UploadToScreen
[    93.635] (II)         DownloadFromScreen
[    93.635] (==) NOUVEAU(0): Backing store enabled
[    93.635] (==) NOUVEAU(0): Silken mouse enabled
[    93.638] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    93.638] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    93.638] (==) NOUVEAU(0): DPMS enabled
[    93.638] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    93.639] (WW) NOUVEAU(0): Option "XAANoOffscreenPixmaps" is not used
[    93.639] (WW) NOUVEAU(0): Option "AllowGLXWithComposite" is not used
[    93.639] (WW) NOUVEAU(0): Option "TripleBuffer" is not used
[    93.639] (WW) NOUVEAU(0): Option "Legacy3D" is not used
[    93.639] (WW) NOUVEAU(0): Option "XaaNoScanlineImageWriteRect" is not used
[    93.639] (WW) NOUVEAU(0): Option "XaaNoScanlineCPUToScreenColorExpandFill" is not used
[    93.639] (WW) NOUVEAU(0): Option "MonitorLayout" is not used
[    93.639] (WW) NOUVEAU(0): Option "AddARGBGLXVisuals" is not used
[    93.639] (WW) NOUVEAU(0): Option "DisableGLXRootClipping" is not used
[    93.639] (--) RandR disabled
[    93.649] (II) SELinux: Disabled on system
[    99.387] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    99.387] (II) AIGLX: enabled GLX_ARB_create_context
[    99.387] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    99.387] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    99.387] (II) AIGLX: enabled GLX_INTEL_swap_event
[    99.387] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    99.387] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    99.387] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    99.387] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    99.388] (II) AIGLX: Loaded and initialized nouveau
[    99.388] (II) GLX: Initialized DRI2 GL provider for screen 0
[    99.390] (II) NOUVEAU(0): NVEnterVT is called.
[    99.409] (II) NOUVEAU(0): Setting screen physical size to 361 x 203
[    99.409] resize called 1366 768
[   100.461] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   100.461] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   100.461] (II) LoadModule: "evdev"
[   100.461] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   100.465] (II) Module evdev: vendor="X.Org Foundation"
[   100.465] compiled for 1.15.99.904, module version = 2.8.2
[   100.465] Module class: X.Org XInput Driver
[   100.465] ABI class: X.Org XInput driver, version 21.0
[   100.465] (II) Using input driver 'evdev' for 'Power Button'
[   100.465] (**) Power Button: always reports core events
[   100.465] (**) evdev: Power Button: Device: "/dev/input/event3"
[   100.465] (--) evdev: Power Button: Vendor 0 Product 0x1
[   100.465] (--) evdev: Power Button: Found keys
[   100.465] (II) evdev: Power Button: Configuring as keyboard
[   100.465] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[   100.465] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   100.465] (**) Option "xkb_rules" "evdev"
[   100.465] (**) Option "xkb_model" "pc105"
[   100.465] (**) Option "xkb_layout" "us"
[   100.465] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   100.491] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[   100.491] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   100.491] (II) Using input driver 'evdev' for 'Video Bus'
[   100.491] (**) Video Bus: always reports core events
[   100.491] (**) evdev: Video Bus: Device: "/dev/input/event4"
[   100.491] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   100.491] (--) evdev: Video Bus: Found keys
[   100.491] (II) evdev: Video Bus: Configuring as keyboard
[   100.491] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/LNXVIDEO:00/input/input4/event4"
[   100.491] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   100.491] (**) Option "xkb_rules" "evdev"
[   100.491] (**) Option "xkb_model" "pc105"
[   100.491] (**) Option "xkb_layout" "us"
[   100.491] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   100.492] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   100.492] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   100.492] (II) Using input driver 'evdev' for 'Power Button'
[   100.492] (**) Power Button: always reports core events
[   100.492] (**) evdev: Power Button: Device: "/dev/input/event1"
[   100.492] (--) evdev: Power Button: Vendor 0 Product 0x1
[   100.492] (--) evdev: Power Button: Found keys
[   100.492] (II) evdev: Power Button: Configuring as keyboard
[   100.492] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[   100.492] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   100.492] (**) Option "xkb_rules" "evdev"
[   100.492] (**) Option "xkb_model" "pc105"
[   100.492] (**) Option "xkb_layout" "us"
[   100.492] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   100.493] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[   100.493] (II) No input driver specified, ignoring this device.
[   100.493] (II) This device may have been added with another device file.
[   100.493] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[   100.493] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   100.493] (II) Using input driver 'evdev' for 'Sleep Button'
[   100.494] (**) Sleep Button: always reports core events
[   100.494] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[   100.494] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   100.494] (--) evdev: Sleep Button: Found keys
[   100.494] (II) evdev: Sleep Button: Configuring as keyboard
[   100.494] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[   100.494] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   100.494] (**) Option "xkb_rules" "evdev"
[   100.494] (**) Option "xkb_model" "pc105"
[   100.494] (**) Option "xkb_layout" "us"
[   100.494] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   100.495] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event7)
[   100.495] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[   100.495] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   100.495] (**) Logitech USB Receiver: always reports core events
[   100.495] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event7"
[   100.495] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[   100.495] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[   100.495] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[   100.495] (--) evdev: Logitech USB Receiver: Found relative axes
[   100.495] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[   100.495] (II) evdev: Logitech USB Receiver: Configuring as mouse
[   100.495] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[   100.495] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[   100.495] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   100.495] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C52F.0001/input/input8/event7"
[   100.495] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[   100.496] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[   100.496] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[   100.496] (**) Logitech USB Receiver: (accel) acceleration profile 0
[   100.496] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   100.496] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   100.496] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[   100.496] (II) No input driver specified, ignoring this device.
[   100.496] (II) This device may have been added with another device file.
[   100.497] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event8)
[   100.497] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[   100.497] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   100.497] (**) Logitech USB Receiver: always reports core events
[   100.497] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event8"
[   100.497] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[   100.497] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[   100.497] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[   100.497] (--) evdev: Logitech USB Receiver: Found relative axes
[   100.497] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[   100.497] (--) evdev: Logitech USB Receiver: Found absolute axes
[   100.497] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[   100.497] (--) evdev: Logitech USB Receiver: Found keys
[   100.497] (II) evdev: Logitech USB Receiver: Configuring as mouse
[   100.497] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[   100.497] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[   100.497] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[   100.497] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   100.497] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:046D:C52F.0002/input/input9/event8"
[   100.497] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[   100.497] (**) Option "xkb_rules" "evdev"
[   100.497] (**) Option "xkb_model" "pc105"
[   100.497] (**) Option "xkb_layout" "us"
[   100.497] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   100.497] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[   100.497] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[   100.497] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[   100.497] (**) Logitech USB Receiver: (accel) acceleration profile 0
[   100.497] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   100.497] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   100.498] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[   100.498] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   100.498] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   100.498] (**) AT Translated Set 2 keyboard: always reports core events
[   100.498] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event5"
[   100.498] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   100.498] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   100.498] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   100.498] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[   100.498] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[   100.498] (**) Option "xkb_rules" "evdev"
[   100.498] (**) Option "xkb_model" "pc105"
[   100.498] (**) Option "xkb_layout" "us"
[   100.498] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   100.498] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[   100.498] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   100.498] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   100.498] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[   100.498] (II) LoadModule: "synaptics"
[   100.499] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   100.623] (II) Module synaptics: vendor="X.Org Foundation"
[   100.623] compiled for 1.15.99.904, module version = 1.8.0
[   100.623] Module class: X.Org XInput Driver
[   100.623] ABI class: X.Org XInput driver, version 21.0
[   100.623] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   100.623] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   100.623] (**) Option "Device" "/dev/input/event6"
[   100.696] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[   100.696] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672 (res 76)
[   100.696] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4910 (res 120)
[   100.696] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   100.696] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   100.696] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[   100.696] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   100.697] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   100.697] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   100.736] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event6"
[   100.736] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[   100.736] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   100.736] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[   100.736] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[   100.737] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   100.737] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   100.737] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   100.737] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   100.737] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   100.737] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[   100.737] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   132.809] (II) NOUVEAU(0): EDID vendor "SEC", prod id 12869
[   132.809] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x0 mode
[   132.809] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1107 mode
[   132.809] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1100 mode
[   132.809] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   132.809] (II) NOUVEAU(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[   132.867] (II) NOUVEAU(0): EDID vendor "SEC", prod id 12869
[   132.867] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x0 mode
[   132.867] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1107 mode
[   132.867] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1100 mode
[   132.867] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   132.867] (II) NOUVEAU(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[   158.462] (II) NOUVEAU(0): EDID vendor "SEC", prod id 12869
[   158.462] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x0 mode
[   158.462] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1107 mode
[   158.462] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1100 mode
[   158.462] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   158.462] (II) NOUVEAU(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[   172.968] (II) NOUVEAU(0): EDID vendor "SEC", prod id 12869
[   172.968] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x0 mode
[   172.968] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1107 mode
[   172.968] (II) NOUVEAU(0): DDCModeFromDetailedTiming: Ignoring tiny 0x1100 mode
[   172.968] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   172.968] (II) NOUVEAU(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz eP)

[if]

@delice_doluce, xorg.conf dosyasının içeriğini görebilir miyim? Ev dizini altında nvidia, nouveau ile ilgili gizli bir dizin var mı?

[heartsmagic]

Mesele Canlı CD'de de oluşuyorsa sorunun Nvidia'dan kaynaklandığını düşünmüyorum. Tahminim Xorg tarafında ancak xorg.conf dosyası da değildir sorun bence, kendisidir. Knoppix'te olmaması bu tahminimi güçlendiriyor kendi adıma. Tahmin tabi benimki, ayrıca sorunu tam olarak isimlendiremediğimiz için araştırma da yapamıyoruz.

Şöyle bir şey mi acaba mesele diyorum?
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1173649

Ancak burada kart Intel. Çözüm olarak şu sunulmuş:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1173649/comments/51

Ayrıca sonra güncelleme yapılmış. Dediğim gibi sende sorun sürekli olmuyor. xorg kayıtlarında da renk derinliği 24 görünüyor güzel güzel.

[delice_doluca]

@delice_doluce, xorg.conf dosyasının içeriğini görebilir miyim? Ev dizini altında nvidia, nouveau ile ilgili gizli bir dizin var mı?

İçeriği aynen şöyle;

Kod Seç Genişlet

Section "Device"
   Identifier  "Default Device"
   Driver      "nvidia"
   Option      "NoLogo" "True"
   Option      "RegistryDwords" "EnableBrightnessControl=1"
EndSection

Bunu ben oluşturdum zaten, Nvidia sürücüleri yüklüyken ekran parlaklığını ayarlayabilmek için.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 10 Ağustos 2014 - 16:24:57
xorg.conf'un içeriğine bi de "screen" section oluşturdum ve renk derinliğinin 24 bit olduğunu söylemeyi denedim ancak işe yaramadı.