[Çözüldü] Ubuntu kurdum, kablosuz ağları göremiyorum

[vince carter]

Kusura bakmayin boyle yeni konu acmak istemezdim ama ne kisisel ileti gonderebiliyorum ne de kendi konuma yeni bi mesaj atip konumu guncellestirebiliyorum. Ubuntu yukledim ama bi kac sorunum var:

Ubuntu 14.04'u yukledim. Sorunlarim:

Kablosuz İnternete nasil baglaniyoruz?

Ekranda imleci hareket ettirdigim zaman siliklesiyor gorunmuyor bunun sebebi ve cozumu nedir?

Ubuntuyu yukledim baska hicbirsey yapmadim yapmam gereken islemler nedir

[xhektor]

imleç konusunda yardımcı olamayacağım ama kablosuz internete resimdeki gibi bağlanacaksın.

[neynefes]

Diğer başlığınız kilitli değil.

1. Kablosuz internete nasıl bağlanıyoruz derken bağlantı mı yok kablosuz kartını mı görmüyor ??
2. İmleç konusu ekran kartı sürücülerinden olabilir.
3. Ubuntu'yu yükledikten sonra yapılacaklar diye hem forumda hemde farklı mecralarda birçok belge mevcut.

[vince carter]

Arkadasin attigi resimdeki gibi degil benim kablosuz secenekleri. Zaten yarisi ingilizce yarisi turkce oldu sistem. Alt alta sunlar yazili:

Ethernet network disconnected (secilmiyo bu secenek)

Vpn connections(secilebilir)

Enable networking(yaninda tik var)

Connection information(secilemiyo)

Edit connections

[neynefes]

@vince carter, öncelikle ubuntu güncellemelerini ve ayarlarını yapın.

[vince carter]

İnternete baglanamiyoken nasil guncelleme yapacagim?

[neynefes]

https://forum.ubuntu-tr.net/index.php?topic=28764.0

bu çıktıları geçermisiniz

[vince carter]

Telefondan yazmak zorundayim zor olacak ama bunlari nereye yazacagiz? İlk kez ubuntu kullaniyorum kusura bakmayin

[neynefes]

Terminale yazmanız gerekiyor. Ctrl+Alt+T kısayolu ile açılır.

[xhektor]

@ vince carter sanırım yükleme yaparken internet bağlantısını yapmamışsın ve bu yüzden sistemin tam Türkçe değil ve güncelleştirmeler yüklenmemiş. Sana tavsiyem yeni bir kurulum yapman ve kurulum yaparken net bağlantısını (resimde görüldüğü gibi sağ üst köşede olacak) sağlaman.

[vince carter]

@neynefes kusura bakmayin bunlari yazdigimda cok ama cok uzun veriler cikti ve bilgisayarim internete bagli olmadigi icin size aktaramiyorum bunlari 

@xhektor dogru soyluyosun ona ozellikle dikkat ettim ama baslarken lablosuza baglanma gibi bi secenek gelmediki?

[xhektor]

Öncelikle bilgisayarının kablosuz bağlantısının (bir tuşla veya düğmeyle) açık olup olmadığını kontrol et. Eğer açıksa nete bağlanmak için simgeyi göreceksin. Sana kurulum yapmadan önce kurulumu CD veya USB bellekten yapıyorsan ''SINA'' seçeneği ile ubuntu ekranını görmeni ve kuruluma buradan geçmeni öneririm.

[vince carter]

Klavyede fn tusuyla beraber wifi tusuna basiyorum hicbir degisiklik olmuyo. Sina secenegi nedir nasil yapilir bunu da bilmiyorum malesef

[xhektor]

Klavyede fn tusuyla beraber wifi tusuna basiyorum hicbir degisiklik *olmuyor. Sina secenegi nedir nasil yapilir bunu da bilmiyorum malesef

Diyelim ki USB bellekten kuruluma başladın. Sistem ilk açıldığında sana bunun bir kurulum mu yoksa sınama mı olduğunu soracaktır. Sen kuruluma geçmeden önce ''sına'' demelisin. Sistem USB bellekten açılacaktır. Bu şekilde kuruluma başlarsan net bağlantını da önceden sağ üst köşeden yapabilirsin. Bilgisayarın wifi tuş kombinasyonuna basınca bir ışıkla açılıp açılmadığını göstermiyor mu? Eger öyleyse yine dediğim gibi sına ekranından Ubuntu açılınca bunu yapabilirsin. (bilgisayarını formatlamadan önce wifi yı açık bıraksan daha iyi olacakmış)

[vince carter]

Aslinda acik birakmistim ama su sinaama secenegini bi deneyim. Umarim sina modundayken wifiye baglanBilirim

[xhektor]

Aslinda acik birakmistim ama su sinaama secenegini bi deneyim. Umarim sina modundayken wifiye baglanBilirim

Sonucu buradan bizimle paylaşırsan çok sevinirim.

[vince carter]

Suanda usbyi takip yeniden baslattim bilgisayari. Sina modundayim ancak ayni ustlerde bi mesajda belirttigim secenekler var. Hicbi kablosuzu goremiyorum

[heartsmagic]

@vince carter, sorununun üzerine gidebilmemiz için bize @neynefes'in sana gösterdiği o çıktıları, uzun olsalar da aktarman lazım. Hepsini tek tek uygulayıp, sonra bir dosyaya kayıt edip, ardından o dosyayı internet olan bir yer üzerinden buraya aktarman yararlı olabilir.

Eğer imkân varsa kablo ile de bağlanabilirsin. Aksi takdirde bu verilerle sana yardımcı olmamız zor.

[vince carter]

Sistem acilip masaustu geldiginde you are offline now diyor. Zaten sag ustte ag simgesinde de ethernet network disconnected diyor.

Su ciktilari yaziyim fotografini cekip atayim en iyisi

[heartsmagic]

Hayır, ekran görüntüsü yapma lütfen, çok zorlaştırır o işimizi. Hepsini kopyala, bir dosyaya yapıştır. Sana zahmet olmaz, bizler de daha iyi irdeleriz konuyu.

[vince carter]

Kod Seç Genişlet

melih@melih:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=14.04
DISTRIB_CODENAME=trusty
DISTRIB_DESCRIPTION="Ubuntu 14.04.1 LTS"


melih@melih:~$ uname -a
Linux melih 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux


00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1)
02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe (rev 10)
02:00.1 SD Host controller: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader (rev 10)
02:00.2 System peripheral: Broadcom Corporation BCM57765/57785 MS Card Reader (rev 10)
02:00.3 System peripheral: Broadcom Corporation BCM57765/57785 xD-Picture Card Reader (rev 10)
03:00.0 Network controller: Broadcom Corporation BCM43227 802.11b/g/n


melih@melih:~$ lsusb
Bus 002 Device 004: ID 040b:2011 Weltrend Semiconductor
Bus 002 Device 005: ID 0fce:0171 Sony Ericsson Mobile Communications AB
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 1bcf:288a Sunplus Innovation Technology Inc.
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub



melih@melih:~$ rfkill list
0: acer-wireless: Wireless LAN
Soft blocked: no
Hard blocked: no



melih@melih:~$ sudo lshw -C network
[sudo] password for melih:
  *-network               
       description: Ethernet interface
       product: NetLink BCM57785 Gigabit Ethernet PCIe
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:02:00.0
       logical name: eth0
       version: 10
       serial: dc:0e:a1:1c:87:64
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.134 firmware=sb latency=0 link=no multicast=yes port=twisted pair
       resources: irq:16 memory:d1830000-d183ffff memory:d1840000-d184ffff memory:d1850000-d18507ff
  *-network
       description: Network controller
       product: BCM43227 802.11b/g/n
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:03:00.0
       version: 00
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list
       configuration: driver=bcma-pci-bridge latency=0
       resources: irq:17 memory:d1900000-d1903fff



melih@melih:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr dc:0e:a1:1c:87:64 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:16

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:141 errors:0 dropped:0 overruns:0 frame:0
          TX packets:141 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:9985 (9.9 KB)  TX bytes:9985 (9.9 KB)



melih@melih:~$ iwconfig
eth0      no wireless extensions.

lo        no wireless extensions.




melih@melih:~$ iwlist scanning
eth0      Interface doesn't support scanning.

lo        Interface doesn't support scanning.





melih@melih:~$ lsmod
Module                  Size  Used by
bnep                   19624  2
rfcomm                 69160  0
bluetooth             391196  10 bnep,rfcomm
snd_hda_codec_hdmi     46254  1
snd_hda_codec_realtek    61438  1
uvcvideo               80885  0
videobuf2_vmalloc      13216  1 uvcvideo
videobuf2_memops       13362  1 videobuf2_vmalloc
videobuf2_core         40664  1 uvcvideo
videodev              134688  2 uvcvideo,videobuf2_core
snd_hda_intel          52355  3
snd_hda_codec         192906  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep              13602  1 snd_hda_codec
snd_pcm               102099  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
snd_seq_midi           13324  0
snd_seq_midi_event     14899  1 snd_seq_midi
snd_rawmidi            30144  1 snd_seq_midi
intel_rapl             18773  0
snd_seq                61560  2 snd_seq_midi_event,snd_seq_midi
x86_pkg_temp_thermal    14205  0
intel_powerclamp       14705  0
coretemp               13435  0
kvm_intel             143060  0
kvm                   451511  1 kvm_intel
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              29482  2 snd_pcm,snd_seq
crct10dif_pclmul       14289  0
crc32_pclmul           13113  0
ghash_clmulni_intel    13216  0
aesni_intel            55624  0
aes_x86_64             17131  1 aesni_intel
lrw                    13286  1 aesni_intel
gf128mul               14951  1 lrw
glue_helper            13990  1 aesni_intel
snd                    69238  17 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
ablk_helper            13597  1 aesni_intel
cryptd                 20359  3 ghash_clmulni_intel,aesni_intel,ablk_helper
nouveau              1097199  1
serio_raw              13462  0
ttm                    85115  1 nouveau
i915                  783805  3
bcma                   52096  0
lpc_ich                21080  0
drm_kms_helper         53081  2 i915,nouveau
drm                   303102  7 ttm,i915,drm_kms_helper,nouveau
mei_me                 18627  0
mei                    82276  1 mei_me
i2c_algo_bit           13413  2 i915,nouveau
soundcore              12680  1 snd
joydev                 17381  0
acer_wmi               32522  0
sparse_keymap          13948  1 acer_wmi
mxm_wmi                13021  1 nouveau
video                  19476  3 i915,acer_wmi,nouveau
mac_hid                13205  0
wmi                    19177  3 acer_wmi,mxm_wmi,nouveau
parport_pc             32701  0
ppdev                  17671  0
lp                     17759  0
parport                42348  3 lp,ppdev,parport_pc
hid_generic            12548  0
usbhid                 52570  0
hid                   106148  2 hid_generic,usbhid
psmouse               106678  0
sdhci_pci              23172  0
tg3                   166442  0
sdhci                  43015  1 sdhci_pci
ahci                   25819  2
ptp                    18933  1 tg3
libahci                32560  1 ahci
pps_core               19382  1 ptp




[    0.843243] io scheduler deadline registered (default)
[    0.843264] io scheduler cfq registered
[    0.843424] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.843715] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.843727] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.843761] intel_idle: MWAIT substates: 0x21120
[    0.843763] intel_idle: v0.4 model 0x2A
[    0.843764] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.843852] ipmi message handler version 39.2
[    1.259026] ACPI: AC Adapter [ACAD] (on-line)
[    1.259095] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0
[    1.259099] ACPI: Power Button [PWRB]
[    1.259126] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input1
[    1.259143] ACPI: Lid Switch [LID0]
[    1.259169] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2
[    1.259172] ACPI: Sleep Button [SLPB]
[    1.259199] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.259201] ACPI: Power Button [PWRF]
[    1.259366] GHES: HEST is not enabled!
[    1.259452] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.307074] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.307079] ACPI: Battery Slot [BAT0] (battery absent)
[    1.307167] Linux agpgart interface v0.103
[    1.308313] brd: module loaded
[    1.308940] loop: module loaded
[    1.309213] libphy: Fixed MDIO Bus: probed
[    1.309276] tun: Universal TUN/TAP device driver, 1.6
[    1.309277] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.309317] PPP generic driver version 2.4.2
[    1.309357] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.309360] ehci-pci: EHCI PCI platform driver
[    1.309463] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.309468] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.309484] ehci-pci 0000:00:1a.0: debug port 2
[    1.313412] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.313427] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd1a0a000
[    1.323089] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.323134] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.323136] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.323138] usb usb1: Product: EHCI Host Controller
[    1.323140] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[    1.323141] usb usb1: SerialNumber: 0000:00:1a.0
[    1.323242] hub 1-0:1.0: USB hub found
[    1.323254] hub 1-0:1.0: 2 ports detected
[    1.323410] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.323416] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.323431] ehci-pci 0000:00:1d.0: debug port 2
[    1.327343] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.327356] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd1a09000
[    1.339108] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.339148] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.339149] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.339151] usb usb2: Product: EHCI Host Controller
[    1.339153] usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[    1.339154] usb usb2: SerialNumber: 0000:00:1d.0
[    1.339247] hub 2-0:1.0: USB hub found
[    1.339253] hub 2-0:1.0: 2 ports detected
[    1.339326] ehci-platform: EHCI generic platform driver
[    1.339332] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.339333] ohci-pci: OHCI PCI platform driver
[    1.339339] ohci-platform: OHCI generic platform driver
[    1.339344] uhci_hcd: USB Universal Host Controller Interface driver
[    1.339387] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.398520] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.398526] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.398640] mousedev: PS/2 mouse device common for all mice
[    1.401537] rtc_cmos 00:05: RTC can wake from S4
[    1.401683] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.401716] rtc_cmos 00:05: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.401769] device-mapper: uevent: version 1.0.3
[    1.401828] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.401834] ledtrig-cpu: registered to indicate activity on CPUs
[    1.401918] TCP: cubic registered
[    1.401987] NET: Registered protocol family 10
[    1.402127] NET: Registered protocol family 17
[    1.402135] Key type dns_resolver registered
[    1.402335] Loading compiled-in X.509 certificates
[    1.403226] Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7'
[    1.403244] registered taskstats version 1
[    1.405533] Key type trusted registered
[    1.407312] Key type encrypted registered
[    1.409169] AppArmor: AppArmor sha1 policy hashing enabled
[    1.409172] IMA: No TPM chip found, activating TPM-bypass!
[    1.409644] regulator-dummy: disabling
[    1.409757]   Magic number: 10:488:798
[    1.409872] rtc_cmos 00:05: setting system clock to 2014-08-03 19:45:09 UTC (1407095109)
[    1.410491] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.410492] EDD information not available.
[    1.410521] PM: Hibernation image not present or could not be loaded.
[    1.411699] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
[    1.411701] Write protecting the kernel read-only data: 12288k
[    1.413416] Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
[    1.414820] Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
[    1.425339] systemd-udevd[123]: starting version 204
[    1.463657] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.635659] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.768040] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.768044] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.768354] hub 1-1:1.0: USB hub found
[    1.768557] hub 1-1:1.0: 6 ports detected
[    1.815753] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[    1.855889] pps_core: LinuxPPS API ver. 1 registered
[    1.855892] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.857370] PTP clock support registered
[    1.859007] ahci 0000:00:1f.2: version 3.0
[    1.859169] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    1.859208] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.859244] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[    1.859248] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[    1.860644] sdhci: Secure Digital Host Controller Interface driver
[    1.860646] sdhci: Copyright(c) Pierre Ossman
[    1.862157] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10)
[    1.862353] sdhci-pci 0000:02:00.1: dummy supplies not allowed
[    1.862355] mmc0: no vqmmc regulator found
[    1.862357] sdhci-pci 0000:02:00.1: dummy supplies not allowed
[    1.862359] mmc0: no vmmc regulator found
[    1.862475] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA
[    1.863147] tg3.c:v3.134 (Sep 16, 2013)
[    1.864435] scsi0 : ahci
[    1.864524] scsi1 : ahci
[    1.864770] scsi2 : ahci
[    1.864842] scsi3 : ahci
[    1.864904] scsi4 : ahci
[    1.864973] scsi5 : ahci
[    1.865019] ata1: SATA max UDMA/133 abar m2048@0xd1a08000 port 0xd1a08100 irq 41
[    1.865023] ata2: SATA max UDMA/133 abar m2048@0xd1a08000 port 0xd1a08180 irq 41
[    1.865024] ata3: DUMMY
[    1.865026] ata4: DUMMY
[    1.865027] ata5: DUMMY
[    1.865028] ata6: DUMMY
[    1.879742] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.896173] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address dc:0e:a1:1c:87:64
[    1.896178] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[    1.896181] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.896184] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[    2.012438] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.012449] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.012928] hub 2-1:1.0: USB hub found
[    2.016251] hub 2-1:1.0: 6 ports detected
[    2.091938] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[    2.184103] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.188463] ata1.00: ATA-8: WDC WD7500BPVT-22HXZT3, 01.01A01, max UDMA/133
[    2.188473] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.195285] ata1.00: configured for UDMA/133
[    2.195576] scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BPVT-2 01.0 PQ: 0 ANSI: 5
[    2.195738] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.195755] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    2.195758] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.195860] sd 0:0:0:0: [sda] Write Protect is off
[    2.195863] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.195906] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.233713]  sda: sda1 sda2 < sda5 >
[    2.234156] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.349537] usb 1-1.3: New USB device found, idVendor=1bcf, idProduct=288a
[    2.349547] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.349553] usb 1-1.3: Product: 1.3M HD WebCam
[    2.349558] usb 1-1.3: Manufacturer: BRBAH0HGJ
[    2.512562] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.528004] ata2.00: ATAPI: PIONEER DVD-RW DVRTD11RS, 1.01, max UDMA/100
[    2.551635] ata2.00: configured for UDMA/100
[    2.565242] scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW DVRTD11RS 1.01 PQ: 0 ANSI: 5
[    2.581277] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.581289] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.581486] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.581559] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.592715] usb 2-1.2: new high-speed USB device number 3 using ehci-pci
[    2.686436] usb 2-1.2: New USB device found, idVendor=0fce, idProduct=0171
[    2.686447] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[    2.686453] usb 2-1.2: Product: Xperia
[    2.686458] usb 2-1.2: Manufacturer: Sony
[    2.686462] usb 2-1.2: SerialNumber: YT90028ZFC
[    2.768908] usb 2-1.3: new low-speed USB device number 4 using ehci-pci
[    2.816877] Switched to clocksource tsc
[    2.883599] usb 2-1.3: New USB device found, idVendor=040b, idProduct=2011
[    2.883610] usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.883616] usb 2-1.3: Product: GiGa HiD
[    2.887006] hidraw: raw HID events driver (C) Jiri Kosina
[    2.895888] usbcore: registered new interface driver usbhid
[    2.895890] usbhid: USB HID core driver
[    2.897088] input: GiGa HiD as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input7
[    2.897442] hid-generic 0003:040B:2011.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [GiGa HiD] on usb-0000:00:1d.0-1.3/input0
[    3.105770] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.418481] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f01)
[    3.472216] psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x15, 0x0a.
[    3.725763] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[    3.828467] random: init urandom read with 108 bits of entropy available
[    4.230104] random: nonblocking pool is initialized
[   11.648448] Adding 6137852k swap on /dev/sda5.  Priority:-1 extents:1 across:6137852k FS
[   11.750807] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.849903] systemd-udevd[305]: starting version 204
[   11.983988] lp: driver loaded but no devices found
[   11.989511] ppdev: user-space parallel port driver
[   12.020431] wmi: Mapper loaded
[   12.027023] acer_wmi: Acer Laptop ACPI-WMI Extras
[   12.027036] acer_wmi: Function bitmap for Communication Button: 0x1
[   12.027041] acer_wmi: Brightness must be controlled by generic video driver
[   12.027152] acer_wmi: Disabling ACPI video driver
[   12.035564] input: Acer WMI hotkeys as /devices/virtual/input/input8
[   12.035796] input: Acer BMA150 accelerometer as /devices/virtual/input/input9
[   12.454037] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[   12.459859] [drm] Initialized drm 1.1.0 20060810
[   12.466442] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   12.466450] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.466455] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   12.466459] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
[   12.466463] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.466465] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   12.466468] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
[   12.466472] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.466473] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   12.466477] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
[   12.466480] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.466482] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.469181] bcma: bus0: Found chip with id 0xA8DB, rev 0x00 and package 0x08
[   12.469221] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0)
[   12.469251] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0)
[   12.469304] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x12, class 0x0)
[   12.469330] bcma: bus0: Core 3 found: SDIO Device (manuf 0x4BF, id 0x829, rev 0x07, class 0x0)
[   12.488835] bcma: bus0: Bus registered
[   12.491821] [drm] Memory usable by graphics device = 2048M
[   12.503100] MXM: GUID detected in BIOS
[   12.503115] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
[   12.503158] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   12.503184] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
[   12.503204] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   12.503251] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   12.503359] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[   12.503363] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[   12.503395] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[   12.540565] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[   12.540575] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.540577] [drm] Driver supports precise vblank timestamp query.
[   12.541624] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[   12.580146] [drm] Wrong MCH_SSKPD value: 0x16040307
[   12.580147] [drm] This can cause pipe underruns and display issues.
[   12.580147] [drm] Please upgrade your BIOS to fix this.
[   12.598357] fbcon: inteldrmfb (fb0) is primary device
[   12.651153] type=1400 audit(1407095120.724:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=399 comm="apparmor_parser"
[   12.651159] type=1400 audit(1407095120.724:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=399 comm="apparmor_parser"
[   12.651164] type=1400 audit(1407095120.724:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=399 comm="apparmor_parser"
[   12.651666] type=1400 audit(1407095120.724:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=399 comm="apparmor_parser"
[   12.651672] type=1400 audit(1407095120.724:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=399 comm="apparmor_parser"
[   12.651932] type=1400 audit(1407095120.724:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=399 comm="apparmor_parser"
[   12.653583] type=1400 audit(1407095120.728:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=387 comm="apparmor_parser"
[   12.653587] type=1400 audit(1407095120.728:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=387 comm="apparmor_parser"
[   12.653590] type=1400 audit(1407095120.728:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=387 comm="apparmor_parser"
[   12.653949] type=1400 audit(1407095120.728:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=387 comm="apparmor_parser"
[   12.916021] Linux video capture interface: v2.00
[   12.921933] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (1bcf:288a)
[   12.939285] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10
[   12.939366] usbcore: registered new interface driver uvcvideo
[   12.939366] USB Video Class driver (1.1.1)
[   13.270851] Console: switching to colour frame buffer device 170x48
[   13.272815] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   13.272816] i915 0000:00:02.0: registered panic notifier
[   13.273252] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   13.273341] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
[   13.273407] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20131115/video-1246)
[   13.275136] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[   13.275277] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:35/LNXVIDEO:01/input/input12
[   13.275356] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   13.275647] [drm] hdmi device  not found 1 0 1
[   13.275765] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   13.275774] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0c1480a1
[   13.275777] nouveau  [  DEVICE][0000:01:00.0] Chipset: GF108 (NVC1)
[   13.275780] nouveau  [  DEVICE][0000:01:00.0] Family : NVC0
[   13.281427] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[   13.291167] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[   13.291169] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
[   13.291233] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[   13.291235] nouveau  [   VBIOS][0000:01:00.0] checking ACPI for image...
[   13.302489] hda_codec: ALC269VB: SKU not ready 0x598301f0
[   13.303089] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   13.303091]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   13.303093]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   13.303094]    mono: mono_out=0x0
[   13.303094]    inputs:
[   13.303096]      Internal Mic=0x1b
[   13.303097]      Mic=0x18
[   13.303098] realtek: No valid SSID, checking pincfg 0x598301f0 for NID 0x1d
[   13.303099] realtek: Enable default setup for auto mode as fallback
[   13.313466] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   13.313597] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   13.313718] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   13.861818] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   14.314258] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[   14.314261] nouveau  [   VBIOS][0000:01:00.0] using image from ACPI
[   14.314356] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[   14.314359] nouveau  [   VBIOS][0000:01:00.0] version 70.08.3c.00.22
[   14.314783] nouveau  [ DEVINIT][0000:01:00.0] adaptor not initialised
[   14.314786] nouveau  [   VBIOS][0000:01:00.0] running init tables
[   14.429472] nouveau 0000:01:00.0: irq 45 for MSI/MSI-X
[   14.429485] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[   14.429514] nouveau W[     PFB][0000:01:00.0][0x00000000][ffff88008fab4800] reclocking of this ram type unsupported
[   14.429516] nouveau  [     PFB][0000:01:00.0] RAM type: DDR3
[   14.429518] nouveau  [     PFB][0000:01:00.0] RAM size: 1024 MiB
[   14.429519] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
[   14.432961] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 980000uv
[   14.456631] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
[   14.456637] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[   14.456641] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[   14.456666] nouveau  [     CLK][0000:01:00.0] 03: core 50 MHz memory 135 MHz
[   14.456668] nouveau  [     CLK][0000:01:00.0] 07: core 202 MHz memory 324 MHz
[   14.456670] nouveau  [     CLK][0000:01:00.0] 0f: core 672 MHz memory 800 MHz
[   14.456811] nouveau  [     CLK][0000:01:00.0] --: core 202 MHz memory 324 MHz
[   14.459905] vga_switcheroo: enabled
[   14.460036] [TTM] Zone  kernel: Available graphics memory: 2981096 kiB
[   14.460038] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   14.460039] [TTM] Initializing pool allocator
[   14.460042] [TTM] Initializing DMA pool allocator
[   14.460050] nouveau  [     DRM] VRAM: 1024 MiB
[   14.460051] nouveau  [     DRM] GART: 1048576 MiB
[   14.460054] nouveau  [     DRM] TMDS table version 2.0
[   14.460056] nouveau  [     DRM] DCB version 4.0
[   14.460057] nouveau  [     DRM] DCB outp 00: 01000323 00010034
[   14.460059] nouveau  [     DRM] DCB outp 01: 02011300 00000000
[   14.460060] nouveau  [     DRM] DCB outp 02: 02022362 00020010
[   14.460061] nouveau  [     DRM] DCB conn 00: 00000040
[   14.460063] nouveau  [     DRM] DCB conn 01: 00000100
[   14.460064] nouveau  [     DRM] DCB conn 02: 00001261
[   14.460760] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   14.460761] [drm] No driver support for vblank timestamp query.
[   14.465966] nouveau  [     DRM] MM: using COPY0 for buffer copies
[   14.510573] nouveau  [     DRM] allocated 1024x768 fb: 0x60000, bo ffff88008fa76000
[   14.510692] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[   14.510711] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 1
[   15.799741] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   16.045402] init: failsafe main process (610) killed by TERM signal
[   17.307562] Bluetooth: Core ver 2.17
[   17.307576] NET: Registered protocol family 31
[   17.307578] Bluetooth: HCI device and connection manager initialized
[   17.307584] Bluetooth: HCI socket layer initialized
[   17.307586] Bluetooth: L2CAP socket layer initialized
[   17.307589] Bluetooth: SCO socket layer initialized
[   17.311554] init: cups main process (711) killed by HUP signal
[   17.311565] init: cups main process ended, respawning
[   17.312142] Bluetooth: RFCOMM TTY layer initialized
[   17.312152] Bluetooth: RFCOMM socket layer initialized
[   17.312157] Bluetooth: RFCOMM ver 1.11
[   17.347617] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.347621] Bluetooth: BNEP filters: protocol multicast
[   17.347629] Bluetooth: BNEP socket layer initialized
[   18.101872] tg3 0000:02:00.0: irq 46 for MSI/MSI-X
[   18.101878] tg3 0000:02:00.0: irq 47 for MSI/MSI-X
[   18.101881] tg3 0000:02:00.0: irq 48 for MSI/MSI-X
[   18.101884] tg3 0000:02:00.0: irq 49 for MSI/MSI-X
[   18.101887] tg3 0000:02:00.0: irq 50 for MSI/MSI-X
[   18.567873] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.568122] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.751907] audit_printk_skb: 15 callbacks suppressed
[   18.751911] type=1400 audit(1407095126.820:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=805 comm="apparmor_parser"
[   18.751920] type=1400 audit(1407095126.820:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=805 comm="apparmor_parser"
[   18.752227] type=1400 audit(1407095126.820:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=805 comm="apparmor_parser"
[   18.754135] type=1400 audit(1407095126.820:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=806 comm="apparmor_parser"
[   18.754146] type=1400 audit(1407095126.820:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=806 comm="apparmor_parser"
[   18.754152] type=1400 audit(1407095126.820:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=806 comm="apparmor_parser"
[   18.754641] type=1400 audit(1407095126.820:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=809 comm="apparmor_parser"
[   18.754647] type=1400 audit(1407095126.820:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=809 comm="apparmor_parser"
[   18.754651] type=1400 audit(1407095126.820:25): apparmor="STATUS" operation="profile_load" profile="unconfined" name="pxgsettings" pid=809 comm="apparmor_parser"
[   18.754654] type=1400 audit(1407095126.820:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=809 comm="apparmor_parser"
[   20.857177] init: plymouth-upstart-bridge main process ended, respawning
[   20.869117] init: plymouth-upstart-bridge main process ended, respawning
[   45.680207] usb 2-1.2: usbfs: process 1758 (pool) did not claim interface 0 before use
[   45.750135] usb 2-1.2: reset high-speed USB device number 3 using ehci-pci
[   45.849391] usb 2-1.2: usbfs: process 1758 (pool) did not claim interface 0 before use
[   45.918324] usb 2-1.2: reset high-speed USB device number 3 using ehci-pci
[   46.017952] usb 2-1.2: usbfs: process 1758 (pool) did not claim interface 0 before use
[   46.018068] usb 2-1.2: usbfs: process 1758 (pool) did not claim interface 0 before use
[   46.548890] audit_printk_skb: 123 callbacks suppressed
[   46.548893] type=1400 audit(1407095154.584:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1796 comm="apparmor_parser"
[   46.548898] type=1400 audit(1407095154.584:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1796 comm="apparmor_parser"
[   46.549240] type=1400 audit(1407095154.584:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1796 comm="apparmor_parser"
[  157.239728] systemd-hostnamed[1918]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[  169.712079] usb 2-1.2: USB disconnect, device number 3
[  172.731037] usb 2-1.2: new high-speed USB device number 5 using ehci-pci
[  172.830615] usb 2-1.2: New USB device found, idVendor=0fce, idProduct=0171
[  172.830626] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[  172.830632] usb 2-1.2: Product: Xperia
[  172.830637] usb 2-1.2: Manufacturer: Sony
[  172.830666] usb 2-1.2: SerialNumber: YT90028ZFC



melih@melih:~$ dmesg | tail
[   46.548898] type=1400 audit(1407095154.584:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1796 comm="apparmor_parser"
[   46.549240] type=1400 audit(1407095154.584:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1796 comm="apparmor_parser"
[  157.239728] systemd-hostnamed[1918]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[  169.712079] usb 2-1.2: USB disconnect, device number 3
[  172.731037] usb 2-1.2: new high-speed USB device number 5 using ehci-pci
[  172.830615] usb 2-1.2: New USB device found, idVendor=0fce, idProduct=0171
[  172.830626] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[  172.830632] usb 2-1.2: Product: Xperia
[  172.830637] usb 2-1.2: Manufacturer: Sony
[  172.830666] usb 2-1.2: SerialNumber: YT90028ZFC


Ya umarim yanlis bisey yapmamisimdir usb takili degildi telefonu kullandim kopyalama islemleri icin. Usb Takili olmadi gerekiyosa bi Daha ugrasirim

[heartsmagic]

Şimdi, bu kart için çözüm önerilerimiz mevcut:
https://forum.ubuntu-tr.net/index.php?topic=36902.msg443918#msg443918
https://forum.ubuntu-tr.net/index.php?topic=37276.msg448310#msg448310

Fakat, bunları denemek için ne yazık ki kablo ile bağlanman yararına olacaktır. Aksi takdirde sana paket indirip Ubuntu tarafına taşıtmamız gerekiyor ki, orada da bağımlılık sorunlarını çözmemiz lazım. Geçici olarak internete bağlanman mümkün mü kablo ile?

[vince carter]

Şimdi, bu kart için çözüm önerilerimiz mevcut:
https://forum.ubuntu-tr.net/index.php?topic=36902.msg443918#msg443918
https://forum.ubuntu-tr.net/index.php?topic=37276.msg448310#msg448310

Fakat, bunları denemek için ne yazık ki kablo ile bağlanman yararına olacaktır. Aksi takdirde sana paket indirip Ubuntu tarafına taşıtmamız gerekiyor ki, orada da bağımlılık sorunlarını çözmemiz lazım. Geçici olarak internete bağlanman mümkün mü kablo ile?

Deneyecegim cok tesekkur ederim. Cozume ulasirsa buradan bilgilendirme yaparim

[heartsmagic]

Çıktıları mutlaka aktar buraya ama, görüp değerlendirelim.
Bu arada, normalde kod etiketi kullanıyoruz: http://kb.ubuntu-tr.net/http://kb.ubuntu-tr.net/kodetiketi 
Ancak telefondan zor olabilir, normal sisteme geçince aklında olsun.

Eğer kablolu bağlantı yapıp bir süre kullanabilirsen mutlaka başlığını güncelle ki forumda olan birileri bakmaya çalışsın. İnan bağlantı sağlarsan daha rahat çözülür bu mesele.

Hatta şimdi baktım da 14.04 üzerinde doğrudan bcmwl-kernel-source ve dkms paketi yeterli diyen olmuş. Sana bir elle indirtmeyi deneriz eğer kablolu bağlantı kuramazsan. Yok, bağlantıyı kurabilirsen hemen şunu dene:

Kod Seç Genişlet

sudo apt-get update
sudo-apt-get upgrade

Sistem güncellenir bu komutlarla. Sonra sürücü için gerekli paketleri kur:

Kod Seç Genişlet

sudo apt-get install bcmwl-kernel-source dkms

Ardından modülü yüklemeyi dene:

Kod Seç Genişlet

sudo modprobe wl
Bu aşamadan sonra kablosuz ağları görebilmen lazım, tabi işlemler yolunda giderse. Eğer kablolu bağlantı sağlayamazsan ki esasında bunu hemen şimdi de deneyebilirsin şunu yap:
http://nl.archive.ubuntu.com/ubuntu/pool/restricted/b/bcmwl/bcmwl-kernel-source_6.30.223.141+bdcom-0ubuntu2_amd64.deb
http://nl.archive.ubuntu.com/ubuntu/pool/main/d/dkms/dkms_2.2.0.3-1.1ubuntu5_all.deb

Bu iki paketi indir ve Ubuntu tarafına taşı, örneğin masaüstüne. Sistem Türkçe ise:

Kod Seç Genişlet

cd ~/Masaüstü
sudo dpkg -i *.deb

ile kurup hemen modülü yüklemeyi dene:

Kod Seç Genişlet

sudo modprobe wl

Not: Linux küçük/büyük harf farkı gözetir, bu nedenle masaüstü ile Masaüstü farklı dizinlerdir. Dikkatlice uygularsın komutları ve mutlaka ama mutlaka tüm uyguladıklarını buraya aktarırsın.

[vince carter]

şu anda bilgisayarımdan yazıyorum. ikinci seçeneği deneyeyim dedim. söylediğiniz iki paketi indirdim masaüstüne attım. sonra komutları uyguladım. 2-3 dakika bekletti ve ''wifi enable'' yazısı geldi sağ köşede. şuanda sorunsuz bağlanabiliyorum. emeği geçenlere ve özellikle @heartsmagic'e çok teşekkür ederim.