[Çözüldü] Plymouth ve ACPI sürücüsü sorunları

[yasin y.]

Arkadaşlar merhaba,

Yine birkaç sorunla daha karşınızdayım Bir hafta oldu kullanmaya başlayalı ve sanırım GNU/Linux ortamına alıştım ve bu tür sistemler "alternatif" işletim sistemi değil windows ve macintosh'un rakibi işletim sistemleriymiş. Bir ev kullanıcısının diğerlerinde yapıpta GNU/linux sistemlerde yapamayacağı Bir şey yok bence. Çok konuştum sorunlarıma geleyim. Unity masaüstünü pek sevemediğim için Gnome Ubuntu kurdum birkaç gün önce, ancak boot sırasında ekran kararıp tekrar geliyordu, arada bir yerde sarı renkli yazılar geliyor, okuyamadan kayboluyordu. Bende grub'u yürüttüğü kodları göstericek şekilde değiştirdim ve ;

"plymouth" lu kısımda takılııyor 5-10 sn sonra 2. resimde gördüğünüz sarı yazılı ekrana atıyor oradada biraz beklettikten sonra oturum açma ekranı geliyor. Bu arada "kvm" li uyarıya takılmayın onun çözümünü buldum. İlk sorunum buydu ikincisi ise ; "dmesg" çıktısında göreceğiniz gibi ACPI driver hatası alıyorum yerel sürücü yerine uygunsürücüyü yüklemek lazımmış aradım bulamadım, makinanın destek sitesinde windows için mecut sadece. Dmesg çıtısı :

Kod Seç Genişlet

[    0.544534] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.544555] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.544588] ehci-pci 0000:00:1a.0: debug port 2
[    0.548503] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.548521] ehci-pci 0000:00:1a.0: irq 16, io mem 0xb571d000
[    0.560017] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.560747] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.561415] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.562075] usb usb1: Product: EHCI Host Controller
[    0.562725] usb usb1: Manufacturer: Linux 3.14.13-031413-generic ehci_hcd
[    0.563374] usb usb1: SerialNumber: 0000:00:1a.0
[    0.564112] hub 1-0:1.0: USB hub found
[    0.564748] hub 1-0:1.0: 2 ports detected
[    0.565536] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.566155] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.566792] ehci-pci 0000:00:1d.0: debug port 2
[    0.571305] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.571324] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb571c000
[    0.580051] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.580710] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.581323] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.581933] usb usb2: Product: EHCI Host Controller
[    0.582535] usb usb2: Manufacturer: Linux 3.14.13-031413-generic ehci_hcd
[    0.583141] usb usb2: SerialNumber: 0000:00:1d.0
[    0.583869] hub 2-0:1.0: USB hub found
[    0.584485] hub 2-0:1.0: 2 ports detected
[    0.585168] ehci-platform: EHCI generic platform driver
[    0.585756] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.586342] ohci-pci: OHCI PCI platform driver
[    0.586930] ohci-platform: OHCI generic platform driver
[    0.587513] uhci_hcd: USB Universal Host Controller Interface driver
[    0.588196] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.588783] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.589448] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.589465] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[    0.589517] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.590096] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.590668] usb usb3: Product: xHCI Host Controller
[    0.591228] usb usb3: Manufacturer: Linux 3.14.13-031413-generic xhci_hcd
[    0.591790] usb usb3: SerialNumber: 0000:00:14.0
[    0.592501] hub 3-0:1.0: USB hub found
[    0.593075] hub 3-0:1.0: 14 ports detected
[    0.596256] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.596808] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.597399] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.597963] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.598529] usb usb4: Product: xHCI Host Controller
[    0.599092] usb usb4: Manufacturer: Linux 3.14.13-031413-generic xhci_hcd
[    0.599662] usb usb4: SerialNumber: 0000:00:14.0
[    0.600362] hub 4-0:1.0: USB hub found
[    0.600935] hub 4-0:1.0: 4 ports detected
[    0.602118] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.619103] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.619679] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.620479] mousedev: PS/2 mouse device common for all mice
[    0.621359] rtc_cmos 00:06: RTC can wake from S4
[    0.622070] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.622662] rtc_cmos 00:06: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.623286] device-mapper: uevent: version 1.0.3
[    0.623924] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.624536] Intel P-state driver initializing.
[    0.625124] Intel pstate controlling: cpu 0
[    0.625716] Intel pstate controlling: cpu 1
[    0.626196] Intel pstate controlling: cpu 2
[    0.626679] Intel pstate controlling: cpu 3
[    0.627161] ledtrig-cpu: registered to indicate activity on CPUs
[    0.627613] EFI Variables Facility v0.08 2004-May-17
[    0.630957] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.649233] TCP: cubic registered
[    0.649775] NET: Registered protocol family 10
[    0.650408] NET: Registered protocol family 17
[    0.650870] Key type dns_resolver registered
[    0.651601] Loading compiled-in X.509 certificates
[    0.652622] Loaded X.509 cert 'Magrathea: Glacier signing key: fbb76aa7123a53f39ec4e0b6ceb14f39bd4abadf'
[    0.653133] registered taskstats version 1
[    0.655208] Key type trusted registered
[    0.657158] Key type encrypted registered
[    0.659054] AppArmor: AppArmor sha1 policy hashing enabled
[    0.659535] IMA: No TPM chip found, activating TPM-bypass!
[    0.660337] regulator-dummy: disabling
[    0.660854]   Magic number: 6:198:695
[    0.661350] pci 0000:00:00.0: hash matches
[    0.661883] rtc_cmos 00:06: setting system clock to 2014-07-30 17:41:32 UTC (1406742092)
[    0.662409] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.662890] EDD information not available.
[    0.663393] PM: Hibernation image not present or could not be loaded.
[    0.684136] ACPI: Battery Slot [BAT0] (battery present)
[    0.685647] Freeing unused kernel memory: 1356K (ffffffff81d17000 - ffffffff81e6a000)
[    0.686127] Write protecting the kernel read-only data: 12288k
[    0.687660] Freeing unused kernel memory: 580K (ffff88000276f000 - ffff880002800000)
[    0.689006] Freeing unused kernel memory: 508K (ffff880002b81000 - ffff880002c00000)
[    0.701135] systemd-udevd[123]: starting version 204
[    0.723680] psmouse: module verification failed: signature and/or  required key missing - tainting kernel
[    0.725329] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.726248] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.727208] ahci 0000:00:1f.2: version 3.0
[    0.727346] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    0.727365] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.728308] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x14 impl SATA mode
[    0.729241] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[    0.730423] r8169 0000:08:00.0: irq 46 for MSI/MSI-X
[    0.730595] r8169 0000:08:00.0 eth0: RTL8106e at 0xffffc90010c9e000, 28:d2:44:39:28:e6, XID 04900000 IRQ 46
[    0.737945] scsi0 : ahci
[    0.739081] scsi1 : ahci
[    0.740168] scsi2 : ahci
[    0.741259] scsi3 : ahci
[    0.742333] scsi4 : ahci
[    0.743276] ata1: DUMMY
[    0.744145] ata2: DUMMY
[    0.745068] ata3: SATA max UDMA/133 abar m2048@0xb571b000 port 0xb571b200 irq 45
[    0.746005] ata4: DUMMY
[    0.746953] ata5: SATA max UDMA/133 abar m2048@0xb571b000 port 0xb571b300 irq 45
[    0.876077] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.008404] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.009054] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.009918] hub 1-1:1.0: USB hub found
[    1.010521] hub 1-1:1.0: 6 ports detected
[    1.068064] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.073553] ata3.00: ATAPI: PLDS    DVD-RW DU8A5SH, NL61, max UDMA/100
[    1.080377] ata3.00: configured for UDMA/100
[    1.089992] scsi 2:0:0:0: CD-ROM            PLDS     DVD-RW DU8A5SH   NL61 PQ: 0 ANSI: 5
[    1.109906] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.110550] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.111277] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.111343] sr 2:0:0:0: Attached scsi generic sg0 type 5
[    1.124061] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.256399] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.257060] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.257916] hub 2-1:1.0: USB hub found
[    1.259153] hub 2-1:1.0: 8 ports detected
[    1.428061] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.428063] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.527613] ata5.00: ATA-9: ST1000LM014-1EJ164, LVD3, max UDMA/133
[    1.528292] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.571990] ata5.00: configured for UDMA/133
[    1.572769] scsi 4:0:0:0: Direct-Access     ATA      ST1000LM014-1EJ1 LVD3 PQ: 0 ANSI: 5
[    1.573539] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.573581] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    1.574721] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    1.575259] sd 4:0:0:0: [sda] Write Protect is off
[    1.575773] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.575782] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.579597]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12
[    1.580986] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.718273] usb 3-1: New USB device found, idVendor=13d3, idProduct=5170
[    1.718953] usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.719605] usb 3-1: Product: Lenovo EasyCamera
[    1.720144] usb 3-1: Manufacturer: Azurewave
[    1.720696] usb 3-1: SerialNumber: NULL
[    1.892074] usb 3-7: new full-speed USB device number 3 using xhci_hcd
[    1.893944] input: ALPS PS/2 Device as /devices/platform/i8042/serio1/input/input6
[    1.915022] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input5
[    2.020976] usb 3-7: New USB device found, idVendor=8087, idProduct=07dc
[    2.021605] usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.188050] usb 3-10: new full-speed USB device number 4 using xhci_hcd
[    2.376687] usb 3-10: New USB device found, idVendor=045e, idProduct=0745
[    2.377360] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.378023] usb 3-10: Product: Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0
[    2.378615] usb 3-10: Manufacturer: Microsoft
[    2.381601] hidraw: raw HID events driver (C) Jiri Kosina
[    2.394936] usbcore: registered new interface driver usbhid
[    2.395605] usbhid: USB HID core driver
[    2.399012] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:045E:0745.0001/input/input7
[    2.399697] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:14.0-10/input0
[    2.400511] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.1/0003:045E:0745.0002/input/input8
[    2.401253] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:14.0-10/input1
[    2.411098] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.2/0003:045E:0745.0003/input/input9
[    2.412018] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:14.0-10/input2
[    4.395561] random: nonblocking pool is initialized
[    4.452356] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
[    8.090685] init: plymouth-upstart-bridge main process (195) terminated with status 1
[    8.091528] init: plymouth-upstart-bridge main process ended, respawning
[    8.094093] init: plymouth-upstart-bridge main process (206) terminated with status 1
[    8.094907] init: plymouth-upstart-bridge main process ended, respawning
[    8.097295] init: plymouth-upstart-bridge main process (208) terminated with status 1
[    8.098086] init: plymouth-upstart-bridge main process ended, respawning
[    8.100368] init: plymouth-upstart-bridge main process (210) terminated with status 1
[    8.101070] init: plymouth-upstart-bridge main process ended, respawning
[    8.103424] init: plymouth-upstart-bridge main process (212) terminated with status 1
[    8.104239] init: plymouth-upstart-bridge main process ended, respawning
[    8.106601] init: plymouth-upstart-bridge main process (214) terminated with status 1
[    8.107340] init: plymouth-upstart-bridge main process ended, respawning
[    8.109828] init: plymouth-upstart-bridge main process (216) terminated with status 1
[    8.110565] init: plymouth-upstart-bridge main process ended, respawning
[    8.112765] init: plymouth-upstart-bridge main process (218) terminated with status 1
[    8.113419] init: plymouth-upstart-bridge main process ended, respawning
[    8.115732] init: plymouth-upstart-bridge main process (220) terminated with status 1
[    8.116482] init: plymouth-upstart-bridge main process ended, respawning
[    8.118796] init: plymouth-upstart-bridge main process (222) terminated with status 1
[    8.119505] init: plymouth-upstart-bridge main process ended, respawning
[    8.121876] init: plymouth-upstart-bridge main process (224) terminated with status 1
[    8.122579] init: plymouth-upstart-bridge respawning too fast, stopped
[    8.448314] init: ureadahead main process (198) terminated with status 5
[   12.295556] Adding 3999740k swap on /dev/sda10.  Priority:-1 extents:1 across:3999740k FS
[   13.905421] systemd-udevd[332]: starting version 204
[   15.302120] lp: driver loaded but no devices found
[   15.354339] ppdev: user-space parallel port driver
[   16.541681] wmi: Mapper loaded
[   16.895611] input: Ideapad extra buttons as /devices/platform/VPC2004:00/input/input10
[   17.178392] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x10
[   17.538082] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182f conflicts with OpRegion 0x0000000000001800-0x000000000000187f (\PMIO) (20131218/utaddress-258)
[   17.538090] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.538094] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083f conflicts with OpRegion 0x0000000000000800-0x000000000000083f (\GPRL) (20131218/utaddress-258)
[   17.538099] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083f conflicts with OpRegion 0x0000000000000800-0x0000000000000bff (\GPR_) (20131218/utaddress-258)
[   17.538103] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083f conflicts with OpRegion 0x0000000000000800-0x000000000000085f (\_SB_.PCI0.PEG1.PEGP.GPIO) (20131218/utaddress-258)
[   17.538107] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.538109] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000083f (\GPRL) (20131218/utaddress-258)
[   17.538113] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x0000000000000bff (\GPR_) (20131218/utaddress-258)
[   17.538117] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20131218/utaddress-258)
[   17.538121] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000085f (\_SB_.PCI0.PEG1.PEGP.GPIO) (20131218/utaddress-258)
[   17.538125] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.538127] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   17.542815] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x10
[   17.542830] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x10
[   17.542841] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x10
[   17.542923] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   17.555148] [drm] Initialized drm 1.1.0 20060810
[   17.622032] cfg80211: Calling CRDA to update world regulatory domain
[   17.853720] Linux video capture interface: v2.00
[   17.949068] [drm] Memory usable by graphics device = 2048M
[   17.949072] checking generic (c0000000 410000) vs hw (c0000000 10000000)
[   17.949073] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[   17.949088] Console: switching to colour dummy device 80x25
[   17.958179] Intel(R) Wireless WiFi driver for Linux, in-tree:
[   17.958182] Copyright(c) 2003- 2014 Intel Corporation
[   17.958309] iwlwifi 0000:09:00.0: irq 47 for MSI/MSI-X
[   17.970096] Bluetooth: Core ver 2.18
[   17.970111] NET: Registered protocol family 31
[   17.970112] Bluetooth: HCI device and connection manager initialized
[   17.970118] Bluetooth: HCI socket layer initialized
[   17.970119] Bluetooth: L2CAP socket layer initialized
[   17.970124] Bluetooth: SCO socket layer initialized
[   17.972067] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[   17.972075] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   17.972076] [drm] Driver supports precise vblank timestamp query.
[   17.972148] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   18.023442] usbcore: registered new interface driver btusb
[   18.036325] Bluetooth: hci0: read Intel version: 370710018002030d00
[   18.070659] AVX2 version of gcm_enc/dec engaged.
[   18.161162] fbcon: inteldrmfb (fb0) is primary device
[   18.269473] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[   18.280669] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (13d3:5170)
[   18.285952] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input11
[   18.286040] usbcore: registered new interface driver uvcvideo
[   18.286040] USB Video Class driver (1.1.1)
[   18.376368] iwlwifi 0000:09:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
[   18.387350] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[   19.517745] iwlwifi 0000:09:00.0: Detected Intel(R) Wireless N 7260, REV=0x144
[   19.517796] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[   19.518022] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[   19.776151] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   19.796152] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   19.812114] Console: switching to colour frame buffer device 170x48
[   19.814014] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   19.814015] i915 0000:00:02.0: registered panic notifier
[   19.814441] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   19.814678] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[   19.814682] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20131218/psargs-359)
[   19.814686] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG1.PEGP.DD02._BCL] (Node ffff8801d886dcf8), AE_NOT_FOUND (20131218/psparse-536)
[   19.814731] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4c/LNXVIDEO:00/input/input12
[   19.841076] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   19.841374] acpi device:66: registered as cooling_device5
[   19.841469] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13
[   19.841571] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   19.841741] mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
[   19.843649] HDA driver get symbol successfully from i915 module
[   19.843775] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[   19.848052] snd_hda_intel 0000:00:03.0: irq 51 for MSI/MSI-X
[   19.867327] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[   19.867413] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[   19.867477] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[   19.918414] SKU: Nid=0x0 sku_cfg=0x00003801
[   19.918417] SKU: port_connectivity=0x0
[   19.918419] SKU: enable_pcbeep=0x1
[   19.918420] SKU: check_sum=0x00000000
[   19.918421] SKU: customization=0x00000000
[   19.918422] SKU: external_amp=0x0
[   19.918423] SKU: platform_type=0x0
[   19.918423] SKU: swap=0x0
[   19.918424] SKU: override=0x1
[   19.918661] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   19.918663]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   19.918665]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   19.918666]    mono: mono_out=0x0
[   19.918666]    inputs:
[   19.918668]      Mic=0x19
[   19.918669]      Internal Mic=0x12
[   19.918671] realtek: Enabling init ASM_ID=0x3801 CODEC_ID=10ec0282
[   19.923172] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[   19.923248] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[   19.928210] cfg80211: World regulatory domain updated:
[   19.928212] cfg80211:  DFS Master region: unset
[   19.928214] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   19.928215] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.928217] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.928218] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.928219] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.928220] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.247154] audit: type=1400 audit(1406731312.080:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=490 comm="apparmor_parser"
[   20.247159] audit: type=1400 audit(1406731312.080:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=490 comm="apparmor_parser"
[   20.247161] audit: type=1400 audit(1406731312.080:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=490 comm="apparmor_parser"
[   20.247299] audit: type=1400 audit(1406731312.080:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=412 comm="apparmor_parser"
[   20.247306] audit: type=1400 audit(1406731312.080:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=412 comm="apparmor_parser"
[   20.247310] audit: type=1400 audit(1406731312.080:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=412 comm="apparmor_parser"
[   20.247317] audit: type=1400 audit(1406731312.080:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=413 comm="apparmor_parser"
[   20.247322] audit: type=1400 audit(1406731312.080:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=413 comm="apparmor_parser"
[   20.247327] audit: type=1400 audit(1406731312.080:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=413 comm="apparmor_parser"
[   20.247452] audit: type=1400 audit(1406731312.080:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=490 comm="apparmor_parser"
[   26.035820] EXT4-fs (sda11): re-mounted. Opts: errors=remount-ro
[   26.639123] EXT4-fs (sda9): mounting ext2 file system using the ext4 subsystem
[   26.645759] EXT4-fs (sda9): mounted filesystem without journal. Opts: (null)
[   28.278867] EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: (null)
[   29.317271] init: failsafe main process (694) killed by TERM signal
[   30.056781] audit_printk_skb: 24 callbacks suppressed
[   30.056784] audit: type=1400 audit(1406731321.892:20): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=818 comm="apparmor_parser"
[   30.056788] audit: type=1400 audit(1406731321.892:21): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=818 comm="apparmor_parser"
[   30.056790] audit: type=1400 audit(1406731321.892:22): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=818 comm="apparmor_parser"
[   30.057031] audit: type=1400 audit(1406731321.892:23): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=818 comm="apparmor_parser"
[   30.057034] audit: type=1400 audit(1406731321.892:24): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=818 comm="apparmor_parser"
[   30.057158] audit: type=1400 audit(1406731321.892:25): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=818 comm="apparmor_parser"
[   30.264096] audit: type=1400 audit(1406731322.100:26): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=822 comm="apparmor_parser"
[   30.279340] audit: type=1400 audit(1406731322.112:27): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=821 comm="apparmor_parser"
[   30.279344] audit: type=1400 audit(1406731322.112:28): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=821 comm="apparmor_parser"
[   30.279347] audit: type=1400 audit(1406731322.112:29): apparmor="STATUS" operation="profile_load" name="pxgsettings" pid=821 comm="apparmor_parser"
[   32.190218] init: cups main process (890) killed by HUP signal
[   32.190227] init: cups main process ended, respawning
[   32.590201] Bluetooth: RFCOMM TTY layer initialized
[   32.590212] Bluetooth: RFCOMM socket layer initialized
[   32.590216] Bluetooth: RFCOMM ver 1.11
[   32.986506] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   32.986510] Bluetooth: BNEP filters: protocol multicast
[   32.986518] Bluetooth: BNEP socket layer initialized
[   36.665210] r8169 0000:08:00.0 eth0: link down
[   36.665235] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   36.666763] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[   36.666990] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[   36.688819] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   38.338862] wlan0: authenticate with 00:1c:7b:f5:a5:8f
[   38.341093] wlan0: send auth to 00:1c:7b:f5:a5:8f (try 1/3)
[   38.342850] wlan0: authenticated
[   38.344025] wlan0: associate with 00:1c:7b:f5:a5:8f (try 1/3)
[   38.346885] wlan0: RX AssocResp from 00:1c:7b:f5:a5:8f (capab=0x411 status=0 aid=2)
[   38.347489] wlan0: associated
[   38.347503] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   38.568061] bbswitch: version 0.7
[   38.568073] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   38.568078] bbswitch: Found discrete VGA device 0000:07:00.0: \_SB_.PCI0.PEG1.PEGP
[   38.568089] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[   38.568163] bbswitch: detected an Optimus _DSM function
[   38.568174] pci 0000:07:00.0: enabling device (0006 -> 0007)
[   38.568221] bbswitch: Succesfully loaded. Discrete card 0000:07:00.0 is on
[   38.570068] bbswitch: disabling discrete graphics
[   38.570076] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[   48.585985] init: Failed to spawn nvidia-persistenced main process: unable to execute: No such file or directory
[   53.119978] audit_printk_skb: 123 callbacks suppressed
[   53.119981] audit: type=1400 audit(1406731344.952:71): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/etc/dconf/profile/gdm" pid=1489 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=115 ouid=0
[   61.583641] audit: type=1400 audit(1406731353.417:72): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1587 comm="apparmor_parser"
[   61.583646] audit: type=1400 audit(1406731353.417:73): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1587 comm="apparmor_parser"
[   61.583892] audit: type=1400 audit(1406731353.417:74): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1587 comm="apparmor_parser"


Bu çıktıda gördüğünüz başka sorun varsa belirtirmisiniz lütfen ? Kernel'i 3.13' ten 3.14'e güncelledim imleçsürer için bu arada. Son olarak ekran doygunluğunu arttırmak için "xgamma" .icc profili kullanmak haricinde bir çözüm varmıdır acaba ? Yanlış yere açtıysam ksusruma bakmayın.

[heartsmagic]

ACPI sorunu için konuşalım, genel olarak herkesin söylediği bunun zararsız bir uyarı olduğu ve üstüne gitmesen de olacağı yönünde. Eğer başını ağrıtan bir şey yoksa uğraşmaya değmez. Yeni yükselttiğin çekirdekten ötürü olabilir, BIOS güncellemesi gerekiyor olabilir vs.

Bu plymouth sorunu Gnome Shell öncesi yok muydu? Gnome Ubuntu kurdum dediğin, Gnome Shell kurman değil mi?

[yasin y.]

Evet onları bende okudum @heartsmagic ama HDD'im Ubuntu çalıştırırken windows'a göre 8-10 derece daha sıcak, 44-46 C arası oluyor sıcaklığı genelde. Bu ACPI hatalarının bunula ilgisi olabilceğini düşünmüştüm. Takas alanındanda kaynaklı olabileceği yazıyordu bir konuda. Hayır Gnome Kabuğu değil http://ubuntugnome.org/ sitesinden indirip kurmuştum ama takas alanı olmasına rağmen uykuya geçiremediğim için kaldırıp normal ubuntu kurdum şuan. Ve son olarak  plymouth sorunu; onunda sebebi GRUB_CMDLINE_LINUX_DEFAULT="splash" şeklinde boot etmem sanırım "quiet splash" şeklinde eski haline çevirip update-grup yapınca "dmesg" çıktısından kayboldu plymouth hataları.

[heartsmagic]

Etiket için teşekkürler. Esasında 44-46 gayet güzel bir sıcaklık değeri, hiç dert etmeye değmez  Fakat tlp uygulamasına bir göz gezdirebilirsin. ACPI hataları sıcaklık ile ilgili değil gibi ama çok emin değilim. Ayrıca konuşmak istersen sıcaklık konusu için mevcut bir başlık varsa oradan, olmadı yeni bir başkasından devam edebiliriz.