14.04 LTS klavye mouse sorunu

[alparslanahmed]

Merhabalar,
Ubuntu 14.04 (64 bit) ü Windows 7 dual boot olarak yükledim. Windowsda, live usb de ve kurulum sırasında çalışan klavye ve mouse grub dan sonra çalışmıyor. Recovery modunda da çalışmıyor. Ne yapmam gerekli?

[heartsmagic]

Dizüstü müdür bu? Eğer öyleyse marka ve modeli nedir?

[alparslanahmed]

Dizüstü değil masaüstü bilgisayar. Ubuntunun eski versiyonlarında herhangi bir sıkıntı yok. Donanımda da sıkıntı yok.

[if]

Kod Seç Genişlet

llsusb
xinput list
cat /var/log/Xorg.0.log
dmesg çıktılarını kod etiketi içinde buraya geçin.

[alparslanahmed]

Live USB konsoldan  aldim.

Kod Seç Genişlet

ubuntu@ubuntu:~$ lsusb
Bus 001 Device 004: ID 0781:5567 SanDisk Corp. Cruzer Blade
Bus 001 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 045e:0752 Microsoft Corp. Wired Keyboard 400
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


Kod Seç Genişlet

ubuntu@ubuntu:~$ xinput list
⎡ Virtual core pointer                    id=2 [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              id=4 [slave  pointer  (2)]
⎜   ↳ Logitech USB Receiver                    id=9 [slave  pointer  (2)]
⎜   ↳ Logitech USB Receiver                    id=10 [slave  pointer  (2)]
⎣ Virtual core keyboard                    id=3 [master keyboard (2)]
    ↳ Virtual core XTEST keyboard              id=5 [slave  keyboard (3)]
    ↳ Power Button                            id=6 [slave  keyboard (3)]
    ↳ Power Button                            id=7 [slave  keyboard (3)]
    ↳ Microsoft Wired Keyboard 400            id=8 [slave  keyboard (3)]


Kod Seç Genişlet

[    55.918] (II) RADEON(0): First detailed timing is preferred mode
[    55.918] (II) RADEON(0): redX: 0.637 redY: 0.338   greenX: 0.295 greenY: 0.595
[    55.918] (II) RADEON(0): blueX: 0.146 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[    55.918] (II) RADEON(0): Supported established timings:
[    55.918] (II) RADEON(0): 720x400@70Hz
[    55.918] (II) RADEON(0): 640x480@60Hz
[    55.918] (II) RADEON(0): 640x480@67Hz
[    55.918] (II) RADEON(0): 640x480@72Hz
[    55.918] (II) RADEON(0): 640x480@75Hz
[    55.918] (II) RADEON(0): 800x600@56Hz
[    55.918] (II) RADEON(0): 800x600@60Hz
[    55.918] (II) RADEON(0): 800x600@72Hz
[    55.918] (II) RADEON(0): 800x600@75Hz
[    55.918] (II) RADEON(0): 832x624@75Hz
[    55.918] (II) RADEON(0): 1024x768@60Hz
[    55.918] (II) RADEON(0): 1024x768@70Hz
[    55.918] (II) RADEON(0): 1024x768@75Hz
[    55.918] (II) RADEON(0): Manufacturer's mask: 0
[    55.918] (II) RADEON(0): Supported standard timings:
[    55.918] (II) RADEON(0): #0: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    55.918] (II) RADEON(0): #1: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    55.918] (II) RADEON(0): Supported detailed timing:
[    55.918] (II) RADEON(0): clock: 85.5 MHz   Image Size:  410 x 230 mm
[    55.918] (II) RADEON(0): h_active: 1366  h_sync: 1436  h_sync_end 1579 h_blank_end 1792 h_border: 0
[    55.918] (II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 774 v_blanking: 798 v_border: 0
[    55.918] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 83 kHz, PixClock max 145 MHz
[    55.918] (II) RADEON(0): Monitor name: Acer P196HQV
[    55.918] (II) RADEON(0): Serial No: LPY0W0054332
[    55.918] (II) RADEON(0): EDID (in hex):
[    55.918] (II) RADEON(0): 00ffffffffffff000472cb0117380004
[    55.918] (II) RADEON(0): 281401036c291778ea2985a3564b9825
[    55.918] (II) RADEON(0): 125054bfee0081c08100010101010101
[    55.918] (II) RADEON(0): 010101010101662156aa51001e30468f
[    55.918] (II) RADEON(0): 33009ae61000001e000000fd00384b1f
[    55.918] (II) RADEON(0): 530e000a202020202020000000fc0041
[    55.918] (II) RADEON(0): 63657220503139364851560a000000ff
[    55.918] (II) RADEON(0): 004c50593057303035343333320a0037
[    55.918] (II) RADEON(0): Printing probed modes for output DVI-0
[    55.918] (II) RADEON(0): Modeline "1366x768"x59.8   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz eP)
[    55.918] (II) RADEON(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 +hsync -vsync (49.7 kHz e)
[    55.918] (II) RADEON(0): Modeline "1280x720"x60.0   74.44  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.7 kHz)
[    55.918] (II) RADEON(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    55.918] (II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    55.918] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    55.919] (II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    55.919] (II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    55.919] (II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    55.919] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    55.919] (II) RADEON(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    55.919] (II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    55.919] (II) RADEON(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    55.919] (II) RADEON(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    55.919] (II) RADEON(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    55.919] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    55.964] (II) RADEON(0): EDID for output S-video
[    56.012] (II) RADEON(0): EDID for output DVI-1
[    56.012] (II) RADEON(0): Output DVI-0 connected
[    56.012] (II) RADEON(0): Output S-video disconnected
[    56.012] (II) RADEON(0): Output DVI-1 disconnected
[    56.012] (II) RADEON(0): Using exact sizes for initial modes
[    56.012] (II) RADEON(0): Output DVI-0 using initial mode 1366x768
[    56.012] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    56.012] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:20000000 visible:1fba0000
[    56.012] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[    56.012] (==) RADEON(0): DPI set to (96, 96)
[    56.012] (II) Loading sub module "fb"
[    56.012] (II) LoadModule: "fb"
[    56.012] (II) Loading /usr/lib/xorg/modules/libfb.so
[    56.012] (II) Module fb: vendor="X.Org Foundation"
[    56.012] compiled for 1.15.1, module version = 1.0.0
[    56.012] ABI class: X.Org ANSI C Emulation, version 0.4
[    56.012] (II) Loading sub module "ramdac"
[    56.012] (II) LoadModule: "ramdac"
[    56.012] (II) Module "ramdac" already built-in
[    56.012] (II) UnloadModule: "modesetting"
[    56.012] (II) Unloading modesetting
[    56.013] (II) UnloadModule: "fbdev"
[    56.013] (II) Unloading fbdev
[    56.013] (II) UnloadSubModule: "fbdevhw"
[    56.013] (II) Unloading fbdevhw
[    56.013] (II) UnloadModule: "vesa"
[    56.013] (II) Unloading vesa
[    56.013] (--) Depth 24 pixmap format is 32 bpp
[    56.013] (II) RADEON(0): [DRI2] Setup complete
[    56.013] (II) RADEON(0): [DRI2]   DRI driver: r300
[    56.013] (II) RADEON(0): [DRI2]   VDPAU driver: r300
[    56.013] (II) RADEON(0): Front buffer size: 4224K
[    56.013] (II) RADEON(0): VRAM usage limit set to 463996K
[    56.013] (==) RADEON(0): Backing store enabled
[    56.013] (II) RADEON(0): Direct rendering enabled
[    56.013] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[    56.013] (II) EXA(0): Driver allocated offscreen pixmaps
[    56.013] (II) EXA(0): Driver registered support for the following operations:
[    56.013] (II)         Solid
[    56.013] (II)         Copy
[    56.013] (II)         Composite (RENDER acceleration)
[    56.013] (II)         UploadToScreen
[    56.013] (II)         DownloadFromScreen
[    56.013] (II) RADEON(0): Acceleration enabled
[    56.013] (==) RADEON(0): DPMS enabled
[    56.013] (==) RADEON(0): Silken mouse enabled
[    56.013] (II) RADEON(0): Set up textured video
[    56.013] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[    56.013] (II) RADEON(0): [XvMC] Extension initialized.
[    56.013] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    56.013] (--) RandR disabled
[    56.021] (II) SELinux: Disabled on system
[    56.036] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    56.036] (II) AIGLX: enabled GLX_ARB_create_context
[    56.036] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    56.037] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    56.037] (II) AIGLX: enabled GLX_INTEL_swap_event
[    56.037] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    56.037] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    56.037] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    56.037] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    56.037] (II) AIGLX: Loaded and initialized r300
[    56.037] (II) GLX: Initialized DRI2 GL provider for screen 0
[    56.038] (II) RADEON(0): Setting screen physical size to 361 x 203
[    56.049] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    56.054] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    56.054] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    56.054] (II) LoadModule: "evdev"
[    56.054] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    56.054] (II) Module evdev: vendor="X.Org Foundation"
[    56.054] compiled for 1.15.0, module version = 2.8.2
[    56.054] Module class: X.Org XInput Driver
[    56.054] ABI class: X.Org XInput driver, version 20.0
[    56.054] (II) Using input driver 'evdev' for 'Power Button'
[    56.054] (**) Power Button: always reports core events
[    56.054] (**) evdev: Power Button: Device: "/dev/input/event1"
[    56.054] (--) evdev: Power Button: Vendor 0 Product 0x1
[    56.054] (--) evdev: Power Button: Found keys
[    56.054] (II) evdev: Power Button: Configuring as keyboard
[    56.054] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    56.054] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    56.054] (**) Option "xkb_rules" "evdev"
[    56.054] (**) Option "xkb_model" "pc104"
[    56.054] (**) Option "xkb_layout" "us"
[    56.059] (II) XKB: reuse xkmfile /var/lib/xkb/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm
[    56.060] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    56.060] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    56.060] (II) Using input driver 'evdev' for 'Power Button'
[    56.060] (**) Power Button: always reports core events
[    56.060] (**) evdev: Power Button: Device: "/dev/input/event0"
[    56.060] (--) evdev: Power Button: Vendor 0 Product 0x1
[    56.060] (--) evdev: Power Button: Found keys
[    56.060] (II) evdev: Power Button: Configuring as keyboard
[    56.060] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    56.060] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    56.060] (**) Option "xkb_rules" "evdev"
[    56.060] (**) Option "xkb_model" "pc104"
[    56.060] (**) Option "xkb_layout" "us"
[    56.060] (II) config/udev: Adding drm device (/dev/dri/card0)
[    56.060] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    56.061] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event5)
[    56.061] (II) No input driver specified, ignoring this device.
[    56.061] (II) This device may have been added with another device file.
[    56.061] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event7)
[    56.061] (II) No input driver specified, ignoring this device.
[    56.061] (II) This device may have been added with another device file.
[    56.061] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event6)
[    56.062] (II) No input driver specified, ignoring this device.
[    56.062] (II) This device may have been added with another device file.
[    56.062] (II) config/udev: Adding input device Microsoft Wired Keyboard 400 (/dev/input/event4)
[    56.062] (**) Microsoft Wired Keyboard 400: Applying InputClass "evdev keyboard catchall"
[    56.062] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 400'
[    56.062] (**) Microsoft Wired Keyboard 400: always reports core events
[    56.062] (**) evdev: Microsoft Wired Keyboard 400: Device: "/dev/input/event4"
[    56.062] (--) evdev: Microsoft Wired Keyboard 400: Vendor 0x45e Product 0x752
[    56.062] (--) evdev: Microsoft Wired Keyboard 400: Found keys
[    56.062] (II) evdev: Microsoft Wired Keyboard 400: Configuring as keyboard
[    56.062] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input6/event4"
[    56.062] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 400" (type: KEYBOARD, id 8)
[    56.062] (**) Option "xkb_rules" "evdev"
[    56.062] (**) Option "xkb_model" "pc104"
[    56.062] (**) Option "xkb_layout" "us"
[    56.063] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[    56.063] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    56.063] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    56.063] (**) Logitech USB Receiver: always reports core events
[    56.063] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[    56.063] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    56.063] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[    56.063] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    56.063] (--) evdev: Logitech USB Receiver: Found relative axes
[    56.063] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    56.063] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    56.063] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    56.063] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    56.063] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    56.063] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input4/event2"
[    56.063] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 9)
[    56.063] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    56.063] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    56.063] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    56.063] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    56.063] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    56.064] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    56.064] (II) No input driver specified, ignoring this device.
[    56.064] (II) This device may have been added with another device file.
[    56.064] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[    56.064] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    56.064] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    56.064] (**) Logitech USB Receiver: always reports core events
[    56.064] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[    56.064] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    56.064] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[    56.064] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    56.064] (--) evdev: Logitech USB Receiver: Found relative axes
[    56.064] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[    56.064] (--) evdev: Logitech USB Receiver: Found absolute axes
[    56.064] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[    56.064] (--) evdev: Logitech USB Receiver: Found keys
[    56.064] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    56.064] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    56.064] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    56.064] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    56.064] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    56.064] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/input/input5/event3"
[    56.064] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[    56.064] (**) Option "xkb_rules" "evdev"
[    56.064] (**) Option "xkb_model" "pc104"
[    56.064] (**) Option "xkb_layout" "us"
[    56.064] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    56.064] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    56.065] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    56.065] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    56.065] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    56.065] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    57.029] (II) XKB: reuse xkmfile /var/lib/xkb/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm
[    61.836] (II) RADEON(0): EDID vendor "ACR", prod id 459
[    61.836] (II) RADEON(0): Using EDID range info for horizontal sync
[    61.836] (II) RADEON(0): Using EDID range info for vertical refresh
[    61.836] (II) RADEON(0): Printing DDC gathered Modelines:
[    61.836] (II) RADEON(0): Modeline "1366x768"x0.0   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz eP)
[    61.836] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    61.836] (II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    61.836] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    61.836] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    61.836] (II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    61.836] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    61.836] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    61.836] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    61.836] (II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    61.836] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    61.836] (II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    61.836] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    61.836] (II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    61.836] (II) RADEON(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    61.836] (II) RADEON(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    62.485] (II) RADEON(0): EDID vendor "ACR", prod id 459
[    62.486] (II) RADEON(0): Using hsync ranges from config file
[    62.486] (II) RADEON(0): Using vrefresh ranges from config file
[    62.486] (II) RADEON(0): Printing DDC gathered Modelines:
[    62.486] (II) RADEON(0): Modeline "1366x768"x0.0   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz eP)
[    62.486] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    62.486] (II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    62.486] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    62.486] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    62.486] (II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    62.486] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    62.486] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    62.486] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    62.486] (II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    62.486] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    62.486] (II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    62.486] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    62.486] (II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    62.486] (II) RADEON(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    62.486] (II) RADEON(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    62.822] (II) XKB: reuse xkmfile /var/lib/xkb/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm
[    62.891] (II) XKB: reuse xkmfile /var/lib/xkb/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm
[    63.225] (II) RADEON(0): EDID vendor "ACR", prod id 459
[    63.225] (II) RADEON(0): Using hsync ranges from config file
[    63.225] (II) RADEON(0): Using vrefresh ranges from config file
[    63.225] (II) RADEON(0): Printing DDC gathered Modelines:
[    63.225] (II) RADEON(0): Modeline "1366x768"x0.0   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz eP)
[    63.225] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    63.225] (II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    63.225] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    63.225] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    63.225] (II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    63.225] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    63.225] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    63.225] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    63.225] (II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    63.225] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    63.225] (II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    63.225] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    63.225] (II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    63.225] (II) RADEON(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    63.225] (II) RADEON(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    65.040] (II) RADEON(0): EDID vendor "ACR", prod id 459
[    65.040] (II) RADEON(0): Using hsync ranges from config file
[    65.040] (II) RADEON(0): Using vrefresh ranges from config file
[    65.040] (II) RADEON(0): Printing DDC gathered Modelines:
[    65.040] (II) RADEON(0): Modeline "1366x768"x0.0   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz eP)
[    65.040] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    65.040] (II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    65.040] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    65.040] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    65.040] (II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    65.040] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    65.040] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    65.040] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    65.040] (II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    65.040] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    65.040] (II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    65.040] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    65.040] (II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    65.040] (II) RADEON(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    65.040] (II) RADEON(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    65.485] (II) RADEON(0): EDID vendor "ACR", prod id 459
[    65.485] (II) RADEON(0): Using hsync ranges from config file
[    65.485] (II) RADEON(0): Using vrefresh ranges from config file
[    65.485] (II) RADEON(0): Printing DDC gathered Modelines:
[    65.485] (II) RADEON(0): Modeline "1366x768"x0.0   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz eP)
[    65.485] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    65.485] (II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    65.485] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    65.485] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    65.485] (II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    65.485] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    65.485] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    65.485] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    65.485] (II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    65.485] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    65.485] (II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    65.485] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    65.485] (II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    65.485] (II) RADEON(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    65.486] (II) RADEON(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    66.695] (II) XKB: reuse xkmfile /var/lib/xkb/server-AFD2D98FF09E13019ED2D58EAA41AAC6F99A79C5.xkm
[    79.362] (II) RADEON(0): EDID vendor "ACR", prod id 459
[    79.362] (II) RADEON(0): Using hsync ranges from config file
[    79.362] (II) RADEON(0): Using vrefresh ranges from config file
[    79.362] (II) RADEON(0): Printing DDC gathered Modelines:
[    79.362] (II) RADEON(0): Modeline "1366x768"x0.0   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz eP)
[    79.362] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    79.362] (II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    79.362] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    79.362] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    79.362] (II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    79.362] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    79.362] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    79.362] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    79.362] (II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    79.362] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    79.362] (II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    79.362] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    79.362] (II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    79.362] (II) RADEON(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    79.362] (II) RADEON(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)


Kod Seç Genişlet

[    0.109284] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.109353] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
[    0.109566] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.109575] ACPI: \_SB_.PCI0: notify handler is installed
[    0.109612] Found 1 acpi root devices
[    0.109723] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.109723] vgaarb: loaded
[    0.109723] vgaarb: bridge control possible 0000:01:00.0
[    0.109723] SCSI subsystem initialized
[    0.109723] libata version 3.00 loaded.
[    0.109723] ACPI: bus type USB registered
[    0.109723] usbcore: registered new interface driver usbfs
[    0.109723] usbcore: registered new interface driver hub
[    0.109723] usbcore: registered new device driver usb
[    0.109723] PCI: Using ACPI for IRQ routing
[    0.109723] PCI: pci_cache_line_size set to 64 bytes
[    0.109723] e820: reserve RAM buffer [mem 0x00098400-0x0009ffff]
[    0.109723] e820: reserve RAM buffer [mem 0x7fedf800-0x7fffffff]
[    0.109723] NetLabel: Initializing
[    0.109723] NetLabel:  domain hash size = 128
[    0.109723] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.109723] NetLabel:  unlabeled traffic allowed by default
[    0.112056] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.112061] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.112066] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.114086] Switched to clocksource hpet
[    0.120799] AppArmor: AppArmor Filesystem Enabled
[    0.120849] pnp: PnP ACPI init
[    0.120870] ACPI: bus type PNP registered
[    0.121086] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.121089] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.121092] system 00:00: [io  0x0294-0x0297] has been reserved
[    0.121095] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.121100] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.121113] pnp 00:01: [dma 4]
[    0.121136] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.121232] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.121280] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.121312] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.121347] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.121505] system 00:06: [io  0x0400-0x04bf] has been reserved
[    0.121510] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.121554] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
[    0.121789] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.121793] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.121979] system 00:09: [mem 0x000d4800-0x000d7fff] has been reserved
[    0.121983] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.121986] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.121989] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.121992] system 00:09: [mem 0xfed00000-0xfed000ff] has been reserved
[    0.121995] system 00:09: [mem 0x7fee0000-0x7fefffff] could not be reserved
[    0.121998] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.122001] system 00:09: [mem 0x00100000-0x7fedffff] could not be reserved
[    0.122004] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.122007] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.122010] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.122013] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[    0.122016] system 00:09: [mem 0x000e0000-0x000effff] has been reserved
[    0.122019] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.122030] pnp: PnP ACPI: found 10 devices
[    0.122032] ACPI: bus type PNP unregistered
[    0.129120] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.129125] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.129129] pci 0000:00:01.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.129133] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.129139] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.129142] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.129147] pci 0000:00:1e.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.129156] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.129159] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.129162] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.129164] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
[    0.129167] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.129170] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.129172] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.129175] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.129177] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
[    0.129220] NET: Registered protocol family 2
[    0.129410] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.129505] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.129636] TCP: Hash tables configured (established 16384 bind 16384)
[    0.129688] TCP: reno registered
[    0.129694] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.129716] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.129793] NET: Registered protocol family 1
[    0.130588] pci 0000:01:00.0: Boot video device
[    0.130605] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[    0.130610] PCI: CLS 32 bytes, default 64
[    0.130702] Trying to unpack rootfs image as initramfs...
[    5.041207] Freeing initrd memory: 20168K (ffff88007eb2d000 - ffff88007fedf000)
[    5.041506] microcode: CPU0 sig=0x6f6, pf=0x1, revision=0x44
[    5.041513] microcode: CPU1 sig=0x6f6, pf=0x1, revision=0x44
[    5.041632] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    5.041635] Scanning for low memory corruption every 60 seconds
[    5.041944] Initialise system trusted keyring
[    5.042016] audit: initializing netlink socket (disabled)
[    5.042034] type=2000 audit(1402919819.036:1): initialized
[    5.074050] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    5.075691] VFS: Disk quotas dquot_6.5.2
[    5.075743] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    5.076349] fuse init (API version 7.22)
[    5.076455] msgmni has been set to 3995
[    5.076518] Key type big_key registered
[    5.076984] Key type asymmetric registered
[    5.076986] Asymmetric key parser 'x509' registered
[    5.077026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    5.077066] io scheduler noop registered
[    5.077068] io scheduler deadline registered (default)
[    5.077099] io scheduler cfq registered
[    5.077330] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    5.077402] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    5.077419] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    5.077479] intel_idle: does not run on family 6 model 15
[    5.077487] ipmi message handler version 39.2
[    5.077551] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    5.077557] ACPI: Power Button [PWRB]
[    5.077622] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    5.077625] ACPI: Power Button [PWRF]
[    5.077675] ACPI: Fan [FAN] (on)
[    5.078077] thermal LNXTHERM:00: registered as thermal_zone0
[    5.078080] ACPI: Thermal Zone [THRM] (-269 C)
[    5.078111] GHES: HEST is not enabled!
[    5.078226] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    5.079930] Linux agpgart interface v0.103
[    5.081693] brd: module loaded
[    5.082560] loop: module loaded
[    5.082704] ata_piix 0000:00:1f.1: version 2.13
[    5.083339] scsi0 : ata_piix
[    5.083426] scsi1 : ata_piix
[    5.083470] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
[    5.083472] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
[    5.083537] ata2: port disabled--ignoring
[    5.083830] libphy: Fixed MDIO Bus: probed
[    5.083939] tun: Universal TUN/TAP device driver, 1.6
[    5.083941] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    5.084020] PPP generic driver version 2.4.2
[    5.084067] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.084073] ehci-pci: EHCI PCI platform driver
[    5.084203] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    5.084212] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    5.088115] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    5.088135] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdfff000
[    5.100038] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    5.100119] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.100123] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.100127] usb usb1: Product: EHCI Host Controller
[    5.100130] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    5.100133] usb usb1: SerialNumber: 0000:00:1d.7
[    5.100279] hub 1-0:1.0: USB hub found
[    5.100291] hub 1-0:1.0: 8 ports detected
[    5.100494] ehci-platform: EHCI generic platform driver
[    5.100504] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.100506] ohci-pci: OHCI PCI platform driver
[    5.100518] ohci-platform: OHCI generic platform driver
[    5.100526] uhci_hcd: USB Universal Host Controller Interface driver
[    5.100624] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.100630] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    5.100654] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
[    5.100713] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    5.100717] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.100719] usb usb2: Product: UHCI Host Controller
[    5.100722] usb usb2: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    5.100724] usb usb2: SerialNumber: 0000:00:1d.0
[    5.100837] hub 2-0:1.0: USB hub found
[    5.100847] hub 2-0:1.0: 2 ports detected
[    5.101019] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.101026] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    5.101059] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
[    5.101118] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.101121] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.101124] usb usb3: Product: UHCI Host Controller
[    5.101127] usb usb3: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    5.101129] usb usb3: SerialNumber: 0000:00:1d.1
[    5.101233] hub 3-0:1.0: USB hub found
[    5.101242] hub 3-0:1.0: 2 ports detected
[    5.101412] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.101418] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    5.101451] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
[    5.101511] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    5.101514] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.101516] usb usb4: Product: UHCI Host Controller
[    5.101519] usb usb4: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    5.101521] usb usb4: SerialNumber: 0000:00:1d.2
[    5.101622] hub 4-0:1.0: USB hub found
[    5.101632] hub 4-0:1.0: 2 ports detected
[    5.101807] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    5.101818] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    5.101852] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[    5.101911] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    5.101914] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.101917] usb usb5: Product: UHCI Host Controller
[    5.101920] usb usb5: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[    5.101922] usb usb5: SerialNumber: 0000:00:1d.3
[    5.102021] hub 5-0:1.0: USB hub found
[    5.102033] hub 5-0:1.0: 2 ports detected
[    5.102185] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    5.104654] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.104661] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.104801] mousedev: PS/2 mouse device common for all mice
[    5.104951] rtc_cmos 00:03: RTC can wake from S4
[    5.105074] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    5.105099] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    5.105175] device-mapper: uevent: version 1.0.3
[    5.105258] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    5.105267] ledtrig-cpu: registered to indicate activity on CPUs
[    5.105388] TCP: cubic registered
[    5.105497] NET: Registered protocol family 10
[    5.105717] NET: Registered protocol family 17
[    5.105730] Key type dns_resolver registered
[    5.106000] Loading compiled-in X.509 certificates
[    5.107242] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
[    5.107258] registered taskstats version 1
[    5.110441] Key type trusted registered
[    5.113127] Key type encrypted registered
[    5.115744] AppArmor: AppArmor sha1 policy hashing enabled
[    5.115748] IMA: No TPM chip found, activating TPM-bypass!
[    5.115975] regulator-dummy: disabling
[    5.116033]   Magic number: 2:259:934
[    5.116164] rtc_cmos 00:03: setting system clock to 2014-06-16 11:56:59 UTC (1402919819)
[    5.116982] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    5.116985] EDD information not available.
[    5.117023] PM: Hibernation image not present or could not be loaded.
[    5.253026] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
[    5.253029] Write protecting the kernel read-only data: 12288k
[    5.255962] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
[    5.258438] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
[    5.278260] systemd-udevd[109]: starting version 204
[    5.312595] [drm] Initialized drm 1.1.0 20060810
[    5.326427] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    5.326431] e100: Copyright(c) 1999-2006 Intel Corporation
[    5.346717] [drm] radeon kernel modesetting enabled.
[    5.347080] [drm] initializing kernel modesetting (RV515 0x1002:0x7181 0x1462:0x0400).
[    5.347100] [drm] register mmio base: 0xFDDF0000
[    5.347102] [drm] register mmio size: 65536
[    5.347937] ATOM BIOS: 113
[    5.347954] [drm] Generation 2 PCI interface, using max accessible memory
[    5.347960] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[    5.347963] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[    5.347979] [drm] Detected VRAM RAM=512M, BAR=256M
[    5.347981] [drm] RAM width 128bits DDR
[    5.350376] e100 0000:02:08.0 eth0: addr 0xfdefe000, irq 20, MAC addr 00:11:2f:fd:1d:6f
[    5.350537] [TTM] Zone  kernel: Available graphics memory: 1024318 kiB
[    5.350540] [TTM] Initializing pool allocator
[    5.350545] [TTM] Initializing DMA pool allocator
[    5.350572] [drm] radeon: 512M of VRAM memory ready
[    5.350574] [drm] radeon: 512M of GTT memory ready.
[    5.350601] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    5.353855] ahci 0000:00:1f.2: version 3.0
[    5.354034] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    5.354104] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
[    5.354108] ahci 0000:00:1f.2: flags: 64bit ncq led clo
[    5.355081] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[    5.356057] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[    5.356178] radeon 0000:01:00.0: WB enabled
[    5.356183] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000000 and cpu addr 0xffff880079fd3000
[    5.356186] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.356187] [drm] Driver supports precise vblank timestamp query.
[    5.356201] [drm] radeon: irq initialized.
[    5.356219] [drm] Loading R500 Microcode
[    5.356407] [drm] radeon: ring at 0x0000000020001000
[    5.356438] [drm] ring test succeeded in 7 usecs
[    5.356598] [drm] ib test succeeded in 0 usecs
[    5.356922] [drm] Radeon Display Connectors
[    5.356924] [drm] Connector 0:
[    5.356926] [drm]   DVI-I-1
[    5.356928] [drm]   HPD2
[    5.356931] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    5.356932] [drm]   Encoders:
[    5.356934] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    5.356936] [drm]     DFP3: INTERNAL_LVTM1
[    5.356937] [drm] Connector 1:
[    5.356939] [drm]   SVIDEO-1
[    5.356940] [drm]   Encoders:
[    5.356941] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[    5.356943] [drm] Connector 2:
[    5.356944] [drm]   DVI-I-2
[    5.356946] [drm]   HPD1
[    5.356948] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    5.356949] [drm]   Encoders:
[    5.356951] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    5.356952] [drm]     DFP1: INTERNAL_KLDSCP_TMDS1
[    5.357092] scsi2 : ahci
[    5.359926] scsi3 : ahci
[    5.363573] scsi4 : ahci
[    5.367282] scsi5 : ahci
[    5.367347] ata3: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 41
[    5.367351] ata4: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe180 irq 41
[    5.367354] ata5: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe200 irq 41
[    5.367357] ata6: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe280 irq 41
[    5.434371] [drm] fb mappable at 0xE00C0000
[    5.434376] [drm] vram apper at 0xE0000000
[    5.434377] [drm] size 4325376
[    5.434379] [drm] fb depth is 24
[    5.434381] [drm]    pitch is 5632
[    5.435130] fbcon: radeondrmfb (fb0) is primary device
[    5.440079] firewire_ohci 0000:02:01.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[    5.451309] Console: switching to colour frame buffer device 170x48
[    5.454371] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    5.454374] radeon 0000:01:00.0: registered panic notifier
[    5.454380] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[    5.468086] usb 1-5: new high-speed USB device number 3 using ehci-pci
[    5.606201] usb 1-5: New USB device found, idVendor=058f, idProduct=6362
[    5.606206] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.606209] usb 1-5: Product: Mass Storage Device
[    5.606213] usb 1-5: Manufacturer: Generic
[    5.606216] usb 1-5: SerialNumber: 058F312D81B
[    5.684066] ata5: SATA link down (SStatus 0 SControl 300)
[    5.684092] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.684982] ata4.00: ATA-7: ST3160828AS, 3.02, max UDMA/100
[    5.684986] ata4.00: 312581808 sectors, multi 16: LBA48
[    5.686040] ata4.00: configured for UDMA/100
[    5.688083] ata3: SATA link down (SStatus 0 SControl 300)
[    5.688101] ata6: SATA link down (SStatus 0 SControl 300)
[    5.688278] scsi 3:0:0:0: Direct-Access     ATA      ST3160828AS      3.02 PQ: 0 ANSI: 5
[    5.688464] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    5.688474] sd 3:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    5.688566] sd 3:0:0:0: [sda] Write Protect is off
[    5.688570] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.688615] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.716080] usb 1-7: new high-speed USB device number 4 using ehci-pci
[    5.736999]  sda: sda1 sda2 sda3 < sda5 > sda4
[    5.737492] sd 3:0:0:0: [sda] Attached SCSI disk
[    5.848957] usb 1-7: New USB device found, idVendor=0781, idProduct=5567
[    5.848963] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.848967] usb 1-7: Product: Cruzer Blade
[    5.848970] usb 1-7: Manufacturer: SanDisk
[    5.848973] usb 1-7: SerialNumber: 20043516711D97C33A51
[    5.940162] firewire_core 0000:02:01.0: created device fw0: GUID 0011d800010bf890, S400
[    6.040081] tsc: Refined TSC clocksource calibration: 2133.938 MHz
[    6.114892] usb-storage 1-5:1.0: USB Mass Storage device detected
[    6.114996] scsi6 : usb-storage 1-5:1.0
[    6.115086] usb-storage 1-7:1.0: USB Mass Storage device detected
[    6.115150] scsi7 : usb-storage 1-7:1.0
[    6.115217] usbcore: registered new interface driver usb-storage
[    6.348088] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[    6.530939] usb 5-2: New USB device found, idVendor=046d, idProduct=c52f
[    6.530945] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.530949] usb 5-2: Product: USB Receiver
[    6.530952] usb 5-2: Manufacturer: Logitech
[    6.540884] hidraw: raw HID events driver (C) Jiri Kosina
[    6.547291] usbcore: registered new interface driver usbhid
[    6.547295] usbhid: USB HID core driver
[    6.549445] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input4
[    6.549909] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-2/input0
[    6.553059] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/input/input5
[    6.553577] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.3-2/input1
[    6.904218] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[    7.040136] Switched to clocksource tsc
[    7.079190] usb 2-1: New USB device found, idVendor=045e, idProduct=0752
[    7.079195] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.079199] usb 2-1: Product: Wired Keyboard 400
[    7.079203] usb 2-1: Manufacturer: Microsoft
[    7.097733] input: Microsoft Wired Keyboard 400 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input6
[    7.097861] hid-generic 0003:045E:0752.0003: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 400] on usb-0000:00:1d.0-1/input0
[    7.112650] scsi 7:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.26 PQ: 0 ANSI: 5
[    7.112922] scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    7.112992] sd 7:0:0:0: Attached scsi generic sg1 type 0
[    7.113761] scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    7.113813] sd 7:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    7.114400] scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    7.114757] sd 7:0:0:0: [sdb] Write Protect is off
[    7.114763] sd 7:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    7.115021] scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    7.115332] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    7.115557] sd 6:0:0:1: Attached scsi generic sg3 type 0
[    7.115775] sd 6:0:0:2: Attached scsi generic sg4 type 0
[    7.115796] sd 7:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    7.116090] sd 6:0:0:3: Attached scsi generic sg5 type 0
[    7.122272] random: nonblocking pool is initialized
[    7.122304]  sdb: sdb1
[    7.125638] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[    7.130150] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    7.130886] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[    7.132264] sd 6:0:0:2: [sde] Attached SCSI removable disk
[    7.133637] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[    8.883311] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   10.098856] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   21.042200] Adding 102396k swap on /dev/sda1.  Priority:-1 extents:1 across:102396k FS
[   21.097314] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.295735] systemd-udevd[1101]: starting version 204
[   21.613900] lp: driver loaded but no devices found
[   21.642093] ppdev: user-space parallel port driver
[   21.708397] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PM2S 1 (20131115/utaddress-251)
[   21.708406] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PM1K 2 (20131115/utaddress-251)
[   21.708411] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPE1 3 (20131115/utaddress-251)
[   21.708415] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.708419] ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \GPO2 1 (20131115/utaddress-251)
[   21.708423] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.708425] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPIV 1 (20131115/utaddress-251)
[   21.708430] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPO_ 2 (20131115/utaddress-251)
[   21.708434] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \PALD 3 (20131115/utaddress-251)
[   21.708438] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.708440] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   21.757758] leds_ss4200: no LED devices found
[   21.808606] Bluetooth: Core ver 2.17
[   21.808662] NET: Registered protocol family 31
[   21.808665] Bluetooth: HCI device and connection manager initialized
[   21.808676] Bluetooth: HCI socket layer initialized
[   21.808679] Bluetooth: L2CAP socket layer initialized
[   21.808685] Bluetooth: SCO socket layer initialized
[   21.870138] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.870143] Bluetooth: BNEP filters: protocol multicast
[   21.870157] Bluetooth: BNEP socket layer initialized
[   21.917974] Bluetooth: RFCOMM TTY layer initialized
[   21.917991] Bluetooth: RFCOMM socket layer initialized
[   21.917999] Bluetooth: RFCOMM ver 1.11
[   22.138425] init: cups main process (1194) killed by HUP signal
[   22.138447] init: cups main process ended, respawning
[   22.304474] coretemp coretemp.0: Using relative temperature scale!
[   22.304489] coretemp coretemp.0: Using relative temperature scale!
[   22.508102] device-mapper: multipath: version 1.6.0 loaded
[   22.628623] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[   22.665768] hda_codec: ALC888: SKU not ready 0x411111f0
[   22.669139] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   22.669144]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   22.669146]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   22.669148]    mono: mono_out=0x0
[   22.669150]    dig-out=0x1e/0x0
[   22.669151]    inputs:
[   22.669154]      Rear Mic=0x18
[   22.669156]      Front Mic=0x19
[   22.669158]      Line=0x1a
[   22.669160]      Line=0x1c
[   22.669161]    dig-in=0x1f
[   22.669164] realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
[   22.669166] realtek: Enable default setup for auto mode as fallback
[   22.795340] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   22.797928] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   22.799441] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   22.908090] init: failsafe main process (1357) killed by TERM signal
[   23.801109] init: alsa-restore main process (1690) terminated with status 99
[   24.273148] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.273937] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.276169] e100 0000:02:08.0 eth0: NIC Link is Up 100 Mbps Full Duplex
[   24.276379] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   27.443603] init: plymouth-upstart-bridge main process ended, respawning
[   27.460287] init: plymouth-upstart-bridge main process ended, respawning


[if]

@alparslanahmed, çıktılarda bir sorun görünmüyor. Farklı usb porta takınca bir gelişme var mı? Ya da çıkartıp tekrar takmak işe yarıyor mu?

[alparslanahmed]

Hayır değişen bir durum yok.

[if]

Bu sorunu geliştiricilere bildirebiliriz.

[heartsmagic]

Etrafta görünen bir hata kaydı da yok, şunu gördüm sadece:
http://ubuntuforums.org/showthread.php?t=1904058

Oradaki ilk öneri klavyenin başlangıçta takılı olmaması, sonradan takılması. Bunu denemediysen bir dener misin? Ayrıca taktıktan hemen sonra şu komutun çıktısını da buraya geç lütfen:

Kod Seç Genişlet

dmesg | tail

Fakat, bu öneri "dizüstü" sahibi birinde iş görmüş, son yorumu yapan kullanıcı masaüstü sahibi ve yukarıdaki öneri onda işe yaramamış.